228 files changed, 16801 insertions, 1960 deletions
diff --git a/Documentation/arm/00-INDEX b/Documentation/arm/00-INDEX
index 82e418d648d0..7f5fc3ba9c91 100644
--- a/Documentation/arm/00-INDEX
+++ b/Documentation/arm/00-INDEX
@@ -20,6 +20,8 @@ Samsung-S3C24XX
        - S3C24XX ARM Linux Overview
 Sharp-LH
        - Linux on Sharp LH79524 and LH7A40X System On a Chip (SOC)
+SPEAr
+        - ST SPEAr platform Linux Overview
 VFP/
        - Release notes for Linux Kernel Vector Floating Point support code
 empeg/
diff --git a/Documentation/arm/SPEAr/overview.txt b/Documentation/arm/SPEAr/overview.txt
new file mode 100644
index 000000000000..253a35c6f782
--- /dev/null
+++ b/Documentation/arm/SPEAr/overview.txt
@@ -0,0 +1,60 @@
+                        SPEAr ARM Linux Overview
+                        ==========================
+Introduction
+------------
+  SPEAr (Structured Processor Enhanced Architecture).
+  weblink : http://www.st.com/spear
+  The ST Microelectronics SPEAr range of ARM9/CortexA9 System-on-Chip CPUs are
+  supported by the 'spear' platform of ARM Linux. Currently SPEAr300,
+  SPEAr310, SPEAr320 and SPEAr600 SOCs are supported. Support for the SPEAr13XX
+  series is in progress.
+  Hierarchy in SPEAr is as follows:
+  SPEAr (Platform)
+        - SPEAr3XX (3XX SOC series, based on ARM9)
+                - SPEAr300 (SOC)
+                        - SPEAr300_EVB (Evaluation Board)
+                - SPEAr310 (SOC)
+                        - SPEAr310_EVB (Evaluation Board)
+                - SPEAr320 (SOC)
+                        - SPEAr320_EVB (Evaluation Board)
+        - SPEAr6XX (6XX SOC series, based on ARM9)
+                - SPEAr600 (SOC)
+                        - SPEAr600_EVB (Evaluation Board)
+        - SPEAr13XX (13XX SOC series, based on ARM CORTEXA9)
+                - SPEAr1300 (SOC)
+  Configuration
+  -------------
+  A generic configuration is provided for each machine, and can be used as the
+  default by
+        make spear600_defconfig
+        make spear300_defconfig
+        make spear310_defconfig
+        make spear320_defconfig
+  Layout
+  ------
+  The common files for multiple machine families (SPEAr3XX, SPEAr6XX and
+  SPEAr13XX) are located in the platform code contained in arch/arm/plat-spear
+  with headers in plat/.
+  Each machine series have a directory with name arch/arm/mach-spear followed by
+  series name. Like mach-spear3xx, mach-spear6xx and mach-spear13xx.
+  Common file for machines of spear3xx family is mach-spear3xx/spear3xx.c and for
+  spear6xx is mach-spear6xx/spear6xx.c. mach-spear* also contain soc/machine
+  specific files, like spear300.c, spear310.c, spear320.c and spear600.c.
+  mach-spear* also contains board specific files for each machine type.
+  Document Author
+  ---------------
+  Viresh Kumar, (c) 2010 ST Microelectronics
diff --git a/MAINTAINERS b/MAINTAINERS
index 382eaa4d0068..aa18ca333f80 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -5229,6 +5229,46 @@ F:	drivers/serial/sunsu.c
 F:      drivers/serial/sunzilog.c
 F:      drivers/serial/sunzilog.h
+SPEAR PLATFORM SUPPORT
+M:      Viresh Kumar <viresh.kumar@st.com>
+W:      http://www.st.com/spear
+S:      Maintained
+F:      arch/arm/plat-spear/
+SPEAR3XX MACHINE SUPPORT
+M:      Viresh Kumar <viresh.kumar@st.com>
+W:      http://www.st.com/spear
+S:      Maintained
+F:      arch/arm/mach-spear3xx/
+SPEAR6XX MACHINE SUPPORT
+M:      Rajeev Kumar <rajeev-dlh.kumar@st.com>
+W:      http://www.st.com/spear
+S:      Maintained
+F:      arch/arm/mach-spear6xx/
+SPEAR CLOCK FRAMEWORK SUPPORT
+M:      Viresh Kumar <viresh.kumar@st.com>
+W:      http://www.st.com/spear
+S:      Maintained
+F:      arch/arm/mach-spear*/clock.c
+F:      arch/arm/mach-spear*/include/mach/clkdev.h
+F:      arch/arm/plat-spear/clock.c
+F:      arch/arm/plat-spear/include/plat/clock.h and clkdev.h
+SPEAR PAD MULTIPLEXING SUPPORT
+M:      Viresh Kumar <viresh.kumar@st.com>
+W:      http://www.st.com/spear
+S:      Maintained
+F:      arch/arm/plat-spear/include/plat/padmux.h
+F:      arch/arm/plat-spear/padmux.c
+F:      arch/arm/mach-spear*/spear*xx.c
+F:      arch/arm/mach-spear*/include/mach/generic.h
+F:      arch/arm/mach-spear3xx/spear3*0.c
+F:      arch/arm/mach-spear3xx/spear3*0_evb.c
+F:      arch/arm/mach-spear6xx/spear600.c
+F:      arch/arm/mach-spear6xx/spear600_evb.c
 SPECIALIX IO8+ MULTIPORT SERIAL CARD DRIVER
 M:      Roger Wolff <R.E.Wolff@BitWizard.nl>
 S:      Supported
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 88f9334110cf..daaa4b2b46e1 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -246,7 +246,10 @@ config ARCH_INTEGRATOR
        select ARM_AMBA
        select ARCH_HAS_CPUFREQ
        select COMMON_CLKDEV
-        select ICST525
+        select ICST
+        select GENERIC_TIME
+        select GENERIC_CLOCKEVENTS
+        select PLAT_VERSATILE
        help
          Support for ARM's Integrator platform.
@@ -254,10 +257,12 @@ config ARCH_REALVIEW
        bool "ARM Ltd. RealView family"
        select ARM_AMBA
        select COMMON_CLKDEV
-        select ICST307
+        select ICST
        select GENERIC_TIME
        select GENERIC_CLOCKEVENTS
        select ARCH_WANT_OPTIONAL_GPIOLIB
+        select PLAT_VERSATILE
+        select ARM_TIMER_SP804
        help
          This enables support for ARM Ltd RealView boards.
@@ -266,13 +271,29 @@ config ARCH_VERSATILE
        select ARM_AMBA
        select ARM_VIC
        select COMMON_CLKDEV
-        select ICST307
+        select ICST
        select GENERIC_TIME
        select GENERIC_CLOCKEVENTS
        select ARCH_WANT_OPTIONAL_GPIOLIB
+        select PLAT_VERSATILE
+        select ARM_TIMER_SP804
        help
          This enables support for ARM Ltd Versatile board.
+config ARCH_VEXPRESS
+        bool "ARM Ltd. Versatile Express family"
+        select ARCH_WANT_OPTIONAL_GPIOLIB
+        select ARM_AMBA
+        select ARM_TIMER_SP804
+        select COMMON_CLKDEV
+        select GENERIC_CLOCKEVENTS
+        select GENERIC_TIME
+        select HAVE_CLK
+        select ICST
+        select PLAT_VERSATILE
+        help
+          This enables support for the ARM Ltd Versatile Express boards.
 config ARCH_AT91
        bool "Atmel AT91"
        select GENERIC_GPIO
@@ -768,6 +789,7 @@ config ARCH_U8500
        select GENERIC_TIME
        select GENERIC_CLOCKEVENTS
        select COMMON_CLKDEV
+        select ARCH_REQUIRE_GPIOLIB
        help
          Support for ST-Ericsson's Ux500 architecture
@@ -811,6 +833,18 @@ config ARCH_OMAP
        help
          Support for TI's OMAP platform (OMAP1 and OMAP2).
+config PLAT_SPEAR
+        bool "ST SPEAr"
+        select ARM_AMBA
+        select ARCH_REQUIRE_GPIOLIB
+        select COMMON_CLKDEV
+        select GENERIC_CLOCKEVENTS
+        select GENERIC_GPIO
+        select GENERIC_TIME
+        select HAVE_CLK
+        help
+          Support for ST's SPEAr platform (SPEAr3xx, SPEAr6xx and SPEAr13xx).
 endchoice
 #
@@ -896,6 +930,7 @@ source "arch/arm/plat-samsung/Kconfig"
 source "arch/arm/plat-s3c24xx/Kconfig"
 source "arch/arm/plat-s5p/Kconfig"
 source "arch/arm/plat-s5pc1xx/Kconfig"
+source "arch/arm/plat-spear/Kconfig"
 if ARCH_S3C2410
 source "arch/arm/mach-s3c2400/Kconfig"
@@ -929,6 +964,8 @@ source "arch/arm/mach-ux500/Kconfig"
 source "arch/arm/mach-versatile/Kconfig"
+source "arch/arm/mach-vexpress/Kconfig"
 source "arch/arm/mach-w90x900/Kconfig"
 # Definitions to make life easier
@@ -946,6 +983,12 @@ config PLAT_ORION
 config PLAT_PXA
        bool
+config PLAT_VERSATILE
+        bool
+config ARM_TIMER_SP804
+        bool
 source arch/arm/mm/Kconfig
 config IWMMXT
@@ -1106,10 +1149,11 @@ source "kernel/time/Kconfig"
 config SMP
        bool "Symmetric Multi-Processing (EXPERIMENTAL)"
        depends on EXPERIMENTAL && (REALVIEW_EB_ARM11MP || REALVIEW_EB_A9MP ||\
-                 MACH_REALVIEW_PB11MP || MACH_REALVIEW_PBX || ARCH_OMAP4 || ARCH_U8500)
+                 MACH_REALVIEW_PB11MP || MACH_REALVIEW_PBX || ARCH_OMAP4 ||\
+                 ARCH_U8500 || ARCH_VEXPRESS_CA9X4)
        depends on GENERIC_CLOCKEVENTS
        select USE_GENERIC_SMP_HELPERS
-        select HAVE_ARM_SCU if (ARCH_REALVIEW || ARCH_OMAP4 || ARCH_U8500)
+        select HAVE_ARM_SCU if (ARCH_REALVIEW || ARCH_OMAP4 || ARCH_U8500 || ARCH_VEXPRESS_CA9X4)
        help
          This enables support for systems with more than one CPU. If you have
          a system with only one CPU, like most personal computers, say N. If
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index ed820e737a8a..219cb4ee7e32 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -175,9 +175,14 @@ machine-$(CONFIG_ARCH_STMP37XX)		:= stmp37xx
 machine-$(CONFIG_ARCH_U300)             := u300
 machine-$(CONFIG_ARCH_U8500)            := ux500
 machine-$(CONFIG_ARCH_VERSATILE)        := versatile
+machine-$(CONFIG_ARCH_VEXPRESS)         := vexpress
 machine-$(CONFIG_ARCH_W90X900)          := w90x900
 machine-$(CONFIG_ARCH_NUC93X)           := nuc93x
 machine-$(CONFIG_FOOTBRIDGE)            := footbridge
+machine-$(CONFIG_MACH_SPEAR300)         := spear3xx
+machine-$(CONFIG_MACH_SPEAR310)         := spear3xx
+machine-$(CONFIG_MACH_SPEAR320)         := spear3xx
+machine-$(CONFIG_MACH_SPEAR600)         := spear6xx
 # Platform directory name.  This list is sorted alphanumerically
 # by CONFIG_* macro name.
@@ -192,6 +197,8 @@ plat-$(CONFIG_PLAT_PXA)		:= pxa
 plat-$(CONFIG_PLAT_S3C24XX)     := s3c24xx samsung
 plat-$(CONFIG_PLAT_S5PC1XX)     := s5pc1xx samsung
 plat-$(CONFIG_PLAT_S5P)         := s5p samsung
+plat-$(CONFIG_PLAT_SPEAR)       := spear
+plat-$(CONFIG_PLAT_VERSATILE)   := versatile
 ifeq ($(CONFIG_ARCH_EBSA110),y)
 # This is what happens if you forget the IOCS16 line.
diff --git a/arch/arm/common/Kconfig b/arch/arm/common/Kconfig
index cf9059091884..0a34c8186924 100644
--- a/arch/arm/common/Kconfig
+++ b/arch/arm/common/Kconfig
@@ -12,10 +12,7 @@ config ARM_VIC_NR
          The maximum number of VICs available in the system, for
          power management.
-config ICST525
+config ICST
-        bool
-config ICST307
        bool
 config PL330
diff --git a/arch/arm/common/Makefile b/arch/arm/common/Makefile
index df20c2650206..e6e8664a9413 100644
--- a/arch/arm/common/Makefile
+++ b/arch/arm/common/Makefile
@@ -4,8 +4,7 @@
 obj-$(CONFIG_ARM_GIC)           += gic.o
 obj-$(CONFIG_ARM_VIC)           += vic.o
-obj-$(CONFIG_ICST525)           += icst525.o
+obj-$(CONFIG_ICST)              += icst.o
-obj-$(CONFIG_ICST307)           += icst307.o
 obj-$(CONFIG_PL330)             += pl330.o
 obj-$(CONFIG_SA1111)            += sa1111.o
 obj-$(CONFIG_PCI_HOST_VIA82C505) += via82c505.o
diff --git a/arch/arm/common/icst.c b/arch/arm/common/icst.c
new file mode 100644
index 000000000000..9a7f09cff300
--- /dev/null
+++ b/arch/arm/common/icst.c
@@ -0,0 +1,100 @@
+/*
+ *  linux/arch/arm/common/icst307.c
+ *
+ *  Copyright (C) 2003 Deep Blue Solutions, Ltd, All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  Support functions for calculating clocks/divisors for the ICST307
+ *  clock generators.  See http://www.icst.com/ for more information
+ *  on these devices.
+ *
+ *  This is an almost identical implementation to the ICST525 clock generator.
+ *  The s2div and idx2s files are different
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <asm/hardware/icst.h>
+/*
+ * Divisors for each OD setting.
+ */
+const unsigned char icst307_s2div[8] = { 10, 2, 8, 4, 5, 7, 3, 6 };
+const unsigned char icst525_s2div[8] = { 10, 2, 8, 4, 5, 7, 9, 6 };
+EXPORT_SYMBOL(icst307_s2div);
+EXPORT_SYMBOL(icst525_s2div);
+unsigned long icst_hz(const struct icst_params *p, struct icst_vco vco)
+{
+        return p->ref * 2 * (vco.v + 8) / ((vco.r + 2) * p->s2div[vco.s]);
+}
+EXPORT_SYMBOL(icst_hz);
+/*
+ * Ascending divisor S values.
+ */
+const unsigned char icst307_idx2s[8] = { 1, 6, 3, 4, 7, 5, 2, 0 };
+const unsigned char icst525_idx2s[8] = { 1, 3, 4, 7, 5, 2, 6, 0 };
+EXPORT_SYMBOL(icst307_idx2s);
+EXPORT_SYMBOL(icst525_idx2s);
+struct icst_vco
+icst_hz_to_vco(const struct icst_params *p, unsigned long freq)
+{
+        struct icst_vco vco = { .s = 1, .v = p->vd_max, .r = p->rd_max };
+        unsigned long f;
+        unsigned int i = 0, rd, best = (unsigned int)-1;
+        /*
+         * First, find the PLL output divisor such
+         * that the PLL output is within spec.
+         */
+        do {
+                f = freq * p->s2div[p->idx2s[i]];
+                if (f > p->vco_min && f <= p->vco_max)
+                        break;
+        } while (i < 8);
+        if (i >= 8)
+                return vco;
+        vco.s = p->idx2s[i];
+        /*
+         * Now find the closest divisor combination
+         * which gives a PLL output of 'f'.
+         */
+        for (rd = p->rd_min; rd <= p->rd_max; rd++) {
+                unsigned long fref_div, f_pll;
+                unsigned int vd;
+                int f_diff;
+                fref_div = (2 * p->ref) / rd;
+                vd = (f + fref_div / 2) / fref_div;
+                if (vd < p->vd_min || vd > p->vd_max)
+                        continue;
+                f_pll = fref_div * vd;
+                f_diff = f_pll - f;
+                if (f_diff < 0)
+                        f_diff = -f_diff;
+                if ((unsigned)f_diff < best) {
+                        vco.v = vd - 8;
+                        vco.r = rd - 2;
+                        if (f_diff == 0)
+                                break;
+                        best = f_diff;
+                }
+        }
+        return vco;
+}
+EXPORT_SYMBOL(icst_hz_to_vco);
diff --git a/arch/arm/common/icst307.c b/arch/arm/common/icst307.c
deleted file mode 100644
index 6d094c157540..000000000000
--- a/arch/arm/common/icst307.c
+++ /dev/null
@@ -1,161 +0,0 @@
-/*
- *  linux/arch/arm/common/icst307.c
- *
- *  Copyright (C) 2003 Deep Blue Solutions, Ltd, All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  Support functions for calculating clocks/divisors for the ICST307
- *  clock generators.  See http://www.icst.com/ for more information
- *  on these devices.
- *
- *  This is an almost identical implementation to the ICST525 clock generator.
- *  The s2div and idx2s files are different
- */
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <asm/hardware/icst307.h>
-/*
- * Divisors for each OD setting.
- */
-static unsigned char s2div[8] = { 10, 2, 8, 4, 5, 7, 3, 6 };
-unsigned long icst307_khz(const struct icst307_params *p, struct icst307_vco vco)
-{
-        return p->ref * 2 * (vco.v + 8) / ((vco.r + 2) * s2div[vco.s]);
-}
-EXPORT_SYMBOL(icst307_khz);
-/*
- * Ascending divisor S values.
- */
-static unsigned char idx2s[8] = { 1, 6, 3, 4, 7, 5, 2, 0 };
-struct icst307_vco
-icst307_khz_to_vco(const struct icst307_params *p, unsigned long freq)
-{
-        struct icst307_vco vco = { .s = 1, .v = p->vd_max, .r = p->rd_max };
-        unsigned long f;
-        unsigned int i = 0, rd, best = (unsigned int)-1;
-        /*
-         * First, find the PLL output divisor such
-         * that the PLL output is within spec.
-         */
-        do {
-                f = freq * s2div[idx2s[i]];
-                /*
-                 * f must be between 6MHz and 200MHz (3.3 or 5V)
-                 */
-                if (f > 6000 && f <= p->vco_max)
-                        break;
-        } while (i < ARRAY_SIZE(idx2s));
-        if (i >= ARRAY_SIZE(idx2s))
-                return vco;
-        vco.s = idx2s[i];
-        /*
-         * Now find the closest divisor combination
-         * which gives a PLL output of 'f'.
-         */
-        for (rd = p->rd_min; rd <= p->rd_max; rd++) {
-                unsigned long fref_div, f_pll;
-                unsigned int vd;
-                int f_diff;
-                fref_div = (2 * p->ref) / rd;
-                vd = (f + fref_div / 2) / fref_div;
-                if (vd < p->vd_min || vd > p->vd_max)
-                        continue;
-                f_pll = fref_div * vd;
-                f_diff = f_pll - f;
-                if (f_diff < 0)
-                        f_diff = -f_diff;
-                if ((unsigned)f_diff < best) {
-                        vco.v = vd - 8;
-                        vco.r = rd - 2;
-                        if (f_diff == 0)
-                                break;
-                        best = f_diff;
-                }
-        }
-        return vco;
-}
-EXPORT_SYMBOL(icst307_khz_to_vco);
-struct icst307_vco
-icst307_ps_to_vco(const struct icst307_params *p, unsigned long period)
-{
-        struct icst307_vco vco = { .s = 1, .v = p->vd_max, .r = p->rd_max };
-        unsigned long f, ps;
-        unsigned int i = 0, rd, best = (unsigned int)-1;
-        ps = 1000000000UL / p->vco_max;
-        /*
-         * First, find the PLL output divisor such
-         * that the PLL output is within spec.
-         */
-        do {
-                f = period / s2div[idx2s[i]];
-                /*
-                 * f must be between 6MHz and 200MHz (3.3 or 5V)
-                 */
-                if (f >= ps && f < 1000000000UL / 6000 + 1)
-                        break;
-        } while (i < ARRAY_SIZE(idx2s));
-        if (i >= ARRAY_SIZE(idx2s))
-                return vco;
-        vco.s = idx2s[i];
-        ps = 500000000UL / p->ref;
-        /*
-         * Now find the closest divisor combination
-         * which gives a PLL output of 'f'.
-         */
-        for (rd = p->rd_min; rd <= p->rd_max; rd++) {
-                unsigned long f_in_div, f_pll;
-                unsigned int vd;
-                int f_diff;
-                f_in_div = ps * rd;
-                vd = (f_in_div + f / 2) / f;
-                if (vd < p->vd_min || vd > p->vd_max)
-                        continue;
-                f_pll = (f_in_div + vd / 2) / vd;
-                f_diff = f_pll - f;
-                if (f_diff < 0)
-                        f_diff = -f_diff;
-                if ((unsigned)f_diff < best) {
-                        vco.v = vd - 8;
-                        vco.r = rd - 2;
-                        if (f_diff == 0)
-                                break;
-                        best = f_diff;
-                }
-        }
-        return vco;
-}
-EXPORT_SYMBOL(icst307_ps_to_vco);
diff --git a/arch/arm/common/icst525.c b/arch/arm/common/icst525.c
deleted file mode 100644
index 3d377c5bdef6..000000000000
--- a/arch/arm/common/icst525.c
+++ /dev/null
@@ -1,160 +0,0 @@
-/*
- *  linux/arch/arm/common/icst525.c
- *
- *  Copyright (C) 2003 Deep Blue Solutions, Ltd, All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  Support functions for calculating clocks/divisors for the ICST525
- *  clock generators.  See http://www.icst.com/ for more information
- *  on these devices.
- */
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <asm/hardware/icst525.h>
-/*
- * Divisors for each OD setting.
- */
-static unsigned char s2div[8] = { 10, 2, 8, 4, 5, 7, 9, 6 };
-unsigned long icst525_khz(const struct icst525_params *p, struct icst525_vco vco)
-{
-        return p->ref * 2 * (vco.v + 8) / ((vco.r + 2) * s2div[vco.s]);
-}
-EXPORT_SYMBOL(icst525_khz);
-/*
- * Ascending divisor S values.
- */
-static unsigned char idx2s[] = { 1, 3, 4, 7, 5, 2, 6, 0 };
-struct icst525_vco
-icst525_khz_to_vco(const struct icst525_params *p, unsigned long freq)
-{
-        struct icst525_vco vco = { .s = 1, .v = p->vd_max, .r = p->rd_max };
-        unsigned long f;
-        unsigned int i = 0, rd, best = (unsigned int)-1;
-        /*
-         * First, find the PLL output divisor such
-         * that the PLL output is within spec.
-         */
-        do {
-                f = freq * s2div[idx2s[i]];
-                /*
-                 * f must be between 10MHz and
-                 *  320MHz (5V) or 200MHz (3V)
-                 */
-                if (f > 10000 && f <= p->vco_max)
-                        break;
-        } while (i < ARRAY_SIZE(idx2s));
-        if (i >= ARRAY_SIZE(idx2s))
-                return vco;
-        vco.s = idx2s[i];
-        /*
-         * Now find the closest divisor combination
-         * which gives a PLL output of 'f'.
-         */
-        for (rd = p->rd_min; rd <= p->rd_max; rd++) {
-                unsigned long fref_div, f_pll;
-                unsigned int vd;
-                int f_diff;
-                fref_div = (2 * p->ref) / rd;
-                vd = (f + fref_div / 2) / fref_div;
-                if (vd < p->vd_min || vd > p->vd_max)
-                        continue;
-                f_pll = fref_div * vd;
-                f_diff = f_pll - f;
-                if (f_diff < 0)
-                        f_diff = -f_diff;
-                if ((unsigned)f_diff < best) {
-                        vco.v = vd - 8;
-                        vco.r = rd - 2;
-                        if (f_diff == 0)
-                                break;
-                        best = f_diff;
-                }
-        }
-        return vco;
-}
-EXPORT_SYMBOL(icst525_khz_to_vco);
-struct icst525_vco
-icst525_ps_to_vco(const struct icst525_params *p, unsigned long period)
-{
-        struct icst525_vco vco = { .s = 1, .v = p->vd_max, .r = p->rd_max };
-        unsigned long f, ps;
-        unsigned int i = 0, rd, best = (unsigned int)-1;
-        ps = 1000000000UL / p->vco_max;
-        /*
-         * First, find the PLL output divisor such
-         * that the PLL output is within spec.
-         */
-        do {
-                f = period / s2div[idx2s[i]];
-                /*
-                 * f must be between 10MHz and
-                 *  320MHz (5V) or 200MHz (3V)
-                 */
-                if (f >= ps && f < 100000)
-                        break;
-        } while (i < ARRAY_SIZE(idx2s));
-        if (i >= ARRAY_SIZE(idx2s))
-                return vco;
-        vco.s = idx2s[i];
-        ps = 500000000UL / p->ref;
-        /*
-         * Now find the closest divisor combination
-         * which gives a PLL output of 'f'.
-         */
-        for (rd = p->rd_min; rd <= p->rd_max; rd++) {
-                unsigned long f_in_div, f_pll;
-                unsigned int vd;
-                int f_diff;
-                f_in_div = ps * rd;
-                vd = (f_in_div + f / 2) / f;
-                if (vd < p->vd_min || vd > p->vd_max)
-                        continue;
-                f_pll = (f_in_div + vd / 2) / vd;
-                f_diff = f_pll - f;
-                if (f_diff < 0)
-                        f_diff = -f_diff;
-                if ((unsigned)f_diff < best) {
-                        vco.v = vd - 8;
-                        vco.r = rd - 2;
-                        if (f_diff == 0)
-                                break;
-                        best = f_diff;
-                }
-        }
-        return vco;
-}
-EXPORT_SYMBOL(icst525_ps_to_vco);
diff --git a/arch/arm/common/vic.c b/arch/arm/common/vic.c
index 1cf999ade4bc..ba65f6eedca6 100644
--- a/arch/arm/common/vic.c
+++ b/arch/arm/common/vic.c
@@ -266,13 +266,53 @@ static int vic_set_wake(unsigned int irq, unsigned int on)
 #endif /* CONFIG_PM */
 static struct irq_chip vic_chip = {
-        .name   = "VIC",
+        .name           = "VIC",
-        .ack    = vic_ack_irq,
+        .ack            = vic_ack_irq,
-        .mask   = vic_mask_irq,
+        .mask           = vic_mask_irq,
-        .unmask = vic_unmask_irq,
+        .unmask         = vic_unmask_irq,
-        .set_wake = vic_set_wake,
+        .set_wake       = vic_set_wake,
 };
+static void __init vic_disable(void __iomem *base)
+{
+        writel(0, base + VIC_INT_SELECT);
+        writel(0, base + VIC_INT_ENABLE);
+        writel(~0, base + VIC_INT_ENABLE_CLEAR);
+        writel(0, base + VIC_IRQ_STATUS);
+        writel(0, base + VIC_ITCR);
+        writel(~0, base + VIC_INT_SOFT_CLEAR);
+}
+static void __init vic_clear_interrupts(void __iomem *base)
+{
+        unsigned int i;
+        writel(0, base + VIC_PL190_VECT_ADDR);
+        for (i = 0; i < 19; i++) {
+                unsigned int value;
+                value = readl(base + VIC_PL190_VECT_ADDR);
+                writel(value, base + VIC_PL190_VECT_ADDR);
+        }
+}
+static void __init vic_set_irq_sources(void __iomem *base,
+                                unsigned int irq_start, u32 vic_sources)
+{
+        unsigned int i;
+        for (i = 0; i < 32; i++) {
+                if (vic_sources & (1 << i)) {
+                        unsigned int irq = irq_start + i;
+                        set_irq_chip(irq, &vic_chip);
+                        set_irq_chip_data(irq, base);
+                        set_irq_handler(irq, handle_level_irq);
+                        set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
+                }
+        }
+}
 /*
 * The PL190 cell from ARM has been modified by ST to handle 64 interrupts.
 * The original cell has 32 interrupts, while the modified one has 64,
@@ -287,13 +327,7 @@ static void __init vic_init_st(void __iomem *base, unsigned int irq_start,
        int vic_2nd_block = ((unsigned long)base & ~PAGE_MASK) != 0;
        /* Disable all interrupts initially. */
+        vic_disable(base);
-        writel(0, base + VIC_INT_SELECT);
-        writel(0, base + VIC_INT_ENABLE);
-        writel(~0, base + VIC_INT_ENABLE_CLEAR);
-        writel(0, base + VIC_IRQ_STATUS);
-        writel(0, base + VIC_ITCR);
-        writel(~0, base + VIC_INT_SOFT_CLEAR);
        /*
         * Make sure we clear all existing interrupts. The vector registers
@@ -302,13 +336,8 @@ static void __init vic_init_st(void __iomem *base, unsigned int irq_start,
         * the second base address, which is 0x20 in the page
         */
        if (vic_2nd_block) {
-                writel(0, base + VIC_PL190_VECT_ADDR);
+                vic_clear_interrupts(base);
-                for (i = 0; i < 19; i++) {
-                        unsigned int value;
-                        value = readl(base + VIC_PL190_VECT_ADDR);
-                        writel(value, base + VIC_PL190_VECT_ADDR);
-                }
                /* ST has 16 vectors as well, but we don't enable them by now */
                for (i = 0; i < 16; i++) {
                        void __iomem *reg = base + VIC_VECT_CNTL0 + (i * 4);
@@ -318,16 +347,7 @@ static void __init vic_init_st(void __iomem *base, unsigned int irq_start,
                writel(32, base + VIC_PL190_DEF_VECT_ADDR);
        }
-        for (i = 0; i < 32; i++) {
+        vic_set_irq_sources(base, irq_start, vic_sources);
-                if (vic_sources & (1 << i)) {
-                        unsigned int irq = irq_start + i;
-                        set_irq_chip(irq, &vic_chip);
-                        set_irq_chip_data(irq, base);
-                        set_irq_handler(irq, handle_level_irq);
-                        set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
-                }
-        }
 }
 /**
@@ -365,37 +385,14 @@ void __init vic_init(void __iomem *base, unsigned int irq_start,
        }
        /* Disable all interrupts initially. */
+        vic_disable(base);
-        writel(0, base + VIC_INT_SELECT);
+        /* Make sure we clear all existing interrupts */
-        writel(0, base + VIC_INT_ENABLE);
+        vic_clear_interrupts(base);
-        writel(~0, base + VIC_INT_ENABLE_CLEAR);
-        writel(0, base + VIC_IRQ_STATUS);
-        writel(0, base + VIC_ITCR);
-        writel(~0, base + VIC_INT_SOFT_CLEAR);
-        /*
-         * Make sure we clear all existing interrupts
-         */
-        writel(0, base + VIC_PL190_VECT_ADDR);
-        for (i = 0; i < 19; i++) {
-                unsigned int value;
-                value = readl(base + VIC_PL190_VECT_ADDR);
-                writel(value, base + VIC_PL190_VECT_ADDR);
-        }
        vic_init2(base);
-        for (i = 0; i < 32; i++) {
+        vic_set_irq_sources(base, irq_start, vic_sources);
-                if (vic_sources & (1 << i)) {
-                        unsigned int irq = irq_start + i;
-                        set_irq_chip(irq, &vic_chip);
-                        set_irq_chip_data(irq, base);
-                        set_irq_handler(irq, handle_level_irq);
-                        set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
-                }
-        }
        vic_pm_register(base, irq_start, resume_sources);
 }
diff --git a/arch/arm/configs/spear300_defconfig b/arch/arm/configs/spear300_defconfig
new file mode 100644
index 000000000000..35e64d1cb750
--- /dev/null
+++ b/arch/arm/configs/spear300_defconfig
@@ -0,0 +1,773 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.32
+# Tue Mar 23 14:36:23 2010
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=17
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_MODVERSIONS=y
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_FREEZER is not set
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_BCMRING is not set
+CONFIG_PLAT_SPEAR=y
+CONFIG_ARCH_SPEAR3XX=y
+# CONFIG_ARCH_SPEAR6XX is not set
+CONFIG_MACH_SPEAR300=y
+# CONFIG_MACH_SPEAR310 is not set
+# CONFIG_MACH_SPEAR320 is not set
+CONFIG_BOARD_SPEAR300_EVB=y
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_LEGACY=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+CONFIG_ARM_L1_CACHE_SHIFT=5
+CONFIG_ARM_VIC=y
+CONFIG_ARM_VIC_NR=2
+CONFIG_COMMON_CLKDEV=y
+#
+# Bus support
+#
+CONFIG_ARM_AMBA=y
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+#
+# Kernel Features
+#
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0
+CONFIG_ZBOOT_ROM_BSS=0
+CONFIG_CMDLINE=""
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+#
+# Floating point emulation
+#
+#
+# At least one emulation must be selected
+#
+# CONFIG_FPE_NWFPE is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+CONFIG_BINFMT_MISC=y
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_NET is not set
+#
+# Device Drivers
+#
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=16384
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_PHONE is not set
+#
+# Input device support
+#
+CONFIG_INPUT=y
+CONFIG_INPUT_FF_MEMLESS=y
+# CONFIG_INPUT_POLLDEV is not set
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_AMBAKMI is not set
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_AMBA_PL010 is not set
+CONFIG_SERIAL_AMBA_PL011=y
+CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+CONFIG_RAW_DRIVER=y
+CONFIG_MAX_RAW_DEVS=8192
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+#
+# Memory mapped GPIO expanders:
+#
+CONFIG_GPIO_PL061=y
+#
+# I2C GPIO expanders:
+#
+#
+# PCI GPIO expanders:
+#
+#
+# SPI GPIO expanders:
+#
+#
+# AC97 GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+# CONFIG_EXT2_FS_POSIX_ACL is not set
+CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+CONFIG_EXT3_FS_SECURITY=y
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+# CONFIG_INOTIFY is not set
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+CONFIG_AUTOFS4_FS=m
+# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
+# CONFIG_NTFS_FS is not set
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="utf8"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+CONFIG_NLS_ASCII=m
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+CONFIG_DEBUG_SPINLOCK=y
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+CONFIG_DEBUG_SPINLOCK_SLEEP=y
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+CONFIG_RCU_CPU_STALL_DETECTOR=y
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_BOOT_TRACER is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
+#
+# Library routines
+#
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+# CONFIG_CRC32 is not set
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/spear310_defconfig b/arch/arm/configs/spear310_defconfig
new file mode 100644
index 000000000000..cbbfd290bba8
--- /dev/null
+++ b/arch/arm/configs/spear310_defconfig
@@ -0,0 +1,775 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.32
+# Tue Mar 23 14:37:01 2010
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=17
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_MODVERSIONS=y
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_FREEZER is not set
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_BCMRING is not set
+CONFIG_PLAT_SPEAR=y
+CONFIG_ARCH_SPEAR3XX=y
+# CONFIG_ARCH_SPEAR6XX is not set
+# CONFIG_MACH_SPEAR300 is not set
+CONFIG_MACH_SPEAR310=y
+# CONFIG_MACH_SPEAR320 is not set
+# CONFIG_BOARD_SPEAR300_EVB is not set
+CONFIG_BOARD_SPEAR310_EVB=y
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_LEGACY=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+CONFIG_ARM_L1_CACHE_SHIFT=5
+CONFIG_ARM_VIC=y
+CONFIG_ARM_VIC_NR=2
+CONFIG_COMMON_CLKDEV=y
+#
+# Bus support
+#
+CONFIG_ARM_AMBA=y
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+#
+# Kernel Features
+#
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0
+CONFIG_ZBOOT_ROM_BSS=0
+CONFIG_CMDLINE=""
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+#
+# Floating point emulation
+#
+#
+# At least one emulation must be selected
+#
+# CONFIG_FPE_NWFPE is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+CONFIG_BINFMT_MISC=y
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_NET is not set
+#
+# Device Drivers
+#
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=16384
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_MG_DISK is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_PHONE is not set
+#
+# Input device support
+#
+CONFIG_INPUT=y
+CONFIG_INPUT_FF_MEMLESS=y
+# CONFIG_INPUT_POLLDEV is not set
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_AMBAKMI is not set
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_AMBA_PL010 is not set
+CONFIG_SERIAL_AMBA_PL011=y
+CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+CONFIG_RAW_DRIVER=y
+CONFIG_MAX_RAW_DEVS=8192
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+#
+# Memory mapped GPIO expanders:
+#
+CONFIG_GPIO_PL061=y
+#
+# I2C GPIO expanders:
+#
+#
+# PCI GPIO expanders:
+#
+#
+# SPI GPIO expanders:
+#
+#
+# AC97 GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+# CONFIG_EXT2_FS_POSIX_ACL is not set
+CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+CONFIG_EXT3_FS_SECURITY=y
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+# CONFIG_INOTIFY is not set
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+CONFIG_AUTOFS4_FS=m
+# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
+# CONFIG_NTFS_FS is not set
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="utf8"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+CONFIG_NLS_ASCII=m
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+CONFIG_DEBUG_SPINLOCK=y
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+CONFIG_DEBUG_SPINLOCK_SLEEP=y
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+CONFIG_RCU_CPU_STALL_DETECTOR=y
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_BOOT_TRACER is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
+#
+# Library routines
+#
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+# CONFIG_CRC32 is not set
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/spear320_defconfig b/arch/arm/configs/spear320_defconfig
new file mode 100644
index 000000000000..2ae3c110a21a
--- /dev/null
+++ b/arch/arm/configs/spear320_defconfig
@@ -0,0 +1,775 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.32
+# Tue Mar 23 14:37:12 2010
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=17
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_MODVERSIONS=y
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_FREEZER is not set
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_BCMRING is not set
+CONFIG_PLAT_SPEAR=y
+CONFIG_ARCH_SPEAR3XX=y
+# CONFIG_ARCH_SPEAR6XX is not set
+# CONFIG_MACH_SPEAR300 is not set
+# CONFIG_MACH_SPEAR310 is not set
+CONFIG_MACH_SPEAR320=y
+# CONFIG_BOARD_SPEAR300_EVB is not set
+CONFIG_BOARD_SPEAR320_EVB=y
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_LEGACY=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+CONFIG_ARM_L1_CACHE_SHIFT=5
+CONFIG_ARM_VIC=y
+CONFIG_ARM_VIC_NR=2
+CONFIG_COMMON_CLKDEV=y
+#
+# Bus support
+#
+CONFIG_ARM_AMBA=y
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+#
+# Kernel Features
+#
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0
+CONFIG_ZBOOT_ROM_BSS=0
+CONFIG_CMDLINE=""
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+#
+# Floating point emulation
+#
+#
+# At least one emulation must be selected
+#
+# CONFIG_FPE_NWFPE is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+CONFIG_BINFMT_MISC=y
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_NET is not set
+#
+# Device Drivers
+#
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=16384
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_MG_DISK is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_PHONE is not set
+#
+# Input device support
+#
+CONFIG_INPUT=y
+CONFIG_INPUT_FF_MEMLESS=y
+# CONFIG_INPUT_POLLDEV is not set
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_AMBAKMI is not set
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_AMBA_PL010 is not set
+CONFIG_SERIAL_AMBA_PL011=y
+CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+CONFIG_RAW_DRIVER=y
+CONFIG_MAX_RAW_DEVS=8192
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+#
+# Memory mapped GPIO expanders:
+#
+CONFIG_GPIO_PL061=y
+#
+# I2C GPIO expanders:
+#
+#
+# PCI GPIO expanders:
+#
+#
+# SPI GPIO expanders:
+#
+#
+# AC97 GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+# CONFIG_EXT2_FS_POSIX_ACL is not set
+CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+CONFIG_EXT3_FS_SECURITY=y
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+# CONFIG_INOTIFY is not set
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+CONFIG_AUTOFS4_FS=m
+# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
+# CONFIG_NTFS_FS is not set
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="utf8"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+CONFIG_NLS_ASCII=m
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+CONFIG_DEBUG_SPINLOCK=y
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+CONFIG_DEBUG_SPINLOCK_SLEEP=y
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+CONFIG_RCU_CPU_STALL_DETECTOR=y
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_BOOT_TRACER is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
+#
+# Library routines
+#
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+# CONFIG_CRC32 is not set
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/spear600_defconfig b/arch/arm/configs/spear600_defconfig
new file mode 100644
index 000000000000..c85a02924ec5
--- /dev/null
+++ b/arch/arm/configs/spear600_defconfig
@@ -0,0 +1,760 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.32
+# Tue Mar 23 14:37:26 2010
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=17
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_MODVERSIONS=y
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_FREEZER is not set
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_BCMRING is not set
+CONFIG_PLAT_SPEAR=y
+# CONFIG_ARCH_SPEAR3XX is not set
+CONFIG_ARCH_SPEAR6XX=y
+# CONFIG_MACH_SPEAR300 is not set
+# CONFIG_MACH_SPEAR310 is not set
+# CONFIG_MACH_SPEAR320 is not set
+# CONFIG_BOARD_SPEAR300_EVB is not set
+CONFIG_MACH_SPEAR600=y
+CONFIG_BOARD_SPEAR600_EVB=y
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_LEGACY=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+CONFIG_ARM_L1_CACHE_SHIFT=5
+CONFIG_ARM_VIC=y
+CONFIG_ARM_VIC_NR=2
+CONFIG_COMMON_CLKDEV=y
+#
+# Bus support
+#
+CONFIG_ARM_AMBA=y
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+#
+# Kernel Features
+#
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0
+CONFIG_ZBOOT_ROM_BSS=0
+CONFIG_CMDLINE=""
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+#
+# Floating point emulation
+#
+#
+# At least one emulation must be selected
+#
+# CONFIG_FPE_NWFPE is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+CONFIG_BINFMT_MISC=y
+# CONFIG_ARTHUR is not set
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_NET is not set
+#
+# Device Drivers
+#
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=16384
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_PHONE is not set
+#
+# Input device support
+#
+CONFIG_INPUT=y
+CONFIG_INPUT_FF_MEMLESS=y
+# CONFIG_INPUT_POLLDEV is not set
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_AMBAKMI is not set
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_AMBA_PL010 is not set
+CONFIG_SERIAL_AMBA_PL011=y
+CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_R3964 is not set
+CONFIG_RAW_DRIVER=y
+CONFIG_MAX_RAW_DEVS=8192
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+#
+# Memory mapped GPIO expanders:
+#
+CONFIG_GPIO_PL061=y
+#
+# I2C GPIO expanders:
+#
+#
+# PCI GPIO expanders:
+#
+#
+# SPI GPIO expanders:
+#
+#
+# AC97 GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+# CONFIG_EXT2_FS_POSIX_ACL is not set
+CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+CONFIG_EXT3_FS_SECURITY=y
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+# CONFIG_INOTIFY is not set
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+CONFIG_AUTOFS4_FS=m
+# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
+# CONFIG_NTFS_FS is not set
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="utf8"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+CONFIG_NLS_ASCII=m
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+CONFIG_DEBUG_SPINLOCK=y
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+CONFIG_DEBUG_SPINLOCK_SLEEP=y
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+CONFIG_RCU_CPU_STALL_DETECTOR=y
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_BOOT_TRACER is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
+#
+# Library routines
+#
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+# CONFIG_CRC32 is not set
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/stamp9g20_defconfig b/arch/arm/configs/stamp9g20_defconfig
new file mode 100644
index 000000000000..06a8293c61ca
--- /dev/null
+++ b/arch/arm/configs/stamp9g20_defconfig
@@ -0,0 +1,1456 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.34-rc1
+# Wed Mar 17 16:38:03 2010
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_HAVE_PROC_CPU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_LZO=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+#
+# RCU Subsystem
+#
+# CONFIG_TREE_RCU is not set
+CONFIG_TREE_PREEMPT_RCU=y
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_RD_LZO=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_PERF_USE_VMALLOC=y
+#
+# Kernel Performance Events And Counters
+#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+# CONFIG_LBDAF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_DEADLINE is not set
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_SPIN_UNLOCK is not set
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_READ_UNLOCK is not set
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_WRITE_UNLOCK is not set
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
+CONFIG_FREEZER=y
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+CONFIG_ARCH_AT91=y
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_DOVE is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_NUC93X is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_BCMRING is not set
+# CONFIG_ARCH_U8500 is not set
+CONFIG_HAVE_AT91_USART3=y
+CONFIG_HAVE_AT91_USART4=y
+CONFIG_HAVE_AT91_USART5=y
+#
+# Atmel AT91 System-on-Chip
+#
+# CONFIG_ARCH_AT91RM9200 is not set
+# CONFIG_ARCH_AT91SAM9260 is not set
+# CONFIG_ARCH_AT91SAM9261 is not set
+# CONFIG_ARCH_AT91SAM9G10 is not set
+# CONFIG_ARCH_AT91SAM9263 is not set
+# CONFIG_ARCH_AT91SAM9RL is not set
+CONFIG_ARCH_AT91SAM9G20=y
+# CONFIG_ARCH_AT91SAM9G45 is not set
+# CONFIG_ARCH_AT91CAP9 is not set
+# CONFIG_ARCH_AT572D940HF is not set
+# CONFIG_ARCH_AT91X40 is not set
+CONFIG_AT91_PMC_UNIT=y
+#
+# AT91SAM9G20 Board Type
+#
+# CONFIG_MACH_AT91SAM9G20EK is not set
+# CONFIG_MACH_AT91SAM9G20EK_2MMC is not set
+# CONFIG_MACH_CPU9G20 is not set
+CONFIG_MACH_PORTUXG20=y
+CONFIG_MACH_STAMP9G20=y
+#
+# AT91 Board Options
+#
+#
+# AT91 Feature Selections
+#
+CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
+CONFIG_AT91_SLOW_CLOCK=y
+CONFIG_AT91_TIMER_HZ=100
+CONFIG_AT91_EARLY_DBGU=y
+# CONFIG_AT91_EARLY_USART0 is not set
+# CONFIG_AT91_EARLY_USART1 is not set
+# CONFIG_AT91_EARLY_USART2 is not set
+# CONFIG_AT91_EARLY_USART3 is not set
+# CONFIG_AT91_EARLY_USART4 is not set
+# CONFIG_AT91_EARLY_USART5 is not set
+#
+# Processor Type
+#
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_LEGACY=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+CONFIG_ARM_L1_CACHE_SHIFT=5
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=999999
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw"
+# CONFIG_XIP_KERNEL is not set
+CONFIG_KEXEC=y
+CONFIG_ATAGS_PROC=y
+#
+# CPU Power Management
+#
+CONFIG_CPU_IDLE=y
+CONFIG_CPU_IDLE_GOV_LADDER=y
+CONFIG_CPU_IDLE_GOV_MENU=y
+#
+# Floating point emulation
+#
+#
+# At least one emulation must be selected
+#
+# CONFIG_VFP is not set
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_APM_EMULATION is not set
+# CONFIG_PM_RUNTIME is not set
+CONFIG_PM_OPS=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+#
+# Device Drivers
+#
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+#
+# Self-contained MTD device drivers
+#
+CONFIG_MTD_DATAFLASH=y
+# CONFIG_MTD_DATAFLASH_WRITE_VERIFY is not set
+# CONFIG_MTD_DATAFLASH_OTP is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SST25L is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+CONFIG_MTD_NAND_ATMEL=y
+# CONFIG_MTD_NAND_ATMEL_ECC_HW is not set
+CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y
+# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_ONENAND is not set
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=8192
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+CONFIG_MACB=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
+# CONFIG_KS8851_MLL is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_WLAN is not set
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=320
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+CONFIG_SERIAL_ATMEL_PDC=y
+# CONFIG_SERIAL_ATMEL_TTYAT is not set
+# CONFIG_SERIAL_MAX3100 is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_TIMBERDALE is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+CONFIG_I2C_ALGOBIT=y
+#
+# I2C Hardware Bus support
+#
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_DESIGNWARE is not set
+CONFIG_I2C_GPIO=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_ATMEL=y
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
+# CONFIG_SPI_XILINX is not set
+# CONFIG_SPI_DESIGNWARE is not set
+#
+# SPI Protocol Masters
+#
+CONFIG_SPI_SPIDEV=y
+# CONFIG_SPI_TLE62X0 is not set
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_SYSFS=y
+#
+# Memory mapped GPIO expanders:
+#
+# CONFIG_GPIO_IT8761E is not set
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX7300 is not set
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_ADP5588 is not set
+#
+# PCI GPIO expanders:
+#
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_MC33880 is not set
+#
+# AC97 GPIO expanders:
+#
+CONFIG_W1=y
+#
+# 1-wire Bus Masters
+#
+# CONFIG_W1_MASTER_DS2490 is not set
+# CONFIG_W1_MASTER_DS2482 is not set
+# CONFIG_W1_MASTER_DS1WM is not set
+CONFIG_W1_MASTER_GPIO=y
+#
+# 1-wire Slaves
+#
+CONFIG_W1_SLAVE_THERM=y
+# CONFIG_W1_SLAVE_SMEM is not set
+CONFIG_W1_SLAVE_DS2431=y
+# CONFIG_W1_SLAVE_DS2433 is not set
+# CONFIG_W1_SLAVE_DS2760 is not set
+# CONFIG_W1_SLAVE_BQ27000 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+# CONFIG_MAX63XX_WATCHDOG is not set
+CONFIG_AT91SAM9X_WATCHDOG=y
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_HTC_I2CPLD is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_MC13783 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
+# CONFIG_AB4500_CORE is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+CONFIG_USB_GADGET=m
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+CONFIG_USB_GADGET_AT91=y
+CONFIG_USB_AT91=m
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_R8A66597 is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C_HSOTG is not set
+# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LANGWELL is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+CONFIG_USB_ZERO=m
+# CONFIG_USB_AUDIO is not set
+CONFIG_USB_ETH=m
+CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_ETH_EEM is not set
+# CONFIG_USB_GADGETFS is not set
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+# CONFIG_USB_MASS_STORAGE is not set
+CONFIG_USB_G_SERIAL=m
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+# CONFIG_USB_G_NOKIA is not set
+# CONFIG_USB_G_MULTI is not set
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_USB_ULPI is not set
+# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_AT91 is not set
+CONFIG_MMC_ATMELMCI=y
+# CONFIG_MMC_SPI is not set
+# CONFIG_MEMSTICK is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+#
+# LED drivers
+#
+# CONFIG_LEDS_PCA9532 is not set
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_GPIO_PLATFORM=y
+# CONFIG_LEDS_LP3944 is not set
+# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_DAC124S085 is not set
+# CONFIG_LEDS_BD2802 is not set
+# CONFIG_LEDS_LT3593 is not set
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+# CONFIG_LEDS_TRIGGER_GPIO is not set
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_AT91SAM9=y
+CONFIG_RTC_DRV_AT91SAM9_RTT=0
+CONFIG_RTC_DRV_AT91SAM9_GPBR=0
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+# CONFIG_MSDOS_FS is not set
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_SUMMARY=y
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_LOGFS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=y
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+CONFIG_NLS_ISO8859_15=y
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=y
+# CONFIG_DLM is not set
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_FRAME_POINTER=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_ARM_UNWIND is not set
+# CONFIG_DEBUG_USER is not set
+# CONFIG_OC_ETM is not set
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_DECOMPRESS_LZO=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/arm/include/asm/hardware/arm_timer.h b/arch/arm/include/asm/hardware/arm_timer.h
index 04be3bdf46b8..c0f4e7bf22de 100644
--- a/arch/arm/include/asm/hardware/arm_timer.h
+++ b/arch/arm/include/asm/hardware/arm_timer.h
@@ -1,21 +1,30 @@
 #ifndef __ASM_ARM_HARDWARE_ARM_TIMER_H
 #define __ASM_ARM_HARDWARE_ARM_TIMER_H
-#define TIMER_LOAD      0x00
+/*
-#define TIMER_VALUE     0x04
+ * ARM timer implementation, found in Integrator, Versatile and Realview
-#define TIMER_CTRL      0x08
+ * platforms.  Not all platforms support all registers and bits in these
-#define TIMER_CTRL_ONESHOT      (1 << 0)
+ * registers, so we mark them with A for Integrator AP, C for Integrator
-#define TIMER_CTRL_32BIT        (1 << 1)
+ * CP, V for Versatile and R for Realview.
-#define TIMER_CTRL_DIV1         (0 << 2)
+ *
-#define TIMER_CTRL_DIV16        (1 << 2)
+ * Integrator AP has 16-bit timers, Integrator CP, Versatile and Realview
-#define TIMER_CTRL_DIV256       (2 << 2)
+ * can have 16-bit or 32-bit selectable via a bit in the control register.
-#define TIMER_CTRL_IE           (1 << 5)        /* Interrupt Enable (versatile only) */
+ */
-#define TIMER_CTRL_PERIODIC     (1 << 6)
+#define TIMER_LOAD      0x00                    /* ACVR rw */
-#define TIMER_CTRL_ENABLE       (1 << 7)
+#define TIMER_VALUE     0x04                    /* ACVR ro */
+#define TIMER_CTRL      0x08                    /* ACVR rw */
+#define TIMER_CTRL_ONESHOT      (1 << 0)        /*  CVR */
+#define TIMER_CTRL_32BIT        (1 << 1)        /*  CVR */
+#define TIMER_CTRL_DIV1         (0 << 2)        /* ACVR */
+#define TIMER_CTRL_DIV16        (1 << 2)        /* ACVR */
+#define TIMER_CTRL_DIV256       (2 << 2)        /* ACVR */
+#define TIMER_CTRL_IE           (1 << 5)        /*   VR */
+#define TIMER_CTRL_PERIODIC     (1 << 6)        /* ACVR */
+#define TIMER_CTRL_ENABLE       (1 << 7)        /* ACVR */
-#define TIMER_INTCLR    0x0c
+#define TIMER_INTCLR    0x0c                    /* ACVR wo */
-#define TIMER_RIS       0x10
+#define TIMER_RIS       0x10                    /*  CVR ro */
-#define TIMER_MIS       0x14
+#define TIMER_MIS       0x14                    /*  CVR ro */
-#define TIMER_BGLOAD    0x18
+#define TIMER_BGLOAD    0x18                    /*  CVR rw */
 #endif
diff --git a/arch/arm/include/asm/hardware/icst.h b/arch/arm/include/asm/hardware/icst.h
new file mode 100644
index 000000000000..10382a3dcec9
--- /dev/null
+++ b/arch/arm/include/asm/hardware/icst.h
@@ -0,0 +1,59 @@
+/*
+ *  arch/arm/include/asm/hardware/icst.h
+ *
+ *  Copyright (C) 2003 Deep Blue Solutions, Ltd, All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  Support functions for calculating clocks/divisors for the ICST
+ *  clock generators.  See http://www.icst.com/ for more information
+ *  on these devices.
+ */
+#ifndef ASMARM_HARDWARE_ICST_H
+#define ASMARM_HARDWARE_ICST_H
+struct icst_params {
+        unsigned long   ref;
+        unsigned long   vco_max;        /* inclusive */
+        unsigned long   vco_min;        /* exclusive */
+        unsigned short  vd_min;         /* inclusive */
+        unsigned short  vd_max;         /* inclusive */
+        unsigned char   rd_min;         /* inclusive */
+        unsigned char   rd_max;         /* inclusive */
+        const unsigned char *s2div;     /* chip specific s2div array */
+        const unsigned char *idx2s;     /* chip specific idx2s array */
+};
+struct icst_vco {
+        unsigned short  v;
+        unsigned char   r;
+        unsigned char   s;
+};
+unsigned long icst_hz(const struct icst_params *p, struct icst_vco vco);
+struct icst_vco icst_hz_to_vco(const struct icst_params *p, unsigned long freq);
+/*
+ * ICST307 VCO frequency must be between 6MHz and 200MHz (3.3 or 5V).
+ * This frequency is pre-output divider.
+ */
+#define ICST307_VCO_MIN 6000000
+#define ICST307_VCO_MAX 200000000
+extern const unsigned char icst307_s2div[];
+extern const unsigned char icst307_idx2s[];
+/*
+ * ICST525 VCO frequency must be between 10MHz and 200MHz (3V) or 320MHz (5V).
+ * This frequency is pre-output divider.
+ */
+#define ICST525_VCO_MIN         10000000
+#define ICST525_VCO_MAX_3V      200000000
+#define ICST525_VCO_MAX_5V      320000000
+extern const unsigned char icst525_s2div[];
+extern const unsigned char icst525_idx2s[];
+#endif
diff --git a/arch/arm/include/asm/hardware/icst307.h b/arch/arm/include/asm/hardware/icst307.h
deleted file mode 100644
index 554f128a1046..000000000000
--- a/arch/arm/include/asm/hardware/icst307.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- *  arch/arm/include/asm/hardware/icst307.h
- *
- *  Copyright (C) 2003 Deep Blue Solutions, Ltd, All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  Support functions for calculating clocks/divisors for the ICS307
- *  clock generators.  See http://www.icst.com/ for more information
- *  on these devices.
- *
- *  This file is similar to the icst525.h file
- */
-#ifndef ASMARM_HARDWARE_ICST307_H
-#define ASMARM_HARDWARE_ICST307_H
-struct icst307_params {
-        unsigned long   ref;
-        unsigned long   vco_max;        /* inclusive */
-        unsigned short  vd_min;         /* inclusive */
-        unsigned short  vd_max;         /* inclusive */
-        unsigned char   rd_min;         /* inclusive */
-        unsigned char   rd_max;         /* inclusive */
-};
-struct icst307_vco {
-        unsigned short  v;
-        unsigned char   r;
-        unsigned char   s;
-};
-unsigned long icst307_khz(const struct icst307_params *p, struct icst307_vco vco);
-struct icst307_vco icst307_khz_to_vco(const struct icst307_params *p, unsigned long freq);
-struct icst307_vco icst307_ps_to_vco(const struct icst307_params *p, unsigned long period);
-#endif
diff --git a/arch/arm/include/asm/hardware/icst525.h b/arch/arm/include/asm/hardware/icst525.h
deleted file mode 100644
index 58f0dc43e2ed..000000000000
--- a/arch/arm/include/asm/hardware/icst525.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- *  arch/arm/include/asm/hardware/icst525.h
- *
- *  Copyright (C) 2003 Deep Blue Solutions, Ltd, All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  Support functions for calculating clocks/divisors for the ICST525
- *  clock generators.  See http://www.icst.com/ for more information
- *  on these devices.
- */
-#ifndef ASMARM_HARDWARE_ICST525_H
-#define ASMARM_HARDWARE_ICST525_H
-struct icst525_params {
-        unsigned long   ref;
-        unsigned long   vco_max;        /* inclusive */
-        unsigned short  vd_min;         /* inclusive */
-        unsigned short  vd_max;         /* inclusive */
-        unsigned char   rd_min;         /* inclusive */
-        unsigned char   rd_max;         /* inclusive */
-};
-struct icst525_vco {
-        unsigned short  v;
-        unsigned char   r;
-        unsigned char   s;
-};
-unsigned long icst525_khz(const struct icst525_params *p, struct icst525_vco vco);
-struct icst525_vco icst525_khz_to_vco(const struct icst525_params *p, unsigned long freq);
-struct icst525_vco icst525_ps_to_vco(const struct icst525_params *p, unsigned long period);
-#endif
diff --git a/arch/arm/include/asm/hardware/sp810.h b/arch/arm/include/asm/hardware/sp810.h
new file mode 100644
index 000000000000..a101f10bb5b1
--- /dev/null
+++ b/arch/arm/include/asm/hardware/sp810.h
@@ -0,0 +1,59 @@
+/*
+ * arch/arm/include/asm/hardware/sp810.h
+ *
+ * ARM PrimeXsys System Controller SP810 header file
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#ifndef __ASM_ARM_SP810_H
+#define __ASM_ARM_SP810_H
+#include <linux/io.h>
+/* sysctl registers offset */
+#define SCCTRL                  0x000
+#define SCSYSSTAT               0x004
+#define SCIMCTRL                0x008
+#define SCIMSTAT                0x00C
+#define SCXTALCTRL              0x010
+#define SCPLLCTRL               0x014
+#define SCPLLFCTRL              0x018
+#define SCPERCTRL0              0x01C
+#define SCPERCTRL1              0x020
+#define SCPEREN                 0x024
+#define SCPERDIS                0x028
+#define SCPERCLKEN              0x02C
+#define SCPERSTAT               0x030
+#define SCSYSID0                0xEE0
+#define SCSYSID1                0xEE4
+#define SCSYSID2                0xEE8
+#define SCSYSID3                0xEEC
+#define SCITCR                  0xF00
+#define SCITIR0                 0xF04
+#define SCITIR1                 0xF08
+#define SCITOR                  0xF0C
+#define SCCNTCTRL               0xF10
+#define SCCNTDATA               0xF14
+#define SCCNTSTEP               0xF18
+#define SCPERIPHID0             0xFE0
+#define SCPERIPHID1             0xFE4
+#define SCPERIPHID2             0xFE8
+#define SCPERIPHID3             0xFEC
+#define SCPCELLID0              0xFF0
+#define SCPCELLID1              0xFF4
+#define SCPCELLID2              0xFF8
+#define SCPCELLID3              0xFFC
+static inline void sysctl_soft_reset(void __iomem *base)
+{
+        /* writing any value to SCSYSSTAT reg will reset system */
+        writel(0, base + SCSYSSTAT);
+}
+#endif  /* __ASM_ARM_SP810_H */
diff --git a/arch/arm/include/asm/ioctls.h b/arch/arm/include/asm/ioctls.h
index a91d8a1523cf..7f0b6d13296a 100644
--- a/arch/arm/include/asm/ioctls.h
+++ b/arch/arm/include/asm/ioctls.h
@@ -53,6 +53,9 @@
 #define TIOCGPTN        _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
 #define TIOCSPTLCK      _IOW('T',0x31, int)  /* Lock/unlock Pty */
+#define TIOCGRS485      0x542E
+#define TIOCSRS485      0x542F
 #define FIONCLEX        0x5450  /* these numbers need to be adjusted. */
 #define FIOCLEX         0x5451
 #define FIOASYNC        0x5452
diff --git a/arch/arm/include/asm/pmu.h b/arch/arm/include/asm/pmu.h
index 2829b9f981a1..44bec1f02cb0 100644
--- a/arch/arm/include/asm/pmu.h
+++ b/arch/arm/include/asm/pmu.h
@@ -12,6 +12,11 @@
 #ifndef __ARM_PMU_H__
 #define __ARM_PMU_H__
+enum arm_pmu_type {
+        ARM_PMU_DEVICE_CPU      = 0,
+        ARM_NUM_PMU_DEVICES,
+};
 #ifdef CONFIG_CPU_HAS_PMU
 struct pmu_irqs {
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 8a5e8e9fe448..103976411a67 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -361,6 +361,19 @@ config MACH_CPU9G20
          Select this if you are using a Eukrea Electromatique's
          CPU9G20 Board <http://www.eukrea.com/>
+config MACH_PORTUXG20
+        bool "taskit PortuxG20"
+        help
+          Select this if you are using taskit's PortuxG20.
+          <http://www.taskit.de/en/>
+config MACH_STAMP9G20
+        bool "taskit Stamp9G20 CPU module"
+        help
+          Select this if you are using taskit's Stamp9G20 CPU module on its
+          evaluation board.
+          <http://www.taskit.de/en/>
 endif
 # ----------------------------------------------------------
diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
index 027dd570dcc3..1df9ee1ba040 100644
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -63,6 +63,8 @@ obj-$(CONFIG_MACH_AT91SAM9RLEK)	+= board-sam9rlek.o
 obj-$(CONFIG_MACH_AT91SAM9G20EK) += board-sam9g20ek.o
 obj-$(CONFIG_MACH_AT91SAM9G20EK_2MMC) += board-sam9g20ek-2slot-mmc.o
 obj-$(CONFIG_MACH_CPU9G20)      += board-cpu9krea.o
+obj-$(CONFIG_MACH_STAMP9G20)    += board-stamp9g20.o
+obj-$(CONFIG_MACH_PORTUXG20)    += board-stamp9g20.o
 # AT91SAM9G45 board-specific support
 obj-$(CONFIG_MACH_AT91SAM9G45EKES) += board-sam9m10g45ek.o
diff --git a/arch/arm/mach-at91/board-stamp9g20.c b/arch/arm/mach-at91/board-stamp9g20.c
new file mode 100644
index 000000000000..87958274290f
--- /dev/null
+++ b/arch/arm/mach-at91/board-stamp9g20.c
@@ -0,0 +1,315 @@
+/*
+ *  Copyright (C) 2010 Christian Glindkamp <christian.glindkamp@taskit.de>
+ *                     taskit GmbH
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#include <linux/mm.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/w1-gpio.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/board.h>
+#include <mach/at91sam9_smc.h>
+#include "sam9_smc.h"
+#include "generic.h"
+static void __init portuxg20_map_io(void)
+{
+        /* Initialize processor: 18.432 MHz crystal */
+        at91sam9260_initialize(18432000);
+        /* DGBU on ttyS0. (Rx & Tx only) */
+        at91_register_uart(0, 0, 0);
+        /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+        at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
+                                                | ATMEL_UART_DTR | ATMEL_UART_DSR
+                                                | ATMEL_UART_DCD | ATMEL_UART_RI);
+        /* USART1 on ttyS2. (Rx, Tx, CTS, RTS) */
+        at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS);
+        /* USART2 on ttyS3. (Rx, Tx, CTS, RTS) */
+        at91_register_uart(AT91SAM9260_ID_US2, 3, ATMEL_UART_CTS | ATMEL_UART_RTS);
+        /* USART4 on ttyS5. (Rx, Tx only) */
+        at91_register_uart(AT91SAM9260_ID_US4, 5, 0);
+        /* USART5 on ttyS6. (Rx, Tx only) */
+        at91_register_uart(AT91SAM9260_ID_US5, 6, 0);
+        /* set serial console to ttyS0 (ie, DBGU) */
+        at91_set_serial_console(0);
+}
+static void __init stamp9g20_map_io(void)
+{
+        /* Initialize processor: 18.432 MHz crystal */
+        at91sam9260_initialize(18432000);
+        /* DGBU on ttyS0. (Rx & Tx only) */
+        at91_register_uart(0, 0, 0);
+        /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+        at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
+                                                | ATMEL_UART_DTR | ATMEL_UART_DSR
+                                                | ATMEL_UART_DCD | ATMEL_UART_RI);
+        /* set serial console to ttyS0 (ie, DBGU) */
+        at91_set_serial_console(0);
+}
+static void __init init_irq(void)
+{
+        at91sam9260_init_interrupts(NULL);
+}
+/*
+ * NAND flash
+ */
+static struct atmel_nand_data __initdata nand_data = {
+        .ale            = 21,
+        .cle            = 22,
+        .rdy_pin        = AT91_PIN_PC13,
+        .enable_pin     = AT91_PIN_PC14,
+        .bus_width_16   = 0,
+};
+static struct sam9_smc_config __initdata nand_smc_config = {
+        .ncs_read_setup         = 0,
+        .nrd_setup              = 2,
+        .ncs_write_setup        = 0,
+        .nwe_setup              = 2,
+        .ncs_read_pulse         = 4,
+        .nrd_pulse              = 4,
+        .ncs_write_pulse        = 4,
+        .nwe_pulse              = 4,
+        .read_cycle             = 7,
+        .write_cycle            = 7,
+        .mode                   = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_DBW_8,
+        .tdf_cycles             = 3,
+};
+static void __init add_device_nand(void)
+{
+        /* configure chip-select 3 (NAND) */
+        sam9_smc_configure(3, &nand_smc_config);
+        at91_add_device_nand(&nand_data);
+}
+/*
+ * MCI (SD/MMC)
+ * det_pin, wp_pin and vcc_pin are not connected
+ */
+#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
+static struct mci_platform_data __initdata mmc_data = {
+        .slot[0] = {
+                .bus_width      = 4,
+        },
+};
+#else
+static struct at91_mmc_data __initdata mmc_data = {
+        .slot_b         = 0,
+        .wire4          = 1,
+};
+#endif
+/*
+ * USB Host port
+ */
+static struct at91_usbh_data __initdata usbh_data = {
+        .ports          = 2,
+};
+/*
+ * USB Device port
+ */
+static struct at91_udc_data __initdata portuxg20_udc_data = {
+        .vbus_pin       = AT91_PIN_PC7,
+        .pullup_pin     = 0,            /* pull-up driven by UDC */
+};
+static struct at91_udc_data __initdata stamp9g20_udc_data = {
+        .vbus_pin       = AT91_PIN_PA22,
+        .pullup_pin     = 0,            /* pull-up driven by UDC */
+};
+/*
+ * MACB Ethernet device
+ */
+static struct at91_eth_data __initdata macb_data = {
+        .phy_irq_pin    = AT91_PIN_PA28,
+        .is_rmii        = 1,
+};
+/*
+ * LEDs
+ */
+static struct gpio_led portuxg20_leds[] = {
+        {
+                .name                   = "LED2",
+                .gpio                   = AT91_PIN_PC5,
+                .default_trigger        = "none",
+        }, {
+                .name                   = "LED3",
+                .gpio                   = AT91_PIN_PC4,
+                .default_trigger        = "none",
+        }, {
+                .name                   = "LED4",
+                .gpio                   = AT91_PIN_PC10,
+                .default_trigger        = "heartbeat",
+        }
+};
+static struct gpio_led stamp9g20_leds[] = {
+        {
+                .name                   = "D8",
+                .gpio                   = AT91_PIN_PB18,
+                .active_low             = 1,
+                .default_trigger        = "none",
+        }, {
+                .name                   = "D9",
+                .gpio                   = AT91_PIN_PB19,
+                .active_low             = 1,
+                .default_trigger        = "none",
+        }, {
+                .name                   = "D10",
+                .gpio                   = AT91_PIN_PB20,
+                .active_low             = 1,
+                .default_trigger        = "heartbeat",
+        }
+};
+/*
+ * SPI devices
+ */
+static struct spi_board_info portuxg20_spi_devices[] = {
+        {
+                .modalias       = "spidev",
+                .chip_select    = 0,
+                .max_speed_hz   = 1 * 1000 * 1000,
+                .bus_num        = 0,
+        }, {
+                .modalias       = "spidev",
+                .chip_select    = 0,
+                .max_speed_hz   = 1 * 1000 * 1000,
+                .bus_num        = 1,
+        },
+};
+/*
+ * Dallas 1-Wire
+ */
+static struct w1_gpio_platform_data w1_gpio_pdata = {
+        .pin            = AT91_PIN_PA29,
+        .is_open_drain  = 1,
+};
+static struct platform_device w1_device = {
+        .name                   = "w1-gpio",
+        .id                     = -1,
+        .dev.platform_data      = &w1_gpio_pdata,
+};
+void add_w1(void)
+{
+        at91_set_GPIO_periph(w1_gpio_pdata.pin, 1);
+        at91_set_multi_drive(w1_gpio_pdata.pin, 1);
+        platform_device_register(&w1_device);
+}
+static void __init generic_board_init(void)
+{
+        /* Serial */
+        at91_add_device_serial();
+        /* NAND */
+        add_device_nand();
+        /* MMC */
+#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
+        at91_add_device_mci(0, &mmc_data);
+#else
+        at91_add_device_mmc(0, &mmc_data);
+#endif
+        /* USB Host */
+        at91_add_device_usbh(&usbh_data);
+        /* Ethernet */
+        at91_add_device_eth(&macb_data);
+        /* I2C */
+        at91_add_device_i2c(NULL, 0);
+        /* W1 */
+        add_w1();
+}
+static void __init portuxg20_board_init(void)
+{
+        generic_board_init();
+        /* SPI */
+        at91_add_device_spi(portuxg20_spi_devices, ARRAY_SIZE(portuxg20_spi_devices));
+        /* USB Device */
+        at91_add_device_udc(&portuxg20_udc_data);
+        /* LEDs */
+        at91_gpio_leds(portuxg20_leds, ARRAY_SIZE(portuxg20_leds));
+}
+static void __init stamp9g20_board_init(void)
+{
+        generic_board_init();
+        /* USB Device */
+        at91_add_device_udc(&stamp9g20_udc_data);
+        /* LEDs */
+        at91_gpio_leds(stamp9g20_leds, ARRAY_SIZE(stamp9g20_leds));
+}
+MACHINE_START(PORTUXG20, "taskit PortuxG20")
+        /* Maintainer: taskit GmbH */
+        .phys_io        = AT91_BASE_SYS,
+        .io_pg_offst    = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
+        .boot_params    = AT91_SDRAM_BASE + 0x100,
+        .timer          = &at91sam926x_timer,
+        .map_io         = portuxg20_map_io,
+        .init_irq       = init_irq,
+        .init_machine   = portuxg20_board_init,
+MACHINE_END
+MACHINE_START(STAMP9G20, "taskit Stamp9G20")
+        /* Maintainer: taskit GmbH */
+        .phys_io        = AT91_BASE_SYS,
+        .io_pg_offst    = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
+        .boot_params    = AT91_SDRAM_BASE + 0x100,
+        .timer          = &at91sam926x_timer,
+        .map_io         = stamp9g20_map_io,
+        .init_irq       = init_irq,
+        .init_machine   = stamp9g20_board_init,
+MACHINE_END
diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h
index ceaec6c16eb2..df2ed848c9f8 100644
--- a/arch/arm/mach-at91/include/mach/board.h
+++ b/arch/arm/mach-at91/include/mach/board.h
@@ -39,6 +39,7 @@
 #include <linux/usb/atmel_usba_udc.h>
 #include <linux/atmel-mci.h>
 #include <sound/atmel-ac97c.h>
+#include <linux/serial.h>
 /* USB Device */
 struct at91_udc_data {
@@ -143,9 +144,10 @@ extern struct platform_device *atmel_default_console_device;
 extern void __init __deprecated at91_init_serial(struct at91_uart_config *config);
 struct atmel_uart_data {
-        short           use_dma_tx;     /* use transmit DMA? */
+        short                   use_dma_tx;     /* use transmit DMA? */
-        short           use_dma_rx;     /* use receive DMA? */
+        short                   use_dma_rx;     /* use receive DMA? */
-        void __iomem    *regs;          /* virtual base address, if any */
+        void __iomem            *regs;          /* virt. base address, if any */
+        struct serial_rs485     rs485;          /* rs485 settings */
 };
 extern void __init at91_add_device_serial(void);
diff --git a/arch/arm/mach-at91/include/mach/cpu.h b/arch/arm/mach-at91/include/mach/cpu.h
index 5a0650101d45..833659d1200a 100644
--- a/arch/arm/mach-at91/include/mach/cpu.h
+++ b/arch/arm/mach-at91/include/mach/cpu.h
@@ -21,7 +21,7 @@
 #define ARCH_ID_AT91SAM9260     0x019803a0
 #define ARCH_ID_AT91SAM9261     0x019703a0
 #define ARCH_ID_AT91SAM9263     0x019607a0
-#define ARCH_ID_AT91SAM9G10     0x819903a0
+#define ARCH_ID_AT91SAM9G10     0x019903a0
 #define ARCH_ID_AT91SAM9G20     0x019905a0
 #define ARCH_ID_AT91SAM9RL64    0x019b03a0
 #define ARCH_ID_AT91SAM9G45     0x819b05a0
@@ -108,7 +108,7 @@ static inline unsigned long at91cap9_rev_identify(void)
 #endif
 #ifdef CONFIG_ARCH_AT91SAM9G10
-#define cpu_is_at91sam9g10()    (at91_cpu_identify() == ARCH_ID_AT91SAM9G10)
+#define cpu_is_at91sam9g10()    ((at91_cpu_identify() & ~AT91_CIDR_EXT) == ARCH_ID_AT91SAM9G10)
 #else
 #define cpu_is_at91sam9g10()    (0)
 #endif
diff --git a/arch/arm/mach-at91/include/mach/system.h b/arch/arm/mach-at91/include/mach/system.h
index 5268af3933c2..c80e090b3670 100644
--- a/arch/arm/mach-at91/include/mach/system.h
+++ b/arch/arm/mach-at91/include/mach/system.h
@@ -24,21 +24,24 @@
 #include <mach/hardware.h>
 #include <mach/at91_st.h>
 #include <mach/at91_dbgu.h>
+#include <mach/at91_pmc.h>
 static inline void arch_idle(void)
 {
+#ifndef CONFIG_DEBUG_KERNEL
        /*
         * Disable the processor clock.  The processor will be automatically
         * re-enabled by an interrupt or by a reset.
         */
-//      at91_sys_write(AT91_PMC_SCDR, AT91_PMC_PCK);
+        at91_sys_write(AT91_PMC_SCDR, AT91_PMC_PCK);
+#else
        /*
         * Set the processor (CP15) into 'Wait for Interrupt' mode.
         * Unlike disabling the processor clock via the PMC (above)
         *  this allows the processor to be woken via JTAG.
         */
        cpu_do_idle();
+#endif
 }
 void (*at91_arch_reset)(void);
diff --git a/arch/arm/mach-bcmring/arch.c b/arch/arm/mach-bcmring/arch.c
index 53dd2a9eecf9..2f139196d63d 100644
--- a/arch/arm/mach-bcmring/arch.c
+++ b/arch/arm/mach-bcmring/arch.c
@@ -29,6 +29,7 @@
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/mach/time.h>
+#include <asm/pmu.h>
 #include <asm/mach/arch.h>
 #include <mach/dma.h>
@@ -85,8 +86,23 @@ static struct platform_device nand_device = {
        .num_resources  = ARRAY_SIZE(nand_resource),
 };
+static struct resource pmu_resource = {
+        .start  = IRQ_PMUIRQ,
+        .end    = IRQ_PMUIRQ,
+        .flags  = IORESOURCE_IRQ,
+};
+static struct platform_device pmu_device = {
+        .name           = "arm-pmu",
+        .id             = ARM_PMU_DEVICE_CPU,
+        .resource       = &pmu_resource,
+        .num_resources  = 1,
+};
 static struct platform_device *devices[] __initdata = {
        &nand_device,
+        &pmu_device,
 };
 /****************************************************************************
diff --git a/arch/arm/mach-ep93xx/adssphere.c b/arch/arm/mach-ep93xx/adssphere.c
index caf6d5154aec..3a1a855bfdca 100644
--- a/arch/arm/mach-ep93xx/adssphere.c
+++ b/arch/arm/mach-ep93xx/adssphere.c
@@ -41,7 +41,7 @@ static struct platform_device adssphere_flash = {
        .resource       = &adssphere_flash_resource,
 };
-static struct ep93xx_eth_data adssphere_eth_data = {
+static struct ep93xx_eth_data __initdata adssphere_eth_data = {
        .phy_id         = 1,
 };
diff --git a/arch/arm/mach-ep93xx/clock.c b/arch/arm/mach-ep93xx/clock.c
index 5f80092b6ace..e29bdef9b2e2 100644
--- a/arch/arm/mach-ep93xx/clock.c
+++ b/arch/arm/mach-ep93xx/clock.c
@@ -96,6 +96,10 @@ static struct clk clk_keypad = {
        .enable_mask    = EP93XX_SYSCON_KEYTCHCLKDIV_KEN,
        .set_rate       = set_keytchclk_rate,
 };
+static struct clk clk_spi = {
+        .parent         = &clk_xtali,
+        .rate           = EP93XX_EXT_CLK_RATE,
+};
 static struct clk clk_pwm = {
        .parent         = &clk_xtali,
        .rate           = EP93XX_EXT_CLK_RATE,
@@ -186,6 +190,7 @@ static struct clk_lookup clocks[] = {
        INIT_CK("ep93xx-ohci",          NULL,           &clk_usb_host),
        INIT_CK("ep93xx-keypad",        NULL,           &clk_keypad),
        INIT_CK("ep93xx-fb",            NULL,           &clk_video),
+        INIT_CK("ep93xx-spi.0",         NULL,           &clk_spi),
        INIT_CK(NULL,                   "pwm_clk",      &clk_pwm),
        INIT_CK(NULL,                   "m2p0",         &clk_m2p0),
        INIT_CK(NULL,                   "m2p1",         &clk_m2p1),
@@ -473,6 +478,14 @@ static int __init ep93xx_clock_init(void)
        /* Initialize the pll2 derived clocks */
        clk_usb_host.rate = clk_pll2.rate / (((value >> 28) & 0xf) + 1);
+        /*
+         * EP93xx SSP clock rate was doubled in version E2. For more information
+         * see:
+         *     http://www.cirrus.com/en/pubs/appNote/AN273REV4.pdf
+         */
+        if (ep93xx_chip_revision() < EP93XX_CHIP_REV_E2)
+                clk_spi.rate /= 2;
        pr_info("PLL1 running at %ld MHz, PLL2 at %ld MHz\n",
                clk_pll1.rate / 1000000, clk_pll2.rate / 1000000);
        pr_info("FCLK %ld MHz, HCLK %ld MHz, PCLK %ld MHz\n",
diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index 90fb591cbffa..9092677f63eb 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -31,10 +31,12 @@
 #include <linux/amba/serial.h>
 #include <linux/i2c.h>
 #include <linux/i2c-gpio.h>
+#include <linux/spi/spi.h>
 #include <mach/hardware.h>
 #include <mach/fb.h>
 #include <mach/ep93xx_keypad.h>
+#include <mach/ep93xx_spi.h>
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
@@ -222,6 +224,20 @@ void ep93xx_devcfg_set_clear(unsigned int set_bits, unsigned int clear_bits)
 }
 EXPORT_SYMBOL(ep93xx_devcfg_set_clear);
+/**
+ * ep93xx_chip_revision() - returns the EP93xx chip revision
+ *
+ * See <mach/platform.h> for more information.
+ */
+unsigned int ep93xx_chip_revision(void)
+{
+        unsigned int v;
+        v = __raw_readl(EP93XX_SYSCON_SYSCFG);
+        v &= EP93XX_SYSCON_SYSCFG_REV_MASK;
+        v >>= EP93XX_SYSCON_SYSCFG_REV_SHIFT;
+        return v;
+}
 /*************************************************************************
 * EP93xx peripheral handling
@@ -330,6 +346,10 @@ static struct platform_device ep93xx_ohci_device = {
        .resource       = ep93xx_ohci_resources,
 };
+/*************************************************************************
+ * EP93xx ethernet peripheral handling
+ *************************************************************************/
 static struct ep93xx_eth_data ep93xx_eth_data;
 static struct resource ep93xx_eth_resource[] = {
@@ -354,6 +374,12 @@ static struct platform_device ep93xx_eth_device = {
        .resource       = ep93xx_eth_resource,
 };
+/**
+ * ep93xx_register_eth - Register the built-in ethernet platform device.
+ * @data:       platform specific ethernet configuration (__initdata)
+ * @copy_addr:  flag indicating that the MAC address should be copied
+ *              from the IndAd registers (as programmed by the bootloader)
+ */
 void __init ep93xx_register_eth(struct ep93xx_eth_data *data, int copy_addr)
 {
        if (copy_addr)
@@ -370,11 +396,19 @@ void __init ep93xx_register_eth(struct ep93xx_eth_data *data, int copy_addr)
 static struct i2c_gpio_platform_data ep93xx_i2c_data;
 static struct platform_device ep93xx_i2c_device = {
-        .name                   = "i2c-gpio",
+        .name           = "i2c-gpio",
-        .id                     = 0,
+        .id             = 0,
-        .dev.platform_data      = &ep93xx_i2c_data,
+        .dev            = {
+                .platform_data  = &ep93xx_i2c_data,
+        },
 };
+/**
+ * ep93xx_register_i2c - Register the i2c platform device.
