diff options
-rw-r--r-- | arch/blackfin/configs/DNP5370_defconfig | 121 | ||||
-rw-r--r-- | arch/blackfin/mach-bf537/boards/Kconfig | 6 | ||||
-rw-r--r-- | arch/blackfin/mach-bf537/boards/Makefile | 1 | ||||
-rw-r--r-- | arch/blackfin/mach-bf537/boards/dnp5370.c | 418 |
4 files changed, 546 insertions, 0 deletions
diff --git a/arch/blackfin/configs/DNP5370_defconfig b/arch/blackfin/configs/DNP5370_defconfig new file mode 100644 index 000000000000..0ebc7d9aa426 --- /dev/null +++ b/arch/blackfin/configs/DNP5370_defconfig | |||
@@ -0,0 +1,121 @@ | |||
1 | CONFIG_EXPERIMENTAL=y | ||
2 | CONFIG_LOCALVERSION="DNP5370" | ||
3 | CONFIG_SYSVIPC=y | ||
4 | CONFIG_IKCONFIG=y | ||
5 | CONFIG_IKCONFIG_PROC=y | ||
6 | CONFIG_LOG_BUF_SHIFT=14 | ||
7 | CONFIG_BLK_DEV_INITRD=y | ||
8 | CONFIG_EMBEDDED=y | ||
9 | CONFIG_SLOB=y | ||
10 | # CONFIG_BLK_DEV_BSG is not set | ||
11 | # CONFIG_IOSCHED_CFQ is not set | ||
12 | CONFIG_BF537=y | ||
13 | CONFIG_BF_REV_0_3=y | ||
14 | CONFIG_DNP5370=y | ||
15 | CONFIG_IRQ_ERROR=7 | ||
16 | # CONFIG_CYCLES_CLOCKSOURCE is not set | ||
17 | CONFIG_C_CDPRIO=y | ||
18 | CONFIG_C_AMBEN_B0_B1_B2=y | ||
19 | CONFIG_PM=y | ||
20 | # CONFIG_SUSPEND is not set | ||
21 | CONFIG_NET=y | ||
22 | CONFIG_PACKET=y | ||
23 | CONFIG_UNIX=y | ||
24 | CONFIG_INET=y | ||
25 | CONFIG_IP_PNP=y | ||
26 | CONFIG_IP_PNP_RARP=y | ||
27 | CONFIG_SYN_COOKIES=y | ||
28 | # CONFIG_INET_XFRM_MODE_TRANSPORT is not set | ||
29 | # CONFIG_INET_XFRM_MODE_TUNNEL is not set | ||
30 | # CONFIG_INET_XFRM_MODE_BEET is not set | ||
31 | # CONFIG_INET_LRO is not set | ||
32 | # CONFIG_INET_DIAG is not set | ||
33 | # CONFIG_IPV6 is not set | ||
34 | CONFIG_LLC2=y | ||
35 | CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" | ||
36 | CONFIG_MTD=y | ||
37 | CONFIG_MTD_DEBUG=y | ||
38 | CONFIG_MTD_DEBUG_VERBOSE=1 | ||
39 | CONFIG_MTD_PARTITIONS=y | ||
40 | CONFIG_MTD_CHAR=y | ||
41 | CONFIG_MTD_BLOCK=y | ||
42 | CONFIG_NFTL=y | ||
43 | CONFIG_NFTL_RW=y | ||
44 | CONFIG_MTD_CFI=y | ||
45 | CONFIG_MTD_CFI_AMDSTD=y | ||
46 | CONFIG_MTD_ROM=y | ||
47 | CONFIG_MTD_ABSENT=y | ||
48 | CONFIG_MTD_COMPLEX_MAPPINGS=y | ||
49 | CONFIG_MTD_PHYSMAP=y | ||
50 | CONFIG_MTD_UCLINUX=y | ||
51 | CONFIG_MTD_PLATRAM=y | ||
52 | CONFIG_MTD_DATAFLASH=y | ||
53 | CONFIG_MTD_BLOCK2MTD=y | ||
54 | CONFIG_MTD_NAND=y | ||
55 | CONFIG_MTD_NAND_PLATFORM=y | ||
56 | CONFIG_BLK_DEV_LOOP=y | ||
57 | CONFIG_BLK_DEV_RAM=y | ||
58 | # CONFIG_MISC_DEVICES is not set | ||
59 | CONFIG_NETDEVICES=y | ||
60 | CONFIG_DAVICOM_PHY=y | ||
61 | CONFIG_NET_ETHERNET=y | ||
62 | CONFIG_BFIN_MAC=y | ||
63 | # CONFIG_NETDEV_1000 is not set | ||
64 | # CONFIG_NETDEV_10000 is not set | ||
65 | # CONFIG_WLAN is not set | ||
66 | # CONFIG_INPUT is not set | ||
67 | # CONFIG_SERIO is not set | ||
68 | # CONFIG_BFIN_DMA_INTERFACE is not set | ||
69 | # CONFIG_VT is not set | ||
