258 files changed, 4348 insertions, 3852 deletions
diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c
index e255164ff087..a8fce3ccc707 100644
--- a/arch/arm/mach-omap1/board-ams-delta.c
+++ b/arch/arm/mach-omap1/board-ams-delta.c
@@ -625,7 +625,6 @@ MACHINE_START(AMS_DELTA, "Amstrad E3 (Delta)")
        .atag_offset    = 0x100,
        .map_io         = ams_delta_map_io,
        .init_early     = omap1_init_early,
-        .reserve        = omap_reserve,
        .init_irq       = omap1_init_irq,
        .init_machine   = ams_delta_init,
        .init_late      = ams_delta_init_late,
diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c
index 4b6de70c47a6..8b5800acf726 100644
--- a/arch/arm/mach-omap1/board-fsample.c
+++ b/arch/arm/mach-omap1/board-fsample.c
@@ -27,10 +27,10 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
-#include <plat/tc.h>
+#include <mach/tc.h>
 #include <mach/mux.h>
 #include <mach/flash.h>
-#include <plat/fpga.h>
+#include <../plat-omap/fpga.h>
 #include <linux/platform_data/keypad-omap.h>
 #include <mach/hardware.h>
@@ -123,9 +123,9 @@ static struct resource smc91x_resources[] = {
 static void __init fsample_init_smc91x(void)
 {
-        fpga_write(1, H2P2_DBG_FPGA_LAN_RESET);
+        __raw_writeb(1, H2P2_DBG_FPGA_LAN_RESET);
        mdelay(50);
-        fpga_write(fpga_read(H2P2_DBG_FPGA_LAN_RESET) & ~1,
+        __raw_writeb(__raw_readb(H2P2_DBG_FPGA_LAN_RESET) & ~1,
                   H2P2_DBG_FPGA_LAN_RESET);
        mdelay(50);
 }
@@ -362,7 +362,6 @@ MACHINE_START(OMAP_FSAMPLE, "OMAP730 F-Sample")
        .atag_offset    = 0x100,
        .map_io         = omap_fsample_map_io,
        .init_early     = omap1_init_early,
-        .reserve        = omap_reserve,
        .init_irq       = omap1_init_irq,
        .init_machine   = omap_fsample_init,
        .init_late      = omap1_init_late,
diff --git a/arch/arm/mach-omap1/board-generic.c b/arch/arm/mach-omap1/board-generic.c
index 4ec579fdd366..608e7d2a2778 100644
--- a/arch/arm/mach-omap1/board-generic.c
+++ b/arch/arm/mach-omap1/board-generic.c
@@ -81,7 +81,6 @@ MACHINE_START(OMAP_GENERIC, "Generic OMAP1510/1610/1710")
        .atag_offset    = 0x100,
        .map_io         = omap16xx_map_io,
        .init_early     = omap1_init_early,
-        .reserve        = omap_reserve,
        .init_irq       = omap1_init_irq,
        .init_machine   = omap_generic_init,
        .init_late      = omap1_init_late,
diff --git a/arch/arm/mach-omap1/board-h2-mmc.c b/arch/arm/mach-omap1/board-h2-mmc.c
index e1362ce48497..7119ef28e0ad 100644
--- a/arch/arm/mach-omap1/board-h2-mmc.c
+++ b/arch/arm/mach-omap1/board-h2-mmc.c
@@ -13,12 +13,11 @@
 */
 #include <linux/gpio.h>
 #include <linux/platform_device.h>
+#include <linux/platform_data/gpio-omap.h>
 #include <linux/i2c/tps65010.h>
-#include <plat/mmc.h>
 #include "board-h2.h"
+#include "mmc.h"
 #if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c
index 376f7f29ef77..9134b646f01b 100644
--- a/arch/arm/mach-omap1/board-h2.c
+++ b/arch/arm/mach-omap1/board-h2.c
@@ -39,8 +39,8 @@
 #include <asm/mach/map.h>
 #include <mach/mux.h>
-#include <plat/dma.h>
+#include <plat-omap/dma-omap.h>
-#include <plat/tc.h>
+#include <mach/tc.h>
 #include <mach/irda.h>
 #include <linux/platform_data/keypad-omap.h>
 #include <mach/flash.h>
@@ -50,6 +50,7 @@
 #include "common.h"
 #include "board-h2.h"
+#include "dma.h"
 /* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */
 #define OMAP1610_ETHR_START             0x04000300
@@ -458,7 +459,6 @@ MACHINE_START(OMAP_H2, "TI-H2")
        .atag_offset    = 0x100,
        .map_io         = omap16xx_map_io,
        .init_early     = omap1_init_early,
-        .reserve        = omap_reserve,
        .init_irq       = omap1_init_irq,
        .init_machine   = h2_init,
        .init_late      = omap1_init_late,
diff --git a/arch/arm/mach-omap1/board-h3-mmc.c b/arch/arm/mach-omap1/board-h3-mmc.c
index c74daace8cd6..17d77914d769 100644
--- a/arch/arm/mach-omap1/board-h3-mmc.c
+++ b/arch/arm/mach-omap1/board-h3-mmc.c
@@ -16,9 +16,8 @@
 #include <linux/i2c/tps65010.h>
-#include <plat/mmc.h>
 #include "board-h3.h"
+#include "mmc.h"
 #if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c
index ededdb7ef28c..bf213d1d8075 100644
--- a/arch/arm/mach-omap1/board-h3.c
+++ b/arch/arm/mach-omap1/board-h3.c
@@ -41,9 +41,9 @@
 #include <asm/mach/map.h>
 #include <mach/mux.h>
-#include <plat/tc.h>
+#include <mach/tc.h>
 #include <linux/platform_data/keypad-omap.h>
-#include <plat/dma.h>
+#include <plat-omap/dma-omap.h>
 #include <mach/flash.h>
 #include <mach/hardware.h>
@@ -452,7 +452,6 @@ MACHINE_START(OMAP_H3, "TI OMAP1710 H3 board")
        .atag_offset    = 0x100,
        .map_io         = omap16xx_map_io,
        .init_early     = omap1_init_early,
-        .reserve        = omap_reserve,
        .init_irq       = omap1_init_irq,
        .init_machine   = h3_init,
        .init_late      = omap1_init_late,
diff --git a/arch/arm/mach-omap1/board-htcherald.c b/arch/arm/mach-omap1/board-htcherald.c
index 87ab2086ef96..356f816c84a6 100644
--- a/arch/arm/mach-omap1/board-htcherald.c
+++ b/arch/arm/mach-omap1/board-htcherald.c
@@ -43,7 +43,7 @@
 #include <asm/mach/arch.h>
 #include <mach/omap7xx.h>
-#include <plat/mmc.h>
+#include "mmc.h"
 #include <mach/irqs.h>
 #include <mach/usb.h>
@@ -600,7 +600,6 @@ MACHINE_START(HERALD, "HTC Herald")
        .atag_offset    = 0x100,
        .map_io         = htcherald_map_io,
        .init_early     = omap1_init_early,
-        .reserve        = omap_reserve,
        .init_irq       = omap1_init_irq,
        .init_machine   = htcherald_init,
        .init_late      = omap1_init_late,
diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c
index db5f7d2976e7..c66334f22471 100644
--- a/arch/arm/mach-omap1/board-innovator.c
+++ b/arch/arm/mach-omap1/board-innovator.c
@@ -33,16 +33,16 @@
 #include <mach/mux.h>
 #include <mach/flash.h>
-#include <plat/fpga.h>
+#include <../plat-omap/fpga.h>
-#include <plat/tc.h>
+#include <mach/tc.h>
 #include <linux/platform_data/keypad-omap.h>
-#include <plat/mmc.h>
 #include <mach/hardware.h>
 #include <mach/usb.h>
 #include "iomap.h"
 #include "common.h"
+#include "mmc.h"
 /* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */
 #define INNOVATOR1610_ETHR_START        0x04000300
@@ -215,7 +215,7 @@ static struct platform_device *innovator1510_devices[] __initdata = {
 static int innovator_get_pendown_state(void)
 {
-        return !(fpga_read(OMAP1510_FPGA_TOUCHSCREEN) & (1 << 5));
+        return !(__raw_readb(OMAP1510_FPGA_TOUCHSCREEN) & (1 << 5));
 }
 static const struct ads7846_platform_data innovator1510_ts_info = {
@@ -279,7 +279,7 @@ static struct platform_device *innovator1610_devices[] __initdata = {
 static void __init innovator_init_smc91x(void)
 {
        if (cpu_is_omap1510()) {
-                fpga_write(fpga_read(OMAP1510_FPGA_RST) & ~1,
+                __raw_writeb(__raw_readb(OMAP1510_FPGA_RST) & ~1,
                           OMAP1510_FPGA_RST);
                udelay(750);
        } else {
@@ -335,10 +335,10 @@ static int mmc_set_power(struct device *dev, int slot, int power_on,
                                int vdd)
 {
        if (power_on)
-                fpga_write(fpga_read(OMAP1510_FPGA_POWER) | (1 << 3),
+                __raw_writeb(__raw_readb(OMAP1510_FPGA_POWER) | (1 << 3),
                                OMAP1510_FPGA_POWER);
        else
-                fpga_write(fpga_read(OMAP1510_FPGA_POWER) & ~(1 << 3),
+                __raw_writeb(__raw_readb(OMAP1510_FPGA_POWER) & ~(1 << 3),
                                OMAP1510_FPGA_POWER);
        return 0;
@@ -390,14 +390,14 @@ static void __init innovator_init(void)
                omap_cfg_reg(UART3_TX);
                omap_cfg_reg(UART3_RX);
-                reg = fpga_read(OMAP1510_FPGA_POWER);
+                reg = __raw_readb(OMAP1510_FPGA_POWER);
                reg |= OMAP1510_FPGA_PCR_COM1_EN;
-                fpga_write(reg, OMAP1510_FPGA_POWER);
+                __raw_writeb(reg, OMAP1510_FPGA_POWER);
                udelay(10);
-                reg = fpga_read(OMAP1510_FPGA_POWER);
+                reg = __raw_readb(OMAP1510_FPGA_POWER);
                reg |= OMAP1510_FPGA_PCR_COM2_EN;
-                fpga_write(reg, OMAP1510_FPGA_POWER);
+                __raw_writeb(reg, OMAP1510_FPGA_POWER);
                udelay(10);
                platform_add_devices(innovator1510_devices, ARRAY_SIZE(innovator1510_devices));
@@ -437,6 +437,7 @@ static void __init innovator_init(void)
 */
 static void __init innovator_map_io(void)
 {
+#ifdef CONFIG_ARCH_OMAP15XX
        omap15xx_map_io();
        iotable_init(innovator1510_io_desc, ARRAY_SIZE(innovator1510_io_desc));
@@ -444,9 +445,10 @@ static void __init innovator_map_io(void)
        /* Dump the Innovator FPGA rev early - useful info for support. */
        pr_debug("Innovator FPGA Rev %d.%d Board Rev %d\n",
-                        fpga_read(OMAP1510_FPGA_REV_HIGH),
+                        __raw_readb(OMAP1510_FPGA_REV_HIGH),
-                        fpga_read(OMAP1510_FPGA_REV_LOW),
+                        __raw_readb(OMAP1510_FPGA_REV_LOW),
-                        fpga_read(OMAP1510_FPGA_BOARD_REV));
+                        __raw_readb(OMAP1510_FPGA_BOARD_REV));
+#endif
 }
 MACHINE_START(OMAP_INNOVATOR, "TI-Innovator")
@@ -454,7 +456,6 @@ MACHINE_START(OMAP_INNOVATOR, "TI-Innovator")
        .atag_offset    = 0x100,
        .map_io         = innovator_map_io,
        .init_early     = omap1_init_early,
-        .reserve        = omap_reserve,
        .init_irq       = omap1_init_irq,
        .init_machine   = innovator_init,
        .init_late      = omap1_init_late,
diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c
index 7d5c06d6a52a..3e8ead67e459 100644
--- a/arch/arm/mach-omap1/board-nokia770.c
+++ b/arch/arm/mach-omap1/board-nokia770.c
@@ -29,13 +29,13 @@
 #include <asm/mach/map.h>
 #include <mach/mux.h>
-#include <plat/mmc.h>
-#include <plat/clock.h>
 #include <mach/hardware.h>
 #include <mach/usb.h>
 #include "common.h"
+#include "clock.h"
+#include "mmc.h"
 #define ADS7846_PENDOWN_GPIO    15
@@ -251,7 +251,6 @@ MACHINE_START(NOKIA770, "Nokia 770")
        .atag_offset    = 0x100,
        .map_io         = omap16xx_map_io,
        .init_early     = omap1_init_early,
-        .reserve        = omap_reserve,
        .init_irq       = omap1_init_irq,
        .init_machine   = omap_nokia770_init,
        .init_late      = omap1_init_late,
diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
index 5973945a8741..872ea47cd28a 100644
--- a/arch/arm/mach-omap1/board-osk.c
+++ b/arch/arm/mach-omap1/board-osk.c
@@ -48,7 +48,7 @@
 #include <mach/flash.h>
 #include <mach/mux.h>
-#include <plat/tc.h>
+#include <mach/tc.h>
 #include <mach/hardware.h>
 #include <mach/usb.h>
@@ -606,7 +606,6 @@ MACHINE_START(OMAP_OSK, "TI-OSK")
        .atag_offset    = 0x100,
        .map_io         = omap16xx_map_io,
        .init_early     = omap1_init_early,
-        .reserve        = omap_reserve,
        .init_irq       = omap1_init_irq,
        .init_machine   = osk_init,
        .init_late      = omap1_init_late,
diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c
index 1c578d58923a..584b6fab894b 100644
--- a/arch/arm/mach-omap1/board-palmte.c
+++ b/arch/arm/mach-omap1/board-palmte.c
@@ -36,8 +36,8 @@
 #include <mach/flash.h>
 #include <mach/mux.h>
-#include <plat/tc.h>
+#include <mach/tc.h>
-#include <plat/dma.h>
+#include <plat-omap/dma-omap.h>
 #include <mach/irda.h>
 #include <linux/platform_data/keypad-omap.h>
@@ -45,6 +45,7 @@
 #include <mach/usb.h>
 #include "common.h"
+#include "dma.h"
 #define PALMTE_USBDETECT_GPIO   0
 #define PALMTE_USB_OR_DC_GPIO   1
@@ -264,7 +265,6 @@ MACHINE_START(OMAP_PALMTE, "OMAP310 based Palm Tungsten E")
        .atag_offset    = 0x100,
        .map_io         = omap15xx_map_io,
        .init_early     = omap1_init_early,
-        .reserve        = omap_reserve,
        .init_irq       = omap1_init_irq,
        .init_machine   = omap_palmte_init,
        .init_late      = omap1_init_late,
diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c
index 97158095083c..fbc986bfe69e 100644
--- a/arch/arm/mach-omap1/board-palmtt.c
+++ b/arch/arm/mach-omap1/board-palmtt.c
@@ -28,16 +28,16 @@
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
 #include <linux/platform_data/omap1_bl.h>
+#include <linux/platform_data/leds-omap.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
-#include <plat/led.h>
 #include <mach/flash.h>
 #include <mach/mux.h>
-#include <plat/dma.h>
+#include <plat-omap/dma-omap.h>
-#include <plat/tc.h>
+#include <mach/tc.h>
 #include <mach/irda.h>
 #include <linux/platform_data/keypad-omap.h>
@@ -45,6 +45,7 @@
 #include <mach/usb.h>
 #include "common.h"
+#include "dma.h"
 #define PALMTT_USBDETECT_GPIO   0
 #define PALMTT_CABLE_GPIO       1
@@ -310,7 +311,6 @@ MACHINE_START(OMAP_PALMTT, "OMAP1510 based Palm Tungsten|T")
        .atag_offset    = 0x100,
        .map_io         = omap15xx_map_io,
        .init_early     = omap1_init_early,
-        .reserve        = omap_reserve,
        .init_irq       = omap1_init_irq,
        .init_machine   = omap_palmtt_init,
        .init_late      = omap1_init_late,
diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c
index e311032e7eeb..60d917a93763 100644
--- a/arch/arm/mach-omap1/board-palmz71.c
+++ b/arch/arm/mach-omap1/board-palmz71.c
@@ -38,8 +38,8 @@
 #include <mach/flash.h>
 #include <mach/mux.h>
-#include <plat/dma.h>
+#include <plat-omap/dma-omap.h>
-#include <plat/tc.h>
+#include <mach/tc.h>
 #include <mach/irda.h>
 #include <linux/platform_data/keypad-omap.h>
@@ -47,6 +47,7 @@
 #include <mach/usb.h>
 #include "common.h"
+#include "dma.h"
 #define PALMZ71_USBDETECT_GPIO  0
 #define PALMZ71_PENIRQ_GPIO     6
@@ -326,7 +327,6 @@ MACHINE_START(OMAP_PALMZ71, "OMAP310 based Palm Zire71")
        .atag_offset    = 0x100,
        .map_io         = omap15xx_map_io,
        .init_early     = omap1_init_early,
-        .reserve        = omap_reserve,
        .init_irq       = omap1_init_irq,
        .init_machine   = omap_palmz71_init,
        .init_late      = omap1_init_late,
diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c
index 198b05417bfc..030bd48727be 100644
--- a/arch/arm/mach-omap1/board-perseus2.c
+++ b/arch/arm/mach-omap1/board-perseus2.c
@@ -28,9 +28,9 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
-#include <plat/tc.h>
+#include <mach/tc.h>
 #include <mach/mux.h>
-#include <plat/fpga.h>
+#include <../plat-omap/fpga.h>
 #include <mach/flash.h>
 #include <mach/hardware.h>
@@ -231,9 +231,9 @@ static struct omap_lcd_config perseus2_lcd_config __initdata = {
 static void __init perseus2_init_smc91x(void)
 {
-        fpga_write(1, H2P2_DBG_FPGA_LAN_RESET);
+        __raw_writeb(1, H2P2_DBG_FPGA_LAN_RESET);
        mdelay(50);
-        fpga_write(fpga_read(H2P2_DBG_FPGA_LAN_RESET) & ~1,
+        __raw_writeb(__raw_readb(H2P2_DBG_FPGA_LAN_RESET) & ~1,
                   H2P2_DBG_FPGA_LAN_RESET);
        mdelay(50);
 }
@@ -324,7 +324,6 @@ MACHINE_START(OMAP_PERSEUS2, "OMAP730 Perseus2")
        .atag_offset    = 0x100,
        .map_io         = omap_perseus2_map_io,
        .init_early     = omap1_init_early,
-        .reserve        = omap_reserve,
        .init_irq       = omap1_init_irq,
        .init_machine   = omap_perseus2_init,
        .init_late      = omap1_init_late,
diff --git a/arch/arm/mach-omap1/board-sx1-mmc.c b/arch/arm/mach-omap1/board-sx1-mmc.c
index 5932d56e17bf..4fcf19c78a08 100644
--- a/arch/arm/mach-omap1/board-sx1-mmc.c
+++ b/arch/arm/mach-omap1/board-sx1-mmc.c
@@ -16,9 +16,10 @@
 #include <linux/platform_device.h>
 #include <mach/hardware.h>
-#include <plat/mmc.h>
 #include <mach/board-sx1.h>
+#include "mmc.h"
 #if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
 static int mmc_set_power(struct device *dev, int slot, int power_on,
diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c
index 13bf2cc56814..1ebc7e08d6e5 100644
--- a/arch/arm/mach-omap1/board-sx1.c
+++ b/arch/arm/mach-omap1/board-sx1.c
@@ -36,15 +36,16 @@
 #include <mach/flash.h>
 #include <mach/mux.h>
-#include <plat/dma.h>
+#include <plat-omap/dma-omap.h>
 #include <mach/irda.h>
-#include <plat/tc.h>
+#include <mach/tc.h>
 #include <mach/board-sx1.h>
 #include <mach/hardware.h>
 #include <mach/usb.h>
 #include "common.h"
+#include "dma.h"
 /* Write to I2C device */
 int sx1_i2c_write_byte(u8 devaddr, u8 regoffset, u8 value)
@@ -403,7 +404,6 @@ MACHINE_START(SX1, "OMAP310 based Siemens SX1")
        .atag_offset    = 0x100,
        .map_io         = omap15xx_map_io,
        .init_early     = omap1_init_early,
-        .reserve        = omap_reserve,
        .init_irq       = omap1_init_irq,
        .init_machine   = omap_sx1_init,
        .init_late      = omap1_init_late,
diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c
index ad75e3411d46..abf705f49b19 100644
--- a/arch/arm/mach-omap1/board-voiceblue.c
+++ b/arch/arm/mach-omap1/board-voiceblue.c
@@ -34,7 +34,7 @@
 #include <mach/board-voiceblue.h>
 #include <mach/flash.h>
 #include <mach/mux.h>
-#include <plat/tc.h>
+#include <mach/tc.h>
 #include <mach/hardware.h>
 #include <mach/usb.h>
@@ -286,7 +286,6 @@ MACHINE_START(VOICEBLUE, "VoiceBlue OMAP5910")
        .atag_offset    = 0x100,
        .map_io         = omap15xx_map_io,
        .init_early     = omap1_init_early,
-        .reserve        = omap_reserve,
        .init_irq       = omap1_init_irq,
        .init_machine   = voiceblue_init,
        .init_late      = omap1_init_late,
diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c
index 638f4070fc70..9e74aa664acb 100644
--- a/arch/arm/mach-omap1/clock.c
+++ b/arch/arm/mach-omap1/clock.c
@@ -12,6 +12,7 @@
 * published by the Free Software Foundation.
 */
 #include <linux/kernel.h>
+#include <linux/export.h>
 #include <linux/list.h>
 #include <linux/errno.h>
 #include <linux/err.h>
@@ -21,14 +22,13 @@
 #include <asm/mach-types.h>
-#include <plat/cpu.h>
+#include "soc.h"
 #include <plat/usb.h>
-#include <plat/clock.h>
-#include <plat/sram.h>
-#include <plat/clkdev_omap.h>
 #include <mach/hardware.h>
+#include "../plat-omap/sram.h"
 #include "iomap.h"
 #include "clock.h"
 #include "opp.h"
@@ -36,6 +36,10 @@
 __u32 arm_idlect1_mask;
 struct clk *api_ck_p, *ck_dpll1_p, *ck_ref_p;
+static LIST_HEAD(clocks);
+static DEFINE_MUTEX(clocks_mutex);
+static DEFINE_SPINLOCK(clockfw_lock);
 /*
 * Omap1 specific clock functions
 */
@@ -607,3 +611,497 @@ void omap1_clk_disable_unused(struct clk *clk)
 }
 #endif
+int clk_enable(struct clk *clk)
+{
+        unsigned long flags;
+        int ret;
+        if (clk == NULL || IS_ERR(clk))
+                return -EINVAL;
+        spin_lock_irqsave(&clockfw_lock, flags);
+        ret = omap1_clk_enable(clk);
+        spin_unlock_irqrestore(&clockfw_lock, flags);
+        return ret;
+}
+EXPORT_SYMBOL(clk_enable);
+void clk_disable(struct clk *clk)
+{
+        unsigned long flags;
+        if (clk == NULL || IS_ERR(clk))
+                return;
+        spin_lock_irqsave(&clockfw_lock, flags);
+        if (clk->usecount == 0) {
+                pr_err("Trying disable clock %s with 0 usecount\n",
+                       clk->name);
+                WARN_ON(1);
+                goto out;
+        }
+        omap1_clk_disable(clk);
+out:
+        spin_unlock_irqrestore(&clockfw_lock, flags);
+}
+EXPORT_SYMBOL(clk_disable);
+unsigned long clk_get_rate(struct clk *clk)
+{
+        unsigned long flags;
+        unsigned long ret;
+        if (clk == NULL || IS_ERR(clk))
+                return 0;
+        spin_lock_irqsave(&clockfw_lock, flags);
+        ret = clk->rate;
+        spin_unlock_irqrestore(&clockfw_lock, flags);
+        return ret;
+}
+EXPORT_SYMBOL(clk_get_rate);
+/*
+ * Optional clock functions defined in include/linux/clk.h
+ */
+long clk_round_rate(struct clk *clk, unsigned long rate)
+{
+        unsigned long flags;
+        long ret;
+        if (clk == NULL || IS_ERR(clk))
+                return 0;
+        spin_lock_irqsave(&clockfw_lock, flags);
+        ret = omap1_clk_round_rate(clk, rate);
+        spin_unlock_irqrestore(&clockfw_lock, flags);
+        return ret;
+}
+EXPORT_SYMBOL(clk_round_rate);
+int clk_set_rate(struct clk *clk, unsigned long rate)
+{
+        unsigned long flags;
+        int ret = -EINVAL;
+        if (clk == NULL || IS_ERR(clk))
+                return ret;
+        spin_lock_irqsave(&clockfw_lock, flags);
+        ret = omap1_clk_set_rate(clk, rate);
+        if (ret == 0)
+                propagate_rate(clk);
+        spin_unlock_irqrestore(&clockfw_lock, flags);
+        return ret;
+}
+EXPORT_SYMBOL(clk_set_rate);
+int clk_set_parent(struct clk *clk, struct clk *parent)
+{
+        WARN_ONCE(1, "clk_set_parent() not implemented for OMAP1\n");
+        return -EINVAL;
+}
+EXPORT_SYMBOL(clk_set_parent);
+struct clk *clk_get_parent(struct clk *clk)
+{
+        return clk->parent;
+}
+EXPORT_SYMBOL(clk_get_parent);
+/*
+ * OMAP specific clock functions shared between omap1 and omap2
+ */
+int __initdata mpurate;
+/*
+ * By default we use the rate set by the bootloader.
+ * You can override this with mpurate= cmdline option.
+ */
+static int __init omap_clk_setup(char *str)
+{
+        get_option(&str, &mpurate);
+        if (!mpurate)
+                return 1;
+        if (mpurate < 1000)
+                mpurate *= 1000000;
+        return 1;
+}
+__setup("mpurate=", omap_clk_setup);
+/* Used for clocks that always have same value as the parent clock */
+unsigned long followparent_recalc(struct clk *clk)
+{
+        return clk->parent->rate;
+}
+/*
+ * Used for clocks that have the same value as the parent clock,
+ * divided by some factor
+ */
+unsigned long omap_fixed_divisor_recalc(struct clk *clk)
+{
+        WARN_ON(!clk->fixed_div);
+        return clk->parent->rate / clk->fixed_div;
+}
+void clk_reparent(struct clk *child, struct clk *parent)
+{
+        list_del_init(&child->sibling);
+        if (parent)
+                list_add(&child->sibling, &parent->children);
+        child->parent = parent;
+        /* now do the debugfs renaming to reattach the child
+           to the proper parent */
+}
+/* Propagate rate to children */
+void propagate_rate(struct clk *tclk)
+{
+        struct clk *clkp;
+        list_for_each_entry(clkp, &tclk->children, sibling) {
+                if (clkp->recalc)
+                        clkp->rate = clkp->recalc(clkp);
+                propagate_rate(clkp);
+        }
+}
+static LIST_HEAD(root_clks);
+/**
+ * recalculate_root_clocks - recalculate and propagate all root clocks
+ *
+ * Recalculates all root clocks (clocks with no parent), which if the
+ * clock's .recalc is set correctly, should also propagate their rates.
+ * Called at init.
+ */
+void recalculate_root_clocks(void)
+{
+        struct clk *clkp;
+        list_for_each_entry(clkp, &root_clks, sibling) {
+                if (clkp->recalc)
+                        clkp->rate = clkp->recalc(clkp);
+                propagate_rate(clkp);
+        }
+}
+/**
+ * clk_preinit - initialize any fields in the struct clk before clk init
+ * @clk: struct clk * to initialize
+ *
+ * Initialize any struct clk fields needed before normal clk initialization
+ * can run.  No return value.
+ */
+void clk_preinit(struct clk *clk)
+{
+        INIT_LIST_HEAD(&clk->children);
+}
+int clk_register(struct clk *clk)
+{
+        if (clk == NULL || IS_ERR(clk))
+                return -EINVAL;
+        /*
+         * trap out already registered clocks
+         */
+        if (clk->node.next || clk->node.prev)
+                return 0;
+        mutex_lock(&clocks_mutex);
+        if (clk->parent)
+                list_add(&clk->sibling, &clk->parent->children);
+        else
+                list_add(&clk->sibling, &root_clks);
+        list_add(&clk->node, &clocks);
+        if (clk->init)
+                clk->init(clk);
+        mutex_unlock(&clocks_mutex);
+        return 0;
+}
+EXPORT_SYMBOL(clk_register);
+void clk_unregister(struct clk *clk)
+{
+        if (clk == NULL || IS_ERR(clk))
+                return;
+        mutex_lock(&clocks_mutex);
+        list_del(&clk->sibling);
+        list_del(&clk->node);
+        mutex_unlock(&clocks_mutex);
+}
+EXPORT_SYMBOL(clk_unregister);
+void clk_enable_init_clocks(void)
+{
+        struct clk *clkp;
+        list_for_each_entry(clkp, &clocks, node)
+                if (clkp->flags & ENABLE_ON_INIT)
+                        clk_enable(clkp);
+}
+/**
+ * omap_clk_get_by_name - locate OMAP struct clk by its name
+ * @name: name of the struct clk to locate
+ *
+ * Locate an OMAP struct clk by its name.  Assumes that struct clk
+ * names are unique.  Returns NULL if not found or a pointer to the
+ * struct clk if found.
+ */
+struct clk *omap_clk_get_by_name(const char *name)
+{
+        struct clk *c;
+        struct clk *ret = NULL;
+        mutex_lock(&clocks_mutex);
+        list_for_each_entry(c, &clocks, node) {
+                if (!strcmp(c->name, name)) {
+                        ret = c;
+                        break;
+                }
+        }
+        mutex_unlock(&clocks_mutex);
+        return ret;
+}
+int omap_clk_enable_autoidle_all(void)
+{
+        struct clk *c;
+        unsigned long flags;
+        spin_lock_irqsave(&clockfw_lock, flags);
+        list_for_each_entry(c, &clocks, node)
+                if (c->ops->allow_idle)
+                        c->ops->allow_idle(c);
+        spin_unlock_irqrestore(&clockfw_lock, flags);
+        return 0;
+}
+int omap_clk_disable_autoidle_all(void)
+{
+        struct clk *c;
+        unsigned long flags;
+        spin_lock_irqsave(&clockfw_lock, flags);
+        list_for_each_entry(c, &clocks, node)
+                if (c->ops->deny_idle)
+                        c->ops->deny_idle(c);
+        spin_unlock_irqrestore(&clockfw_lock, flags);
+        return 0;
+}
+/*
+ * Low level helpers
+ */
+static int clkll_enable_null(struct clk *clk)
+{
+        return 0;
+}
+static void clkll_disable_null(struct clk *clk)
+{
+}
+const struct clkops clkops_null = {
+        .enable         = clkll_enable_null,
+        .disable        = clkll_disable_null,
+};
+/*
+ * Dummy clock
+ *
+ * Used for clock aliases that are needed on some OMAPs, but not others
+ */
+struct clk dummy_ck = {
+        .name   = "dummy",
+        .ops    = &clkops_null,
+};
+/*
+ *
+ */
+#ifdef CONFIG_OMAP_RESET_CLOCKS
+/*
+ * Disable any unused clocks left on by the bootloader
+ */
+static int __init clk_disable_unused(void)
+{
+        struct clk *ck;
+        unsigned long flags;
+        pr_info("clock: disabling unused clocks to save power\n");
+        spin_lock_irqsave(&clockfw_lock, flags);
+        list_for_each_entry(ck, &clocks, node) {
+                if (ck->ops == &clkops_null)
+                        continue;
+                if (ck->usecount > 0 || !ck->enable_reg)
+                        continue;
+                omap1_clk_disable_unused(ck);
+        }
+        spin_unlock_irqrestore(&clockfw_lock, flags);
+        return 0;
+}
+late_initcall(clk_disable_unused);
+late_initcall(omap_clk_enable_autoidle_all);
+#endif
+#if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS)
+/*
+ *      debugfs support to trace clock tree hierarchy and attributes
+ */
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+static struct dentry *clk_debugfs_root;
+static int clk_dbg_show_summary(struct seq_file *s, void *unused)
+{
+        struct clk *c;
+        struct clk *pa;
+        mutex_lock(&clocks_mutex);
+        seq_printf(s, "%-30s %-30s %-10s %s\n",
+                   "clock-name", "parent-name", "rate", "use-count");
+        list_for_each_entry(c, &clocks, node) {
+                pa = c->parent;
+                seq_printf(s, "%-30s %-30s %-10lu %d\n",
+                           c->name, pa ? pa->name : "none", c->rate,
+                           c->usecount);
+        }
+        mutex_unlock(&clocks_mutex);
+        return 0;
+}
+static int clk_dbg_open(struct inode *inode, struct file *file)
+{
+        return single_open(file, clk_dbg_show_summary, inode->i_private);
+}
+static const struct file_operations debug_clock_fops = {
+        .open           = clk_dbg_open,
+        .read           = seq_read,
+        .llseek         = seq_lseek,
+        .release        = single_release,
+};
+static int clk_debugfs_register_one(struct clk *c)
+{
+        int err;
+        struct dentry *d;
+        struct clk *pa = c->parent;
+        d = debugfs_create_dir(c->name, pa ? pa->dent : clk_debugfs_root);
+        if (!d)
+                return -ENOMEM;
+        c->dent = d;
+        d = debugfs_create_u8("usecount", S_IRUGO, c->dent, (u8 *)&c->usecount);
+        if (!d) {
+                err = -ENOMEM;
+                goto err_out;
+        }
+        d = debugfs_create_u32("rate", S_IRUGO, c->dent, (u32 *)&c->rate);
+        if (!d) {
+                err = -ENOMEM;
+                goto err_out;
+        }
+        d = debugfs_create_x32("flags", S_IRUGO, c->dent, (u32 *)&c->flags);
+        if (!d) {
+                err = -ENOMEM;
+                goto err_out;
+        }
+        return 0;
+err_out:
+        debugfs_remove_recursive(c->dent);
+        return err;
+}
+static int clk_debugfs_register(struct clk *c)
+{
+        int err;
+        struct clk *pa = c->parent;
+        if (pa && !pa->dent) {
+                err = clk_debugfs_register(pa);
+                if (err)
+                        return err;
+        }
+        if (!c->dent) {
+                err = clk_debugfs_register_one(c);
+                if (err)
+                        return err;
+        }
+        return 0;
+}
+static int __init clk_debugfs_init(void)
+{
+        struct clk *c;
+        struct dentry *d;
+        int err;
+        d = debugfs_create_dir("clock", NULL);
+        if (!d)
+                return -ENOMEM;
+        clk_debugfs_root = d;
+        list_for_each_entry(c, &clocks, node) {
+                err = clk_debugfs_register(c);
+                if (err)
+                        goto err_out;
+        }
+        d = debugfs_create_file("summary", S_IRUGO,
+                d, NULL, &debug_clock_fops);
+        if (!d)
+                return -ENOMEM;
+        return 0;
+err_out:
+        debugfs_remove_recursive(clk_debugfs_root);
+        return err;
+}
+late_initcall(clk_debugfs_init);
+#endif /* defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS) */
diff --git a/arch/arm/mach-omap1/clock.h b/arch/arm/mach-omap1/clock.h
index 3d04f4f67676..1e4918a3a5ee 100644
--- a/arch/arm/mach-omap1/clock.h
+++ b/arch/arm/mach-omap1/clock.h
@@ -14,8 +14,184 @@
 #define __ARCH_ARM_MACH_OMAP1_CLOCK_H
 #include <linux/clk.h>
+#include <linux/list.h>
-#include <plat/clock.h>
+#include <linux/clkdev.h>
+struct module;
+struct clk;
+struct omap_clk {
+        u16                             cpu;
+        struct clk_lookup               lk;
+};
+#define CLK(dev, con, ck, cp)           \
+        {                               \
+                 .cpu = cp,             \
+                .lk = {                 \
+                        .dev_id = dev,  \
+                        .con_id = con,  \
+                        .clk = ck,      \
+                },                      \
+        }
+/* Platform flags for the clkdev-OMAP integration code */
+#define CK_310          (1 << 0)
+#define CK_7XX          (1 << 1)        /* 7xx, 850 */
+#define CK_1510         (1 << 2)
+#define CK_16XX         (1 << 3)        /* 16xx, 17xx, 5912 */
+#define CK_1710         (1 << 4)        /* 1710 extra for rate selection */
+/* Temporary, needed during the common clock framework conversion */
+#define __clk_get_name(clk)     (clk->name)
+#define __clk_get_parent(clk)   (clk->parent)
+#define __clk_get_rate(clk)     (clk->rate)
+/**
+ * struct clkops - some clock function pointers
+ * @enable: fn ptr that enables the current clock in hardware
+ * @disable: fn ptr that enables the current clock in hardware
+ * @find_idlest: function returning the IDLEST register for the clock's IP blk
+ * @find_companion: function returning the "companion" clk reg for the clock
+ * @allow_idle: fn ptr that enables autoidle for the current clock in hardware
+ * @deny_idle: fn ptr that disables autoidle for the current clock in hardware
+ *
+ * A "companion" clk is an accompanying clock to the one being queried
+ * that must be enabled for the IP module connected to the clock to
+ * become accessible by the hardware.  Neither @find_idlest nor
+ * @find_companion should be needed; that information is IP
+ * block-specific; the hwmod code has been created to handle this, but
+ * until hwmod data is ready and drivers have been converted to use PM
+ * runtime calls in place of clk_enable()/clk_disable(), @find_idlest and
+ * @find_companion must, unfortunately, remain.
+ */
+struct clkops {
+        int                     (*enable)(struct clk *);
+        void                    (*disable)(struct clk *);
+        void                    (*find_idlest)(struct clk *, void __iomem **,
+                                               u8 *, u8 *);
+        void                    (*find_companion)(struct clk *, void __iomem **,
+                                                  u8 *);
+        void                    (*allow_idle)(struct clk *);
+        void                    (*deny_idle)(struct clk *);
+};
+/*
+ * struct clk.flags possibilities
+ *
+ * XXX document the rest of the clock flags here
+ *
+ * CLOCK_CLKOUTX2: (OMAP4 only) DPLL CLKOUT and CLKOUTX2 GATE_CTRL
+ *     bits share the same register.  This flag allows the
+ *     omap4_dpllmx*() code to determine which GATE_CTRL bit field
+ *     should be used.  This is a temporary solution - a better approach
+ *     would be to associate clock type-specific data with the clock,
+ *     similar to the struct dpll_data approach.
+ */
+#define ENABLE_REG_32BIT        (1 << 0)        /* Use 32-bit access */
+#define CLOCK_IDLE_CONTROL      (1 << 1)
+#define CLOCK_NO_IDLE_PARENT    (1 << 2)
+#define ENABLE_ON_INIT          (1 << 3)        /* Enable upon framework init */
+#define INVERT_ENABLE           (1 << 4)        /* 0 enables, 1 disables */
+#define CLOCK_CLKOUTX2          (1 << 5)
+/**
+ * struct clk - OMAP struct clk
+ * @node: list_head connecting this clock into the full clock list
+ * @ops: struct clkops * for this clock
+ * @name: the name of the clock in the hardware (used in hwmod data and debug)
+ * @parent: pointer to this clock's parent struct clk
+ * @children: list_head connecting to the child clks' @sibling list_heads
+ * @sibling: list_head connecting this clk to its parent clk's @children
+ * @rate: current clock rate
+ * @enable_reg: register to write to enable the clock (see @enable_bit)
+ * @recalc: fn ptr that returns the clock's current rate
+ * @set_rate: fn ptr that can change the clock's current rate
+ * @round_rate: fn ptr that can round the clock's current rate
+ * @init: fn ptr to do clock-specific initialization
+ * @enable_bit: bitshift to write to enable/disable the clock (see @enable_reg)
+ * @usecount: number of users that have requested this clock to be enabled
+ * @fixed_div: when > 0, this clock's rate is its parent's rate / @fixed_div
+ * @flags: see "struct clk.flags possibilities" above
+ * @rate_offset: bitshift for rate selection bitfield (OMAP1 only)
+ * @src_offset: bitshift for source selection bitfield (OMAP1 only)
+ *
+ * XXX @rate_offset, @src_offset should probably be removed and OMAP1
+ * clock code converted to use clksel.
+ *
+ * XXX @usecount is poorly named.  It should be "enable_count" or
+ * something similar.  "users" in the description refers to kernel
+ * code (core code or drivers) that have called clk_enable() and not
+ * yet called clk_disable(); the usecount of parent clocks is also
+ * incremented by the clock code when clk_enable() is called on child
+ * clocks and decremented by the clock code when clk_disable() is
+ * called on child clocks.
+ *
+ * XXX @clkdm, @usecount, @children, @sibling should be marked for
+ * internal use only.
+ *
+ * @children and @sibling are used to optimize parent-to-child clock
+ * tree traversals.  (child-to-parent traversals use @parent.)
+ *
+ * XXX The notion of the clock's current rate probably needs to be
+ * separated from the clock's target rate.
+ */
+struct clk {
+        struct list_head        node;
+        const struct clkops     *ops;
+        const char              *name;
+        struct clk              *parent;
+        struct list_head        children;
+        struct list_head        sibling;        /* node for children */
+        unsigned long           rate;
+        void __iomem            *enable_reg;
+        unsigned long           (*recalc)(struct clk *);
+        int                     (*set_rate)(struct clk *, unsigned long);
+        long                    (*round_rate)(struct clk *, unsigned long);
+        void                    (*init)(struct clk *);
+        u8                      enable_bit;
+        s8                      usecount;
+        u8                      fixed_div;
+        u8                      flags;
+        u8                      rate_offset;
+        u8                      src_offset;
+#if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS)
+        struct dentry           *dent;  /* For visible tree hierarchy */
+#endif
+};
+struct clk_functions {
+        int             (*clk_enable)(struct clk *clk);
+        void            (*clk_disable)(struct clk *clk);
+        long            (*clk_round_rate)(struct clk *clk, unsigned long rate);
+        int             (*clk_set_rate)(struct clk *clk, unsigned long rate);
+        int             (*clk_set_parent)(struct clk *clk, struct clk *parent);
+        void            (*clk_allow_idle)(struct clk *clk);
+        void            (*clk_deny_idle)(struct clk *clk);
+        void            (*clk_disable_unused)(struct clk *clk);
+};
+extern int mpurate;
+extern int clk_init(struct clk_functions *custom_clocks);
+extern void clk_preinit(struct clk *clk);
+extern int clk_register(struct clk *clk);
+extern void clk_reparent(struct clk *child, struct clk *parent);
+extern void clk_unregister(struct clk *clk);
+extern void propagate_rate(struct clk *clk);
+extern void recalculate_root_clocks(void);
+extern unsigned long followparent_recalc(struct clk *clk);
+extern void clk_enable_init_clocks(void);
+unsigned long omap_fixed_divisor_recalc(struct clk *clk);
+extern struct clk *omap_clk_get_by_name(const char *name);
+extern int omap_clk_enable_autoidle_all(void);
+extern int omap_clk_disable_autoidle_all(void);
+extern const struct clkops clkops_null;
+extern struct clk dummy_ck;
 int omap1_clk_init(void);
 void omap1_clk_late_init(void);
diff --git a/arch/arm/mach-omap1/clock_data.c b/arch/arm/mach-omap1/clock_data.c
index 9b45f4b0ee22..28aea55a412e 100644
--- a/arch/arm/mach-omap1/clock_data.c
+++ b/arch/arm/mach-omap1/clock_data.c
@@ -22,14 +22,13 @@
 #include <asm/mach-types.h>  /* for machine_is_* */
-#include <plat/clock.h>
+#include "soc.h"
-#include <plat/cpu.h>
-#include <plat/clkdev_omap.h>
-#include <plat/sram.h>  /* for omap_sram_reprogram_clock() */
 #include <mach/hardware.h>
 #include <mach/usb.h>   /* for OTG_BASE */
+#include "../plat-omap/sram.h"
 #include "iomap.h"
 #include "clock.h"
@@ -765,14 +764,6 @@ static struct omap_clk omap_clks[] = {
 * init
 */
-static struct clk_functions omap1_clk_functions = {
-        .clk_enable             = omap1_clk_enable,
-        .clk_disable            = omap1_clk_disable,
-        .clk_round_rate         = omap1_clk_round_rate,
-        .clk_set_rate           = omap1_clk_set_rate,
-        .clk_disable_unused     = omap1_clk_disable_unused,
-};
 static void __init omap1_show_rates(void)
 {
        pr_notice("Clocking rate (xtal/DPLL1/MPU): %ld.%01ld/%ld.%01ld/%ld.%01ld MHz\n",
@@ -803,8 +794,6 @@ int __init omap1_clk_init(void)
        if (!cpu_is_omap15xx())
                omap_writew(0, SOFT_REQ_REG2);
-        clk_init(&omap1_clk_functions);
        /* By default all idlect1 clocks are allowed to idle */
        arm_idlect1_mask = ~0;
diff --git a/arch/arm/mach-omap1/common.h b/arch/arm/mach-omap1/common.h
index c2552b24f9f2..26e19d3b7924 100644
--- a/arch/arm/mach-omap1/common.h
+++ b/arch/arm/mach-omap1/common.h
@@ -26,8 +26,11 @@
 #ifndef __ARCH_ARM_MACH_OMAP1_COMMON_H
 #define __ARCH_ARM_MACH_OMAP1_COMMON_H
-#include <plat/common.h>
+#include "../plat-omap/common.h"
 #include <linux/mtd/mtd.h>
+#include <linux/i2c-omap.h>
+#include "../plat-omap/i2c.h"
 #if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
 void omap7xx_map_io(void);
@@ -38,6 +41,7 @@ static inline void omap7xx_map_io(void)
 #endif
 #ifdef CONFIG_ARCH_OMAP15XX
+void omap1510_fpga_init_irq(void);
 void omap15xx_map_io(void);
 #else
 static inline void omap15xx_map_io(void)
diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c
index d3fec92c54cb..645668e2b1d5 100644
--- a/arch/arm/mach-omap1/devices.c
+++ b/arch/arm/mach-omap1/devices.c
@@ -19,17 +19,19 @@
 #include <asm/mach/map.h>
-#include <plat/tc.h>
+#include <mach/tc.h>
 #include <mach/mux.h>
-#include <plat/dma.h>
-#include <plat/mmc.h>
 #include <mach/omap7xx.h>
 #include <mach/camera.h>
 #include <mach/hardware.h>
+#include "../plat-omap/sram.h"
 #include "common.h"
 #include "clock.h"
+#include "dma.h"
+#include "mmc.h"
 #if defined(CONFIG_SND_SOC) || defined(CONFIG_SND_SOC_MODULE)
@@ -175,6 +177,13 @@ static int __init omap_mmc_add(const char *name, int id, unsigned long base,
        res[3].name = "tx";
        res[3].flags = IORESOURCE_DMA;
+        if (cpu_is_omap7xx())
+                data->slots[0].features = MMC_OMAP7XX;
+        if (cpu_is_omap15xx())
+                data->slots[0].features = MMC_OMAP15XX;
+        if (cpu_is_omap16xx())
+                data->slots[0].features = MMC_OMAP16XX;
        ret = platform_device_add_resources(pdev, res, ARRAY_SIZE(res));
        if (ret == 0)
                ret = platform_device_add_data(pdev, data, sizeof(*data));
diff --git a/arch/arm/mach-omap1/dma.c b/arch/arm/mach-omap1/dma.c
index 29007fef84cd..71305c15fbd5 100644
--- a/arch/arm/mach-omap1/dma.c
+++ b/arch/arm/mach-omap1/dma.c
@@ -25,11 +25,13 @@
 #include <linux/device.h>
 #include <linux/io.h>
-#include <plat/dma.h>
+#include <plat-omap/dma-omap.h>
-#include <plat/tc.h>
+#include <mach/tc.h>
 #include <mach/irqs.h>
+#include "dma.h"
 #define OMAP1_DMA_BASE                  (0xfffed800)
 #define OMAP1_LOGICAL_DMA_CH_COUNT      17
 #define OMAP1_DMA_STRIDE                0x40
diff --git a/arch/arm/mach-omap1/dma.h b/arch/arm/mach-omap1/dma.h
new file mode 100644
index 000000000000..da6345dab03f
--- /dev/null
+++ b/arch/arm/mach-omap1/dma.h
@@ -0,0 +1,83 @@
+/*
+ *  OMAP1 DMA channel definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef __OMAP1_DMA_CHANNEL_H
+#define __OMAP1_DMA_CHANNEL_H
+/* DMA channels for omap1 */
+#define OMAP_DMA_NO_DEVICE              0
+#define OMAP_DMA_MCSI1_TX               1
+#define OMAP_DMA_MCSI1_RX               2
+#define OMAP_DMA_I2C_RX                 3
+#define OMAP_DMA_I2C_TX                 4
+#define OMAP_DMA_EXT_NDMA_REQ           5
+#define OMAP_DMA_EXT_NDMA_REQ2          6
+#define OMAP_DMA_UWIRE_TX               7
+#define OMAP_DMA_MCBSP1_TX              8
+#define OMAP_DMA_MCBSP1_RX              9
+#define OMAP_DMA_MCBSP3_TX              10
+#define OMAP_DMA_MCBSP3_RX              11
+#define OMAP_DMA_UART1_TX               12
+#define OMAP_DMA_UART1_RX               13
+#define OMAP_DMA_UART2_TX               14
+#define OMAP_DMA_UART2_RX               15
+#define OMAP_DMA_MCBSP2_TX              16
+#define OMAP_DMA_MCBSP2_RX              17
+#define OMAP_DMA_UART3_TX               18
+#define OMAP_DMA_UART3_RX               19
+#define OMAP_DMA_CAMERA_IF_RX           20
+#define OMAP_DMA_MMC_TX                 21
+#define OMAP_DMA_MMC_RX                 22
+#define OMAP_DMA_NAND                   23
+#define OMAP_DMA_IRQ_LCD_LINE           24
+#define OMAP_DMA_MEMORY_STICK           25
+#define OMAP_DMA_USB_W2FC_RX0           26
+#define OMAP_DMA_USB_W2FC_RX1           27
+#define OMAP_DMA_USB_W2FC_RX2           28
+#define OMAP_DMA_USB_W2FC_TX0           29
+#define OMAP_DMA_USB_W2FC_TX1           30
+#define OMAP_DMA_USB_W2FC_TX2           31
+/* These are only for 1610 */
+#define OMAP_DMA_CRYPTO_DES_IN          32
+#define OMAP_DMA_SPI_TX                 33
+#define OMAP_DMA_SPI_RX                 34
+#define OMAP_DMA_CRYPTO_HASH            35
+#define OMAP_DMA_CCP_ATTN               36
+#define OMAP_DMA_CCP_FIFO_NOT_EMPTY     37
+#define OMAP_DMA_CMT_APE_TX_CHAN_0      38
+#define OMAP_DMA_CMT_APE_RV_CHAN_0      39
+#define OMAP_DMA_CMT_APE_TX_CHAN_1      40
+#define OMAP_DMA_CMT_APE_RV_CHAN_1      41
+#define OMAP_DMA_CMT_APE_TX_CHAN_2      42
+#define OMAP_DMA_CMT_APE_RV_CHAN_2      43
+#define OMAP_DMA_CMT_APE_TX_CHAN_3      44
+#define OMAP_DMA_CMT_APE_RV_CHAN_3      45
+#define OMAP_DMA_CMT_APE_TX_CHAN_4      46
+#define OMAP_DMA_CMT_APE_RV_CHAN_4      47
+#define OMAP_DMA_CMT_APE_TX_CHAN_5      48
+#define OMAP_DMA_CMT_APE_RV_CHAN_5      49
+#define OMAP_DMA_CMT_APE_TX_CHAN_6      50
+#define OMAP_DMA_CMT_APE_RV_CHAN_6      51
+#define OMAP_DMA_CMT_APE_TX_CHAN_7      52
+#define OMAP_DMA_CMT_APE_RV_CHAN_7      53
+#define OMAP_DMA_MMC2_TX                54
+#define OMAP_DMA_MMC2_RX                55
+#define OMAP_DMA_CRYPTO_DES_OUT         56
+#endif /* __OMAP1_DMA_CHANNEL_H */
diff --git a/arch/arm/mach-omap1/flash.c b/arch/arm/mach-omap1/flash.c
index 73ae6169aa4a..b3fb531af94e 100644
--- a/arch/arm/mach-omap1/flash.c
+++ b/arch/arm/mach-omap1/flash.c
@@ -10,7 +10,7 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/map.h>
-#include <plat/tc.h>
+#include <mach/tc.h>
 #include <mach/flash.h>
 #include <mach/hardware.h>
diff --git a/arch/arm/mach-omap1/fpga.c b/arch/arm/mach-omap1/fpga.c
index 29ec50fc688d..4ec220d8da5c 100644
--- a/arch/arm/mach-omap1/fpga.c
+++ b/arch/arm/mach-omap1/fpga.c
@@ -27,7 +27,7 @@
 #include <asm/irq.h>
 #include <asm/mach/irq.h>
-#include <plat/fpga.h>
+#include <../plat-omap/fpga.h>
 #include <mach/hardware.h>
diff --git a/arch/arm/mach-omap1/i2c.c b/arch/arm/mach-omap1/i2c.c
index a0551a6d7451..32bcbb8d6c73 100644
--- a/arch/arm/mach-omap1/i2c.c
+++ b/arch/arm/mach-omap1/i2c.c
@@ -19,11 +19,25 @@
 *
 */
-#include <plat/i2c.h>
+#include <linux/i2c-omap.h>
 #include <mach/mux.h>
-#include <plat/cpu.h>
+#include "soc.h"
-void __init omap1_i2c_mux_pins(int bus_id)
+#include "../plat-omap/i2c.h"
+#define OMAP_I2C_SIZE           0x3f
+#define OMAP1_I2C_BASE          0xfffb3800
+#define OMAP1_INT_I2C           (32 + 4)
+static const char name[] = "omap_i2c";
+static struct resource i2c_resources[2] = {
+};
+static struct platform_device omap_i2c_devices[1] = {
+};
+static void __init omap1_i2c_mux_pins(int bus_id)
 {
        if (cpu_is_omap7xx()) {
                omap_cfg_reg(I2C_7XX_SDA);
@@ -33,3 +47,44 @@ void __init omap1_i2c_mux_pins(int bus_id)
                omap_cfg_reg(I2C_SCL);
        }
 }
+int __init omap_i2c_add_bus(struct omap_i2c_bus_platform_data *pdata,
+                                int bus_id)
+{
+        struct platform_device *pdev;
+        struct resource *res;
+        omap1_i2c_mux_pins(bus_id);
+        pdev = &omap_i2c_devices[bus_id - 1];
+        pdev->id = bus_id;
+        pdev->name = name;
+        pdev->num_resources = ARRAY_SIZE(i2c_resources);
+        res = i2c_resources;
+        res[0].start = OMAP1_I2C_BASE;
+        res[0].end = res[0].start + OMAP_I2C_SIZE;
+        res[0].flags = IORESOURCE_MEM;
+        res[1].start = OMAP1_INT_I2C;
+        res[1].flags = IORESOURCE_IRQ;
+        pdev->resource = res;
+        /* all OMAP1 have IP version 1 register set */
+        pdata->rev = OMAP_I2C_IP_VERSION_1;
+        /* all OMAP1 I2C are implemented like this */
+        pdata->flags = OMAP_I2C_FLAG_NO_FIFO |
+                       OMAP_I2C_FLAG_SIMPLE_CLOCK |
+                       OMAP_I2C_FLAG_16BIT_DATA_REG |
+                       OMAP_I2C_FLAG_ALWAYS_ARMXOR_CLK;
+        /* how the cpu bus is wired up differs for 7xx only */
+        if (cpu_is_omap7xx())
+                pdata->flags |= OMAP_I2C_FLAG_BUS_SHIFT_1;
+        else
+                pdata->flags |= OMAP_I2C_FLAG_BUS_SHIFT_2;
+        pdev->dev.platform_data = pdata;
+        return platform_device_register(pdev);
+}
diff --git a/arch/arm/mach-omap1/id.c b/arch/arm/mach-omap1/id.c
index a1b846aacdaf..52de382fc804 100644
--- a/arch/arm/mach-omap1/id.c
+++ b/arch/arm/mach-omap1/id.c
@@ -17,7 +17,7 @@
 #include <linux/io.h>
 #include <asm/system_info.h>
-#include <plat/cpu.h>
+#include "soc.h"
 #include <mach/hardware.h>
diff --git a/arch/arm/mach-omap1/include/mach/hardware.h b/arch/arm/mach-omap1/include/mach/hardware.h
index 84248d250adb..f9989d38c464 100644
--- a/arch/arm/mach-omap1/include/mach/hardware.h
+++ b/arch/arm/mach-omap1/include/mach/hardware.h
@@ -39,7 +39,7 @@
 #include <asm/sizes.h>
 #ifndef __ASSEMBLER__
 #include <asm/types.h>
-#include <plat/cpu.h>
+#include "../../mach-omap1/soc.h"
 /*
 * NOTE: Please use ioremap + __raw_read/write where possible instead of these
@@ -51,7 +51,7 @@ extern void omap_writeb(u8 v, u32 pa);
 extern void omap_writew(u16 v, u32 pa);
 extern void omap_writel(u32 v, u32 pa);
-#include <plat/tc.h>
+#include <mach/tc.h>
 /* Almost all documentation for chip and board memory maps assumes
 * BM is clear.  Most devel boards have a switch to control booting
diff --git a/arch/arm/mach-omap1/include/mach/memory.h b/arch/arm/mach-omap1/include/mach/memory.h
index 901082def9bd..351ae4f2c514 100644
--- a/arch/arm/mach-omap1/include/mach/memory.h
+++ b/arch/arm/mach-omap1/include/mach/memory.h
@@ -19,7 +19,7 @@
 * because of the strncmp().
 */
 #if defined(CONFIG_ARCH_OMAP15XX) && !defined(__ASSEMBLER__)
-#include <plat/cpu.h>
+#include "../../mach-omap1/soc.h"
 /*
 * OMAP-1510 Local Bus address offset
diff --git a/arch/arm/mach-omap1/include/mach/omap1510.h b/arch/arm/mach-omap1/include/mach/omap1510.h
index 8fe05d6137c0..3d235244bf5c 100644
--- a/arch/arm/mach-omap1/include/mach/omap1510.h
+++ b/arch/arm/mach-omap1/include/mach/omap1510.h
@@ -45,5 +45,118 @@
 #define OMAP1510_DSP_MMU_BASE   (0xfffed200)
+/*
+ * ---------------------------------------------------------------------------
+ *  OMAP-1510 FPGA
+ * ---------------------------------------------------------------------------
+ */
+#define OMAP1510_FPGA_BASE              0xE8000000              /* VA */
+#define OMAP1510_FPGA_SIZE              SZ_4K
+#define OMAP1510_FPGA_START             0x08000000              /* PA */
+/* Revision */
+#define OMAP1510_FPGA_REV_LOW                   IOMEM(OMAP1510_FPGA_BASE + 0x0)
+#define OMAP1510_FPGA_REV_HIGH                  IOMEM(OMAP1510_FPGA_BASE + 0x1)
+#define OMAP1510_FPGA_LCD_PANEL_CONTROL         IOMEM(OMAP1510_FPGA_BASE + 0x2)
+#define OMAP1510_FPGA_LED_DIGIT                 IOMEM(OMAP1510_FPGA_BASE + 0x3)
+#define INNOVATOR_FPGA_HID_SPI                  IOMEM(OMAP1510_FPGA_BASE + 0x4)
+#define OMAP1510_FPGA_POWER                     IOMEM(OMAP1510_FPGA_BASE + 0x5)
+/* Interrupt status */
+#define OMAP1510_FPGA_ISR_LO                    IOMEM(OMAP1510_FPGA_BASE + 0x6)
+#define OMAP1510_FPGA_ISR_HI                    IOMEM(OMAP1510_FPGA_BASE + 0x7)
+/* Interrupt mask */
+#define OMAP1510_FPGA_IMR_LO                    IOMEM(OMAP1510_FPGA_BASE + 0x8)
+#define OMAP1510_FPGA_IMR_HI                    IOMEM(OMAP1510_FPGA_BASE + 0x9)
+/* Reset registers */
+#define OMAP1510_FPGA_HOST_RESET                IOMEM(OMAP1510_FPGA_BASE + 0xa)
+#define OMAP1510_FPGA_RST                       IOMEM(OMAP1510_FPGA_BASE + 0xb)
+#define OMAP1510_FPGA_AUDIO                     IOMEM(OMAP1510_FPGA_BASE + 0xc)
+#define OMAP1510_FPGA_DIP                       IOMEM(OMAP1510_FPGA_BASE + 0xe)
+#define OMAP1510_FPGA_FPGA_IO                   IOMEM(OMAP1510_FPGA_BASE + 0xf)
+#define OMAP1510_FPGA_UART1                     IOMEM(OMAP1510_FPGA_BASE + 0x14)
+#define OMAP1510_FPGA_UART2                     IOMEM(OMAP1510_FPGA_BASE + 0x15)
+#define OMAP1510_FPGA_OMAP1510_STATUS           IOMEM(OMAP1510_FPGA_BASE + 0x16)
+#define OMAP1510_FPGA_BOARD_REV                 IOMEM(OMAP1510_FPGA_BASE + 0x18)
+#define INNOVATOR_FPGA_CAM_USB_CONTROL          IOMEM(OMAP1510_FPGA_BASE + 0x20c)
+#define OMAP1510P1_PPT_DATA                     IOMEM(OMAP1510_FPGA_BASE + 0x100)
+#define OMAP1510P1_PPT_STATUS                   IOMEM(OMAP1510_FPGA_BASE + 0x101)
+#define OMAP1510P1_PPT_CONTROL                  IOMEM(OMAP1510_FPGA_BASE + 0x102)
+#define OMAP1510_FPGA_TOUCHSCREEN               IOMEM(OMAP1510_FPGA_BASE + 0x204)
+#define INNOVATOR_FPGA_INFO                     IOMEM(OMAP1510_FPGA_BASE + 0x205)
+#define INNOVATOR_FPGA_LCD_BRIGHT_LO            IOMEM(OMAP1510_FPGA_BASE + 0x206)
+#define INNOVATOR_FPGA_LCD_BRIGHT_HI            IOMEM(OMAP1510_FPGA_BASE + 0x207)
+#define INNOVATOR_FPGA_LED_GRN_LO               IOMEM(OMAP1510_FPGA_BASE + 0x208)
+#define INNOVATOR_FPGA_LED_GRN_HI               IOMEM(OMAP1510_FPGA_BASE + 0x209)
+#define INNOVATOR_FPGA_LED_RED_LO               IOMEM(OMAP1510_FPGA_BASE + 0x20a)
+#define INNOVATOR_FPGA_LED_RED_HI               IOMEM(OMAP1510_FPGA_BASE + 0x20b)
+#define INNOVATOR_FPGA_EXP_CONTROL              IOMEM(OMAP1510_FPGA_BASE + 0x20d)
+#define INNOVATOR_FPGA_ISR2                     IOMEM(OMAP1510_FPGA_BASE + 0x20e)
+#define INNOVATOR_FPGA_IMR2                     IOMEM(OMAP1510_FPGA_BASE + 0x210)
+#define OMAP1510_FPGA_ETHR_START                (OMAP1510_FPGA_START + 0x300)
+/*
+ * Power up Giga UART driver, turn on HID clock.
+ * Turn off BT power, since we're not using it and it
+ * draws power.
