aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--drivers/net/wireless/Kconfig122
-rw-r--r--drivers/net/wireless/orinoco/Kconfig120
2 files changed, 121 insertions, 121 deletions
diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig
index 2dddbd012a99..fe819a785714 100644
--- a/drivers/net/wireless/Kconfig
+++ b/drivers/net/wireless/Kconfig
@@ -194,127 +194,6 @@ config AIRO
194 194
195 The driver can be compiled as a module and will be named "airo". 195 The driver can be compiled as a module and will be named "airo".
196 196
197config HERMES
198 tristate "Hermes chipset 802.11b support (Orinoco/Prism2/Symbol)"
199 depends on (PPC_PMAC || PCI || PCMCIA) && WLAN_80211
200 select WIRELESS_EXT
201 select FW_LOADER
202 select CRYPTO
203 select CRYPTO_MICHAEL_MIC
204 ---help---
205 A driver for 802.11b wireless cards based on the "Hermes" or
206 Intersil HFA384x (Prism 2) MAC controller. This includes the vast
207 majority of the PCMCIA 802.11b cards (which are nearly all rebadges)
208 - except for the Cisco/Aironet cards. Cards supported include the
209 Apple Airport (not a PCMCIA card), WavelanIEEE/Orinoco,
210 Cabletron/EnteraSys Roamabout, ELSA AirLancer, MELCO Buffalo, Avaya,
211 IBM High Rate Wireless, Farralon Syyline, Samsung MagicLAN, Netgear
212 MA401, LinkSys WPC-11, D-Link DWL-650, 3Com AirConnect, Intel
213 IPW2011, and Symbol Spectrum24 High Rate amongst others.
214
215 This option includes the guts of the driver, but in order to
216 actually use a card you will also need to enable support for PCMCIA
217 Hermes cards, PLX9052 based PCI adaptors or the Apple Airport below.
218
219 You will also very likely also need the Wireless Tools in order to
220 configure your card and that /etc/pcmcia/wireless.opts works :
221 <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>
222
223config HERMES_CACHE_FW_ON_INIT
224 bool "Cache Hermes firmware on driver initialisation"
225 depends on HERMES
226 default y
227 ---help---
228 Say Y to cache any firmware required by the Hermes drivers
229 on startup. The firmware will remain cached until the
230 driver is unloaded. The cache uses 64K of RAM.
231
232 Otherwise load the firmware from userspace as required. In
233 this case the driver should be unloaded and restarted
234 whenever the firmware is changed.
235
236 If you are not sure, say Y.
237
238config APPLE_AIRPORT
239 tristate "Apple Airport support (built-in)"
240 depends on PPC_PMAC && HERMES
241 help
242 Say Y here to support the Airport 802.11b wireless Ethernet hardware
243 built into the Macintosh iBook and other recent PowerPC-based
244 Macintosh machines. This is essentially a Lucent Orinoco card with
245 a non-standard interface.
246
247 This driver does not support the Airport Extreme (802.11b/g). Use
248 the BCM43xx driver for Airport Extreme cards.
249
250config PLX_HERMES
251 tristate "Hermes in PLX9052 based PCI adaptor support (Netgear MA301 etc.)"
252 depends on PCI && HERMES
253 help
254 Enable support for PCMCIA cards supported by the "Hermes" (aka
255 orinoco) driver when used in PLX9052 based PCI adaptors. These
256 adaptors are not a full PCMCIA controller but act as a more limited
257 PCI <-> PCMCIA bridge. Several vendors sell such adaptors so that
258 802.11b PCMCIA cards can be used in desktop machines. The Netgear
259 MA301 is such an adaptor.
260
261config TMD_HERMES
262 tristate "Hermes in TMD7160 based PCI adaptor support"
263 depends on PCI && HERMES
264 help
265 Enable support for PCMCIA cards supported by the "Hermes" (aka
266 orinoco) driver when used in TMD7160 based PCI adaptors. These
267 adaptors are not a full PCMCIA controller but act as a more limited
268 PCI <-> PCMCIA bridge. Several vendors sell such adaptors so that
269 802.11b PCMCIA cards can be used in desktop machines.
