14 files changed, 156 insertions, 37 deletions

diff --git a/drivers/input/keyboard/cap1106.c b/drivers/input/keyboard/cap1106.c
index 180b184ab90f..d70b65a14ced 100644
--- a/drivers/input/keyboard/cap1106.c
+++ b/drivers/input/keyboard/cap1106.c
@@ -33,8 +33,8 @@
 #define CAP1106_REG_SENSOR_CONFIG       0x22
 #define CAP1106_REG_SENSOR_CONFIG2      0x23
 #define CAP1106_REG_SAMPLING_CONFIG     0x24
-#define CAP1106_REG_CALIBRATION         0x25
-#define CAP1106_REG_INT_ENABLE          0x26
+#define CAP1106_REG_CALIBRATION         0x26
+#define CAP1106_REG_INT_ENABLE          0x27
 #define CAP1106_REG_REPEAT_RATE         0x28
 #define CAP1106_REG_MT_CONFIG           0x2a
 #define CAP1106_REG_MT_PATTERN_CONFIG   0x2b
diff --git a/drivers/input/keyboard/matrix_keypad.c b/drivers/input/keyboard/matrix_keypad.c
index 8d2e19e81e1e..e651fa692afe 100644
--- a/drivers/input/keyboard/matrix_keypad.c
+++ b/drivers/input/keyboard/matrix_keypad.c
@@ -332,23 +332,24 @@ static int matrix_keypad_init_gpio(struct platform_device *pdev,
         }
 
         if (pdata->clustered_irq > 0) {
-                err = request_irq(pdata->clustered_irq,
+                err = request_any_context_irq(pdata->clustered_irq,
                                 matrix_keypad_interrupt,
                                 pdata->clustered_irq_flags,
                                 "matrix-keypad", keypad);
-                if (err) {
+                if (err < 0) {
                         dev_err(&pdev->dev,
                                 "Unable to acquire clustered interrupt\n");
                         goto err_free_rows;
                 }
         } else {
                 for (i = 0; i < pdata->num_row_gpios; i++) {
-                        err = request_irq(gpio_to_irq(pdata->row_gpios[i]),
+                        err = request_any_context_irq(
+                                        gpio_to_irq(pdata->row_gpios[i]),
                                         matrix_keypad_interrupt,
                                         IRQF_TRIGGER_RISING |
                                         IRQF_TRIGGER_FALLING,
                                         "matrix-keypad", keypad);
-                        if (err) {
+                        if (err < 0) {
                                 dev_err(&pdev->dev,
                                         "Unable to acquire interrupt for GPIO line %i\n",
                                         pdata->row_gpios[i]);
diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c
index a956b980ee73..35a49bf57227 100644
--- a/drivers/input/mouse/alps.c
+++ b/drivers/input/mouse/alps.c
@@ -2373,6 +2373,10 @@ int alps_init(struct psmouse *psmouse)
         dev2->keybit[BIT_WORD(BTN_LEFT)] =
                 BIT_MASK(BTN_LEFT) | BIT_MASK(BTN_MIDDLE) | BIT_MASK(BTN_RIGHT);
 
+        __set_bit(INPUT_PROP_POINTER, dev2->propbit);
+        if (priv->flags & ALPS_DUALPOINT)
+                __set_bit(INPUT_PROP_POINTING_STICK, dev2->propbit);
+
         if (input_register_device(priv->dev2))
                 goto init_fail;
 
diff --git a/drivers/input/mouse/elantech.c b/drivers/input/mouse/elantech.c
index da51738eb59e..06fc6e76ffbe 100644
--- a/drivers/input/mouse/elantech.c
+++ b/drivers/input/mouse/elantech.c
@@ -1331,6 +1331,13 @@ static bool elantech_is_signature_valid(const unsigned char *param)
         if (param[1] == 0)
                 return true;
 