+ */
+#define OMAP1510_FPGA_RESET_VALUE               0x42
+#define OMAP1510_FPGA_PCR_IF_PD0                (1 << 7)
+#define OMAP1510_FPGA_PCR_COM2_EN               (1 << 6)
+#define OMAP1510_FPGA_PCR_COM1_EN               (1 << 5)
+#define OMAP1510_FPGA_PCR_EXP_PD0               (1 << 4)
+#define OMAP1510_FPGA_PCR_EXP_PD1               (1 << 3)
+#define OMAP1510_FPGA_PCR_48MHZ_CLK             (1 << 2)
+#define OMAP1510_FPGA_PCR_4MHZ_CLK              (1 << 1)
+#define OMAP1510_FPGA_PCR_RSRVD_BIT0            (1 << 0)
+/*
+ * Innovator/OMAP1510 FPGA HID register bit definitions
+ */
+#define OMAP1510_FPGA_HID_SCLK  (1<<0)  /* output */
+#define OMAP1510_FPGA_HID_MOSI  (1<<1)  /* output */
+#define OMAP1510_FPGA_HID_nSS   (1<<2)  /* output 0/1 chip idle/select */
+#define OMAP1510_FPGA_HID_nHSUS (1<<3)  /* output 0/1 host active/suspended */
+#define OMAP1510_FPGA_HID_MISO  (1<<4)  /* input */
+#define OMAP1510_FPGA_HID_ATN   (1<<5)  /* input  0/1 chip idle/ATN */
+#define OMAP1510_FPGA_HID_rsrvd (1<<6)
+#define OMAP1510_FPGA_HID_RESETn (1<<7) /* output - 0/1 USAR reset/run */
+/* The FPGA IRQ is cascaded through GPIO_13 */
+#define OMAP1510_INT_FPGA               (IH_GPIO_BASE + 13)
+/* IRQ Numbers for interrupts muxed through the FPGA */
+#define OMAP1510_INT_FPGA_ATN           (OMAP_FPGA_IRQ_BASE + 0)
+#define OMAP1510_INT_FPGA_ACK           (OMAP_FPGA_IRQ_BASE + 1)
+#define OMAP1510_INT_FPGA2              (OMAP_FPGA_IRQ_BASE + 2)
+#define OMAP1510_INT_FPGA3              (OMAP_FPGA_IRQ_BASE + 3)
+#define OMAP1510_INT_FPGA4              (OMAP_FPGA_IRQ_BASE + 4)
+#define OMAP1510_INT_FPGA5              (OMAP_FPGA_IRQ_BASE + 5)
+#define OMAP1510_INT_FPGA6              (OMAP_FPGA_IRQ_BASE + 6)
+#define OMAP1510_INT_FPGA7              (OMAP_FPGA_IRQ_BASE + 7)
+#define OMAP1510_INT_FPGA8              (OMAP_FPGA_IRQ_BASE + 8)
+#define OMAP1510_INT_FPGA9              (OMAP_FPGA_IRQ_BASE + 9)
+#define OMAP1510_INT_FPGA10             (OMAP_FPGA_IRQ_BASE + 10)
+#define OMAP1510_INT_FPGA11             (OMAP_FPGA_IRQ_BASE + 11)
+#define OMAP1510_INT_FPGA12             (OMAP_FPGA_IRQ_BASE + 12)
+#define OMAP1510_INT_ETHER              (OMAP_FPGA_IRQ_BASE + 13)
+#define OMAP1510_INT_FPGAUART1          (OMAP_FPGA_IRQ_BASE + 14)
+#define OMAP1510_INT_FPGAUART2          (OMAP_FPGA_IRQ_BASE + 15)
+#define OMAP1510_INT_FPGA_TS            (OMAP_FPGA_IRQ_BASE + 16)
+#define OMAP1510_INT_FPGA17             (OMAP_FPGA_IRQ_BASE + 17)
+#define OMAP1510_INT_FPGA_CAM           (OMAP_FPGA_IRQ_BASE + 18)
+#define OMAP1510_INT_FPGA_RTC_A         (OMAP_FPGA_IRQ_BASE + 19)
+#define OMAP1510_INT_FPGA_RTC_B         (OMAP_FPGA_IRQ_BASE + 20)
+#define OMAP1510_INT_FPGA_CD            (OMAP_FPGA_IRQ_BASE + 21)
+#define OMAP1510_INT_FPGA22             (OMAP_FPGA_IRQ_BASE + 22)
+#define OMAP1510_INT_FPGA23             (OMAP_FPGA_IRQ_BASE + 23)
 #endif /*  __ASM_ARCH_OMAP15XX_H */
diff --git a/arch/arm/plat-omap/include/plat/tc.h b/arch/arm/mach-omap1/include/mach/tc.h
index 1b4b2da86203..1b4b2da86203 100644
--- a/arch/arm/plat-omap/include/plat/tc.h
+++ b/arch/arm/mach-omap1/include/mach/tc.h
diff --git a/arch/arm/mach-omap1/io.c b/arch/arm/mach-omap1/io.c
index 6a5baab1f4cb..44389d7cd255 100644
--- a/arch/arm/mach-omap1/io.c
+++ b/arch/arm/mach-omap1/io.c
@@ -17,8 +17,8 @@
 #include <asm/mach/map.h>
 #include <mach/mux.h>
-#include <plat/tc.h>
+#include <mach/tc.h>
-#include <plat/dma.h>
+#include <plat-omap/dma-omap.h>
 #include "iomap.h"
 #include "common.h"
diff --git a/arch/arm/mach-omap1/irq.c b/arch/arm/mach-omap1/irq.c
index 6995fb6a3345..122ef67939a2 100644
--- a/arch/arm/mach-omap1/irq.c
+++ b/arch/arm/mach-omap1/irq.c
@@ -45,7 +45,7 @@
 #include <asm/irq.h>
 #include <asm/mach/irq.h>
-#include <plat/cpu.h>
+#include "soc.h"
 #include <mach/hardware.h>
diff --git a/arch/arm/mach-omap1/lcd_dma.c b/arch/arm/mach-omap1/lcd_dma.c
index ed42628611bc..7ed8c1857d56 100644
--- a/arch/arm/mach-omap1/lcd_dma.c
+++ b/arch/arm/mach-omap1/lcd_dma.c
@@ -27,11 +27,13 @@
 #include <linux/interrupt.h>
 #include <linux/io.h>
-#include <plat/dma.h>
+#include <plat-omap/dma-omap.h>
 #include <mach/hardware.h>
 #include <mach/lcdc.h>
+#include "dma.h"
 int omap_lcd_dma_running(void)
 {
        /*
diff --git a/arch/arm/mach-omap1/mcbsp.c b/arch/arm/mach-omap1/mcbsp.c
index bdc2e7541adb..c6d8fdf92e9c 100644
--- a/arch/arm/mach-omap1/mcbsp.c
+++ b/arch/arm/mach-omap1/mcbsp.c
@@ -19,14 +19,15 @@
 #include <linux/platform_device.h>
 #include <linux/slab.h>
-#include <plat/dma.h>
+#include <plat-omap/dma-omap.h>
 #include <mach/mux.h>
-#include <plat/cpu.h>
+#include "soc.h"
 #include <linux/platform_data/asoc-ti-mcbsp.h>
 #include <mach/irqs.h>
 #include "iomap.h"
+#include "dma.h"
 #define DPS_RSTCT2_PER_EN       (1 << 0)
 #define DSP_RSTCT2_WD_PER_EN    (1 << 1)
diff --git a/arch/arm/mach-omap1/mmc.h b/arch/arm/mach-omap1/mmc.h
new file mode 100644
index 000000000000..39c2b13de884
--- /dev/null
+++ b/arch/arm/mach-omap1/mmc.h
@@ -0,0 +1,18 @@
+#include <linux/mmc/host.h>
+#include <linux/platform_data/mmc-omap.h>
+#define OMAP15XX_NR_MMC         1
+#define OMAP16XX_NR_MMC         2
+#define OMAP1_MMC_SIZE          0x080
+#define OMAP1_MMC1_BASE         0xfffb7800
+#define OMAP1_MMC2_BASE         0xfffb7c00      /* omap16xx only */
+#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
+void omap1_init_mmc(struct omap_mmc_platform_data **mmc_data,
+                                int nr_controllers);
+#else
+static inline void omap1_init_mmc(struct omap_mmc_platform_data **mmc_data,
+                                int nr_controllers)
+{
+}
+#endif
diff --git a/arch/arm/mach-omap1/opp_data.c b/arch/arm/mach-omap1/opp_data.c
index 9cd4ddb51397..8dcebe6d8882 100644
--- a/arch/arm/mach-omap1/opp_data.c
+++ b/arch/arm/mach-omap1/opp_data.c
@@ -10,7 +10,7 @@
 * published by the Free Software Foundation.
 */
-#include <plat/clkdev_omap.h>
+#include "clock.h"
 #include "opp.h"
 /*-------------------------------------------------------------------------
diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c
index 47ec16155483..b2c2328d7c18 100644
--- a/arch/arm/mach-omap1/pm.c
+++ b/arch/arm/mach-omap1/pm.c
@@ -49,17 +49,17 @@
 #include <asm/mach/time.h>
 #include <asm/mach/irq.h>
-#include <plat/cpu.h>
+#include <mach/tc.h>
-#include <plat/clock.h>
-#include <plat/sram.h>
-#include <plat/tc.h>
 #include <mach/mux.h>
-#include <plat/dma.h>
+#include <plat-omap/dma-omap.h>
 #include <plat/dmtimer.h>
 #include <mach/irqs.h>
+#include "../plat-omap/sram.h"
 #include "iomap.h"
+#include "clock.h"
 #include "pm.h"
 static unsigned int arm_sleep_save[ARM_SLEEP_SAVE_SIZE];
diff --git a/arch/arm/mach-omap1/pm_bus.c b/arch/arm/mach-omap1/pm_bus.c
index 7868e75ad077..16bf2f95117c 100644
--- a/arch/arm/mach-omap1/pm_bus.c
+++ b/arch/arm/mach-omap1/pm_bus.c
@@ -19,9 +19,6 @@
 #include <linux/clk.h>
 #include <linux/err.h>
-#include <plat/omap_device.h>
-#include <plat/omap-pm.h>
 #ifdef CONFIG_PM_RUNTIME
 static int omap1_pm_runtime_suspend(struct device *dev)
 {
diff --git a/arch/arm/mach-omap1/serial.c b/arch/arm/mach-omap1/serial.c
index b9d6834af835..d1ac08016f0b 100644
--- a/arch/arm/mach-omap1/serial.c
+++ b/arch/arm/mach-omap1/serial.c
@@ -23,7 +23,6 @@
 #include <asm/mach-types.h>
 #include <mach/mux.h>
-#include <plat/fpga.h>
 #include "pm.h"
diff --git a/arch/arm/mach-omap1/soc.h b/arch/arm/mach-omap1/soc.h
new file mode 100644
index 000000000000..6cf9c1cc2bef
--- /dev/null
+++ b/arch/arm/mach-omap1/soc.h
@@ -0,0 +1,229 @@
+/*
+ * OMAP cpu type detection
+ *
+ * Copyright (C) 2004, 2008 Nokia Corporation
+ *
+ * Copyright (C) 2009-11 Texas Instruments.
+ *
+ * Written by Tony Lindgren <tony.lindgren@nokia.com>
+ *
+ * Added OMAP4/5 specific defines - Santosh Shilimkar<santosh.shilimkar@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+#ifndef __ASM_ARCH_OMAP_CPU_H
+#define __ASM_ARCH_OMAP_CPU_H
+#ifndef __ASSEMBLY__
+#include <linux/bitops.h>
+/*
+ * Test if multicore OMAP support is needed
+ */
+#undef MULTI_OMAP1
+#undef OMAP_NAME
+#ifdef CONFIG_ARCH_OMAP730
+# ifdef OMAP_NAME
+#  undef  MULTI_OMAP1
+#  define MULTI_OMAP1
+# else
+#  define OMAP_NAME omap730
+# endif
+#endif
+#ifdef CONFIG_ARCH_OMAP850
+# ifdef OMAP_NAME
+#  undef  MULTI_OMAP1
+#  define MULTI_OMAP1
+# else
+#  define OMAP_NAME omap850
+# endif
+#endif
+#ifdef CONFIG_ARCH_OMAP15XX
+# ifdef OMAP_NAME
+#  undef  MULTI_OMAP1
+#  define MULTI_OMAP1
+# else
+#  define OMAP_NAME omap1510
+# endif
+#endif
+#ifdef CONFIG_ARCH_OMAP16XX
+# ifdef OMAP_NAME
+#  undef  MULTI_OMAP1
+#  define MULTI_OMAP1
+# else
+#  define OMAP_NAME omap16xx
+# endif
+#endif
+/*
+ * omap_rev bits:
+ * CPU id bits  (0730, 1510, 1710, 2422...)     [31:16]
+ * CPU revision (See _REV_ defined in cpu.h)    [15:08]
+ * CPU class bits (15xx, 16xx, 24xx, 34xx...)   [07:00]
+ */
+unsigned int omap_rev(void);
+/*
+ * Get the CPU revision for OMAP devices
+ */
+#define GET_OMAP_REVISION()     ((omap_rev() >> 8) & 0xff)
+/*
+ * Macros to group OMAP into cpu classes.
+ * These can be used in most places.
+ * cpu_is_omap7xx():    True for OMAP730, OMAP850
+ * cpu_is_omap15xx():   True for OMAP1510, OMAP5910 and OMAP310
+ * cpu_is_omap16xx():   True for OMAP1610, OMAP5912 and OMAP1710
+ */
+#define GET_OMAP_CLASS  (omap_rev() & 0xff)
+#define IS_OMAP_CLASS(class, id)                        \
+static inline int is_omap ##class (void)                \
+{                                                       \
+        return (GET_OMAP_CLASS == (id)) ? 1 : 0;        \
+}
+#define GET_OMAP_SUBCLASS       ((omap_rev() >> 20) & 0x0fff)
+#define IS_OMAP_SUBCLASS(subclass, id)                  \
+static inline int is_omap ##subclass (void)             \
+{                                                       \
+        return (GET_OMAP_SUBCLASS == (id)) ? 1 : 0;     \
+}
+IS_OMAP_CLASS(7xx, 0x07)
+IS_OMAP_CLASS(15xx, 0x15)
+IS_OMAP_CLASS(16xx, 0x16)
+#define cpu_is_omap7xx()                0
+#define cpu_is_omap15xx()               0
+#define cpu_is_omap16xx()               0
+#if defined(MULTI_OMAP1)
+# if defined(CONFIG_ARCH_OMAP730)
+#  undef  cpu_is_omap7xx
+#  define cpu_is_omap7xx()              is_omap7xx()
+# endif
+# if defined(CONFIG_ARCH_OMAP850)
+#  undef  cpu_is_omap7xx
+#  define cpu_is_omap7xx()              is_omap7xx()
+# endif
+# if defined(CONFIG_ARCH_OMAP15XX)
+#  undef  cpu_is_omap15xx
+#  define cpu_is_omap15xx()             is_omap15xx()
+# endif
+# if defined(CONFIG_ARCH_OMAP16XX)
+#  undef  cpu_is_omap16xx
+#  define cpu_is_omap16xx()             is_omap16xx()
+# endif
+#else
+# if defined(CONFIG_ARCH_OMAP730)
+#  undef  cpu_is_omap7xx
+#  define cpu_is_omap7xx()              1
+# endif
+# if defined(CONFIG_ARCH_OMAP850)
+#  undef  cpu_is_omap7xx
+#  define cpu_is_omap7xx()              1
+# endif
+# if defined(CONFIG_ARCH_OMAP15XX)
+#  undef  cpu_is_omap15xx
+#  define cpu_is_omap15xx()             1
+# endif
+# if defined(CONFIG_ARCH_OMAP16XX)
+#  undef  cpu_is_omap16xx
+#  define cpu_is_omap16xx()             1
+# endif
+#endif
+/*
+ * Macros to detect individual cpu types.
+ * These are only rarely needed.
+ * cpu_is_omap310():    True for OMAP310
+ * cpu_is_omap1510():   True for OMAP1510
+ * cpu_is_omap1610():   True for OMAP1610
+ * cpu_is_omap1611():   True for OMAP1611
+ * cpu_is_omap5912():   True for OMAP5912
+ * cpu_is_omap1621():   True for OMAP1621
+ * cpu_is_omap1710():   True for OMAP1710
+ */
+#define GET_OMAP_TYPE   ((omap_rev() >> 16) & 0xffff)
+#define IS_OMAP_TYPE(type, id)                          \
+static inline int is_omap ##type (void)                 \
+{                                                       \
+        return (GET_OMAP_TYPE == (id)) ? 1 : 0;         \
+}
+IS_OMAP_TYPE(310, 0x0310)
+IS_OMAP_TYPE(1510, 0x1510)
+IS_OMAP_TYPE(1610, 0x1610)
+IS_OMAP_TYPE(1611, 0x1611)
+IS_OMAP_TYPE(5912, 0x1611)
+IS_OMAP_TYPE(1621, 0x1621)
+IS_OMAP_TYPE(1710, 0x1710)
+#define cpu_is_omap310()                0
+#define cpu_is_omap1510()               0
+#define cpu_is_omap1610()               0
+#define cpu_is_omap5912()               0
+#define cpu_is_omap1611()               0
+#define cpu_is_omap1621()               0
+#define cpu_is_omap1710()               0
+/* These are needed to compile common code */
+#ifdef CONFIG_ARCH_OMAP1
+#define cpu_is_omap242x()               0
+#define cpu_is_omap2430()               0
+#define cpu_is_omap243x()               0
+#define cpu_is_omap24xx()               0
+#define cpu_is_omap34xx()               0
+#define cpu_is_omap44xx()               0
+#define soc_is_omap54xx()               0
+#define soc_is_am33xx()                 0
+#define cpu_class_is_omap1()            1
+#define cpu_class_is_omap2()            0
+#endif
+/*
+ * Whether we have MULTI_OMAP1 or not, we still need to distinguish
+ * between 310 vs. 1510 and 1611B/5912 vs. 1710.
+ */
+#if defined(CONFIG_ARCH_OMAP15XX)
+# undef  cpu_is_omap310
+# undef  cpu_is_omap1510
+# define cpu_is_omap310()               is_omap310()
+# define cpu_is_omap1510()              is_omap1510()
+#endif
+#if defined(CONFIG_ARCH_OMAP16XX)
+# undef  cpu_is_omap1610
+# undef  cpu_is_omap1611
+# undef  cpu_is_omap5912
+# undef  cpu_is_omap1621
+# undef  cpu_is_omap1710
+# define cpu_is_omap1610()              is_omap1610()
+# define cpu_is_omap1611()              is_omap1611()
+# define cpu_is_omap5912()              is_omap5912()
+# define cpu_is_omap1621()              is_omap1621()
+# define cpu_is_omap1710()              is_omap1710()
+#endif
+#endif  /* __ASSEMBLY__ */
+#endif
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index fe40d9e488c9..46d9071f0938 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -4,7 +4,8 @@
 # Common support
 obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer.o pm.o \
-         common.o gpio.o dma.o wd_timer.o display.o i2c.o hdq1w.o omap_hwmod.o
+         common.o gpio.o dma.o wd_timer.o display.o i2c.o hdq1w.o omap_hwmod.o \
+         omap_device.o
 # INTCPS IP block support - XXX should be moved to drivers/
 obj-$(CONFIG_ARCH_OMAP2)                += irq.o
diff --git a/arch/arm/mach-omap2/am35xx-emac.c b/arch/arm/mach-omap2/am35xx-emac.c
index d0c54c573d34..af11dcdb7e2c 100644
--- a/arch/arm/mach-omap2/am35xx-emac.c
+++ b/arch/arm/mach-omap2/am35xx-emac.c
@@ -18,7 +18,7 @@
 #include <linux/err.h>
 #include <linux/davinci_emac.h>
 #include <asm/system.h>
-#include <plat/omap_device.h>
+#include "omap_device.h"
 #include "am35xx.h"
 #include "control.h"
 #include "am35xx-emac.h"
diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c
index 95b384d54f8a..49e49d0b7cf5 100644
--- a/arch/arm/mach-omap2/board-2430sdp.c
+++ b/arch/arm/mach-omap2/board-2430sdp.c
@@ -34,7 +34,7 @@
 #include <asm/mach/map.h>
 #include "common.h"
-#include <plat/gpmc.h>
+#include "gpmc.h"
 #include <plat/usb.h>
 #include "gpmc-smc91x.h"
diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
index 96cd3693e1ae..d2a419fcfce3 100644
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -32,13 +32,14 @@
 #include <plat/usb.h>
 #include "common.h"
-#include <plat/dma.h>
+#include <plat-omap/dma-omap.h>
-#include <plat/gpmc.h>
 #include <video/omapdss.h>
 #include <video/omap-panel-tfp410.h>
+#include "gpmc.h"
 #include "gpmc-smc91x.h"
+#include "soc.h"
 #include "board-flash.h"
 #include "mux.h"
 #include "sdram-qimonda-hyb18m512160af-6.h"
diff --git a/arch/arm/mach-omap2/board-3630sdp.c b/arch/arm/mach-omap2/board-3630sdp.c
index fc224ad86747..f1df60102a65 100644
--- a/arch/arm/mach-omap2/board-3630sdp.c
+++ b/arch/arm/mach-omap2/board-3630sdp.c
@@ -20,7 +20,7 @@
 #include "gpmc-smc91x.h"
 #include <plat/usb.h>
-#include <mach/board-zoom.h>
+#include "board-zoom.h"
 #include "board-flash.h"
 #include "mux.h"
diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
index 3669c120c7e8..2ab267ec3b75 100644
--- a/arch/arm/mach-omap2/board-4430sdp.c
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@ -35,7 +35,6 @@
 #include "common.h"
 #include <plat/usb.h>
-#include <plat/mmc.h>
 #include "omap4-keypad.h"
 #include <video/omapdss.h>
 #include <video/omap-panel-nokia-dsi.h>
@@ -45,6 +44,7 @@
 #include "soc.h"
 #include "mux.h"
+#include "mmc.h"
 #include "hsmmc.h"
 #include "control.h"
 #include "common-board-devices.h"
diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c
index cea3abace815..64cf1bde0f3b 100644
--- a/arch/arm/mach-omap2/board-apollon.c
+++ b/arch/arm/mach-omap2/board-apollon.c
@@ -28,14 +28,14 @@
 #include <linux/clk.h>
 #include <linux/smc91x.h>
 #include <linux/gpio.h>
+#include <linux/platform_data/leds-omap.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
-#include <plat/led.h>
 #include "common.h"
-#include <plat/gpmc.h>
+#include "gpmc.h"
 #include <video/omapdss.h>
 #include <video/omap-panel-generic-dpi.h>
diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c
index 376d26eb601c..73e2ba9b343b 100644
--- a/arch/arm/mach-omap2/board-cm-t35.c
+++ b/arch/arm/mach-omap2/board-cm-t35.c
@@ -40,7 +40,7 @@
 #include "common.h"
 #include <linux/platform_data/mtd-nand-omap2.h>
-#include <plat/gpmc.h>
+#include "gpmc.h"
 #include <plat/usb.h>
 #include <video/omapdss.h>
 #include <video/omap-panel-generic-dpi.h>
@@ -53,6 +53,7 @@
 #include "sdram-micron-mt46h32m32lf-6.h"
 #include "hsmmc.h"
 #include "common-board-devices.h"
+#include "gpmc-nand.h"
 #define CM_T35_GPIO_PENDOWN             57
 #define SB_T35_USB_HUB_RESET_GPIO       167
@@ -181,7 +182,7 @@ static struct omap_nand_platform_data cm_t35_nand_data = {
 static void __init cm_t35_init_nand(void)
 {
-        if (gpmc_nand_init(&cm_t35_nand_data) < 0)
+        if (gpmc_nand_init(&cm_t35_nand_data, NULL) < 0)
                pr_err("CM-T35: Unable to register NAND device\n");
 }
 #else
diff --git a/arch/arm/mach-omap2/board-cm-t3517.c b/arch/arm/mach-omap2/board-cm-t3517.c
index 59c0a45f75b0..b5495e415024 100644
--- a/arch/arm/mach-omap2/board-cm-t3517.c
+++ b/arch/arm/mach-omap2/board-cm-t3517.c
@@ -41,7 +41,7 @@
 #include "common.h"
 #include <plat/usb.h>
 #include <linux/platform_data/mtd-nand-omap2.h>
-#include <plat/gpmc.h>
+#include "gpmc.h"
 #include "am35xx.h"
@@ -49,6 +49,7 @@
 #include "control.h"
 #include "common-board-devices.h"
 #include "am35xx-emac.h"
+#include "gpmc-nand.h"
 #if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
 static struct gpio_led cm_t3517_leds[] = {
@@ -240,7 +241,7 @@ static struct omap_nand_platform_data cm_t3517_nand_data = {
 static void __init cm_t3517_init_nand(void)
 {
-        if (gpmc_nand_init(&cm_t3517_nand_data) < 0)
+        if (gpmc_nand_init(&cm_t3517_nand_data, NULL) < 0)
                pr_err("CM-T3517: NAND initialization failed\n");
 }
 #else
diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c
index 1fd161e934c7..3eedb8fd0370 100644
--- a/arch/arm/mach-omap2/board-devkit8000.c
+++ b/arch/arm/mach-omap2/board-devkit8000.c
@@ -39,7 +39,7 @@
 #include <asm/mach/flash.h>
 #include "common.h"
-#include <plat/gpmc.h>
+#include "gpmc.h"
 #include <linux/platform_data/mtd-nand-omap2.h>
 #include <plat/usb.h>
 #include <video/omapdss.h>
@@ -55,8 +55,11 @@
 #include "sdram-micron-mt46h32m32lf-6.h"
 #include "mux.h"
 #include "hsmmc.h"
+#include "board-flash.h"
 #include "common-board-devices.h"
+#define NAND_CS                 0
 #define OMAP_DM9000_GPIO_IRQ    25
 #define OMAP3_DEVKIT_TS_GPIO    27
@@ -621,8 +624,9 @@ static void __init devkit8000_init(void)
        usb_musb_init(NULL);
        usbhs_init(&usbhs_bdata);
-        omap_nand_flash_init(NAND_BUSWIDTH_16, devkit8000_nand_partitions,
+        board_nand_init(devkit8000_nand_partitions,
-                             ARRAY_SIZE(devkit8000_nand_partitions));
+                        ARRAY_SIZE(devkit8000_nand_partitions), NAND_CS,
+                        NAND_BUSWIDTH_16, NULL);
        omap_twl4030_audio_init("omap3beagle");
        /* Ensure SDRC pins are mux'd for self-refresh */
diff --git a/arch/arm/mach-omap2/board-flash.c b/arch/arm/mach-omap2/board-flash.c
index e642acf9cad0..c33adea0247c 100644
--- a/arch/arm/mach-omap2/board-flash.c
+++ b/arch/arm/mach-omap2/board-flash.c
@@ -17,14 +17,14 @@
 #include <linux/mtd/physmap.h>
 #include <linux/io.h>
-#include <plat/cpu.h>
-#include <plat/gpmc.h>
 #include <linux/platform_data/mtd-nand-omap2.h>
 #include <linux/platform_data/mtd-onenand-omap2.h>
-#include <plat/tc.h>
+#include "soc.h"
 #include "common.h"
 #include "board-flash.h"
+#include "gpmc-onenand.h"
+#include "gpmc-nand.h"
 #define REG_FPGA_REV                    0x10
 #define REG_FPGA_DIP_SWITCH_INPUT2      0x60
@@ -104,36 +104,35 @@ __init board_onenand_init(struct mtd_partition *onenand_parts,
                defined(CONFIG_MTD_NAND_OMAP2_MODULE)
 /* Note that all values in this struct are in nanoseconds */
-static struct gpmc_timings nand_timings = {
+struct gpmc_timings nand_default_timings[1] = {
+        {
+                .sync_clk = 0,
-        .sync_clk = 0,
+                .cs_on = 0,
+                .cs_rd_off = 36,
+                .cs_wr_off = 36,
-        .cs_on = 0,
+                .adv_on = 6,
-        .cs_rd_off = 36,
+                .adv_rd_off = 24,
-        .cs_wr_off = 36,
+                .adv_wr_off = 36,
-        .adv_on = 6,
+                .we_off = 30,
-        .adv_rd_off = 24,
+                .oe_off = 48,
-        .adv_wr_off = 36,
-        .we_off = 30,
+                .access = 54,
-        .oe_off = 48,
+                .rd_cycle = 72,
+                .wr_cycle = 72,
-        .access = 54,
+                .wr_access = 30,
-        .rd_cycle = 72,
+                .wr_data_mux_bus = 0,
-        .wr_cycle = 72,
+        },
-        .wr_access = 30,
-        .wr_data_mux_bus = 0,
 };
-static struct omap_nand_platform_data board_nand_data = {
+static struct omap_nand_platform_data board_nand_data;
-        .gpmc_t         = &nand_timings,
-};
 void
-__init board_nand_init(struct mtd_partition *nand_parts,
+__init board_nand_init(struct mtd_partition *nand_parts, u8 nr_parts, u8 cs,
-                        u8 nr_parts, u8 cs, int nand_type)
+                                int nand_type, struct gpmc_timings *gpmc_t)
 {
        board_nand_data.cs              = cs;
        board_nand_data.parts           = nand_parts;
@@ -141,7 +140,7 @@ __init board_nand_init(struct mtd_partition *nand_parts,
        board_nand_data.devsize         = nand_type;
        board_nand_data.ecc_opt = OMAP_ECC_HAMMING_CODE_DEFAULT;
-        gpmc_nand_init(&board_nand_data);
+        gpmc_nand_init(&board_nand_data, gpmc_t);
 }
 #endif /* CONFIG_MTD_NAND_OMAP2 || CONFIG_MTD_NAND_OMAP2_MODULE */
@@ -238,5 +237,6 @@ void __init board_flash_init(struct flash_partitions partition_info[],
                pr_err("NAND: Unable to find configuration in GPMC\n");
        else
                board_nand_init(partition_info[2].parts,
-                        partition_info[2].nr_parts, nandcs, nand_type);
+                        partition_info[2].nr_parts, nandcs,
+                        nand_type, nand_default_timings);
 }
diff --git a/arch/arm/mach-omap2/board-flash.h b/arch/arm/mach-omap2/board-flash.h
index c44b70d52021..2fb5d41a9fae 100644
--- a/arch/arm/mach-omap2/board-flash.h
+++ b/arch/arm/mach-omap2/board-flash.h
@@ -12,7 +12,7 @@
 */
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
-#include <plat/gpmc.h>
+#include "gpmc.h"
 #define PDC_NOR         1
 #define PDC_NAND        2
@@ -40,12 +40,14 @@ static inline void board_flash_init(struct flash_partitions part[],
 #if defined(CONFIG_MTD_NAND_OMAP2) || \
                defined(CONFIG_MTD_NAND_OMAP2_MODULE)
 extern void board_nand_init(struct mtd_partition *nand_parts,
-                                        u8 nr_parts, u8 cs, int nand_type);
+                u8 nr_parts, u8 cs, int nand_type, struct gpmc_timings *gpmc_t);
+extern struct gpmc_timings nand_default_timings[];
 #else
 static inline void board_nand_init(struct mtd_partition *nand_parts,
-                                        u8 nr_parts, u8 cs, int nand_type)
+                u8 nr_parts, u8 cs, int nand_type, struct gpmc_timings *gpmc_t)
 {
 }
+#define nand_default_timings    NULL
 #endif
 #if defined(CONFIG_MTD_ONENAND_OMAP2) || \
diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c
index 8d04bf851af4..366ebd93ae24 100644
--- a/arch/arm/mach-omap2/board-h4.c
+++ b/arch/arm/mach-omap2/board-h4.c
@@ -32,8 +32,7 @@
 #include <asm/mach/map.h>
 #include <plat/menelaus.h>
-#include <plat/dma.h>
+#include <plat-omap/dma-omap.h>
-#include <plat/gpmc.h>
 #include "debug-devices.h"
 #include <video/omapdss.h>
@@ -42,6 +41,7 @@
 #include "common.h"
 #include "mux.h"
 #include "control.h"
+#include "gpmc.h"
 #define H4_FLASH_CS     0
 #define H4_SMC91X_CS    1
diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c
index 48d5e41dfbfa..9a9a9b5f78b6 100644
--- a/arch/arm/mach-omap2/board-igep0020.c
+++ b/arch/arm/mach-omap2/board-igep0020.c
@@ -30,7 +30,7 @@
 #include <asm/mach/arch.h>
 #include "common.h"
-#include <plat/gpmc.h>
+#include "gpmc.h"
 #include <plat/usb.h>
 #include <video/omapdss.h>
@@ -43,6 +43,7 @@
 #include "common-board-devices.h"
 #include "board-flash.h"
 #include "control.h"
+#include "gpmc-onenand.h"
 #define IGEP2_SMSC911X_CS       5
 #define IGEP2_SMSC911X_GPIO     176
@@ -175,7 +176,7 @@ static void __init igep_flash_init(void)
                pr_info("IGEP: initializing NAND memory device\n");
                board_nand_init(igep_flash_partitions,
                                ARRAY_SIZE(igep_flash_partitions),
-                                0, NAND_BUSWIDTH_16);
+                                0, NAND_BUSWIDTH_16, nand_default_timings);
        } else if (mux == IGEP_SYSBOOT_ONENAND) {
                pr_info("IGEP: initializing OneNAND memory device\n");
                board_onenand_init(igep_flash_partitions,
diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
index ee8c3cfb95b3..35ee018d9289 100644
--- a/arch/arm/mach-omap2/board-ldp.c
+++ b/arch/arm/mach-omap2/board-ldp.c
@@ -35,8 +35,8 @@
 #include <asm/mach/map.h>
 #include "common.h"
-#include <plat/gpmc.h>
+#include "gpmc.h"
-#include <mach/board-zoom.h>
+#include "board-zoom.h"
 #include <plat/usb.h>
 #include "gpmc-smsc911x.h"
@@ -420,8 +420,8 @@ static void __init omap_ldp_init(void)
        omap_serial_init();
        omap_sdrc_init(NULL, NULL);
        usb_musb_init(NULL);
-        board_nand_init(ldp_nand_partitions,
+        board_nand_init(ldp_nand_partitions, ARRAY_SIZE(ldp_nand_partitions),
-                ARRAY_SIZE(ldp_nand_partitions), ZOOM_NAND_CS, 0);
+                        ZOOM_NAND_CS, 0, nand_default_timings);
        omap_hsmmc_init(mmc);
        ldp_display_init();
diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c
index d95f727ca39a..cea433b9b7b9 100644
--- a/arch/arm/mach-omap2/board-n8x0.c
+++ b/arch/arm/mach-omap2/board-n8x0.c
@@ -29,9 +29,10 @@
 #include "common.h"
 #include <plat/menelaus.h>
-#include <plat/mmc.h>
+#include "mmc.h"
 #include "mux.h"
+#include "gpmc-onenand.h"
 #define TUSB6010_ASYNC_CS       1
 #define TUSB6010_SYNC_CS        4
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 388c431c745a..a5497ce0a6c8 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -41,16 +41,20 @@
 #include "common.h"
 #include <video/omapdss.h>
 #include <video/omap-panel-tfp410.h>
-#include <plat/gpmc.h>
+#include "gpmc.h"
 #include <linux/platform_data/mtd-nand-omap2.h>
 #include <plat/usb.h>
-#include <plat/omap_device.h>
+#include "omap_device.h"
+#include "soc.h"
 #include "mux.h"
 #include "hsmmc.h"
 #include "pm.h"
+#include "board-flash.h"
 #include "common-board-devices.h"
+#define NAND_CS 0
 /*
 * OMAP3 Beagle revision
 * Run time detection of Beagle revision is done by reading GPIO.
@@ -512,8 +516,9 @@ static void __init omap3_beagle_init(void)
        usb_musb_init(NULL);
        usbhs_init(&usbhs_bdata);
-        omap_nand_flash_init(NAND_BUSWIDTH_16, omap3beagle_nand_partitions,
+        board_nand_init(omap3beagle_nand_partitions,
-                             ARRAY_SIZE(omap3beagle_nand_partitions));
+                        ARRAY_SIZE(omap3beagle_nand_partitions), NAND_CS,
+                        NAND_BUSWIDTH_16, NULL);
        omap_twl4030_audio_init("omap3beagle");
        /* Ensure msecure is mux'd to be able to set the RTC. */
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index b9b776b6c954..8479779fd346 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -52,10 +52,14 @@
 #include <video/omapdss.h>
 #include <video/omap-panel-tfp410.h>
+#include "soc.h"
 #include "mux.h"
 #include "sdram-micron-mt46h32m32lf-6.h"
 #include "hsmmc.h"
 #include "common-board-devices.h"
+#include "board-flash.h"
+#define NAND_CS                 0
 #define OMAP3_EVM_TS_GPIO       175
 #define OMAP3_EVM_EHCI_VBUS     22
@@ -731,8 +735,9 @@ static void __init omap3_evm_init(void)
        }
        usb_musb_init(&musb_board_data);
        usbhs_init(&usbhs_bdata);
-        omap_nand_flash_init(NAND_BUSWIDTH_16, omap3evm_nand_partitions,
+        board_nand_init(omap3evm_nand_partitions,
-                             ARRAY_SIZE(omap3evm_nand_partitions));
+                        ARRAY_SIZE(omap3evm_nand_partitions), NAND_CS,
+                        NAND_BUSWIDTH_16, NULL);
        omap_ads7846_init(1, OMAP3_EVM_TS_GPIO, 310, NULL);
        omap3evm_init_smsc911x();
diff --git a/arch/arm/mach-omap2/board-omap3logic.c b/arch/arm/mach-omap2/board-omap3logic.c
index 7bd8253b5d1d..6f58cad5bf74 100644
--- a/arch/arm/mach-omap2/board-omap3logic.c
+++ b/arch/arm/mach-omap2/board-omap3logic.c
@@ -34,9 +34,6 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
-#include "gpmc-smsc911x.h"
-#include <plat/gpmc.h>
-#include <plat/sdrc.h>
 #include <plat/usb.h>
 #include "common.h"
@@ -44,6 +41,8 @@
 #include "hsmmc.h"
 #include "control.h"
 #include "common-board-devices.h"
+#include "gpmc.h"
+#include "gpmc-smsc911x.h"
 #define OMAP3LOGIC_SMSC911X_CS                  1
diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
index 00a1f4ae6e44..f286b4b4bd5b 100644
--- a/arch/arm/mach-omap2/board-omap3pandora.c
+++ b/arch/arm/mach-omap2/board-omap3pandora.c
@@ -50,6 +50,7 @@
 #include "sdram-micron-mt46h32m32lf-6.h"
 #include "hsmmc.h"
 #include "common-board-devices.h"
+#include "gpmc-nand.h"
 #define PANDORA_WIFI_IRQ_GPIO           21
 #define PANDORA_WIFI_NRESET_GPIO        23
@@ -602,7 +603,7 @@ static void __init omap3pandora_init(void)
        omap_ads7846_init(1, OMAP3_PANDORA_TS_GPIO, 0, NULL);
        usbhs_init(&usbhs_bdata);
        usb_musb_init(NULL);
-        gpmc_nand_init(&pandora_nand_data);
+        gpmc_nand_init(&pandora_nand_data, NULL);
        /* Ensure SDRC pins are mux'd for self-refresh */
        omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c
index 731235eb319e..3c83b9fbff45 100644
--- a/arch/arm/mach-omap2/board-omap3stalker.c
+++ b/arch/arm/mach-omap2/board-omap3stalker.c
@@ -40,7 +40,7 @@
 #include <asm/mach/flash.h>
 #include "common.h"
-#include <plat/gpmc.h>
+#include "gpmc.h"
 #include <linux/platform_data/mtd-nand-omap2.h>
 #include <plat/usb.h>
 #include <video/omapdss.h>
diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c
index 944ffc436577..cd282ae0856b 100644
--- a/arch/arm/mach-omap2/board-omap3touchbook.c
+++ b/arch/arm/mach-omap2/board-omap3touchbook.c
@@ -44,12 +44,13 @@
 #include <asm/system_info.h>
 #include "common.h"
-#include <plat/gpmc.h>
+#include "gpmc.h"
 #include <linux/platform_data/mtd-nand-omap2.h>
 #include <plat/usb.h>
 #include "mux.h"
 #include "hsmmc.h"
+#include "board-flash.h"
 #include "common-board-devices.h"
 #include <asm/setup.h>
@@ -59,6 +60,8 @@
 #define TB_BL_PWM_TIMER         9
 #define TB_KILL_POWER_GPIO      168
+#define NAND_CS                 0
 static unsigned long touchbook_revision;
 static struct mtd_partition omap3touchbook_nand_partitions[] = {
@@ -365,8 +368,9 @@ static void __init omap3_touchbook_init(void)
        omap_ads7846_init(4, OMAP3_TS_GPIO, 310, &ads7846_pdata);
        usb_musb_init(NULL);
        usbhs_init(&usbhs_bdata);
-        omap_nand_flash_init(NAND_BUSWIDTH_16, omap3touchbook_nand_partitions,
+        board_nand_init(omap3touchbook_nand_partitions,
-                             ARRAY_SIZE(omap3touchbook_nand_partitions));
+                        ARRAY_SIZE(omap3touchbook_nand_partitions), NAND_CS,
+                        NAND_BUSWIDTH_16, NULL);
        /* Ensure SDRC pins are mux'd for self-refresh */
        omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c
index bfcd397e233c..e9ce9fb9ffac 100644
--- a/arch/arm/mach-omap2/board-omap4panda.c
+++ b/arch/arm/mach-omap2/board-omap4panda.c
@@ -40,10 +40,10 @@
 #include "common.h"
 #include <plat/usb.h>
-#include <plat/mmc.h>
 #include <video/omap-panel-tfp410.h>
 #include "soc.h"
+#include "mmc.h"
 #include "hsmmc.h"
 #include "control.h"
 #include "mux.h"
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index b700685762b5..3a9d1fa8bebd 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -49,14 +49,17 @@
 #include <video/omapdss.h>
 #include <video/omap-panel-generic-dpi.h>
 #include <video/omap-panel-tfp410.h>
-#include <plat/gpmc.h>
+#include "gpmc.h"
 #include <plat/usb.h>
 #include "mux.h"
 #include "sdram-micron-mt46h32m32lf-6.h"
 #include "hsmmc.h"
+#include "board-flash.h"
 #include "common-board-devices.h"
+#define NAND_CS                 0
 #define OVERO_GPIO_BT_XGATE     15
 #define OVERO_GPIO_W2W_NRESET   16
 #define OVERO_GPIO_PENDOWN      114
@@ -495,8 +498,8 @@ static void __init overo_init(void)
        omap_serial_init();
        omap_sdrc_init(mt46h32m32lf6_sdrc_params,
                                  mt46h32m32lf6_sdrc_params);
-        omap_nand_flash_init(0, overo_nand_partitions,
+        board_nand_init(overo_nand_partitions,
-                             ARRAY_SIZE(overo_nand_partitions));
+                        ARRAY_SIZE(overo_nand_partitions), NAND_CS, 0, NULL);
        usb_musb_init(NULL);
        usbhs_init(&usbhs_bdata);
        overo_spi_init();
diff --git a/arch/arm/mach-omap2/board-rm680.c b/arch/arm/mach-omap2/board-rm680.c
index 45997bfbcbd2..d42ecfe56096 100644
--- a/arch/arm/mach-omap2/board-rm680.c
+++ b/arch/arm/mach-omap2/board-rm680.c
@@ -22,17 +22,17 @@
 #include <asm/mach/arch.h>
 #include <asm/mach-types.h>
-#include <plat/i2c.h>
-#include <plat/mmc.h>
 #include <plat/usb.h>
-#include <plat/gpmc.h>
+#include "gpmc.h"
 #include "common.h"
 #include <plat/serial.h>
 #include "mux.h"
+#include "mmc.h"
 #include "hsmmc.h"
 #include "sdram-nokia.h"
 #include "common-board-devices.h"
+#include "gpmc-onenand.h"
 static struct regulator_consumer_supply rm680_vemmc_consumers[] = {
        REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"),
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index 020e03c95bfe..07005fe40a2a 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -31,9 +31,7 @@
 #include <asm/system_info.h>
 #include "common.h"
-#include <plat/dma.h>
+#include <plat-omap/dma-omap.h>
-#include <plat/gpmc.h>
-#include <plat/omap-pm.h>
 #include "gpmc-smc91x.h"
 #include "board-rx51.h"
@@ -52,8 +50,11 @@
 #endif
 #include "mux.h"
+#include "omap-pm.h"
 #include "hsmmc.h"
 #include "common-board-devices.h"
+#include "gpmc.h"
+#include "gpmc-onenand.h"
 #define SYSTEM_REV_B_USES_VAUX3 0x1699
 #define SYSTEM_REV_S_USES_VAUX3 0x8
diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c
index 7bbb05d9689b..63b33c63bd94 100644
--- a/arch/arm/mach-omap2/board-rx51.c
+++ b/arch/arm/mach-omap2/board-rx51.c
@@ -23,12 +23,12 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
-#include "common.h"
+#include <plat-omap/dma-omap.h>
-#include <plat/dma.h>
-#include <plat/gpmc.h>
 #include <plat/usb.h>
+#include "common.h"
 #include "mux.h"
+#include "gpmc.h"
 #include "pm.h"
 #include "sdram-nokia.h"
diff --git a/arch/arm/mach-omap2/board-zoom-debugboard.c b/arch/arm/mach-omap2/board-zoom-debugboard.c
index afb2278a29f6..42e5f231a799 100644
--- a/arch/arm/mach-omap2/board-zoom-debugboard.c
+++ b/arch/arm/mach-omap2/board-zoom-debugboard.c
@@ -17,10 +17,10 @@
 #include <linux/regulator/fixed.h>
 #include <linux/regulator/machine.h>
-#include <plat/gpmc.h>
+#include "gpmc.h"
 #include "gpmc-smsc911x.h"
-#include <mach/board-zoom.h>
+#include "board-zoom.h"
 #include "soc.h"
 #include "common.h"
diff --git a/arch/arm/mach-omap2/board-zoom-display.c b/arch/arm/mach-omap2/board-zoom-display.c
index b940ab2259fb..1c7c834a5b5f 100644
--- a/arch/arm/mach-omap2/board-zoom-display.c
+++ b/arch/arm/mach-omap2/board-zoom-display.c
@@ -16,8 +16,9 @@
 #include <linux/spi/spi.h>
 #include <linux/platform_data/spi-omap2-mcspi.h>
 #include <video/omapdss.h>
-#include <mach/board-zoom.h>
+#include "board-zoom.h"
+#include "soc.h"
 #include "common.h"
 #define LCD_PANEL_RESET_GPIO_PROD       96
diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c
index c166fe1fdff9..74ac565ca9d0 100644
--- a/arch/arm/mach-omap2/board-zoom-peripherals.c
+++ b/arch/arm/mach-omap2/board-zoom-peripherals.c
@@ -28,7 +28,7 @@
 #include "common.h"
 #include <plat/usb.h>
-#include <mach/board-zoom.h>
+#include "board-zoom.h"
 #include "mux.h"
 #include "hsmmc.h"
diff --git a/arch/arm/mach-omap2/board-zoom.c b/arch/arm/mach-omap2/board-zoom.c
index 4994438e1f46..50e98795b09c 100644
--- a/arch/arm/mach-omap2/board-zoom.c
+++ b/arch/arm/mach-omap2/board-zoom.c
@@ -24,7 +24,7 @@
 #include "common.h"
 #include <plat/usb.h>
-#include <mach/board-zoom.h>
+#include "board-zoom.h"
 #include "board-flash.h"
 #include "mux.h"
@@ -113,8 +113,9 @@ static void __init omap_zoom_init(void)
                usbhs_init(&usbhs_bdata);
        }
-        board_nand_init(zoom_nand_partitions, ARRAY_SIZE(zoom_nand_partitions),
+        board_nand_init(zoom_nand_partitions,
-                                                ZOOM_NAND_CS, NAND_BUSWIDTH_16);
+                        ARRAY_SIZE(zoom_nand_partitions), ZOOM_NAND_CS,
+                        NAND_BUSWIDTH_16, nand_default_timings);
        zoom_debugboard_init();
        zoom_peripherals_init();
diff --git a/arch/arm/mach-omap2/include/mach/board-zoom.h b/arch/arm/mach-omap2/board-zoom.h
index 2e9486940ead..2e9486940ead 100644
--- a/arch/arm/mach-omap2/include/mach/board-zoom.h
+++ b/arch/arm/mach-omap2/board-zoom.h
diff --git a/arch/arm/mach-omap2/clkt2xxx_apll.c b/arch/arm/mach-omap2/clkt2xxx_apll.c
index c2d15212d64d..73a1414b89b0 100644
--- a/arch/arm/mach-omap2/clkt2xxx_apll.c
+++ b/arch/arm/mach-omap2/clkt2xxx_apll.c
@@ -21,7 +21,6 @@
 #include <linux/clk.h>
 #include <linux/io.h>
-#include <plat/clock.h>
 #include <plat/prcm.h>
 #include "clock.h"
diff --git a/arch/arm/mach-omap2/clkt2xxx_dpll.c b/arch/arm/mach-omap2/clkt2xxx_dpll.c
index 1502a7bc20bb..0890ba94a282 100644
--- a/arch/arm/mach-omap2/clkt2xxx_dpll.c
+++ b/arch/arm/mach-omap2/clkt2xxx_dpll.c
@@ -14,8 +14,6 @@
 #include <linux/clk.h>
 #include <linux/io.h>
-#include <plat/clock.h>
 #include "clock.h"
 #include "cm2xxx_3xxx.h"
 #include "cm-regbits-24xx.h"
diff --git a/arch/arm/mach-omap2/clkt2xxx_dpllcore.c b/arch/arm/mach-omap2/clkt2xxx_dpllcore.c
index 4ae439222085..3432f913f743 100644
--- a/arch/arm/mach-omap2/clkt2xxx_dpllcore.c
+++ b/arch/arm/mach-omap2/clkt2xxx_dpllcore.c
@@ -25,15 +25,14 @@
 #include <linux/clk.h>
 #include <linux/io.h>
-#include <plat/clock.h>
+#include "../plat-omap/sram.h"
-#include <plat/sram.h>
-#include <plat/sdrc.h>
 #include "clock.h"
 #include "clock2xxx.h"
 #include "opp2xxx.h"
 #include "cm2xxx_3xxx.h"
 #include "cm-regbits-24xx.h"
+#include "sdrc.h"
 /* #define DOWN_VARIABLE_DPLL 1 */              /* Experimental */
diff --git a/arch/arm/mach-omap2/clkt2xxx_osc.c b/arch/arm/mach-omap2/clkt2xxx_osc.c
index c3460928b5e0..e1777371bb5e 100644
--- a/arch/arm/mach-omap2/clkt2xxx_osc.c
+++ b/arch/arm/mach-omap2/clkt2xxx_osc.c
@@ -23,8 +23,6 @@
 #include <linux/clk.h>
 #include <linux/io.h>
-#include <plat/clock.h>
 #include "clock.h"
 #include "clock2xxx.h"
 #include "prm2xxx_3xxx.h"
diff --git a/arch/arm/mach-omap2/clkt2xxx_sys.c b/arch/arm/mach-omap2/clkt2xxx_sys.c
index 8693cfdac49a..46683b3c2461 100644
--- a/arch/arm/mach-omap2/clkt2xxx_sys.c
+++ b/arch/arm/mach-omap2/clkt2xxx_sys.c
@@ -22,8 +22,6 @@
 #include <linux/clk.h>
 #include <linux/io.h>
-#include <plat/clock.h>
 #include "clock.h"
 #include "clock2xxx.h"
 #include "prm2xxx_3xxx.h"
diff --git a/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c b/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c
index 3524f0e7b6d5..c66276b2bf0a 100644
--- a/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c
+++ b/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c
@@ -33,9 +33,7 @@
 #include <linux/cpufreq.h>
 #include <linux/slab.h>
-#include <plat/clock.h>
+#include "../plat-omap/sram.h"
-#include <plat/sram.h>
-#include <plat/sdrc.h>
 #include "soc.h"
 #include "clock.h"
@@ -43,6 +41,7 @@
 #include "opp2xxx.h"
 #include "cm2xxx_3xxx.h"
 #include "cm-regbits-24xx.h"
+#include "sdrc.h"
 const struct prcm_config *curr_prcm_set;
 const struct prcm_config *rate_table;
diff --git a/arch/arm/mach-omap2/clkt34xx_dpll3m2.c b/arch/arm/mach-omap2/clkt34xx_dpll3m2.c
index 7c6da2f731dc..5510d92abe6e 100644
--- a/arch/arm/mach-omap2/clkt34xx_dpll3m2.c
+++ b/arch/arm/mach-omap2/clkt34xx_dpll3m2.c
@@ -21,9 +21,7 @@
 #include <linux/clk.h>
 #include <linux/io.h>
-#include <plat/clock.h>
+#include "../plat-omap/sram.h"
-#include <plat/sram.h>
-#include <plat/sdrc.h>
 #include "clock.h"
 #include "clock3xxx.h"
diff --git a/arch/arm/mach-omap2/clkt_clksel.c b/arch/arm/mach-omap2/clkt_clksel.c
index 3ff22114d702..53646facda45 100644
--- a/arch/arm/mach-omap2/clkt_clksel.c
+++ b/arch/arm/mach-omap2/clkt_clksel.c
@@ -45,8 +45,6 @@
 #include <linux/io.h>
 #include <linux/bug.h>
-#include <plat/clock.h>
 #include "clock.h"
 /* Private functions */
diff --git a/arch/arm/mach-omap2/clkt_dpll.c b/arch/arm/mach-omap2/clkt_dpll.c
index 80411142f482..8463cc356245 100644
--- a/arch/arm/mach-omap2/clkt_dpll.c
+++ b/arch/arm/mach-omap2/clkt_dpll.c
@@ -21,8 +21,6 @@
 #include <asm/div64.h>
-#include <plat/clock.h>
 #include "soc.h"
 #include "clock.h"
 #include "cm-regbits-24xx.h"
diff --git a/arch/arm/mach-omap2/clkt_iclk.c b/arch/arm/mach-omap2/clkt_iclk.c
index 3d43fba2542f..7c8d41e49834 100644
--- a/arch/arm/mach-omap2/clkt_iclk.c
+++ b/arch/arm/mach-omap2/clkt_iclk.c
@@ -14,7 +14,6 @@
 #include <linux/clk.h>
 #include <linux/io.h>
-#include <plat/clock.h>
 #include <plat/prcm.h>
 #include "clock.h"
diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index 961ac8f7e13d..8b30759f8f9e 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -15,6 +15,7 @@
 #undef DEBUG
 #include <linux/kernel.h>
+#include <linux/export.h>
 #include <linux/list.h>
 #include <linux/errno.h>
 #include <linux/err.h>
@@ -25,7 +26,6 @@
 #include <asm/cpu.h>
-#include <plat/clock.h>
 #include <plat/prcm.h>
 #include <trace/events/power.h>
@@ -47,6 +47,10 @@ u16 cpu_mask;
 */
 static bool clkdm_control = true;
+static LIST_HEAD(clocks);
+static DEFINE_MUTEX(clocks_mutex);
+static DEFINE_SPINLOCK(clockfw_lock);
 /*
 * OMAP2+ specific clock functions
 */
@@ -512,12 +516,510 @@ void __init omap2_clk_print_new_rates(const char *hfclkin_ck_name,
 /* Common data */
-struct clk_functions omap2_clk_functions = {
+int clk_enable(struct clk *clk)
-        .clk_enable             = omap2_clk_enable,
+{
-        .clk_disable            = omap2_clk_disable,
+        unsigned long flags;
-        .clk_round_rate         = omap2_clk_round_rate,
+        int ret;
-        .clk_set_rate           = omap2_clk_set_rate,
-        .clk_set_parent         = omap2_clk_set_parent,
+        if (clk == NULL || IS_ERR(clk))
-        .clk_disable_unused     = omap2_clk_disable_unused,
+                return -EINVAL;
+        spin_lock_irqsave(&clockfw_lock, flags);
+        ret = omap2_clk_enable(clk);
+        spin_unlock_irqrestore(&clockfw_lock, flags);
+        return ret;
+}
+EXPORT_SYMBOL(clk_enable);
+void clk_disable(struct clk *clk)
+{
+        unsigned long flags;
+        if (clk == NULL || IS_ERR(clk))
+                return;
+        spin_lock_irqsave(&clockfw_lock, flags);
+        if (clk->usecount == 0) {
+                pr_err("Trying disable clock %s with 0 usecount\n",
+                       clk->name);
+                WARN_ON(1);
+                goto out;
+        }
+        omap2_clk_disable(clk);
+out:
+        spin_unlock_irqrestore(&clockfw_lock, flags);
+}
+EXPORT_SYMBOL(clk_disable);
+unsigned long clk_get_rate(struct clk *clk)
+{
+        unsigned long flags;
+        unsigned long ret;
+        if (clk == NULL || IS_ERR(clk))
+                return 0;
+        spin_lock_irqsave(&clockfw_lock, flags);
+        ret = clk->rate;
+        spin_unlock_irqrestore(&clockfw_lock, flags);
+        return ret;
+}
+EXPORT_SYMBOL(clk_get_rate);
+/*
+ * Optional clock functions defined in include/linux/clk.h
+ */
+long clk_round_rate(struct clk *clk, unsigned long rate)
+{
+        unsigned long flags;
+        long ret;
+        if (clk == NULL || IS_ERR(clk))
+                return 0;
+        spin_lock_irqsave(&clockfw_lock, flags);
+        ret = omap2_clk_round_rate(clk, rate);
+        spin_unlock_irqrestore(&clockfw_lock, flags);
+        return ret;
+}
+EXPORT_SYMBOL(clk_round_rate);
+int clk_set_rate(struct clk *clk, unsigned long rate)
+{
+        unsigned long flags;
+        int ret = -EINVAL;
+        if (clk == NULL || IS_ERR(clk))
+                return ret;
+        spin_lock_irqsave(&clockfw_lock, flags);
+        ret = omap2_clk_set_rate(clk, rate);
+        if (ret == 0)
+                propagate_rate(clk);
+        spin_unlock_irqrestore(&clockfw_lock, flags);
+        return ret;
+}
+EXPORT_SYMBOL(clk_set_rate);
+int clk_set_parent(struct clk *clk, struct clk *parent)
+{
+        unsigned long flags;
+        int ret = -EINVAL;
+        if (clk == NULL || IS_ERR(clk) || parent == NULL || IS_ERR(parent))
+                return ret;
+        spin_lock_irqsave(&clockfw_lock, flags);
+        if (clk->usecount == 0) {
+                ret = omap2_clk_set_parent(clk, parent);
+                if (ret == 0)
+                        propagate_rate(clk);
+        } else {
+                ret = -EBUSY;
+        }
+        spin_unlock_irqrestore(&clockfw_lock, flags);
+        return ret;
+}
+EXPORT_SYMBOL(clk_set_parent);
+struct clk *clk_get_parent(struct clk *clk)
+{
+        return clk->parent;
+}
+EXPORT_SYMBOL(clk_get_parent);
+/*
+ * OMAP specific clock functions shared between omap1 and omap2
+ */
+int __initdata mpurate;
+/*
+ * By default we use the rate set by the bootloader.
+ * You can override this with mpurate= cmdline option.
+ */
+static int __init omap_clk_setup(char *str)
+{
+        get_option(&str, &mpurate);
+        if (!mpurate)
+                return 1;
+        if (mpurate < 1000)
+                mpurate *= 1000000;
+        return 1;
+}
+__setup("mpurate=", omap_clk_setup);
+/* Used for clocks that always have same value as the parent clock */
+unsigned long followparent_recalc(struct clk *clk)
+{
+        return clk->parent->rate;
+}
+/*
+ * Used for clocks that have the same value as the parent clock,
+ * divided by some factor
+ */
+unsigned long omap_fixed_divisor_recalc(struct clk *clk)
+{
+        WARN_ON(!clk->fixed_div);
+        return clk->parent->rate / clk->fixed_div;
+}
+void clk_reparent(struct clk *child, struct clk *parent)
+{
+        list_del_init(&child->sibling);
+        if (parent)
+                list_add(&child->sibling, &parent->children);
+        child->parent = parent;
+        /* now do the debugfs renaming to reattach the child
+           to the proper parent */
+}
+/* Propagate rate to children */
+void propagate_rate(struct clk *tclk)
+{
+        struct clk *clkp;
+        list_for_each_entry(clkp, &tclk->children, sibling) {
+                if (clkp->recalc)
+                        clkp->rate = clkp->recalc(clkp);
+                propagate_rate(clkp);
+        }
+}
+static LIST_HEAD(root_clks);
+/**
+ * recalculate_root_clocks - recalculate and propagate all root clocks
+ *
+ * Recalculates all root clocks (clocks with no parent), which if the
+ * clock's .recalc is set correctly, should also propagate their rates.
+ * Called at init.
+ */
+void recalculate_root_clocks(void)
+{
+        struct clk *clkp;
+        list_for_each_entry(clkp, &root_clks, sibling) {
+                if (clkp->recalc)
+                        clkp->rate = clkp->recalc(clkp);
+                propagate_rate(clkp);
+        }
+}
+/**
+ * clk_preinit - initialize any fields in the struct clk before clk init
+ * @clk: struct clk * to initialize
+ *
+ * Initialize any struct clk fields needed before normal clk initialization
+ * can run.  No return value.
+ */
+void clk_preinit(struct clk *clk)
+{
+        INIT_LIST_HEAD(&clk->children);
+}
+int clk_register(struct clk *clk)
+{
+        if (clk == NULL || IS_ERR(clk))
+                return -EINVAL;
+        /*
+         * trap out already registered clocks
+         */
+        if (clk->node.next || clk->node.prev)
+                return 0;
+        mutex_lock(&clocks_mutex);
+        if (clk->parent)
+                list_add(&clk->sibling, &clk->parent->children);
+        else
+                list_add(&clk->sibling, &root_clks);
+        list_add(&clk->node, &clocks);
+        if (clk->init)
+                clk->init(clk);
+        mutex_unlock(&clocks_mutex);
+        return 0;
+}
+EXPORT_SYMBOL(clk_register);
+void clk_unregister(struct clk *clk)
+{
+        if (clk == NULL || IS_ERR(clk))
+                return;
+        mutex_lock(&clocks_mutex);
+        list_del(&clk->sibling);
+        list_del(&clk->node);
+        mutex_unlock(&clocks_mutex);
+}
+EXPORT_SYMBOL(clk_unregister);
+void clk_enable_init_clocks(void)
+{
+        struct clk *clkp;
+        list_for_each_entry(clkp, &clocks, node)
+                if (clkp->flags & ENABLE_ON_INIT)
+                        clk_enable(clkp);
+}
+/**
+ * omap_clk_get_by_name - locate OMAP struct clk by its name
+ * @name: name of the struct clk to locate
+ *
+ * Locate an OMAP struct clk by its name.  Assumes that struct clk
+ * names are unique.  Returns NULL if not found or a pointer to the
+ * struct clk if found.