270
271config NORTEL_HERMES
272 tristate "Nortel emobility PCI adaptor support"
273 depends on PCI && HERMES
274 help
275 Enable support for PCMCIA cards supported by the "Hermes" (aka
276 orinoco) driver when used in Nortel emobility PCI adaptors. These
277 adaptors are not full PCMCIA controllers, but act as a more limited
278 PCI <-> PCMCIA bridge.
279
280config PCI_HERMES
281 tristate "Prism 2.5 PCI 802.11b adaptor support"
282 depends on PCI && HERMES
283 help
284 Enable support for PCI and mini-PCI 802.11b wireless NICs based on
285 the Prism 2.5 chipset. These are true PCI cards, not the 802.11b
286 PCMCIA cards bundled with PCI<->PCMCIA adaptors which are also
287 common. Some of the built-in wireless adaptors in laptops are of
288 this variety.
289
290config PCMCIA_HERMES
291 tristate "Hermes PCMCIA card support"
292 depends on PCMCIA && HERMES
293 ---help---
294 A driver for "Hermes" chipset based PCMCIA wireless adaptors, such
295 as the Lucent WavelanIEEE/Orinoco cards and their OEM (Cabletron/
296 EnteraSys RoamAbout 802.11, ELSA Airlancer, Melco Buffalo and
297 others). It should also be usable on various Prism II based cards
298 such as the Linksys, D-Link and Farallon Skyline. It should also
299 work on Symbol cards such as the 3Com AirConnect and Ericsson WLAN.
300
301 You will very likely need the Wireless Tools in order to
302 configure your card and that /etc/pcmcia/wireless.opts works:
303 <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>.
304
305config PCMCIA_SPECTRUM
306 tristate "Symbol Spectrum24 Trilogy PCMCIA card support"
307 depends on PCMCIA && HERMES
308 ---help---
309
310 This is a driver for 802.11b cards using RAM-loadable Symbol
311 firmware, such as Symbol Wireless Networker LA4100, CompactFlash
312 cards by Socket Communications and Intel PRO/Wireless 2011B.
313
314 This driver requires firmware download on startup. Utilities
315 for downloading Symbol firmware are available at
316 <http://sourceforge.net/projects/orinoco/>
317
318config ATMEL 197config ATMEL
319 tristate "Atmel at76c50x chipset 802.11b support" 198 tristate "Atmel at76c50x chipset 802.11b support"
320 depends on (PCI || PCMCIA) && WLAN_80211 199 depends on (PCI || PCMCIA) && WLAN_80211
@@ -596,5 +475,6 @@ source "drivers/net/wireless/b43/Kconfig"
596source "drivers/net/wireless/b43legacy/Kconfig" 475source "drivers/net/wireless/b43legacy/Kconfig"
597source "drivers/net/wireless/zd1211rw/Kconfig" 476source "drivers/net/wireless/zd1211rw/Kconfig"
598source "drivers/net/wireless/rt2x00/Kconfig" 477source "drivers/net/wireless/rt2x00/Kconfig"
478source "drivers/net/wireless/orinoco/Kconfig"
599 479
600endmenu 480endmenu
diff --git a/drivers/net/wireless/orinoco/Kconfig b/drivers/net/wireless/orinoco/Kconfig
new file mode 100644
index 000000000000..44411eb4e91b
--- /dev/null
+++ b/drivers/net/wireless/orinoco/Kconfig
@@ -0,0 +1,120 @@
1config HERMES
2 tristate "Hermes chipset 802.11b support (Orinoco/Prism2/Symbol)"
3 depends on (PPC_PMAC || PCI || PCMCIA) && WLAN_80211
4 select WIRELESS_EXT
5 select FW_LOADER
6 select CRYPTO
7 select CRYPTO_MICHAEL_MIC
8 ---help---
9 A driver for 802.11b wireless cards based on the "Hermes" or
10 Intersil HFA384x (Prism 2) MAC controller. This includes the vast
11 majority of the PCMCIA 802.11b cards (which are nearly all rebadges)
12 - except for the Cisco/Aironet cards. Cards supported include the
13 Apple Airport (not a PCMCIA card), WavelanIEEE/Orinoco,
14 Cabletron/EnteraSys Roamabout, ELSA AirLancer, MELCO Buffalo, Avaya,
15 IBM High Rate Wireless, Farralon Syyline, Samsung MagicLAN, Netgear
16 MA401, LinkSys WPC-11, D-Link DWL-650, 3Com AirConnect, Intel
17 IPW2011, and Symbol Spectrum24 High Rate amongst others.
18
19 This option includes the guts of the driver, but in order to
20 actually use a card you will also need to enable support for PCMCIA
21 Hermes cards, PLX9052 based PCI adaptors or the Apple Airport below.
22
23 You will also very likely also need the Wireless Tools in order to
24 configure your card and that /etc/pcmcia/wireless.opts works :
25 <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>
26
27config HERMES_CACHE_FW_ON_INIT
28 bool "Cache Hermes firmware on driver initialisation"
29 depends on HERMES
30 default y
31 ---help---
32 Say Y to cache any firmware required by the Hermes drivers
33 on startup. The firmware will remain cached until the
34 driver is unloaded. The cache uses 64K of RAM.