+ * @data:       platform specific i2c-gpio configuration (__initdata)
+ * @devices:    platform specific i2c bus device information (__initdata)
+ * @num:        the number of devices on the i2c bus
+ */
 void __init ep93xx_register_i2c(struct i2c_gpio_platform_data *data,
                                struct i2c_board_info *devices, int num)
 {
@@ -398,17 +432,67 @@ void __init ep93xx_register_i2c(struct i2c_gpio_platform_data *data,
        platform_device_register(&ep93xx_i2c_device);
 }
+/*************************************************************************
+ * EP93xx SPI peripheral handling
+ *************************************************************************/
+static struct ep93xx_spi_info ep93xx_spi_master_data;
+static struct resource ep93xx_spi_resources[] = {
+        {
+                .start  = EP93XX_SPI_PHYS_BASE,
+                .end    = EP93XX_SPI_PHYS_BASE + 0x18 - 1,
+                .flags  = IORESOURCE_MEM,
+        },
+        {
+                .start  = IRQ_EP93XX_SSP,
+                .end    = IRQ_EP93XX_SSP,
+                .flags  = IORESOURCE_IRQ,
+        },
+};
+static struct platform_device ep93xx_spi_device = {
+        .name           = "ep93xx-spi",
+        .id             = 0,
+        .dev            = {
+                .platform_data = &ep93xx_spi_master_data,
+        },
+        .num_resources  = ARRAY_SIZE(ep93xx_spi_resources),
+        .resource       = ep93xx_spi_resources,
+};
+/**
+ * ep93xx_register_spi() - registers spi platform device
+ * @info: ep93xx board specific spi master info (__initdata)
+ * @devices: SPI devices to register (__initdata)
+ * @num: number of SPI devices to register
+ *
+ * This function registers platform device for the EP93xx SPI controller and
+ * also makes sure that SPI pins are muxed so that I2S is not using those pins.
+ */
+void __init ep93xx_register_spi(struct ep93xx_spi_info *info,
+                                struct spi_board_info *devices, int num)
+{
+        /*
+         * When SPI is used, we need to make sure that I2S is muxed off from
+         * SPI pins.
+         */
+        ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_I2SONSSP);
+        ep93xx_spi_master_data = *info;
+        spi_register_board_info(devices, num);
+        platform_device_register(&ep93xx_spi_device);
+}
 /*************************************************************************
 * EP93xx LEDs
 *************************************************************************/
 static struct gpio_led ep93xx_led_pins[] = {
        {
-                .name                   = "platform:grled",
+                .name   = "platform:grled",
-                .gpio                   = EP93XX_GPIO_LINE_GRLED,
+                .gpio   = EP93XX_GPIO_LINE_GRLED,
        }, {
-                .name                   = "platform:rdled",
+                .name   = "platform:rdled",
-                .gpio                   = EP93XX_GPIO_LINE_RDLED,
+                .gpio   = EP93XX_GPIO_LINE_RDLED,
        },
 };
@@ -528,7 +612,7 @@ static struct platform_device ep93xx_fb_device = {
        .name                   = "ep93xx-fb",
        .id                     = -1,
        .dev                    = {
-                .platform_data  = &ep93xxfb_data,
+                .platform_data          = &ep93xxfb_data,
                .coherent_dma_mask      = DMA_BIT_MASK(32),
                .dma_mask               = &ep93xx_fb_device.dev.coherent_dma_mask,
        },
@@ -536,6 +620,10 @@ static struct platform_device ep93xx_fb_device = {
        .resource               = ep93xx_fb_resource,
 };
+/**
+ * ep93xx_register_fb - Register the framebuffer platform device.
+ * @data:       platform specific framebuffer configuration (__initdata)
+ */
 void __init ep93xx_register_fb(struct ep93xxfb_mach_info *data)
 {
        ep93xxfb_data = *data;
@@ -546,6 +634,8 @@ void __init ep93xx_register_fb(struct ep93xxfb_mach_info *data)
 /*************************************************************************
 * EP93xx matrix keypad peripheral handling
 *************************************************************************/
+static struct ep93xx_keypad_platform_data ep93xx_keypad_data;
 static struct resource ep93xx_keypad_resource[] = {
        {
                .start  = EP93XX_KEY_MATRIX_PHYS_BASE,
@@ -559,15 +649,22 @@ static struct resource ep93xx_keypad_resource[] = {
 };
 static struct platform_device ep93xx_keypad_device = {
-        .name                   = "ep93xx-keypad",
+        .name           = "ep93xx-keypad",
-        .id                     = -1,
+        .id             = -1,
-        .num_resources          = ARRAY_SIZE(ep93xx_keypad_resource),
+        .dev            = {
-        .resource               = ep93xx_keypad_resource,
+                .platform_data  = &ep93xx_keypad_data,
+        },
+        .num_resources  = ARRAY_SIZE(ep93xx_keypad_resource),
+        .resource       = ep93xx_keypad_resource,
 };
+/**
+ * ep93xx_register_keypad - Register the keypad platform device.
+ * @data:       platform specific keypad configuration (__initdata)
+ */
 void __init ep93xx_register_keypad(struct ep93xx_keypad_platform_data *data)
 {
-        ep93xx_keypad_device.dev.platform_data = data;
+        ep93xx_keypad_data = *data;
        platform_device_register(&ep93xx_keypad_device);
 }
diff --git a/arch/arm/mach-ep93xx/edb93xx.c b/arch/arm/mach-ep93xx/edb93xx.c
index d22d67ac8b99..3884182cd362 100644
--- a/arch/arm/mach-ep93xx/edb93xx.c
+++ b/arch/arm/mach-ep93xx/edb93xx.c
@@ -74,7 +74,7 @@ static void __init edb93xx_register_flash(void)
        }
 }
-static struct ep93xx_eth_data edb93xx_eth_data = {
+static struct ep93xx_eth_data __initdata edb93xx_eth_data = {
        .phy_id         = 1,
 };
@@ -82,7 +82,7 @@ static struct ep93xx_eth_data edb93xx_eth_data = {
 /*************************************************************************
 * EDB93xx i2c peripheral handling
 *************************************************************************/
-static struct i2c_gpio_platform_data edb93xx_i2c_gpio_data = {
+static struct i2c_gpio_platform_data __initdata edb93xx_i2c_gpio_data = {
        .sda_pin                = EP93XX_GPIO_LINE_EEDAT,
        .sda_is_open_drain      = 0,
        .scl_pin                = EP93XX_GPIO_LINE_EECLK,
diff --git a/arch/arm/mach-ep93xx/gesbc9312.c b/arch/arm/mach-ep93xx/gesbc9312.c
index 3da7ca816d19..a809618e9f05 100644
--- a/arch/arm/mach-ep93xx/gesbc9312.c
+++ b/arch/arm/mach-ep93xx/gesbc9312.c
@@ -41,7 +41,7 @@ static struct platform_device gesbc9312_flash = {
        .resource       = &gesbc9312_flash_resource,
 };
-static struct ep93xx_eth_data gesbc9312_eth_data = {
+static struct ep93xx_eth_data __initdata gesbc9312_eth_data = {
        .phy_id         = 1,
 };
diff --git a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
index 93e2ecc79ceb..b1e096f0c2d2 100644
--- a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
+++ b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
@@ -106,6 +106,7 @@
 #define EP93XX_AAC_BASE                 EP93XX_APB_IOMEM(0x00080000)
+#define EP93XX_SPI_PHYS_BASE            EP93XX_APB_PHYS(0x000a0000)
 #define EP93XX_SPI_BASE                 EP93XX_APB_IOMEM(0x000a0000)
 #define EP93XX_IRDA_BASE                EP93XX_APB_IOMEM(0x000b0000)
diff --git a/arch/arm/mach-ep93xx/include/mach/platform.h b/arch/arm/mach-ep93xx/include/mach/platform.h
index c6dc14dbca18..9a4413dd44bb 100644
--- a/arch/arm/mach-ep93xx/include/mach/platform.h
+++ b/arch/arm/mach-ep93xx/include/mach/platform.h
@@ -6,9 +6,11 @@
 struct i2c_gpio_platform_data;
 struct i2c_board_info;
+struct spi_board_info;
 struct platform_device;
 struct ep93xxfb_mach_info;
 struct ep93xx_keypad_platform_data;
+struct ep93xx_spi_info;
 struct ep93xx_eth_data
 {
@@ -33,9 +35,19 @@ static inline void ep93xx_devcfg_clear_bits(unsigned int bits)
        ep93xx_devcfg_set_clear(0x00, bits);
 }
+#define EP93XX_CHIP_REV_D0      3
+#define EP93XX_CHIP_REV_D1      4
+#define EP93XX_CHIP_REV_E0      5
+#define EP93XX_CHIP_REV_E1      6
+#define EP93XX_CHIP_REV_E2      7
+unsigned int ep93xx_chip_revision(void);
 void ep93xx_register_eth(struct ep93xx_eth_data *data, int copy_addr);
 void ep93xx_register_i2c(struct i2c_gpio_platform_data *data,
                         struct i2c_board_info *devices, int num);
+void ep93xx_register_spi(struct ep93xx_spi_info *info,
+                         struct spi_board_info *devices, int num);
 void ep93xx_register_fb(struct ep93xxfb_mach_info *data);
 void ep93xx_register_pwm(int pwm0, int pwm1);
 int ep93xx_pwm_acquire_gpio(struct platform_device *pdev);
diff --git a/arch/arm/mach-ep93xx/micro9.c b/arch/arm/mach-ep93xx/micro9.c
index c33360e82868..1cc911b4efa6 100644
--- a/arch/arm/mach-ep93xx/micro9.c
+++ b/arch/arm/mach-ep93xx/micro9.c
@@ -80,7 +80,7 @@ static void __init micro9_register_flash(void)
 /*************************************************************************
 * Micro9 Ethernet
 *************************************************************************/
-static struct ep93xx_eth_data micro9_eth_data = {
+static struct ep93xx_eth_data __initdata micro9_eth_data = {
        .phy_id         = 0x1f,
 };
diff --git a/arch/arm/mach-ep93xx/simone.c b/arch/arm/mach-ep93xx/simone.c
index cd93990f1b99..388aec95f60e 100644
--- a/arch/arm/mach-ep93xx/simone.c
+++ b/arch/arm/mach-ep93xx/simone.c
@@ -49,17 +49,17 @@ static struct platform_device simone_flash = {
        },
 };
-static struct ep93xx_eth_data simone_eth_data = {
+static struct ep93xx_eth_data __initdata simone_eth_data = {
        .phy_id         = 1,
 };
-static struct ep93xxfb_mach_info simone_fb_info = {
+static struct ep93xxfb_mach_info __initdata simone_fb_info = {
        .num_modes      = EP93XXFB_USE_MODEDB,
        .bpp            = 16,
        .flags          = EP93XXFB_USE_SDCSN0 | EP93XXFB_PCLK_FALLING,
 };
-static struct i2c_gpio_platform_data simone_i2c_gpio_data = {
+static struct i2c_gpio_platform_data __initdata simone_i2c_gpio_data = {
        .sda_pin                = EP93XX_GPIO_LINE_EEDAT,
        .sda_is_open_drain      = 0,
        .scl_pin                = EP93XX_GPIO_LINE_EECLK,
diff --git a/arch/arm/mach-ep93xx/snappercl15.c b/arch/arm/mach-ep93xx/snappercl15.c
index 51134b0382ca..38deaee40397 100644
--- a/arch/arm/mach-ep93xx/snappercl15.c
+++ b/arch/arm/mach-ep93xx/snappercl15.c
@@ -125,11 +125,11 @@ static struct platform_device snappercl15_nand_device = {
        .num_resources          = ARRAY_SIZE(snappercl15_nand_resource),
 };
-static struct ep93xx_eth_data snappercl15_eth_data = {
+static struct ep93xx_eth_data __initdata snappercl15_eth_data = {
        .phy_id                 = 1,
 };
-static struct i2c_gpio_platform_data snappercl15_i2c_gpio_data = {
+static struct i2c_gpio_platform_data __initdata snappercl15_i2c_gpio_data = {
        .sda_pin                = EP93XX_GPIO_LINE_EEDAT,
        .sda_is_open_drain      = 0,
        .scl_pin                = EP93XX_GPIO_LINE_EECLK,
@@ -145,7 +145,7 @@ static struct i2c_board_info __initdata snappercl15_i2c_data[] = {
        },
 };
-static struct ep93xxfb_mach_info snappercl15_fb_info = {
+static struct ep93xxfb_mach_info __initdata snappercl15_fb_info = {
        .num_modes              = EP93XXFB_USE_MODEDB,
        .bpp                    = 16,
 };
diff --git a/arch/arm/mach-ep93xx/ts72xx.c b/arch/arm/mach-ep93xx/ts72xx.c
index fac1ec7a60fb..9553031900b0 100644
--- a/arch/arm/mach-ep93xx/ts72xx.c
+++ b/arch/arm/mach-ep93xx/ts72xx.c
@@ -186,7 +186,7 @@ static struct platform_device ts72xx_wdt_device = {
        .resource       = ts72xx_wdt_resources,
 };
-static struct ep93xx_eth_data ts72xx_eth_data = {
+static struct ep93xx_eth_data __initdata ts72xx_eth_data = {
        .phy_id         = 1,
 };
diff --git a/arch/arm/mach-integrator/Kconfig b/arch/arm/mach-integrator/Kconfig
index df97d16390e3..27db275b367c 100644
--- a/arch/arm/mach-integrator/Kconfig
+++ b/arch/arm/mach-integrator/Kconfig
@@ -11,6 +11,7 @@ config ARCH_INTEGRATOR_AP
 config ARCH_INTEGRATOR_CP
        bool "Support Integrator/CP platform"
        select ARCH_CINTEGRATOR
+        select ARM_TIMER_SP804
        help
          Include support for the ARM(R) Integrator CP platform.
diff --git a/arch/arm/mach-integrator/Makefile b/arch/arm/mach-integrator/Makefile
index 6a5ef8d30b10..ebeef966e1f5 100644
--- a/arch/arm/mach-integrator/Makefile
+++ b/arch/arm/mach-integrator/Makefile
@@ -4,7 +4,7 @@
 # Object file lists.
-obj-y                                   := clock.o core.o lm.o
+obj-y                                   := core.o lm.o
 obj-$(CONFIG_ARCH_INTEGRATOR_AP)        += integrator_ap.o
 obj-$(CONFIG_ARCH_INTEGRATOR_CP)        += integrator_cp.o
diff --git a/arch/arm/mach-integrator/common.h b/arch/arm/mach-integrator/common.h
deleted file mode 100644
index 609c49de3d47..000000000000
--- a/arch/arm/mach-integrator/common.h
+++ /dev/null
@@ -1,2 +0,0 @@
-extern void integrator_time_init(unsigned long, unsigned int);
-extern unsigned long integrator_gettimeoffset(void);
diff --git a/arch/arm/mach-integrator/core.c b/arch/arm/mach-integrator/core.c
index 8b390e36ba69..b02cfc06e0ae 100644
--- a/arch/arm/mach-integrator/core.c
+++ b/arch/arm/mach-integrator/core.c
@@ -24,15 +24,13 @@
 #include <asm/clkdev.h>
 #include <mach/clkdev.h>
 #include <mach/hardware.h>
+#include <mach/platform.h>
 #include <asm/irq.h>
-#include <asm/hardware/arm_timer.h>
 #include <mach/cm.h>
 #include <asm/system.h>
 #include <asm/leds.h>
 #include <asm/mach/time.h>
-#include "common.h"
 static struct amba_pl010_data integrator_uart_data;
 static struct amba_device rtc_device = {
@@ -163,8 +161,8 @@ arch_initcall(integrator_init);
 *  UART0  7    6
 *  UART1  5    4
 */
-#define SC_CTRLC        (IO_ADDRESS(INTEGRATOR_SC_BASE) + INTEGRATOR_SC_CTRLC_OFFSET)
+#define SC_CTRLC        IO_ADDRESS(INTEGRATOR_SC_CTRLC)
-#define SC_CTRLS        (IO_ADDRESS(INTEGRATOR_SC_BASE) + INTEGRATOR_SC_CTRLS_OFFSET)
+#define SC_CTRLS        IO_ADDRESS(INTEGRATOR_SC_CTRLS)
 static void integrator_uart_set_mctrl(struct amba_device *dev, void __iomem *base, unsigned int mctrl)
 {
@@ -196,7 +194,7 @@ static struct amba_pl010_data integrator_uart_data = {
        .set_mctrl = integrator_uart_set_mctrl,
 };
-#define CM_CTRL IO_ADDRESS(INTEGRATOR_HDR_BASE) + INTEGRATOR_HDR_CTRL_OFFSET
+#define CM_CTRL IO_ADDRESS(INTEGRATOR_HDR_CTRL)
 static DEFINE_SPINLOCK(cm_lock);
@@ -217,120 +215,3 @@ void cm_control(u32 mask, u32 set)
 }
 EXPORT_SYMBOL(cm_control);
-/*
- * Where is the timer (VA)?
- */
-#define TIMER0_VA_BASE (IO_ADDRESS(INTEGRATOR_CT_BASE)+0x00000000)
-#define TIMER1_VA_BASE (IO_ADDRESS(INTEGRATOR_CT_BASE)+0x00000100)
-#define TIMER2_VA_BASE (IO_ADDRESS(INTEGRATOR_CT_BASE)+0x00000200)
-#define VA_IC_BASE     IO_ADDRESS(INTEGRATOR_IC_BASE) 
-/*
- * How long is the timer interval?
- */
-#define TIMER_INTERVAL  (TICKS_PER_uSEC * mSEC_10)
-#if TIMER_INTERVAL >= 0x100000
-#define TICKS2USECS(x)  (256 * (x) / TICKS_PER_uSEC)
-#elif TIMER_INTERVAL >= 0x10000
-#define TICKS2USECS(x)  (16 * (x) / TICKS_PER_uSEC)
-#else
-#define TICKS2USECS(x)  ((x) / TICKS_PER_uSEC)
-#endif
-static unsigned long timer_reload;
-/*
- * Returns number of ms since last clock interrupt.  Note that interrupts
- * will have been disabled by do_gettimeoffset()
- */
-unsigned long integrator_gettimeoffset(void)
-{
-        unsigned long ticks1, ticks2, status;
-        /*
-         * Get the current number of ticks.  Note that there is a race
-         * condition between us reading the timer and checking for
-         * an interrupt.  We get around this by ensuring that the
-         * counter has not reloaded between our two reads.
-         */
-        ticks2 = readl(TIMER1_VA_BASE + TIMER_VALUE) & 0xffff;
-        do {
-                ticks1 = ticks2;
-                status = __raw_readl(VA_IC_BASE + IRQ_RAW_STATUS);
-                ticks2 = readl(TIMER1_VA_BASE + TIMER_VALUE) & 0xffff;
-        } while (ticks2 > ticks1);
-        /*
-         * Number of ticks since last interrupt.
-         */
-        ticks1 = timer_reload - ticks2;
-        /*
-         * Interrupt pending?  If so, we've reloaded once already.
-         */
-        if (status & (1 << IRQ_TIMERINT1))
-                ticks1 += timer_reload;
-        /*
-         * Convert the ticks to usecs
-         */
-        return TICKS2USECS(ticks1);
-}
-/*
- * IRQ handler for the timer
- */
-static irqreturn_t
-integrator_timer_interrupt(int irq, void *dev_id)
-{
-        /*
-         * clear the interrupt
-         */
-        writel(1, TIMER1_VA_BASE + TIMER_INTCLR);
-        timer_tick();
-        return IRQ_HANDLED;
-}
-static struct irqaction integrator_timer_irq = {
-        .name           = "Integrator Timer Tick",
-        .flags          = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
-        .handler        = integrator_timer_interrupt,
-};
-/*
- * Set up timer interrupt, and return the current time in seconds.
- */
-void __init integrator_time_init(unsigned long reload, unsigned int ctrl)
-{
-        unsigned int timer_ctrl = TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC;
-        timer_reload = reload;
-        timer_ctrl |= ctrl;
-        if (timer_reload > 0x100000) {
-                timer_reload >>= 8;
-                timer_ctrl |= TIMER_CTRL_DIV256;
-        } else if (timer_reload > 0x010000) {
-                timer_reload >>= 4;
-                timer_ctrl |= TIMER_CTRL_DIV16;
-        }
-        /*
-         * Initialise to a known state (all timers off)
-         */
-        writel(0, TIMER0_VA_BASE + TIMER_CTRL);
-        writel(0, TIMER1_VA_BASE + TIMER_CTRL);
-        writel(0, TIMER2_VA_BASE + TIMER_CTRL);
-        writel(timer_reload, TIMER1_VA_BASE + TIMER_LOAD);
-        writel(timer_reload, TIMER1_VA_BASE + TIMER_VALUE);
-        writel(timer_ctrl, TIMER1_VA_BASE + TIMER_CTRL);
-        /*
-         * Make irqs happen for the system timer
-         */
-        setup_irq(IRQ_TIMERINT1, &integrator_timer_irq);
-}
diff --git a/arch/arm/mach-integrator/cpu.c b/arch/arm/mach-integrator/cpu.c
index 44d4c2e8207b..1cb222daa06d 100644
--- a/arch/arm/mach-integrator/cpu.c
+++ b/arch/arm/mach-integrator/cpu.c
@@ -20,32 +20,39 @@
 #include <linux/io.h>
 #include <mach/hardware.h>
+#include <mach/platform.h>
 #include <asm/mach-types.h>
-#include <asm/hardware/icst525.h>
+#include <asm/hardware/icst.h>
 static struct cpufreq_driver integrator_driver;
-#define CM_ID   (IO_ADDRESS(INTEGRATOR_HDR_BASE)+INTEGRATOR_HDR_ID_OFFSET)
+#define CM_ID   IO_ADDRESS(INTEGRATOR_HDR_ID)
-#define CM_OSC  (IO_ADDRESS(INTEGRATOR_HDR_BASE)+INTEGRATOR_HDR_OSC_OFFSET)
+#define CM_OSC  IO_ADDRESS(INTEGRATOR_HDR_OSC)
-#define CM_STAT (IO_ADDRESS(INTEGRATOR_HDR_BASE)+INTEGRATOR_HDR_STAT_OFFSET)
+#define CM_STAT IO_ADDRESS(INTEGRATOR_HDR_STAT)
-#define CM_LOCK (IO_ADDRESS(INTEGRATOR_HDR_BASE)+INTEGRATOR_HDR_LOCK_OFFSET)
+#define CM_LOCK IO_ADDRESS(INTEGRATOR_HDR_LOCK)
-static const struct icst525_params lclk_params = {
+static const struct icst_params lclk_params = {
-        .ref            = 24000,
+        .ref            = 24000000,
-        .vco_max        = 320000,
+        .vco_max        = ICST525_VCO_MAX_5V,
+        .vco_min        = ICST525_VCO_MIN,
        .vd_min         = 8,
        .vd_max         = 132,
        .rd_min         = 24,
        .rd_max         = 24,
+        .s2div          = icst525_s2div,
+        .idx2s          = icst525_idx2s,
 };
-static const struct icst525_params cclk_params = {
+static const struct icst_params cclk_params = {
-        .ref            = 24000,
+        .ref            = 24000000,
-        .vco_max        = 320000,
+        .vco_max        = ICST525_VCO_MAX_5V,
+        .vco_min        = ICST525_VCO_MIN,
        .vd_min         = 12,
        .vd_max         = 160,
        .rd_min         = 24,
        .rd_max         = 24,
+        .s2div          = icst525_s2div,
+        .idx2s          = icst525_idx2s,
 };
 /*
@@ -53,17 +60,17 @@ static const struct icst525_params cclk_params = {
 */
 static int integrator_verify_policy(struct cpufreq_policy *policy)
 {
-        struct icst525_vco vco;
+        struct icst_vco vco;
        cpufreq_verify_within_limits(policy, 
                                     policy->cpuinfo.min_freq, 
                                     policy->cpuinfo.max_freq);
-        vco = icst525_khz_to_vco(&cclk_params, policy->max);
+        vco = icst_hz_to_vco(&cclk_params, policy->max * 1000);
-        policy->max = icst525_khz(&cclk_params, vco);
+        policy->max = icst_hz(&cclk_params, vco) / 1000;
-        vco = icst525_khz_to_vco(&cclk_params, policy->min);
+        vco = icst_hz_to_vco(&cclk_params, policy->min * 1000);
-        policy->min = icst525_khz(&cclk_params, vco);
+        policy->min = icst_hz(&cclk_params, vco) / 1000;
        cpufreq_verify_within_limits(policy, 
                                     policy->cpuinfo.min_freq, 
@@ -79,7 +86,7 @@ static int integrator_set_target(struct cpufreq_policy *policy,
 {
        cpumask_t cpus_allowed;
        int cpu = policy->cpu;
-        struct icst525_vco vco;
+        struct icst_vco vco;
        struct cpufreq_freqs freqs;
        u_int cm_osc;
@@ -105,17 +112,17 @@ static int integrator_set_target(struct cpufreq_policy *policy,
        }
        vco.v = cm_osc & 255;
        vco.r = 22;
-        freqs.old = icst525_khz(&cclk_params, vco);
+        freqs.old = icst_hz(&cclk_params, vco) / 1000;
-        /* icst525_khz_to_vco rounds down -- so we need the next
+        /* icst_hz_to_vco rounds down -- so we need the next
         * larger freq in case of CPUFREQ_RELATION_L.
         */
        if (relation == CPUFREQ_RELATION_L)
                target_freq += 999;
        if (target_freq > policy->max)
                target_freq = policy->max;
-        vco = icst525_khz_to_vco(&cclk_params, target_freq);
+        vco = icst_hz_to_vco(&cclk_params, target_freq * 1000);
-        freqs.new = icst525_khz(&cclk_params, vco);
+        freqs.new = icst_hz(&cclk_params, vco) / 1000;
        freqs.cpu = policy->cpu;
@@ -155,7 +162,7 @@ static unsigned int integrator_get(unsigned int cpu)
        cpumask_t cpus_allowed;
        unsigned int current_freq;
        u_int cm_osc;
-        struct icst525_vco vco;
+        struct icst_vco vco;
        cpus_allowed = current->cpus_allowed;
@@ -173,7 +180,7 @@ static unsigned int integrator_get(unsigned int cpu)
        vco.v = cm_osc & 255;
        vco.r = 22;
-        current_freq = icst525_khz(&cclk_params, vco); /* current freq */
+        current_freq = icst_hz(&cclk_params, vco) / 1000; /* current freq */
        set_cpus_allowed(current, cpus_allowed);
diff --git a/arch/arm/mach-integrator/impd1.c b/arch/arm/mach-integrator/impd1.c
index 0058c937719e..1a0ee93e4519 100644
--- a/arch/arm/mach-integrator/impd1.c
+++ b/arch/arm/mach-integrator/impd1.c
@@ -24,7 +24,7 @@
 #include <asm/clkdev.h>
 #include <mach/clkdev.h>
-#include <asm/hardware/icst525.h>
+#include <asm/hardware/icst.h>
 #include <mach/lm.h>
 #include <mach/impd1.h>
 #include <asm/sizes.h>
@@ -40,32 +40,25 @@ struct impd1_module {
        struct clk_lookup *clks[3];
 };
-static const struct icst525_params impd1_vco_params = {
+static const struct icst_params impd1_vco_params = {
-        .ref            = 24000,        /* 24 MHz */
+        .ref            = 24000000,     /* 24 MHz */
-        .vco_max        = 200000,       /* 200 MHz */
+        .vco_max        = ICST525_VCO_MAX_3V,
+        .vco_min        = ICST525_VCO_MIN,
        .vd_min         = 12,
        .vd_max         = 519,
        .rd_min         = 3,
        .rd_max         = 120,
+        .s2div          = icst525_s2div,
+        .idx2s          = icst525_idx2s,
 };
-static void impd1_setvco(struct clk *clk, struct icst525_vco vco)
+static void impd1_setvco(struct clk *clk, struct icst_vco vco)
 {
        struct impd1_module *impd1 = clk->data;
-        int vconr = clk - impd1->vcos;
+        u32 val = vco.v | (vco.r << 9) | (vco.s << 16);
-        u32 val;
-        val = vco.v | (vco.r << 9) | (vco.s << 16);
        writel(0xa05f, impd1->base + IMPD1_LOCK);
-        switch (vconr) {
+        writel(val, clk->vcoreg);
-        case 0:
-                writel(val, impd1->base + IMPD1_OSC1);
-                break;
-        case 1:
-                writel(val, impd1->base + IMPD1_OSC2);
-                break;
-        }
        writel(0, impd1->base + IMPD1_LOCK);
 #ifdef DEBUG
@@ -73,11 +66,17 @@ static void impd1_setvco(struct clk *clk, struct icst525_vco vco)
        vco.r = (val >> 9) & 0x7f;
        vco.s = (val >> 16) & 7;
-        pr_debug("IM-PD1: VCO%d clock is %ld kHz\n",
+        pr_debug("IM-PD1: VCO%d clock is %ld Hz\n",
-                 vconr, icst525_khz(&impd1_vco_params, vco));
+                 vconr, icst525_hz(&impd1_vco_params, vco));
 #endif
 }
+static const struct clk_ops impd1_clk_ops = {
+        .round  = icst_clk_round,
+        .set    = icst_clk_set,
+        .setvco = impd1_setvco,
+};
 void impd1_tweak_control(struct device *dev, u32 mask, u32 val)
 {
        struct impd1_module *impd1 = dev_get_drvdata(dev);
@@ -373,11 +372,13 @@ static int impd1_probe(struct lm_device *dev)
                (unsigned long)dev->resource.start);
        for (i = 0; i < ARRAY_SIZE(impd1->vcos); i++) {
+                impd1->vcos[i].ops = &impd1_clk_ops,
                impd1->vcos[i].owner = THIS_MODULE,
                impd1->vcos[i].params = &impd1_vco_params,
-                impd1->vcos[i].data = impd1,
+                impd1->vcos[i].data = impd1;
-                impd1->vcos[i].setvco = impd1_setvco;
        }
+        impd1->vcos[0].vcoreg = impd1->base + IMPD1_OSC1;
+        impd1->vcos[1].vcoreg = impd1->base + IMPD1_OSC2;
        impd1->clks[0] = clkdev_alloc(&impd1->vcos[0], NULL, "lm%x:01000",
                                        dev->id);
diff --git a/arch/arm/mach-integrator/include/mach/clkdev.h b/arch/arm/mach-integrator/include/mach/clkdev.h
index 9293e410832a..bfe07679faec 100644
--- a/arch/arm/mach-integrator/include/mach/clkdev.h
+++ b/arch/arm/mach-integrator/include/mach/clkdev.h
@@ -2,14 +2,15 @@
 #define __ASM_MACH_CLKDEV_H
 #include <linux/module.h>
-#include <asm/hardware/icst525.h>
+#include <plat/clock.h>
 struct clk {
        unsigned long           rate;
+        const struct clk_ops    *ops;
        struct module           *owner;
-        const struct icst525_params *params;
+        const struct icst_params *params;
+        void __iomem            *vcoreg;
        void                    *data;
-        void                    (*setvco)(struct clk *, struct icst525_vco vco);
 };
 static inline int __clk_get(struct clk *clk)
diff --git a/arch/arm/mach-integrator/include/mach/entry-macro.S b/arch/arm/mach-integrator/include/mach/entry-macro.S
index 7649c57acb53..3d029c9f3ef6 100644
--- a/arch/arm/mach-integrator/include/mach/entry-macro.S
+++ b/arch/arm/mach-integrator/include/mach/entry-macro.S
@@ -8,6 +8,7 @@
 * warranty of any kind, whether express or implied.
 */
 #include <mach/hardware.h>
+#include <mach/platform.h>
 #include <mach/irqs.h>
                .macro  disable_fiq
diff --git a/arch/arm/mach-integrator/include/mach/hardware.h b/arch/arm/mach-integrator/include/mach/hardware.h
index d795642fad22..8e26360ce9a3 100644
--- a/arch/arm/mach-integrator/include/mach/hardware.h
+++ b/arch/arm/mach-integrator/include/mach/hardware.h
@@ -23,7 +23,6 @@
 #define __ASM_ARCH_HARDWARE_H
 #include <asm/sizes.h>
-#include <mach/platform.h>
 /*
 * Where in virtual memory the IO devices (timers, system controllers
@@ -36,17 +35,19 @@
 #define PCIO_BASE               PCI_IO_VADDR
 #define PCIMEM_BASE             PCI_MEMORY_VADDR
-#ifdef CONFIG_MMU
-/* macro to get at IO space when running virtually */
-#define IO_ADDRESS(x) (((x) >> 4) + IO_BASE) 
-#else
-#define IO_ADDRESS(x) (x)
-#endif
 #define pcibios_assign_all_busses()     1
 #define PCIBIOS_MIN_IO          0x6000
 #define PCIBIOS_MIN_MEM         0x00100000
+/* macro to get at IO space when running virtually */
+#ifdef CONFIG_MMU
+#define IO_ADDRESS(x)   (((x) & 0x000fffff) | (((x) >> 4) & 0x0ff00000) | IO_BASE)
+#else
+#define IO_ADDRESS(x)   (x)
+#endif
+#define __io_address(n)         ((void __iomem *)IO_ADDRESS(n))
 #endif
diff --git a/arch/arm/mach-integrator/include/mach/platform.h b/arch/arm/mach-integrator/include/mach/platform.h
index e00a2624f269..5e6ea5cfea6e 100644
--- a/arch/arm/mach-integrator/include/mach/platform.h
+++ b/arch/arm/mach-integrator/include/mach/platform.h
@@ -23,9 +23,6 @@
 *
 *   Integrator address map
 *
- *      NOTE: This is a multi-hosted header file for use with uHAL and
- *            supported debuggers.
- *
 * ***********************************************************************/
 #ifndef __address_h
@@ -290,12 +287,14 @@
 #define INTEGRATOR_DBG_LEDS             (INTEGRATOR_DBG_BASE + INTEGRATOR_DBG_LEDS_OFFSET)
 #define INTEGRATOR_DBG_SWITCH           (INTEGRATOR_DBG_BASE + INTEGRATOR_DBG_SWITCH_OFFSET)
+#define INTEGRATOR_AP_GPIO_BASE         0x1B000000      /* GPIO */
-#if defined(CONFIG_ARCH_INTEGRATOR_AP)
+#define INTEGRATOR_CP_MMC_BASE          0x1C000000      /* MMC */
-#define INTEGRATOR_GPIO_BASE            0x1B000000       /*  GPIO */
+#define INTEGRATOR_CP_AACI_BASE         0x1D000000      /* AACI */
-#elif defined(CONFIG_ARCH_INTEGRATOR_CP)
+#define INTEGRATOR_CP_ETH_BASE          0xC8000000      /* Ethernet */
-#define INTEGRATOR_GPIO_BASE            0xC9000000       /*  GPIO */
+#define INTEGRATOR_CP_GPIO_BASE         0xC9000000      /* GPIO */
-#endif
+#define INTEGRATOR_CP_SIC_BASE          0xCA000000      /* SIC */
+#define INTEGRATOR_CP_CTL_BASE          0xCB000000      /* CP system control */
 /* ------------------------------------------------------------------------
 *  KMI keyboard/mouse definitions
@@ -328,20 +327,6 @@
 */
 #define PHYS_PCI_V3_BASE                0x62000000
-#define PCI_DRAMSIZE                    INTEGRATOR_SSRAM_SIZE
-/* 'export' these to UHAL */
-#define UHAL_PCI_IO                     PCI_IO_BASE
-#define UHAL_PCI_MEM                    PCI_MEM_BASE
-#define UHAL_PCI_ALLOC_IO_BASE          0x00004000
-#define UHAL_PCI_ALLOC_MEM_BASE         PCI_MEM_BASE
-#define UHAL_PCI_MAX_SLOT               20
-/* ========================================================================
- *  Start of uHAL definitions
- * ========================================================================
- */
 /* ------------------------------------------------------------------------
 *  Integrator Interrupt Controllers
 * ------------------------------------------------------------------------
@@ -389,7 +374,7 @@
 */
 /* ------------------------------------------------------------------------
- *  LED's - The header LED is not accessible via the uHAL API
+ *  LED's
 * ------------------------------------------------------------------------
 *
 */
@@ -402,34 +387,18 @@
 #define LED_BANK                        INTEGRATOR_DBG_LEDS
 /*
- *  Memory definitions - run uHAL out of SSRAM.
- *
- */
-#define uHAL_MEMORY_SIZE                INTEGRATOR_SSRAM_SIZE
-/*
- *  Clean base - dummy
- *
- */
-#define CLEAN_BASE                      INTEGRATOR_BOOT_ROM_HI
-/*
 *  Timer definitions
 *
 *  Only use timer 1 & 2
 *  (both run at 24MHz and will need the clock divider set to 16).
 *
- *  Timer 0 runs at bus frequency and therefore could vary and currently
+ *  Timer 0 runs at bus frequency
- *  uHAL can't handle that.
- *
 */
 #define INTEGRATOR_TIMER0_BASE          INTEGRATOR_CT_BASE
 #define INTEGRATOR_TIMER1_BASE          (INTEGRATOR_CT_BASE + 0x100)
 #define INTEGRATOR_TIMER2_BASE          (INTEGRATOR_CT_BASE + 0x200)
-#define MAX_TIMER                       2
-#define MAX_PERIOD                      699050
 #define TICKS_PER_uSEC                  24
 /*
@@ -437,14 +406,9 @@
 *
 */
 #define mSEC_1                          1000
-#define mSEC_5                          (mSEC_1 * 5)
 #define mSEC_10                         (mSEC_1 * 10)
-#define mSEC_25                         (mSEC_1 * 25)
-#define SEC_1                           (mSEC_1 * 1000)
 #define INTEGRATOR_CSR_BASE             0x10000000
 #define INTEGRATOR_CSR_SIZE             0x10000000
 #endif
-/*      END */
diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c
index 8138a7e24562..227cf4d05088 100644
--- a/arch/arm/mach-integrator/integrator_ap.c
+++ b/arch/arm/mach-integrator/integrator_ap.c
@@ -27,9 +27,14 @@
 #include <linux/sysdev.h>
 #include <linux/amba/bus.h>
 #include <linux/amba/kmi.h>
+#include <linux/clocksource.h>
+#include <linux/clockchips.h>
+#include <linux/interrupt.h>
 #include <linux/io.h>
 #include <mach/hardware.h>
+#include <mach/platform.h>
+#include <asm/hardware/arm_timer.h>
 #include <asm/irq.h>
 #include <asm/setup.h>
 #include <asm/param.h>          /* HZ */
@@ -43,8 +48,6 @@
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
-#include "common.h"
 /* 
 * All IO addresses are mapped onto VA 0xFFFx.xxxx, where x.xxxx
 * is the (PA >> 12).
@@ -55,7 +58,7 @@
 #define VA_IC_BASE      IO_ADDRESS(INTEGRATOR_IC_BASE) 
 #define VA_SC_BASE      IO_ADDRESS(INTEGRATOR_SC_BASE)
 #define VA_EBI_BASE     IO_ADDRESS(INTEGRATOR_EBI_BASE)
-#define VA_CMIC_BASE    IO_ADDRESS(INTEGRATOR_HDR_BASE) + INTEGRATOR_HDR_IC_OFFSET
+#define VA_CMIC_BASE    IO_ADDRESS(INTEGRATOR_HDR_IC)
 /*
 * Logical      Physical
@@ -117,8 +120,8 @@ static struct map_desc ap_io_desc[] __initdata = {
                .length         = SZ_4K,
                .type           = MT_DEVICE
        }, {
-                .virtual        = IO_ADDRESS(INTEGRATOR_GPIO_BASE),
+                .virtual        = IO_ADDRESS(INTEGRATOR_AP_GPIO_BASE),
-                .pfn            = __phys_to_pfn(INTEGRATOR_GPIO_BASE),
+                .pfn            = __phys_to_pfn(INTEGRATOR_AP_GPIO_BASE),
                .length         = SZ_4K,
                .type           = MT_DEVICE
        }, {
@@ -334,14 +337,163 @@ static void __init ap_init(void)
        }
 }
+/*
+ * Where is the timer (VA)?
+ */
+#define TIMER0_VA_BASE IO_ADDRESS(INTEGRATOR_TIMER0_BASE)
+#define TIMER1_VA_BASE IO_ADDRESS(INTEGRATOR_TIMER1_BASE)
+#define TIMER2_VA_BASE IO_ADDRESS(INTEGRATOR_TIMER2_BASE)
+/*
+ * How long is the timer interval?
+ */
+#define TIMER_INTERVAL  (TICKS_PER_uSEC * mSEC_10)
+#if TIMER_INTERVAL >= 0x100000
+#define TICKS2USECS(x)  (256 * (x) / TICKS_PER_uSEC)
+#elif TIMER_INTERVAL >= 0x10000
+#define TICKS2USECS(x)  (16 * (x) / TICKS_PER_uSEC)
+#else
+#define TICKS2USECS(x)  ((x) / TICKS_PER_uSEC)
+#endif
+static unsigned long timer_reload;
+static void __iomem * const clksrc_base = (void __iomem *)TIMER2_VA_BASE;
+static cycle_t timersp_read(struct clocksource *cs)
+{
+        return ~(readl(clksrc_base + TIMER_VALUE) & 0xffff);
+}
+static struct clocksource clocksource_timersp = {
+        .name           = "timer2",
+        .rating         = 200,
+        .read           = timersp_read,
+        .mask           = CLOCKSOURCE_MASK(16),
+        .shift          = 16,
+        .flags          = CLOCK_SOURCE_IS_CONTINUOUS,
+};
+static void integrator_clocksource_init(u32 khz)
+{
+        struct clocksource *cs = &clocksource_timersp;
+        void __iomem *base = clksrc_base;
+        u32 ctrl = TIMER_CTRL_ENABLE;
+        if (khz >= 1500) {
+                khz /= 16;
+                ctrl = TIMER_CTRL_DIV16;
+        }
+        writel(ctrl, base + TIMER_CTRL);
+        writel(0xffff, base + TIMER_LOAD);
+        cs->mult = clocksource_khz2mult(khz, cs->shift);
+        clocksource_register(cs);
+}
+static void __iomem * const clkevt_base = (void __iomem *)TIMER1_VA_BASE;
+/*
+ * IRQ handler for the timer
+ */
+static irqreturn_t integrator_timer_interrupt(int irq, void *dev_id)
+{
+        struct clock_event_device *evt = dev_id;
+        /* clear the interrupt */
+        writel(1, clkevt_base + TIMER_INTCLR);
+        evt->event_handler(evt);
+        return IRQ_HANDLED;
+}
+static void clkevt_set_mode(enum clock_event_mode mode, struct clock_event_device *evt)
+{
+        u32 ctrl = readl(clkevt_base + TIMER_CTRL) & ~TIMER_CTRL_ENABLE;
+        BUG_ON(mode == CLOCK_EVT_MODE_ONESHOT);
+        if (mode == CLOCK_EVT_MODE_PERIODIC) {
+                writel(ctrl, clkevt_base + TIMER_CTRL);
+                writel(timer_reload, clkevt_base + TIMER_LOAD);
+                ctrl |= TIMER_CTRL_PERIODIC | TIMER_CTRL_ENABLE;
+        }
+        writel(ctrl, clkevt_base + TIMER_CTRL);
+}
+static int clkevt_set_next_event(unsigned long next, struct clock_event_device *evt)
+{
+        unsigned long ctrl = readl(clkevt_base + TIMER_CTRL);
+        writel(ctrl & ~TIMER_CTRL_ENABLE, clkevt_base + TIMER_CTRL);
+        writel(next, clkevt_base + TIMER_LOAD);
+        writel(ctrl | TIMER_CTRL_ENABLE, clkevt_base + TIMER_CTRL);
+        return 0;
+}
+static struct clock_event_device integrator_clockevent = {
+        .name           = "timer1",
+        .shift          = 34,
+        .features       = CLOCK_EVT_FEAT_PERIODIC,
+        .set_mode       = clkevt_set_mode,
+        .set_next_event = clkevt_set_next_event,
+        .rating         = 300,
+        .cpumask        = cpu_all_mask,
+};
+static struct irqaction integrator_timer_irq = {
+        .name           = "timer",
+        .flags          = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+        .handler        = integrator_timer_interrupt,
+        .dev_id         = &integrator_clockevent,
+};
+static void integrator_clockevent_init(u32 khz)
+{
+        struct clock_event_device *evt = &integrator_clockevent;
+        unsigned int ctrl = 0;
+        if (khz * 1000 > 0x100000 * HZ) {
+                khz /= 256;
+                ctrl |= TIMER_CTRL_DIV256;
+        } else if (khz * 1000 > 0x10000 * HZ) {
+                khz /= 16;
+                ctrl |= TIMER_CTRL_DIV16;
+        }
+        timer_reload = khz * 1000 / HZ;
+        writel(ctrl, clkevt_base + TIMER_CTRL);
+        evt->irq = IRQ_TIMERINT1;
+        evt->mult = div_sc(khz, NSEC_PER_MSEC, evt->shift);
+        evt->max_delta_ns = clockevent_delta2ns(0xffff, evt);
+        evt->min_delta_ns = clockevent_delta2ns(0xf, evt);
+        setup_irq(IRQ_TIMERINT1, &integrator_timer_irq);
+        clockevents_register_device(evt);
+}
+/*
+ * Set up timer(s).
+ */
 static void __init ap_init_timer(void)
 {
-        integrator_time_init(1000000 * TICKS_PER_uSEC / HZ, 0);
+        u32 khz = TICKS_PER_uSEC * 1000;
+        writel(0, TIMER0_VA_BASE + TIMER_CTRL);
+        writel(0, TIMER1_VA_BASE + TIMER_CTRL);
+        writel(0, TIMER2_VA_BASE + TIMER_CTRL);
+        integrator_clocksource_init(khz);
+        integrator_clockevent_init(khz);
 }
 static struct sys_timer ap_timer = {
        .init           = ap_init_timer,
-        .offset         = integrator_gettimeoffset,
 };
 MACHINE_START(INTEGRATOR, "ARM-Integrator")
diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c
index 66ef86d6d9e3..54edb6b8504f 100644
--- a/arch/arm/mach-integrator/integrator_cp.c
+++ b/arch/arm/mach-integrator/integrator_cp.c
@@ -25,10 +25,12 @@
 #include <asm/clkdev.h>
 #include <mach/clkdev.h>
 #include <mach/hardware.h>
+#include <mach/platform.h>
 #include <asm/irq.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
-#include <asm/hardware/icst525.h>
+#include <asm/hardware/arm_timer.h>
+#include <asm/hardware/icst.h>
 #include <mach/cm.h>
 #include <mach/lm.h>
@@ -39,24 +41,20 @@
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
-#include "common.h"
+#include <plat/timer-sp.h>
-#define INTCP_PA_MMC_BASE               0x1c000000
-#define INTCP_PA_AACI_BASE              0x1d000000
 #define INTCP_PA_FLASH_BASE             0x24000000
 #define INTCP_FLASH_SIZE                SZ_32M
 #define INTCP_PA_CLCD_BASE              0xc0000000
-#define INTCP_VA_CIC_BASE               IO_ADDRESS(INTEGRATOR_HDR_BASE) + 0x40
+#define INTCP_VA_CIC_BASE               IO_ADDRESS(INTEGRATOR_HDR_BASE + 0x40)
 #define INTCP_VA_PIC_BASE               IO_ADDRESS(INTEGRATOR_IC_BASE)
-#define INTCP_VA_SIC_BASE               IO_ADDRESS(0xca000000)
+#define INTCP_VA_SIC_BASE               IO_ADDRESS(INTEGRATOR_CP_SIC_BASE)
-#define INTCP_PA_ETH_BASE               0xc8000000
 #define INTCP_ETH_SIZE                  0x10
-#define INTCP_VA_CTRL_BASE              IO_ADDRESS(0xcb000000)
+#define INTCP_VA_CTRL_BASE              IO_ADDRESS(INTEGRATOR_CP_CTL_BASE)
 #define INTCP_FLASHPROG                 0x04
 #define CINTEGRATOR_FLASHPROG_FLVPPEN   (1 << 0)
 #define CINTEGRATOR_FLASHPROG_FLWREN    (1 << 1)
@@ -71,7 +69,9 @@
 * f1600000     16000000        UART 0
 * f1700000     17000000        UART 1
 * f1a00000     1a000000        Debug LEDs
- * f1b00000     1b000000        GPIO
+ * fc900000     c9000000        GPIO
+ * fca00000     ca000000        SIC
+ * fcb00000     cb000000        CP system control
 */
 static struct map_desc intcp_io_desc[] __initdata = {
@@ -116,18 +116,18 @@ static struct map_desc intcp_io_desc[] __initdata = {
                .length         = SZ_4K,
                .type           = MT_DEVICE
        }, {
-                .virtual        = IO_ADDRESS(INTEGRATOR_GPIO_BASE),
+                .virtual        = IO_ADDRESS(INTEGRATOR_CP_GPIO_BASE),
-                .pfn            = __phys_to_pfn(INTEGRATOR_GPIO_BASE),
+                .pfn            = __phys_to_pfn(INTEGRATOR_CP_GPIO_BASE),
                .length         = SZ_4K,
                .type           = MT_DEVICE
        }, {
-                .virtual        = IO_ADDRESS(0xca000000),
+                .virtual        = IO_ADDRESS(INTEGRATOR_CP_SIC_BASE),
-                .pfn            = __phys_to_pfn(0xca000000),
+                .pfn            = __phys_to_pfn(INTEGRATOR_CP_SIC_BASE),
                .length         = SZ_4K,
                .type           = MT_DEVICE
        }, {
-                .virtual        = IO_ADDRESS(0xcb000000),
+                .virtual        = IO_ADDRESS(INTEGRATOR_CP_CTL_BASE),
-                .pfn            = __phys_to_pfn(0xcb000000),
+                .pfn            = __phys_to_pfn(INTEGRATOR_CP_CTL_BASE),
                .length         = SZ_4K,
                .type           = MT_DEVICE
        }
@@ -266,33 +266,43 @@ static void __init intcp_init_irq(void)
 /*
 * Clock handling
 */
-#define CM_LOCK (IO_ADDRESS(INTEGRATOR_HDR_BASE)+INTEGRATOR_HDR_LOCK_OFFSET)
+#define CM_LOCK         (__io_address(INTEGRATOR_HDR_BASE)+INTEGRATOR_HDR_LOCK_OFFSET)
-#define CM_AUXOSC (IO_ADDRESS(INTEGRATOR_HDR_BASE)+0x1c)
+#define CM_AUXOSC       (__io_address(INTEGRATOR_HDR_BASE)+0x1c)
-static const struct icst525_params cp_auxvco_params = {
+static const struct icst_params cp_auxvco_params = {
-        .ref            = 24000,
+        .ref            = 24000000,
-        .vco_max        = 320000,
+        .vco_max        = ICST525_VCO_MAX_5V,
+        .vco_min        = ICST525_VCO_MIN,
        .vd_min         = 8,
        .vd_max         = 263,
        .rd_min         = 3,
        .rd_max         = 65,
+        .s2div          = icst525_s2div,
+        .idx2s          = icst525_idx2s,
 };
-static void cp_auxvco_set(struct clk *clk, struct icst525_vco vco)
+static void cp_auxvco_set(struct clk *clk, struct icst_vco vco)
 {
        u32 val;
-        val = readl(CM_AUXOSC) & ~0x7ffff;
+        val = readl(clk->vcoreg) & ~0x7ffff;
        val |= vco.v | (vco.r << 9) | (vco.s << 16);
        writel(0xa05f, CM_LOCK);
-        writel(val, CM_AUXOSC);
+        writel(val, clk->vcoreg);
        writel(0, CM_LOCK);
 }
+static const struct clk_ops cp_auxclk_ops = {
+        .round  = icst_clk_round,
+        .set    = icst_clk_set,
+        .setvco = cp_auxvco_set,
+};
 static struct clk cp_auxclk = {
+        .ops    = &cp_auxclk_ops,
        .params = &cp_auxvco_params,
-        .setvco = cp_auxvco_set,
+        .vcoreg = CM_AUXOSC,
 };
 static struct clk_lookup cp_lookups[] = {
@@ -363,8 +373,8 @@ static struct platform_device intcp_flash_device = {
 static struct resource smc91x_resources[] = {
        [0] = {
-                .start  = INTCP_PA_ETH_BASE,
+                .start  = INTEGRATOR_CP_ETH_BASE,
-                .end    = INTCP_PA_ETH_BASE + INTCP_ETH_SIZE - 1,
+                .end    = INTEGRATOR_CP_ETH_BASE + INTCP_ETH_SIZE - 1,
                .flags  = IORESOURCE_MEM,
        },
        [1] = {
@@ -394,8 +404,8 @@ static struct platform_device *intcp_devs[] __initdata = {
 */
 static unsigned int mmc_status(struct device *dev)
 {
-        unsigned int status = readl(IO_ADDRESS(0xca000000) + 4);
+        unsigned int status = readl(IO_ADDRESS(0xca000000 + 4));
-        writel(8, IO_ADDRESS(0xcb000000) + 8);
+        writel(8, IO_ADDRESS(INTEGRATOR_CP_CTL_BASE + 8));
        return status & 8;
 }
@@ -413,8 +423,8 @@ static struct amba_device mmc_device = {
                .platform_data = &mmc_data,
        },
        .res            = {
-                .start  = INTCP_PA_MMC_BASE,
+                .start  = INTEGRATOR_CP_MMC_BASE,
-                .end    = INTCP_PA_MMC_BASE + SZ_4K - 1,
+                .end    = INTEGRATOR_CP_MMC_BASE + SZ_4K - 1,
                .flags  = IORESOURCE_MEM,
        },
        .irq            = { IRQ_CP_MMCIINT0, IRQ_CP_MMCIINT1 },
@@ -426,8 +436,8 @@ static struct amba_device aaci_device = {
                .init_name = "mb:1d",
        },
        .res            = {
-                .start  = INTCP_PA_AACI_BASE,
+                .start  = INTEGRATOR_CP_AACI_BASE,
-                .end    = INTCP_PA_AACI_BASE + SZ_4K - 1,
+                .end    = INTEGRATOR_CP_AACI_BASE + SZ_4K - 1,
                .flags  = IORESOURCE_MEM,
        },
        .irq            = { IRQ_CP_AACIINT, NO_IRQ },
@@ -567,16 +577,22 @@ static void __init intcp_init(void)
        }
 }
-#define TIMER_CTRL_IE   (1 << 5)                        /* Interrupt Enable */
+#define TIMER0_VA_BASE __io_address(INTEGRATOR_TIMER0_BASE)
+#define TIMER1_VA_BASE __io_address(INTEGRATOR_TIMER1_BASE)
+#define TIMER2_VA_BASE __io_address(INTEGRATOR_TIMER2_BASE)
 static void __init intcp_timer_init(void)
 {
-        integrator_time_init(1000000 / HZ, TIMER_CTRL_IE);
+        writel(0, TIMER0_VA_BASE + TIMER_CTRL);
+        writel(0, TIMER1_VA_BASE + TIMER_CTRL);
+        writel(0, TIMER2_VA_BASE + TIMER_CTRL);
+        sp804_clocksource_init(TIMER2_VA_BASE);
+        sp804_clockevents_init(TIMER1_VA_BASE, IRQ_TIMERINT1);
 }
 static struct sys_timer cp_timer = {
        .init           = intcp_timer_init,
-        .offset         = integrator_gettimeoffset,
 };
 MACHINE_START(CINTEGRATOR, "ARM-IntegratorCP")
diff --git a/arch/arm/mach-integrator/leds.c b/arch/arm/mach-integrator/leds.c
index 8dcc823f4135..28be186adb89 100644
--- a/arch/arm/mach-integrator/leds.c
+++ b/arch/arm/mach-integrator/leds.c
@@ -27,6 +27,7 @@
 #include <linux/io.h>
 #include <mach/hardware.h>
+#include <mach/platform.h>
 #include <asm/leds.h>
 #include <asm/system.h>
 #include <asm/mach-types.h>
diff --git a/arch/arm/mach-integrator/pci_v3.c b/arch/arm/mach-integrator/pci_v3.c
index 148d25fc636f..e5491629c6da 100644
--- a/arch/arm/mach-integrator/pci_v3.c
+++ b/arch/arm/mach-integrator/pci_v3.c
@@ -30,6 +30,7 @@
 #include <linux/io.h>
 #include <mach/hardware.h>
+#include <mach/platform.h>
 #include <asm/irq.h>
 #include <asm/signal.h>
 #include <asm/system.h>
@@ -390,9 +391,9 @@ static int __init pci_v3_setup_resources(struct resource **resource)
 * means I can't get additional information on the reason for the pm2fb
 * problems.  I suppose I'll just have to mind-meld with the machine. ;)
 */
-#define SC_PCI     (IO_ADDRESS(INTEGRATOR_SC_BASE) + INTEGRATOR_SC_PCIENABLE_OFFSET)
+#define SC_PCI     IO_ADDRESS(INTEGRATOR_SC_PCIENABLE)
-#define SC_LBFADDR (IO_ADDRESS(INTEGRATOR_SC_BASE) + 0x20)
+#define SC_LBFADDR IO_ADDRESS(INTEGRATOR_SC_BASE + 0x20)
-#define SC_LBFCODE (IO_ADDRESS(INTEGRATOR_SC_BASE) + 0x24)
+#define SC_LBFCODE IO_ADDRESS(INTEGRATOR_SC_BASE + 0x24)
 static int
 v3_pci_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
diff --git a/arch/arm/mach-iop32x/n2100.c b/arch/arm/mach-iop32x/n2100.c
index 2a5c637639bb..266b1f58a784 100644
--- a/arch/arm/mach-iop32x/n2100.c
+++ b/arch/arm/mach-iop32x/n2100.c
@@ -177,7 +177,7 @@ static struct plat_serial8250_port n2100_serial_port[] = {
                .mapbase        = N2100_UART,
                .membase        = (char *)N2100_UART,
                .irq            = 0,
-                .flags          = UPF_SKIP_TEST,
+                .flags          = UPF_SKIP_TEST | UPF_AUTO_IRQ | UPF_SHARE_IRQ,
                .iotype         = UPIO_MEM,
                .regshift       = 0,
                .uartclk        = 1843200,
diff --git a/arch/arm/mach-nomadik/Kconfig b/arch/arm/mach-nomadik/Kconfig
index 3c5e0f522e9c..71f3ea623974 100644
--- a/arch/arm/mach-nomadik/Kconfig
+++ b/arch/arm/mach-nomadik/Kconfig
@@ -6,6 +6,7 @@ config MACH_NOMADIK_8815NHK
        bool "ST 8815 Nomadik Hardware Kit (evaluation board)"
        select NOMADIK_8815
        select HAS_MTU
+        select NOMADIK_GPIO
 endmenu
diff --git a/arch/arm/mach-nomadik/Makefile b/arch/arm/mach-nomadik/Makefile
index 36f67fb207d2..a6bbd1a7b4e7 100644
--- a/arch/arm/mach-nomadik/Makefile
+++ b/arch/arm/mach-nomadik/Makefile
@@ -7,7 +7,7 @@
 # Object file lists.
-obj-y                   += clock.o gpio.o
+obj-y                   += clock.o
 # Cpu revision
 obj-$(CONFIG_NOMADIK_8815) += cpu-8815.o
diff --git a/arch/arm/mach-nomadik/board-nhk8815.c b/arch/arm/mach-nomadik/board-nhk8815.c
index ab3712c86d2b..841d459ad59d 100644
--- a/arch/arm/mach-nomadik/board-nhk8815.c
+++ b/arch/arm/mach-nomadik/board-nhk8815.c
@@ -32,7 +32,6 @@
 #include <mach/setup.h>
 #include <mach/nand.h>
 #include <mach/fsmc.h>
-#include "clock.h"
 /* Initial value for SRC control register: all timers use MXTAL/8 source */
 #define SRC_CR_INIT_MASK        0x00007fff
@@ -202,11 +201,6 @@ static struct amba_device *amba_devs[] __initdata = {
        &uart1_device,
 };
-/* We have a fixed clock alone, by now */
-static struct clk nhk8815_clk_48 = {
-        .rate = 48*1000*1000,
-};
 static struct resource nhk8815_eth_resources[] = {
        {
                .name = "smc91x-regs",
@@ -276,10 +270,8 @@ static void __init nhk8815_platform_init(void)
        platform_add_devices(nhk8815_platform_devices,
                             ARRAY_SIZE(nhk8815_platform_devices));
-        for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
+        for (i = 0; i < ARRAY_SIZE(amba_devs); i++)
-                nmdk_clk_create(&nhk8815_clk_48, amba_devs[i]->dev.init_name);
                amba_device_register(amba_devs[i], &iomem_resource);
-        }
 }
 MACHINE_START(NOMADIK, "NHK8815")
diff --git a/arch/arm/mach-nomadik/clock.c b/arch/arm/mach-nomadik/clock.c
index 9f92502a0083..60f5bee09f2e 100644
--- a/arch/arm/mach-nomadik/clock.c
+++ b/arch/arm/mach-nomadik/clock.c
@@ -32,14 +32,36 @@ void clk_disable(struct clk *clk)
 }
 EXPORT_SYMBOL(clk_disable);
-/* Create a clock structure with the given name */
+/* We have a fixed clock alone, for now */
-int nmdk_clk_create(struct clk *clk, const char *dev_id)
+static struct clk clk_48 = {
-{
+        .rate = 48 * 1000 * 1000,
-        struct clk_lookup *clkdev;
+};
+/*
+ * Catch-all default clock to satisfy drivers using the clk API.  We don't
+ * model the actual hardware clocks yet.
+ */
+static struct clk clk_default;
-        clkdev = clkdev_alloc(clk, NULL, dev_id);
+#define CLK(_clk, dev)                          \
-        if (!clkdev)
+        {                                       \
-                return -ENOMEM;
+                .clk            = _clk,         \
-        clkdev_add(clkdev);
+                .dev_id         = dev,          \
+        }
+static struct clk_lookup lookups[] = {
+        CLK(&clk_48, "uart0"),
+        CLK(&clk_48, "uart1"),
+        CLK(&clk_default, "gpio.0"),
+        CLK(&clk_default, "gpio.1"),
+        CLK(&clk_default, "gpio.2"),
+        CLK(&clk_default, "gpio.3"),
+};
+static int __init clk_init(void)
+{
+        clkdev_add_table(lookups, ARRAY_SIZE(lookups));
        return 0;
 }
+arch_initcall(clk_init);
diff --git a/arch/arm/mach-nomadik/clock.h b/arch/arm/mach-nomadik/clock.h
index 235faec7f627..5563985a2cc7 100644
--- a/arch/arm/mach-nomadik/clock.h
+++ b/arch/arm/mach-nomadik/clock.h
@@ -11,4 +11,3 @@
 struct clk {
        unsigned long           rate;
 };
-extern int nmdk_clk_create(struct clk *clk, const char *dev_id);
diff --git a/arch/arm/mach-nomadik/cpu-8815.c b/arch/arm/mach-nomadik/cpu-8815.c
index 9bf33b30a025..91c3c901b469 100644
--- a/arch/arm/mach-nomadik/cpu-8815.c
+++ b/arch/arm/mach-nomadik/cpu-8815.c
@@ -20,6 +20,7 @@
 #include <linux/init.h>
 #include <linux/device.h>
 #include <linux/amba/bus.h>
+#include <linux/platform_device.h>
 #include <linux/gpio.h>
 #include <mach/hardware.h>
@@ -30,60 +31,66 @@
 #include <asm/cacheflush.h>
 #include <asm/hardware/cache-l2x0.h>
+#define __MEM_4K_RESOURCE(x) \
+        .res = {.start = (x), .end = (x) + SZ_4K - 1, .flags = IORESOURCE_MEM}
 /* The 8815 has 4 GPIO blocks, let's register them immediately */
+#define GPIO_RESOURCE(block)                                            \
+        {                                                               \
+                .start  = NOMADIK_GPIO##block##_BASE,                   \
+                .end    = NOMADIK_GPIO##block##_BASE + SZ_4K - 1,       \
+                .flags  = IORESOURCE_MEM,                               \
+        },                                                              \
+        {                                                               \
+                .start  = IRQ_GPIO##block,                              \
+                .end    = IRQ_GPIO##block,                              \
+                .flags  = IORESOURCE_IRQ,                               \
+        }
+#define GPIO_DEVICE(block)                                              \
+        {                                                               \
+                .name           = "gpio",                               \
+                .id             = block,                                \
+                .num_resources  = 2,                                    \
+                .resource       = &cpu8815_gpio_resources[block * 2],   \
+                .dev = {                                                \
+                        .platform_data = &cpu8815_gpio[block],          \
+                },                                                      \
+        }
 static struct nmk_gpio_platform_data cpu8815_gpio[] = {
        {
                .name = "GPIO-0-31",
                .first_gpio = 0,
                .first_irq = NOMADIK_GPIO_TO_IRQ(0),
-                .parent_irq = IRQ_GPIO0,
        }, {
                .name = "GPIO-32-63",
                .first_gpio = 32,
                .first_irq = NOMADIK_GPIO_TO_IRQ(32),
-                .parent_irq = IRQ_GPIO1,
        }, {
                .name = "GPIO-64-95",
                .first_gpio = 64,
                .first_irq = NOMADIK_GPIO_TO_IRQ(64),
-                .parent_irq = IRQ_GPIO2,
        }, {
                .name = "GPIO-96-127", /* 124..127 not routed to pin */
                .first_gpio = 96,
                .first_irq = NOMADIK_GPIO_TO_IRQ(96),
-                .parent_irq = IRQ_GPIO3,
        }
 };
-#define __MEM_4K_RESOURCE(x) \
+static struct resource cpu8815_gpio_resources[] = {
-        .res = {.start = (x), .end = (x) + SZ_4K - 1, .flags = IORESOURCE_MEM}
+        GPIO_RESOURCE(0),
+        GPIO_RESOURCE(1),
+        GPIO_RESOURCE(2),
+        GPIO_RESOURCE(3),
+};
-static struct amba_device cpu8815_amba_gpio[] = {
+static struct platform_device cpu8815_platform_gpio[] = {
-        {
+        GPIO_DEVICE(0),
-                .dev = {
+        GPIO_DEVICE(1),
-                        .init_name = "gpio0",
+        GPIO_DEVICE(2),
-                        .platform_data = cpu8815_gpio + 0,
+        GPIO_DEVICE(3),
-                },
-                __MEM_4K_RESOURCE(NOMADIK_GPIO0_BASE),
-        }, {
-                .dev = {
-                        .init_name = "gpio1",
-                        .platform_data = cpu8815_gpio + 1,
-                },
-                __MEM_4K_RESOURCE(NOMADIK_GPIO1_BASE),
-        }, {
-                .dev = {
-                        .init_name = "gpio2",
-                        .platform_data = cpu8815_gpio + 2,
-                },
-                __MEM_4K_RESOURCE(NOMADIK_GPIO2_BASE),
-        }, {
-                .dev = {
-                        .init_name = "gpio3",
-                        .platform_data = cpu8815_gpio + 3,
-                },
-                __MEM_4K_RESOURCE(NOMADIK_GPIO3_BASE),
-        },
 };
 static struct amba_device cpu8815_amba_rng = {
@@ -93,11 +100,14 @@ static struct amba_device cpu8815_amba_rng = {
        __MEM_4K_RESOURCE(NOMADIK_RNG_BASE),
 };
+static struct platform_device *platform_devs[] __initdata = {
+        cpu8815_platform_gpio + 0,
+        cpu8815_platform_gpio + 1,
+        cpu8815_platform_gpio + 2,
+        cpu8815_platform_gpio + 3,
+};
 static struct amba_device *amba_devs[] __initdata = {
-        cpu8815_amba_gpio + 0,
-        cpu8815_amba_gpio + 1,
-        cpu8815_amba_gpio + 2,
-        cpu8815_amba_gpio + 3,
        &cpu8815_amba_rng
 };
@@ -105,6 +115,7 @@ static int __init cpu8815_init(void)
 {
        int i;
+        platform_add_devices(platform_devs, ARRAY_SIZE(platform_devs));
        for (i = 0; i < ARRAY_SIZE(amba_devs); i++)
                amba_device_register(amba_devs[i], &iomem_resource);
        return 0;
diff --git a/arch/arm/mach-nomadik/include/mach/gpio.h b/arch/arm/mach-nomadik/include/mach/gpio.h
index 61577c9f9a7d..7a81a0420343 100644
--- a/arch/arm/mach-nomadik/include/mach/gpio.h
+++ b/arch/arm/mach-nomadik/include/mach/gpio.h
@@ -1,71 +1,6 @@
-/*
- * Structures and registers for GPIO access in the Nomadik SoC
- *
- * Copyright (C) 2008 STMicroelectronics
- *     Author: Prafulla WADASKAR <prafulla.wadaskar@st.com>
- * Copyright (C) 2009 Alessandro Rubini <rubini@unipv.it>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
 #ifndef __ASM_ARCH_GPIO_H
 #define __ASM_ARCH_GPIO_H
-#include <asm-generic/gpio.h>
+#include <plat/gpio.h>
-/*
- * These currently cause a function call to happen, they may be optimized
- * if needed by adding cpu-specific defines to identify blocks
- * (see mach-pxa/include/mach/gpio.h as an example using GPLR etc)
- */
-#define gpio_get_value  __gpio_get_value
-#define gpio_set_value  __gpio_set_value
-#define gpio_cansleep   __gpio_cansleep
-#define gpio_to_irq     __gpio_to_irq
-/*
- * "nmk_gpio" and "NMK_GPIO" stand for "Nomadik GPIO", leaving
- * the "gpio" namespace for generic and cross-machine functions
- */
-/* Register in the logic block */
-#define NMK_GPIO_DAT    0x00
-#define NMK_GPIO_DATS   0x04
-#define NMK_GPIO_DATC   0x08
-#define NMK_GPIO_PDIS   0x0c
-#define NMK_GPIO_DIR    0x10
-#define NMK_GPIO_DIRS   0x14
-#define NMK_GPIO_DIRC   0x18
-#define NMK_GPIO_SLPC   0x1c
-#define NMK_GPIO_AFSLA  0x20
-#define NMK_GPIO_AFSLB  0x24
-#define NMK_GPIO_RIMSC  0x40
-#define NMK_GPIO_FIMSC  0x44
-#define NMK_GPIO_IS     0x48
-#define NMK_GPIO_IC     0x4c
-#define NMK_GPIO_RWIMSC 0x50
-#define NMK_GPIO_FWIMSC 0x54
-#define NMK_GPIO_WKS    0x58
-/* Alternate functions: function C is set in hw by setting both A and B */
-#define NMK_GPIO_ALT_GPIO       0
-#define NMK_GPIO_ALT_A  1
-#define NMK_GPIO_ALT_B  2
-#define NMK_GPIO_ALT_C  (NMK_GPIO_ALT_A | NMK_GPIO_ALT_B)
-extern int nmk_gpio_set_mode(int gpio, int gpio_mode);
-extern int nmk_gpio_get_mode(int gpio);
-/*
- * Platform data to register a block: only the initial gpio/irq number.
- */
-struct nmk_gpio_platform_data {
-        char *name;
-        int first_gpio;
-        int first_irq;
-        int parent_irq;
-};
 #endif /* __ASM_ARCH_GPIO_H */
diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
index 23e4d7733610..4a1c2328bcc3 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -17,8 +17,10 @@
 #include <linux/clk.h>
 #include <mach/hardware.h>
+#include <mach/irqs.h>
 #include <asm/mach-types.h>
 #include <asm/mach/map.h>
+#include <asm/pmu.h>
 #include <plat/control.h>
 #include <plat/tc.h>
@@ -453,6 +455,37 @@ static void omap_init_mcspi(void)
 static inline void omap_init_mcspi(void) {}
 #endif
+static struct resource omap2_pmu_resource = {
+        .start  = 3,
+        .end    = 3,
+        .flags  = IORESOURCE_IRQ,
+};
+static struct resource omap3_pmu_resource = {
+        .start  = INT_34XX_BENCH_MPU_EMUL,
+        .end    = INT_34XX_BENCH_MPU_EMUL,
+        .flags  = IORESOURCE_IRQ,
+};
+static struct platform_device omap_pmu_device = {
+        .name           = "arm-pmu",
+        .id             = ARM_PMU_DEVICE_CPU,
+        .num_resources  = 1,
+};
+static void omap_init_pmu(void)
+{
+        if (cpu_is_omap24xx())
+                omap_pmu_device.resource = &omap2_pmu_resource;
+        else if (cpu_is_omap34xx())
+                omap_pmu_device.resource = &omap3_pmu_resource;
+        else
+                return;
+        platform_device_register(&omap_pmu_device);
+}
 #ifdef CONFIG_OMAP_SHA1_MD5
 static struct resource sha1_md5_resources[] = {
        {
@@ -797,6 +830,7 @@ static int __init omap2_init_devices(void)
        omap_init_camera();
        omap_init_mbox();
        omap_init_mcspi();
+        omap_init_pmu();
        omap_hdq_init();
        omap_init_sti();
        omap_init_sha1_md5();
diff --git a/arch/arm/mach-realview/Makefile b/arch/arm/mach-realview/Makefile
index e704edb733c0..a01b76b7c956 100644
--- a/arch/arm/mach-realview/Makefile
+++ b/arch/arm/mach-realview/Makefile
@@ -2,7 +2,7 @@
 # Makefile for the linux kernel.
 #
-obj-y                                   := core.o clock.o
+obj-y                                   := core.o
 obj-$(CONFIG_MACH_REALVIEW_EB)          += realview_eb.o
 obj-$(CONFIG_MACH_REALVIEW_PB11MP)      += realview_pb11mp.o
 obj-$(CONFIG_MACH_REALVIEW_PB1176)      += realview_pb1176.o
diff --git a/arch/arm/mach-realview/clock.c b/arch/arm/mach-realview/clock.c
deleted file mode 100644
index a7043115de72..000000000000
--- a/arch/arm/mach-realview/clock.c
+++ /dev/null
@@ -1,64 +0,0 @@
-/*
- *  linux/arch/arm/mach-realview/clock.c
- *
- *  Copyright (C) 2004 ARM Limited.
- *  Written by Deep Blue Solutions Limited.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/device.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/string.h>
-#include <linux/clk.h>
-#include <linux/mutex.h>
-#include <asm/hardware/icst307.h>
-#include "clock.h"
-int clk_enable(struct clk *clk)
-{
-        return 0;
-}
-EXPORT_SYMBOL(clk_enable);
-void clk_disable(struct clk *clk)
-{
-}
-EXPORT_SYMBOL(clk_disable);
-unsigned long clk_get_rate(struct clk *clk)
-{
-        return clk->rate;
-}
-EXPORT_SYMBOL(clk_get_rate);
-long clk_round_rate(struct clk *clk, unsigned long rate)
-{
-        struct icst307_vco vco;
-        vco = icst307_khz_to_vco(clk->params, rate / 1000);
-        return icst307_khz(clk->params, vco) * 1000;
-}
-EXPORT_SYMBOL(clk_round_rate);
-int clk_set_rate(struct clk *clk, unsigned long rate)
-{
-        int ret = -EIO;
-        if (clk->setvco) {
-                struct icst307_vco vco;
-                vco = icst307_khz_to_vco(clk->params, rate / 1000);
-                clk->rate = icst307_khz(clk->params, vco) * 1000;
-                clk->setvco(clk, vco);
-                ret = 0;
-        }
-        return ret;
-}
-EXPORT_SYMBOL(clk_set_rate);
diff --git a/arch/arm/mach-realview/clock.h b/arch/arm/mach-realview/clock.h
deleted file mode 100644
index ebbb0f06b600..000000000000
--- a/arch/arm/mach-realview/clock.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- *  linux/arch/arm/mach-realview/clock.h
- *
- *  Copyright (C) 2004 ARM Limited.
- *  Written by Deep Blue Solutions Limited.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-struct module;
-struct icst307_params;
-struct clk {
-        unsigned long           rate;
-        const struct icst307_params *params;
-        void                    *data;
-        void                    (*setvco)(struct clk *, struct icst307_vco vco);
-};
diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c
index 90bd4ef71b2c..1b468bd490af 100644
--- a/arch/arm/mach-realview/core.c
+++ b/arch/arm/mach-realview/core.c
@@ -25,8 +25,6 @@
 #include <linux/interrupt.h>
 #include <linux/amba/bus.h>
 #include <linux/amba/clcd.h>
-#include <linux/clocksource.h>
-#include <linux/clockchips.h>
 #include <linux/io.h>
 #include <linux/smsc911x.h>
 #include <linux/ata_platform.h>
@@ -39,7 +37,7 @@
 #include <asm/leds.h>
 #include <asm/mach-types.h>
 #include <asm/hardware/arm_timer.h>
-#include <asm/hardware/icst307.h>
+#include <asm/hardware/icst.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
@@ -48,13 +46,12 @@
 #include <asm/hardware/gic.h>
+#include <mach/clkdev.h>
 #include <mach/platform.h>
 #include <mach/irqs.h>
+#include <plat/timer-sp.h>
 #include "core.h"
-#include "clock.h"
-#define REALVIEW_REFCOUNTER     (__io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_24MHz_OFFSET)
 /* used by entry-macro.S and platsmp.c */
 void __iomem *gic_cpu_base_addr;
@@ -78,20 +75,6 @@ void __init realview_adjust_zones(int node, unsigned long *size,
 }
 #endif
-/*
- * This is the RealView sched_clock implementation.  This has
- * a resolution of 41.7ns, and a maximum value of about 179s.
- */
-unsigned long long sched_clock(void)
-{
-        unsigned long long v;
-        v = (unsigned long long)readl(REALVIEW_REFCOUNTER) * 125;
-        do_div(v, 3);
-        return v;
-}
 #define REALVIEW_FLASHCTRL    (__io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_FLASH_OFFSET)
@@ -273,37 +256,40 @@ struct mmci_platform_data realview_mmc1_plat_data = {
 /*
 * Clock handling
 */
-static const struct icst307_params realview_oscvco_params = {
+static const struct icst_params realview_oscvco_params = {
-        .ref            = 24000,
+        .ref            = 24000000,
-        .vco_max        = 200000,
+        .vco_max        = ICST307_VCO_MAX,
+        .vco_min        = ICST307_VCO_MIN,
        .vd_min         = 4 + 8,
        .vd_max         = 511 + 8,
        .rd_min         = 1 + 2,
        .rd_max         = 127 + 2,
+        .s2div          = icst307_s2div,
+        .idx2s          = icst307_idx2s,
 };
-static void realview_oscvco_set(struct clk *clk, struct icst307_vco vco)
+static void realview_oscvco_set(struct clk *clk, struct icst_vco vco)
 {
        void __iomem *sys_lock = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_LOCK_OFFSET;
-        void __iomem *sys_osc;
        u32 val;
-        if (machine_is_realview_pb1176())
+        val = readl(clk->vcoreg) & ~0x7ffff;
-                sys_osc = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_OSC0_OFFSET;
-        else
-                sys_osc = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_OSC4_OFFSET;
-        val = readl(sys_osc) & ~0x7ffff;
        val |= vco.v | (vco.r << 9) | (vco.s << 16);
        writel(0xa05f, sys_lock);
-        writel(val, sys_osc);
+        writel(val, clk->vcoreg);
        writel(0, sys_lock);
 }
+static const struct clk_ops oscvco_clk_ops = {
+        .round  = icst_clk_round,
+        .set    = icst_clk_set,
+        .setvco = realview_oscvco_set,
+};
 static struct clk oscvco_clk = {
+        .ops    = &oscvco_clk_ops,
        .params = &realview_oscvco_params,
-        .setvco = realview_oscvco_set,
 };
 /*
@@ -346,7 +332,13 @@ static struct clk_lookup lookups[] = {
 static int __init clk_init(void)
 {
+        if (machine_is_realview_pb1176())
+                oscvco_clk.vcoreg = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_OSC0_OFFSET;
+        else
+                oscvco_clk.vcoreg = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_OSC4_OFFSET;
        clkdev_add_table(lookups, ARRAY_SIZE(lookups));
        return 0;
 }
 arch_initcall(clk_init);
@@ -643,133 +635,6 @@ void __iomem *timer2_va_base;
 void __iomem *timer3_va_base;
 /*
- * How long is the timer interval?