+ */
+struct clk *omap_clk_get_by_name(const char *name)
+{
+        struct clk *c;
+        struct clk *ret = NULL;
+        mutex_lock(&clocks_mutex);
+        list_for_each_entry(c, &clocks, node) {
+                if (!strcmp(c->name, name)) {
+                        ret = c;
+                        break;
+                }
+        }
+        mutex_unlock(&clocks_mutex);
+        return ret;
+}
+int omap_clk_enable_autoidle_all(void)
+{
+        struct clk *c;
+        unsigned long flags;
+        spin_lock_irqsave(&clockfw_lock, flags);
+        list_for_each_entry(c, &clocks, node)
+                if (c->ops->allow_idle)
+                        c->ops->allow_idle(c);
+        spin_unlock_irqrestore(&clockfw_lock, flags);
+        return 0;
+}
+int omap_clk_disable_autoidle_all(void)
+{
+        struct clk *c;
+        unsigned long flags;
+        spin_lock_irqsave(&clockfw_lock, flags);
+        list_for_each_entry(c, &clocks, node)
+                if (c->ops->deny_idle)
+                        c->ops->deny_idle(c);
+        spin_unlock_irqrestore(&clockfw_lock, flags);
+        return 0;
+}
+/*
+ * Low level helpers
+ */
+static int clkll_enable_null(struct clk *clk)
+{
+        return 0;
+}
+static void clkll_disable_null(struct clk *clk)
+{
+}
+const struct clkops clkops_null = {
+        .enable         = clkll_enable_null,
+        .disable        = clkll_disable_null,
+};
+/*
+ * Dummy clock
+ *
+ * Used for clock aliases that are needed on some OMAPs, but not others
+ */
+struct clk dummy_ck = {
+        .name   = "dummy",
+        .ops    = &clkops_null,
+};
+/*
+ *
+ */
+#ifdef CONFIG_OMAP_RESET_CLOCKS
+/*
+ * Disable any unused clocks left on by the bootloader
+ */
+static int __init clk_disable_unused(void)
+{
+        struct clk *ck;
+        unsigned long flags;
+        pr_info("clock: disabling unused clocks to save power\n");
+        spin_lock_irqsave(&clockfw_lock, flags);
+        list_for_each_entry(ck, &clocks, node) {
+                if (ck->ops == &clkops_null)
+                        continue;
+                if (ck->usecount > 0 || !ck->enable_reg)
+                        continue;
+                omap2_clk_disable_unused(ck);
+        }
+        spin_unlock_irqrestore(&clockfw_lock, flags);
+        return 0;
+}
+late_initcall(clk_disable_unused);
+late_initcall(omap_clk_enable_autoidle_all);
+#endif
+#if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS)
+/*
+ *      debugfs support to trace clock tree hierarchy and attributes
+ */
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+static struct dentry *clk_debugfs_root;
+static int clk_dbg_show_summary(struct seq_file *s, void *unused)
+{
+        struct clk *c;
+        struct clk *pa;
+        mutex_lock(&clocks_mutex);
+        seq_printf(s, "%-30s %-30s %-10s %s\n",
+                   "clock-name", "parent-name", "rate", "use-count");
+        list_for_each_entry(c, &clocks, node) {
+                pa = c->parent;
+                seq_printf(s, "%-30s %-30s %-10lu %d\n",
+                           c->name, pa ? pa->name : "none", c->rate,
+                           c->usecount);
+        }
+        mutex_unlock(&clocks_mutex);
+        return 0;
+}
+static int clk_dbg_open(struct inode *inode, struct file *file)
+{
+        return single_open(file, clk_dbg_show_summary, inode->i_private);
+}
+static const struct file_operations debug_clock_fops = {
+        .open           = clk_dbg_open,
+        .read           = seq_read,
+        .llseek         = seq_lseek,
+        .release        = single_release,
 };
+static int clk_debugfs_register_one(struct clk *c)
+{
+        int err;
+        struct dentry *d;
+        struct clk *pa = c->parent;
+        d = debugfs_create_dir(c->name, pa ? pa->dent : clk_debugfs_root);
+        if (!d)
+                return -ENOMEM;
+        c->dent = d;
+        d = debugfs_create_u8("usecount", S_IRUGO, c->dent, (u8 *)&c->usecount);
+        if (!d) {
+                err = -ENOMEM;
+                goto err_out;
+        }
+        d = debugfs_create_u32("rate", S_IRUGO, c->dent, (u32 *)&c->rate);
+        if (!d) {
+                err = -ENOMEM;
+                goto err_out;
+        }
+        d = debugfs_create_x32("flags", S_IRUGO, c->dent, (u32 *)&c->flags);
+        if (!d) {
+                err = -ENOMEM;
+                goto err_out;
+        }
+        return 0;
+err_out:
+        debugfs_remove_recursive(c->dent);
+        return err;
+}
+static int clk_debugfs_register(struct clk *c)
+{
+        int err;
+        struct clk *pa = c->parent;
+        if (pa && !pa->dent) {
+                err = clk_debugfs_register(pa);
+                if (err)
+                        return err;
+        }
+        if (!c->dent) {
+                err = clk_debugfs_register_one(c);
+                if (err)
+                        return err;
+        }
+        return 0;
+}
+static int __init clk_debugfs_init(void)
+{
+        struct clk *c;
+        struct dentry *d;
+        int err;
+        d = debugfs_create_dir("clock", NULL);
+        if (!d)
+                return -ENOMEM;
+        clk_debugfs_root = d;
+        list_for_each_entry(c, &clocks, node) {
+                err = clk_debugfs_register(c);
+                if (err)
+                        goto err_out;
+        }
+        d = debugfs_create_file("summary", S_IRUGO,
+                d, NULL, &debug_clock_fops);
+        if (!d)
+                return -ENOMEM;
+        return 0;
+err_out:
+        debugfs_remove_recursive(clk_debugfs_root);
+        return err;
+}
+late_initcall(clk_debugfs_init);
+#endif /* defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS) */
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index 35ec5f3d9a73..cfba1ffe5cc2 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -17,8 +17,323 @@
 #define __ARCH_ARM_MACH_OMAP2_CLOCK_H
 #include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/clkdev.h>
+struct omap_clk {
+        u16                             cpu;
+        struct clk_lookup               lk;
+};
+#define CLK(dev, con, ck, cp)           \
+        {                               \
+                 .cpu = cp,             \
+                .lk = {                 \
+                        .dev_id = dev,  \
+                        .con_id = con,  \
+                        .clk = ck,      \
+                },                      \
+        }
+/* Platform flags for the clkdev-OMAP integration code */
+#define CK_242X         (1 << 0)
+#define CK_243X         (1 << 1)        /* 243x, 253x */
+#define CK_3430ES1      (1 << 2)        /* 34xxES1 only */
+#define CK_3430ES2PLUS  (1 << 3)        /* 34xxES2, ES3, non-Sitara 35xx only */
+#define CK_AM35XX       (1 << 4)        /* Sitara AM35xx */
+#define CK_36XX         (1 << 5)        /* 36xx/37xx-specific clocks */
+#define CK_443X         (1 << 6)
+#define CK_TI816X       (1 << 7)
+#define CK_446X         (1 << 8)
+#define CK_AM33XX       (1 << 9)        /* AM33xx specific clocks */
+#define CK_34XX         (CK_3430ES1 | CK_3430ES2PLUS)
+#define CK_3XXX         (CK_34XX | CK_AM35XX | CK_36XX)
+struct module;
+struct clk;
+struct clockdomain;
+/* Temporary, needed during the common clock framework conversion */
+#define __clk_get_name(clk)     (clk->name)
+#define __clk_get_parent(clk)   (clk->parent)
+#define __clk_get_rate(clk)     (clk->rate)
+/**
+ * struct clkops - some clock function pointers
+ * @enable: fn ptr that enables the current clock in hardware
+ * @disable: fn ptr that enables the current clock in hardware
+ * @find_idlest: function returning the IDLEST register for the clock's IP blk
+ * @find_companion: function returning the "companion" clk reg for the clock
+ * @allow_idle: fn ptr that enables autoidle for the current clock in hardware
+ * @deny_idle: fn ptr that disables autoidle for the current clock in hardware
+ *
+ * A "companion" clk is an accompanying clock to the one being queried
+ * that must be enabled for the IP module connected to the clock to
+ * become accessible by the hardware.  Neither @find_idlest nor
+ * @find_companion should be needed; that information is IP
+ * block-specific; the hwmod code has been created to handle this, but
+ * until hwmod data is ready and drivers have been converted to use PM
+ * runtime calls in place of clk_enable()/clk_disable(), @find_idlest and
+ * @find_companion must, unfortunately, remain.
+ */
+struct clkops {
+        int                     (*enable)(struct clk *);
+        void                    (*disable)(struct clk *);
+        void                    (*find_idlest)(struct clk *, void __iomem **,
+                                               u8 *, u8 *);
+        void                    (*find_companion)(struct clk *, void __iomem **,
+                                                  u8 *);
+        void                    (*allow_idle)(struct clk *);
+        void                    (*deny_idle)(struct clk *);
+};
+/* struct clksel_rate.flags possibilities */
+#define RATE_IN_242X            (1 << 0)
+#define RATE_IN_243X            (1 << 1)
+#define RATE_IN_3430ES1         (1 << 2)        /* 3430ES1 rates only */
+#define RATE_IN_3430ES2PLUS     (1 << 3)        /* 3430 ES >= 2 rates only */
+#define RATE_IN_36XX            (1 << 4)
+#define RATE_IN_4430            (1 << 5)
+#define RATE_IN_TI816X          (1 << 6)
+#define RATE_IN_4460            (1 << 7)
+#define RATE_IN_AM33XX          (1 << 8)
+#define RATE_IN_TI814X          (1 << 9)
+#define RATE_IN_24XX            (RATE_IN_242X | RATE_IN_243X)
+#define RATE_IN_34XX            (RATE_IN_3430ES1 | RATE_IN_3430ES2PLUS)
+#define RATE_IN_3XXX            (RATE_IN_34XX | RATE_IN_36XX)
+#define RATE_IN_44XX            (RATE_IN_4430 | RATE_IN_4460)
+/* RATE_IN_3430ES2PLUS_36XX includes 34xx/35xx with ES >=2, and all 36xx/37xx */
+#define RATE_IN_3430ES2PLUS_36XX        (RATE_IN_3430ES2PLUS | RATE_IN_36XX)
+/**
+ * struct clksel_rate - register bitfield values corresponding to clk divisors
+ * @val: register bitfield value (shifted to bit 0)
+ * @div: clock divisor corresponding to @val
+ * @flags: (see "struct clksel_rate.flags possibilities" above)
+ *
+ * @val should match the value of a read from struct clk.clksel_reg
+ * AND'ed with struct clk.clksel_mask, shifted right to bit 0.
+ *
+ * @div is the divisor that should be applied to the parent clock's rate
+ * to produce the current clock's rate.
+ */
+struct clksel_rate {
+        u32                     val;
+        u8                      div;
+        u16                     flags;
+};
+/**
+ * struct clksel - available parent clocks, and a pointer to their divisors
+ * @parent: struct clk * to a possible parent clock
+ * @rates: available divisors for this parent clock
+ *
+ * A struct clksel is always associated with one or more struct clks
+ * and one or more struct clksel_rates.
+ */
+struct clksel {
+        struct clk               *parent;
+        const struct clksel_rate *rates;
+};
+/**
+ * struct dpll_data - DPLL registers and integration data
+ * @mult_div1_reg: register containing the DPLL M and N bitfields
+ * @mult_mask: mask of the DPLL M bitfield in @mult_div1_reg
+ * @div1_mask: mask of the DPLL N bitfield in @mult_div1_reg
+ * @clk_bypass: struct clk pointer to the clock's bypass clock input
+ * @clk_ref: struct clk pointer to the clock's reference clock input
+ * @control_reg: register containing the DPLL mode bitfield
+ * @enable_mask: mask of the DPLL mode bitfield in @control_reg
+ * @last_rounded_rate: cache of the last rate result of omap2_dpll_round_rate()
+ * @last_rounded_m: cache of the last M result of omap2_dpll_round_rate()
+ * @max_multiplier: maximum valid non-bypass multiplier value (actual)
+ * @last_rounded_n: cache of the last N result of omap2_dpll_round_rate()
+ * @min_divider: minimum valid non-bypass divider value (actual)
+ * @max_divider: maximum valid non-bypass divider value (actual)
+ * @modes: possible values of @enable_mask
+ * @autoidle_reg: register containing the DPLL autoidle mode bitfield
+ * @idlest_reg: register containing the DPLL idle status bitfield
+ * @autoidle_mask: mask of the DPLL autoidle mode bitfield in @autoidle_reg
+ * @freqsel_mask: mask of the DPLL jitter correction bitfield in @control_reg
+ * @idlest_mask: mask of the DPLL idle status bitfield in @idlest_reg
+ * @auto_recal_bit: bitshift of the driftguard enable bit in @control_reg
+ * @recal_en_bit: bitshift of the PRM_IRQENABLE_* bit for recalibration IRQs
+ * @recal_st_bit: bitshift of the PRM_IRQSTATUS_* bit for recalibration IRQs
+ * @flags: DPLL type/features (see below)
+ *
+ * Possible values for @flags:
+ * DPLL_J_TYPE: "J-type DPLL" (only some 36xx, 4xxx DPLLs)
+ *
+ * @freqsel_mask is only used on the OMAP34xx family and AM35xx.
+ *
+ * XXX Some DPLLs have multiple bypass inputs, so it's not technically
+ * correct to only have one @clk_bypass pointer.
+ *
+ * XXX The runtime-variable fields (@last_rounded_rate, @last_rounded_m,
+ * @last_rounded_n) should be separated from the runtime-fixed fields
+ * and placed into a different structure, so that the runtime-fixed data
+ * can be placed into read-only space.
+ */
+struct dpll_data {
+        void __iomem            *mult_div1_reg;
+        u32                     mult_mask;
+        u32                     div1_mask;
+        struct clk              *clk_bypass;
+        struct clk              *clk_ref;
+        void __iomem            *control_reg;
+        u32                     enable_mask;
+        unsigned long           last_rounded_rate;
+        u16                     last_rounded_m;
+        u16                     max_multiplier;
+        u8                      last_rounded_n;
+        u8                      min_divider;
+        u16                     max_divider;
+        u8                      modes;
+        void __iomem            *autoidle_reg;
+        void __iomem            *idlest_reg;
+        u32                     autoidle_mask;
+        u32                     freqsel_mask;
+        u32                     idlest_mask;
+        u32                     dco_mask;
+        u32                     sddiv_mask;
+        u8                      auto_recal_bit;
+        u8                      recal_en_bit;
+        u8                      recal_st_bit;
+        u8                      flags;
+};
+/*
+ * struct clk.flags possibilities
+ *
+ * XXX document the rest of the clock flags here
+ *
+ * CLOCK_CLKOUTX2: (OMAP4 only) DPLL CLKOUT and CLKOUTX2 GATE_CTRL
+ *     bits share the same register.  This flag allows the
+ *     omap4_dpllmx*() code to determine which GATE_CTRL bit field
+ *     should be used.  This is a temporary solution - a better approach
+ *     would be to associate clock type-specific data with the clock,
+ *     similar to the struct dpll_data approach.
+ */
+#define ENABLE_REG_32BIT        (1 << 0)        /* Use 32-bit access */
+#define CLOCK_IDLE_CONTROL      (1 << 1)
+#define CLOCK_NO_IDLE_PARENT    (1 << 2)
+#define ENABLE_ON_INIT          (1 << 3)        /* Enable upon framework init */
+#define INVERT_ENABLE           (1 << 4)        /* 0 enables, 1 disables */
+#define CLOCK_CLKOUTX2          (1 << 5)
+/**
+ * struct clk - OMAP struct clk
+ * @node: list_head connecting this clock into the full clock list
+ * @ops: struct clkops * for this clock
+ * @name: the name of the clock in the hardware (used in hwmod data and debug)
+ * @parent: pointer to this clock's parent struct clk
+ * @children: list_head connecting to the child clks' @sibling list_heads
+ * @sibling: list_head connecting this clk to its parent clk's @children
+ * @rate: current clock rate
+ * @enable_reg: register to write to enable the clock (see @enable_bit)
+ * @recalc: fn ptr that returns the clock's current rate
+ * @set_rate: fn ptr that can change the clock's current rate
+ * @round_rate: fn ptr that can round the clock's current rate
+ * @init: fn ptr to do clock-specific initialization
+ * @enable_bit: bitshift to write to enable/disable the clock (see @enable_reg)
+ * @usecount: number of users that have requested this clock to be enabled
+ * @fixed_div: when > 0, this clock's rate is its parent's rate / @fixed_div
+ * @flags: see "struct clk.flags possibilities" above
+ * @clksel_reg: for clksel clks, register va containing src/divisor select
+ * @clksel_mask: bitmask in @clksel_reg for the src/divisor selector
+ * @clksel: for clksel clks, pointer to struct clksel for this clock
+ * @dpll_data: for DPLLs, pointer to struct dpll_data for this clock
+ * @clkdm_name: clockdomain name that this clock is contained in
+ * @clkdm: pointer to struct clockdomain, resolved from @clkdm_name at runtime
+ * @rate_offset: bitshift for rate selection bitfield (OMAP1 only)
+ * @src_offset: bitshift for source selection bitfield (OMAP1 only)
+ *
+ * XXX @rate_offset, @src_offset should probably be removed and OMAP1
+ * clock code converted to use clksel.
+ *
+ * XXX @usecount is poorly named.  It should be "enable_count" or
+ * something similar.  "users" in the description refers to kernel
+ * code (core code or drivers) that have called clk_enable() and not
+ * yet called clk_disable(); the usecount of parent clocks is also
+ * incremented by the clock code when clk_enable() is called on child
+ * clocks and decremented by the clock code when clk_disable() is
+ * called on child clocks.
+ *
+ * XXX @clkdm, @usecount, @children, @sibling should be marked for
+ * internal use only.
+ *
+ * @children and @sibling are used to optimize parent-to-child clock
+ * tree traversals.  (child-to-parent traversals use @parent.)
+ *
+ * XXX The notion of the clock's current rate probably needs to be
+ * separated from the clock's target rate.
+ */
+struct clk {
+        struct list_head        node;
+        const struct clkops     *ops;
+        const char              *name;
+        struct clk              *parent;
+        struct list_head        children;
+        struct list_head        sibling;        /* node for children */
+        unsigned long           rate;
+        void __iomem            *enable_reg;
+        unsigned long           (*recalc)(struct clk *);
+        int                     (*set_rate)(struct clk *, unsigned long);
+        long                    (*round_rate)(struct clk *, unsigned long);
+        void                    (*init)(struct clk *);
+        u8                      enable_bit;
+        s8                      usecount;
+        u8                      fixed_div;
+        u8                      flags;
+        void __iomem            *clksel_reg;
+        u32                     clksel_mask;
+        const struct clksel     *clksel;
+        struct dpll_data        *dpll_data;
+        const char              *clkdm_name;
+        struct clockdomain      *clkdm;
+#if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS)
+        struct dentry           *dent;  /* For visible tree hierarchy */
+#endif
+};
+struct clk_functions {
+        int             (*clk_enable)(struct clk *clk);
+        void            (*clk_disable)(struct clk *clk);
+        long            (*clk_round_rate)(struct clk *clk, unsigned long rate);
+        int             (*clk_set_rate)(struct clk *clk, unsigned long rate);
+        int             (*clk_set_parent)(struct clk *clk, struct clk *parent);
+        void            (*clk_allow_idle)(struct clk *clk);
+        void            (*clk_deny_idle)(struct clk *clk);
+        void            (*clk_disable_unused)(struct clk *clk);
+};
+extern int mpurate;
+extern int clk_init(struct clk_functions *custom_clocks);
+extern void clk_preinit(struct clk *clk);
+extern int clk_register(struct clk *clk);
+extern void clk_reparent(struct clk *child, struct clk *parent);
+extern void clk_unregister(struct clk *clk);
+extern void propagate_rate(struct clk *clk);
+extern void recalculate_root_clocks(void);
+extern unsigned long followparent_recalc(struct clk *clk);
+extern void clk_enable_init_clocks(void);
+unsigned long omap_fixed_divisor_recalc(struct clk *clk);
+extern struct clk *omap_clk_get_by_name(const char *name);
+extern int omap_clk_enable_autoidle_all(void);
+extern int omap_clk_disable_autoidle_all(void);
+extern const struct clkops clkops_null;
+extern struct clk dummy_ck;
-#include <plat/clock.h>
 /* CM_CLKSEL2_PLL.CORE_CLK_SRC bits (2XXX) */
 #define CORE_CLK_SRC_32K                0x0
diff --git a/arch/arm/mach-omap2/clock2420_data.c b/arch/arm/mach-omap2/clock2420_data.c
index c3cde1a2b6de..ff47a6c2611d 100644
--- a/arch/arm/mach-omap2/clock2420_data.c
+++ b/arch/arm/mach-omap2/clock2420_data.c
@@ -18,8 +18,6 @@
 #include <linux/clk.h>
 #include <linux/list.h>
-#include <plat/clkdev_omap.h>
 #include "soc.h"
 #include "iomap.h"
 #include "clock.h"
@@ -1935,8 +1933,6 @@ int __init omap2420_clk_init(void)
        cpu_mask = RATE_IN_242X;
        rate_table = omap2420_rate_table;
-        clk_init(&omap2_clk_functions);
        for (c = omap2420_clks; c < omap2420_clks + ARRAY_SIZE(omap2420_clks);
             c++)
                clk_preinit(c->lk.clk);
diff --git a/arch/arm/mach-omap2/clock2430.c b/arch/arm/mach-omap2/clock2430.c
index a8e326177466..850f83e8954f 100644
--- a/arch/arm/mach-omap2/clock2430.c
+++ b/arch/arm/mach-omap2/clock2430.c
@@ -21,8 +21,6 @@
 #include <linux/clk.h>
 #include <linux/io.h>
-#include <plat/clock.h>
 #include "soc.h"
 #include "iomap.h"
 #include "clock.h"
diff --git a/arch/arm/mach-omap2/clock2430_data.c b/arch/arm/mach-omap2/clock2430_data.c
index 22404fe435e7..cab8e9c52d6e 100644
--- a/arch/arm/mach-omap2/clock2430_data.c
+++ b/arch/arm/mach-omap2/clock2430_data.c
@@ -17,8 +17,6 @@
 #include <linux/clk.h>
 #include <linux/list.h>
-#include <plat/clkdev_omap.h>
 #include "soc.h"
 #include "iomap.h"
 #include "clock.h"
@@ -2034,8 +2032,6 @@ int __init omap2430_clk_init(void)
        cpu_mask = RATE_IN_243X;
        rate_table = omap2430_rate_table;
-        clk_init(&omap2_clk_functions);
        for (c = omap2430_clks; c < omap2430_clks + ARRAY_SIZE(omap2430_clks);
             c++)
                clk_preinit(c->lk.clk);
diff --git a/arch/arm/mach-omap2/clock2xxx.c b/arch/arm/mach-omap2/clock2xxx.c
index e92be1fc1a00..5feee16fee0e 100644
--- a/arch/arm/mach-omap2/clock2xxx.c
+++ b/arch/arm/mach-omap2/clock2xxx.c
@@ -22,8 +22,6 @@
 #include <linux/clk.h>
 #include <linux/io.h>
-#include <plat/clock.h>
 #include "soc.h"
 #include "clock.h"
 #include "clock2xxx.h"
diff --git a/arch/arm/mach-omap2/clock33xx_data.c b/arch/arm/mach-omap2/clock33xx_data.c
index 114ab4b8e0e3..1cb79cc58089 100644
--- a/arch/arm/mach-omap2/clock33xx_data.c
+++ b/arch/arm/mach-omap2/clock33xx_data.c
@@ -17,9 +17,8 @@
 #include <linux/kernel.h>
 #include <linux/list.h>
 #include <linux/clk.h>
-#include <plat/clkdev_omap.h>
-#include "am33xx.h"
+#include "soc.h"
 #include "iomap.h"
 #include "control.h"
 #include "clock.h"
@@ -1085,8 +1084,6 @@ int __init am33xx_clk_init(void)
                cpu_clkflg = CK_AM33XX;
        }
-        clk_init(&omap2_clk_functions);
        for (c = am33xx_clks; c < am33xx_clks + ARRAY_SIZE(am33xx_clks); c++)
                clk_preinit(c->lk.clk);
diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c
index 1fc96b9ee330..baaaa4258708 100644
--- a/arch/arm/mach-omap2/clock34xx.c
+++ b/arch/arm/mach-omap2/clock34xx.c
@@ -21,8 +21,6 @@
 #include <linux/clk.h>
 #include <linux/io.h>
-#include <plat/clock.h>
 #include "clock.h"
 #include "clock34xx.h"
 #include "cm2xxx_3xxx.h"
diff --git a/arch/arm/mach-omap2/clock3517.c b/arch/arm/mach-omap2/clock3517.c
index 2e97d08f0e56..80209050cd7a 100644
--- a/arch/arm/mach-omap2/clock3517.c
+++ b/arch/arm/mach-omap2/clock3517.c
@@ -21,8 +21,6 @@
 #include <linux/clk.h>
 #include <linux/io.h>
-#include <plat/clock.h>
 #include "clock.h"
 #include "clock3517.h"
 #include "cm2xxx_3xxx.h"
diff --git a/arch/arm/mach-omap2/clock36xx.c b/arch/arm/mach-omap2/clock36xx.c
index 0c5e25ed8879..0e1e9e4e2fa4 100644
--- a/arch/arm/mach-omap2/clock36xx.c
+++ b/arch/arm/mach-omap2/clock36xx.c
@@ -22,8 +22,6 @@
 #include <linux/clk.h>
 #include <linux/io.h>
-#include <plat/clock.h>
 #include "clock.h"
 #include "clock36xx.h"
diff --git a/arch/arm/mach-omap2/clock3xxx.c b/arch/arm/mach-omap2/clock3xxx.c
index 83bb01427d40..3e8aca2b1b61 100644
--- a/arch/arm/mach-omap2/clock3xxx.c
+++ b/arch/arm/mach-omap2/clock3xxx.c
@@ -21,8 +21,6 @@
 #include <linux/clk.h>
 #include <linux/io.h>
-#include <plat/clock.h>
 #include "soc.h"
 #include "clock.h"
 #include "clock3xxx.h"
diff --git a/arch/arm/mach-omap2/clock3xxx_data.c b/arch/arm/mach-omap2/clock3xxx_data.c
index 1f42c9d5ecf3..a02d158568e8 100644
--- a/arch/arm/mach-omap2/clock3xxx_data.c
+++ b/arch/arm/mach-omap2/clock3xxx_data.c
@@ -21,8 +21,6 @@
 #include <linux/list.h>
 #include <linux/io.h>
-#include <plat/clkdev_omap.h>
 #include "soc.h"
 #include "iomap.h"
 #include "clock.h"
@@ -3573,8 +3571,6 @@ int __init omap3xxx_clk_init(void)
        else
                dpll4_dd = dpll4_dd_34xx;
-        clk_init(&omap2_clk_functions);
        for (c = omap3xxx_clks; c < omap3xxx_clks + ARRAY_SIZE(omap3xxx_clks);
             c++)
                clk_preinit(c->lk.clk);
diff --git a/arch/arm/mach-omap2/clock44xx_data.c b/arch/arm/mach-omap2/clock44xx_data.c
index 6efc30c961a5..2a450c9b9a7b 100644
--- a/arch/arm/mach-omap2/clock44xx_data.c
+++ b/arch/arm/mach-omap2/clock44xx_data.c
@@ -28,8 +28,6 @@
 #include <linux/clk.h>
 #include <linux/io.h>
-#include <plat/clkdev_omap.h>
 #include "soc.h"
 #include "iomap.h"
 #include "clock.h"
@@ -3366,8 +3364,6 @@ int __init omap4xxx_clk_init(void)
                return 0;
        }
-        clk_init(&omap2_clk_functions);
        /*
         * Must stay commented until all OMAP SoC drivers are
         * converted to runtime PM, or drivers may start crashing
diff --git a/arch/arm/mach-omap2/clockdomain.c b/arch/arm/mach-omap2/clockdomain.c
index 512e79a842cb..64e50465a4b5 100644
--- a/arch/arm/mach-omap2/clockdomain.c
+++ b/arch/arm/mach-omap2/clockdomain.c
@@ -27,7 +27,8 @@
 #include <linux/bitops.h>
-#include <plat/clock.h>
+#include "soc.h"
+#include "clock.h"
 #include "clockdomain.h"
 /* clkdm_list contains all registered struct clockdomains */
diff --git a/arch/arm/mach-omap2/clockdomain.h b/arch/arm/mach-omap2/clockdomain.h
index 629576be7444..bc42446e23ab 100644
--- a/arch/arm/mach-omap2/clockdomain.h
+++ b/arch/arm/mach-omap2/clockdomain.h
@@ -18,9 +18,8 @@
 #include <linux/spinlock.h>
 #include "powerdomain.h"
-#include <plat/clock.h>
+#include "clock.h"
-#include <plat/omap_hwmod.h>
+#include "omap_hwmod.h"
-#include <plat/cpu.h>
 /*
 * Clockdomain flags
diff --git a/arch/arm/mach-omap2/clockdomain2xxx_3xxx.c b/arch/arm/mach-omap2/clockdomain2xxx_3xxx.c
index 70294f54e35a..3e4e9209b2df 100644
--- a/arch/arm/mach-omap2/clockdomain2xxx_3xxx.c
+++ b/arch/arm/mach-omap2/clockdomain2xxx_3xxx.c
@@ -14,6 +14,8 @@
 #include <linux/types.h>
 #include <plat/prcm.h>
+#include "soc.h"
 #include "prm.h"
 #include "prm2xxx_3xxx.h"
 #include "cm.h"
diff --git a/arch/arm/mach-omap2/clockdomains2420_data.c b/arch/arm/mach-omap2/clockdomains2420_data.c
index 5c741852fac0..7e76becf3a4a 100644
--- a/arch/arm/mach-omap2/clockdomains2420_data.c
+++ b/arch/arm/mach-omap2/clockdomains2420_data.c
@@ -35,6 +35,7 @@
 #include <linux/kernel.h>
 #include <linux/io.h>
+#include "soc.h"
 #include "clockdomain.h"
 #include "prm2xxx_3xxx.h"
 #include "cm2xxx_3xxx.h"
diff --git a/arch/arm/mach-omap2/clockdomains2430_data.c b/arch/arm/mach-omap2/clockdomains2430_data.c
index f09617555e15..b923007e45d0 100644
--- a/arch/arm/mach-omap2/clockdomains2430_data.c
+++ b/arch/arm/mach-omap2/clockdomains2430_data.c
@@ -35,6 +35,7 @@
 #include <linux/kernel.h>
 #include <linux/io.h>
+#include "soc.h"
 #include "clockdomain.h"
 #include "prm2xxx_3xxx.h"
 #include "cm2xxx_3xxx.h"
diff --git a/arch/arm/mach-omap2/clockdomains3xxx_data.c b/arch/arm/mach-omap2/clockdomains3xxx_data.c
index 933a35cd124a..e6b91e552d3d 100644
--- a/arch/arm/mach-omap2/clockdomains3xxx_data.c
+++ b/arch/arm/mach-omap2/clockdomains3xxx_data.c
@@ -33,6 +33,7 @@
 #include <linux/kernel.h>
 #include <linux/io.h>
+#include "soc.h"
 #include "clockdomain.h"
 #include "prm2xxx_3xxx.h"
 #include "cm2xxx_3xxx.h"
diff --git a/arch/arm/mach-omap2/cm33xx.c b/arch/arm/mach-omap2/cm33xx.c
index 13f56eafef03..b4938abf28cc 100644
--- a/arch/arm/mach-omap2/cm33xx.c
+++ b/arch/arm/mach-omap2/cm33xx.c
@@ -22,7 +22,7 @@
 #include <linux/err.h>
 #include <linux/io.h>
-#include <plat/common.h>
+#include "../plat-omap/common.h"
 #include "cm.h"
 #include "cm33xx.h"
diff --git a/arch/arm/mach-omap2/common-board-devices.c b/arch/arm/mach-omap2/common-board-devices.c
index 48daac2581b4..ad856092c06a 100644
--- a/arch/arm/mach-omap2/common-board-devices.c
+++ b/arch/arm/mach-omap2/common-board-devices.c
@@ -25,7 +25,6 @@
 #include <linux/spi/ads7846.h>
 #include <linux/platform_data/spi-omap2-mcspi.h>
-#include <linux/platform_data/mtd-nand-omap2.h>
 #include "common.h"
 #include "common-board-devices.h"
@@ -96,48 +95,3 @@ void __init omap_ads7846_init(int bus_num, int gpio_pendown, int gpio_debounce,
 {
 }
 #endif
-#if defined(CONFIG_MTD_NAND_OMAP2) || defined(CONFIG_MTD_NAND_OMAP2_MODULE)
-static struct omap_nand_platform_data nand_data;
-void __init omap_nand_flash_init(int options, struct mtd_partition *parts,
-                                 int nr_parts)
-{
-        u8 cs = 0;
-        u8 nandcs = GPMC_CS_NUM + 1;
-        /* find out the chip-select on which NAND exists */
-        while (cs < GPMC_CS_NUM) {
-                u32 ret = 0;
-                ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1);
-                if ((ret & 0xC00) == 0x800) {
-                        printk(KERN_INFO "Found NAND on CS%d\n", cs);
-                        if (nandcs > GPMC_CS_NUM)
-                                nandcs = cs;
-                }
-                cs++;
-        }
-        if (nandcs > GPMC_CS_NUM) {
-                pr_info("NAND: Unable to find configuration in GPMC\n");
-                return;
-        }
-        if (nandcs < GPMC_CS_NUM) {
-                nand_data.cs = nandcs;
-                nand_data.parts = parts;
-                nand_data.nr_parts = nr_parts;
-                nand_data.devsize = options;
-                printk(KERN_INFO "Registering NAND on CS%d\n", nandcs);
-                if (gpmc_nand_init(&nand_data) < 0)
-                        printk(KERN_ERR "Unable to register NAND device\n");
-        }
-}
-#else
-void __init omap_nand_flash_init(int options, struct mtd_partition *parts,
-                                 int nr_parts)
-{
-}
-#endif
diff --git a/arch/arm/mach-omap2/common-board-devices.h b/arch/arm/mach-omap2/common-board-devices.h
index a0b4a42836ab..72bb41b3fd25 100644
--- a/arch/arm/mach-omap2/common-board-devices.h
+++ b/arch/arm/mach-omap2/common-board-devices.h
@@ -10,6 +10,5 @@ struct ads7846_platform_data;
 void omap_ads7846_init(int bus_num, int gpio_pendown, int gpio_debounce,
                       struct ads7846_platform_data *board_pdata);
-void omap_nand_flash_init(int opts, struct mtd_partition *parts, int n_parts);
 #endif /* __OMAP_COMMON_BOARD_DEVICES__ */
diff --git a/arch/arm/mach-omap2/common.c b/arch/arm/mach-omap2/common.c
index 17950c6e130b..34fb5b95859b 100644
--- a/arch/arm/mach-omap2/common.c
+++ b/arch/arm/mach-omap2/common.c
@@ -16,14 +16,17 @@
 #include <linux/init.h>
 #include <linux/clk.h>
 #include <linux/io.h>
+#include <linux/platform_data/dsp-omap.h>
-#include <plat/clock.h>
+#include <plat/vram.h>
 #include "soc.h"
 #include "iomap.h"
 #include "common.h"
+#include "clock.h"
 #include "sdrc.h"
 #include "control.h"
+#include "omap-secure.h"
 /* Global address base setup code */
@@ -200,3 +203,20 @@ void __init omap5_map_io(void)
        omap5_map_common_io();
 }
 #endif
+/*
+ * Stub function for OMAP2 so that common files
+ * continue to build when custom builds are used
+ */
+int __weak omap_secure_ram_reserve_memblock(void)
+{
+        return 0;
+}
+void __init omap_reserve(void)
+{
+        omap_vram_reserve_sdram_memblock();
+        omap_dsp_reserve_sdram_memblock();
+        omap_secure_ram_reserve_memblock();
+        omap_barrier_reserve_memblock();
+}
diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h
index 7045e4d61ac3..d135d551d124 100644
--- a/arch/arm/mach-omap2/common.h
+++ b/arch/arm/mach-omap2/common.h
@@ -28,13 +28,17 @@
 #include <linux/irq.h>
 #include <linux/delay.h>
+#include <linux/i2c.h>
 #include <linux/i2c/twl.h>
+#include <linux/i2c-omap.h>
 #include <asm/proc-fns.h>
-#include <plat/cpu.h>
 #include <plat/serial.h>
-#include <plat/common.h>
+#include "../plat-omap/common.h"
+#include "i2c.h"
 #define OMAP_INTC_START         NR_IRQS
@@ -338,6 +342,7 @@ extern void omap_sdrc_init(struct omap_sdrc_params *sdrc_cs0,
                                      struct omap_sdrc_params *sdrc_cs1);
 struct omap2_hsmmc_info;
 extern int omap4_twl6030_hsmmc_init(struct omap2_hsmmc_info *controllers);
+extern void omap_reserve(void);
 #endif /* __ASSEMBLER__ */
 #endif /* __ARCH_ARM_MACH_OMAP2PLUS_COMMON_H */
diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c
index d1ff8399a222..bf2be5c5468d 100644
--- a/arch/arm/mach-omap2/control.c
+++ b/arch/arm/mach-omap2/control.c
@@ -1,7 +1,7 @@
 /*
 * OMAP2/3 System Control Module register access
 *
- * Copyright (C) 2007 Texas Instruments, Inc.
+ * Copyright (C) 2007, 2012 Texas Instruments, Inc.
 * Copyright (C) 2007 Nokia Corporation
 *
 * Written by Paul Walmsley
@@ -15,8 +15,6 @@
 #include <linux/kernel.h>
 #include <linux/io.h>
-#include <plat/sdrc.h>
 #include "soc.h"
 #include "iomap.h"
 #include "common.h"
diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
index cba60e05e32e..2ad491d6910b 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -23,10 +23,11 @@
 #include <asm/mach-types.h>
 #include <asm/mach/map.h>
+#include <plat-omap/dma-omap.h>
 #include "iomap.h"
-#include <plat/dma.h>
+#include "omap_hwmod.h"
-#include <plat/omap_hwmod.h>
+#include "omap_device.h"
-#include <plat/omap_device.h>
 #include "omap4-keypad.h"
 #include "soc.h"
@@ -34,6 +35,7 @@
 #include "mux.h"
 #include "control.h"
 #include "devices.h"
+#include "dma.h"
 #define L3_MODULES_MAX_LEN 12
 #define L3_MODULES 3
diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c
index 1011995f150a..89c57129357a 100644
--- a/arch/arm/mach-omap2/display.c
+++ b/arch/arm/mach-omap2/display.c
@@ -25,11 +25,12 @@
 #include <linux/delay.h>
 #include <video/omapdss.h>
-#include <plat/omap_hwmod.h>
+#include "omap_hwmod.h"
-#include <plat/omap_device.h>
+#include "omap_device.h"
-#include <plat/omap-pm.h>
+#include "omap-pm.h"
 #include "common.h"
+#include "soc.h"
 #include "iomap.h"
 #include "mux.h"
 #include "control.h"
@@ -284,6 +285,35 @@ err:
        return ERR_PTR(r);
 }
+static enum omapdss_version __init omap_display_get_version(void)
+{
+        if (cpu_is_omap24xx())
+                return OMAPDSS_VER_OMAP24xx;
+        else if (cpu_is_omap3630())
+                return OMAPDSS_VER_OMAP3630;
+        else if (cpu_is_omap34xx()) {
+                if (soc_is_am35xx()) {
+                        return OMAPDSS_VER_AM35xx;
+                } else {
+                        if (omap_rev() < OMAP3430_REV_ES3_0)
+                                return OMAPDSS_VER_OMAP34xx_ES1;
+                        else
+                                return OMAPDSS_VER_OMAP34xx_ES3;
+                }
+        } else if (omap_rev() == OMAP4430_REV_ES1_0)
+                return OMAPDSS_VER_OMAP4430_ES1;
+        else if (omap_rev() == OMAP4430_REV_ES2_0 ||
+                        omap_rev() == OMAP4430_REV_ES2_1 ||
+                        omap_rev() == OMAP4430_REV_ES2_2)
+                return OMAPDSS_VER_OMAP4430_ES2;
+        else if (cpu_is_omap44xx())
+                return OMAPDSS_VER_OMAP4;
+        else if (soc_is_omap54xx())
+                return OMAPDSS_VER_OMAP5;
+        else
+                return OMAPDSS_VER_UNKNOWN;
+}
 int __init omap_display_init(struct omap_dss_board_info *board_data)
 {
        int r = 0;
@@ -291,9 +321,18 @@ int __init omap_display_init(struct omap_dss_board_info *board_data)
        int i, oh_count;
        const struct omap_dss_hwmod_data *curr_dss_hwmod;
        struct platform_device *dss_pdev;
+        enum omapdss_version ver;
        /* create omapdss device */
+        ver = omap_display_get_version();
+        if (ver == OMAPDSS_VER_UNKNOWN) {
+                pr_err("DSS not supported on this SoC\n");
+                return -ENODEV;
+        }
+        board_data->version = ver;
        board_data->dsi_enable_pads = omap_dsi_enable_pads;
        board_data->dsi_disable_pads = omap_dsi_disable_pads;
        board_data->get_context_loss_count = omap_pm_get_dev_context_loss_count;
diff --git a/arch/arm/mach-omap2/dma.c b/arch/arm/mach-omap2/dma.c
index ff75abe60af2..b1926cd70468 100644
--- a/arch/arm/mach-omap2/dma.c
+++ b/arch/arm/mach-omap2/dma.c
@@ -28,9 +28,11 @@
 #include <linux/init.h>
 #include <linux/device.h>
-#include <plat/omap_hwmod.h>
+#include <plat-omap/dma-omap.h>
-#include <plat/omap_device.h>
-#include <plat/dma.h>
+#include "soc.h"
+#include "omap_hwmod.h"
+#include "omap_device.h"
 #define OMAP2_DMA_STRIDE        0x60
diff --git a/arch/arm/mach-omap2/dma.h b/arch/arm/mach-omap2/dma.h
new file mode 100644
index 000000000000..eba80dbc5218
--- /dev/null
+++ b/arch/arm/mach-omap2/dma.h
@@ -0,0 +1,131 @@
+/*
+ *  OMAP2PLUS DMA channel definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef __OMAP2PLUS_DMA_CHANNEL_H
+#define __OMAP2PLUS_DMA_CHANNEL_H
+/* DMA channels for 24xx */
+#define OMAP24XX_DMA_NO_DEVICE          0
+#define OMAP24XX_DMA_XTI_DMA            1       /* S_DMA_0 */
+#define OMAP24XX_DMA_EXT_DMAREQ0        2       /* S_DMA_1 */
+#define OMAP24XX_DMA_EXT_DMAREQ1        3       /* S_DMA_2 */
+#define OMAP24XX_DMA_GPMC               4       /* S_DMA_3 */
+#define OMAP24XX_DMA_GFX                5       /* S_DMA_4 */
+#define OMAP24XX_DMA_DSS                6       /* S_DMA_5 */
+#define OMAP242X_DMA_VLYNQ_TX           7       /* S_DMA_6 */
+#define OMAP24XX_DMA_EXT_DMAREQ2        7       /* S_DMA_6 */
+#define OMAP24XX_DMA_CWT                8       /* S_DMA_7 */
+#define OMAP24XX_DMA_AES_TX             9       /* S_DMA_8 */
+#define OMAP24XX_DMA_AES_RX             10      /* S_DMA_9 */
+#define OMAP24XX_DMA_DES_TX             11      /* S_DMA_10 */
+#define OMAP24XX_DMA_DES_RX             12      /* S_DMA_11 */
+#define OMAP24XX_DMA_SHA1MD5_RX         13      /* S_DMA_12 */
+#define OMAP34XX_DMA_SHA2MD5_RX         13      /* S_DMA_12 */
+#define OMAP242X_DMA_EXT_DMAREQ2        14      /* S_DMA_13 */
+#define OMAP242X_DMA_EXT_DMAREQ3        15      /* S_DMA_14 */
+#define OMAP242X_DMA_EXT_DMAREQ4        16      /* S_DMA_15 */
+#define OMAP242X_DMA_EAC_AC_RD          17      /* S_DMA_16 */
+#define OMAP242X_DMA_EAC_AC_WR          18      /* S_DMA_17 */
+#define OMAP242X_DMA_EAC_MD_UL_RD       19      /* S_DMA_18 */
+#define OMAP242X_DMA_EAC_MD_UL_WR       20      /* S_DMA_19 */
+#define OMAP242X_DMA_EAC_MD_DL_RD       21      /* S_DMA_20 */
+#define OMAP242X_DMA_EAC_MD_DL_WR       22      /* S_DMA_21 */
+#define OMAP242X_DMA_EAC_BT_UL_RD       23      /* S_DMA_22 */
+#define OMAP242X_DMA_EAC_BT_UL_WR       24      /* S_DMA_23 */
+#define OMAP242X_DMA_EAC_BT_DL_RD       25      /* S_DMA_24 */
+#define OMAP242X_DMA_EAC_BT_DL_WR       26      /* S_DMA_25 */
+#define OMAP243X_DMA_EXT_DMAREQ3        14      /* S_DMA_13 */
+#define OMAP24XX_DMA_SPI3_TX0           15      /* S_DMA_14 */
+#define OMAP24XX_DMA_SPI3_RX0           16      /* S_DMA_15 */
+#define OMAP24XX_DMA_MCBSP3_TX          17      /* S_DMA_16 */
+#define OMAP24XX_DMA_MCBSP3_RX          18      /* S_DMA_17 */
+#define OMAP24XX_DMA_MCBSP4_TX          19      /* S_DMA_18 */
+#define OMAP24XX_DMA_MCBSP4_RX          20      /* S_DMA_19 */
+#define OMAP24XX_DMA_MCBSP5_TX          21      /* S_DMA_20 */
+#define OMAP24XX_DMA_MCBSP5_RX          22      /* S_DMA_21 */
+#define OMAP24XX_DMA_SPI3_TX1           23      /* S_DMA_22 */
+#define OMAP24XX_DMA_SPI3_RX1           24      /* S_DMA_23 */
+#define OMAP243X_DMA_EXT_DMAREQ4        25      /* S_DMA_24 */
+#define OMAP243X_DMA_EXT_DMAREQ5        26      /* S_DMA_25 */
+#define OMAP34XX_DMA_I2C3_TX            25      /* S_DMA_24 */
+#define OMAP34XX_DMA_I2C3_RX            26      /* S_DMA_25 */
+#define OMAP24XX_DMA_I2C1_TX            27      /* S_DMA_26 */
+#define OMAP24XX_DMA_I2C1_RX            28      /* S_DMA_27 */
+#define OMAP24XX_DMA_I2C2_TX            29      /* S_DMA_28 */
+#define OMAP24XX_DMA_I2C2_RX            30      /* S_DMA_29 */
+#define OMAP24XX_DMA_MCBSP1_TX          31      /* S_DMA_30 */
+#define OMAP24XX_DMA_MCBSP1_RX          32      /* S_DMA_31 */
+#define OMAP24XX_DMA_MCBSP2_TX          33      /* S_DMA_32 */
+#define OMAP24XX_DMA_MCBSP2_RX          34      /* S_DMA_33 */
+#define OMAP24XX_DMA_SPI1_TX0           35      /* S_DMA_34 */
+#define OMAP24XX_DMA_SPI1_RX0           36      /* S_DMA_35 */
+#define OMAP24XX_DMA_SPI1_TX1           37      /* S_DMA_36 */
+#define OMAP24XX_DMA_SPI1_RX1           38      /* S_DMA_37 */
+#define OMAP24XX_DMA_SPI1_TX2           39      /* S_DMA_38 */
+#define OMAP24XX_DMA_SPI1_RX2           40      /* S_DMA_39 */
+#define OMAP24XX_DMA_SPI1_TX3           41      /* S_DMA_40 */
+#define OMAP24XX_DMA_SPI1_RX3           42      /* S_DMA_41 */
+#define OMAP24XX_DMA_SPI2_TX0           43      /* S_DMA_42 */
+#define OMAP24XX_DMA_SPI2_RX0           44      /* S_DMA_43 */
+#define OMAP24XX_DMA_SPI2_TX1           45      /* S_DMA_44 */
+#define OMAP24XX_DMA_SPI2_RX1           46      /* S_DMA_45 */
+#define OMAP24XX_DMA_MMC2_TX            47      /* S_DMA_46 */
+#define OMAP24XX_DMA_MMC2_RX            48      /* S_DMA_47 */
+#define OMAP24XX_DMA_UART1_TX           49      /* S_DMA_48 */
+#define OMAP24XX_DMA_UART1_RX           50      /* S_DMA_49 */
+#define OMAP24XX_DMA_UART2_TX           51      /* S_DMA_50 */
+#define OMAP24XX_DMA_UART2_RX           52      /* S_DMA_51 */
+#define OMAP24XX_DMA_UART3_TX           53      /* S_DMA_52 */
+#define OMAP24XX_DMA_UART3_RX           54      /* S_DMA_53 */
+#define OMAP24XX_DMA_USB_W2FC_TX0       55      /* S_DMA_54 */
+#define OMAP24XX_DMA_USB_W2FC_RX0       56      /* S_DMA_55 */
+#define OMAP24XX_DMA_USB_W2FC_TX1       57      /* S_DMA_56 */
+#define OMAP24XX_DMA_USB_W2FC_RX1       58      /* S_DMA_57 */
+#define OMAP24XX_DMA_USB_W2FC_TX2       59      /* S_DMA_58 */
+#define OMAP24XX_DMA_USB_W2FC_RX2       60      /* S_DMA_59 */
+#define OMAP24XX_DMA_MMC1_TX            61      /* S_DMA_60 */
+#define OMAP24XX_DMA_MMC1_RX            62      /* S_DMA_61 */
+#define OMAP24XX_DMA_MS                 63      /* S_DMA_62 */
+#define OMAP242X_DMA_EXT_DMAREQ5        64      /* S_DMA_63 */
+#define OMAP243X_DMA_EXT_DMAREQ6        64      /* S_DMA_63 */
+#define OMAP34XX_DMA_EXT_DMAREQ3        64      /* S_DMA_63 */
+#define OMAP34XX_DMA_AES2_TX            65      /* S_DMA_64 */
+#define OMAP34XX_DMA_AES2_RX            66      /* S_DMA_65 */
+#define OMAP34XX_DMA_DES2_TX            67      /* S_DMA_66 */
+#define OMAP34XX_DMA_DES2_RX            68      /* S_DMA_67 */
+#define OMAP34XX_DMA_SHA1MD5_RX         69      /* S_DMA_68 */
+#define OMAP34XX_DMA_SPI4_TX0           70      /* S_DMA_69 */
+#define OMAP34XX_DMA_SPI4_RX0           71      /* S_DMA_70 */
+#define OMAP34XX_DSS_DMA0               72      /* S_DMA_71 */
+#define OMAP34XX_DSS_DMA1               73      /* S_DMA_72 */
+#define OMAP34XX_DSS_DMA2               74      /* S_DMA_73 */
+#define OMAP34XX_DSS_DMA3               75      /* S_DMA_74 */
+#define OMAP34XX_DMA_MMC3_TX            77      /* S_DMA_76 */
+#define OMAP34XX_DMA_MMC3_RX            78      /* S_DMA_77 */
+#define OMAP34XX_DMA_USIM_TX            79      /* S_DMA_78 */
+#define OMAP34XX_DMA_USIM_RX            80      /* S_DMA_79 */
+#define OMAP36XX_DMA_UART4_TX           81      /* S_DMA_80 */
+#define OMAP36XX_DMA_UART4_RX           82      /* S_DMA_81 */
+/* Only for AM35xx */
+#define AM35XX_DMA_UART4_TX             54
+#define AM35XX_DMA_UART4_RX             55
+#endif /* __OMAP2PLUS_DMA_CHANNEL_H */
diff --git a/arch/arm/mach-omap2/dpll3xxx.c b/arch/arm/mach-omap2/dpll3xxx.c
index 814e1808e158..eacf51f2bc27 100644
--- a/arch/arm/mach-omap2/dpll3xxx.c
+++ b/arch/arm/mach-omap2/dpll3xxx.c
@@ -28,8 +28,6 @@
 #include <linux/bitops.h>
 #include <linux/clkdev.h>
-#include <plat/clock.h>
 #include "soc.h"
 #include "clock.h"
 #include "cm2xxx_3xxx.h"
diff --git a/arch/arm/mach-omap2/dpll44xx.c b/arch/arm/mach-omap2/dpll44xx.c
index 09d0ccccb861..5854da168a9c 100644
--- a/arch/arm/mach-omap2/dpll44xx.c
+++ b/arch/arm/mach-omap2/dpll44xx.c
@@ -15,8 +15,6 @@
 #include <linux/io.h>
 #include <linux/bitops.h>
-#include <plat/clock.h>
 #include "soc.h"
 #include "clock.h"
 #include "clock44xx.h"
diff --git a/arch/arm/mach-omap2/drm.c b/arch/arm/mach-omap2/drm.c
index 72e0f01b715c..6282cc826613 100644
--- a/arch/arm/mach-omap2/drm.c
+++ b/arch/arm/mach-omap2/drm.c
@@ -24,8 +24,8 @@
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
-#include <plat/omap_device.h>
+#include "omap_device.h"
-#include <plat/omap_hwmod.h>
+#include "omap_hwmod.h"
 #if defined(CONFIG_DRM_OMAP) || (CONFIG_DRM_OMAP_MODULE)
diff --git a/arch/arm/mach-omap2/dsp.c b/arch/arm/mach-omap2/dsp.c
index 98388109f22a..b155500e84a8 100644
--- a/arch/arm/mach-omap2/dsp.c
+++ b/arch/arm/mach-omap2/dsp.c
@@ -27,7 +27,7 @@
 #include "cm2xxx_3xxx.h"
 #include "prm2xxx_3xxx.h"
 #ifdef CONFIG_BRIDGE_DVFS
-#include <plat/omap-pm.h>
+#include "omap-pm.h"
 #endif
 #include <linux/platform_data/dsp-omap.h>
diff --git a/arch/arm/mach-omap2/gpio.c b/arch/arm/mach-omap2/gpio.c
index d1058f16fb40..399acabc3d0b 100644
--- a/arch/arm/mach-omap2/gpio.c
+++ b/arch/arm/mach-omap2/gpio.c
@@ -23,9 +23,9 @@
 #include <linux/of.h>
 #include <linux/platform_data/gpio-omap.h>
-#include <plat/omap_hwmod.h>
+#include "omap_hwmod.h"
-#include <plat/omap_device.h>
+#include "omap_device.h"
-#include <plat/omap-pm.h>
+#include "omap-pm.h"
 #include "powerdomain.h"
diff --git a/arch/arm/mach-omap2/gpmc-nand.c b/arch/arm/mach-omap2/gpmc-nand.c
index 4acf497faeb3..8607735b3ab3 100644
--- a/arch/arm/mach-omap2/gpmc-nand.c
+++ b/arch/arm/mach-omap2/gpmc-nand.c
@@ -17,9 +17,12 @@
 #include <asm/mach/flash.h>
-#include <plat/gpmc.h>
+#include "gpmc.h"
 #include "soc.h"
+#include "gpmc-nand.h"
+/* minimum size for IO mapping */
+#define NAND_IO_SIZE    4
 static struct resource gpmc_nand_resource[] = {
        {
@@ -40,41 +43,36 @@ static struct platform_device gpmc_nand_device = {
        .resource       = gpmc_nand_resource,
 };
-static int omap2_nand_gpmc_retime(struct omap_nand_platform_data *gpmc_nand_data)
+static int omap2_nand_gpmc_retime(
+                                struct omap_nand_platform_data *gpmc_nand_data,
+                                struct gpmc_timings *gpmc_t)
 {
        struct gpmc_timings t;
        int err;
-        if (!gpmc_nand_data->gpmc_t)
-                return 0;
        memset(&t, 0, sizeof(t));
-        t.sync_clk = gpmc_nand_data->gpmc_t->sync_clk;
+        t.sync_clk = gpmc_t->sync_clk;
-        t.cs_on = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->cs_on);
+        t.cs_on = gpmc_round_ns_to_ticks(gpmc_t->cs_on);
-        t.adv_on = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->adv_on);
+        t.adv_on = gpmc_round_ns_to_ticks(gpmc_t->adv_on);
        /* Read */
-        t.adv_rd_off = gpmc_round_ns_to_ticks(
+        t.adv_rd_off = gpmc_round_ns_to_ticks(gpmc_t->adv_rd_off);
-                                gpmc_nand_data->gpmc_t->adv_rd_off);
        t.oe_on  = t.adv_on;
-        t.access = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->access);
+        t.access = gpmc_round_ns_to_ticks(gpmc_t->access);
-        t.oe_off = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->oe_off);
+        t.oe_off = gpmc_round_ns_to_ticks(gpmc_t->oe_off);
-        t.cs_rd_off = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->cs_rd_off);
+        t.cs_rd_off = gpmc_round_ns_to_ticks(gpmc_t->cs_rd_off);
-        t.rd_cycle  = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->rd_cycle);
+        t.rd_cycle  = gpmc_round_ns_to_ticks(gpmc_t->rd_cycle);
        /* Write */
-        t.adv_wr_off = gpmc_round_ns_to_ticks(
+        t.adv_wr_off = gpmc_round_ns_to_ticks(gpmc_t->adv_wr_off);
-                                gpmc_nand_data->gpmc_t->adv_wr_off);
        t.we_on  = t.oe_on;
        if (cpu_is_omap34xx()) {
-            t.wr_data_mux_bus = gpmc_round_ns_to_ticks(
+            t.wr_data_mux_bus = gpmc_round_ns_to_ticks(gpmc_t->wr_data_mux_bus);
-                                gpmc_nand_data->gpmc_t->wr_data_mux_bus);
+            t.wr_access = gpmc_round_ns_to_ticks(gpmc_t->wr_access);
-            t.wr_access = gpmc_round_ns_to_ticks(
-                                gpmc_nand_data->gpmc_t->wr_access);
        }
-        t.we_off = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->we_off);
+        t.we_off = gpmc_round_ns_to_ticks(gpmc_t->we_off);
-        t.cs_wr_off = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->cs_wr_off);
+        t.cs_wr_off = gpmc_round_ns_to_ticks(gpmc_t->cs_wr_off);
-        t.wr_cycle  = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->wr_cycle);
+        t.wr_cycle  = gpmc_round_ns_to_ticks(gpmc_t->wr_cycle);
        /* Configure GPMC */
        if (gpmc_nand_data->devsize == NAND_BUSWIDTH_16)
@@ -91,7 +89,29 @@ static int omap2_nand_gpmc_retime(struct omap_nand_platform_data *gpmc_nand_data
        return 0;
 }
-int __init gpmc_nand_init(struct omap_nand_platform_data *gpmc_nand_data)
+static bool __init gpmc_hwecc_bch_capable(enum omap_ecc ecc_opt)
+{
+        /* support only OMAP3 class */
+        if (!cpu_is_omap34xx()) {
+                pr_err("BCH ecc is not supported on this CPU\n");
+                return 0;
+        }
+        /*
+         * For now, assume 4-bit mode is only supported on OMAP3630 ES1.x, x>=1.
+         * Other chips may be added if confirmed to work.
