3 files changed, 44 insertions, 24 deletions

diff --git a/arch/avr32/boards/atstk1000/atstk1002.c b/arch/avr32/boards/atstk1000/atstk1002.c
index d47e39f0e971..5974768a59e5 100644
--- a/arch/avr32/boards/atstk1000/atstk1002.c
+++ b/arch/avr32/boards/atstk1000/atstk1002.c
@@ -8,7 +8,6 @@
  * published by the Free Software Foundation.
  */
 #include <linux/clk.h>
-#include <linux/device.h>
 #include <linux/etherdevice.h>
 #include <linux/init.h>
 #include <linux/kernel.h>
@@ -36,12 +35,11 @@ static struct eth_addr __initdata hw_addr[2];
 static struct eth_platform_data __initdata eth_data[2];
 extern struct lcdc_platform_data atstk1000_fb0_data;
 
-static struct spi_board_info spi_board_info[] __initdata = {
+static struct spi_board_info spi0_board_info[] __initdata = {
         {
+                /* QVGA display */
                 .modalias       = "ltv350qv",
-                .controller_data = (void *)GPIO_PIN_PA(4),
                 .max_speed_hz   = 16000000,
-                .bus_num        = 0,
                 .chip_select    = 1,
         },
 };
@@ -149,8 +147,7 @@ static int __init atstk1002_init(void)
 
         set_hw_addr(at32_add_device_eth(0, &eth_data[0]));
 
-        spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
-        at32_add_device_spi(0);
+        at32_add_device_spi(0, spi0_board_info, ARRAY_SIZE(spi0_board_info));
         at32_add_device_lcdc(0, &atstk1000_fb0_data);
 
         return 0;
diff --git a/arch/avr32/mach-at32ap/at32ap7000.c b/arch/avr32/mach-at32ap/at32ap7000.c
index a5037aa102fb..bc235507c5c7 100644
--- a/arch/avr32/mach-at32ap/at32ap7000.c
+++ b/arch/avr32/mach-at32ap/at32ap7000.c
@@ -8,6 +8,7 @@
 #include <linux/clk.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
+#include <linux/spi/spi.h>
 
 #include <asm/io.h>
 
@@ -751,8 +752,41 @@ static struct resource atmel_spi1_resource[] = {
 DEFINE_DEV(atmel_spi, 1);
 DEV_CLK(spi_clk, atmel_spi1, pba, 1);
 
-struct platform_device *__init at32_add_device_spi(unsigned int id)
+static void
+at32_spi_setup_slaves(unsigned int bus_num, struct spi_board_info *b,
+                      unsigned int n, const u8 *pins)
 {
+        unsigned int pin, mode;
+
+        for (; n; n--, b++) {
+                b->bus_num = bus_num;
+                if (b->chip_select >= 4)
+                        continue;
+                pin = (unsigned)b->controller_data;
+                if (!pin) {
+                        pin = pins[b->chip_select];
+                        b->controller_data = (void *)pin;
+                }
+                mode = AT32_GPIOF_OUTPUT;
+                if (!(b->mode & SPI_CS_HIGH))
+                        mode |= AT32_GPIOF_HIGH;
+                at32_select_gpio(pin, mode);
+        }
+}
+
+struct platform_device *__init
+at32_add_device_spi(unsigned int id, struct spi_board_info *b, unsigned int n)
+{
+        /*
+         * Manage the chipselects as GPIOs, normally using the same pins
+         * the SPI controller expects; but boards can use other pins.
+         */
+        static u8 __initdata spi0_pins[] =
+                { GPIO_PIN_PA(3), GPIO_PIN_PA(4),
+                  GPIO_PIN_PA(5), GPIO_PIN_PA(20), };
+        static u8 __initdata spi1_pins[] =
+                { GPIO_PIN_PB(2), GPIO_PIN_PB(3),
+                  GPIO_PIN_PB(4), GPIO_PIN_PA(27), };
         struct platform_device *pdev;
 
         switch (id) {
@@ -761,14 +795,7 @@ struct platform_device *__init at32_add_device_spi(unsigned int id)
                 select_peripheral(PA(0),  PERIPH_A, 0); /* MISO  */
                 select_peripheral(PA(1),  PERIPH_A, 0); /* MOSI  */
                 select_peripheral(PA(2),  PERIPH_A, 0); /* SCK   */
-
-                /* NPCS[2:0] */
-                at32_select_gpio(GPIO_PIN_PA(3),
-                                 AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH);
-                at32_select_gpio(GPIO_PIN_PA(4),
-                                 AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH);
-                at32_select_gpio(GPIO_PIN_PA(5),
-                                 AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH);
+                at32_spi_setup_slaves(0, b, n, spi0_pins);
                 break;
 
         case 1:
@@ -776,20 +803,14 @@ struct platform_device *__init at32_add_device_spi(unsigned int id)
                 select_peripheral(PB(0),  PERIPH_B, 0); /* MISO  */
                 select_peripheral(PB(1),  PERIPH_B, 0); /* MOSI  */
                 select_peripheral(PB(5),  PERIPH_B, 0); /* SCK   */
-
-                /* NPCS[2:0] */
-                at32_select_gpio(GPIO_PIN_PB(2),
-                                 AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH);
-                at32_select_gpio(GPIO_PIN_PB(3),
-                                 AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH);
-                at32_select_gpio(GPIO_PIN_PB(4),
-                                 AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH);
+                at32_spi_setup_slaves(1, b, n, spi1_pins);
                 break;
 
         default:
                 return NULL;
         }
 
+        spi_register_board_info(b, n);
         platform_device_register(pdev);
         return pdev;
 }
diff --git a/include/asm-avr32/arch-at32ap/board.h b/include/asm-avr32/arch-at32ap/board.h
index b120ee030c86..1a7b07d436ff 100644
--- a/include/asm-avr32/arch-at32ap/board.h
+++ b/include/asm-avr32/arch-at32ap/board.h
@@ -26,7 +26,9 @@ struct eth_platform_data {
 struct platform_device *
 at32_add_device_eth(unsigned int id, struct eth_platform_data *data);
 
-struct platform_device *at32_add_device_spi(unsigned int id);
+struct spi_board_info;
+struct platform_device *
+at32_add_device_spi(unsigned int id, struct spi_board_info *b, unsigned int n);
 
 struct lcdc_platform_data {
         unsigned long fbmem_start;