+        /*
+         * Some models have a revision higher then 20. Meaning param[2] may
+         * be 10 or 20, skip the rates check for these.
+         */
+        if (param[0] == 0x46 && (param[1] & 0xef) == 0x0f && param[2] < 40)
+                return true;
+
         for (i = 0; i < ARRAY_SIZE(rates); i++)
                 if (param[2] == rates[i])
                         return false;
@@ -1607,6 +1614,10 @@ int elantech_init(struct psmouse *psmouse)
                 tp_dev->keybit[BIT_WORD(BTN_LEFT)] =
                         BIT_MASK(BTN_LEFT) | BIT_MASK(BTN_MIDDLE) |
                         BIT_MASK(BTN_RIGHT);
+
+                __set_bit(INPUT_PROP_POINTER, tp_dev->propbit);
+                __set_bit(INPUT_PROP_POINTING_STICK, tp_dev->propbit);
+
                 error = input_register_device(etd->tp_dev);
                 if (error < 0)
                         goto init_fail_tp_reg;
diff --git a/drivers/input/mouse/psmouse-base.c b/drivers/input/mouse/psmouse-base.c
index cff065f6261c..b4e1f014ddc2 100644
--- a/drivers/input/mouse/psmouse-base.c
+++ b/drivers/input/mouse/psmouse-base.c
@@ -670,6 +670,8 @@ static void psmouse_apply_defaults(struct psmouse *psmouse)
         __set_bit(REL_X, input_dev->relbit);
         __set_bit(REL_Y, input_dev->relbit);
 
+        __set_bit(INPUT_PROP_POINTER, input_dev->propbit);
+
         psmouse->set_rate = psmouse_set_rate;
         psmouse->set_resolution = psmouse_set_resolution;
         psmouse->poll = psmouse_poll;
diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c
index e8573c68f77e..fd23181c1fb7 100644
--- a/drivers/input/mouse/synaptics.c
+++ b/drivers/input/mouse/synaptics.c
@@ -629,10 +629,61 @@ static int synaptics_parse_hw_state(const unsigned char buf[],
                          ((buf[0] & 0x04) >> 1) |
                          ((buf[3] & 0x04) >> 2));
 
+                if ((SYN_CAP_ADV_GESTURE(priv->ext_cap_0c) ||
+                        SYN_CAP_IMAGE_SENSOR(priv->ext_cap_0c)) &&
+                    hw->w == 2) {
+                        synaptics_parse_agm(buf, priv, hw);
+                        return 1;
+                }
+
+                hw->x = (((buf[3] & 0x10) << 8) |
+                         ((buf[1] & 0x0f) << 8) |
+                         buf[4]);
+                hw->y = (((buf[3] & 0x20) << 7) |
+                         ((buf[1] & 0xf0) << 4) |
+                         buf[5]);
+                hw->z = buf[2];
+
                 hw->left  = (buf[0] & 0x01) ? 1 : 0;
                 hw->right = (buf[0] & 0x02) ? 1 : 0;
 
-                if (SYN_CAP_CLICKPAD(priv->ext_cap_0c)) {
+                if (SYN_CAP_FORCEPAD(priv->ext_cap_0c)) {
+                        /*
+                         * ForcePads, like Clickpads, use middle button
+                         * bits to report primary button clicks.
+                         * Unfortunately they report primary button not
+                         * only when user presses on the pad above certain
+                         * threshold, but also when there are more than one
+                         * finger on the touchpad, which interferes with
+                         * out multi-finger gestures.
+                         */
+                        if (hw->z == 0) {
+                                /* No contacts */
+                                priv->press = priv->report_press = false;
+                        } else if (hw->w >= 4 && ((buf[0] ^ buf[3]) & 0x01)) {
+                                /*
+                                 * Single-finger touch with pressure above
+                                 * the threshold. If pressure stays long
+                                 * enough, we'll start reporting primary
+                                 * button. We rely on the device continuing
+                                 * sending data even if finger does not
+                                 * move.
+                                 */
+                                if  (!priv->press) {
+                                        priv->press_start = jiffies;
+                                        priv->press = true;
+                                } else if (time_after(jiffies,
+                                                priv->press_start +
+                                                        msecs_to_jiffies(50))) {
+                                        priv->report_press = true;
+                                }
+                        } else {
+                                priv->press = false;
+                        }
+
+                        hw->left = priv->report_press;
+
+                } else if (SYN_CAP_CLICKPAD(priv->ext_cap_0c)) {
                         /*
                          * Clickpad's button is transmitted as middle button,
                          * however, since it is primary button, we will report
@@ -651,21 +702,6 @@ static int synaptics_parse_hw_state(const unsigned char buf[],
                         hw->down = ((buf[0] ^ buf[3]) & 0x02) ? 1 : 0;
                 }
 