+         */
+        if ((ecc_opt == OMAP_ECC_BCH4_CODE_HW) &&
+            (!cpu_is_omap3630() || (GET_OMAP_REVISION() == 0))) {
+                pr_err("BCH 4-bit mode is not supported on this CPU\n");
+                return 0;
+        }
+        return 1;
+}
+int __init gpmc_nand_init(struct omap_nand_platform_data *gpmc_nand_data,
+                          struct gpmc_timings *gpmc_t)
 {
        int err = 0;
        struct device *dev = &gpmc_nand_device.dev;
@@ -112,11 +132,13 @@ int __init gpmc_nand_init(struct omap_nand_platform_data *gpmc_nand_data)
                                gpmc_get_client_irq(GPMC_IRQ_FIFOEVENTENABLE);
        gpmc_nand_resource[2].start =
                                gpmc_get_client_irq(GPMC_IRQ_COUNT_EVENT);
-         /* Set timings in GPMC */
-        err = omap2_nand_gpmc_retime(gpmc_nand_data);
+        if (gpmc_t) {
-        if (err < 0) {
+                err = omap2_nand_gpmc_retime(gpmc_nand_data, gpmc_t);
-                dev_err(dev, "Unable to set gpmc timings: %d\n", err);
+                if (err < 0) {
-                return err;
+                        dev_err(dev, "Unable to set gpmc timings: %d\n", err);
+                        return err;
+                }
        }
        /* Enable RD PIN Monitoring Reg */
@@ -126,6 +148,9 @@ int __init gpmc_nand_init(struct omap_nand_platform_data *gpmc_nand_data)
        gpmc_update_nand_reg(&gpmc_nand_data->reg, gpmc_nand_data->cs);
+        if (!gpmc_hwecc_bch_capable(gpmc_nand_data->ecc_opt))
+                return -EINVAL;
        err = platform_device_register(&gpmc_nand_device);
        if (err < 0) {
                dev_err(dev, "Unable to register NAND device\n");
diff --git a/arch/arm/mach-omap2/gpmc-nand.h b/arch/arm/mach-omap2/gpmc-nand.h
new file mode 100644
index 000000000000..d59e1281e851
--- /dev/null
+++ b/arch/arm/mach-omap2/gpmc-nand.h
@@ -0,0 +1,27 @@
+/*
+ *  arch/arm/mach-omap2/gpmc-nand.h
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ */
+#ifndef __OMAP2_GPMC_NAND_H
+#define __OMAP2_GPMC_NAND_H
+#include "gpmc.h"
+#include <linux/platform_data/mtd-nand-omap2.h>
+#if IS_ENABLED(CONFIG_MTD_NAND_OMAP2)
+extern int gpmc_nand_init(struct omap_nand_platform_data *d,
+                          struct gpmc_timings *gpmc_t);
+#else
+static inline int gpmc_nand_init(struct omap_nand_platform_data *d,
+                                 struct gpmc_timings *gpmc_t)
+{
+        return 0;
+}
+#endif
+#endif
diff --git a/arch/arm/mach-omap2/gpmc-onenand.c b/arch/arm/mach-omap2/gpmc-onenand.c
index 916716e1da3b..d102183ed9a5 100644
--- a/arch/arm/mach-omap2/gpmc-onenand.c
+++ b/arch/arm/mach-omap2/gpmc-onenand.c
@@ -16,15 +16,25 @@
 #include <linux/mtd/onenand_regs.h>
 #include <linux/io.h>
 #include <linux/platform_data/mtd-onenand-omap2.h>
+#include <linux/err.h>
 #include <asm/mach/flash.h>
-#include <plat/gpmc.h>
+#include "gpmc.h"
 #include "soc.h"
+#include "gpmc-onenand.h"
 #define ONENAND_IO_SIZE SZ_128K
+#define ONENAND_FLAG_SYNCREAD   (1 << 0)
+#define ONENAND_FLAG_SYNCWRITE  (1 << 1)
+#define ONENAND_FLAG_HF         (1 << 2)
+#define ONENAND_FLAG_VHF        (1 << 3)
+static unsigned onenand_flags;
+static unsigned latency;
+static int fclk_offset;
 static struct omap_onenand_platform_data *gpmc_onenand_data;
 static struct resource gpmc_onenand_resource = {
@@ -38,11 +48,9 @@ static struct platform_device gpmc_onenand_device = {
        .resource       = &gpmc_onenand_resource,
 };
-static int omap2_onenand_set_async_mode(int cs, void __iomem *onenand_base)
+static struct gpmc_timings omap2_onenand_calc_async_timings(void)
 {
        struct gpmc_timings t;
-        u32 reg;
-        int err;
        const int t_cer = 15;
        const int t_avdp = 12;
@@ -55,11 +63,6 @@ static int omap2_onenand_set_async_mode(int cs, void __iomem *onenand_base)
        const int t_wpl = 40;
        const int t_wph = 30;
-        /* Ensure sync read and sync write are disabled */
-        reg = readw(onenand_base + ONENAND_REG_SYS_CFG1);
-        reg &= ~ONENAND_SYS_CFG1_SYNC_READ & ~ONENAND_SYS_CFG1_SYNC_WRITE;
-        writew(reg, onenand_base + ONENAND_REG_SYS_CFG1);
        memset(&t, 0, sizeof(t));
        t.sync_clk = 0;
        t.cs_on = 0;
@@ -86,25 +89,30 @@ static int omap2_onenand_set_async_mode(int cs, void __iomem *onenand_base)
        t.cs_wr_off = t.we_off + gpmc_round_ns_to_ticks(t_wph);
        t.wr_cycle  = t.cs_wr_off + gpmc_round_ns_to_ticks(t_cez);
+        return t;
+}
+static int gpmc_set_async_mode(int cs, struct gpmc_timings *t)
+{
        /* Configure GPMC for asynchronous read */
        gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1,
                          GPMC_CONFIG1_DEVICESIZE_16 |
                          GPMC_CONFIG1_MUXADDDATA);
-        err = gpmc_cs_set_timings(cs, &t);
+        return gpmc_cs_set_timings(cs, t);
-        if (err)
+}
-                return err;
+static void omap2_onenand_set_async_mode(void __iomem *onenand_base)
+{
+        u32 reg;
        /* Ensure sync read and sync write are disabled */
        reg = readw(onenand_base + ONENAND_REG_SYS_CFG1);
        reg &= ~ONENAND_SYS_CFG1_SYNC_READ & ~ONENAND_SYS_CFG1_SYNC_WRITE;
        writew(reg, onenand_base + ONENAND_REG_SYS_CFG1);
-        return 0;
 }
-static void set_onenand_cfg(void __iomem *onenand_base, int latency,
+static void set_onenand_cfg(void __iomem *onenand_base)
-                                int sync_read, int sync_write, int hf, int vhf)
 {
        u32 reg;
@@ -112,19 +120,19 @@ static void set_onenand_cfg(void __iomem *onenand_base, int latency,
        reg &= ~((0x7 << ONENAND_SYS_CFG1_BRL_SHIFT) | (0x7 << 9));
        reg |=  (latency << ONENAND_SYS_CFG1_BRL_SHIFT) |
                ONENAND_SYS_CFG1_BL_16;
-        if (sync_read)
+        if (onenand_flags & ONENAND_FLAG_SYNCREAD)
                reg |= ONENAND_SYS_CFG1_SYNC_READ;
        else
                reg &= ~ONENAND_SYS_CFG1_SYNC_READ;
-        if (sync_write)
+        if (onenand_flags & ONENAND_FLAG_SYNCWRITE)
                reg |= ONENAND_SYS_CFG1_SYNC_WRITE;
        else
                reg &= ~ONENAND_SYS_CFG1_SYNC_WRITE;
-        if (hf)
+        if (onenand_flags & ONENAND_FLAG_HF)
                reg |= ONENAND_SYS_CFG1_HF;
        else
                reg &= ~ONENAND_SYS_CFG1_HF;
-        if (vhf)
+        if (onenand_flags & ONENAND_FLAG_VHF)
                reg |= ONENAND_SYS_CFG1_VHF;
        else
                reg &= ~ONENAND_SYS_CFG1_VHF;
@@ -132,21 +140,10 @@ static void set_onenand_cfg(void __iomem *onenand_base, int latency,
 }
 static int omap2_onenand_get_freq(struct omap_onenand_platform_data *cfg,
-                                  void __iomem *onenand_base, bool *clk_dep)
+                                  void __iomem *onenand_base)
 {
        u16 ver = readw(onenand_base + ONENAND_REG_VERSION_ID);
-        int freq = 0;
+        int freq;
-        if (cfg->get_freq) {
-                struct onenand_freq_info fi;
-                fi.maf_id = readw(onenand_base + ONENAND_REG_MANUFACTURER_ID);
-                fi.dev_id = readw(onenand_base + ONENAND_REG_DEVICE_ID);
-                fi.ver_id = ver;
-                freq = cfg->get_freq(&fi, clk_dep);
-                if (freq)
-                        return freq;
-        }
        switch ((ver >> 4) & 0xf) {
        case 0:
@@ -172,9 +169,9 @@ static int omap2_onenand_get_freq(struct omap_onenand_platform_data *cfg,
        return freq;
 }
-static int omap2_onenand_set_sync_mode(struct omap_onenand_platform_data *cfg,
+static struct gpmc_timings
-                                        void __iomem *onenand_base,
+omap2_onenand_calc_sync_timings(struct omap_onenand_platform_data *cfg,
-                                        int *freq_ptr)
+                                int freq)
 {
        struct gpmc_timings t;
        const int t_cer  = 15;
@@ -184,29 +181,15 @@ static int omap2_onenand_set_sync_mode(struct omap_onenand_platform_data *cfg,
        const int t_wpl  = 40;
        const int t_wph  = 30;
        int min_gpmc_clk_period, t_ces, t_avds, t_avdh, t_ach, t_aavdh, t_rdyo;
-        int div, fclk_offset_ns, fclk_offset, gpmc_clk_ns, latency;
-        int first_time = 0, hf = 0, vhf = 0, sync_read = 0, sync_write = 0;
-        int err, ticks_cez;
-        int cs = cfg->cs, freq = *freq_ptr;
        u32 reg;
-        bool clk_dep = false;
+        int div, fclk_offset_ns, gpmc_clk_ns;
+        int ticks_cez;
+        int cs = cfg->cs;
-        if (cfg->flags & ONENAND_SYNC_READ) {
+        if (cfg->flags & ONENAND_SYNC_READ)
-                sync_read = 1;
+                onenand_flags = ONENAND_FLAG_SYNCREAD;
-        } else if (cfg->flags & ONENAND_SYNC_READWRITE) {
+        else if (cfg->flags & ONENAND_SYNC_READWRITE)
-                sync_read = 1;
+                onenand_flags = ONENAND_FLAG_SYNCREAD | ONENAND_FLAG_SYNCWRITE;
-                sync_write = 1;
-        } else
-                return omap2_onenand_set_async_mode(cs, onenand_base);
-        if (!freq) {
-                /* Very first call freq is not known */
-                err = omap2_onenand_set_async_mode(cs, onenand_base);
-                if (err)
-                        return err;
-                freq = omap2_onenand_get_freq(cfg, onenand_base, &clk_dep);
-                first_time = 1;
-        }
        switch (freq) {
        case 104:
@@ -244,44 +227,31 @@ static int omap2_onenand_set_sync_mode(struct omap_onenand_platform_data *cfg,
                t_ach   = 9;
                t_aavdh = 7;
                t_rdyo  = 15;
-                sync_write = 0;
+                onenand_flags &= ~ONENAND_FLAG_SYNCWRITE;
                break;
        }
-        div = gpmc_cs_calc_divider(cs, min_gpmc_clk_period);
+        div = gpmc_calc_divider(min_gpmc_clk_period);
        gpmc_clk_ns = gpmc_ticks_to_ns(div);
        if (gpmc_clk_ns < 15) /* >66Mhz */
-                hf = 1;
+                onenand_flags |= ONENAND_FLAG_HF;
+        else
+                onenand_flags &= ~ONENAND_FLAG_HF;
        if (gpmc_clk_ns < 12) /* >83Mhz */
-                vhf = 1;
+                onenand_flags |= ONENAND_FLAG_VHF;
-        if (vhf)
+        else
+                onenand_flags &= ~ONENAND_FLAG_VHF;
+        if (onenand_flags & ONENAND_FLAG_VHF)
                latency = 8;
-        else if (hf)
+        else if (onenand_flags & ONENAND_FLAG_HF)
                latency = 6;
        else if (gpmc_clk_ns >= 25) /* 40 MHz*/
                latency = 3;
        else
                latency = 4;
-        if (clk_dep) {
+        /* Set synchronous read timings */
-                if (gpmc_clk_ns < 12) { /* >83Mhz */
+        memset(&t, 0, sizeof(t));
-                        t_ces   = 3;
-                        t_avds  = 4;
-                } else if (gpmc_clk_ns < 15) { /* >66Mhz */
-                        t_ces   = 5;
-                        t_avds  = 4;
-                } else if (gpmc_clk_ns < 25) { /* >40Mhz */
-                        t_ces   = 6;
-                        t_avds  = 5;
-                } else {
-                        t_ces   = 7;
-                        t_avds  = 7;
-                }
-        }
-        if (first_time)
-                set_onenand_cfg(onenand_base, latency,
-                                        sync_read, sync_write, hf, vhf);
        if (div == 1) {
                reg = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG2);
@@ -307,8 +277,6 @@ static int omap2_onenand_set_sync_mode(struct omap_onenand_platform_data *cfg,
                gpmc_cs_write_reg(cs, GPMC_CS_CONFIG4, reg);
        }
-        /* Set synchronous read timings */
-        memset(&t, 0, sizeof(t));
        t.sync_clk = min_gpmc_clk_period;
        t.cs_on = 0;
        t.adv_on = 0;
@@ -330,7 +298,7 @@ static int omap2_onenand_set_sync_mode(struct omap_onenand_platform_data *cfg,
                     ticks_cez);
        /* Write */
-        if (sync_write) {
+        if (onenand_flags & ONENAND_FLAG_SYNCWRITE) {
                t.adv_wr_off = t.adv_rd_off;
                t.we_on  = 0;
                t.we_off = t.cs_rd_off;
@@ -355,6 +323,14 @@ static int omap2_onenand_set_sync_mode(struct omap_onenand_platform_data *cfg,
                }
        }
+        return t;
+}
+static int gpmc_set_sync_mode(int cs, struct gpmc_timings *t)
+{
+        unsigned sync_read = onenand_flags & ONENAND_FLAG_SYNCREAD;
+        unsigned sync_write = onenand_flags & ONENAND_FLAG_SYNCWRITE;
        /* Configure GPMC for synchronous read */
        gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1,
                          GPMC_CONFIG1_WRAPBURST_SUPP |
@@ -371,11 +347,45 @@ static int omap2_onenand_set_sync_mode(struct omap_onenand_platform_data *cfg,
                          GPMC_CONFIG1_DEVICETYPE_NOR |
                          GPMC_CONFIG1_MUXADDDATA);
-        err = gpmc_cs_set_timings(cs, &t);
+        return gpmc_cs_set_timings(cs, t);
-        if (err)
+}
-                return err;
+static int omap2_onenand_setup_async(void __iomem *onenand_base)
+{
+        struct gpmc_timings t;
+        int ret;
+        omap2_onenand_set_async_mode(onenand_base);
-        set_onenand_cfg(onenand_base, latency, sync_read, sync_write, hf, vhf);
+        t = omap2_onenand_calc_async_timings();
+        ret = gpmc_set_async_mode(gpmc_onenand_data->cs, &t);
+        if (IS_ERR_VALUE(ret))
+                return ret;
+        omap2_onenand_set_async_mode(onenand_base);
+        return 0;
+}
+static int omap2_onenand_setup_sync(void __iomem *onenand_base, int *freq_ptr)
+{
+        int ret, freq = *freq_ptr;
+        struct gpmc_timings t;
+        if (!freq) {
+                /* Very first call freq is not known */
+                freq = omap2_onenand_get_freq(gpmc_onenand_data, onenand_base);
+                set_onenand_cfg(onenand_base);
+        }
+        t = omap2_onenand_calc_sync_timings(gpmc_onenand_data, freq);
+        ret = gpmc_set_sync_mode(gpmc_onenand_data->cs, &t);
+        if (IS_ERR_VALUE(ret))
+                return ret;
+        set_onenand_cfg(onenand_base);
        *freq_ptr = freq;
@@ -385,15 +395,22 @@ static int omap2_onenand_set_sync_mode(struct omap_onenand_platform_data *cfg,
 static int gpmc_onenand_setup(void __iomem *onenand_base, int *freq_ptr)
 {
        struct device *dev = &gpmc_onenand_device.dev;
+        unsigned l = ONENAND_SYNC_READ | ONENAND_SYNC_READWRITE;
+        int ret;
-        /* Set sync timings in GPMC */
+        ret = omap2_onenand_setup_async(onenand_base);
-        if (omap2_onenand_set_sync_mode(gpmc_onenand_data, onenand_base,
+        if (ret) {
-                        freq_ptr) < 0) {
+                dev_err(dev, "unable to set to async mode\n");
-                dev_err(dev, "Unable to set synchronous mode\n");
+                return ret;
-                return -EINVAL;
        }
-        return 0;
+        if (!(gpmc_onenand_data->flags & l))
+                return 0;
+        ret = omap2_onenand_setup_sync(onenand_base, freq_ptr);
+        if (ret)
+                dev_err(dev, "unable to set to sync mode\n");
+        return ret;
 }
 void __init gpmc_onenand_init(struct omap_onenand_platform_data *_onenand_data)
@@ -411,6 +428,11 @@ void __init gpmc_onenand_init(struct omap_onenand_platform_data *_onenand_data)
                gpmc_onenand_data->flags |= ONENAND_SYNC_READ;
        }
+        if (cpu_is_omap34xx())
+                gpmc_onenand_data->flags |= ONENAND_IN_OMAP34XX;
+        else
+                gpmc_onenand_data->flags &= ~ONENAND_IN_OMAP34XX;
        err = gpmc_cs_request(gpmc_onenand_data->cs, ONENAND_IO_SIZE,
                                (unsigned long *)&gpmc_onenand_resource.start);
        if (err < 0) {
diff --git a/arch/arm/mach-omap2/gpmc-onenand.h b/arch/arm/mach-omap2/gpmc-onenand.h
new file mode 100644
index 000000000000..216f23a8b45c
--- /dev/null
+++ b/arch/arm/mach-omap2/gpmc-onenand.h
@@ -0,0 +1,24 @@
+/*
+ *  arch/arm/mach-omap2/gpmc-onenand.h
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ */
+#ifndef __OMAP2_GPMC_ONENAND_H
+#define __OMAP2_GPMC_ONENAND_H
+#include <linux/platform_data/mtd-onenand-omap2.h>
+#if IS_ENABLED(CONFIG_MTD_ONENAND_OMAP2)
+extern void gpmc_onenand_init(struct omap_onenand_platform_data *d);
+#else
+#define board_onenand_data      NULL
+static inline void gpmc_onenand_init(struct omap_onenand_platform_data *d)
+{
+}
+#endif
+#endif
diff --git a/arch/arm/mach-omap2/gpmc-smc91x.c b/arch/arm/mach-omap2/gpmc-smc91x.c
index 565475310374..6eed907d594c 100644
--- a/arch/arm/mach-omap2/gpmc-smc91x.c
+++ b/arch/arm/mach-omap2/gpmc-smc91x.c
@@ -17,7 +17,7 @@
 #include <linux/io.h>
 #include <linux/smc91x.h>
-#include <plat/gpmc.h>
+#include "gpmc.h"
 #include "gpmc-smc91x.h"
 #include "soc.h"
diff --git a/arch/arm/mach-omap2/gpmc-smsc911x.c b/arch/arm/mach-omap2/gpmc-smsc911x.c
index 249a0b440cd6..ef990118d32b 100644
--- a/arch/arm/mach-omap2/gpmc-smsc911x.c
+++ b/arch/arm/mach-omap2/gpmc-smsc911x.c
@@ -20,7 +20,7 @@
 #include <linux/io.h>
 #include <linux/smsc911x.h>
-#include <plat/gpmc.h>
+#include "gpmc.h"
 #include "gpmc-smsc911x.h"
 static struct resource gpmc_smsc911x_resources[] = {
diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c
index 92b5718fa722..bf6117c32f4b 100644
--- a/arch/arm/mach-omap2/gpmc.c
+++ b/arch/arm/mach-omap2/gpmc.c
@@ -26,16 +26,14 @@
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
-#include <asm/mach-types.h>
+#include <linux/platform_data/mtd-nand-omap2.h>
-#include <plat/gpmc.h>
-#include <plat/cpu.h>
+#include <asm/mach-types.h>
-#include <plat/gpmc.h>
-#include <plat/sdrc.h>
-#include <plat/omap_device.h>
 #include "soc.h"
 #include "common.h"
+#include "omap_device.h"
+#include "gpmc.h"
 #define DEVICE_NAME             "omap-gpmc"
@@ -59,6 +57,9 @@
 #define GPMC_ECC_SIZE_CONFIG    0x1fc
 #define GPMC_ECC1_RESULT        0x200
 #define GPMC_ECC_BCH_RESULT_0   0x240   /* not available on OMAP2 */
+#define GPMC_ECC_BCH_RESULT_1   0x244   /* not available on OMAP2 */
+#define GPMC_ECC_BCH_RESULT_2   0x248   /* not available on OMAP2 */
+#define GPMC_ECC_BCH_RESULT_3   0x24c   /* not available on OMAP2 */
 /* GPMC ECC control settings */
 #define GPMC_ECC_CTRL_ECCCLEAR          0x100
@@ -75,6 +76,7 @@
 #define GPMC_CS0_OFFSET         0x60
 #define GPMC_CS_SIZE            0x30
+#define GPMC_BCH_SIZE           0x10
 #define GPMC_MEM_START          0x00000000
 #define GPMC_MEM_END            0x3FFFFFFF
@@ -137,7 +139,6 @@ static struct resource	gpmc_mem_root;
 static struct resource  gpmc_cs_mem[GPMC_CS_NUM];
 static DEFINE_SPINLOCK(gpmc_mem_lock);
 static unsigned int gpmc_cs_map;        /* flag for cs which are initialized */
-static int gpmc_ecc_used = -EINVAL;     /* cs using ecc engine */
 static struct device *gpmc_dev;
 static int gpmc_irq;
 static resource_size_t phys_base, mem_size;
@@ -158,22 +159,6 @@ static u32 gpmc_read_reg(int idx)
        return __raw_readl(gpmc_base + idx);
 }
-static void gpmc_cs_write_byte(int cs, int idx, u8 val)
-{
-        void __iomem *reg_addr;
-        reg_addr = gpmc_base + GPMC_CS0_OFFSET + (cs * GPMC_CS_SIZE) + idx;
-        __raw_writeb(val, reg_addr);
-}
-static u8 gpmc_cs_read_byte(int cs, int idx)
-{
-        void __iomem *reg_addr;
-        reg_addr = gpmc_base + GPMC_CS0_OFFSET + (cs * GPMC_CS_SIZE) + idx;
-        return __raw_readb(reg_addr);
-}
 void gpmc_cs_write_reg(int cs, int idx, u32 val)
 {
        void __iomem *reg_addr;
@@ -288,7 +273,7 @@ static int set_gpmc_timing_reg(int cs, int reg, int st_bit, int end_bit,
                return -1
 #endif
-int gpmc_cs_calc_divider(int cs, unsigned int sync_clk)
+int gpmc_calc_divider(unsigned int sync_clk)
 {
        int div;
        u32 l;
@@ -308,7 +293,7 @@ int gpmc_cs_set_timings(int cs, const struct gpmc_timings *t)
        int div;
        u32 l;
-        div = gpmc_cs_calc_divider(cs, t->sync_clk);
+        div = gpmc_calc_divider(t->sync_clk);
        if (div < 0)
                return div;
@@ -509,44 +494,6 @@ void gpmc_cs_free(int cs)
 EXPORT_SYMBOL(gpmc_cs_free);
 /**
- * gpmc_read_status - read access request to get the different gpmc status
- * @cmd: command type
- * @return status
- */
-int gpmc_read_status(int cmd)
-{
-        int     status = -EINVAL;
-        u32     regval = 0;
-        switch (cmd) {
-        case GPMC_GET_IRQ_STATUS:
-                status = gpmc_read_reg(GPMC_IRQSTATUS);
-                break;
-        case GPMC_PREFETCH_FIFO_CNT:
-                regval = gpmc_read_reg(GPMC_PREFETCH_STATUS);
-                status = GPMC_PREFETCH_STATUS_FIFO_CNT(regval);
-                break;
-        case GPMC_PREFETCH_COUNT:
-                regval = gpmc_read_reg(GPMC_PREFETCH_STATUS);
-                status = GPMC_PREFETCH_STATUS_COUNT(regval);
-                break;
-        case GPMC_STATUS_BUFFER:
-                regval = gpmc_read_reg(GPMC_STATUS);
-                /* 1 : buffer is available to write */
-                status = regval & GPMC_STATUS_BUFF_EMPTY;
-                break;
-        default:
-                printk(KERN_ERR "gpmc_read_status: Not supported\n");
-        }
-        return status;
-}
-EXPORT_SYMBOL(gpmc_read_status);
-/**
 * gpmc_cs_configure - write request to configure gpmc
 * @cs: chip select number
 * @cmd: command type
@@ -614,121 +561,10 @@ int gpmc_cs_configure(int cs, int cmd, int wval)
 }
 EXPORT_SYMBOL(gpmc_cs_configure);
-/**
- * gpmc_nand_read - nand specific read access request
- * @cs: chip select number
- * @cmd: command type
- */
-int gpmc_nand_read(int cs, int cmd)
-{
-        int rval = -EINVAL;
-        switch (cmd) {
-        case GPMC_NAND_DATA:
-                rval = gpmc_cs_read_byte(cs, GPMC_CS_NAND_DATA);
-                break;
-        default:
-                printk(KERN_ERR "gpmc_read_nand_ctrl: Not supported\n");
-        }
-        return rval;
-}
-EXPORT_SYMBOL(gpmc_nand_read);
-/**
- * gpmc_nand_write - nand specific write request
- * @cs: chip select number
- * @cmd: command type
- * @wval: value to write
- */
-int gpmc_nand_write(int cs, int cmd, int wval)
-{
-        int err = 0;
-        switch (cmd) {
-        case GPMC_NAND_COMMAND:
-                gpmc_cs_write_byte(cs, GPMC_CS_NAND_COMMAND, wval);
-                break;
-        case GPMC_NAND_ADDRESS:
-                gpmc_cs_write_byte(cs, GPMC_CS_NAND_ADDRESS, wval);
-                break;
-        case GPMC_NAND_DATA:
-                gpmc_cs_write_byte(cs, GPMC_CS_NAND_DATA, wval);
-        default:
-                printk(KERN_ERR "gpmc_write_nand_ctrl: Not supported\n");
-                err = -EINVAL;
-        }
-        return err;
-}
-EXPORT_SYMBOL(gpmc_nand_write);
-/**
- * gpmc_prefetch_enable - configures and starts prefetch transfer
- * @cs: cs (chip select) number
- * @fifo_th: fifo threshold to be used for read/ write
- * @dma_mode: dma mode enable (1) or disable (0)
- * @u32_count: number of bytes to be transferred
- * @is_write: prefetch read(0) or write post(1) mode
- */
-int gpmc_prefetch_enable(int cs, int fifo_th, int dma_mode,
-                                unsigned int u32_count, int is_write)
-{
-        if (fifo_th > PREFETCH_FIFOTHRESHOLD_MAX) {
-                pr_err("gpmc: fifo threshold is not supported\n");
-                return -1;
-        } else if (!(gpmc_read_reg(GPMC_PREFETCH_CONTROL))) {
-                /* Set the amount of bytes to be prefetched */
-                gpmc_write_reg(GPMC_PREFETCH_CONFIG2, u32_count);
-                /* Set dma/mpu mode, the prefetch read / post write and
-                 * enable the engine. Set which cs is has requested for.
-                 */
-                gpmc_write_reg(GPMC_PREFETCH_CONFIG1, ((cs << CS_NUM_SHIFT) |
-                                        PREFETCH_FIFOTHRESHOLD(fifo_th) |
-                                        ENABLE_PREFETCH |
-                                        (dma_mode << DMA_MPU_MODE) |
-                                        (0x1 & is_write)));
-                /*  Start the prefetch engine */
-                gpmc_write_reg(GPMC_PREFETCH_CONTROL, 0x1);
-        } else {
-                return -EBUSY;
-        }
-        return 0;
-}
-EXPORT_SYMBOL(gpmc_prefetch_enable);
-/**
- * gpmc_prefetch_reset - disables and stops the prefetch engine
- */
-int gpmc_prefetch_reset(int cs)
-{
-        u32 config1;
-        /* check if the same module/cs is trying to reset */
-        config1 = gpmc_read_reg(GPMC_PREFETCH_CONFIG1);
-        if (((config1 >> CS_NUM_SHIFT) & 0x7) != cs)
-                return -EINVAL;
-        /* Stop the PFPW engine */
-        gpmc_write_reg(GPMC_PREFETCH_CONTROL, 0x0);
-        /* Reset/disable the PFPW engine */
-        gpmc_write_reg(GPMC_PREFETCH_CONFIG1, 0x0);
-        return 0;
-}
-EXPORT_SYMBOL(gpmc_prefetch_reset);
 void gpmc_update_nand_reg(struct gpmc_nand_regs *reg, int cs)
 {
+        int i;
        reg->gpmc_status = gpmc_base + GPMC_STATUS;
        reg->gpmc_nand_command = gpmc_base + GPMC_CS0_OFFSET +
                                GPMC_CS_NAND_COMMAND + GPMC_CS_SIZE * cs;
@@ -744,7 +580,17 @@ void gpmc_update_nand_reg(struct gpmc_nand_regs *reg, int cs)
        reg->gpmc_ecc_control = gpmc_base + GPMC_ECC_CONTROL;
        reg->gpmc_ecc_size_config = gpmc_base + GPMC_ECC_SIZE_CONFIG;
        reg->gpmc_ecc1_result = gpmc_base + GPMC_ECC1_RESULT;
-        reg->gpmc_bch_result0 = gpmc_base + GPMC_ECC_BCH_RESULT_0;
+        for (i = 0; i < GPMC_BCH_NUM_REMAINDER; i++) {
+                reg->gpmc_bch_result0[i] = gpmc_base + GPMC_ECC_BCH_RESULT_0 +
+                                           GPMC_BCH_SIZE * i;
+                reg->gpmc_bch_result1[i] = gpmc_base + GPMC_ECC_BCH_RESULT_1 +
+                                           GPMC_BCH_SIZE * i;
+                reg->gpmc_bch_result2[i] = gpmc_base + GPMC_ECC_BCH_RESULT_2 +
+                                           GPMC_BCH_SIZE * i;
+                reg->gpmc_bch_result3[i] = gpmc_base + GPMC_ECC_BCH_RESULT_3 +
+                                           GPMC_BCH_SIZE * i;
+        }
 }
 int gpmc_get_client_irq(unsigned irq_config)
@@ -1093,267 +939,3 @@ void omap3_gpmc_restore_context(void)
        }
 }
 #endif /* CONFIG_ARCH_OMAP3 */
-/**
- * gpmc_enable_hwecc - enable hardware ecc functionality
- * @cs: chip select number
- * @mode: read/write mode
- * @dev_width: device bus width(1 for x16, 0 for x8)
- * @ecc_size: bytes for which ECC will be generated
- */
-int gpmc_enable_hwecc(int cs, int mode, int dev_width, int ecc_size)
-{
-        unsigned int val;
-        /* check if ecc module is in used */
-        if (gpmc_ecc_used != -EINVAL)
-                return -EINVAL;
-        gpmc_ecc_used = cs;
-        /* clear ecc and enable bits */
-        gpmc_write_reg(GPMC_ECC_CONTROL,
-                        GPMC_ECC_CTRL_ECCCLEAR |
-                        GPMC_ECC_CTRL_ECCREG1);
-        /* program ecc and result sizes */
-        val = ((((ecc_size >> 1) - 1) << 22) | (0x0000000F));
-        gpmc_write_reg(GPMC_ECC_SIZE_CONFIG, val);
-        switch (mode) {
-        case GPMC_ECC_READ:
-        case GPMC_ECC_WRITE:
-                gpmc_write_reg(GPMC_ECC_CONTROL,
-                                GPMC_ECC_CTRL_ECCCLEAR |
-                                GPMC_ECC_CTRL_ECCREG1);
-                break;
-        case GPMC_ECC_READSYN:
-                gpmc_write_reg(GPMC_ECC_CONTROL,
-                                GPMC_ECC_CTRL_ECCCLEAR |
-                                GPMC_ECC_CTRL_ECCDISABLE);
-                break;
-        default:
-                printk(KERN_INFO "Error: Unrecognized Mode[%d]!\n", mode);
-                break;
-        }
-        /* (ECC 16 or 8 bit col) | ( CS  )  | ECC Enable */
-        val = (dev_width << 7) | (cs << 1) | (0x1);
-        gpmc_write_reg(GPMC_ECC_CONFIG, val);
-        return 0;
-}
-EXPORT_SYMBOL_GPL(gpmc_enable_hwecc);
-/**
- * gpmc_calculate_ecc - generate non-inverted ecc bytes
- * @cs: chip select number
- * @dat: data pointer over which ecc is computed
- * @ecc_code: ecc code buffer
- *
- * Using non-inverted ECC is considered ugly since writing a blank
- * page (padding) will clear the ECC bytes. This is not a problem as long
- * no one is trying to write data on the seemingly unused page. Reading
- * an erased page will produce an ECC mismatch between generated and read
- * ECC bytes that has to be dealt with separately.
- */
-int gpmc_calculate_ecc(int cs, const u_char *dat, u_char *ecc_code)
-{
-        unsigned int val = 0x0;
-        if (gpmc_ecc_used != cs)
-                return -EINVAL;
-        /* read ecc result */
-        val = gpmc_read_reg(GPMC_ECC1_RESULT);
-        *ecc_code++ = val;          /* P128e, ..., P1e */
-        *ecc_code++ = val >> 16;    /* P128o, ..., P1o */
-        /* P2048o, P1024o, P512o, P256o, P2048e, P1024e, P512e, P256e */
-        *ecc_code++ = ((val >> 8) & 0x0f) | ((val >> 20) & 0xf0);
-        gpmc_ecc_used = -EINVAL;
-        return 0;
-}
-EXPORT_SYMBOL_GPL(gpmc_calculate_ecc);
-#ifdef CONFIG_ARCH_OMAP3
-/**
- * gpmc_init_hwecc_bch - initialize hardware BCH ecc functionality
- * @cs: chip select number
- * @nsectors: how many 512-byte sectors to process
- * @nerrors: how many errors to correct per sector (4 or 8)
- *
- * This function must be executed before any call to gpmc_enable_hwecc_bch.
- */
-int gpmc_init_hwecc_bch(int cs, int nsectors, int nerrors)
-{
-        /* check if ecc module is in use */
-        if (gpmc_ecc_used != -EINVAL)
-                return -EINVAL;
-        /* support only OMAP3 class */
-        if (!cpu_is_omap34xx()) {
-                printk(KERN_ERR "BCH ecc is not supported on this CPU\n");
-                return -EINVAL;
-        }
-        /*
-         * For now, assume 4-bit mode is only supported on OMAP3630 ES1.x, x>=1.
-         * Other chips may be added if confirmed to work.
-         */
-        if ((nerrors == 4) &&
-            (!cpu_is_omap3630() || (GET_OMAP_REVISION() == 0))) {
-                printk(KERN_ERR "BCH 4-bit mode is not supported on this CPU\n");
-                return -EINVAL;
-        }
-        /* sanity check */
-        if (nsectors > 8) {
-                printk(KERN_ERR "BCH cannot process %d sectors (max is 8)\n",
-                       nsectors);
-                return -EINVAL;
-        }
-        return 0;
-}
-EXPORT_SYMBOL_GPL(gpmc_init_hwecc_bch);
-/**
- * gpmc_enable_hwecc_bch - enable hardware BCH ecc functionality
- * @cs: chip select number
- * @mode: read/write mode
- * @dev_width: device bus width(1 for x16, 0 for x8)
- * @nsectors: how many 512-byte sectors to process
- * @nerrors: how many errors to correct per sector (4 or 8)
- */
-int gpmc_enable_hwecc_bch(int cs, int mode, int dev_width, int nsectors,
-                          int nerrors)
-{
-        unsigned int val;
-        /* check if ecc module is in use */
-        if (gpmc_ecc_used != -EINVAL)
-                return -EINVAL;
-        gpmc_ecc_used = cs;
-        /* clear ecc and enable bits */
-        gpmc_write_reg(GPMC_ECC_CONTROL, 0x1);
-        /*
-         * When using BCH, sector size is hardcoded to 512 bytes.
-         * Here we are using wrapping mode 6 both for reading and writing, with:
-         *  size0 = 0  (no additional protected byte in spare area)
-         *  size1 = 32 (skip 32 nibbles = 16 bytes per sector in spare area)
-         */
-        gpmc_write_reg(GPMC_ECC_SIZE_CONFIG, (32 << 22) | (0 << 12));
-        /* BCH configuration */
-        val = ((1                        << 16) | /* enable BCH */
-               (((nerrors == 8) ? 1 : 0) << 12) | /* 8 or 4 bits */
-               (0x06                     <<  8) | /* wrap mode = 6 */
-               (dev_width                <<  7) | /* bus width */
-               (((nsectors-1) & 0x7)     <<  4) | /* number of sectors */
-               (cs                       <<  1) | /* ECC CS */
-               (0x1));                            /* enable ECC */
-        gpmc_write_reg(GPMC_ECC_CONFIG, val);
-        gpmc_write_reg(GPMC_ECC_CONTROL, 0x101);
-        return 0;
-}
-EXPORT_SYMBOL_GPL(gpmc_enable_hwecc_bch);
-/**
- * gpmc_calculate_ecc_bch4 - Generate 7 ecc bytes per sector of 512 data bytes
- * @cs:  chip select number
- * @dat: The pointer to data on which ecc is computed
- * @ecc: The ecc output buffer
- */
-int gpmc_calculate_ecc_bch4(int cs, const u_char *dat, u_char *ecc)
-{
-        int i;
-        unsigned long nsectors, reg, val1, val2;
-        if (gpmc_ecc_used != cs)
-                return -EINVAL;
-        nsectors = ((gpmc_read_reg(GPMC_ECC_CONFIG) >> 4) & 0x7) + 1;
-        for (i = 0; i < nsectors; i++) {
-                reg = GPMC_ECC_BCH_RESULT_0 + 16*i;
-                /* Read hw-computed remainder */
-                val1 = gpmc_read_reg(reg + 0);
-                val2 = gpmc_read_reg(reg + 4);
-                /*
-                 * Add constant polynomial to remainder, in order to get an ecc
-                 * sequence of 0xFFs for a buffer filled with 0xFFs; and
-                 * left-justify the resulting polynomial.
-                 */
-                *ecc++ = 0x28 ^ ((val2 >> 12) & 0xFF);
-                *ecc++ = 0x13 ^ ((val2 >>  4) & 0xFF);
-                *ecc++ = 0xcc ^ (((val2 & 0xF) << 4)|((val1 >> 28) & 0xF));
-                *ecc++ = 0x39 ^ ((val1 >> 20) & 0xFF);
-                *ecc++ = 0x96 ^ ((val1 >> 12) & 0xFF);
-                *ecc++ = 0xac ^ ((val1 >> 4) & 0xFF);
-                *ecc++ = 0x7f ^ ((val1 & 0xF) << 4);
-        }
-        gpmc_ecc_used = -EINVAL;
-        return 0;
-}
-EXPORT_SYMBOL_GPL(gpmc_calculate_ecc_bch4);
-/**
- * gpmc_calculate_ecc_bch8 - Generate 13 ecc bytes per block of 512 data bytes
- * @cs:  chip select number
- * @dat: The pointer to data on which ecc is computed
- * @ecc: The ecc output buffer
- */
-int gpmc_calculate_ecc_bch8(int cs, const u_char *dat, u_char *ecc)
-{
-        int i;
-        unsigned long nsectors, reg, val1, val2, val3, val4;
-        if (gpmc_ecc_used != cs)
-                return -EINVAL;
-        nsectors = ((gpmc_read_reg(GPMC_ECC_CONFIG) >> 4) & 0x7) + 1;
-        for (i = 0; i < nsectors; i++) {
-                reg = GPMC_ECC_BCH_RESULT_0 + 16*i;
-                /* Read hw-computed remainder */
-                val1 = gpmc_read_reg(reg + 0);
-                val2 = gpmc_read_reg(reg + 4);
-                val3 = gpmc_read_reg(reg + 8);
-                val4 = gpmc_read_reg(reg + 12);
-                /*
-                 * Add constant polynomial to remainder, in order to get an ecc
-                 * sequence of 0xFFs for a buffer filled with 0xFFs.
-                 */
-                *ecc++ = 0xef ^ (val4 & 0xFF);
-                *ecc++ = 0x51 ^ ((val3 >> 24) & 0xFF);
-                *ecc++ = 0x2e ^ ((val3 >> 16) & 0xFF);
-                *ecc++ = 0x09 ^ ((val3 >> 8) & 0xFF);
-                *ecc++ = 0xed ^ (val3 & 0xFF);
-                *ecc++ = 0x93 ^ ((val2 >> 24) & 0xFF);
-                *ecc++ = 0x9a ^ ((val2 >> 16) & 0xFF);
-                *ecc++ = 0xc2 ^ ((val2 >> 8) & 0xFF);
-                *ecc++ = 0x97 ^ (val2 & 0xFF);
-                *ecc++ = 0x79 ^ ((val1 >> 24) & 0xFF);
-                *ecc++ = 0xe5 ^ ((val1 >> 16) & 0xFF);
-                *ecc++ = 0x24 ^ ((val1 >> 8) & 0xFF);
-                *ecc++ = 0xb5 ^ (val1 & 0xFF);
-        }
-        gpmc_ecc_used = -EINVAL;
-        return 0;
-}
-EXPORT_SYMBOL_GPL(gpmc_calculate_ecc_bch8);
-#endif /* CONFIG_ARCH_OMAP3 */
diff --git a/arch/arm/plat-omap/include/plat/gpmc.h b/arch/arm/mach-omap2/gpmc.h
index 2e6e2597178c..79f4dfc2adb3 100644
--- a/arch/arm/plat-omap/include/plat/gpmc.h
+++ b/arch/arm/mach-omap2/gpmc.h
@@ -11,6 +11,8 @@
 #ifndef __OMAP2_GPMC_H
 #define __OMAP2_GPMC_H
+#include <linux/platform_data/mtd-nand-omap2.h>
 /* Maximum Number of Chip Selects */
 #define GPMC_CS_NUM             8
@@ -32,15 +34,6 @@
 #define GPMC_SET_IRQ_STATUS     0x00000004
 #define GPMC_CONFIG_WP          0x00000005
-#define GPMC_GET_IRQ_STATUS     0x00000006
-#define GPMC_PREFETCH_FIFO_CNT  0x00000007 /* bytes available in FIFO for r/w */
-#define GPMC_PREFETCH_COUNT     0x00000008 /* remaining bytes to be read/write*/
-#define GPMC_STATUS_BUFFER      0x00000009 /* 1: buffer is available to write */
-#define GPMC_NAND_COMMAND       0x0000000a
-#define GPMC_NAND_ADDRESS       0x0000000b
-#define GPMC_NAND_DATA          0x0000000c
 #define GPMC_ENABLE_IRQ         0x0000000d
 /* ECC commands */
@@ -76,25 +69,10 @@
 #define GPMC_DEVICETYPE_NOR             0
 #define GPMC_DEVICETYPE_NAND            2
 #define GPMC_CONFIG_WRITEPROTECT        0x00000010
-#define GPMC_STATUS_BUFF_EMPTY          0x00000001
 #define WR_RD_PIN_MONITORING            0x00600000
-#define GPMC_PREFETCH_STATUS_FIFO_CNT(val)      ((val >> 24) & 0x7F)
-#define GPMC_PREFETCH_STATUS_COUNT(val) (val & 0x00003fff)
 #define GPMC_IRQ_FIFOEVENTENABLE        0x01
 #define GPMC_IRQ_COUNT_EVENT            0x02
-#define PREFETCH_FIFOTHRESHOLD_MAX      0x40
-#define PREFETCH_FIFOTHRESHOLD(val)     ((val) << 8)
-enum omap_ecc {
-                /* 1-bit ecc: stored at end of spare area */
-        OMAP_ECC_HAMMING_CODE_DEFAULT = 0, /* Default, s/w method */
-        OMAP_ECC_HAMMING_CODE_HW, /* gpmc to detect the error */
-                /* 1-bit ecc: stored at beginning of spare area as romcode */
-        OMAP_ECC_HAMMING_CODE_HW_ROMCODE, /* gpmc method & romcode layout */
-        OMAP_ECC_BCH4_CODE_HW, /* 4-bit BCH ecc code */
-        OMAP_ECC_BCH8_CODE_HW, /* 8-bit BCH ecc code */
-};
 /*
 * Note that all values in this struct are in nanoseconds except sync_clk
@@ -133,22 +111,6 @@ struct gpmc_timings {
        u16 wr_data_mux_bus;    /* WRDATAONADMUXBUS */
 };
-struct gpmc_nand_regs {
-        void __iomem    *gpmc_status;
-        void __iomem    *gpmc_nand_command;
-        void __iomem    *gpmc_nand_address;
-        void __iomem    *gpmc_nand_data;
-        void __iomem    *gpmc_prefetch_config1;
-        void __iomem    *gpmc_prefetch_config2;
-        void __iomem    *gpmc_prefetch_control;
-        void __iomem    *gpmc_prefetch_status;
-        void __iomem    *gpmc_ecc_config;
-        void __iomem    *gpmc_ecc_control;
-        void __iomem    *gpmc_ecc_size_config;
-        void __iomem    *gpmc_ecc1_result;
-        void __iomem    *gpmc_bch_result0;
-};
 extern void gpmc_update_nand_reg(struct gpmc_nand_regs *reg, int cs);
 extern int gpmc_get_client_irq(unsigned irq_config);
@@ -160,31 +122,14 @@ extern unsigned long gpmc_get_fclk_period(void);
 extern void gpmc_cs_write_reg(int cs, int idx, u32 val);
 extern u32 gpmc_cs_read_reg(int cs, int idx);
-extern int gpmc_cs_calc_divider(int cs, unsigned int sync_clk);
+extern int gpmc_calc_divider(unsigned int sync_clk);
 extern int gpmc_cs_set_timings(int cs, const struct gpmc_timings *t);
 extern int gpmc_cs_request(int cs, unsigned long size, unsigned long *base);
 extern void gpmc_cs_free(int cs);
 extern int gpmc_cs_set_reserved(int cs, int reserved);
 extern int gpmc_cs_reserved(int cs);
-extern int gpmc_prefetch_enable(int cs, int fifo_th, int dma_mode,
-                                        unsigned int u32_count, int is_write);
-extern int gpmc_prefetch_reset(int cs);
 extern void omap3_gpmc_save_context(void);
 extern void omap3_gpmc_restore_context(void);
-extern int gpmc_read_status(int cmd);
 extern int gpmc_cs_configure(int cs, int cmd, int wval);
-extern int gpmc_nand_read(int cs, int cmd);
-extern int gpmc_nand_write(int cs, int cmd, int wval);
-int gpmc_enable_hwecc(int cs, int mode, int dev_width, int ecc_size);
-int gpmc_calculate_ecc(int cs, const u_char *dat, u_char *ecc_code);
-#ifdef CONFIG_ARCH_OMAP3
-int gpmc_init_hwecc_bch(int cs, int nsectors, int nerrors);
-int gpmc_enable_hwecc_bch(int cs, int mode, int dev_width, int nsectors,
-                          int nerrors);
-int gpmc_calculate_ecc_bch4(int cs, const u_char *dat, u_char *ecc);
-int gpmc_calculate_ecc_bch8(int cs, const u_char *dat, u_char *ecc);
-#endif /* CONFIG_ARCH_OMAP3 */
 #endif
diff --git a/arch/arm/mach-omap2/hdq1w.c b/arch/arm/mach-omap2/hdq1w.c
index e003f2bba30c..3da8900598c8 100644
--- a/arch/arm/mach-omap2/hdq1w.c
+++ b/arch/arm/mach-omap2/hdq1w.c
@@ -27,8 +27,8 @@
 #include <linux/err.h>
 #include <linux/platform_device.h>
-#include <plat/omap_hwmod.h>
+#include "omap_hwmod.h"
-#include <plat/omap_device.h>
+#include "omap_device.h"
 #include "hdq1w.h"
 #include "common.h"
diff --git a/arch/arm/mach-omap2/hdq1w.h b/arch/arm/mach-omap2/hdq1w.h
index 0c1efc846d8d..c7e08d2a7a46 100644
--- a/arch/arm/mach-omap2/hdq1w.h
+++ b/arch/arm/mach-omap2/hdq1w.h
@@ -21,7 +21,7 @@
 #ifndef ARCH_ARM_MACH_OMAP2_HDQ1W_H
 #define ARCH_ARM_MACH_OMAP2_HDQ1W_H
-#include <plat/omap_hwmod.h>
+#include "omap_hwmod.h"
 /*
 * XXX A future cleanup patch should modify
diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c
index 4d3a6324155f..e3406dce59be 100644
--- a/arch/arm/mach-omap2/hsmmc.c
+++ b/arch/arm/mach-omap2/hsmmc.c
@@ -17,11 +17,12 @@
 #include <mach/hardware.h>
 #include <linux/platform_data/gpio-omap.h>
-#include <plat/mmc.h>
+#include "soc.h"
-#include <plat/omap-pm.h>
+#include "omap_device.h"
-#include <plat/omap_device.h>
+#include "omap-pm.h"
 #include "mux.h"
+#include "mmc.h"
 #include "hsmmc.h"
 #include "control.h"
diff --git a/arch/arm/mach-omap2/hwspinlock.c b/arch/arm/mach-omap2/hwspinlock.c
index 8763c8520dc2..1df9b5feda16 100644
--- a/arch/arm/mach-omap2/hwspinlock.c
+++ b/arch/arm/mach-omap2/hwspinlock.c
@@ -21,8 +21,8 @@
 #include <linux/err.h>
 #include <linux/hwspinlock.h>
-#include <plat/omap_hwmod.h>
+#include "omap_hwmod.h"
-#include <plat/omap_device.h>
+#include "omap_device.h"
 static struct hwspinlock_pdata omap_hwspinlock_pdata __initdata = {
        .base_id = 0,
diff --git a/arch/arm/mach-omap2/i2c.c b/arch/arm/mach-omap2/i2c.c
index fc57e67b321f..ad55b943108f 100644
--- a/arch/arm/mach-omap2/i2c.c
+++ b/arch/arm/mach-omap2/i2c.c
@@ -19,11 +19,13 @@
 *
 */
-#include <plat/i2c.h>
+#include "soc.h"
 #include "common.h"
-#include <plat/omap_hwmod.h>
+#include "omap_hwmod.h"
+#include "omap_device.h"
 #include "mux.h"
+#include "i2c.h"
 /* In register I2C_CON, Bit 15 is the I2C enable bit */
 #define I2C_EN                                  BIT(15)
@@ -33,7 +35,9 @@
 /* Maximum microseconds to wait for OMAP module to softreset */
 #define MAX_MODULE_SOFTRESET_WAIT       10000
-void __init omap2_i2c_mux_pins(int bus_id)
+#define MAX_OMAP_I2C_HWMOD_NAME_LEN     16
+static void __init omap2_i2c_mux_pins(int bus_id)
 {
        char mux_name[sizeof("i2c2_scl.i2c2_scl")];
@@ -104,3 +108,46 @@ int omap_i2c_reset(struct omap_hwmod *oh)
        return 0;
 }
+static const char name[] = "omap_i2c";
+int __init omap_i2c_add_bus(struct omap_i2c_bus_platform_data *i2c_pdata,
+                                int bus_id)
+{
+        int l;
+        struct omap_hwmod *oh;
+        struct platform_device *pdev;
+        char oh_name[MAX_OMAP_I2C_HWMOD_NAME_LEN];
+        struct omap_i2c_bus_platform_data *pdata;
+        struct omap_i2c_dev_attr *dev_attr;
+        omap2_i2c_mux_pins(bus_id);
+        l = snprintf(oh_name, MAX_OMAP_I2C_HWMOD_NAME_LEN, "i2c%d", bus_id);
+        WARN(l >= MAX_OMAP_I2C_HWMOD_NAME_LEN,
+                "String buffer overflow in I2C%d device setup\n", bus_id);
+        oh = omap_hwmod_lookup(oh_name);
+        if (!oh) {
+                        pr_err("Could not look up %s\n", oh_name);
+                        return -EEXIST;
+        }
+        pdata = i2c_pdata;
+        /*
+         * pass the hwmod class's CPU-specific knowledge of I2C IP revision in
+         * use, and functionality implementation flags, up to the OMAP I2C
+         * driver via platform data
+         */
+        pdata->rev = oh->class->rev;
+        dev_attr = (struct omap_i2c_dev_attr *)oh->dev_attr;
+        pdata->flags = dev_attr->flags;
+        pdev = omap_device_build(name, bus_id, oh, pdata,
+                        sizeof(struct omap_i2c_bus_platform_data),
+                        NULL, 0, 0);
+        WARN(IS_ERR(pdev), "Could not build omap_device for %s\n", name);
+        return PTR_RET(pdev);
+}
diff --git a/arch/arm/plat-omap/include/plat/i2c.h b/arch/arm/mach-omap2/i2c.h
index 7c22b9e10dc3..81dbb992a6bc 100644
--- a/arch/arm/plat-omap/include/plat/i2c.h
+++ b/arch/arm/mach-omap2/i2c.h
@@ -18,24 +18,11 @@
 * 02110-1301 USA
 *
 */
-#ifndef __ASM__ARCH_OMAP_I2C_H
-#define __ASM__ARCH_OMAP_I2C_H
-#include <linux/i2c.h>
+#include "../plat-omap/i2c.h"
-#include <linux/i2c-omap.h>
-#if defined(CONFIG_I2C_OMAP) || defined(CONFIG_I2C_OMAP_MODULE)
+#ifndef __MACH_OMAP2_I2C_H
-extern int omap_register_i2c_bus(int bus_id, u32 clkrate,
+#define __MACH_OMAP2_I2C_H
-                                 struct i2c_board_info const *info,
-                                 unsigned len);
-#else
-static inline int omap_register_i2c_bus(int bus_id, u32 clkrate,
-                                 struct i2c_board_info const *info,
-                                 unsigned len)
-{
-        return 0;
-}
-#endif
 /**
 * i2c_dev_attr - OMAP I2C controller device attributes for omap_hwmod
@@ -50,10 +37,6 @@ struct omap_i2c_dev_attr {
        u32     flags;
 };
-void __init omap1_i2c_mux_pins(int bus_id);
-void __init omap2_i2c_mux_pins(int bus_id);
-struct omap_hwmod;
 int omap_i2c_reset(struct omap_hwmod *oh);
-#endif /* __ASM__ARCH_OMAP_I2C_H */
+#endif  /* __MACH_OMAP2_I2C_H */
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 4234d28dc171..80d1cf17af8c 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -25,14 +25,12 @@
 #include <asm/tlb.h>
 #include <asm/mach/map.h>
-#include <plat/sram.h>
-#include <plat/sdrc.h>
 #include <plat/serial.h>
-#include <plat/omap-pm.h>
+#include <plat-omap/dma-omap.h>
-#include <plat/omap_hwmod.h>
-#include <plat/multi.h>
-#include <plat/dma.h>
+#include "../plat-omap/sram.h"
+#include "omap_hwmod.h"
 #include "soc.h"
 #include "iomap.h"
 #include "voltage.h"
@@ -43,6 +41,8 @@
 #include "clock2xxx.h"
 #include "clock3xxx.h"
 #include "clock44xx.h"
+#include "omap-pm.h"
+#include "sdrc.h"
 /*
 * The machine specific code may provide the extra mapping besides the
diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c
index 37f8f948047b..a106c75c5338 100644
--- a/arch/arm/mach-omap2/mcbsp.c
+++ b/arch/arm/mach-omap2/mcbsp.c
@@ -19,11 +19,12 @@
 #include <linux/platform_device.h>
 #include <linux/slab.h>
 #include <linux/platform_data/asoc-ti-mcbsp.h>
-#include <plat/dma.h>
-#include <plat/omap_device.h>
 #include <linux/pm_runtime.h>
+#include <plat-omap/dma-omap.h>
+#include "omap_device.h"
 /*
 * FIXME: Find a mechanism to enable/disable runtime the McBSP ICLK autoidle.
 * Sidetone needs non-gated ICLK and sidetone autoidle is broken.
diff --git a/arch/arm/mach-omap2/mmc.h b/arch/arm/mach-omap2/mmc.h
new file mode 100644
index 000000000000..0cd4b089da9c
--- /dev/null
+++ b/arch/arm/mach-omap2/mmc.h
@@ -0,0 +1,23 @@
+#include <linux/mmc/host.h>
+#include <linux/platform_data/mmc-omap.h>
+#define OMAP24XX_NR_MMC         2
+#define OMAP2420_MMC_SIZE       OMAP1_MMC_SIZE
+#define OMAP2_MMC1_BASE         0x4809c000
+#define OMAP4_MMC_REG_OFFSET    0x100
+#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
+void omap242x_init_mmc(struct omap_mmc_platform_data **mmc_data);
+#else
+static inline void omap242x_init_mmc(struct omap_mmc_platform_data **mmc_data)
+{
+}
+#endif
+struct omap_hwmod;
+int omap_msdi_reset(struct omap_hwmod *oh);
+/* called from board-specific card detection service routine */
+extern void omap_mmc_notify_cover_event(struct device *dev, int slot,
+                                        int is_closed);
diff --git a/arch/arm/mach-omap2/msdi.c b/arch/arm/mach-omap2/msdi.c
index 9e57b4aadb06..627e97e30743 100644
--- a/arch/arm/mach-omap2/msdi.c
+++ b/arch/arm/mach-omap2/msdi.c
@@ -25,13 +25,12 @@
 #include <linux/err.h>
 #include <linux/platform_data/gpio-omap.h>
-#include <plat/omap_hwmod.h>
-#include <plat/omap_device.h>
-#include <plat/mmc.h>
 #include "common.h"
 #include "control.h"
+#include "omap_hwmod.h"
+#include "omap_device.h"
 #include "mux.h"
+#include "mmc.h"
 /*
 * MSDI_CON_OFFSET: offset in bytes of the MSDI IP block's CON register
diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c
index 701e17cba468..26126343d6ac 100644
--- a/arch/arm/mach-omap2/mux.c
+++ b/arch/arm/mach-omap2/mux.c
@@ -36,8 +36,9 @@
 #include <linux/interrupt.h>
-#include <plat/omap_hwmod.h>
+#include "omap_hwmod.h"
+#include "soc.h"
 #include "control.h"
 #include "mux.h"
 #include "prm.h"
diff --git a/arch/arm/mach-omap2/omap-mpuss-lowpower.c b/arch/arm/mach-omap2/omap-mpuss-lowpower.c
index ff4e6a0e9c7c..3f5fd7e3549d 100644
--- a/arch/arm/mach-omap2/omap-mpuss-lowpower.c
+++ b/arch/arm/mach-omap2/omap-mpuss-lowpower.c
@@ -50,6 +50,7 @@
 #include <asm/suspend.h>
 #include <asm/hardware/cache-l2x0.h>
+#include "soc.h"
 #include "common.h"
 #include "omap44xx.h"
 #include "omap4-sar-layout.h"
diff --git a/arch/arm/plat-omap/include/plat/omap-pm.h b/arch/arm/mach-omap2/omap-pm.h
index 67faa7b8fe92..67faa7b8fe92 100644
--- a/arch/arm/plat-omap/include/plat/omap-pm.h
+++ b/arch/arm/mach-omap2/omap-pm.h
diff --git a/arch/arm/mach-omap2/omap-secure.c b/arch/arm/mach-omap2/omap-secure.c
index e089e4d1ae38..b970440cffca 100644
--- a/arch/arm/mach-omap2/omap-secure.c
+++ b/arch/arm/mach-omap2/omap-secure.c
@@ -18,7 +18,6 @@
 #include <asm/cacheflush.h>
 #include <asm/memblock.h>
-#include <plat/omap-secure.h>
 #include "omap-secure.h"
 static phys_addr_t omap_secure_memblock_base;
diff --git a/arch/arm/mach-omap2/omap-secure.h b/arch/arm/mach-omap2/omap-secure.h
index c90a43589abe..0e729170c46b 100644
--- a/arch/arm/mach-omap2/omap-secure.h
+++ b/arch/arm/mach-omap2/omap-secure.h
@@ -52,6 +52,13 @@ extern u32 omap_secure_dispatcher(u32 idx, u32 flag, u32 nargs,
                                u32 arg1, u32 arg2, u32 arg3, u32 arg4);
 extern u32 omap_smc2(u32 id, u32 falg, u32 pargs);
 extern phys_addr_t omap_secure_ram_mempool_base(void);
+extern int omap_secure_ram_reserve_memblock(void);
+#ifdef CONFIG_OMAP4_ERRATA_I688
+extern int omap_barrier_reserve_memblock(void);
+#else
+static inline void omap_barrier_reserve_memblock(void)
+{ }
+#endif
 #endif /* __ASSEMBLER__ */
 #endif /* OMAP_ARCH_OMAP_SECURE_H */
diff --git a/arch/arm/mach-omap2/omap4-common.c b/arch/arm/mach-omap2/omap4-common.c
index e1f289748c5d..d25845c471da 100644
--- a/arch/arm/mach-omap2/omap4-common.c
+++ b/arch/arm/mach-omap2/omap4-common.c
@@ -25,16 +25,15 @@
 #include <asm/mach/map.h>
 #include <asm/memblock.h>
-#include <plat/sram.h>
+#include "../plat-omap/sram.h"
-#include <plat/omap-secure.h>
-#include <plat/mmc.h>
 #include "omap-wakeupgen.h"
 #include "soc.h"
 #include "common.h"
+#include "mmc.h"
 #include "hsmmc.h"
 #include "omap4-sar-layout.h"
+#include "omap-secure.h"
 #ifdef CONFIG_CACHE_L2X0
 static void __iomem *l2cache_base;
diff --git a/arch/arm/plat-omap/omap_device.c b/arch/arm/mach-omap2/omap_device.c
index 7a7d1f2a65e9..0ef934fec364 100644
--- a/arch/arm/plat-omap/omap_device.c
+++ b/arch/arm/mach-omap2/omap_device.c
@@ -89,9 +89,8 @@
 #include <linux/of.h>
 #include <linux/notifier.h>
-#include <plat/omap_device.h>
+#include "omap_device.h"
-#include <plat/omap_hwmod.h>
+#include "omap_hwmod.h"
-#include <plat/clock.h>
 /* These parameters are passed to _omap_device_{de,}activate() */
 #define USE_WAKEUP_LAT                  0
diff --git a/arch/arm/plat-omap/include/plat/omap_device.h b/arch/arm/mach-omap2/omap_device.h
index 106f50665804..0933c599bf89 100644
--- a/arch/arm/plat-omap/include/plat/omap_device.h
+++ b/arch/arm/mach-omap2/omap_device.h
@@ -34,7 +34,7 @@
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
-#include <plat/omap_hwmod.h>
+#include "omap_hwmod.h"
 extern struct dev_pm_domain omap_device_pm_domain;
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index b969ab1d258b..87eee3b62a3c 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -139,8 +139,8 @@
 #include <linux/slab.h>
 #include <linux/bootmem.h>
-#include <plat/clock.h>
+#include "clock.h"
-#include <plat/omap_hwmod.h>
+#include "omap_hwmod.h"
 #include <plat/prcm.h>
 #include "soc.h"
diff --git a/arch/arm/plat-omap/include/plat/omap_hwmod.h b/arch/arm/mach-omap2/omap_hwmod.h
index b3349f7b1a2c..87b59b45c678 100644
--- a/arch/arm/plat-omap/include/plat/omap_hwmod.h
+++ b/arch/arm/mach-omap2/omap_hwmod.h
@@ -35,7 +35,6 @@
 #include <linux/list.h>
 #include <linux/ioport.h>
 #include <linux/spinlock.h>
-#include <plat/cpu.h>
 struct omap_device;
diff --git a/arch/arm/mach-omap2/omap_hwmod_2420_data.c b/arch/arm/mach-omap2/omap_hwmod_2420_data.c
index b5db6007c523..3efed3d633d1 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2420_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2420_data.c
@@ -12,21 +12,23 @@
 * XXX handle crossbar/shared link difference for L3?
 * XXX these should be marked initdata for multi-OMAP kernels
 */
+#include <linux/i2c-omap.h>
 #include <linux/platform_data/spi-omap2-mcspi.h>
-#include <plat/omap_hwmod.h>
+#include <plat-omap/dma-omap.h>
-#include <plat/dma.h>
-#include <plat/serial.h>
-#include <plat/i2c.h>
 #include <plat/dmtimer.h>
+#include "omap_hwmod.h"
 #include "l3_2xxx.h"
 #include "l4_2xxx.h"
-#include <plat/mmc.h>
 #include "omap_hwmod_common_data.h"
 #include "cm-regbits-24xx.h"
 #include "prm-regbits-24xx.h"
+#include "i2c.h"
+#include "mmc.h"
 #include "wd_timer.h"
 /*
diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
index c455e41b0237..dc768c50e523 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
@@ -12,21 +12,23 @@
 * XXX handle crossbar/shared link difference for L3?
 * XXX these should be marked initdata for multi-OMAP kernels
 */
+#include <linux/i2c-omap.h>
 #include <linux/platform_data/asoc-ti-mcbsp.h>
 #include <linux/platform_data/spi-omap2-mcspi.h>
-#include <plat/omap_hwmod.h>
+#include <plat-omap/dma-omap.h>
-#include <plat/dma.h>
-#include <plat/serial.h>
-#include <plat/i2c.h>
 #include <plat/dmtimer.h>
-#include <plat/mmc.h>
+#include "omap_hwmod.h"
+#include "mmc.h"
 #include "l3_2xxx.h"
 #include "soc.h"
 #include "omap_hwmod_common_data.h"
 #include "prm-regbits-24xx.h"
 #include "cm-regbits-24xx.h"
+#include "i2c.h"
 #include "wd_timer.h"
 /*
diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_interconnect_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_interconnect_data.c
index cbb4ef6544ad..74ae76767510 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_interconnect_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_interconnect_data.c
@@ -13,9 +13,10 @@
 */
 #include <asm/sizes.h>
-#include <plat/omap_hwmod.h>
 #include <plat/serial.h>
+#include "omap_hwmod.h"
 #include "omap_hwmod_common_data.h"
 struct omap_hwmod_addr_space omap2430_mmc1_addr_space[] = {
diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c
index 8851bbb6bb24..57fc2f95584d 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c
@@ -9,13 +9,17 @@
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 */
-#include <plat/omap_hwmod.h>
 #include <plat/serial.h>
-#include <plat/dma.h>
+#include <plat-omap/dma-omap.h>
-#include <plat/common.h>
+#include "../plat-omap/common.h"
+#include "omap_hwmod.h"
 #include "hdq1w.h"
 #include "omap_hwmod_common_data.h"
+#include "dma.h"
 /* UART */
diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_interconnect_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_interconnect_data.c
index 1a1287d62648..dd3809c8f409 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2xxx_interconnect_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_interconnect_data.c
@@ -13,8 +13,9 @@
 */
 #include <asm/sizes.h>
-#include <plat/omap_hwmod.h>
 #include <plat/serial.h>
+#include "omap_hwmod.h"
 #include "l3_2xxx.h"
 #include "l4_2xxx.h"
diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c
index bd9220ed5ab9..27bdff46fda0 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c
@@ -8,13 +8,14 @@
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 */
-#include <plat/omap_hwmod.h>
 #include <plat/serial.h>
 #include <linux/platform_data/gpio-omap.h>
-#include <plat/dma.h>
+#include <plat-omap/dma-omap.h>
 #include <plat/dmtimer.h>
 #include <linux/platform_data/spi-omap2-mcspi.h>
+#include "omap_hwmod.h"
 #include "omap_hwmod_common_data.h"
 #include "cm-regbits-24xx.h"
 #include "prm-regbits-24xx.h"
diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c
index 59d5c1cd316d..ad8d43b33273 100644
--- a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c
@@ -14,13 +14,11 @@
 * GNU General Public License for more details.
