7 files changed, 147 insertions, 28 deletions

diff --git a/Documentation/arm/Samsung-S3C24XX/USB-Host.txt b/Documentation/arm/Samsung-S3C24XX/USB-Host.txt
new file mode 100644
index 000000000000..b93b68e2b143
--- /dev/null
+++ b/Documentation/arm/Samsung-S3C24XX/USB-Host.txt
@@ -0,0 +1,93 @@
+                        S3C24XX USB Host support
+                        ========================
+
+
+
+Introduction
+------------
+
+  This document details the S3C2410/S3C2440 in-built OHCI USB host support.
+
+Configuration
+-------------
+
+  Enable at least the following kernel options:
+
+  menuconfig:
+
+   Device Drivers  --->
+     USB support  --->
+       <*> Support for Host-side USB
+       <*>   OHCI HCD support
+
+
+  .config:
+    CONFIG_USB
+    CONFIG_USB_OHCI_HCD
+
+
+  Once these options are configured, the standard set of USB device
+  drivers can be configured and used.
+
+
+Board Support
+-------------
+
+  The driver attaches to a platform device, which will need to be
+  added by the board specific support file in linux/arch/arm/mach-s3c2410,
+  such as mach-bast.c or mach-smdk2410.c
+
+  The platform device's platform_data field is only needed if the
+  board implements extra power control or over-current monitoring.
+
+  The OHCI driver does not ensure the state of the S3C2410's MISCCTRL
+  register, so if both ports are to be used for the host, then it is
+  the board support file's responsibility to ensure that the second
+  port is configured to be connected to the OHCI core.
+
+
+Platform Data
+-------------
+
+  See linux/include/asm-arm/arch-s3c2410/usb-control.h for the
+  descriptions of the platform device data. An implementation
+  can be found in linux/arch/arm/mach-s3c2410/usb-simtec.c .
+
+  The `struct s3c2410_hcd_info` contains a pair of functions
+  that get called to enable over-current detection, and to
+  control the port power status.
+
+  The ports are numbered 0 and 1.
+
+  power_control:
+
+    Called to enable or disable the power on the port.
+
+  enable_oc:
+
+    Called to enable or disable the over-current monitoring.
+    This should claim or release the resources being used to
+    check the power condition on the port, such as an IRQ.
+
+  report_oc:
+
+    The OHCI driver fills this field in for the over-current code
+    to call when there is a change to the over-current state on
+    an port. The ports argument is a bitmask of 1 bit per port,
+    with bit X being 1 for an over-current on port X.
+
+    The function s3c2410_usb_report_oc() has been provided to
+    ensure this is called correctly.
+
+  port[x]:
+
+    This is struct describes each port, 0 or 1. The platform driver
+    should set the flags field of each port to S3C_HCDFLG_USED if
+    the port is enabled.
+
+
+
+Document Author
+---------------
+
+Ben Dooks, (c) 2005 Simtec Electronics
diff --git a/arch/arm/mach-s3c2410/usb-simtec.c b/arch/arm/mach-s3c2410/usb-simtec.c
index 7f2b61362976..f021fd82be52 100644
--- a/arch/arm/mach-s3c2410/usb-simtec.c
+++ b/arch/arm/mach-s3c2410/usb-simtec.c
@@ -1,6 +1,6 @@
 /* linux/arch/arm/mach-s3c2410/usb-simtec.c
  *
- * Copyright (c) 2004 Simtec Electronics
+ * Copyright (c) 2004,2005 Simtec Electronics
  *   Ben Dooks <ben@simtec.co.uk>
  *
  * http://www.simtec.co.uk/products/EB2410ITX/
@@ -14,6 +14,8 @@
  * Modifications:
  *      14-Sep-2004 BJD  Created
  *      18-Oct-2004 BJD  Cleanups, and added code to report OC cleared
+ *      09-Aug-2005 BJD  Renamed s3c2410_report_oc to s3c2410_usb_report_oc
+ *      09-Aug-2005 BJD  Ports powered only if both are enabled
 */
 
 #define DEBUG
@@ -47,13 +49,19 @@
  * designed boards.
 */
 
+static unsigned int power_state[2];
+
 static void
 usb_simtec_powercontrol(int port, int to)
 {
         pr_debug("usb_simtec_powercontrol(%d,%d)\n", port, to);
 
