4 files changed, 718 insertions, 0 deletions

diff --git a/Documentation/dell_rbu.txt b/Documentation/dell_rbu.txt
new file mode 100644
index 000000000000..bcfa5c35036b
--- /dev/null
+++ b/Documentation/dell_rbu.txt
@@ -0,0 +1,74 @@
+Purpose:
+Demonstrate the usage of the new open sourced rbu (Remote BIOS Update) driver
+for updating BIOS images on Dell servers and desktops.
+
+Scope:
+This document discusses the functionality of the rbu driver only.
+It does not cover the support needed from aplications to enable the BIOS to
+update itself with the image downloaded in to the memory.
+
+Overview:
+This driver works with Dell OpenManage or Dell Update Packages for updating
+the BIOS on Dell servers (starting from servers sold since 1999), desktops
+and notebooks (starting from those sold in 2005).
+Please go to  http://support.dell.com register and you can find info on
+OpenManage and Dell Update packages (DUP).
+
+Dell_RBU driver supports BIOS update using the monilothic image and packetized
+image methods. In case of moniolithic the driver allocates a contiguous chunk
+of physical pages having the BIOS image. In case of packetized the app
+using the driver breaks the image in to packets of fixed sizes and the driver
+would place each packet in contiguous physical memory. The driver also
+maintains a link list of packets for reading them back.
+If the dell_rbu driver is unloaded all the allocated memory is freed.
+
+The rbu driver needs to have an application which will inform the BIOS to
+enable the update in the next system reboot.
+
+The user should not unload the rbu driver after downloading the BIOS image
+or updating.
+
+The driver load creates the following directories under the /sys file system.
+/sys/class/firmware/dell_rbu/loading
+/sys/class/firmware/dell_rbu/data
+/sys/devices/platform/dell_rbu/image_type
+/sys/devices/platform/dell_rbu/data
+
+The driver supports two types of update mechanism; monolithic and packetized.
+These update mechanism depends upon the BIOS currently running on the system.
+Most of the Dell systems support a monolithic update where the BIOS image is
+copied to a single contiguous block of physical memory.
+In case of packet mechanism the single memory can be broken in smaller chuks
+of contiguous memory and the BIOS image is scattered in these packets.
+
+By default the driver uses monolithic memory for the update type. This can be
+changed to contiguous during the driver load time by specifying the load
+parameter image_type=packet.  This can also be changed later as below
+echo packet > /sys/devices/platform/dell_rbu/image_type
+
+Do the steps below to download the BIOS image.
+1) echo 1 > /sys/class/firmware/dell_rbu/loading
+2) cp bios_image.hdr /sys/class/firmware/dell_rbu/data
+3) echo 0 > /sys/class/firmware/dell_rbu/loading
+
+The /sys/class/firmware/dell_rbu/ entries will remain till the following is
+done.
+echo -1 > /sys/class/firmware/dell_rbu/loading
+
+Until this step is completed the drivr cannot be unloaded.
+
+Also the driver provides /sys/devices/platform/dell_rbu/data readonly file to
+read back the image downloaded. This is useful in case of packet update
+mechanism where the above steps 1,2,3 will repeated for every packet.
+By reading the /sys/devices/platform/dell_rbu/data file all packet data
+downloaded can be verified in a single file.
+The packets are arranged in this file one after the other in a FIFO order.
+
+NOTE:
+This driver requires a patch for firmware_class.c which has the addition
+of request_firmware_nowait_nohotplug function to wortk
+Also after updating the BIOS image an user mdoe application neeeds to execute
+code which message the BIOS update request to the BIOS. So on the next reboot
+the BIOS knows about the new image downloaded and it updates it self.
+Also don't unload the rbu drive if the image has to be updated.
+
diff --git a/drivers/firmware/Kconfig b/drivers/firmware/Kconfig
index 5b29c3b2a331..b9b6e4273f01 100644
--- a/drivers/firmware/Kconfig
+++ b/drivers/firmware/Kconfig
@@ -58,4 +58,13 @@ config EFI_PCDP
 
           See <http://www.dig64.org/specifications/DIG64_HCDPv20_042804.pdf>
 
+config DELL_RBU
+        tristate "BIOS update support for DELL systems via sysfs"
+        select FW_LOADER
+        help
+         Say m if you want to have the option of updating the BIOS for your
+         DELL system. Note you need a Dell OpenManage or Dell Update package (DUP)
+         supporting application to comunicate with the BIOS regarding the new
+         image for the image update to take effect.