 */
-#include <plat/omap_hwmod.h>
+#include <linux/i2c-omap.h>
-#include <plat/cpu.h>
+#include "omap_hwmod.h"
 #include <linux/platform_data/gpio-omap.h>
 #include <linux/platform_data/spi-omap2-mcspi.h>
-#include <plat/dma.h>
-#include <plat/mmc.h>
-#include <plat/i2c.h>
 #include "omap_hwmod_common_data.h"
@@ -28,6 +26,8 @@
 #include "cm33xx.h"
 #include "prm33xx.h"
 #include "prm-regbits-33xx.h"
+#include "i2c.h"
+#include "mmc.h"
 /*
 * IP blocks
diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
index f67b7ee07dd4..d5d52a776278 100644
--- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
@@ -14,16 +14,16 @@
 *
 * XXX these should be marked initdata for multi-OMAP kernels
 */
+#include <linux/i2c-omap.h>
 #include <linux/power/smartreflex.h>
 #include <linux/platform_data/gpio-omap.h>
-#include <plat/omap_hwmod.h>
+#include <plat-omap/dma-omap.h>
-#include <plat/dma.h>
 #include <plat/serial.h>
 #include "l3_3xxx.h"
 #include "l4_3xxx.h"
-#include <plat/i2c.h>
-#include <plat/mmc.h>
 #include <linux/platform_data/asoc-ti-mcbsp.h>
 #include <linux/platform_data/spi-omap2-mcspi.h>
 #include <plat/dmtimer.h>
@@ -32,9 +32,14 @@
 #include "am35xx.h"
 #include "soc.h"
+#include "omap_hwmod.h"
 #include "omap_hwmod_common_data.h"
 #include "prm-regbits-34xx.h"
 #include "cm-regbits-34xx.h"
+#include "dma.h"
+#include "i2c.h"
+#include "mmc.h"
 #include "wd_timer.h"
 /*
diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
index 652d0285bd6d..5b9be734709c 100644
--- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
@@ -21,22 +21,25 @@
 #include <linux/io.h>
 #include <linux/platform_data/gpio-omap.h>
 #include <linux/power/smartreflex.h>
+#include <linux/i2c-omap.h>
+#include <plat-omap/dma-omap.h>
-#include <plat/omap_hwmod.h>
-#include <plat/i2c.h>
-#include <plat/dma.h>
 #include <linux/platform_data/spi-omap2-mcspi.h>
 #include <linux/platform_data/asoc-ti-mcbsp.h>
-#include <plat/mmc.h>
 #include <plat/dmtimer.h>
-#include <plat/common.h>
 #include <plat/iommu.h>
+#include "../plat-omap/common.h"
+#include "omap_hwmod.h"
 #include "omap_hwmod_common_data.h"
 #include "cm1_44xx.h"
 #include "cm2_44xx.h"
 #include "prm44xx.h"
 #include "prm-regbits-44xx.h"
+#include "i2c.h"
+#include "mmc.h"
 #include "wd_timer.h"
 /* Base offset for all OMAP4 interrupts external to MPUSS */
diff --git a/arch/arm/mach-omap2/omap_hwmod_common_data.c b/arch/arm/mach-omap2/omap_hwmod_common_data.c
index 9f1ccdc8cc8c..79d623b83e49 100644
--- a/arch/arm/mach-omap2/omap_hwmod_common_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_common_data.c
@@ -16,7 +16,7 @@
 * data and their integration with other OMAP modules and Linux.
 */
-#include <plat/omap_hwmod.h>
+#include "omap_hwmod.h"
 #include "omap_hwmod_common_data.h"
diff --git a/arch/arm/mach-omap2/omap_hwmod_common_data.h b/arch/arm/mach-omap2/omap_hwmod_common_data.h
index 2bc8f1705d4a..cfcce299177c 100644
--- a/arch/arm/mach-omap2/omap_hwmod_common_data.h
+++ b/arch/arm/mach-omap2/omap_hwmod_common_data.h
@@ -13,7 +13,7 @@
 #ifndef __ARCH_ARM_MACH_OMAP2_OMAP_HWMOD_COMMON_DATA_H
 #define __ARCH_ARM_MACH_OMAP2_OMAP_HWMOD_COMMON_DATA_H
-#include <plat/omap_hwmod.h>
+#include "omap_hwmod.h"
 #include "common.h"
 #include "display.h"
diff --git a/arch/arm/mach-omap2/omap_opp_data.h b/arch/arm/mach-omap2/omap_opp_data.h
index c784c12f98a1..7e437bf6024c 100644
--- a/arch/arm/mach-omap2/omap_opp_data.h
+++ b/arch/arm/mach-omap2/omap_opp_data.h
@@ -19,7 +19,7 @@
 #ifndef __ARCH_ARM_MACH_OMAP2_OMAP_OPP_DATA_H
 #define __ARCH_ARM_MACH_OMAP2_OMAP_OPP_DATA_H
-#include <plat/omap_hwmod.h>
+#include "omap_hwmod.h"
 #include "voltage.h"
diff --git a/arch/arm/mach-omap2/omap_twl.c b/arch/arm/mach-omap2/omap_twl.c
index f515a1a056d5..2bf35dc091be 100644
--- a/arch/arm/mach-omap2/omap_twl.c
+++ b/arch/arm/mach-omap2/omap_twl.c
@@ -18,6 +18,7 @@
 #include <linux/kernel.h>
 #include <linux/i2c/twl.h>
+#include "soc.h"
 #include "voltage.h"
 #include "pm.h"
diff --git a/arch/arm/mach-omap2/opp.c b/arch/arm/mach-omap2/opp.c
index 58e16aef40bb..bd41d59a7cab 100644
--- a/arch/arm/mach-omap2/opp.c
+++ b/arch/arm/mach-omap2/opp.c
@@ -20,7 +20,7 @@
 #include <linux/opp.h>
 #include <linux/cpu.h>
-#include <plat/omap_device.h>
+#include "omap_device.h"
 #include "omap_opp_data.h"
diff --git a/arch/arm/mach-omap2/opp3xxx_data.c b/arch/arm/mach-omap2/opp3xxx_data.c
index 75cef5f67a8a..62772e0e0d69 100644
--- a/arch/arm/mach-omap2/opp3xxx_data.c
+++ b/arch/arm/mach-omap2/opp3xxx_data.c
@@ -19,6 +19,7 @@
 */
 #include <linux/module.h>
+#include "soc.h"
 #include "control.h"
 #include "omap_opp_data.h"
 #include "pm.h"
diff --git a/arch/arm/mach-omap2/pm-debug.c b/arch/arm/mach-omap2/pm-debug.c
index 46092cd806fa..3cf4fdfd7ab0 100644
--- a/arch/arm/mach-omap2/pm-debug.c
+++ b/arch/arm/mach-omap2/pm-debug.c
@@ -27,12 +27,13 @@
 #include <linux/module.h>
 #include <linux/slab.h>
-#include <plat/clock.h>
+#include "clock.h"
 #include "powerdomain.h"
 #include "clockdomain.h"
 #include <plat/dmtimer.h>
-#include <plat/omap-pm.h>
+#include "omap-pm.h"
+#include "soc.h"
 #include "cm2xxx_3xxx.h"
 #include "prm2xxx_3xxx.h"
 #include "pm.h"
diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c
index ea61c32957bd..331478f9b864 100644
--- a/arch/arm/mach-omap2/pm.c
+++ b/arch/arm/mach-omap2/pm.c
@@ -20,10 +20,11 @@
 #include <asm/system_misc.h>
-#include <plat/omap-pm.h>
+#include "omap-pm.h"
-#include <plat/omap_device.h>
+#include "omap_device.h"
 #include "common.h"
+#include "soc.h"
 #include "prcm-common.h"
 #include "voltage.h"
 #include "powerdomain.h"
diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c
index 8af6cd6ac331..6d17e044ffb8 100644
--- a/arch/arm/mach-omap2/pm24xx.c
+++ b/arch/arm/mach-omap2/pm24xx.c
@@ -36,11 +36,13 @@
 #include <asm/mach-types.h>
 #include <asm/system_misc.h>
-#include <plat/clock.h>
+#include <plat-omap/dma-omap.h>
-#include <plat/sram.h>
-#include <plat/dma.h>
+#include "../plat-omap/sram.h"
+#include "soc.h"
 #include "common.h"
+#include "clock.h"
 #include "prm2xxx_3xxx.h"
 #include "prm-regbits-24xx.h"
 #include "cm2xxx_3xxx.h"
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index ba670db1fd37..160fa250c41e 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -35,17 +35,18 @@
 #include <asm/suspend.h>
 #include <asm/system_misc.h>
-#include <plat/sram.h>
 #include "clockdomain.h"
 #include "powerdomain.h"
-#include <plat/sdrc.h>
 #include <plat/prcm.h>
-#include <plat/gpmc.h>
+#include <plat-omap/dma-omap.h>
-#include <plat/dma.h>
+#include "../plat-omap/sram.h"
+#include "soc.h"
 #include "common.h"
 #include "cm2xxx_3xxx.h"
 #include "cm-regbits-34xx.h"
+#include "gpmc.h"
 #include "prm-regbits-34xx.h"
 #include "prm2xxx_3xxx.h"
diff --git a/arch/arm/mach-omap2/pm44xx.c b/arch/arm/mach-omap2/pm44xx.c
index 04922d149068..7da75aed1514 100644
--- a/arch/arm/mach-omap2/pm44xx.c
+++ b/arch/arm/mach-omap2/pm44xx.c
@@ -18,6 +18,7 @@
 #include <linux/slab.h>
 #include <asm/system_misc.h>
+#include "soc.h"
 #include "common.h"
 #include "clockdomain.h"
 #include "powerdomain.h"
diff --git a/arch/arm/mach-omap2/pmu.c b/arch/arm/mach-omap2/pmu.c
index 2a791766283d..3cf79b54ce61 100644
--- a/arch/arm/mach-omap2/pmu.c
+++ b/arch/arm/mach-omap2/pmu.c
@@ -15,8 +15,9 @@
 #include <asm/pmu.h>
-#include <plat/omap_hwmod.h>
+#include "soc.h"
-#include <plat/omap_device.h>
+#include "omap_hwmod.h"
+#include "omap_device.h"
 static char *omap2_pmu_oh_names[] = {"mpu"};
 static char *omap3_pmu_oh_names[] = {"mpu", "debugss"};
diff --git a/arch/arm/mach-omap2/powerdomain.h b/arch/arm/mach-omap2/powerdomain.h
index baee90608d11..5277d56eb37f 100644
--- a/arch/arm/mach-omap2/powerdomain.h
+++ b/arch/arm/mach-omap2/powerdomain.h
@@ -22,8 +22,6 @@
 #include <linux/atomic.h>
-#include <plat/cpu.h>
 #include "voltage.h"
 /* Powerdomain basic power states */
diff --git a/arch/arm/mach-omap2/powerdomains2xxx_data.c b/arch/arm/mach-omap2/powerdomains2xxx_data.c
index 2385c1f009ee..ba520d4f7c7b 100644
--- a/arch/arm/mach-omap2/powerdomains2xxx_data.c
+++ b/arch/arm/mach-omap2/powerdomains2xxx_data.c
@@ -14,6 +14,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
+#include "soc.h"
 #include "powerdomain.h"
 #include "powerdomains2xxx_3xxx_data.h"
diff --git a/arch/arm/mach-omap2/prcm.c b/arch/arm/mach-omap2/prcm.c
index 0f51e034e0aa..cff270a178c5 100644
--- a/arch/arm/mach-omap2/prcm.c
+++ b/arch/arm/mach-omap2/prcm.c
@@ -28,6 +28,7 @@
 #include "common.h"
 #include <plat/prcm.h>
+#include "soc.h"
 #include "clock.h"
 #include "clock2xxx.h"
 #include "cm2xxx_3xxx.h"
diff --git a/arch/arm/mach-omap2/prm33xx.c b/arch/arm/mach-omap2/prm33xx.c
index e7dbb6cf1255..624ade5c3c33 100644
--- a/arch/arm/mach-omap2/prm33xx.c
+++ b/arch/arm/mach-omap2/prm33xx.c
@@ -19,7 +19,7 @@
 #include <linux/err.h>
 #include <linux/io.h>
-#include <plat/common.h>
+#include "../plat-omap/common.h"
 #include "common.h"
 #include "prm33xx.h"
diff --git a/arch/arm/mach-omap2/prm_common.c b/arch/arm/mach-omap2/prm_common.c
index 6b4d332be2f6..6fabbd816d6b 100644
--- a/arch/arm/mach-omap2/prm_common.c
+++ b/arch/arm/mach-omap2/prm_common.c
@@ -24,7 +24,7 @@
 #include <linux/interrupt.h>
 #include <linux/slab.h>
-#include <plat/common.h>
+#include "../plat-omap/common.h"
 #include <plat/prcm.h>
 #include "prm2xxx_3xxx.h"
diff --git a/arch/arm/mach-omap2/sdram-hynix-h8mbx00u0mer-0em.h b/arch/arm/mach-omap2/sdram-hynix-h8mbx00u0mer-0em.h
index 8bfaf342a028..1ee58c281a31 100644
--- a/arch/arm/mach-omap2/sdram-hynix-h8mbx00u0mer-0em.h
+++ b/arch/arm/mach-omap2/sdram-hynix-h8mbx00u0mer-0em.h
@@ -11,7 +11,7 @@
 #ifndef __ARCH_ARM_MACH_OMAP2_SDRAM_HYNIX_H8MBX00U0MER0EM
 #define __ARCH_ARM_MACH_OMAP2_SDRAM_HYNIX_H8MBX00U0MER0EM
-#include <plat/sdrc.h>
+#include "sdrc.h"
 /* Hynix H8MBX00U0MER-0EM */
 static struct omap_sdrc_params h8mbx00u0mer0em_sdrc_params[] = {
diff --git a/arch/arm/mach-omap2/sdram-micron-mt46h32m32lf-6.h b/arch/arm/mach-omap2/sdram-micron-mt46h32m32lf-6.h
index a391b4939f74..85cccc004c06 100644
--- a/arch/arm/mach-omap2/sdram-micron-mt46h32m32lf-6.h
+++ b/arch/arm/mach-omap2/sdram-micron-mt46h32m32lf-6.h
@@ -14,7 +14,7 @@
 #ifndef ARCH_ARM_MACH_OMAP2_SDRAM_MICRON_MT46H32M32LF
 #define ARCH_ARM_MACH_OMAP2_SDRAM_MICRON_MT46H32M32LF
-#include <plat/sdrc.h>
+#include "sdrc.h"
 /* Micron MT46H32M32LF-6 */
 /* XXX Using ARE = 0x1 (no autorefresh burst) -- can this be changed? */
diff --git a/arch/arm/mach-omap2/sdram-nokia.c b/arch/arm/mach-omap2/sdram-nokia.c
index 845c4fd2b125..0fa7ffa9b5ed 100644
--- a/arch/arm/mach-omap2/sdram-nokia.c
+++ b/arch/arm/mach-omap2/sdram-nokia.c
@@ -18,10 +18,8 @@
 #include <linux/io.h>
 #include "common.h"
-#include <plat/clock.h>
-#include <plat/sdrc.h>
 #include "sdram-nokia.h"
+#include "sdrc.h"
 /* In picoseconds, except for tREF (ns), tXP, tCKE, tWTR (clks) */
 struct sdram_timings {
diff --git a/arch/arm/mach-omap2/sdram-numonyx-m65kxxxxam.h b/arch/arm/mach-omap2/sdram-numonyx-m65kxxxxam.h
index cd4352917022..003f7bf4e2e3 100644
--- a/arch/arm/mach-omap2/sdram-numonyx-m65kxxxxam.h
+++ b/arch/arm/mach-omap2/sdram-numonyx-m65kxxxxam.h
@@ -11,7 +11,7 @@
 #ifndef __ARCH_ARM_MACH_OMAP2_SDRAM_NUMONYX_M65KXXXXAM
 #define __ARCH_ARM_MACH_OMAP2_SDRAM_NUMONYX_M65KXXXXAM
-#include <plat/sdrc.h>
+#include "sdrc.h"
 /* Numonyx  M65KXXXXAM */
 static struct omap_sdrc_params m65kxxxxam_sdrc_params[] = {
diff --git a/arch/arm/mach-omap2/sdram-qimonda-hyb18m512160af-6.h b/arch/arm/mach-omap2/sdram-qimonda-hyb18m512160af-6.h
index 0e518a72831f..8dc3de5ebb5b 100644
--- a/arch/arm/mach-omap2/sdram-qimonda-hyb18m512160af-6.h
+++ b/arch/arm/mach-omap2/sdram-qimonda-hyb18m512160af-6.h
@@ -14,7 +14,7 @@
 #ifndef ARCH_ARM_MACH_OMAP2_SDRAM_QIMONDA_HYB18M512160AF6
 #define ARCH_ARM_MACH_OMAP2_SDRAM_QIMONDA_HYB18M512160AF6
-#include <plat/sdrc.h>
+#include "sdrc.h"
 /* Qimonda HYB18M512160AF-6 */
 static struct omap_sdrc_params hyb18m512160af6_sdrc_params[] = {
diff --git a/arch/arm/mach-omap2/sdrc.c b/arch/arm/mach-omap2/sdrc.c
index e3d345f46409..94d4082f87ed 100644
--- a/arch/arm/mach-omap2/sdrc.c
+++ b/arch/arm/mach-omap2/sdrc.c
@@ -23,11 +23,10 @@
 #include <linux/clk.h>
 #include <linux/io.h>
-#include "common.h"
+#include "../plat-omap/sram.h"
-#include <plat/clock.h>
-#include <plat/sram.h>
-#include <plat/sdrc.h>
+#include "common.h"
+#include "clock.h"
 #include "sdrc.h"
 static struct omap_sdrc_params *sdrc_init_params_cs0, *sdrc_init_params_cs1;
@@ -160,19 +159,3 @@ void __init omap2_sdrc_init(struct omap_sdrc_params *sdrc_cs0,
        sdrc_write_reg(l, SDRC_POWER);
        omap2_sms_save_context();
 }
-void omap2_sms_write_rot_control(u32 val, unsigned ctx)
-{
-        sms_write_reg(val, SMS_ROT_CONTROL(ctx));
-}
-void omap2_sms_write_rot_size(u32 val, unsigned ctx)
-{
-        sms_write_reg(val, SMS_ROT_SIZE(ctx));
-}
-void omap2_sms_write_rot_physical_ba(u32 val, unsigned ctx)
-{
-        sms_write_reg(val, SMS_ROT_PHYSICAL_BA(ctx));
-}
diff --git a/arch/arm/mach-omap2/sdrc.h b/arch/arm/mach-omap2/sdrc.h
index b3f83799e6cf..69c4b329452e 100644
--- a/arch/arm/mach-omap2/sdrc.h
+++ b/arch/arm/mach-omap2/sdrc.h
@@ -2,12 +2,14 @@
 #define __ARCH_ARM_MACH_OMAP2_SDRC_H
 /*
- * OMAP2 SDRC register definitions
+ * OMAP2/3 SDRC/SMS macros and prototypes
 *
- * Copyright (C) 2007 Texas Instruments, Inc.
+ * Copyright (C) 2007-2008, 2012 Texas Instruments, Inc.
- * Copyright (C) 2007 Nokia Corporation
+ * Copyright (C) 2007-2008 Nokia Corporation
 *
- * Written by Paul Walmsley
+ * Paul Walmsley
+ * Tony Lindgren
+ * Richard Woodruff
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
@@ -15,8 +17,6 @@
 */
 #undef DEBUG
-#include <plat/sdrc.h>
 #ifndef __ASSEMBLER__
 #include <linux/io.h>
@@ -50,6 +50,58 @@ static inline u32 sms_read_reg(u16 reg)
 {
        return __raw_readl(OMAP_SMS_REGADDR(reg));
 }
+/**
+ * struct omap_sdrc_params - SDRC parameters for a given SDRC clock rate
+ * @rate: SDRC clock rate (in Hz)
+ * @actim_ctrla: Value to program to SDRC_ACTIM_CTRLA for this rate
+ * @actim_ctrlb: Value to program to SDRC_ACTIM_CTRLB for this rate
+ * @rfr_ctrl: Value to program to SDRC_RFR_CTRL for this rate
+ * @mr: Value to program to SDRC_MR for this rate
+ *
+ * This structure holds a pre-computed set of register values for the
+ * SDRC for a given SDRC clock rate and SDRAM chip.  These are
+ * intended to be pre-computed and specified in an array in the board-*.c
+ * files.  The structure is keyed off the 'rate' field.
+ */
+struct omap_sdrc_params {
+        unsigned long rate;
+        u32 actim_ctrla;
+        u32 actim_ctrlb;
+        u32 rfr_ctrl;
+        u32 mr;
+};
+#ifdef CONFIG_SOC_HAS_OMAP2_SDRC
+void omap2_sdrc_init(struct omap_sdrc_params *sdrc_cs0,
+                            struct omap_sdrc_params *sdrc_cs1);
+#else
+static inline void __init omap2_sdrc_init(struct omap_sdrc_params *sdrc_cs0,
+                                          struct omap_sdrc_params *sdrc_cs1) {};
+#endif
+int omap2_sdrc_get_params(unsigned long r,
+                          struct omap_sdrc_params **sdrc_cs0,
+                          struct omap_sdrc_params **sdrc_cs1);
+void omap2_sms_save_context(void);
+void omap2_sms_restore_context(void);
+struct memory_timings {
+        u32 m_type;             /* ddr = 1, sdr = 0 */
+        u32 dll_mode;           /* use lock mode = 1, unlock mode = 0 */
+        u32 slow_dll_ctrl;      /* unlock mode, dll value for slow speed */
+        u32 fast_dll_ctrl;      /* unlock mode, dll value for fast speed */
+        u32 base_cs;            /* base chip select to use for calculations */
+};
+extern void omap2xxx_sdrc_init_params(u32 force_lock_to_unlock_mode);
+struct omap_sdrc_params *rx51_get_sdram_timings(void);
+u32 omap2xxx_sdrc_dll_is_unlocked(void);
+u32 omap2xxx_sdrc_reprogram(u32 level, u32 force);
 #else
 #define OMAP242X_SDRC_REGADDR(reg)                                      \
                        OMAP2_L3_IO_ADDRESS(OMAP2420_SDRC_BASE + (reg))
@@ -57,6 +109,7 @@ static inline u32 sms_read_reg(u16 reg)
                        OMAP2_L3_IO_ADDRESS(OMAP243X_SDRC_BASE + (reg))
 #define OMAP34XX_SDRC_REGADDR(reg)                                      \
                        OMAP2_L3_IO_ADDRESS(OMAP343X_SDRC_BASE + (reg))
 #endif  /* __ASSEMBLER__ */
 /* Minimum frequency that the SDRC DLL can lock at */
@@ -74,4 +127,85 @@ static inline u32 sms_read_reg(u16 reg)
 */
 #define SDRC_MPURATE_LOOPS              96
+/* SDRC register offsets - read/write with sdrc_{read,write}_reg() */
+#define SDRC_SYSCONFIG          0x010
+#define SDRC_CS_CFG             0x040
+#define SDRC_SHARING            0x044
+#define SDRC_ERR_TYPE           0x04C
+#define SDRC_DLLA_CTRL          0x060
+#define SDRC_DLLA_STATUS        0x064
+#define SDRC_DLLB_CTRL          0x068
+#define SDRC_DLLB_STATUS        0x06C
+#define SDRC_POWER              0x070
+#define SDRC_MCFG_0             0x080
+#define SDRC_MR_0               0x084
+#define SDRC_EMR2_0             0x08c
+#define SDRC_ACTIM_CTRL_A_0     0x09c
+#define SDRC_ACTIM_CTRL_B_0     0x0a0
+#define SDRC_RFR_CTRL_0         0x0a4
+#define SDRC_MANUAL_0           0x0a8
+#define SDRC_MCFG_1             0x0B0
+#define SDRC_MR_1               0x0B4
+#define SDRC_EMR2_1             0x0BC
+#define SDRC_ACTIM_CTRL_A_1     0x0C4
+#define SDRC_ACTIM_CTRL_B_1     0x0C8
+#define SDRC_RFR_CTRL_1         0x0D4
+#define SDRC_MANUAL_1           0x0D8
+#define SDRC_POWER_AUTOCOUNT_SHIFT      8
+#define SDRC_POWER_AUTOCOUNT_MASK       (0xffff << SDRC_POWER_AUTOCOUNT_SHIFT)
+#define SDRC_POWER_CLKCTRL_SHIFT        4
+#define SDRC_POWER_CLKCTRL_MASK         (0x3 << SDRC_POWER_CLKCTRL_SHIFT)
+#define SDRC_SELF_REFRESH_ON_AUTOCOUNT  (0x2 << SDRC_POWER_CLKCTRL_SHIFT)
+/*
+ * These values represent the number of memory clock cycles between
+ * autorefresh initiation.  They assume 1 refresh per 64 ms (JEDEC), 8192
+ * rows per device, and include a subtraction of a 50 cycle window in the
+ * event that the autorefresh command is delayed due to other SDRC activity.
+ * The '| 1' sets the ARE field to send one autorefresh when the autorefresh
+ * counter reaches 0.
+ *
+ * These represent optimal values for common parts, it won't work for all.
+ * As long as you scale down, most parameters are still work, they just
+ * become sub-optimal. The RFR value goes in the opposite direction. If you
+ * don't adjust it down as your clock period increases the refresh interval
+ * will not be met. Setting all parameters for complete worst case may work,
+ * but may cut memory performance by 2x. Due to errata the DLLs need to be
+ * unlocked and their value needs run time calibration. A dynamic call is
+ * need for that as no single right value exists acorss production samples.
+ *
+ * Only the FULL speed values are given. Current code is such that rate
+ * changes must be made at DPLLoutx2. The actual value adjustment for low
+ * frequency operation will be handled by omap_set_performance()
+ *
+ * By having the boot loader boot up in the fastest L4 speed available likely
+ * will result in something which you can switch between.
+ */
+#define SDRC_RFR_CTRL_165MHz    (0x00044c00 | 1)
+#define SDRC_RFR_CTRL_133MHz    (0x0003de00 | 1)
+#define SDRC_RFR_CTRL_100MHz    (0x0002da01 | 1)
+#define SDRC_RFR_CTRL_110MHz    (0x0002da01 | 1) /* Need to calc */
+#define SDRC_RFR_CTRL_BYPASS    (0x00005000 | 1) /* Need to calc */
+/*
+ * SMS register access
+ */
+#define OMAP242X_SMS_REGADDR(reg)                                       \
+                (void __iomem *)OMAP2_L3_IO_ADDRESS(OMAP2420_SMS_BASE + reg)
+#define OMAP243X_SMS_REGADDR(reg)                                       \
+                (void __iomem *)OMAP2_L3_IO_ADDRESS(OMAP243X_SMS_BASE + reg)
+#define OMAP343X_SMS_REGADDR(reg)                                       \
+                (void __iomem *)OMAP2_L3_IO_ADDRESS(OMAP343X_SMS_BASE + reg)
+/* SMS register offsets - read/write with sms_{read,write}_reg() */
+#define SMS_SYSCONFIG                   0x010
+/* REVISIT: fill in other SMS registers here */
 #endif
diff --git a/arch/arm/mach-omap2/sdrc2xxx.c b/arch/arm/mach-omap2/sdrc2xxx.c
index 73e55e485329..3b8bfdf848d5 100644
--- a/arch/arm/mach-omap2/sdrc2xxx.c
+++ b/arch/arm/mach-omap2/sdrc2xxx.c
@@ -24,9 +24,7 @@
 #include <linux/clk.h>
 #include <linux/io.h>
-#include <plat/clock.h>
+#include "../plat-omap/sram.h"
-#include <plat/sram.h>
-#include <plat/sdrc.h>
 #include "soc.h"
 #include "iomap.h"
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index 0405c8190803..12363f313f08 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -28,13 +28,14 @@
 #include <linux/console.h>
 #include <plat/omap-serial.h>
-#include "common.h"
+#include <plat-omap/dma-omap.h>
-#include <plat/dma.h>
-#include <plat/omap_hwmod.h>
-#include <plat/omap_device.h>
-#include <plat/omap-pm.h>
 #include <plat/serial.h>
+#include "common.h"
+#include "omap_hwmod.h"
+#include "omap_device.h"
+#include "omap-pm.h"
+#include "soc.h"
 #include "prm2xxx_3xxx.h"
 #include "pm.h"
 #include "cm2xxx_3xxx.h"
diff --git a/arch/arm/mach-omap2/sleep34xx.S b/arch/arm/mach-omap2/sleep34xx.S
index 506987979c1c..75afe11207ff 100644
--- a/arch/arm/mach-omap2/sleep34xx.S
+++ b/arch/arm/mach-omap2/sleep34xx.S
@@ -26,7 +26,7 @@
 #include <asm/assembler.h>
-#include <plat/sram.h>
+#include "../plat-omap/sram.h"
 #include "omap34xx.h"
 #include "iomap.h"
diff --git a/arch/arm/mach-omap2/soc.h b/arch/arm/mach-omap2/soc.h
index fc9b96daf851..070096496e20 100644
--- a/arch/arm/mach-omap2/soc.h
+++ b/arch/arm/mach-omap2/soc.h
@@ -1,7 +1,473 @@
-#include <plat/cpu.h>
+/*
+ * OMAP cpu type detection
+ *
+ * Copyright (C) 2004, 2008 Nokia Corporation
+ *
+ * Copyright (C) 2009-11 Texas Instruments.
+ *
+ * Written by Tony Lindgren <tony.lindgren@nokia.com>
+ *
+ * Added OMAP4/5 specific defines - Santosh Shilimkar<santosh.shilimkar@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
 #include "omap24xx.h"
 #include "omap34xx.h"
 #include "omap44xx.h"
 #include "ti81xx.h"
 #include "am33xx.h"
 #include "omap54xx.h"
+#ifndef __ASSEMBLY__
+#include <linux/bitops.h>
+/*
+ * Test if multicore OMAP support is needed
+ */
+#undef MULTI_OMAP2
+#undef OMAP_NAME
+#ifdef CONFIG_SOC_OMAP2420
+# ifdef OMAP_NAME
+#  undef  MULTI_OMAP2
+#  define MULTI_OMAP2
+# else
+#  define OMAP_NAME omap2420
+# endif
+#endif
+#ifdef CONFIG_SOC_OMAP2430
+# ifdef OMAP_NAME
+#  undef  MULTI_OMAP2
+#  define MULTI_OMAP2
+# else
+#  define OMAP_NAME omap2430
+# endif
+#endif
+#ifdef CONFIG_ARCH_OMAP3
+# ifdef OMAP_NAME
+#  undef  MULTI_OMAP2
+#  define MULTI_OMAP2
+# else
+#  define OMAP_NAME omap3
+# endif
+#endif
+#ifdef CONFIG_ARCH_OMAP4
+# ifdef OMAP_NAME
+#  undef  MULTI_OMAP2
+#  define MULTI_OMAP2
+# else
+#  define OMAP_NAME omap4
+# endif
+#endif
+#ifdef CONFIG_SOC_OMAP5
+# ifdef OMAP_NAME
+#  undef  MULTI_OMAP2
+#  define MULTI_OMAP2
+# else
+#  define OMAP_NAME omap5
+# endif
+#endif
+#ifdef CONFIG_SOC_AM33XX
+# ifdef OMAP_NAME
+#  undef  MULTI_OMAP2
+#  define MULTI_OMAP2
+# else
+#  define OMAP_NAME am33xx
+# endif
+#endif
+/*
+ * Omap device type i.e. EMU/HS/TST/GP/BAD
+ */
+#define OMAP2_DEVICE_TYPE_TEST          0
+#define OMAP2_DEVICE_TYPE_EMU           1
+#define OMAP2_DEVICE_TYPE_SEC           2
+#define OMAP2_DEVICE_TYPE_GP            3
+#define OMAP2_DEVICE_TYPE_BAD           4
+int omap_type(void);
+/*
+ * omap_rev bits:
+ * CPU id bits  (0730, 1510, 1710, 2422...)     [31:16]
+ * CPU revision (See _REV_ defined in cpu.h)    [15:08]
+ * CPU class bits (15xx, 16xx, 24xx, 34xx...)   [07:00]
+ */
+unsigned int omap_rev(void);
+/*
+ * Get the CPU revision for OMAP devices
+ */
+#define GET_OMAP_REVISION()     ((omap_rev() >> 8) & 0xff)
+/*
+ * Macros to group OMAP into cpu classes.
+ * These can be used in most places.
+ * cpu_is_omap24xx():   True for OMAP2420, OMAP2422, OMAP2423, OMAP2430
+ * cpu_is_omap242x():   True for OMAP2420, OMAP2422, OMAP2423
+ * cpu_is_omap243x():   True for OMAP2430
+ * cpu_is_omap343x():   True for OMAP3430
+ * cpu_is_omap443x():   True for OMAP4430
+ * cpu_is_omap446x():   True for OMAP4460
+ * cpu_is_omap447x():   True for OMAP4470
+ * soc_is_omap543x():   True for OMAP5430, OMAP5432
+ */
+#define GET_OMAP_CLASS  (omap_rev() & 0xff)
+#define IS_OMAP_CLASS(class, id)                        \
+static inline int is_omap ##class (void)                \
+{                                                       \
+        return (GET_OMAP_CLASS == (id)) ? 1 : 0;        \
+}
+#define GET_AM_CLASS    ((omap_rev() >> 24) & 0xff)
+#define IS_AM_CLASS(class, id)                          \
+static inline int is_am ##class (void)                  \
+{                                                       \
+        return (GET_AM_CLASS == (id)) ? 1 : 0;          \
+}
+#define GET_TI_CLASS    ((omap_rev() >> 24) & 0xff)
+#define IS_TI_CLASS(class, id)                  \
+static inline int is_ti ##class (void)          \
+{                                                       \
+        return (GET_TI_CLASS == (id)) ? 1 : 0;  \
+}
+#define GET_OMAP_SUBCLASS       ((omap_rev() >> 20) & 0x0fff)
+#define IS_OMAP_SUBCLASS(subclass, id)                  \
+static inline int is_omap ##subclass (void)             \
+{                                                       \
+        return (GET_OMAP_SUBCLASS == (id)) ? 1 : 0;     \
+}
+#define IS_TI_SUBCLASS(subclass, id)                    \
+static inline int is_ti ##subclass (void)               \
+{                                                       \
+        return (GET_OMAP_SUBCLASS == (id)) ? 1 : 0;     \
+}
+#define IS_AM_SUBCLASS(subclass, id)                    \
+static inline int is_am ##subclass (void)               \
+{                                                       \
+        return (GET_OMAP_SUBCLASS == (id)) ? 1 : 0;     \
+}
+IS_OMAP_CLASS(24xx, 0x24)
+IS_OMAP_CLASS(34xx, 0x34)
+IS_OMAP_CLASS(44xx, 0x44)
+IS_AM_CLASS(35xx, 0x35)
+IS_OMAP_CLASS(54xx, 0x54)
+IS_AM_CLASS(33xx, 0x33)
+IS_TI_CLASS(81xx, 0x81)
+IS_OMAP_SUBCLASS(242x, 0x242)
+IS_OMAP_SUBCLASS(243x, 0x243)
+IS_OMAP_SUBCLASS(343x, 0x343)
+IS_OMAP_SUBCLASS(363x, 0x363)
+IS_OMAP_SUBCLASS(443x, 0x443)
+IS_OMAP_SUBCLASS(446x, 0x446)
+IS_OMAP_SUBCLASS(447x, 0x447)
+IS_OMAP_SUBCLASS(543x, 0x543)
+IS_TI_SUBCLASS(816x, 0x816)
+IS_TI_SUBCLASS(814x, 0x814)
+IS_AM_SUBCLASS(335x, 0x335)
+#define cpu_is_omap24xx()               0
+#define cpu_is_omap242x()               0
+#define cpu_is_omap243x()               0
+#define cpu_is_omap34xx()               0
+#define cpu_is_omap343x()               0
+#define cpu_is_ti81xx()                 0
+#define cpu_is_ti816x()                 0
+#define cpu_is_ti814x()                 0
+#define soc_is_am35xx()                 0
+#define soc_is_am33xx()                 0
+#define soc_is_am335x()                 0
+#define cpu_is_omap44xx()               0
+#define cpu_is_omap443x()               0
+#define cpu_is_omap446x()               0
+#define cpu_is_omap447x()               0
+#define soc_is_omap54xx()               0
+#define soc_is_omap543x()               0
+#if defined(MULTI_OMAP2)
+# if defined(CONFIG_ARCH_OMAP2)
+#  undef  cpu_is_omap24xx
+#  define cpu_is_omap24xx()             is_omap24xx()
+# endif
+# if defined (CONFIG_SOC_OMAP2420)
+#  undef  cpu_is_omap242x
+#  define cpu_is_omap242x()             is_omap242x()
+# endif
+# if defined (CONFIG_SOC_OMAP2430)
+#  undef  cpu_is_omap243x
+#  define cpu_is_omap243x()             is_omap243x()
+# endif
+# if defined(CONFIG_ARCH_OMAP3)
+#  undef  cpu_is_omap34xx
+#  undef  cpu_is_omap343x
+#  define cpu_is_omap34xx()             is_omap34xx()
+#  define cpu_is_omap343x()             is_omap343x()
+# endif
+#else
+# if defined(CONFIG_ARCH_OMAP2)
+#  undef  cpu_is_omap24xx
+#  define cpu_is_omap24xx()             1
+# endif
+# if defined(CONFIG_SOC_OMAP2420)
+#  undef  cpu_is_omap242x
+#  define cpu_is_omap242x()             1
+# endif
+# if defined(CONFIG_SOC_OMAP2430)
+#  undef  cpu_is_omap243x
+#  define cpu_is_omap243x()             1
+# endif
+# if defined(CONFIG_ARCH_OMAP3)
+#  undef  cpu_is_omap34xx
+#  define cpu_is_omap34xx()             1
+# endif
+# if defined(CONFIG_SOC_OMAP3430)
+#  undef  cpu_is_omap343x
+#  define cpu_is_omap343x()             1
+# endif
+#endif
+/*
+ * Macros to detect individual cpu types.
+ * These are only rarely needed.
+ * cpu_is_omap2420():   True for OMAP2420
+ * cpu_is_omap2422():   True for OMAP2422
+ * cpu_is_omap2423():   True for OMAP2423
+ * cpu_is_omap2430():   True for OMAP2430
+ * cpu_is_omap3430():   True for OMAP3430
+ */
+#define GET_OMAP_TYPE   ((omap_rev() >> 16) & 0xffff)
+#define IS_OMAP_TYPE(type, id)                          \
+static inline int is_omap ##type (void)                 \
+{                                                       \
+        return (GET_OMAP_TYPE == (id)) ? 1 : 0;         \
+}
+IS_OMAP_TYPE(2420, 0x2420)
+IS_OMAP_TYPE(2422, 0x2422)
+IS_OMAP_TYPE(2423, 0x2423)
+IS_OMAP_TYPE(2430, 0x2430)
+IS_OMAP_TYPE(3430, 0x3430)
+#define cpu_is_omap2420()               0
+#define cpu_is_omap2422()               0
+#define cpu_is_omap2423()               0
+#define cpu_is_omap2430()               0
+#define cpu_is_omap3430()               0
+#define cpu_is_omap3630()               0
+#define soc_is_omap5430()               0
+/* These are needed for the common code */
+#ifdef CONFIG_ARCH_OMAP2PLUS
+#define cpu_is_omap7xx()                0
+#define cpu_is_omap15xx()               0
+#define cpu_is_omap16xx()               0
+#define cpu_is_omap1510()               0
+#define cpu_is_omap1610()               0
+#define cpu_is_omap1611()               0
+#define cpu_is_omap1621()               0
+#define cpu_is_omap1710()               0
+#define cpu_class_is_omap1()            0
+#define cpu_class_is_omap2()            1
+#endif
+#if defined(CONFIG_ARCH_OMAP2)
+# undef  cpu_is_omap2420
+# undef  cpu_is_omap2422
+# undef  cpu_is_omap2423
+# undef  cpu_is_omap2430
+# define cpu_is_omap2420()              is_omap2420()
+# define cpu_is_omap2422()              is_omap2422()
+# define cpu_is_omap2423()              is_omap2423()
+# define cpu_is_omap2430()              is_omap2430()
+#endif
+#if defined(CONFIG_ARCH_OMAP3)
+# undef cpu_is_omap3430
+# undef cpu_is_ti81xx
+# undef cpu_is_ti816x
+# undef cpu_is_ti814x
+# undef soc_is_am35xx
+# define cpu_is_omap3430()              is_omap3430()
+# undef cpu_is_omap3630
+# define cpu_is_omap3630()              is_omap363x()
+# define cpu_is_ti81xx()                is_ti81xx()
+# define cpu_is_ti816x()                is_ti816x()
+# define cpu_is_ti814x()                is_ti814x()
+# define soc_is_am35xx()                is_am35xx()
+#endif
+# if defined(CONFIG_SOC_AM33XX)
+# undef soc_is_am33xx
+# undef soc_is_am335x
+# define soc_is_am33xx()                is_am33xx()
+# define soc_is_am335x()                is_am335x()
+#endif
+# if defined(CONFIG_ARCH_OMAP4)
+# undef cpu_is_omap44xx
+# undef cpu_is_omap443x
+# undef cpu_is_omap446x
+# undef cpu_is_omap447x
+# define cpu_is_omap44xx()              is_omap44xx()
+# define cpu_is_omap443x()              is_omap443x()
+# define cpu_is_omap446x()              is_omap446x()
+# define cpu_is_omap447x()              is_omap447x()
+# endif
+# if defined(CONFIG_SOC_OMAP5)
+# undef soc_is_omap54xx
+# undef soc_is_omap543x
+# define soc_is_omap54xx()              is_omap54xx()
+# define soc_is_omap543x()              is_omap543x()
+#endif
+/* Various silicon revisions for omap2 */
+#define OMAP242X_CLASS          0x24200024
+#define OMAP2420_REV_ES1_0      OMAP242X_CLASS
+#define OMAP2420_REV_ES2_0      (OMAP242X_CLASS | (0x1 << 8))
+#define OMAP243X_CLASS          0x24300024
+#define OMAP2430_REV_ES1_0      OMAP243X_CLASS
+#define OMAP343X_CLASS          0x34300034
+#define OMAP3430_REV_ES1_0      OMAP343X_CLASS
+#define OMAP3430_REV_ES2_0      (OMAP343X_CLASS | (0x1 << 8))
+#define OMAP3430_REV_ES2_1      (OMAP343X_CLASS | (0x2 << 8))
+#define OMAP3430_REV_ES3_0      (OMAP343X_CLASS | (0x3 << 8))
+#define OMAP3430_REV_ES3_1      (OMAP343X_CLASS | (0x4 << 8))
+#define OMAP3430_REV_ES3_1_2    (OMAP343X_CLASS | (0x5 << 8))
+#define OMAP363X_CLASS          0x36300034
+#define OMAP3630_REV_ES1_0      OMAP363X_CLASS
+#define OMAP3630_REV_ES1_1      (OMAP363X_CLASS | (0x1 << 8))
+#define OMAP3630_REV_ES1_2      (OMAP363X_CLASS | (0x2 << 8))
+#define TI816X_CLASS            0x81600034
+#define TI8168_REV_ES1_0        TI816X_CLASS
+#define TI8168_REV_ES1_1        (TI816X_CLASS | (0x1 << 8))
+#define TI814X_CLASS            0x81400034
+#define TI8148_REV_ES1_0        TI814X_CLASS
+#define TI8148_REV_ES2_0        (TI814X_CLASS | (0x1 << 8))
+#define TI8148_REV_ES2_1        (TI814X_CLASS | (0x2 << 8))
+#define AM35XX_CLASS            0x35170034
+#define AM35XX_REV_ES1_0        AM35XX_CLASS
+#define AM35XX_REV_ES1_1        (AM35XX_CLASS | (0x1 << 8))
+#define AM335X_CLASS            0x33500033
+#define AM335X_REV_ES1_0        AM335X_CLASS
+#define OMAP443X_CLASS          0x44300044
+#define OMAP4430_REV_ES1_0      (OMAP443X_CLASS | (0x10 << 8))
+#define OMAP4430_REV_ES2_0      (OMAP443X_CLASS | (0x20 << 8))
+#define OMAP4430_REV_ES2_1      (OMAP443X_CLASS | (0x21 << 8))
+#define OMAP4430_REV_ES2_2      (OMAP443X_CLASS | (0x22 << 8))
+#define OMAP4430_REV_ES2_3      (OMAP443X_CLASS | (0x23 << 8))
+#define OMAP446X_CLASS          0x44600044
+#define OMAP4460_REV_ES1_0      (OMAP446X_CLASS | (0x10 << 8))
+#define OMAP4460_REV_ES1_1      (OMAP446X_CLASS | (0x11 << 8))
+#define OMAP447X_CLASS          0x44700044
+#define OMAP4470_REV_ES1_0      (OMAP447X_CLASS | (0x10 << 8))
+#define OMAP54XX_CLASS          0x54000054
+#define OMAP5430_REV_ES1_0      (OMAP54XX_CLASS | (0x30 << 16) | (0x10 << 8))
+#define OMAP5432_REV_ES1_0      (OMAP54XX_CLASS | (0x32 << 16) | (0x10 << 8))
+void omap2xxx_check_revision(void);
+void omap3xxx_check_revision(void);
+void omap4xxx_check_revision(void);
+void omap5xxx_check_revision(void);
+void omap3xxx_check_features(void);
+void ti81xx_check_features(void);
+void omap4xxx_check_features(void);
+/*
+ * Runtime detection of OMAP3 features
+ *
+ * OMAP3_HAS_IO_CHAIN_CTRL: Some later members of the OMAP3 chip
+ *    family have OS-level control over the I/O chain clock.  This is
+ *    to avoid a window during which wakeups could potentially be lost
+ *    during powerdomain transitions.  If this bit is set, it
+ *    indicates that the chip does support OS-level control of this
+ *    feature.
+ */
+extern u32 omap_features;
+#define OMAP3_HAS_L2CACHE               BIT(0)
+#define OMAP3_HAS_IVA                   BIT(1)
+#define OMAP3_HAS_SGX                   BIT(2)
+#define OMAP3_HAS_NEON                  BIT(3)
+#define OMAP3_HAS_ISP                   BIT(4)
+#define OMAP3_HAS_192MHZ_CLK            BIT(5)
+#define OMAP3_HAS_IO_WAKEUP             BIT(6)
+#define OMAP3_HAS_SDRC                  BIT(7)
+#define OMAP3_HAS_IO_CHAIN_CTRL         BIT(8)
+#define OMAP4_HAS_MPU_1GHZ              BIT(9)
+#define OMAP4_HAS_MPU_1_2GHZ            BIT(10)
+#define OMAP4_HAS_MPU_1_5GHZ            BIT(11)
+#define OMAP3_HAS_FEATURE(feat,flag)                    \
+static inline unsigned int omap3_has_ ##feat(void)      \
+{                                                       \
+        return omap_features & OMAP3_HAS_ ##flag;       \
+}                                                       \
+OMAP3_HAS_FEATURE(l2cache, L2CACHE)
+OMAP3_HAS_FEATURE(sgx, SGX)
+OMAP3_HAS_FEATURE(iva, IVA)
+OMAP3_HAS_FEATURE(neon, NEON)
+OMAP3_HAS_FEATURE(isp, ISP)
+OMAP3_HAS_FEATURE(192mhz_clk, 192MHZ_CLK)
+OMAP3_HAS_FEATURE(io_wakeup, IO_WAKEUP)
+OMAP3_HAS_FEATURE(sdrc, SDRC)
+OMAP3_HAS_FEATURE(io_chain_ctrl, IO_CHAIN_CTRL)
+/*
+ * Runtime detection of OMAP4 features
+ */
+#define OMAP4_HAS_FEATURE(feat, flag)                   \
+static inline unsigned int omap4_has_ ##feat(void)      \
+{                                                       \
+        return omap_features & OMAP4_HAS_ ##flag;       \
+}                                                       \
+OMAP4_HAS_FEATURE(mpu_1ghz, MPU_1GHZ)
+OMAP4_HAS_FEATURE(mpu_1_2ghz, MPU_1_2GHZ)
+OMAP4_HAS_FEATURE(mpu_1_5ghz, MPU_1_5GHZ)
+#endif  /* __ASSEMBLY__ */
diff --git a/arch/arm/mach-omap2/sr_device.c b/arch/arm/mach-omap2/sr_device.c
index f8217a5a4a26..b0e77a407047 100644
--- a/arch/arm/mach-omap2/sr_device.c
+++ b/arch/arm/mach-omap2/sr_device.c
@@ -23,8 +23,8 @@
 #include <linux/slab.h>
 #include <linux/io.h>
-#include <plat/omap_device.h>
+#include "soc.h"
+#include "omap_device.h"
 #include "voltage.h"
 #include "control.h"
 #include "pm.h"
diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c
index 69e46631a7cd..565e5755c9bc 100644
--- a/arch/arm/mach-omap2/timer.c
+++ b/arch/arm/mach-omap2/timer.c
@@ -43,10 +43,10 @@
 #include <asm/sched_clock.h>
 #include <asm/arch_timer.h>
-#include <plat/omap_hwmod.h>
+#include "omap_hwmod.h"
-#include <plat/omap_device.h>
+#include "omap_device.h"
 #include <plat/dmtimer.h>
-#include <plat/omap-pm.h>
+#include "omap-pm.h"
 #include "soc.h"
 #include "common.h"
diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c
index 635e109f5ad3..1a0739d397f3 100644
--- a/arch/arm/mach-omap2/twl-common.c
+++ b/arch/arm/mach-omap2/twl-common.c
@@ -26,7 +26,6 @@
 #include <linux/regulator/machine.h>
 #include <linux/regulator/fixed.h>
-#include <plat/i2c.h>
 #include <plat/usb.h>
 #include "soc.h"
diff --git a/arch/arm/mach-omap2/usb-host.c b/arch/arm/mach-omap2/usb-host.c
index 3c434498e12e..4fe67129643d 100644
--- a/arch/arm/mach-omap2/usb-host.c
+++ b/arch/arm/mach-omap2/usb-host.c
@@ -26,7 +26,8 @@
 #include <asm/io.h>
 #include <plat/usb.h>
-#include <plat/omap_device.h>
+#include "soc.h"
+#include "omap_device.h"
 #include "mux.h"
diff --git a/arch/arm/mach-omap2/usb-musb.c b/arch/arm/mach-omap2/usb-musb.c
index 51da21cb78f1..07f385a2900c 100644
--- a/arch/arm/mach-omap2/usb-musb.c
+++ b/arch/arm/mach-omap2/usb-musb.c
@@ -26,10 +26,9 @@
 #include <linux/usb/musb.h>
 #include <plat/usb.h>
-#include <plat/omap_device.h>
+#include "omap_device.h"
-#include "am35xx.h"
+#include "soc.h"
 #include "mux.h"
 static struct musb_hdrc_config musb_config = {
diff --git a/arch/arm/mach-omap2/usb-tusb6010.c b/arch/arm/mach-omap2/usb-tusb6010.c
index 805bea6edf17..6064425ed47b 100644
--- a/arch/arm/mach-omap2/usb-tusb6010.c
+++ b/arch/arm/mach-omap2/usb-tusb6010.c
@@ -18,7 +18,7 @@
 #include <linux/usb/musb.h>
-#include <plat/gpmc.h>
+#include "gpmc.h"
 #include "mux.h"
diff --git a/arch/arm/mach-omap2/wd_timer.c b/arch/arm/mach-omap2/wd_timer.c
index b2f1c67043a2..f6b6c37ac3f4 100644
--- a/arch/arm/mach-omap2/wd_timer.c
+++ b/arch/arm/mach-omap2/wd_timer.c
@@ -11,7 +11,7 @@
 #include <linux/io.h>
 #include <linux/err.h>
-#include <plat/omap_hwmod.h>
+#include "omap_hwmod.h"
 #include "wd_timer.h"
 #include "common.h"
diff --git a/arch/arm/mach-omap2/wd_timer.h b/arch/arm/mach-omap2/wd_timer.h
index f6bbba73b535..a78f81034a9f 100644
--- a/arch/arm/mach-omap2/wd_timer.h
+++ b/arch/arm/mach-omap2/wd_timer.h
@@ -10,7 +10,7 @@
 #ifndef __ARCH_ARM_MACH_OMAP2_WD_TIMER_H
 #define __ARCH_ARM_MACH_OMAP2_WD_TIMER_H
-#include <plat/omap_hwmod.h>
+#include "omap_hwmod.h"
 extern int omap2_wd_timer_disable(struct omap_hwmod *oh);
 extern int omap2_wd_timer_reset(struct omap_hwmod *oh);
diff --git a/arch/arm/plat-omap/Makefile b/arch/arm/plat-omap/Makefile
index dacaee009a4e..4bd0ace20e98 100644
--- a/arch/arm/plat-omap/Makefile
+++ b/arch/arm/plat-omap/Makefile
@@ -3,13 +3,12 @@
 #
 # Common support
-obj-y := common.o sram.o clock.o dma.o fb.o counter_32k.o
+obj-y := common.o sram.o dma.o fb.o counter_32k.o
 obj-m :=
 obj-n :=
 obj-  :=
 # omap_device support (OMAP2+ only at the moment)
-obj-$(CONFIG_ARCH_OMAP2PLUS) += omap_device.o
 obj-$(CONFIG_OMAP_DM_TIMER) += dmtimer.o
 obj-$(CONFIG_OMAP_DEBUG_DEVICES) += debug-devices.o
diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c
deleted file mode 100644
index 9d7ac20ef8f9..000000000000
--- a/arch/arm/plat-omap/clock.c
+++ /dev/null
@@ -1,544 +0,0 @@
-/*
- *  linux/arch/arm/plat-omap/clock.c
- *
- *  Copyright (C) 2004 - 2008 Nokia corporation
- *  Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
- *
- *  Modified for omap shared clock framework by Tony Lindgren <tony@atomide.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/export.h>
-#include <linux/err.h>
-#include <linux/string.h>
-#include <linux/clk.h>
-#include <linux/mutex.h>
-#include <linux/cpufreq.h>
-#include <linux/io.h>
-#include <plat/clock.h>
-static LIST_HEAD(clocks);
-static DEFINE_MUTEX(clocks_mutex);
-static DEFINE_SPINLOCK(clockfw_lock);
-static struct clk_functions *arch_clock;
-/*
- * Standard clock functions defined in include/linux/clk.h
- */
-int clk_enable(struct clk *clk)
-{
-        unsigned long flags;
-        int ret;
-        if (clk == NULL || IS_ERR(clk))
-                return -EINVAL;
-        if (!arch_clock || !arch_clock->clk_enable)
-                return -EINVAL;
-        spin_lock_irqsave(&clockfw_lock, flags);
-        ret = arch_clock->clk_enable(clk);
-        spin_unlock_irqrestore(&clockfw_lock, flags);
-        return ret;
-}
-EXPORT_SYMBOL(clk_enable);
-void clk_disable(struct clk *clk)
-{
-        unsigned long flags;
-        if (clk == NULL || IS_ERR(clk))
-                return;
-        if (!arch_clock || !arch_clock->clk_disable)
-                return;
-        spin_lock_irqsave(&clockfw_lock, flags);
-        if (clk->usecount == 0) {
-                pr_err("Trying disable clock %s with 0 usecount\n",
-                       clk->name);
-                WARN_ON(1);
-                goto out;
-        }
-        arch_clock->clk_disable(clk);
-out:
-        spin_unlock_irqrestore(&clockfw_lock, flags);
-}
-EXPORT_SYMBOL(clk_disable);
-unsigned long clk_get_rate(struct clk *clk)
-{
-        unsigned long flags;
-        unsigned long ret;
-        if (clk == NULL || IS_ERR(clk))
-                return 0;
-        spin_lock_irqsave(&clockfw_lock, flags);
-        ret = clk->rate;
-        spin_unlock_irqrestore(&clockfw_lock, flags);
-        return ret;
-}
-EXPORT_SYMBOL(clk_get_rate);
-/*
- * Optional clock functions defined in include/linux/clk.h
- */
-long clk_round_rate(struct clk *clk, unsigned long rate)
-{
-        unsigned long flags;
-        long ret;
-        if (clk == NULL || IS_ERR(clk))
-                return 0;
-        if (!arch_clock || !arch_clock->clk_round_rate)
-                return 0;
-        spin_lock_irqsave(&clockfw_lock, flags);
-        ret = arch_clock->clk_round_rate(clk, rate);
-        spin_unlock_irqrestore(&clockfw_lock, flags);
-        return ret;
-}
-EXPORT_SYMBOL(clk_round_rate);
-int clk_set_rate(struct clk *clk, unsigned long rate)
-{
-        unsigned long flags;
-        int ret = -EINVAL;
-        if (clk == NULL || IS_ERR(clk))
-                return ret;
-        if (!arch_clock || !arch_clock->clk_set_rate)
-                return ret;
-        spin_lock_irqsave(&clockfw_lock, flags);
-        ret = arch_clock->clk_set_rate(clk, rate);
-        if (ret == 0)
-                propagate_rate(clk);
-        spin_unlock_irqrestore(&clockfw_lock, flags);
-        return ret;
-}
-EXPORT_SYMBOL(clk_set_rate);
-int clk_set_parent(struct clk *clk, struct clk *parent)
-{
-        unsigned long flags;
-        int ret = -EINVAL;
-        if (clk == NULL || IS_ERR(clk) || parent == NULL || IS_ERR(parent))
-                return ret;
-        if (!arch_clock || !arch_clock->clk_set_parent)
-                return ret;
-        spin_lock_irqsave(&clockfw_lock, flags);
-        if (clk->usecount == 0) {
-                ret = arch_clock->clk_set_parent(clk, parent);
-                if (ret == 0)
-                        propagate_rate(clk);
-        } else
-                ret = -EBUSY;
-        spin_unlock_irqrestore(&clockfw_lock, flags);
-        return ret;
-}
-EXPORT_SYMBOL(clk_set_parent);
-struct clk *clk_get_parent(struct clk *clk)
-{
-        return clk->parent;
-}
-EXPORT_SYMBOL(clk_get_parent);
-/*
- * OMAP specific clock functions shared between omap1 and omap2
- */
-int __initdata mpurate;
-/*
- * By default we use the rate set by the bootloader.
- * You can override this with mpurate= cmdline option.
- */
-static int __init omap_clk_setup(char *str)
-{
-        get_option(&str, &mpurate);
-        if (!mpurate)
-                return 1;
-        if (mpurate < 1000)
-                mpurate *= 1000000;
-        return 1;
-}
-__setup("mpurate=", omap_clk_setup);
-/* Used for clocks that always have same value as the parent clock */
-unsigned long followparent_recalc(struct clk *clk)
-{
-        return clk->parent->rate;
-}
-/*
- * Used for clocks that have the same value as the parent clock,
- * divided by some factor
- */
-unsigned long omap_fixed_divisor_recalc(struct clk *clk)
-{
-        WARN_ON(!clk->fixed_div);
-        return clk->parent->rate / clk->fixed_div;
-}
-void clk_reparent(struct clk *child, struct clk *parent)
-{
-        list_del_init(&child->sibling);
-        if (parent)
-                list_add(&child->sibling, &parent->children);
-        child->parent = parent;
-        /* now do the debugfs renaming to reattach the child
-           to the proper parent */
-}
-/* Propagate rate to children */
-void propagate_rate(struct clk *tclk)
-{
-        struct clk *clkp;
-        list_for_each_entry(clkp, &tclk->children, sibling) {
-                if (clkp->recalc)
-                        clkp->rate = clkp->recalc(clkp);
-                propagate_rate(clkp);
-        }
-}
-static LIST_HEAD(root_clks);
-/**
- * recalculate_root_clocks - recalculate and propagate all root clocks
- *
- * Recalculates all root clocks (clocks with no parent), which if the
- * clock's .recalc is set correctly, should also propagate their rates.
- * Called at init.
- */
-void recalculate_root_clocks(void)
-{
-        struct clk *clkp;
-        list_for_each_entry(clkp, &root_clks, sibling) {
-                if (clkp->recalc)
-                        clkp->rate = clkp->recalc(clkp);
-                propagate_rate(clkp);
-        }
-}
-/**
- * clk_preinit - initialize any fields in the struct clk before clk init
- * @clk: struct clk * to initialize
- *
- * Initialize any struct clk fields needed before normal clk initialization
- * can run.  No return value.
- */
-void clk_preinit(struct clk *clk)
-{
-        INIT_LIST_HEAD(&clk->children);
-}
-int clk_register(struct clk *clk)
-{
-        if (clk == NULL || IS_ERR(clk))
-                return -EINVAL;
-        /*
-         * trap out already registered clocks
-         */
-        if (clk->node.next || clk->node.prev)
-                return 0;
-        mutex_lock(&clocks_mutex);
-        if (clk->parent)
-                list_add(&clk->sibling, &clk->parent->children);
-        else
-                list_add(&clk->sibling, &root_clks);
-        list_add(&clk->node, &clocks);
-        if (clk->init)
-                clk->init(clk);
-        mutex_unlock(&clocks_mutex);
-        return 0;
-}
-EXPORT_SYMBOL(clk_register);
-void clk_unregister(struct clk *clk)
-{
-        if (clk == NULL || IS_ERR(clk))
-                return;
-        mutex_lock(&clocks_mutex);
-        list_del(&clk->sibling);
-        list_del(&clk->node);
-        mutex_unlock(&clocks_mutex);
-}
-EXPORT_SYMBOL(clk_unregister);
-void clk_enable_init_clocks(void)
-{
-        struct clk *clkp;
-        list_for_each_entry(clkp, &clocks, node) {
-                if (clkp->flags & ENABLE_ON_INIT)
-                        clk_enable(clkp);
-        }
-}
-int omap_clk_enable_autoidle_all(void)
-{
-        struct clk *c;
-        unsigned long flags;
-        spin_lock_irqsave(&clockfw_lock, flags);
-        list_for_each_entry(c, &clocks, node)
-                if (c->ops->allow_idle)
-                        c->ops->allow_idle(c);
-        spin_unlock_irqrestore(&clockfw_lock, flags);
-        return 0;
-}
-int omap_clk_disable_autoidle_all(void)
-{
-        struct clk *c;
-        unsigned long flags;
-        spin_lock_irqsave(&clockfw_lock, flags);
-        list_for_each_entry(c, &clocks, node)
-                if (c->ops->deny_idle)
-                        c->ops->deny_idle(c);
-        spin_unlock_irqrestore(&clockfw_lock, flags);
-        return 0;
-}
-/*
- * Low level helpers
- */
-static int clkll_enable_null(struct clk *clk)
-{
-        return 0;
-}
-static void clkll_disable_null(struct clk *clk)
-{
-}
-const struct clkops clkops_null = {
-        .enable         = clkll_enable_null,
-        .disable        = clkll_disable_null,
-};
-/*
- * Dummy clock
- *
- * Used for clock aliases that are needed on some OMAPs, but not others
- */
-struct clk dummy_ck = {
-        .name   = "dummy",
-        .ops    = &clkops_null,
-};
-/*
- *
- */
-#ifdef CONFIG_OMAP_RESET_CLOCKS
-/*
- * Disable any unused clocks left on by the bootloader
- */
-static int __init clk_disable_unused(void)
-{
-        struct clk *ck;
-        unsigned long flags;
-        if (!arch_clock || !arch_clock->clk_disable_unused)
-                return 0;
-        pr_info("clock: disabling unused clocks to save power\n");
-        spin_lock_irqsave(&clockfw_lock, flags);
-        list_for_each_entry(ck, &clocks, node) {
-                if (ck->ops == &clkops_null)
-                        continue;
-                if (ck->usecount > 0 || !ck->enable_reg)
-                        continue;
-                arch_clock->clk_disable_unused(ck);
-        }
-        spin_unlock_irqrestore(&clockfw_lock, flags);
-        return 0;
-}
-late_initcall(clk_disable_unused);
-late_initcall(omap_clk_enable_autoidle_all);
-#endif
-int __init clk_init(struct clk_functions * custom_clocks)
-{
-        if (!custom_clocks) {
-                pr_err("No custom clock functions registered\n");
-                BUG();
-        }
-        arch_clock = custom_clocks;
-        return 0;
-}
-#if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS)
-/*
- *      debugfs support to trace clock tree hierarchy and attributes
- */
-#include <linux/debugfs.h>
-#include <linux/seq_file.h>
-static struct dentry *clk_debugfs_root;
-static int clk_dbg_show_summary(struct seq_file *s, void *unused)
-{
-        struct clk *c;
-        struct clk *pa;
-        mutex_lock(&clocks_mutex);
-        seq_printf(s, "%-30s %-30s %-10s %s\n",
-                "clock-name", "parent-name", "rate", "use-count");
-        list_for_each_entry(c, &clocks, node) {
-                pa = c->parent;
-                seq_printf(s, "%-30s %-30s %-10lu %d\n",
-                        c->name, pa ? pa->name : "none", c->rate, c->usecount);
-        }
-        mutex_unlock(&clocks_mutex);
-        return 0;
-}
-static int clk_dbg_open(struct inode *inode, struct file *file)
-{
-        return single_open(file, clk_dbg_show_summary, inode->i_private);
-}
-static const struct file_operations debug_clock_fops = {
-        .open           = clk_dbg_open,
-        .read           = seq_read,
-        .llseek         = seq_lseek,
-        .release        = single_release,
-};
-static int clk_debugfs_register_one(struct clk *c)
-{
-        int err;
-        struct dentry *d;
-        struct clk *pa = c->parent;
-        d = debugfs_create_dir(c->name, pa ? pa->dent : clk_debugfs_root);
-        if (!d)
-                return -ENOMEM;
-        c->dent = d;
-        d = debugfs_create_u8("usecount", S_IRUGO, c->dent, (u8 *)&c->usecount);
-        if (!d) {
-                err = -ENOMEM;
-                goto err_out;
-        }
-        d = debugfs_create_u32("rate", S_IRUGO, c->dent, (u32 *)&c->rate);
-        if (!d) {
-                err = -ENOMEM;
-                goto err_out;
-        }
-        d = debugfs_create_x32("flags", S_IRUGO, c->dent, (u32 *)&c->flags);
-        if (!d) {
-                err = -ENOMEM;
-                goto err_out;
-        }
-        return 0;
-err_out:
-        debugfs_remove_recursive(c->dent);
-        return err;
-}
-static int clk_debugfs_register(struct clk *c)
-{
-        int err;
-        struct clk *pa = c->parent;
-        if (pa && !pa->dent) {
-                err = clk_debugfs_register(pa);
-                if (err)
-                        return err;
-        }
-        if (!c->dent) {
-                err = clk_debugfs_register_one(c);
-                if (err)
-                        return err;
-        }
-        return 0;
-}
-static int __init clk_debugfs_init(void)
-{
-        struct clk *c;
-        struct dentry *d;
-        int err;
-        d = debugfs_create_dir("clock", NULL);
-        if (!d)
-                return -ENOMEM;
-        clk_debugfs_root = d;
-        list_for_each_entry(c, &clocks, node) {
-                err = clk_debugfs_register(c);
-                if (err)
-                        goto err_out;
-        }
-        d = debugfs_create_file("summary", S_IRUGO,
-                d, NULL, &debug_clock_fops);
-        if (!d)
-                return -ENOMEM;
-        return 0;
-err_out:
-        debugfs_remove_recursive(clk_debugfs_root);
-        return err;
-}
-late_initcall(clk_debugfs_init);
-#endif /* defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS) */
diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c
index 111315a69354..a1555e028123 100644
--- a/arch/arm/plat-omap/common.c
+++ b/arch/arm/plat-omap/common.c
@@ -16,20 +16,8 @@
 #include <linux/io.h>
 #include <linux/dma-mapping.h>
-#include <plat/common.h>
+#include "common.h"
-#include <plat/vram.h>
+#include <plat-omap/dma-omap.h>
-#include <linux/platform_data/dsp-omap.h>
-#include <plat/dma.h>
-#include <plat/omap-secure.h>
-void __init omap_reserve(void)
-{
-        omap_vram_reserve_sdram_memblock();
-        omap_dsp_reserve_sdram_memblock();
-        omap_secure_ram_reserve_memblock();
-        omap_barrier_reserve_memblock();
-}
 void __init omap_init_consistent_dma_size(void)
 {
@@ -37,12 +25,3 @@ void __init omap_init_consistent_dma_size(void)
        init_consistent_dma_size(CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE << 20);
 #endif
 }
-/*
- * Stub function for OMAP2 so that common files
- * continue to build when custom builds are used
- */
-int __weak omap_secure_ram_reserve_memblock(void)
-{
-        return 0;
-}
diff --git a/arch/arm/plat-omap/include/plat/common.h b/arch/arm/plat-omap/common.h
index d1cb6f527b7e..8ae0542a37d9 100644
--- a/arch/arm/plat-omap/include/plat/common.h
+++ b/arch/arm/plat-omap/common.h
@@ -1,7 +1,5 @@
 /*
- * arch/arm/plat-omap/include/mach/common.h
+ * Header for shared OMAP code in plat-omap.