- */
-#define TIMER_INTERVAL  (TICKS_PER_uSEC * mSEC_10)
-#if TIMER_INTERVAL >= 0x100000
-#define TIMER_RELOAD    (TIMER_INTERVAL >> 8)
-#define TIMER_DIVISOR   (TIMER_CTRL_DIV256)
-#define TICKS2USECS(x)  (256 * (x) / TICKS_PER_uSEC)
-#elif TIMER_INTERVAL >= 0x10000
-#define TIMER_RELOAD    (TIMER_INTERVAL >> 4)           /* Divide by 16 */
-#define TIMER_DIVISOR   (TIMER_CTRL_DIV16)
-#define TICKS2USECS(x)  (16 * (x) / TICKS_PER_uSEC)
-#else
-#define TIMER_RELOAD    (TIMER_INTERVAL)
-#define TIMER_DIVISOR   (TIMER_CTRL_DIV1)
-#define TICKS2USECS(x)  ((x) / TICKS_PER_uSEC)
-#endif
-static void timer_set_mode(enum clock_event_mode mode,
-                           struct clock_event_device *clk)
-{
-        unsigned long ctrl;
-        switch(mode) {
-        case CLOCK_EVT_MODE_PERIODIC:
-                writel(TIMER_RELOAD, timer0_va_base + TIMER_LOAD);
-                ctrl = TIMER_CTRL_PERIODIC;
-                ctrl |= TIMER_CTRL_32BIT | TIMER_CTRL_IE | TIMER_CTRL_ENABLE;
-                break;
-        case CLOCK_EVT_MODE_ONESHOT:
-                /* period set, and timer enabled in 'next_event' hook */
-                ctrl = TIMER_CTRL_ONESHOT;
-                ctrl |= TIMER_CTRL_32BIT | TIMER_CTRL_IE;
-                break;
-        case CLOCK_EVT_MODE_UNUSED:
-        case CLOCK_EVT_MODE_SHUTDOWN:
-        default:
-                ctrl = 0;
-        }
-        writel(ctrl, timer0_va_base + TIMER_CTRL);
-}
-static int timer_set_next_event(unsigned long evt,
-                                struct clock_event_device *unused)
-{
-        unsigned long ctrl = readl(timer0_va_base + TIMER_CTRL);
-        writel(evt, timer0_va_base + TIMER_LOAD);
-        writel(ctrl | TIMER_CTRL_ENABLE, timer0_va_base + TIMER_CTRL);
-        return 0;
-}
-static struct clock_event_device timer0_clockevent =     {
-        .name           = "timer0",
-        .shift          = 32,
-        .features       = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
-        .set_mode       = timer_set_mode,
-        .set_next_event = timer_set_next_event,
-        .rating         = 300,
-        .cpumask        = cpu_all_mask,
-};
-static void __init realview_clockevents_init(unsigned int timer_irq)
-{
-        timer0_clockevent.irq = timer_irq;
-        timer0_clockevent.mult =
-                div_sc(1000000, NSEC_PER_SEC, timer0_clockevent.shift);
-        timer0_clockevent.max_delta_ns =
-                clockevent_delta2ns(0xffffffff, &timer0_clockevent);
-        timer0_clockevent.min_delta_ns =
-                clockevent_delta2ns(0xf, &timer0_clockevent);
-        clockevents_register_device(&timer0_clockevent);
-}
-/*
- * IRQ handler for the timer
- */
-static irqreturn_t realview_timer_interrupt(int irq, void *dev_id)
-{
-        struct clock_event_device *evt = &timer0_clockevent;
-        /* clear the interrupt */
-        writel(1, timer0_va_base + TIMER_INTCLR);
-        evt->event_handler(evt);
-        return IRQ_HANDLED;
-}
-static struct irqaction realview_timer_irq = {
-        .name           = "RealView Timer Tick",
-        .flags          = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
-        .handler        = realview_timer_interrupt,
-};
-static cycle_t realview_get_cycles(struct clocksource *cs)
-{
-        return ~readl(timer3_va_base + TIMER_VALUE);
-}
-static struct clocksource clocksource_realview = {
-        .name   = "timer3",
-        .rating = 200,
-        .read   = realview_get_cycles,
-        .mask   = CLOCKSOURCE_MASK(32),
-        .shift  = 20,
-        .flags  = CLOCK_SOURCE_IS_CONTINUOUS,
-};
-static void __init realview_clocksource_init(void)
-{
-        /* setup timer 0 as free-running clocksource */
-        writel(0, timer3_va_base + TIMER_CTRL);
-        writel(0xffffffff, timer3_va_base + TIMER_LOAD);
-        writel(0xffffffff, timer3_va_base + TIMER_VALUE);
-        writel(TIMER_CTRL_32BIT | TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC,
-                timer3_va_base + TIMER_CTRL);
-        clocksource_realview.mult =
-                clocksource_khz2mult(1000, clocksource_realview.shift);
-        clocksource_register(&clocksource_realview);
-}
-/*
 * Set up the clock source and clock events devices
 */
 void __init realview_timer_init(unsigned int timer_irq)
@@ -796,13 +661,8 @@ void __init realview_timer_init(unsigned int timer_irq)
        writel(0, timer2_va_base + TIMER_CTRL);
        writel(0, timer3_va_base + TIMER_CTRL);
-        /* 
+        sp804_clocksource_init(timer3_va_base);
-         * Make irqs happen for the system timer
+        sp804_clockevents_init(timer0_va_base, timer_irq);
-         */
-        setup_irq(timer_irq, &realview_timer_irq);
-        realview_clocksource_init();
-        realview_clockevents_init(timer_irq);
 }
 /*
diff --git a/arch/arm/mach-realview/include/mach/clkdev.h b/arch/arm/mach-realview/include/mach/clkdev.h
index 04b37a89801c..e58d0771b64e 100644
--- a/arch/arm/mach-realview/include/mach/clkdev.h
+++ b/arch/arm/mach-realview/include/mach/clkdev.h
@@ -1,6 +1,15 @@
 #ifndef __ASM_MACH_CLKDEV_H
 #define __ASM_MACH_CLKDEV_H
+#include <plat/clock.h>
+struct clk {
+        unsigned long           rate;
+        const struct clk_ops    *ops;
+        const struct icst_params *params;
+        void __iomem            *vcoreg;
+};
 #define __clk_get(clk) ({ 1; })
 #define __clk_put(clk) do { } while (0)
diff --git a/arch/arm/mach-realview/include/mach/irqs-pb1176.h b/arch/arm/mach-realview/include/mach/irqs-pb1176.h
index 2410d4f8ddd3..830055bb8628 100644
--- a/arch/arm/mach-realview/include/mach/irqs-pb1176.h
+++ b/arch/arm/mach-realview/include/mach/irqs-pb1176.h
@@ -31,6 +31,7 @@
 #define IRQ_DC1176_SOFTINT      (IRQ_DC1176_GIC_START + 1)      /* Software interrupt */
 #define IRQ_DC1176_COMMRx       (IRQ_DC1176_GIC_START + 2)      /* Debug Comm Rx interrupt */
 #define IRQ_DC1176_COMMTx       (IRQ_DC1176_GIC_START + 3)      /* Debug Comm Tx interrupt */
+#define IRQ_DC1176_CORE_PMU     (IRQ_DC1176_GIC_START + 7)      /* Core PMU interrupt */
 #define IRQ_DC1176_TIMER0       (IRQ_DC1176_GIC_START + 8)      /* Timer 0 */
 #define IRQ_DC1176_TIMER1       (IRQ_DC1176_GIC_START + 9)      /* Timer 1 */
 #define IRQ_DC1176_TIMER2       (IRQ_DC1176_GIC_START + 10)     /* Timer 2 */
diff --git a/arch/arm/mach-realview/include/mach/irqs-pba8.h b/arch/arm/mach-realview/include/mach/irqs-pba8.h
index 86792a9f2ab6..4a88a4edb651 100644
--- a/arch/arm/mach-realview/include/mach/irqs-pba8.h
+++ b/arch/arm/mach-realview/include/mach/irqs-pba8.h
@@ -23,12 +23,6 @@
 #define IRQ_PBA8_GIC_START                      32
-/* L220
-#define IRQ_PBA8_L220_EVENT     (IRQ_PBA8_GIC_START + 29)
-#define IRQ_PBA8_L220_SLAVE     (IRQ_PBA8_GIC_START + 30)
-#define IRQ_PBA8_L220_DECODE    (IRQ_PBA8_GIC_START + 31)
-*/
 /*
 * PB-A8 on-board gic irq sources
 */
@@ -65,6 +59,8 @@
 #define IRQ_PBA8_TSPEN          (IRQ_PBA8_GIC_START + 30)       /* Touchscreen pen */
 #define IRQ_PBA8_TSKPAD         (IRQ_PBA8_GIC_START + 31)       /* Touchscreen keypad */
+#define IRQ_PBA8_PMU            (IRQ_PBA8_GIC_START + 47)       /* Cortex-A8 PMU */
 /* ... */
 #define IRQ_PBA8_PCI0           (IRQ_PBA8_GIC_START + 50)
 #define IRQ_PBA8_PCI1           (IRQ_PBA8_GIC_START + 51)
diff --git a/arch/arm/mach-realview/include/mach/irqs-pbx.h b/arch/arm/mach-realview/include/mach/irqs-pbx.h
index deaad4302b17..206a3001f46b 100644
--- a/arch/arm/mach-realview/include/mach/irqs-pbx.h
+++ b/arch/arm/mach-realview/include/mach/irqs-pbx.h
@@ -22,12 +22,6 @@
 #define IRQ_PBX_GIC_START                       32
-/* L220
-#define IRQ_PBX_L220_EVENT      (IRQ_PBX_GIC_START + 29)
-#define IRQ_PBX_L220_SLAVE      (IRQ_PBX_GIC_START + 30)
-#define IRQ_PBX_L220_DECODE     (IRQ_PBX_GIC_START + 31)
-*/
 /*
 * PBX on-board gic irq sources
 */
@@ -77,10 +71,10 @@
 #define IRQ_PBX_TIMER4_5        (IRQ_PBX_GIC_START + 41)        /* Timer 0/1 (default timer) */
 #define IRQ_PBX_TIMER6_7        (IRQ_PBX_GIC_START + 42)        /* Timer 2/3 */
 /* ... */
-#define IRQ_PBX_PMU_CPU3        (IRQ_PBX_GIC_START + 44)        /* CPU PMU Interrupts */
+#define IRQ_PBX_PMU_CPU0        (IRQ_PBX_GIC_START + 44)        /* CPU PMU Interrupts */
-#define IRQ_PBX_PMU_CPU2        (IRQ_PBX_GIC_START + 45)
+#define IRQ_PBX_PMU_CPU1        (IRQ_PBX_GIC_START + 45)
-#define IRQ_PBX_PMU_CPU1        (IRQ_PBX_GIC_START + 46)
+#define IRQ_PBX_PMU_CPU2        (IRQ_PBX_GIC_START + 46)
-#define IRQ_PBX_PMU_CPU0        (IRQ_PBX_GIC_START + 47)
+#define IRQ_PBX_PMU_CPU3        (IRQ_PBX_GIC_START + 47)
 /* ... */
 #define IRQ_PBX_PCI0            (IRQ_PBX_GIC_START + 50)
diff --git a/arch/arm/mach-realview/include/mach/platform.h b/arch/arm/mach-realview/include/mach/platform.h
index 86c0c4435a46..1b77a27badaf 100644
--- a/arch/arm/mach-realview/include/mach/platform.h
+++ b/arch/arm/mach-realview/include/mach/platform.h
@@ -231,12 +231,6 @@
 #define REALVIEW_INTREG_OFFSET          0x8     /* Interrupt control */
 #define REALVIEW_DECODE_OFFSET          0xC     /* Fitted logic modules */
-/* 
- *  Clean base - dummy
- * 
- */
-#define CLEAN_BASE                      REALVIEW_BOOT_ROM_HI
 /*
 * System controller bit assignment
 */
@@ -249,20 +243,6 @@
 #define REALVIEW_TIMER4_EnSel   21
-#define MAX_TIMER                       2
-#define MAX_PERIOD                      699050
-#define TICKS_PER_uSEC                  1
-/* 
- *  These are useconds NOT ticks.  
- * 
- */
-#define mSEC_1                          1000
-#define mSEC_5                          (mSEC_1 * 5)
-#define mSEC_10                         (mSEC_1 * 10)
-#define mSEC_25                         (mSEC_1 * 25)
-#define SEC_1                           (mSEC_1 * 1000)
 #define REALVIEW_CSR_BASE             0x10000000
 #define REALVIEW_CSR_SIZE             0x10000000
diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c
index 7d857d300558..422ccd70d5f5 100644
--- a/arch/arm/mach-realview/realview_eb.c
+++ b/arch/arm/mach-realview/realview_eb.c
@@ -31,8 +31,8 @@
 #include <asm/irq.h>
 #include <asm/leds.h>
 #include <asm/mach-types.h>
+#include <asm/pmu.h>
 #include <asm/hardware/gic.h>
-#include <asm/hardware/icst307.h>
 #include <asm/hardware/cache-l2x0.h>
 #include <asm/localtimer.h>
@@ -44,7 +44,6 @@
 #include <mach/irqs.h>
 #include "core.h"
-#include "clock.h"
 static struct map_desc realview_eb_io_desc[] __initdata = {
        {
@@ -294,6 +293,36 @@ static struct resource realview_eb_isp1761_resources[] = {
        },
 };
+static struct resource pmu_resources[] = {
+        [0] = {
+                .start          = IRQ_EB11MP_PMU_CPU0,
+                .end            = IRQ_EB11MP_PMU_CPU0,
+                .flags          = IORESOURCE_IRQ,
+        },
+        [1] = {
+                .start          = IRQ_EB11MP_PMU_CPU1,
+                .end            = IRQ_EB11MP_PMU_CPU1,
+                .flags          = IORESOURCE_IRQ,
+        },
+        [2] = {
+                .start          = IRQ_EB11MP_PMU_CPU2,
+                .end            = IRQ_EB11MP_PMU_CPU2,
+                .flags          = IORESOURCE_IRQ,
+        },
+        [3] = {
+                .start          = IRQ_EB11MP_PMU_CPU3,
+                .end            = IRQ_EB11MP_PMU_CPU3,
+                .flags          = IORESOURCE_IRQ,
+        },
+};
+static struct platform_device pmu_device = {
+        .name                   = "arm-pmu",
+        .id                     = ARM_PMU_DEVICE_CPU,
+        .num_resources          = ARRAY_SIZE(pmu_resources),
+        .resource               = pmu_resources,
+};
 static void __init gic_init_irq(void)
 {
        if (core_tile_eb11mp() || core_tile_a9mp()) {
@@ -407,6 +436,7 @@ static void __init realview_eb_init(void)
                 * Bits:  .... ...0 0111 1001 0000 .... .... .... */
                l2x0_init(__io_address(REALVIEW_EB11MP_L220_BASE), 0x00790000, 0xfe000fff);
 #endif
+                platform_device_register(&pmu_device);
        }
        realview_flash_register(&realview_eb_flash_resource, 1);
diff --git a/arch/arm/mach-realview/realview_pb1176.c b/arch/arm/mach-realview/realview_pb1176.c
index 44392e51dd50..96568ebfa2bb 100644
--- a/arch/arm/mach-realview/realview_pb1176.c
+++ b/arch/arm/mach-realview/realview_pb1176.c
@@ -31,8 +31,8 @@
 #include <asm/irq.h>
 #include <asm/leds.h>
 #include <asm/mach-types.h>
+#include <asm/pmu.h>
 #include <asm/hardware/gic.h>
-#include <asm/hardware/icst307.h>
 #include <asm/hardware/cache-l2x0.h>
 #include <asm/mach/arch.h>
@@ -44,7 +44,6 @@
 #include <mach/irqs.h>
 #include "core.h"
-#include "clock.h"
 static struct map_desc realview_pb1176_io_desc[] __initdata = {
        {
@@ -263,6 +262,19 @@ static struct resource realview_pb1176_isp1761_resources[] = {
        },
 };
+static struct resource pmu_resource = {
+        .start          = IRQ_DC1176_CORE_PMU,
+        .end            = IRQ_DC1176_CORE_PMU,
+        .flags          = IORESOURCE_IRQ,
+};
+static struct platform_device pmu_device = {
+        .name                   = "arm-pmu",
+        .id                     = ARM_PMU_DEVICE_CPU,
+        .num_resources          = 1,
+        .resource               = &pmu_resource,
+};
 static void __init gic_init_irq(void)
 {
        /* ARM1176 DevChip GIC, primary */
@@ -324,6 +336,7 @@ static void __init realview_pb1176_init(void)
        realview_eth_register(NULL, realview_pb1176_smsc911x_resources);
        platform_device_register(&realview_i2c_device);
        realview_usb_register(realview_pb1176_isp1761_resources);
+        platform_device_register(&pmu_device);
        for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
                struct amba_device *d = amba_devs[i];
diff --git a/arch/arm/mach-realview/realview_pb11mp.c b/arch/arm/mach-realview/realview_pb11mp.c
index 3e02731af959..7fbefbbebaf0 100644
--- a/arch/arm/mach-realview/realview_pb11mp.c
+++ b/arch/arm/mach-realview/realview_pb11mp.c
@@ -31,8 +31,8 @@
 #include <asm/irq.h>
 #include <asm/leds.h>
 #include <asm/mach-types.h>
+#include <asm/pmu.h>
 #include <asm/hardware/gic.h>
-#include <asm/hardware/icst307.h>
 #include <asm/hardware/cache-l2x0.h>
 #include <asm/localtimer.h>
@@ -45,7 +45,6 @@
 #include <mach/irqs.h>
 #include "core.h"
-#include "clock.h"
 static struct map_desc realview_pb11mp_io_desc[] __initdata = {
        {
@@ -260,6 +259,36 @@ static struct resource realview_pb11mp_isp1761_resources[] = {
        },
 };
+static struct resource pmu_resources[] = {
+        [0] = {
+                .start          = IRQ_TC11MP_PMU_CPU0,
+                .end            = IRQ_TC11MP_PMU_CPU0,
+                .flags          = IORESOURCE_IRQ,
+        },
+        [1] = {
+                .start          = IRQ_TC11MP_PMU_CPU1,
+                .end            = IRQ_TC11MP_PMU_CPU1,
+                .flags          = IORESOURCE_IRQ,
+        },
+        [2] = {
+                .start          = IRQ_TC11MP_PMU_CPU2,
+                .end            = IRQ_TC11MP_PMU_CPU2,
+                .flags          = IORESOURCE_IRQ,
+        },
+        [3] = {
+                .start          = IRQ_TC11MP_PMU_CPU3,
+                .end            = IRQ_TC11MP_PMU_CPU3,
+                .flags          = IORESOURCE_IRQ,
+        },
+};
+static struct platform_device pmu_device = {
+        .name                   = "arm-pmu",
+        .id                     = ARM_PMU_DEVICE_CPU,
+        .num_resources          = ARRAY_SIZE(pmu_resources),
+        .resource               = pmu_resources,
+};
 static void __init gic_init_irq(void)
 {
        unsigned int pldctrl;
@@ -329,6 +358,7 @@ static void __init realview_pb11mp_init(void)
        platform_device_register(&realview_i2c_device);
        platform_device_register(&realview_cf_device);
        realview_usb_register(realview_pb11mp_isp1761_resources);
+        platform_device_register(&pmu_device);
        for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
                struct amba_device *d = amba_devs[i];
diff --git a/arch/arm/mach-realview/realview_pba8.c b/arch/arm/mach-realview/realview_pba8.c
index fe4e25c4201a..d3c113b3dfce 100644
--- a/arch/arm/mach-realview/realview_pba8.c
+++ b/arch/arm/mach-realview/realview_pba8.c
@@ -30,8 +30,8 @@
 #include <asm/irq.h>
 #include <asm/leds.h>
 #include <asm/mach-types.h>
+#include <asm/pmu.h>
 #include <asm/hardware/gic.h>
-#include <asm/hardware/icst307.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -42,7 +42,6 @@
 #include <mach/irqs.h>
 #include "core.h"
-#include "clock.h"
 static struct map_desc realview_pba8_io_desc[] __initdata = {
        {
@@ -250,6 +249,19 @@ static struct resource realview_pba8_isp1761_resources[] = {
        },
 };
+static struct resource pmu_resource = {
+        .start          = IRQ_PBA8_PMU,
+        .end            = IRQ_PBA8_PMU,
+        .flags          = IORESOURCE_IRQ,
+};
+static struct platform_device pmu_device = {
+        .name                   = "arm-pmu",
+        .id                     = ARM_PMU_DEVICE_CPU,
+        .num_resources          = 1,
+        .resource               = &pmu_resource,
+};
 static void __init gic_init_irq(void)
 {
        /* ARM PB-A8 on-board GIC */
@@ -296,6 +308,7 @@ static void __init realview_pba8_init(void)
        platform_device_register(&realview_i2c_device);
        platform_device_register(&realview_cf_device);
        realview_usb_register(realview_pba8_isp1761_resources);
+        platform_device_register(&pmu_device);
        for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
                struct amba_device *d = amba_devs[i];
diff --git a/arch/arm/mach-realview/realview_pbx.c b/arch/arm/mach-realview/realview_pbx.c
index d94857eb0690..a235ba30996b 100644
--- a/arch/arm/mach-realview/realview_pbx.c
+++ b/arch/arm/mach-realview/realview_pbx.c
@@ -29,6 +29,7 @@
 #include <asm/irq.h>
 #include <asm/leds.h>
 #include <asm/mach-types.h>
+#include <asm/pmu.h>
 #include <asm/smp_twd.h>
 #include <asm/hardware/gic.h>
 #include <asm/hardware/cache-l2x0.h>
@@ -270,6 +271,36 @@ static struct resource realview_pbx_isp1761_resources[] = {
        },
 };
+static struct resource pmu_resources[] = {
+        [0] = {
+                .start          = IRQ_PBX_PMU_CPU0,
+                .end            = IRQ_PBX_PMU_CPU0,
+                .flags          = IORESOURCE_IRQ,
+        },
+        [1] = {
+                .start          = IRQ_PBX_PMU_CPU1,
+                .end            = IRQ_PBX_PMU_CPU1,
+                .flags          = IORESOURCE_IRQ,
+        },
+        [2] = {
+                .start          = IRQ_PBX_PMU_CPU2,
+                .end            = IRQ_PBX_PMU_CPU2,
+                .flags          = IORESOURCE_IRQ,
+        },
+        [3] = {
+                .start          = IRQ_PBX_PMU_CPU3,
+                .end            = IRQ_PBX_PMU_CPU3,
+                .flags          = IORESOURCE_IRQ,
+        },
+};
+static struct platform_device pmu_device = {
+        .name                   = "arm-pmu",
+        .id                     = ARM_PMU_DEVICE_CPU,
+        .num_resources          = ARRAY_SIZE(pmu_resources),
+        .resource               = pmu_resources,
+};
 static void __init gic_init_irq(void)
 {
        /* ARM PBX on-board GIC */
@@ -354,6 +385,7 @@ static void __init realview_pbx_init(void)
                /* 16KB way size, 8-way associativity, parity disabled
                 * Bits:  .. 0 0 0 0 1 00 1 0 1 001 0 000 0 .... .... .... */
                l2x0_init(l2x0_base, 0x02520000, 0xc0000fff);
+                platform_device_register(&pmu_device);
        }
 #endif
diff --git a/arch/arm/mach-spear3xx/Kconfig b/arch/arm/mach-spear3xx/Kconfig
new file mode 100644
index 000000000000..20d1317cc486
--- /dev/null
+++ b/arch/arm/mach-spear3xx/Kconfig
@@ -0,0 +1,33 @@
+#
+# SPEAr3XX Machine configuration file
+#
+if ARCH_SPEAR3XX
+choice
+        prompt "SPEAr3XX Family"
+        default MACH_SPEAR300
+config MACH_SPEAR300
+        bool "SPEAr300"
+        help
+          Supports ST SPEAr300 Machine
+config MACH_SPEAR310
+        bool "SPEAr310"
+        help
+          Supports ST SPEAr310 Machine
+config MACH_SPEAR320
+        bool "SPEAr320"
+        help
+          Supports ST SPEAr320 Machine
+endchoice
+# Adding SPEAr3XX machine specific configuration files
+source "arch/arm/mach-spear3xx/Kconfig300"
+source "arch/arm/mach-spear3xx/Kconfig310"
+source "arch/arm/mach-spear3xx/Kconfig320"
+endif #ARCH_SPEAR3XX
diff --git a/arch/arm/mach-spear3xx/Kconfig300 b/arch/arm/mach-spear3xx/Kconfig300
new file mode 100644
index 000000000000..c519a05b4ab4
--- /dev/null
+++ b/arch/arm/mach-spear3xx/Kconfig300
@@ -0,0 +1,17 @@
+#
+# SPEAr300 machine configuration file
+#
+if MACH_SPEAR300
+choice
+        prompt "SPEAr300 Boards"
+        default BOARD_SPEAR300_EVB
+config BOARD_SPEAR300_EVB
+        bool "SPEAr300 Evaluation Board"
+        help
+          Supports ST SPEAr300 Evaluation Board
+endchoice
+endif   #MACH_SPEAR300
diff --git a/arch/arm/mach-spear3xx/Kconfig310 b/arch/arm/mach-spear3xx/Kconfig310
new file mode 100644
index 000000000000..60e7442d75bd
--- /dev/null
+++ b/arch/arm/mach-spear3xx/Kconfig310
@@ -0,0 +1,17 @@
+#
+# SPEAr310 machine configuration file
+#
+if MACH_SPEAR310
+choice
+        prompt "SPEAr310 Boards"
+        default BOARD_SPEAR310_EVB
+config BOARD_SPEAR310_EVB
+        bool "SPEAr310 Evaluation Board"
+        help
+          Supports ST SPEAr310 Evaluation Board
+endchoice
+endif   #MACH_SPEAR310
diff --git a/arch/arm/mach-spear3xx/Kconfig320 b/arch/arm/mach-spear3xx/Kconfig320
new file mode 100644
index 000000000000..1c1d438399b8
--- /dev/null
+++ b/arch/arm/mach-spear3xx/Kconfig320
@@ -0,0 +1,17 @@
+#
+# SPEAr320 machine configuration file
+#
+if MACH_SPEAR320
+choice
+        prompt "SPEAr320 Boards"
+        default BOARD_SPEAR320_EVB
+config BOARD_SPEAR320_EVB
+        bool "SPEAr320 Evaluation Board"
+        help
+          Supports ST SPEAr320 Evaluation Board
+endchoice
+endif   #MACH_SPEAR320
diff --git a/arch/arm/mach-spear3xx/Makefile b/arch/arm/mach-spear3xx/Makefile
new file mode 100644
index 000000000000..b24862489704
--- /dev/null
+++ b/arch/arm/mach-spear3xx/Makefile
@@ -0,0 +1,26 @@
+#
+# Makefile for SPEAr3XX machine series
+#
+# common files
+obj-y   += spear3xx.o clock.o
+# spear300 specific files
+obj-$(CONFIG_MACH_SPEAR300) += spear300.o
+# spear300 boards files
+obj-$(CONFIG_BOARD_SPEAR300_EVB) += spear300_evb.o
+# spear310 specific files
+obj-$(CONFIG_MACH_SPEAR310) += spear310.o
+# spear310 boards files
+obj-$(CONFIG_BOARD_SPEAR310_EVB) += spear310_evb.o
+# spear320 specific files
+obj-$(CONFIG_MACH_SPEAR320) += spear320.o
+# spear320 boards files
+obj-$(CONFIG_BOARD_SPEAR320_EVB) += spear320_evb.o
diff --git a/arch/arm/mach-spear3xx/Makefile.boot b/arch/arm/mach-spear3xx/Makefile.boot
new file mode 100644
index 000000000000..7a1f3c0eadb8
--- /dev/null
+++ b/arch/arm/mach-spear3xx/Makefile.boot
@@ -0,0 +1,3 @@
+zreladdr-y      := 0x00008000
+params_phys-y   := 0x00000100
+initrd_phys-y   := 0x00800000
diff --git a/arch/arm/mach-spear3xx/clock.c b/arch/arm/mach-spear3xx/clock.c
new file mode 100644
index 000000000000..39f6ccf22294
--- /dev/null
+++ b/arch/arm/mach-spear3xx/clock.c
@@ -0,0 +1,389 @@
+/*
+ * arch/arm/mach-spear3xx/clock.c
+ *
+ * SPEAr3xx machines clock framework source file
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <mach/misc_regs.h>
+#include <plat/clock.h>
+/* root clks */
+/* 32 KHz oscillator clock */
+static struct clk osc_32k_clk = {
+        .flags = ALWAYS_ENABLED,
+        .rate = 32000,
+};
+/* 24 MHz oscillator clock */
+static struct clk osc_24m_clk = {
+        .flags = ALWAYS_ENABLED,
+        .rate = 24000000,
+};
+/* clock derived from 32 KHz osc clk */
+/* rtc clock */
+static struct clk rtc_clk = {
+        .pclk = &osc_32k_clk,
+        .en_reg = PERIP1_CLK_ENB,
+        .en_reg_bit = RTC_CLK_ENB,
+        .recalc = &follow_parent,
+};
+/* clock derived from 24 MHz osc clk */
+/* pll1 configuration structure */
+static struct pll_clk_config pll1_config = {
+        .mode_reg = PLL1_CTR,
+        .cfg_reg = PLL1_FRQ,
+};
+/* PLL1 clock */
+static struct clk pll1_clk = {
+        .pclk = &osc_24m_clk,
+        .en_reg = PLL1_CTR,
+        .en_reg_bit = PLL_ENABLE,
+        .recalc = &pll1_clk_recalc,
+        .private_data = &pll1_config,
+};
+/* PLL3 48 MHz clock */
+static struct clk pll3_48m_clk = {
+        .flags = ALWAYS_ENABLED,
+        .pclk = &osc_24m_clk,
+        .rate = 48000000,
+};
+/* watch dog timer clock */
+static struct clk wdt_clk = {
+        .flags = ALWAYS_ENABLED,
+        .pclk = &osc_24m_clk,
+        .recalc = &follow_parent,
+};
+/* clock derived from pll1 clk */
+/* cpu clock */
+static struct clk cpu_clk = {
+        .flags = ALWAYS_ENABLED,
+        .pclk = &pll1_clk,
+        .recalc = &follow_parent,
+};
+/* ahb configuration structure */
+static struct bus_clk_config ahb_config = {
+        .reg = CORE_CLK_CFG,
+        .mask = PLL_HCLK_RATIO_MASK,
+        .shift = PLL_HCLK_RATIO_SHIFT,
+};
+/* ahb clock */
+static struct clk ahb_clk = {
+        .flags = ALWAYS_ENABLED,
+        .pclk = &pll1_clk,
+        .recalc = &bus_clk_recalc,
+        .private_data = &ahb_config,
+};
+/* uart configurations */
+static struct aux_clk_config uart_config = {
+        .synth_reg = UART_CLK_SYNT,
+};
+/* uart parents */
+static struct pclk_info uart_pclk_info[] = {
+        {
+                .pclk = &pll1_clk,
+                .pclk_mask = AUX_CLK_PLL1_MASK,
+                .scalable = 1,
+        }, {
+                .pclk = &pll3_48m_clk,
+                .pclk_mask = AUX_CLK_PLL3_MASK,
+                .scalable = 0,
+        },
+};
+/* uart parent select structure */
+static struct pclk_sel uart_pclk_sel = {
+        .pclk_info = uart_pclk_info,
+        .pclk_count = ARRAY_SIZE(uart_pclk_info),
+        .pclk_sel_reg = PERIP_CLK_CFG,
+        .pclk_sel_mask = UART_CLK_MASK,
+};
+/* uart clock */
+static struct clk uart_clk = {
+        .en_reg = PERIP1_CLK_ENB,
+        .en_reg_bit = UART_CLK_ENB,
+        .pclk_sel = &uart_pclk_sel,
+        .pclk_sel_shift = UART_CLK_SHIFT,
+        .recalc = &aux_clk_recalc,
+        .private_data = &uart_config,
+};
+/* firda configurations */
+static struct aux_clk_config firda_config = {
+        .synth_reg = FIRDA_CLK_SYNT,
+};
+/* firda parents */
+static struct pclk_info firda_pclk_info[] = {
+        {
+                .pclk = &pll1_clk,
+                .pclk_mask = AUX_CLK_PLL1_MASK,
+                .scalable = 1,
+        }, {
+                .pclk = &pll3_48m_clk,
+                .pclk_mask = AUX_CLK_PLL3_MASK,
+                .scalable = 0,
+        },
+};
+/* firda parent select structure */
+static struct pclk_sel firda_pclk_sel = {
+        .pclk_info = firda_pclk_info,
+        .pclk_count = ARRAY_SIZE(firda_pclk_info),
+        .pclk_sel_reg = PERIP_CLK_CFG,
+        .pclk_sel_mask = FIRDA_CLK_MASK,
+};
+/* firda clock */
+static struct clk firda_clk = {
+        .en_reg = PERIP1_CLK_ENB,
+        .en_reg_bit = FIRDA_CLK_ENB,
+        .pclk_sel = &firda_pclk_sel,
+        .pclk_sel_shift = FIRDA_CLK_SHIFT,
+        .recalc = &aux_clk_recalc,
+        .private_data = &firda_config,
+};
+/* gpt parents */
+static struct pclk_info gpt_pclk_info[] = {
+        {
+                .pclk = &pll1_clk,
+                .pclk_mask = AUX_CLK_PLL1_MASK,
+                .scalable = 1,
+        }, {
+                .pclk = &pll3_48m_clk,
+                .pclk_mask = AUX_CLK_PLL3_MASK,
+                .scalable = 0,
+        },
+};
+/* gpt parent select structure */
+static struct pclk_sel gpt_pclk_sel = {
+        .pclk_info = gpt_pclk_info,
+        .pclk_count = ARRAY_SIZE(gpt_pclk_info),
+        .pclk_sel_reg = PERIP_CLK_CFG,
+        .pclk_sel_mask = GPT_CLK_MASK,
+};
+/* gpt0 configurations */
+static struct aux_clk_config gpt0_config = {
+        .synth_reg = PRSC1_CLK_CFG,
+};
+/* gpt0 timer clock */
+static struct clk gpt0_clk = {
+        .flags = ALWAYS_ENABLED,
+        .pclk_sel = &gpt_pclk_sel,
+        .pclk_sel_shift = GPT0_CLK_SHIFT,
+        .recalc = &gpt_clk_recalc,
+        .private_data = &gpt0_config,
+};
+/* gpt1 configurations */
+static struct aux_clk_config gpt1_config = {
+        .synth_reg = PRSC2_CLK_CFG,
+};
+/* gpt1 timer clock */
+static struct clk gpt1_clk = {
+        .en_reg = PERIP1_CLK_ENB,
+        .en_reg_bit = GPT1_CLK_ENB,
+        .pclk_sel = &gpt_pclk_sel,
+        .pclk_sel_shift = GPT1_CLK_SHIFT,
+        .recalc = &gpt_clk_recalc,
+        .private_data = &gpt1_config,
+};
+/* gpt2 configurations */
+static struct aux_clk_config gpt2_config = {
+        .synth_reg = PRSC3_CLK_CFG,
+};
+/* gpt2 timer clock */
+static struct clk gpt2_clk = {
+        .en_reg = PERIP1_CLK_ENB,
+        .en_reg_bit = GPT2_CLK_ENB,
+        .pclk_sel = &gpt_pclk_sel,
+        .pclk_sel_shift = GPT2_CLK_SHIFT,
+        .recalc = &gpt_clk_recalc,
+        .private_data = &gpt2_config,
+};
+/* clock derived from pll3 clk */
+/* usbh clock */
+static struct clk usbh_clk = {
+        .pclk = &pll3_48m_clk,
+        .en_reg = PERIP1_CLK_ENB,
+        .en_reg_bit = USBH_CLK_ENB,
+        .recalc = &follow_parent,
+};
+/* usbd clock */
+static struct clk usbd_clk = {
+        .pclk = &pll3_48m_clk,
+        .en_reg = PERIP1_CLK_ENB,
+        .en_reg_bit = USBD_CLK_ENB,
+        .recalc = &follow_parent,
+};
+/* clcd clock */
+static struct clk clcd_clk = {
+        .flags = ALWAYS_ENABLED,
+        .pclk = &pll3_48m_clk,
+        .recalc = &follow_parent,
+};
+/* clock derived from ahb clk */
+/* apb configuration structure */
+static struct bus_clk_config apb_config = {
+        .reg = CORE_CLK_CFG,
+        .mask = HCLK_PCLK_RATIO_MASK,
+        .shift = HCLK_PCLK_RATIO_SHIFT,
+};
+/* apb clock */
+static struct clk apb_clk = {
+        .flags = ALWAYS_ENABLED,
+        .pclk = &ahb_clk,
+        .recalc = &bus_clk_recalc,
+        .private_data = &apb_config,
+};
+/* i2c clock */
+static struct clk i2c_clk = {
+        .pclk = &ahb_clk,
+        .en_reg = PERIP1_CLK_ENB,
+        .en_reg_bit = I2C_CLK_ENB,
+        .recalc = &follow_parent,
+};
+/* dma clock */
+static struct clk dma_clk = {
+        .pclk = &ahb_clk,
+        .en_reg = PERIP1_CLK_ENB,
+        .en_reg_bit = DMA_CLK_ENB,
+        .recalc = &follow_parent,
+};
+/* jpeg clock */
+static struct clk jpeg_clk = {
+        .pclk = &ahb_clk,
+        .en_reg = PERIP1_CLK_ENB,
+        .en_reg_bit = JPEG_CLK_ENB,
+        .recalc = &follow_parent,
+};
+/* gmac clock */
+static struct clk gmac_clk = {
+        .pclk = &ahb_clk,
+        .en_reg = PERIP1_CLK_ENB,
+        .en_reg_bit = GMAC_CLK_ENB,
+        .recalc = &follow_parent,
+};
+/* smi clock */
+static struct clk smi_clk = {
+        .pclk = &ahb_clk,
+        .en_reg = PERIP1_CLK_ENB,
+        .en_reg_bit = SMI_CLK_ENB,
+        .recalc = &follow_parent,
+};
+/* c3 clock */
+static struct clk c3_clk = {
+        .pclk = &ahb_clk,
+        .en_reg = PERIP1_CLK_ENB,
+        .en_reg_bit = C3_CLK_ENB,
+        .recalc = &follow_parent,
+};
+/* clock derived from apb clk */
+/* adc clock */
+static struct clk adc_clk = {
+        .pclk = &apb_clk,
+        .en_reg = PERIP1_CLK_ENB,
+        .en_reg_bit = ADC_CLK_ENB,
+        .recalc = &follow_parent,
+};
+/* ssp clock */
+static struct clk ssp_clk = {
+        .pclk = &apb_clk,
+        .en_reg = PERIP1_CLK_ENB,
+        .en_reg_bit = SSP_CLK_ENB,
+        .recalc = &follow_parent,
+};
+/* gpio clock */
+static struct clk gpio_clk = {
+        .pclk = &apb_clk,
+        .en_reg = PERIP1_CLK_ENB,
+        .en_reg_bit = GPIO_CLK_ENB,
+        .recalc = &follow_parent,
+};
+/* array of all spear 3xx clock lookups */
+static struct clk_lookup spear_clk_lookups[] = {
+        /* root clks */
+        { .con_id = "osc_32k_clk",      .clk = &osc_32k_clk},
+        { .con_id = "osc_24m_clk",      .clk = &osc_24m_clk},
+        /* clock derived from 32 KHz osc clk */
+        { .dev_id = "rtc",              .clk = &rtc_clk},
+        /* clock derived from 24 MHz osc clk */
+        { .con_id = "pll1_clk",         .clk = &pll1_clk},
+        { .con_id = "pll3_48m_clk",     .clk = &pll3_48m_clk},
+        { .dev_id = "wdt",              .clk = &wdt_clk},
+        /* clock derived from pll1 clk */
+        { .con_id = "cpu_clk",          .clk = &cpu_clk},
+        { .con_id = "ahb_clk",          .clk = &ahb_clk},
+        { .dev_id = "uart",             .clk = &uart_clk},
+        { .dev_id = "firda",            .clk = &firda_clk},
+        { .dev_id = "gpt0",             .clk = &gpt0_clk},
+        { .dev_id = "gpt1",             .clk = &gpt1_clk},
+        { .dev_id = "gpt2",             .clk = &gpt2_clk},
+        /* clock derived from pll3 clk */
+        { .dev_id = "usbh",             .clk = &usbh_clk},
+        { .dev_id = "usbd",             .clk = &usbd_clk},
+        { .dev_id = "clcd",             .clk = &clcd_clk},
+        /* clock derived from ahb clk */
+        { .con_id = "apb_clk",          .clk = &apb_clk},
+        { .dev_id = "i2c",              .clk = &i2c_clk},
+        { .dev_id = "dma",              .clk = &dma_clk},
+        { .dev_id = "jpeg",             .clk = &jpeg_clk},
+        { .dev_id = "gmac",             .clk = &gmac_clk},
+        { .dev_id = "smi",              .clk = &smi_clk},
+        { .dev_id = "c3",               .clk = &c3_clk},
+        /* clock derived from apb clk */
+        { .dev_id = "adc",              .clk = &adc_clk},
+        { .dev_id = "ssp",              .clk = &ssp_clk},
+        { .dev_id = "gpio",             .clk = &gpio_clk},
+};
+void __init clk_init(void)
+{
+        int i;
+        for (i = 0; i < ARRAY_SIZE(spear_clk_lookups); i++)
+                clk_register(&spear_clk_lookups[i]);
+        recalc_root_clocks();
+}
diff --git a/arch/arm/mach-spear3xx/include/mach/clkdev.h b/arch/arm/mach-spear3xx/include/mach/clkdev.h
new file mode 100644
index 000000000000..a3d07339d9f1
--- /dev/null
+++ b/arch/arm/mach-spear3xx/include/mach/clkdev.h
@@ -0,0 +1,19 @@
+/*
+ * arch/arm/mach-spear3xx/include/mach/clkdev.h
+ *
+ * Clock Dev framework definitions for SPEAr3xx machine family
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#ifndef __MACH_CLKDEV_H
+#define __MACH_CLKDEV_H
+#include <plat/clkdev.h>
+#endif /* __MACH_CLKDEV_H */
diff --git a/arch/arm/mach-spear3xx/include/mach/debug-macro.S b/arch/arm/mach-spear3xx/include/mach/debug-macro.S
new file mode 100644
index 000000000000..590519f10d6e
--- /dev/null
+++ b/arch/arm/mach-spear3xx/include/mach/debug-macro.S
@@ -0,0 +1,14 @@
+/*
+ * arch/arm/mach-spear3xx/include/mach/debug-macro.S
+ *
+ * Debugging macro include header spear3xx machine family
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <plat/debug-macro.S>
diff --git a/arch/arm/mach-spear3xx/include/mach/entry-macro.S b/arch/arm/mach-spear3xx/include/mach/entry-macro.S
new file mode 100644
index 000000000000..947625d6b48d
--- /dev/null
+++ b/arch/arm/mach-spear3xx/include/mach/entry-macro.S
@@ -0,0 +1,46 @@
+/*
+ * arch/arm/mach-spear3xx/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for SPEAr3xx machine family
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <mach/hardware.h>
+#include <mach/spear.h>
+#include <asm/hardware/vic.h>
+                .macro  disable_fiq
+                .endm
+                .macro  get_irqnr_preamble, base, tmp
+                .endm
+                .macro  arch_ret_to_user, tmp1, tmp2
+                .endm
+                .macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
+                ldr     \base, =VA_SPEAR3XX_ML1_VIC_BASE
+                ldr     \irqstat, [\base, #VIC_IRQ_STATUS]      @ get status
+                teq     \irqstat, #0
+                beq     1001f                           @ this will set/reset
+                                                        @ zero register
+                /*
+                 * Following code will find bit position of least significang
+                 * bit set in irqstat, using following equation
+                 * least significant bit set in n = (n & ~(n-1))
+                 */
+                sub     \tmp, \irqstat, #1              @ tmp = irqstat - 1
+                mvn     \tmp, \tmp                      @ tmp = ~tmp
+                and     \irqstat, \irqstat, \tmp        @ irqstat &= tmp
+                /* Now, irqstat is = bit no. of 1st bit set in vic irq status */
+                clz     \tmp, \irqstat                  @ tmp = leading zeros
+                rsb     \irqnr, \tmp, #0x1F             @ irqnr = 32 - tmp - 1
+1001:           /* EQ will be set if no irqs pending */
+                .endm
diff --git a/arch/arm/mach-spear3xx/include/mach/generic.h b/arch/arm/mach-spear3xx/include/mach/generic.h
new file mode 100644
index 000000000000..af7e02c909a3
--- /dev/null
+++ b/arch/arm/mach-spear3xx/include/mach/generic.h
@@ -0,0 +1,205 @@
+/*
+ * arch/arm/mach-spear3xx/generic.h
+ *
+ * SPEAr3XX machine family generic header file
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#ifndef __MACH_GENERIC_H
+#define __MACH_GENERIC_H
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/amba/bus.h>
+#include <plat/padmux.h>
+/* spear3xx declarations */
+/*
+ * Each GPT has 2 timer channels
+ * Following GPT channels will be used as clock source and clockevent
+ */
+#define SPEAR_GPT0_BASE         SPEAR3XX_ML1_TMR_BASE
+#define SPEAR_GPT0_CHAN0_IRQ    IRQ_CPU_GPT1_1
+#define SPEAR_GPT0_CHAN1_IRQ    IRQ_CPU_GPT1_2
+/* Add spear3xx family device structure declarations here */
+extern struct amba_device gpio_device;
+extern struct amba_device uart_device;
+extern struct sys_timer spear_sys_timer;
+/* Add spear3xx family function declarations here */
+void __init clk_init(void);
+void __init spear3xx_map_io(void);
+void __init spear3xx_init_irq(void);
+void __init spear3xx_init(void);
+void spear_pmx_init(struct pmx_driver *pmx_driver, uint base, uint size);
+/* pad mux declarations */
+#define PMX_FIRDA_MASK          (1 << 14)
+#define PMX_I2C_MASK            (1 << 13)
+#define PMX_SSP_CS_MASK         (1 << 12)
+#define PMX_SSP_MASK            (1 << 11)
+#define PMX_MII_MASK            (1 << 10)
+#define PMX_GPIO_PIN0_MASK      (1 << 9)
+#define PMX_GPIO_PIN1_MASK      (1 << 8)
+#define PMX_GPIO_PIN2_MASK      (1 << 7)
+#define PMX_GPIO_PIN3_MASK      (1 << 6)
+#define PMX_GPIO_PIN4_MASK      (1 << 5)
+#define PMX_GPIO_PIN5_MASK      (1 << 4)
+#define PMX_UART0_MODEM_MASK    (1 << 3)
+#define PMX_UART0_MASK          (1 << 2)
+#define PMX_TIMER_3_4_MASK      (1 << 1)
+#define PMX_TIMER_1_2_MASK      (1 << 0)
+/* pad mux devices */
+extern struct pmx_dev pmx_firda;
+extern struct pmx_dev pmx_i2c;
+extern struct pmx_dev pmx_ssp_cs;
+extern struct pmx_dev pmx_ssp;
+extern struct pmx_dev pmx_mii;
+extern struct pmx_dev pmx_gpio_pin0;
+extern struct pmx_dev pmx_gpio_pin1;
+extern struct pmx_dev pmx_gpio_pin2;
+extern struct pmx_dev pmx_gpio_pin3;
+extern struct pmx_dev pmx_gpio_pin4;
+extern struct pmx_dev pmx_gpio_pin5;
+extern struct pmx_dev pmx_uart0_modem;
+extern struct pmx_dev pmx_uart0;
+extern struct pmx_dev pmx_timer_3_4;
+extern struct pmx_dev pmx_timer_1_2;
+#if defined(CONFIG_MACH_SPEAR310) || defined(CONFIG_MACH_SPEAR320)
+/* padmux plgpio devices */
+extern struct pmx_dev pmx_plgpio_0_1;
+extern struct pmx_dev pmx_plgpio_2_3;
+extern struct pmx_dev pmx_plgpio_4_5;
+extern struct pmx_dev pmx_plgpio_6_9;
+extern struct pmx_dev pmx_plgpio_10_27;
+extern struct pmx_dev pmx_plgpio_28;
+extern struct pmx_dev pmx_plgpio_29;
+extern struct pmx_dev pmx_plgpio_30;
+extern struct pmx_dev pmx_plgpio_31;
+extern struct pmx_dev pmx_plgpio_32;
+extern struct pmx_dev pmx_plgpio_33;
+extern struct pmx_dev pmx_plgpio_34_36;
+extern struct pmx_dev pmx_plgpio_37_42;
+extern struct pmx_dev pmx_plgpio_43_44_47_48;
+extern struct pmx_dev pmx_plgpio_45_46_49_50;
+#endif
+extern struct pmx_driver pmx_driver;
+/* spear300 declarations */
+#ifdef CONFIG_MACH_SPEAR300
+/* Add spear300 machine device structure declarations here */
+extern struct amba_device gpio1_device;
+/* pad mux modes */
+extern struct pmx_mode nand_mode;
+extern struct pmx_mode nor_mode;
+extern struct pmx_mode photo_frame_mode;
+extern struct pmx_mode lend_ip_phone_mode;
+extern struct pmx_mode hend_ip_phone_mode;
+extern struct pmx_mode lend_wifi_phone_mode;
+extern struct pmx_mode hend_wifi_phone_mode;
+extern struct pmx_mode ata_pabx_wi2s_mode;
+extern struct pmx_mode ata_pabx_i2s_mode;
+extern struct pmx_mode caml_lcdw_mode;
+extern struct pmx_mode camu_lcd_mode;
+extern struct pmx_mode camu_wlcd_mode;
+extern struct pmx_mode caml_lcd_mode;
+/* pad mux devices */
+extern struct pmx_dev pmx_fsmc_2_chips;
+extern struct pmx_dev pmx_fsmc_4_chips;
+extern struct pmx_dev pmx_keyboard;
+extern struct pmx_dev pmx_clcd;
+extern struct pmx_dev pmx_telecom_gpio;
+extern struct pmx_dev pmx_telecom_tdm;
+extern struct pmx_dev pmx_telecom_spi_cs_i2c_clk;
+extern struct pmx_dev pmx_telecom_camera;
+extern struct pmx_dev pmx_telecom_dac;
+extern struct pmx_dev pmx_telecom_i2s;
+extern struct pmx_dev pmx_telecom_boot_pins;
+extern struct pmx_dev pmx_telecom_sdio_4bit;
+extern struct pmx_dev pmx_telecom_sdio_8bit;
+extern struct pmx_dev pmx_gpio1;
+void spear300_pmx_init(void);
+/* Add spear300 machine function declarations here */
+void __init spear300_init(void);
+#endif /* CONFIG_MACH_SPEAR300 */
+/* spear310 declarations */
+#ifdef CONFIG_MACH_SPEAR310
+/* Add spear310 machine device structure declarations here */
+/* pad mux devices */
+extern struct pmx_dev pmx_emi_cs_0_1_4_5;
+extern struct pmx_dev pmx_emi_cs_2_3;
+extern struct pmx_dev pmx_uart1;
+extern struct pmx_dev pmx_uart2;
+extern struct pmx_dev pmx_uart3_4_5;
+extern struct pmx_dev pmx_fsmc;
+extern struct pmx_dev pmx_rs485_0_1;
+extern struct pmx_dev pmx_tdm0;
+void spear310_pmx_init(void);
+/* Add spear310 machine function declarations here */
+void __init spear310_init(void);
+#endif /* CONFIG_MACH_SPEAR310 */
+/* spear320 declarations */
+#ifdef CONFIG_MACH_SPEAR320
+/* Add spear320 machine device structure declarations here */
+/* pad mux modes */
+extern struct pmx_mode auto_net_smii_mode;
+extern struct pmx_mode auto_net_mii_mode;
+extern struct pmx_mode auto_exp_mode;
+extern struct pmx_mode small_printers_mode;
+/* pad mux devices */
+extern struct pmx_dev pmx_clcd;
+extern struct pmx_dev pmx_emi;
+extern struct pmx_dev pmx_fsmc;
+extern struct pmx_dev pmx_spp;
+extern struct pmx_dev pmx_sdio;
+extern struct pmx_dev pmx_i2s;
+extern struct pmx_dev pmx_uart1;
+extern struct pmx_dev pmx_uart1_modem;
+extern struct pmx_dev pmx_uart2;
+extern struct pmx_dev pmx_touchscreen;
+extern struct pmx_dev pmx_can;
+extern struct pmx_dev pmx_sdio_led;
+extern struct pmx_dev pmx_pwm0;
+extern struct pmx_dev pmx_pwm1;
+extern struct pmx_dev pmx_pwm2;
+extern struct pmx_dev pmx_pwm3;
+extern struct pmx_dev pmx_ssp1;
+extern struct pmx_dev pmx_ssp2;
+extern struct pmx_dev pmx_mii1;
+extern struct pmx_dev pmx_smii0;
+extern struct pmx_dev pmx_smii1;
+extern struct pmx_dev pmx_i2c1;
+void spear320_pmx_init(void);
+/* Add spear320 machine function declarations here */
+void __init spear320_init(void);
+#endif /* CONFIG_MACH_SPEAR320 */
+#endif /* __MACH_GENERIC_H */
diff --git a/arch/arm/mach-spear3xx/include/mach/gpio.h b/arch/arm/mach-spear3xx/include/mach/gpio.h
new file mode 100644
index 000000000000..451b2081bfc9
--- /dev/null
+++ b/arch/arm/mach-spear3xx/include/mach/gpio.h
@@ -0,0 +1,19 @@
+/*
+ * arch/arm/mach-spear3xx/include/mach/gpio.h
+ *
+ * GPIO macros for SPEAr3xx machine family
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#ifndef __MACH_GPIO_H
+#define __MACH_GPIO_H
+#include <plat/gpio.h>
+#endif /* __MACH_GPIO_H */
diff --git a/arch/arm/mach-spear3xx/include/mach/hardware.h b/arch/arm/mach-spear3xx/include/mach/hardware.h
new file mode 100644
index 000000000000..4a86e6a3c444
--- /dev/null
+++ b/arch/arm/mach-spear3xx/include/mach/hardware.h
@@ -0,0 +1,20 @@
+/*
+ * arch/arm/mach-spear3xx/include/mach/hardware.h
+ *
+ * Hardware definitions for SPEAr3xx machine family
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#ifndef __MACH_HARDWARE_H
+#define __MACH_HARDWARE_H
+/* Vitual to physical translation of statically mapped space */
+#define IO_ADDRESS(x)           (x | 0xF0000000)
+#endif /* __MACH_HARDWARE_H */
diff --git a/arch/arm/mach-spear3xx/include/mach/io.h b/arch/arm/mach-spear3xx/include/mach/io.h
new file mode 100644
index 000000000000..30cff8a1f6b5
--- /dev/null
+++ b/arch/arm/mach-spear3xx/include/mach/io.h
@@ -0,0 +1,19 @@
+/*
+ * arch/arm/mach-spear3xx/include/mach/io.h
+ *
+ * IO definitions for SPEAr3xx machine family
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#ifndef __MACH_IO_H
+#define __MACH_IO_H
+#include <plat/io.h>
+#endif /* __MACH_IO_H */
diff --git a/arch/arm/mach-spear3xx/include/mach/irqs.h b/arch/arm/mach-spear3xx/include/mach/irqs.h
new file mode 100644
index 000000000000..7f940b818473
--- /dev/null
+++ b/arch/arm/mach-spear3xx/include/mach/irqs.h
@@ -0,0 +1,152 @@
+/*
+ * arch/arm/mach-spear3xx/include/mach/irqs.h
+ *
+ * IRQ helper macros for SPEAr3xx machine family
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#ifndef __MACH_IRQS_H
+#define __MACH_IRQS_H
+/* SPEAr3xx IRQ definitions */
+#define IRQ_HW_ACCEL_MOD_0                      0
+#define IRQ_INTRCOMM_RAS_ARM                    1
+#define IRQ_CPU_GPT1_1                          2
+#define IRQ_CPU_GPT1_2                          3
+#define IRQ_BASIC_GPT1_1                        4
+#define IRQ_BASIC_GPT1_2                        5
+#define IRQ_BASIC_GPT2_1                        6
+#define IRQ_BASIC_GPT2_2                        7
+#define IRQ_BASIC_DMA                           8
+#define IRQ_BASIC_SMI                           9
+#define IRQ_BASIC_RTC                           10
+#define IRQ_BASIC_GPIO                          11
+#define IRQ_BASIC_WDT                           12
+#define IRQ_DDR_CONTROLLER                      13
+#define IRQ_SYS_ERROR                           14
+#define IRQ_WAKEUP_RCV                          15
+#define IRQ_JPEG                                16
+#define IRQ_IRDA                                17
+#define IRQ_ADC                                 18
+#define IRQ_UART                                19
+#define IRQ_SSP                                 20
+#define IRQ_I2C                                 21
+#define IRQ_MAC_1                               22
+#define IRQ_MAC_2                               23
+#define IRQ_USB_DEV                             24
+#define IRQ_USB_H_OHCI_0                        25
+#define IRQ_USB_H_EHCI_0                        26
+#define IRQ_USB_H_EHCI_1                        IRQ_USB_H_EHCI_0
+#define IRQ_USB_H_OHCI_1                        27
+#define IRQ_GEN_RAS_1                           28
+#define IRQ_GEN_RAS_2                           29
+#define IRQ_GEN_RAS_3                           30
+#define IRQ_HW_ACCEL_MOD_1                      31
+#define IRQ_VIC_END                             32
+#define VIRQ_START                              IRQ_VIC_END
+/* SPEAr300 Virtual irq definitions */
+#ifdef CONFIG_MACH_SPEAR300
+/* IRQs sharing IRQ_GEN_RAS_1 */
+#define VIRQ_IT_PERS_S                          (VIRQ_START + 0)
+#define VIRQ_IT_CHANGE_S                        (VIRQ_START + 1)
+#define VIRQ_I2S                                (VIRQ_START + 2)
+#define VIRQ_TDM                                (VIRQ_START + 3)
+#define VIRQ_CAMERA_L                           (VIRQ_START + 4)
+#define VIRQ_CAMERA_F                           (VIRQ_START + 5)
+#define VIRQ_CAMERA_V                           (VIRQ_START + 6)
+#define VIRQ_KEYBOARD                           (VIRQ_START + 7)
+#define VIRQ_GPIO1                              (VIRQ_START + 8)
+/* IRQs sharing IRQ_GEN_RAS_3 */
+#define IRQ_CLCD                                IRQ_GEN_RAS_3
+/* IRQs sharing IRQ_INTRCOMM_RAS_ARM */
+#define IRQ_SDIO                                IRQ_INTRCOMM_RAS_ARM
+/* GPIO pins virtual irqs */
+#define SPEAR_GPIO_INT_BASE                     (VIRQ_START + 9)
+#define SPEAR_GPIO1_INT_BASE                    (SPEAR_GPIO_INT_BASE + 8)
+#define SPEAR_GPIO_INT_END                      (SPEAR_GPIO1_INT_BASE + 8)
+/* SPEAr310 Virtual irq definitions */
+#elif defined(CONFIG_MACH_SPEAR310)
+/* IRQs sharing IRQ_GEN_RAS_1 */
+#define VIRQ_SMII0                              (VIRQ_START + 0)
+#define VIRQ_SMII1                              (VIRQ_START + 1)
+#define VIRQ_SMII2                              (VIRQ_START + 2)
+#define VIRQ_SMII3                              (VIRQ_START + 3)
+#define VIRQ_WAKEUP_SMII0                       (VIRQ_START + 4)
+#define VIRQ_WAKEUP_SMII1                       (VIRQ_START + 5)
+#define VIRQ_WAKEUP_SMII2                       (VIRQ_START + 6)
+#define VIRQ_WAKEUP_SMII3                       (VIRQ_START + 7)
+/* IRQs sharing IRQ_GEN_RAS_2 */
+#define VIRQ_UART1                              (VIRQ_START + 8)
+#define VIRQ_UART2                              (VIRQ_START + 9)
+#define VIRQ_UART3                              (VIRQ_START + 10)
+#define VIRQ_UART4                              (VIRQ_START + 11)
+#define VIRQ_UART5                              (VIRQ_START + 12)
+/* IRQs sharing IRQ_GEN_RAS_3 */
+#define VIRQ_EMI                                (VIRQ_START + 13)
+#define VIRQ_PLGPIO                             (VIRQ_START + 14)
+/* IRQs sharing IRQ_INTRCOMM_RAS_ARM */
+#define VIRQ_TDM_HDLC                           (VIRQ_START + 15)
+#define VIRQ_RS485_0                            (VIRQ_START + 16)
+#define VIRQ_RS485_1                            (VIRQ_START + 17)
+/* GPIO pins virtual irqs */
+#define SPEAR_GPIO_INT_BASE                     (VIRQ_START + 18)
+/* SPEAr320 Virtual irq definitions */
+#else
+/* IRQs sharing IRQ_GEN_RAS_1 */
+#define VIRQ_EMI                                (VIRQ_START + 0)
+#define VIRQ_CLCD                               (VIRQ_START + 1)
+#define VIRQ_SPP                                (VIRQ_START + 2)
+/* IRQs sharing IRQ_GEN_RAS_2 */
+#define IRQ_SDIO                                IRQ_GEN_RAS_2
+/* IRQs sharing IRQ_GEN_RAS_3 */
+#define VIRQ_PLGPIO                             (VIRQ_START + 3)
+#define VIRQ_I2S_PLAY                           (VIRQ_START + 4)
+#define VIRQ_I2S_REC                            (VIRQ_START + 5)
+/* IRQs sharing IRQ_INTRCOMM_RAS_ARM */
+#define VIRQ_CANU                               (VIRQ_START + 6)
+#define VIRQ_CANL                               (VIRQ_START + 7)
+#define VIRQ_UART1                              (VIRQ_START + 8)
+#define VIRQ_UART2                              (VIRQ_START + 9)
+#define VIRQ_SSP1                               (VIRQ_START + 10)
+#define VIRQ_SSP2                               (VIRQ_START + 11)
+#define VIRQ_SMII0                              (VIRQ_START + 12)
+#define VIRQ_MII1_SMII1                         (VIRQ_START + 13)
+#define VIRQ_WAKEUP_SMII0                       (VIRQ_START + 14)
+#define VIRQ_WAKEUP_MII1_SMII1                  (VIRQ_START + 15)
+#define VIRQ_I2C                                (VIRQ_START + 16)
+/* GPIO pins virtual irqs */
+#define SPEAR_GPIO_INT_BASE                     (VIRQ_START + 17)
+#endif
+/* PLGPIO Virtual IRQs */
+#if defined(CONFIG_MACH_SPEAR310) || defined(CONFIG_MACH_SPEAR320)
+#define SPEAR_PLGPIO_INT_BASE                   (SPEAR_GPIO_INT_BASE + 8)
+#define SPEAR_GPIO_INT_END                      (SPEAR_PLGPIO_INT_BASE + 102)
+#endif
+#define VIRQ_END                                SPEAR_GPIO_INT_END
+#define NR_IRQS                                 VIRQ_END
+#endif /* __MACH_IRQS_H */
diff --git a/arch/arm/mach-spear3xx/include/mach/memory.h b/arch/arm/mach-spear3xx/include/mach/memory.h
new file mode 100644
index 000000000000..51735221ea19
--- /dev/null
+++ b/arch/arm/mach-spear3xx/include/mach/memory.h
@@ -0,0 +1,19 @@
+/*
+ * arch/arm/mach-spear3xx/include/mach/memory.h
+ *
+ * Memory map for SPEAr3xx machine family
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#ifndef __MACH_MEMORY_H
+#define __MACH_MEMORY_H
+#include <plat/memory.h>
+#endif /* __MACH_MEMORY_H */
diff --git a/arch/arm/mach-spear3xx/include/mach/misc_regs.h b/arch/arm/mach-spear3xx/include/mach/misc_regs.h
new file mode 100644
index 000000000000..38d767a1aba0
--- /dev/null
+++ b/arch/arm/mach-spear3xx/include/mach/misc_regs.h
@@ -0,0 +1,163 @@
+/*
+ * arch/arm/mach-spear3xx/include/mach/misc_regs.h
+ *
+ * Miscellaneous registers definitions for SPEAr3xx machine family
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#ifndef __MACH_MISC_REGS_H
+#define __MACH_MISC_REGS_H
+#include <mach/spear.h>
+#define MISC_BASE               VA_SPEAR3XX_ICM3_MISC_REG_BASE
+#define SOC_CFG_CTR             ((unsigned int *)(MISC_BASE + 0x000))
+#define DIAG_CFG_CTR            ((unsigned int *)(MISC_BASE + 0x004))
+#define PLL1_CTR                ((unsigned int *)(MISC_BASE + 0x008))
+#define PLL1_FRQ                ((unsigned int *)(MISC_BASE + 0x00C))
+#define PLL1_MOD                ((unsigned int *)(MISC_BASE + 0x010))
+#define PLL2_CTR                ((unsigned int *)(MISC_BASE + 0x014))
+/* PLL_CTR register masks */
+#define PLL_ENABLE              2
+#define PLL_MODE_SHIFT          4
+#define PLL_MODE_MASK           0x3
+#define PLL_MODE_NORMAL         0
+#define PLL_MODE_FRACTION       1
+#define PLL_MODE_DITH_DSB       2
+#define PLL_MODE_DITH_SSB       3
+#define PLL2_FRQ                ((unsigned int *)(MISC_BASE + 0x018))
+/* PLL FRQ register masks */
+#define PLL_DIV_N_SHIFT         0
+#define PLL_DIV_N_MASK          0xFF
+#define PLL_DIV_P_SHIFT         8
+#define PLL_DIV_P_MASK          0x7
+#define PLL_NORM_FDBK_M_SHIFT   24
+#define PLL_NORM_FDBK_M_MASK    0xFF
+#define PLL_DITH_FDBK_M_SHIFT   16
+#define PLL_DITH_FDBK_M_MASK    0xFFFF
+#define PLL2_MOD                ((unsigned int *)(MISC_BASE + 0x01C))
+#define PLL_CLK_CFG             ((unsigned int *)(MISC_BASE + 0x020))
+#define CORE_CLK_CFG            ((unsigned int *)(MISC_BASE + 0x024))
+/* CORE CLK CFG register masks */
+#define PLL_HCLK_RATIO_SHIFT    10
+#define PLL_HCLK_RATIO_MASK     0x3
+#define HCLK_PCLK_RATIO_SHIFT   8
+#define HCLK_PCLK_RATIO_MASK    0x3
+#define PERIP_CLK_CFG           ((unsigned int *)(MISC_BASE + 0x028))
+/* PERIP_CLK_CFG register masks */
+#define UART_CLK_SHIFT          4
+#define UART_CLK_MASK           0x1
+#define FIRDA_CLK_SHIFT         5
+#define FIRDA_CLK_MASK          0x3
+#define GPT0_CLK_SHIFT          8
+#define GPT1_CLK_SHIFT          11
+#define GPT2_CLK_SHIFT          12
+#define GPT_CLK_MASK            0x1
+#define AUX_CLK_PLL3_MASK       0
+#define AUX_CLK_PLL1_MASK       1
+#define PERIP1_CLK_ENB          ((unsigned int *)(MISC_BASE + 0x02C))
+/* PERIP1_CLK_ENB register masks */
+#define UART_CLK_ENB            3
+#define SSP_CLK_ENB             5
+#define I2C_CLK_ENB             7
+#define JPEG_CLK_ENB            8
+#define FIRDA_CLK_ENB           10
+#define GPT1_CLK_ENB            11
+#define GPT2_CLK_ENB            12
+#define ADC_CLK_ENB             15
+#define RTC_CLK_ENB             17
+#define GPIO_CLK_ENB            18
+#define DMA_CLK_ENB             19
+#define SMI_CLK_ENB             21
+#define GMAC_CLK_ENB            23
+#define USBD_CLK_ENB            24
+#define USBH_CLK_ENB            25
+#define C3_CLK_ENB              31
+#define SOC_CORE_ID             ((unsigned int *)(MISC_BASE + 0x030))
+#define RAS_CLK_ENB             ((unsigned int *)(MISC_BASE + 0x034))
+#define PERIP1_SOF_RST          ((unsigned int *)(MISC_BASE + 0x038))
+/* PERIP1_SOF_RST register masks */
+#define JPEG_SOF_RST            8
+#define SOC_USER_ID             ((unsigned int *)(MISC_BASE + 0x03C))
+#define RAS_SOF_RST             ((unsigned int *)(MISC_BASE + 0x040))
+#define PRSC1_CLK_CFG           ((unsigned int *)(MISC_BASE + 0x044))
+#define PRSC2_CLK_CFG           ((unsigned int *)(MISC_BASE + 0x048))
+#define PRSC3_CLK_CFG           ((unsigned int *)(MISC_BASE + 0x04C))
+/* gpt synthesizer register masks */
+#define GPT_MSCALE_SHIFT        0
+#define GPT_MSCALE_MASK         0xFFF
+#define GPT_NSCALE_SHIFT        12
+#define GPT_NSCALE_MASK         0xF
+#define AMEM_CLK_CFG            ((unsigned int *)(MISC_BASE + 0x050))
+#define EXPI_CLK_CFG            ((unsigned int *)(MISC_BASE + 0x054))
+#define CLCD_CLK_SYNT           ((unsigned int *)(MISC_BASE + 0x05C))
+#define FIRDA_CLK_SYNT          ((unsigned int *)(MISC_BASE + 0x060))
+#define UART_CLK_SYNT           ((unsigned int *)(MISC_BASE + 0x064))
+#define GMAC_CLK_SYNT           ((unsigned int *)(MISC_BASE + 0x068))
+#define RAS1_CLK_SYNT           ((unsigned int *)(MISC_BASE + 0x06C))
+#define RAS2_CLK_SYNT           ((unsigned int *)(MISC_BASE + 0x070))
+#define RAS3_CLK_SYNT           ((unsigned int *)(MISC_BASE + 0x074))
+#define RAS4_CLK_SYNT           ((unsigned int *)(MISC_BASE + 0x078))
+/* aux clk synthesiser register masks for irda to ras4 */
+#define AUX_EQ_SEL_SHIFT        30
+#define AUX_EQ_SEL_MASK         1
+#define AUX_EQ1_SEL             0
+#define AUX_EQ2_SEL             1
+#define AUX_XSCALE_SHIFT        16
+#define AUX_XSCALE_MASK         0xFFF
+#define AUX_YSCALE_SHIFT        0
+#define AUX_YSCALE_MASK         0xFFF
+#define ICM1_ARB_CFG            ((unsigned int *)(MISC_BASE + 0x07C))
+#define ICM2_ARB_CFG            ((unsigned int *)(MISC_BASE + 0x080))
+#define ICM3_ARB_CFG            ((unsigned int *)(MISC_BASE + 0x084))
+#define ICM4_ARB_CFG            ((unsigned int *)(MISC_BASE + 0x088))
+#define ICM5_ARB_CFG            ((unsigned int *)(MISC_BASE + 0x08C))
+#define ICM6_ARB_CFG            ((unsigned int *)(MISC_BASE + 0x090))
+#define ICM7_ARB_CFG            ((unsigned int *)(MISC_BASE + 0x094))
+#define ICM8_ARB_CFG            ((unsigned int *)(MISC_BASE + 0x098))
+#define ICM9_ARB_CFG            ((unsigned int *)(MISC_BASE + 0x09C))
+#define DMA_CHN_CFG             ((unsigned int *)(MISC_BASE + 0x0A0))
+#define USB2_PHY_CFG            ((unsigned int *)(MISC_BASE + 0x0A4))
+#define GMAC_CFG_CTR            ((unsigned int *)(MISC_BASE + 0x0A8))
+#define EXPI_CFG_CTR            ((unsigned int *)(MISC_BASE + 0x0AC))
+#define PRC1_LOCK_CTR           ((unsigned int *)(MISC_BASE + 0x0C0))
+#define PRC2_LOCK_CTR           ((unsigned int *)(MISC_BASE + 0x0C4))
+#define PRC3_LOCK_CTR           ((unsigned int *)(MISC_BASE + 0x0C8))
+#define PRC4_LOCK_CTR           ((unsigned int *)(MISC_BASE + 0x0CC))
+#define PRC1_IRQ_CTR            ((unsigned int *)(MISC_BASE + 0x0D0))
+#define PRC2_IRQ_CTR            ((unsigned int *)(MISC_BASE + 0x0D4))
+#define PRC3_IRQ_CTR            ((unsigned int *)(MISC_BASE + 0x0D8))
+#define PRC4_IRQ_CTR            ((unsigned int *)(MISC_BASE + 0x0DC))
+#define PWRDOWN_CFG_CTR         ((unsigned int *)(MISC_BASE + 0x0E0))
+#define COMPSSTL_1V8_CFG        ((unsigned int *)(MISC_BASE + 0x0E4))
+#define COMPSSTL_2V5_CFG        ((unsigned int *)(MISC_BASE + 0x0E8))
+#define COMPCOR_3V3_CFG         ((unsigned int *)(MISC_BASE + 0x0EC))
+#define SSTLPAD_CFG_CTR         ((unsigned int *)(MISC_BASE + 0x0F0))
+#define BIST1_CFG_CTR           ((unsigned int *)(MISC_BASE + 0x0F4))
+#define BIST2_CFG_CTR           ((unsigned int *)(MISC_BASE + 0x0F8))
+#define BIST3_CFG_CTR           ((unsigned int *)(MISC_BASE + 0x0FC))
+#define BIST4_CFG_CTR           ((unsigned int *)(MISC_BASE + 0x100))
+#define BIST5_CFG_CTR           ((unsigned int *)(MISC_BASE + 0x104))
+#define BIST1_STS_RES           ((unsigned int *)(MISC_BASE + 0x108))
+#define BIST2_STS_RES           ((unsigned int *)(MISC_BASE + 0x10C))
+#define BIST3_STS_RES           ((unsigned int *)(MISC_BASE + 0x110))
+#define BIST4_STS_RES           ((unsigned int *)(MISC_BASE + 0x114))
+#define BIST5_STS_RES           ((unsigned int *)(MISC_BASE + 0x118))
+#define SYSERR_CFG_CTR          ((unsigned int *)(MISC_BASE + 0x11C))
+#endif /* __MACH_MISC_REGS_H */
diff --git a/arch/arm/mach-spear3xx/include/mach/spear.h b/arch/arm/mach-spear3xx/include/mach/spear.h
new file mode 100644
index 000000000000..dcca8568a486
--- /dev/null
+++ b/arch/arm/mach-spear3xx/include/mach/spear.h
@@ -0,0 +1,144 @@
+/*
+ * arch/arm/mach-spear3xx/include/mach/spear.h
+ *
+ * SPEAr3xx Machine family specific definition
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#ifndef __MACH_SPEAR3XX_H
+#define __MACH_SPEAR3XX_H
+#include <mach/hardware.h>
+#include <mach/spear300.h>
+#include <mach/spear310.h>
+#include <mach/spear320.h>
+#define SPEAR3XX_ML_SDRAM_BASE          0x00000000
+#define SPEAR3XX_ML_SDRAM_SIZE          0x40000000
+#define SPEAR3XX_ICM9_BASE              0xC0000000
+#define SPEAR3XX_ICM9_SIZE              0x10000000
+/* ICM1 - Low speed connection */
+#define SPEAR3XX_ICM1_2_BASE            0xD0000000
+#define SPEAR3XX_ICM1_2_SIZE            0x10000000
+#define SPEAR3XX_ICM1_UART_BASE         0xD0000000
+#define VA_SPEAR3XX_ICM1_UART_BASE      IO_ADDRESS(SPEAR3XX_ICM1_UART_BASE)
+#define SPEAR3XX_ICM1_UART_SIZE         0x00080000
+#define SPEAR3XX_ICM1_ADC_BASE          0xD0080000
+#define SPEAR3XX_ICM1_ADC_SIZE          0x00080000
+#define SPEAR3XX_ICM1_SSP_BASE          0xD0100000
+#define SPEAR3XX_ICM1_SSP_SIZE          0x00080000
+#define SPEAR3XX_ICM1_I2C_BASE          0xD0180000
+#define SPEAR3XX_ICM1_I2C_SIZE          0x00080000
+#define SPEAR3XX_ICM1_JPEG_BASE         0xD0800000
+#define SPEAR3XX_ICM1_JPEG_SIZE         0x00800000
+#define SPEAR3XX_ICM1_IRDA_BASE         0xD1000000
+#define SPEAR3XX_ICM1_IRDA_SIZE         0x00080000
+#define SPEAR3XX_ICM1_SRAM_BASE         0xD2800000
+#define SPEAR3XX_ICM1_SRAM_SIZE         0x05800000
+/* ICM2 - Application Subsystem */
+#define SPEAR3XX_ICM2_HWACCEL0_BASE     0xD8800000
+#define SPEAR3XX_ICM2_HWACCEL0_SIZE     0x00800000
+#define SPEAR3XX_ICM2_HWACCEL1_BASE     0xD9000000
+#define SPEAR3XX_ICM2_HWACCEL1_SIZE     0x00800000
+/* ICM4 - High Speed Connection */
+#define SPEAR3XX_ICM4_BASE              0xE0000000
+#define SPEAR3XX_ICM4_SIZE              0x08000000
+#define SPEAR3XX_ICM4_MII_BASE          0xE0800000
+#define SPEAR3XX_ICM4_MII_SIZE          0x00800000
+#define SPEAR3XX_ICM4_USBD_FIFO_BASE    0xE1000000
+#define SPEAR3XX_ICM4_USBD_FIFO_SIZE    0x00100000
+#define SPEAR3XX_ICM4_USBD_CSR_BASE     0xE1100000
+#define SPEAR3XX_ICM4_USBD_CSR_SIZE     0x00100000
+#define SPEAR3XX_ICM4_USBD_PLDT_BASE    0xE1200000
+#define SPEAR3XX_ICM4_USBD_PLDT_SIZE    0x00100000
+#define SPEAR3XX_ICM4_USB_EHCI0_1_BASE  0xE1800000
+#define SPEAR3XX_ICM4_USB_EHCI0_1_SIZE  0x00100000
+#define SPEAR3XX_ICM4_USB_OHCI0_BASE    0xE1900000
+#define SPEAR3XX_ICM4_USB_OHCI0_SIZE    0x00100000
+#define SPEAR3XX_ICM4_USB_OHCI1_BASE    0xE2100000
+#define SPEAR3XX_ICM4_USB_OHCI1_SIZE    0x00100000
+#define SPEAR3XX_ICM4_USB_ARB_BASE      0xE2800000
+#define SPEAR3XX_ICM4_USB_ARB_SIZE      0x00010000
+/* ML1 - Multi Layer CPU Subsystem */
+#define SPEAR3XX_ICM3_ML1_2_BASE        0xF0000000
+#define SPEAR3XX_ICM3_ML1_2_SIZE        0x0F000000
+#define SPEAR3XX_ML1_TMR_BASE           0xF0000000
+#define SPEAR3XX_ML1_TMR_SIZE           0x00100000
+#define SPEAR3XX_ML1_VIC_BASE           0xF1100000