+         See <file:Documentation/dell_rbu.txt> for more details on the driver.
 endmenu
diff --git a/drivers/firmware/Makefile b/drivers/firmware/Makefile
index 90fd0b26db8b..186138572980 100644
--- a/drivers/firmware/Makefile
+++ b/drivers/firmware/Makefile
@@ -4,3 +4,4 @@
 obj-$(CONFIG_EDD)               += edd.o
 obj-$(CONFIG_EFI_VARS)          += efivars.o
 obj-$(CONFIG_EFI_PCDP)          += pcdp.o
+obj-$(CONFIG_DELL_RBU)          += dell_rbu.o
diff --git a/drivers/firmware/dell_rbu.c b/drivers/firmware/dell_rbu.c
new file mode 100644
index 000000000000..3b865f34a095
--- /dev/null
+++ b/drivers/firmware/dell_rbu.c
@@ -0,0 +1,634 @@
+/*
+ * dell_rbu.c
+ * Bios Update driver for Dell systems
+ * Author: Dell Inc
+ *         Abhay Salunke <abhay_salunke@dell.com>
+ *
+ * Copyright (C) 2005 Dell Inc.
+ *
+ * Remote BIOS Update (rbu) driver is used for updating DELL BIOS by
+ * creating entries in the /sys file systems on Linux 2.6 and higher
+ * kernels. The driver supports two mechanism to update the BIOS namely
+ * contiguous and packetized. Both these methods still require having some
+ * application to set the CMOS bit indicating the BIOS to update itself
+ * after a reboot.
+ *
+ * Contiguous method:
+ * This driver writes the incoming data in a monolithic image by allocating
+ * contiguous physical pages large enough to accommodate the incoming BIOS
+ * image size.
+ *
+ * Packetized method:
+ * The driver writes the incoming packet image by allocating a new packet
+ * on every time the packet data is written. This driver requires an
+ * application to break the BIOS image in to fixed sized packet chunks.
+ *
+ * See Documentation/dell_rbu.txt for more info.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License v2.0 as published by
+ * the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#include <linux/version.h>
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/blkdev.h>
+#include <linux/device.h>
+#include <linux/spinlock.h>
+#include <linux/moduleparam.h>
+#include <linux/firmware.h>
+#include <linux/dma-mapping.h>
+
+MODULE_AUTHOR("Abhay Salunke <abhay_salunke@dell.com>");
+MODULE_DESCRIPTION("Driver for updating BIOS image on DELL systems");
+MODULE_LICENSE("GPL");
+MODULE_VERSION("1.0");
+
+#define BIOS_SCAN_LIMIT 0xffffffff
+#define MAX_IMAGE_LENGTH 16
+static struct _rbu_data {
+        void *image_update_buffer;
+        unsigned long image_update_buffer_size;
+        unsigned long bios_image_size;
+        int image_update_ordernum;
+        int dma_alloc;
+        spinlock_t lock;
+        unsigned long packet_read_count;
+        unsigned long packet_write_count;
+        unsigned long num_packets;
+        unsigned long packetsize;
+} rbu_data;
+
+static char image_type[MAX_IMAGE_LENGTH] = "mono";
+module_param_string(image_type, image_type, sizeof(image_type), 0);
+MODULE_PARM_DESC(image_type, "BIOS image type. choose- mono or packet");
+
+struct packet_data {
+        struct list_head list;
+        size_t length;
+        void *data;
+        int ordernum;
+};
+
+static struct packet_data packet_data_head;
+
+static struct platform_device *rbu_device;
+static int context;
+static dma_addr_t dell_rbu_dmaaddr;
+
+static void init_packet_head(void)
+{
+        INIT_LIST_HEAD(&packet_data_head.list);
+        rbu_data.packet_write_count = 0;
+        rbu_data.packet_read_count = 0;
+        rbu_data.num_packets = 0;
+        rbu_data.packetsize = 0;
+}
+
+static int fill_last_packet(void *data, size_t length)
+{
+        struct list_head *ptemp_list;
+        struct packet_data *packet = NULL;
+        int packet_count = 0;
+
+        pr_debug("fill_last_packet: entry \n");
+
+        if (!rbu_data.num_packets) {
+                pr_debug("fill_last_packet: num_packets=0\n");
+                return -ENOMEM;
+        }
+
+        packet_count = rbu_data.num_packets;
+
+        ptemp_list = (&packet_data_head.list)->prev;
+
+        packet = list_entry(ptemp_list, struct packet_data, list);
+
+        if ((rbu_data.packet_write_count + length) > rbu_data.packetsize) {
+                pr_debug("dell_rbu:%s: packet size data "