- *
- * Header for code common to all OMAP machines.
 *
 * This program is free software; you can redistribute it and/or modify it
 * under the terms of the GNU General Public License as published by the
@@ -27,16 +25,12 @@
 #ifndef __ARCH_ARM_MACH_OMAP_COMMON_H
 #define __ARCH_ARM_MACH_OMAP_COMMON_H
-#include <plat/i2c.h>
-#include <plat/omap_hwmod.h>
 extern int __init omap_init_clocksource_32k(void __iomem *vbase);
 extern void __init omap_check_revision(void);
 extern void omap_reserve(void);
+struct omap_hwmod;
 extern int omap_dss_reset(struct omap_hwmod *);
-void omap_sram_init(void);
 #endif /* __ARCH_ARM_MACH_OMAP_COMMON_H */
diff --git a/arch/arm/plat-omap/counter_32k.c b/arch/arm/plat-omap/counter_32k.c
index 87ba8dd0d791..66bf3f9324fe 100644
--- a/arch/arm/plat-omap/counter_32k.c
+++ b/arch/arm/plat-omap/counter_32k.c
@@ -22,8 +22,7 @@
 #include <asm/mach/time.h>
 #include <asm/sched_clock.h>
-#include <plat/common.h>
+#include "common.h"
-#include <plat/clock.h>
 /* OMAP2_32KSYNCNT_CR_OFF: offset of 32ksync counter register */
 #define OMAP2_32KSYNCNT_REV_OFF         0x0
diff --git a/arch/arm/plat-omap/debug-leds.c b/arch/arm/plat-omap/debug-leds.c
index ea29bbe8e5cf..feca128bc8ed 100644
--- a/arch/arm/plat-omap/debug-leds.c
+++ b/arch/arm/plat-omap/debug-leds.c
@@ -20,7 +20,7 @@
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
-#include <plat/fpga.h>
+#include "fpga.h"
 /* Many OMAP development platforms reuse the same "debug board"; these
 * platforms include H2, H3, H4, and Perseus2.  There are 16 LEDs on the
diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index c76ed8bff838..49803cc18787 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -36,9 +36,10 @@
 #include <linux/slab.h>
 #include <linux/delay.h>
-#include <plat/cpu.h>
+#include <plat-omap/dma-omap.h>
-#include <plat/dma.h>
-#include <plat/tc.h>
+#include "../mach-omap1/soc.h"
+#include "../mach-omap2/soc.h"
 /*
 * MAX_LOGICAL_DMA_CH_COUNT: the maximum number of logical DMA
@@ -175,6 +176,7 @@ static inline void set_gdma_dev(int req, int dev)
 #define omap_writel(val, reg)   do {} while (0)
 #endif
+#ifdef CONFIG_ARCH_OMAP1
 void omap_set_dma_priority(int lch, int dst_port, int priority)
 {
        unsigned long reg;
@@ -203,18 +205,22 @@ void omap_set_dma_priority(int lch, int dst_port, int priority)
                l |= (priority & 0xf) << 8;
                omap_writel(l, reg);
        }
+}
+#endif
-        if (cpu_class_is_omap2()) {
+#ifdef CONFIG_ARCH_OMAP2PLUS
-                u32 ccr;
+void omap_set_dma_priority(int lch, int dst_port, int priority)
+{
+        u32 ccr;
-                ccr = p->dma_read(CCR, lch);
+        ccr = p->dma_read(CCR, lch);
-                if (priority)
+        if (priority)
-                        ccr |= (1 << 6);
+                ccr |= (1 << 6);
-                else
+        else
-                        ccr &= ~(1 << 6);
+                ccr &= ~(1 << 6);
-                p->dma_write(ccr, CCR, lch);
+        p->dma_write(ccr, CCR, lch);
-        }
 }
+#endif
 EXPORT_SYMBOL(omap_set_dma_priority);
 void omap_set_dma_transfer_params(int lch, int data_type, int elem_count,
diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c
index 938b50a33439..4a0b30a4ebda 100644
--- a/arch/arm/plat-omap/dmtimer.c
+++ b/arch/arm/plat-omap/dmtimer.c
@@ -42,10 +42,11 @@
 #include <linux/pm_runtime.h>
 #include <plat/dmtimer.h>
-#include <plat/omap-pm.h>
 #include <mach/hardware.h>
+#include "../mach-omap2/omap-pm.h"
 static u32 omap_reserved_systimers;
 static LIST_HEAD(omap_timer_list);
 static DEFINE_SPINLOCK(dm_timer_lock);
diff --git a/arch/arm/plat-omap/fb.c b/arch/arm/plat-omap/fb.c
index bcbb9d5dc293..f868caeedfd6 100644
--- a/arch/arm/plat-omap/fb.c
+++ b/arch/arm/plat-omap/fb.c
@@ -33,6 +33,67 @@
 #include <mach/hardware.h>
 #include <asm/mach/map.h>
+#include <plat/cpu.h>
+#ifdef CONFIG_OMAP2_VRFB
+/*
+ * The first memory resource is the register region for VRFB,
+ * the rest are VRFB virtual memory areas for each VRFB context.
+ */
+static const struct resource omap2_vrfb_resources[] = {
+        DEFINE_RES_MEM_NAMED(0x68008000u, 0x40, "vrfb-regs"),
+        DEFINE_RES_MEM_NAMED(0x70000000u, 0x4000000, "vrfb-area-0"),
+        DEFINE_RES_MEM_NAMED(0x74000000u, 0x4000000, "vrfb-area-1"),
+        DEFINE_RES_MEM_NAMED(0x78000000u, 0x4000000, "vrfb-area-2"),
+        DEFINE_RES_MEM_NAMED(0x7c000000u, 0x4000000, "vrfb-area-3"),
+};
+static const struct resource omap3_vrfb_resources[] = {
+        DEFINE_RES_MEM_NAMED(0x6C000180u, 0xc0, "vrfb-regs"),
+        DEFINE_RES_MEM_NAMED(0x70000000u, 0x4000000, "vrfb-area-0"),
+        DEFINE_RES_MEM_NAMED(0x74000000u, 0x4000000, "vrfb-area-1"),
+        DEFINE_RES_MEM_NAMED(0x78000000u, 0x4000000, "vrfb-area-2"),
+        DEFINE_RES_MEM_NAMED(0x7c000000u, 0x4000000, "vrfb-area-3"),
+        DEFINE_RES_MEM_NAMED(0xe0000000u, 0x4000000, "vrfb-area-4"),
+        DEFINE_RES_MEM_NAMED(0xe4000000u, 0x4000000, "vrfb-area-5"),
+        DEFINE_RES_MEM_NAMED(0xe8000000u, 0x4000000, "vrfb-area-6"),
+        DEFINE_RES_MEM_NAMED(0xec000000u, 0x4000000, "vrfb-area-7"),
+        DEFINE_RES_MEM_NAMED(0xf0000000u, 0x4000000, "vrfb-area-8"),
+        DEFINE_RES_MEM_NAMED(0xf4000000u, 0x4000000, "vrfb-area-9"),
+        DEFINE_RES_MEM_NAMED(0xf8000000u, 0x4000000, "vrfb-area-10"),
+        DEFINE_RES_MEM_NAMED(0xfc000000u, 0x4000000, "vrfb-area-11"),
+};
+static int __init omap_init_vrfb(void)
+{
+        struct platform_device *pdev;
+        const struct resource *res;
+        unsigned int num_res;
+        if (cpu_is_omap24xx()) {
+                res = omap2_vrfb_resources;
+                num_res = ARRAY_SIZE(omap2_vrfb_resources);
+        } else if (cpu_is_omap34xx()) {
+                res = omap3_vrfb_resources;
+                num_res = ARRAY_SIZE(omap3_vrfb_resources);
+        } else {
+                return 0;
+        }
+        pdev = platform_device_register_resndata(NULL, "omapvrfb", -1,
+                        res, num_res, NULL, 0);
+        if (IS_ERR(pdev))
+                return PTR_ERR(pdev);
+        else
+                return 0;
+}
+arch_initcall(omap_init_vrfb);
+#endif
 #if defined(CONFIG_FB_OMAP) || defined(CONFIG_FB_OMAP_MODULE)
 static bool omapfb_lcd_configured;
diff --git a/arch/arm/plat-omap/fpga.h b/arch/arm/plat-omap/fpga.h
new file mode 100644
index 000000000000..54faaa93e6f4
--- /dev/null
+++ b/arch/arm/plat-omap/fpga.h
@@ -0,0 +1,74 @@
+/*
+ * arch/arm/plat-omap/include/mach/fpga.h
+ *
+ * Interrupt handler for OMAP-1510 FPGA
+ *
+ * Copyright (C) 2001 RidgeRun, Inc.
+ * Author: Greg Lonnon <glonnon@ridgerun.com>
+ *
+ * Copyright (C) 2002 MontaVista Software, Inc.
+ *
+ * Separated FPGA interrupts from innovator1510.c and cleaned up for 2.6
+ * Copyright (C) 2004 Nokia Corporation by Tony Lindrgen <tony@atomide.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_OMAP_FPGA_H
+#define __ASM_ARCH_OMAP_FPGA_H
+/*
+ * ---------------------------------------------------------------------------
+ *  H2/P2 Debug board FPGA
+ * ---------------------------------------------------------------------------
+ */
+/* maps in the FPGA registers and the ETHR registers */
+#define H2P2_DBG_FPGA_BASE              0xE8000000              /* VA */
+#define H2P2_DBG_FPGA_SIZE              SZ_4K                   /* SIZE */
+#define H2P2_DBG_FPGA_START             0x04000000              /* PA */
+#define H2P2_DBG_FPGA_ETHR_START        (H2P2_DBG_FPGA_START + 0x300)
+#define H2P2_DBG_FPGA_FPGA_REV          IOMEM(H2P2_DBG_FPGA_BASE + 0x10)        /* FPGA Revision */
+#define H2P2_DBG_FPGA_BOARD_REV         IOMEM(H2P2_DBG_FPGA_BASE + 0x12)        /* Board Revision */
+#define H2P2_DBG_FPGA_GPIO              IOMEM(H2P2_DBG_FPGA_BASE + 0x14)        /* GPIO outputs */
+#define H2P2_DBG_FPGA_LEDS              IOMEM(H2P2_DBG_FPGA_BASE + 0x16)        /* LEDs outputs */
+#define H2P2_DBG_FPGA_MISC_INPUTS       IOMEM(H2P2_DBG_FPGA_BASE + 0x18)        /* Misc inputs */
+#define H2P2_DBG_FPGA_LAN_STATUS        IOMEM(H2P2_DBG_FPGA_BASE + 0x1A)        /* LAN Status line */
+#define H2P2_DBG_FPGA_LAN_RESET         IOMEM(H2P2_DBG_FPGA_BASE + 0x1C)        /* LAN Reset line */
+/* NOTE:  most boards don't have a static mapping for the FPGA ... */
+struct h2p2_dbg_fpga {
+        /* offset 0x00 */
+        u16             smc91x[8];
+        /* offset 0x10 */
+        u16             fpga_rev;
+        u16             board_rev;
+        u16             gpio_outputs;
+        u16             leds;
+        /* offset 0x18 */
+        u16             misc_inputs;
+        u16             lan_status;
+        u16             lan_reset;
+        u16             reserved0;
+        /* offset 0x20 */
+        u16             ps2_data;
+        u16             ps2_ctrl;
+        /* plus also 4 rs232 ports ... */
+};
+/* LEDs definition on debug board (16 LEDs, all physically green) */
+#define H2P2_DBG_FPGA_LED_GREEN         (1 << 15)
+#define H2P2_DBG_FPGA_LED_AMBER         (1 << 14)
+#define H2P2_DBG_FPGA_LED_RED           (1 << 13)
+#define H2P2_DBG_FPGA_LED_BLUE          (1 << 12)
+/*  cpu0 load-meter LEDs */
+#define H2P2_DBG_FPGA_LOAD_METER        (1 << 0)        // A bit of fun on our board ...
+#define H2P2_DBG_FPGA_LOAD_METER_SIZE   11
+#define H2P2_DBG_FPGA_LOAD_METER_MASK   ((1 << H2P2_DBG_FPGA_LOAD_METER_SIZE) - 1)
+#define H2P2_DBG_FPGA_P2_LED_TIMER              (1 << 0)
+#define H2P2_DBG_FPGA_P2_LED_IDLE               (1 << 1)
+#endif
diff --git a/arch/arm/plat-omap/i2c.c b/arch/arm/plat-omap/i2c.c
index a5683a84c6ee..be6deb7c12ec 100644
--- a/arch/arm/plat-omap/i2c.c
+++ b/arch/arm/plat-omap/i2c.c
@@ -26,52 +26,20 @@
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
 #include <linux/i2c.h>
+#include <linux/i2c-omap.h>
 #include <linux/slab.h>
 #include <linux/err.h>
 #include <linux/clk.h>
 #include <mach/irqs.h>
-#include <plat/i2c.h>
-#include <plat/omap_device.h>
-#define OMAP_I2C_SIZE           0x3f
+#include "../mach-omap1/soc.h"
-#define OMAP1_I2C_BASE          0xfffb3800
+#include "../mach-omap2/soc.h"
-#define OMAP1_INT_I2C           (32 + 4)
-static const char name[] = "omap_i2c";
+#include "i2c.h"
-#define I2C_RESOURCE_BUILDER(base, irq)                 \
-        {                                               \
-                .start  = (base),                       \
-                .end    = (base) + OMAP_I2C_SIZE,       \
-                .flags  = IORESOURCE_MEM,               \
-        },                                              \
-        {                                               \
-                .start  = (irq),                        \
-                .flags  = IORESOURCE_IRQ,               \
-        },
-static struct resource i2c_resources[][2] = {
-        { I2C_RESOURCE_BUILDER(0, 0) },
-};
-#define I2C_DEV_BUILDER(bus_id, res, data)              \
-        {                                               \
-                .id     = (bus_id),                     \
-                .name   = name,                         \
-                .num_resources  = ARRAY_SIZE(res),      \
-                .resource       = (res),                \
-                .dev            = {                     \
-                        .platform_data  = (data),       \
-                },                                      \
-        }
-#define MAX_OMAP_I2C_HWMOD_NAME_LEN     16
 #define OMAP_I2C_MAX_CONTROLLERS 4
 static struct omap_i2c_bus_platform_data i2c_pdata[OMAP_I2C_MAX_CONTROLLERS];
-static struct platform_device omap_i2c_devices[] = {
-        I2C_DEV_BUILDER(1, i2c_resources[0], &i2c_pdata[0]),
-};
 #define OMAP_I2C_CMDLINE_SETUP  (BIT(31))
@@ -91,95 +59,6 @@ static int __init omap_i2c_nr_ports(void)
        return ports;
 }
-static inline int omap1_i2c_add_bus(int bus_id)
-{
-        struct platform_device *pdev;
-        struct omap_i2c_bus_platform_data *pdata;
-        struct resource *res;
-        omap1_i2c_mux_pins(bus_id);
-        pdev = &omap_i2c_devices[bus_id - 1];
-        res = pdev->resource;
-        res[0].start = OMAP1_I2C_BASE;
-        res[0].end = res[0].start + OMAP_I2C_SIZE;
-        res[1].start = OMAP1_INT_I2C;
-        pdata = &i2c_pdata[bus_id - 1];
-        /* all OMAP1 have IP version 1 register set */
-        pdata->rev = OMAP_I2C_IP_VERSION_1;
-        /* all OMAP1 I2C are implemented like this */
-        pdata->flags = OMAP_I2C_FLAG_NO_FIFO |
-                       OMAP_I2C_FLAG_SIMPLE_CLOCK |
-                       OMAP_I2C_FLAG_16BIT_DATA_REG |
-                       OMAP_I2C_FLAG_ALWAYS_ARMXOR_CLK;
-        /* how the cpu bus is wired up differs for 7xx only */
-        if (cpu_is_omap7xx())
-                pdata->flags |= OMAP_I2C_FLAG_BUS_SHIFT_1;
-        else
-                pdata->flags |= OMAP_I2C_FLAG_BUS_SHIFT_2;
-        return platform_device_register(pdev);
-}
-#ifdef CONFIG_ARCH_OMAP2PLUS
-static inline int omap2_i2c_add_bus(int bus_id)
-{
-        int l;
-        struct omap_hwmod *oh;
-        struct platform_device *pdev;
-        char oh_name[MAX_OMAP_I2C_HWMOD_NAME_LEN];
-        struct omap_i2c_bus_platform_data *pdata;
-        struct omap_i2c_dev_attr *dev_attr;
-        omap2_i2c_mux_pins(bus_id);
-        l = snprintf(oh_name, MAX_OMAP_I2C_HWMOD_NAME_LEN, "i2c%d", bus_id);
-        WARN(l >= MAX_OMAP_I2C_HWMOD_NAME_LEN,
-                "String buffer overflow in I2C%d device setup\n", bus_id);
-        oh = omap_hwmod_lookup(oh_name);
-        if (!oh) {
-                        pr_err("Could not look up %s\n", oh_name);
-                        return -EEXIST;
-        }
-        pdata = &i2c_pdata[bus_id - 1];
-        /*
-         * pass the hwmod class's CPU-specific knowledge of I2C IP revision in
-         * use, and functionality implementation flags, up to the OMAP I2C
-         * driver via platform data
-         */
-        pdata->rev = oh->class->rev;
-        dev_attr = (struct omap_i2c_dev_attr *)oh->dev_attr;
-        pdata->flags = dev_attr->flags;
-        pdev = omap_device_build(name, bus_id, oh, pdata,
-                        sizeof(struct omap_i2c_bus_platform_data),
-                        NULL, 0, 0);
-        WARN(IS_ERR(pdev), "Could not build omap_device for %s\n", name);
-        return PTR_RET(pdev);
-}
-#else
-static inline int omap2_i2c_add_bus(int bus_id)
-{
-        return 0;
-}
-#endif
-static int __init omap_i2c_add_bus(int bus_id)
-{
-        if (cpu_class_is_omap1())
-                return omap1_i2c_add_bus(bus_id);
-        else
-                return omap2_i2c_add_bus(bus_id);
-}
 /**
 * omap_i2c_bus_setup - Process command line options for the I2C bus speed
 * @str: String of options
@@ -218,7 +97,7 @@ static int __init omap_register_i2c_bus_cmdline(void)
        for (i = 0; i < ARRAY_SIZE(i2c_pdata); i++)
                if (i2c_pdata[i].clkrate & OMAP_I2C_CMDLINE_SETUP) {
                        i2c_pdata[i].clkrate &= ~OMAP_I2C_CMDLINE_SETUP;
-                        err = omap_i2c_add_bus(i + 1);
+                        err = omap_i2c_add_bus(&i2c_pdata[i], i + 1);
                        if (err)
                                goto out;
                }
@@ -256,5 +135,5 @@ int __init omap_register_i2c_bus(int bus_id, u32 clkrate,
        i2c_pdata[bus_id - 1].clkrate &= ~OMAP_I2C_CMDLINE_SETUP;
-        return omap_i2c_add_bus(bus_id);
+        return omap_i2c_add_bus(&i2c_pdata[bus_id - 1], bus_id);
 }
diff --git a/arch/arm/plat-omap/i2c.h b/arch/arm/plat-omap/i2c.h
new file mode 100644
index 000000000000..7a9028cb5a75
--- /dev/null
+++ b/arch/arm/plat-omap/i2c.h
@@ -0,0 +1,47 @@
+/*
+ * Helper module for board specific I2C bus registration
+ *
+ * Copyright (C) 2009 Nokia Corporation.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+#ifndef __PLAT_OMAP_I2C_H
+#define __PLAT_OMAP_I2C_H
+struct i2c_board_info;
+struct omap_i2c_bus_platform_data;
+int omap_i2c_add_bus(struct omap_i2c_bus_platform_data *i2c_pdata,
+                        int bus_id);
+#if defined(CONFIG_I2C_OMAP) || defined(CONFIG_I2C_OMAP_MODULE)
+extern int omap_register_i2c_bus(int bus_id, u32 clkrate,
+                                 struct i2c_board_info const *info,
+                                 unsigned len);
+#else
+static inline int omap_register_i2c_bus(int bus_id, u32 clkrate,
+                                 struct i2c_board_info const *info,
+                                 unsigned len)
+{
+        return 0;
+}
+#endif
+struct omap_hwmod;
+int omap_i2c_reset(struct omap_hwmod *oh);
+#endif /* __PLAT_OMAP_I2C_H */
diff --git a/arch/arm/plat-omap/include/plat/dma.h b/arch/arm/plat-omap/include/plat-omap/dma-omap.h
index 0a87b052f8f7..222be7e934e5 100644
--- a/arch/arm/plat-omap/include/plat/dma.h
+++ b/arch/arm/plat-omap/include/plat-omap/dma-omap.h
@@ -1,5 +1,5 @@
 /*
- *  arch/arm/plat-omap/include/mach/dma.h
+ *  OMAP DMA handling defines and function
 *
 *  Copyright (C) 2003 Nokia Corporation
 *  Author: Juha Yrjölä <juha.yrjola@nokia.com>
@@ -23,187 +23,8 @@
 #include <linux/platform_device.h>
-/*
- * TODO: These dma channel defines should go away once all
- * the omap drivers hwmod adapted.
- */
-/* Move omap4 specific defines to dma-44xx.h */
-#include "dma-44xx.h"
 #define INT_DMA_LCD                     25
-/* DMA channels for omap1 */
-#define OMAP_DMA_NO_DEVICE              0
-#define OMAP_DMA_MCSI1_TX               1
-#define OMAP_DMA_MCSI1_RX               2
-#define OMAP_DMA_I2C_RX                 3
-#define OMAP_DMA_I2C_TX                 4
-#define OMAP_DMA_EXT_NDMA_REQ           5
-#define OMAP_DMA_EXT_NDMA_REQ2          6
-#define OMAP_DMA_UWIRE_TX               7
-#define OMAP_DMA_MCBSP1_TX              8
-#define OMAP_DMA_MCBSP1_RX              9
-#define OMAP_DMA_MCBSP3_TX              10
-#define OMAP_DMA_MCBSP3_RX              11
-#define OMAP_DMA_UART1_TX               12
-#define OMAP_DMA_UART1_RX               13
-#define OMAP_DMA_UART2_TX               14
-#define OMAP_DMA_UART2_RX               15
-#define OMAP_DMA_MCBSP2_TX              16
-#define OMAP_DMA_MCBSP2_RX              17
-#define OMAP_DMA_UART3_TX               18
-#define OMAP_DMA_UART3_RX               19
-#define OMAP_DMA_CAMERA_IF_RX           20
-#define OMAP_DMA_MMC_TX                 21
-#define OMAP_DMA_MMC_RX                 22
-#define OMAP_DMA_NAND                   23
-#define OMAP_DMA_IRQ_LCD_LINE           24
-#define OMAP_DMA_MEMORY_STICK           25
-#define OMAP_DMA_USB_W2FC_RX0           26
-#define OMAP_DMA_USB_W2FC_RX1           27
-#define OMAP_DMA_USB_W2FC_RX2           28
-#define OMAP_DMA_USB_W2FC_TX0           29
-#define OMAP_DMA_USB_W2FC_TX1           30
-#define OMAP_DMA_USB_W2FC_TX2           31
-/* These are only for 1610 */
-#define OMAP_DMA_CRYPTO_DES_IN          32
-#define OMAP_DMA_SPI_TX                 33
-#define OMAP_DMA_SPI_RX                 34
-#define OMAP_DMA_CRYPTO_HASH            35
-#define OMAP_DMA_CCP_ATTN               36
-#define OMAP_DMA_CCP_FIFO_NOT_EMPTY     37
-#define OMAP_DMA_CMT_APE_TX_CHAN_0      38
-#define OMAP_DMA_CMT_APE_RV_CHAN_0      39
-#define OMAP_DMA_CMT_APE_TX_CHAN_1      40
-#define OMAP_DMA_CMT_APE_RV_CHAN_1      41
-#define OMAP_DMA_CMT_APE_TX_CHAN_2      42
-#define OMAP_DMA_CMT_APE_RV_CHAN_2      43
-#define OMAP_DMA_CMT_APE_TX_CHAN_3      44
-#define OMAP_DMA_CMT_APE_RV_CHAN_3      45
-#define OMAP_DMA_CMT_APE_TX_CHAN_4      46
-#define OMAP_DMA_CMT_APE_RV_CHAN_4      47
-#define OMAP_DMA_CMT_APE_TX_CHAN_5      48
-#define OMAP_DMA_CMT_APE_RV_CHAN_5      49
-#define OMAP_DMA_CMT_APE_TX_CHAN_6      50
-#define OMAP_DMA_CMT_APE_RV_CHAN_6      51
-#define OMAP_DMA_CMT_APE_TX_CHAN_7      52
-#define OMAP_DMA_CMT_APE_RV_CHAN_7      53
-#define OMAP_DMA_MMC2_TX                54
-#define OMAP_DMA_MMC2_RX                55
-#define OMAP_DMA_CRYPTO_DES_OUT         56
-/* DMA channels for 24xx */
-#define OMAP24XX_DMA_NO_DEVICE          0
-#define OMAP24XX_DMA_XTI_DMA            1       /* S_DMA_0 */
-#define OMAP24XX_DMA_EXT_DMAREQ0        2       /* S_DMA_1 */
-#define OMAP24XX_DMA_EXT_DMAREQ1        3       /* S_DMA_2 */
-#define OMAP24XX_DMA_GPMC               4       /* S_DMA_3 */
-#define OMAP24XX_DMA_GFX                5       /* S_DMA_4 */
-#define OMAP24XX_DMA_DSS                6       /* S_DMA_5 */
-#define OMAP242X_DMA_VLYNQ_TX           7       /* S_DMA_6 */
-#define OMAP24XX_DMA_EXT_DMAREQ2        7       /* S_DMA_6 */
-#define OMAP24XX_DMA_CWT                8       /* S_DMA_7 */
-#define OMAP24XX_DMA_AES_TX             9       /* S_DMA_8 */
-#define OMAP24XX_DMA_AES_RX             10      /* S_DMA_9 */
-#define OMAP24XX_DMA_DES_TX             11      /* S_DMA_10 */
-#define OMAP24XX_DMA_DES_RX             12      /* S_DMA_11 */
-#define OMAP24XX_DMA_SHA1MD5_RX         13      /* S_DMA_12 */
-#define OMAP34XX_DMA_SHA2MD5_RX         13      /* S_DMA_12 */
-#define OMAP242X_DMA_EXT_DMAREQ2        14      /* S_DMA_13 */
-#define OMAP242X_DMA_EXT_DMAREQ3        15      /* S_DMA_14 */
-#define OMAP242X_DMA_EXT_DMAREQ4        16      /* S_DMA_15 */
-#define OMAP242X_DMA_EAC_AC_RD          17      /* S_DMA_16 */
-#define OMAP242X_DMA_EAC_AC_WR          18      /* S_DMA_17 */
-#define OMAP242X_DMA_EAC_MD_UL_RD       19      /* S_DMA_18 */
-#define OMAP242X_DMA_EAC_MD_UL_WR       20      /* S_DMA_19 */
-#define OMAP242X_DMA_EAC_MD_DL_RD       21      /* S_DMA_20 */
-#define OMAP242X_DMA_EAC_MD_DL_WR       22      /* S_DMA_21 */
-#define OMAP242X_DMA_EAC_BT_UL_RD       23      /* S_DMA_22 */
-#define OMAP242X_DMA_EAC_BT_UL_WR       24      /* S_DMA_23 */
-#define OMAP242X_DMA_EAC_BT_DL_RD       25      /* S_DMA_24 */
-#define OMAP242X_DMA_EAC_BT_DL_WR       26      /* S_DMA_25 */
-#define OMAP243X_DMA_EXT_DMAREQ3        14      /* S_DMA_13 */
-#define OMAP24XX_DMA_SPI3_TX0           15      /* S_DMA_14 */
-#define OMAP24XX_DMA_SPI3_RX0           16      /* S_DMA_15 */
-#define OMAP24XX_DMA_MCBSP3_TX          17      /* S_DMA_16 */
-#define OMAP24XX_DMA_MCBSP3_RX          18      /* S_DMA_17 */
-#define OMAP24XX_DMA_MCBSP4_TX          19      /* S_DMA_18 */
-#define OMAP24XX_DMA_MCBSP4_RX          20      /* S_DMA_19 */
-#define OMAP24XX_DMA_MCBSP5_TX          21      /* S_DMA_20 */
-#define OMAP24XX_DMA_MCBSP5_RX          22      /* S_DMA_21 */
-#define OMAP24XX_DMA_SPI3_TX1           23      /* S_DMA_22 */
-#define OMAP24XX_DMA_SPI3_RX1           24      /* S_DMA_23 */
-#define OMAP243X_DMA_EXT_DMAREQ4        25      /* S_DMA_24 */
-#define OMAP243X_DMA_EXT_DMAREQ5        26      /* S_DMA_25 */
-#define OMAP34XX_DMA_I2C3_TX            25      /* S_DMA_24 */
-#define OMAP34XX_DMA_I2C3_RX            26      /* S_DMA_25 */
-#define OMAP24XX_DMA_I2C1_TX            27      /* S_DMA_26 */
-#define OMAP24XX_DMA_I2C1_RX            28      /* S_DMA_27 */
-#define OMAP24XX_DMA_I2C2_TX            29      /* S_DMA_28 */
-#define OMAP24XX_DMA_I2C2_RX            30      /* S_DMA_29 */
-#define OMAP24XX_DMA_MCBSP1_TX          31      /* S_DMA_30 */
-#define OMAP24XX_DMA_MCBSP1_RX          32      /* S_DMA_31 */
-#define OMAP24XX_DMA_MCBSP2_TX          33      /* S_DMA_32 */
-#define OMAP24XX_DMA_MCBSP2_RX          34      /* S_DMA_33 */
-#define OMAP24XX_DMA_SPI1_TX0           35      /* S_DMA_34 */
-#define OMAP24XX_DMA_SPI1_RX0           36      /* S_DMA_35 */
-#define OMAP24XX_DMA_SPI1_TX1           37      /* S_DMA_36 */
-#define OMAP24XX_DMA_SPI1_RX1           38      /* S_DMA_37 */
-#define OMAP24XX_DMA_SPI1_TX2           39      /* S_DMA_38 */
-#define OMAP24XX_DMA_SPI1_RX2           40      /* S_DMA_39 */
-#define OMAP24XX_DMA_SPI1_TX3           41      /* S_DMA_40 */
-#define OMAP24XX_DMA_SPI1_RX3           42      /* S_DMA_41 */
-#define OMAP24XX_DMA_SPI2_TX0           43      /* S_DMA_42 */
-#define OMAP24XX_DMA_SPI2_RX0           44      /* S_DMA_43 */
-#define OMAP24XX_DMA_SPI2_TX1           45      /* S_DMA_44 */
-#define OMAP24XX_DMA_SPI2_RX1           46      /* S_DMA_45 */
-#define OMAP24XX_DMA_MMC2_TX            47      /* S_DMA_46 */
-#define OMAP24XX_DMA_MMC2_RX            48      /* S_DMA_47 */
-#define OMAP24XX_DMA_UART1_TX           49      /* S_DMA_48 */
-#define OMAP24XX_DMA_UART1_RX           50      /* S_DMA_49 */
-#define OMAP24XX_DMA_UART2_TX           51      /* S_DMA_50 */
-#define OMAP24XX_DMA_UART2_RX           52      /* S_DMA_51 */
-#define OMAP24XX_DMA_UART3_TX           53      /* S_DMA_52 */
-#define OMAP24XX_DMA_UART3_RX           54      /* S_DMA_53 */
-#define OMAP24XX_DMA_USB_W2FC_TX0       55      /* S_DMA_54 */
-#define OMAP24XX_DMA_USB_W2FC_RX0       56      /* S_DMA_55 */
-#define OMAP24XX_DMA_USB_W2FC_TX1       57      /* S_DMA_56 */
-#define OMAP24XX_DMA_USB_W2FC_RX1       58      /* S_DMA_57 */
-#define OMAP24XX_DMA_USB_W2FC_TX2       59      /* S_DMA_58 */
-#define OMAP24XX_DMA_USB_W2FC_RX2       60      /* S_DMA_59 */
-#define OMAP24XX_DMA_MMC1_TX            61      /* S_DMA_60 */
-#define OMAP24XX_DMA_MMC1_RX            62      /* S_DMA_61 */
-#define OMAP24XX_DMA_MS                 63      /* S_DMA_62 */
-#define OMAP242X_DMA_EXT_DMAREQ5        64      /* S_DMA_63 */
-#define OMAP243X_DMA_EXT_DMAREQ6        64      /* S_DMA_63 */
-#define OMAP34XX_DMA_EXT_DMAREQ3        64      /* S_DMA_63 */
-#define OMAP34XX_DMA_AES2_TX            65      /* S_DMA_64 */
-#define OMAP34XX_DMA_AES2_RX            66      /* S_DMA_65 */
-#define OMAP34XX_DMA_DES2_TX            67      /* S_DMA_66 */
-#define OMAP34XX_DMA_DES2_RX            68      /* S_DMA_67 */
-#define OMAP34XX_DMA_SHA1MD5_RX         69      /* S_DMA_68 */
-#define OMAP34XX_DMA_SPI4_TX0           70      /* S_DMA_69 */
-#define OMAP34XX_DMA_SPI4_RX0           71      /* S_DMA_70 */
-#define OMAP34XX_DSS_DMA0               72      /* S_DMA_71 */
-#define OMAP34XX_DSS_DMA1               73      /* S_DMA_72 */
-#define OMAP34XX_DSS_DMA2               74      /* S_DMA_73 */
-#define OMAP34XX_DSS_DMA3               75      /* S_DMA_74 */
-#define OMAP34XX_DMA_MMC3_TX            77      /* S_DMA_76 */
-#define OMAP34XX_DMA_MMC3_RX            78      /* S_DMA_77 */
-#define OMAP34XX_DMA_USIM_TX            79      /* S_DMA_78 */
-#define OMAP34XX_DMA_USIM_RX            80      /* S_DMA_79 */
-#define OMAP36XX_DMA_UART4_TX           81      /* S_DMA_80 */
-#define OMAP36XX_DMA_UART4_RX           82      /* S_DMA_81 */
-/* Only for AM35xx */
-#define AM35XX_DMA_UART4_TX             54
-#define AM35XX_DMA_UART4_RX             55
-/*----------------------------------------------------------------------------*/
 #define OMAP1_DMA_TOUT_IRQ              (1 << 0)
 #define OMAP_DMA_DROP_IRQ               (1 << 1)
 #define OMAP_DMA_HALF_IRQ               (1 << 2)
diff --git a/arch/arm/plat-omap/include/plat/clkdev_omap.h b/arch/arm/plat-omap/include/plat/clkdev_omap.h
deleted file mode 100644
index 025d85a3ee86..000000000000
--- a/arch/arm/plat-omap/include/plat/clkdev_omap.h
+++ /dev/null
@@ -1,51 +0,0 @@
-/*
- * clkdev <-> OMAP integration
- *
- * Russell King <linux@arm.linux.org.uk>
- *
- */
-#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_PLAT_CLKDEV_OMAP_H
-#define __ARCH_ARM_PLAT_OMAP_INCLUDE_PLAT_CLKDEV_OMAP_H
-#include <linux/clkdev.h>
-struct omap_clk {
-        u16                             cpu;
-        struct clk_lookup               lk;
-};
-#define CLK(dev, con, ck, cp)           \
-        {                               \
-                 .cpu = cp,             \
-                .lk = {                 \
-                        .dev_id = dev,  \
-                        .con_id = con,  \
-                        .clk = ck,      \
-                },                      \
-        }
-/* Platform flags for the clkdev-OMAP integration code */
-#define CK_310          (1 << 0)
-#define CK_7XX          (1 << 1)        /* 7xx, 850 */
-#define CK_1510         (1 << 2)
-#define CK_16XX         (1 << 3)        /* 16xx, 17xx, 5912 */
-#define CK_242X         (1 << 4)
-#define CK_243X         (1 << 5)        /* 243x, 253x */
-#define CK_3430ES1      (1 << 6)        /* 34xxES1 only */
-#define CK_3430ES2PLUS  (1 << 7)        /* 34xxES2, ES3, non-Sitara 35xx only */
-#define CK_AM35XX       (1 << 9)        /* Sitara AM35xx */
-#define CK_36XX         (1 << 10)       /* 36xx/37xx-specific clocks */
-#define CK_443X         (1 << 11)
-#define CK_TI816X       (1 << 12)
-#define CK_446X         (1 << 13)
-#define CK_AM33XX       (1 << 14)       /* AM33xx specific clocks */
-#define CK_1710         (1 << 15)       /* 1710 extra for rate selection */
-#define CK_34XX         (CK_3430ES1 | CK_3430ES2PLUS)
-#define CK_3XXX         (CK_34XX | CK_AM35XX | CK_36XX)
-#endif
diff --git a/arch/arm/plat-omap/include/plat/clock.h b/arch/arm/plat-omap/include/plat/clock.h
deleted file mode 100644
index e2e2d045e428..000000000000
--- a/arch/arm/plat-omap/include/plat/clock.h
+++ /dev/null
@@ -1,309 +0,0 @@
-/*
- * OMAP clock: data structure definitions, function prototypes, shared macros
- *
- * Copyright (C) 2004-2005, 2008-2010 Nokia Corporation
- * Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
- * Based on clocks.h by Tony Lindgren, Gordon McNutt and RidgeRun, Inc
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ARCH_ARM_OMAP_CLOCK_H
-#define __ARCH_ARM_OMAP_CLOCK_H
-#include <linux/list.h>
-struct module;
-struct clk;
-struct clockdomain;
-/* Temporary, needed during the common clock framework conversion */
-#define __clk_get_name(clk)     (clk->name)
-#define __clk_get_parent(clk)   (clk->parent)
-#define __clk_get_rate(clk)     (clk->rate)
-/**
- * struct clkops - some clock function pointers
- * @enable: fn ptr that enables the current clock in hardware
- * @disable: fn ptr that enables the current clock in hardware
- * @find_idlest: function returning the IDLEST register for the clock's IP blk
- * @find_companion: function returning the "companion" clk reg for the clock
- * @allow_idle: fn ptr that enables autoidle for the current clock in hardware
- * @deny_idle: fn ptr that disables autoidle for the current clock in hardware
- *
- * A "companion" clk is an accompanying clock to the one being queried
- * that must be enabled for the IP module connected to the clock to
- * become accessible by the hardware.  Neither @find_idlest nor
- * @find_companion should be needed; that information is IP
- * block-specific; the hwmod code has been created to handle this, but
- * until hwmod data is ready and drivers have been converted to use PM
- * runtime calls in place of clk_enable()/clk_disable(), @find_idlest and
- * @find_companion must, unfortunately, remain.
- */
-struct clkops {
-        int                     (*enable)(struct clk *);
-        void                    (*disable)(struct clk *);
-        void                    (*find_idlest)(struct clk *, void __iomem **,
-                                               u8 *, u8 *);
-        void                    (*find_companion)(struct clk *, void __iomem **,
-                                                  u8 *);
-        void                    (*allow_idle)(struct clk *);
-        void                    (*deny_idle)(struct clk *);
-};
-#ifdef CONFIG_ARCH_OMAP2PLUS
-/* struct clksel_rate.flags possibilities */
-#define RATE_IN_242X            (1 << 0)
-#define RATE_IN_243X            (1 << 1)
-#define RATE_IN_3430ES1         (1 << 2)        /* 3430ES1 rates only */
-#define RATE_IN_3430ES2PLUS     (1 << 3)        /* 3430 ES >= 2 rates only */
-#define RATE_IN_36XX            (1 << 4)
-#define RATE_IN_4430            (1 << 5)
-#define RATE_IN_TI816X          (1 << 6)
-#define RATE_IN_4460            (1 << 7)
-#define RATE_IN_AM33XX          (1 << 8)
-#define RATE_IN_TI814X          (1 << 9)
-#define RATE_IN_24XX            (RATE_IN_242X | RATE_IN_243X)
-#define RATE_IN_34XX            (RATE_IN_3430ES1 | RATE_IN_3430ES2PLUS)
-#define RATE_IN_3XXX            (RATE_IN_34XX | RATE_IN_36XX)
-#define RATE_IN_44XX            (RATE_IN_4430 | RATE_IN_4460)
-/* RATE_IN_3430ES2PLUS_36XX includes 34xx/35xx with ES >=2, and all 36xx/37xx */
-#define RATE_IN_3430ES2PLUS_36XX        (RATE_IN_3430ES2PLUS | RATE_IN_36XX)
-/**
- * struct clksel_rate - register bitfield values corresponding to clk divisors
- * @val: register bitfield value (shifted to bit 0)
- * @div: clock divisor corresponding to @val
- * @flags: (see "struct clksel_rate.flags possibilities" above)
- *
- * @val should match the value of a read from struct clk.clksel_reg
- * AND'ed with struct clk.clksel_mask, shifted right to bit 0.
- *
- * @div is the divisor that should be applied to the parent clock's rate
- * to produce the current clock's rate.
- */
-struct clksel_rate {
-        u32                     val;
-        u8                      div;
-        u16                     flags;
-};
-/**
- * struct clksel - available parent clocks, and a pointer to their divisors
- * @parent: struct clk * to a possible parent clock
- * @rates: available divisors for this parent clock
- *
- * A struct clksel is always associated with one or more struct clks
- * and one or more struct clksel_rates.
- */
-struct clksel {
-        struct clk               *parent;
-        const struct clksel_rate *rates;
-};
-/**
- * struct dpll_data - DPLL registers and integration data
- * @mult_div1_reg: register containing the DPLL M and N bitfields
- * @mult_mask: mask of the DPLL M bitfield in @mult_div1_reg
- * @div1_mask: mask of the DPLL N bitfield in @mult_div1_reg
- * @clk_bypass: struct clk pointer to the clock's bypass clock input
- * @clk_ref: struct clk pointer to the clock's reference clock input
- * @control_reg: register containing the DPLL mode bitfield
- * @enable_mask: mask of the DPLL mode bitfield in @control_reg
- * @last_rounded_rate: cache of the last rate result of omap2_dpll_round_rate()
- * @last_rounded_m: cache of the last M result of omap2_dpll_round_rate()
- * @max_multiplier: maximum valid non-bypass multiplier value (actual)
- * @last_rounded_n: cache of the last N result of omap2_dpll_round_rate()
- * @min_divider: minimum valid non-bypass divider value (actual)
- * @max_divider: maximum valid non-bypass divider value (actual)
- * @modes: possible values of @enable_mask
- * @autoidle_reg: register containing the DPLL autoidle mode bitfield
- * @idlest_reg: register containing the DPLL idle status bitfield
- * @autoidle_mask: mask of the DPLL autoidle mode bitfield in @autoidle_reg
- * @freqsel_mask: mask of the DPLL jitter correction bitfield in @control_reg
- * @idlest_mask: mask of the DPLL idle status bitfield in @idlest_reg
- * @auto_recal_bit: bitshift of the driftguard enable bit in @control_reg
- * @recal_en_bit: bitshift of the PRM_IRQENABLE_* bit for recalibration IRQs
- * @recal_st_bit: bitshift of the PRM_IRQSTATUS_* bit for recalibration IRQs
- * @flags: DPLL type/features (see below)
- *
- * Possible values for @flags:
- * DPLL_J_TYPE: "J-type DPLL" (only some 36xx, 4xxx DPLLs)
- *
- * @freqsel_mask is only used on the OMAP34xx family and AM35xx.
- *
- * XXX Some DPLLs have multiple bypass inputs, so it's not technically
- * correct to only have one @clk_bypass pointer.
- *
- * XXX The runtime-variable fields (@last_rounded_rate, @last_rounded_m,
- * @last_rounded_n) should be separated from the runtime-fixed fields
- * and placed into a different structure, so that the runtime-fixed data
- * can be placed into read-only space.
- */
-struct dpll_data {
-        void __iomem            *mult_div1_reg;
-        u32                     mult_mask;
-        u32                     div1_mask;
-        struct clk              *clk_bypass;
-        struct clk              *clk_ref;
-        void __iomem            *control_reg;
-        u32                     enable_mask;
-        unsigned long           last_rounded_rate;
-        u16                     last_rounded_m;
-        u16                     max_multiplier;
-        u8                      last_rounded_n;
-        u8                      min_divider;
-        u16                     max_divider;
-        u8                      modes;
-        void __iomem            *autoidle_reg;
-        void __iomem            *idlest_reg;
-        u32                     autoidle_mask;
-        u32                     freqsel_mask;
-        u32                     idlest_mask;
-        u32                     dco_mask;
-        u32                     sddiv_mask;
-        u8                      auto_recal_bit;
-        u8                      recal_en_bit;
-        u8                      recal_st_bit;
-        u8                      flags;
-};
-#endif
-/*
- * struct clk.flags possibilities
- *
- * XXX document the rest of the clock flags here
- *
- * CLOCK_CLKOUTX2: (OMAP4 only) DPLL CLKOUT and CLKOUTX2 GATE_CTRL
- *     bits share the same register.  This flag allows the
- *     omap4_dpllmx*() code to determine which GATE_CTRL bit field
- *     should be used.  This is a temporary solution - a better approach
- *     would be to associate clock type-specific data with the clock,
- *     similar to the struct dpll_data approach.
- */
-#define ENABLE_REG_32BIT        (1 << 0)        /* Use 32-bit access */
-#define CLOCK_IDLE_CONTROL      (1 << 1)
-#define CLOCK_NO_IDLE_PARENT    (1 << 2)
-#define ENABLE_ON_INIT          (1 << 3)        /* Enable upon framework init */
-#define INVERT_ENABLE           (1 << 4)        /* 0 enables, 1 disables */
-#define CLOCK_CLKOUTX2          (1 << 5)
-/**
- * struct clk - OMAP struct clk
- * @node: list_head connecting this clock into the full clock list
- * @ops: struct clkops * for this clock
- * @name: the name of the clock in the hardware (used in hwmod data and debug)
- * @parent: pointer to this clock's parent struct clk
- * @children: list_head connecting to the child clks' @sibling list_heads
- * @sibling: list_head connecting this clk to its parent clk's @children
- * @rate: current clock rate
- * @enable_reg: register to write to enable the clock (see @enable_bit)
- * @recalc: fn ptr that returns the clock's current rate
- * @set_rate: fn ptr that can change the clock's current rate
- * @round_rate: fn ptr that can round the clock's current rate
- * @init: fn ptr to do clock-specific initialization
- * @enable_bit: bitshift to write to enable/disable the clock (see @enable_reg)
- * @usecount: number of users that have requested this clock to be enabled
- * @fixed_div: when > 0, this clock's rate is its parent's rate / @fixed_div
- * @flags: see "struct clk.flags possibilities" above
- * @clksel_reg: for clksel clks, register va containing src/divisor select
- * @clksel_mask: bitmask in @clksel_reg for the src/divisor selector
- * @clksel: for clksel clks, pointer to struct clksel for this clock
- * @dpll_data: for DPLLs, pointer to struct dpll_data for this clock
- * @clkdm_name: clockdomain name that this clock is contained in
- * @clkdm: pointer to struct clockdomain, resolved from @clkdm_name at runtime
- * @rate_offset: bitshift for rate selection bitfield (OMAP1 only)
- * @src_offset: bitshift for source selection bitfield (OMAP1 only)
- *
- * XXX @rate_offset, @src_offset should probably be removed and OMAP1
- * clock code converted to use clksel.
- *
- * XXX @usecount is poorly named.  It should be "enable_count" or
- * something similar.  "users" in the description refers to kernel
- * code (core code or drivers) that have called clk_enable() and not
- * yet called clk_disable(); the usecount of parent clocks is also
- * incremented by the clock code when clk_enable() is called on child
- * clocks and decremented by the clock code when clk_disable() is
- * called on child clocks.
- *
- * XXX @clkdm, @usecount, @children, @sibling should be marked for
- * internal use only.
- *
- * @children and @sibling are used to optimize parent-to-child clock
- * tree traversals.  (child-to-parent traversals use @parent.)
- *
- * XXX The notion of the clock's current rate probably needs to be
- * separated from the clock's target rate.
- */
-struct clk {
-        struct list_head        node;
-        const struct clkops     *ops;
-        const char              *name;
-        struct clk              *parent;
-        struct list_head        children;
-        struct list_head        sibling;        /* node for children */
-        unsigned long           rate;
-        void __iomem            *enable_reg;
-        unsigned long           (*recalc)(struct clk *);
-        int                     (*set_rate)(struct clk *, unsigned long);
-        long                    (*round_rate)(struct clk *, unsigned long);
-        void                    (*init)(struct clk *);
-        u8                      enable_bit;
-        s8                      usecount;
-        u8                      fixed_div;
-        u8                      flags;
-#ifdef CONFIG_ARCH_OMAP2PLUS
-        void __iomem            *clksel_reg;
-        u32                     clksel_mask;
-        const struct clksel     *clksel;
-        struct dpll_data        *dpll_data;
-        const char              *clkdm_name;
-        struct clockdomain      *clkdm;
-#else
-        u8                      rate_offset;
-        u8                      src_offset;
-#endif
-#if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS)
-        struct dentry           *dent;  /* For visible tree hierarchy */
-#endif
-};
-struct clk_functions {
-        int             (*clk_enable)(struct clk *clk);
-        void            (*clk_disable)(struct clk *clk);
-        long            (*clk_round_rate)(struct clk *clk, unsigned long rate);
-        int             (*clk_set_rate)(struct clk *clk, unsigned long rate);
-        int             (*clk_set_parent)(struct clk *clk, struct clk *parent);
-        void            (*clk_allow_idle)(struct clk *clk);
-        void            (*clk_deny_idle)(struct clk *clk);
-        void            (*clk_disable_unused)(struct clk *clk);
-};
-extern int mpurate;
-extern int clk_init(struct clk_functions *custom_clocks);
-extern void clk_preinit(struct clk *clk);
-extern int clk_register(struct clk *clk);
-extern void clk_reparent(struct clk *child, struct clk *parent);
-extern void clk_unregister(struct clk *clk);
-extern void propagate_rate(struct clk *clk);
-extern void recalculate_root_clocks(void);
-extern unsigned long followparent_recalc(struct clk *clk);
-extern void clk_enable_init_clocks(void);
-unsigned long omap_fixed_divisor_recalc(struct clk *clk);
-extern struct clk *omap_clk_get_by_name(const char *name);
-extern int omap_clk_enable_autoidle_all(void);
-extern int omap_clk_disable_autoidle_all(void);
-extern const struct clkops clkops_null;
-extern struct clk dummy_ck;
-#endif
diff --git a/arch/arm/plat-omap/include/plat/cpu.h b/arch/arm/plat-omap/include/plat/cpu.h
index 67da857783ce..ba542ec8d513 100644
--- a/arch/arm/plat-omap/include/plat/cpu.h
+++ b/arch/arm/plat-omap/include/plat/cpu.h
@@ -1,6 +1,4 @@
 /*
- * arch/arm/plat-omap/include/mach/cpu.h
- *
 * OMAP cpu type detection
 *
 * Copyright (C) 2004, 2008 Nokia Corporation
@@ -30,470 +28,12 @@
 #ifndef __ASM_ARCH_OMAP_CPU_H
 #define __ASM_ARCH_OMAP_CPU_H
-#ifndef __ASSEMBLY__
+#ifdef CONFIG_ARCH_OMAP1
+#include "../../mach-omap1/soc.h"
-#include <linux/bitops.h>
-#include <plat/multi.h>
-/*
- * Omap device type i.e. EMU/HS/TST/GP/BAD
- */
-#define OMAP2_DEVICE_TYPE_TEST          0
-#define OMAP2_DEVICE_TYPE_EMU           1
-#define OMAP2_DEVICE_TYPE_SEC           2
-#define OMAP2_DEVICE_TYPE_GP            3
-#define OMAP2_DEVICE_TYPE_BAD           4
-int omap_type(void);
-/*
- * omap_rev bits:
- * CPU id bits  (0730, 1510, 1710, 2422...)     [31:16]
- * CPU revision (See _REV_ defined in cpu.h)    [15:08]
- * CPU class bits (15xx, 16xx, 24xx, 34xx...)   [07:00]
- */
-unsigned int omap_rev(void);
-/*
- * Get the CPU revision for OMAP devices
- */
-#define GET_OMAP_REVISION()     ((omap_rev() >> 8) & 0xff)
-/*
- * Macros to group OMAP into cpu classes.
- * These can be used in most places.
- * cpu_is_omap7xx():    True for OMAP730, OMAP850
- * cpu_is_omap15xx():   True for OMAP1510, OMAP5910 and OMAP310
- * cpu_is_omap16xx():   True for OMAP1610, OMAP5912 and OMAP1710
- * cpu_is_omap24xx():   True for OMAP2420, OMAP2422, OMAP2423, OMAP2430
- * cpu_is_omap242x():   True for OMAP2420, OMAP2422, OMAP2423
- * cpu_is_omap243x():   True for OMAP2430
- * cpu_is_omap343x():   True for OMAP3430
- * cpu_is_omap443x():   True for OMAP4430
- * cpu_is_omap446x():   True for OMAP4460
- * cpu_is_omap447x():   True for OMAP4470
- * soc_is_omap543x():   True for OMAP5430, OMAP5432
- */
-#define GET_OMAP_CLASS  (omap_rev() & 0xff)
-#define IS_OMAP_CLASS(class, id)                        \
-static inline int is_omap ##class (void)                \
-{                                                       \
-        return (GET_OMAP_CLASS == (id)) ? 1 : 0;        \
-}
-#define GET_AM_CLASS    ((omap_rev() >> 24) & 0xff)
-#define IS_AM_CLASS(class, id)                          \
-static inline int is_am ##class (void)                  \
-{                                                       \
-        return (GET_AM_CLASS == (id)) ? 1 : 0;          \
-}
-#define GET_TI_CLASS    ((omap_rev() >> 24) & 0xff)
-#define IS_TI_CLASS(class, id)                  \
-static inline int is_ti ##class (void)          \
-{                                                       \
-        return (GET_TI_CLASS == (id)) ? 1 : 0;  \
-}
-#define GET_OMAP_SUBCLASS       ((omap_rev() >> 20) & 0x0fff)
-#define IS_OMAP_SUBCLASS(subclass, id)                  \
-static inline int is_omap ##subclass (void)             \
-{                                                       \
-        return (GET_OMAP_SUBCLASS == (id)) ? 1 : 0;     \
-}
-#define IS_TI_SUBCLASS(subclass, id)                    \
-static inline int is_ti ##subclass (void)               \
-{                                                       \
-        return (GET_OMAP_SUBCLASS == (id)) ? 1 : 0;     \
-}
-#define IS_AM_SUBCLASS(subclass, id)                    \
-static inline int is_am ##subclass (void)               \
-{                                                       \
-        return (GET_OMAP_SUBCLASS == (id)) ? 1 : 0;     \
-}
-IS_OMAP_CLASS(7xx, 0x07)
-IS_OMAP_CLASS(15xx, 0x15)
-IS_OMAP_CLASS(16xx, 0x16)
-IS_OMAP_CLASS(24xx, 0x24)
-IS_OMAP_CLASS(34xx, 0x34)
-IS_OMAP_CLASS(44xx, 0x44)
-IS_AM_CLASS(35xx, 0x35)
-IS_OMAP_CLASS(54xx, 0x54)
-IS_AM_CLASS(33xx, 0x33)
-IS_TI_CLASS(81xx, 0x81)
-IS_OMAP_SUBCLASS(242x, 0x242)
-IS_OMAP_SUBCLASS(243x, 0x243)
-IS_OMAP_SUBCLASS(343x, 0x343)
-IS_OMAP_SUBCLASS(363x, 0x363)
-IS_OMAP_SUBCLASS(443x, 0x443)
-IS_OMAP_SUBCLASS(446x, 0x446)
-IS_OMAP_SUBCLASS(447x, 0x447)
-IS_OMAP_SUBCLASS(543x, 0x543)
-IS_TI_SUBCLASS(816x, 0x816)
-IS_TI_SUBCLASS(814x, 0x814)
-IS_AM_SUBCLASS(335x, 0x335)
-#define cpu_is_omap7xx()                0
-#define cpu_is_omap15xx()               0
-#define cpu_is_omap16xx()               0
-#define cpu_is_omap24xx()               0
-#define cpu_is_omap242x()               0
-#define cpu_is_omap243x()               0
-#define cpu_is_omap34xx()               0
-#define cpu_is_omap343x()               0
-#define cpu_is_ti81xx()                 0
-#define cpu_is_ti816x()                 0
-#define cpu_is_ti814x()                 0
-#define soc_is_am35xx()                 0
-#define soc_is_am33xx()                 0
-#define soc_is_am335x()                 0
-#define cpu_is_omap44xx()               0
-#define cpu_is_omap443x()               0
-#define cpu_is_omap446x()               0
-#define cpu_is_omap447x()               0
-#define soc_is_omap54xx()               0
-#define soc_is_omap543x()               0
-#if defined(MULTI_OMAP1)
-# if defined(CONFIG_ARCH_OMAP730)
-#  undef  cpu_is_omap7xx
-#  define cpu_is_omap7xx()              is_omap7xx()
-# endif
-# if defined(CONFIG_ARCH_OMAP850)
-#  undef  cpu_is_omap7xx
-#  define cpu_is_omap7xx()              is_omap7xx()
-# endif
-# if defined(CONFIG_ARCH_OMAP15XX)
-#  undef  cpu_is_omap15xx
-#  define cpu_is_omap15xx()             is_omap15xx()
-# endif
-# if defined(CONFIG_ARCH_OMAP16XX)
-#  undef  cpu_is_omap16xx
-#  define cpu_is_omap16xx()             is_omap16xx()
-# endif
-#else
-# if defined(CONFIG_ARCH_OMAP730)
-#  undef  cpu_is_omap7xx
-#  define cpu_is_omap7xx()              1
-# endif
-# if defined(CONFIG_ARCH_OMAP850)
-#  undef  cpu_is_omap7xx
-#  define cpu_is_omap7xx()              1
-# endif
-# if defined(CONFIG_ARCH_OMAP15XX)
-#  undef  cpu_is_omap15xx
-#  define cpu_is_omap15xx()             1
-# endif
-# if defined(CONFIG_ARCH_OMAP16XX)
-#  undef  cpu_is_omap16xx
-#  define cpu_is_omap16xx()             1
-# endif
-#endif
-#if defined(MULTI_OMAP2)
-# if defined(CONFIG_ARCH_OMAP2)
-#  undef  cpu_is_omap24xx
-#  define cpu_is_omap24xx()             is_omap24xx()
-# endif
-# if defined (CONFIG_SOC_OMAP2420)
-#  undef  cpu_is_omap242x
-#  define cpu_is_omap242x()             is_omap242x()
-# endif
-# if defined (CONFIG_SOC_OMAP2430)
-#  undef  cpu_is_omap243x
-#  define cpu_is_omap243x()             is_omap243x()
-# endif
-# if defined(CONFIG_ARCH_OMAP3)
-#  undef  cpu_is_omap34xx
-#  undef  cpu_is_omap343x
-#  define cpu_is_omap34xx()             is_omap34xx()
-#  define cpu_is_omap343x()             is_omap343x()
-# endif
-#else
-# if defined(CONFIG_ARCH_OMAP2)
-#  undef  cpu_is_omap24xx
-#  define cpu_is_omap24xx()             1
-# endif
-# if defined(CONFIG_SOC_OMAP2420)
-#  undef  cpu_is_omap242x
-#  define cpu_is_omap242x()             1
-# endif
-# if defined(CONFIG_SOC_OMAP2430)
-#  undef  cpu_is_omap243x
-#  define cpu_is_omap243x()             1
-# endif
-# if defined(CONFIG_ARCH_OMAP3)
-#  undef  cpu_is_omap34xx
-#  define cpu_is_omap34xx()             1
-# endif
-# if defined(CONFIG_SOC_OMAP3430)
-#  undef  cpu_is_omap343x
-#  define cpu_is_omap343x()             1
-# endif
-#endif
-/*
- * Macros to detect individual cpu types.
- * These are only rarely needed.