+#define VA_SPEAR3XX_ML1_VIC_BASE        IO_ADDRESS(SPEAR3XX_ML1_VIC_BASE)
+#define SPEAR3XX_ML1_VIC_SIZE           0x00100000
+/* ICM3 - Basic Subsystem */
+#define SPEAR3XX_ICM3_SMEM_BASE         0xF8000000
+#define SPEAR3XX_ICM3_SMEM_SIZE         0x04000000
+#define SPEAR3XX_ICM3_SMI_CTRL_BASE     0xFC000000
+#define SPEAR3XX_ICM3_SMI_CTRL_SIZE     0x00200000
+#define SPEAR3XX_ICM3_DMA_BASE          0xFC400000
+#define SPEAR3XX_ICM3_DMA_SIZE          0x00200000
+#define SPEAR3XX_ICM3_SDRAM_CTRL_BASE   0xFC600000
+#define SPEAR3XX_ICM3_SDRAM_CTRL_SIZE   0x00200000
+#define SPEAR3XX_ICM3_TMR0_BASE         0xFC800000
+#define SPEAR3XX_ICM3_TMR0_SIZE         0x00080000
+#define SPEAR3XX_ICM3_WDT_BASE          0xFC880000
+#define SPEAR3XX_ICM3_WDT_SIZE          0x00080000
+#define SPEAR3XX_ICM3_RTC_BASE          0xFC900000
+#define SPEAR3XX_ICM3_RTC_SIZE          0x00080000
+#define SPEAR3XX_ICM3_GPIO_BASE         0xFC980000
+#define SPEAR3XX_ICM3_GPIO_SIZE         0x00080000
+#define SPEAR3XX_ICM3_SYS_CTRL_BASE     0xFCA00000
+#define VA_SPEAR3XX_ICM3_SYS_CTRL_BASE  IO_ADDRESS(SPEAR3XX_ICM3_SYS_CTRL_BASE)
+#define SPEAR3XX_ICM3_SYS_CTRL_SIZE     0x00080000
+#define SPEAR3XX_ICM3_MISC_REG_BASE     0xFCA80000
+#define VA_SPEAR3XX_ICM3_MISC_REG_BASE  IO_ADDRESS(SPEAR3XX_ICM3_MISC_REG_BASE)
+#define SPEAR3XX_ICM3_MISC_REG_SIZE     0x00080000
+#define SPEAR3XX_ICM3_TMR1_BASE         0xFCB00000
+#define SPEAR3XX_ICM3_TMR1_SIZE         0x00080000
+/* Debug uart for linux, will be used for debug and uncompress messages */
+#define SPEAR_DBG_UART_BASE             SPEAR3XX_ICM1_UART_BASE
+#define VA_SPEAR_DBG_UART_BASE          VA_SPEAR3XX_ICM1_UART_BASE
+/* Sysctl base for spear platform */
+#define SPEAR_SYS_CTRL_BASE             SPEAR3XX_ICM3_SYS_CTRL_BASE
+#define VA_SPEAR_SYS_CTRL_BASE          VA_SPEAR3XX_ICM3_SYS_CTRL_BASE
+#endif /* __MACH_SPEAR3XX_H */
diff --git a/arch/arm/mach-spear3xx/include/mach/spear300.h b/arch/arm/mach-spear3xx/include/mach/spear300.h
new file mode 100644
index 000000000000..ccaa76522ee2
--- /dev/null
+++ b/arch/arm/mach-spear3xx/include/mach/spear300.h
@@ -0,0 +1,83 @@
+/*
+ * arch/arm/mach-spear3xx/include/mach/spear300.h
+ *
+ * SPEAr300 Machine specific definition
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#ifdef  CONFIG_MACH_SPEAR300
+#ifndef __MACH_SPEAR300_H
+#define __MACH_SPEAR300_H
+/* Base address of various IPs */
+#define SPEAR300_TELECOM_BASE           0x50000000
+#define SPEAR300_TELECOM_SIZE           0x10000000
+/* Interrupt registers offsets and masks */
+#define SPEAR300_TELECOM_REG_SIZE       0x00010000
+#define INT_ENB_MASK_REG                0x54
+#define INT_STS_MASK_REG                0x58
+#define IT_PERS_S_IRQ_MASK              (1 << 0)
+#define IT_CHANGE_S_IRQ_MASK            (1 << 1)
+#define I2S_IRQ_MASK                    (1 << 2)
+#define TDM_IRQ_MASK                    (1 << 3)
+#define CAMERA_L_IRQ_MASK               (1 << 4)
+#define CAMERA_F_IRQ_MASK               (1 << 5)
+#define CAMERA_V_IRQ_MASK               (1 << 6)
+#define KEYBOARD_IRQ_MASK               (1 << 7)
+#define GPIO1_IRQ_MASK                  (1 << 8)
+#define SHIRQ_RAS1_MASK                 0x1FF
+#define SPEAR300_CLCD_BASE              0x60000000
+#define SPEAR300_CLCD_SIZE              0x10000000
+#define SPEAR300_SDIO_BASE              0x70000000
+#define SPEAR300_SDIO_SIZE              0x10000000
+#define SPEAR300_NAND_0_BASE            0x80000000
+#define SPEAR300_NAND_0_SIZE            0x04000000
+#define SPEAR300_NAND_1_BASE            0x84000000
+#define SPEAR300_NAND_1_SIZE            0x04000000
+#define SPEAR300_NAND_2_BASE            0x88000000
+#define SPEAR300_NAND_2_SIZE            0x04000000
+#define SPEAR300_NAND_3_BASE            0x8c000000
+#define SPEAR300_NAND_3_SIZE            0x04000000
+#define SPEAR300_NOR_0_BASE             0x90000000
+#define SPEAR300_NOR_0_SIZE             0x01000000
+#define SPEAR300_NOR_1_BASE             0x91000000
+#define SPEAR300_NOR_1_SIZE             0x01000000
+#define SPEAR300_NOR_2_BASE             0x92000000
+#define SPEAR300_NOR_2_SIZE             0x01000000
+#define SPEAR300_NOR_3_BASE             0x93000000
+#define SPEAR300_NOR_3_SIZE             0x01000000
+#define SPEAR300_FSMC_BASE              0x94000000
+#define SPEAR300_FSMC_SIZE              0x05000000
+#define SPEAR300_SOC_CONFIG_BASE        0x99000000
+#define SPEAR300_SOC_CONFIG_SIZE        0x00000008
+#define SPEAR300_KEYBOARD_BASE          0xA0000000
+#define SPEAR300_KEYBOARD_SIZE          0x09000000
+#define SPEAR300_GPIO_BASE              0xA9000000
+#define SPEAR300_GPIO_SIZE              0x07000000
+#endif /* __MACH_SPEAR300_H */
+#endif /* CONFIG_MACH_SPEAR300 */
diff --git a/arch/arm/mach-spear3xx/include/mach/spear310.h b/arch/arm/mach-spear3xx/include/mach/spear310.h
new file mode 100644
index 000000000000..b27bb8af3309
--- /dev/null
+++ b/arch/arm/mach-spear3xx/include/mach/spear310.h
@@ -0,0 +1,70 @@
+/*
+ * arch/arm/mach-spear3xx/include/mach/spear310.h
+ *
+ * SPEAr310 Machine specific definition
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#ifdef  CONFIG_MACH_SPEAR310
+#ifndef __MACH_SPEAR310_H
+#define __MACH_SPEAR310_H
+#define SPEAR310_NAND_BASE              0x40000000
+#define SPEAR310_NAND_SIZE              0x04000000
+#define SPEAR310_FSMC_BASE              0x44000000
+#define SPEAR310_FSMC_SIZE              0x01000000
+#define SPEAR310_UART1_BASE             0xB2000000
+#define SPEAR310_UART2_BASE             0xB2080000
+#define SPEAR310_UART3_BASE             0xB2100000
+#define SPEAR310_UART4_BASE             0xB2180000
+#define SPEAR310_UART5_BASE             0xB2200000
+#define SPEAR310_UART_SIZE              0x00080000
+#define SPEAR310_HDLC_BASE              0xB2800000
+#define SPEAR310_HDLC_SIZE              0x00800000
+#define SPEAR310_RS485_0_BASE           0xB3000000
+#define SPEAR310_RS485_0_SIZE           0x00800000
+#define SPEAR310_RS485_1_BASE           0xB3800000
+#define SPEAR310_RS485_1_SIZE           0x00800000
+#define SPEAR310_SOC_CONFIG_BASE        0xB4000000
+#define SPEAR310_SOC_CONFIG_SIZE        0x00000070
+/* Interrupt registers offsets and masks */
+#define INT_STS_MASK_REG                0x04
+#define SMII0_IRQ_MASK                  (1 << 0)
+#define SMII1_IRQ_MASK                  (1 << 1)
+#define SMII2_IRQ_MASK                  (1 << 2)
+#define SMII3_IRQ_MASK                  (1 << 3)
+#define WAKEUP_SMII0_IRQ_MASK           (1 << 4)
+#define WAKEUP_SMII1_IRQ_MASK           (1 << 5)
+#define WAKEUP_SMII2_IRQ_MASK           (1 << 6)
+#define WAKEUP_SMII3_IRQ_MASK           (1 << 7)
+#define UART1_IRQ_MASK                  (1 << 8)
+#define UART2_IRQ_MASK                  (1 << 9)
+#define UART3_IRQ_MASK                  (1 << 10)
+#define UART4_IRQ_MASK                  (1 << 11)
+#define UART5_IRQ_MASK                  (1 << 12)
+#define EMI_IRQ_MASK                    (1 << 13)
+#define TDM_HDLC_IRQ_MASK               (1 << 14)
+#define RS485_0_IRQ_MASK                (1 << 15)
+#define RS485_1_IRQ_MASK                (1 << 16)
+#define SHIRQ_RAS1_MASK                 0x000FF
+#define SHIRQ_RAS2_MASK                 0x01F00
+#define SHIRQ_RAS3_MASK                 0x02000
+#define SHIRQ_INTRCOMM_RAS_MASK         0x1C000
+#endif /* __MACH_SPEAR310_H */
+#endif /* CONFIG_MACH_SPEAR310 */
diff --git a/arch/arm/mach-spear3xx/include/mach/spear320.h b/arch/arm/mach-spear3xx/include/mach/spear320.h
new file mode 100644
index 000000000000..cacf17a958cd
--- /dev/null
+++ b/arch/arm/mach-spear3xx/include/mach/spear320.h
@@ -0,0 +1,96 @@
+/*
+ * arch/arm/mach-spear3xx/include/mach/spear320.h
+ *
+ * SPEAr320 Machine specific definition
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#ifdef  CONFIG_MACH_SPEAR320
+#ifndef __MACH_SPEAR320_H
+#define __MACH_SPEAR320_H
+#define SPEAR320_EMI_CTRL_BASE          0x40000000
+#define SPEAR320_EMI_CTRL_SIZE          0x08000000
+#define SPEAR320_FSMC_BASE              0x4C000000
+#define SPEAR320_FSMC_SIZE              0x01000000
+#define SPEAR320_I2S_BASE               0x60000000
+#define SPEAR320_I2S_SIZE               0x10000000
+#define SPEAR320_SDIO_BASE              0x70000000
+#define SPEAR320_SDIO_SIZE              0x10000000
+#define SPEAR320_CLCD_BASE              0x90000000
+#define SPEAR320_CLCD_SIZE              0x10000000
+#define SPEAR320_PAR_PORT_BASE          0xA0000000
+#define SPEAR320_PAR_PORT_SIZE          0x01000000
+#define SPEAR320_CAN0_BASE              0xA1000000
+#define SPEAR320_CAN0_SIZE              0x01000000
+#define SPEAR320_CAN1_BASE              0xA2000000
+#define SPEAR320_CAN1_SIZE              0x01000000
+#define SPEAR320_UART1_BASE             0xA3000000
+#define SPEAR320_UART2_BASE             0xA4000000
+#define SPEAR320_UART_SIZE              0x01000000
+#define SPEAR320_SSP0_BASE              0xA5000000
+#define SPEAR320_SSP0_SIZE              0x01000000
+#define SPEAR320_SSP1_BASE              0xA6000000
+#define SPEAR320_SSP1_SIZE              0x01000000
+#define SPEAR320_I2C_BASE               0xA7000000
+#define SPEAR320_I2C_SIZE               0x01000000
+#define SPEAR320_PWM_BASE               0xA8000000
+#define SPEAR320_PWM_SIZE               0x01000000
+#define SPEAR320_SMII0_BASE             0xAA000000
+#define SPEAR320_SMII0_SIZE             0x01000000
+#define SPEAR320_SMII1_BASE             0xAB000000
+#define SPEAR320_SMII1_SIZE             0x01000000
+#define SPEAR320_SOC_CONFIG_BASE        0xB4000000
+#define SPEAR320_SOC_CONFIG_SIZE        0x00000070
+/* Interrupt registers offsets and masks */
+#define INT_STS_MASK_REG                0x04
+#define INT_CLR_MASK_REG                0x04
+#define INT_ENB_MASK_REG                0x08
+#define GPIO_IRQ_MASK                   (1 << 0)
+#define I2S_PLAY_IRQ_MASK               (1 << 1)
+#define I2S_REC_IRQ_MASK                (1 << 2)
+#define EMI_IRQ_MASK                    (1 << 7)
+#define CLCD_IRQ_MASK                   (1 << 8)
+#define SPP_IRQ_MASK                    (1 << 9)
+#define SDIO_IRQ_MASK                   (1 << 10)
+#define CAN_U_IRQ_MASK                  (1 << 11)
+#define CAN_L_IRQ_MASK                  (1 << 12)
+#define UART1_IRQ_MASK                  (1 << 13)
+#define UART2_IRQ_MASK                  (1 << 14)
+#define SSP1_IRQ_MASK                   (1 << 15)
+#define SSP2_IRQ_MASK                   (1 << 16)
+#define SMII0_IRQ_MASK                  (1 << 17)
+#define MII1_SMII1_IRQ_MASK             (1 << 18)
+#define WAKEUP_SMII0_IRQ_MASK           (1 << 19)
+#define WAKEUP_MII1_SMII1_IRQ_MASK      (1 << 20)
+#define I2C1_IRQ_MASK                   (1 << 21)
+#define SHIRQ_RAS1_MASK                 0x000380
+#define SHIRQ_RAS3_MASK                 0x000007
+#define SHIRQ_INTRCOMM_RAS_MASK         0x3FF800
+#endif /* __MACH_SPEAR320_H */
+#endif /* CONFIG_MACH_SPEAR320 */
diff --git a/arch/arm/mach-spear3xx/include/mach/system.h b/arch/arm/mach-spear3xx/include/mach/system.h
new file mode 100644
index 000000000000..92cee6335c90
--- /dev/null
+++ b/arch/arm/mach-spear3xx/include/mach/system.h
@@ -0,0 +1,19 @@
+/*
+ * arch/arm/mach-spear3xx/include/mach/system.h
+ *
+ * SPEAr3xx Machine family specific architecture functions
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#ifndef __MACH_SYSTEM_H
+#define __MACH_SYSTEM_H
+#include <plat/system.h>
+#endif /* __MACH_SYSTEM_H */
diff --git a/arch/arm/mach-spear3xx/include/mach/timex.h b/arch/arm/mach-spear3xx/include/mach/timex.h
new file mode 100644
index 000000000000..a38cc9de876f
--- /dev/null
+++ b/arch/arm/mach-spear3xx/include/mach/timex.h
@@ -0,0 +1,19 @@
+/*
+ * arch/arm/mach-spear3xx/include/mach/timex.h
+ *
+ * SPEAr3XX machine family specific timex definitions
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#ifndef __MACH_TIMEX_H
+#define __MACH_TIMEX_H
+#include <plat/timex.h>
+#endif /* __MACH_TIMEX_H */
diff --git a/arch/arm/mach-spear3xx/include/mach/uncompress.h b/arch/arm/mach-spear3xx/include/mach/uncompress.h
new file mode 100644
index 000000000000..53ba8bbc0dfa
--- /dev/null
+++ b/arch/arm/mach-spear3xx/include/mach/uncompress.h
@@ -0,0 +1,19 @@
+/*
+ * arch/arm/mach-spear3xx/include/mach/uncompress.h
+ *
+ * Serial port stubs for kernel decompress status messages
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#ifndef __MACH_UNCOMPRESS_H
+#define __MACH_UNCOMPRESS_H
+#include <plat/uncompress.h>
+#endif /* __MACH_UNCOMPRESS_H */
diff --git a/arch/arm/mach-spear3xx/include/mach/vmalloc.h b/arch/arm/mach-spear3xx/include/mach/vmalloc.h
new file mode 100644
index 000000000000..df977b3c9a63
--- /dev/null
+++ b/arch/arm/mach-spear3xx/include/mach/vmalloc.h
@@ -0,0 +1,19 @@
+/*
+ * arch/arm/mach-spear3xx/include/mach/vmalloc.h
+ *
+ * Defining Vmalloc area for SPEAr3xx machine family
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#ifndef __MACH_VMALLOC_H
+#define __MACH_VMALLOC_H
+#include <plat/vmalloc.h>
+#endif /* __MACH_VMALLOC_H */
diff --git a/arch/arm/mach-spear3xx/spear300.c b/arch/arm/mach-spear3xx/spear300.c
new file mode 100644
index 000000000000..3560f8c1e723
--- /dev/null
+++ b/arch/arm/mach-spear3xx/spear300.c
@@ -0,0 +1,468 @@
+/*
+ * arch/arm/mach-spear3xx/spear300.c
+ *
+ * SPEAr300 machine source file
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <linux/types.h>
+#include <linux/amba/pl061.h>
+#include <linux/ptrace.h>
+#include <asm/irq.h>
+#include <mach/generic.h>
+#include <mach/spear.h>
+#include <plat/shirq.h>
+/* pad multiplexing support */
+/* muxing registers */
+#define PAD_MUX_CONFIG_REG      0x00
+#define MODE_CONFIG_REG         0x04
+/* modes */
+#define NAND_MODE                       (1 << 0)
+#define NOR_MODE                        (1 << 1)
+#define PHOTO_FRAME_MODE                (1 << 2)
+#define LEND_IP_PHONE_MODE              (1 << 3)
+#define HEND_IP_PHONE_MODE              (1 << 4)
+#define LEND_WIFI_PHONE_MODE            (1 << 5)
+#define HEND_WIFI_PHONE_MODE            (1 << 6)
+#define ATA_PABX_WI2S_MODE              (1 << 7)
+#define ATA_PABX_I2S_MODE               (1 << 8)
+#define CAML_LCDW_MODE                  (1 << 9)
+#define CAMU_LCD_MODE                   (1 << 10)
+#define CAMU_WLCD_MODE                  (1 << 11)
+#define CAML_LCD_MODE                   (1 << 12)
+#define ALL_MODES                       0x1FFF
+struct pmx_mode nand_mode = {
+        .id = NAND_MODE,
+        .name = "nand mode",
+        .mask = 0x00,
+};
+struct pmx_mode nor_mode = {
+        .id = NOR_MODE,
+        .name = "nor mode",
+        .mask = 0x01,
+};
+struct pmx_mode photo_frame_mode = {
+        .id = PHOTO_FRAME_MODE,
+        .name = "photo frame mode",
+        .mask = 0x02,
+};
+struct pmx_mode lend_ip_phone_mode = {
+        .id = LEND_IP_PHONE_MODE,
+        .name = "lend ip phone mode",
+        .mask = 0x03,
+};
+struct pmx_mode hend_ip_phone_mode = {
+        .id = HEND_IP_PHONE_MODE,
+        .name = "hend ip phone mode",
+        .mask = 0x04,
+};
+struct pmx_mode lend_wifi_phone_mode = {
+        .id = LEND_WIFI_PHONE_MODE,
+        .name = "lend wifi phone mode",
+        .mask = 0x05,
+};
+struct pmx_mode hend_wifi_phone_mode = {
+        .id = HEND_WIFI_PHONE_MODE,
+        .name = "hend wifi phone mode",
+        .mask = 0x06,
+};
+struct pmx_mode ata_pabx_wi2s_mode = {
+        .id = ATA_PABX_WI2S_MODE,
+        .name = "ata pabx wi2s mode",
+        .mask = 0x07,
+};
+struct pmx_mode ata_pabx_i2s_mode = {
+        .id = ATA_PABX_I2S_MODE,
+        .name = "ata pabx i2s mode",
+        .mask = 0x08,
+};
+struct pmx_mode caml_lcdw_mode = {
+        .id = CAML_LCDW_MODE,
+        .name = "caml lcdw mode",
+        .mask = 0x0C,
+};
+struct pmx_mode camu_lcd_mode = {
+        .id = CAMU_LCD_MODE,
+        .name = "camu lcd mode",
+        .mask = 0x0D,
+};
+struct pmx_mode camu_wlcd_mode = {
+        .id = CAMU_WLCD_MODE,
+        .name = "camu wlcd mode",
+        .mask = 0x0E,
+};
+struct pmx_mode caml_lcd_mode = {
+        .id = CAML_LCD_MODE,
+        .name = "caml lcd mode",
+        .mask = 0x0F,
+};
+/* devices */
+struct pmx_dev_mode pmx_fsmc_2_chips_modes[] = {
+        {
+                .ids = NAND_MODE | NOR_MODE | PHOTO_FRAME_MODE |
+                        ATA_PABX_WI2S_MODE | ATA_PABX_I2S_MODE,
+                .mask = PMX_FIRDA_MASK,
+        },
+};
+struct pmx_dev pmx_fsmc_2_chips = {
+        .name = "fsmc_2_chips",
+        .modes = pmx_fsmc_2_chips_modes,
+        .mode_count = ARRAY_SIZE(pmx_fsmc_2_chips_modes),
+        .enb_on_reset = 1,
+};
+struct pmx_dev_mode pmx_fsmc_4_chips_modes[] = {
+        {
+                .ids = NAND_MODE | NOR_MODE | PHOTO_FRAME_MODE |
+                        ATA_PABX_WI2S_MODE | ATA_PABX_I2S_MODE,
+                .mask = PMX_FIRDA_MASK | PMX_UART0_MASK,
+        },
+};
+struct pmx_dev pmx_fsmc_4_chips = {
+        .name = "fsmc_4_chips",
+        .modes = pmx_fsmc_4_chips_modes,
+        .mode_count = ARRAY_SIZE(pmx_fsmc_4_chips_modes),
+        .enb_on_reset = 1,
+};
+struct pmx_dev_mode pmx_keyboard_modes[] = {
+        {
+                .ids = LEND_IP_PHONE_MODE | HEND_IP_PHONE_MODE |
+                        LEND_WIFI_PHONE_MODE | HEND_WIFI_PHONE_MODE |
+                        CAML_LCDW_MODE | CAMU_LCD_MODE | CAMU_WLCD_MODE |
+                        CAML_LCD_MODE,
+                .mask = 0x0,
+        },
+};
+struct pmx_dev pmx_keyboard = {
+        .name = "keyboard",
+        .modes = pmx_keyboard_modes,
+        .mode_count = ARRAY_SIZE(pmx_keyboard_modes),
+        .enb_on_reset = 1,
+};
+struct pmx_dev_mode pmx_clcd_modes[] = {
+        {
+                .ids = PHOTO_FRAME_MODE,
+                .mask = PMX_TIMER_1_2_MASK | PMX_TIMER_3_4_MASK ,
+        }, {
+                .ids = HEND_IP_PHONE_MODE | HEND_WIFI_PHONE_MODE |
+                        CAMU_LCD_MODE | CAML_LCD_MODE,
+                .mask = PMX_TIMER_3_4_MASK,
+        },
+};
+struct pmx_dev pmx_clcd = {
+        .name = "clcd",
+        .modes = pmx_clcd_modes,
+        .mode_count = ARRAY_SIZE(pmx_clcd_modes),
+        .enb_on_reset = 1,
+};
+struct pmx_dev_mode pmx_telecom_gpio_modes[] = {
+        {
+                .ids = PHOTO_FRAME_MODE | CAMU_LCD_MODE | CAML_LCD_MODE,
+                .mask = PMX_MII_MASK,
+        }, {
+                .ids = LEND_IP_PHONE_MODE | LEND_WIFI_PHONE_MODE,
+                .mask = PMX_MII_MASK | PMX_TIMER_1_2_MASK | PMX_TIMER_3_4_MASK,
+        }, {
+                .ids = ATA_PABX_I2S_MODE | CAML_LCDW_MODE | CAMU_WLCD_MODE,
+                .mask = PMX_MII_MASK | PMX_TIMER_3_4_MASK,
+        }, {
+                .ids = HEND_IP_PHONE_MODE | HEND_WIFI_PHONE_MODE,
+                .mask = PMX_MII_MASK | PMX_TIMER_1_2_MASK,
+        }, {
+                .ids = ATA_PABX_WI2S_MODE,
+                .mask = PMX_MII_MASK | PMX_TIMER_1_2_MASK | PMX_TIMER_3_4_MASK
+                        | PMX_UART0_MODEM_MASK,
+        },
+};
+struct pmx_dev pmx_telecom_gpio = {
+        .name = "telecom_gpio",
+        .modes = pmx_telecom_gpio_modes,
+        .mode_count = ARRAY_SIZE(pmx_telecom_gpio_modes),
+        .enb_on_reset = 1,
+};
+struct pmx_dev_mode pmx_telecom_tdm_modes[] = {
+        {
+                .ids = PHOTO_FRAME_MODE | LEND_IP_PHONE_MODE |
+                        HEND_IP_PHONE_MODE | LEND_WIFI_PHONE_MODE
+                        | HEND_WIFI_PHONE_MODE | ATA_PABX_WI2S_MODE
+                        | ATA_PABX_I2S_MODE | CAML_LCDW_MODE | CAMU_LCD_MODE
+                        | CAMU_WLCD_MODE | CAML_LCD_MODE,
+                .mask = PMX_UART0_MODEM_MASK | PMX_SSP_CS_MASK,
+        },
+};
+struct pmx_dev pmx_telecom_tdm = {
+        .name = "telecom_tdm",
+        .modes = pmx_telecom_tdm_modes,
+        .mode_count = ARRAY_SIZE(pmx_telecom_tdm_modes),
+        .enb_on_reset = 1,
+};
+struct pmx_dev_mode pmx_telecom_spi_cs_i2c_clk_modes[] = {
+        {
+                .ids = LEND_IP_PHONE_MODE | HEND_IP_PHONE_MODE |
+                        LEND_WIFI_PHONE_MODE | HEND_WIFI_PHONE_MODE
+                        | ATA_PABX_WI2S_MODE | ATA_PABX_I2S_MODE |
+                        CAML_LCDW_MODE | CAML_LCD_MODE,
+                .mask = PMX_TIMER_1_2_MASK | PMX_TIMER_3_4_MASK,
+        },
+};
+struct pmx_dev pmx_telecom_spi_cs_i2c_clk = {
+        .name = "telecom_spi_cs_i2c_clk",
+        .modes = pmx_telecom_spi_cs_i2c_clk_modes,
+        .mode_count = ARRAY_SIZE(pmx_telecom_spi_cs_i2c_clk_modes),
+        .enb_on_reset = 1,
+};
+struct pmx_dev_mode pmx_telecom_camera_modes[] = {
+        {
+                .ids = CAML_LCDW_MODE | CAML_LCD_MODE,
+                .mask = PMX_MII_MASK,
+        }, {
+                .ids = CAMU_LCD_MODE | CAMU_WLCD_MODE,
+                .mask = PMX_TIMER_1_2_MASK | PMX_TIMER_3_4_MASK | PMX_MII_MASK,
+        },
+};
+struct pmx_dev pmx_telecom_camera = {
+        .name = "telecom_camera",
+        .modes = pmx_telecom_camera_modes,
+        .mode_count = ARRAY_SIZE(pmx_telecom_camera_modes),
+        .enb_on_reset = 1,
+};
+struct pmx_dev_mode pmx_telecom_dac_modes[] = {
+        {
+                .ids = ATA_PABX_I2S_MODE | CAML_LCDW_MODE | CAMU_LCD_MODE
+                        | CAMU_WLCD_MODE | CAML_LCD_MODE,
+                .mask = PMX_TIMER_1_2_MASK,
+        },
+};
+struct pmx_dev pmx_telecom_dac = {
+        .name = "telecom_dac",
+        .modes = pmx_telecom_dac_modes,
+        .mode_count = ARRAY_SIZE(pmx_telecom_dac_modes),
+        .enb_on_reset = 1,
+};
+struct pmx_dev_mode pmx_telecom_i2s_modes[] = {
+        {
+                .ids = LEND_IP_PHONE_MODE | HEND_IP_PHONE_MODE
+                        | LEND_WIFI_PHONE_MODE | HEND_WIFI_PHONE_MODE |
+                        ATA_PABX_I2S_MODE | CAML_LCDW_MODE | CAMU_LCD_MODE
+                        | CAMU_WLCD_MODE | CAML_LCD_MODE,
+                .mask = PMX_UART0_MODEM_MASK,
+        },
+};
+struct pmx_dev pmx_telecom_i2s = {
+        .name = "telecom_i2s",
+        .modes = pmx_telecom_i2s_modes,
+        .mode_count = ARRAY_SIZE(pmx_telecom_i2s_modes),
+        .enb_on_reset = 1,
+};
+struct pmx_dev_mode pmx_telecom_boot_pins_modes[] = {
+        {
+                .ids = NAND_MODE | NOR_MODE,
+                .mask = PMX_UART0_MODEM_MASK | PMX_TIMER_1_2_MASK |
+                        PMX_TIMER_3_4_MASK,
+        },
+};
+struct pmx_dev pmx_telecom_boot_pins = {
+        .name = "telecom_boot_pins",
+        .modes = pmx_telecom_boot_pins_modes,
+        .mode_count = ARRAY_SIZE(pmx_telecom_boot_pins_modes),
+        .enb_on_reset = 1,
+};
+struct pmx_dev_mode pmx_telecom_sdio_4bit_modes[] = {
+        {
+                .ids = PHOTO_FRAME_MODE | LEND_IP_PHONE_MODE |
+                        HEND_IP_PHONE_MODE | LEND_WIFI_PHONE_MODE |
+                        HEND_WIFI_PHONE_MODE | CAML_LCDW_MODE | CAMU_LCD_MODE |
+                        CAMU_WLCD_MODE | CAML_LCD_MODE | ATA_PABX_WI2S_MODE |
+                        ATA_PABX_I2S_MODE,
+                .mask = PMX_GPIO_PIN0_MASK | PMX_GPIO_PIN1_MASK |
+                        PMX_GPIO_PIN2_MASK | PMX_GPIO_PIN3_MASK |
+                        PMX_GPIO_PIN4_MASK | PMX_GPIO_PIN5_MASK,
+        },
+};
+struct pmx_dev pmx_telecom_sdio_4bit = {
+        .name = "telecom_sdio_4bit",
+        .modes = pmx_telecom_sdio_4bit_modes,
+        .mode_count = ARRAY_SIZE(pmx_telecom_sdio_4bit_modes),
+        .enb_on_reset = 1,
+};
+struct pmx_dev_mode pmx_telecom_sdio_8bit_modes[] = {
+        {
+                .ids = PHOTO_FRAME_MODE | LEND_IP_PHONE_MODE |
+                        HEND_IP_PHONE_MODE | LEND_WIFI_PHONE_MODE |
+                        HEND_WIFI_PHONE_MODE | CAML_LCDW_MODE | CAMU_LCD_MODE |
+                        CAMU_WLCD_MODE | CAML_LCD_MODE,
+                .mask = PMX_GPIO_PIN0_MASK | PMX_GPIO_PIN1_MASK |
+                        PMX_GPIO_PIN2_MASK | PMX_GPIO_PIN3_MASK |
+                        PMX_GPIO_PIN4_MASK | PMX_GPIO_PIN5_MASK | PMX_MII_MASK,
+        },
+};
+struct pmx_dev pmx_telecom_sdio_8bit = {
+        .name = "telecom_sdio_8bit",
+        .modes = pmx_telecom_sdio_8bit_modes,
+        .mode_count = ARRAY_SIZE(pmx_telecom_sdio_8bit_modes),
+        .enb_on_reset = 1,
+};
+struct pmx_dev_mode pmx_gpio1_modes[] = {
+        {
+                .ids = PHOTO_FRAME_MODE,
+                .mask = PMX_UART0_MODEM_MASK | PMX_TIMER_1_2_MASK |
+                        PMX_TIMER_3_4_MASK,
+        },
+};
+struct pmx_dev pmx_gpio1 = {
+        .name = "arm gpio1",
+        .modes = pmx_gpio1_modes,
+        .mode_count = ARRAY_SIZE(pmx_gpio1_modes),
+        .enb_on_reset = 1,
+};
+/* pmx driver structure */
+struct pmx_driver pmx_driver = {
+        .mode_reg = {.offset = MODE_CONFIG_REG, .mask = 0x0000000f},
+        .mux_reg = {.offset = PAD_MUX_CONFIG_REG, .mask = 0x00007fff},
+};
+/* Add spear300 specific devices here */
+/* arm gpio1 device registeration */
+static struct pl061_platform_data gpio1_plat_data = {
+        .gpio_base      = 8,
+        .irq_base       = SPEAR_GPIO1_INT_BASE,
+};
+struct amba_device gpio1_device = {
+        .dev = {
+                .init_name = "gpio1",
+                .platform_data = &gpio1_plat_data,
+        },
+        .res = {
+                .start = SPEAR300_GPIO_BASE,
+                .end = SPEAR300_GPIO_BASE + SPEAR300_GPIO_SIZE - 1,
+                .flags = IORESOURCE_MEM,
+        },
+        .irq = {VIRQ_GPIO1, NO_IRQ},
+};
+/* spear3xx shared irq */
+struct shirq_dev_config shirq_ras1_config[] = {
+        {
+                .virq = VIRQ_IT_PERS_S,
+                .enb_mask = IT_PERS_S_IRQ_MASK,
+                .status_mask = IT_PERS_S_IRQ_MASK,
+        }, {
+                .virq = VIRQ_IT_CHANGE_S,
+                .enb_mask = IT_CHANGE_S_IRQ_MASK,
+                .status_mask = IT_CHANGE_S_IRQ_MASK,
+        }, {
+                .virq = VIRQ_I2S,
+                .enb_mask = I2S_IRQ_MASK,
+                .status_mask = I2S_IRQ_MASK,
+        }, {
+                .virq = VIRQ_TDM,
+                .enb_mask = TDM_IRQ_MASK,
+                .status_mask = TDM_IRQ_MASK,
+        }, {
+                .virq = VIRQ_CAMERA_L,
+                .enb_mask = CAMERA_L_IRQ_MASK,
+                .status_mask = CAMERA_L_IRQ_MASK,
+        }, {
+                .virq = VIRQ_CAMERA_F,
+                .enb_mask = CAMERA_F_IRQ_MASK,
+                .status_mask = CAMERA_F_IRQ_MASK,
+        }, {
+                .virq = VIRQ_CAMERA_V,
+                .enb_mask = CAMERA_V_IRQ_MASK,
+                .status_mask = CAMERA_V_IRQ_MASK,
+        }, {
+                .virq = VIRQ_KEYBOARD,
+                .enb_mask = KEYBOARD_IRQ_MASK,
+                .status_mask = KEYBOARD_IRQ_MASK,
+        }, {
+                .virq = VIRQ_GPIO1,
+                .enb_mask = GPIO1_IRQ_MASK,
+                .status_mask = GPIO1_IRQ_MASK,
+        },
+};
+struct spear_shirq shirq_ras1 = {
+        .irq = IRQ_GEN_RAS_1,
+        .dev_config = shirq_ras1_config,
+        .dev_count = ARRAY_SIZE(shirq_ras1_config),
+        .regs = {
+                .enb_reg = INT_ENB_MASK_REG,
+                .status_reg = INT_STS_MASK_REG,
+                .status_reg_mask = SHIRQ_RAS1_MASK,
+                .clear_reg = -1,
+        },
+};
+/* spear300 routines */
+void __init spear300_init(void)
+{
+        int ret = 0;
+        /* call spear3xx family common init function */
+        spear3xx_init();
+        /* shared irq registeration */
+        shirq_ras1.regs.base =
+                ioremap(SPEAR300_TELECOM_BASE, SPEAR300_TELECOM_REG_SIZE);
+        if (shirq_ras1.regs.base) {
+                ret = spear_shirq_register(&shirq_ras1);
+                if (ret)
+                        printk(KERN_ERR "Error registering Shared IRQ\n");
+        }
+}
+void spear300_pmx_init(void)
+{
+        spear_pmx_init(&pmx_driver, SPEAR300_SOC_CONFIG_BASE,
+                        SPEAR300_SOC_CONFIG_SIZE);
+}
diff --git a/arch/arm/mach-spear3xx/spear300_evb.c b/arch/arm/mach-spear3xx/spear300_evb.c
new file mode 100644
index 000000000000..bb21db152a23
--- /dev/null
+++ b/arch/arm/mach-spear3xx/spear300_evb.c
@@ -0,0 +1,77 @@
+/*
+ * arch/arm/mach-spear3xx/spear300_evb.c
+ *
+ * SPEAr300 evaluation board source file
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+#include <mach/generic.h>
+#include <mach/spear.h>
+/* padmux devices to enable */
+static struct pmx_dev *pmx_devs[] = {
+        /* spear3xx specific devices */
+        &pmx_i2c,
+        &pmx_ssp_cs,
+        &pmx_ssp,
+        &pmx_mii,
+        &pmx_uart0,
+        /* spear300 specific devices */
+        &pmx_fsmc_2_chips,
+        &pmx_clcd,
+        &pmx_telecom_sdio_4bit,
+        &pmx_gpio1,
+};
+static struct amba_device *amba_devs[] __initdata = {
+        /* spear3xx specific devices */
+        &gpio_device,
+        &uart_device,
+        /* spear300 specific devices */
+        &gpio1_device,
+};
+static struct platform_device *plat_devs[] __initdata = {
+        /* spear3xx specific devices */
+        /* spear300 specific devices */
+};
+static void __init spear300_evb_init(void)
+{
+        unsigned int i;
+        /* call spear300 machine init function */
+        spear300_init();
+        /* padmux initialization */
+        pmx_driver.mode = &photo_frame_mode;
+        pmx_driver.devs = pmx_devs;
+        pmx_driver.devs_count = ARRAY_SIZE(pmx_devs);
+        spear300_pmx_init();
+        /* Add Platform Devices */
+        platform_add_devices(plat_devs, ARRAY_SIZE(plat_devs));
+        /* Add Amba Devices */
+        for (i = 0; i < ARRAY_SIZE(amba_devs); i++)
+                amba_device_register(amba_devs[i], &iomem_resource);
+}
+MACHINE_START(SPEAR300, "ST-SPEAR300-EVB")
+        .boot_params    =       0x00000100,
+        .map_io         =       spear3xx_map_io,
+        .init_irq       =       spear3xx_init_irq,
+        .timer          =       &spear_sys_timer,
+        .init_machine   =       spear300_evb_init,
+MACHINE_END
diff --git a/arch/arm/mach-spear3xx/spear310.c b/arch/arm/mach-spear3xx/spear310.c
new file mode 100644
index 000000000000..96a1ab824bac
--- /dev/null
+++ b/arch/arm/mach-spear3xx/spear310.c
@@ -0,0 +1,302 @@
+/*
+ * arch/arm/mach-spear3xx/spear310.c
+ *
+ * SPEAr310 machine source file
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <linux/ptrace.h>
+#include <asm/irq.h>
+#include <mach/generic.h>
+#include <mach/spear.h>
+#include <plat/shirq.h>
+/* pad multiplexing support */
+/* muxing registers */
+#define PAD_MUX_CONFIG_REG      0x08
+/* devices */
+struct pmx_dev_mode pmx_emi_cs_0_1_4_5_modes[] = {
+        {
+                .ids = 0x00,
+                .mask = PMX_TIMER_3_4_MASK,
+        },
+};
+struct pmx_dev pmx_emi_cs_0_1_4_5 = {
+        .name = "emi_cs_0_1_4_5",
+        .modes = pmx_emi_cs_0_1_4_5_modes,
+        .mode_count = ARRAY_SIZE(pmx_emi_cs_0_1_4_5_modes),
+        .enb_on_reset = 1,
+};
+struct pmx_dev_mode pmx_emi_cs_2_3_modes[] = {
+        {
+                .ids = 0x00,
+                .mask = PMX_TIMER_1_2_MASK,
+        },
+};
+struct pmx_dev pmx_emi_cs_2_3 = {
+        .name = "emi_cs_2_3",
+        .modes = pmx_emi_cs_2_3_modes,
+        .mode_count = ARRAY_SIZE(pmx_emi_cs_2_3_modes),
+        .enb_on_reset = 1,
+};
+struct pmx_dev_mode pmx_uart1_modes[] = {
+        {
+                .ids = 0x00,
+                .mask = PMX_FIRDA_MASK,
+        },
+};
+struct pmx_dev pmx_uart1 = {
+        .name = "uart1",
+        .modes = pmx_uart1_modes,
+        .mode_count = ARRAY_SIZE(pmx_uart1_modes),
+        .enb_on_reset = 1,
+};
+struct pmx_dev_mode pmx_uart2_modes[] = {
+        {
+                .ids = 0x00,
+                .mask = PMX_TIMER_1_2_MASK,
+        },
+};
+struct pmx_dev pmx_uart2 = {
+        .name = "uart2",
+        .modes = pmx_uart2_modes,
+        .mode_count = ARRAY_SIZE(pmx_uart2_modes),
+        .enb_on_reset = 1,
+};
+struct pmx_dev_mode pmx_uart3_4_5_modes[] = {
+        {
+                .ids = 0x00,
+                .mask = PMX_UART0_MODEM_MASK,
+        },
+};
+struct pmx_dev pmx_uart3_4_5 = {
+        .name = "uart3_4_5",
+        .modes = pmx_uart3_4_5_modes,
+        .mode_count = ARRAY_SIZE(pmx_uart3_4_5_modes),
+        .enb_on_reset = 1,
+};
+struct pmx_dev_mode pmx_fsmc_modes[] = {
+        {
+                .ids = 0x00,
+                .mask = PMX_SSP_CS_MASK,
+        },
+};
+struct pmx_dev pmx_fsmc = {
+        .name = "fsmc",
+        .modes = pmx_fsmc_modes,
+        .mode_count = ARRAY_SIZE(pmx_fsmc_modes),
+        .enb_on_reset = 1,
+};
+struct pmx_dev_mode pmx_rs485_0_1_modes[] = {
+        {
+                .ids = 0x00,
+                .mask = PMX_MII_MASK,
+        },
+};
+struct pmx_dev pmx_rs485_0_1 = {
+        .name = "rs485_0_1",
+        .modes = pmx_rs485_0_1_modes,
+        .mode_count = ARRAY_SIZE(pmx_rs485_0_1_modes),
+        .enb_on_reset = 1,
+};
+struct pmx_dev_mode pmx_tdm0_modes[] = {
+        {
+                .ids = 0x00,
+                .mask = PMX_MII_MASK,
+        },
+};
+struct pmx_dev pmx_tdm0 = {
+        .name = "tdm0",
+        .modes = pmx_tdm0_modes,
+        .mode_count = ARRAY_SIZE(pmx_tdm0_modes),
+        .enb_on_reset = 1,
+};
+/* pmx driver structure */
+struct pmx_driver pmx_driver = {
+        .mux_reg = {.offset = PAD_MUX_CONFIG_REG, .mask = 0x00007fff},
+};
+/* Add spear310 specific devices here */
+/* spear3xx shared irq */
+struct shirq_dev_config shirq_ras1_config[] = {
+        {
+                .virq = VIRQ_SMII0,
+                .status_mask = SMII0_IRQ_MASK,
+        }, {
+                .virq = VIRQ_SMII1,
+                .status_mask = SMII1_IRQ_MASK,
+        }, {
+                .virq = VIRQ_SMII2,
+                .status_mask = SMII2_IRQ_MASK,
+        }, {
+                .virq = VIRQ_SMII3,
+                .status_mask = SMII3_IRQ_MASK,
+        }, {
+                .virq = VIRQ_WAKEUP_SMII0,
+                .status_mask = WAKEUP_SMII0_IRQ_MASK,
+        }, {
+                .virq = VIRQ_WAKEUP_SMII1,
+                .status_mask = WAKEUP_SMII1_IRQ_MASK,
+        }, {
+                .virq = VIRQ_WAKEUP_SMII2,
+                .status_mask = WAKEUP_SMII2_IRQ_MASK,
+        }, {
+                .virq = VIRQ_WAKEUP_SMII3,
+                .status_mask = WAKEUP_SMII3_IRQ_MASK,
+        },
+};
+struct spear_shirq shirq_ras1 = {
+        .irq = IRQ_GEN_RAS_1,
+        .dev_config = shirq_ras1_config,
+        .dev_count = ARRAY_SIZE(shirq_ras1_config),
+        .regs = {
+                .enb_reg = -1,
+                .status_reg = INT_STS_MASK_REG,
+                .status_reg_mask = SHIRQ_RAS1_MASK,
+                .clear_reg = -1,
+        },
+};
+struct shirq_dev_config shirq_ras2_config[] = {
+        {
+                .virq = VIRQ_UART1,
+                .status_mask = UART1_IRQ_MASK,
+        }, {
+                .virq = VIRQ_UART2,
+                .status_mask = UART2_IRQ_MASK,
+        }, {
+                .virq = VIRQ_UART3,
+                .status_mask = UART3_IRQ_MASK,
+        }, {
+                .virq = VIRQ_UART4,
+                .status_mask = UART4_IRQ_MASK,
+        }, {
+                .virq = VIRQ_UART5,
+                .status_mask = UART5_IRQ_MASK,
+        },
+};
+struct spear_shirq shirq_ras2 = {
+        .irq = IRQ_GEN_RAS_2,
+        .dev_config = shirq_ras2_config,
+        .dev_count = ARRAY_SIZE(shirq_ras2_config),
+        .regs = {
+                .enb_reg = -1,
+                .status_reg = INT_STS_MASK_REG,
+                .status_reg_mask = SHIRQ_RAS2_MASK,
+                .clear_reg = -1,
+        },
+};
+struct shirq_dev_config shirq_ras3_config[] = {
+        {
+                .virq = VIRQ_EMI,
+                .status_mask = EMI_IRQ_MASK,
+        },
+};
+struct spear_shirq shirq_ras3 = {
+        .irq = IRQ_GEN_RAS_3,
+        .dev_config = shirq_ras3_config,
+        .dev_count = ARRAY_SIZE(shirq_ras3_config),
+        .regs = {
+                .enb_reg = -1,
+                .status_reg = INT_STS_MASK_REG,
+                .status_reg_mask = SHIRQ_RAS3_MASK,
+                .clear_reg = -1,
+        },
+};
+struct shirq_dev_config shirq_intrcomm_ras_config[] = {
+        {
+                .virq = VIRQ_TDM_HDLC,
+                .status_mask = TDM_HDLC_IRQ_MASK,
+        }, {
+                .virq = VIRQ_RS485_0,
+                .status_mask = RS485_0_IRQ_MASK,
+        }, {
+                .virq = VIRQ_RS485_1,
+                .status_mask = RS485_1_IRQ_MASK,
+        },
+};
+struct spear_shirq shirq_intrcomm_ras = {
+        .irq = IRQ_INTRCOMM_RAS_ARM,
+        .dev_config = shirq_intrcomm_ras_config,
+        .dev_count = ARRAY_SIZE(shirq_intrcomm_ras_config),
+        .regs = {
+                .enb_reg = -1,
+                .status_reg = INT_STS_MASK_REG,
+                .status_reg_mask = SHIRQ_INTRCOMM_RAS_MASK,
+                .clear_reg = -1,
+        },
+};
+/* spear310 routines */
+void __init spear310_init(void)
+{
+        void __iomem *base;
+        int ret = 0;
+        /* call spear3xx family common init function */
+        spear3xx_init();
+        /* shared irq registeration */
+        base = ioremap(SPEAR310_SOC_CONFIG_BASE, SPEAR310_SOC_CONFIG_SIZE);
+        if (base) {
+                /* shirq 1 */
+                shirq_ras1.regs.base = base;
+                ret = spear_shirq_register(&shirq_ras1);
+                if (ret)
+                        printk(KERN_ERR "Error registering Shared IRQ 1\n");
+                /* shirq 2 */
+                shirq_ras2.regs.base = base;
+                ret = spear_shirq_register(&shirq_ras2);
+                if (ret)
+                        printk(KERN_ERR "Error registering Shared IRQ 2\n");
+                /* shirq 3 */
+                shirq_ras3.regs.base = base;
+                ret = spear_shirq_register(&shirq_ras3);
+                if (ret)
+                        printk(KERN_ERR "Error registering Shared IRQ 3\n");
+                /* shirq 4 */
+                shirq_intrcomm_ras.regs.base = base;
+                ret = spear_shirq_register(&shirq_intrcomm_ras);
+                if (ret)
+                        printk(KERN_ERR "Error registering Shared IRQ 4\n");
+        }
+}
+void spear310_pmx_init(void)
+{
+        spear_pmx_init(&pmx_driver, SPEAR310_SOC_CONFIG_BASE,
+                        SPEAR310_SOC_CONFIG_SIZE);
+}
diff --git a/arch/arm/mach-spear3xx/spear310_evb.c b/arch/arm/mach-spear3xx/spear310_evb.c
new file mode 100644
index 000000000000..7facf6643199
--- /dev/null
+++ b/arch/arm/mach-spear3xx/spear310_evb.c
@@ -0,0 +1,84 @@
+/*
+ * arch/arm/mach-spear3xx/spear310_evb.c
+ *
+ * SPEAr310 evaluation board source file
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+#include <mach/generic.h>
+#include <mach/spear.h>
+/* padmux devices to enable */
+static struct pmx_dev *pmx_devs[] = {
+        /* spear3xx specific devices */
+        &pmx_i2c,
+        &pmx_ssp,
+        &pmx_gpio_pin0,
+        &pmx_gpio_pin1,
+        &pmx_gpio_pin2,
+        &pmx_gpio_pin3,
+        &pmx_gpio_pin4,
+        &pmx_gpio_pin5,
+        &pmx_uart0,
+        /* spear310 specific devices */
+        &pmx_emi_cs_0_1_4_5,
+        &pmx_emi_cs_2_3,
+        &pmx_uart1,
+        &pmx_uart2,
+        &pmx_uart3_4_5,
+        &pmx_fsmc,
+        &pmx_rs485_0_1,
+        &pmx_tdm0,
+};
+static struct amba_device *amba_devs[] __initdata = {
+        /* spear3xx specific devices */
+        &gpio_device,
+        &uart_device,
+        /* spear310 specific devices */
+};
+static struct platform_device *plat_devs[] __initdata = {
+        /* spear3xx specific devices */
+        /* spear310 specific devices */
+};
+static void __init spear310_evb_init(void)
+{
+        unsigned int i;
+        /* call spear310 machine init function */
+        spear310_init();
+        /* padmux initialization */
+        pmx_driver.mode = NULL;
+        pmx_driver.devs = pmx_devs;
+        pmx_driver.devs_count = ARRAY_SIZE(pmx_devs);
+        spear310_pmx_init();
+        /* Add Platform Devices */
+        platform_add_devices(plat_devs, ARRAY_SIZE(plat_devs));
+        /* Add Amba Devices */
+        for (i = 0; i < ARRAY_SIZE(amba_devs); i++)
+                amba_device_register(amba_devs[i], &iomem_resource);
+}
+MACHINE_START(SPEAR310, "ST-SPEAR310-EVB")
+        .boot_params    =       0x00000100,
+        .map_io         =       spear3xx_map_io,
+        .init_irq       =       spear3xx_init_irq,
+        .timer          =       &spear_sys_timer,
+        .init_machine   =       spear310_evb_init,
+MACHINE_END
diff --git a/arch/arm/mach-spear3xx/spear320.c b/arch/arm/mach-spear3xx/spear320.c
new file mode 100644
index 000000000000..6a1219549369
--- /dev/null
+++ b/arch/arm/mach-spear3xx/spear320.c
@@ -0,0 +1,549 @@
+/*
+ * arch/arm/mach-spear3xx/spear320.c
+ *
+ * SPEAr320 machine source file
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <linux/ptrace.h>
+#include <asm/irq.h>
+#include <mach/generic.h>
+#include <mach/spear.h>
+#include <plat/shirq.h>
+/* pad multiplexing support */
+/* muxing registers */
+#define PAD_MUX_CONFIG_REG      0x0C
+#define MODE_CONFIG_REG         0x10
+/* modes */
+#define AUTO_NET_SMII_MODE      (1 << 0)
+#define AUTO_NET_MII_MODE       (1 << 1)
+#define AUTO_EXP_MODE           (1 << 2)
+#define SMALL_PRINTERS_MODE     (1 << 3)
+#define ALL_MODES               0xF
+struct pmx_mode auto_net_smii_mode = {
+        .id = AUTO_NET_SMII_MODE,
+        .name = "Automation Networking SMII Mode",
+        .mask = 0x00,
+};
+struct pmx_mode auto_net_mii_mode = {
+        .id = AUTO_NET_MII_MODE,
+        .name = "Automation Networking MII Mode",
+        .mask = 0x01,
+};
+struct pmx_mode auto_exp_mode = {
+        .id = AUTO_EXP_MODE,
+        .name = "Automation Expanded Mode",
+        .mask = 0x02,
+};
+struct pmx_mode small_printers_mode = {
+        .id = SMALL_PRINTERS_MODE,
+        .name = "Small Printers Mode",
+        .mask = 0x03,
+};
+/* devices */
+struct pmx_dev_mode pmx_clcd_modes[] = {
+        {
+                .ids = AUTO_NET_SMII_MODE,
+                .mask = 0x0,
+        },
+};
+struct pmx_dev pmx_clcd = {
+        .name = "clcd",
+        .modes = pmx_clcd_modes,
+        .mode_count = ARRAY_SIZE(pmx_clcd_modes),
+        .enb_on_reset = 1,
+};
+struct pmx_dev_mode pmx_emi_modes[] = {
+        {
+                .ids = AUTO_EXP_MODE,
+                .mask = PMX_TIMER_1_2_MASK | PMX_TIMER_3_4_MASK,
+        },
+};
+struct pmx_dev pmx_emi = {
+        .name = "emi",
+        .modes = pmx_emi_modes,
+        .mode_count = ARRAY_SIZE(pmx_emi_modes),
+        .enb_on_reset = 1,
+};
+struct pmx_dev_mode pmx_fsmc_modes[] = {
+        {
+                .ids = ALL_MODES,
+                .mask = 0x0,
+        },
+};
+struct pmx_dev pmx_fsmc = {
+        .name = "fsmc",
+        .modes = pmx_fsmc_modes,
+        .mode_count = ARRAY_SIZE(pmx_fsmc_modes),
+        .enb_on_reset = 1,
+};
+struct pmx_dev_mode pmx_spp_modes[] = {
+        {
+                .ids = SMALL_PRINTERS_MODE,
+                .mask = 0x0,
+        },
+};
+struct pmx_dev pmx_spp = {
+        .name = "spp",
+        .modes = pmx_spp_modes,
+        .mode_count = ARRAY_SIZE(pmx_spp_modes),
+        .enb_on_reset = 1,
+};
+struct pmx_dev_mode pmx_sdio_modes[] = {
+        {
+                .ids = AUTO_NET_SMII_MODE | AUTO_NET_MII_MODE |
+                        SMALL_PRINTERS_MODE,
+                .mask = PMX_TIMER_1_2_MASK | PMX_TIMER_3_4_MASK,
+        },
+};
+struct pmx_dev pmx_sdio = {
+        .name = "sdio",
+        .modes = pmx_sdio_modes,
+        .mode_count = ARRAY_SIZE(pmx_sdio_modes),
+        .enb_on_reset = 1,
+};
+struct pmx_dev_mode pmx_i2s_modes[] = {
+        {
+                .ids = AUTO_NET_SMII_MODE | AUTO_NET_MII_MODE,
+                .mask = PMX_UART0_MODEM_MASK,
+        },
+};
+struct pmx_dev pmx_i2s = {
+        .name = "i2s",
+        .modes = pmx_i2s_modes,
+        .mode_count = ARRAY_SIZE(pmx_i2s_modes),
+        .enb_on_reset = 1,
+};
+struct pmx_dev_mode pmx_uart1_modes[] = {
+        {
+                .ids = ALL_MODES,
+                .mask = PMX_GPIO_PIN0_MASK | PMX_GPIO_PIN1_MASK,
+        },
+};
+struct pmx_dev pmx_uart1 = {
+        .name = "uart1",
+        .modes = pmx_uart1_modes,
+        .mode_count = ARRAY_SIZE(pmx_uart1_modes),
+        .enb_on_reset = 1,
+};
+struct pmx_dev_mode pmx_uart1_modem_modes[] = {
+        {
+                .ids = AUTO_EXP_MODE,
+                .mask = PMX_TIMER_1_2_MASK | PMX_TIMER_3_4_MASK |
+                        PMX_SSP_CS_MASK,
+        }, {
+                .ids = SMALL_PRINTERS_MODE,
+                .mask = PMX_GPIO_PIN3_MASK | PMX_GPIO_PIN4_MASK |
+                        PMX_GPIO_PIN5_MASK | PMX_SSP_CS_MASK,
+        },
+};
+struct pmx_dev pmx_uart1_modem = {
+        .name = "uart1_modem",
+        .modes = pmx_uart1_modem_modes,
+        .mode_count = ARRAY_SIZE(pmx_uart1_modem_modes),
+        .enb_on_reset = 1,
+};
+struct pmx_dev_mode pmx_uart2_modes[] = {
+        {
+                .ids = ALL_MODES,
+                .mask = PMX_FIRDA_MASK,
+        },
+};
+struct pmx_dev pmx_uart2 = {
+        .name = "uart2",
+        .modes = pmx_uart2_modes,
+        .mode_count = ARRAY_SIZE(pmx_uart2_modes),
+        .enb_on_reset = 1,
+};
+struct pmx_dev_mode pmx_touchscreen_modes[] = {
+        {
+                .ids = AUTO_NET_SMII_MODE,
+                .mask = PMX_SSP_CS_MASK,
+        },
+};
+struct pmx_dev pmx_touchscreen = {
+        .name = "touchscreen",
+        .modes = pmx_touchscreen_modes,
+        .mode_count = ARRAY_SIZE(pmx_touchscreen_modes),
+        .enb_on_reset = 1,
+};
+struct pmx_dev_mode pmx_can_modes[] = {
+        {
+                .ids = AUTO_NET_SMII_MODE | AUTO_NET_MII_MODE | AUTO_EXP_MODE,
+                .mask = PMX_GPIO_PIN2_MASK | PMX_GPIO_PIN3_MASK |
+                        PMX_GPIO_PIN4_MASK | PMX_GPIO_PIN5_MASK,
+        },
+};
+struct pmx_dev pmx_can = {
+        .name = "can",
+        .modes = pmx_can_modes,
+        .mode_count = ARRAY_SIZE(pmx_can_modes),
+        .enb_on_reset = 1,
+};
+struct pmx_dev_mode pmx_sdio_led_modes[] = {
+        {
+                .ids = AUTO_NET_SMII_MODE | AUTO_NET_MII_MODE,
+                .mask = PMX_SSP_CS_MASK,
+        },
+};
+struct pmx_dev pmx_sdio_led = {
+        .name = "sdio_led",
+        .modes = pmx_sdio_led_modes,
+        .mode_count = ARRAY_SIZE(pmx_sdio_led_modes),
+        .enb_on_reset = 1,
+};
+struct pmx_dev_mode pmx_pwm0_modes[] = {
+        {
+                .ids = AUTO_NET_SMII_MODE | AUTO_NET_MII_MODE,
+                .mask = PMX_UART0_MODEM_MASK,
+        }, {
+                .ids = AUTO_EXP_MODE | SMALL_PRINTERS_MODE,
+                .mask = PMX_MII_MASK,
+        },
+};
+struct pmx_dev pmx_pwm0 = {
+        .name = "pwm0",
+        .modes = pmx_pwm0_modes,
+        .mode_count = ARRAY_SIZE(pmx_pwm0_modes),
+        .enb_on_reset = 1,
+};
+struct pmx_dev_mode pmx_pwm1_modes[] = {
+        {
+                .ids = AUTO_NET_SMII_MODE | AUTO_NET_MII_MODE,
+                .mask = PMX_UART0_MODEM_MASK,
+        }, {
+                .ids = AUTO_EXP_MODE | SMALL_PRINTERS_MODE,
+                .mask = PMX_MII_MASK,
+        },
+};
+struct pmx_dev pmx_pwm1 = {
+        .name = "pwm1",
+        .modes = pmx_pwm1_modes,
+        .mode_count = ARRAY_SIZE(pmx_pwm1_modes),
+        .enb_on_reset = 1,
+};
+struct pmx_dev_mode pmx_pwm2_modes[] = {
+        {
+                .ids = AUTO_NET_SMII_MODE | AUTO_NET_MII_MODE,
+                .mask = PMX_SSP_CS_MASK,
+        }, {
+                .ids = AUTO_EXP_MODE | SMALL_PRINTERS_MODE,
+                .mask = PMX_MII_MASK,
+        },
+};
+struct pmx_dev pmx_pwm2 = {
+        .name = "pwm2",
+        .modes = pmx_pwm2_modes,
+        .mode_count = ARRAY_SIZE(pmx_pwm2_modes),
+        .enb_on_reset = 1,
+};
+struct pmx_dev_mode pmx_pwm3_modes[] = {
+        {
+                .ids = AUTO_EXP_MODE | SMALL_PRINTERS_MODE | AUTO_NET_SMII_MODE,
+                .mask = PMX_MII_MASK,
+        },
+};
+struct pmx_dev pmx_pwm3 = {
+        .name = "pwm3",
+        .modes = pmx_pwm3_modes,
+        .mode_count = ARRAY_SIZE(pmx_pwm3_modes),
+        .enb_on_reset = 1,
+};
+struct pmx_dev_mode pmx_ssp1_modes[] = {
+        {
+                .ids = SMALL_PRINTERS_MODE | AUTO_NET_SMII_MODE,
+                .mask = PMX_MII_MASK,
+        },
+};
+struct pmx_dev pmx_ssp1 = {
+        .name = "ssp1",
+        .modes = pmx_ssp1_modes,
+        .mode_count = ARRAY_SIZE(pmx_ssp1_modes),
+        .enb_on_reset = 1,
+};
+struct pmx_dev_mode pmx_ssp2_modes[] = {
+        {
+                .ids = AUTO_NET_SMII_MODE,
+                .mask = PMX_MII_MASK,
+        },
+};
+struct pmx_dev pmx_ssp2 = {
+        .name = "ssp2",
+        .modes = pmx_ssp2_modes,
+        .mode_count = ARRAY_SIZE(pmx_ssp2_modes),
+        .enb_on_reset = 1,
+};
+struct pmx_dev_mode pmx_mii1_modes[] = {
+        {
+                .ids = AUTO_NET_MII_MODE,
+                .mask = 0x0,
+        },
+};
+struct pmx_dev pmx_mii1 = {
+        .name = "mii1",
+        .modes = pmx_mii1_modes,
+        .mode_count = ARRAY_SIZE(pmx_mii1_modes),
+        .enb_on_reset = 1,
+};
+struct pmx_dev_mode pmx_smii0_modes[] = {
+        {
+                .ids = AUTO_NET_SMII_MODE | AUTO_EXP_MODE | SMALL_PRINTERS_MODE,
+                .mask = PMX_MII_MASK,
+        },
+};
+struct pmx_dev pmx_smii0 = {
+        .name = "smii0",
+        .modes = pmx_smii0_modes,
+        .mode_count = ARRAY_SIZE(pmx_smii0_modes),
+        .enb_on_reset = 1,
+};
+struct pmx_dev_mode pmx_smii1_modes[] = {
+        {
+                .ids = AUTO_NET_SMII_MODE | SMALL_PRINTERS_MODE,
+                .mask = PMX_MII_MASK,
+        },
+};
+struct pmx_dev pmx_smii1 = {
+        .name = "smii1",
+        .modes = pmx_smii1_modes,
+        .mode_count = ARRAY_SIZE(pmx_smii1_modes),
+        .enb_on_reset = 1,
+};
+struct pmx_dev_mode pmx_i2c1_modes[] = {
+        {
+                .ids = AUTO_EXP_MODE,
+                .mask = 0x0,
+        },
+};
+struct pmx_dev pmx_i2c1 = {
+        .name = "i2c1",
+        .modes = pmx_i2c1_modes,
+        .mode_count = ARRAY_SIZE(pmx_i2c1_modes),
+        .enb_on_reset = 1,
+};
+/* pmx driver structure */
+struct pmx_driver pmx_driver = {
+        .mode_reg = {.offset = MODE_CONFIG_REG, .mask = 0x00000007},
+        .mux_reg = {.offset = PAD_MUX_CONFIG_REG, .mask = 0x00007fff},
+};
+/* Add spear320 specific devices here */
+/* spear3xx shared irq */
+struct shirq_dev_config shirq_ras1_config[] = {
+        {
+                .virq = VIRQ_EMI,
+                .status_mask = EMI_IRQ_MASK,
+                .clear_mask = EMI_IRQ_MASK,
+        }, {
+                .virq = VIRQ_CLCD,
+                .status_mask = CLCD_IRQ_MASK,
+                .clear_mask = CLCD_IRQ_MASK,
+        }, {
+                .virq = VIRQ_SPP,
+                .status_mask = SPP_IRQ_MASK,
+                .clear_mask = SPP_IRQ_MASK,
+        },
+};
+struct spear_shirq shirq_ras1 = {
+        .irq = IRQ_GEN_RAS_1,
+        .dev_config = shirq_ras1_config,
+        .dev_count = ARRAY_SIZE(shirq_ras1_config),
+        .regs = {
+                .enb_reg = -1,
+                .status_reg = INT_STS_MASK_REG,
+                .status_reg_mask = SHIRQ_RAS1_MASK,
+                .clear_reg = INT_CLR_MASK_REG,
+                .reset_to_clear = 1,
+        },
+};
+struct shirq_dev_config shirq_ras3_config[] = {
+        {
+                .virq = VIRQ_PLGPIO,
+                .enb_mask = GPIO_IRQ_MASK,
+                .status_mask = GPIO_IRQ_MASK,
+                .clear_mask = GPIO_IRQ_MASK,
+        }, {
+                .virq = VIRQ_I2S_PLAY,
+                .enb_mask = I2S_PLAY_IRQ_MASK,
+                .status_mask = I2S_PLAY_IRQ_MASK,
+                .clear_mask = I2S_PLAY_IRQ_MASK,
+        }, {
+                .virq = VIRQ_I2S_REC,
+                .enb_mask = I2S_REC_IRQ_MASK,
+                .status_mask = I2S_REC_IRQ_MASK,
+                .clear_mask = I2S_REC_IRQ_MASK,
+        },
+};
+struct spear_shirq shirq_ras3 = {
+        .irq = IRQ_GEN_RAS_3,
+        .dev_config = shirq_ras3_config,
+        .dev_count = ARRAY_SIZE(shirq_ras3_config),
+        .regs = {
+                .enb_reg = INT_ENB_MASK_REG,
+                .reset_to_enb = 1,
+                .status_reg = INT_STS_MASK_REG,
+                .status_reg_mask = SHIRQ_RAS3_MASK,
+                .clear_reg = INT_CLR_MASK_REG,
+                .reset_to_clear = 1,
+        },
+};
+struct shirq_dev_config shirq_intrcomm_ras_config[] = {
+        {
+                .virq = VIRQ_CANU,
+                .status_mask = CAN_U_IRQ_MASK,
+                .clear_mask = CAN_U_IRQ_MASK,
+        }, {
+                .virq = VIRQ_CANL,
+                .status_mask = CAN_L_IRQ_MASK,
+                .clear_mask = CAN_L_IRQ_MASK,
+        }, {
+                .virq = VIRQ_UART1,
+                .status_mask = UART1_IRQ_MASK,
+                .clear_mask = UART1_IRQ_MASK,
+        }, {
+                .virq = VIRQ_UART2,
+                .status_mask = UART2_IRQ_MASK,
+                .clear_mask = UART2_IRQ_MASK,
+        }, {
+                .virq = VIRQ_SSP1,
+                .status_mask = SSP1_IRQ_MASK,
+                .clear_mask = SSP1_IRQ_MASK,
+        }, {
+                .virq = VIRQ_SSP2,
+                .status_mask = SSP2_IRQ_MASK,
+                .clear_mask = SSP2_IRQ_MASK,
+        }, {
+                .virq = VIRQ_SMII0,
+                .status_mask = SMII0_IRQ_MASK,
+                .clear_mask = SMII0_IRQ_MASK,
+        }, {
+                .virq = VIRQ_MII1_SMII1,
+                .status_mask = MII1_SMII1_IRQ_MASK,
+                .clear_mask = MII1_SMII1_IRQ_MASK,
+        }, {
+                .virq = VIRQ_WAKEUP_SMII0,
+                .status_mask = WAKEUP_SMII0_IRQ_MASK,
+                .clear_mask = WAKEUP_SMII0_IRQ_MASK,
+        }, {
+                .virq = VIRQ_WAKEUP_MII1_SMII1,
+                .status_mask = WAKEUP_MII1_SMII1_IRQ_MASK,
+                .clear_mask = WAKEUP_MII1_SMII1_IRQ_MASK,
+        }, {
+                .virq = VIRQ_I2C,
+                .status_mask = I2C1_IRQ_MASK,
+                .clear_mask = I2C1_IRQ_MASK,
+        },
+};
+struct spear_shirq shirq_intrcomm_ras = {
+        .irq = IRQ_INTRCOMM_RAS_ARM,
+        .dev_config = shirq_intrcomm_ras_config,
+        .dev_count = ARRAY_SIZE(shirq_intrcomm_ras_config),
+        .regs = {
+                .enb_reg = -1,
+                .status_reg = INT_STS_MASK_REG,
+                .status_reg_mask = SHIRQ_INTRCOMM_RAS_MASK,
+                .clear_reg = INT_CLR_MASK_REG,
+                .reset_to_clear = 1,
+        },
+};
+/* spear320 routines */
+void __init spear320_init(void)
+{
+        void __iomem *base;
+        int ret = 0;
+        /* call spear3xx family common init function */
+        spear3xx_init();
+        /* shared irq registeration */
+        base = ioremap(SPEAR320_SOC_CONFIG_BASE, SPEAR320_SOC_CONFIG_SIZE);
+        if (base) {
+                /* shirq 1 */
+                shirq_ras1.regs.base = base;
+                ret = spear_shirq_register(&shirq_ras1);
+                if (ret)
+                        printk(KERN_ERR "Error registering Shared IRQ 1\n");
+                /* shirq 3 */
+                shirq_ras3.regs.base = base;
+                ret = spear_shirq_register(&shirq_ras3);
+                if (ret)
+                        printk(KERN_ERR "Error registering Shared IRQ 3\n");
+                /* shirq 4 */
+                shirq_intrcomm_ras.regs.base = base;
+                ret = spear_shirq_register(&shirq_intrcomm_ras);
+                if (ret)
+                        printk(KERN_ERR "Error registering Shared IRQ 4\n");
+        }
+}
+void spear320_pmx_init(void)
+{
+        spear_pmx_init(&pmx_driver, SPEAR320_SOC_CONFIG_BASE,
+                        SPEAR320_SOC_CONFIG_SIZE);
+}
diff --git a/arch/arm/mach-spear3xx/spear320_evb.c b/arch/arm/mach-spear3xx/spear320_evb.c
new file mode 100644
index 000000000000..62ac685a4135
--- /dev/null
+++ b/arch/arm/mach-spear3xx/spear320_evb.c
@@ -0,0 +1,81 @@
+/*
+ * arch/arm/mach-spear3xx/spear320_evb.c
+ *
+ * SPEAr320 evaluation board source file
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+#include <mach/generic.h>
+#include <mach/spear.h>
+/* padmux devices to enable */
+static struct pmx_dev *pmx_devs[] = {
+        /* spear3xx specific devices */
+        &pmx_i2c,
+        &pmx_ssp,
+        &pmx_mii,
+        &pmx_uart0,
+        /* spear320 specific devices */
+        &pmx_fsmc,
+        &pmx_sdio,
+        &pmx_i2s,
+        &pmx_uart1,
+        &pmx_uart2,
+        &pmx_can,
+        &pmx_pwm0,
+        &pmx_pwm1,
+        &pmx_pwm2,
+        &pmx_mii1,
+};
+static struct amba_device *amba_devs[] __initdata = {
+        /* spear3xx specific devices */
+        &gpio_device,
+        &uart_device,
+        /* spear320 specific devices */
+};
+static struct platform_device *plat_devs[] __initdata = {
+        /* spear3xx specific devices */
+        /* spear320 specific devices */
+};
+static void __init spear320_evb_init(void)
+{
+        unsigned int i;
+        /* call spear320 machine init function */
+        spear320_init();
+        /* padmux initialization */
+        pmx_driver.mode = &auto_net_mii_mode;
+        pmx_driver.devs = pmx_devs;
+        pmx_driver.devs_count = ARRAY_SIZE(pmx_devs);
+        spear320_pmx_init();
+        /* Add Platform Devices */
+        platform_add_devices(plat_devs, ARRAY_SIZE(plat_devs));
+        /* Add Amba Devices */
+        for (i = 0; i < ARRAY_SIZE(amba_devs); i++)
+                amba_device_register(amba_devs[i], &iomem_resource);
+}
+MACHINE_START(SPEAR320, "ST-SPEAR320-EVB")
+        .boot_params    =       0x00000100,
+        .map_io         =       spear3xx_map_io,
+        .init_irq       =       spear3xx_init_irq,
+        .timer          =       &spear_sys_timer,
+        .init_machine   =       spear320_evb_init,
+MACHINE_END
diff --git a/arch/arm/mach-spear3xx/spear3xx.c b/arch/arm/mach-spear3xx/spear3xx.c
new file mode 100644
index 000000000000..e87313aeae20
--- /dev/null
+++ b/arch/arm/mach-spear3xx/spear3xx.c
@@ -0,0 +1,548 @@
+/*
+ * arch/arm/mach-spear3xx/spear3xx.c
+ *
+ * SPEAr3XX machines common source file
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <linux/types.h>
+#include <linux/amba/pl061.h>
+#include <linux/ptrace.h>
+#include <linux/io.h>
+#include <asm/hardware/vic.h>
+#include <asm/irq.h>
+#include <asm/mach/arch.h>
+#include <mach/generic.h>
+#include <mach/spear.h>
+/* Add spear3xx machines common devices here */
+/* gpio device registeration */
+static struct pl061_platform_data gpio_plat_data = {
+        .gpio_base      = 0,
+        .irq_base       = SPEAR_GPIO_INT_BASE,
+};
+struct amba_device gpio_device = {
+        .dev = {
+                .init_name = "gpio",
+                .platform_data = &gpio_plat_data,
+        },
+        .res = {
+                .start = SPEAR3XX_ICM3_GPIO_BASE,
+                .end = SPEAR3XX_ICM3_GPIO_BASE + SPEAR3XX_ICM3_GPIO_SIZE - 1,
+                .flags = IORESOURCE_MEM,
+        },
+        .irq = {IRQ_BASIC_GPIO, NO_IRQ},
+};
+/* uart device registeration */
+struct amba_device uart_device = {
+        .dev = {
+                .init_name = "uart",
+        },
+        .res = {
+                .start = SPEAR3XX_ICM1_UART_BASE,
+                .end = SPEAR3XX_ICM1_UART_BASE + SPEAR3XX_ICM1_UART_SIZE - 1,
+                .flags = IORESOURCE_MEM,
+        },
+        .irq = {IRQ_UART, NO_IRQ},
+};
+/* Do spear3xx familiy common initialization part here */
+void __init spear3xx_init(void)
+{
+        /* nothing to do for now */
+}
+/* This will initialize vic */
+void __init spear3xx_init_irq(void)
+{
+        vic_init((void __iomem *)VA_SPEAR3XX_ML1_VIC_BASE, 0, ~0, 0);
+}
+/* Following will create static virtual/physical mappings */
+struct map_desc spear3xx_io_desc[] __initdata = {
+        {
+                .virtual        = VA_SPEAR3XX_ICM1_UART_BASE,
+                .pfn            = __phys_to_pfn(SPEAR3XX_ICM1_UART_BASE),
+                .length         = SPEAR3XX_ICM1_UART_SIZE,
+                .type           = MT_DEVICE
+        }, {
+                .virtual        = VA_SPEAR3XX_ML1_VIC_BASE,
+                .pfn            = __phys_to_pfn(SPEAR3XX_ML1_VIC_BASE),
+                .length         = SPEAR3XX_ML1_VIC_SIZE,
+                .type           = MT_DEVICE
+        }, {
+                .virtual        = VA_SPEAR3XX_ICM3_SYS_CTRL_BASE,
+                .pfn            = __phys_to_pfn(SPEAR3XX_ICM3_SYS_CTRL_BASE),
+                .length         = SPEAR3XX_ICM3_SYS_CTRL_SIZE,
+                .type           = MT_DEVICE
+        }, {
+                .virtual        = VA_SPEAR3XX_ICM3_MISC_REG_BASE,
+                .pfn            = __phys_to_pfn(SPEAR3XX_ICM3_MISC_REG_BASE),
+                .length         = SPEAR3XX_ICM3_MISC_REG_SIZE,
+                .type           = MT_DEVICE
+        },
+};
+/* This will create static memory mapping for selected devices */
+void __init spear3xx_map_io(void)
+{
+        iotable_init(spear3xx_io_desc, ARRAY_SIZE(spear3xx_io_desc));
+        /* This will initialize clock framework */
+        clk_init();
+}
+/* pad multiplexing support */
+/* devices */
+struct pmx_dev_mode pmx_firda_modes[] = {
+        {
+                .ids = 0xffffffff,
+                .mask = PMX_FIRDA_MASK,
+        },
+};
+struct pmx_dev pmx_firda = {
+        .name = "firda",
+        .modes = pmx_firda_modes,
+        .mode_count = ARRAY_SIZE(pmx_firda_modes),
+        .enb_on_reset = 0,
+};
+struct pmx_dev_mode pmx_i2c_modes[] = {
+        {
+                .ids = 0xffffffff,
+                .mask = PMX_I2C_MASK,
+        },
+};
+struct pmx_dev pmx_i2c = {
+        .name = "i2c",
+        .modes = pmx_i2c_modes,
+        .mode_count = ARRAY_SIZE(pmx_i2c_modes),
+        .enb_on_reset = 0,
+};
+struct pmx_dev_mode pmx_ssp_cs_modes[] = {
+        {
+                .ids = 0xffffffff,
+                .mask = PMX_SSP_CS_MASK,
+        },
+};
+struct pmx_dev pmx_ssp_cs = {
+        .name = "ssp_chip_selects",
+        .modes = pmx_ssp_cs_modes,
+        .mode_count = ARRAY_SIZE(pmx_ssp_cs_modes),
+        .enb_on_reset = 0,
+};
+struct pmx_dev_mode pmx_ssp_modes[] = {
+        {
+                .ids = 0xffffffff,
+                .mask = PMX_SSP_MASK,
+        },
+};
+struct pmx_dev pmx_ssp = {
+        .name = "ssp",
+        .modes = pmx_ssp_modes,
+        .mode_count = ARRAY_SIZE(pmx_ssp_modes),
+        .enb_on_reset = 0,
+};
+struct pmx_dev_mode pmx_mii_modes[] = {
+        {
+                .ids = 0xffffffff,
+                .mask = PMX_MII_MASK,
+        },
+};
+struct pmx_dev pmx_mii = {
+        .name = "mii",
+        .modes = pmx_mii_modes,
+        .mode_count = ARRAY_SIZE(pmx_mii_modes),
+        .enb_on_reset = 0,
+};
+struct pmx_dev_mode pmx_gpio_pin0_modes[] = {
+        {
+                .ids = 0xffffffff,
+                .mask = PMX_GPIO_PIN0_MASK,
+        },
+};
+struct pmx_dev pmx_gpio_pin0 = {
+        .name = "gpio_pin0",
+        .modes = pmx_gpio_pin0_modes,
+        .mode_count = ARRAY_SIZE(pmx_gpio_pin0_modes),
+        .enb_on_reset = 0,
+};