70 | # CONFIG_DEVKMEM is not set | ||
71 | CONFIG_BFIN_JTAG_COMM=y | ||
72 | CONFIG_BFIN_JTAG_COMM_CONSOLE=y | ||
73 | CONFIG_SERIAL_BFIN=y | ||
74 | CONFIG_SERIAL_BFIN_CONSOLE=y | ||
75 | CONFIG_SERIAL_BFIN_UART0=y | ||
76 | CONFIG_LEGACY_PTY_COUNT=64 | ||
77 | # CONFIG_HW_RANDOM is not set | ||
78 | CONFIG_I2C=y | ||
79 | CONFIG_I2C_CHARDEV=y | ||
80 | CONFIG_I2C_BLACKFIN_TWI=y | ||
81 | CONFIG_SPI=y | ||
82 | CONFIG_SPI_BFIN=y | ||
83 | CONFIG_SPI_SPIDEV=y | ||
84 | CONFIG_GPIOLIB=y | ||
85 | CONFIG_GPIO_SYSFS=y | ||
86 | CONFIG_SENSORS_LM75=y | ||
87 | # CONFIG_USB_SUPPORT is not set | ||
88 | CONFIG_MMC=y | ||
89 | CONFIG_MMC_SPI=y | ||
90 | CONFIG_DMADEVICES=y | ||
91 | CONFIG_EXT2_FS=y | ||
92 | CONFIG_EXT2_FS_XATTR=y | ||
93 | # CONFIG_DNOTIFY is not set | ||
94 | CONFIG_MSDOS_FS=y | ||
95 | CONFIG_VFAT_FS=y | ||
96 | CONFIG_FAT_DEFAULT_CODEPAGE=850 | ||
97 | CONFIG_JFFS2_FS=y | ||
98 | CONFIG_CRAMFS=y | ||
99 | CONFIG_ROMFS_FS=y | ||
100 | CONFIG_ROMFS_BACKED_BY_BOTH=y | ||
101 | # CONFIG_NETWORK_FILESYSTEMS is not set | ||
102 | CONFIG_NLS_CODEPAGE_437=y | ||
103 | CONFIG_NLS_CODEPAGE_850=y | ||
104 | CONFIG_NLS_ISO8859_1=y | ||
105 | CONFIG_DEBUG_KERNEL=y | ||
106 | CONFIG_DEBUG_SHIRQ=y | ||
107 | CONFIG_DETECT_HUNG_TASK=y | ||
108 | CONFIG_DEBUG_OBJECTS=y | ||
109 | CONFIG_DEBUG_LOCK_ALLOC=y | ||
110 | CONFIG_DEBUG_KOBJECT=y | ||
111 | CONFIG_DEBUG_INFO=y | ||
112 | CONFIG_DEBUG_VM=y | ||
113 | CONFIG_DEBUG_MEMORY_INIT=y | ||
114 | CONFIG_DEBUG_LIST=y | ||
115 | # CONFIG_RCU_CPU_STALL_DETECTOR is not set | ||
116 | CONFIG_SYSCTL_SYSCALL_CHECK=y | ||
117 | CONFIG_PAGE_POISONING=y | ||
118 | # CONFIG_FTRACE is not set | ||
119 | CONFIG_DEBUG_DOUBLEFAULT=y | ||
120 | CONFIG_CPLB_INFO=y | ||
121 | CONFIG_CRC_CCITT=y | ||
diff --git a/arch/blackfin/mach-bf537/boards/Kconfig b/arch/blackfin/mach-bf537/boards/Kconfig index 44132fda63be..a44bf3a1816e 100644 --- a/arch/blackfin/mach-bf537/boards/Kconfig +++ b/arch/blackfin/mach-bf537/boards/Kconfig | |||
@@ -39,4 +39,10 @@ config CAMSIG_MINOTAUR | |||
39 | help | 39 | help |
40 | Board supply package for CSP Minotaur | 40 | Board supply package for CSP Minotaur |
41 | 41 | ||
42 | config DNP5370 | ||
43 | bool "SSV Dil/NetPC DNP/5370" | ||
44 | depends on (BF537) | ||
45 | help | ||
46 | Board supply package for DNP/5370 DIL64 module | ||
47 | |||
42 | endchoice | 48 | endchoice |
diff --git a/arch/blackfin/mach-bf537/boards/Makefile b/arch/blackfin/mach-bf537/boards/Makefile index 7e6aa4e5b205..fe42258fe1f4 100644 --- a/arch/blackfin/mach-bf537/boards/Makefile +++ b/arch/blackfin/mach-bf537/boards/Makefile | |||
@@ -8,3 +8,4 @@ obj-$(CONFIG_BFIN537_BLUETECHNIX_CM_U) += cm_bf537u.o | |||
8 | obj-$(CONFIG_BFIN537_BLUETECHNIX_TCM) += tcm_bf537.o | 8 | obj-$(CONFIG_BFIN537_BLUETECHNIX_TCM) += tcm_bf537.o |