+                         "overrun\n", __FUNCTION__);
+                return -EINVAL;
+        }
+
+        pr_debug("fill_last_packet : buffer = %p\n", packet->data);
+
+        memcpy((packet->data + rbu_data.packet_write_count), data, length);
+
+        if ((rbu_data.packet_write_count + length) == rbu_data.packetsize) {
+                /*
+                 * this was the last data chunk in the packet
+                 * so reinitialize the packet data counter to zero
+                 */
+                rbu_data.packet_write_count = 0;
+        } else
+                rbu_data.packet_write_count += length;
+
+        pr_debug("fill_last_packet: exit \n");
+        return 0;
+}
+
+static int create_packet(size_t length)
+{
+        struct packet_data *newpacket;
+        int ordernum = 0;
+
+        pr_debug("create_packet: entry \n");
+
+        if (!rbu_data.packetsize) {
+                pr_debug("create_packet: packetsize not specified\n");
+                return -EINVAL;
+        }
+
+        newpacket = kmalloc(sizeof(struct packet_data), GFP_KERNEL);
+        if (!newpacket) {
+                printk(KERN_WARNING
+                       "dell_rbu:%s: failed to allocate new "
+                       "packet\n", __FUNCTION__);
+                return -ENOMEM;
+        }
+
+        ordernum = get_order(length);
+        /*
+         * there is no upper limit on memory
+         * address for packetized mechanism
+         */
+        newpacket->data = (unsigned char *)__get_free_pages(GFP_KERNEL,
+                                                            ordernum);
+
+        pr_debug("create_packet: newpacket %p\n", newpacket->data);
+
+        if (!newpacket->data) {
+                printk(KERN_WARNING
+                       "dell_rbu:%s: failed to allocate new "
+                       "packet\n", __FUNCTION__);
+                kfree(newpacket);
+                return -ENOMEM;
+        }
+
+        newpacket->ordernum = ordernum;
+        ++rbu_data.num_packets;
+        /*
+         * initialize the newly created packet headers
+         */
+        INIT_LIST_HEAD(&newpacket->list);
+        list_add_tail(&newpacket->list, &packet_data_head.list);
+        /*
+         * packets have fixed size
+         */
+        newpacket->length = rbu_data.packetsize;
+
+        pr_debug("create_packet: exit \n");
+
+        return 0;
+}
+
+static int packetize_data(void *data, size_t length)
+{
+        int rc = 0;
+
+        if (!rbu_data.packet_write_count) {
+                if ((rc = create_packet(length)))
+                        return rc;
+        }
+        if ((rc = fill_last_packet(data, length)))
+                return rc;
+
+        return rc;
+}
+
+static int
+do_packet_read(char *data, struct list_head *ptemp_list,
+               int length, int bytes_read, int *list_read_count)
+{
+        void *ptemp_buf;
+        struct packet_data *newpacket = NULL;
+        int bytes_copied = 0;
+        int j = 0;
+
+        newpacket = list_entry(ptemp_list, struct packet_data, list);
+        *list_read_count += newpacket->length;
+
+        if (*list_read_count > bytes_read) {
+                /* point to the start of unread data */
+                j = newpacket->length - (*list_read_count - bytes_read);
+                /* point to the offset in the packet buffer */
+                ptemp_buf = (u8 *) newpacket->data + j;
+                /*
+                 * check if there is enough room in
+                 * * the incoming buffer
+                 */
+                if (length > (*list_read_count - bytes_read))
+                        /*
+                         * copy what ever is there in this
+                         * packet and move on
+                         */
+                        bytes_copied = (*list_read_count - bytes_read);
+                else
+                        /* copy the remaining */
+                        bytes_copied = length;
+                memcpy(data, ptemp_buf, bytes_copied);
+        }
+        return bytes_copied;
+}
+
+static int packet_read_list(char *data, size_t * pread_length)