+struct pmx_dev_mode pmx_gpio_pin1_modes[] = {
+        {
+                .ids = 0xffffffff,
+                .mask = PMX_GPIO_PIN1_MASK,
+        },
+};
+struct pmx_dev pmx_gpio_pin1 = {
+        .name = "gpio_pin1",
+        .modes = pmx_gpio_pin1_modes,
+        .mode_count = ARRAY_SIZE(pmx_gpio_pin1_modes),
+        .enb_on_reset = 0,
+};
+struct pmx_dev_mode pmx_gpio_pin2_modes[] = {
+        {
+                .ids = 0xffffffff,
+                .mask = PMX_GPIO_PIN2_MASK,
+        },
+};
+struct pmx_dev pmx_gpio_pin2 = {
+        .name = "gpio_pin2",
+        .modes = pmx_gpio_pin2_modes,
+        .mode_count = ARRAY_SIZE(pmx_gpio_pin2_modes),
+        .enb_on_reset = 0,
+};
+struct pmx_dev_mode pmx_gpio_pin3_modes[] = {
+        {
+                .ids = 0xffffffff,
+                .mask = PMX_GPIO_PIN3_MASK,
+        },
+};
+struct pmx_dev pmx_gpio_pin3 = {
+        .name = "gpio_pin3",
+        .modes = pmx_gpio_pin3_modes,
+        .mode_count = ARRAY_SIZE(pmx_gpio_pin3_modes),
+        .enb_on_reset = 0,
+};
+struct pmx_dev_mode pmx_gpio_pin4_modes[] = {
+        {
+                .ids = 0xffffffff,
+                .mask = PMX_GPIO_PIN4_MASK,
+        },
+};
+struct pmx_dev pmx_gpio_pin4 = {
+        .name = "gpio_pin4",
+        .modes = pmx_gpio_pin4_modes,
+        .mode_count = ARRAY_SIZE(pmx_gpio_pin4_modes),
+        .enb_on_reset = 0,
+};
+struct pmx_dev_mode pmx_gpio_pin5_modes[] = {
+        {
+                .ids = 0xffffffff,
+                .mask = PMX_GPIO_PIN5_MASK,
+        },
+};
+struct pmx_dev pmx_gpio_pin5 = {
+        .name = "gpio_pin5",
+        .modes = pmx_gpio_pin5_modes,
+        .mode_count = ARRAY_SIZE(pmx_gpio_pin5_modes),
+        .enb_on_reset = 0,
+};
+struct pmx_dev_mode pmx_uart0_modem_modes[] = {
+        {
+                .ids = 0xffffffff,
+                .mask = PMX_UART0_MODEM_MASK,
+        },
+};
+struct pmx_dev pmx_uart0_modem = {
+        .name = "uart0_modem",
+        .modes = pmx_uart0_modem_modes,
+        .mode_count = ARRAY_SIZE(pmx_uart0_modem_modes),
+        .enb_on_reset = 0,
+};
+struct pmx_dev_mode pmx_uart0_modes[] = {
+        {
+                .ids = 0xffffffff,
+                .mask = PMX_UART0_MASK,
+        },
+};
+struct pmx_dev pmx_uart0 = {
+        .name = "uart0",
+        .modes = pmx_uart0_modes,
+        .mode_count = ARRAY_SIZE(pmx_uart0_modes),
+        .enb_on_reset = 0,
+};
+struct pmx_dev_mode pmx_timer_3_4_modes[] = {
+        {
+                .ids = 0xffffffff,
+                .mask = PMX_TIMER_3_4_MASK,
+        },
+};
+struct pmx_dev pmx_timer_3_4 = {
+        .name = "timer_3_4",
+        .modes = pmx_timer_3_4_modes,
+        .mode_count = ARRAY_SIZE(pmx_timer_3_4_modes),
+        .enb_on_reset = 0,
+};
+struct pmx_dev_mode pmx_timer_1_2_modes[] = {
+        {
+                .ids = 0xffffffff,
+                .mask = PMX_TIMER_1_2_MASK,
+        },
+};
+struct pmx_dev pmx_timer_1_2 = {
+        .name = "timer_1_2",
+        .modes = pmx_timer_1_2_modes,
+        .mode_count = ARRAY_SIZE(pmx_timer_1_2_modes),
+        .enb_on_reset = 0,
+};
+#if defined(CONFIG_MACH_SPEAR310) || defined(CONFIG_MACH_SPEAR320)
+/* plgpios devices */
+struct pmx_dev_mode pmx_plgpio_0_1_modes[] = {
+        {
+                .ids = 0x00,
+                .mask = PMX_FIRDA_MASK,
+        },
+};
+struct pmx_dev pmx_plgpio_0_1 = {
+        .name = "plgpio 0 and 1",
+        .modes = pmx_plgpio_0_1_modes,
+        .mode_count = ARRAY_SIZE(pmx_plgpio_0_1_modes),
+        .enb_on_reset = 1,
+};
+struct pmx_dev_mode pmx_plgpio_2_3_modes[] = {
+        {
+                .ids = 0x00,
+                .mask = PMX_UART0_MASK,
+        },
+};
+struct pmx_dev pmx_plgpio_2_3 = {
+        .name = "plgpio 2 and 3",
+        .modes = pmx_plgpio_2_3_modes,
+        .mode_count = ARRAY_SIZE(pmx_plgpio_2_3_modes),
+        .enb_on_reset = 1,
+};
+struct pmx_dev_mode pmx_plgpio_4_5_modes[] = {
+        {
+                .ids = 0x00,
+                .mask = PMX_I2C_MASK,
+        },
+};
+struct pmx_dev pmx_plgpio_4_5 = {
+        .name = "plgpio 4 and 5",
+        .modes = pmx_plgpio_4_5_modes,
+        .mode_count = ARRAY_SIZE(pmx_plgpio_4_5_modes),
+        .enb_on_reset = 1,
+};
+struct pmx_dev_mode pmx_plgpio_6_9_modes[] = {
+        {
+                .ids = 0x00,
+                .mask = PMX_SSP_MASK,
+        },
+};
+struct pmx_dev pmx_plgpio_6_9 = {
+        .name = "plgpio 6 to 9",
+        .modes = pmx_plgpio_6_9_modes,
+        .mode_count = ARRAY_SIZE(pmx_plgpio_6_9_modes),
+        .enb_on_reset = 1,
+};
+struct pmx_dev_mode pmx_plgpio_10_27_modes[] = {
+        {
+                .ids = 0x00,
+                .mask = PMX_MII_MASK,
+        },
+};
+struct pmx_dev pmx_plgpio_10_27 = {
+        .name = "plgpio 10 to 27",
+        .modes = pmx_plgpio_10_27_modes,
+        .mode_count = ARRAY_SIZE(pmx_plgpio_10_27_modes),
+        .enb_on_reset = 1,
+};
+struct pmx_dev_mode pmx_plgpio_28_modes[] = {
+        {
+                .ids = 0x00,
+                .mask = PMX_GPIO_PIN0_MASK,
+        },
+};
+struct pmx_dev pmx_plgpio_28 = {
+        .name = "plgpio 28",
+        .modes = pmx_plgpio_28_modes,
+        .mode_count = ARRAY_SIZE(pmx_plgpio_28_modes),
+        .enb_on_reset = 1,
+};
+struct pmx_dev_mode pmx_plgpio_29_modes[] = {
+        {
+                .ids = 0x00,
+                .mask = PMX_GPIO_PIN1_MASK,
+        },
+};
+struct pmx_dev pmx_plgpio_29 = {
+        .name = "plgpio 29",
+        .modes = pmx_plgpio_29_modes,
+        .mode_count = ARRAY_SIZE(pmx_plgpio_29_modes),
+        .enb_on_reset = 1,
+};
+struct pmx_dev_mode pmx_plgpio_30_modes[] = {
+        {
+                .ids = 0x00,
+                .mask = PMX_GPIO_PIN2_MASK,
+        },
+};
+struct pmx_dev pmx_plgpio_30 = {
+        .name = "plgpio 30",
+        .modes = pmx_plgpio_30_modes,
+        .mode_count = ARRAY_SIZE(pmx_plgpio_30_modes),
+        .enb_on_reset = 1,
+};
+struct pmx_dev_mode pmx_plgpio_31_modes[] = {
+        {
+                .ids = 0x00,
+                .mask = PMX_GPIO_PIN3_MASK,
+        },
+};
+struct pmx_dev pmx_plgpio_31 = {
+        .name = "plgpio 31",
+        .modes = pmx_plgpio_31_modes,
+        .mode_count = ARRAY_SIZE(pmx_plgpio_31_modes),
+        .enb_on_reset = 1,
+};
+struct pmx_dev_mode pmx_plgpio_32_modes[] = {
+        {
+                .ids = 0x00,
+                .mask = PMX_GPIO_PIN4_MASK,
+        },
+};
+struct pmx_dev pmx_plgpio_32 = {
+        .name = "plgpio 32",
+        .modes = pmx_plgpio_32_modes,
+        .mode_count = ARRAY_SIZE(pmx_plgpio_32_modes),
+        .enb_on_reset = 1,
+};
+struct pmx_dev_mode pmx_plgpio_33_modes[] = {
+        {
+                .ids = 0x00,
+                .mask = PMX_GPIO_PIN5_MASK,
+        },
+};
+struct pmx_dev pmx_plgpio_33 = {
+        .name = "plgpio 33",
+        .modes = pmx_plgpio_33_modes,
+        .mode_count = ARRAY_SIZE(pmx_plgpio_33_modes),
+        .enb_on_reset = 1,
+};
+struct pmx_dev_mode pmx_plgpio_34_36_modes[] = {
+        {
+                .ids = 0x00,
+                .mask = PMX_SSP_CS_MASK,
+        },
+};
+struct pmx_dev pmx_plgpio_34_36 = {
+        .name = "plgpio 34 to 36",
+        .modes = pmx_plgpio_34_36_modes,
+        .mode_count = ARRAY_SIZE(pmx_plgpio_34_36_modes),
+        .enb_on_reset = 1,
+};
+struct pmx_dev_mode pmx_plgpio_37_42_modes[] = {
+        {
+                .ids = 0x00,
+                .mask = PMX_UART0_MODEM_MASK,
+        },
+};
+struct pmx_dev pmx_plgpio_37_42 = {
+        .name = "plgpio 37 to 42",
+        .modes = pmx_plgpio_37_42_modes,
+        .mode_count = ARRAY_SIZE(pmx_plgpio_37_42_modes),
+        .enb_on_reset = 1,
+};
+struct pmx_dev_mode pmx_plgpio_43_44_47_48_modes[] = {
+        {
+                .ids = 0x00,
+                .mask = PMX_TIMER_1_2_MASK,
+        },
+};
+struct pmx_dev pmx_plgpio_43_44_47_48 = {
+        .name = "plgpio 43, 44, 47 and 48",
+        .modes = pmx_plgpio_43_44_47_48_modes,
+        .mode_count = ARRAY_SIZE(pmx_plgpio_43_44_47_48_modes),
+        .enb_on_reset = 1,
+};
+struct pmx_dev_mode pmx_plgpio_45_46_49_50_modes[] = {
+        {
+                .ids = 0x00,
+                .mask = PMX_TIMER_3_4_MASK,
+        },
+};
+struct pmx_dev pmx_plgpio_45_46_49_50 = {
+        .name = "plgpio 45, 46, 49 and 50",
+        .modes = pmx_plgpio_45_46_49_50_modes,
+        .mode_count = ARRAY_SIZE(pmx_plgpio_45_46_49_50_modes),
+        .enb_on_reset = 1,
+};
+#endif
+/* spear padmux initialization function */
+void spear_pmx_init(struct pmx_driver *pmx_driver, uint base, uint size)
+{
+        int ret = 0;
+        /* pad mux initialization */
+        pmx_driver->base = ioremap(base, size);
+        if (!pmx_driver->base) {
+                ret = -ENOMEM;
+                goto pmx_fail;
+        }
+        ret = pmx_register(pmx_driver);
+        iounmap(pmx_driver->base);
+pmx_fail:
+        if (ret)
+                printk(KERN_ERR "padmux: registeration failed. err no: %d\n",
+                                ret);
+}
diff --git a/arch/arm/mach-spear6xx/Kconfig b/arch/arm/mach-spear6xx/Kconfig
new file mode 100644
index 000000000000..bddba034f862
--- /dev/null
+++ b/arch/arm/mach-spear6xx/Kconfig
@@ -0,0 +1,20 @@
+#
+# SPEAr6XX Machine configuration file
+#
+if ARCH_SPEAR6XX
+choice
+        prompt "SPEAr6XX Family"
+        default MACH_SPEAR600
+config MACH_SPEAR600
+        bool "SPEAr600"
+        help
+          Supports ST SPEAr600 Machine
+endchoice
+# Adding SPEAr6XX machine specific configuration files
+source "arch/arm/mach-spear6xx/Kconfig600"
+endif #ARCH_SPEAR6XX
diff --git a/arch/arm/mach-spear6xx/Kconfig600 b/arch/arm/mach-spear6xx/Kconfig600
new file mode 100644
index 000000000000..9e19f65eb78e
--- /dev/null
+++ b/arch/arm/mach-spear6xx/Kconfig600
@@ -0,0 +1,17 @@
+#
+# SPEAr600 machine configuration file
+#
+if MACH_SPEAR600
+choice
+        prompt "SPEAr600 Boards"
+        default BOARD_SPEAR600_EVB
+config  BOARD_SPEAR600_EVB
+        bool "SPEAr600 Evaluation Board"
+        help
+          Supports ST SPEAr600 Evaluation Board
+endchoice
+endif   #MACH_SPEAR600
diff --git a/arch/arm/mach-spear6xx/Makefile b/arch/arm/mach-spear6xx/Makefile
new file mode 100644
index 000000000000..cc1a4d82d459
--- /dev/null
+++ b/arch/arm/mach-spear6xx/Makefile
@@ -0,0 +1,12 @@
+#
+# Makefile for SPEAr6XX machine series
+#
+# common files
+obj-y   += clock.o spear6xx.o
+# spear600 specific files
+obj-$(CONFIG_MACH_SPEAR600) += spear600.o
+# spear600 boards files
+obj-$(CONFIG_BOARD_SPEAR600_EVB) += spear600_evb.o
diff --git a/arch/arm/mach-spear6xx/Makefile.boot b/arch/arm/mach-spear6xx/Makefile.boot
new file mode 100644
index 000000000000..7a1f3c0eadb8
--- /dev/null
+++ b/arch/arm/mach-spear6xx/Makefile.boot
@@ -0,0 +1,3 @@
+zreladdr-y      := 0x00008000
+params_phys-y   := 0x00000100
+initrd_phys-y   := 0x00800000
diff --git a/arch/arm/mach-spear6xx/clock.c b/arch/arm/mach-spear6xx/clock.c
new file mode 100644
index 000000000000..13e27c769685
--- /dev/null
+++ b/arch/arm/mach-spear6xx/clock.c
@@ -0,0 +1,483 @@
+/*
+ * arch/arm/mach-spear6xx/clock.c
+ *
+ * SPEAr6xx machines clock framework source file
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <mach/misc_regs.h>
+#include <plat/clock.h>
+/* root clks */
+/* 32 KHz oscillator clock */
+static struct clk osc_32k_clk = {
+        .flags = ALWAYS_ENABLED,
+        .rate = 32000,
+};
+/* 30 MHz oscillator clock */
+static struct clk osc_30m_clk = {
+        .flags = ALWAYS_ENABLED,
+        .rate = 30000000,
+};
+/* clock derived from 32 KHz osc clk */
+/* rtc clock */
+static struct clk rtc_clk = {
+        .pclk = &osc_32k_clk,
+        .en_reg = PERIP1_CLK_ENB,
+        .en_reg_bit = RTC_CLK_ENB,
+        .recalc = &follow_parent,
+};
+/* clock derived from 30 MHz osc clk */
+/* pll1 configuration structure */
+static struct pll_clk_config pll1_config = {
+        .mode_reg = PLL1_CTR,
+        .cfg_reg = PLL1_FRQ,
+};
+/* PLL1 clock */
+static struct clk pll1_clk = {
+        .pclk = &osc_30m_clk,
+        .en_reg = PLL1_CTR,
+        .en_reg_bit = PLL_ENABLE,
+        .recalc = &pll1_clk_recalc,
+        .private_data = &pll1_config,
+};
+/* PLL3 48 MHz clock */
+static struct clk pll3_48m_clk = {
+        .flags = ALWAYS_ENABLED,
+        .pclk = &osc_30m_clk,
+        .rate = 48000000,
+};
+/* watch dog timer clock */
+static struct clk wdt_clk = {
+        .flags = ALWAYS_ENABLED,
+        .pclk = &osc_30m_clk,
+        .recalc = &follow_parent,
+};
+/* clock derived from pll1 clk */
+/* cpu clock */
+static struct clk cpu_clk = {
+        .flags = ALWAYS_ENABLED,
+        .pclk = &pll1_clk,
+        .recalc = &follow_parent,
+};
+/* ahb configuration structure */
+static struct bus_clk_config ahb_config = {
+        .reg = CORE_CLK_CFG,
+        .mask = PLL_HCLK_RATIO_MASK,
+        .shift = PLL_HCLK_RATIO_SHIFT,
+};
+/* ahb clock */
+static struct clk ahb_clk = {
+        .flags = ALWAYS_ENABLED,
+        .pclk = &pll1_clk,
+        .recalc = &bus_clk_recalc,
+        .private_data = &ahb_config,
+};
+/* uart parents */
+static struct pclk_info uart_pclk_info[] = {
+        {
+                .pclk = &pll1_clk,
+                .pclk_mask = AUX_CLK_PLL1_MASK,
+                .scalable = 1,
+        }, {
+                .pclk = &pll3_48m_clk,
+                .pclk_mask = AUX_CLK_PLL3_MASK,
+                .scalable = 0,
+        },
+};
+/* uart parent select structure */
+static struct pclk_sel uart_pclk_sel = {
+        .pclk_info = uart_pclk_info,
+        .pclk_count = ARRAY_SIZE(uart_pclk_info),
+        .pclk_sel_reg = PERIP_CLK_CFG,
+        .pclk_sel_mask = UART_CLK_MASK,
+};
+/* uart configurations */
+static struct aux_clk_config uart_config = {
+        .synth_reg = UART_CLK_SYNT,
+};
+/* uart0 clock */
+static struct clk uart0_clk = {
+        .en_reg = PERIP1_CLK_ENB,
+        .en_reg_bit = UART0_CLK_ENB,
+        .pclk_sel = &uart_pclk_sel,
+        .pclk_sel_shift = UART_CLK_SHIFT,
+        .recalc = &aux_clk_recalc,
+        .private_data = &uart_config,
+};
+/* uart1 clock */
+static struct clk uart1_clk = {
+        .en_reg = PERIP1_CLK_ENB,
+        .en_reg_bit = UART1_CLK_ENB,
+        .pclk_sel = &uart_pclk_sel,
+        .pclk_sel_shift = UART_CLK_SHIFT,
+        .recalc = &aux_clk_recalc,
+        .private_data = &uart_config,
+};
+/* firda configurations */
+static struct aux_clk_config firda_config = {
+        .synth_reg = FIRDA_CLK_SYNT,
+};
+/* firda parents */
+static struct pclk_info firda_pclk_info[] = {
+        {
+                .pclk = &pll1_clk,
+                .pclk_mask = AUX_CLK_PLL1_MASK,
+                .scalable = 1,
+        }, {
+                .pclk = &pll3_48m_clk,
+                .pclk_mask = AUX_CLK_PLL3_MASK,
+                .scalable = 0,
+        },
+};
+/* firda parent select structure */
+static struct pclk_sel firda_pclk_sel = {
+        .pclk_info = firda_pclk_info,
+        .pclk_count = ARRAY_SIZE(firda_pclk_info),
+        .pclk_sel_reg = PERIP_CLK_CFG,
+        .pclk_sel_mask = FIRDA_CLK_MASK,
+};
+/* firda clock */
+static struct clk firda_clk = {
+        .en_reg = PERIP1_CLK_ENB,
+        .en_reg_bit = FIRDA_CLK_ENB,
+        .pclk_sel = &firda_pclk_sel,
+        .pclk_sel_shift = FIRDA_CLK_SHIFT,
+        .recalc = &aux_clk_recalc,
+        .private_data = &firda_config,
+};
+/* clcd configurations */
+static struct aux_clk_config clcd_config = {
+        .synth_reg = CLCD_CLK_SYNT,
+};
+/* clcd parents */
+static struct pclk_info clcd_pclk_info[] = {
+        {
+                .pclk = &pll1_clk,
+                .pclk_mask = AUX_CLK_PLL1_MASK,
+                .scalable = 1,
+        }, {
+                .pclk = &pll3_48m_clk,
+                .pclk_mask = AUX_CLK_PLL3_MASK,
+                .scalable = 0,
+        },
+};
+/* clcd parent select structure */
+static struct pclk_sel clcd_pclk_sel = {
+        .pclk_info = clcd_pclk_info,
+        .pclk_count = ARRAY_SIZE(clcd_pclk_info),
+        .pclk_sel_reg = PERIP_CLK_CFG,
+        .pclk_sel_mask = CLCD_CLK_MASK,
+};
+/* clcd clock */
+static struct clk clcd_clk = {
+        .en_reg = PERIP1_CLK_ENB,
+        .en_reg_bit = CLCD_CLK_ENB,
+        .pclk_sel = &clcd_pclk_sel,
+        .pclk_sel_shift = CLCD_CLK_SHIFT,
+        .recalc = &aux_clk_recalc,
+        .private_data = &clcd_config,
+};
+/* gpt parents */
+static struct pclk_info gpt_pclk_info[] = {
+        {
+                .pclk = &pll1_clk,
+                .pclk_mask = AUX_CLK_PLL1_MASK,
+                .scalable = 1,
+        }, {
+                .pclk = &pll3_48m_clk,
+                .pclk_mask = AUX_CLK_PLL3_MASK,
+                .scalable = 0,
+        },
+};
+/* gpt parent select structure */
+static struct pclk_sel gpt_pclk_sel = {
+        .pclk_info = gpt_pclk_info,
+        .pclk_count = ARRAY_SIZE(gpt_pclk_info),
+        .pclk_sel_reg = PERIP_CLK_CFG,
+        .pclk_sel_mask = GPT_CLK_MASK,
+};
+/* gpt0_1 configurations */
+static struct aux_clk_config gpt0_1_config = {
+        .synth_reg = PRSC1_CLK_CFG,
+};
+/* gpt0 ARM1 subsystem timer clock */
+static struct clk gpt0_clk = {
+        .flags = ALWAYS_ENABLED,
+        .pclk_sel = &gpt_pclk_sel,
+        .pclk_sel_shift = GPT0_CLK_SHIFT,
+        .recalc = &gpt_clk_recalc,
+        .private_data = &gpt0_1_config,
+};
+/* gpt1 timer clock */
+static struct clk gpt1_clk = {
+        .flags = ALWAYS_ENABLED,
+        .pclk_sel = &gpt_pclk_sel,
+        .pclk_sel_shift = GPT1_CLK_SHIFT,
+        .recalc = &gpt_clk_recalc,
+        .private_data = &gpt0_1_config,
+};
+/* gpt2 configurations */
+static struct aux_clk_config gpt2_config = {
+        .synth_reg = PRSC2_CLK_CFG,
+};
+/* gpt2 timer clock */
+static struct clk gpt2_clk = {
+        .en_reg = PERIP1_CLK_ENB,
+        .en_reg_bit = GPT2_CLK_ENB,
+        .pclk_sel = &gpt_pclk_sel,
+        .pclk_sel_shift = GPT2_CLK_SHIFT,
+        .recalc = &gpt_clk_recalc,
+        .private_data = &gpt2_config,
+};
+/* gpt3 configurations */
+static struct aux_clk_config gpt3_config = {
+        .synth_reg = PRSC3_CLK_CFG,
+};
+/* gpt3 timer clock */
+static struct clk gpt3_clk = {
+        .en_reg = PERIP1_CLK_ENB,
+        .en_reg_bit = GPT3_CLK_ENB,
+        .pclk_sel = &gpt_pclk_sel,
+        .pclk_sel_shift = GPT3_CLK_SHIFT,
+        .recalc = &gpt_clk_recalc,
+        .private_data = &gpt3_config,
+};
+/* clock derived from pll3 clk */
+/* usbh0 clock */
+static struct clk usbh0_clk = {
+        .pclk = &pll3_48m_clk,
+        .en_reg = PERIP1_CLK_ENB,
+        .en_reg_bit = USBH0_CLK_ENB,
+        .recalc = &follow_parent,
+};
+/* usbh1 clock */
+static struct clk usbh1_clk = {
+        .pclk = &pll3_48m_clk,
+        .en_reg = PERIP1_CLK_ENB,
+        .en_reg_bit = USBH1_CLK_ENB,
+        .recalc = &follow_parent,
+};
+/* usbd clock */
+static struct clk usbd_clk = {
+        .pclk = &pll3_48m_clk,
+        .en_reg = PERIP1_CLK_ENB,
+        .en_reg_bit = USBD_CLK_ENB,
+        .recalc = &follow_parent,
+};
+/* clock derived from ahb clk */
+/* apb configuration structure */
+static struct bus_clk_config apb_config = {
+        .reg = CORE_CLK_CFG,
+        .mask = HCLK_PCLK_RATIO_MASK,
+        .shift = HCLK_PCLK_RATIO_SHIFT,
+};
+/* apb clock */
+static struct clk apb_clk = {
+        .flags = ALWAYS_ENABLED,
+        .pclk = &ahb_clk,
+        .recalc = &bus_clk_recalc,
+        .private_data = &apb_config,
+};
+/* i2c clock */
+static struct clk i2c_clk = {
+        .pclk = &ahb_clk,
+        .en_reg = PERIP1_CLK_ENB,
+        .en_reg_bit = I2C_CLK_ENB,
+        .recalc = &follow_parent,
+};
+/* dma clock */
+static struct clk dma_clk = {
+        .pclk = &ahb_clk,
+        .en_reg = PERIP1_CLK_ENB,
+        .en_reg_bit = DMA_CLK_ENB,
+        .recalc = &follow_parent,
+};
+/* jpeg clock */
+static struct clk jpeg_clk = {
+        .pclk = &ahb_clk,
+        .en_reg = PERIP1_CLK_ENB,
+        .en_reg_bit = JPEG_CLK_ENB,
+        .recalc = &follow_parent,
+};
+/* gmac clock */
+static struct clk gmac_clk = {
+        .pclk = &ahb_clk,
+        .en_reg = PERIP1_CLK_ENB,
+        .en_reg_bit = GMAC_CLK_ENB,
+        .recalc = &follow_parent,
+};
+/* smi clock */
+static struct clk smi_clk = {
+        .pclk = &ahb_clk,
+        .en_reg = PERIP1_CLK_ENB,
+        .en_reg_bit = SMI_CLK_ENB,
+        .recalc = &follow_parent,
+};
+/* fsmc clock */
+static struct clk fsmc_clk = {
+        .pclk = &ahb_clk,
+        .en_reg = PERIP1_CLK_ENB,
+        .en_reg_bit = FSMC_CLK_ENB,
+        .recalc = &follow_parent,
+};
+/* clock derived from apb clk */
+/* adc clock */
+static struct clk adc_clk = {
+        .pclk = &apb_clk,
+        .en_reg = PERIP1_CLK_ENB,
+        .en_reg_bit = ADC_CLK_ENB,
+        .recalc = &follow_parent,
+};
+/* ssp0 clock */
+static struct clk ssp0_clk = {
+        .pclk = &apb_clk,
+        .en_reg = PERIP1_CLK_ENB,
+        .en_reg_bit = SSP0_CLK_ENB,
+        .recalc = &follow_parent,
+};
+/* ssp1 clock */
+static struct clk ssp1_clk = {
+        .pclk = &apb_clk,
+        .en_reg = PERIP1_CLK_ENB,
+        .en_reg_bit = SSP1_CLK_ENB,
+        .recalc = &follow_parent,
+};
+/* ssp2 clock */
+static struct clk ssp2_clk = {
+        .pclk = &apb_clk,
+        .en_reg = PERIP1_CLK_ENB,
+        .en_reg_bit = SSP2_CLK_ENB,
+        .recalc = &follow_parent,
+};
+/* gpio0 ARM subsystem clock */
+static struct clk gpio0_clk = {
+        .flags = ALWAYS_ENABLED,
+        .pclk = &apb_clk,
+        .recalc = &follow_parent,
+};
+/* gpio1 clock */
+static struct clk gpio1_clk = {
+        .pclk = &apb_clk,
+        .en_reg = PERIP1_CLK_ENB,
+        .en_reg_bit = GPIO1_CLK_ENB,
+        .recalc = &follow_parent,
+};
+/* gpio2 clock */
+static struct clk gpio2_clk = {
+        .pclk = &apb_clk,
+        .en_reg = PERIP1_CLK_ENB,
+        .en_reg_bit = GPIO2_CLK_ENB,
+        .recalc = &follow_parent,
+};
+/* array of all spear 6xx clock lookups */
+static struct clk_lookup spear_clk_lookups[] = {
+        /* root clks */
+        { .con_id = "osc_32k_clk",      .clk = &osc_32k_clk},
+        { .con_id = "osc_30m_clk",      .clk = &osc_30m_clk},
+        /* clock derived from 32 KHz os          clk */
+        { .dev_id = "rtc",              .clk = &rtc_clk},
+        /* clock derived from 30 MHz os          clk */
+        { .con_id = "pll1_clk",         .clk = &pll1_clk},
+        { .con_id = "pll3_48m_clk",     .clk = &pll3_48m_clk},
+        { .dev_id = "wdt",              .clk = &wdt_clk},
+        /* clock derived from pll1 clk */
+        { .con_id = "cpu_clk",          .clk = &cpu_clk},
+        { .con_id = "ahb_clk",          .clk = &ahb_clk},
+        { .dev_id = "uart0",            .clk = &uart0_clk},
+        { .dev_id = "uart1",            .clk = &uart1_clk},
+        { .dev_id = "firda",            .clk = &firda_clk},
+        { .dev_id = "clcd",             .clk = &clcd_clk},
+        { .dev_id = "gpt0",             .clk = &gpt0_clk},
+        { .dev_id = "gpt1",             .clk = &gpt1_clk},
+        { .dev_id = "gpt2",             .clk = &gpt2_clk},
+        { .dev_id = "gpt3",             .clk = &gpt3_clk},
+        /* clock derived from pll3 clk */
+        { .dev_id = "usbh0",            .clk = &usbh0_clk},
+        { .dev_id = "usbh1",            .clk = &usbh1_clk},
+        { .dev_id = "usbd",             .clk = &usbd_clk},
+        /* clock derived from ahb clk */
+        { .con_id = "apb_clk",          .clk = &apb_clk},
+        { .dev_id = "i2c",              .clk = &i2c_clk},
+        { .dev_id = "dma",              .clk = &dma_clk},
+        { .dev_id = "jpeg",             .clk = &jpeg_clk},
+        { .dev_id = "gmac",             .clk = &gmac_clk},
+        { .dev_id = "smi",              .clk = &smi_clk},
+        { .dev_id = "fsmc",             .clk = &fsmc_clk},
+        /* clock derived from apb clk */
+        { .dev_id = "adc",              .clk = &adc_clk},
+        { .dev_id = "ssp0",             .clk = &ssp0_clk},
+        { .dev_id = "ssp1",             .clk = &ssp1_clk},
+        { .dev_id = "ssp2",             .clk = &ssp2_clk},
+        { .dev_id = "gpio0",            .clk = &gpio0_clk},
+        { .dev_id = "gpio1",            .clk = &gpio1_clk},
+        { .dev_id = "gpio2",            .clk = &gpio2_clk},
+};
+void __init clk_init(void)
+{
+        int i;
+        for (i = 0; i < ARRAY_SIZE(spear_clk_lookups); i++)
+                clk_register(&spear_clk_lookups[i]);
+        recalc_root_clocks();
+}
diff --git a/arch/arm/mach-spear6xx/include/mach/clkdev.h b/arch/arm/mach-spear6xx/include/mach/clkdev.h
new file mode 100644
index 000000000000..05676bf440d3
--- /dev/null
+++ b/arch/arm/mach-spear6xx/include/mach/clkdev.h
@@ -0,0 +1,19 @@
+/*
+ * arch/arm/mach-spear6xx/include/mach/clkdev.h
+ *
+ * Clock Dev framework definitions for SPEAr6xx machine family
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#ifndef __MACH_CLKDEV_H
+#define __MACH_CLKDEV_H
+#include <plat/clkdev.h>
+#endif /* __MACH_CLKDEV_H */
diff --git a/arch/arm/mach-spear6xx/include/mach/debug-macro.S b/arch/arm/mach-spear6xx/include/mach/debug-macro.S
new file mode 100644
index 000000000000..0f3ea39edd96
--- /dev/null
+++ b/arch/arm/mach-spear6xx/include/mach/debug-macro.S
@@ -0,0 +1,14 @@
+/*
+ * arch/arm/mach-spear6xx/include/mach/debug-macro.S
+ *
+ * Debugging macro include header for SPEAr6xx machine family
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Rajeev Kumar<rajeev-dlh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <plat/debug-macro.S>
diff --git a/arch/arm/mach-spear6xx/include/mach/entry-macro.S b/arch/arm/mach-spear6xx/include/mach/entry-macro.S
new file mode 100644
index 000000000000..9eaecaeafcf0
--- /dev/null
+++ b/arch/arm/mach-spear6xx/include/mach/entry-macro.S
@@ -0,0 +1,55 @@
+/*
+ * arch/arm/mach-spear6xx/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for SPEAr6xx machine family
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Rajeev Kumar<rajeev-dlh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <mach/hardware.h>
+#include <mach/spear.h>
+#include <asm/hardware/vic.h>
+                .macro  disable_fiq
+                .endm
+                .macro  get_irqnr_preamble, base, tmp
+                .endm
+                .macro  arch_ret_to_user, tmp1, tmp2
+                .endm
+                .macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
+                ldr     \base, =VA_SPEAR6XX_CPU_VIC_PRI_BASE
+                ldr     \irqstat, [\base, #VIC_IRQ_STATUS]      @ get status
+                mov     \irqnr, #0
+                teq     \irqstat, #0
+                bne     1001f
+                ldr     \base, =VA_SPEAR6XX_CPU_VIC_SEC_BASE
+                ldr     \irqstat, [\base, #VIC_IRQ_STATUS]      @ get status
+                teq     \irqstat, #0
+                beq     1002f                           @ this will set/reset
+                                                        @ zero register
+                mov     \irqnr, #32
+1001:
+                /*
+                 * Following code will find bit position of least significang
+                 * bit set in irqstat, using following equation
+                 * least significant bit set in n = (n & ~(n-1))
+                 */
+                sub     \tmp, \irqstat, #1              @ tmp = irqstat - 1
+                mvn     \tmp, \tmp                      @ tmp = ~tmp
+                and     \irqstat, \irqstat, \tmp        @ irqstat &= tmp
+                /* Now, irqstat is = bit no. of 1st bit set in vic irq status */
+                clz     \tmp, \irqstat                  @ tmp = leading zeros
+                rsb     \tmp, \tmp, #0x1F               @ tmp = 32 - tmp - 1
+                add     \irqnr, \irqnr, \tmp
+1002:           /* EQ will be set if no irqs pending */
+                .endm
diff --git a/arch/arm/mach-spear6xx/include/mach/generic.h b/arch/arm/mach-spear6xx/include/mach/generic.h
new file mode 100644
index 000000000000..16205a538756
--- /dev/null
+++ b/arch/arm/mach-spear6xx/include/mach/generic.h
@@ -0,0 +1,45 @@
+/*
+ * arch/arm/mach-spear6xx/include/mach/generic.h
+ *
+ * SPEAr6XX machine family specific generic header file
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Rajeev Kumar<rajeev-dlh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#ifndef __MACH_GENERIC_H
+#define __MACH_GENERIC_H
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/amba/bus.h>
+/*
+ * Each GPT has 2 timer channels
+ * Following GPT channels will be used as clock source and clockevent
+ */
+#define SPEAR_GPT0_BASE         SPEAR6XX_CPU_TMR_BASE
+#define SPEAR_GPT0_CHAN0_IRQ    IRQ_CPU_GPT1_1
+#define SPEAR_GPT0_CHAN1_IRQ    IRQ_CPU_GPT1_2
+/* Add spear6xx family device structure declarations here */
+extern struct amba_device gpio_device[];
+extern struct amba_device uart_device[];
+extern struct sys_timer spear_sys_timer;
+/* Add spear6xx family function declarations here */
+void __init spear6xx_map_io(void);
+void __init spear6xx_init_irq(void);
+void __init spear6xx_init(void);
+void __init spear600_init(void);
+void __init clk_init(void);
+/* Add spear600 machine device structure declarations here */
+#endif /* __MACH_GENERIC_H */
diff --git a/arch/arm/mach-spear6xx/include/mach/gpio.h b/arch/arm/mach-spear6xx/include/mach/gpio.h
new file mode 100644
index 000000000000..3a789dbb69f7
--- /dev/null
+++ b/arch/arm/mach-spear6xx/include/mach/gpio.h
@@ -0,0 +1,19 @@
+/*
+ * arch/arm/mach-spear6xx/include/mach/gpio.h
+ *
+ * GPIO macros for SPEAr6xx machine family
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#ifndef __MACH_GPIO_H
+#define __MACH_GPIO_H
+#include <plat/gpio.h>
+#endif /* __MACH_GPIO_H */
diff --git a/arch/arm/mach-spear6xx/include/mach/hardware.h b/arch/arm/mach-spear6xx/include/mach/hardware.h
new file mode 100644
index 000000000000..7545116deca9
--- /dev/null
+++ b/arch/arm/mach-spear6xx/include/mach/hardware.h
@@ -0,0 +1,21 @@
+/*
+ * arch/arm/mach-spear6xx/include/mach/hardware.h
+ *
+ * Hardware definitions for SPEAr6xx machine family
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Rajeev Kumar<rajeev-dlh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#ifndef __MACH_HARDWARE_H
+#define __MACH_HARDWARE_H
+/* Vitual to physical translation of statically mapped space */
+#define IO_ADDRESS(x)           (x | 0xF0000000)
+#endif /* __MACH_HARDWARE_H */
diff --git a/arch/arm/mach-spear6xx/include/mach/io.h b/arch/arm/mach-spear6xx/include/mach/io.h
new file mode 100644
index 000000000000..fb7c106cea94
--- /dev/null
+++ b/arch/arm/mach-spear6xx/include/mach/io.h
@@ -0,0 +1,20 @@
+/*
+ * arch/arm/mach-spear6xx/include/mach/io.h
+ *
+ * IO definitions for SPEAr6xx machine family
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Rajeev Kumar Kumar<rajeev-dlh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#ifndef __MACH_IO_H
+#define __MACH_IO_H
+#include <plat/io.h>
+#endif  /* __MACH_IO_H */
diff --git a/arch/arm/mach-spear6xx/include/mach/irqs.h b/arch/arm/mach-spear6xx/include/mach/irqs.h
new file mode 100644
index 000000000000..8f214b03d75d
--- /dev/null
+++ b/arch/arm/mach-spear6xx/include/mach/irqs.h
@@ -0,0 +1,97 @@
+/*
+ * arch/arm/mach-spear6xx/include/mach/irqs.h
+ *
+ * IRQ helper macros for SPEAr6xx machine family
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Rajeev Kumar<rajeev-dlh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#ifndef __MACH_IRQS_H
+#define __MACH_IRQS_H
+/* IRQ definitions */
+/* VIC 1 */
+#define IRQ_INTRCOMM_SW_IRQ                     0
+#define IRQ_INTRCOMM_CPU_1                      1
+#define IRQ_INTRCOMM_CPU_2                      2
+#define IRQ_INTRCOMM_RAS2A11_1                  3
+#define IRQ_INTRCOMM_RAS2A11_2                  4
+#define IRQ_INTRCOMM_RAS2A12_1                  5
+#define IRQ_INTRCOMM_RAS2A12_2                  6
+#define IRQ_GEN_RAS_0                           7
+#define IRQ_GEN_RAS_1                           8
+#define IRQ_GEN_RAS_2                           9
+#define IRQ_GEN_RAS_3                           10
+#define IRQ_GEN_RAS_4                           11
+#define IRQ_GEN_RAS_5                           12
+#define IRQ_GEN_RAS_6                           13
+#define IRQ_GEN_RAS_7                           14
+#define IRQ_GEN_RAS_8                           15
+#define IRQ_CPU_GPT1_1                          16
+#define IRQ_CPU_GPT1_2                          17
+#define IRQ_LOCAL_GPIO                          18
+#define IRQ_PLL_UNLOCK                          19
+#define IRQ_JPEG                                20
+#define IRQ_FSMC                                21
+#define IRQ_IRDA                                22
+#define IRQ_RESERVED                            23
+#define IRQ_UART_0                              24
+#define IRQ_UART_1                              25
+#define IRQ_SSP_1                               26
+#define IRQ_SSP_2                               27
+#define IRQ_I2C                                 28
+#define IRQ_GEN_RAS_9                           29
+#define IRQ_GEN_RAS_10                          30
+#define IRQ_GEN_RAS_11                          31
+/* VIC 2 */
+#define IRQ_APPL_GPT1_1                         32
+#define IRQ_APPL_GPT1_2                         33
+#define IRQ_APPL_GPT2_1                         34
+#define IRQ_APPL_GPT2_2                         35
+#define IRQ_APPL_GPIO                           36
+#define IRQ_APPL_SSP                            37
+#define IRQ_APPL_ADC                            38
+#define IRQ_APPL_RESERVED                       39
+#define IRQ_AHB_EXP_MASTER                      40
+#define IRQ_DDR_CONTROLLER                      41
+#define IRQ_BASIC_DMA                           42
+#define IRQ_BASIC_RESERVED1                     43
+#define IRQ_BASIC_SMI                           44
+#define IRQ_BASIC_CLCD                          45
+#define IRQ_EXP_AHB_1                           46
+#define IRQ_EXP_AHB_2                           47
+#define IRQ_BASIC_GPT1_1                        48
+#define IRQ_BASIC_GPT1_2                        49
+#define IRQ_BASIC_RTC                           50
+#define IRQ_BASIC_GPIO                          51
+#define IRQ_BASIC_WDT                           52
+#define IRQ_BASIC_RESERVED                      53
+#define IRQ_AHB_EXP_SLAVE                       54
+#define IRQ_GMAC_1                              55
+#define IRQ_GMAC_2                              56
+#define IRQ_USB_DEV                             57
+#define IRQ_USB_H_OHCI_0                        58
+#define IRQ_USB_H_EHCI_0                        59
+#define IRQ_USB_H_OHCI_1                        60
+#define IRQ_USB_H_EHCI_1                        61
+#define IRQ_EXP_AHB_3                           62
+#define IRQ_EXP_AHB_4                           63
+#define IRQ_VIC_END                             64
+/* GPIO pins virtual irqs */
+#define SPEAR_GPIO_INT_BASE     IRQ_VIC_END
+#define SPEAR_GPIO0_INT_BASE    SPEAR_GPIO_INT_BASE
+#define SPEAR_GPIO1_INT_BASE    (SPEAR_GPIO0_INT_BASE + 8)
+#define SPEAR_GPIO2_INT_BASE    (SPEAR_GPIO1_INT_BASE + 8)
+#define SPEAR_GPIO_INT_END      (SPEAR_GPIO2_INT_BASE + 8)
+#define VIRTUAL_IRQS            (SPEAR_GPIO_INT_END - IRQ_VIC_END)
+#define NR_IRQS                 (IRQ_VIC_END + VIRTUAL_IRQS)
+#endif  /* __MACH_IRQS_H */
diff --git a/arch/arm/mach-spear6xx/include/mach/memory.h b/arch/arm/mach-spear6xx/include/mach/memory.h
new file mode 100644
index 000000000000..781f088fc228
--- /dev/null
+++ b/arch/arm/mach-spear6xx/include/mach/memory.h
@@ -0,0 +1,19 @@
+/*
+ * arch/arm/mach-spear6xx/include/mach/memory.h
+ *
+ * Memory map for SPEAr6xx machine family
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Rajeev Kumar<rajeev-dlh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#ifndef __MACH_MEMORY_H
+#define __MACH_MEMORY_H
+#include <plat/memory.h>
+#endif  /* __MACH_MEMORY_H */
diff --git a/arch/arm/mach-spear6xx/include/mach/misc_regs.h b/arch/arm/mach-spear6xx/include/mach/misc_regs.h
new file mode 100644
index 000000000000..03908036b0d0
--- /dev/null
+++ b/arch/arm/mach-spear6xx/include/mach/misc_regs.h
@@ -0,0 +1,173 @@
+/*
+ * arch/arm/mach-spear6xx/include/mach/misc_regs.h
+ *
+ * Miscellaneous registers definitions for SPEAr6xx machine family
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#ifndef __MACH_MISC_REGS_H
+#define __MACH_MISC_REGS_H
+#include <mach/spear.h>
+#define MISC_BASE               VA_SPEAR6XX_ICM3_MISC_REG_BASE
+#define SOC_CFG_CTR             ((unsigned int *)(MISC_BASE + 0x000))
+#define DIAG_CFG_CTR            ((unsigned int *)(MISC_BASE + 0x004))
+#define PLL1_CTR                ((unsigned int *)(MISC_BASE + 0x008))
+#define PLL1_FRQ                ((unsigned int *)(MISC_BASE + 0x00C))
+#define PLL1_MOD                ((unsigned int *)(MISC_BASE + 0x010))
+#define PLL2_CTR                ((unsigned int *)(MISC_BASE + 0x014))
+/* PLL_CTR register masks */
+#define PLL_ENABLE              2
+#define PLL_MODE_SHIFT          4
+#define PLL_MODE_MASK           0x3
+#define PLL_MODE_NORMAL         0
+#define PLL_MODE_FRACTION       1
+#define PLL_MODE_DITH_DSB       2
+#define PLL_MODE_DITH_SSB       3
+#define PLL2_FRQ                ((unsigned int *)(MISC_BASE + 0x018))
+/* PLL FRQ register masks */
+#define PLL_DIV_N_SHIFT         0
+#define PLL_DIV_N_MASK          0xFF
+#define PLL_DIV_P_SHIFT         8
+#define PLL_DIV_P_MASK          0x7
+#define PLL_NORM_FDBK_M_SHIFT   24
+#define PLL_NORM_FDBK_M_MASK    0xFF
+#define PLL_DITH_FDBK_M_SHIFT   16
+#define PLL_DITH_FDBK_M_MASK    0xFFFF
+#define PLL2_MOD                ((unsigned int *)(MISC_BASE + 0x01C))
+#define PLL_CLK_CFG             ((unsigned int *)(MISC_BASE + 0x020))
+#define CORE_CLK_CFG            ((unsigned int *)(MISC_BASE + 0x024))
+/* CORE CLK CFG register masks */
+#define PLL_HCLK_RATIO_SHIFT    10
+#define PLL_HCLK_RATIO_MASK     0x3
+#define HCLK_PCLK_RATIO_SHIFT   8
+#define HCLK_PCLK_RATIO_MASK    0x3
+#define PERIP_CLK_CFG           ((unsigned int *)(MISC_BASE + 0x028))
+/* PERIP_CLK_CFG register masks */
+#define CLCD_CLK_SHIFT          2
+#define CLCD_CLK_MASK           0x3
+#define UART_CLK_SHIFT          4
+#define UART_CLK_MASK           0x1
+#define FIRDA_CLK_SHIFT         5
+#define FIRDA_CLK_MASK          0x3
+#define GPT0_CLK_SHIFT          8
+#define GPT1_CLK_SHIFT          10
+#define GPT2_CLK_SHIFT          11
+#define GPT3_CLK_SHIFT          12
+#define GPT_CLK_MASK            0x1
+#define AUX_CLK_PLL3_MASK       0
+#define AUX_CLK_PLL1_MASK       1
+#define PERIP1_CLK_ENB          ((unsigned int *)(MISC_BASE + 0x02C))
+/* PERIP1_CLK_ENB register masks */
+#define UART0_CLK_ENB           3
+#define UART1_CLK_ENB           4
+#define SSP0_CLK_ENB            5
+#define SSP1_CLK_ENB            6
+#define I2C_CLK_ENB             7
+#define JPEG_CLK_ENB            8
+#define FSMC_CLK_ENB            9
+#define FIRDA_CLK_ENB           10
+#define GPT2_CLK_ENB            11
+#define GPT3_CLK_ENB            12
+#define GPIO2_CLK_ENB           13
+#define SSP2_CLK_ENB            14
+#define ADC_CLK_ENB             15
+#define GPT1_CLK_ENB            11
+#define RTC_CLK_ENB             17
+#define GPIO1_CLK_ENB           18
+#define DMA_CLK_ENB             19
+#define SMI_CLK_ENB             21
+#define CLCD_CLK_ENB            22
+#define GMAC_CLK_ENB            23
+#define USBD_CLK_ENB            24
+#define USBH0_CLK_ENB           25
+#define USBH1_CLK_ENB           26
+#define SOC_CORE_ID             ((unsigned int *)(MISC_BASE + 0x030))
+#define RAS_CLK_ENB             ((unsigned int *)(MISC_BASE + 0x034))
+#define PERIP1_SOF_RST          ((unsigned int *)(MISC_BASE + 0x038))
+/* PERIP1_SOF_RST register masks */
+#define JPEG_SOF_RST            8
+#define SOC_USER_ID             ((unsigned int *)(MISC_BASE + 0x03C))
+#define RAS_SOF_RST             ((unsigned int *)(MISC_BASE + 0x040))
+#define PRSC1_CLK_CFG           ((unsigned int *)(MISC_BASE + 0x044))
+#define PRSC2_CLK_CFG           ((unsigned int *)(MISC_BASE + 0x048))
+#define PRSC3_CLK_CFG           ((unsigned int *)(MISC_BASE + 0x04C))
+/* gpt synthesizer register masks */
+#define GPT_MSCALE_SHIFT        0
+#define GPT_MSCALE_MASK         0xFFF
+#define GPT_NSCALE_SHIFT        12
+#define GPT_NSCALE_MASK         0xF
+#define AMEM_CLK_CFG            ((unsigned int *)(MISC_BASE + 0x050))
+#define EXPI_CLK_CFG            ((unsigned int *)(MISC_BASE + 0x054))
+#define CLCD_CLK_SYNT           ((unsigned int *)(MISC_BASE + 0x05C))
+#define FIRDA_CLK_SYNT          ((unsigned int *)(MISC_BASE + 0x060))
+#define UART_CLK_SYNT           ((unsigned int *)(MISC_BASE + 0x064))
+#define GMAC_CLK_SYNT           ((unsigned int *)(MISC_BASE + 0x068))
+#define RAS1_CLK_SYNT           ((unsigned int *)(MISC_BASE + 0x06C))
+#define RAS2_CLK_SYNT           ((unsigned int *)(MISC_BASE + 0x070))
+#define RAS3_CLK_SYNT           ((unsigned int *)(MISC_BASE + 0x074))
+#define RAS4_CLK_SYNT           ((unsigned int *)(MISC_BASE + 0x078))
+/* aux clk synthesiser register masks for irda to ras4 */
+#define AUX_EQ_SEL_SHIFT        30
+#define AUX_EQ_SEL_MASK         1
+#define AUX_EQ1_SEL             0
+#define AUX_EQ2_SEL             1
+#define AUX_XSCALE_SHIFT        16
+#define AUX_XSCALE_MASK         0xFFF
+#define AUX_YSCALE_SHIFT        0
+#define AUX_YSCALE_MASK         0xFFF
+#define ICM1_ARB_CFG            ((unsigned int *)(MISC_BASE + 0x07C))
+#define ICM2_ARB_CFG            ((unsigned int *)(MISC_BASE + 0x080))
+#define ICM3_ARB_CFG            ((unsigned int *)(MISC_BASE + 0x084))
+#define ICM4_ARB_CFG            ((unsigned int *)(MISC_BASE + 0x088))
+#define ICM5_ARB_CFG            ((unsigned int *)(MISC_BASE + 0x08C))
+#define ICM6_ARB_CFG            ((unsigned int *)(MISC_BASE + 0x090))
+#define ICM7_ARB_CFG            ((unsigned int *)(MISC_BASE + 0x094))
+#define ICM8_ARB_CFG            ((unsigned int *)(MISC_BASE + 0x098))
+#define ICM9_ARB_CFG            ((unsigned int *)(MISC_BASE + 0x09C))
+#define DMA_CHN_CFG             ((unsigned int *)(MISC_BASE + 0x0A0))
+#define USB2_PHY_CFG            ((unsigned int *)(MISC_BASE + 0x0A4))
+#define GMAC_CFG_CTR            ((unsigned int *)(MISC_BASE + 0x0A8))
+#define EXPI_CFG_CTR            ((unsigned int *)(MISC_BASE + 0x0AC))
+#define PRC1_LOCK_CTR           ((unsigned int *)(MISC_BASE + 0x0C0))
+#define PRC2_LOCK_CTR           ((unsigned int *)(MISC_BASE + 0x0C4))
+#define PRC3_LOCK_CTR           ((unsigned int *)(MISC_BASE + 0x0C8))
+#define PRC4_LOCK_CTR           ((unsigned int *)(MISC_BASE + 0x0CC))
+#define PRC1_IRQ_CTR            ((unsigned int *)(MISC_BASE + 0x0D0))
+#define PRC2_IRQ_CTR            ((unsigned int *)(MISC_BASE + 0x0D4))
+#define PRC3_IRQ_CTR            ((unsigned int *)(MISC_BASE + 0x0D8))
+#define PRC4_IRQ_CTR            ((unsigned int *)(MISC_BASE + 0x0DC))
+#define PWRDOWN_CFG_CTR         ((unsigned int *)(MISC_BASE + 0x0E0))
+#define COMPSSTL_1V8_CFG        ((unsigned int *)(MISC_BASE + 0x0E4))
+#define COMPSSTL_2V5_CFG        ((unsigned int *)(MISC_BASE + 0x0E8))
+#define COMPCOR_3V3_CFG         ((unsigned int *)(MISC_BASE + 0x0EC))
+#define SSTLPAD_CFG_CTR         ((unsigned int *)(MISC_BASE + 0x0F0))
+#define BIST1_CFG_CTR           ((unsigned int *)(MISC_BASE + 0x0F4))
+#define BIST2_CFG_CTR           ((unsigned int *)(MISC_BASE + 0x0F8))
+#define BIST3_CFG_CTR           ((unsigned int *)(MISC_BASE + 0x0FC))
+#define BIST4_CFG_CTR           ((unsigned int *)(MISC_BASE + 0x100))
+#define BIST5_CFG_CTR           ((unsigned int *)(MISC_BASE + 0x104))
+#define BIST1_STS_RES           ((unsigned int *)(MISC_BASE + 0x108))
+#define BIST2_STS_RES           ((unsigned int *)(MISC_BASE + 0x10C))
+#define BIST3_STS_RES           ((unsigned int *)(MISC_BASE + 0x110))
+#define BIST4_STS_RES           ((unsigned int *)(MISC_BASE + 0x114))
+#define BIST5_STS_RES           ((unsigned int *)(MISC_BASE + 0x118))
+#define SYSERR_CFG_CTR          ((unsigned int *)(MISC_BASE + 0x11C))
+#endif /* __MACH_MISC_REGS_H */
diff --git a/arch/arm/mach-spear6xx/include/mach/spear.h b/arch/arm/mach-spear6xx/include/mach/spear.h
new file mode 100644
index 000000000000..a835f5b6b182
--- /dev/null
+++ b/arch/arm/mach-spear6xx/include/mach/spear.h
@@ -0,0 +1,173 @@
+/*
+ * arch/arm/mach-spear6xx/include/mach/spear.h
+ *
+ * SPEAr6xx Machine family specific definition
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Rajeev Kumar<rajeev-dlh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#ifndef __MACH_SPEAR6XX_H
+#define __MACH_SPEAR6XX_H
+#include <mach/hardware.h>
+#include <mach/spear600.h>
+#define SPEAR6XX_ML_SDRAM_BASE          0x00000000
+#define SPEAR6XX_ML_SDRAM_SIZE          0x40000000
+/* ICM1 - Low speed connection */
+#define SPEAR6XX_ICM1_BASE              0xD0000000
+#define SPEAR6XX_ICM1_SIZE              0x08000000
+#define SPEAR6XX_ICM1_UART0_BASE        0xD0000000
+#define VA_SPEAR6XX_ICM1_UART0_BASE     IO_ADDRESS(SPEAR6XX_ICM1_UART0_BASE)
+#define SPEAR6XX_ICM1_UART0_SIZE        0x00080000
+#define SPEAR6XX_ICM1_UART1_BASE        0xD0080000
+#define SPEAR6XX_ICM1_UART1_SIZE        0x00080000
+#define SPEAR6XX_ICM1_SSP0_BASE         0xD0100000
+#define SPEAR6XX_ICM1_SSP0_SIZE         0x00080000
+#define SPEAR6XX_ICM1_SSP1_BASE         0xD0180000
+#define SPEAR6XX_ICM1_SSP1_SIZE         0x00080000
+#define SPEAR6XX_ICM1_I2C_BASE          0xD0200000
+#define SPEAR6XX_ICM1_I2C_SIZE          0x00080000
+#define SPEAR6XX_ICM1_JPEG_BASE         0xD0800000
+#define SPEAR6XX_ICM1_JPEG_SIZE         0x00800000
+#define SPEAR6XX_ICM1_IRDA_BASE         0xD1000000
+#define SPEAR6XX_ICM1_IRDA_SIZE         0x00800000
+#define SPEAR6XX_ICM1_FSMC_BASE         0xD1800000
+#define SPEAR6XX_ICM1_FSMC_SIZE         0x00800000
+#define SPEAR6XX_ICM1_NAND_BASE         0xD2000000
+#define SPEAR6XX_ICM1_NAND_SIZE         0x00800000
+#define SPEAR6XX_ICM1_SRAM_BASE         0xD2800000
+#define SPEAR6XX_ICM1_SRAM_SIZE         0x00800000
+/* ICM2 - Application Subsystem */
+#define SPEAR6XX_ICM2_BASE              0xD8000000
+#define SPEAR6XX_ICM2_SIZE              0x08000000
+#define SPEAR6XX_ICM2_TMR0_BASE         0xD8000000
+#define SPEAR6XX_ICM2_TMR0_SIZE         0x00080000
+#define SPEAR6XX_ICM2_TMR1_BASE         0xD8080000
+#define SPEAR6XX_ICM2_TMR1_SIZE         0x00080000
+#define SPEAR6XX_ICM2_GPIO_BASE         0xD8100000
+#define SPEAR6XX_ICM2_GPIO_SIZE         0x00080000
+#define SPEAR6XX_ICM2_SPI2_BASE         0xD8180000
+#define SPEAR6XX_ICM2_SPI2_SIZE         0x00080000
+#define SPEAR6XX_ICM2_ADC_BASE          0xD8200000
+#define SPEAR6XX_ICM2_ADC_SIZE          0x00080000
+/* ML-1, 2 - Multi Layer CPU Subsystem */
+#define SPEAR6XX_ML_CPU_BASE            0xF0000000
+#define SPEAR6XX_ML_CPU_SIZE            0x08000000
+#define SPEAR6XX_CPU_TMR_BASE           0xF0000000
+#define SPEAR6XX_CPU_TMR_SIZE           0x00100000
+#define SPEAR6XX_CPU_GPIO_BASE          0xF0100000
+#define SPEAR6XX_CPU_GPIO_SIZE          0x00100000
+#define SPEAR6XX_CPU_VIC_SEC_BASE       0xF1000000
+#define VA_SPEAR6XX_CPU_VIC_SEC_BASE    IO_ADDRESS(SPEAR6XX_CPU_VIC_SEC_BASE)
+#define SPEAR6XX_CPU_VIC_SEC_SIZE       0x00100000
+#define SPEAR6XX_CPU_VIC_PRI_BASE       0xF1100000
+#define VA_SPEAR6XX_CPU_VIC_PRI_BASE    IO_ADDRESS(SPEAR6XX_CPU_VIC_PRI_BASE)
+#define SPEAR6XX_CPU_VIC_PRI_SIZE       0x00100000
+/* ICM3 - Basic Subsystem */
+#define SPEAR6XX_ICM3_BASE              0xF8000000
+#define SPEAR6XX_ICM3_SIZE              0x08000000
+#define SPEAR6XX_ICM3_SMEM_BASE         0xF8000000
+#define SPEAR6XX_ICM3_SMEM_SIZE         0x04000000
+#define SPEAR6XX_ICM3_SMI_CTRL_BASE     0xFC000000
+#define SPEAR6XX_ICM3_SMI_CTRL_SIZE     0x00200000
+#define SPEAR6XX_ICM3_CLCD_BASE         0xFC200000
+#define SPEAR6XX_ICM3_CLCD_SIZE         0x00200000
+#define SPEAR6XX_ICM3_DMA_BASE          0xFC400000
+#define SPEAR6XX_ICM3_DMA_SIZE          0x00200000
+#define SPEAR6XX_ICM3_SDRAM_CTRL_BASE   0xFC600000
+#define SPEAR6XX_ICM3_SDRAM_CTRL_SIZE   0x00200000
+#define SPEAR6XX_ICM3_TMR_BASE          0xFC800000
+#define SPEAR6XX_ICM3_TMR_SIZE          0x00080000
+#define SPEAR6XX_ICM3_WDT_BASE          0xFC880000
+#define SPEAR6XX_ICM3_WDT_SIZE          0x00080000
+#define SPEAR6XX_ICM3_RTC_BASE          0xFC900000
+#define SPEAR6XX_ICM3_RTC_SIZE          0x00080000
+#define SPEAR6XX_ICM3_GPIO_BASE         0xFC980000
+#define SPEAR6XX_ICM3_GPIO_SIZE         0x00080000
+#define SPEAR6XX_ICM3_SYS_CTRL_BASE     0xFCA00000
+#define VA_SPEAR6XX_ICM3_SYS_CTRL_BASE  IO_ADDRESS(SPEAR6XX_ICM3_SYS_CTRL_BASE)
+#define SPEAR6XX_ICM3_SYS_CTRL_SIZE     0x00080000
+#define SPEAR6XX_ICM3_MISC_REG_BASE     0xFCA80000
+#define VA_SPEAR6XX_ICM3_MISC_REG_BASE  IO_ADDRESS(SPEAR6XX_ICM3_MISC_REG_BASE)
+#define SPEAR6XX_ICM3_MISC_REG_SIZE     0x00080000
+/* ICM4 - High Speed Connection */
+#define SPEAR6XX_ICM4_BASE              0xE0000000
+#define SPEAR6XX_ICM4_SIZE              0x08000000
+#define SPEAR6XX_ICM4_GMAC_BASE         0xE0800000
+#define SPEAR6XX_ICM4_GMAC_SIZE         0x00800000
+#define SPEAR6XX_ICM4_USBD_FIFO_BASE    0xE1000000
+#define SPEAR6XX_ICM4_USBD_FIFO_SIZE    0x00100000
+#define SPEAR6XX_ICM4_USBD_CSR_BASE     0xE1100000
+#define SPEAR6XX_ICM4_USBD_CSR_SIZE     0x00100000
+#define SPEAR6XX_ICM4_USBD_PLDT_BASE    0xE1200000
+#define SPEAR6XX_ICM4_USBD_PLDT_SIZE    0x00100000
+#define SPEAR6XX_ICM4_USB_EHCI0_BASE    0xE1800000
+#define SPEAR6XX_ICM4_USB_EHCI0_SIZE    0x00100000
+#define SPEAR6XX_ICM4_USB_OHCI0_BASE    0xE1900000
+#define SPEAR6XX_ICM4_USB_OHCI0_SIZE    0x00100000
+#define SPEAR6XX_ICM4_USB_EHCI1_BASE    0xE2000000
+#define SPEAR6XX_ICM4_USB_EHCI1_SIZE    0x00100000
+#define SPEAR6XX_ICM4_USB_OHCI1_BASE    0xE2100000
+#define SPEAR6XX_ICM4_USB_OHCI1_SIZE    0x00100000
+#define SPEAR6XX_ICM4_USB_ARB_BASE      0xE2800000
+#define SPEAR6XX_ICM4_USB_ARB_SIZE      0x00010000
+/* Debug uart for linux, will be used for debug and uncompress messages */
+#define SPEAR_DBG_UART_BASE             SPEAR6XX_ICM1_UART0_BASE
+#define VA_SPEAR_DBG_UART_BASE          VA_SPEAR6XX_ICM1_UART0_BASE
+/* Sysctl base for spear platform */
+#define SPEAR_SYS_CTRL_BASE             SPEAR6XX_ICM3_SYS_CTRL_BASE
+#define VA_SPEAR_SYS_CTRL_BASE          VA_SPEAR6XX_ICM3_SYS_CTRL_BASE
+#endif /* __MACH_SPEAR6XX_H */
diff --git a/arch/arm/mach-spear6xx/include/mach/spear600.h b/arch/arm/mach-spear6xx/include/mach/spear600.h
new file mode 100644
index 000000000000..c068cc50b0fb
--- /dev/null
+++ b/arch/arm/mach-spear6xx/include/mach/spear600.h
@@ -0,0 +1,21 @@
+/*
+ * arch/arm/mach-spear66xx/include/mach/spear600.h
+ *
+ * SPEAr600 Machine specific definition
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#ifdef  CONFIG_MACH_SPEAR600
+#ifndef __MACH_SPEAR600_H
+#define __MACH_SPEAR600_H
+#endif /* __MACH_SPEAR600_H */
+#endif /* CONFIG_MACH_SPEAR600 */
diff --git a/arch/arm/mach-spear6xx/include/mach/system.h b/arch/arm/mach-spear6xx/include/mach/system.h
new file mode 100644
index 000000000000..0b1d2be81cfb
--- /dev/null
+++ b/arch/arm/mach-spear6xx/include/mach/system.h
@@ -0,0 +1,19 @@
+/*
+ * arch/arm/mach-spear6xx/include/mach/system.h
+ *
+ * SPEAr6xx Machine family specific architecture functions
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Rajeev Kumar<rajeev-dlh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#ifndef __MACH_SYSTEM_H
+#define __MACH_SYSTEM_H
+#include <plat/system.h>
+#endif  /* __MACH_SYSTEM_H */
diff --git a/arch/arm/mach-spear6xx/include/mach/timex.h b/arch/arm/mach-spear6xx/include/mach/timex.h
new file mode 100644
index 000000000000..ac1c5b005695
--- /dev/null
+++ b/arch/arm/mach-spear6xx/include/mach/timex.h
@@ -0,0 +1,19 @@
+/*
+ * arch/arm/mach-spear6xx/include/mach/timex.h
+ *
+ * SPEAr6XX machine family specific timex definitions
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Rajeev Kumar<rajeev-dlh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#ifndef __MACH_TIMEX_H
+#define __MACH_TIMEX_H
+#include <plat/timex.h>
+#endif  /* __MACH_TIMEX_H */
diff --git a/arch/arm/mach-spear6xx/include/mach/uncompress.h b/arch/arm/mach-spear6xx/include/mach/uncompress.h
new file mode 100644
index 000000000000..77f0765e21e1
--- /dev/null
+++ b/arch/arm/mach-spear6xx/include/mach/uncompress.h
@@ -0,0 +1,19 @@
+/*
+ * arch/arm/mach-spear6xx/include/mach/uncompress.h
+ *
+ * Serial port stubs for kernel decompress status messages
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Rajeev Kumar<rajeev-dlh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#ifndef __MACH_UNCOMPRESS_H
+#define __MACH_UNCOMPRESS_H
+#include <plat/uncompress.h>
+#endif  /* __MACH_UNCOMPRESS_H */
diff --git a/arch/arm/mach-spear6xx/include/mach/vmalloc.h b/arch/arm/mach-spear6xx/include/mach/vmalloc.h
new file mode 100644
index 000000000000..4a0b56cb2a91
--- /dev/null
+++ b/arch/arm/mach-spear6xx/include/mach/vmalloc.h
@@ -0,0 +1,19 @@
+/*
+ * arch/arm/mach-spear6xx/include/mach/vmalloc.h
+ *
+ * Defining Vmalloc area for SPEAr6xx machine family
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Rajeev Kumar<rajeev-dlh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#ifndef __MACH_VMALLOC_H
+#define __MACH_VMALLOC_H
+#include <plat/vmalloc.h>
+#endif  /* __MACH_VMALLOC_H */
diff --git a/arch/arm/mach-spear6xx/spear600.c b/arch/arm/mach-spear6xx/spear600.c
new file mode 100644
index 000000000000..5c484c433dc1
--- /dev/null
+++ b/arch/arm/mach-spear6xx/spear600.c
@@ -0,0 +1,25 @@
+/*
+ * arch/arm/mach-spear6xx/spear600.c
+ *
+ * SPEAr600 machine source file
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Rajeev Kumar<rajeev-dlh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <linux/ptrace.h>
+#include <asm/irq.h>
+#include <mach/generic.h>
+#include <mach/spear.h>
+/* Add spear600 specific devices here */
+void __init spear600_init(void)
+{
+        /* call spear6xx family common init function */
+        spear6xx_init();
+}
diff --git a/arch/arm/mach-spear6xx/spear600_evb.c b/arch/arm/mach-spear6xx/spear600_evb.c
new file mode 100644
index 000000000000..daff8d04f7b6
--- /dev/null
+++ b/arch/arm/mach-spear6xx/spear600_evb.c
@@ -0,0 +1,51 @@
+/*
+ * arch/arm/mach-spear6xx/spear600_evb.c
+ *
+ * SPEAr600 evaluation board source file
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+#include <mach/generic.h>
+#include <mach/spear.h>
+static struct amba_device *amba_devs[] __initdata = {
+        &gpio_device[0],
+        &gpio_device[1],
+        &gpio_device[2],
+        &uart_device[0],
+        &uart_device[1],
+};
+static struct platform_device *plat_devs[] __initdata = {
+};
+static void __init spear600_evb_init(void)
+{
+        unsigned int i;
+        /* call spear600 machine init function */
+        spear600_init();
+        /* Add Platform Devices */
+        platform_add_devices(plat_devs, ARRAY_SIZE(plat_devs));
+        /* Add Amba Devices */
+        for (i = 0; i < ARRAY_SIZE(amba_devs); i++)
+                amba_device_register(amba_devs[i], &iomem_resource);
+}
+MACHINE_START(SPEAR600, "ST-SPEAR600-EVB")
+        .boot_params    =       0x00000100,
+        .map_io         =       spear6xx_map_io,
+        .init_irq       =       spear6xx_init_irq,
+        .timer          =       &spear_sys_timer,
+        .init_machine   =       spear600_evb_init,
+MACHINE_END
diff --git a/arch/arm/mach-spear6xx/spear6xx.c b/arch/arm/mach-spear6xx/spear6xx.c
new file mode 100644
index 000000000000..b67e571d4bf7
--- /dev/null
+++ b/arch/arm/mach-spear6xx/spear6xx.c
@@ -0,0 +1,158 @@
+/*
+ * arch/arm/mach-spear6xx/spear6xx.c
+ *
+ * SPEAr6XX machines common source file
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Rajeev Kumar<rajeev-dlh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <linux/types.h>
+#include <linux/amba/pl061.h>
+#include <linux/types.h>
+#include <linux/ptrace.h>
+#include <linux/io.h>
+#include <asm/hardware/vic.h>
+#include <asm/irq.h>
+#include <asm/mach/arch.h>
+#include <mach/irqs.h>
+#include <mach/generic.h>
+#include <mach/spear.h>
+/* Add spear6xx machines common devices here */
+/* uart device registeration */
+struct amba_device uart_device[] = {
+        {
+                .dev = {
+                        .init_name = "uart0",
+                },
+                .res = {
+                        .start = SPEAR6XX_ICM1_UART0_BASE,
+                        .end = SPEAR6XX_ICM1_UART0_BASE +
+                                SPEAR6XX_ICM1_UART0_SIZE - 1,
+                        .flags = IORESOURCE_MEM,
+                },
+                .irq = {IRQ_UART_0, NO_IRQ},
+        }, {
+                .dev = {
+                        .init_name = "uart1",
+                },
+                .res = {
+                        .start = SPEAR6XX_ICM1_UART1_BASE,
+                        .end = SPEAR6XX_ICM1_UART1_BASE +
+                                SPEAR6XX_ICM1_UART1_SIZE - 1,
+                        .flags = IORESOURCE_MEM,
+                },
+                .irq = {IRQ_UART_1, NO_IRQ},
+        }
+};
+/* gpio device registeration */
+static struct pl061_platform_data gpio_plat_data[] = {
+        {
+                .gpio_base      = 0,
+                .irq_base       = SPEAR_GPIO0_INT_BASE,
+        }, {
+                .gpio_base      = 8,
+                .irq_base       = SPEAR_GPIO1_INT_BASE,
+        }, {
+                .gpio_base      = 16,
+                .irq_base       = SPEAR_GPIO2_INT_BASE,
+        },
+};
+struct amba_device gpio_device[] = {
+        {
+                .dev = {
+                        .init_name = "gpio0",
+                        .platform_data = &gpio_plat_data[0],
+                },
+                .res = {
+                        .start = SPEAR6XX_CPU_GPIO_BASE,
+                        .end = SPEAR6XX_CPU_GPIO_BASE +
+                                SPEAR6XX_CPU_GPIO_SIZE - 1,
+                        .flags = IORESOURCE_MEM,
+                },
+                .irq = {IRQ_LOCAL_GPIO, NO_IRQ},
+        }, {
+                .dev = {
+                        .init_name = "gpio1",
+                        .platform_data = &gpio_plat_data[1],
+                },
+                .res = {
+                        .start = SPEAR6XX_ICM3_GPIO_BASE,
+                        .end = SPEAR6XX_ICM3_GPIO_BASE +
+                                SPEAR6XX_ICM3_GPIO_SIZE - 1,
+                        .flags = IORESOURCE_MEM,
+                },
+                .irq = {IRQ_BASIC_GPIO, NO_IRQ},
+        }, {
+                .dev = {
+                        .init_name = "gpio2",
+                        .platform_data = &gpio_plat_data[2],
+                },
+                .res = {
+                        .start = SPEAR6XX_ICM2_GPIO_BASE,
+                        .end = SPEAR6XX_ICM2_GPIO_BASE +
+                                SPEAR6XX_ICM2_GPIO_SIZE - 1,
+                        .flags = IORESOURCE_MEM,
+                },
+                .irq = {IRQ_APPL_GPIO, NO_IRQ},
+        }
+};
+/* This will add devices, and do machine specific tasks */
+void __init spear6xx_init(void)
+{
+        /* nothing to do for now */
+}
+/* This will initialize vic */
+void __init spear6xx_init_irq(void)
+{
+        vic_init((void __iomem *)VA_SPEAR6XX_CPU_VIC_PRI_BASE, 0, ~0, 0);
+        vic_init((void __iomem *)VA_SPEAR6XX_CPU_VIC_SEC_BASE, 32, ~0, 0);
+}
+/* Following will create static virtual/physical mappings */
+static struct map_desc spear6xx_io_desc[] __initdata = {
+        {
+                .virtual        = VA_SPEAR6XX_ICM1_UART0_BASE,
+                .pfn            = __phys_to_pfn(SPEAR6XX_ICM1_UART0_BASE),
+                .length         = SPEAR6XX_ICM1_UART0_SIZE,
+                .type           = MT_DEVICE
+        }, {
+                .virtual        = VA_SPEAR6XX_CPU_VIC_PRI_BASE,
+                .pfn            = __phys_to_pfn(SPEAR6XX_CPU_VIC_PRI_BASE),
+                .length         = SPEAR6XX_CPU_VIC_PRI_SIZE,
+                .type           = MT_DEVICE
+        }, {
+                .virtual        = VA_SPEAR6XX_CPU_VIC_SEC_BASE,
+                .pfn            = __phys_to_pfn(SPEAR6XX_CPU_VIC_SEC_BASE),
+                .length         = SPEAR6XX_CPU_VIC_SEC_SIZE,
+                .type           = MT_DEVICE
+        }, {
+                .virtual        = VA_SPEAR6XX_ICM3_SYS_CTRL_BASE,
+                .pfn            = __phys_to_pfn(SPEAR6XX_ICM3_SYS_CTRL_BASE),
+                .length         = SPEAR6XX_ICM3_MISC_REG_BASE,
+                .type           = MT_DEVICE
+        }, {
+                .virtual        = VA_SPEAR6XX_ICM3_MISC_REG_BASE,
+                .pfn            = __phys_to_pfn(SPEAR6XX_ICM3_MISC_REG_BASE),
+                .length         = SPEAR6XX_ICM3_MISC_REG_SIZE,
+                .type           = MT_DEVICE
+        },
+};
+/* This will create static memory mapping for selected devices */
+void __init spear6xx_map_io(void)
+{
+        iotable_init(spear6xx_io_desc, ARRAY_SIZE(spear6xx_io_desc));
+        /* This will initialize clock framework */
+        clk_init();
+}
diff --git a/arch/arm/mach-u300/mmc.c b/arch/arm/mach-u300/mmc.c
index 109f5a6e71c7..783f1236fe1b 100644
--- a/arch/arm/mach-u300/mmc.c
+++ b/arch/arm/mach-u300/mmc.c
@@ -101,11 +101,12 @@ int __devinit mmc_init(struct amba_device *adev)
         * we have a regulator we can control instead.
         */
        /* Nominally 2.85V on our platform */
+        mmci_card->mmc0_plat_data.f_max = 24000000;
        mmci_card->mmc0_plat_data.status = mmc_status;
        mmci_card->mmc0_plat_data.gpio_wp = -1;
        mmci_card->mmc0_plat_data.gpio_cd = -1;
        mmci_card->mmc0_plat_data.capabilities = MMC_CAP_MMC_HIGHSPEED |
-                MMC_CAP_SD_HIGHSPEED | MMC_CAP_4_BIT_DATA;
+                MMC_CAP_SD_HIGHSPEED | MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA;
        mmcsd_device->platform_data = (void *) &mmci_card->mmc0_plat_data;
diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig
index 03625d744857..6625e5bbf4d6 100644
--- a/arch/arm/mach-ux500/Kconfig
+++ b/arch/arm/mach-ux500/Kconfig
@@ -1,15 +1,42 @@
-menu "ST-Ericsson platform type"
+if ARCH_U8500
-        depends on ARCH_U8500
-comment "ST-Ericsson Multicore Mobile Platforms"
+config UX500_SOC_COMMON
+        bool
-config MACH_U8500_MOP
-        bool "U8500 Early Development platform"
        default y
        select ARM_GIC
        select HAS_MTU
+        select NOMADIK_GPIO
+config UX500_SOC_DB8500
+        bool
+config UX500_SOC_DB5500
+        bool
+choice
+        prompt "Ux500 target platform"
+        default MACH_U8500_MOP
+config MACH_U8500_MOP
+        bool "U8500 Development platform"
+        select UX500_SOC_DB8500
        help
          Include support for mop500 development platform
          based on U8500 architecture. The platform is based
          on early drop silicon version of 8500.
-endmenu
+config MACH_U5500
+        bool "U5500 Development platform"
+        select UX500_SOC_DB5500
+        help
+          Include support for the U5500 development platform.
+endchoice
+config UX500_DEBUG_UART
+        int "Ux500 UART to use for low-level debug"
+        default 2
+        help
+          Choose the UART on which kernel low-level debug messages should be
+          output.