-        if (port == 1)
-                s3c2410_gpio_setpin(S3C2410_GPB4, to ? 0:1);
+        power_state[port] = to;
+
+        if (power_state[0] && power_state[1])
+                s3c2410_gpio_setpin(S3C2410_GPB4, 0);
+        else
+                s3c2410_gpio_setpin(S3C2410_GPB4, 1);
 }
 
 static irqreturn_t
@@ -63,10 +71,10 @@ usb_simtec_ocirq(int irq, void *pw, struct pt_regs *regs)
 
         if (s3c2410_gpio_getpin(S3C2410_GPG10) == 0) {
                 pr_debug("usb_simtec: over-current irq (oc detected)\n");
-                s3c2410_report_oc(info, 3);
+                s3c2410_usb_report_oc(info, 3);
         } else {
                 pr_debug("usb_simtec: over-current irq (oc cleared)\n");
-                s3c2410_report_oc(info, 0);
+                s3c2410_usb_report_oc(info, 0);
         }
 
         return IRQ_HANDLED;
diff --git a/arch/arm/mm/mm-armv.c b/arch/arm/mm/mm-armv.c
index e33fe4229d05..3c655c54e231 100644
--- a/arch/arm/mm/mm-armv.c
+++ b/arch/arm/mm/mm-armv.c
@@ -383,6 +383,7 @@ static void __init build_mem_type_table(void)
 {
         struct cachepolicy *cp;
         unsigned int cr = get_cr();
+        unsigned int user_pgprot;
         int cpu_arch = cpu_architecture();
         int i;
 
@@ -408,6 +409,9 @@ static void __init build_mem_type_table(void)
                 }
         }
 
+        cp = &cache_policies[cachepolicy];
+        user_pgprot = cp->pte;
+
         /*
          * ARMv6 and above have extended page tables.
          */
@@ -426,11 +430,18 @@ static void __init build_mem_type_table(void)
                 mem_types[MT_MINICLEAN].prot_sect |= PMD_SECT_APX|PMD_SECT_AP_WRITE;
                 mem_types[MT_CACHECLEAN].prot_sect |= PMD_SECT_APX|PMD_SECT_AP_WRITE;
 
+                /*
+                 * Mark the device area as "shared device"
+                 */
                 mem_types[MT_DEVICE].prot_pte |= L_PTE_BUFFERABLE;
                 mem_types[MT_DEVICE].prot_sect |= PMD_SECT_BUFFERED;
-        }
 
-        cp = &cache_policies[cachepolicy];
+                /*
+                 * User pages need to be mapped with the ASID
+                 * (iow, non-global)
+                 */
+                user_pgprot |= L_PTE_ASID;
+        }
 
         if (cpu_arch >= CPU_ARCH_ARMv5) {
                 mem_types[MT_LOW_VECTORS].prot_pte |= cp->pte & PTE_CACHEABLE;
@@ -448,7 +459,7 @@ static void __init build_mem_type_table(void)
 
         for (i = 0; i < 16; i++) {
                 unsigned long v = pgprot_val(protection_map[i]);
-                v &= (~(PTE_BUFFERABLE|PTE_CACHEABLE)) | cp->pte;
+                v &= (~(PTE_BUFFERABLE|PTE_CACHEABLE)) | user_pgprot;
                 protection_map[i] = __pgprot(v);
         }
 
diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S
index 352db98ee269..3429ddcf65d1 100644
--- a/arch/arm/mm/proc-v6.S
+++ b/arch/arm/mm/proc-v6.S
@@ -111,12 +111,6 @@ ENTRY(cpu_v6_switch_mm)
         mcr     p15, 0, r1, c13, c0, 1          @ set context ID
         mov     pc, lr
 
-#define nG      (1 << 11)
-#define APX     (1 << 9)
-#define AP1     (1 << 5)
-#define AP0     (1 << 4)
-#define XN      (1 << 0)
-
 /*
  *      cpu_v6_set_pte(ptep, pte)
  *
@@ -139,24 +133,24 @@ ENTRY(cpu_v6_switch_mm)
 ENTRY(cpu_v6_set_pte)
         str     r1, [r0], #-2048                @ linux version
 
-        bic     r2, r1, #0x00000ff0
+        bic     r2, r1, #0x000007f0
         bic     r2, r2, #0x00000003
-        orr     r2, r2, #AP0 | 2
+        orr     r2, r2, #PTE_EXT_AP0 | 2
 
         tst     r1, #L_PTE_WRITE
         tstne   r1, #L_PTE_DIRTY
-        orreq   r2, r2, #APX
+        orreq   r2, r2, #PTE_EXT_APX
 
         tst     r1, #L_PTE_USER
-        orrne   r2, r2, #AP1 | nG
-        tstne   r2, #APX
-        bicne   r2, r2, #APX | AP0
+        orrne   r2, r2, #PTE_EXT_AP1
+        tstne   r2, #PTE_EXT_APX
+        bicne   r2, r2, #PTE_EXT_APX | PTE_EXT_AP0
 
         tst     r1, #L_PTE_YOUNG
-        biceq   r2, r2, #APX | AP1 | AP0
+        biceq   r2, r2, #PTE_EXT_APX | PTE_EXT_AP_MASK
 
