aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--arch/mips/au1000/mtx-1/Makefile3
-rw-r--r--arch/mips/au1000/mtx-1/board_setup.c63
-rw-r--r--arch/mips/au1000/mtx-1/init.c11
-rw-r--r--arch/mips/au1000/mtx-1/irqmap.c18
-rw-r--r--arch/mips/au1000/mtx-1/platform.c3
5 files changed, 46 insertions, 52 deletions
diff --git a/arch/mips/au1000/mtx-1/Makefile b/arch/mips/au1000/mtx-1/Makefile
index 85a90941de4f..7c67b3d33bec 100644
--- a/arch/mips/au1000/mtx-1/Makefile
+++ b/arch/mips/au1000/mtx-1/Makefile
@@ -1,7 +1,6 @@
1# 1#
2# Copyright 2003 MontaVista Software Inc. 2# Copyright 2003 MontaVista Software Inc.
3# Author: MontaVista Software, Inc. 3# Author: MontaVista Software, Inc. <source@mvista.com>
4# ppopov@mvista.com or source@mvista.com
5# Bruno Randolf <bruno.randolf@4g-systems.biz> 4# Bruno Randolf <bruno.randolf@4g-systems.biz>
6# 5#
7# Makefile for 4G Systems MTX-1 board. 6# Makefile for 4G Systems MTX-1 board.
diff --git a/arch/mips/au1000/mtx-1/board_setup.c b/arch/mips/au1000/mtx-1/board_setup.c
index 5736354829c6..3f8079186cf2 100644
--- a/arch/mips/au1000/mtx-1/board_setup.c
+++ b/arch/mips/au1000/mtx-1/board_setup.c
@@ -3,9 +3,8 @@
3 * BRIEF MODULE DESCRIPTION 3 * BRIEF MODULE DESCRIPTION
4 * 4G Systems MTX-1 board setup. 4 * 4G Systems MTX-1 board setup.
5 * 5 *
6 * Copyright 2003 MontaVista Software Inc. 6 * Copyright 2003, 2008 MontaVista Software Inc.
7 * Author: MontaVista Software, Inc. 7 * Author: MontaVista Software, Inc. <source@mvista.com>
8 * ppopov@mvista.com or source@mvista.com
9 * Bruno Randolf <bruno.randolf@4g-systems.biz> 8 * Bruno Randolf <bruno.randolf@4g-systems.biz>
10 * 9 *
11 * This program is free software; you can redistribute it and/or modify it 10 * This program is free software; you can redistribute it and/or modify it
@@ -34,7 +33,7 @@
34#include <asm/mach-au1x00/au1000.h> 33#include <asm/mach-au1x00/au1000.h>
35 34
36extern int (*board_pci_idsel)(unsigned int devsel, int assert); 35extern int (*board_pci_idsel)(unsigned int devsel, int assert);
37int mtx1_pci_idsel(unsigned int devsel, int assert); 36int mtx1_pci_idsel(unsigned int devsel, int assert);
38 37
39void board_reset(void) 38void board_reset(void)
40{ 39{
@@ -45,36 +44,36 @@ void board_reset(void)
45void __init board_setup(void) 44void __init board_setup(void)
46{ 45{
47#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) 46#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
48 // enable USB power switch 47 /* Enable USB power switch */
49 au_writel( au_readl(GPIO2_DIR) | 0x10, GPIO2_DIR ); 48 au_writel(au_readl(GPIO2_DIR) | 0x10, GPIO2_DIR);
50 au_writel( 0x100000, GPIO2_OUTPUT ); 49 au_writel(0x100000, GPIO2_OUTPUT);
51#endif /* defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) */ 50#endif /* defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) */
52 51
53#ifdef CONFIG_PCI 52#ifdef CONFIG_PCI
54#if defined(__MIPSEB__) 53#if defined(__MIPSEB__)