+endif
diff --git a/arch/arm/mach-ux500/Makefile b/arch/arm/mach-ux500/Makefile
index 95e6e24c0042..c7bc4199e3a8 100644
--- a/arch/arm/mach-ux500/Makefile
+++ b/arch/arm/mach-ux500/Makefile
@@ -2,7 +2,9 @@
 # Makefile for the linux kernel, U8500 machine.
 #
-obj-y                           := clock.o
+obj-y                           := clock.o cpu.o devices.o
-obj-$(CONFIG_ARCH_U8500)        += cpu-u8500.o
+obj-$(CONFIG_UX500_SOC_DB5500)  += cpu-db5500.o devices-db5500.o
+obj-$(CONFIG_UX500_SOC_DB8500)  += cpu-db8500.o devices-db8500.o
 obj-$(CONFIG_MACH_U8500_MOP)    += board-mop500.o
+obj-$(CONFIG_MACH_U5500)        += board-u5500.o
 obj-$(CONFIG_SMP)               += platsmp.o headsmp.o localtimer.o
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index 803aec1d6728..072196c57263 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -17,37 +17,14 @@
 #include <linux/amba/pl022.h>
 #include <linux/spi/spi.h>
-#include <asm/localtimer.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <plat/mtu.h>
 #include <plat/i2c.h>
 #include <mach/hardware.h>
 #include <mach/setup.h>
+#include <mach/devices.h>
-#define __MEM_4K_RESOURCE(x) \
-        .res = {.start = (x), .end = (x) + SZ_4K - 1, .flags = IORESOURCE_MEM}
-/* These are active devices on this board */
-static struct amba_device uart0_device = {
-        .dev = { .init_name = "uart0" },
-        __MEM_4K_RESOURCE(U8500_UART0_BASE),
-        .irq = {IRQ_UART0, NO_IRQ},
-};
-static struct amba_device uart1_device = {
-        .dev = { .init_name = "uart1" },
-        __MEM_4K_RESOURCE(U8500_UART1_BASE),
-        .irq = {IRQ_UART1, NO_IRQ},
-};
-static struct amba_device uart2_device = {
-        .dev = { .init_name = "uart2" },
-        __MEM_4K_RESOURCE(U8500_UART2_BASE),
-        .irq = {IRQ_UART2, NO_IRQ},
-};
 static void ab4500_spi_cs_control(u32 command)
 {
@@ -93,55 +70,8 @@ static struct pl022_ssp_controller ssp0_platform_data = {
        .num_chipselect = 5,
 };
-static struct amba_device pl022_device = {
-        .dev = {
-                .coherent_dma_mask = ~0,
-                .init_name = "pl022",
-                .platform_data = &ssp0_platform_data,
-        },
-        .res = {
-                .start = U8500_SSP0_BASE,
-                .end   = U8500_SSP0_BASE + SZ_4K - 1,
-                .flags = IORESOURCE_MEM,
-        },
-        .irq = {IRQ_SSP0, NO_IRQ },
-        /* ST-Ericsson modified id */
-        .periphid = SSP_PER_ID,
-};
-static struct amba_device pl031_device = {
-        .dev = {
-                .init_name = "pl031",
-        },
-        .res = {
-                .start = U8500_RTC_BASE,
-                .end = U8500_RTC_BASE + SZ_4K - 1,
-                .flags = IORESOURCE_MEM,
-        },
-        .irq = {IRQ_RTC_RTT, NO_IRQ},
-};
-#define U8500_I2C_RESOURCES(id, size)           \
-static struct resource u8500_i2c_resources_##id[] = {   \
-        [0] = {                                 \
-                .start  = U8500_I2C##id##_BASE, \
-                .end    = U8500_I2C##id##_BASE + size - 1, \
-                .flags  = IORESOURCE_MEM,       \
-        },                                      \
-        [1] = {                                 \
-                .start  = IRQ_I2C##id,          \
-                .end    = IRQ_I2C##id,          \
-                .flags  = IORESOURCE_IRQ        \
-        }                                       \
-}
-U8500_I2C_RESOURCES(0, SZ_4K);
-U8500_I2C_RESOURCES(1, SZ_4K);
-U8500_I2C_RESOURCES(2, SZ_4K);
-U8500_I2C_RESOURCES(3, SZ_4K);
 #define U8500_I2C_CONTROLLER(id, _slsu, _tft, _rft, clk, _sm) \
-static struct nmk_i2c_controller u8500_i2c_##id = { \
+static struct nmk_i2c_controller u8500_i2c##id##_data = { \
        /*                              \
         * slave data setup time, which is      \
         * 250 ns,100ns,10ns which is 14,6,2    \
@@ -169,58 +99,32 @@ U8500_I2C_CONTROLLER(1, 0xe, 1, 1, 100000, I2C_FREQ_MODE_STANDARD);
 U8500_I2C_CONTROLLER(2, 0xe, 1, 1, 100000, I2C_FREQ_MODE_STANDARD);
 U8500_I2C_CONTROLLER(3, 0xe, 1, 1, 100000, I2C_FREQ_MODE_STANDARD);
-#define U8500_I2C_PDEVICE(cid)          \
-static struct platform_device i2c_controller##cid = { \
-        .name = "nmk-i2c",              \
-        .id      = cid,                 \
-        .num_resources = 2,             \
-        .resource = u8500_i2c_resources_##cid,  \
-        .dev = {                        \
-                .platform_data = &u8500_i2c_##cid \
-        }                               \
-}
-U8500_I2C_PDEVICE(0);
-U8500_I2C_PDEVICE(1);
-U8500_I2C_PDEVICE(2);
-U8500_I2C_PDEVICE(3);
 static struct amba_device *amba_devs[] __initdata = {
-        &uart0_device,
+        &ux500_uart0_device,
-        &uart1_device,
+        &ux500_uart1_device,
-        &uart2_device,
+        &ux500_uart2_device,
-        &pl022_device,
+        &u8500_ssp0_device,
-        &pl031_device,
 };
 /* add any platform devices here - TODO */
 static struct platform_device *platform_devs[] __initdata = {
-        &i2c_controller0,
+        &u8500_i2c0_device,
-        &i2c_controller1,
+        &ux500_i2c1_device,
-        &i2c_controller2,
+        &ux500_i2c2_device,
-        &i2c_controller3,
+        &ux500_i2c3_device,
-};
-static void __init u8500_timer_init(void)
-{
-#ifdef CONFIG_LOCAL_TIMERS
-        /* Setup the local timer base */
-        twd_base = __io_address(U8500_TWD_BASE);
-#endif
-        /* Setup the MTU base */
-        mtu_base = __io_address(U8500_MTU0_BASE);
-        nmdk_timer_init();
-}
-static struct sys_timer u8500_timer = {
-        .init   = u8500_timer_init,
 };
 static void __init u8500_init_machine(void)
 {
        int i;
+        u8500_i2c0_device.dev.platform_data = &u8500_i2c0_data;
+        ux500_i2c1_device.dev.platform_data = &u8500_i2c1_data;
+        ux500_i2c2_device.dev.platform_data = &u8500_i2c2_data;
+        ux500_i2c3_device.dev.platform_data = &u8500_i2c3_data;
+        u8500_ssp0_device.dev.platform_data = &ssp0_platform_data;
        /* Register the active AMBA devices on this board */
        for (i = 0; i < ARRAY_SIZE(amba_devs); i++)
                amba_device_register(amba_devs[i], &iomem_resource);
@@ -239,8 +143,8 @@ MACHINE_START(U8500, "ST-Ericsson MOP500 platform")
        .io_pg_offst    = (IO_ADDRESS(U8500_UART2_BASE) >> 18) & 0xfffc,
        .boot_params    = 0x100,
        .map_io         = u8500_map_io,
-        .init_irq       = u8500_init_irq,
+        .init_irq       = ux500_init_irq,
        /* we re-use nomadik timer here */
-        .timer          = &u8500_timer,
+        .timer          = &ux500_timer,
        .init_machine   = u8500_init_machine,
 MACHINE_END
diff --git a/arch/arm/mach-ux500/board-u5500.c b/arch/arm/mach-ux500/board-u5500.c
new file mode 100644
index 000000000000..4430e69cf538
--- /dev/null
+++ b/arch/arm/mach-ux500/board-u5500.c
@@ -0,0 +1,41 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
+ * License terms: GNU General Public License (GPL) version 2
+ */
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/amba/bus.h>
+#include <linux/gpio.h>
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+#include <mach/hardware.h>
+#include <mach/devices.h>
+#include <mach/setup.h>
+static struct amba_device *amba_board_devs[] __initdata = {
+        &ux500_uart0_device,
+        &ux500_uart1_device,
+        &ux500_uart2_device,
+};
+static void __init u5500_init_machine(void)
+{
+        u5500_init_devices();
+        amba_add_devices(amba_board_devs, ARRAY_SIZE(amba_board_devs));
+}
+MACHINE_START(U8500, "ST-Ericsson U5500 Platform")
+        .phys_io        = UX500_UART0_BASE,
+        .io_pg_offst    = (IO_ADDRESS(UX500_UART0_BASE) >> 18) & 0xfffc,
+        .boot_params    = 0x00000100,
+        .map_io         = u5500_map_io,
+        .init_irq       = ux500_init_irq,
+        .timer          = &ux500_timer,
+        .init_machine   = u5500_init_machine,
+MACHINE_END
diff --git a/arch/arm/mach-ux500/clock.c b/arch/arm/mach-ux500/clock.c
index 8359a73d0041..1b2c9890e8b4 100644
--- a/arch/arm/mach-ux500/clock.c
+++ b/arch/arm/mach-ux500/clock.c
@@ -1,6 +1,6 @@
 /*
 *  Copyright (C) 2009 ST-Ericsson
- *      heavily based on realview platform
+ *  Copyright (C) 2009 STMicroelectronics
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
@@ -12,33 +12,130 @@
 #include <linux/errno.h>
 #include <linux/err.h>
 #include <linux/clk.h>
-#include <linux/mutex.h>
+#include <linux/io.h>
 #include <asm/clkdev.h>
-/* currently the clk structure
+#include <mach/hardware.h>
- * just supports rate. This would
+#include "clock.h"
- * be extended as and when new devices are
- * added - TODO
+#define PRCC_PCKEN              0x00
- */
+#define PRCC_PCKDIS             0x04
-struct clk {
+#define PRCC_KCKEN              0x08
-        unsigned long           rate;
+#define PRCC_KCKDIS             0x0C
-};
+#define PRCM_YYCLKEN0_MGT_SET   0x510
+#define PRCM_YYCLKEN1_MGT_SET   0x514
+#define PRCM_YYCLKEN0_MGT_CLR   0x518
+#define PRCM_YYCLKEN1_MGT_CLR   0x51C
+#define PRCM_YYCLKEN0_MGT_VAL   0x520
+#define PRCM_YYCLKEN1_MGT_VAL   0x524
+#define PRCM_SVAMMDSPCLK_MGT    0x008
+#define PRCM_SIAMMDSPCLK_MGT    0x00C
+#define PRCM_SGACLK_MGT         0x014
+#define PRCM_UARTCLK_MGT        0x018
+#define PRCM_MSP02CLK_MGT       0x01C
+#define PRCM_MSP1CLK_MGT        0x288
+#define PRCM_I2CCLK_MGT         0x020
+#define PRCM_SDMMCCLK_MGT       0x024
+#define PRCM_SLIMCLK_MGT        0x028
+#define PRCM_PER1CLK_MGT        0x02C
+#define PRCM_PER2CLK_MGT        0x030
+#define PRCM_PER3CLK_MGT        0x034
+#define PRCM_PER5CLK_MGT        0x038
+#define PRCM_PER6CLK_MGT        0x03C
+#define PRCM_PER7CLK_MGT        0x040
+#define PRCM_LCDCLK_MGT         0x044
+#define PRCM_BMLCLK_MGT         0x04C
+#define PRCM_HSITXCLK_MGT       0x050
+#define PRCM_HSIRXCLK_MGT       0x054
+#define PRCM_HDMICLK_MGT        0x058
+#define PRCM_APEATCLK_MGT       0x05C
+#define PRCM_APETRACECLK_MGT    0x060
+#define PRCM_MCDECLK_MGT        0x064
+#define PRCM_IPI2CCLK_MGT       0x068
+#define PRCM_DSIALTCLK_MGT      0x06C
+#define PRCM_DMACLK_MGT         0x074
+#define PRCM_B2R2CLK_MGT        0x078
+#define PRCM_TVCLK_MGT          0x07C
+#define PRCM_UNIPROCLK_MGT      0x278
+#define PRCM_SSPCLK_MGT         0x280
+#define PRCM_RNGCLK_MGT         0x284
+#define PRCM_UICCCLK_MGT        0x27C
+#define PRCM_MGT_ENABLE         (1 << 8)
+static DEFINE_SPINLOCK(clocks_lock);
+static void __clk_enable(struct clk *clk)
+{
+        if (clk->enabled++ == 0) {
+                if (clk->parent_cluster)
+                        __clk_enable(clk->parent_cluster);
+                if (clk->parent_periph)
+                        __clk_enable(clk->parent_periph);
+                if (clk->ops && clk->ops->enable)
+                        clk->ops->enable(clk);
+        }
+}
 int clk_enable(struct clk *clk)
 {
+        unsigned long flags;
+        spin_lock_irqsave(&clocks_lock, flags);
+        __clk_enable(clk);
+        spin_unlock_irqrestore(&clocks_lock, flags);
        return 0;
 }
 EXPORT_SYMBOL(clk_enable);
+static void __clk_disable(struct clk *clk)
+{
+        if (--clk->enabled == 0) {
+                if (clk->ops && clk->ops->disable)
+                        clk->ops->disable(clk);
+                if (clk->parent_periph)
+                        __clk_disable(clk->parent_periph);
+                if (clk->parent_cluster)
+                        __clk_disable(clk->parent_cluster);
+        }
+}
 void clk_disable(struct clk *clk)
 {
+        unsigned long flags;
+        WARN_ON(!clk->enabled);
+        spin_lock_irqsave(&clocks_lock, flags);
+        __clk_disable(clk);
+        spin_unlock_irqrestore(&clocks_lock, flags);
 }
 EXPORT_SYMBOL(clk_disable);
 unsigned long clk_get_rate(struct clk *clk)
 {
-        return clk->rate;
+        unsigned long rate;
+        if (clk->ops && clk->ops->get_rate)
+                return clk->ops->get_rate(clk);
+        rate = clk->rate;
+        if (!rate) {
+                if (clk->parent_periph)
+                        rate = clk_get_rate(clk->parent_periph);
+                else if (clk->parent_cluster)
+                        rate = clk_get_rate(clk->parent_cluster);
+        }
+        return rate;
 }
 EXPORT_SYMBOL(clk_get_rate);
@@ -56,37 +153,373 @@ int clk_set_rate(struct clk *clk, unsigned long rate)
 }
 EXPORT_SYMBOL(clk_set_rate);
-/* ssp clock */
+static void clk_prcmu_enable(struct clk *clk)
-static struct clk ssp_clk = {
+{
-        .rate = 48000000,
+        void __iomem *cg_set_reg = __io_address(U8500_PRCMU_BASE)
+                                   + PRCM_YYCLKEN0_MGT_SET + clk->prcmu_cg_off;
+        writel(1 << clk->prcmu_cg_bit, cg_set_reg);
+}
+static void clk_prcmu_disable(struct clk *clk)
+{
+        void __iomem *cg_clr_reg = __io_address(U8500_PRCMU_BASE)
+                                   + PRCM_YYCLKEN0_MGT_CLR + clk->prcmu_cg_off;
+        writel(1 << clk->prcmu_cg_bit, cg_clr_reg);
+}
+/* ED doesn't have the combined set/clr registers */
+static void clk_prcmu_ed_enable(struct clk *clk)
+{
+        void __iomem *addr = __io_address(U8500_PRCMU_BASE)
+                             + clk->prcmu_cg_mgt;
+        writel(readl(addr) | PRCM_MGT_ENABLE, addr);
+}
+static void clk_prcmu_ed_disable(struct clk *clk)
+{
+        void __iomem *addr = __io_address(U8500_PRCMU_BASE)
+                             + clk->prcmu_cg_mgt;
+        writel(readl(addr) & ~PRCM_MGT_ENABLE, addr);
+}
+static struct clkops clk_prcmu_ops = {
+        .enable = clk_prcmu_enable,
+        .disable = clk_prcmu_disable,
 };
-/* fixed clock */
+static unsigned int clkrst_base[] = {
-static struct clk f38_clk = {
+        [1] = U8500_CLKRST1_BASE,
-        .rate = 38400000,
+        [2] = U8500_CLKRST2_BASE,
+        [3] = U8500_CLKRST3_BASE,
+        [5] = U8500_CLKRST5_BASE,
+        [6] = U8500_CLKRST6_BASE,
+        [7] = U8500_CLKRST7_BASE_ED,
 };
-static struct clk_lookup lookups[] = {
+static void clk_prcc_enable(struct clk *clk)
-        {
+{
-                /* UART0 */
+        void __iomem *addr = __io_address(clkrst_base[clk->cluster]);
-                .dev_id         = "uart0",
-                .clk            = &f38_clk,
+        if (clk->prcc_kernel != -1)
-        }, {    /* UART1 */
+                writel(1 << clk->prcc_kernel, addr + PRCC_KCKEN);
-                .dev_id         = "uart1",
-                .clk            = &f38_clk,
+        if (clk->prcc_bus != -1)
-        }, {    /* UART2 */
+                writel(1 << clk->prcc_bus, addr + PRCC_PCKEN);
-                .dev_id         = "uart2",
+}
-                .clk            = &f38_clk,
-        }, {    /* SSP */
+static void clk_prcc_disable(struct clk *clk)
-                .dev_id         = "pl022",
+{
-                .clk            = &ssp_clk,
+        void __iomem *addr = __io_address(clkrst_base[clk->cluster]);
-        }
+        if (clk->prcc_bus != -1)
+                writel(1 << clk->prcc_bus, addr + PRCC_PCKDIS);
+        if (clk->prcc_kernel != -1)
+                writel(1 << clk->prcc_kernel, addr + PRCC_KCKDIS);
+}
+static struct clkops clk_prcc_ops = {
+        .enable = clk_prcc_enable,
+        .disable = clk_prcc_disable,
+};
+static struct clk clk_32khz = {
+        .rate = 32000,
+};
+/*
+ * PRCMU level clock gating
+ */
+/* Bank 0 */
+static DEFINE_PRCMU_CLK(svaclk,         0x0, 2, SVAMMDSPCLK);
+static DEFINE_PRCMU_CLK(siaclk,         0x0, 3, SIAMMDSPCLK);
+static DEFINE_PRCMU_CLK(sgaclk,         0x0, 4, SGACLK);
+static DEFINE_PRCMU_CLK_RATE(uartclk,   0x0, 5, UARTCLK, 38400000);
+static DEFINE_PRCMU_CLK(msp02clk,       0x0, 6, MSP02CLK);
+static DEFINE_PRCMU_CLK(msp1clk,        0x0, 7, MSP1CLK); /* v1 */
+static DEFINE_PRCMU_CLK_RATE(i2cclk,    0x0, 8, I2CCLK, 48000000);
+static DEFINE_PRCMU_CLK_RATE(sdmmcclk,  0x0, 9, SDMMCCLK, 50000000);
+static DEFINE_PRCMU_CLK(slimclk,        0x0, 10, SLIMCLK);
+static DEFINE_PRCMU_CLK(per1clk,        0x0, 11, PER1CLK);
+static DEFINE_PRCMU_CLK(per2clk,        0x0, 12, PER2CLK);
+static DEFINE_PRCMU_CLK(per3clk,        0x0, 13, PER3CLK);
+static DEFINE_PRCMU_CLK(per5clk,        0x0, 14, PER5CLK);
+static DEFINE_PRCMU_CLK_RATE(per6clk,   0x0, 15, PER6CLK, 133330000);
+static DEFINE_PRCMU_CLK_RATE(per7clk,   0x0, 16, PER7CLK, 100000000);
+static DEFINE_PRCMU_CLK(lcdclk,         0x0, 17, LCDCLK);
+static DEFINE_PRCMU_CLK(bmlclk,         0x0, 18, BMLCLK);
+static DEFINE_PRCMU_CLK(hsitxclk,       0x0, 19, HSITXCLK);
+static DEFINE_PRCMU_CLK(hsirxclk,       0x0, 20, HSIRXCLK);
+static DEFINE_PRCMU_CLK(hdmiclk,        0x0, 21, HDMICLK);
+static DEFINE_PRCMU_CLK(apeatclk,       0x0, 22, APEATCLK);
+static DEFINE_PRCMU_CLK(apetraceclk,    0x0, 23, APETRACECLK);
+static DEFINE_PRCMU_CLK(mcdeclk,        0x0, 24, MCDECLK);
+static DEFINE_PRCMU_CLK(ipi2clk,        0x0, 25, IPI2CCLK);
+static DEFINE_PRCMU_CLK(dsialtclk,      0x0, 26, DSIALTCLK); /* v1 */
+static DEFINE_PRCMU_CLK(dmaclk,         0x0, 27, DMACLK);
+static DEFINE_PRCMU_CLK(b2r2clk,        0x0, 28, B2R2CLK);
+static DEFINE_PRCMU_CLK(tvclk,          0x0, 29, TVCLK);
+static DEFINE_PRCMU_CLK(uniproclk,      0x0, 30, UNIPROCLK); /* v1 */
+static DEFINE_PRCMU_CLK_RATE(sspclk,    0x0, 31, SSPCLK, 48000000); /* v1 */
+/* Bank 1 */
+static DEFINE_PRCMU_CLK(rngclk,         0x4, 0, RNGCLK); /* v1 */
+static DEFINE_PRCMU_CLK(uiccclk,        0x4, 1, UICCCLK); /* v1 */
+/*
+ * PRCC level clock gating
+ * Format: per#, clk, PCKEN bit, KCKEN bit, parent
+ */
+/* Peripheral Cluster #1 */
+static DEFINE_PRCC_CLK(1, i2c4,         10, 9, &clk_i2cclk);
+static DEFINE_PRCC_CLK(1, gpio0,        9, -1, NULL);
+static DEFINE_PRCC_CLK(1, slimbus0,     8,  8, &clk_slimclk);
+static DEFINE_PRCC_CLK(1, spi3_ed,      7,  7, NULL);
+static DEFINE_PRCC_CLK(1, spi3_v1,      7, -1, NULL);
+static DEFINE_PRCC_CLK(1, i2c2,         6,  6, &clk_i2cclk);
+static DEFINE_PRCC_CLK(1, sdi0,         5,  5, &clk_sdmmcclk);
+static DEFINE_PRCC_CLK(1, msp1_ed,      4,  4, &clk_msp02clk);
+static DEFINE_PRCC_CLK(1, msp1_v1,      4,  4, &clk_msp1clk);
+static DEFINE_PRCC_CLK(1, msp0,         3,  3, &clk_msp02clk);
+static DEFINE_PRCC_CLK(1, i2c1,         2,  2, &clk_i2cclk);
+static DEFINE_PRCC_CLK(1, uart1,        1,  1, &clk_uartclk);
+static DEFINE_PRCC_CLK(1, uart0,        0,  0, &clk_uartclk);
+/* Peripheral Cluster #2 */
+static DEFINE_PRCC_CLK(2, gpio1_ed,     12, -1, NULL);
+static DEFINE_PRCC_CLK(2, ssitx_ed,     11, -1, NULL);
+static DEFINE_PRCC_CLK(2, ssirx_ed,     10, -1, NULL);
+static DEFINE_PRCC_CLK(2, spi0_ed,       9, -1, NULL);
+static DEFINE_PRCC_CLK(2, sdi3_ed,       8,  6, &clk_sdmmcclk);
+static DEFINE_PRCC_CLK(2, sdi1_ed,       7,  5, &clk_sdmmcclk);
+static DEFINE_PRCC_CLK(2, msp2_ed,       6,  4, &clk_msp02clk);
+static DEFINE_PRCC_CLK(2, sdi4_ed,       4,  2, &clk_sdmmcclk);
+static DEFINE_PRCC_CLK(2, pwl_ed,        3,  1, NULL);
+static DEFINE_PRCC_CLK(2, spi1_ed,       2, -1, NULL);
+static DEFINE_PRCC_CLK(2, spi2_ed,       1, -1, NULL);
+static DEFINE_PRCC_CLK(2, i2c3_ed,       0,  0, &clk_i2cclk);
+static DEFINE_PRCC_CLK(2, gpio1_v1,     11, -1, NULL);
+static DEFINE_PRCC_CLK(2, ssitx_v1,     10,  7, NULL);
+static DEFINE_PRCC_CLK(2, ssirx_v1,      9,  6, NULL);
+static DEFINE_PRCC_CLK(2, spi0_v1,       8, -1, NULL);
+static DEFINE_PRCC_CLK(2, sdi3_v1,       7,  5, &clk_sdmmcclk);
+static DEFINE_PRCC_CLK(2, sdi1_v1,       6,  4, &clk_sdmmcclk);
+static DEFINE_PRCC_CLK(2, msp2_v1,       5,  3, &clk_msp02clk);
+static DEFINE_PRCC_CLK(2, sdi4_v1,       4,  2, &clk_sdmmcclk);
+static DEFINE_PRCC_CLK(2, pwl_v1,        3,  1, NULL);
+static DEFINE_PRCC_CLK(2, spi1_v1,       2, -1, NULL);
+static DEFINE_PRCC_CLK(2, spi2_v1,       1, -1, NULL);
+static DEFINE_PRCC_CLK(2, i2c3_v1,       0,  0, &clk_i2cclk);
+/* Peripheral Cluster #3 */
+static DEFINE_PRCC_CLK(3, gpio2,        8, -1, NULL);
+static DEFINE_PRCC_CLK(3, sdi5,         7,  7, &clk_sdmmcclk);
+static DEFINE_PRCC_CLK(3, uart2,        6,  6, &clk_uartclk);
+static DEFINE_PRCC_CLK(3, ske,          5,  5, &clk_32khz);
+static DEFINE_PRCC_CLK(3, sdi2,         4,  4, &clk_sdmmcclk);
+static DEFINE_PRCC_CLK(3, i2c0,         3,  3, &clk_i2cclk);
+static DEFINE_PRCC_CLK(3, ssp1_ed,      2,  2, &clk_i2cclk);
+static DEFINE_PRCC_CLK(3, ssp0_ed,      1,  1, &clk_i2cclk);
+static DEFINE_PRCC_CLK(3, ssp1_v1,      2,  2, &clk_sspclk);
+static DEFINE_PRCC_CLK(3, ssp0_v1,      1,  1, &clk_sspclk);
+static DEFINE_PRCC_CLK(3, fsmc,         0, -1, NULL);
+/* Peripheral Cluster #4 is in the always on domain */
+/* Peripheral Cluster #5 */
+static DEFINE_PRCC_CLK(5, gpio3,        1, -1, NULL);
+static DEFINE_PRCC_CLK(5, usb_ed,       0,  0, &clk_i2cclk);
+static DEFINE_PRCC_CLK(5, usb_v1,       0,  0, NULL);
+/* Peripheral Cluster #6 */
+static DEFINE_PRCC_CLK(6, mtu1_v1,      8, -1, NULL);
+static DEFINE_PRCC_CLK(6, mtu0_v1,      7, -1, NULL);
+static DEFINE_PRCC_CLK(6, cfgreg_v1,    6,  6, NULL);
+static DEFINE_PRCC_CLK(6, dmc_ed,       6,  6, NULL);
+static DEFINE_PRCC_CLK(6, hash1,        5, -1, NULL);
+static DEFINE_PRCC_CLK(6, unipro_v1,    4,  1, &clk_uniproclk);
+static DEFINE_PRCC_CLK(6, cryp1_ed,     4, -1, NULL);
+static DEFINE_PRCC_CLK(6, pka,          3, -1, NULL);
+static DEFINE_PRCC_CLK(6, hash0,        2, -1, NULL);
+static DEFINE_PRCC_CLK(6, cryp0,        1, -1, NULL);
+static DEFINE_PRCC_CLK(6, rng_ed,       0,  0, &clk_i2cclk);
+static DEFINE_PRCC_CLK(6, rng_v1,       0,  0, &clk_rngclk);
+/* Peripheral Cluster #7 */
+static DEFINE_PRCC_CLK(7, tzpc0_ed,     4, -1, NULL);
+static DEFINE_PRCC_CLK(7, mtu1_ed,      3, -1, NULL);
+static DEFINE_PRCC_CLK(7, mtu0_ed,      2, -1, NULL);
+static DEFINE_PRCC_CLK(7, wdg_ed,       1, -1, NULL);
+static DEFINE_PRCC_CLK(7, cfgreg_ed,    0, -1, NULL);
+static struct clk_lookup u8500_common_clks[] = {
+        /* Peripheral Cluster #1 */
+        CLK(gpio0,      "gpio.0",       NULL),
+        CLK(gpio0,      "gpio.1",       NULL),
+        CLK(slimbus0,   "slimbus0",     NULL),
+        CLK(i2c2,       "nmk-i2c.2",    NULL),
+        CLK(sdi0,       "sdi0",         NULL),
+        CLK(msp0,       "msp0",         NULL),
+        CLK(i2c1,       "nmk-i2c.1",    NULL),
+        CLK(uart1,      "uart1",        NULL),
+        CLK(uart0,      "uart0",        NULL),
+        /* Peripheral Cluster #3 */
+        CLK(gpio2,      "gpio.2",       NULL),
+        CLK(gpio2,      "gpio.3",       NULL),
+        CLK(gpio2,      "gpio.4",       NULL),
+        CLK(gpio2,      "gpio.5",       NULL),
+        CLK(sdi5,       "sdi5",         NULL),
+        CLK(uart2,      "uart2",        NULL),
+        CLK(ske,        "ske",          NULL),
+        CLK(sdi2,       "sdi2",         NULL),
+        CLK(i2c0,       "nmk-i2c.0",    NULL),
+        CLK(fsmc,       "fsmc",         NULL),
+        /* Peripheral Cluster #5 */
+        CLK(gpio3,      "gpio.8",       NULL),
+        /* Peripheral Cluster #6 */
+        CLK(hash1,      "hash1",        NULL),
+        CLK(pka,        "pka",          NULL),
+        CLK(hash0,      "hash0",        NULL),
+        CLK(cryp0,      "cryp0",        NULL),
+        /* PRCMU level clock gating */
+        /* Bank 0 */
+        CLK(svaclk,     "sva",          NULL),
+        CLK(siaclk,     "sia",          NULL),
+        CLK(sgaclk,     "sga",          NULL),
+        CLK(slimclk,    "slim",         NULL),
+        CLK(lcdclk,     "lcd",          NULL),
+        CLK(bmlclk,     "bml",          NULL),
+        CLK(hsitxclk,   "stm-hsi.0",    NULL),
+        CLK(hsirxclk,   "stm-hsi.1",    NULL),
+        CLK(hdmiclk,    "hdmi",         NULL),
+        CLK(apeatclk,   "apeat",        NULL),
+        CLK(apetraceclk,        "apetrace",     NULL),
+        CLK(mcdeclk,    "mcde",         NULL),
+        CLK(ipi2clk,    "ipi2",         NULL),
+        CLK(dmaclk,     "dma40",        NULL),
+        CLK(b2r2clk,    "b2r2",         NULL),
+        CLK(tvclk,      "tv",           NULL),
+};
+static struct clk_lookup u8500_ed_clks[] = {
+        /* Peripheral Cluster #1 */
+        CLK(spi3_ed,    "spi3",         NULL),
+        CLK(msp1_ed,    "msp1",         NULL),
+        /* Peripheral Cluster #2 */
+        CLK(gpio1_ed,   "gpio.6",       NULL),
+        CLK(gpio1_ed,   "gpio.7",       NULL),
+        CLK(ssitx_ed,   "ssitx",        NULL),
+        CLK(ssirx_ed,   "ssirx",        NULL),
+        CLK(spi0_ed,    "spi0",         NULL),
+        CLK(sdi3_ed,    "sdi3",         NULL),
+        CLK(sdi1_ed,    "sdi1",         NULL),
+        CLK(msp2_ed,    "msp2",         NULL),
+        CLK(sdi4_ed,    "sdi4",         NULL),
+        CLK(pwl_ed,     "pwl",          NULL),
+        CLK(spi1_ed,    "spi1",         NULL),
+        CLK(spi2_ed,    "spi2",         NULL),
+        CLK(i2c3_ed,    "nmk-i2c.3",    NULL),
+        /* Peripheral Cluster #3 */
+        CLK(ssp1_ed,    "ssp1",         NULL),
+        CLK(ssp0_ed,    "ssp0",         NULL),
+        /* Peripheral Cluster #5 */
+        CLK(usb_ed,     "musb_hdrc.0",  "usb"),
+        /* Peripheral Cluster #6 */
+        CLK(dmc_ed,     "dmc",          NULL),
+        CLK(cryp1_ed,   "cryp1",        NULL),
+        CLK(rng_ed,     "rng",          NULL),
+        /* Peripheral Cluster #7 */
+        CLK(tzpc0_ed,   "tzpc0",        NULL),
+        CLK(mtu1_ed,    "mtu1",         NULL),
+        CLK(mtu0_ed,    "mtu0",         NULL),
+        CLK(wdg_ed,     "wdg",          NULL),
+        CLK(cfgreg_ed,  "cfgreg",       NULL),
+};
+static struct clk_lookup u8500_v1_clks[] = {
+        /* Peripheral Cluster #1 */
+        CLK(i2c4,       "nmk-i2c.4",    NULL),
+        CLK(spi3_v1,    "spi3",         NULL),
+        CLK(msp1_v1,    "msp1",         NULL),
+        /* Peripheral Cluster #2 */
+        CLK(gpio1_v1,   "gpio.6",       NULL),
+        CLK(gpio1_v1,   "gpio.7",       NULL),
+        CLK(ssitx_v1,   "ssitx",        NULL),
+        CLK(ssirx_v1,   "ssirx",        NULL),
+        CLK(spi0_v1,    "spi0",         NULL),
+        CLK(sdi3_v1,    "sdi3",         NULL),
+        CLK(sdi1_v1,    "sdi1",         NULL),
+        CLK(msp2_v1,    "msp2",         NULL),
+        CLK(sdi4_v1,    "sdi4",         NULL),
+        CLK(pwl_v1,     "pwl",          NULL),
+        CLK(spi1_v1,    "spi1",         NULL),
+        CLK(spi2_v1,    "spi2",         NULL),
+        CLK(i2c3_v1,    "nmk-i2c.3",    NULL),
+        /* Peripheral Cluster #3 */
+        CLK(ssp1_v1,    "ssp1",         NULL),
+        CLK(ssp0_v1,    "ssp0",         NULL),
+        /* Peripheral Cluster #5 */
+        CLK(usb_v1,     "musb_hdrc.0",  "usb"),
+        /* Peripheral Cluster #6 */
+        CLK(mtu1_v1,    "mtu1",         NULL),
+        CLK(mtu0_v1,    "mtu0",         NULL),
+        CLK(cfgreg_v1,  "cfgreg",       NULL),
+        CLK(hash1,      "hash1",        NULL),
+        CLK(unipro_v1,  "unipro",       NULL),
+        CLK(rng_v1,     "rng",          NULL),
+        /* PRCMU level clock gating */
+        /* Bank 0 */
+        CLK(uniproclk,  "uniproclk",    NULL),
+        CLK(dsialtclk,  "dsialt",       NULL),
+        /* Bank 1 */
+        CLK(rngclk,     "rng",          NULL),
+        CLK(uiccclk,    "uicc",         NULL),
 };
 static int __init clk_init(void)
 {
-        /* register the clock lookups */
+        if (cpu_is_u8500ed()) {
-        clkdev_add_table(lookups, ARRAY_SIZE(lookups));
+                clk_prcmu_ops.enable = clk_prcmu_ed_enable;
+                clk_prcmu_ops.disable = clk_prcmu_ed_disable;
+        } else if (cpu_is_u5500()) {
+                /* Clock tree for U5500 not implemented yet */
+                clk_prcc_ops.enable = clk_prcc_ops.disable = NULL;
+                clk_prcmu_ops.enable = clk_prcmu_ops.disable = NULL;
+        }
+        clkdev_add_table(u8500_common_clks, ARRAY_SIZE(u8500_common_clks));
+        if (cpu_is_u8500ed())
+                clkdev_add_table(u8500_ed_clks, ARRAY_SIZE(u8500_ed_clks));
+        else
+                clkdev_add_table(u8500_v1_clks, ARRAY_SIZE(u8500_v1_clks));
        return 0;
 }
 arch_initcall(clk_init);
diff --git a/arch/arm/mach-ux500/clock.h b/arch/arm/mach-ux500/clock.h
new file mode 100644
index 000000000000..e4f99b65026f
--- /dev/null
+++ b/arch/arm/mach-ux500/clock.h
@@ -0,0 +1,125 @@
+/*
+ *  Copyright (C) 2010 ST-Ericsson
+ *  Copyright (C) 2009 STMicroelectronics
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/**
+ * struct clkops - ux500 clock operations
+ * @enable:     function to enable the clock
+ * @disable:    function to disable the clock
+ * @get_rate:   function to get the current clock rate
+ *
+ * This structure contains function pointers to functions that will be used to
+ * control the clock.  All of these functions are optional.  If get_rate is
+ * NULL, the rate in the struct clk will be used.
+ */
+struct clkops {
+        void (*enable) (struct clk *);
+        void (*disable) (struct clk *);
+        unsigned long (*get_rate) (struct clk *);
+};
+/**
+ * struct clk - ux500 clock structure
+ * @ops:                pointer to clkops struct used to control this clock
+ * @name:               name, for debugging
+ * @enabled:            refcount. positive if enabled, zero if disabled
+ * @rate:               fixed rate for clocks which don't implement
+ *                      ops->getrate
+ * @prcmu_cg_off:       address offset of the combined enable/disable register
+ *                      (used on u8500v1)
+ * @prcmu_cg_bit:       bit in the combined enable/disable register (used on
+ *                      u8500v1)
+ * @prcmu_cg_mgt:       address of the enable/disable register (used on
+ *                      u8500ed)
+ * @cluster:            peripheral cluster number
+ * @prcc_bus:           bit for the bus clock in the peripheral's CLKRST
+ * @prcc_kernel:        bit for the kernel clock in the peripheral's CLKRST.
+ *                      -1 if no kernel clock exists.
+ * @parent_cluster:     pointer to parent's cluster clk struct
+ * @parent_periph:      pointer to parent's peripheral clk struct
+ *
+ * Peripherals are organised into clusters, and each cluster has an associated
+ * bus clock.  Some peripherals also have a parent peripheral clock.
+ *
+ * In order to enable a clock for a peripheral, we need to enable:
+ *      (1) the parent cluster (bus) clock at the PRCMU level
+ *      (2) the parent peripheral clock (if any) at the PRCMU level
+ *      (3) the peripheral's bus & kernel clock at the PRCC level
+ *
+ * (1) and (2) are handled by defining clk structs (DEFINE_PRCMU_CLK) for each
+ * of the cluster and peripheral clocks, and hooking these as the parents of
+ * the individual peripheral clocks.
+ *
+ * (3) is handled by specifying the bits in the PRCC control registers required
+ * to enable these clocks and modifying them in the ->enable and
+ * ->disable callbacks of the peripheral clocks (DEFINE_PRCC_CLK).
+ *
+ * This structure describes both the PRCMU-level clocks and PRCC-level clocks.
+ * The prcmu_* fields are only used for the PRCMU clocks, and the cluster,
+ * prcc, and parent pointers are only used for the PRCC-level clocks.
+ */
+struct clk {
+        const struct clkops     *ops;
+        const char              *name;
+        unsigned int            enabled;
+        unsigned long           rate;
+        struct list_head        list;
+        /* These three are only for PRCMU clks */
+        unsigned int            prcmu_cg_off;
+        unsigned int            prcmu_cg_bit;
+        unsigned int            prcmu_cg_mgt;
+        /* The rest are only for PRCC clks */
+        int                     cluster;
+        unsigned int            prcc_bus;
+        unsigned int            prcc_kernel;
+        struct clk              *parent_cluster;
+        struct clk              *parent_periph;
+};
+#define DEFINE_PRCMU_CLK(_name, _cg_off, _cg_bit, _reg)         \
+struct clk clk_##_name = {                                      \
+                .name           = #_name,                       \
+                .ops            = &clk_prcmu_ops,               \
+                .prcmu_cg_off   = _cg_off,                      \
+                .prcmu_cg_bit   = _cg_bit,                      \
+                .prcmu_cg_mgt   = PRCM_##_reg##_MGT             \
+        }
+#define DEFINE_PRCMU_CLK_RATE(_name, _cg_off, _cg_bit, _reg, _rate)     \
+struct clk clk_##_name = {                                              \
+                .name           = #_name,                               \
+                .ops            = &clk_prcmu_ops,                       \
+                .prcmu_cg_off   = _cg_off,                              \
+                .prcmu_cg_bit   = _cg_bit,                              \
+                .rate           = _rate,                                \
+                .prcmu_cg_mgt   = PRCM_##_reg##_MGT                     \
+        }
+#define DEFINE_PRCC_CLK(_pclust, _name, _bus_en, _kernel_en, _kernclk)  \
+struct clk clk_##_name = {                                              \
+                .name           = #_name,                               \
+                .ops            = &clk_prcc_ops,                        \
+                .cluster        = _pclust,                              \
+                .prcc_bus       = _bus_en,                              \
+                .prcc_kernel    = _kernel_en,                           \
+                .parent_cluster = &clk_per##_pclust##clk,               \
+                .parent_periph  = _kernclk                              \
+        }
+#define CLK(_clk, _devname, _conname)                   \
+        {                                               \
+                .clk    = &clk_##_clk,                  \
+                .dev_id = _devname,                     \
+                .con_id = _conname,                     \
+        }
diff --git a/arch/arm/mach-ux500/cpu-db5500.c b/arch/arm/mach-ux500/cpu-db5500.c
new file mode 100644
index 000000000000..6a3ac4539f16
--- /dev/null
+++ b/arch/arm/mach-ux500/cpu-db5500.c
@@ -0,0 +1,50 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
+ * License terms: GNU General Public License (GPL) version 2
+ */
+#include <linux/platform_device.h>
+#include <linux/amba/bus.h>
+#include <linux/io.h>
+#include <asm/mach/map.h>
+#include <mach/hardware.h>
+#include <mach/devices.h>
+#include <mach/setup.h>
+static struct map_desc u5500_io_desc[] __initdata = {
+        __IO_DEV_DESC(U5500_GPIO0_BASE, SZ_4K),
+        __IO_DEV_DESC(U5500_GPIO1_BASE, SZ_4K),
+        __IO_DEV_DESC(U5500_GPIO2_BASE, SZ_4K),
+        __IO_DEV_DESC(U5500_GPIO3_BASE, SZ_4K),
+        __IO_DEV_DESC(U5500_GPIO4_BASE, SZ_4K),
+};
+static struct platform_device *u5500_platform_devs[] __initdata = {
+        &u5500_gpio_devs[0],
+        &u5500_gpio_devs[1],
+        &u5500_gpio_devs[2],
+        &u5500_gpio_devs[3],
+        &u5500_gpio_devs[4],
+        &u5500_gpio_devs[5],
+        &u5500_gpio_devs[6],
+        &u5500_gpio_devs[7],
+};
+void __init u5500_map_io(void)
+{
+        ux500_map_io();
+        iotable_init(u5500_io_desc, ARRAY_SIZE(u5500_io_desc));
+}
+void __init u5500_init_devices(void)
+{
+        ux500_init_devices();
+        platform_add_devices(u5500_platform_devs,
+                             ARRAY_SIZE(u5500_platform_devs));
+}
diff --git a/arch/arm/mach-ux500/cpu-u8500.c b/arch/arm/mach-ux500/cpu-db8500.c
index 397bc1f9ed94..d04299f3b6b5 100644
--- a/arch/arm/mach-ux500/cpu-u8500.c
+++ b/arch/arm/mach-ux500/cpu-db8500.c
@@ -13,44 +13,55 @@
 #include <linux/device.h>
 #include <linux/amba/bus.h>
 #include <linux/irq.h>
+#include <linux/gpio.h>
 #include <linux/platform_device.h>
+#include <linux/io.h>
-#include <asm/hardware/gic.h>
 #include <asm/mach/map.h>
 #include <mach/hardware.h>
+#include <mach/setup.h>
+#include <mach/devices.h>
-/* add any platform devices here - TODO */
 static struct platform_device *platform_devs[] __initdata = {
-        /* yet to be added, add i2c0, gpio.. */
+        &u8500_gpio_devs[0],
+        &u8500_gpio_devs[1],
+        &u8500_gpio_devs[2],
+        &u8500_gpio_devs[3],
+        &u8500_gpio_devs[4],
+        &u8500_gpio_devs[5],
+        &u8500_gpio_devs[6],
+        &u8500_gpio_devs[7],
+        &u8500_gpio_devs[8],
 };
-#define __IO_DEV_DESC(x, sz)    {               \
-        .virtual        = IO_ADDRESS(x),        \
-        .pfn            = __phys_to_pfn(x),     \
-        .length         = sz,                   \
-        .type           = MT_DEVICE,            \
-}
 /* minimum static i/o mapping required to boot U8500 platforms */
 static struct map_desc u8500_io_desc[] __initdata = {
-        __IO_DEV_DESC(U8500_UART2_BASE, SZ_4K),
+        __IO_DEV_DESC(U8500_PRCMU_BASE, SZ_4K),
-        __IO_DEV_DESC(U8500_GIC_CPU_BASE, SZ_4K),
+        __IO_DEV_DESC(U8500_GPIO0_BASE, SZ_4K),
-        __IO_DEV_DESC(U8500_GIC_DIST_BASE, SZ_4K),
+        __IO_DEV_DESC(U8500_GPIO1_BASE, SZ_4K),
+        __IO_DEV_DESC(U8500_GPIO2_BASE, SZ_4K),
+        __IO_DEV_DESC(U8500_GPIO3_BASE, SZ_4K),
+};
+static struct map_desc u8500ed_io_desc[] __initdata = {
+        __IO_DEV_DESC(U8500_MTU0_BASE_ED, SZ_4K),
+        __IO_DEV_DESC(U8500_CLKRST7_BASE_ED, SZ_8K),
+};
+static struct map_desc u8500v1_io_desc[] __initdata = {
        __IO_DEV_DESC(U8500_MTU0_BASE, SZ_4K),
-        __IO_DEV_DESC(U8500_TWD_BASE, SZ_4K),
-        __IO_DEV_DESC(U8500_SCU_BASE, SZ_4K),
-        __IO_DEV_DESC(U8500_BACKUPRAM0_BASE, SZ_8K),
 };
 void __init u8500_map_io(void)
 {
+        ux500_map_io();
        iotable_init(u8500_io_desc, ARRAY_SIZE(u8500_io_desc));
-}
-void __init u8500_init_irq(void)
+        if (cpu_is_u8500ed())
-{
+                iotable_init(u8500ed_io_desc, ARRAY_SIZE(u8500ed_io_desc));
-        gic_dist_init(0, __io_address(U8500_GIC_DIST_BASE), 29);
+        else
-        gic_cpu_init(0, __io_address(U8500_GIC_CPU_BASE));
+                iotable_init(u8500v1_io_desc, ARRAY_SIZE(u8500v1_io_desc));
 }
 /*
@@ -58,6 +69,8 @@ void __init u8500_init_irq(void)
 */
 void __init u8500_init_devices(void)
 {
+        ux500_init_devices();
        /* Register the platform devices */
        platform_add_devices(platform_devs, ARRAY_SIZE(platform_devs));
diff --git a/arch/arm/mach-ux500/cpu.c b/arch/arm/mach-ux500/cpu.c
new file mode 100644
index 000000000000..d81ad023963c
--- /dev/null
+++ b/arch/arm/mach-ux500/cpu.c
@@ -0,0 +1,99 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
+ * License terms: GNU General Public License (GPL) version 2
+ */
+#include <linux/platform_device.h>
+#include <linux/amba/bus.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <asm/hardware/cache-l2x0.h>
+#include <asm/hardware/gic.h>
+#include <asm/mach/map.h>
+#include <asm/localtimer.h>
+#include <plat/mtu.h>
+#include <mach/hardware.h>
+#include <mach/setup.h>
+#include <mach/devices.h>
+#include "clock.h"
+static struct map_desc ux500_io_desc[] __initdata = {
+        __IO_DEV_DESC(UX500_UART0_BASE, SZ_4K),
+        __IO_DEV_DESC(UX500_UART2_BASE, SZ_4K),
+        __IO_DEV_DESC(UX500_GIC_CPU_BASE, SZ_4K),
+        __IO_DEV_DESC(UX500_GIC_DIST_BASE, SZ_4K),
+        __IO_DEV_DESC(UX500_L2CC_BASE, SZ_4K),
+        __IO_DEV_DESC(UX500_TWD_BASE, SZ_4K),
+        __IO_DEV_DESC(UX500_SCU_BASE, SZ_4K),
+        __IO_DEV_DESC(UX500_CLKRST1_BASE, SZ_4K),
+        __IO_DEV_DESC(UX500_CLKRST2_BASE, SZ_4K),
+        __IO_DEV_DESC(UX500_CLKRST3_BASE, SZ_4K),
+        __IO_DEV_DESC(UX500_CLKRST5_BASE, SZ_4K),
+        __IO_DEV_DESC(UX500_CLKRST6_BASE, SZ_4K),
+        __IO_DEV_DESC(UX500_MTU0_BASE, SZ_4K),
+        __IO_DEV_DESC(UX500_MTU1_BASE, SZ_4K),
+        __IO_DEV_DESC(UX500_BACKUPRAM0_BASE, SZ_8K),
+};
+static struct amba_device *ux500_amba_devs[] __initdata = {
+        &ux500_pl031_device,
+};
+void __init ux500_map_io(void)
+{
+        iotable_init(ux500_io_desc, ARRAY_SIZE(ux500_io_desc));
+}
+void __init ux500_init_devices(void)
+{
+        amba_add_devices(ux500_amba_devs, ARRAY_SIZE(ux500_amba_devs));
+}
+void __init ux500_init_irq(void)
+{
+        gic_dist_init(0, __io_address(UX500_GIC_DIST_BASE), 29);
+        gic_cpu_init(0, __io_address(UX500_GIC_CPU_BASE));
+}
+#ifdef CONFIG_CACHE_L2X0
+static int ux500_l2x0_init(void)
+{
+        void __iomem *l2x0_base;
+        l2x0_base = __io_address(UX500_L2CC_BASE);
+        /* 64KB way size, 8 way associativity, force WA */
+        l2x0_init(l2x0_base, 0x3e060000, 0xc0000fff);
+        return 0;
+}
+early_initcall(ux500_l2x0_init);
+#endif
+static void __init ux500_timer_init(void)
+{
+#ifdef CONFIG_LOCAL_TIMERS
+        /* Setup the local timer base */
+        twd_base = __io_address(UX500_TWD_BASE);
+#endif
+        /* Setup the MTU base */
+        if (cpu_is_u8500ed())
+                mtu_base = __io_address(U8500_MTU0_BASE_ED);
+        else
+                mtu_base = __io_address(UX500_MTU0_BASE);
+        nmdk_timer_init();
+}
+struct sys_timer ux500_timer = {
+        .init   = ux500_timer_init,
+};
diff --git a/arch/arm/mach-ux500/devices-db5500.c b/arch/arm/mach-ux500/devices-db5500.c
new file mode 100644
index 000000000000..33e5b56bebb6
--- /dev/null
+++ b/arch/arm/mach-ux500/devices-db5500.c
@@ -0,0 +1,46 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
+ * License terms: GNU General Public License (GPL) version 2
+ */
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/gpio.h>
+#include <mach/hardware.h>
+#include <mach/devices.h>
+static struct nmk_gpio_platform_data u5500_gpio_data[] = {
+        GPIO_DATA("GPIO-0-31", 0),
+        GPIO_DATA("GPIO-32-63", 32), /* 36..63 not routed to pin */
+        GPIO_DATA("GPIO-64-95", 64), /* 83..95 not routed to pin */
+        GPIO_DATA("GPIO-96-127", 96), /* 102..127 not routed to pin */
+        GPIO_DATA("GPIO-128-159", 128), /* 149..159 not routed to pin */
+        GPIO_DATA("GPIO-160-191", 160),
+        GPIO_DATA("GPIO-192-223", 192),
+        GPIO_DATA("GPIO-224-255", 224), /* 228..255 not routed to pin */
+};
+static struct resource u5500_gpio_resources[] = {
+        GPIO_RESOURCE(0),
+        GPIO_RESOURCE(1),
+        GPIO_RESOURCE(2),
+        GPIO_RESOURCE(3),
+        GPIO_RESOURCE(4),
+        GPIO_RESOURCE(5),
+        GPIO_RESOURCE(6),
+        GPIO_RESOURCE(7),
+};
+struct platform_device u5500_gpio_devs[] = {
+        GPIO_DEVICE(0),
+        GPIO_DEVICE(1),
+        GPIO_DEVICE(2),
+        GPIO_DEVICE(3),
+        GPIO_DEVICE(4),
+        GPIO_DEVICE(5),
+        GPIO_DEVICE(6),
+        GPIO_DEVICE(7),
+};
diff --git a/arch/arm/mach-ux500/devices-db8500.c b/arch/arm/mach-ux500/devices-db8500.c
new file mode 100644
index 000000000000..20334236afce
--- /dev/null
+++ b/arch/arm/mach-ux500/devices-db8500.c
@@ -0,0 +1,107 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
+ * License terms: GNU General Public License (GPL) version 2
+ */
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/amba/bus.h>
+#include <mach/hardware.h>
+#include <mach/setup.h>
+static struct nmk_gpio_platform_data u8500_gpio_data[] = {
+        GPIO_DATA("GPIO-0-31", 0),
+        GPIO_DATA("GPIO-32-63", 32), /* 37..63 not routed to pin */
+        GPIO_DATA("GPIO-64-95", 64),
+        GPIO_DATA("GPIO-96-127", 96), /* 98..127 not routed to pin */
+        GPIO_DATA("GPIO-128-159", 128),
+        GPIO_DATA("GPIO-160-191", 160), /* 172..191 not routed to pin */
+        GPIO_DATA("GPIO-192-223", 192),
+        GPIO_DATA("GPIO-224-255", 224), /* 231..255 not routed to pin */
+        GPIO_DATA("GPIO-256-288", 256), /* 268..288 not routed to pin */
+};
+static struct resource u8500_gpio_resources[] = {
+        GPIO_RESOURCE(0),
+        GPIO_RESOURCE(1),
+        GPIO_RESOURCE(2),
+        GPIO_RESOURCE(3),
+        GPIO_RESOURCE(4),
+        GPIO_RESOURCE(5),
+        GPIO_RESOURCE(6),
+        GPIO_RESOURCE(7),
+        GPIO_RESOURCE(8),
+};
+struct platform_device u8500_gpio_devs[] = {
+        GPIO_DEVICE(0),
+        GPIO_DEVICE(1),
+        GPIO_DEVICE(2),
+        GPIO_DEVICE(3),
+        GPIO_DEVICE(4),
+        GPIO_DEVICE(5),
+        GPIO_DEVICE(6),
+        GPIO_DEVICE(7),
+        GPIO_DEVICE(8),
+};
+struct amba_device u8500_ssp0_device = {
+        .dev = {
+                .coherent_dma_mask = ~0,
+                .init_name = "ssp0",
+        },
+        .res = {
+                .start = U8500_SSP0_BASE,
+                .end   = U8500_SSP0_BASE + SZ_4K - 1,
+                .flags = IORESOURCE_MEM,
+        },
+        .irq = {IRQ_SSP0, NO_IRQ },
+        /* ST-Ericsson modified id */
+        .periphid = SSP_PER_ID,
+};
+static struct resource u8500_i2c0_resources[] = {
+        [0] = {
+                .start  = U8500_I2C0_BASE,
+                .end    = U8500_I2C0_BASE + SZ_4K - 1,
+                .flags  = IORESOURCE_MEM,
+        },
+        [1] = {
+                .start  = IRQ_I2C0,
+                .end    = IRQ_I2C0,
+                .flags  = IORESOURCE_IRQ,
+        }
+};
+struct platform_device u8500_i2c0_device = {
+        .name           = "nmk-i2c",
+        .id             = 0,
+        .resource       = u8500_i2c0_resources,
+        .num_resources  = ARRAY_SIZE(u8500_i2c0_resources),
+};
+static struct resource u8500_i2c4_resources[] = {
+        [0] = {
+                .start  = U8500_I2C4_BASE,
+                .end    = U8500_I2C4_BASE + SZ_4K - 1,
+                .flags  = IORESOURCE_MEM,
+        },
+        [1] = {
+                .start  = IRQ_I2C4,
+                .end    = IRQ_I2C4,
+                .flags  = IORESOURCE_IRQ,
+        }
+};
+struct platform_device u8500_i2c4_device = {
+        .name           = "nmk-i2c",
+        .id             = 4,
+        .resource       = u8500_i2c4_resources,
+        .num_resources  = ARRAY_SIZE(u8500_i2c4_resources),
+};
diff --git a/arch/arm/mach-ux500/devices.c b/arch/arm/mach-ux500/devices.c
new file mode 100644
index 000000000000..8a268893cb7f
--- /dev/null
+++ b/arch/arm/mach-ux500/devices.c
@@ -0,0 +1,88 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
+ * License terms: GNU General Public License (GPL) version 2
+ */
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/amba/bus.h>
+#include <mach/hardware.h>
+#include <mach/setup.h>
+#define __MEM_4K_RESOURCE(x) \
+        .res = {.start = (x), .end = (x) + SZ_4K - 1, .flags = IORESOURCE_MEM}
+struct amba_device ux500_pl031_device = {
+        .dev = {
+                .init_name = "pl031",
+        },
+        .res = {
+                .start  = UX500_RTC_BASE,
+                .end    = UX500_RTC_BASE + SZ_4K - 1,
+                .flags  = IORESOURCE_MEM,
+        },
+        .irq = {IRQ_RTC_RTT, NO_IRQ},
+};
+struct amba_device ux500_uart0_device = {
+        .dev = { .init_name = "uart0" },
+        __MEM_4K_RESOURCE(UX500_UART0_BASE),
+        .irq = {IRQ_UART0, NO_IRQ},
+};
+struct amba_device ux500_uart1_device = {
+        .dev = { .init_name = "uart1" },
+        __MEM_4K_RESOURCE(UX500_UART1_BASE),
+        .irq = {IRQ_UART1, NO_IRQ},
+};
+struct amba_device ux500_uart2_device = {
+        .dev = { .init_name = "uart2" },
+        __MEM_4K_RESOURCE(UX500_UART2_BASE),
+        .irq = {IRQ_UART2, NO_IRQ},
+};
+#define UX500_I2C_RESOURCES(id, size)                           \
+static struct resource ux500_i2c##id##_resources[] = {          \
+        [0] = {                                                 \
+                .start  = UX500_I2C##id##_BASE,                 \
+                .end    = UX500_I2C##id##_BASE + size - 1,      \
+                .flags  = IORESOURCE_MEM,                       \
+        },                                                      \
+        [1] = {                                                 \
+                .start  = IRQ_I2C##id,                          \
+                .end    = IRQ_I2C##id,                          \
+                .flags  = IORESOURCE_IRQ                        \
+        }                                                       \
+}
+UX500_I2C_RESOURCES(1, SZ_4K);
+UX500_I2C_RESOURCES(2, SZ_4K);
+UX500_I2C_RESOURCES(3, SZ_4K);
+#define UX500_I2C_PDEVICE(cid)                                  \
+struct platform_device ux500_i2c##cid##_device = {              \
+        .name           = "nmk-i2c",                            \
+        .id             = cid,                                  \
+        .num_resources  = 2,                                    \
+        .resource       = ux500_i2c##cid##_resources,           \
+}
+UX500_I2C_PDEVICE(1);
+UX500_I2C_PDEVICE(2);
+UX500_I2C_PDEVICE(3);
+void __init amba_add_devices(struct amba_device *devs[], int num)
+{
+        int i;
+        for (i = 0; i < num; i++) {
+                struct amba_device *d = devs[i];
+                amba_device_register(d, &iomem_resource);
+        }
+}
diff --git a/arch/arm/mach-ux500/include/mach/db5500-regs.h b/arch/arm/mach-ux500/include/mach/db5500-regs.h
new file mode 100644
index 000000000000..545c80fc8024
--- /dev/null
+++ b/arch/arm/mach-ux500/include/mach/db5500-regs.h
@@ -0,0 +1,103 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * License terms: GNU General Public License (GPL) version 2
+ */
+#ifndef __MACH_DB5500_REGS_H
+#define __MACH_DB5500_REGS_H
+#define U5500_PER1_BASE         0xA0020000
+#define U5500_PER2_BASE         0xA0010000
+#define U5500_PER3_BASE         0x80140000
+#define U5500_PER4_BASE         0x80150000
+#define U5500_PER5_BASE         0x80100000
+#define U5500_PER6_BASE         0x80120000
+#define U5500_GIC_DIST_BASE     0xA0411000
+#define U5500_GIC_CPU_BASE      0xA0410100
+#define U5500_DMA_BASE          0x90030000
+#define U5500_MCDE_BASE         0xA0400000
+#define U5500_MODEM_BASE        0xB0000000
+#define U5500_L2CC_BASE         0xA0412000
+#define U5500_SCU_BASE          0xA0410000
+#define U5500_DSI1_BASE         0xA0401000
+#define U5500_DSI2_BASE         0xA0402000
+#define U5500_SIA_BASE          0xA0100000
+#define U5500_SVA_BASE          0x80200000
+#define U5500_HSEM_BASE         0xA0000000
+#define U5500_NAND0_BASE        0x60000000
+#define U5500_NAND1_BASE        0x70000000
+#define U5500_TWD_BASE          0xa0410600
+#define U5500_B2R2_BASE         0xa0200000
+#define U5500_FSMC_BASE         (U5500_PER1_BASE + 0x0000)
+#define U5500_SDI0_BASE         (U5500_PER1_BASE + 0x1000)
+#define U5500_SDI2_BASE         (U5500_PER1_BASE + 0x2000)
+#define U5500_UART0_BASE        (U5500_PER1_BASE + 0x3000)
+#define U5500_I2C1_BASE         (U5500_PER1_BASE + 0x4000)
+#define U5500_MSP0_BASE         (U5500_PER1_BASE + 0x5000)
+#define U5500_GPIO0_BASE        (U5500_PER1_BASE + 0xE000)
+#define U5500_CLKRST1_BASE      (U5500_PER1_BASE + 0xF000)
+#define U5500_USBOTG_BASE       (U5500_PER2_BASE + 0x0000)
+#define U5500_GPIO1_BASE        (U5500_PER2_BASE + 0xE000)
+#define U5500_CLKRST2_BASE      (U5500_PER2_BASE + 0xF000)
+#define U5500_KEYPAD_BASE       (U5500_PER3_BASE + 0x0000)
+#define U5500_PWM_BASE          (U5500_PER3_BASE + 0x1000)
+#define U5500_GPIO3_BASE        (U5500_PER3_BASE + 0xE000)
+#define U5500_CLKRST3_BASE      (U5500_PER3_BASE + 0xF000)
+#define U5500_BACKUPRAM0_BASE   (U5500_PER4_BASE + 0x0000)
+#define U5500_BACKUPRAM1_BASE   (U5500_PER4_BASE + 0x1000)
+#define U5500_RTT0_BASE         (U5500_PER4_BASE + 0x2000)
+#define U5500_RTT1_BASE         (U5500_PER4_BASE + 0x3000)
+#define U5500_RTC_BASE          (U5500_PER4_BASE + 0x4000)
+#define U5500_SCR_BASE          (U5500_PER4_BASE + 0x5000)
+#define U5500_DMC_BASE          (U5500_PER4_BASE + 0x6000)
+#define U5500_PRCMU_BASE        (U5500_PER4_BASE + 0x7000)
+#define U5500_MSP1_BASE         (U5500_PER4_BASE + 0x9000)
+#define U5500_GPIO2_BASE        (U5500_PER4_BASE + 0xA000)
+#define U5500_CDETECT_BASE      (U5500_PER4_BASE + 0xF000)
+#define U5500_SPI0_BASE         (U5500_PER5_BASE + 0x0000)
+#define U5500_SPI1_BASE         (U5500_PER5_BASE + 0x1000)
+#define U5500_SPI2_BASE         (U5500_PER5_BASE + 0x2000)
+#define U5500_SPI3_BASE         (U5500_PER5_BASE + 0x3000)
+#define U5500_UART1_BASE        (U5500_PER5_BASE + 0x4000)
+#define U5500_UART2_BASE        (U5500_PER5_BASE + 0x5000)
+#define U5500_UART3_BASE        (U5500_PER5_BASE + 0x6000)
+#define U5500_SDI1_BASE         (U5500_PER5_BASE + 0x7000)
+#define U5500_SDI3_BASE         (U5500_PER5_BASE + 0x8000)
+#define U5500_SDI4_BASE         (U5500_PER5_BASE + 0x9000)
+#define U5500_I2C2_BASE         (U5500_PER5_BASE + 0xA000)
+#define U5500_I2C3_BASE         (U5500_PER5_BASE + 0xB000)
+#define U5500_MSP2_BASE         (U5500_PER5_BASE + 0xC000)
+#define U5500_IRDA_BASE         (U5500_PER5_BASE + 0xD000)
+#define U5500_IRRC_BASE         (U5500_PER5_BASE + 0x10000)
+#define U5500_GPIO4_BASE        (U5500_PER5_BASE + 0x1E000)
+#define U5500_CLKRST5_BASE      (U5500_PER5_BASE + 0x1F000)
+#define U5500_RNG_BASE          (U5500_PER6_BASE + 0x0000)
+#define U5500_HASH0_BASE        (U5500_PER6_BASE + 0x1000)
+#define U5500_HASH1_BASE        (U5500_PER6_BASE + 0x2000)
+#define U5500_PKA_BASE          (U5500_PER6_BASE + 0x4000)
+#define U5500_PKAM_BASE         (U5500_PER6_BASE + 0x5000)
+#define U5500_MTU0_BASE         (U5500_PER6_BASE + 0x6000)
+#define U5500_MTU1_BASE         (U5500_PER6_BASE + 0x7000)
+#define U5500_CR_BASE           (U5500_PER6_BASE + 0x8000)
+#define U5500_CRYP0_BASE        (U5500_PER6_BASE + 0xA000)
+#define U5500_CRYP1_BASE        (U5500_PER6_BASE + 0xB000)
+#define U5500_CLKRST6_BASE      (U5500_PER6_BASE + 0xF000)
+#define U5500_GPIOBANK0_BASE    U5500_GPIO0_BASE
+#define U5500_GPIOBANK1_BASE    (U5500_GPIO0_BASE + 0x80)
+#define U5500_GPIOBANK2_BASE    U5500_GPIO1_BASE
+#define U5500_GPIOBANK3_BASE    U5500_GPIO2_BASE
+#define U5500_GPIOBANK4_BASE    U5500_GPIO3_BASE
+#define U5500_GPIOBANK5_BASE    U5500_GPIO4_BASE
+#define U5500_GPIOBANK6_BASE    (U5500_GPIO4_BASE + 0x80)
+#define U5500_GPIOBANK7_BASE    (U5500_GPIO4_BASE + 0x100)
+#endif
diff --git a/arch/arm/mach-ux500/include/mach/db8500-regs.h b/arch/arm/mach-ux500/include/mach/db8500-regs.h
new file mode 100644
index 000000000000..9169e1e382a3
--- /dev/null
+++ b/arch/arm/mach-ux500/include/mach/db8500-regs.h
@@ -0,0 +1,135 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * License terms: GNU General Public License (GPL) version 2
+ */
+#ifndef __MACH_DB8500_REGS_H
+#define __MACH_DB8500_REGS_H
+#define U8500_PER3_BASE         0x80000000
+#define U8500_STM_BASE          0x80100000
+#define U8500_STM_REG_BASE      (U8500_STM_BASE + 0xF000)
+#define U8500_PER2_BASE         0x80110000
+#define U8500_PER1_BASE         0x80120000
+#define U8500_B2R2_BASE         0x80130000
+#define U8500_HSEM_BASE         0x80140000
+#define U8500_PER4_BASE         0x80150000
+#define U8500_ICN_BASE          0x81000000
+#define U8500_BOOT_ROM_BASE     0x90000000
+/* ASIC ID is at 0xff4 offset within this region */
+#define U8500_ASIC_ID_BASE      0x9001F000
+#define U8500_PER6_BASE         0xa03c0000
+#define U8500_PER5_BASE         0xa03e0000
+#define U8500_PER7_BASE_ED      0xa03d0000
+#define U8500_SVA_BASE          0xa0100000
+#define U8500_SIA_BASE          0xa0200000
+#define U8500_SGA_BASE          0xa0300000
+#define U8500_MCDE_BASE         0xa0350000
+#define U8500_DMA_BASE_ED       0xa0362000
+#define U8500_DMA_BASE          0x801C0000      /* v1 */
+#define U8500_SBAG_BASE         0xa0390000
+#define U8500_SCU_BASE          0xa0410000
+#define U8500_GIC_CPU_BASE      0xa0410100
+#define U8500_TWD_BASE          0xa0410600
+#define U8500_GIC_DIST_BASE     0xa0411000
+#define U8500_L2CC_BASE         0xa0412000
+#define U8500_MODEM_I2C         0xb7e02000
+#define U8500_GPIO0_BASE        (U8500_PER1_BASE + 0xE000)
+#define U8500_GPIO1_BASE        (U8500_PER3_BASE + 0xE000)
+#define U8500_GPIO2_BASE        (U8500_PER2_BASE + 0xE000)
+#define U8500_GPIO3_BASE        (U8500_PER5_BASE + 0x1E000)
+/* per7 base addressess */
+#define U8500_CR_BASE_ED        (U8500_PER7_BASE_ED + 0x8000)
+#define U8500_MTU0_BASE_ED      (U8500_PER7_BASE_ED + 0xa000)
+#define U8500_MTU1_BASE_ED      (U8500_PER7_BASE_ED + 0xb000)
+#define U8500_TZPC0_BASE_ED     (U8500_PER7_BASE_ED + 0xc000)
+#define U8500_CLKRST7_BASE_ED   (U8500_PER7_BASE_ED + 0xf000)
+#define U8500_UART0_BASE        (U8500_PER1_BASE + 0x0000)
+#define U8500_UART1_BASE        (U8500_PER1_BASE + 0x1000)
+/* per6 base addressess */
+#define U8500_RNG_BASE          (U8500_PER6_BASE + 0x0000)
+#define U8500_PKA_BASE          (U8500_PER6_BASE + 0x1000)
+#define U8500_PKAM_BASE         (U8500_PER6_BASE + 0x2000)
+#define U8500_MTU0_BASE         (U8500_PER6_BASE + 0x6000) /* v1 */
+#define U8500_MTU1_BASE         (U8500_PER6_BASE + 0x7000) /* v1 */
+#define U8500_CR_BASE           (U8500_PER6_BASE + 0x8000) /* v1 */
+#define U8500_CRYPTO0_BASE      (U8500_PER6_BASE + 0xa000)
+#define U8500_CRYPTO1_BASE      (U8500_PER6_BASE + 0xb000)
+#define U8500_CLKRST6_BASE      (U8500_PER6_BASE + 0xf000)
+/* per5 base addressess */
+#define U8500_USBOTG_BASE       (U8500_PER5_BASE + 0x00000)
+#define U8500_CLKRST5_BASE      (U8500_PER5_BASE + 0x1f000)
+/* per4 base addressess */
+#define U8500_BACKUPRAM0_BASE   (U8500_PER4_BASE + 0x00000)
+#define U8500_BACKUPRAM1_BASE   (U8500_PER4_BASE + 0x01000)
+#define U8500_RTT0_BASE         (U8500_PER4_BASE + 0x02000)
+#define U8500_RTT1_BASE         (U8500_PER4_BASE + 0x03000)
+#define U8500_RTC_BASE          (U8500_PER4_BASE + 0x04000)
+#define U8500_SCR_BASE          (U8500_PER4_BASE + 0x05000)
+#define U8500_DMC_BASE          (U8500_PER4_BASE + 0x06000)
+#define U8500_PRCMU_BASE        (U8500_PER4_BASE + 0x07000)
+#define U8500_PRCMU_TCDM_BASE   (U8500_PER4_BASE + 0x0f000)
+/* per3 base addresses */
+#define U8500_FSMC_BASE         (U8500_PER3_BASE + 0x0000)
+#define U8500_SSP0_BASE         (U8500_PER3_BASE + 0x2000)
+#define U8500_SSP1_BASE         (U8500_PER3_BASE + 0x3000)
+#define U8500_I2C0_BASE         (U8500_PER3_BASE + 0x4000)
+#define U8500_SDI2_BASE         (U8500_PER3_BASE + 0x5000)
+#define U8500_SKE_BASE          (U8500_PER3_BASE + 0x6000)
+#define U8500_UART2_BASE        (U8500_PER3_BASE + 0x7000)
+#define U8500_SDI5_BASE         (U8500_PER3_BASE + 0x8000)
+#define U8500_CLKRST3_BASE      (U8500_PER3_BASE + 0xf000)
+/* per2 base addressess */
+#define U8500_I2C3_BASE         (U8500_PER2_BASE + 0x0000)
+#define U8500_SPI2_BASE         (U8500_PER2_BASE + 0x1000)
+#define U8500_SPI1_BASE         (U8500_PER2_BASE + 0x2000)
+#define U8500_PWL_BASE          (U8500_PER2_BASE + 0x3000)
+#define U8500_SDI4_BASE         (U8500_PER2_BASE + 0x4000)
+#define U8500_MSP2_BASE         (U8500_PER2_BASE + 0x7000)
+#define U8500_SDI1_BASE         (U8500_PER2_BASE + 0x8000)
+#define U8500_SDI3_BASE         (U8500_PER2_BASE + 0x9000)
+#define U8500_SPI0_BASE         (U8500_PER2_BASE + 0xa000)
+#define U8500_HSIR_BASE         (U8500_PER2_BASE + 0xb000)
+#define U8500_HSIT_BASE         (U8500_PER2_BASE + 0xc000)
+#define U8500_CLKRST2_BASE      (U8500_PER2_BASE + 0xf000)
+/* per1 base addresses */
+#define U8500_I2C1_BASE         (U8500_PER1_BASE + 0x2000)
+#define U8500_MSP0_BASE         (U8500_PER1_BASE + 0x3000)
+#define U8500_MSP1_BASE         (U8500_PER1_BASE + 0x4000)
+#define U8500_SDI0_BASE         (U8500_PER1_BASE + 0x6000)
+#define U8500_I2C2_BASE         (U8500_PER1_BASE + 0x8000)
+#define U8500_SPI3_BASE         (U8500_PER1_BASE + 0x9000)
+#define U8500_I2C4_BASE         (U8500_PER1_BASE + 0xa000)
+#define U8500_SLIM0_BASE        (U8500_PER1_BASE + 0xb000)
+#define U8500_CLKRST1_BASE      (U8500_PER1_BASE + 0xf000)
+#define U8500_SHRM_GOP_INTERRUPT_BASE   0xB7C00040
+#define U8500_GPIOBANK0_BASE    U8500_GPIO0_BASE
+#define U8500_GPIOBANK1_BASE    (U8500_GPIO0_BASE + 0x80)
+#define U8500_GPIOBANK2_BASE    U8500_GPIO1_BASE
+#define U8500_GPIOBANK3_BASE    (U8500_GPIO1_BASE + 0x80)
+#define U8500_GPIOBANK4_BASE    (U8500_GPIO1_BASE + 0x100)
+#define U8500_GPIOBANK5_BASE    (U8500_GPIO1_BASE + 0x180)
+#define U8500_GPIOBANK6_BASE    U8500_GPIO2_BASE
+#define U8500_GPIOBANK7_BASE    (U8500_GPIO2_BASE + 0x80)
+#define U8500_GPIOBANK8_BASE    U8500_GPIO3_BASE
+#endif
diff --git a/arch/arm/mach-ux500/include/mach/debug-macro.S b/arch/arm/mach-ux500/include/mach/debug-macro.S
index 09cbfda8aee5..c5203b7ea552 100644
--- a/arch/arm/mach-ux500/include/mach/debug-macro.S
+++ b/arch/arm/mach-ux500/include/mach/debug-macro.S
@@ -10,11 +10,19 @@
 */
 #include <mach/hardware.h>
+#if CONFIG_UX500_DEBUG_UART > 2
+#error Invalid Ux500 debug UART
+#endif
+#define __UX500_UART(n) UX500_UART##n##_BASE
+#define UX500_UART(n)   __UX500_UART(n)
+#define UART_BASE       UX500_UART(CONFIG_UX500_DEBUG_UART)
        .macro  addruart, rx, tmp
        mrc     p15, 0, \rx, c1, c0
        tst     \rx, #1                                 @ MMU enabled?
-        ldreq   \rx, =U8500_UART2_BASE                  @ no, physical address
+        ldreq   \rx, =UART_BASE                         @ no, physical address
-        ldrne   \rx, =IO_ADDRESS(U8500_UART2_BASE)      @ yes, virtual address
+        ldrne   \rx, =IO_ADDRESS(UART_BASE)             @ yes, virtual address
        .endm
 #include <asm/hardware/debug-pl01x.S>
diff --git a/arch/arm/mach-ux500/include/mach/devices.h b/arch/arm/mach-ux500/include/mach/devices.h
new file mode 100644
index 000000000000..0422af00a56e
--- /dev/null
+++ b/arch/arm/mach-ux500/include/mach/devices.h
@@ -0,0 +1,29 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * License terms: GNU General Public License (GPL) version 2
+ */
+#ifndef __ASM_ARCH_DEVICES_H__
+#define __ASM_ARCH_DEVICES_H__
+struct platform_device;
+struct amba_device;
+extern struct platform_device u5500_gpio_devs[];
+extern struct platform_device u8500_gpio_devs[];
+extern struct amba_device ux500_pl031_device;
+extern struct amba_device u8500_ssp0_device;
+extern struct amba_device ux500_uart0_device;
+extern struct amba_device ux500_uart1_device;
+extern struct amba_device ux500_uart2_device;
+extern struct platform_device ux500_i2c1_device;
+extern struct platform_device ux500_i2c2_device;
+extern struct platform_device ux500_i2c3_device;
+extern struct platform_device u8500_i2c0_device;
+extern struct platform_device u8500_i2c4_device;
+#endif
diff --git a/arch/arm/mach-ux500/include/mach/entry-macro.S b/arch/arm/mach-ux500/include/mach/entry-macro.S
index eece3301fef7..60ea88db8283 100644
--- a/arch/arm/mach-ux500/include/mach/entry-macro.S
+++ b/arch/arm/mach-ux500/include/mach/entry-macro.S
@@ -17,7 +17,7 @@
                .endm
                .macro  get_irqnr_preamble, base, tmp
-                ldr     \base, =IO_ADDRESS(U8500_GIC_CPU_BASE)
+                ldr     \base, =IO_ADDRESS(UX500_GIC_CPU_BASE)
                .endm
                .macro  arch_ret_to_user, tmp1, tmp2
diff --git a/arch/arm/mach-ux500/include/mach/gpio.h b/arch/arm/mach-ux500/include/mach/gpio.h
new file mode 100644
index 000000000000..d548a622e7d2
--- /dev/null
+++ b/arch/arm/mach-ux500/include/mach/gpio.h
@@ -0,0 +1,50 @@
+#ifndef __ASM_ARCH_GPIO_H
+#define __ASM_ARCH_GPIO_H
+/*
+ * 288 (#267 is the highest one actually hooked up) onchip GPIOs, plus enough
+ * room for a couple of GPIO expanders.
+ */
+#define ARCH_NR_GPIOS   350
+#include <plat/gpio.h>
+#define __GPIO_RESOURCE(soc, block)                                     \
+        {                                                               \
+                .start  = soc##_GPIOBANK##block##_BASE,                 \
+                .end    = soc##_GPIOBANK##block##_BASE + 127,           \
+                .flags  = IORESOURCE_MEM,                               \
+        },                                                              \
+        {                                                               \
+                .start  = IRQ_GPIO##block,                              \
+                .end    = IRQ_GPIO##block,                              \
+                .flags  = IORESOURCE_IRQ,                               \
+        }
+#define __GPIO_DEVICE(soc, block)                                       \
+        {                                                               \
+                .name           = "gpio",                               \
+                .id             = block,                                \
+                .num_resources  = 2,                                    \
+                .resource       = &soc##_gpio_resources[block * 2],     \
+                .dev = {                                                \
+                        .platform_data = &soc##_gpio_data[block],       \
+                },                                                      \
+        }
+#define GPIO_DATA(_name, first)                                         \
+        {                                                               \
+                .name           = _name,                                \
+                .first_gpio     = first,                                \
+                .first_irq      = NOMADIK_GPIO_TO_IRQ(first),           \
+        }
+#ifdef CONFIG_UX500_SOC_DB8500
+#define GPIO_RESOURCE(block)    __GPIO_RESOURCE(U8500, block)
+#define GPIO_DEVICE(block)      __GPIO_DEVICE(u8500, block)
+#elif defined(CONFIG_UX500_SOC_DB5500)
+#define GPIO_RESOURCE(block)    __GPIO_RESOURCE(U5500, block)
+#define GPIO_DEVICE(block)      __GPIO_DEVICE(u5500, block)
+#endif
+#endif /* __ASM_ARCH_GPIO_H */
diff --git a/arch/arm/mach-ux500/include/mach/hardware.h b/arch/arm/mach-ux500/include/mach/hardware.h
index 04ea836969b3..8656379a8309 100644
--- a/arch/arm/mach-ux500/include/mach/hardware.h
+++ b/arch/arm/mach-ux500/include/mach/hardware.h
@@ -23,109 +23,106 @@
 /* typesafe io address */
 #define __io_address(n)         __io(IO_ADDRESS(n))
+/* used by some plat-nomadik code */
+#define io_p2v(n)               __io_address(n)
-/*
+#include <mach/db8500-regs.h>
- * Base address definitions for U8500 Onchip IPs. All the
+#include <mach/db5500-regs.h>
- * peripherals are contained in a single 1 Mbyte region, with
- * AHB peripherals at the bottom and APB peripherals at the
+#ifdef CONFIG_UX500_SOC_DB8500
- * top of the region. PER stands for PERIPHERAL region which
+#define UX500(periph)           U8500_##periph##_BASE
- * itself divided into sub regions.
+#elif defined(CONFIG_UX500_SOC_DB5500)
- */
+#define UX500(periph)           U5500_##periph##_BASE
-#define U8500_PER3_BASE         0x80000000
+#endif
-#define U8500_PER2_BASE         0x80110000
-#define U8500_PER1_BASE         0x80120000
+#define UX500_BACKUPRAM0_BASE   UX500(BACKUPRAM0)
-#define U8500_PER4_BASE         0x80150000
+#define UX500_BACKUPRAM1_BASE   UX500(BACKUPRAM1)
+#define UX500_B2R2_BASE         UX500(B2R2)
-#define U8500_PER6_BASE         0xa03c0000
-#define U8500_PER5_BASE         0xa03e0000
+#define UX500_CLKRST1_BASE      UX500(CLKRST1)
-#define U8500_PER7_BASE         0xa03d0000
+#define UX500_CLKRST2_BASE      UX500(CLKRST2)
+#define UX500_CLKRST3_BASE      UX500(CLKRST3)
-#define U8500_SVA_BASE          0xa0100000
+#define UX500_CLKRST5_BASE      UX500(CLKRST5)
-#define U8500_SIA_BASE          0xa0200000
+#define UX500_CLKRST6_BASE      UX500(CLKRST6)
-#define U8500_SGA_BASE          0xa0300000
+#define UX500_DMA_BASE          UX500(DMA)
-#define U8500_MCDE_BASE         0xa0350000
+#define UX500_FSMC_BASE         UX500(FSMC)
-#define U8500_DMA_BASE          0xa0362000
+#define UX500_GIC_CPU_BASE      UX500(GIC_CPU)
-#define U8500_SCU_BASE          0xa0410000
+#define UX500_GIC_DIST_BASE     UX500(GIC_DIST)
-#define U8500_GIC_CPU_BASE      0xa0410100
-#define U8500_TWD_BASE          0xa0410600
+#define UX500_I2C1_BASE         UX500(I2C1)
-#define U8500_GIC_DIST_BASE     0xa0411000
+#define UX500_I2C2_BASE         UX500(I2C2)
-#define U8500_L2CC_BASE         0xa0412000
+#define UX500_I2C3_BASE         UX500(I2C3)
-#define U8500_TWD_SIZE          0x100
+#define UX500_L2CC_BASE         UX500(L2CC)
+#define UX500_MCDE_BASE         UX500(MCDE)
-/* per7 base addressess */
+#define UX500_MTU0_BASE         UX500(MTU0)
-#define U8500_CR_BASE           (U8500_PER7_BASE + 0x8000)
+#define UX500_MTU1_BASE         UX500(MTU1)
-#define U8500_MTU0_BASE         (U8500_PER7_BASE + 0xa000)
+#define UX500_PRCMU_BASE        UX500(PRCMU)
-#define U8500_MTU1_BASE         (U8500_PER7_BASE + 0xb000)
-#define U8500_TZPC0_BASE        (U8500_PER7_BASE + 0xc000)
+#define UX500_RNG_BASE          UX500(RNG)
-#define U8500_CLKRST7_BASE      (U8500_PER7_BASE + 0xf000)
+#define UX500_RTC_BASE          UX500(RTC)
-/* per6 base addressess */
+#define UX500_SCU_BASE          UX500(SCU)
-#define U8500_RNG_BASE          (U8500_PER6_BASE + 0x0000)
-#define U8500_PKA_BASE          (U8500_PER6_BASE + 0x1000)
+#define UX500_SDI0_BASE         UX500(SDI0)
-#define U8500_PKAM_BASE         (U8500_PER6_BASE + 0x2000)
+#define UX500_SDI1_BASE         UX500(SDI1)
-#define U8500_CRYPTO0_BASE      (U8500_PER6_BASE + 0xa000)
+#define UX500_SDI2_BASE         UX500(SDI2)
-#define U8500_CRYPTO1_BASE      (U8500_PER6_BASE + 0xb000)
+#define UX500_SDI3_BASE         UX500(SDI3)
-#define U8500_CLKRST6_BASE      (U8500_PER6_BASE + 0xf000)
+#define UX500_SDI4_BASE         UX500(SDI4)
-/* per5 base addressess */
+#define UX500_SPI0_BASE         UX500(SPI0)
-#define U8500_USBOTG_BASE       (U8500_PER5_BASE + 0x00000)
+#define UX500_SPI1_BASE         UX500(SPI1)
-#define U8500_GPIO5_BASE        (U8500_PER5_BASE + 0x1e000)
+#define UX500_SPI2_BASE         UX500(SPI2)
-#define U8500_CLKRST5_BASE      (U8500_PER5_BASE + 0x1f000)
+#define UX500_SPI3_BASE         UX500(SPI3)
-/* per4 base addressess */
+#define UX500_SIA_BASE          UX500(SIA)
-#define U8500_BACKUPRAM0_BASE   (U8500_PER4_BASE + 0x0000)
+#define UX500_SVA_BASE          UX500(SVA)
-#define U8500_BACKUPRAM1_BASE   (U8500_PER4_BASE + 0x1000)
-#define U8500_RTT0_BASE         (U8500_PER4_BASE + 0x2000)
+#define UX500_TWD_BASE          UX500(TWD)
-#define U8500_RTT1_BASE         (U8500_PER4_BASE + 0x3000)
-#define U8500_RTC_BASE          (U8500_PER4_BASE + 0x4000)
+#define UX500_UART0_BASE        UX500(UART0)
-#define U8500_SCR_BASE          (U8500_PER4_BASE + 0x5000)
+#define UX500_UART1_BASE        UX500(UART1)
-#define U8500_DMC_BASE          (U8500_PER4_BASE + 0x6000)
+#define UX500_UART2_BASE        UX500(UART2)
-#define U8500_PRCMU_BASE        (U8500_PER4_BASE + 0x7000)
+#define UX500_USBOTG_BASE       UX500(USBOTG)
-/* per3 base addressess */
-#define U8500_FSMC_BASE         (U8500_PER3_BASE + 0x0000)
-#define U8500_SSP0_BASE         (U8500_PER3_BASE + 0x2000)
-#define U8500_SSP1_BASE         (U8500_PER3_BASE + 0x3000)
-#define U8500_I2C0_BASE         (U8500_PER3_BASE + 0x4000)
-#define U8500_SDI2_BASE         (U8500_PER3_BASE + 0x5000)
-#define U8500_SKE_BASE          (U8500_PER3_BASE + 0x6000)
-#define U8500_UART2_BASE        (U8500_PER3_BASE + 0x7000)
-#define U8500_SDI5_BASE         (U8500_PER3_BASE + 0x8000)
-#define U8500_GPIO3_BASE        (U8500_PER3_BASE + 0xe000)
-#define U8500_CLKRST3_BASE      (U8500_PER3_BASE + 0xf000)
-/* per2 base addressess */
-#define U8500_I2C3_BASE         (U8500_PER2_BASE + 0x0000)
-#define U8500_SPI2_BASE         (U8500_PER2_BASE + 0x1000)
-#define U8500_SPI1_BASE         (U8500_PER2_BASE + 0x2000)
-#define U8500_PWL_BASE          (U8500_PER2_BASE + 0x3000)
-#define U8500_SDI4_BASE         (U8500_PER2_BASE + 0x4000)
-#define U8500_MSP2_BASE         (U8500_PER2_BASE + 0x7000)
-#define U8500_SDI1_BASE         (U8500_PER2_BASE + 0x8000)
-#define U8500_SDI3_BASE         (U8500_PER2_BASE + 0x9000)
-#define U8500_SPI0_BASE         (U8500_PER2_BASE + 0xa000)
-#define U8500_HSIR_BASE         (U8500_PER2_BASE + 0xb000)
-#define U8500_HSIT_BASE         (U8500_PER2_BASE + 0xc000)
-#define U8500_GPIO2_BASE        (U8500_PER2_BASE + 0xe000)
-#define U8500_CLKRST2_BASE      (U8500_PER2_BASE + 0xf000)
-/* per1 base addresses */
-#define U8500_UART0_BASE        (U8500_PER1_BASE + 0x0000)
-#define U8500_UART1_BASE        (U8500_PER1_BASE + 0x1000)
-#define U8500_I2C1_BASE         (U8500_PER1_BASE + 0x2000)
-#define U8500_MSP0_BASE         (U8500_PER1_BASE + 0x3000)
-#define U8500_MSP1_BASE         (U8500_PER1_BASE + 0x4000)
-#define U8500_SDI0_BASE         (U8500_PER1_BASE + 0x6000)
-#define U8500_I2C2_BASE         (U8500_PER1_BASE + 0x8000)
-#define U8500_SPI3_BASE         (U8500_PER1_BASE + 0x9000)
-#define U8500_SLIM0_BASE        (U8500_PER1_BASE + 0xa000)
-#define U8500_GPIO1_BASE        (U8500_PER1_BASE + 0xe000)
-#define U8500_CLKRST1_BASE      (U8500_PER1_BASE + 0xf000)
 /* ST-Ericsson modified pl022 id */
 #define SSP_PER_ID              0x01080022
+#ifndef __ASSEMBLY__
+#include <asm/cputype.h>
+static inline bool cpu_is_u8500(void)
+{
+#ifdef CONFIG_UX500_SOC_DB8500
+        return 1;
+#else
+        return 0;
+#endif
+}
+static inline bool cpu_is_u8500ed(void)
+{
+        return cpu_is_u8500() && (read_cpuid_id() & 15) == 0;
+}
+static inline bool cpu_is_u8500v1(void)
+{
+        return cpu_is_u8500() && (read_cpuid_id() & 15) == 1;
+}
+static inline bool cpu_is_u5500(void)
+{
+#ifdef CONFIG_UX500_SOC_DB5500
+        return 1;
+#else
+        return 0;
+#endif
+}
+#endif
 #endif                          /* __MACH_HARDWARE_H */
diff --git a/arch/arm/mach-ux500/include/mach/irqs.h b/arch/arm/mach-ux500/include/mach/irqs.h
index 394b5dd2200f..7970684b1d09 100644
--- a/arch/arm/mach-ux500/include/mach/irqs.h
+++ b/arch/arm/mach-ux500/include/mach/irqs.h
@@ -42,6 +42,7 @@
 #define IRQ_AB4500              (IRQ_SHPI_START + 40)
 #define IRQ_DISP                (IRQ_SHPI_START + 48)
 #define IRQ_SiPI3               (IRQ_SHPI_START + 49)
+#define IRQ_I2C4                (IRQ_SHPI_START + 51)
 #define IRQ_SSP1                (IRQ_SHPI_START + 52)
 #define IRQ_I2C2                (IRQ_SHPI_START + 55)
 #define IRQ_SDMMC0              (IRQ_SHPI_START + 60)
@@ -66,6 +67,12 @@
 /* There are 128 shared peripheral interrupts assigned to
 * INTID[160:32]. The first 32 interrupts are reserved.
 */
-#define NR_IRQS                 161
+#define U8500_SOC_NR_IRQS               161
+/* After chip-specific IRQ numbers we have the GPIO ones */
+#define NOMADIK_NR_GPIO                 288
+#define NOMADIK_GPIO_TO_IRQ(gpio)       ((gpio) + U8500_SOC_NR_IRQS)
+#define NOMADIK_IRQ_TO_GPIO(irq)        ((irq) - U8500_SOC_NR_IRQS)
+#define NR_IRQS                         NOMADIK_GPIO_TO_IRQ(NOMADIK_NR_GPIO)
 #endif /*ASM_ARCH_IRQS_H*/
diff --git a/arch/arm/mach-ux500/include/mach/setup.h b/arch/arm/mach-ux500/include/mach/setup.h
index cf0ce1687f24..e978dbd9e210 100644
--- a/arch/arm/mach-ux500/include/mach/setup.h
+++ b/arch/arm/mach-ux500/include/mach/setup.h
@@ -14,10 +14,28 @@
 #include <asm/mach/time.h>
 #include <linux/init.h>
-extern void u8500_map_io(void);
+extern void __init ux500_map_io(void);
-extern void u8500_init_devices(void);
+extern void __init u5500_map_io(void);
-extern void u8500_init_irq(void);
+extern void __init u8500_map_io(void);
+extern void __init ux500_init_devices(void);
+extern void __init u5500_init_devices(void);
+extern void __init u8500_init_devices(void);
+extern void __init ux500_init_irq(void);
 /* We re-use nomadik_timer for this platform */
 extern void nmdk_timer_init(void);
+extern void __init amba_add_devices(struct amba_device *devs[], int num);
+struct sys_timer;
+extern struct sys_timer ux500_timer;
+#define __IO_DEV_DESC(x, sz)    {               \
+        .virtual        = IO_ADDRESS(x),        \
+        .pfn            = __phys_to_pfn(x),     \
+        .length         = sz,                   \
+        .type           = MT_DEVICE,            \
+}
 #endif /*  __ASM_ARCH_SETUP_H */
diff --git a/arch/arm/mach-ux500/platsmp.c b/arch/arm/mach-ux500/platsmp.c
index 8dfe7ca245d8..438ef16aec90 100644
--- a/arch/arm/mach-ux500/platsmp.c
+++ b/arch/arm/mach-ux500/platsmp.c
@@ -30,7 +30,7 @@ volatile int __cpuinitdata pen_release = -1;
 static unsigned int __init get_core_count(void)
 {
-        return scu_get_core_count(__io_address(U8500_SCU_BASE));
+        return scu_get_core_count(__io_address(UX500_SCU_BASE));
 }
 static DEFINE_SPINLOCK(boot_lock);
@@ -44,7 +44,7 @@ void __cpuinit platform_secondary_init(unsigned int cpu)
         * core (e.g. timer irq), then they will not have been enabled
         * for us: do so
         */
-        gic_cpu_init(0, __io_address(U8500_GIC_CPU_BASE));
+        gic_cpu_init(0, __io_address(UX500_GIC_CPU_BASE));
        /*
         * let the primary processor know we're out of the
@@ -75,7 +75,8 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
         * that it has been released by resetting pen_release.
         */
        pen_release = cpu;
-        flush_cache_all();
+        __cpuc_flush_dcache_area((void *)&pen_release, sizeof(pen_release));
+        outer_clean_range(__pa(&pen_release), __pa(&pen_release) + 1);
        timeout = jiffies + (1 * HZ);
        while (time_before(jiffies, timeout)) {
@@ -105,12 +106,12 @@ static void __init wakeup_secondary(void)
         */
 #define U8500_CPU1_JUMPADDR_OFFSET 0x1FF4
        __raw_writel(virt_to_phys(u8500_secondary_startup),
-                (void __iomem *)IO_ADDRESS(U8500_BACKUPRAM0_BASE) +
+                __io_address(UX500_BACKUPRAM0_BASE) +
                U8500_CPU1_JUMPADDR_OFFSET);
 #define U8500_CPU1_WAKEMAGIC_OFFSET 0x1FF0
        __raw_writel(0xA1FEED01,
-                (void __iomem *)IO_ADDRESS(U8500_BACKUPRAM0_BASE) +
+                __io_address(UX500_BACKUPRAM0_BASE) +
                U8500_CPU1_WAKEMAGIC_OFFSET);
        /* make sure write buffer is drained */
@@ -171,7 +172,7 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
                 * boot CPU, but only if we have more than one CPU.
                 */
                percpu_timer_setup();
-                scu_enable(__io_address(U8500_SCU_BASE));
+                scu_enable(__io_address(UX500_SCU_BASE));
                wakeup_secondary();
        }
 }
diff --git a/arch/arm/mach-versatile/Makefile b/arch/arm/mach-versatile/Makefile
index ba81e70ed813..97cf4d831b0c 100644
--- a/arch/arm/mach-versatile/Makefile
+++ b/arch/arm/mach-versatile/Makefile
@@ -2,7 +2,7 @@
 # Makefile for the linux kernel.
 #
-obj-y                                   := core.o clock.o
+obj-y                                   := core.o
 obj-$(CONFIG_ARCH_VERSATILE_PB)         += versatile_pb.o
 obj-$(CONFIG_MACH_VERSATILE_AB)         += versatile_ab.o
 obj-$(CONFIG_PCI)                       += pci.o
diff --git a/arch/arm/mach-versatile/clock.c b/arch/arm/mach-versatile/clock.c
deleted file mode 100644
index c50a44ea7ee6..000000000000
--- a/arch/arm/mach-versatile/clock.c
+++ /dev/null
@@ -1,65 +0,0 @@
-/*
- *  linux/arch/arm/mach-versatile/clock.c
- *
- *  Copyright (C) 2004 ARM Limited.