9 | obj-$(CONFIG_PNAV10) += pnav10.o | 9 | obj-$(CONFIG_PNAV10) += pnav10.o |
10 | obj-$(CONFIG_CAMSIG_MINOTAUR) += minotaur.o | 10 | obj-$(CONFIG_CAMSIG_MINOTAUR) += minotaur.o |
11 | obj-$(CONFIG_DNP5370) += dnp5370.o | ||
diff --git a/arch/blackfin/mach-bf537/boards/dnp5370.c b/arch/blackfin/mach-bf537/boards/dnp5370.c new file mode 100644 index 000000000000..e1e9ea02ad89 --- /dev/null +++ b/arch/blackfin/mach-bf537/boards/dnp5370.c | |||
@@ -0,0 +1,418 @@ | |||
1 | /* | ||
2 | * This is the configuration for SSV Dil/NetPC DNP/5370 board. | ||
3 | * | ||
4 | * DIL module: http://www.dilnetpc.com/dnp0086.htm | ||
5 | * SK28 (starter kit): http://www.dilnetpc.com/dnp0088.htm | ||
6 | * | ||
7 | * Copyright 2010 3ality Digital Systems | ||
8 | * Copyright 2005 National ICT Australia (NICTA) | ||
9 | * Copyright 2004-2006 Analog Devices Inc. | ||
10 | * | ||
11 | * Licensed under the GPL-2 or later. | ||
12 | */ | ||
13 | |||
14 | #include <linux/device.h> | ||
15 | #include <linux/kernel.h> | ||
16 | #include <linux/platform_device.h> | ||
17 | #include <linux/io.h> | ||
18 | #include <linux/mtd/mtd.h> | ||
19 | #include <linux/mtd/nand.h> | ||
20 | #include <linux/mtd/partitions.h> | ||
21 | #include <linux/mtd/plat-ram.h> | ||
22 | #include <linux/mtd/physmap.h> | ||
23 | #include <linux/spi/spi.h> | ||
24 | #include <linux/spi/flash.h> | ||
25 | #include <linux/irq.h> | ||
26 | #include <linux/interrupt.h> | ||
27 | #include <linux/i2c.h> | ||
28 | #include <linux/spi/mmc_spi.h> | ||
29 | #include <linux/phy.h> | ||
30 | #include <asm/dma.h> | ||
31 | #include <asm/bfin5xx_spi.h> | ||
32 | #include <asm/reboot.h> | ||
33 | #include <asm/portmux.h> | ||
34 | #include <asm/dpmc.h> | ||
35 | |||
36 | /* | ||
37 | * Name the Board for the /proc/cpuinfo | ||
38 | */ | ||
39 | const char bfin_board_name[] = "DNP/5370"; | ||
40 | #define FLASH_MAC 0x202f0000 | ||
41 | #define CONFIG_MTD_PHYSMAP_LEN 0x300000 | ||
42 | |||
43 | #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) | ||
44 | static struct platform_device rtc_device = { | ||
45 | .name = "rtc-bfin", | ||
46 | .id = -1, | ||
47 | }; | ||
48 | #endif | ||
49 | |||
50 | #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) | ||
51 | #include <linux/bfin_mac.h> | ||
52 | static const unsigned short bfin_mac_peripherals[] = P_RMII0; | ||
53 | |||
54 | static struct bfin_phydev_platform_data bfin_phydev_data[] = { | ||
55 | { | ||
56 | .addr = 1, | ||
57 | .irq = PHY_POLL, /* IRQ_MAC_PHYINT */ | ||
58 | }, | ||
59 | }; | ||
60 | |||
61 | static struct bfin_mii_bus_platform_data bfin_mii_bus_data = { | ||
62 | .phydev_number = 1, | ||
63 | .phydev_data = bfin_phydev_data, | ||
64 | .phy_mode = PHY_INTERFACE_MODE_RMII, | ||
65 | .mac_peripherals = bfin_mac_peripherals, | ||
66 | }; | ||
67 | |||
68 | static struct platform_device bfin_mii_bus = { | ||