+{
+        struct list_head *ptemp_list;
+        int temp_count = 0;
+        int bytes_copied = 0;
+        int bytes_read = 0;
+        int remaining_bytes = 0;
+        char *pdest = data;
+
+        /* check if we have any packets */
+        if (0 == rbu_data.num_packets)
+                return -ENOMEM;
+
+        remaining_bytes = *pread_length;
+        bytes_read = rbu_data.packet_read_count;
+
+        ptemp_list = (&packet_data_head.list)->next;
+        while (!list_empty(ptemp_list)) {
+                bytes_copied = do_packet_read(pdest, ptemp_list,
+                                              remaining_bytes, bytes_read,
+                                              &temp_count);
+                remaining_bytes -= bytes_copied;
+                bytes_read += bytes_copied;
+                pdest += bytes_copied;
+                /*
+                 * check if we reached end of buffer before reaching the
+                 * last packet
+                 */
+                if (remaining_bytes == 0)
+                        break;
+
+                ptemp_list = ptemp_list->next;
+        }
+        /*finally set the bytes read */
+        *pread_length = bytes_read - rbu_data.packet_read_count;
+        rbu_data.packet_read_count = bytes_read;
+        return 0;
+}
+
+static void packet_empty_list(void)
+{
+        struct list_head *ptemp_list;
+        struct list_head *pnext_list;
+        struct packet_data *newpacket;
+
+        ptemp_list = (&packet_data_head.list)->next;
+        while (!list_empty(ptemp_list)) {
+                newpacket =
+                    list_entry(ptemp_list, struct packet_data, list);
+                pnext_list = ptemp_list->next;
+                list_del(ptemp_list);
+                ptemp_list = pnext_list;
+                /*
+                 * zero out the RBU packet memory before freeing
+                 * to make sure there are no stale RBU packets left in memory
+                 */
+                memset(newpacket->data, 0, rbu_data.packetsize);
+                free_pages((unsigned long)newpacket->data,
+                           newpacket->ordernum);
+                kfree(newpacket);
+        }
+        rbu_data.packet_write_count = 0;
+        rbu_data.packet_read_count = 0;
+        rbu_data.num_packets = 0;
+        rbu_data.packetsize = 0;
+}
+
+/*
+ * img_update_free: Frees the buffer allocated for storing BIOS image
+ * Always called with lock held and returned with lock held
+ */
+static void img_update_free(void)
+{
+        if (!rbu_data.image_update_buffer)
+                return;
+        /*
+         * zero out this buffer before freeing it to get rid of any stale
+         * BIOS image copied in memory.
+         */
+        memset(rbu_data.image_update_buffer, 0,
+               rbu_data.image_update_buffer_size);
+        if (rbu_data.dma_alloc == 1)
+                dma_free_coherent(NULL, rbu_data.bios_image_size,
+                                  rbu_data.image_update_buffer,
+                                  dell_rbu_dmaaddr);
+        else
+                free_pages((unsigned long)rbu_data.image_update_buffer,
+                           rbu_data.image_update_ordernum);
+
+        /*
+         * Re-initialize the rbu_data variables after a free
+         */
+        rbu_data.image_update_ordernum = -1;
+        rbu_data.image_update_buffer = NULL;
+        rbu_data.image_update_buffer_size = 0;
+        rbu_data.bios_image_size = 0;
+        rbu_data.dma_alloc = 0;
+}
+
+/*
+ * img_update_realloc: This function allocates the contiguous pages to
+ * accommodate the requested size of data. The memory address and size
+ * values are stored globally and on every call to this function the new
+ * size is checked to see if more data is required than the existing size.
+ * If true the previous memory is freed and new allocation is done to
+ * accommodate the new size. If the incoming size is less then than the
+ * already allocated size, then that memory is reused. This function is
+ * called with lock held and returns with lock held.