- *  Written by Deep Blue Solutions Limited.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/device.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/string.h>
-#include <linux/clk.h>
-#include <linux/mutex.h>
-#include <asm/clkdev.h>
-#include <asm/hardware/icst307.h>
-#include "clock.h"
-int clk_enable(struct clk *clk)
-{
-        return 0;
-}
-EXPORT_SYMBOL(clk_enable);
-void clk_disable(struct clk *clk)
-{
-}
-EXPORT_SYMBOL(clk_disable);
-unsigned long clk_get_rate(struct clk *clk)
-{
-        return clk->rate;
-}
-EXPORT_SYMBOL(clk_get_rate);
-long clk_round_rate(struct clk *clk, unsigned long rate)
-{
-        struct icst307_vco vco;
-        vco = icst307_khz_to_vco(clk->params, rate / 1000);
-        return icst307_khz(clk->params, vco) * 1000;
-}
-EXPORT_SYMBOL(clk_round_rate);
-int clk_set_rate(struct clk *clk, unsigned long rate)
-{
-        int ret = -EIO;
-        if (clk->setvco) {
-                struct icst307_vco vco;
-                vco = icst307_khz_to_vco(clk->params, rate / 1000);
-                clk->rate = icst307_khz(clk->params, vco) * 1000;
-                clk->setvco(clk, vco);
-                ret = 0;
-        }
-        return ret;
-}
-EXPORT_SYMBOL(clk_set_rate);
diff --git a/arch/arm/mach-versatile/clock.h b/arch/arm/mach-versatile/clock.h
deleted file mode 100644
index 03468fdc3e58..000000000000
--- a/arch/arm/mach-versatile/clock.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- *  linux/arch/arm/mach-versatile/clock.h
- *
- *  Copyright (C) 2004 ARM Limited.
- *  Written by Deep Blue Solutions Limited.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-struct module;
-struct icst307_params;
-struct clk {
-        unsigned long           rate;
-        const struct icst307_params *params;
-        u32                     oscoff;
-        void                    *data;
-        void                    (*setvco)(struct clk *, struct icst307_vco vco);
-};
diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c
index 9ddb49b1cb71..60baba65635e 100644
--- a/arch/arm/mach-versatile/core.c
+++ b/arch/arm/mach-versatile/core.c
@@ -28,18 +28,14 @@
 #include <linux/amba/clcd.h>
 #include <linux/amba/pl061.h>
 #include <linux/amba/mmci.h>
-#include <linux/clocksource.h>
-#include <linux/clockchips.h>
-#include <linux/cnt32_to_63.h>
 #include <linux/io.h>
 #include <asm/clkdev.h>
 #include <asm/system.h>
-#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/leds.h>
 #include <asm/hardware/arm_timer.h>
-#include <asm/hardware/icst307.h>
+#include <asm/hardware/icst.h>
 #include <asm/hardware/vic.h>
 #include <asm/mach-types.h>
@@ -48,9 +44,12 @@
 #include <asm/mach/irq.h>
 #include <asm/mach/time.h>
 #include <asm/mach/map.h>
+#include <mach/clkdev.h>
+#include <mach/hardware.h>
+#include <mach/platform.h>
+#include <plat/timer-sp.h>
 #include "core.h"
-#include "clock.h"
 /*
 * All IO addresses are mapped onto VA 0xFFFx.xxxx, where x.xxxx
@@ -58,7 +57,6 @@
 *
 * Setup a VA for the Versatile Vectored Interrupt Controller.
 */
-#define __io_address(n)         __io(IO_ADDRESS(n))
 #define VA_VIC_BASE             __io_address(VERSATILE_VIC_BASE)
 #define VA_SIC_BASE             __io_address(VERSATILE_SIC_BASE)
@@ -228,27 +226,6 @@ void __init versatile_map_io(void)
        iotable_init(versatile_io_desc, ARRAY_SIZE(versatile_io_desc));
 }
-#define VERSATILE_REFCOUNTER    (__io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_24MHz_OFFSET)
-/*
- * This is the Versatile sched_clock implementation.  This has
- * a resolution of 41.7ns, and a maximum value of about 35583 days.
- *
- * The return value is guaranteed to be monotonic in that range as
- * long as there is always less than 89 seconds between successive
- * calls to this function.
- */
-unsigned long long sched_clock(void)
-{
-        unsigned long long v = cnt32_to_63(readl(VERSATILE_REFCOUNTER));
-        /* the <<1 gets rid of the cnt_32_to_63 top bit saving on a bic insn */
-        v *= 125<<1;
-        do_div(v, 3<<1);
-        return v;
-}
 #define VERSATILE_FLASHCTRL    (__io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_FLASH_OFFSET)
@@ -379,33 +356,40 @@ static struct mmci_platform_data mmc0_plat_data = {
 /*
 * Clock handling
 */
-static const struct icst307_params versatile_oscvco_params = {
+static const struct icst_params versatile_oscvco_params = {
-        .ref            = 24000,
+        .ref            = 24000000,
-        .vco_max        = 200000,
+        .vco_max        = ICST307_VCO_MAX,
+        .vco_min        = ICST307_VCO_MIN,
        .vd_min         = 4 + 8,
        .vd_max         = 511 + 8,
        .rd_min         = 1 + 2,
        .rd_max         = 127 + 2,
+        .s2div          = icst307_s2div,
+        .idx2s          = icst307_idx2s,
 };
-static void versatile_oscvco_set(struct clk *clk, struct icst307_vco vco)
+static void versatile_oscvco_set(struct clk *clk, struct icst_vco vco)
 {
-        void __iomem *sys = __io_address(VERSATILE_SYS_BASE);
+        void __iomem *sys_lock = __io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_LOCK_OFFSET;
-        void __iomem *sys_lock = sys + VERSATILE_SYS_LOCK_OFFSET;
        u32 val;
-        val = readl(sys + clk->oscoff) & ~0x7ffff;
+        val = readl(clk->vcoreg) & ~0x7ffff;
        val |= vco.v | (vco.r << 9) | (vco.s << 16);
        writel(0xa05f, sys_lock);
-        writel(val, sys + clk->oscoff);
+        writel(val, clk->vcoreg);
        writel(0, sys_lock);
 }
+static const struct clk_ops osc4_clk_ops = {
+        .round  = icst_clk_round,
+        .set    = icst_clk_set,
+        .setvco = versatile_oscvco_set,
+};
 static struct clk osc4_clk = {
+        .ops    = &osc4_clk_ops,
        .params = &versatile_oscvco_params,
-        .oscoff = VERSATILE_SYS_OSCCLCD_OFFSET,
-        .setvco = versatile_oscvco_set,
 };
 /*
@@ -851,6 +835,8 @@ void __init versatile_init(void)
 {
        int i;
+        osc4_clk.vcoreg = __io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_OSCCLCD_OFFSET;
        clkdev_add_table(lookups, ARRAY_SIZE(lookups));
        platform_device_register(&versatile_flash_device);
@@ -874,120 +860,6 @@ void __init versatile_init(void)
 #define TIMER1_VA_BASE          (__io_address(VERSATILE_TIMER0_1_BASE) + 0x20)
 #define TIMER2_VA_BASE           __io_address(VERSATILE_TIMER2_3_BASE)
 #define TIMER3_VA_BASE          (__io_address(VERSATILE_TIMER2_3_BASE) + 0x20)
-#define VA_IC_BASE               __io_address(VERSATILE_VIC_BASE) 
-/*
- * How long is the timer interval?
- */
-#define TIMER_INTERVAL  (TICKS_PER_uSEC * mSEC_10)
-#if TIMER_INTERVAL >= 0x100000
-#define TIMER_RELOAD    (TIMER_INTERVAL >> 8)
-#define TIMER_DIVISOR   (TIMER_CTRL_DIV256)
-#define TICKS2USECS(x)  (256 * (x) / TICKS_PER_uSEC)
-#elif TIMER_INTERVAL >= 0x10000
-#define TIMER_RELOAD    (TIMER_INTERVAL >> 4)           /* Divide by 16 */
-#define TIMER_DIVISOR   (TIMER_CTRL_DIV16)
-#define TICKS2USECS(x)  (16 * (x) / TICKS_PER_uSEC)
-#else
-#define TIMER_RELOAD    (TIMER_INTERVAL)
-#define TIMER_DIVISOR   (TIMER_CTRL_DIV1)
-#define TICKS2USECS(x)  ((x) / TICKS_PER_uSEC)
-#endif
-static void timer_set_mode(enum clock_event_mode mode,
-                           struct clock_event_device *clk)
-{
-        unsigned long ctrl;
-        switch(mode) {
-        case CLOCK_EVT_MODE_PERIODIC:
-                writel(TIMER_RELOAD, TIMER0_VA_BASE + TIMER_LOAD);
-                ctrl = TIMER_CTRL_PERIODIC;
-                ctrl |= TIMER_CTRL_32BIT | TIMER_CTRL_IE | TIMER_CTRL_ENABLE;
-                break;
-        case CLOCK_EVT_MODE_ONESHOT:
-                /* period set, and timer enabled in 'next_event' hook */
-                ctrl = TIMER_CTRL_ONESHOT;
-                ctrl |= TIMER_CTRL_32BIT | TIMER_CTRL_IE;
-                break;
-        case CLOCK_EVT_MODE_UNUSED:
-        case CLOCK_EVT_MODE_SHUTDOWN:
-        default:
-                ctrl = 0;
-        }
-        writel(ctrl, TIMER0_VA_BASE + TIMER_CTRL);
-}
-static int timer_set_next_event(unsigned long evt,
-                                struct clock_event_device *unused)
-{
-        unsigned long ctrl = readl(TIMER0_VA_BASE + TIMER_CTRL);
-        writel(evt, TIMER0_VA_BASE + TIMER_LOAD);
-        writel(ctrl | TIMER_CTRL_ENABLE, TIMER0_VA_BASE + TIMER_CTRL);
-        return 0;
-}
-static struct clock_event_device timer0_clockevent =     {
-        .name           = "timer0",
-        .shift          = 32,
-        .features       = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
-        .set_mode       = timer_set_mode,
-        .set_next_event = timer_set_next_event,
-};
-/*
- * IRQ handler for the timer
- */
-static irqreturn_t versatile_timer_interrupt(int irq, void *dev_id)
-{
-        struct clock_event_device *evt = &timer0_clockevent;
-        writel(1, TIMER0_VA_BASE + TIMER_INTCLR);
-        evt->event_handler(evt);
-        return IRQ_HANDLED;
-}
-static struct irqaction versatile_timer_irq = {
-        .name           = "Versatile Timer Tick",
-        .flags          = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
-        .handler        = versatile_timer_interrupt,
-};
-static cycle_t versatile_get_cycles(struct clocksource *cs)
-{
-        return ~readl(TIMER3_VA_BASE + TIMER_VALUE);
-}
-static struct clocksource clocksource_versatile = {
-        .name           = "timer3",
-        .rating         = 200,
-        .read           = versatile_get_cycles,
-        .mask           = CLOCKSOURCE_MASK(32),
-        .shift          = 20,
-        .flags          = CLOCK_SOURCE_IS_CONTINUOUS,
-};
-static int __init versatile_clocksource_init(void)
-{
-        /* setup timer3 as free-running clocksource */
-        writel(0, TIMER3_VA_BASE + TIMER_CTRL);
-        writel(0xffffffff, TIMER3_VA_BASE + TIMER_LOAD);
-        writel(0xffffffff, TIMER3_VA_BASE + TIMER_VALUE);
-        writel(TIMER_CTRL_32BIT | TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC,
-               TIMER3_VA_BASE + TIMER_CTRL);
-        clocksource_versatile.mult =
-                clocksource_khz2mult(1000, clocksource_versatile.shift);
-        clocksource_register(&clocksource_versatile);
-        return 0;
-}
 /*
 * Set up timer interrupt, and return the current time in seconds.
@@ -1016,22 +888,8 @@ static void __init versatile_timer_init(void)
        writel(0, TIMER2_VA_BASE + TIMER_CTRL);
        writel(0, TIMER3_VA_BASE + TIMER_CTRL);
-        /* 
+        sp804_clocksource_init(TIMER3_VA_BASE);
-         * Make irqs happen for the system timer
+        sp804_clockevents_init(TIMER0_VA_BASE, IRQ_TIMERINT0_1);
-         */
-        setup_irq(IRQ_TIMERINT0_1, &versatile_timer_irq);
-        versatile_clocksource_init();
-        timer0_clockevent.mult =
-                div_sc(1000000, NSEC_PER_SEC, timer0_clockevent.shift);
-        timer0_clockevent.max_delta_ns =
-                clockevent_delta2ns(0xffffffff, &timer0_clockevent);
-        timer0_clockevent.min_delta_ns =
-                clockevent_delta2ns(0xf, &timer0_clockevent);
-        timer0_clockevent.cpumask = cpumask_of(0);
-        clockevents_register_device(&timer0_clockevent);
 }
 struct sys_timer versatile_timer = {
diff --git a/arch/arm/mach-versatile/include/mach/clkdev.h b/arch/arm/mach-versatile/include/mach/clkdev.h
index 04b37a89801c..e58d0771b64e 100644
--- a/arch/arm/mach-versatile/include/mach/clkdev.h
+++ b/arch/arm/mach-versatile/include/mach/clkdev.h
@@ -1,6 +1,15 @@
 #ifndef __ASM_MACH_CLKDEV_H
 #define __ASM_MACH_CLKDEV_H
+#include <plat/clock.h>
+struct clk {
+        unsigned long           rate;
+        const struct clk_ops    *ops;
+        const struct icst_params *params;
+        void __iomem            *vcoreg;
+};
 #define __clk_get(clk) ({ 1; })
 #define __clk_put(clk) do { } while (0)
diff --git a/arch/arm/mach-versatile/include/mach/entry-macro.S b/arch/arm/mach-versatile/include/mach/entry-macro.S
index 8c8020980585..e6f7c1663160 100644
--- a/arch/arm/mach-versatile/include/mach/entry-macro.S
+++ b/arch/arm/mach-versatile/include/mach/entry-macro.S
@@ -8,6 +8,7 @@
 * warranty of any kind, whether express or implied.
 */
 #include <mach/hardware.h>
+#include <mach/platform.h>
 #include <asm/hardware/vic.h>
                .macro  disable_fiq
diff --git a/arch/arm/mach-versatile/include/mach/hardware.h b/arch/arm/mach-versatile/include/mach/hardware.h
index 7aa906c93154..4f8f99aac938 100644
--- a/arch/arm/mach-versatile/include/mach/hardware.h
+++ b/arch/arm/mach-versatile/include/mach/hardware.h
@@ -23,7 +23,6 @@
 #define __ASM_ARCH_HARDWARE_H
 #include <asm/sizes.h>
-#include <mach/platform.h>
 /*
 * PCI space virtual addresses
@@ -49,4 +48,6 @@
 /* macro to get at IO space when running virtually */
 #define IO_ADDRESS(x)           (((x) & 0x0fffffff) + (((x) >> 4) & 0x0f000000) + 0xf0000000)
+#define __io_address(n)         __io(IO_ADDRESS(n))
 #endif
diff --git a/arch/arm/mach-versatile/include/mach/platform.h b/arch/arm/mach-versatile/include/mach/platform.h
index 83207395191a..ec087407b163 100644
--- a/arch/arm/mach-versatile/include/mach/platform.h
+++ b/arch/arm/mach-versatile/include/mach/platform.h
@@ -205,7 +205,7 @@
 #define VERSATILE_CLCD_BASE            0x10120000       /* CLCD */
 #define VERSATILE_DMAC_BASE            0x10130000       /* DMA controller */
 #define VERSATILE_VIC_BASE             0x10140000       /* Vectored interrupt controller */
-#define VERSATILE_PERIPH_BASE          0x10150000    /* off-chip peripherals alias from */
+#define VERSATILE_PERIPH_BASE          0x10150000       /* off-chip peripherals alias from */
                                                /* 0x10000000 - 0x100FFFFF */
 #define VERSATILE_AHBM_BASE            0x101D0000       /* AHB monitor */
 #define VERSATILE_SCTL_BASE            0x101E0000       /* System controller */
@@ -213,7 +213,7 @@
 #define VERSATILE_TIMER0_1_BASE        0x101E2000       /* Timer 0 and 1 */
 #define VERSATILE_TIMER2_3_BASE        0x101E3000       /* Timer 2 and 3 */
 #define VERSATILE_GPIO0_BASE           0x101E4000       /* GPIO port 0 */
-#define VERSATILE_GPIO1_BASE           0x101E5000    /* GPIO port 1 */
+#define VERSATILE_GPIO1_BASE           0x101E5000       /* GPIO port 1 */
 #define VERSATILE_GPIO2_BASE           0x101E6000       /* GPIO port 2 */
 #define VERSATILE_GPIO3_BASE           0x101E7000       /* GPIO port 3 */
 #define VERSATILE_RTC_BASE             0x101E8000       /* Real Time Clock */
@@ -379,12 +379,6 @@
 #define SIC_INT_PCI3                    30
-/* 
- *  Clean base - dummy
- * 
- */
-#define CLEAN_BASE                      VERSATILE_BOOT_ROM_HI
 /*
 * System controller bit assignment
 */
@@ -397,20 +391,6 @@
 #define VERSATILE_TIMER4_EnSel  21
-#define MAX_TIMER                       2
-#define MAX_PERIOD                      699050
-#define TICKS_PER_uSEC                  1
-/* 
- *  These are useconds NOT ticks.  
- * 
- */
-#define mSEC_1                          1000
-#define mSEC_5                          (mSEC_1 * 5)
-#define mSEC_10                         (mSEC_1 * 10)
-#define mSEC_25                         (mSEC_1 * 25)
-#define SEC_1                           (mSEC_1 * 1000)
 #define VERSATILE_CSR_BASE             0x10000000
 #define VERSATILE_CSR_SIZE             0x10000000
@@ -432,5 +412,3 @@
 #endif
 #endif
-/*      END */
diff --git a/arch/arm/mach-vexpress/Kconfig b/arch/arm/mach-vexpress/Kconfig
new file mode 100644
index 000000000000..3f19b660a165
--- /dev/null
+++ b/arch/arm/mach-vexpress/Kconfig
@@ -0,0 +1,9 @@
+menu "Versatile Express platform type"
+        depends on ARCH_VEXPRESS
+config ARCH_VEXPRESS_CA9X4
+        bool "Versatile Express Cortex-A9x4 tile"
+        select CPU_V7
+        select ARM_GIC
+endmenu
diff --git a/arch/arm/mach-vexpress/Makefile b/arch/arm/mach-vexpress/Makefile
new file mode 100644
index 000000000000..1b71b77ade22
--- /dev/null
+++ b/arch/arm/mach-vexpress/Makefile
@@ -0,0 +1,8 @@
+#
+# Makefile for the linux kernel.
+#
+obj-y                                   := v2m.o
+obj-$(CONFIG_ARCH_VEXPRESS_CA9X4)       += ct-ca9x4.o
+obj-$(CONFIG_SMP)                       += platsmp.o headsmp.o
+obj-$(CONFIG_LOCAL_TIMERS)              += localtimer.o
diff --git a/arch/arm/mach-vexpress/Makefile.boot b/arch/arm/mach-vexpress/Makefile.boot
new file mode 100644
index 000000000000..07c2d9c457ec
--- /dev/null
+++ b/arch/arm/mach-vexpress/Makefile.boot
@@ -0,0 +1,3 @@
+   zreladdr-y   := 0x60008000
+params_phys-y   := 0x60000100
+initrd_phys-y   := 0x60800000
diff --git a/arch/arm/mach-vexpress/core.h b/arch/arm/mach-vexpress/core.h
new file mode 100644
index 000000000000..57dd95ce41f9
--- /dev/null
+++ b/arch/arm/mach-vexpress/core.h
@@ -0,0 +1,26 @@
+#define __MMIO_P2V(x)   (((x) & 0xfffff) | (((x) & 0x0f000000) >> 4) | 0xf8000000)
+#define MMIO_P2V(x)     ((void __iomem *)__MMIO_P2V(x))
+#define AMBA_DEVICE(name,busid,base,plat)       \
+struct amba_device name##_device = {            \
+        .dev            = {                     \
+                .coherent_dma_mask = ~0UL,      \
+                .init_name = busid,             \
+                .platform_data = plat,          \
+        },                                      \
+        .res            = {                     \
+                .start  = base,                 \
+                .end    = base + SZ_4K - 1,     \
+                .flags  = IORESOURCE_MEM,       \
+        },                                      \
+        .dma_mask       = ~0UL,                 \
+        .irq            = IRQ_##base,           \
+        /* .dma         = DMA_##base,*/         \
+}
+struct map_desc;
+void v2m_map_io(struct map_desc *tile, size_t num);
+extern struct sys_timer v2m_timer;
+extern void __iomem *gic_cpu_base_addr;
diff --git a/arch/arm/mach-vexpress/ct-ca9x4.c b/arch/arm/mach-vexpress/ct-ca9x4.c
new file mode 100644
index 000000000000..e6f73030d5f0
--- /dev/null
+++ b/arch/arm/mach-vexpress/ct-ca9x4.c
@@ -0,0 +1,249 @@
+/*
+ * Versatile Express Core Tile Cortex A9x4 Support
+ */
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
+#include <linux/amba/bus.h>
+#include <linux/amba/clcd.h>
+#include <asm/clkdev.h>
+#include <asm/hardware/arm_timer.h>
+#include <asm/hardware/cache-l2x0.h>
+#include <asm/hardware/gic.h>
+#include <asm/mach-types.h>
+#include <asm/pmu.h>
+#include <mach/clkdev.h>
+#include <mach/ct-ca9x4.h>
+#include <plat/timer-sp.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/time.h>
+#include "core.h"
+#include <mach/motherboard.h>
+#define V2M_PA_CS7      0x10000000
+static struct map_desc ct_ca9x4_io_desc[] __initdata = {
+        {
+                .virtual        = __MMIO_P2V(CT_CA9X4_MPIC),
+                .pfn            = __phys_to_pfn(CT_CA9X4_MPIC),
+                .length         = SZ_16K,
+                .type           = MT_DEVICE,
+        }, {
+                .virtual        = __MMIO_P2V(CT_CA9X4_SP804_TIMER),
+                .pfn            = __phys_to_pfn(CT_CA9X4_SP804_TIMER),
+                .length         = SZ_4K,
+                .type           = MT_DEVICE,
+        }, {
+                .virtual        = __MMIO_P2V(CT_CA9X4_L2CC),
+                .pfn            = __phys_to_pfn(CT_CA9X4_L2CC),
+                .length         = SZ_4K,
+                .type           = MT_DEVICE,
+        },
+};
+static void __init ct_ca9x4_map_io(void)
+{
+        v2m_map_io(ct_ca9x4_io_desc, ARRAY_SIZE(ct_ca9x4_io_desc));
+}
+void __iomem *gic_cpu_base_addr;
+static void __init ct_ca9x4_init_irq(void)
+{
+        gic_cpu_base_addr = MMIO_P2V(A9_MPCORE_GIC_CPU);
+        gic_dist_init(0, MMIO_P2V(A9_MPCORE_GIC_DIST), 29);
+        gic_cpu_init(0, gic_cpu_base_addr);
+}
+#if 0
+static void ct_ca9x4_timer_init(void)
+{
+        writel(0, MMIO_P2V(CT_CA9X4_TIMER0) + TIMER_CTRL);
+        writel(0, MMIO_P2V(CT_CA9X4_TIMER1) + TIMER_CTRL);
+        sp804_clocksource_init(MMIO_P2V(CT_CA9X4_TIMER1));
+        sp804_clockevents_init(MMIO_P2V(CT_CA9X4_TIMER0), IRQ_CT_CA9X4_TIMER0);
+}
+static struct sys_timer ct_ca9x4_timer = {
+        .init   = ct_ca9x4_timer_init,
+};
+#endif
+static struct clcd_panel xvga_panel = {
+        .mode           = {
+                .name           = "XVGA",
+                .refresh        = 60,
+                .xres           = 1024,
+                .yres           = 768,
+                .pixclock       = 15384,
+                .left_margin    = 168,
+                .right_margin   = 8,
+                .upper_margin   = 29,
+                .lower_margin   = 3,
+                .hsync_len      = 144,
+                .vsync_len      = 6,
+                .sync           = 0,
+                .vmode          = FB_VMODE_NONINTERLACED,
+        },
+        .width          = -1,
+        .height         = -1,
+        .tim2           = TIM2_BCD | TIM2_IPC,
+        .cntl           = CNTL_LCDTFT | CNTL_BGR | CNTL_LCDVCOMP(1),
+        .bpp            = 16,
+};
+static void ct_ca9x4_clcd_enable(struct clcd_fb *fb)
+{
+        v2m_cfg_write(SYS_CFG_MUXFPGA | SYS_CFG_SITE_DB1, 0);
+        v2m_cfg_write(SYS_CFG_DVIMODE | SYS_CFG_SITE_DB1, 2);
+}
+static int ct_ca9x4_clcd_setup(struct clcd_fb *fb)
+{
+        unsigned long framesize = 1024 * 768 * 2;
+        dma_addr_t dma;
+        fb->panel = &xvga_panel;
+        fb->fb.screen_base = dma_alloc_writecombine(&fb->dev->dev, framesize,
+                                &dma, GFP_KERNEL);
+        if (!fb->fb.screen_base) {
+                printk(KERN_ERR "CLCD: unable to map frame buffer\n");
+                return -ENOMEM;
+        }
+        fb->fb.fix.smem_start = dma;
+        fb->fb.fix.smem_len = framesize;
+        return 0;
+}
+static int ct_ca9x4_clcd_mmap(struct clcd_fb *fb, struct vm_area_struct *vma)
+{
+        return dma_mmap_writecombine(&fb->dev->dev, vma, fb->fb.screen_base,
+                fb->fb.fix.smem_start, fb->fb.fix.smem_len);
+}
+static void ct_ca9x4_clcd_remove(struct clcd_fb *fb)
+{
+        dma_free_writecombine(&fb->dev->dev, fb->fb.fix.smem_len,
+                fb->fb.screen_base, fb->fb.fix.smem_start);
+}
+static struct clcd_board ct_ca9x4_clcd_data = {
+        .name           = "CT-CA9X4",
+        .check          = clcdfb_check,
+        .decode         = clcdfb_decode,
+        .enable         = ct_ca9x4_clcd_enable,
+        .setup          = ct_ca9x4_clcd_setup,
+        .mmap           = ct_ca9x4_clcd_mmap,
+        .remove         = ct_ca9x4_clcd_remove,
+};
+static AMBA_DEVICE(clcd, "ct:clcd", CT_CA9X4_CLCDC, &ct_ca9x4_clcd_data);
+static AMBA_DEVICE(dmc, "ct:dmc", CT_CA9X4_DMC, NULL);
+static AMBA_DEVICE(smc, "ct:smc", CT_CA9X4_SMC, NULL);
+static AMBA_DEVICE(gpio, "ct:gpio", CT_CA9X4_GPIO, NULL);
+static struct amba_device *ct_ca9x4_amba_devs[] __initdata = {
+        &clcd_device,
+        &dmc_device,
+        &smc_device,
+        &gpio_device,
+};
+static long ct_round(struct clk *clk, unsigned long rate)
+{
+        return rate;
+}
+static int ct_set(struct clk *clk, unsigned long rate)
+{
+        return v2m_cfg_write(SYS_CFG_OSC | SYS_CFG_SITE_DB1 | 1, rate);
+}
+static const struct clk_ops osc1_clk_ops = {
+        .round  = ct_round,
+        .set    = ct_set,
+};
+static struct clk osc1_clk = {
+        .ops    = &osc1_clk_ops,
+        .rate   = 24000000,
+};
+static struct clk_lookup lookups[] = {
+        {       /* CLCD */
+                .dev_id         = "ct:clcd",
+                .clk            = &osc1_clk,
+        },
+};
+static struct resource pmu_resources[] = {
+        [0] = {
+                .start  = IRQ_CT_CA9X4_PMU_CPU0,
+                .end    = IRQ_CT_CA9X4_PMU_CPU0,
+                .flags  = IORESOURCE_IRQ,
+        },
+        [1] = {
+                .start  = IRQ_CT_CA9X4_PMU_CPU1,
+                .end    = IRQ_CT_CA9X4_PMU_CPU1,
+                .flags  = IORESOURCE_IRQ,
+        },
+        [2] = {
+                .start  = IRQ_CT_CA9X4_PMU_CPU2,
+                .end    = IRQ_CT_CA9X4_PMU_CPU2,
+                .flags  = IORESOURCE_IRQ,
+        },
+        [3] = {
+                .start  = IRQ_CT_CA9X4_PMU_CPU3,
+                .end    = IRQ_CT_CA9X4_PMU_CPU3,
+                .flags  = IORESOURCE_IRQ,
+        },
+};
+static struct platform_device pmu_device = {
+        .name           = "arm-pmu",
+        .id             = ARM_PMU_DEVICE_CPU,
+        .num_resources  = ARRAY_SIZE(pmu_resources),
+        .resource       = pmu_resources,
+};
+static void ct_ca9x4_init(void)
+{
+        int i;
+#ifdef CONFIG_CACHE_L2X0
+        l2x0_init(MMIO_P2V(CT_CA9X4_L2CC), 0x00000000, 0xfe0fffff);
+#endif
+        clkdev_add_table(lookups, ARRAY_SIZE(lookups));
+        for (i = 0; i < ARRAY_SIZE(ct_ca9x4_amba_devs); i++)
+                amba_device_register(ct_ca9x4_amba_devs[i], &iomem_resource);
+        platform_device_register(&pmu_device);
+}
+MACHINE_START(VEXPRESS, "ARM-Versatile Express CA9x4")
+        .phys_io        = V2M_UART0,
+        .io_pg_offst    = (__MMIO_P2V(V2M_UART0) >> 18) & 0xfffc,
+        .boot_params    = PHYS_OFFSET + 0x00000100,
+        .map_io         = ct_ca9x4_map_io,
+        .init_irq       = ct_ca9x4_init_irq,
+#if 0
+        .timer          = &ct_ca9x4_timer,
+#else
+        .timer          = &v2m_timer,
+#endif
+        .init_machine   = ct_ca9x4_init,
+MACHINE_END
diff --git a/arch/arm/mach-vexpress/headsmp.S b/arch/arm/mach-vexpress/headsmp.S
new file mode 100644
index 000000000000..8a78ff68e1ee
--- /dev/null
+++ b/arch/arm/mach-vexpress/headsmp.S
@@ -0,0 +1,39 @@
+/*
+ *  linux/arch/arm/mach-vexpress/headsmp.S
+ *
+ *  Copyright (c) 2003 ARM Limited
+ *  All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/linkage.h>
+#include <linux/init.h>
+        __INIT
+/*
+ * Versatile Express specific entry point for secondary CPUs.  This
+ * provides a "holding pen" into which all secondary cores are held
+ * until we're ready for them to initialise.
+ */
+ENTRY(vexpress_secondary_startup)
+        mrc     p15, 0, r0, c0, c0, 5
+        and     r0, r0, #15
+        adr     r4, 1f
+        ldmia   r4, {r5, r6}
+        sub     r4, r4, r5
+        add     r6, r6, r4
+pen:    ldr     r7, [r6]
+        cmp     r7, r0
+        bne     pen
+        /*
+         * we've been released from the holding pen: secondary_stack
+         * should now contain the SVC stack for this core
+         */
+        b       secondary_startup
+1:      .long   .
+        .long   pen_release
diff --git a/arch/arm/mach-vexpress/include/mach/clkdev.h b/arch/arm/mach-vexpress/include/mach/clkdev.h
new file mode 100644
index 000000000000..3f8307d73cad
--- /dev/null
+++ b/arch/arm/mach-vexpress/include/mach/clkdev.h
@@ -0,0 +1,15 @@
+#ifndef __ASM_MACH_CLKDEV_H
+#define __ASM_MACH_CLKDEV_H
+#include <plat/clock.h>
+struct clk {
+        const struct clk_ops    *ops;
+        unsigned long           rate;
+        const struct icst_params *params;
+};
+#define __clk_get(clk) ({ 1; })
+#define __clk_put(clk) do { } while (0)
+#endif
diff --git a/arch/arm/mach-vexpress/include/mach/ct-ca9x4.h b/arch/arm/mach-vexpress/include/mach/ct-ca9x4.h
new file mode 100644
index 000000000000..8650f04136ef
--- /dev/null
+++ b/arch/arm/mach-vexpress/include/mach/ct-ca9x4.h
@@ -0,0 +1,47 @@
+#ifndef __MACH_CT_CA9X4_H
+#define __MACH_CT_CA9X4_H
+/*
+ * Physical base addresses
+ */
+#define CT_CA9X4_CLCDC          (0x10020000)
+#define CT_CA9X4_AXIRAM         (0x10060000)
+#define CT_CA9X4_DMC            (0x100e0000)
+#define CT_CA9X4_SMC            (0x100e1000)
+#define CT_CA9X4_SCC            (0x100e2000)
+#define CT_CA9X4_SP804_TIMER    (0x100e4000)
+#define CT_CA9X4_SP805_WDT      (0x100e5000)
+#define CT_CA9X4_TZPC           (0x100e6000)
+#define CT_CA9X4_GPIO           (0x100e8000)
+#define CT_CA9X4_FASTAXI        (0x100e9000)
+#define CT_CA9X4_SLOWAXI        (0x100ea000)
+#define CT_CA9X4_TZASC          (0x100ec000)
+#define CT_CA9X4_CORESIGHT      (0x10200000)
+#define CT_CA9X4_MPIC           (0x1e000000)
+#define CT_CA9X4_SYSTIMER       (0x1e004000)
+#define CT_CA9X4_SYSWDT         (0x1e007000)
+#define CT_CA9X4_L2CC           (0x1e00a000)
+#define CT_CA9X4_TIMER0         (CT_CA9X4_SP804_TIMER + 0x000)
+#define CT_CA9X4_TIMER1         (CT_CA9X4_SP804_TIMER + 0x020)
+#define A9_MPCORE_SCU           (CT_CA9X4_MPIC + 0x0000)
+#define A9_MPCORE_GIC_CPU       (CT_CA9X4_MPIC + 0x0100)
+#define A9_MPCORE_GIT           (CT_CA9X4_MPIC + 0x0200)
+#define A9_MPCORE_GIC_DIST      (CT_CA9X4_MPIC + 0x1000)
+/*
+ * Interrupts.  Those in {} are for AMBA devices
+ */
+#define IRQ_CT_CA9X4_CLCDC      { 76 }
+#define IRQ_CT_CA9X4_DMC        { -1 }
+#define IRQ_CT_CA9X4_SMC        { 77, 78 }
+#define IRQ_CT_CA9X4_TIMER0     80
+#define IRQ_CT_CA9X4_TIMER1     81
+#define IRQ_CT_CA9X4_GPIO       { 82 }
+#define IRQ_CT_CA9X4_PMU_CPU0   92
+#define IRQ_CT_CA9X4_PMU_CPU1   93
+#define IRQ_CT_CA9X4_PMU_CPU2   94
+#define IRQ_CT_CA9X4_PMU_CPU3   95
+#endif
diff --git a/arch/arm/mach-vexpress/include/mach/debug-macro.S b/arch/arm/mach-vexpress/include/mach/debug-macro.S
new file mode 100644
index 000000000000..5167e2aceeba
--- /dev/null
+++ b/arch/arm/mach-vexpress/include/mach/debug-macro.S
@@ -0,0 +1,23 @@
+/* arch/arm/mach-realview/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#define DEBUG_LL_UART_OFFSET    0x00009000
+                .macro  addruart,rx,tmp
+                mrc     p15, 0, \rx, c1, c0
+                tst     \rx, #1                 @ MMU enabled?
+                moveq   \rx,      #0x10000000
+                movne   \rx,      #0xf8000000   @ virtual base
+                orr     \rx, \rx, #DEBUG_LL_UART_OFFSET
+                .endm
+#include <asm/hardware/debug-pl01x.S>
diff --git a/arch/arm/mach-vexpress/include/mach/entry-macro.S b/arch/arm/mach-vexpress/include/mach/entry-macro.S
new file mode 100644
index 000000000000..20e9fb514f0a
--- /dev/null
+++ b/arch/arm/mach-vexpress/include/mach/entry-macro.S
@@ -0,0 +1,67 @@
+#include <asm/hardware/gic.h>
+        .macro  disable_fiq
+        .endm
+        .macro  get_irqnr_preamble, base, tmp
+        ldr     \base, =gic_cpu_base_addr
+        ldr     \base, [\base]
+        .endm
+        .macro  arch_ret_to_user, tmp1, tmp2
+        .endm
+        /*
+         * The interrupt numbering scheme is defined in the
+         * interrupt controller spec.  To wit:
+         *
+         * Interrupts 0-15 are IPI
+         * 16-28 are reserved
+         * 29-31 are local.  We allow 30 to be used for the watchdog.
+         * 32-1020 are global
+         * 1021-1022 are reserved
+         * 1023 is "spurious" (no interrupt)
+         *
+         * For now, we ignore all local interrupts so only return an interrupt if it's
+         * between 30 and 1020.  The test_for_ipi routine below will pick up on IPIs.
+         *
+         * A simple read from the controller will tell us the number of the highest
+         * priority enabled interrupt.  We then just need to check whether it is in the
+         * valid range for an IRQ (30-1020 inclusive).
+         */
+        .macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
+        ldr     \irqstat, [\base, #GIC_CPU_INTACK] /* bits 12-10 = src CPU, 9-0 = int # */
+        ldr     \tmp, =1021
+        bic     \irqnr, \irqstat, #0x1c00
+        cmp     \irqnr, #29
+        cmpcc   \irqnr, \irqnr
+        cmpne   \irqnr, \tmp
+        cmpcs   \irqnr, \irqnr
+        .endm
+        /* We assume that irqstat (the raw value of the IRQ acknowledge
+         * register) is preserved from the macro above.
+         * If there is an IPI, we immediately signal end of interrupt on the
+         * controller, since this requires the original irqstat value which
+         * we won't easily be able to recreate later.
+         */
+        .macro test_for_ipi, irqnr, irqstat, base, tmp
+        bic     \irqnr, \irqstat, #0x1c00
+        cmp     \irqnr, #16
+        strcc   \irqstat, [\base, #GIC_CPU_EOI]
+        cmpcs   \irqnr, \irqnr
+        .endm
+        /* As above, this assumes that irqstat and base are preserved.. */
+        .macro test_for_ltirq, irqnr, irqstat, base, tmp
+        bic     \irqnr, \irqstat, #0x1c00
+        mov     \tmp, #0
+        cmp     \irqnr, #29
+        moveq   \tmp, #1
+        streq   \irqstat, [\base, #GIC_CPU_EOI]
+        cmp     \tmp, #0
+        .endm
diff --git a/arch/arm/mach-vexpress/include/mach/hardware.h b/arch/arm/mach-vexpress/include/mach/hardware.h
new file mode 100644
index 000000000000..40a8c178f10d
--- /dev/null
+++ b/arch/arm/mach-vexpress/include/mach/hardware.h
@@ -0,0 +1 @@
+/* empty */
diff --git a/arch/arm/mach-vexpress/include/mach/io.h b/arch/arm/mach-vexpress/include/mach/io.h
new file mode 100644
index 000000000000..748bb524ee71
--- /dev/null
+++ b/arch/arm/mach-vexpress/include/mach/io.h
@@ -0,0 +1,28 @@
+/*
+ *  arch/arm/mach-vexpress/include/mach/io.h
+ *
+ *  Copyright (C) 2003 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+#define IO_SPACE_LIMIT 0xffffffff
+#define __io(a)         __typesafe_io(a)
+#define __mem_pci(a)    (a)
+#endif
diff --git a/arch/arm/mach-vexpress/include/mach/irqs.h b/arch/arm/mach-vexpress/include/mach/irqs.h
new file mode 100644
index 000000000000..7054cbfc9de5
--- /dev/null
+++ b/arch/arm/mach-vexpress/include/mach/irqs.h
@@ -0,0 +1,4 @@
+#define IRQ_LOCALTIMER          29
+#define IRQ_LOCALWDOG           30
+#define NR_IRQS 128
diff --git a/arch/arm/mach-vexpress/include/mach/memory.h b/arch/arm/mach-vexpress/include/mach/memory.h
new file mode 100644
index 000000000000..be28232ae639
--- /dev/null
+++ b/arch/arm/mach-vexpress/include/mach/memory.h
@@ -0,0 +1,25 @@
+/*
+ *  arch/arm/mach-vexpress/include/mach/memory.h
+ *
+ *  Copyright (C) 2003 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+#define PHYS_OFFSET             UL(0x60000000)
+#endif
diff --git a/arch/arm/mach-vexpress/include/mach/motherboard.h b/arch/arm/mach-vexpress/include/mach/motherboard.h
new file mode 100644
index 000000000000..98a8ded055bf
--- /dev/null
+++ b/arch/arm/mach-vexpress/include/mach/motherboard.h
@@ -0,0 +1,121 @@
+#ifndef __MACH_MOTHERBOARD_H
+#define __MACH_MOTHERBOARD_H
+/*
+ * Physical addresses, offset from V2M_PA_CS0-3
+ */
+#define V2M_NOR0                (V2M_PA_CS0)
+#define V2M_NOR1                (V2M_PA_CS1)
+#define V2M_SRAM                (V2M_PA_CS2)
+#define V2M_VIDEO_SRAM          (V2M_PA_CS3 + 0x00000000)
+#define V2M_LAN9118             (V2M_PA_CS3 + 0x02000000)
+#define V2M_ISP1761             (V2M_PA_CS3 + 0x03000000)
+/*
+ * Physical addresses, offset from V2M_PA_CS7
+ */
+#define V2M_SYSREGS             (V2M_PA_CS7 + 0x00000000)
+#define V2M_SYSCTL              (V2M_PA_CS7 + 0x00001000)
+#define V2M_SERIAL_BUS_PCI      (V2M_PA_CS7 + 0x00002000)
+#define V2M_AACI                (V2M_PA_CS7 + 0x00004000)
+#define V2M_MMCI                (V2M_PA_CS7 + 0x00005000)
+#define V2M_KMI0                (V2M_PA_CS7 + 0x00006000)
+#define V2M_KMI1                (V2M_PA_CS7 + 0x00007000)
+#define V2M_UART0               (V2M_PA_CS7 + 0x00009000)
+#define V2M_UART1               (V2M_PA_CS7 + 0x0000a000)
+#define V2M_UART2               (V2M_PA_CS7 + 0x0000b000)
+#define V2M_UART3               (V2M_PA_CS7 + 0x0000c000)
+#define V2M_WDT                 (V2M_PA_CS7 + 0x0000f000)
+#define V2M_TIMER01             (V2M_PA_CS7 + 0x00011000)
+#define V2M_TIMER23             (V2M_PA_CS7 + 0x00012000)
+#define V2M_SERIAL_BUS_DVI      (V2M_PA_CS7 + 0x00016000)
+#define V2M_RTC                 (V2M_PA_CS7 + 0x00017000)
+#define V2M_CF                  (V2M_PA_CS7 + 0x0001a000)
+#define V2M_CLCD                (V2M_PA_CS7 + 0x0001f000)
+#define V2M_SYS_ID              (V2M_SYSREGS + 0x000)
+#define V2M_SYS_SW              (V2M_SYSREGS + 0x004)
+#define V2M_SYS_LED             (V2M_SYSREGS + 0x008)
+#define V2M_SYS_100HZ           (V2M_SYSREGS + 0x024)
+#define V2M_SYS_FLAGS           (V2M_SYSREGS + 0x030)
+#define V2M_SYS_FLAGSSET        (V2M_SYSREGS + 0x030)
+#define V2M_SYS_FLAGSCLR        (V2M_SYSREGS + 0x034)
+#define V2M_SYS_NVFLAGS         (V2M_SYSREGS + 0x038)
+#define V2M_SYS_NVFLAGSSET      (V2M_SYSREGS + 0x038)
+#define V2M_SYS_NVFLAGSCLR      (V2M_SYSREGS + 0x03c)
+#define V2M_SYS_MCI             (V2M_SYSREGS + 0x048)
+#define V2M_SYS_FLASH           (V2M_SYSREGS + 0x03c)
+#define V2M_SYS_CFGSW           (V2M_SYSREGS + 0x058)
+#define V2M_SYS_24MHZ           (V2M_SYSREGS + 0x05c)
+#define V2M_SYS_MISC            (V2M_SYSREGS + 0x060)
+#define V2M_SYS_DMA             (V2M_SYSREGS + 0x064)
+#define V2M_SYS_PROCID0         (V2M_SYSREGS + 0x084)
+#define V2M_SYS_PROCID1         (V2M_SYSREGS + 0x088)
+#define V2M_SYS_CFGDATA         (V2M_SYSREGS + 0x0a0)
+#define V2M_SYS_CFGCTRL         (V2M_SYSREGS + 0x0a4)
+#define V2M_SYS_CFGSTAT         (V2M_SYSREGS + 0x0a8)
+#define V2M_TIMER0              (V2M_TIMER01 + 0x000)
+#define V2M_TIMER1              (V2M_TIMER01 + 0x020)
+#define V2M_TIMER2              (V2M_TIMER23 + 0x000)
+#define V2M_TIMER3              (V2M_TIMER23 + 0x020)
+/*
+ * Interrupts.  Those in {} are for AMBA devices
+ */
+#define IRQ_V2M_WDT             { (32 + 0) }
+#define IRQ_V2M_TIMER0          (32 + 2)
+#define IRQ_V2M_TIMER1          (32 + 2)
+#define IRQ_V2M_TIMER2          (32 + 3)
+#define IRQ_V2M_TIMER3          (32 + 3)
+#define IRQ_V2M_RTC             { (32 + 4) }
+#define IRQ_V2M_UART0           { (32 + 5) }
+#define IRQ_V2M_UART1           { (32 + 6) }
+#define IRQ_V2M_UART2           { (32 + 7) }
+#define IRQ_V2M_UART3           { (32 + 8) }
+#define IRQ_V2M_MMCI            { (32 + 9), (32 + 10) }
+#define IRQ_V2M_AACI            { (32 + 11) }
+#define IRQ_V2M_KMI0            { (32 + 12) }
+#define IRQ_V2M_KMI1            { (32 + 13) }
+#define IRQ_V2M_CLCD            { (32 + 14) }
+#define IRQ_V2M_LAN9118         (32 + 15)
+#define IRQ_V2M_ISP1761         (32 + 16)
+#define IRQ_V2M_PCIE            (32 + 17)
+/*
+ * Configuration
+ */
+#define SYS_CFG_START           (1 << 31)
+#define SYS_CFG_WRITE           (1 << 30)
+#define SYS_CFG_OSC             (1 << 20)
+#define SYS_CFG_VOLT            (2 << 20)
+#define SYS_CFG_AMP             (3 << 20)
+#define SYS_CFG_TEMP            (4 << 20)
+#define SYS_CFG_RESET           (5 << 20)
+#define SYS_CFG_SCC             (6 << 20)
+#define SYS_CFG_MUXFPGA         (7 << 20)
+#define SYS_CFG_SHUTDOWN        (8 << 20)
+#define SYS_CFG_REBOOT          (9 << 20)
+#define SYS_CFG_DVIMODE         (11 << 20)
+#define SYS_CFG_POWER           (12 << 20)
+#define SYS_CFG_SITE_MB         (0 << 16)
+#define SYS_CFG_SITE_DB1        (1 << 16)
+#define SYS_CFG_SITE_DB2        (2 << 16)
+#define SYS_CFG_STACK(n)        ((n) << 12)
+#define SYS_CFG_ERR             (1 << 1)
+#define SYS_CFG_COMPLETE        (1 << 0)
+int v2m_cfg_write(u32 devfn, u32 data);
+int v2m_cfg_read(u32 devfn, u32 *data);
+#endif
diff --git a/arch/arm/mach-vexpress/include/mach/smp.h b/arch/arm/mach-vexpress/include/mach/smp.h
new file mode 100644
index 000000000000..72a9621ed087
--- /dev/null
+++ b/arch/arm/mach-vexpress/include/mach/smp.h
@@ -0,0 +1,21 @@
+#ifndef __MACH_SMP_H
+#define __MACH_SMP_H
+#include <asm/hardware/gic.h>
+#define hard_smp_processor_id()                         \
+        ({                                              \
+                unsigned int cpunum;                    \
+                __asm__("mrc p15, 0, %0, c0, c0, 5"     \
+                        : "=r" (cpunum));               \
+                cpunum &= 0x0F;                         \
+        })
+/*
+ * We use IRQ1 as the IPI
+ */
+static inline void smp_cross_call(const struct cpumask *mask)
+{
+        gic_raise_softirq(mask, 1);
+}
+#endif
diff --git a/arch/arm/mach-vexpress/include/mach/system.h b/arch/arm/mach-vexpress/include/mach/system.h
new file mode 100644
index 000000000000..899a4e628a4c
--- /dev/null
+++ b/arch/arm/mach-vexpress/include/mach/system.h
@@ -0,0 +1,37 @@
+/*
+ *  arch/arm/mach-vexpress/include/mach/system.h
+ *
+ *  Copyright (C) 2003 ARM Limited
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+static inline void arch_idle(void)
+{
+        /*
+         * This should do all the clock switching
+         * and wait for interrupt tricks
+         */
+        cpu_do_idle();
+}
+static inline void arch_reset(char mode, const char *cmd)
+{
+}
+#endif
diff --git a/arch/arm/mach-vexpress/include/mach/timex.h b/arch/arm/mach-vexpress/include/mach/timex.h
new file mode 100644
index 000000000000..00029bacd43c
--- /dev/null
+++ b/arch/arm/mach-vexpress/include/mach/timex.h
@@ -0,0 +1,23 @@
+/*
+ *  arch/arm/mach-vexpress/include/mach/timex.h
+ *
+ *  RealView architecture timex specifications
+ *
+ *  Copyright (C) 2003 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#define CLOCK_TICK_RATE         (50000000 / 16)
diff --git a/arch/arm/mach-vexpress/include/mach/uncompress.h b/arch/arm/mach-vexpress/include/mach/uncompress.h
new file mode 100644
index 000000000000..7972c5748d0e
--- /dev/null
+++ b/arch/arm/mach-vexpress/include/mach/uncompress.h
@@ -0,0 +1,52 @@
+/*
+ *  arch/arm/mach-vexpress/include/mach/uncompress.h
+ *
+ *  Copyright (C) 2003 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#define AMBA_UART_DR(base)      (*(volatile unsigned char *)((base) + 0x00))
+#define AMBA_UART_LCRH(base)    (*(volatile unsigned char *)((base) + 0x2c))
+#define AMBA_UART_CR(base)      (*(volatile unsigned char *)((base) + 0x30))
+#define AMBA_UART_FR(base)      (*(volatile unsigned char *)((base) + 0x18))
+#define get_uart_base() (0x10000000 + 0x00009000)
+/*
+ * This does not append a newline
+ */
+static inline void putc(int c)
+{
+        unsigned long base = get_uart_base();
+        while (AMBA_UART_FR(base) & (1 << 5))
+                barrier();
+        AMBA_UART_DR(base) = c;
+}
+static inline void flush(void)
+{
+        unsigned long base = get_uart_base();
+        while (AMBA_UART_FR(base) & (1 << 3))
+                barrier();
+}
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-vexpress/include/mach/vmalloc.h b/arch/arm/mach-vexpress/include/mach/vmalloc.h
new file mode 100644
index 000000000000..f43a36ef678b
--- /dev/null
+++ b/arch/arm/mach-vexpress/include/mach/vmalloc.h
@@ -0,0 +1,21 @@
+/*
+ *  arch/arm/mach-vexpress/include/mach/vmalloc.h
+ *
+ *  Copyright (C) 2003 ARM Limited
+ *  Copyright (C) 2000 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#define VMALLOC_END             0xf8000000UL
diff --git a/arch/arm/mach-vexpress/localtimer.c b/arch/arm/mach-vexpress/localtimer.c
new file mode 100644
index 000000000000..c0e3a59a0bfc
--- /dev/null
+++ b/arch/arm/mach-vexpress/localtimer.c
@@ -0,0 +1,26 @@
+/*
+ *  linux/arch/arm/mach-vexpress/localtimer.c
+ *
+ *  Copyright (C) 2002 ARM Ltd.
+ *  All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/init.h>
+#include <linux/smp.h>
+#include <linux/clockchips.h>
+#include <asm/smp_twd.h>
+#include <asm/localtimer.h>
+#include <mach/irqs.h>
+/*
+ * Setup the local clock events for a CPU.
+ */
+void __cpuinit local_timer_setup(struct clock_event_device *evt)
+{
+        evt->irq = IRQ_LOCALTIMER;
+        twd_timer_setup(evt);
+}
diff --git a/arch/arm/mach-vexpress/platsmp.c b/arch/arm/mach-vexpress/platsmp.c
new file mode 100644
index 000000000000..670970699ba9
--- /dev/null
+++ b/arch/arm/mach-vexpress/platsmp.c
@@ -0,0 +1,190 @@
+/*
+ *  linux/arch/arm/mach-vexpress/platsmp.c
+ *
+ *  Copyright (C) 2002 ARM Ltd.
+ *  All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/jiffies.h>
+#include <linux/smp.h>
+#include <linux/io.h>
+#include <asm/cacheflush.h>
+#include <asm/localtimer.h>
+#include <asm/smp_scu.h>
+#include <asm/unified.h>
+#include <mach/ct-ca9x4.h>
+#include <mach/motherboard.h>
+#define V2M_PA_CS7 0x10000000
+#include "core.h"
+extern void vexpress_secondary_startup(void);
+/*
+ * control for which core is the next to come out of the secondary
+ * boot "holding pen"
+ */
+volatile int __cpuinitdata pen_release = -1;
+static void __iomem *scu_base_addr(void)
+{
+        return MMIO_P2V(A9_MPCORE_SCU);
+}
+static DEFINE_SPINLOCK(boot_lock);
+void __cpuinit platform_secondary_init(unsigned int cpu)
+{
+        trace_hardirqs_off();
+        /*
+         * if any interrupts are already enabled for the primary
+         * core (e.g. timer irq), then they will not have been enabled
+         * for us: do so
+         */
+        gic_cpu_init(0, gic_cpu_base_addr);
+        /*
+         * let the primary processor know we're out of the
+         * pen, then head off into the C entry point
+         */
+        pen_release = -1;
+        smp_wmb();
+        /*
+         * Synchronise with the boot thread.
+         */
+        spin_lock(&boot_lock);
+        spin_unlock(&boot_lock);
+}
+int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
+{
+        unsigned long timeout;
+        /*
+         * Set synchronisation state between this boot processor
+         * and the secondary one
+         */
+        spin_lock(&boot_lock);
+        /*
+         * This is really belt and braces; we hold unintended secondary
+         * CPUs in the holding pen until we're ready for them.  However,
+         * since we haven't sent them a soft interrupt, they shouldn't
+         * be there.
+         */
+        pen_release = cpu;
+        __cpuc_flush_dcache_area((void *)&pen_release, sizeof(pen_release));
+        outer_clean_range(__pa(&pen_release), __pa(&pen_release + 1));
+        /*
+         * Send the secondary CPU a soft interrupt, thereby causing
+         * the boot monitor to read the system wide flags register,
+         * and branch to the address found there.
+         */
+        smp_cross_call(cpumask_of(cpu));
+        timeout = jiffies + (1 * HZ);
+        while (time_before(jiffies, timeout)) {
+                smp_rmb();
+                if (pen_release == -1)
+                        break;
+                udelay(10);
+        }
+        /*
+         * now the secondary core is starting up let it run its
+         * calibrations, then wait for it to finish
+         */
+        spin_unlock(&boot_lock);
+        return pen_release != -1 ? -ENOSYS : 0;
+}
+/*
+ * Initialise the CPU possible map early - this describes the CPUs
+ * which may be present or become present in the system.
+ */
+void __init smp_init_cpus(void)
+{
+        void __iomem *scu_base = scu_base_addr();
+        unsigned int i, ncores;
+        ncores = scu_base ? scu_get_core_count(scu_base) : 1;
+        /* sanity check */
+        if (ncores == 0) {
+                printk(KERN_ERR
+                       "vexpress: strange CM count of 0? Default to 1\n");
+                ncores = 1;
+        }
+        if (ncores > NR_CPUS) {
+                printk(KERN_WARNING
+                       "vexpress: no. of cores (%d) greater than configured "
+                       "maximum of %d - clipping\n",
+                       ncores, NR_CPUS);
+                ncores = NR_CPUS;
+        }
+        for (i = 0; i < ncores; i++)
+                set_cpu_possible(i, true);
+}
+void __init smp_prepare_cpus(unsigned int max_cpus)
+{
+        unsigned int ncores = num_possible_cpus();
+        unsigned int cpu = smp_processor_id();
+        int i;
+        smp_store_cpu_info(cpu);
+        /*
+         * are we trying to boot more cores than exist?
+         */
+        if (max_cpus > ncores)
+                max_cpus = ncores;
+        /*
+         * Initialise the present map, which describes the set of CPUs
+         * actually populated at the present time.
+         */
+        for (i = 0; i < max_cpus; i++)
+                set_cpu_present(i, true);
+        /*
+         * Initialise the SCU if there are more than one CPU and let
+         * them know where to start.
+         */
+        if (max_cpus > 1) {
+                /*
+                 * Enable the local timer or broadcast device for the
+                 * boot CPU, but only if we have more than one CPU.
+                 */
+                percpu_timer_setup();
+                scu_enable(scu_base_addr());
+                /*
+                 * Write the address of secondary startup into the
+                 * system-wide flags register. The boot monitor waits
+                 * until it receives a soft interrupt, and then the
+                 * secondary CPU branches to this address.
+                 */
+                writel(~0, MMIO_P2V(V2M_SYS_FLAGSCLR));
+                writel(BSYM(virt_to_phys(vexpress_secondary_startup)),
+                        MMIO_P2V(V2M_SYS_FLAGSSET));
+        }
+}
diff --git a/arch/arm/mach-vexpress/v2m.c b/arch/arm/mach-vexpress/v2m.c
new file mode 100644
index 000000000000..d250711b8c7a
--- /dev/null
+++ b/arch/arm/mach-vexpress/v2m.c
@@ -0,0 +1,361 @@
+/*
+ * Versatile Express V2M Motherboard Support
+ */
+#include <linux/device.h>
+#include <linux/amba/bus.h>
+#include <linux/amba/mmci.h>
+#include <linux/io.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/smsc911x.h>
+#include <linux/spinlock.h>
+#include <linux/sysdev.h>
+#include <linux/usb/isp1760.h>
+#include <asm/clkdev.h>
+#include <asm/sizes.h>
+#include <asm/mach/flash.h>
+#include <asm/mach/map.h>
+#include <asm/mach/time.h>
+#include <asm/hardware/arm_timer.h>
+#include <mach/clkdev.h>
+#include <mach/motherboard.h>
+#include <plat/timer-sp.h>
+#include "core.h"
+#define V2M_PA_CS0      0x40000000
+#define V2M_PA_CS1      0x44000000
+#define V2M_PA_CS2      0x48000000
+#define V2M_PA_CS3      0x4c000000
+#define V2M_PA_CS7      0x10000000
+static struct map_desc v2m_io_desc[] __initdata = {
+        {
+                .virtual        = __MMIO_P2V(V2M_PA_CS7),
+                .pfn            = __phys_to_pfn(V2M_PA_CS7),
+                .length         = SZ_128K,
+                .type           = MT_DEVICE,
+        },
+};
+void __init v2m_map_io(struct map_desc *tile, size_t num)
+{
+        iotable_init(v2m_io_desc, ARRAY_SIZE(v2m_io_desc));
+        iotable_init(tile, num);
+}
+static void v2m_timer_init(void)
+{
+        writel(0, MMIO_P2V(V2M_TIMER0) + TIMER_CTRL);
+        writel(0, MMIO_P2V(V2M_TIMER1) + TIMER_CTRL);
+        sp804_clocksource_init(MMIO_P2V(V2M_TIMER1));
+        sp804_clockevents_init(MMIO_P2V(V2M_TIMER0), IRQ_V2M_TIMER0);
+}
+struct sys_timer v2m_timer = {
+        .init   = v2m_timer_init,
+};
+static DEFINE_SPINLOCK(v2m_cfg_lock);
+int v2m_cfg_write(u32 devfn, u32 data)
+{
+        /* Configuration interface broken? */
+        u32 val;
+        printk("%s: writing %08x to %08x\n", __func__, data, devfn);
+        devfn |= SYS_CFG_START | SYS_CFG_WRITE;
+        spin_lock(&v2m_cfg_lock);
+        val = readl(MMIO_P2V(V2M_SYS_CFGSTAT));
+        writel(val & ~SYS_CFG_COMPLETE, MMIO_P2V(V2M_SYS_CFGSTAT));
+        writel(data, MMIO_P2V(V2M_SYS_CFGDATA));
+        writel(devfn, MMIO_P2V(V2M_SYS_CFGCTRL));
+        do {
+                val = readl(MMIO_P2V(V2M_SYS_CFGSTAT));
+        } while (val == 0);
+        spin_unlock(&v2m_cfg_lock);
+        return !!(val & SYS_CFG_ERR);
+}
+int v2m_cfg_read(u32 devfn, u32 *data)
+{
+        u32 val;
+        devfn |= SYS_CFG_START;
+        spin_lock(&v2m_cfg_lock);
+        writel(0, MMIO_P2V(V2M_SYS_CFGSTAT));
+        writel(devfn, MMIO_P2V(V2M_SYS_CFGCTRL));
+        mb();
+        do {
+                cpu_relax();
+                val = readl(MMIO_P2V(V2M_SYS_CFGSTAT));
+        } while (val == 0);
+        *data = readl(MMIO_P2V(V2M_SYS_CFGDATA));
+        spin_unlock(&v2m_cfg_lock);
+        return !!(val & SYS_CFG_ERR);
+}
+static struct resource v2m_pcie_i2c_resource = {
+        .start  = V2M_SERIAL_BUS_PCI,
+        .end    = V2M_SERIAL_BUS_PCI + SZ_4K - 1,
+        .flags  = IORESOURCE_MEM,
+};
+static struct platform_device v2m_pcie_i2c_device = {
+        .name           = "versatile-i2c",
+        .id             = 0,
+        .num_resources  = 1,
+        .resource       = &v2m_pcie_i2c_resource,
+};
+static struct resource v2m_ddc_i2c_resource = {
+        .start  = V2M_SERIAL_BUS_DVI,
+        .end    = V2M_SERIAL_BUS_DVI + SZ_4K - 1,
+        .flags  = IORESOURCE_MEM,
+};
+static struct platform_device v2m_ddc_i2c_device = {
+        .name           = "versatile-i2c",
+        .id             = 1,
+        .num_resources  = 1,
+        .resource       = &v2m_ddc_i2c_resource,
+};
+static struct resource v2m_eth_resources[] = {
+        {
+                .start  = V2M_LAN9118,
+                .end    = V2M_LAN9118 + SZ_64K - 1,
+                .flags  = IORESOURCE_MEM,
+        }, {
+                .start  = IRQ_V2M_LAN9118,
+                .end    = IRQ_V2M_LAN9118,
+                .flags  = IORESOURCE_IRQ,
+        },
+};
+static struct smsc911x_platform_config v2m_eth_config = {
+        .flags          = SMSC911X_USE_32BIT,
+        .irq_polarity   = SMSC911X_IRQ_POLARITY_ACTIVE_HIGH,
+        .irq_type       = SMSC911X_IRQ_TYPE_PUSH_PULL,
+        .phy_interface  = PHY_INTERFACE_MODE_MII,
+};
+static struct platform_device v2m_eth_device = {
+        .name           = "smsc911x",
+        .id             = -1,
+        .resource       = v2m_eth_resources,
+        .num_resources  = ARRAY_SIZE(v2m_eth_resources),
+        .dev.platform_data = &v2m_eth_config,
+};
+static struct resource v2m_usb_resources[] = {
+        {
+                .start  = V2M_ISP1761,
+                .end    = V2M_ISP1761 + SZ_128K - 1,
+                .flags  = IORESOURCE_MEM,
+        }, {
+                .start  = IRQ_V2M_ISP1761,
+                .end    = IRQ_V2M_ISP1761,
+                .flags  = IORESOURCE_IRQ,
+        },
+};
+static struct isp1760_platform_data v2m_usb_config = {
+        .is_isp1761             = true,
+        .bus_width_16           = false,
+        .port1_otg              = true,
+        .analog_oc              = false,
+        .dack_polarity_high     = false,
+        .dreq_polarity_high     = false,
+};
+static struct platform_device v2m_usb_device = {
+        .name           = "isp1760",
+        .id             = -1,
+        .resource       = v2m_usb_resources,
+        .num_resources  = ARRAY_SIZE(v2m_usb_resources),
+        .dev.platform_data = &v2m_usb_config,
+};
+static int v2m_flash_init(void)
+{
+        writel(0, MMIO_P2V(V2M_SYS_FLASH));
+        return 0;
+}
+static void v2m_flash_exit(void)
+{
+        writel(0, MMIO_P2V(V2M_SYS_FLASH));
+}
+static void v2m_flash_set_vpp(int on)
+{
+        writel(on != 0, MMIO_P2V(V2M_SYS_FLASH));
+}
+static struct flash_platform_data v2m_flash_data = {
+        .map_name       = "cfi_probe",
+        .width          = 4,
+        .init           = v2m_flash_init,
+        .exit           = v2m_flash_exit,
+        .set_vpp        = v2m_flash_set_vpp,
+};
+static struct resource v2m_flash_resources[] = {
+        {
+                .start  = V2M_NOR0,
+                .end    = V2M_NOR0 + SZ_64M - 1,
+                .flags  = IORESOURCE_MEM,
+        }, {
+                .start  = V2M_NOR1,
+                .end    = V2M_NOR1 + SZ_64M - 1,
+                .flags  = IORESOURCE_MEM,
+        },
+};
+static struct platform_device v2m_flash_device = {
+        .name           = "armflash",
+        .id             = -1,
+        .resource       = v2m_flash_resources,
+        .num_resources  = ARRAY_SIZE(v2m_flash_resources),
+        .dev.platform_data = &v2m_flash_data,
+};
+static unsigned int v2m_mmci_status(struct device *dev)
+{
+        return !(readl(MMIO_P2V(V2M_SYS_MCI)) & (1 << 0));
+}
+static struct mmci_platform_data v2m_mmci_data = {
+        .ocr_mask       = MMC_VDD_32_33|MMC_VDD_33_34,
+        .status         = v2m_mmci_status,
+};
+static AMBA_DEVICE(aaci,  "mb:aaci",  V2M_AACI, NULL);
+static AMBA_DEVICE(mmci,  "mb:mmci",  V2M_MMCI, &v2m_mmci_data);
+static AMBA_DEVICE(kmi0,  "mb:kmi0",  V2M_KMI0, NULL);
+static AMBA_DEVICE(kmi1,  "mb:kmi1",  V2M_KMI1, NULL);
+static AMBA_DEVICE(uart0, "mb:uart0", V2M_UART0, NULL);
+static AMBA_DEVICE(uart1, "mb:uart1", V2M_UART1, NULL);
+static AMBA_DEVICE(uart2, "mb:uart2", V2M_UART2, NULL);
+static AMBA_DEVICE(uart3, "mb:uart3", V2M_UART3, NULL);
+static AMBA_DEVICE(wdt,   "mb:wdt",   V2M_WDT, NULL);
+static AMBA_DEVICE(rtc,   "mb:rtc",   V2M_RTC, NULL);
+static struct amba_device *v2m_amba_devs[] __initdata = {
+        &aaci_device,
+        &mmci_device,
+        &kmi0_device,
+        &kmi1_device,
+        &uart0_device,
+        &uart1_device,
+        &uart2_device,
+        &uart3_device,
+        &wdt_device,
+        &rtc_device,
+};
+static long v2m_osc_round(struct clk *clk, unsigned long rate)
+{
+        return rate;
+}
+static int v2m_osc1_set(struct clk *clk, unsigned long rate)
+{
+        return v2m_cfg_write(SYS_CFG_OSC | SYS_CFG_SITE_MB | 1, rate);
+}
+static const struct clk_ops osc1_clk_ops = {
+        .round  = v2m_osc_round,
+        .set    = v2m_osc1_set,
+};
+static struct clk osc1_clk = {
+        .ops    = &osc1_clk_ops,
+        .rate   = 24000000,
+};
+static struct clk osc2_clk = {
+        .rate   = 24000000,
+};
+static struct clk_lookup v2m_lookups[] = {
+        {       /* UART0 */
+                .dev_id         = "mb:uart0",
+                .clk            = &osc2_clk,
+        }, {    /* UART1 */
+                .dev_id         = "mb:uart1",
+                .clk            = &osc2_clk,
+        }, {    /* UART2 */
+                .dev_id         = "mb:uart2",
+                .clk            = &osc2_clk,
+        }, {    /* UART3 */
+                .dev_id         = "mb:uart3",
+                .clk            = &osc2_clk,
+        }, {    /* KMI0 */
+                .dev_id         = "mb:kmi0",
+                .clk            = &osc2_clk,
+        }, {    /* KMI1 */
+                .dev_id         = "mb:kmi1",
+                .clk            = &osc2_clk,
+        }, {    /* MMC0 */
+                .dev_id         = "mb:mmci",
+                .clk            = &osc2_clk,
+        }, {    /* CLCD */
+                .dev_id         = "mb:clcd",
+                .clk            = &osc1_clk,
+        },
+};
+static void v2m_power_off(void)
+{
+        if (v2m_cfg_write(SYS_CFG_SHUTDOWN | SYS_CFG_SITE_MB, 0))
+                printk(KERN_EMERG "Unable to shutdown\n");
+}
+static void v2m_restart(char str, const char *cmd)
+{
+        if (v2m_cfg_write(SYS_CFG_REBOOT | SYS_CFG_SITE_MB, 0))
+                printk(KERN_EMERG "Unable to reboot\n");
+}
+static int __init v2m_init(void)
+{
+        int i;
+        clkdev_add_table(v2m_lookups, ARRAY_SIZE(v2m_lookups));
+        platform_device_register(&v2m_pcie_i2c_device);
+        platform_device_register(&v2m_ddc_i2c_device);
+        platform_device_register(&v2m_flash_device);
+        platform_device_register(&v2m_eth_device);
+        platform_device_register(&v2m_usb_device);
+        for (i = 0; i < ARRAY_SIZE(v2m_amba_devs); i++)
+                amba_device_register(v2m_amba_devs[i], &iomem_resource);
+        pm_power_off = v2m_power_off;
+        arm_pm_restart = v2m_restart;
+        return 0;
+}
+arch_initcall(v2m_init);
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index 573528d9c6d8..33027301639e 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -754,7 +754,8 @@ config CACHE_FEROCEON_L2_WRITETHROUGH
 config CACHE_L2X0
        bool "Enable the L2x0 outer cache controller"
        depends on REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || MACH_REALVIEW_PB1176 || \
-                   REALVIEW_EB_A9MP || ARCH_MX35 || ARCH_MX31 || MACH_REALVIEW_PBX || ARCH_NOMADIK || ARCH_OMAP4
+                   REALVIEW_EB_A9MP || ARCH_MX35 || ARCH_MX31 || MACH_REALVIEW_PBX || \
+                   ARCH_NOMADIK || ARCH_OMAP4 || ARCH_U8500 || ARCH_VEXPRESS_CA9X4
        default y
        select OUTER_CACHE
        help
diff --git a/arch/arm/plat-iop/Makefile b/arch/arm/plat-iop/Makefile
index 36bff0325959..69b09c1cec8b 100644
--- a/arch/arm/plat-iop/Makefile
+++ b/arch/arm/plat-iop/Makefile
@@ -13,6 +13,7 @@ obj-$(CONFIG_ARCH_IOP32X) += time.o
 obj-$(CONFIG_ARCH_IOP32X) += io.o
 obj-$(CONFIG_ARCH_IOP32X) += cp6.o
 obj-$(CONFIG_ARCH_IOP32X) += adma.o
+obj-$(CONFIG_ARCH_IOP32X) += pmu.o
 # IOP33X
 obj-$(CONFIG_ARCH_IOP33X) += gpio.o
@@ -23,6 +24,7 @@ obj-$(CONFIG_ARCH_IOP33X) += time.o
 obj-$(CONFIG_ARCH_IOP33X) += io.o
 obj-$(CONFIG_ARCH_IOP33X) += cp6.o
 obj-$(CONFIG_ARCH_IOP33X) += adma.o
+obj-$(CONFIG_ARCH_IOP33X) += pmu.o
 # IOP13XX
 obj-$(CONFIG_ARCH_IOP13XX) += cp6.o
diff --git a/arch/arm/plat-iop/pmu.c b/arch/arm/plat-iop/pmu.c
new file mode 100644
index 000000000000..a2024b8685a1
--- /dev/null
+++ b/arch/arm/plat-iop/pmu.c
@@ -0,0 +1,40 @@
+/*
+ * PMU IRQ registration for the iop3xx xscale PMU families.
+ * Copyright (C) 2010 Will Deacon, ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#include <linux/platform_device.h>
+#include <asm/pmu.h>
+#include <mach/irqs.h>
+static struct resource pmu_resource = {
+#ifdef CONFIG_ARCH_IOP32X
+        .start  = IRQ_IOP32X_CORE_PMU,
+        .end    = IRQ_IOP32X_CORE_PMU,
+#endif
+#ifdef CONFIG_ARCH_IOP33X
+        .start  = IRQ_IOP33X_CORE_PMU,
+        .end    = IRQ_IOP33X_CORE_PMU,
+#endif
+        .flags  = IORESOURCE_IRQ,
+};
+static struct platform_device pmu_device = {
+        .name           = "arm-pmu",
+        .id             = ARM_PMU_DEVICE_CPU,
+        .resource       = &pmu_resource,
+        .num_resources  = 1,
+};
+static int __init iop3xx_pmu_init(void)
+{
+        platform_device_register(&pmu_device);
+        return 0;
+}
+arch_initcall(iop3xx_pmu_init);
diff --git a/arch/arm/plat-nomadik/Kconfig b/arch/arm/plat-nomadik/Kconfig
index 159daf583f85..5da3f97c537b 100644
--- a/arch/arm/plat-nomadik/Kconfig
+++ b/arch/arm/plat-nomadik/Kconfig
@@ -19,4 +19,9 @@ config HAS_MTU
          to multiple interrupt generating programmable
          32-bit free running decrementing counters.
+config NOMADIK_GPIO
+        bool
+        help
+          Support for the Nomadik GPIO controller.
 endif
diff --git a/arch/arm/plat-nomadik/Makefile b/arch/arm/plat-nomadik/Makefile
index 37c7cdd0f8f0..c33547361bd7 100644
--- a/arch/arm/plat-nomadik/Makefile
+++ b/arch/arm/plat-nomadik/Makefile
@@ -3,3 +3,4 @@
 # Licensed under GPLv2
 obj-$(CONFIG_HAS_MTU)   += timer.o
+obj-$(CONFIG_NOMADIK_GPIO)      += gpio.o
diff --git a/arch/arm/mach-nomadik/gpio.c b/arch/arm/plat-nomadik/gpio.c
index 9a09b2791e03..d28900cfa541 100644
--- a/arch/arm/mach-nomadik/gpio.c
+++ b/arch/arm/plat-nomadik/gpio.c
@@ -13,8 +13,10 @@
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/device.h>
-#include <linux/amba/bus.h>
+#include <linux/platform_device.h>
 #include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/err.h>
 #include <linux/gpio.h>
 #include <linux/spinlock.h>
 #include <linux/interrupt.h>
@@ -35,8 +37,9 @@
 struct nmk_gpio_chip {
        struct gpio_chip chip;
        void __iomem *addr;
+        struct clk *clk;
        unsigned int parent_irq;
-        spinlock_t *lock;
+        spinlock_t lock;
        /* Keep track of configured edges */
        u32 edge_rising;
        u32 edge_falling;
@@ -107,40 +110,37 @@ static void nmk_gpio_irq_ack(unsigned int irq)
        writel(nmk_gpio_get_bitmask(gpio), nmk_chip->addr + NMK_GPIO_IC);
 }
-static void nmk_gpio_irq_mask(unsigned int irq)
+static void __nmk_gpio_irq_modify(struct nmk_gpio_chip *nmk_chip,
+                                  int gpio, bool enable)
 {
-        int gpio;
+        u32 bitmask = nmk_gpio_get_bitmask(gpio);
-        struct nmk_gpio_chip *nmk_chip;
+        u32 reg;
-        unsigned long flags;
-        u32 bitmask, reg;
-        gpio = NOMADIK_IRQ_TO_GPIO(irq);
-        nmk_chip = get_irq_chip_data(irq);
-        bitmask = nmk_gpio_get_bitmask(gpio);
-        if (!nmk_chip)
-                return;
-        /* we must individually clear the two edges */
+        /* we must individually set/clear the two edges */
-        spin_lock_irqsave(&nmk_chip->lock, flags);
        if (nmk_chip->edge_rising & bitmask) {
-                reg = readl(nmk_chip->addr + NMK_GPIO_RWIMSC);
+                reg = readl(nmk_chip->addr + NMK_GPIO_RIMSC);
-                reg &= ~bitmask;
+                if (enable)
-                writel(reg, nmk_chip->addr + NMK_GPIO_RWIMSC);
+                        reg |= bitmask;
+                else
+                        reg &= ~bitmask;
+                writel(reg, nmk_chip->addr + NMK_GPIO_RIMSC);
        }
        if (nmk_chip->edge_falling & bitmask) {
-                reg = readl(nmk_chip->addr + NMK_GPIO_FWIMSC);
+                reg = readl(nmk_chip->addr + NMK_GPIO_FIMSC);
-                reg &= ~bitmask;
+                if (enable)
-                writel(reg, nmk_chip->addr + NMK_GPIO_FWIMSC);
+                        reg |= bitmask;
+                else
+                        reg &= ~bitmask;
+                writel(reg, nmk_chip->addr + NMK_GPIO_FIMSC);
        }
-        spin_unlock_irqrestore(&nmk_chip->lock, flags);
+}
-};
-static void nmk_gpio_irq_unmask(unsigned int irq)
+static void nmk_gpio_irq_modify(unsigned int irq, bool enable)
 {
        int gpio;
        struct nmk_gpio_chip *nmk_chip;
        unsigned long flags;
-        u32 bitmask, reg;
+        u32 bitmask;
        gpio = NOMADIK_IRQ_TO_GPIO(irq);
        nmk_chip = get_irq_chip_data(irq);
@@ -148,23 +148,24 @@ static void nmk_gpio_irq_unmask(unsigned int irq)
        if (!nmk_chip)
                return;
-        /* we must individually set the two edges */
        spin_lock_irqsave(&nmk_chip->lock, flags);
-        if (nmk_chip->edge_rising & bitmask) {
+        __nmk_gpio_irq_modify(nmk_chip, gpio, enable);
-                reg = readl(nmk_chip->addr + NMK_GPIO_RWIMSC);
-                reg |= bitmask;
-                writel(reg, nmk_chip->addr + NMK_GPIO_RWIMSC);
-        }
-        if (nmk_chip->edge_falling & bitmask) {
-                reg = readl(nmk_chip->addr + NMK_GPIO_FWIMSC);
-                reg |= bitmask;
-                writel(reg, nmk_chip->addr + NMK_GPIO_FWIMSC);
-        }
        spin_unlock_irqrestore(&nmk_chip->lock, flags);
 }
+static void nmk_gpio_irq_mask(unsigned int irq)
+{
+        nmk_gpio_irq_modify(irq, false);
+};
+static void nmk_gpio_irq_unmask(unsigned int irq)
+{
+        nmk_gpio_irq_modify(irq, true);
+}
 static int nmk_gpio_irq_set_type(unsigned int irq, unsigned int type)
 {
+        bool enabled = !(irq_to_desc(irq)->status & IRQ_DISABLED);
        int gpio;
        struct nmk_gpio_chip *nmk_chip;
        unsigned long flags;
@@ -183,19 +184,21 @@ static int nmk_gpio_irq_set_type(unsigned int irq, unsigned int type)
        spin_lock_irqsave(&nmk_chip->lock, flags);
+        if (enabled)
+                __nmk_gpio_irq_modify(nmk_chip, gpio, false);
        nmk_chip->edge_rising &= ~bitmask;
        if (type & IRQ_TYPE_EDGE_RISING)
                nmk_chip->edge_rising |= bitmask;
-        writel(nmk_chip->edge_rising, nmk_chip->addr + NMK_GPIO_RIMSC);
        nmk_chip->edge_falling &= ~bitmask;
        if (type & IRQ_TYPE_EDGE_FALLING)
                nmk_chip->edge_falling |= bitmask;
-        writel(nmk_chip->edge_falling, nmk_chip->addr + NMK_GPIO_FIMSC);
-        spin_unlock_irqrestore(&nmk_chip->lock, flags);
+        if (enabled)
+                __nmk_gpio_irq_modify(nmk_chip, gpio, true);
-        nmk_gpio_irq_unmask(irq);
+        spin_unlock_irqrestore(&nmk_chip->lock, flags);
        return 0;
 }
@@ -211,21 +214,27 @@ static struct irq_chip nmk_gpio_irq_chip = {
 static void nmk_gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
 {
        struct nmk_gpio_chip *nmk_chip;
-        struct irq_chip *host_chip;
+        struct irq_chip *host_chip = get_irq_chip(irq);
        unsigned int gpio_irq;
        u32 pending;
        unsigned int first_irq;
+        if (host_chip->mask_ack)
+                host_chip->mask_ack(irq);
+        else {
+                host_chip->mask(irq);
+                if (host_chip->ack)
+                        host_chip->ack(irq);
+        }
        nmk_chip = get_irq_data(irq);
        first_irq = NOMADIK_GPIO_TO_IRQ(nmk_chip->chip.base);
        while ( (pending = readl(nmk_chip->addr + NMK_GPIO_IS)) ) {
                gpio_irq = first_irq + __ffs(pending);
                generic_handle_irq(gpio_irq);
        }
-        if (0) {/* don't ack parent irq, as ack == disable */
-                host_chip = get_irq_chip(irq);
+        host_chip->unmask(irq);
-                host_chip->ack(irq);
-        }
 }
 static int nmk_gpio_init_irq(struct nmk_gpio_chip *nmk_chip)
@@ -239,6 +248,7 @@ static int nmk_gpio_init_irq(struct nmk_gpio_chip *nmk_chip)
                set_irq_handler(i, handle_edge_irq);
                set_irq_flags(i, IRQF_VALID);
                set_irq_chip_data(i, nmk_chip);
+                set_irq_type(i, IRQ_TYPE_EDGE_FALLING);
        }
        set_irq_chained_handler(nmk_chip->parent_irq, nmk_gpio_irq_handler);
        set_irq_data(nmk_chip->parent_irq, nmk_chip);
@@ -297,30 +307,59 @@ static struct gpio_chip nmk_gpio_template = {
        .can_sleep              = 0,
 };
-static int __init nmk_gpio_probe(struct amba_device *dev, struct amba_id *id)
+static int __init nmk_gpio_probe(struct platform_device *dev)
 {
-        struct nmk_gpio_platform_data *pdata;
+        struct nmk_gpio_platform_data *pdata = dev->dev.platform_data;
        struct nmk_gpio_chip *nmk_chip;
        struct gpio_chip *chip;
+        struct resource *res;
+        struct clk *clk;
+        int irq;
        int ret;
-        pdata = dev->dev.platform_data;
+        if (!pdata)
-        ret = amba_request_regions(dev, pdata->name);
+                return -ENODEV;
-        if (ret)
-                return ret;
+        res = platform_get_resource(dev, IORESOURCE_MEM, 0);
+        if (!res) {
+                ret = -ENOENT;
+                goto out;
+        }
+        irq = platform_get_irq(dev, 0);
+        if (irq < 0) {
+                ret = irq;
+                goto out;
+        }
+        if (request_mem_region(res->start, resource_size(res),
+                               dev_name(&dev->dev)) == NULL) {
+                ret = -EBUSY;
+                goto out;
+        }
+        clk = clk_get(&dev->dev, NULL);
+        if (IS_ERR(clk)) {
+                ret = PTR_ERR(clk);
+                goto out_release;
+        }
+        clk_enable(clk);
        nmk_chip = kzalloc(sizeof(*nmk_chip), GFP_KERNEL);
        if (!nmk_chip) {
                ret = -ENOMEM;
-                goto out_amba;
+                goto out_clk;
        }
        /*
         * The virt address in nmk_chip->addr is in the nomadik register space,
         * so we can simply convert the resource address, without remapping
         */
-        nmk_chip->addr = io_p2v(dev->res.start);
+        nmk_chip->clk = clk;
+        nmk_chip->addr = io_p2v(res->start);
        nmk_chip->chip = nmk_gpio_template;
-        nmk_chip->parent_irq = pdata->parent_irq;
+        nmk_chip->parent_irq = irq;
+        spin_lock_init(&nmk_chip->lock);
        chip = &nmk_chip->chip;
        chip->base = pdata->first_gpio;
@@ -332,7 +371,7 @@ static int __init nmk_gpio_probe(struct amba_device *dev, struct amba_id *id)
        if (ret)
                goto out_free;
-        amba_set_drvdata(dev, nmk_chip);
+        platform_set_drvdata(dev, nmk_chip);
        nmk_gpio_init_irq(nmk_chip);
@@ -340,51 +379,50 @@ static int __init nmk_gpio_probe(struct amba_device *dev, struct amba_id *id)
                 nmk_chip->chip.base, nmk_chip->chip.base+31, nmk_chip->addr);
        return 0;
- out_free:
+out_free:
        kfree(nmk_chip);
- out_amba:
+out_clk:
-        amba_release_regions(dev);
+        clk_disable(clk);
+        clk_put(clk);
+out_release:
+        release_mem_region(res->start, resource_size(res));
+out:
        dev_err(&dev->dev, "Failure %i for GPIO %i-%i\n", ret,
                  pdata->first_gpio, pdata->first_gpio+31);
        return ret;
 }
-static int nmk_gpio_remove(struct amba_device *dev)
+static int __exit nmk_gpio_remove(struct platform_device *dev)
 {
        struct nmk_gpio_chip *nmk_chip;
+        struct resource *res;
-        nmk_chip = amba_get_drvdata(dev);
+        res = platform_get_resource(dev, IORESOURCE_MEM, 0);
+        nmk_chip = platform_get_drvdata(dev);
        gpiochip_remove(&nmk_chip->chip);
+        clk_disable(nmk_chip->clk);
+        clk_put(nmk_chip->clk);
        kfree(nmk_chip);
-        amba_release_regions(dev);
+        release_mem_region(res->start, resource_size(res));
        return 0;
 }
-/* We have 0x1f080060 and 0x1f180060, accept both using the mask */
+static struct platform_driver nmk_gpio_driver = {
-static struct amba_id nmk_gpio_ids[] = {
+        .driver = {
-        {
-                .id     = 0x1f080060,
-                .mask   = 0xffefffff,
-        },
-        {0, 0},
-};
-static struct amba_driver nmk_gpio_driver = {
-        .drv = {
                .owner = THIS_MODULE,
                .name = "gpio",
                },
        .probe = nmk_gpio_probe,
-        .remove = nmk_gpio_remove,
+        .remove = __exit_p(nmk_gpio_remove),
        .suspend = NULL, /* to be done */
        .resume = NULL,
-        .id_table = nmk_gpio_ids,
 };
 static int __init nmk_gpio_init(void)
 {
-        return amba_driver_register(&nmk_gpio_driver);
+        return platform_driver_register(&nmk_gpio_driver);
 }
 arch_initcall(nmk_gpio_init);
diff --git a/arch/arm/plat-nomadik/include/plat/gpio.h b/arch/arm/plat-nomadik/include/plat/gpio.h
new file mode 100644
index 000000000000..4200811249ca
--- /dev/null
+++ b/arch/arm/plat-nomadik/include/plat/gpio.h
@@ -0,0 +1,70 @@
+/*
+ * Structures and registers for GPIO access in the Nomadik SoC
+ *
+ * Copyright (C) 2008 STMicroelectronics
+ *     Author: Prafulla WADASKAR <prafulla.wadaskar@st.com>
+ * Copyright (C) 2009 Alessandro Rubini <rubini@unipv.it>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_PLAT_GPIO_H
+#define __ASM_PLAT_GPIO_H
+#include <asm-generic/gpio.h>
+/*
+ * These currently cause a function call to happen, they may be optimized
+ * if needed by adding cpu-specific defines to identify blocks
+ * (see mach-pxa/include/mach/gpio.h as an example using GPLR etc)
+ */
+#define gpio_get_value  __gpio_get_value
+#define gpio_set_value  __gpio_set_value
+#define gpio_cansleep   __gpio_cansleep
+#define gpio_to_irq     __gpio_to_irq
+/*
+ * "nmk_gpio" and "NMK_GPIO" stand for "Nomadik GPIO", leaving
+ * the "gpio" namespace for generic and cross-machine functions
+ */
+/* Register in the logic block */
+#define NMK_GPIO_DAT    0x00
+#define NMK_GPIO_DATS   0x04
+#define NMK_GPIO_DATC   0x08
+#define NMK_GPIO_PDIS   0x0c
+#define NMK_GPIO_DIR    0x10
+#define NMK_GPIO_DIRS   0x14
+#define NMK_GPIO_DIRC   0x18
+#define NMK_GPIO_SLPC   0x1c
+#define NMK_GPIO_AFSLA  0x20
+#define NMK_GPIO_AFSLB  0x24
+#define NMK_GPIO_RIMSC  0x40
+#define NMK_GPIO_FIMSC  0x44
+#define NMK_GPIO_IS     0x48
+#define NMK_GPIO_IC     0x4c
+#define NMK_GPIO_RWIMSC 0x50
+#define NMK_GPIO_FWIMSC 0x54
+#define NMK_GPIO_WKS    0x58
+/* Alternate functions: function C is set in hw by setting both A and B */
+#define NMK_GPIO_ALT_GPIO       0
+#define NMK_GPIO_ALT_A  1
+#define NMK_GPIO_ALT_B  2
+#define NMK_GPIO_ALT_C  (NMK_GPIO_ALT_A | NMK_GPIO_ALT_B)
+extern int nmk_gpio_set_mode(int gpio, int gpio_mode);
+extern int nmk_gpio_get_mode(int gpio);
+/*
+ * Platform data to register a block: only the initial gpio/irq number.