69 | .name = "bfin_mii_bus", | ||
70 | .dev = { | ||
71 | .platform_data = &bfin_mii_bus_data, | ||
72 | } | ||
73 | }; | ||
74 | |||
75 | static struct platform_device bfin_mac_device = { | ||
76 | .name = "bfin_mac", | ||
77 | .dev = { | ||
78 | .platform_data = &bfin_mii_bus, | ||
79 | } | ||
80 | }; | ||
81 | #endif | ||
82 | |||
83 | #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) | ||
84 | static struct mtd_partition asmb_flash_partitions[] = { | ||
85 | { | ||
86 | .name = "bootloader(nor)", | ||
87 | .size = 0x30000, | ||
88 | .offset = 0, | ||
89 | }, { | ||
90 | .name = "linux kernel and rootfs(nor)", | ||
91 | .size = 0x300000 - 0x30000 - 0x10000, | ||
92 | .offset = MTDPART_OFS_APPEND, | ||
93 | }, { | ||
94 | .name = "MAC address(nor)", | ||
95 | .size = 0x10000, | ||
96 | .offset = MTDPART_OFS_APPEND, | ||
97 | .mask_flags = MTD_WRITEABLE, | ||
98 | } | ||
99 | }; | ||
100 | |||
101 | static struct physmap_flash_data asmb_flash_data = { | ||
102 | .width = 1, | ||
103 | .parts = asmb_flash_partitions, | ||
104 | .nr_parts = ARRAY_SIZE(asmb_flash_partitions), | ||
105 | }; | ||
106 | |||
107 | static struct resource asmb_flash_resource = { | ||
108 | .start = 0x20000000, | ||
109 | .end = 0x202fffff, | ||
110 | .flags = IORESOURCE_MEM, | ||
111 | }; | ||
112 | |||
113 | /* 4 MB NOR flash attached to async memory banks 0-2, | ||
114 | * therefore only 3 MB visible. | ||
115 | */ | ||
116 | static struct platform_device asmb_flash_device = { | ||
117 | .name = "physmap-flash", | ||
118 | .id = 0, | ||
119 | .dev = { | ||
120 | .platform_data = &asmb_flash_data, | ||
121 | }, | ||
122 | .num_resources = 1, | ||
123 | .resource = &asmb_flash_resource, | ||
124 | }; | ||
125 | #endif | ||
126 | |||
127 | #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) | ||
128 | |||
129 | #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) | ||
130 | |||
131 | #define MMC_SPI_CARD_DETECT_INT IRQ_PF5 | ||
132 | |||
133 | static int bfin_mmc_spi_init(struct device *dev, | ||
134 | irqreturn_t (*detect_int)(int, void *), void *data) | ||
135 | { | ||
136 | return request_irq(MMC_SPI_CARD_DETECT_INT, detect_int, | ||
137 | IRQF_TRIGGER_FALLING, "mmc-spi-detect", data); | ||
138 | } | ||
139 | |||
140 | static void bfin_mmc_spi_exit(struct device *dev, void *data) | ||
141 | { | ||
142 | free_irq(MMC_SPI_CARD_DETECT_INT, data); | ||
143 | } | ||
144 | |||
145 | static struct bfin5xx_spi_chip mmc_spi_chip_info = { | ||
146 | .enable_dma = 0, /* use no dma transfer with this chip*/ | ||
147 | .bits_per_word = 8, | ||
148 | }; | ||
149 | |||
150 | static struct mmc_spi_platform_data bfin_mmc_spi_pdata = { | ||
151 | .init = bfin_mmc_spi_init, | ||
152 | .exit = bfin_mmc_spi_exit, | ||
153 | .detect_delay = 100, /* msecs */ | ||
154 | }; | ||
155 | #endif | ||
156 | |||