55 au_writel(0xf | (2<<6) | (1<<4), Au1500_PCI_CFG); 54 au_writel(0xf | (2 << 6) | (1 << 4), Au1500_PCI_CFG);
56#else 55#else
57 au_writel(0xf, Au1500_PCI_CFG); 56 au_writel(0xf, Au1500_PCI_CFG);
58#endif 57#endif
59#endif 58#endif
60 59
61 // initialize sys_pinfunc: 60 /* Initialize sys_pinfunc */
62 au_writel( SYS_PF_NI2, SYS_PINFUNC ); 61 au_writel(SYS_PF_NI2, SYS_PINFUNC);
63 62
64 // initialize GPIO 63 /* Initialize GPIO */
65 au_writel( 0xFFFFFFFF, SYS_TRIOUTCLR ); 64 au_writel(0xFFFFFFFF, SYS_TRIOUTCLR);
66 au_writel( 0x00000001, SYS_OUTPUTCLR ); // set M66EN (PCI 66MHz) to OFF 65 au_writel(0x00000001, SYS_OUTPUTCLR); /* set M66EN (PCI 66MHz) to OFF */
67 au_writel( 0x00000008, SYS_OUTPUTSET ); // set PCI CLKRUN# to OFF 66 au_writel(0x00000008, SYS_OUTPUTSET); /* set PCI CLKRUN# to OFF */
68 au_writel( 0x00000002, SYS_OUTPUTSET ); // set EXT_IO3 ON 67 au_writel(0x00000002, SYS_OUTPUTSET); /* set EXT_IO3 ON */
69 au_writel( 0x00000020, SYS_OUTPUTCLR ); // set eth PHY TX_ER to OFF 68 au_writel(0x00000020, SYS_OUTPUTCLR); /* set eth PHY TX_ER to OFF */
70 69
71 // enable LED and set it to green 70 /* Enable LED and set it to green */
72 au_writel( au_readl(GPIO2_DIR) | 0x1800, GPIO2_DIR ); 71 au_writel(au_readl(GPIO2_DIR) | 0x1800, GPIO2_DIR);
73 au_writel( 0x18000800, GPIO2_OUTPUT ); 72 au_writel(0x18000800, GPIO2_OUTPUT);
74 73
75 board_pci_idsel = mtx1_pci_idsel; 74 board_pci_idsel = mtx1_pci_idsel;
76 75
77 printk("4G Systems MTX-1 Board\n"); 76 printk(KERN_INFO "4G Systems MTX-1 Board\n");
78} 77}
79 78
80int 79int
@@ -82,20 +81,18 @@ mtx1_pci_idsel(unsigned int devsel, int assert)
82{ 81{
83#define MTX_IDSEL_ONLY_0_AND_3 0 82#define MTX_IDSEL_ONLY_0_AND_3 0
84#if MTX_IDSEL_ONLY_0_AND_3 83#if MTX_IDSEL_ONLY_0_AND_3
85 if (devsel != 0 && devsel != 3) { 84 if (devsel != 0 && devsel != 3) {
86 printk("*** not 0 or 3\n"); 85 printk(KERN_ERR "*** not 0 or 3\n");
87 return 0; 86 return 0;
88 } 87 }
89#endif 88#endif
90 89
91 if (assert && devsel != 0) { 90 if (assert && devsel != 0)
92 // suppress signal to cardbus 91 /* Suppress signal to Cardbus */
93 au_writel( 0x00000002, SYS_OUTPUTCLR ); // set EXT_IO3 OFF 92 au_writel(0x00000002, SYS_OUTPUTCLR); /* set EXT_IO3 OFF */
94 } 93 else
95 else { 94 au_writel(0x00000002, SYS_OUTPUTSET); /* set EXT_IO3 ON */
96 au_writel( 0x00000002, SYS_OUTPUTSET ); // set EXT_IO3 ON 95 au_sync_udelay(1);
97 } 96 return 1;
98 au_sync_udelay(1);
99 return 1;
100} 97}
101 98
diff --git a/arch/mips/au1000/mtx-1/init.c b/arch/mips/au1000/mtx-1/init.c
index c015cbce1cca..33a4aebe0cba 100644
--- a/arch/mips/au1000/mtx-1/init.c
+++ b/arch/mips/au1000/mtx-1/init.c
@@ -3,9 +3,8 @@
3 * BRIEF MODULE DESCRIPTION 3 * BRIEF MODULE DESCRIPTION
4 * 4G Systems MTX-1 board setup 4 * 4G Systems MTX-1 board setup
5 * 5 *
6 * Copyright 2003 MontaVista Software Inc. 6 * Copyright 2003, 2008 MontaVista Software Inc.