+ */
+static int img_update_realloc(unsigned long size)
+{
+        unsigned char *image_update_buffer = NULL;
+        unsigned long rc;
+        unsigned long img_buf_phys_addr;
+        int ordernum;
+        int dma_alloc = 0;
+
+        /*
+         * check if the buffer of sufficient size has been
+         * already allocated
+         */
+        if (rbu_data.image_update_buffer_size >= size) {
+                /*
+                 * check for corruption
+                 */
+                if ((size != 0) && (rbu_data.image_update_buffer == NULL)) {
+                        printk(KERN_ERR "dell_rbu:%s: corruption "
+                               "check failed\n", __FUNCTION__);
+                        return -EINVAL;
+                }
+                /*
+                 * we have a valid pre-allocated buffer with
+                 * sufficient size
+                 */
+                return 0;
+        }
+
+        /*
+         * free any previously allocated buffer
+         */
+        img_update_free();
+
+        spin_unlock(&rbu_data.lock);
+
+        ordernum = get_order(size);
+        image_update_buffer =
+            (unsigned char *)__get_free_pages(GFP_KERNEL, ordernum);
+
+        img_buf_phys_addr =
+            (unsigned long)virt_to_phys(image_update_buffer);
+
+        if (img_buf_phys_addr > BIOS_SCAN_LIMIT) {
+                free_pages((unsigned long)image_update_buffer, ordernum);
+                ordernum = -1;
+                image_update_buffer = dma_alloc_coherent(NULL, size,
+                                                         &dell_rbu_dmaaddr,
+                                                         GFP_KERNEL);
+                dma_alloc = 1;
+        }
+
+        spin_lock(&rbu_data.lock);
+
+        if (image_update_buffer != NULL) {
+                rbu_data.image_update_buffer = image_update_buffer;
+                rbu_data.image_update_buffer_size = size;
+                rbu_data.bios_image_size =
+                    rbu_data.image_update_buffer_size;
+                rbu_data.image_update_ordernum = ordernum;
+                rbu_data.dma_alloc = dma_alloc;
+                rc = 0;
+        } else {
+                pr_debug("Not enough memory for image update:"
+                         "size = %ld\n", size);
+                rc = -ENOMEM;
+        }
+
+        return rc;
+}
+
+static ssize_t read_packet_data(char *buffer, loff_t pos, size_t count)
+{
+        int retval;
+        size_t bytes_left;
+        size_t data_length;
+        char *ptempBuf = buffer;
+        unsigned long imagesize;
+
+        /* check to see if we have something to return */
+        if (rbu_data.num_packets == 0) {
+                pr_debug("read_packet_data: no packets written\n");
+                retval = -ENOMEM;
+                goto read_rbu_data_exit;
+        }
+
+        imagesize = rbu_data.num_packets * rbu_data.packetsize;
+
+        if (pos > imagesize) {
+                retval = 0;
+                printk(KERN_WARNING "dell_rbu:read_packet_data: "
+                       "data underrun\n");
+                goto read_rbu_data_exit;
+        }
+
+        bytes_left = imagesize - pos;
+        data_length = min(bytes_left, count);
+
+        if ((retval = packet_read_list(ptempBuf, &data_length)) < 0)
+                goto read_rbu_data_exit;
+
+        if ((pos + count) > imagesize) {
+                rbu_data.packet_read_count = 0;
+                /* this was the last copy */
+                retval = bytes_left;
+        } else
+                retval = count;
+
+      read_rbu_data_exit:
+        return retval;
+}
+
+static ssize_t read_rbu_mono_data(char *buffer, loff_t pos, size_t count)
+{
+        unsigned char *ptemp = NULL;
+        size_t bytes_left = 0;
+        size_t data_length = 0;
+        ssize_t ret_count = 0;
+
+        /* check to see if we have something to return */
+        if ((rbu_data.image_update_buffer == NULL) ||
+            (rbu_data.bios_image_size == 0)) {
+                pr_debug("read_rbu_data_mono: image_update_buffer %p ,"
+                         "bios_image_size %lu\n",
+                         rbu_data.image_update_buffer,
+                         rbu_data.bios_image_size);
+                ret_count = -ENOMEM;
+                goto read_rbu_data_exit;
+        }
+
+        if (pos > rbu_data.bios_image_size) {
+                ret_count = 0;
+                goto read_rbu_data_exit;
+        }
+
+        bytes_left = rbu_data.bios_image_size - pos;
+        data_length = min(bytes_left, count);
+
+        ptemp = rbu_data.image_update_buffer;
+        memcpy(buffer, (ptemp + pos), data_length);