157 | #if defined(CONFIG_MTD_DATAFLASH) || defined(CONFIG_MTD_DATAFLASH_MODULE) | ||
158 | /* This mapping is for at45db642 it has 1056 page size, | ||
159 | * partition size and offset should be page aligned | ||
160 | */ | ||
161 | static struct mtd_partition bfin_spi_dataflash_partitions[] = { | ||
162 | { | ||
163 | .name = "JFFS2 dataflash(nor)", | ||
164 | #ifdef CONFIG_MTD_PAGESIZE_1024 | ||
165 | .offset = 0x40000, | ||
166 | .size = 0x7C0000, | ||
167 | #else | ||
168 | .offset = 0x0, | ||
169 | .size = 0x840000, | ||
170 | #endif | ||
171 | } | ||
172 | }; | ||
173 | |||
174 | static struct flash_platform_data bfin_spi_dataflash_data = { | ||
175 | .name = "mtd_dataflash", | ||
176 | .parts = bfin_spi_dataflash_partitions, | ||
177 | .nr_parts = ARRAY_SIZE(bfin_spi_dataflash_partitions), | ||
178 | .type = "mtd_dataflash", | ||
179 | }; | ||
180 | |||
181 | static struct bfin5xx_spi_chip spi_dataflash_chip_info = { | ||
182 | .enable_dma = 0, /* use no dma transfer with this chip*/ | ||
183 | .bits_per_word = 8, | ||
184 | }; | ||
185 | #endif | ||
186 | |||
187 | static struct spi_board_info bfin_spi_board_info[] __initdata = { | ||
188 | /* SD/MMC card reader at SPI bus */ | ||
189 | #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) | ||
190 | { | ||
191 | .modalias = "mmc_spi", | ||
192 | .max_speed_hz = 20000000, | ||
193 | .bus_num = 0, | ||
194 | .chip_select = 1, | ||
195 | .platform_data = &bfin_mmc_spi_pdata, | ||
196 | .controller_data = &mmc_spi_chip_info, | ||
197 | .mode = SPI_MODE_3, | ||
198 | }, | ||
199 | #endif | ||
200 | |||
201 | /* 8 Megabyte Atmel NOR flash chip at SPI bus */ | ||
202 | #if defined(CONFIG_MTD_DATAFLASH) || defined(CONFIG_MTD_DATAFLASH_MODULE) | ||
203 | { | ||
204 | .modalias = "mtd_dataflash", | ||
205 | .max_speed_hz = 16700000, | ||
206 | .bus_num = 0, | ||
207 | .chip_select = 2, | ||
208 | .platform_data = &bfin_spi_dataflash_data, | ||
209 | .controller_data = &spi_dataflash_chip_info, | ||
210 | .mode = SPI_MODE_3, /* SPI_CPHA and SPI_CPOL */ | ||
211 | }, | ||
212 | #endif | ||
213 | }; | ||
214 | |||
215 | /* SPI controller data */ | ||
216 | /* SPI (0) */ | ||
217 | static struct resource bfin_spi0_resource[] = { | ||
218 | [0] = { | ||
219 | .start = SPI0_REGBASE, | ||
220 | .end = SPI0_REGBASE + 0xFF, | ||
221 | .flags = IORESOURCE_MEM, | ||
222 | }, | ||
223 | [1] = { | ||
224 | .start = CH_SPI, | ||
225 | .end = CH_SPI, | ||
226 | .flags = IORESOURCE_DMA, | ||
227 | }, | ||
228 | [2] = { | ||
229 | .start = IRQ_SPI, | ||
230 | .end = IRQ_SPI, | ||
231 | .flags = IORESOURCE_IRQ, | ||
232 | }, | ||
233 | }; | ||
234 | |||
235 | static struct bfin5xx_spi_master spi_bfin_master_info = { | ||
236 | .num_chipselect = 8, | ||
237 | .enable_dma = 1, /* master has the ability to do dma transfer */ | ||
238 | .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0}, | ||