 @       tst     r1, #L_PTE_EXEC
-@       orreq   r2, r2, #XN
+@       orreq   r2, r2, #PTE_EXT_XN
 
         tst     r1, #L_PTE_PRESENT
         moveq   r2, #0
diff --git a/drivers/video/pxafb.c b/drivers/video/pxafb.c
index 16e37a535d85..30112816420c 100644
--- a/drivers/video/pxafb.c
+++ b/drivers/video/pxafb.c
@@ -717,6 +717,9 @@ static void pxafb_enable_controller(struct pxafb_info *fbi)
         DPRINTK("reg_lccr2 0x%08x\n", (unsigned int) fbi->reg_lccr2);
         DPRINTK("reg_lccr3 0x%08x\n", (unsigned int) fbi->reg_lccr3);
 
+        /* enable LCD controller clock */
+        pxa_set_cken(CKEN16_LCD, 1);
+
         /* Sequence from 11.7.10 */
         LCCR3 = fbi->reg_lccr3;
         LCCR2 = fbi->reg_lccr2;
@@ -750,6 +753,9 @@ static void pxafb_disable_controller(struct pxafb_info *fbi)
 
         schedule_timeout(20 * HZ / 1000);
         remove_wait_queue(&fbi->ctrlr_wait, &wait);
+
+        /* disable LCD controller clock */
+        pxa_set_cken(CKEN16_LCD, 0);
 }
 
 /*
@@ -1299,8 +1305,6 @@ int __init pxafb_probe(struct device *dev)
                 ret = -ENOMEM;
                 goto failed;
         }
-        /* enable LCD controller clock */
-        pxa_set_cken(CKEN16_LCD, 1);
 
         ret = request_irq(IRQ_LCD, pxafb_handle_irq, SA_INTERRUPT, "LCD", fbi);
         if (ret) {
diff --git a/include/asm-arm/arch-s3c2410/usb-control.h b/include/asm-arm/arch-s3c2410/usb-control.h
index 1cc85a096b23..bd43b566db3e 100644
--- a/include/asm-arm/arch-s3c2410/usb-control.h
+++ b/include/asm-arm/arch-s3c2410/usb-control.h
@@ -12,6 +12,7 @@
  * Changelog:
  *  11-Sep-2004 BJD  Created file
  *  21-Sep-2004 BJD  Updated port info
+ *  09-Aug-2005 BJD  Renamed s3c2410_report_oc s3c2410_usb_report_oc
 */
 
 #ifndef __ASM_ARCH_USBCONTROL_H
@@ -35,7 +36,7 @@ struct s3c2410_hcd_info {
         void            (*report_oc)(struct s3c2410_hcd_info *, int ports);
 };
 
-static void inline s3c2410_report_oc(struct s3c2410_hcd_info *info, int ports)
+static void inline s3c2410_usb_report_oc(struct s3c2410_hcd_info *info, int ports)
 {
         if (info->report_oc != NULL) {
                 (info->report_oc)(info, ports);
diff --git a/include/asm-arm/pgtable.h b/include/asm-arm/pgtable.h
index a9892eb42a23..478c49b56e18 100644
--- a/include/asm-arm/pgtable.h
+++ b/include/asm-arm/pgtable.h
@@ -188,12 +188,18 @@ extern void __pgd_error(const char *file, int line, unsigned long val);
 /*
  *   - extended small page/tiny page
  */
+#define PTE_EXT_XN              (1 << 0)        /* v6 */
 #define PTE_EXT_AP_MASK         (3 << 4)
+#define PTE_EXT_AP0             (1 << 4)
+#define PTE_EXT_AP1             (2 << 4)
 #define PTE_EXT_AP_UNO_SRO      (0 << 4)
-#define PTE_EXT_AP_UNO_SRW      (1 << 4)
-#define PTE_EXT_AP_URO_SRW      (2 << 4)
-#define PTE_EXT_AP_URW_SRW      (3 << 4)
+#define PTE_EXT_AP_UNO_SRW      (PTE_EXT_AP0)
+#define PTE_EXT_AP_URO_SRW      (PTE_EXT_AP1)
+#define PTE_EXT_AP_URW_SRW      (PTE_EXT_AP1|PTE_EXT_AP0)
 #define PTE_EXT_TEX(x)          ((x) << 6)      /* v5 */
+#define PTE_EXT_APX             (1 << 9)        /* v6 */
+#define PTE_EXT_SHARED          (1 << 10)       /* v6 */
+#define PTE_EXT_NG              (1 << 11)       /* v6 */
 
 /*
  *   - small page
@@ -224,6 +230,8 @@ extern void __pgd_error(const char *file, int line, unsigned long val);
 #define L_PTE_WRITE             (1 << 5)
 #define L_PTE_EXEC              (1 << 6)
 #define L_PTE_DIRTY             (1 << 7)
+#define L_PTE_SHARED            (1 << 10)       /* shared between CPUs (v6) */
+#define L_PTE_ASID              (1 << 11)       /* non-global (use ASID, v6) */
 
 #ifndef __ASSEMBLY__