- * cpu_is_omap310():    True for OMAP310
- * cpu_is_omap1510():   True for OMAP1510
- * cpu_is_omap1610():   True for OMAP1610
- * cpu_is_omap1611():   True for OMAP1611
- * cpu_is_omap5912():   True for OMAP5912
- * cpu_is_omap1621():   True for OMAP1621
- * cpu_is_omap1710():   True for OMAP1710
- * cpu_is_omap2420():   True for OMAP2420
- * cpu_is_omap2422():   True for OMAP2422
- * cpu_is_omap2423():   True for OMAP2423
- * cpu_is_omap2430():   True for OMAP2430
- * cpu_is_omap3430():   True for OMAP3430
- */
-#define GET_OMAP_TYPE   ((omap_rev() >> 16) & 0xffff)
-#define IS_OMAP_TYPE(type, id)                          \
-static inline int is_omap ##type (void)                 \
-{                                                       \
-        return (GET_OMAP_TYPE == (id)) ? 1 : 0;         \
-}
-IS_OMAP_TYPE(310, 0x0310)
-IS_OMAP_TYPE(1510, 0x1510)
-IS_OMAP_TYPE(1610, 0x1610)
-IS_OMAP_TYPE(1611, 0x1611)
-IS_OMAP_TYPE(5912, 0x1611)
-IS_OMAP_TYPE(1621, 0x1621)
-IS_OMAP_TYPE(1710, 0x1710)
-IS_OMAP_TYPE(2420, 0x2420)
-IS_OMAP_TYPE(2422, 0x2422)
-IS_OMAP_TYPE(2423, 0x2423)
-IS_OMAP_TYPE(2430, 0x2430)
-IS_OMAP_TYPE(3430, 0x3430)
-#define cpu_is_omap310()                0
-#define cpu_is_omap1510()               0
-#define cpu_is_omap1610()               0
-#define cpu_is_omap5912()               0
-#define cpu_is_omap1611()               0
-#define cpu_is_omap1621()               0
-#define cpu_is_omap1710()               0
-#define cpu_is_omap2420()               0
-#define cpu_is_omap2422()               0
-#define cpu_is_omap2423()               0
-#define cpu_is_omap2430()               0
-#define cpu_is_omap3430()               0
-#define cpu_is_omap3630()               0
-#define soc_is_omap5430()               0
-/*
- * Whether we have MULTI_OMAP1 or not, we still need to distinguish
- * between 310 vs. 1510 and 1611B/5912 vs. 1710.
- */
-#if defined(CONFIG_ARCH_OMAP15XX)
-# undef  cpu_is_omap310
-# undef  cpu_is_omap1510
-# define cpu_is_omap310()               is_omap310()
-# define cpu_is_omap1510()              is_omap1510()
-#endif
-#if defined(CONFIG_ARCH_OMAP16XX)
-# undef  cpu_is_omap1610
-# undef  cpu_is_omap1611
-# undef  cpu_is_omap5912
-# undef  cpu_is_omap1621
-# undef  cpu_is_omap1710
-# define cpu_is_omap1610()              is_omap1610()
-# define cpu_is_omap1611()              is_omap1611()
-# define cpu_is_omap5912()              is_omap5912()
-# define cpu_is_omap1621()              is_omap1621()
-# define cpu_is_omap1710()              is_omap1710()
-#endif
-#if defined(CONFIG_ARCH_OMAP2)
-# undef  cpu_is_omap2420
-# undef  cpu_is_omap2422
-# undef  cpu_is_omap2423
-# undef  cpu_is_omap2430
-# define cpu_is_omap2420()              is_omap2420()
-# define cpu_is_omap2422()              is_omap2422()
-# define cpu_is_omap2423()              is_omap2423()
-# define cpu_is_omap2430()              is_omap2430()
-#endif
-#if defined(CONFIG_ARCH_OMAP3)
-# undef cpu_is_omap3430
-# undef cpu_is_ti81xx
-# undef cpu_is_ti816x
-# undef cpu_is_ti814x
-# undef soc_is_am35xx
-# define cpu_is_omap3430()              is_omap3430()
-# undef cpu_is_omap3630
-# define cpu_is_omap3630()              is_omap363x()
-# define cpu_is_ti81xx()                is_ti81xx()
-# define cpu_is_ti816x()                is_ti816x()
-# define cpu_is_ti814x()                is_ti814x()
-# define soc_is_am35xx()                is_am35xx()
 #endif
-# if defined(CONFIG_SOC_AM33XX)
+#ifdef CONFIG_ARCH_OMAP2PLUS
-# undef soc_is_am33xx
+#include "../../mach-omap2/soc.h"
-# undef soc_is_am335x
-# define soc_is_am33xx()                is_am33xx()
-# define soc_is_am335x()                is_am335x()
 #endif
-# if defined(CONFIG_ARCH_OMAP4)
-# undef cpu_is_omap44xx
-# undef cpu_is_omap443x
-# undef cpu_is_omap446x
-# undef cpu_is_omap447x
-# define cpu_is_omap44xx()              is_omap44xx()
-# define cpu_is_omap443x()              is_omap443x()
-# define cpu_is_omap446x()              is_omap446x()
-# define cpu_is_omap447x()              is_omap447x()
-# endif
-# if defined(CONFIG_SOC_OMAP5)
-# undef soc_is_omap54xx
-# undef soc_is_omap543x
-# define soc_is_omap54xx()              is_omap54xx()
-# define soc_is_omap543x()              is_omap543x()
-#endif
-/* Macros to detect if we have OMAP1 or OMAP2 */
-#define cpu_class_is_omap1()    (cpu_is_omap7xx() || cpu_is_omap15xx() || \
-                                cpu_is_omap16xx())
-#define cpu_class_is_omap2()    (cpu_is_omap24xx() || cpu_is_omap34xx() || \
-                                cpu_is_omap44xx() || soc_is_omap54xx() || \
-                                soc_is_am33xx())
-/* Various silicon revisions for omap2 */
-#define OMAP242X_CLASS          0x24200024
-#define OMAP2420_REV_ES1_0      OMAP242X_CLASS
-#define OMAP2420_REV_ES2_0      (OMAP242X_CLASS | (0x1 << 8))
-#define OMAP243X_CLASS          0x24300024
-#define OMAP2430_REV_ES1_0      OMAP243X_CLASS
-#define OMAP343X_CLASS          0x34300034
-#define OMAP3430_REV_ES1_0      OMAP343X_CLASS
-#define OMAP3430_REV_ES2_0      (OMAP343X_CLASS | (0x1 << 8))
-#define OMAP3430_REV_ES2_1      (OMAP343X_CLASS | (0x2 << 8))
-#define OMAP3430_REV_ES3_0      (OMAP343X_CLASS | (0x3 << 8))
-#define OMAP3430_REV_ES3_1      (OMAP343X_CLASS | (0x4 << 8))
-#define OMAP3430_REV_ES3_1_2    (OMAP343X_CLASS | (0x5 << 8))
-#define OMAP363X_CLASS          0x36300034
-#define OMAP3630_REV_ES1_0      OMAP363X_CLASS
-#define OMAP3630_REV_ES1_1      (OMAP363X_CLASS | (0x1 << 8))
-#define OMAP3630_REV_ES1_2      (OMAP363X_CLASS | (0x2 << 8))
-#define TI816X_CLASS            0x81600034
-#define TI8168_REV_ES1_0        TI816X_CLASS
-#define TI8168_REV_ES1_1        (TI816X_CLASS | (0x1 << 8))
-#define TI814X_CLASS            0x81400034
-#define TI8148_REV_ES1_0        TI814X_CLASS
-#define TI8148_REV_ES2_0        (TI814X_CLASS | (0x1 << 8))
-#define TI8148_REV_ES2_1        (TI814X_CLASS | (0x2 << 8))
-#define AM35XX_CLASS            0x35170034
-#define AM35XX_REV_ES1_0        AM35XX_CLASS
-#define AM35XX_REV_ES1_1        (AM35XX_CLASS | (0x1 << 8))
-#define AM335X_CLASS            0x33500033
-#define AM335X_REV_ES1_0        AM335X_CLASS
-#define OMAP443X_CLASS          0x44300044
-#define OMAP4430_REV_ES1_0      (OMAP443X_CLASS | (0x10 << 8))
-#define OMAP4430_REV_ES2_0      (OMAP443X_CLASS | (0x20 << 8))
-#define OMAP4430_REV_ES2_1      (OMAP443X_CLASS | (0x21 << 8))
-#define OMAP4430_REV_ES2_2      (OMAP443X_CLASS | (0x22 << 8))
-#define OMAP4430_REV_ES2_3      (OMAP443X_CLASS | (0x23 << 8))
-#define OMAP446X_CLASS          0x44600044
-#define OMAP4460_REV_ES1_0      (OMAP446X_CLASS | (0x10 << 8))
-#define OMAP4460_REV_ES1_1      (OMAP446X_CLASS | (0x11 << 8))
-#define OMAP447X_CLASS          0x44700044
-#define OMAP4470_REV_ES1_0      (OMAP447X_CLASS | (0x10 << 8))
-#define OMAP54XX_CLASS          0x54000054
-#define OMAP5430_REV_ES1_0      (OMAP54XX_CLASS | (0x30 << 16) | (0x10 << 8))
-#define OMAP5432_REV_ES1_0      (OMAP54XX_CLASS | (0x32 << 16) | (0x10 << 8))
-void omap2xxx_check_revision(void);
-void omap3xxx_check_revision(void);
-void omap4xxx_check_revision(void);
-void omap5xxx_check_revision(void);
-void omap3xxx_check_features(void);
-void ti81xx_check_features(void);
-void omap4xxx_check_features(void);
-/*
- * Runtime detection of OMAP3 features
- *
- * OMAP3_HAS_IO_CHAIN_CTRL: Some later members of the OMAP3 chip
- *    family have OS-level control over the I/O chain clock.  This is
- *    to avoid a window during which wakeups could potentially be lost
- *    during powerdomain transitions.  If this bit is set, it
- *    indicates that the chip does support OS-level control of this
- *    feature.
- */
-extern u32 omap_features;
-#define OMAP3_HAS_L2CACHE               BIT(0)
-#define OMAP3_HAS_IVA                   BIT(1)
-#define OMAP3_HAS_SGX                   BIT(2)
-#define OMAP3_HAS_NEON                  BIT(3)
-#define OMAP3_HAS_ISP                   BIT(4)
-#define OMAP3_HAS_192MHZ_CLK            BIT(5)
-#define OMAP3_HAS_IO_WAKEUP             BIT(6)
-#define OMAP3_HAS_SDRC                  BIT(7)
-#define OMAP3_HAS_IO_CHAIN_CTRL         BIT(8)
-#define OMAP4_HAS_MPU_1GHZ              BIT(9)
-#define OMAP4_HAS_MPU_1_2GHZ            BIT(10)
-#define OMAP4_HAS_MPU_1_5GHZ            BIT(11)
-#define OMAP3_HAS_FEATURE(feat,flag)                    \
-static inline unsigned int omap3_has_ ##feat(void)      \
-{                                                       \
-        return omap_features & OMAP3_HAS_ ##flag;       \
-}                                                       \
-OMAP3_HAS_FEATURE(l2cache, L2CACHE)
-OMAP3_HAS_FEATURE(sgx, SGX)
-OMAP3_HAS_FEATURE(iva, IVA)
-OMAP3_HAS_FEATURE(neon, NEON)
-OMAP3_HAS_FEATURE(isp, ISP)
-OMAP3_HAS_FEATURE(192mhz_clk, 192MHZ_CLK)
-OMAP3_HAS_FEATURE(io_wakeup, IO_WAKEUP)
-OMAP3_HAS_FEATURE(sdrc, SDRC)
-OMAP3_HAS_FEATURE(io_chain_ctrl, IO_CHAIN_CTRL)
-/*
- * Runtime detection of OMAP4 features
- */
-#define OMAP4_HAS_FEATURE(feat, flag)                   \
-static inline unsigned int omap4_has_ ##feat(void)      \
-{                                                       \
-        return omap_features & OMAP4_HAS_ ##flag;       \
-}                                                       \
-OMAP4_HAS_FEATURE(mpu_1ghz, MPU_1GHZ)
-OMAP4_HAS_FEATURE(mpu_1_2ghz, MPU_1_2GHZ)
-OMAP4_HAS_FEATURE(mpu_1_5ghz, MPU_1_5GHZ)
-#endif  /* __ASSEMBLY__ */
 #endif
diff --git a/arch/arm/plat-omap/include/plat/dma-44xx.h b/arch/arm/plat-omap/include/plat/dma-44xx.h
deleted file mode 100644
index 1f767cb2f38a..000000000000
--- a/arch/arm/plat-omap/include/plat/dma-44xx.h
+++ /dev/null
@@ -1,147 +0,0 @@
-/*
- * OMAP4 SDMA channel definitions
- *
- * Copyright (C) 2009-2010 Texas Instruments, Inc.
- * Copyright (C) 2009-2010 Nokia Corporation
- *
- * Santosh Shilimkar (santosh.shilimkar@ti.com)
- * Benoit Cousson (b-cousson@ti.com)
- * Paul Walmsley (paul@pwsan.com)
- *
- * This file is automatically generated from the OMAP hardware databases.
- * We respectfully ask that any modifications to this file be coordinated
- * with the public linux-omap@vger.kernel.org mailing list and the
- * authors above to ensure that the autogeneration scripts are kept
- * up-to-date with the file contents.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ARCH_ARM_MACH_OMAP2_OMAP44XX_DMA_H
-#define __ARCH_ARM_MACH_OMAP2_OMAP44XX_DMA_H
-#define OMAP44XX_DMA_SYS_REQ0                   2
-#define OMAP44XX_DMA_SYS_REQ1                   3
-#define OMAP44XX_DMA_GPMC                       4
-#define OMAP44XX_DMA_DSS_DISPC_REQ              6
-#define OMAP44XX_DMA_SYS_REQ2                   7
-#define OMAP44XX_DMA_MCASP1_AXEVT               8
-#define OMAP44XX_DMA_ISS_REQ1                   9
-#define OMAP44XX_DMA_ISS_REQ2                   10
-#define OMAP44XX_DMA_MCASP1_AREVT               11
-#define OMAP44XX_DMA_ISS_REQ3                   12
-#define OMAP44XX_DMA_ISS_REQ4                   13
-#define OMAP44XX_DMA_DSS_RFBI_REQ               14
-#define OMAP44XX_DMA_SPI3_TX0                   15
-#define OMAP44XX_DMA_SPI3_RX0                   16
-#define OMAP44XX_DMA_MCBSP2_TX                  17
-#define OMAP44XX_DMA_MCBSP2_RX                  18
-#define OMAP44XX_DMA_MCBSP3_TX                  19
-#define OMAP44XX_DMA_MCBSP3_RX                  20
-#define OMAP44XX_DMA_C2C_SSCM_GPO0              21
-#define OMAP44XX_DMA_C2C_SSCM_GPO1              22
-#define OMAP44XX_DMA_SPI3_TX1                   23
-#define OMAP44XX_DMA_SPI3_RX1                   24
-#define OMAP44XX_DMA_I2C3_TX                    25
-#define OMAP44XX_DMA_I2C3_RX                    26
-#define OMAP44XX_DMA_I2C1_TX                    27
-#define OMAP44XX_DMA_I2C1_RX                    28
-#define OMAP44XX_DMA_I2C2_TX                    29
-#define OMAP44XX_DMA_I2C2_RX                    30
-#define OMAP44XX_DMA_MCBSP4_TX                  31
-#define OMAP44XX_DMA_MCBSP4_RX                  32
-#define OMAP44XX_DMA_MCBSP1_TX                  33
-#define OMAP44XX_DMA_MCBSP1_RX                  34
-#define OMAP44XX_DMA_SPI1_TX0                   35
-#define OMAP44XX_DMA_SPI1_RX0                   36
-#define OMAP44XX_DMA_SPI1_TX1                   37
-#define OMAP44XX_DMA_SPI1_RX1                   38
-#define OMAP44XX_DMA_SPI1_TX2                   39
-#define OMAP44XX_DMA_SPI1_RX2                   40
-#define OMAP44XX_DMA_SPI1_TX3                   41
-#define OMAP44XX_DMA_SPI1_RX3                   42
-#define OMAP44XX_DMA_SPI2_TX0                   43
-#define OMAP44XX_DMA_SPI2_RX0                   44
-#define OMAP44XX_DMA_SPI2_TX1                   45
-#define OMAP44XX_DMA_SPI2_RX1                   46
-#define OMAP44XX_DMA_MMC2_TX                    47
-#define OMAP44XX_DMA_MMC2_RX                    48
-#define OMAP44XX_DMA_UART1_TX                   49
-#define OMAP44XX_DMA_UART1_RX                   50
-#define OMAP44XX_DMA_UART2_TX                   51
-#define OMAP44XX_DMA_UART2_RX                   52
-#define OMAP44XX_DMA_UART3_TX                   53
-#define OMAP44XX_DMA_UART3_RX                   54
-#define OMAP44XX_DMA_UART4_TX                   55
-#define OMAP44XX_DMA_UART4_RX                   56
-#define OMAP44XX_DMA_MMC4_TX                    57
-#define OMAP44XX_DMA_MMC4_RX                    58
-#define OMAP44XX_DMA_MMC5_TX                    59
-#define OMAP44XX_DMA_MMC5_RX                    60
-#define OMAP44XX_DMA_MMC1_TX                    61
-#define OMAP44XX_DMA_MMC1_RX                    62
-#define OMAP44XX_DMA_SYS_REQ3                   64
-#define OMAP44XX_DMA_MCPDM_UP                   65
-#define OMAP44XX_DMA_MCPDM_DL                   66
-#define OMAP44XX_DMA_DMIC_REQ                   67
-#define OMAP44XX_DMA_C2C_SSCM_GPO2              68
-#define OMAP44XX_DMA_C2C_SSCM_GPO3              69
-#define OMAP44XX_DMA_SPI4_TX0                   70
-#define OMAP44XX_DMA_SPI4_RX0                   71
-#define OMAP44XX_DMA_DSS_DSI1_REQ0              72
-#define OMAP44XX_DMA_DSS_DSI1_REQ1              73
-#define OMAP44XX_DMA_DSS_DSI1_REQ2              74
-#define OMAP44XX_DMA_DSS_DSI1_REQ3              75
-#define OMAP44XX_DMA_DSS_HDMI_REQ               76
-#define OMAP44XX_DMA_MMC3_TX                    77
-#define OMAP44XX_DMA_MMC3_RX                    78
-#define OMAP44XX_DMA_USIM_TX                    79
-#define OMAP44XX_DMA_USIM_RX                    80
-#define OMAP44XX_DMA_DSS_DSI2_REQ0              81
-#define OMAP44XX_DMA_DSS_DSI2_REQ1              82
-#define OMAP44XX_DMA_DSS_DSI2_REQ2              83
-#define OMAP44XX_DMA_DSS_DSI2_REQ3              84
-#define OMAP44XX_DMA_SLIMBUS1_TX0               85
-#define OMAP44XX_DMA_SLIMBUS1_TX1               86
-#define OMAP44XX_DMA_SLIMBUS1_TX2               87
-#define OMAP44XX_DMA_SLIMBUS1_TX3               88
-#define OMAP44XX_DMA_SLIMBUS1_RX0               89
-#define OMAP44XX_DMA_SLIMBUS1_RX1               90
-#define OMAP44XX_DMA_SLIMBUS1_RX2               91
-#define OMAP44XX_DMA_SLIMBUS1_RX3               92
-#define OMAP44XX_DMA_SLIMBUS2_TX0               93
-#define OMAP44XX_DMA_SLIMBUS2_TX1               94
-#define OMAP44XX_DMA_SLIMBUS2_TX2               95
-#define OMAP44XX_DMA_SLIMBUS2_TX3               96
-#define OMAP44XX_DMA_SLIMBUS2_RX0               97
-#define OMAP44XX_DMA_SLIMBUS2_RX1               98
-#define OMAP44XX_DMA_SLIMBUS2_RX2               99
-#define OMAP44XX_DMA_SLIMBUS2_RX3               100
-#define OMAP44XX_DMA_ABE_REQ_0                  101
-#define OMAP44XX_DMA_ABE_REQ_1                  102
-#define OMAP44XX_DMA_ABE_REQ_2                  103
-#define OMAP44XX_DMA_ABE_REQ_3                  104
-#define OMAP44XX_DMA_ABE_REQ_4                  105
-#define OMAP44XX_DMA_ABE_REQ_5                  106
-#define OMAP44XX_DMA_ABE_REQ_6                  107
-#define OMAP44XX_DMA_ABE_REQ_7                  108
-#define OMAP44XX_DMA_AES1_P_CTX_IN_REQ          109
-#define OMAP44XX_DMA_AES1_P_DATA_IN_REQ         110
-#define OMAP44XX_DMA_AES1_P_DATA_OUT_REQ        111
-#define OMAP44XX_DMA_AES2_P_CTX_IN_REQ          112
-#define OMAP44XX_DMA_AES2_P_DATA_IN_REQ         113
-#define OMAP44XX_DMA_AES2_P_DATA_OUT_REQ        114
-#define OMAP44XX_DMA_DES_P_CTX_IN_REQ           115
-#define OMAP44XX_DMA_DES_P_DATA_IN_REQ          116
-#define OMAP44XX_DMA_DES_P_DATA_OUT_REQ         117
-#define OMAP44XX_DMA_SHA2_CTXIN_P               118
-#define OMAP44XX_DMA_SHA2_DIN_P                 119
-#define OMAP44XX_DMA_SHA2_CTXOUT_P              120
-#define OMAP44XX_DMA_AES1_P_CONTEXT_OUT_REQ     121
-#define OMAP44XX_DMA_AES2_P_CONTEXT_OUT_REQ     122
-#define OMAP44XX_DMA_I2C4_TX                    124
-#define OMAP44XX_DMA_I2C4_RX                    125
-#endif
diff --git a/arch/arm/plat-omap/include/plat/fpga.h b/arch/arm/plat-omap/include/plat/fpga.h
deleted file mode 100644
index bd3c6324ae1f..000000000000
--- a/arch/arm/plat-omap/include/plat/fpga.h
+++ /dev/null
@@ -1,193 +0,0 @@
-/*
- * arch/arm/plat-omap/include/mach/fpga.h
- *
- * Interrupt handler for OMAP-1510 FPGA
- *
- * Copyright (C) 2001 RidgeRun, Inc.
- * Author: Greg Lonnon <glonnon@ridgerun.com>
- *
- * Copyright (C) 2002 MontaVista Software, Inc.
- *
- * Separated FPGA interrupts from innovator1510.c and cleaned up for 2.6
- * Copyright (C) 2004 Nokia Corporation by Tony Lindrgen <tony@atomide.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ASM_ARCH_OMAP_FPGA_H
-#define __ASM_ARCH_OMAP_FPGA_H
-extern void omap1510_fpga_init_irq(void);
-#define fpga_read(reg)                  __raw_readb(reg)
-#define fpga_write(val, reg)            __raw_writeb(val, reg)
-/*
- * ---------------------------------------------------------------------------
- *  H2/P2 Debug board FPGA
- * ---------------------------------------------------------------------------
- */
-/* maps in the FPGA registers and the ETHR registers */
-#define H2P2_DBG_FPGA_BASE              0xE8000000              /* VA */
-#define H2P2_DBG_FPGA_SIZE              SZ_4K                   /* SIZE */
-#define H2P2_DBG_FPGA_START             0x04000000              /* PA */
-#define H2P2_DBG_FPGA_ETHR_START        (H2P2_DBG_FPGA_START + 0x300)
-#define H2P2_DBG_FPGA_FPGA_REV          IOMEM(H2P2_DBG_FPGA_BASE + 0x10)        /* FPGA Revision */
-#define H2P2_DBG_FPGA_BOARD_REV         IOMEM(H2P2_DBG_FPGA_BASE + 0x12)        /* Board Revision */
-#define H2P2_DBG_FPGA_GPIO              IOMEM(H2P2_DBG_FPGA_BASE + 0x14)        /* GPIO outputs */
-#define H2P2_DBG_FPGA_LEDS              IOMEM(H2P2_DBG_FPGA_BASE + 0x16)        /* LEDs outputs */
-#define H2P2_DBG_FPGA_MISC_INPUTS       IOMEM(H2P2_DBG_FPGA_BASE + 0x18)        /* Misc inputs */
-#define H2P2_DBG_FPGA_LAN_STATUS        IOMEM(H2P2_DBG_FPGA_BASE + 0x1A)        /* LAN Status line */
-#define H2P2_DBG_FPGA_LAN_RESET         IOMEM(H2P2_DBG_FPGA_BASE + 0x1C)        /* LAN Reset line */
-/* NOTE:  most boards don't have a static mapping for the FPGA ... */
-struct h2p2_dbg_fpga {
-        /* offset 0x00 */
-        u16             smc91x[8];
-        /* offset 0x10 */
-        u16             fpga_rev;
-        u16             board_rev;
-        u16             gpio_outputs;
-        u16             leds;
-        /* offset 0x18 */
-        u16             misc_inputs;
-        u16             lan_status;
-        u16             lan_reset;
-        u16             reserved0;
-        /* offset 0x20 */
-        u16             ps2_data;
-        u16             ps2_ctrl;
-        /* plus also 4 rs232 ports ... */
-};
-/* LEDs definition on debug board (16 LEDs, all physically green) */
-#define H2P2_DBG_FPGA_LED_GREEN         (1 << 15)
-#define H2P2_DBG_FPGA_LED_AMBER         (1 << 14)
-#define H2P2_DBG_FPGA_LED_RED           (1 << 13)
-#define H2P2_DBG_FPGA_LED_BLUE          (1 << 12)
-/*  cpu0 load-meter LEDs */
-#define H2P2_DBG_FPGA_LOAD_METER        (1 << 0)        // A bit of fun on our board ...
-#define H2P2_DBG_FPGA_LOAD_METER_SIZE   11
-#define H2P2_DBG_FPGA_LOAD_METER_MASK   ((1 << H2P2_DBG_FPGA_LOAD_METER_SIZE) - 1)
-#define H2P2_DBG_FPGA_P2_LED_TIMER              (1 << 0)
-#define H2P2_DBG_FPGA_P2_LED_IDLE               (1 << 1)
-/*
- * ---------------------------------------------------------------------------
- *  OMAP-1510 FPGA
- * ---------------------------------------------------------------------------
- */
-#define OMAP1510_FPGA_BASE              0xE8000000              /* VA */
-#define OMAP1510_FPGA_SIZE              SZ_4K
-#define OMAP1510_FPGA_START             0x08000000              /* PA */
-/* Revision */
-#define OMAP1510_FPGA_REV_LOW                   IOMEM(OMAP1510_FPGA_BASE + 0x0)
-#define OMAP1510_FPGA_REV_HIGH                  IOMEM(OMAP1510_FPGA_BASE + 0x1)
-#define OMAP1510_FPGA_LCD_PANEL_CONTROL         IOMEM(OMAP1510_FPGA_BASE + 0x2)
-#define OMAP1510_FPGA_LED_DIGIT                 IOMEM(OMAP1510_FPGA_BASE + 0x3)
-#define INNOVATOR_FPGA_HID_SPI                  IOMEM(OMAP1510_FPGA_BASE + 0x4)
-#define OMAP1510_FPGA_POWER                     IOMEM(OMAP1510_FPGA_BASE + 0x5)
-/* Interrupt status */
-#define OMAP1510_FPGA_ISR_LO                    IOMEM(OMAP1510_FPGA_BASE + 0x6)
-#define OMAP1510_FPGA_ISR_HI                    IOMEM(OMAP1510_FPGA_BASE + 0x7)
-/* Interrupt mask */
-#define OMAP1510_FPGA_IMR_LO                    IOMEM(OMAP1510_FPGA_BASE + 0x8)
-#define OMAP1510_FPGA_IMR_HI                    IOMEM(OMAP1510_FPGA_BASE + 0x9)
-/* Reset registers */
-#define OMAP1510_FPGA_HOST_RESET                IOMEM(OMAP1510_FPGA_BASE + 0xa)
-#define OMAP1510_FPGA_RST                       IOMEM(OMAP1510_FPGA_BASE + 0xb)
-#define OMAP1510_FPGA_AUDIO                     IOMEM(OMAP1510_FPGA_BASE + 0xc)
-#define OMAP1510_FPGA_DIP                       IOMEM(OMAP1510_FPGA_BASE + 0xe)
-#define OMAP1510_FPGA_FPGA_IO                   IOMEM(OMAP1510_FPGA_BASE + 0xf)
-#define OMAP1510_FPGA_UART1                     IOMEM(OMAP1510_FPGA_BASE + 0x14)
-#define OMAP1510_FPGA_UART2                     IOMEM(OMAP1510_FPGA_BASE + 0x15)
-#define OMAP1510_FPGA_OMAP1510_STATUS           IOMEM(OMAP1510_FPGA_BASE + 0x16)
-#define OMAP1510_FPGA_BOARD_REV                 IOMEM(OMAP1510_FPGA_BASE + 0x18)
-#define OMAP1510P1_PPT_DATA                     IOMEM(OMAP1510_FPGA_BASE + 0x100)
-#define OMAP1510P1_PPT_STATUS                   IOMEM(OMAP1510_FPGA_BASE + 0x101)
-#define OMAP1510P1_PPT_CONTROL                  IOMEM(OMAP1510_FPGA_BASE + 0x102)
-#define OMAP1510_FPGA_TOUCHSCREEN               IOMEM(OMAP1510_FPGA_BASE + 0x204)
-#define INNOVATOR_FPGA_INFO                     IOMEM(OMAP1510_FPGA_BASE + 0x205)
-#define INNOVATOR_FPGA_LCD_BRIGHT_LO            IOMEM(OMAP1510_FPGA_BASE + 0x206)
-#define INNOVATOR_FPGA_LCD_BRIGHT_HI            IOMEM(OMAP1510_FPGA_BASE + 0x207)
-#define INNOVATOR_FPGA_LED_GRN_LO               IOMEM(OMAP1510_FPGA_BASE + 0x208)
-#define INNOVATOR_FPGA_LED_GRN_HI               IOMEM(OMAP1510_FPGA_BASE + 0x209)
-#define INNOVATOR_FPGA_LED_RED_LO               IOMEM(OMAP1510_FPGA_BASE + 0x20a)
-#define INNOVATOR_FPGA_LED_RED_HI               IOMEM(OMAP1510_FPGA_BASE + 0x20b)
-#define INNOVATOR_FPGA_CAM_USB_CONTROL          IOMEM(OMAP1510_FPGA_BASE + 0x20c)
-#define INNOVATOR_FPGA_EXP_CONTROL              IOMEM(OMAP1510_FPGA_BASE + 0x20d)
-#define INNOVATOR_FPGA_ISR2                     IOMEM(OMAP1510_FPGA_BASE + 0x20e)
-#define INNOVATOR_FPGA_IMR2                     IOMEM(OMAP1510_FPGA_BASE + 0x210)
-#define OMAP1510_FPGA_ETHR_START                (OMAP1510_FPGA_START + 0x300)
-/*
- * Power up Giga UART driver, turn on HID clock.
- * Turn off BT power, since we're not using it and it
- * draws power.
- */
-#define OMAP1510_FPGA_RESET_VALUE               0x42
-#define OMAP1510_FPGA_PCR_IF_PD0                (1 << 7)
-#define OMAP1510_FPGA_PCR_COM2_EN               (1 << 6)
-#define OMAP1510_FPGA_PCR_COM1_EN               (1 << 5)
-#define OMAP1510_FPGA_PCR_EXP_PD0               (1 << 4)
-#define OMAP1510_FPGA_PCR_EXP_PD1               (1 << 3)
-#define OMAP1510_FPGA_PCR_48MHZ_CLK             (1 << 2)
-#define OMAP1510_FPGA_PCR_4MHZ_CLK              (1 << 1)
-#define OMAP1510_FPGA_PCR_RSRVD_BIT0            (1 << 0)
-/*
- * Innovator/OMAP1510 FPGA HID register bit definitions
- */
-#define OMAP1510_FPGA_HID_SCLK  (1<<0)  /* output */
-#define OMAP1510_FPGA_HID_MOSI  (1<<1)  /* output */
-#define OMAP1510_FPGA_HID_nSS   (1<<2)  /* output 0/1 chip idle/select */
-#define OMAP1510_FPGA_HID_nHSUS (1<<3)  /* output 0/1 host active/suspended */
-#define OMAP1510_FPGA_HID_MISO  (1<<4)  /* input */
-#define OMAP1510_FPGA_HID_ATN   (1<<5)  /* input  0/1 chip idle/ATN */
-#define OMAP1510_FPGA_HID_rsrvd (1<<6)
-#define OMAP1510_FPGA_HID_RESETn (1<<7) /* output - 0/1 USAR reset/run */
-/* The FPGA IRQ is cascaded through GPIO_13 */
-#define OMAP1510_INT_FPGA               (IH_GPIO_BASE + 13)
-/* IRQ Numbers for interrupts muxed through the FPGA */
-#define OMAP1510_INT_FPGA_ATN           (OMAP_FPGA_IRQ_BASE + 0)
-#define OMAP1510_INT_FPGA_ACK           (OMAP_FPGA_IRQ_BASE + 1)
-#define OMAP1510_INT_FPGA2              (OMAP_FPGA_IRQ_BASE + 2)
-#define OMAP1510_INT_FPGA3              (OMAP_FPGA_IRQ_BASE + 3)
-#define OMAP1510_INT_FPGA4              (OMAP_FPGA_IRQ_BASE + 4)
-#define OMAP1510_INT_FPGA5              (OMAP_FPGA_IRQ_BASE + 5)
-#define OMAP1510_INT_FPGA6              (OMAP_FPGA_IRQ_BASE + 6)
-#define OMAP1510_INT_FPGA7              (OMAP_FPGA_IRQ_BASE + 7)
-#define OMAP1510_INT_FPGA8              (OMAP_FPGA_IRQ_BASE + 8)
-#define OMAP1510_INT_FPGA9              (OMAP_FPGA_IRQ_BASE + 9)
-#define OMAP1510_INT_FPGA10             (OMAP_FPGA_IRQ_BASE + 10)
-#define OMAP1510_INT_FPGA11             (OMAP_FPGA_IRQ_BASE + 11)
-#define OMAP1510_INT_FPGA12             (OMAP_FPGA_IRQ_BASE + 12)
-#define OMAP1510_INT_ETHER              (OMAP_FPGA_IRQ_BASE + 13)
-#define OMAP1510_INT_FPGAUART1          (OMAP_FPGA_IRQ_BASE + 14)
-#define OMAP1510_INT_FPGAUART2          (OMAP_FPGA_IRQ_BASE + 15)
-#define OMAP1510_INT_FPGA_TS            (OMAP_FPGA_IRQ_BASE + 16)
-#define OMAP1510_INT_FPGA17             (OMAP_FPGA_IRQ_BASE + 17)
-#define OMAP1510_INT_FPGA_CAM           (OMAP_FPGA_IRQ_BASE + 18)
-#define OMAP1510_INT_FPGA_RTC_A         (OMAP_FPGA_IRQ_BASE + 19)
-#define OMAP1510_INT_FPGA_RTC_B         (OMAP_FPGA_IRQ_BASE + 20)
-#define OMAP1510_INT_FPGA_CD            (OMAP_FPGA_IRQ_BASE + 21)
-#define OMAP1510_INT_FPGA22             (OMAP_FPGA_IRQ_BASE + 22)
-#define OMAP1510_INT_FPGA23             (OMAP_FPGA_IRQ_BASE + 23)
-#endif
diff --git a/arch/arm/plat-omap/include/plat/multi.h b/arch/arm/plat-omap/include/plat/multi.h
deleted file mode 100644
index 324d31b14852..000000000000
--- a/arch/arm/plat-omap/include/plat/multi.h
+++ /dev/null
@@ -1,120 +0,0 @@
-/*
- * Support for compiling in multiple OMAP processors
- *
- * Copyright (C) 2010 Nokia Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
-#ifndef __PLAT_OMAP_MULTI_H
-#define __PLAT_OMAP_MULTI_H
-/*
- * Test if multicore OMAP support is needed
- */
-#undef MULTI_OMAP1
-#undef MULTI_OMAP2
-#undef OMAP_NAME
-#ifdef CONFIG_ARCH_OMAP730
-# ifdef OMAP_NAME
-#  undef  MULTI_OMAP1
-#  define MULTI_OMAP1
-# else
-#  define OMAP_NAME omap730
-# endif
-#endif
-#ifdef CONFIG_ARCH_OMAP850
-# ifdef OMAP_NAME
-#  undef  MULTI_OMAP1
-#  define MULTI_OMAP1
-# else
-#  define OMAP_NAME omap850
-# endif
-#endif
-#ifdef CONFIG_ARCH_OMAP15XX
-# ifdef OMAP_NAME
-#  undef  MULTI_OMAP1
-#  define MULTI_OMAP1
-# else
-#  define OMAP_NAME omap1510
-# endif
-#endif
-#ifdef CONFIG_ARCH_OMAP16XX
-# ifdef OMAP_NAME
-#  undef  MULTI_OMAP1
-#  define MULTI_OMAP1
-# else
-#  define OMAP_NAME omap16xx
-# endif
-#endif
-#ifdef CONFIG_ARCH_OMAP2PLUS
-# if (defined(OMAP_NAME) || defined(MULTI_OMAP1))
-#  error "OMAP1 and OMAP2PLUS can't be selected at the same time"
-# endif
-#endif
-#ifdef CONFIG_SOC_OMAP2420
-# ifdef OMAP_NAME
-#  undef  MULTI_OMAP2
-#  define MULTI_OMAP2
-# else
-#  define OMAP_NAME omap2420
-# endif
-#endif
-#ifdef CONFIG_SOC_OMAP2430
-# ifdef OMAP_NAME
-#  undef  MULTI_OMAP2
-#  define MULTI_OMAP2
-# else
-#  define OMAP_NAME omap2430
-# endif
-#endif
-#ifdef CONFIG_ARCH_OMAP3
-# ifdef OMAP_NAME
-#  undef  MULTI_OMAP2
-#  define MULTI_OMAP2
-# else
-#  define OMAP_NAME omap3
-# endif
-#endif
-#ifdef CONFIG_ARCH_OMAP4
-# ifdef OMAP_NAME
-#  undef  MULTI_OMAP2
-#  define MULTI_OMAP2
-# else
-#  define OMAP_NAME omap4
-# endif
-#endif
-#ifdef CONFIG_SOC_OMAP5
-# ifdef OMAP_NAME
-#  undef  MULTI_OMAP2
-#  define MULTI_OMAP2
-# else
-#  define OMAP_NAME omap5
-# endif
-#endif
-#ifdef CONFIG_SOC_AM33XX
-# ifdef OMAP_NAME
-#  undef  MULTI_OMAP2
-#  define MULTI_OMAP2
-# else
-#  define OMAP_NAME am33xx
-# endif
-#endif
-#endif  /* __PLAT_OMAP_MULTI_H */
diff --git a/arch/arm/plat-omap/include/plat/omap-secure.h b/arch/arm/plat-omap/include/plat/omap-secure.h
deleted file mode 100644
index 0e4acd2d2deb..000000000000
--- a/arch/arm/plat-omap/include/plat/omap-secure.h
+++ /dev/null
@@ -1,14 +0,0 @@
-#ifndef __OMAP_SECURE_H__
-#define __OMAP_SECURE_H__
-#include <linux/types.h>
-extern int omap_secure_ram_reserve_memblock(void);
-#ifdef CONFIG_OMAP4_ERRATA_I688
-extern int omap_barrier_reserve_memblock(void);
-#else
-static inline void omap_barrier_reserve_memblock(void)
-{ }
-#endif
-#endif /* __OMAP_SECURE_H__ */
diff --git a/arch/arm/plat-omap/include/plat/sdrc.h b/arch/arm/plat-omap/include/plat/sdrc.h
deleted file mode 100644
index 36d6a7666216..000000000000
--- a/arch/arm/plat-omap/include/plat/sdrc.h
+++ /dev/null
@@ -1,164 +0,0 @@
-#ifndef ____ASM_ARCH_SDRC_H
-#define ____ASM_ARCH_SDRC_H
-/*
- * OMAP2/3 SDRC/SMS register definitions
- *
- * Copyright (C) 2007-2008 Texas Instruments, Inc.
- * Copyright (C) 2007-2008 Nokia Corporation
- *
- * Tony Lindgren
- * Paul Walmsley
- * Richard Woodruff
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-/* SDRC register offsets - read/write with sdrc_{read,write}_reg() */
-#define SDRC_SYSCONFIG          0x010
-#define SDRC_CS_CFG             0x040
-#define SDRC_SHARING            0x044
-#define SDRC_ERR_TYPE           0x04C
-#define SDRC_DLLA_CTRL          0x060
-#define SDRC_DLLA_STATUS        0x064
-#define SDRC_DLLB_CTRL          0x068
-#define SDRC_DLLB_STATUS        0x06C
-#define SDRC_POWER              0x070
-#define SDRC_MCFG_0             0x080
-#define SDRC_MR_0               0x084
-#define SDRC_EMR2_0             0x08c
-#define SDRC_ACTIM_CTRL_A_0     0x09c
-#define SDRC_ACTIM_CTRL_B_0     0x0a0
-#define SDRC_RFR_CTRL_0         0x0a4
-#define SDRC_MANUAL_0           0x0a8
-#define SDRC_MCFG_1             0x0B0
-#define SDRC_MR_1               0x0B4
-#define SDRC_EMR2_1             0x0BC
-#define SDRC_ACTIM_CTRL_A_1     0x0C4
-#define SDRC_ACTIM_CTRL_B_1     0x0C8
-#define SDRC_RFR_CTRL_1         0x0D4
-#define SDRC_MANUAL_1           0x0D8
-#define SDRC_POWER_AUTOCOUNT_SHIFT      8
-#define SDRC_POWER_AUTOCOUNT_MASK       (0xffff << SDRC_POWER_AUTOCOUNT_SHIFT)
-#define SDRC_POWER_CLKCTRL_SHIFT        4
-#define SDRC_POWER_CLKCTRL_MASK         (0x3 << SDRC_POWER_CLKCTRL_SHIFT)
-#define SDRC_SELF_REFRESH_ON_AUTOCOUNT  (0x2 << SDRC_POWER_CLKCTRL_SHIFT)
-/*
- * These values represent the number of memory clock cycles between
- * autorefresh initiation.  They assume 1 refresh per 64 ms (JEDEC), 8192
- * rows per device, and include a subtraction of a 50 cycle window in the
- * event that the autorefresh command is delayed due to other SDRC activity.
- * The '| 1' sets the ARE field to send one autorefresh when the autorefresh
- * counter reaches 0.
- *
- * These represent optimal values for common parts, it won't work for all.
- * As long as you scale down, most parameters are still work, they just
- * become sub-optimal. The RFR value goes in the opposite direction. If you
- * don't adjust it down as your clock period increases the refresh interval
- * will not be met. Setting all parameters for complete worst case may work,
- * but may cut memory performance by 2x. Due to errata the DLLs need to be
- * unlocked and their value needs run time calibration. A dynamic call is
- * need for that as no single right value exists acorss production samples.
- *
- * Only the FULL speed values are given. Current code is such that rate
- * changes must be made at DPLLoutx2. The actual value adjustment for low
- * frequency operation will be handled by omap_set_performance()
- *
- * By having the boot loader boot up in the fastest L4 speed available likely
- * will result in something which you can switch between.
- */
-#define SDRC_RFR_CTRL_165MHz    (0x00044c00 | 1)
-#define SDRC_RFR_CTRL_133MHz    (0x0003de00 | 1)
-#define SDRC_RFR_CTRL_100MHz    (0x0002da01 | 1)
-#define SDRC_RFR_CTRL_110MHz    (0x0002da01 | 1) /* Need to calc */
-#define SDRC_RFR_CTRL_BYPASS    (0x00005000 | 1) /* Need to calc */
-/*
- * SMS register access
- */
-#define OMAP242X_SMS_REGADDR(reg)                                       \
-                (void __iomem *)OMAP2_L3_IO_ADDRESS(OMAP2420_SMS_BASE + reg)
-#define OMAP243X_SMS_REGADDR(reg)                                       \
-                (void __iomem *)OMAP2_L3_IO_ADDRESS(OMAP243X_SMS_BASE + reg)
-#define OMAP343X_SMS_REGADDR(reg)                                       \
-                (void __iomem *)OMAP2_L3_IO_ADDRESS(OMAP343X_SMS_BASE + reg)
-/* SMS register offsets - read/write with sms_{read,write}_reg() */
-#define SMS_SYSCONFIG                   0x010
-#define SMS_ROT_CONTROL(context)        (0x180 + 0x10 * context)
-#define SMS_ROT_SIZE(context)           (0x184 + 0x10 * context)
-#define SMS_ROT_PHYSICAL_BA(context)    (0x188 + 0x10 * context)
-/* REVISIT: fill in other SMS registers here */
-#ifndef __ASSEMBLER__
-/**
- * struct omap_sdrc_params - SDRC parameters for a given SDRC clock rate
- * @rate: SDRC clock rate (in Hz)
- * @actim_ctrla: Value to program to SDRC_ACTIM_CTRLA for this rate
- * @actim_ctrlb: Value to program to SDRC_ACTIM_CTRLB for this rate
- * @rfr_ctrl: Value to program to SDRC_RFR_CTRL for this rate
- * @mr: Value to program to SDRC_MR for this rate
- *
- * This structure holds a pre-computed set of register values for the
- * SDRC for a given SDRC clock rate and SDRAM chip.  These are
- * intended to be pre-computed and specified in an array in the board-*.c
- * files.  The structure is keyed off the 'rate' field.
- */
-struct omap_sdrc_params {
-        unsigned long rate;
-        u32 actim_ctrla;
-        u32 actim_ctrlb;
-        u32 rfr_ctrl;
-        u32 mr;
-};
-#ifdef CONFIG_SOC_HAS_OMAP2_SDRC
-void omap2_sdrc_init(struct omap_sdrc_params *sdrc_cs0,
-                            struct omap_sdrc_params *sdrc_cs1);
-#else
-static inline void __init omap2_sdrc_init(struct omap_sdrc_params *sdrc_cs0,
-                                          struct omap_sdrc_params *sdrc_cs1) {};
-#endif
-int omap2_sdrc_get_params(unsigned long r,
-                          struct omap_sdrc_params **sdrc_cs0,
-                          struct omap_sdrc_params **sdrc_cs1);
-void omap2_sms_save_context(void);
-void omap2_sms_restore_context(void);
-void omap2_sms_write_rot_control(u32 val, unsigned ctx);
-void omap2_sms_write_rot_size(u32 val, unsigned ctx);
-void omap2_sms_write_rot_physical_ba(u32 val, unsigned ctx);
-#ifdef CONFIG_ARCH_OMAP2
-struct memory_timings {
-        u32 m_type;             /* ddr = 1, sdr = 0 */
-        u32 dll_mode;           /* use lock mode = 1, unlock mode = 0 */
-        u32 slow_dll_ctrl;      /* unlock mode, dll value for slow speed */
-        u32 fast_dll_ctrl;      /* unlock mode, dll value for fast speed */
-        u32 base_cs;            /* base chip select to use for calculations */
-};
-extern void omap2xxx_sdrc_init_params(u32 force_lock_to_unlock_mode);
-struct omap_sdrc_params *rx51_get_sdram_timings(void);
-u32 omap2xxx_sdrc_dll_is_unlocked(void);
-u32 omap2xxx_sdrc_reprogram(u32 level, u32 force);
-#endif  /* CONFIG_ARCH_OMAP2 */
-#endif  /* __ASSEMBLER__ */
-#endif
diff --git a/arch/arm/plat-omap/include/plat/sram.h b/arch/arm/plat-omap/include/plat/sram.h
deleted file mode 100644
index 227ae2657554..000000000000
--- a/arch/arm/plat-omap/include/plat/sram.h
+++ /dev/null
@@ -1,105 +0,0 @@
-/*
- * arch/arm/plat-omap/include/mach/sram.h
- *
- * Interface for functions that need to be run in internal SRAM
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ARCH_ARM_OMAP_SRAM_H
-#define __ARCH_ARM_OMAP_SRAM_H
-#ifndef __ASSEMBLY__
-#include <asm/fncpy.h>
-extern void *omap_sram_push_address(unsigned long size);
-/* Macro to push a function to the internal SRAM, using the fncpy API */
-#define omap_sram_push(funcp, size) ({                          \
-        typeof(&(funcp)) _res = NULL;                           \
-        void *_sram_address = omap_sram_push_address(size);     \
-        if (_sram_address)                                      \
-                _res = fncpy(_sram_address, &(funcp), size);    \
-        _res;                                                   \
-})
-extern void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl);
-extern void omap2_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
-                                u32 base_cs, u32 force_unlock);
-extern void omap2_sram_reprogram_sdrc(u32 perf_level, u32 dll_val,
-                                      u32 mem_type);
-extern u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass);
-extern u32 omap3_configure_core_dpll(
-                        u32 m2, u32 unlock_dll, u32 f, u32 inc,
-                        u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0,
-                        u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0,
-                        u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1,
-                        u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1);
-extern void omap3_sram_restore_context(void);
-/* Do not use these */
-extern void omap1_sram_reprogram_clock(u32 ckctl, u32 dpllctl);
-extern unsigned long omap1_sram_reprogram_clock_sz;
-extern void omap24xx_sram_reprogram_clock(u32 ckctl, u32 dpllctl);
-extern unsigned long omap24xx_sram_reprogram_clock_sz;
-extern void omap242x_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
-                                                u32 base_cs, u32 force_unlock);
-extern unsigned long omap242x_sram_ddr_init_sz;
-extern u32 omap242x_sram_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val,
-                                                int bypass);
-extern unsigned long omap242x_sram_set_prcm_sz;
-extern void omap242x_sram_reprogram_sdrc(u32 perf_level, u32 dll_val,
-                                                u32 mem_type);
-extern unsigned long omap242x_sram_reprogram_sdrc_sz;
-extern void omap243x_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
-                                                u32 base_cs, u32 force_unlock);
-extern unsigned long omap243x_sram_ddr_init_sz;
-extern u32 omap243x_sram_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val,
-                                                int bypass);
-extern unsigned long omap243x_sram_set_prcm_sz;
-extern void omap243x_sram_reprogram_sdrc(u32 perf_level, u32 dll_val,
-                                                u32 mem_type);
-extern unsigned long omap243x_sram_reprogram_sdrc_sz;
-extern u32 omap3_sram_configure_core_dpll(
-                        u32 m2, u32 unlock_dll, u32 f, u32 inc,
-                        u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0,
-                        u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0,
-                        u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1,
-                        u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1);
-extern unsigned long omap3_sram_configure_core_dpll_sz;
-#ifdef CONFIG_PM
-extern void omap_push_sram_idle(void);
-#else
-static inline void omap_push_sram_idle(void) {}
-#endif /* CONFIG_PM */
-#endif /* __ASSEMBLY__ */
-/*
- * OMAP2+: define the SRAM PA addresses.
- * Used by the SRAM management code and the idle sleep code.
- */
-#define OMAP2_SRAM_PA           0x40200000
-#define OMAP3_SRAM_PA           0x40200000
-#ifdef CONFIG_OMAP4_ERRATA_I688
-#define OMAP4_SRAM_PA           0x40304000
-#define OMAP4_SRAM_VA           0xfe404000
-#else
-#define OMAP4_SRAM_PA           0x40300000
-#endif
-#define AM33XX_SRAM_PA          0x40300000
-#endif
diff --git a/arch/arm/plat-omap/omap-pm-noop.c b/arch/arm/plat-omap/omap-pm-noop.c
index 9722f418ae1f..198685b894b0 100644
--- a/arch/arm/plat-omap/omap-pm-noop.c
+++ b/arch/arm/plat-omap/omap-pm-noop.c
@@ -22,9 +22,8 @@
 #include <linux/device.h>
 #include <linux/platform_device.h>
-/* Interface documentation is in mach/omap-pm.h */
+#include "../mach-omap2/omap_device.h"
-#include <plat/omap-pm.h>
+#include "../mach-omap2/omap-pm.h"
-#include <plat/omap_device.h>
 static bool off_mode_enabled;
 static int dummy_context_loss_counter;
diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c
index 28acb383e7df..70dcc225157f 100644
--- a/arch/arm/plat-omap/sram.c
+++ b/arch/arm/plat-omap/sram.c
@@ -25,8 +25,8 @@
 #include <asm/mach/map.h>
-#include <plat/sram.h>
+#include "../mach-omap1/soc.h"
-#include <plat/cpu.h>
+#include "../mach-omap2/soc.h"
 #include "sram.h"
diff --git a/arch/arm/plat-omap/sram.h b/arch/arm/plat-omap/sram.h
index 29b43ef97f20..cefda2e09869 100644
--- a/arch/arm/plat-omap/sram.h
+++ b/arch/arm/plat-omap/sram.h
@@ -1,6 +1,107 @@
-#ifndef __PLAT_OMAP_SRAM_H__
+/*
-#define __PLAT_OMAP_SRAM_H__
+ * arch/arm/plat-omap/include/mach/sram.h
+ *
+ * Interface for functions that need to be run in internal SRAM
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
-extern int __init omap_sram_init(void);
+#ifndef __ARCH_ARM_OMAP_SRAM_H
+#define __ARCH_ARM_OMAP_SRAM_H
-#endif /* __PLAT_OMAP_SRAM_H__ */
+#ifndef __ASSEMBLY__
+#include <asm/fncpy.h>
+int __init omap_sram_init(void);
+extern void *omap_sram_push_address(unsigned long size);
+/* Macro to push a function to the internal SRAM, using the fncpy API */
+#define omap_sram_push(funcp, size) ({                          \
+        typeof(&(funcp)) _res = NULL;                           \
+        void *_sram_address = omap_sram_push_address(size);     \
+        if (_sram_address)                                      \
+                _res = fncpy(_sram_address, &(funcp), size);    \
+        _res;                                                   \
+})
+extern void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl);
+extern void omap2_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
+                                u32 base_cs, u32 force_unlock);
+extern void omap2_sram_reprogram_sdrc(u32 perf_level, u32 dll_val,
+                                      u32 mem_type);
+extern u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass);
+extern u32 omap3_configure_core_dpll(
+                        u32 m2, u32 unlock_dll, u32 f, u32 inc,
+                        u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0,
+                        u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0,
+                        u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1,
+                        u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1);
+extern void omap3_sram_restore_context(void);
+/* Do not use these */
+extern void omap1_sram_reprogram_clock(u32 ckctl, u32 dpllctl);
+extern unsigned long omap1_sram_reprogram_clock_sz;
+extern void omap24xx_sram_reprogram_clock(u32 ckctl, u32 dpllctl);
+extern unsigned long omap24xx_sram_reprogram_clock_sz;
+extern void omap242x_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
+                                                u32 base_cs, u32 force_unlock);
+extern unsigned long omap242x_sram_ddr_init_sz;
+extern u32 omap242x_sram_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val,
+                                                int bypass);
+extern unsigned long omap242x_sram_set_prcm_sz;
+extern void omap242x_sram_reprogram_sdrc(u32 perf_level, u32 dll_val,
+                                                u32 mem_type);
+extern unsigned long omap242x_sram_reprogram_sdrc_sz;
+extern void omap243x_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
+                                                u32 base_cs, u32 force_unlock);
+extern unsigned long omap243x_sram_ddr_init_sz;
+extern u32 omap243x_sram_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val,
+                                                int bypass);
+extern unsigned long omap243x_sram_set_prcm_sz;
+extern void omap243x_sram_reprogram_sdrc(u32 perf_level, u32 dll_val,
+                                                u32 mem_type);
+extern unsigned long omap243x_sram_reprogram_sdrc_sz;
+extern u32 omap3_sram_configure_core_dpll(
+                        u32 m2, u32 unlock_dll, u32 f, u32 inc,
+                        u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0,
+                        u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0,
+                        u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1,
+                        u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1);
+extern unsigned long omap3_sram_configure_core_dpll_sz;
+#ifdef CONFIG_PM
+extern void omap_push_sram_idle(void);
+#else
+static inline void omap_push_sram_idle(void) {}
+#endif /* CONFIG_PM */
+#endif /* __ASSEMBLY__ */
+/*
+ * OMAP2+: define the SRAM PA addresses.
+ * Used by the SRAM management code and the idle sleep code.
+ */
+#define OMAP2_SRAM_PA           0x40200000
+#define OMAP3_SRAM_PA           0x40200000
+#ifdef CONFIG_OMAP4_ERRATA_I688
+#define OMAP4_SRAM_PA           0x40304000
+#define OMAP4_SRAM_VA           0xfe404000
+#else
+#define OMAP4_SRAM_PA           0x40300000
+#endif
+#define AM33XX_SRAM_PA          0x40300000
+#endif
diff --git a/drivers/char/hw_random/omap-rng.c b/drivers/char/hw_random/omap-rng.c
index a5effd813abd..45e467dcc8c8 100644
--- a/drivers/char/hw_random/omap-rng.c
+++ b/drivers/char/hw_random/omap-rng.c
@@ -27,8 +27,6 @@
 #include <asm/io.h>
-#include <plat/cpu.h>
 #define RNG_OUT_REG             0x00            /* Output register */
 #define RNG_STAT_REG            0x04            /* Status register
                                                        [0] = STAT_BUSY */
diff --git a/drivers/crypto/omap-aes.c b/drivers/crypto/omap-aes.c
index 093a8af59cbe..649a146e1382 100644
--- a/drivers/crypto/omap-aes.c
+++ b/drivers/crypto/omap-aes.c
@@ -29,8 +29,7 @@
 #include <crypto/scatterwalk.h>
 #include <crypto/aes.h>
-#include <plat/cpu.h>
+#include <plat-omap/dma-omap.h>
-#include <plat/dma.h>
 /* OMAP TRM gives bitfields as start:end, where start is the higher bit
   number. For example 7:0 */
@@ -941,11 +940,6 @@ static int __init omap_aes_mod_init(void)
 {
        pr_info("loading %s driver\n", "omap-aes");
-        if (!cpu_class_is_omap2() || omap_type() != OMAP2_DEVICE_TYPE_SEC) {
-                pr_err("Unsupported cpu\n");
-                return -ENODEV;
-        }
        return  platform_driver_register(&omap_aes_driver);
 }
diff --git a/drivers/crypto/omap-sham.c b/drivers/crypto/omap-sham.c
index a3fd6fc504b1..d76fe06b9417 100644
--- a/drivers/crypto/omap-sham.c
+++ b/drivers/crypto/omap-sham.c
@@ -37,8 +37,7 @@
 #include <crypto/hash.h>
 #include <crypto/internal/hash.h>
-#include <plat/cpu.h>
+#include <plat-omap/dma-omap.h>
-#include <plat/dma.h>
 #include <mach/irqs.h>
 #define SHA_REG_DIGEST(x)               (0x00 + ((x) * 0x04))
@@ -1289,13 +1288,6 @@ static int __init omap_sham_mod_init(void)
 {
        pr_info("loading %s driver\n", "omap-sham");
-        if (!cpu_class_is_omap2() ||
-                (omap_type() != OMAP2_DEVICE_TYPE_SEC &&
-                        omap_type() != OMAP2_DEVICE_TYPE_EMU)) {
-                pr_err("Unsupported cpu\n");
-                return -ENODEV;
-        }
        return platform_driver_register(&omap_sham_driver);
 }
diff --git a/drivers/dma/omap-dma.c b/drivers/dma/omap-dma.c
index bb2d8e7029eb..56d925312a5c 100644
--- a/drivers/dma/omap-dma.c
+++ b/drivers/dma/omap-dma.c
@@ -19,8 +19,13 @@
 #include "virt-dma.h"
-#include <plat/cpu.h>
+#include <plat-omap/dma-omap.h>
-#include <plat/dma.h>
+#ifdef CONFIG_ARCH_OMAP2PLUS
+#define dma_omap2plus() 1
+#else
+#define dma_omap2plus() 0
+#endif
 struct omap_dmadev {
        struct dma_device ddev;
@@ -438,7 +443,7 @@ static struct dma_async_tx_descriptor *omap_dma_prep_dma_cyclic(
                omap_disable_dma_irq(c->dma_ch, OMAP_DMA_BLOCK_IRQ);
        }
-        if (!cpu_class_is_omap1()) {
+        if (dma_omap2plus()) {
                omap_set_dma_src_burst_mode(c->dma_ch, OMAP_DMA_DATA_BURST_16);
                omap_set_dma_dest_burst_mode(c->dma_ch, OMAP_DMA_DATA_BURST_16);
        }
diff --git a/drivers/media/platform/omap/omap_vout.c b/drivers/media/platform/omap/omap_vout.c
index a3b1a34c896d..4b1becc86e54 100644
--- a/drivers/media/platform/omap/omap_vout.c
+++ b/drivers/media/platform/omap/omap_vout.c
@@ -45,8 +45,8 @@
 #include <media/v4l2-ioctl.h>
 #include <plat/cpu.h>
-#include <plat/dma.h>
+#include <plat-omap/dma-omap.h>
-#include <plat/vrfb.h>
+#include <video/omapvrfb.h>
 #include <video/omapdss.h>
 #include "omap_voutlib.h"
diff --git a/drivers/media/platform/omap/omap_vout_vrfb.c b/drivers/media/platform/omap/omap_vout_vrfb.c
index 4be26abf6cea..8340445a0ee5 100644
--- a/drivers/media/platform/omap/omap_vout_vrfb.c
+++ b/drivers/media/platform/omap/omap_vout_vrfb.c
@@ -16,12 +16,14 @@
 #include <media/videobuf-dma-contig.h>
 #include <media/v4l2-device.h>
-#include <plat/dma.h>
+#include <plat-omap/dma-omap.h>
-#include <plat/vrfb.h>
+#include <video/omapvrfb.h>
 #include "omap_voutdef.h"
 #include "omap_voutlib.h"
+#define OMAP_DMA_NO_DEVICE      0
 /*
 * Function for allocating video buffers
 */
diff --git a/drivers/media/platform/omap/omap_voutdef.h b/drivers/media/platform/omap/omap_voutdef.h
index 27a95d23b913..9ccfe1f475a4 100644
--- a/drivers/media/platform/omap/omap_voutdef.h
+++ b/drivers/media/platform/omap/omap_voutdef.h
@@ -12,7 +12,7 @@
 #define OMAP_VOUTDEF_H
 #include <video/omapdss.h>
-#include <plat/vrfb.h>
+#include <video/omapvrfb.h>
 #define YUYV_BPP        2
 #define RGB565_BPP      2
diff --git a/drivers/media/platform/omap3isp/isphist.c b/drivers/media/platform/omap3isp/isphist.c
index d1a8dee5e1ca..e7f9c4292cc6 100644
--- a/drivers/media/platform/omap3isp/isphist.c
+++ b/drivers/media/platform/omap3isp/isphist.c
@@ -34,6 +34,8 @@
 #include "ispreg.h"
 #include "isphist.h"
+#define OMAP24XX_DMA_NO_DEVICE          0
 #define HIST_CONFIG_DMA 1
 #define HIST_USING_DMA(hist) ((hist)->dma_ch >= 0)
diff --git a/drivers/media/platform/omap3isp/ispstat.h b/drivers/media/platform/omap3isp/ispstat.h
index a6fe653eb237..40f87cdd7994 100644
--- a/drivers/media/platform/omap3isp/ispstat.h
+++ b/drivers/media/platform/omap3isp/ispstat.h
@@ -30,7 +30,7 @@
 #include <linux/types.h>
 #include <linux/omap3isp.h>
-#include <plat/dma.h>
+#include <plat-omap/dma-omap.h>
 #include <media/v4l2-event.h>
 #include "isp.h"
diff --git a/drivers/media/platform/soc_camera/omap1_camera.c b/drivers/media/platform/soc_camera/omap1_camera.c
index fa08c7695ccb..cae9ce6275e9 100644
--- a/drivers/media/platform/soc_camera/omap1_camera.c
+++ b/drivers/media/platform/soc_camera/omap1_camera.c
@@ -34,12 +34,13 @@
 #include <media/videobuf-dma-contig.h>
 #include <media/videobuf-dma-sg.h>
-#include <plat/dma.h>
+#include <plat-omap/dma-omap.h>
 #define DRIVER_NAME             "omap1-camera"
 #define DRIVER_VERSION          "0.0.2"
+#define OMAP_DMA_CAMERA_IF_RX           20
 /*
 * ---------------------------------------------------------------------------
diff --git a/drivers/media/rc/ir-rx51.c b/drivers/media/rc/ir-rx51.c
index 546199e9ccc7..82e6c1e282d5 100644
--- a/drivers/media/rc/ir-rx51.c
+++ b/drivers/media/rc/ir-rx51.c
@@ -28,7 +28,6 @@
 #include <plat/dmtimer.h>
 #include <plat/clock.h>
-#include <plat/omap-pm.h>
 #include <media/lirc.h>
 #include <media/lirc_dev.h>
diff --git a/drivers/mmc/host/omap.c b/drivers/mmc/host/omap.c
index 48ad361613ef..ae115c01283b 100644
--- a/drivers/mmc/host/omap.c
+++ b/drivers/mmc/host/omap.c
@@ -28,9 +28,8 @@
 #include <linux/clk.h>
 #include <linux/scatterlist.h>
 #include <linux/slab.h>
+#include <linux/platform_data/mmc-omap.h>
-#include <plat/mmc.h>
-#include <plat/dma.h>
 #define OMAP_MMC_REG_CMD        0x00
 #define OMAP_MMC_REG_ARGL       0x01
@@ -72,6 +71,13 @@
 #define OMAP_MMC_STAT_CARD_BUSY         (1 <<  2)
 #define OMAP_MMC_STAT_END_OF_CMD        (1 <<  0)
+#define mmc_omap7xx()   (host->features & MMC_OMAP7XX)
+#define mmc_omap15xx()  (host->features & MMC_OMAP15XX)
+#define mmc_omap16xx()  (host->features & MMC_OMAP16XX)
+#define MMC_OMAP1_MASK  (MMC_OMAP7XX | MMC_OMAP15XX | MMC_OMAP16XX)
+#define mmc_omap1()     (host->features & MMC_OMAP1_MASK)
+#define mmc_omap2()     (!mmc_omap1())
 #define OMAP_MMC_REG(host, reg)         (OMAP_MMC_REG_##reg << (host)->reg_shift)
 #define OMAP_MMC_READ(host, reg)        __raw_readw((host)->virt_base + OMAP_MMC_REG(host, reg))
 #define OMAP_MMC_WRITE(host, reg, val)  __raw_writew((val), (host)->virt_base + OMAP_MMC_REG(host, reg))
@@ -84,6 +90,16 @@
 #define OMAP_MMC_CMDTYPE_AC     2
 #define OMAP_MMC_CMDTYPE_ADTC   3
+#define OMAP_DMA_MMC_TX         21
+#define OMAP_DMA_MMC_RX         22
+#define OMAP_DMA_MMC2_TX        54
+#define OMAP_DMA_MMC2_RX        55
+#define OMAP24XX_DMA_MMC2_TX    47
+#define OMAP24XX_DMA_MMC2_RX    48
+#define OMAP24XX_DMA_MMC1_TX    61
+#define OMAP24XX_DMA_MMC1_RX    62
 #define DRIVER_NAME "mmci-omap"
@@ -147,6 +163,7 @@ struct mmc_omap_host {
        u32                     buffer_bytes_left;
        u32                     total_bytes_left;
+        unsigned                features;
        unsigned                use_dma:1;
        unsigned                brs_received:1, dma_done:1;
        unsigned                dma_in_use:1;
@@ -988,7 +1005,7 @@ mmc_omap_prepare_data(struct mmc_omap_host *host, struct mmc_request *req)
                 * blocksize is at least that large. Blocksize is
                 * usually 512 bytes; but not for some SD reads.