239 | }; | ||
240 | |||
241 | static struct platform_device spi_bfin_master_device = { | ||
242 | .name = "bfin-spi", | ||
243 | .id = 0, /* Bus number */ | ||
244 | .num_resources = ARRAY_SIZE(bfin_spi0_resource), | ||
245 | .resource = bfin_spi0_resource, | ||
246 | .dev = { | ||
247 | .platform_data = &spi_bfin_master_info, /* Passed to driver */ | ||
248 | }, | ||
249 | }; | ||
250 | #endif | ||
251 | |||
252 | #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) | ||
253 | #ifdef CONFIG_SERIAL_BFIN_UART0 | ||
254 | static struct resource bfin_uart0_resources[] = { | ||
255 | { | ||
256 | .start = UART0_THR, | ||
257 | .end = UART0_GCTL+2, | ||
258 | .flags = IORESOURCE_MEM, | ||
259 | }, | ||
260 | { | ||
261 | .start = IRQ_UART0_RX, | ||
262 | .end = IRQ_UART0_RX+1, | ||
263 | .flags = IORESOURCE_IRQ, | ||
264 | }, | ||
265 | { | ||
266 | .start = IRQ_UART0_ERROR, | ||
267 | .end = IRQ_UART0_ERROR, | ||
268 | .flags = IORESOURCE_IRQ, | ||
269 | }, | ||
270 | { | ||
271 | .start = CH_UART0_TX, | ||
272 | .end = CH_UART0_TX, | ||
273 | .flags = IORESOURCE_DMA, | ||
274 | }, | ||
275 | { | ||
276 | .start = CH_UART0_RX, | ||
277 | .end = CH_UART0_RX, | ||
278 | .flags = IORESOURCE_DMA, | ||
279 | }, | ||
280 | }; | ||
281 | |||
282 | static unsigned short bfin_uart0_peripherals[] = { | ||
283 | P_UART0_TX, P_UART0_RX, 0 | ||
284 | }; | ||
285 | |||
286 | static struct platform_device bfin_uart0_device = { | ||
287 | .name = "bfin-uart", | ||
288 | .id = 0, | ||
289 | .num_resources = ARRAY_SIZE(bfin_uart0_resources), | ||
290 | .resource = bfin_uart0_resources, | ||
291 | .dev = { | ||
292 | .platform_data = &bfin_uart0_peripherals, /* Passed to driver */ | ||
293 | }, | ||
294 | }; | ||
295 | #endif | ||
296 | |||
297 | #ifdef CONFIG_SERIAL_BFIN_UART1 | ||
298 | static struct resource bfin_uart1_resources[] = { | ||
299 | { | ||
300 | .start = UART1_THR, | ||
301 | .end = UART1_GCTL+2, | ||
302 | .flags = IORESOURCE_MEM, | ||
303 | }, | ||
304 | { | ||
305 | .start = IRQ_UART1_RX, | ||
306 | .end = IRQ_UART1_RX+1, | ||
307 | .flags = IORESOURCE_IRQ, | ||
308 | }, | ||
309 | { | ||
310 | .start = IRQ_UART1_ERROR, | ||
311 | .end = IRQ_UART1_ERROR, | ||
312 | .flags = IORESOURCE_IRQ, | ||
313 | }, | ||
314 | { | ||
315 | .start = CH_UART1_TX, | ||
316 | .end = CH_UART1_TX, | ||
317 | .flags = IORESOURCE_DMA, | ||
318 | }, | ||
319 | { | ||
320 | .start = CH_UART1_RX, | ||
321 | .end = CH_UART1_RX, | ||
322 | .flags = IORESOURCE_DMA, | ||
323 | }, | ||
324 | }; | ||
325 | |||
326 | static unsigned short bfin_uart1_peripherals[] = { | ||
327 | P_UART1_TX, P_UART1_RX, 0 | ||
328 | }; | ||
329 | |||
330 | static struct platform_device bfin_uart1_device = { | ||
331 | .name = "bfin-uart", | ||
332 | .id = 1, | ||
333 | .num_resources = ARRAY_SIZE(bfin_uart1_resources), | ||