7 * Author: MontaVista Software, Inc. 7 * Author: MontaVista Software, Inc. <source@mvista.com>
8 * ppopov@mvista.com or source@mvista.com
9 * Bruno Randolf <bruno.randolf@4g-systems.biz> 8 * Bruno Randolf <bruno.randolf@4g-systems.biz>
10 * 9 *
11 * This program is free software; you can redistribute it and/or modify it 10 * This program is free software; you can redistribute it and/or modify it
@@ -47,8 +46,8 @@ void __init prom_init(void)
47 unsigned long memsize; 46 unsigned long memsize;
48 47
49 prom_argc = fw_arg0; 48 prom_argc = fw_arg0;
50 prom_argv = (char **) fw_arg1; 49 prom_argv = (char **)fw_arg1;
51 prom_envp = (char **) fw_arg2; 50 prom_envp = (char **)fw_arg2;
52 51
53 prom_init_cmdline(); 52 prom_init_cmdline();
54 53
@@ -56,6 +55,6 @@ void __init prom_init(void)
56 if (!memsize_str) 55 if (!memsize_str)
57 memsize = 0x04000000; 56 memsize = 0x04000000;
58 else 57 else
59 memsize = simple_strtol(memsize_str, NULL, 0); 58 memsize = strict_strtol(memsize_str, 0, NULL);
60 add_memory_region(0, memsize, BOOT_MEM_RAM); 59 add_memory_region(0, memsize, BOOT_MEM_RAM);
61} 60}
diff --git a/arch/mips/au1000/mtx-1/irqmap.c b/arch/mips/au1000/mtx-1/irqmap.c
index 78d70c42c9db..f2bf02951e9c 100644
--- a/arch/mips/au1000/mtx-1/irqmap.c
+++ b/arch/mips/au1000/mtx-1/irqmap.c
@@ -31,18 +31,18 @@
31#include <asm/mach-au1x00/au1000.h> 31#include <asm/mach-au1x00/au1000.h>
32 32
33char irq_tab_alchemy[][5] __initdata = { 33char irq_tab_alchemy[][5] __initdata = {
34 [0] = { -1, INTA, INTA, INTX, INTX}, /* IDSEL 00 - AdapterA-Slot0 (top) */ 34 [0] = { -1, INTA, INTA, INTX, INTX }, /* IDSEL 00 - AdapterA-Slot0 (top) */
35 [1] = { -1, INTB, INTA, INTX, INTX}, /* IDSEL 01 - AdapterA-Slot1 (bottom) */ 35 [1] = { -1, INTB, INTA, INTX, INTX }, /* IDSEL 01 - AdapterA-Slot1 (bottom) */
36 [2] = { -1, INTC, INTD, INTX, INTX}, /* IDSEL 02 - AdapterB-Slot0 (top) */ 36 [2] = { -1, INTC, INTD, INTX, INTX }, /* IDSEL 02 - AdapterB-Slot0 (top) */
37 [3] = { -1, INTD, INTC, INTX, INTX}, /* IDSEL 03 - AdapterB-Slot1 (bottom) */ 37 [3] = { -1, INTD, INTC, INTX, INTX }, /* IDSEL 03 - AdapterB-Slot1 (bottom) */
38 [4] = { -1, INTA, INTB, INTX, INTX}, /* IDSEL 04 - AdapterC-Slot0 (top) */ 38 [4] = { -1, INTA, INTB, INTX, INTX }, /* IDSEL 04 - AdapterC-Slot0 (top) */
39 [5] = { -1, INTB, INTA, INTX, INTX}, /* IDSEL 05 - AdapterC-Slot1 (bottom) */ 39 [5] = { -1, INTB, INTA, INTX, INTX }, /* IDSEL 05 - AdapterC-Slot1 (bottom) */
40 [6] = { -1, INTC, INTD, INTX, INTX}, /* IDSEL 06 - AdapterD-Slot0 (top) */ 40 [6] = { -1, INTC, INTD, INTX, INTX }, /* IDSEL 06 - AdapterD-Slot0 (top) */
41 [7] = { -1, INTD, INTC, INTX, INTX}, /* IDSEL 07 - AdapterD-Slot1 (bottom) */ 41 [7] = { -1, INTD, INTC, INTX, INTX }, /* IDSEL 07 - AdapterD-Slot1 (bottom) */
42}; 42};
43 43
44struct au1xxx_irqmap __initdata au1xxx_irq_map[] = { 44struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
45 { AU1500_GPIO_204, INTC_INT_HIGH_LEVEL, 0}, 45 { AU1500_GPIO_204, INTC_INT_HIGH_LEVEL, 0 },
46 { AU1500_GPIO_201, INTC_INT_LOW_LEVEL, 0 }, 46 { AU1500_GPIO_201, INTC_INT_LOW_LEVEL, 0 },
47 { AU1500_GPIO_202, INTC_INT_LOW_LEVEL, 0 }, 47 { AU1500_GPIO_202, INTC_INT_LOW_LEVEL, 0 },
48 { AU1500_GPIO_203, INTC_INT_LOW_LEVEL, 0 }, 48 { AU1500_GPIO_203, INTC_INT_LOW_LEVEL, 0 },
diff --git a/arch/mips/au1000/mtx-1/platform.c b/arch/mips/au1000/mtx-1/platform.c
index a7edbf0829ac..9807be37c32f 100644
--- a/arch/mips/au1000/mtx-1/platform.c
+++ b/arch/mips/au1000/mtx-1/platform.c
@@ -21,11 +21,10 @@
21#include <linux/init.h> 21#include <linux/init.h>
22#include <linux/platform_device.h> 22#include <linux/platform_device.h>
23#include <linux/leds.h> 23#include <linux/leds.h>
24#include <linux/gpio.h>
24#include <linux/gpio_keys.h> 25#include <linux/gpio_keys.h>
25#include <linux/input.h> 26#include <linux/input.h>
26 27
27#include <asm/gpio.h>
28
29static struct gpio_keys_button mtx1_gpio_button[] = { 28static struct gpio_keys_button mtx1_gpio_button[] = {
30 { 29 {
31 .gpio = 207, 30 .gpio = 207,
generated by cgit v1.2.2 (git 2.25.0) at 2024-12-18 13:47:37 -0500