+
+        if ((pos + count) > rbu_data.bios_image_size)
+                /* this was the last copy */
+                ret_count = bytes_left;
+        else
+                ret_count = count;
+      read_rbu_data_exit:
+        return ret_count;
+}
+
+static ssize_t
+read_rbu_data(struct kobject *kobj, char *buffer, loff_t pos, size_t count)
+{
+        ssize_t ret_count = 0;
+
+        spin_lock(&rbu_data.lock);
+
+        if (!strcmp(image_type, "mono"))
+                ret_count = read_rbu_mono_data(buffer, pos, count);
+        else if (!strcmp(image_type, "packet"))
+                ret_count = read_packet_data(buffer, pos, count);
+        else
+                pr_debug("read_rbu_data: invalid image type specified\n");
+
+        spin_unlock(&rbu_data.lock);
+        return ret_count;
+}
+
+static ssize_t
+read_rbu_image_type(struct kobject *kobj, char *buffer, loff_t pos,
+                    size_t count)
+{
+        int size = 0;
+        if (!pos)
+                size = sprintf(buffer, "%s\n", image_type);
+        return size;
+}
+
+static ssize_t
+write_rbu_image_type(struct kobject *kobj, char *buffer, loff_t pos,
+                     size_t count)
+{
+        int rc = count;
+        spin_lock(&rbu_data.lock);
+
+        if (strlen(buffer) < MAX_IMAGE_LENGTH)
+                sscanf(buffer, "%s", image_type);
+        else
+                printk(KERN_WARNING "dell_rbu: image_type is invalid"
+                       "max chars = %d, \n incoming str--%s-- \n",
+                       MAX_IMAGE_LENGTH, buffer);
+
+        /* we must free all previous allocations */
+        packet_empty_list();
+        img_update_free();
+
+        spin_unlock(&rbu_data.lock);
+        return rc;
+
+}
+
+static struct bin_attribute rbu_data_attr = {
+        .attr = {.name = "data",.owner = THIS_MODULE,.mode = 0444},
+        .read = read_rbu_data,
+};
+
+static struct bin_attribute rbu_image_type_attr = {
+        .attr = {.name = "image_type",.owner = THIS_MODULE,.mode = 0644},
+        .read = read_rbu_image_type,
+        .write = write_rbu_image_type,
+};
+
+static void callbackfn_rbu(const struct firmware *fw, void *context)
+{
+        int rc = 0;
+
+        if (!fw || !fw->size)
+                return;
+
+        spin_lock(&rbu_data.lock);
+        if (!strcmp(image_type, "mono")) {
+                if (!img_update_realloc(fw->size))
+                        memcpy(rbu_data.image_update_buffer,
+                               fw->data, fw->size);
+        } else if (!strcmp(image_type, "packet")) {
+                if (!rbu_data.packetsize)
+                        rbu_data.packetsize = fw->size;
+                else if (rbu_data.packetsize != fw->size) {
+                        packet_empty_list();
+                        rbu_data.packetsize = fw->size;
+                }
+                packetize_data(fw->data, fw->size);
+        } else
+                pr_debug("invalid image type specified.\n");
+        spin_unlock(&rbu_data.lock);
+
+        rc = request_firmware_nowait(THIS_MODULE, FW_ACTION_NOHOTPLUG,
+                                     "dell_rbu", &rbu_device->dev,
+                                     &context, callbackfn_rbu);
+        if (rc)
+                printk(KERN_ERR
+                       "dell_rbu:%s request_firmware_nowait failed"
+                       " %d\n", __FUNCTION__, rc);
+}
+
+static int __init dcdrbu_init(void)
+{
+        int rc = 0;
+        spin_lock_init(&rbu_data.lock);
+
+        init_packet_head();
+        rbu_device =
+            platform_device_register_simple("dell_rbu", -1, NULL, 0);
+        if (!rbu_device) {
+                printk(KERN_ERR
+                       "dell_rbu:%s:platform_device_register_simple "
+                       "failed\n", __FUNCTION__);
+                return -EIO;
+        }
+
+        sysfs_create_bin_file(&rbu_device->dev.kobj, &rbu_data_attr);
+        sysfs_create_bin_file(&rbu_device->dev.kobj, &rbu_image_type_attr);
+
+        rc = request_firmware_nowait(THIS_MODULE, FW_ACTION_NOHOTPLUG,
+                                     "dell_rbu", &rbu_device->dev,
+                                     &context, callbackfn_rbu);
+        if (rc)
+                printk(KERN_ERR "dell_rbu:%s:request_firmware_nowait"
+                       " failed %d\n", __FUNCTION__, rc);
+
+        return rc;
+
+}
+
+static __exit void dcdrbu_exit(void)
+{
+        spin_lock(&rbu_data.lock);
+        packet_empty_list();
+        img_update_free();
+        spin_unlock(&rbu_data.lock);
+        platform_device_unregister(rbu_device);
+}
+
+module_exit(dcdrbu_exit);
+module_init(dcdrbu_init);