334 | .resource = bfin_uart1_resources, | ||
335 | .dev = { | ||
336 | .platform_data = &bfin_uart1_peripherals, /* Passed to driver */ | ||
337 | }, | ||
338 | }; | ||
339 | #endif | ||
340 | #endif | ||
341 | |||
342 | #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) | ||
343 | static struct resource bfin_twi0_resource[] = { | ||
344 | [0] = { | ||
345 | .start = TWI0_REGBASE, | ||
346 | .end = TWI0_REGBASE + 0xff, | ||
347 | .flags = IORESOURCE_MEM, | ||
348 | }, | ||
349 | [1] = { | ||
350 | .start = IRQ_TWI, | ||
351 | .end = IRQ_TWI, | ||
352 | .flags = IORESOURCE_IRQ, | ||
353 | }, | ||
354 | }; | ||
355 | |||
356 | static struct platform_device i2c_bfin_twi_device = { | ||
357 | .name = "i2c-bfin-twi", | ||
358 | .id = 0, | ||
359 | .num_resources = ARRAY_SIZE(bfin_twi0_resource), | ||
360 | .resource = bfin_twi0_resource, | ||
361 | }; | ||
362 | #endif | ||
363 | |||
364 | static struct platform_device *dnp5370_devices[] __initdata = { | ||
365 | |||
366 | #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) | ||
367 | #ifdef CONFIG_SERIAL_BFIN_UART0 | ||
368 | &bfin_uart0_device, | ||
369 | #endif | ||
370 | #ifdef CONFIG_SERIAL_BFIN_UART1 | ||
371 | &bfin_uart1_device, | ||
372 | #endif | ||
373 | #endif | ||
374 | |||
375 | #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) | ||
376 | &asmb_flash_device, | ||
377 | #endif | ||
378 | |||
379 | #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) | ||
380 | &bfin_mii_bus, | ||
381 | &bfin_mac_device, | ||
382 | #endif | ||
383 | |||
384 | #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) | ||
385 | &spi_bfin_master_device, | ||
386 | #endif | ||
387 | |||
388 | #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) | ||
389 | &i2c_bfin_twi_device, | ||
390 | #endif | ||
391 | |||
392 | #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) | ||
393 | &rtc_device, | ||
394 | #endif | ||
395 | |||
396 | }; | ||
397 | |||
398 | static int __init dnp5370_init(void) | ||
399 | { | ||
400 | printk(KERN_INFO "DNP/5370: registering device resources\n"); | ||
401 | platform_add_devices(dnp5370_devices, ARRAY_SIZE(dnp5370_devices)); | ||
402 | printk(KERN_INFO "DNP/5370: registering %zu SPI slave devices\n", | ||
403 | ARRAY_SIZE(bfin_spi_board_info)); | ||
404 | spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); | ||
405 | printk(KERN_INFO "DNP/5370: MAC %pM\n", (void *)FLASH_MAC); | ||
406 | return 0; | ||
407 | } | ||
408 | arch_initcall(dnp5370_init); | ||
409 | |||
410 | /* | ||
411 | * Currently the MAC address is saved in Flash by U-Boot | ||
412 | */ | ||
413 | void bfin_get_ether_addr(char *addr) | ||
414 | { | ||
415 | *(u32 *)(&(addr[0])) = bfin_read32(FLASH_MAC); | ||
416 | *(u16 *)(&(addr[4])) = bfin_read16(FLASH_MAC + 4); | ||
417 | } | ||
418 | EXPORT_SYMBOL(bfin_get_ether_addr); | ||