35
36 Otherwise load the firmware from userspace as required. In
37 this case the driver should be unloaded and restarted
38 whenever the firmware is changed.
39
40 If you are not sure, say Y.
41
42config APPLE_AIRPORT
43 tristate "Apple Airport support (built-in)"
44 depends on PPC_PMAC && HERMES
45 help
46 Say Y here to support the Airport 802.11b wireless Ethernet hardware
47 built into the Macintosh iBook and other recent PowerPC-based
48 Macintosh machines. This is essentially a Lucent Orinoco card with
49 a non-standard interface.
50
51 This driver does not support the Airport Extreme (802.11b/g). Use
52 the BCM43xx driver for Airport Extreme cards.
53
54config PLX_HERMES
55 tristate "Hermes in PLX9052 based PCI adaptor support (Netgear MA301 etc.)"
56 depends on PCI && HERMES
57 help
58 Enable support for PCMCIA cards supported by the "Hermes" (aka
59 orinoco) driver when used in PLX9052 based PCI adaptors. These
60 adaptors are not a full PCMCIA controller but act as a more limited
61 PCI <-> PCMCIA bridge. Several vendors sell such adaptors so that
62 802.11b PCMCIA cards can be used in desktop machines. The Netgear
63 MA301 is such an adaptor.
64
65config TMD_HERMES
66 tristate "Hermes in TMD7160 based PCI adaptor support"
67 depends on PCI && HERMES
68 help
69 Enable support for PCMCIA cards supported by the "Hermes" (aka
70 orinoco) driver when used in TMD7160 based PCI adaptors. These
71 adaptors are not a full PCMCIA controller but act as a more limited
72 PCI <-> PCMCIA bridge. Several vendors sell such adaptors so that
73 802.11b PCMCIA cards can be used in desktop machines.
74
75config NORTEL_HERMES
76 tristate "Nortel emobility PCI adaptor support"
77 depends on PCI && HERMES
78 help
79 Enable support for PCMCIA cards supported by the "Hermes" (aka
80 orinoco) driver when used in Nortel emobility PCI adaptors. These
81 adaptors are not full PCMCIA controllers, but act as a more limited
82 PCI <-> PCMCIA bridge.
83
84config PCI_HERMES
85 tristate "Prism 2.5 PCI 802.11b adaptor support"
86 depends on PCI && HERMES
87 help
88 Enable support for PCI and mini-PCI 802.11b wireless NICs based on
89 the Prism 2.5 chipset. These are true PCI cards, not the 802.11b
90 PCMCIA cards bundled with PCI<->PCMCIA adaptors which are also
91 common. Some of the built-in wireless adaptors in laptops are of
92 this variety.
93
94config PCMCIA_HERMES
95 tristate "Hermes PCMCIA card support"
96 depends on PCMCIA && HERMES
97 ---help---
98 A driver for "Hermes" chipset based PCMCIA wireless adaptors, such
99 as the Lucent WavelanIEEE/Orinoco cards and their OEM (Cabletron/
100 EnteraSys RoamAbout 802.11, ELSA Airlancer, Melco Buffalo and
101 others). It should also be usable on various Prism II based cards
102 such as the Linksys, D-Link and Farallon Skyline. It should also
103 work on Symbol cards such as the 3Com AirConnect and Ericsson WLAN.
104
105 You will very likely need the Wireless Tools in order to
106 configure your card and that /etc/pcmcia/wireless.opts works:
107 <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>.
108
109config PCMCIA_SPECTRUM
110 tristate "Symbol Spectrum24 Trilogy PCMCIA card support"
111 depends on PCMCIA && HERMES
112 ---help---
113
114 This is a driver for 802.11b cards using RAM-loadable Symbol
115 firmware, such as Symbol Wireless Networker LA4100, CompactFlash
116 cards by Socket Communications and Intel PRO/Wireless 2011B.
117
118 This driver requires firmware download on startup. Utilities
119 for downloading Symbol firmware are available at
120 <http://sourceforge.net/projects/orinoco/>
generated by cgit v1.2.2 (git 2.25.0) at 2024-12-23 21:04:43 -0500