1 files changed, 15 insertions, 65 deletions

diff --git a/drivers/ide/pci/opti621.c b/drivers/ide/pci/opti621.c
index 7547fa2d83ac..c746e6f06077 100644
--- a/drivers/ide/pci/opti621.c
+++ b/drivers/ide/pci/opti621.c
@@ -115,34 +115,6 @@ static int reg_base;
 
 static DEFINE_SPINLOCK(opti621_lock);
 
-/* there are stored pio numbers from other calls of opti621_set_pio_mode */
-static void compute_pios(ide_drive_t *drive, const u8 pio)
-/* Store values into drive->drive_data
- *      second_contr - 0 for primary controller, 1 for secondary
- *      slave_drive - 0 -> pio is for master, 1 -> pio is for slave
- *      pio - PIO mode for selected drive (for other we don't know)
- */
-{
-        int d;
-        ide_hwif_t *hwif = HWIF(drive);
-
-        drive->drive_data = pio;
-
-        for (d = 0; d < 2; ++d) {
-                drive = &hwif->drives[d];
-                if (drive->present) {
-                        if (drive->drive_data == PIO_DONT_KNOW)
-                                drive->drive_data = ide_get_best_pio_mode(drive, 255, 3);
-#ifdef OPTI621_DEBUG
-                        printk("%s: Selected PIO mode %d\n",
-                                drive->name, drive->drive_data);
-#endif
-                } else {
-                        drive->drive_data = PIO_NOT_EXIST;
-                }
-        }
-}
-
 static int cmpt_clk(int time, int bus_speed)
 /* Returns (rounded up) time in clocks for time in ns,
  * with bus_speed in MHz.
@@ -226,20 +198,19 @@ static void compute_clocks(int pio, pio_clocks_t *clks, int bus_speed)
 
 static void opti621_set_pio_mode(ide_drive_t *drive, const u8 pio)
 {
-        /* primary and secondary drives share some registers,
-         * so we have to program both drives
-         */
+        ide_hwif_t *hwif = drive->hwif;
+        ide_drive_t *pair = ide_get_paired_drive(drive);
         unsigned long flags;
-        u8 pio1 = 0, pio2 = 0;
         pio_clocks_t first, second;
         int ax, drdy;
-        u8 cycle1, cycle2, misc, clk;
-        ide_hwif_t *hwif = HWIF(drive);
+        u8 cycle1, misc, clk, addr_pio = pio;
 
-        /* sets drive->drive_data for both drives */
-        compute_pios(drive, pio);
-        pio1 = hwif->drives[0].drive_data;
-        pio2 = hwif->drives[1].drive_data;
+        drive->drive_data = XFER_PIO_0 + pio;
+
+        if (pair->present) {
+                if (pair->drive_data && pair->drive_data < drive->drive_data)
+                        addr_pio = pair->drive_data - XFER_PIO_0;
+        }
 
         spin_lock_irqsave(&opti621_lock, flags);
 
@@ -259,8 +230,8 @@ static void opti621_set_pio_mode(ide_drive_t *drive, const u8 pio)
 
         printk(KERN_INFO "%s: CLK = %d MHz\n", hwif->name, clk ? 25 : 33);
 
-        compute_clocks(pio1, &first,  clk ? 25 : 33);
-        compute_clocks(pio2, &second, clk ? 25 : 33);
+        compute_clocks(pio, &first, clk ? 25 : 33);
+        compute_clocks(addr_pio, &second, clk ? 25 : 33);
 
         /* ax = max(a1,a2) */
         ax = (first.address_time < second.address_time) ? second.address_time : first.address_time;
@@ -268,37 +239,23 @@ static void opti621_set_pio_mode(ide_drive_t *drive, const u8 pio)
         drdy = 2; /* DRDY is default 2 (by OPTi Databook) */
 
         cycle1 = ((first.data_time-1)<<4)  | (first.recovery_time-2);
-        cycle2 = ((second.data_time-1)<<4) | (second.recovery_time-2);
 
         misc = ((ax - 1) << 4) | ((drdy - 2) << 1);
 
 #ifdef OPTI621_DEBUG
-        printk("%s: master: address: %d, data: %d, "
+        printk("%s: address: %d, data: %d, "
                 "recovery: %d, drdy: %d [clk]\n",
-                hwif->name, ax, first.data_time,
+                drive->name, ax, first.data_time,
                 first.recovery_time, drdy);
-        printk("%s: slave:  address: %d, data: %d, "
-                "recovery: %d, drdy: %d [clk]\n",
-                hwif->name, ax, second.data_time,
-                second.recovery_time, drdy);
 #endif
 
-        /* program primary drive */
-        /* select Index-0 for Register-A */
-        write_reg(0, MISC_REG);
+        /* select Index-0/1 for Register-A/B */
+        write_reg(drive->select.b.unit, MISC_REG);
         /* set read cycle timings */
         write_reg(cycle1, READ_REG);
         /* set write cycle timings */
         write_reg(cycle1, WRITE_REG);
 
-        /* program secondary drive */
-        /* select Index-1 for Register-B */
-        write_reg(1, MISC_REG);
-        /* set read cycle timings */
-        write_reg(cycle2, READ_REG);
-        /* set write cycle timings */
-        write_reg(cycle2, WRITE_REG);
-
         /* use Register-A for drive 0 */
         /* use Register-B for drive 1 */
         write_reg(0x85, CNTRL_REG);
@@ -310,14 +267,7 @@ static void opti621_set_pio_mode(ide_drive_t *drive, const u8 pio)
         spin_unlock_irqrestore(&opti621_lock, flags);
 }
 
-static void __devinit opti621_port_init_devs(ide_hwif_t *hwif)
-{
-        hwif->drives[0].drive_data = PIO_DONT_KNOW;
-        hwif->drives[1].drive_data = PIO_DONT_KNOW;
-}
-
 static const struct ide_port_ops opti621_port_ops = {
-        .port_init_devs         = opti621_port_init_devs,
         .set_pio_mode           = opti621_set_pio_mode,
 };