-                if ((SYN_CAP_ADV_GESTURE(priv->ext_cap_0c) ||
-                        SYN_CAP_IMAGE_SENSOR(priv->ext_cap_0c)) &&
-                    hw->w == 2) {
-                        synaptics_parse_agm(buf, priv, hw);
-                        return 1;
-                }
-
-                hw->x = (((buf[3] & 0x10) << 8) |
-                         ((buf[1] & 0x0f) << 8) |
-                         buf[4]);
-                hw->y = (((buf[3] & 0x20) << 7) |
-                         ((buf[1] & 0xf0) << 4) |
-                         buf[5]);
-                hw->z = buf[2];
-
                 if (SYN_CAP_MULTI_BUTTON_NO(priv->ext_cap) &&
                     ((buf[0] ^ buf[3]) & 0x02)) {
                         switch (SYN_CAP_MULTI_BUTTON_NO(priv->ext_cap) & ~0x01) {
diff --git a/drivers/input/mouse/synaptics.h b/drivers/input/mouse/synaptics.h
index e594af0b264b..fb2e076738ae 100644
--- a/drivers/input/mouse/synaptics.h
+++ b/drivers/input/mouse/synaptics.h
@@ -78,6 +78,11 @@
  * 2    0x08    image sensor            image sensor tracks 5 fingers, but only
  *                                      reports 2.
  * 2    0x20    report min              query 0x0f gives min coord reported
+ * 2    0x80    forcepad                forcepad is a variant of clickpad that
+ *                                      does not have physical buttons but rather
+ *                                      uses pressure above certain threshold to
+ *                                      report primary clicks. Forcepads also have
+ *                                      clickpad bit set.
  */
 #define SYN_CAP_CLICKPAD(ex0c)          ((ex0c) & 0x100000) /* 1-button ClickPad */
 #define SYN_CAP_CLICKPAD2BTN(ex0c)      ((ex0c) & 0x000100) /* 2-button ClickPad */
@@ -86,6 +91,7 @@
 #define SYN_CAP_ADV_GESTURE(ex0c)       ((ex0c) & 0x080000)
 #define SYN_CAP_REDUCED_FILTERING(ex0c) ((ex0c) & 0x000400)
 #define SYN_CAP_IMAGE_SENSOR(ex0c)      ((ex0c) & 0x000800)
+#define SYN_CAP_FORCEPAD(ex0c)          ((ex0c) & 0x008000)
 
 /* synaptics modes query bits */
 #define SYN_MODE_ABSOLUTE(m)            ((m) & (1 << 7))
@@ -177,6 +183,11 @@ struct synaptics_data {
          */
         struct synaptics_hw_state agm;
         bool agm_pending;                       /* new AGM packet received */
+
+        /* ForcePad handling */
+        unsigned long                           press_start;
+        bool                                    press;
+        bool                                    report_press;
 };
 
 void synaptics_module_init(void);
diff --git a/drivers/input/mouse/synaptics_usb.c b/drivers/input/mouse/synaptics_usb.c
index e122bda16aab..6bcc0189c1c9 100644
--- a/drivers/input/mouse/synaptics_usb.c
+++ b/drivers/input/mouse/synaptics_usb.c
@@ -387,6 +387,7 @@ static int synusb_probe(struct usb_interface *intf,
                 __set_bit(EV_REL, input_dev->evbit);
                 __set_bit(REL_X, input_dev->relbit);
                 __set_bit(REL_Y, input_dev->relbit);
+                __set_bit(INPUT_PROP_POINTING_STICK, input_dev->propbit);
                 input_set_abs_params(input_dev, ABS_PRESSURE, 0, 127, 0, 0);
         } else {
                 input_set_abs_params(input_dev, ABS_X,
@@ -401,6 +402,11 @@ static int synusb_probe(struct usb_interface *intf,
                 __set_bit(BTN_TOOL_TRIPLETAP, input_dev->keybit);
         }
 
+        if (synusb->flags & SYNUSB_TOUCHSCREEN)
+                __set_bit(INPUT_PROP_DIRECT, input_dev->propbit);
+        else
+                __set_bit(INPUT_PROP_POINTER, input_dev->propbit);
+
         __set_bit(BTN_LEFT, input_dev->keybit);
         __set_bit(BTN_RIGHT, input_dev->keybit);
         __set_bit(BTN_MIDDLE, input_dev->keybit);
diff --git a/drivers/input/mouse/trackpoint.c b/drivers/input/mouse/trackpoint.c
index ca843b6cf6bd..30c8b6998808 100644
--- a/drivers/input/mouse/trackpoint.c
+++ b/drivers/input/mouse/trackpoint.c
@@ -393,6 +393,9 @@ int trackpoint_detect(struct psmouse *psmouse, bool set_properties)
         if ((button_info & 0x0f) >= 3)
                 __set_bit(BTN_MIDDLE, psmouse->dev->keybit);
 