                 */
-                burst = cpu_is_omap15xx() ? 32 : 64;
+                burst = mmc_omap15xx() ? 32 : 64;
                if (burst > data->blksz)
                        burst = data->blksz;
@@ -1104,8 +1121,7 @@ static void mmc_omap_set_power(struct mmc_omap_slot *slot, int power_on,
        if (slot->pdata->set_power != NULL)
                slot->pdata->set_power(mmc_dev(slot->mmc), slot->id, power_on,
                                        vdd);
+        if (mmc_omap2()) {
-        if (cpu_is_omap24xx()) {
                u16 w;
                if (power_on) {
@@ -1239,7 +1255,7 @@ static int __devinit mmc_omap_new_slot(struct mmc_omap_host *host, int id)
        mmc->ops = &mmc_omap_ops;
        mmc->f_min = 400000;
-        if (cpu_class_is_omap2())
+        if (mmc_omap2())
                mmc->f_max = 48000000;
        else
                mmc->f_max = 24000000;
@@ -1359,6 +1375,7 @@ static int __devinit mmc_omap_probe(struct platform_device *pdev)
        init_waitqueue_head(&host->slot_wq);
        host->pdata = pdata;
+        host->features = host->pdata->slots[0].features;
        host->dev = &pdev->dev;
        platform_set_drvdata(pdev, host);
@@ -1391,7 +1408,7 @@ static int __devinit mmc_omap_probe(struct platform_device *pdev)
        host->dma_tx_burst = -1;
        host->dma_rx_burst = -1;
-        if (cpu_is_omap24xx())
+        if (mmc_omap2())
                sig = host->id == 0 ? OMAP24XX_DMA_MMC1_TX : OMAP24XX_DMA_MMC2_TX;
        else
                sig = host->id == 0 ? OMAP_DMA_MMC_TX : OMAP_DMA_MMC2_TX;
@@ -1407,7 +1424,7 @@ static int __devinit mmc_omap_probe(struct platform_device *pdev)
                dev_warn(host->dev, "unable to obtain TX DMA engine channel %u\n",
                        sig);
 #endif
-        if (cpu_is_omap24xx())
+        if (mmc_omap2())
                sig = host->id == 0 ? OMAP24XX_DMA_MMC1_RX : OMAP24XX_DMA_MMC2_RX;
        else
                sig = host->id == 0 ? OMAP_DMA_MMC_RX : OMAP_DMA_MMC2_RX;
@@ -1435,7 +1452,7 @@ static int __devinit mmc_omap_probe(struct platform_device *pdev)
        }
        host->nr_slots = pdata->nr_slots;
-        host->reg_shift = (cpu_is_omap7xx() ? 1 : 2);
+        host->reg_shift = (mmc_omap7xx() ? 1 : 2);
        host->mmc_omap_wq = alloc_workqueue("mmc_omap", 0, 0);
        if (!host->mmc_omap_wq)
diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index 54bfd0cc106b..9b24bd46aad3 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -38,9 +38,7 @@
 #include <linux/gpio.h>
 #include <linux/regulator/consumer.h>
 #include <linux/pm_runtime.h>
-#include <mach/hardware.h>
+#include <linux/platform_data/mmc-omap.h>
-#include <plat/mmc.h>
-#include <plat/cpu.h>
 /* OMAP HSMMC Host Controller Registers */
 #define OMAP_HSMMC_SYSSTATUS    0x0014
diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c
index 5b3138620646..5c8978e90240 100644
--- a/drivers/mtd/nand/omap2.c
+++ b/drivers/mtd/nand/omap2.c
@@ -27,8 +27,7 @@
 #include <linux/bch.h>
 #endif
-#include <plat/dma.h>
+#include <plat-omap/dma-omap.h>
-#include <plat/gpmc.h>
 #include <linux/platform_data/mtd-nand-omap2.h>
 #define DRIVER_NAME     "omap2-nand"
@@ -106,10 +105,18 @@
 #define CS_MASK                         0x7
 #define ENABLE_PREFETCH                 (0x1 << 7)
 #define DMA_MPU_MODE_SHIFT              2
+#define ECCSIZE0_SHIFT                  12
 #define ECCSIZE1_SHIFT                  22
 #define ECC1RESULTSIZE                  0x1
 #define ECCCLEAR                        0x100
 #define ECC1                            0x1
+#define PREFETCH_FIFOTHRESHOLD_MAX      0x40
+#define PREFETCH_FIFOTHRESHOLD(val)     ((val) << 8)
+#define PREFETCH_STATUS_COUNT(val)      (val & 0x00003fff)
+#define PREFETCH_STATUS_FIFO_CNT(val)   ((val >> 24) & 0x7F)
+#define STATUS_BUFF_EMPTY               0x00000001
+#define OMAP24XX_DMA_GPMC               4
 /* oob info generated runtime depending on ecc algorithm and layout selected */
 static struct nand_ecclayout omap_oobinfo;
@@ -269,7 +276,7 @@ static void omap_write_buf8(struct mtd_info *mtd, const u_char *buf, int len)
                /* wait until buffer is available for write */
                do {
                        status = readl(info->reg.gpmc_status) &
-                                        GPMC_STATUS_BUFF_EMPTY;
+                                        STATUS_BUFF_EMPTY;
                } while (!status);
        }
 }
@@ -307,7 +314,7 @@ static void omap_write_buf16(struct mtd_info *mtd, const u_char * buf, int len)
                /* wait until buffer is available for write */
                do {
                        status = readl(info->reg.gpmc_status) &
-                                        GPMC_STATUS_BUFF_EMPTY;
+                                        STATUS_BUFF_EMPTY;
                } while (!status);
        }
 }
@@ -348,7 +355,7 @@ static void omap_read_buf_pref(struct mtd_info *mtd, u_char *buf, int len)
        } else {
                do {
                        r_count = readl(info->reg.gpmc_prefetch_status);
-                        r_count = GPMC_PREFETCH_STATUS_FIFO_CNT(r_count);
+                        r_count = PREFETCH_STATUS_FIFO_CNT(r_count);
                        r_count = r_count >> 2;
                        ioread32_rep(info->nand.IO_ADDR_R, p, r_count);
                        p += r_count;
@@ -395,7 +402,7 @@ static void omap_write_buf_pref(struct mtd_info *mtd,
        } else {
                while (len) {
                        w_count = readl(info->reg.gpmc_prefetch_status);
-                        w_count = GPMC_PREFETCH_STATUS_FIFO_CNT(w_count);
+                        w_count = PREFETCH_STATUS_FIFO_CNT(w_count);
                        w_count = w_count >> 1;
                        for (i = 0; (i < w_count) && len; i++, len -= 2)
                                iowrite16(*p++, info->nand.IO_ADDR_W);
@@ -407,7 +414,7 @@ static void omap_write_buf_pref(struct mtd_info *mtd,
                do {
                        cpu_relax();
                        val = readl(info->reg.gpmc_prefetch_status);
-                        val = GPMC_PREFETCH_STATUS_COUNT(val);
+                        val = PREFETCH_STATUS_COUNT(val);
                } while (val && (tim++ < limit));
                /* disable and stop the PFPW engine */
@@ -493,7 +500,7 @@ static inline int omap_nand_dma_transfer(struct mtd_info *mtd, void *addr,
        do {
                cpu_relax();
                val = readl(info->reg.gpmc_prefetch_status);
-                val = GPMC_PREFETCH_STATUS_COUNT(val);
+                val = PREFETCH_STATUS_COUNT(val);
        } while (val && (tim++ < limit));
        /* disable and stop the PFPW engine */
@@ -556,7 +563,7 @@ static irqreturn_t omap_nand_irq(int this_irq, void *dev)
        u32 bytes;
        bytes = readl(info->reg.gpmc_prefetch_status);
-        bytes = GPMC_PREFETCH_STATUS_FIFO_CNT(bytes);
+        bytes = PREFETCH_STATUS_FIFO_CNT(bytes);
        bytes = bytes  & 0xFFFC; /* io in multiple of 4 bytes */
        if (info->iomode == OMAP_NAND_IO_WRITE) { /* checks for write io */
                if (this_irq == info->gpmc_irq_count)
@@ -682,7 +689,7 @@ static void omap_write_buf_irq_pref(struct mtd_info *mtd,
        limit = (loops_per_jiffy *  msecs_to_jiffies(OMAP_NAND_TIMEOUT_MS));
        do {
                val = readl(info->reg.gpmc_prefetch_status);
-                val = GPMC_PREFETCH_STATUS_COUNT(val);
+                val = PREFETCH_STATUS_COUNT(val);
                cpu_relax();
        } while (val && (tim++ < limit));
@@ -996,7 +1003,7 @@ static int omap_wait(struct mtd_info *mtd, struct nand_chip *chip)
                cond_resched();
        }
-        status = gpmc_nand_read(info->gpmc_cs, GPMC_NAND_DATA);
+        status = readb(info->reg.gpmc_nand_data);
        return status;
 }
@@ -1029,19 +1036,45 @@ static int omap_dev_ready(struct mtd_info *mtd)
 static void omap3_enable_hwecc_bch(struct mtd_info *mtd, int mode)
 {
        int nerrors;
-        unsigned int dev_width;
+        unsigned int dev_width, nsectors;
        struct omap_nand_info *info = container_of(mtd, struct omap_nand_info,
                                                   mtd);
        struct nand_chip *chip = mtd->priv;
+        u32 val;
        nerrors = (info->nand.ecc.bytes == 13) ? 8 : 4;
        dev_width = (chip->options & NAND_BUSWIDTH_16) ? 1 : 0;
+        nsectors = 1;
        /*
         * Program GPMC to perform correction on one 512-byte sector at a time.
         * Using 4 sectors at a time (i.e. ecc.size = 2048) is also possible and
         * gives a slight (5%) performance gain (but requires additional code).
         */
-        (void)gpmc_enable_hwecc_bch(info->gpmc_cs, mode, dev_width, 1, nerrors);
+        writel(ECC1, info->reg.gpmc_ecc_control);
+        /*
+         * When using BCH, sector size is hardcoded to 512 bytes.
+         * Here we are using wrapping mode 6 both for reading and writing, with:
+         *  size0 = 0  (no additional protected byte in spare area)
+         *  size1 = 32 (skip 32 nibbles = 16 bytes per sector in spare area)
+         */
+        val = (32 << ECCSIZE1_SHIFT) | (0 << ECCSIZE0_SHIFT);
+        writel(val, info->reg.gpmc_ecc_size_config);
+        /* BCH configuration */
+        val = ((1                        << 16) | /* enable BCH */
+               (((nerrors == 8) ? 1 : 0) << 12) | /* 8 or 4 bits */
+               (0x06                     <<  8) | /* wrap mode = 6 */
+               (dev_width                <<  7) | /* bus width */
+               (((nsectors-1) & 0x7)     <<  4) | /* number of sectors */
+               (info->gpmc_cs            <<  1) | /* ECC CS */
+               (0x1));                            /* enable ECC */
+        writel(val, info->reg.gpmc_ecc_config);
+        /* clear ecc and enable bits */
+        writel(ECCCLEAR | ECC1, info->reg.gpmc_ecc_control);
 }
 /**
@@ -1055,7 +1088,32 @@ static int omap3_calculate_ecc_bch4(struct mtd_info *mtd, const u_char *dat,
 {
        struct omap_nand_info *info = container_of(mtd, struct omap_nand_info,
                                                   mtd);
-        return gpmc_calculate_ecc_bch4(info->gpmc_cs, dat, ecc_code);
+        unsigned long nsectors, val1, val2;
+        int i;
+        nsectors = ((readl(info->reg.gpmc_ecc_config) >> 4) & 0x7) + 1;
+        for (i = 0; i < nsectors; i++) {
+                /* Read hw-computed remainder */
+                val1 = readl(info->reg.gpmc_bch_result0[i]);
+                val2 = readl(info->reg.gpmc_bch_result1[i]);
+                /*
+                 * Add constant polynomial to remainder, in order to get an ecc
+                 * sequence of 0xFFs for a buffer filled with 0xFFs; and
+                 * left-justify the resulting polynomial.
+                 */
+                *ecc_code++ = 0x28 ^ ((val2 >> 12) & 0xFF);
+                *ecc_code++ = 0x13 ^ ((val2 >>  4) & 0xFF);
+                *ecc_code++ = 0xcc ^ (((val2 & 0xF) << 4)|((val1 >> 28) & 0xF));
+                *ecc_code++ = 0x39 ^ ((val1 >> 20) & 0xFF);
+                *ecc_code++ = 0x96 ^ ((val1 >> 12) & 0xFF);
+                *ecc_code++ = 0xac ^ ((val1 >> 4) & 0xFF);
+                *ecc_code++ = 0x7f ^ ((val1 & 0xF) << 4);
+        }
+        return 0;
 }
 /**
@@ -1069,7 +1127,39 @@ static int omap3_calculate_ecc_bch8(struct mtd_info *mtd, const u_char *dat,
 {
        struct omap_nand_info *info = container_of(mtd, struct omap_nand_info,
                                                   mtd);
-        return gpmc_calculate_ecc_bch8(info->gpmc_cs, dat, ecc_code);
+        unsigned long nsectors, val1, val2, val3, val4;
+        int i;
+        nsectors = ((readl(info->reg.gpmc_ecc_config) >> 4) & 0x7) + 1;
+        for (i = 0; i < nsectors; i++) {
+                /* Read hw-computed remainder */
+                val1 = readl(info->reg.gpmc_bch_result0[i]);
+                val2 = readl(info->reg.gpmc_bch_result1[i]);
+                val3 = readl(info->reg.gpmc_bch_result2[i]);
+                val4 = readl(info->reg.gpmc_bch_result3[i]);
+                /*
+                 * Add constant polynomial to remainder, in order to get an ecc
+                 * sequence of 0xFFs for a buffer filled with 0xFFs.
+                 */
+                *ecc_code++ = 0xef ^ (val4 & 0xFF);
+                *ecc_code++ = 0x51 ^ ((val3 >> 24) & 0xFF);
+                *ecc_code++ = 0x2e ^ ((val3 >> 16) & 0xFF);
+                *ecc_code++ = 0x09 ^ ((val3 >> 8) & 0xFF);
+                *ecc_code++ = 0xed ^ (val3 & 0xFF);
+                *ecc_code++ = 0x93 ^ ((val2 >> 24) & 0xFF);
+                *ecc_code++ = 0x9a ^ ((val2 >> 16) & 0xFF);
+                *ecc_code++ = 0xc2 ^ ((val2 >> 8) & 0xFF);
+                *ecc_code++ = 0x97 ^ (val2 & 0xFF);
+                *ecc_code++ = 0x79 ^ ((val1 >> 24) & 0xFF);
+                *ecc_code++ = 0xe5 ^ ((val1 >> 16) & 0xFF);
+                *ecc_code++ = 0x24 ^ ((val1 >> 8) & 0xFF);
+                *ecc_code++ = 0xb5 ^ (val1 & 0xFF);
+        }
+        return 0;
 }
 /**
@@ -1125,7 +1215,7 @@ static void omap3_free_bch(struct mtd_info *mtd)
 */
 static int omap3_init_bch(struct mtd_info *mtd, int ecc_opt)
 {
-        int ret, max_errors;
+        int max_errors;
        struct omap_nand_info *info = container_of(mtd, struct omap_nand_info,
                                                   mtd);
 #ifdef CONFIG_MTD_NAND_OMAP_BCH8
@@ -1142,11 +1232,6 @@ static int omap3_init_bch(struct mtd_info *mtd, int ecc_opt)
                goto fail;
        }
-        /* initialize GPMC BCH engine */
-        ret = gpmc_init_hwecc_bch(info->gpmc_cs, 1, max_errors);
-        if (ret)
-                goto fail;
        /* software bch library is only used to detect and locate errors */
        info->bch = init_bch(13, max_errors, 0x201b /* hw polynomial */);
        if (!info->bch)
@@ -1513,7 +1598,7 @@ static int omap_nand_remove(struct platform_device *pdev)
        /* Release NAND device, its internal structures and partitions */
        nand_release(&info->mtd);
        iounmap(info->nand.IO_ADDR_R);
-        release_mem_region(info->phys_base, NAND_IO_SIZE);
+        release_mem_region(info->phys_base, info->mem_size);
        kfree(info);
        return 0;
 }
diff --git a/drivers/mtd/onenand/omap2.c b/drivers/mtd/onenand/omap2.c
index 1961be985171..53069aef1f48 100644
--- a/drivers/mtd/onenand/omap2.c
+++ b/drivers/mtd/onenand/omap2.c
@@ -38,12 +38,10 @@
 #include <linux/regulator/consumer.h>
 #include <asm/mach/flash.h>
-#include <plat/gpmc.h>
 #include <linux/platform_data/mtd-onenand-omap2.h>
 #include <asm/gpio.h>
-#include <plat/dma.h>
+#include <plat-omap/dma-omap.h>
-#include <plat/cpu.h>
 #define DRIVER_NAME "omap2-onenand"
@@ -63,6 +61,7 @@ struct omap2_onenand {
        int freq;
        int (*setup)(void __iomem *base, int *freq_ptr);
        struct regulator *regulator;
+        u8 flags;
 };
 static void omap2_onenand_dma_cb(int lch, u16 ch_status, void *data)
@@ -155,7 +154,7 @@ static int omap2_onenand_wait(struct mtd_info *mtd, int state)
                if (!(syscfg & ONENAND_SYS_CFG1_IOBE)) {
                        syscfg |= ONENAND_SYS_CFG1_IOBE;
                        write_reg(c, syscfg, ONENAND_REG_SYS_CFG1);
-                        if (cpu_is_omap34xx())
+                        if (c->flags & ONENAND_IN_OMAP34XX)
                                /* Add a delay to let GPIO settle */
                                syscfg = read_reg(c, ONENAND_REG_SYS_CFG1);
                }
@@ -639,6 +638,7 @@ static int __devinit omap2_onenand_probe(struct platform_device *pdev)
        init_completion(&c->irq_done);
        init_completion(&c->dma_done);
+        c->flags = pdata->flags;
        c->gpmc_cs = pdata->cs;
        c->gpio_irq = pdata->gpio_irq;
        c->dma_channel = pdata->dma_channel;
@@ -729,7 +729,7 @@ static int __devinit omap2_onenand_probe(struct platform_device *pdev)
        this = &c->onenand;
        if (c->dma_channel >= 0) {
                this->wait = omap2_onenand_wait;
-                if (cpu_is_omap34xx()) {
+                if (c->flags & ONENAND_IN_OMAP34XX) {
                        this->read_bufferram = omap3_onenand_read_bufferram;
                        this->write_bufferram = omap3_onenand_write_bufferram;
                } else {
@@ -803,7 +803,6 @@ static int __devexit omap2_onenand_remove(struct platform_device *pdev)
        }
        iounmap(c->onenand.base);
        release_mem_region(c->phys_base, c->mem_size);
-        gpmc_cs_free(c->gpmc_cs);
        kfree(c);
        return 0;
diff --git a/drivers/pcmcia/omap_cf.c b/drivers/pcmcia/omap_cf.c
index fa74efe82206..25c4b1993b3d 100644
--- a/drivers/pcmcia/omap_cf.c
+++ b/drivers/pcmcia/omap_cf.c
@@ -25,7 +25,7 @@
 #include <asm/sizes.h>
 #include <mach/mux.h>
-#include <plat/tc.h>
+#include <mach/tc.h>
 /* NOTE:  don't expect this to support many I/O cards.  The 16xx chips have
diff --git a/drivers/staging/tidspbridge/include/dspbridge/host_os.h b/drivers/staging/tidspbridge/include/dspbridge/host_os.h
index ed00d3da3205..896f1579d5d7 100644
--- a/drivers/staging/tidspbridge/include/dspbridge/host_os.h
+++ b/drivers/staging/tidspbridge/include/dspbridge/host_os.h
@@ -40,7 +40,6 @@
 #include <linux/vmalloc.h>
 #include <linux/ioport.h>
 #include <linux/platform_device.h>
-#include <plat/clock.h>
 #include <linux/clk.h>
 #include <plat/mailbox.h>
 #include <linux/pagemap.h>
diff --git a/drivers/usb/gadget/omap_udc.c b/drivers/usb/gadget/omap_udc.c
index 2a4749c3eb3f..23afa06b65a4 100644
--- a/drivers/usb/gadget/omap_udc.c
+++ b/drivers/usb/gadget/omap_udc.c
@@ -44,7 +44,7 @@
 #include <asm/unaligned.h>
 #include <asm/mach-types.h>
-#include <plat/dma.h>
+#include <plat-omap/dma-omap.h>
 #include <mach/usb.h>
@@ -61,6 +61,8 @@
 #define DRIVER_DESC     "OMAP UDC driver"
 #define DRIVER_VERSION  "4 October 2004"
+#define OMAP_DMA_USB_W2FC_TX0           29
 /*
 * The OMAP UDC needs _very_ early endpoint setup:  before enabling the
 * D+ pullup to allow enumeration.  That's too early for the gadget
diff --git a/drivers/usb/host/ohci-omap.c b/drivers/usb/host/ohci-omap.c
index 4531d03503c3..439e6e4f2d6b 100644
--- a/drivers/usb/host/ohci-omap.c
+++ b/drivers/usb/host/ohci-omap.c
@@ -25,7 +25,6 @@
 #include <asm/mach-types.h>
 #include <mach/mux.h>
-#include <plat/fpga.h>
 #include <mach/hardware.h>
 #include <mach/irqs.h>
@@ -93,14 +92,14 @@ static int omap_ohci_transceiver_power(int on)
 {
        if (on) {
                if (machine_is_omap_innovator() && cpu_is_omap1510())
-                        fpga_write(fpga_read(INNOVATOR_FPGA_CAM_USB_CONTROL)
+                        __raw_writeb(__raw_readb(INNOVATOR_FPGA_CAM_USB_CONTROL)
                                | ((1 << 5/*usb1*/) | (1 << 3/*usb2*/)),
                               INNOVATOR_FPGA_CAM_USB_CONTROL);
                else if (machine_is_omap_osk())
                        tps65010_set_gpio_out_value(GPIO1, LOW);
        } else {
                if (machine_is_omap_innovator() && cpu_is_omap1510())
-                        fpga_write(fpga_read(INNOVATOR_FPGA_CAM_USB_CONTROL)
+                        __raw_writeb(__raw_readb(INNOVATOR_FPGA_CAM_USB_CONTROL)
                                & ~((1 << 5/*usb1*/) | (1 << 3/*usb2*/)),
                               INNOVATOR_FPGA_CAM_USB_CONTROL);
                else if (machine_is_omap_osk())
diff --git a/drivers/usb/musb/tusb6010_omap.c b/drivers/usb/musb/tusb6010_omap.c
index 7a62b95dac24..bfca114f7c56 100644
--- a/drivers/usb/musb/tusb6010_omap.c
+++ b/drivers/usb/musb/tusb6010_omap.c
@@ -16,7 +16,7 @@
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
 #include <linux/slab.h>
-#include <plat/dma.h>
+#include <plat-omap/dma-omap.h>
 #include "musb_core.h"
 #include "tusb6010.h"
@@ -25,6 +25,13 @@
 #define MAX_DMAREQ              5       /* REVISIT: Really 6, but req5 not OK */
+#define OMAP24XX_DMA_EXT_DMAREQ0        2
+#define OMAP24XX_DMA_EXT_DMAREQ1        3
+#define OMAP242X_DMA_EXT_DMAREQ2        14
+#define OMAP242X_DMA_EXT_DMAREQ3        15
+#define OMAP242X_DMA_EXT_DMAREQ4        16
+#define OMAP242X_DMA_EXT_DMAREQ5        64
 struct tusb_omap_dma_ch {
        struct musb             *musb;
        void __iomem            *tbase;
diff --git a/drivers/video/omap/lcd_inn1510.c b/drivers/video/omap/lcd_inn1510.c
index b38b1dd15ce3..2ee423279e35 100644
--- a/drivers/video/omap/lcd_inn1510.c
+++ b/drivers/video/omap/lcd_inn1510.c
@@ -23,7 +23,8 @@
 #include <linux/platform_device.h>
 #include <linux/io.h>
-#include <plat/fpga.h>
+#include <mach/hardware.h>
 #include "omapfb.h"
 static int innovator1510_panel_init(struct lcd_panel *panel,
@@ -38,13 +39,13 @@ static void innovator1510_panel_cleanup(struct lcd_panel *panel)
 static int innovator1510_panel_enable(struct lcd_panel *panel)
 {
-        fpga_write(0x7, OMAP1510_FPGA_LCD_PANEL_CONTROL);
+        __raw_writeb(0x7, OMAP1510_FPGA_LCD_PANEL_CONTROL);
        return 0;
 }
 static void innovator1510_panel_disable(struct lcd_panel *panel)
 {
-        fpga_write(0x0, OMAP1510_FPGA_LCD_PANEL_CONTROL);
+        __raw_writeb(0x0, OMAP1510_FPGA_LCD_PANEL_CONTROL);
 }
 static unsigned long innovator1510_panel_get_caps(struct lcd_panel *panel)
diff --git a/drivers/video/omap/lcdc.c b/drivers/video/omap/lcdc.c
index 7767338f8b14..c39d6e46f8c5 100644
--- a/drivers/video/omap/lcdc.c
+++ b/drivers/video/omap/lcdc.c
@@ -31,7 +31,7 @@
 #include <linux/gfp.h>
 #include <mach/lcdc.h>
-#include <plat/dma.h>
+#include <plat-omap/dma-omap.h>
 #include <asm/mach-types.h>
diff --git a/drivers/video/omap/omapfb_main.c b/drivers/video/omap/omapfb_main.c
index 4351c438b76f..1b5ee8ec192a 100644
--- a/drivers/video/omap/omapfb_main.c
+++ b/drivers/video/omap/omapfb_main.c
@@ -30,7 +30,7 @@
 #include <linux/uaccess.h>
 #include <linux/module.h>
-#include <plat/dma.h>
+#include <plat-omap/dma-omap.h>
 #include "omapfb.h"
 #include "lcdc.h"
diff --git a/drivers/video/omap/sossi.c b/drivers/video/omap/sossi.c
index f79c137753d7..c510a4457398 100644
--- a/drivers/video/omap/sossi.c
+++ b/drivers/video/omap/sossi.c
@@ -25,7 +25,7 @@
 #include <linux/io.h>
 #include <linux/interrupt.h>
-#include <plat/dma.h>
+#include <plat-omap/dma-omap.h>
 #include "omapfb.h"
 #include "lcdc.h"
diff --git a/drivers/video/omap2/dss/core.c b/drivers/video/omap2/dss/core.c
index b2af72dc20bd..d94ef9e31a35 100644
--- a/drivers/video/omap2/dss/core.c
+++ b/drivers/video/omap2/dss/core.c
@@ -237,7 +237,7 @@ static int __init omap_dss_probe(struct platform_device *pdev)
        core.pdev = pdev;
-        dss_features_init();
+        dss_features_init(pdata->version);
        dss_apply_init();
diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c
index b43477a5fae8..a5ab354f267a 100644
--- a/drivers/video/omap2/dss/dispc.c
+++ b/drivers/video/omap2/dss/dispc.c
@@ -37,8 +37,6 @@
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
-#include <plat/cpu.h>
 #include <video/omapdss.h>
 #include "dss.h"
@@ -4042,29 +4040,44 @@ static const struct dispc_features omap44xx_dispc_feats __initconst = {
        .gfx_fifo_workaround    =       true,
 };
-static int __init dispc_init_features(struct device *dev)
+static int __init dispc_init_features(struct platform_device *pdev)
 {
+        struct omap_dss_board_info *pdata = pdev->dev.platform_data;
        const struct dispc_features *src;
        struct dispc_features *dst;
-        dst = devm_kzalloc(dev, sizeof(*dst), GFP_KERNEL);
+        dst = devm_kzalloc(&pdev->dev, sizeof(*dst), GFP_KERNEL);
        if (!dst) {
-                dev_err(dev, "Failed to allocate DISPC Features\n");
+                dev_err(&pdev->dev, "Failed to allocate DISPC Features\n");
                return -ENOMEM;
        }
-        if (cpu_is_omap24xx()) {
+        switch (pdata->version) {
+        case OMAPDSS_VER_OMAP24xx:
                src = &omap24xx_dispc_feats;
-        } else if (cpu_is_omap34xx()) {
+                break;
-                if (omap_rev() < OMAP3430_REV_ES3_0)
-                        src = &omap34xx_rev1_0_dispc_feats;
+        case OMAPDSS_VER_OMAP34xx_ES1:
-                else
+                src = &omap34xx_rev1_0_dispc_feats;
-                        src = &omap34xx_rev3_0_dispc_feats;
+                break;
-        } else if (cpu_is_omap44xx()) {
+        case OMAPDSS_VER_OMAP34xx_ES3:
+        case OMAPDSS_VER_OMAP3630:
+        case OMAPDSS_VER_AM35xx:
+                src = &omap34xx_rev3_0_dispc_feats;
+                break;
+        case OMAPDSS_VER_OMAP4430_ES1:
+        case OMAPDSS_VER_OMAP4430_ES2:
+        case OMAPDSS_VER_OMAP4:
                src = &omap44xx_dispc_feats;
-        } else if (soc_is_omap54xx()) {
+                break;
+        case OMAPDSS_VER_OMAP5:
                src = &omap44xx_dispc_feats;
-        } else {
+                break;
+        default:
                return -ENODEV;
        }
@@ -4084,7 +4097,7 @@ static int __init omap_dispchw_probe(struct platform_device *pdev)
        dispc.pdev = pdev;
-        r = dispc_init_features(&dispc.pdev->dev);
+        r = dispc_init_features(dispc.pdev);
        if (r)
                return r;
diff --git a/drivers/video/omap2/dss/dss.c b/drivers/video/omap2/dss/dss.c
index 2ab1c3e96553..363852a0f764 100644
--- a/drivers/video/omap2/dss/dss.c
+++ b/drivers/video/omap2/dss/dss.c
@@ -35,8 +35,6 @@
 #include <video/omapdss.h>
-#include <plat/cpu.h>
 #include "dss.h"
 #include "dss_features.h"
@@ -792,29 +790,46 @@ static const struct dss_features omap54xx_dss_feats __initconst = {
        .dpi_select_source      =       &dss_dpi_select_source_omap5,
 };
-static int __init dss_init_features(struct device *dev)
+static int __init dss_init_features(struct platform_device *pdev)
 {
+        struct omap_dss_board_info *pdata = pdev->dev.platform_data;
        const struct dss_features *src;
        struct dss_features *dst;
-        dst = devm_kzalloc(dev, sizeof(*dst), GFP_KERNEL);
+        dst = devm_kzalloc(&pdev->dev, sizeof(*dst), GFP_KERNEL);
        if (!dst) {
-                dev_err(dev, "Failed to allocate local DSS Features\n");
+                dev_err(&pdev->dev, "Failed to allocate local DSS Features\n");
                return -ENOMEM;
        }
-        if (cpu_is_omap24xx())
+        switch (pdata->version) {
+        case OMAPDSS_VER_OMAP24xx:
                src = &omap24xx_dss_feats;
-        else if (cpu_is_omap34xx())
+                break;
+        case OMAPDSS_VER_OMAP34xx_ES1:
+        case OMAPDSS_VER_OMAP34xx_ES3:
+        case OMAPDSS_VER_AM35xx:
                src = &omap34xx_dss_feats;
-        else if (cpu_is_omap3630())
+                break;
+        case OMAPDSS_VER_OMAP3630:
                src = &omap3630_dss_feats;
-        else if (cpu_is_omap44xx())
+                break;
+        case OMAPDSS_VER_OMAP4430_ES1:
+        case OMAPDSS_VER_OMAP4430_ES2:
+        case OMAPDSS_VER_OMAP4:
                src = &omap44xx_dss_feats;
-        else if (soc_is_omap54xx())
+                break;
+        case OMAPDSS_VER_OMAP5:
                src = &omap54xx_dss_feats;
-        else
+                break;
+        default:
                return -ENODEV;
+        }
        memcpy(dst, src, sizeof(*dst));
        dss.feat = dst;
@@ -831,7 +846,7 @@ static int __init omap_dsshw_probe(struct platform_device *pdev)
        dss.pdev = pdev;
-        r = dss_init_features(&dss.pdev->dev);
+        r = dss_init_features(dss.pdev);
        if (r)
                return r;
diff --git a/drivers/video/omap2/dss/dss_features.c b/drivers/video/omap2/dss/dss_features.c
index acbc1e1efba3..3e8287c8709d 100644
--- a/drivers/video/omap2/dss/dss_features.c
+++ b/drivers/video/omap2/dss/dss_features.c
@@ -23,7 +23,6 @@
 #include <linux/slab.h>
 #include <video/omapdss.h>
-#include <plat/cpu.h>
 #include "dss.h"
 #include "dss_features.h"
@@ -825,10 +824,20 @@ static const struct ti_hdmi_ip_ops omap4_hdmi_functions = {
 };
-void dss_init_hdmi_ip_ops(struct hdmi_ip_data *ip_data)
+void dss_init_hdmi_ip_ops(struct hdmi_ip_data *ip_data,
+                enum omapdss_version version)
 {
-        if (cpu_is_omap44xx())
+        switch (version) {
+        case OMAPDSS_VER_OMAP4430_ES1:
+        case OMAPDSS_VER_OMAP4430_ES2:
+        case OMAPDSS_VER_OMAP4:
                ip_data->ops = &omap4_hdmi_functions;
+                break;
+        default:
+                ip_data->ops = NULL;
+        }
+        WARN_ON(ip_data->ops == NULL);
 }
 #endif
@@ -929,29 +938,44 @@ bool dss_feat_rotation_type_supported(enum omap_dss_rotation_type rot_type)
        return omap_current_dss_features->supported_rotation_types & rot_type;
 }
-void dss_features_init(void)
+void dss_features_init(enum omapdss_version version)
 {
-        if (cpu_is_omap24xx())
+        switch (version) {
+        case OMAPDSS_VER_OMAP24xx:
                omap_current_dss_features = &omap2_dss_features;
-        else if (cpu_is_omap3630())
+                break;
+        case OMAPDSS_VER_OMAP34xx_ES1:
+        case OMAPDSS_VER_OMAP34xx_ES3:
+                omap_current_dss_features = &omap3430_dss_features;
+                break;
+        case OMAPDSS_VER_OMAP3630:
                omap_current_dss_features = &omap3630_dss_features;
-        else if (cpu_is_omap34xx()) {
+                break;
-                if (soc_is_am35xx()) {
-                        omap_current_dss_features = &am35xx_dss_features;
+        case OMAPDSS_VER_OMAP4430_ES1:
-                } else {
-                        omap_current_dss_features = &omap3430_dss_features;
-                }
-        }
-        else if (omap_rev() == OMAP4430_REV_ES1_0)
                omap_current_dss_features = &omap4430_es1_0_dss_features;
-        else if (omap_rev() == OMAP4430_REV_ES2_0 ||
+                break;
-                omap_rev() == OMAP4430_REV_ES2_1 ||
-                omap_rev() == OMAP4430_REV_ES2_2)
+        case OMAPDSS_VER_OMAP4430_ES2:
                omap_current_dss_features = &omap4430_es2_0_1_2_dss_features;
-        else if (cpu_is_omap44xx())
+                break;
+        case OMAPDSS_VER_OMAP4:
                omap_current_dss_features = &omap4_dss_features;
-        else if (soc_is_omap54xx())
+                break;
+        case OMAPDSS_VER_OMAP5:
                omap_current_dss_features = &omap5_dss_features;
-        else
+                break;
+        case OMAPDSS_VER_AM35xx:
+                omap_current_dss_features = &am35xx_dss_features;
+                break;
+        default:
                DSSWARN("Unsupported OMAP version");
+                break;
+        }
 }
diff --git a/drivers/video/omap2/dss/dss_features.h b/drivers/video/omap2/dss/dss_features.h
index 9218113b5e88..fc492ef72a51 100644
--- a/drivers/video/omap2/dss/dss_features.h
+++ b/drivers/video/omap2/dss/dss_features.h
@@ -123,8 +123,9 @@ bool dss_feat_rotation_type_supported(enum omap_dss_rotation_type rot_type);
 bool dss_has_feature(enum dss_feat_id id);
 void dss_feat_get_reg_field(enum dss_feat_reg_field id, u8 *start, u8 *end);
-void dss_features_init(void);
+void dss_features_init(enum omapdss_version version);
 #if defined(CONFIG_OMAP4_DSS_HDMI)
-void dss_init_hdmi_ip_ops(struct hdmi_ip_data *ip_data);
+void dss_init_hdmi_ip_ops(struct hdmi_ip_data *ip_data,
+                enum omapdss_version version);
 #endif
 #endif
diff --git a/drivers/video/omap2/dss/hdmi.c b/drivers/video/omap2/dss/hdmi.c
index a48a7dd75b33..adcc906d12f8 100644
--- a/drivers/video/omap2/dss/hdmi.c
+++ b/drivers/video/omap2/dss/hdmi.c
@@ -323,6 +323,7 @@ static void hdmi_runtime_put(void)
 static int __init hdmi_init_display(struct omap_dss_device *dssdev)
 {
+        struct omap_dss_board_info *pdata = hdmi.pdev->dev.platform_data;
        int r;
        struct gpio gpios[] = {
@@ -333,7 +334,7 @@ static int __init hdmi_init_display(struct omap_dss_device *dssdev)
        DSSDBG("init_display\n");
-        dss_init_hdmi_ip_ops(&hdmi.ip_data);
+        dss_init_hdmi_ip_ops(&hdmi.ip_data, pdata->version);
        if (hdmi.vdda_hdmi_dac_reg == NULL) {
                struct regulator *reg;
diff --git a/drivers/video/omap2/omapfb/omapfb-ioctl.c b/drivers/video/omap2/omapfb/omapfb-ioctl.c
index 606b89f12351..55a39be694a5 100644
--- a/drivers/video/omap2/omapfb/omapfb-ioctl.c
+++ b/drivers/video/omap2/omapfb/omapfb-ioctl.c
@@ -30,7 +30,7 @@
 #include <linux/export.h>
 #include <video/omapdss.h>
-#include <plat/vrfb.h>
+#include <video/omapvrfb.h>
 #include <plat/vram.h>
 #include "omapfb.h"
diff --git a/drivers/video/omap2/omapfb/omapfb-main.c b/drivers/video/omap2/omapfb/omapfb-main.c
index 16db1589bd91..bc225e46fdd2 100644
--- a/drivers/video/omap2/omapfb/omapfb-main.c
+++ b/drivers/video/omap2/omapfb/omapfb-main.c
@@ -31,9 +31,8 @@
 #include <linux/omapfb.h>
 #include <video/omapdss.h>
-#include <plat/cpu.h>
 #include <plat/vram.h>
-#include <plat/vrfb.h>
+#include <video/omapvrfb.h>
 #include "omapfb.h"
@@ -2396,10 +2395,7 @@ static int __init omapfb_probe(struct platform_device *pdev)
                goto err0;
        }
-        /* TODO : Replace cpu check with omap_has_vrfb once HAS_FEATURE
+        if (def_vrfb && !omap_vrfb_supported()) {
-        *        available for OMAP2 and OMAP3
-        */
-        if (def_vrfb && !cpu_is_omap24xx() && !cpu_is_omap34xx()) {
                def_vrfb = 0;
                dev_warn(&pdev->dev, "VRFB is not supported on this hardware, "
                                "ignoring the module parameter vrfb=y\n");
diff --git a/drivers/video/omap2/omapfb/omapfb-sysfs.c b/drivers/video/omap2/omapfb/omapfb-sysfs.c
index e8d8cc76a435..17aa174e187c 100644
--- a/drivers/video/omap2/omapfb/omapfb-sysfs.c
+++ b/drivers/video/omap2/omapfb/omapfb-sysfs.c
@@ -30,7 +30,7 @@
 #include <linux/omapfb.h>
 #include <video/omapdss.h>
-#include <plat/vrfb.h>
+#include <video/omapvrfb.h>
 #include "omapfb.h"
diff --git a/drivers/video/omap2/vrfb.c b/drivers/video/omap2/vrfb.c
index 7e990220ad2a..5d8fdac3b800 100644
--- a/drivers/video/omap2/vrfb.c
+++ b/drivers/video/omap2/vrfb.c
@@ -26,9 +26,9 @@
 #include <linux/io.h>
 #include <linux/bitops.h>
 #include <linux/mutex.h>
+#include <linux/platform_device.h>
-#include <plat/vrfb.h>
+#include <video/omapvrfb.h>
-#include <plat/sdrc.h>
 #ifdef DEBUG
 #define DBG(format, ...) pr_debug("VRFB: " format, ## __VA_ARGS__)
@@ -36,10 +36,10 @@
 #define DBG(format, ...)
 #endif
-#define SMS_ROT_VIRT_BASE(context, rot) \
+#define SMS_ROT_CONTROL(context)        (0x0 + 0x10 * context)
-        (((context >= 4) ? 0xD0000000 : 0x70000000) \
+#define SMS_ROT_SIZE(context)           (0x4 + 0x10 * context)
-         + (0x4000000 * (context)) \
+#define SMS_ROT_PHYSICAL_BA(context)    (0x8 + 0x10 * context)
-         + (0x1000000 * (rot)))
+#define SMS_ROT_VIRT_BASE(rot)          (0x1000000 * (rot))
 #define OMAP_VRFB_SIZE                  (2048 * 2048 * 4)
@@ -53,10 +53,16 @@
 #define SMS_PW_OFFSET           4
 #define SMS_PS_OFFSET           0
-#define VRFB_NUM_CTXS 12
 /* bitmap of reserved contexts */
 static unsigned long ctx_map;
+struct vrfb_ctx {
+        u32 base;
+        u32 physical_ba;
+        u32 control;
+        u32 size;
+};
 static DEFINE_MUTEX(ctx_lock);
 /*
@@ -65,17 +71,34 @@ static DEFINE_MUTEX(ctx_lock);
 * we don't need locking, since no drivers will run until after the wake-up
 * has finished.
 */
-static struct {
-        u32 physical_ba;
+static void __iomem *vrfb_base;
-        u32 control;
-        u32 size;
+static int num_ctxs;
-} vrfb_hw_context[VRFB_NUM_CTXS];
+static struct vrfb_ctx *ctxs;
+static bool vrfb_loaded;
+static void omap2_sms_write_rot_control(u32 val, unsigned ctx)
+{
+        __raw_writel(val, vrfb_base + SMS_ROT_CONTROL(ctx));
+}
+static void omap2_sms_write_rot_size(u32 val, unsigned ctx)
+{
+        __raw_writel(val, vrfb_base + SMS_ROT_SIZE(ctx));
+}
+static void omap2_sms_write_rot_physical_ba(u32 val, unsigned ctx)
+{
+        __raw_writel(val, vrfb_base + SMS_ROT_PHYSICAL_BA(ctx));
+}
 static inline void restore_hw_context(int ctx)
 {
-        omap2_sms_write_rot_control(vrfb_hw_context[ctx].control, ctx);
+        omap2_sms_write_rot_control(ctxs[ctx].control, ctx);
-        omap2_sms_write_rot_size(vrfb_hw_context[ctx].size, ctx);
+        omap2_sms_write_rot_size(ctxs[ctx].size, ctx);
-        omap2_sms_write_rot_physical_ba(vrfb_hw_context[ctx].physical_ba, ctx);
+        omap2_sms_write_rot_physical_ba(ctxs[ctx].physical_ba, ctx);
 }
 static u32 get_image_width_roundup(u16 width, u8 bytespp)
@@ -196,9 +219,9 @@ void omap_vrfb_setup(struct vrfb *vrfb, unsigned long paddr,
        control |= VRFB_PAGE_WIDTH_EXP  << SMS_PW_OFFSET;
        control |= VRFB_PAGE_HEIGHT_EXP << SMS_PH_OFFSET;
-        vrfb_hw_context[ctx].physical_ba = paddr;
+        ctxs[ctx].physical_ba = paddr;
-        vrfb_hw_context[ctx].size = size;
+        ctxs[ctx].size = size;
-        vrfb_hw_context[ctx].control = control;
+        ctxs[ctx].control = control;
        omap2_sms_write_rot_physical_ba(paddr, ctx);
        omap2_sms_write_rot_size(size, ctx);
@@ -274,11 +297,11 @@ int omap_vrfb_request_ctx(struct vrfb *vrfb)
        mutex_lock(&ctx_lock);
-        for (ctx = 0; ctx < VRFB_NUM_CTXS; ++ctx)
+        for (ctx = 0; ctx < num_ctxs; ++ctx)
                if ((ctx_map & (1 << ctx)) == 0)
                        break;
-        if (ctx == VRFB_NUM_CTXS) {
+        if (ctx == num_ctxs) {
                pr_err("vrfb: no free contexts\n");
                r = -EBUSY;
                goto out;
@@ -293,7 +316,7 @@ int omap_vrfb_request_ctx(struct vrfb *vrfb)
        vrfb->context = ctx;
        for (rot = 0; rot < 4; ++rot) {
-                paddr = SMS_ROT_VIRT_BASE(ctx, rot);
+                paddr = ctxs[ctx].base + SMS_ROT_VIRT_BASE(rot);
                if (!request_mem_region(paddr, OMAP_VRFB_SIZE, "vrfb")) {
                        pr_err("vrfb: failed to reserve VRFB "
                                        "area for ctx %d, rotation %d\n",
@@ -314,3 +337,80 @@ out:
        return r;
 }
 EXPORT_SYMBOL(omap_vrfb_request_ctx);
+bool omap_vrfb_supported(void)
+{
+        return vrfb_loaded;
+}
+EXPORT_SYMBOL(omap_vrfb_supported);
+static int __init vrfb_probe(struct platform_device *pdev)
+{
+        struct resource *mem;
+        int i;
+        /* first resource is the register res, the rest are vrfb contexts */
+        mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+        if (!mem) {
+                dev_err(&pdev->dev, "can't get vrfb base address\n");
+                return -EINVAL;
+        }
+        vrfb_base = devm_request_and_ioremap(&pdev->dev, mem);
+        if (!vrfb_base) {
+                dev_err(&pdev->dev, "can't ioremap vrfb memory\n");
+                return -ENOMEM;
+        }
+        num_ctxs = pdev->num_resources - 1;
+        ctxs = devm_kzalloc(&pdev->dev,
+                        sizeof(struct vrfb_ctx) * num_ctxs,
+                        GFP_KERNEL);
+        if (!ctxs)
+                return -ENOMEM;
+        for (i = 0; i < num_ctxs; ++i) {
+                mem = platform_get_resource(pdev, IORESOURCE_MEM, 1 + i);
+                if (!mem) {
+                        dev_err(&pdev->dev, "can't get vrfb ctx %d address\n",
+                                        i);
+                        return -EINVAL;
+                }
+                ctxs[i].base = mem->start;
+        }
+        vrfb_loaded = true;
+        return 0;
+}
+static void __exit vrfb_remove(struct platform_device *pdev)
+{
+        vrfb_loaded = false;
+}
+static struct platform_driver vrfb_driver = {
+        .driver.name    = "omapvrfb",
+        .remove         = __exit_p(vrfb_remove),
+};
+static int __init vrfb_init(void)
+{
+        return platform_driver_probe(&vrfb_driver, &vrfb_probe);
+}
+static void __exit vrfb_exit(void)
+{
+        platform_driver_unregister(&vrfb_driver);
+}
+module_init(vrfb_init);
+module_exit(vrfb_exit);
+MODULE_AUTHOR("Tomi Valkeinen <tomi.valkeinen@ti.com>");
+MODULE_DESCRIPTION("OMAP VRFB");
+MODULE_LICENSE("GPL v2");
diff --git a/arch/arm/plat-omap/include/plat/led.h b/include/linux/platform_data/leds-omap.h
index 25e451e7e2fd..56c9b2a0ada5 100644
--- a/arch/arm/plat-omap/include/plat/led.h
+++ b/include/linux/platform_data/leds-omap.h
@@ -1,6 +1,4 @@
 /*
- *  arch/arm/plat-omap/include/mach/led.h
- *
 *  Copyright (C) 2006 Samsung Electronics
 *  Kyungmin Park <kyungmin.park@samsung.com>
 *
diff --git a/arch/arm/plat-omap/include/plat/mmc.h b/include/linux/platform_data/mmc-omap.h
index 8b4e4f2da2f5..2bf6ea82ff94 100644
--- a/arch/arm/plat-omap/include/plat/mmc.h
+++ b/include/linux/platform_data/mmc-omap.h
@@ -8,27 +8,6 @@
 * published by the Free Software Foundation.
 */
-#ifndef __OMAP2_MMC_H
-#define __OMAP2_MMC_H
-#include <linux/types.h>
-#include <linux/device.h>
-#include <linux/mmc/host.h>
-#include <plat/omap_hwmod.h>
-#define OMAP15XX_NR_MMC         1
-#define OMAP16XX_NR_MMC         2
-#define OMAP1_MMC_SIZE          0x080
-#define OMAP1_MMC1_BASE         0xfffb7800
-#define OMAP1_MMC2_BASE         0xfffb7c00      /* omap16xx only */
-#define OMAP24XX_NR_MMC         2
-#define OMAP2420_MMC_SIZE       OMAP1_MMC_SIZE
-#define OMAP2_MMC1_BASE         0x4809c000
-#define OMAP4_MMC_REG_OFFSET    0x100
 #define OMAP_MMC_MAX_SLOTS      2
 /*
@@ -50,6 +29,8 @@
 #define OMAP_HSMMC_SUPPORTS_DUAL_VOLT           BIT(0)
 #define OMAP_HSMMC_BROKEN_MULTIBLOCK_READ       BIT(1)
+struct mmc_card;
 struct omap_mmc_dev_attr {
        u8 flags;
 };
@@ -126,6 +107,9 @@ struct omap_mmc_platform_data {
                /* we can put the features above into this variable */
 #define HSMMC_HAS_PBIAS         (1 << 0)
 #define HSMMC_HAS_UPDATED_RESET (1 << 1)
+#define MMC_OMAP7XX             (1 << 2)
+#define MMC_OMAP15XX            (1 << 3)
+#define MMC_OMAP16XX            (1 << 4)
                unsigned features;
                int switch_pin;                 /* gpio (card detect) */
@@ -164,25 +148,3 @@ struct omap_mmc_platform_data {
        } slots[OMAP_MMC_MAX_SLOTS];
 };
-/* called from board-specific card detection service routine */
-extern void omap_mmc_notify_cover_event(struct device *dev, int slot,
-                                        int is_closed);
-#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
-void omap1_init_mmc(struct omap_mmc_platform_data **mmc_data,
-                                int nr_controllers);
-void omap242x_init_mmc(struct omap_mmc_platform_data **mmc_data);
-#else
-static inline void omap1_init_mmc(struct omap_mmc_platform_data **mmc_data,
-                                int nr_controllers)
-{
-}
-static inline void omap242x_init_mmc(struct omap_mmc_platform_data **mmc_data)
-{
-}
-#endif
-extern int omap_msdi_reset(struct omap_hwmod *oh);
-#endif
diff --git a/include/linux/platform_data/mtd-nand-omap2.h b/include/linux/platform_data/mtd-nand-omap2.h
index 1a68c1e5fe53..24d32ca34bef 100644
--- a/include/linux/platform_data/mtd-nand-omap2.h
+++ b/include/linux/platform_data/mtd-nand-omap2.h
@@ -8,9 +8,13 @@
 * published by the Free Software Foundation.
 */
-#include <plat/gpmc.h>
+#ifndef _MTD_NAND_OMAP2_H
+#define _MTD_NAND_OMAP2_H
 #include <linux/mtd/partitions.h>
+#define GPMC_BCH_NUM_REMAINDER  8
 enum nand_io {
        NAND_OMAP_PREFETCH_POLLED = 0,  /* prefetch polled mode, default */
        NAND_OMAP_POLLED,               /* polled mode, without prefetch */
@@ -18,10 +22,38 @@ enum nand_io {
        NAND_OMAP_PREFETCH_IRQ          /* prefetch enabled irq mode */
 };
+enum omap_ecc {
+                /* 1-bit ecc: stored at end of spare area */
+        OMAP_ECC_HAMMING_CODE_DEFAULT = 0, /* Default, s/w method */
+        OMAP_ECC_HAMMING_CODE_HW, /* gpmc to detect the error */
+                /* 1-bit ecc: stored at beginning of spare area as romcode */
+        OMAP_ECC_HAMMING_CODE_HW_ROMCODE, /* gpmc method & romcode layout */
+        OMAP_ECC_BCH4_CODE_HW, /* 4-bit BCH ecc code */
+        OMAP_ECC_BCH8_CODE_HW, /* 8-bit BCH ecc code */
+};
+struct gpmc_nand_regs {
+        void __iomem    *gpmc_status;
+        void __iomem    *gpmc_nand_command;
+        void __iomem    *gpmc_nand_address;
+        void __iomem    *gpmc_nand_data;
+        void __iomem    *gpmc_prefetch_config1;
+        void __iomem    *gpmc_prefetch_config2;
+        void __iomem    *gpmc_prefetch_control;
+        void __iomem    *gpmc_prefetch_status;
+        void __iomem    *gpmc_ecc_config;
+        void __iomem    *gpmc_ecc_control;
+        void __iomem    *gpmc_ecc_size_config;
+        void __iomem    *gpmc_ecc1_result;
+        void __iomem    *gpmc_bch_result0[GPMC_BCH_NUM_REMAINDER];
+        void __iomem    *gpmc_bch_result1[GPMC_BCH_NUM_REMAINDER];
+        void __iomem    *gpmc_bch_result2[GPMC_BCH_NUM_REMAINDER];
+        void __iomem    *gpmc_bch_result3[GPMC_BCH_NUM_REMAINDER];
+};
 struct omap_nand_platform_data {
        int                     cs;
        struct mtd_partition    *parts;
-        struct gpmc_timings     *gpmc_t;
        int                     nr_parts;
        bool                    dev_ready;
        enum nand_io            xfer_type;
@@ -30,14 +62,4 @@ struct omap_nand_platform_data {
        struct gpmc_nand_regs   reg;
 };
-/* minimum size for IO mapping */
-#define NAND_IO_SIZE    4
-#if defined(CONFIG_MTD_NAND_OMAP2) || defined(CONFIG_MTD_NAND_OMAP2_MODULE)
-extern int gpmc_nand_init(struct omap_nand_platform_data *d);
-#else
-static inline int gpmc_nand_init(struct omap_nand_platform_data *d)
-{
-        return 0;
-}
 #endif
diff --git a/include/linux/platform_data/mtd-onenand-omap2.h b/include/linux/platform_data/mtd-onenand-omap2.h
index 2858667d2e4f..685af7e8b120 100644
--- a/include/linux/platform_data/mtd-onenand-omap2.h
+++ b/include/linux/platform_data/mtd-onenand-omap2.h
@@ -9,17 +9,15 @@
 * published by the Free Software Foundation.
 */
+#ifndef __MTD_ONENAND_OMAP2_H
+#define __MTD_ONENAND_OMAP2_H
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 #define ONENAND_SYNC_READ       (1 << 0)
 #define ONENAND_SYNC_READWRITE  (1 << 1)
+#define ONENAND_IN_OMAP34XX     (1 << 2)
-struct onenand_freq_info {
-        u16                     maf_id;
-        u16                     dev_id;
-        u16                     ver_id;
-};
 struct omap_onenand_platform_data {
        int                     cs;
@@ -27,27 +25,9 @@ struct omap_onenand_platform_data {
        struct mtd_partition    *parts;
        int                     nr_parts;
        int                     (*onenand_setup)(void __iomem *, int *freq_ptr);
-        int             (*get_freq)(const struct onenand_freq_info *freq_info,
-                                    bool *clk_dep);
        int                     dma_channel;
        u8                      flags;
        u8                      regulator_can_sleep;
        u8                      skip_initial_unlocking;
 };
-#define ONENAND_MAX_PARTITIONS 8
-#if defined(CONFIG_MTD_ONENAND_OMAP2) || \
-        defined(CONFIG_MTD_ONENAND_OMAP2_MODULE)
-extern void gpmc_onenand_init(struct omap_onenand_platform_data *d);
-#else
-#define board_onenand_data      NULL
-static inline void gpmc_onenand_init(struct omap_onenand_platform_data *d)
-{
-}
 #endif
diff --git a/include/video/omapdss.h b/include/video/omapdss.h
index 3729173b7fbc..88c829466fc1 100644
--- a/include/video/omapdss.h
+++ b/include/video/omapdss.h
@@ -314,6 +314,19 @@ int dsi_vc_send_bta_sync(struct omap_dss_device *dssdev, int channel);
 int dsi_enable_video_output(struct omap_dss_device *dssdev, int channel);
 void dsi_disable_video_output(struct omap_dss_device *dssdev, int channel);
+enum omapdss_version {
+        OMAPDSS_VER_UNKNOWN = 0,
+        OMAPDSS_VER_OMAP24xx,
+        OMAPDSS_VER_OMAP34xx_ES1,       /* OMAP3430 ES1.0, 2.0 */
+        OMAPDSS_VER_OMAP34xx_ES3,       /* OMAP3430 ES3.0+ */
+        OMAPDSS_VER_OMAP3630,
+        OMAPDSS_VER_AM35xx,
+        OMAPDSS_VER_OMAP4430_ES1,       /* OMAP4430 ES1.0 */
+        OMAPDSS_VER_OMAP4430_ES2,       /* OMAP4430 ES2.0, 2.1, 2.2 */
+        OMAPDSS_VER_OMAP4,              /* All other OMAP4s */
+        OMAPDSS_VER_OMAP5,
+};
 /* Board specific data */
 struct omap_dss_board_info {
        int (*get_context_loss_count)(struct device *dev);
@@ -323,6 +336,7 @@ struct omap_dss_board_info {
        int (*dsi_enable_pads)(int dsi_id, unsigned lane_mask);
        void (*dsi_disable_pads)(int dsi_id, unsigned lane_mask);
        int (*set_min_bus_tput)(struct device *dev, unsigned long r);
+        enum omapdss_version version;
 };
 /* Init with the board info */
diff --git a/arch/arm/plat-omap/include/plat/vrfb.h b/include/video/omapvrfb.h
index 3792bdea2f6d..bb0bd89f8bc6 100644
--- a/arch/arm/plat-omap/include/plat/vrfb.h
+++ b/include/video/omapvrfb.h
@@ -36,6 +36,7 @@ struct vrfb {
 };
 #ifdef CONFIG_OMAP2_VRFB
+extern bool omap_vrfb_supported(void);
 extern int omap_vrfb_request_ctx(struct vrfb *vrfb);
 extern void omap_vrfb_release_ctx(struct vrfb *vrfb);
 extern void omap_vrfb_adjust_size(u16 *width, u16 *height,
@@ -49,6 +50,7 @@ extern int omap_vrfb_map_angle(struct vrfb *vrfb, u16 height, u8 rot);
 extern void omap_vrfb_restore_context(void);
 #else
+static inline bool omap_vrfb_supported(void) { return false; }
 static inline int omap_vrfb_request_ctx(struct vrfb *vrfb) { return 0; }
 static inline void omap_vrfb_release_ctx(struct vrfb *vrfb) {}
 static inline void omap_vrfb_adjust_size(u16 *width, u16 *height,
diff --git a/sound/soc/omap/omap-pcm.c b/sound/soc/omap/omap-pcm.c
index 340874ebf9ae..52977aa30355 100644
--- a/sound/soc/omap/omap-pcm.c
+++ b/sound/soc/omap/omap-pcm.c
@@ -32,9 +32,14 @@
 #include <sound/dmaengine_pcm.h>
 #include <sound/soc.h>
-#include <plat/cpu.h>
 #include "omap-pcm.h"
+#ifdef CONFIG_ARCH_OMAP1
+#define pcm_omap1510()  cpu_is_omap1510()
+#else
+#define pcm_omap1510()  0
+#endif
 static const struct snd_pcm_hardware omap_pcm_hardware = {
        .info                   = SNDRV_PCM_INFO_MMAP |
                                  SNDRV_PCM_INFO_MMAP_VALID |
@@ -159,7 +164,7 @@ static snd_pcm_uframes_t omap_pcm_pointer(struct snd_pcm_substream *substream)
 {
        snd_pcm_uframes_t offset;
-        if (cpu_is_omap1510())
+        if (pcm_omap1510())
                offset = snd_dmaengine_pcm_pointer_no_residue(substream);
        else
                offset = snd_dmaengine_pcm_pointer(substream);