+        __set_bit(INPUT_PROP_POINTER, psmouse->dev->propbit);
+        __set_bit(INPUT_PROP_POINTING_STICK, psmouse->dev->propbit);
+
         trackpoint_defaults(psmouse->private);
 
         error = trackpoint_power_on_reset(&psmouse->ps2dev);
diff --git a/drivers/input/serio/serport.c b/drivers/input/serio/serport.c
index 0cb7ef59071b..69175b825346 100644
--- a/drivers/input/serio/serport.c
+++ b/drivers/input/serio/serport.c
@@ -21,6 +21,7 @@
 #include <linux/init.h>
 #include <linux/serio.h>
 #include <linux/tty.h>
+#include <linux/compat.h>
 
 MODULE_AUTHOR("Vojtech Pavlik <vojtech@ucw.cz>");
 MODULE_DESCRIPTION("Input device TTY line discipline");
@@ -198,28 +199,55 @@ static ssize_t serport_ldisc_read(struct tty_struct * tty, struct file * file, u
         return 0;
 }
 
+static void serport_set_type(struct tty_struct *tty, unsigned long type)
+{
+        struct serport *serport = tty->disc_data;
+
+        serport->id.proto = type & 0x000000ff;
+        serport->id.id    = (type & 0x0000ff00) >> 8;
+        serport->id.extra = (type & 0x00ff0000) >> 16;
+}
+
 /*
  * serport_ldisc_ioctl() allows to set the port protocol, and device ID
  */
 
-static int serport_ldisc_ioctl(struct tty_struct * tty, struct file * file, unsigned int cmd, unsigned long arg)
+static int serport_ldisc_ioctl(struct tty_struct *tty, struct file *file,
+                               unsigned int cmd, unsigned long arg)
 {
-        struct serport *serport = (struct serport*) tty->disc_data;
-        unsigned long type;
-
         if (cmd == SPIOCSTYPE) {
+                unsigned long type;
+
                 if (get_user(type, (unsigned long __user *) arg))
                         return -EFAULT;
 
-                serport->id.proto = type & 0x000000ff;
-                serport->id.id    = (type & 0x0000ff00) >> 8;
-                serport->id.extra = (type & 0x00ff0000) >> 16;
+                serport_set_type(tty, type);
+                return 0;
+        }
+
+        return -EINVAL;
+}
+
+#ifdef CONFIG_COMPAT
+#define COMPAT_SPIOCSTYPE       _IOW('q', 0x01, compat_ulong_t)
+static long serport_ldisc_compat_ioctl(struct tty_struct *tty,
+                                       struct file *file,
+                                       unsigned int cmd, unsigned long arg)
+{
+        if (cmd == COMPAT_SPIOCSTYPE) {
+                void __user *uarg = compat_ptr(arg);
+                compat_ulong_t compat_type;
+
+                if (get_user(compat_type, (compat_ulong_t __user *)uarg))
+                        return -EFAULT;
 
+                serport_set_type(tty, compat_type);
                 return 0;
         }
 
         return -EINVAL;
 }
+#endif
 
 static void serport_ldisc_write_wakeup(struct tty_struct * tty)
 {
@@ -243,6 +271,9 @@ static struct tty_ldisc_ops serport_ldisc = {
         .close =        serport_ldisc_close,
         .read =         serport_ldisc_read,
         .ioctl =        serport_ldisc_ioctl,
+#ifdef CONFIG_COMPAT
+        .compat_ioctl = serport_ldisc_compat_ioctl,
+#endif
         .receive_buf =  serport_ldisc_receive,
         .write_wakeup = serport_ldisc_write_wakeup
 };
diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index db178ed2b47e..aaacf8bfa61f 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -837,7 +837,12 @@ static irqreturn_t mxt_process_messages_t44(struct mxt_data *data)
         count = data->msg_buf[0];
 
         if (count == 0) {
-                dev_warn(dev, "Interrupt triggered but zero messages\n");
+                /*
+                 * This condition is caused by the CHG line being configured
+                 * in Mode 0. It results in unnecessary I2C operations but it
+                 * is benign.
+                 */
+                dev_dbg(dev, "Interrupt triggered but zero messages\n");
                 return IRQ_NONE;
         } else if (count > data->max_reportid) {
                 dev_err(dev, "T44 count %d exceeded max report id\n", count);
@@ -1374,11 +1379,16 @@ static int mxt_get_info(struct mxt_data *data)
         return 0;
 }
 
-static void mxt_free_object_table(struct mxt_data *data)
+static void mxt_free_input_device(struct mxt_data *data)
 {
-        input_unregister_device(data->input_dev);
-        data->input_dev = NULL;
+        if (data->input_dev) {
+                input_unregister_device(data->input_dev);
+                data->input_dev = NULL;
+        }
+}
 
+static void mxt_free_object_table(struct mxt_data *data)
+{
         kfree(data->object_table);
         data->object_table = NULL;
         kfree(data->msg_buf);
@@ -1957,11 +1967,13 @@ static int mxt_load_fw(struct device *dev, const char *fn)
                 ret = mxt_lookup_bootloader_address(data, 0);
                 if (ret)
                         goto release_firmware;
+
+                mxt_free_input_device(data);
+                mxt_free_object_table(data);
         } else {
                 enable_irq(data->irq);
         }
 
-        mxt_free_object_table(data);
         reinit_completion(&data->bl_completion);
 
         ret = mxt_check_bootloader(data, MXT_WAITING_BOOTLOAD_CMD, false);
@@ -2210,6 +2222,7 @@ static int mxt_probe(struct i2c_client *client, const struct i2c_device_id *id)
         return 0;
 
 err_free_object:
+        mxt_free_input_device(data);
         mxt_free_object_table(data);
 err_free_irq:
         free_irq(client->irq, data);
@@ -2224,7 +2237,7 @@ static int mxt_remove(struct i2c_client *client)
 
         sysfs_remove_group(&client->dev.kobj, &mxt_attr_group);
         free_irq(data->irq, data);
-        input_unregister_device(data->input_dev);
+        mxt_free_input_device(data);
         mxt_free_object_table(data);
         kfree(data);
 
diff --git a/drivers/input/touchscreen/wm9712.c b/drivers/input/touchscreen/wm9712.c
index 16b52115c27f..705ffa1e064a 100644
--- a/drivers/input/touchscreen/wm9712.c
+++ b/drivers/input/touchscreen/wm9712.c
@@ -41,7 +41,7 @@
  */
 static int rpu = 8;
 module_param(rpu, int, 0);
-MODULE_PARM_DESC(rpu, "Set internal pull up resitor for pen detect.");
+MODULE_PARM_DESC(rpu, "Set internal pull up resistor for pen detect.");
 
 /*
  * Set current used for pressure measurement.
diff --git a/drivers/input/touchscreen/wm9713.c b/drivers/input/touchscreen/wm9713.c
index 7405353199d7..572a5a64face 100644
--- a/drivers/input/touchscreen/wm9713.c
+++ b/drivers/input/touchscreen/wm9713.c
@@ -41,7 +41,7 @@
  */
 static int rpu = 8;
 module_param(rpu, int, 0);
-MODULE_PARM_DESC(rpu, "Set internal pull up resitor for pen detect.");
+MODULE_PARM_DESC(rpu, "Set internal pull up resistor for pen detect.");
 
 /*
  * Set current used for pressure measurement.
diff --git a/include/uapi/linux/input.h b/include/uapi/linux/input.h
index 19df18c9b8be..1874ebe9ac1e 100644
--- a/include/uapi/linux/input.h
+++ b/include/uapi/linux/input.h
@@ -165,6 +165,7 @@ struct input_keymap_entry {
 #define INPUT_PROP_BUTTONPAD            0x02    /* has button(s) under pad */
 #define INPUT_PROP_SEMI_MT              0x03    /* touch rectangle only */
 #define INPUT_PROP_TOPBUTTONPAD         0x04    /* softbuttons at top of pad */
+#define INPUT_PROP_POINTING_STICK       0x05    /* is a pointing stick */
 
 #define INPUT_PROP_MAX                  0x1f
 #define INPUT_PROP_CNT                  (INPUT_PROP_MAX + 1)