+ */
+struct nmk_gpio_platform_data {
+        char *name;
+        int first_gpio;
+        int first_irq;
+};
+#endif /* __ASM_PLAT_GPIO_H */
diff --git a/arch/arm/plat-nomadik/timer.c b/arch/arm/plat-nomadik/timer.c
index fa7cb3a57cbf..0ff3798769ab 100644
--- a/arch/arm/plat-nomadik/timer.c
+++ b/arch/arm/plat-nomadik/timer.c
@@ -2,7 +2,7 @@
 *  linux/arch/arm/mach-nomadik/timer.c
 *
 * Copyright (C) 2008 STMicroelectronics
- * Copyright (C) 2009 Alessandro Rubini, somewhat based on at91sam926x
+ * Copyright (C) 2010 Alessandro Rubini
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2, as
@@ -18,123 +18,150 @@
 #include <plat/mtu.h>
-static u32      nmdk_count;             /* accumulated count */
+void __iomem *mtu_base; /* ssigned by machine code */
-static u32      nmdk_cycle;             /* write-once */
-/* setup by the platform code */
-void __iomem *mtu_base;
 /*
- * clocksource: the MTU device is a decrementing counters, so we negate
+ * Kernel assumes that sched_clock can be called early
- * the value being read.
+ * but the MTU may not yet be initialized.
 */
-static cycle_t nmdk_read_timer(struct clocksource *cs)
+static cycle_t nmdk_read_timer_dummy(struct clocksource *cs)
 {
-        u32 count = readl(mtu_base + MTU_VAL(0));
+        return 0;
-        return nmdk_count + nmdk_cycle - count;
+}
+/* clocksource: MTU decrements, so we negate the value being read. */
+static cycle_t nmdk_read_timer(struct clocksource *cs)
+{
+        return -readl(mtu_base + MTU_VAL(0));
 }
 static struct clocksource nmdk_clksrc = {
        .name           = "mtu_0",
-        .rating         = 120,
+        .rating         = 200,
-        .read           = nmdk_read_timer,
+        .read           = nmdk_read_timer_dummy,
+        .mask           = CLOCKSOURCE_MASK(32),
        .shift          = 20,
        .flags          = CLOCK_SOURCE_IS_CONTINUOUS,
 };
 /*
- * Clockevent device: currently only periodic mode is supported
+ * Override the global weak sched_clock symbol with this
+ * local implementation which uses the clocksource to get some
+ * better resolution when scheduling the kernel. We accept that
+ * this wraps around for now, since it is just a relative time
+ * stamp. (Inspired by OMAP implementation.)
 */
+unsigned long long notrace sched_clock(void)
+{
+        return clocksource_cyc2ns(nmdk_clksrc.read(
+                                  &nmdk_clksrc),
+                                  nmdk_clksrc.mult,
+                                  nmdk_clksrc.shift);
+}
+/* Clockevent device: use one-shot mode */
 static void nmdk_clkevt_mode(enum clock_event_mode mode,
                             struct clock_event_device *dev)
 {
+        u32 cr;
        switch (mode) {
        case CLOCK_EVT_MODE_PERIODIC:
-                /* count current value? */
+                pr_err("%s: periodic mode not supported\n", __func__);
-                writel(readl(mtu_base + MTU_IMSC) | 1, mtu_base + MTU_IMSC);
                break;
        case CLOCK_EVT_MODE_ONESHOT:
-                BUG(); /* Not supported, yet */
+                /* Load highest value, enable device, enable interrupts */
-                /* FALLTHROUGH */
+                cr = readl(mtu_base + MTU_CR(1));
+                writel(0, mtu_base + MTU_LR(1));
+                writel(cr | MTU_CRn_ENA, mtu_base + MTU_CR(1));
+                writel(0x2, mtu_base + MTU_IMSC);
+                break;
        case CLOCK_EVT_MODE_SHUTDOWN:
        case CLOCK_EVT_MODE_UNUSED:
-                writel(readl(mtu_base + MTU_IMSC) & ~1, mtu_base + MTU_IMSC);
+                /* disable irq */
+                writel(0, mtu_base + MTU_IMSC);
                break;
        case CLOCK_EVT_MODE_RESUME:
                break;
        }
 }
+static int nmdk_clkevt_next(unsigned long evt, struct clock_event_device *ev)
+{
+        /* writing the value has immediate effect */
+        writel(evt, mtu_base + MTU_LR(1));
+        return 0;
+}
 static struct clock_event_device nmdk_clkevt = {
-        .name           = "mtu_0",
+        .name           = "mtu_1",
-        .features       = CLOCK_EVT_FEAT_PERIODIC,
+        .features       = CLOCK_EVT_FEAT_ONESHOT,
        .shift          = 32,
-        .rating         = 100,
+        .rating         = 200,
        .set_mode       = nmdk_clkevt_mode,
+        .set_next_event = nmdk_clkevt_next,
 };
 /*
- * IRQ Handler for the timer 0 of the MTU block. The irq is not shared
+ * IRQ Handler for timer 1 of the MTU block.
- * as we are the only users of mtu0 by now.
 */
 static irqreturn_t nmdk_timer_interrupt(int irq, void *dev_id)
 {
-        /* ack: "interrupt clear register" */
+        struct clock_event_device *evdev = dev_id;
-        writel(1 << 0, mtu_base + MTU_ICR);
-        /* we can't count lost ticks, unfortunately */
-        nmdk_count += nmdk_cycle;
-        nmdk_clkevt.event_handler(&nmdk_clkevt);
+        writel(1 << 1, mtu_base + MTU_ICR); /* Interrupt clear reg */
+        evdev->event_handler(evdev);
        return IRQ_HANDLED;
 }
-/*
- * Set up timer interrupt, and return the current time in seconds.
- */
 static struct irqaction nmdk_timer_irq = {
        .name           = "Nomadik Timer Tick",
        .flags          = IRQF_DISABLED | IRQF_TIMER,
        .handler        = nmdk_timer_interrupt,
+        .dev_id         = &nmdk_clkevt,
 };
-static void nmdk_timer_reset(void)
-{
-        u32 cr;
-        writel(0, mtu_base + MTU_CR(0)); /* off */
-        /* configure load and background-load, and fire it up */
-        writel(nmdk_cycle, mtu_base + MTU_LR(0));
-        writel(nmdk_cycle, mtu_base + MTU_BGLR(0));
-        cr = MTU_CRn_PERIODIC | MTU_CRn_PRESCALE_1 | MTU_CRn_32BITS;
-        writel(cr, mtu_base + MTU_CR(0));
-        writel(cr | MTU_CRn_ENA, mtu_base + MTU_CR(0));
-}
 void __init nmdk_timer_init(void)
 {
        unsigned long rate;
-        int bits;
+        u32 cr = MTU_CRn_32BITS;;
-        rate = CLOCK_TICK_RATE; /* 2.4MHz */
+        /*
-        nmdk_cycle = (rate + HZ/2) / HZ;
+         * Tick rate is 2.4MHz for Nomadik and 110MHz for ux500:
+         * use a divide-by-16 counter if it's more than 16MHz
+         */
+        rate = CLOCK_TICK_RATE;
+        if (rate > 16 << 20) {
+                rate /= 16;
+                cr |= MTU_CRn_PRESCALE_16;
+        } else {
+                cr |= MTU_CRn_PRESCALE_1;
+        }
-        /* Init the timer and register clocksource */
+        /* Timer 0 is the free running clocksource */
-        nmdk_timer_reset();
+        writel(cr, mtu_base + MTU_CR(0));
+        writel(0, mtu_base + MTU_LR(0));
+        writel(0, mtu_base + MTU_BGLR(0));
+        writel(cr | MTU_CRn_ENA, mtu_base + MTU_CR(0));
        nmdk_clksrc.mult = clocksource_hz2mult(rate, nmdk_clksrc.shift);
-        bits =  8*sizeof(nmdk_count);
+        /* Now the scheduling clock is ready */
-        nmdk_clksrc.mask = CLOCKSOURCE_MASK(bits);
+        nmdk_clksrc.read = nmdk_read_timer;
        if (clocksource_register(&nmdk_clksrc))
-                printk(KERN_ERR "timer: failed to initialize clock "
+                pr_err("timer: failed to initialize clock source %s\n",
-                        "source %s\n", nmdk_clksrc.name);
+                       nmdk_clksrc.name);
+        /* Timer 1 is used for events, fix according to rate */
+        writel(cr | MTU_CRn_ONESHOT, mtu_base + MTU_CR(1)); /* off, currently */
+        nmdk_clkevt.mult = div_sc(rate, NSEC_PER_SEC, nmdk_clkevt.shift);
+        nmdk_clkevt.max_delta_ns =
+                clockevent_delta2ns(0xffffffff, &nmdk_clkevt);
+        nmdk_clkevt.min_delta_ns =
+                clockevent_delta2ns(0x00000002, &nmdk_clkevt);
+        nmdk_clkevt.cpumask     = cpumask_of(0);
        /* Register irq and clockevents */
        setup_irq(IRQ_MTU0, &nmdk_timer_irq);
-        nmdk_clkevt.mult = div_sc(rate, NSEC_PER_SEC, nmdk_clkevt.shift);
-        nmdk_clkevt.cpumask = cpumask_of(0);
        clockevents_register_device(&nmdk_clkevt);
 }
diff --git a/arch/arm/plat-pxa/Makefile b/arch/arm/plat-pxa/Makefile
index 0264bfb0ca4f..f68da35f4fb3 100644
--- a/arch/arm/plat-pxa/Makefile
+++ b/arch/arm/plat-pxa/Makefile
@@ -2,7 +2,7 @@
 # Makefile for code common across different PXA processor families
 #
-obj-y   := dma.o
+obj-y   := dma.o pmu.o
 obj-$(CONFIG_GENERIC_GPIO)      += gpio.o
 obj-$(CONFIG_PXA3xx)            += mfp.o
diff --git a/arch/arm/plat-pxa/pmu.c b/arch/arm/plat-pxa/pmu.c
new file mode 100644
index 000000000000..267ceb6feb2f
--- /dev/null
+++ b/arch/arm/plat-pxa/pmu.c
@@ -0,0 +1,33 @@
+/*
+ * PMU IRQ registration for the PXA xscale PMU families.
+ * Copyright (C) 2010 Will Deacon, ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#include <linux/platform_device.h>
+#include <asm/pmu.h>
+#include <mach/irqs.h>
+static struct resource pmu_resource = {
+        .start  = IRQ_PMU,
+        .end    = IRQ_PMU,
+        .flags  = IORESOURCE_IRQ,
+};
+static struct platform_device pmu_device = {
+        .name           = "arm-pmu",
+        .id             = ARM_PMU_DEVICE_CPU,
+        .resource       = &pmu_resource,
+        .num_resources  = 1,
+};
+static int __init pxa_pmu_init(void)
+{
+        platform_device_register(&pmu_device);
+        return 0;
+}
+arch_initcall(pxa_pmu_init);
diff --git a/arch/arm/plat-spear/Kconfig b/arch/arm/plat-spear/Kconfig
new file mode 100644
index 000000000000..1bb3dbce8810
--- /dev/null
+++ b/arch/arm/plat-spear/Kconfig
@@ -0,0 +1,31 @@
+#
+# SPEAr Platform configuration file
+#
+if PLAT_SPEAR
+choice
+        prompt "ST SPEAr Family"
+        default ARCH_SPEAR3XX
+config ARCH_SPEAR3XX
+        bool "SPEAr3XX"
+        select ARM_VIC
+        select CPU_ARM926T
+        help
+          Supports for ARM's SPEAR3XX family
+config ARCH_SPEAR6XX
+        bool "SPEAr6XX"
+        select ARM_VIC
+        select CPU_ARM926T
+        help
+          Supports for ARM's SPEAR6XX family
+endchoice
+# Adding SPEAr machine specific configuration files
+source "arch/arm/mach-spear3xx/Kconfig"
+source "arch/arm/mach-spear6xx/Kconfig"
+endif
diff --git a/arch/arm/plat-spear/Makefile b/arch/arm/plat-spear/Makefile
new file mode 100644
index 000000000000..eb89540aeda9
--- /dev/null
+++ b/arch/arm/plat-spear/Makefile
@@ -0,0 +1,8 @@
+#
+# SPEAr Platform specific Makefile
+#
+# Common support
+obj-y   := clock.o padmux.o time.o
+obj-$(CONFIG_ARCH_SPEAR3XX)     += shirq.o
diff --git a/arch/arm/plat-spear/clock.c b/arch/arm/plat-spear/clock.c
new file mode 100644
index 000000000000..ee4f90e534d8
--- /dev/null
+++ b/arch/arm/plat-spear/clock.c
@@ -0,0 +1,435 @@
+/*
+ * arch/arm/plat-spear/clock.c
+ *
+ * Clock framework for SPEAr platform
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <linux/bug.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <mach/misc_regs.h>
+#include <plat/clock.h>
+static DEFINE_SPINLOCK(clocks_lock);
+static LIST_HEAD(root_clks);
+static void propagate_rate(struct list_head *);
+static int generic_clk_enable(struct clk *clk)
+{
+        unsigned int val;
+        if (!clk->en_reg)
+                return -EFAULT;
+        val = readl(clk->en_reg);
+        if (unlikely(clk->flags & RESET_TO_ENABLE))
+                val &= ~(1 << clk->en_reg_bit);
+        else
+                val |= 1 << clk->en_reg_bit;
+        writel(val, clk->en_reg);
+        return 0;
+}
+static void generic_clk_disable(struct clk *clk)
+{
+        unsigned int val;
+        if (!clk->en_reg)
+                return;
+        val = readl(clk->en_reg);
+        if (unlikely(clk->flags & RESET_TO_ENABLE))
+                val |= 1 << clk->en_reg_bit;
+        else
+                val &= ~(1 << clk->en_reg_bit);
+        writel(val, clk->en_reg);
+}
+/* generic clk ops */
+static struct clkops generic_clkops = {
+        .enable = generic_clk_enable,
+        .disable = generic_clk_disable,
+};
+/*
+ * clk_enable - inform the system when the clock source should be running.
+ * @clk: clock source
+ *
+ * If the clock can not be enabled/disabled, this should return success.
+ *
+ * Returns success (0) or negative errno.
+ */
+int clk_enable(struct clk *clk)
+{
+        unsigned long flags;
+        int ret = 0;
+        if (!clk || IS_ERR(clk))
+                return -EFAULT;
+        spin_lock_irqsave(&clocks_lock, flags);
+        if (clk->usage_count == 0) {
+                if (clk->ops && clk->ops->enable)
+                        ret = clk->ops->enable(clk);
+        }
+        clk->usage_count++;
+        spin_unlock_irqrestore(&clocks_lock, flags);
+        return ret;
+}
+EXPORT_SYMBOL(clk_enable);
+/*
+ * clk_disable - inform the system when the clock source is no longer required.
+ * @clk: clock source
+ *
+ * Inform the system that a clock source is no longer required by
+ * a driver and may be shut down.
+ *
+ * Implementation detail: if the clock source is shared between
+ * multiple drivers, clk_enable() calls must be balanced by the
+ * same number of clk_disable() calls for the clock source to be
+ * disabled.
+ */
+void clk_disable(struct clk *clk)
+{
+        unsigned long flags;
+        if (!clk || IS_ERR(clk))
+                return;
+        WARN_ON(clk->usage_count == 0);
+        spin_lock_irqsave(&clocks_lock, flags);
+        clk->usage_count--;
+        if (clk->usage_count == 0) {
+                if (clk->ops && clk->ops->disable)
+                        clk->ops->disable(clk);
+        }
+        spin_unlock_irqrestore(&clocks_lock, flags);
+}
+EXPORT_SYMBOL(clk_disable);
+/**
+ * clk_get_rate - obtain the current clock rate (in Hz) for a clock source.
+ *               This is only valid once the clock source has been enabled.
+ * @clk: clock source
+ */
+unsigned long clk_get_rate(struct clk *clk)
+{
+        unsigned long flags, rate;
+        spin_lock_irqsave(&clocks_lock, flags);
+        rate = clk->rate;
+        spin_unlock_irqrestore(&clocks_lock, flags);
+        return rate;
+}
+EXPORT_SYMBOL(clk_get_rate);
+/**
+ * clk_set_parent - set the parent clock source for this clock
+ * @clk: clock source
+ * @parent: parent clock source
+ *
+ * Returns success (0) or negative errno.
+ */
+int clk_set_parent(struct clk *clk, struct clk *parent)
+{
+        int i, found = 0, val = 0;
+        unsigned long flags;
+        if (!clk || IS_ERR(clk) || !parent || IS_ERR(parent))
+                return -EFAULT;
+        if (clk->usage_count)
+                return -EBUSY;
+        if (!clk->pclk_sel)
+                return -EPERM;
+        if (clk->pclk == parent)
+                return 0;
+        for (i = 0; i < clk->pclk_sel->pclk_count; i++) {
+                if (clk->pclk_sel->pclk_info[i].pclk == parent) {
+                        found = 1;
+                        break;
+                }
+        }
+        if (!found)
+                return -EINVAL;
+        spin_lock_irqsave(&clocks_lock, flags);
+        /* reflect parent change in hardware */
+        val = readl(clk->pclk_sel->pclk_sel_reg);
+        val &= ~(clk->pclk_sel->pclk_sel_mask << clk->pclk_sel_shift);
+        val |= clk->pclk_sel->pclk_info[i].pclk_mask << clk->pclk_sel_shift;
+        writel(val, clk->pclk_sel->pclk_sel_reg);
+        spin_unlock_irqrestore(&clocks_lock, flags);
+        /* reflect parent change in software */
+        clk->recalc(clk);
+        propagate_rate(&clk->children);
+        return 0;
+}
+EXPORT_SYMBOL(clk_set_parent);
+/* registers clock in platform clock framework */
+void clk_register(struct clk_lookup *cl)
+{
+        struct clk *clk = cl->clk;
+        unsigned long flags;
+        if (!clk || IS_ERR(clk))
+                return;
+        spin_lock_irqsave(&clocks_lock, flags);
+        INIT_LIST_HEAD(&clk->children);
+        if (clk->flags & ALWAYS_ENABLED)
+                clk->ops = NULL;
+        else if (!clk->ops)
+                clk->ops = &generic_clkops;
+        /* root clock don't have any parents */
+        if (!clk->pclk && !clk->pclk_sel) {
+                list_add(&clk->sibling, &root_clks);
+                /* add clocks with only one parent to parent's children list */
+        } else if (clk->pclk && !clk->pclk_sel) {
+                list_add(&clk->sibling, &clk->pclk->children);
+        } else {
+                /* add clocks with > 1 parent to 1st parent's children list */
+                list_add(&clk->sibling,
+                         &clk->pclk_sel->pclk_info[0].pclk->children);
+        }
+        spin_unlock_irqrestore(&clocks_lock, flags);
+        /* add clock to arm clockdev framework */
+        clkdev_add(cl);
+}
+/**
+ * propagate_rate - recalculate and propagate all clocks in list head
+ *
+ * Recalculates all root clocks in list head, which if the clock's .recalc is
+ * set correctly, should also propagate their rates.
+ */
+static void propagate_rate(struct list_head *lhead)
+{
+        struct clk *clkp, *_temp;
+        list_for_each_entry_safe(clkp, _temp, lhead, sibling) {
+                if (clkp->recalc)
+                        clkp->recalc(clkp);
+                propagate_rate(&clkp->children);
+        }
+}
+/* returns current programmed clocks clock info structure */
+static struct pclk_info *pclk_info_get(struct clk *clk)
+{
+        unsigned int mask, i;
+        unsigned long flags;
+        struct pclk_info *info = NULL;
+        spin_lock_irqsave(&clocks_lock, flags);
+        mask = (readl(clk->pclk_sel->pclk_sel_reg) >> clk->pclk_sel_shift)
+                        & clk->pclk_sel->pclk_sel_mask;
+        for (i = 0; i < clk->pclk_sel->pclk_count; i++) {
+                if (clk->pclk_sel->pclk_info[i].pclk_mask == mask)
+                        info = &clk->pclk_sel->pclk_info[i];
+        }
+        spin_unlock_irqrestore(&clocks_lock, flags);
+        return info;
+}
+/*
+ * Set pclk as cclk's parent and add clock sibling node to current parents
+ * children list
+ */
+static void change_parent(struct clk *cclk, struct clk *pclk)
+{
+        unsigned long flags;
+        spin_lock_irqsave(&clocks_lock, flags);
+        list_del(&cclk->sibling);
+        list_add(&cclk->sibling, &pclk->children);
+        cclk->pclk = pclk;
+        spin_unlock_irqrestore(&clocks_lock, flags);
+}
+/*
+ * calculates current programmed rate of pll1
+ *
+ * In normal mode
+ * rate = (2 * M[15:8] * Fin)/(N * 2^P)
+ *
+ * In Dithered mode
+ * rate = (2 * M[15:0] * Fin)/(256 * N * 2^P)
+ */
+void pll1_clk_recalc(struct clk *clk)
+{
+        struct pll_clk_config *config = clk->private_data;
+        unsigned int num = 2, den = 0, val, mode = 0;
+        unsigned long flags;
+        spin_lock_irqsave(&clocks_lock, flags);
+        mode = (readl(config->mode_reg) >> PLL_MODE_SHIFT) &
+                PLL_MODE_MASK;
+        val = readl(config->cfg_reg);
+        /* calculate denominator */
+        den = (val >> PLL_DIV_P_SHIFT) & PLL_DIV_P_MASK;
+        den = 1 << den;
+        den *= (val >> PLL_DIV_N_SHIFT) & PLL_DIV_N_MASK;
+        /* calculate numerator & denominator */
+        if (!mode) {
+                /* Normal mode */
+                num *= (val >> PLL_NORM_FDBK_M_SHIFT) & PLL_NORM_FDBK_M_MASK;
+        } else {
+                /* Dithered mode */
+                num *= (val >> PLL_DITH_FDBK_M_SHIFT) & PLL_DITH_FDBK_M_MASK;
+                den *= 256;
+        }
+        clk->rate = (((clk->pclk->rate/10000) * num) / den) * 10000;
+        spin_unlock_irqrestore(&clocks_lock, flags);
+}
+/* calculates current programmed rate of ahb or apb bus */
+void bus_clk_recalc(struct clk *clk)
+{
+        struct bus_clk_config *config = clk->private_data;
+        unsigned int div;
+        unsigned long flags;
+        spin_lock_irqsave(&clocks_lock, flags);
+        div = ((readl(config->reg) >> config->shift) & config->mask) + 1;
+        clk->rate = (unsigned long)clk->pclk->rate / div;
+        spin_unlock_irqrestore(&clocks_lock, flags);
+}
+/*
+ * calculates current programmed rate of auxiliary synthesizers
+ * used by: UART, FIRDA
+ *
+ * Fout from synthesizer can be given from two equations:
+ * Fout1 = (Fin * X/Y)/2
+ * Fout2 = Fin * X/Y
+ *
+ * Selection of eqn 1 or 2 is programmed in register
+ */
+void aux_clk_recalc(struct clk *clk)
+{
+        struct aux_clk_config *config = clk->private_data;
+        struct pclk_info *pclk_info = NULL;
+        unsigned int num = 1, den = 1, val, eqn;
+        unsigned long flags;
+        /* get current programmed parent */
+        pclk_info = pclk_info_get(clk);
+        if (!pclk_info) {
+                spin_lock_irqsave(&clocks_lock, flags);
+                clk->pclk = NULL;
+                clk->rate = 0;
+                spin_unlock_irqrestore(&clocks_lock, flags);
+                return;
+        }
+        change_parent(clk, pclk_info->pclk);
+        spin_lock_irqsave(&clocks_lock, flags);
+        if (pclk_info->scalable) {
+                val = readl(config->synth_reg);
+                eqn = (val >> AUX_EQ_SEL_SHIFT) & AUX_EQ_SEL_MASK;
+                if (eqn == AUX_EQ1_SEL)
+                        den *= 2;
+                /* calculate numerator */
+                num = (val >> AUX_XSCALE_SHIFT) & AUX_XSCALE_MASK;
+                /* calculate denominator */
+                den *= (val >> AUX_YSCALE_SHIFT) & AUX_YSCALE_MASK;
+                val = (((clk->pclk->rate/10000) * num) / den) * 10000;
+        } else
+                val = clk->pclk->rate;
+        clk->rate = val;
+        spin_unlock_irqrestore(&clocks_lock, flags);
+}
+/*
+ * calculates current programmed rate of gpt synthesizers
+ * Fout from synthesizer can be given from below equations:
+ * Fout= Fin/((2 ^ (N+1)) * (M+1))
+ */
+void gpt_clk_recalc(struct clk *clk)
+{
+        struct aux_clk_config *config = clk->private_data;
+        struct pclk_info *pclk_info = NULL;
+        unsigned int div = 1, val;
+        unsigned long flags;
+        pclk_info = pclk_info_get(clk);
+        if (!pclk_info) {
+                spin_lock_irqsave(&clocks_lock, flags);
+                clk->pclk = NULL;
+                clk->rate = 0;
+                spin_unlock_irqrestore(&clocks_lock, flags);
+                return;
+        }
+        change_parent(clk, pclk_info->pclk);
+        spin_lock_irqsave(&clocks_lock, flags);
+        if (pclk_info->scalable) {
+                val = readl(config->synth_reg);
+                div += (val >> GPT_MSCALE_SHIFT) & GPT_MSCALE_MASK;
+                div *= 1 << (((val >> GPT_NSCALE_SHIFT) & GPT_NSCALE_MASK) + 1);
+        }
+        clk->rate = (unsigned long)clk->pclk->rate / div;
+        spin_unlock_irqrestore(&clocks_lock, flags);
+}
+/*
+ * Used for clocks that always have same value as the parent clock divided by a
+ * fixed divisor
+ */
+void follow_parent(struct clk *clk)
+{
+        unsigned long flags;
+        spin_lock_irqsave(&clocks_lock, flags);
+        clk->rate = clk->pclk->rate;
+        spin_unlock_irqrestore(&clocks_lock, flags);
+}
+/**
+ * recalc_root_clocks - recalculate and propagate all root clocks
+ *
+ * Recalculates all root clocks (clocks with no parent), which if the
+ * clock's .recalc is set correctly, should also propagate their rates.
+ */
+void recalc_root_clocks(void)
+{
+        propagate_rate(&root_clks);
+}
diff --git a/arch/arm/plat-spear/include/plat/clkdev.h b/arch/arm/plat-spear/include/plat/clkdev.h
new file mode 100644
index 000000000000..a2d0112fcaf7
--- /dev/null
+++ b/arch/arm/plat-spear/include/plat/clkdev.h
@@ -0,0 +1,20 @@
+/*
+ * arch/arm/plat-spear/include/plat/clkdev.h
+ *
+ * Clock Dev framework definitions for SPEAr platform
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#ifndef __PLAT_CLKDEV_H
+#define __PLAT_CLKDEV_H
+#define __clk_get(clk) ({ 1; })
+#define __clk_put(clk) do { } while (0)
+#endif /* __PLAT_CLKDEV_H */
diff --git a/arch/arm/plat-spear/include/plat/clock.h b/arch/arm/plat-spear/include/plat/clock.h
new file mode 100644
index 000000000000..298bafc0a52f
--- /dev/null
+++ b/arch/arm/plat-spear/include/plat/clock.h
@@ -0,0 +1,126 @@
+/*
+ * arch/arm/plat-spear/include/plat/clock.h
+ *
+ * Clock framework definitions for SPEAr platform
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#ifndef __PLAT_CLOCK_H
+#define __PLAT_CLOCK_H
+#include <linux/list.h>
+#include <asm/clkdev.h>
+#include <linux/types.h>
+/* clk structure flags */
+#define ALWAYS_ENABLED          (1 << 0) /* clock always enabled */
+#define RESET_TO_ENABLE         (1 << 1) /* reset register bit to enable clk */
+/**
+ * struct clkops - clock operations
+ * @enable: pointer to clock enable function
+ * @disable: pointer to clock disable function
+ */
+struct clkops {
+        int (*enable) (struct clk *);
+        void (*disable) (struct clk *);
+};
+/**
+ * struct pclk_info - parents info
+ * @pclk: pointer to parent clk
+ * @pclk_mask: value to be written for selecting this parent
+ * @scalable: Is parent scalable (1 - YES, 0 - NO)
+ */
+struct pclk_info {
+        struct clk *pclk;
+        u8 pclk_mask;
+        u8 scalable;
+};
+/**
+ * struct pclk_sel - parents selection configuration
+ * @pclk_info: pointer to array of parent clock info
+ * @pclk_count: number of parents
+ * @pclk_sel_reg: register for selecting a parent
+ * @pclk_sel_mask: mask for selecting parent (can be used to clear bits also)
+ */
+struct pclk_sel {
+        struct pclk_info *pclk_info;
+        u8 pclk_count;
+        unsigned int *pclk_sel_reg;
+        unsigned int pclk_sel_mask;
+};
+/**
+ * struct clk - clock structure
+ * @usage_count: num of users who enabled this clock
+ * @flags: flags for clock properties
+ * @rate: programmed clock rate in Hz
+ * @en_reg: clk enable/disable reg
+ * @en_reg_bit: clk enable/disable bit
+ * @ops: clk enable/disable ops - generic_clkops selected if NULL
+ * @recalc: pointer to clock rate recalculate function
+ * @pclk: current parent clk
+ * @pclk_sel: pointer to parent selection structure
+ * @pclk_sel_shift: register shift for selecting parent of this clock
+ * @children: list for childrens or this clock
+ * @sibling: node for list of clocks having same parents
+ * @private_data: clock specific private data
+ */
+struct clk {
+        unsigned int usage_count;
+        unsigned int flags;
+        unsigned long rate;
+        unsigned int *en_reg;
+        u8 en_reg_bit;
+        const struct clkops *ops;
+        void (*recalc) (struct clk *);
+        struct clk *pclk;
+        struct pclk_sel *pclk_sel;
+        unsigned int pclk_sel_shift;
+        struct list_head children;
+        struct list_head sibling;
+        void *private_data;
+};
+/* pll configuration structure */
+struct pll_clk_config {
+        unsigned int *mode_reg;
+        unsigned int *cfg_reg;
+};
+/* ahb and apb bus configuration structure */
+struct bus_clk_config {
+        unsigned int *reg;
+        unsigned int mask;
+        unsigned int shift;
+};
+/*
+ * Aux clk configuration structure: applicable to GPT, UART and FIRDA
+ */
+struct aux_clk_config {
+        unsigned int *synth_reg;
+};
+/* platform specific clock functions */
+void clk_register(struct clk_lookup *cl);
+void recalc_root_clocks(void);
+/* clock recalc functions */
+void follow_parent(struct clk *clk);
+void pll1_clk_recalc(struct clk *clk);
+void bus_clk_recalc(struct clk *clk);
+void gpt_clk_recalc(struct clk *clk);
+void aux_clk_recalc(struct clk *clk);
+#endif /* __PLAT_CLOCK_H */
diff --git a/arch/arm/plat-spear/include/plat/debug-macro.S b/arch/arm/plat-spear/include/plat/debug-macro.S
new file mode 100644
index 000000000000..1670734b7e51
--- /dev/null
+++ b/arch/arm/plat-spear/include/plat/debug-macro.S
@@ -0,0 +1,38 @@
+/*
+ * arch/arm/plat-spear/include/plat/debug-macro.S
+ *
+ * Debugging macro include header for spear platform
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <linux/amba/serial.h>
+#include <mach/spear.h>
+                .macro  addruart, rx
+                mrc     p15, 0, \rx, c1, c0
+                tst     \rx, #1                                 @ MMU enabled?
+                moveq   \rx, =SPEAR_DBG_UART_BASE               @ Physical base
+                movne   \rx, =VA_SPEAR_DBG_UART_BASE            @ Virtual base
+                .endm
+                .macro  senduart, rd, rx
+                strb    \rd, [\rx, #UART01x_DR]                 @ ASC_TX_BUFFER
+                .endm
+                .macro  waituart, rd, rx
+1001:           ldr     \rd, [\rx, #UART01x_FR]                 @ FLAG REGISTER
+                tst     \rd, #UART01x_FR_TXFF                   @ TX_FULL
+                bne     1001b
+                .endm
+                .macro  busyuart, rd, rx
+1002:           ldr     \rd, [\rx, #UART01x_FR]                 @ FLAG REGISTER
+                tst     \rd, #UART011_FR_TXFE                   @ TX_EMPTY
+                beq     1002b
+                .endm
diff --git a/arch/arm/plat-spear/include/plat/gpio.h b/arch/arm/plat-spear/include/plat/gpio.h
new file mode 100644
index 000000000000..b857c91257dd
--- /dev/null
+++ b/arch/arm/plat-spear/include/plat/gpio.h
@@ -0,0 +1,24 @@
+/*
+ * arch/arm/plat-spear/include/plat/gpio.h
+ *
+ * GPIO macros for SPEAr platform
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#ifndef __PLAT_GPIO_H
+#define __PLAT_GPIO_H
+#include <asm-generic/gpio.h>
+#define gpio_get_value  __gpio_get_value
+#define gpio_set_value  __gpio_set_value
+#define gpio_cansleep   __gpio_cansleep
+#define gpio_to_irq     __gpio_to_irq
+#endif /* __PLAT_GPIO_H */
diff --git a/arch/arm/plat-spear/include/plat/io.h b/arch/arm/plat-spear/include/plat/io.h
new file mode 100644
index 000000000000..4d4ba822b3eb
--- /dev/null
+++ b/arch/arm/plat-spear/include/plat/io.h
@@ -0,0 +1,22 @@
+/*
+ * arch/arm/plat-spear/include/plat/io.h
+ *
+ * IO definitions for SPEAr platform
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#ifndef __PLAT_IO_H
+#define __PLAT_IO_H
+#define IO_SPACE_LIMIT          0xFFFFFFFF
+#define __io(a)                 __typesafe_io(a)
+#define __mem_pci(a)            (a)
+#endif /* __PLAT_IO_H */
diff --git a/arch/arm/plat-spear/include/plat/memory.h b/arch/arm/plat-spear/include/plat/memory.h
new file mode 100644
index 000000000000..27a4aba77343
--- /dev/null
+++ b/arch/arm/plat-spear/include/plat/memory.h
@@ -0,0 +1,20 @@
+/*
+ * arch/arm/plat-spear/include/plat/memory.h
+ *
+ * Memory map for SPEAr platform
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#ifndef __PLAT_MEMORY_H
+#define __PLAT_MEMORY_H
+/* Physical DRAM offset */
+#define PHYS_OFFSET             UL(0x00000000)
+#endif /* __PLAT_MEMORY_H */
diff --git a/arch/arm/plat-spear/include/plat/padmux.h b/arch/arm/plat-spear/include/plat/padmux.h
new file mode 100644
index 000000000000..877f3adcf610
--- /dev/null
+++ b/arch/arm/plat-spear/include/plat/padmux.h
@@ -0,0 +1,92 @@
+/*
+ * arch/arm/plat-spear/include/plat/padmux.h
+ *
+ * SPEAr platform specific gpio pads muxing file
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#ifndef __PLAT_PADMUX_H
+#define __PLAT_PADMUX_H
+#include <linux/types.h>
+/*
+ * struct pmx_reg: configuration structure for mode reg and mux reg
+ *
+ * offset: offset of mode reg
+ * mask: mask of mode reg
+ */
+struct pmx_reg {
+        u32 offset;
+        u32 mask;
+};
+/*
+ * struct pmx_dev_mode: configuration structure every group of modes of a device
+ *
+ * ids: all modes for this configuration
+ * mask: mask for supported mode
+ */
+struct pmx_dev_mode {
+        u32 ids;
+        u32 mask;
+};
+/*
+ * struct pmx_mode: mode definition structure
+ *
+ * name: mode name
+ * mask: mode mask
+ */
+struct pmx_mode {
+        char *name;
+        u32 id;
+        u32 mask;
+};
+/*
+ * struct pmx_dev: device definition structure
+ *
+ * name: device name
+ * modes: device configuration array for different modes supported
+ * mode_count: size of modes array
+ * is_active: is peripheral active/enabled
+ * enb_on_reset: if 1, mask bits to be cleared in reg otherwise to be set in reg
+ */
+struct pmx_dev {
+        char *name;
+        struct pmx_dev_mode *modes;
+        u8 mode_count;
+        bool is_active;
+        bool enb_on_reset;
+};
+/*
+ * struct pmx_driver: driver definition structure
+ *
+ * mode: mode to be set
+ * devs: array of pointer to pmx devices
+ * devs_count: ARRAY_SIZE of devs
+ * base: base address of soc config registers
+ * mode_reg: structure of mode config register
+ * mux_reg: structure of device mux config register
+ */
+struct pmx_driver {
+        struct pmx_mode *mode;
+        struct pmx_dev **devs;
+        u8 devs_count;
+        u32 *base;
+        struct pmx_reg mode_reg;
+        struct pmx_reg mux_reg;
+};
+/* pmx functions */
+int pmx_register(struct pmx_driver *driver);
+#endif /* __PLAT_PADMUX_H */
diff --git a/arch/arm/plat-spear/include/plat/shirq.h b/arch/arm/plat-spear/include/plat/shirq.h
new file mode 100644
index 000000000000..03ed8b585dcf
--- /dev/null
+++ b/arch/arm/plat-spear/include/plat/shirq.h
@@ -0,0 +1,73 @@
+/*
+ * arch/arm/plat-spear/include/plat/shirq.h
+ *
+ * SPEAr platform shared irq layer header file
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#ifndef __PLAT_SHIRQ_H
+#define __PLAT_SHIRQ_H
+#include <linux/irq.h>
+#include <linux/types.h>
+/*
+ * struct shirq_dev_config: shared irq device configuration
+ *
+ * virq: virtual irq number of device
+ * enb_mask: enable mask of device
+ * status_mask: status mask of device
+ * clear_mask: clear mask of device
+ */
+struct shirq_dev_config {
+        u32 virq;
+        u32 enb_mask;
+        u32 status_mask;
+        u32 clear_mask;
+};
+/*
+ * struct shirq_regs: shared irq register configuration
+ *
+ * base: base address of shared irq register
+ * enb_reg: enable register offset
+ * reset_to_enb: val 1 indicates, we need to clear bit for enabling interrupt
+ * status_reg: status register offset
+ * status_reg_mask: status register valid mask
+ * clear_reg: clear register offset
+ * reset_to_clear: val 1 indicates, we need to clear bit for clearing interrupt
+ */
+struct shirq_regs {
+        void __iomem *base;
+        u32 enb_reg;
+        u32 reset_to_enb;
+        u32 status_reg;
+        u32 status_reg_mask;
+        u32 clear_reg;
+        u32 reset_to_clear;
+};
+/*
+ * struct spear_shirq: shared irq structure
+ *
+ * irq: hardware irq number
+ * dev_config: array of device config structures which are using "irq" line
+ * dev_count: size of dev_config array
+ * regs: register configuration for shared irq block
+ */
+struct spear_shirq {
+        u32 irq;
+        struct shirq_dev_config *dev_config;
+        u32 dev_count;
+        struct shirq_regs regs;
+};
+int spear_shirq_register(struct spear_shirq *shirq);
+#endif /* __PLAT_SHIRQ_H */
diff --git a/arch/arm/plat-spear/include/plat/system.h b/arch/arm/plat-spear/include/plat/system.h
new file mode 100644
index 000000000000..55a4e405d578
--- /dev/null
+++ b/arch/arm/plat-spear/include/plat/system.h
@@ -0,0 +1,41 @@
+/*
+ * arch/arm/plat-spear/include/plat/system.h
+ *
+ * SPEAr platform specific architecture functions
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#ifndef __PLAT_SYSTEM_H
+#define __PLAT_SYSTEM_H
+#include <asm/hardware/sp810.h>
+#include <linux/io.h>
+#include <mach/spear.h>
+static inline void arch_idle(void)
+{
+        /*
+         * This should do all the clock switching
+         * and wait for interrupt tricks
+         */
+        cpu_do_idle();
+}
+static inline void arch_reset(char mode, const char *cmd)
+{
+        if (mode == 's') {
+                /* software reset, Jump into ROM at address 0 */
+                cpu_reset(0);
+        } else {
+                /* hardware reset, Use on-chip reset capability */
+                sysctl_soft_reset((void __iomem *)VA_SPEAR_SYS_CTRL_BASE);
+        }
+}
+#endif /* __PLAT_SYSTEM_H */
diff --git a/arch/arm/plat-spear/include/plat/timex.h b/arch/arm/plat-spear/include/plat/timex.h
new file mode 100644
index 000000000000..914d09dd50fd
--- /dev/null
+++ b/arch/arm/plat-spear/include/plat/timex.h
@@ -0,0 +1,19 @@
+/*
+ * arch/arm/plat-spear/include/plat/timex.h
+ *
+ * SPEAr platform specific timex definitions
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#ifndef __PLAT_TIMEX_H
+#define __PLAT_TIMEX_H
+#define CLOCK_TICK_RATE                 48000000
+#endif /* __PLAT_TIMEX_H */
diff --git a/arch/arm/plat-spear/include/plat/uncompress.h b/arch/arm/plat-spear/include/plat/uncompress.h
new file mode 100644
index 000000000000..99ba6789cc97
--- /dev/null
+++ b/arch/arm/plat-spear/include/plat/uncompress.h
@@ -0,0 +1,43 @@
+/*
+ * arch/arm/plat-spear/include/plat/uncompress.h
+ *
+ * Serial port stubs for kernel decompress status messages
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <linux/io.h>
+#include <linux/amba/serial.h>
+#include <mach/spear.h>
+#ifndef __PLAT_UNCOMPRESS_H
+#define __PLAT_UNCOMPRESS_H
+/*
+ * This does not append a newline
+ */
+static inline void putc(int c)
+{
+        void __iomem *base = (void __iomem *)SPEAR_DBG_UART_BASE;
+        while (readl(base + UART01x_FR) & UART01x_FR_TXFF)
+                barrier();
+        writel(c, base + UART01x_DR);
+}
+static inline void flush(void)
+{
+}
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
+#endif /* __PLAT_UNCOMPRESS_H */
diff --git a/arch/arm/plat-spear/include/plat/vmalloc.h b/arch/arm/plat-spear/include/plat/vmalloc.h
new file mode 100644
index 000000000000..09e9372aea21
--- /dev/null
+++ b/arch/arm/plat-spear/include/plat/vmalloc.h
@@ -0,0 +1,19 @@
+/*
+ * arch/arm/plat-spear/include/plat/vmalloc.h
+ *
+ * Defining Vmalloc area for SPEAr platform
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#ifndef __PLAT_VMALLOC_H
+#define __PLAT_VMALLOC_H
+#define VMALLOC_END             0xF0000000
+#endif /* __PLAT_VMALLOC_H */
diff --git a/arch/arm/plat-spear/padmux.c b/arch/arm/plat-spear/padmux.c
new file mode 100644
index 000000000000..d2aab3adcdeb
--- /dev/null
+++ b/arch/arm/plat-spear/padmux.c
@@ -0,0 +1,164 @@
+/*
+ * arch/arm/plat-spear/include/plat/padmux.c
+ *
+ * SPEAr platform specific gpio pads muxing source file
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <plat/padmux.h>
+/*
+ * struct pmx: pmx definition structure
+ *
+ * base: base address of configuration registers
+ * mode_reg: mode configurations
+ * mux_reg: muxing configurations
+ * active_mode: pointer to current active mode
+ */
+struct pmx {
+        u32 base;
+        struct pmx_reg mode_reg;
+        struct pmx_reg mux_reg;
+        struct pmx_mode *active_mode;
+};
+static struct pmx *pmx;
+/**
+ * pmx_mode_set - Enables an multiplexing mode
+ * @mode - pointer to pmx mode
+ *
+ * It will set mode of operation in hardware.
+ * Returns -ve on Err otherwise 0
+ */
+static int pmx_mode_set(struct pmx_mode *mode)
+{
+        u32 val;
+        if (!mode->name)
+                return -EFAULT;
+        pmx->active_mode = mode;
+        val = readl(pmx->base + pmx->mode_reg.offset);
+        val &= ~pmx->mode_reg.mask;
+        val |= mode->mask & pmx->mode_reg.mask;
+        writel(val, pmx->base + pmx->mode_reg.offset);
+        return 0;
+}
+/**
+ * pmx_devs_enable - Enables list of devices
+ * @devs - pointer to pmx device array
+ * @count - number of devices to enable
+ *
+ * It will enable pads for all required peripherals once and only once.
+ * If peripheral is not supported by current mode then request is rejected.
+ * Conflicts between peripherals are not handled and peripherals will be
+ * enabled in the order they are present in pmx_dev array.
+ * In case of conflicts last peripheral enalbed will be present.
+ * Returns -ve on Err otherwise 0
+ */
+static int pmx_devs_enable(struct pmx_dev **devs, u8 count)
+{
+        u32 val, i, mask;
+        if (!count)
+                return -EINVAL;
+        val = readl(pmx->base + pmx->mux_reg.offset);
+        for (i = 0; i < count; i++) {
+                u8 j = 0;
+                if (!devs[i]->name || !devs[i]->modes) {
+                        printk(KERN_ERR "padmux: dev name or modes is null\n");
+                        continue;
+                }
+                /* check if peripheral exists in active mode */
+                if (pmx->active_mode) {
+                        bool found = false;
+                        for (j = 0; j < devs[i]->mode_count; j++) {
+                                if (devs[i]->modes[j].ids &
+                                                pmx->active_mode->id) {
+                                        found = true;
+                                        break;
+                                }
+                        }
+                        if (found == false) {
+                                printk(KERN_ERR "%s device not available in %s"\
+                                                "mode\n", devs[i]->name,
+                                                pmx->active_mode->name);
+                                continue;
+                        }
+                }
+                /* enable peripheral */
+                mask = devs[i]->modes[j].mask & pmx->mux_reg.mask;
+                if (devs[i]->enb_on_reset)
+                        val &= ~mask;
+                else
+                        val |= mask;
+                devs[i]->is_active = true;
+        }
+        writel(val, pmx->base + pmx->mux_reg.offset);
+        kfree(pmx);
+        /* this will ensure that multiplexing can't be changed now */
+        pmx = (struct pmx *)-1;
+        return 0;
+}
+/**
+ * pmx_register - registers a platform requesting pad mux feature
+ * @driver - pointer to driver structure containing driver specific parameters
+ *
+ * Also this must be called only once. This will allocate memory for pmx
+ * structure, will call pmx_mode_set, will call pmx_devs_enable.
+ * Returns -ve on Err otherwise 0
+ */
+int pmx_register(struct pmx_driver *driver)
+{
+        int ret = 0;
+        if (pmx)
+                return -EPERM;
+        if (!driver->base || !driver->devs)
+                return -EFAULT;
+        pmx = kzalloc(sizeof(*pmx), GFP_KERNEL);
+        if (!pmx)
+                return -ENOMEM;
+        pmx->base = (u32)driver->base;
+        pmx->mode_reg.offset = driver->mode_reg.offset;
+        pmx->mode_reg.mask = driver->mode_reg.mask;
+        pmx->mux_reg.offset = driver->mux_reg.offset;
+        pmx->mux_reg.mask = driver->mux_reg.mask;
+        /* choose mode to enable */
+        if (driver->mode) {
+                ret = pmx_mode_set(driver->mode);
+                if (ret)
+                        goto pmx_fail;
+        }
+        ret = pmx_devs_enable(driver->devs, driver->devs_count);
+        if (ret)
+                goto pmx_fail;
+        return 0;
+pmx_fail:
+        return ret;
+}
diff --git a/arch/arm/plat-spear/shirq.c b/arch/arm/plat-spear/shirq.c
new file mode 100644
index 000000000000..2172d6946aea
--- /dev/null
+++ b/arch/arm/plat-spear/shirq.c
@@ -0,0 +1,118 @@
+/*
+ * arch/arm/plat-spear/shirq.c
+ *
+ * SPEAr platform shared irq layer source file
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/spinlock.h>
+#include <plat/shirq.h>
+struct spear_shirq *shirq;
+static DEFINE_SPINLOCK(lock);
+static void shirq_irq_mask(unsigned irq)
+{
+        struct spear_shirq *shirq = get_irq_chip_data(irq);
+        u32 val, id = irq - shirq->dev_config[0].virq;
+        unsigned long flags;
+        if ((shirq->regs.enb_reg == -1) || shirq->dev_config[id].enb_mask == -1)
+                return;
+        spin_lock_irqsave(&lock, flags);
+        val = readl(shirq->regs.base + shirq->regs.enb_reg);
+        if (shirq->regs.reset_to_enb)
+                val |= shirq->dev_config[id].enb_mask;
+        else
+                val &= ~(shirq->dev_config[id].enb_mask);
+        writel(val, shirq->regs.base + shirq->regs.enb_reg);
+        spin_unlock_irqrestore(&lock, flags);
+}
+static void shirq_irq_unmask(unsigned irq)
+{
+        struct spear_shirq *shirq = get_irq_chip_data(irq);
+        u32 val, id = irq - shirq->dev_config[0].virq;
+        unsigned long flags;
+        if ((shirq->regs.enb_reg == -1) || shirq->dev_config[id].enb_mask == -1)
+                return;
+        spin_lock_irqsave(&lock, flags);
+        val = readl(shirq->regs.base + shirq->regs.enb_reg);
+        if (shirq->regs.reset_to_enb)
+                val &= ~(shirq->dev_config[id].enb_mask);
+        else
+                val |= shirq->dev_config[id].enb_mask;
+        writel(val, shirq->regs.base + shirq->regs.enb_reg);
+        spin_unlock_irqrestore(&lock, flags);
+}
+static struct irq_chip shirq_chip = {
+        .name           = "spear_shirq",
+        .ack            = shirq_irq_mask,
+        .mask           = shirq_irq_mask,
+        .unmask         = shirq_irq_unmask,
+};
+static void shirq_handler(unsigned irq, struct irq_desc *desc)
+{
+        u32 i, val, mask;
+        struct spear_shirq *shirq = get_irq_data(irq);
+        desc->chip->ack(irq);
+        while ((val = readl(shirq->regs.base + shirq->regs.status_reg) &
+                                shirq->regs.status_reg_mask)) {
+                for (i = 0; (i < shirq->dev_count) && val; i++) {
+                        if (!(shirq->dev_config[i].status_mask & val))
+                                continue;
+                        generic_handle_irq(shirq->dev_config[i].virq);
+                        /* clear interrupt */
+                        val &= ~shirq->dev_config[i].status_mask;
+                        if ((shirq->regs.clear_reg == -1) ||
+                                        shirq->dev_config[i].clear_mask == -1)
+                                continue;
+                        mask = readl(shirq->regs.base + shirq->regs.clear_reg);
+                        if (shirq->regs.reset_to_clear)
+                                mask &= ~shirq->dev_config[i].clear_mask;
+                        else
+                                mask |= shirq->dev_config[i].clear_mask;
+                        writel(mask, shirq->regs.base + shirq->regs.clear_reg);
+                }
+        }
+        desc->chip->unmask(irq);
+}
+int spear_shirq_register(struct spear_shirq *shirq)
+{
+        int i;
+        if (!shirq || !shirq->dev_config || !shirq->regs.base)
+                return -EFAULT;
+        if (!shirq->dev_count)
+                return -EINVAL;
+        set_irq_chained_handler(shirq->irq, shirq_handler);
+        for (i = 0; i < shirq->dev_count; i++) {
+                set_irq_chip(shirq->dev_config[i].virq, &shirq_chip);
+                set_irq_handler(shirq->dev_config[i].virq, handle_simple_irq);
+                set_irq_flags(shirq->dev_config[i].virq, IRQF_VALID);
+                set_irq_chip_data(shirq->dev_config[i].virq, shirq);
+        }
+        set_irq_data(shirq->irq, shirq);
+        return 0;
+}
diff --git a/arch/arm/plat-spear/time.c b/arch/arm/plat-spear/time.c
new file mode 100644
index 000000000000..a1025d38f383
--- /dev/null
+++ b/arch/arm/plat-spear/time.c
@@ -0,0 +1,292 @@
+/*
+ * arch/arm/plat-spear/time.c
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Shiraz Hashim<shiraz.hashim@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <linux/clk.h>
+#include <linux/clockchips.h>
+#include <linux/clocksource.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/time.h>
+#include <linux/irq.h>
+#include <asm/mach/time.h>
+#include <mach/irqs.h>
+#include <mach/hardware.h>
+#include <mach/spear.h>
+#include <mach/generic.h>
+/*
+ * We would use TIMER0 and TIMER1 as clockevent and clocksource.
+ * Timer0 and Timer1 both belong to same gpt block in cpu subbsystem. Further
+ * they share same functional clock. Any change in one's functional clock will
+ * also affect other timer.
+ */
+#define CLKEVT  0       /* gpt0, channel0 as clockevent */
+#define CLKSRC  1       /* gpt0, channel1 as clocksource */
+/* Register offsets, x is channel number */
+#define CR(x)           ((x) * 0x80 + 0x80)
+#define IR(x)           ((x) * 0x80 + 0x84)
+#define LOAD(x)         ((x) * 0x80 + 0x88)
+#define COUNT(x)        ((x) * 0x80 + 0x8C)
+/* Reg bit definitions */
+#define CTRL_INT_ENABLE         0x0100
+#define CTRL_ENABLE             0x0020
+#define CTRL_ONE_SHOT           0x0010
+#define CTRL_PRESCALER1         0x0
+#define CTRL_PRESCALER2         0x1
+#define CTRL_PRESCALER4         0x2
+#define CTRL_PRESCALER8         0x3
+#define CTRL_PRESCALER16        0x4
+#define CTRL_PRESCALER32        0x5
+#define CTRL_PRESCALER64        0x6
+#define CTRL_PRESCALER128       0x7
+#define CTRL_PRESCALER256       0x8
+#define INT_STATUS              0x1
+static __iomem void *gpt_base;
+static struct clk *gpt_clk;
+static void clockevent_set_mode(enum clock_event_mode mode,
+                                struct clock_event_device *clk_event_dev);
+static int clockevent_next_event(unsigned long evt,
+                                 struct clock_event_device *clk_event_dev);
+/*
+ * Following clocksource_set_clock and clockevent_set_clock picked
+ * from arch/mips/kernel/time.c
+ */
+void __init clocksource_set_clock(struct clocksource *cs, unsigned int clock)
+{
+        u64 temp;
+        u32 shift;
+        /* Find a shift value */
+        for (shift = 32; shift > 0; shift--) {
+                temp = (u64) NSEC_PER_SEC << shift;
+                do_div(temp, clock);
+                if ((temp >> 32) == 0)
+                        break;
+        }
+        cs->shift = shift;
+        cs->mult = (u32) temp;
+}
+void __init clockevent_set_clock(struct clock_event_device *cd,
+        unsigned int clock)
+{
+        u64 temp;
+        u32 shift;
+        /* Find a shift value */
+        for (shift = 32; shift > 0; shift--) {
+                temp = (u64) clock << shift;
+                do_div(temp, NSEC_PER_SEC);
+                if ((temp >> 32) == 0)
+                        break;
+        }
+        cd->shift = shift;
+        cd->mult = (u32) temp;
+}
+static cycle_t clocksource_read_cycles(struct clocksource *cs)
+{
+        return (cycle_t) readw(gpt_base + COUNT(CLKSRC));
+}
+static struct clocksource clksrc = {
+        .name = "tmr1",
+        .rating = 200,          /* its a pretty decent clock */
+        .read = clocksource_read_cycles,
+        .mask = 0xFFFF,         /* 16 bits */
+        .mult = 0,              /* to be computed */
+        .shift = 0,             /* to be computed */
+        .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+};
+static void spear_clocksource_init(void)
+{
+        u32 tick_rate;
+        u16 val;
+        /* program the prescaler (/256)*/
+        writew(CTRL_PRESCALER256, gpt_base + CR(CLKSRC));
+        /* find out actual clock driving Timer */
+        tick_rate = clk_get_rate(gpt_clk);
+        tick_rate >>= CTRL_PRESCALER256;
+        writew(0xFFFF, gpt_base + LOAD(CLKSRC));
+        val = readw(gpt_base + CR(CLKSRC));
+        val &= ~CTRL_ONE_SHOT;  /* autoreload mode */
+        val |= CTRL_ENABLE ;
+        writew(val, gpt_base + CR(CLKSRC));
+        clocksource_set_clock(&clksrc, tick_rate);
+        /* register the clocksource */
+        clocksource_register(&clksrc);
+}
+static struct clock_event_device clkevt = {
+        .name = "tmr0",
+        .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
+        .set_mode = clockevent_set_mode,
+        .set_next_event = clockevent_next_event,
+        .shift = 0,     /* to be computed */
+};
+static void clockevent_set_mode(enum clock_event_mode mode,
+                                struct clock_event_device *clk_event_dev)
+{
+        u32 period;
+        u16 val;
+        /* stop the timer */
+        val = readw(gpt_base + CR(CLKEVT));
+        val &= ~CTRL_ENABLE;
+        writew(val, gpt_base + CR(CLKEVT));
+        switch (mode) {
+        case CLOCK_EVT_MODE_PERIODIC:
+                period = clk_get_rate(gpt_clk) / HZ;
+                period >>= CTRL_PRESCALER16;
+                writew(period, gpt_base + LOAD(CLKEVT));
+                val = readw(gpt_base + CR(CLKEVT));
+                val &= ~CTRL_ONE_SHOT;
+                val |= CTRL_ENABLE | CTRL_INT_ENABLE;
+                writew(val, gpt_base + CR(CLKEVT));
+                break;
+        case CLOCK_EVT_MODE_ONESHOT:
+                val = readw(gpt_base + CR(CLKEVT));
+                val |= CTRL_ONE_SHOT;
+                writew(val, gpt_base + CR(CLKEVT));
+                break;
+        case CLOCK_EVT_MODE_UNUSED:
+        case CLOCK_EVT_MODE_SHUTDOWN:
+        case CLOCK_EVT_MODE_RESUME:
+                break;
+        default:
+                pr_err("Invalid mode requested\n");
+                break;
+        }
+}
+static int clockevent_next_event(unsigned long cycles,
+                                 struct clock_event_device *clk_event_dev)
+{
+        u16 val;
+        writew(cycles, gpt_base + LOAD(CLKEVT));
+        val = readw(gpt_base + CR(CLKEVT));
+        val |= CTRL_ENABLE | CTRL_INT_ENABLE;
+        writew(val, gpt_base + CR(CLKEVT));
+        return 0;
+}
+static irqreturn_t spear_timer_interrupt(int irq, void *dev_id)
+{
+        struct clock_event_device *evt = &clkevt;
+        writew(INT_STATUS, gpt_base + IR(CLKEVT));
+        evt->event_handler(evt);
+        return IRQ_HANDLED;
+}
+static struct irqaction spear_timer_irq = {
+        .name = "timer",
+        .flags = IRQF_DISABLED | IRQF_TIMER,
+        .handler = spear_timer_interrupt
+};
+static void __init spear_clockevent_init(void)
+{
+        u32 tick_rate;
+        /* program the prescaler */
+        writew(CTRL_PRESCALER16, gpt_base + CR(CLKEVT));
+        tick_rate = clk_get_rate(gpt_clk);
+        tick_rate >>= CTRL_PRESCALER16;
+        clockevent_set_clock(&clkevt, tick_rate);
+        clkevt.max_delta_ns = clockevent_delta2ns(0xfff0,
+                        &clkevt);
+        clkevt.min_delta_ns = clockevent_delta2ns(3, &clkevt);
+        clkevt.cpumask = cpumask_of(0);
+        clockevents_register_device(&clkevt);
+        setup_irq(SPEAR_GPT0_CHAN0_IRQ, &spear_timer_irq);
+}
+void __init spear_setup_timer(void)
+{
+        struct clk *pll3_clk;
+        if (!request_mem_region(SPEAR_GPT0_BASE, SZ_1K, "gpt0")) {
+                pr_err("%s:cannot get IO addr\n", __func__);
+                return;
+        }
+        gpt_base = (void __iomem *)ioremap(SPEAR_GPT0_BASE, SZ_1K);
+        if (!gpt_base) {
+                pr_err("%s:ioremap failed for gpt\n", __func__);
+                goto err_mem;
+        }
+        gpt_clk = clk_get_sys("gpt0", NULL);
+        if (!gpt_clk) {
+                pr_err("%s:couldn't get clk for gpt\n", __func__);
+                goto err_iomap;
+        }
+        pll3_clk = clk_get(NULL, "pll3_48m_clk");
+        if (!pll3_clk) {
+                pr_err("%s:couldn't get PLL3 as parent for gpt\n", __func__);
+                goto err_iomap;
+        }
+        clk_set_parent(gpt_clk, pll3_clk);
+        spear_clockevent_init();
+        spear_clocksource_init();
+        return;
+err_iomap:
+        iounmap(gpt_base);
+err_mem:
+        release_mem_region(SPEAR_GPT0_BASE, SZ_1K);
+}
+struct sys_timer spear_sys_timer = {
+        .init = spear_setup_timer,
+};
diff --git a/arch/arm/plat-versatile/Makefile b/arch/arm/plat-versatile/Makefile
new file mode 100644
index 000000000000..9b1a66816aa6
--- /dev/null
+++ b/arch/arm/plat-versatile/Makefile
@@ -0,0 +1,4 @@
+obj-y   := clock.o
+obj-$(CONFIG_ARM_TIMER_SP804) += timer-sp.o
+obj-$(CONFIG_ARCH_REALVIEW) += sched-clock.o
+obj-$(CONFIG_ARCH_VERSATILE) += sched-clock.o
diff --git a/arch/arm/mach-integrator/clock.c b/arch/arm/plat-versatile/clock.c
index 989ecf5f5c46..5c8b6564fdc2 100644
--- a/arch/arm/mach-integrator/clock.c
+++ b/arch/arm/plat-versatile/clock.c
@@ -1,5 +1,5 @@
 /*
- *  linux/arch/arm/mach-integrator/clock.c
+ *  linux/arch/arm/plat-versatile/clock.c
 *
 *  Copyright (C) 2004 ARM Limited.
 *  Written by Deep Blue Solutions Limited.
@@ -14,7 +14,8 @@
 #include <linux/clk.h>
 #include <linux/mutex.h>
-#include <asm/clkdev.h>
+#include <asm/hardware/icst.h>
 #include <mach/clkdev.h>
 int clk_enable(struct clk *clk)
@@ -36,24 +37,38 @@ EXPORT_SYMBOL(clk_get_rate);
 long clk_round_rate(struct clk *clk, unsigned long rate)
 {
-        struct icst525_vco vco;
+        long ret = -EIO;
-        vco = icst525_khz_to_vco(clk->params, rate / 1000);
+        if (clk->ops && clk->ops->round)
-        return icst525_khz(clk->params, vco) * 1000;
+                ret = clk->ops->round(clk, rate);
+        return ret;
 }
 EXPORT_SYMBOL(clk_round_rate);
 int clk_set_rate(struct clk *clk, unsigned long rate)
 {
        int ret = -EIO;
+        if (clk->ops && clk->ops->set)
-        if (clk->setvco) {
+                ret = clk->ops->set(clk, rate);
-                struct icst525_vco vco;
-                vco = icst525_khz_to_vco(clk->params, rate / 1000);
-                clk->rate = icst525_khz(clk->params, vco) * 1000;
-                clk->setvco(clk, vco);
-                ret = 0;
-        }
        return ret;
 }
 EXPORT_SYMBOL(clk_set_rate);
+long icst_clk_round(struct clk *clk, unsigned long rate)
+{
+        struct icst_vco vco;
+        vco = icst_hz_to_vco(clk->params, rate);
+        return icst_hz(clk->params, vco);
+}
+EXPORT_SYMBOL(icst_clk_round);
+int icst_clk_set(struct clk *clk, unsigned long rate)
+{
+        struct icst_vco vco;
+        vco = icst_hz_to_vco(clk->params, rate);
+        clk->rate = icst_hz(clk->params, vco);
+        clk->ops->setvco(clk, vco);
+        return 0;
+}
+EXPORT_SYMBOL(icst_clk_set);
diff --git a/arch/arm/plat-versatile/include/plat/clock.h b/arch/arm/plat-versatile/include/plat/clock.h
new file mode 100644
index 000000000000..3cfb024ccd70
--- /dev/null
+++ b/arch/arm/plat-versatile/include/plat/clock.h
@@ -0,0 +1,15 @@
+#ifndef PLAT_CLOCK_H
+#define PLAT_CLOCK_H
+#include <asm/hardware/icst.h>
+struct clk_ops {
+        long    (*round)(struct clk *, unsigned long);
+        int     (*set)(struct clk *, unsigned long);
+        void    (*setvco)(struct clk *, struct icst_vco);
+};
+int icst_clk_set(struct clk *, unsigned long);
+long icst_clk_round(struct clk *, unsigned long);
+#endif
diff --git a/arch/arm/plat-versatile/include/plat/timer-sp.h b/arch/arm/plat-versatile/include/plat/timer-sp.h
new file mode 100644
index 000000000000..21e75e30d497
--- /dev/null
+++ b/arch/arm/plat-versatile/include/plat/timer-sp.h
@@ -0,0 +1,2 @@
+void sp804_clocksource_init(void __iomem *);
+void sp804_clockevents_init(void __iomem *, unsigned int);
diff --git a/arch/arm/plat-versatile/sched-clock.c b/arch/arm/plat-versatile/sched-clock.c
new file mode 100644
index 000000000000..9768cf7e83d7
--- /dev/null
+++ b/arch/arm/plat-versatile/sched-clock.c
@@ -0,0 +1,53 @@
+/*
+ *  linux/arch/arm/plat-versatile/sched-clock.c
+ *
+ *  Copyright (C) 1999 - 2003 ARM Limited
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#include <linux/cnt32_to_63.h>
+#include <linux/io.h>
+#include <asm/div64.h>
+#include <mach/hardware.h>
+#include <mach/platform.h>
+#ifdef VERSATILE_SYS_BASE
+#define REFCOUNTER      (__io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_24MHz_OFFSET)
+#endif
+#ifdef REALVIEW_SYS_BASE
+#define REFCOUNTER      (__io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_24MHz_OFFSET)
+#endif
+/*
+ * This is the Realview and Versatile sched_clock implementation.  This
+ * has a resolution of 41.7ns, and a maximum value of about 35583 days.
+ *
+ * The return value is guaranteed to be monotonic in that range as
+ * long as there is always less than 89 seconds between successive
+ * calls to this function.
+ */
+unsigned long long sched_clock(void)
+{
+        unsigned long long v = cnt32_to_63(readl(REFCOUNTER));
+        /* the <<1 gets rid of the cnt_32_to_63 top bit saving on a bic insn */
+        v *= 125<<1;
+        do_div(v, 3<<1);
+        return v;
+}
diff --git a/arch/arm/plat-versatile/timer-sp.c b/arch/arm/plat-versatile/timer-sp.c
new file mode 100644
index 000000000000..fb0d1c299718
--- /dev/null
+++ b/arch/arm/plat-versatile/timer-sp.c
@@ -0,0 +1,156 @@
+/*
+ *  linux/arch/arm/plat-versatile/timer-sp.c
+ *
+ *  Copyright (C) 1999 - 2003 ARM Limited
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#include <linux/clocksource.h>
+#include <linux/clockchips.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <asm/hardware/arm_timer.h>
+#include <plat/timer-sp.h>
+/*
+ * These timers are currently always setup to be clocked at 1MHz.
+ */
+#define TIMER_FREQ_KHZ  (1000)
+#define TIMER_RELOAD    (TIMER_FREQ_KHZ * 1000 / HZ)
+static void __iomem *clksrc_base;
+static cycle_t sp804_read(struct clocksource *cs)
+{
+        return ~readl(clksrc_base + TIMER_VALUE);
+}
+static struct clocksource clocksource_sp804 = {
+        .name           = "timer3",
+        .rating         = 200,
+        .read           = sp804_read,
+        .mask           = CLOCKSOURCE_MASK(32),
+        .shift          = 20,
+        .flags          = CLOCK_SOURCE_IS_CONTINUOUS,
+};
+void __init sp804_clocksource_init(void __iomem *base)
+{
+        struct clocksource *cs = &clocksource_sp804;
+        clksrc_base = base;
+        /* setup timer 0 as free-running clocksource */
+        writel(0, clksrc_base + TIMER_CTRL);
+        writel(0xffffffff, clksrc_base + TIMER_LOAD);
+        writel(0xffffffff, clksrc_base + TIMER_VALUE);
+        writel(TIMER_CTRL_32BIT | TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC,
+                clksrc_base + TIMER_CTRL);
+        cs->mult = clocksource_khz2mult(TIMER_FREQ_KHZ, cs->shift);
+        clocksource_register(cs);
+}
+static void __iomem *clkevt_base;
+/*
+ * IRQ handler for the timer
+ */
+static irqreturn_t sp804_timer_interrupt(int irq, void *dev_id)
+{
+        struct clock_event_device *evt = dev_id;
+        /* clear the interrupt */
+        writel(1, clkevt_base + TIMER_INTCLR);
+        evt->event_handler(evt);
+        return IRQ_HANDLED;
+}
+static void sp804_set_mode(enum clock_event_mode mode,
+        struct clock_event_device *evt)
+{
+        unsigned long ctrl = TIMER_CTRL_32BIT | TIMER_CTRL_IE;
+        writel(ctrl, clkevt_base + TIMER_CTRL);
+        switch (mode) {
+        case CLOCK_EVT_MODE_PERIODIC:
+                writel(TIMER_RELOAD, clkevt_base + TIMER_LOAD);
+                ctrl |= TIMER_CTRL_PERIODIC | TIMER_CTRL_ENABLE;
+                break;
+        case CLOCK_EVT_MODE_ONESHOT:
+                /* period set, and timer enabled in 'next_event' hook */
+                ctrl |= TIMER_CTRL_ONESHOT;
+                break;
+        case CLOCK_EVT_MODE_UNUSED:
+        case CLOCK_EVT_MODE_SHUTDOWN:
+        default:
+                break;
+        }
+        writel(ctrl, clkevt_base + TIMER_CTRL);
+}
+static int sp804_set_next_event(unsigned long next,
+        struct clock_event_device *evt)
+{
+        unsigned long ctrl = readl(clkevt_base + TIMER_CTRL);
+        writel(next, clkevt_base + TIMER_LOAD);
+        writel(ctrl | TIMER_CTRL_ENABLE, clkevt_base + TIMER_CTRL);
+        return 0;
+}
+static struct clock_event_device sp804_clockevent = {
+        .name           = "timer0",
+        .shift          = 32,
+        .features       = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
+        .set_mode       = sp804_set_mode,
+        .set_next_event = sp804_set_next_event,
+        .rating         = 300,
+        .cpumask        = cpu_all_mask,
+};
+static struct irqaction sp804_timer_irq = {
+        .name           = "timer",
+        .flags          = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+        .handler        = sp804_timer_interrupt,
+        .dev_id         = &sp804_clockevent,
+};
+void __init sp804_clockevents_init(void __iomem *base, unsigned int timer_irq)
+{
+        struct clock_event_device *evt = &sp804_clockevent;
+        clkevt_base = base;
+        evt->irq = timer_irq;
+        evt->mult = div_sc(TIMER_FREQ_KHZ, NSEC_PER_MSEC, evt->shift);
+        evt->max_delta_ns = clockevent_delta2ns(0xffffffff, evt);
+        evt->min_delta_ns = clockevent_delta2ns(0xf, evt);
+        setup_irq(timer_irq, &sp804_timer_irq);
+        clockevents_register_device(evt);
+}
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 9c6170cd9aac..87ab0568bb0e 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -564,7 +564,7 @@ config I2C_STU300
 config I2C_VERSATILE
        tristate "ARM Versatile/Realview I2C bus support"
-        depends on ARCH_VERSATILE || ARCH_REALVIEW
+        depends on ARCH_VERSATILE || ARCH_REALVIEW || ARCH_VEXPRESS
        select I2C_ALGOBIT
        help
          Say yes if you want to support the I2C serial bus on ARMs Versatile
diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index 84c103a7ee13..ff115d920888 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -55,14 +55,16 @@ static void mmci_set_clkreg(struct mmci_host *host, unsigned int desired)
                        host->cclk = host->mclk / (2 * (clk + 1));
                }
                if (host->hw_designer == AMBA_VENDOR_ST)
-                        clk |= MCI_FCEN; /* Bug fix in ST IP block */
+                        clk |= MCI_ST_FCEN; /* Bug fix in ST IP block */
                clk |= MCI_CLK_ENABLE;
                /* This hasn't proven to be worthwhile */
                /* clk |= MCI_CLK_PWRSAVE; */
        }
        if (host->mmc->ios.bus_width == MMC_BUS_WIDTH_4)
-                clk |= MCI_WIDE_BUS;
+                clk |= MCI_4BIT_BUS;
+        if (host->mmc->ios.bus_width == MMC_BUS_WIDTH_8)
+                clk |= MCI_ST_8BIT_BUS;
        writel(clk, host->base + MMCICLOCK);
 }
@@ -629,7 +631,18 @@ static int __devinit mmci_probe(struct amba_device *dev, struct amba_id *id)
        mmc->ops = &mmci_ops;
        mmc->f_min = (host->mclk + 511) / 512;
-        mmc->f_max = min(host->mclk, fmax);
+        /*
+         * If the platform data supplies a maximum operating
+         * frequency, this takes precedence. Else, we fall back
+         * to using the module parameter, which has a (low)
+         * default value in case it is not specified. Either
+         * value must not exceed the clock rate into the block,
+         * of course.
+         */
+        if (plat->f_max)
+                mmc->f_max = min(host->mclk, plat->f_max);
+        else
+                mmc->f_max = min(host->mclk, fmax);
        dev_dbg(mmc_dev(mmc), "clocking block at %u Hz\n", mmc->f_max);
 #ifdef CONFIG_REGULATOR
diff --git a/drivers/mmc/host/mmci.h b/drivers/mmc/host/mmci.h
index 1ceb9a90f59b..d77062e5e3af 100644
--- a/drivers/mmc/host/mmci.h
+++ b/drivers/mmc/host/mmci.h
@@ -25,9 +25,11 @@
 #define MCI_CLK_ENABLE          (1 << 8)
 #define MCI_CLK_PWRSAVE         (1 << 9)
 #define MCI_CLK_BYPASS          (1 << 10)
-#define MCI_WIDE_BUS            (1 << 11)
+#define MCI_4BIT_BUS            (1 << 11)
+/* 8bit wide buses supported in ST Micro versions */
+#define MCI_ST_8BIT_BUS         (1 << 12)
 /* HW flow control on the ST Micro version */
-#define MCI_FCEN                (1 << 13)
+#define MCI_ST_FCEN             (1 << 13)
 #define MMCIARGUMENT            0x008
 #define MMCICOMMAND             0x00c
diff --git a/drivers/serial/atmel_serial.c b/drivers/serial/atmel_serial.c
index 2c9bf9b68327..eed3c2d8dd1c 100644
--- a/drivers/serial/atmel_serial.c
+++ b/drivers/serial/atmel_serial.c
@@ -38,6 +38,7 @@
 #include <linux/dma-mapping.h>
 #include <linux/atmel_pdc.h>
 #include <linux/atmel_serial.h>
+#include <linux/uaccess.h>
 #include <asm/io.h>
@@ -59,6 +60,9 @@
 #include <linux/serial_core.h>
+static void atmel_start_rx(struct uart_port *port);
+static void atmel_stop_rx(struct uart_port *port);
 #ifdef CONFIG_SERIAL_ATMEL_TTYAT
 /* Use device name ttyAT, major 204 and minor 154-169.  This is necessary if we
@@ -93,6 +97,7 @@
 #define UART_GET_BRGR(port)     __raw_readl((port)->membase + ATMEL_US_BRGR)
 #define UART_PUT_BRGR(port,v)   __raw_writel(v, (port)->membase + ATMEL_US_BRGR)
 #define UART_PUT_RTOR(port,v)   __raw_writel(v, (port)->membase + ATMEL_US_RTOR)
+#define UART_PUT_TTGR(port, v)  __raw_writel(v, (port)->membase + ATMEL_US_TTGR)
 /* PDC registers */
 #define UART_PUT_PTCR(port,v)   __raw_writel(v, (port)->membase + ATMEL_PDC_PTCR)
@@ -147,6 +152,9 @@ struct atmel_uart_port {
        unsigned int            irq_status_prev;
        struct circ_buf         rx_ring;
+        struct serial_rs485     rs485;          /* rs485 settings */
+        unsigned int            tx_done_mask;
 };
 static struct atmel_uart_port atmel_ports[ATMEL_MAX_UART];
@@ -187,6 +195,46 @@ static bool atmel_use_dma_tx(struct uart_port *port)
 }
 #endif
+/* Enable or disable the rs485 support */
+void atmel_config_rs485(struct uart_port *port, struct serial_rs485 *rs485conf)
+{
+        struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
+        unsigned int mode;
+        spin_lock(&port->lock);
+        /* Disable interrupts */
+        UART_PUT_IDR(port, atmel_port->tx_done_mask);
+        mode = UART_GET_MR(port);
+        /* Resetting serial mode to RS232 (0x0) */
+        mode &= ~ATMEL_US_USMODE;
+        atmel_port->rs485 = *rs485conf;
+        if (rs485conf->flags & SER_RS485_ENABLED) {
+                dev_dbg(port->dev, "Setting UART to RS485\n");
+                atmel_port->tx_done_mask = ATMEL_US_TXEMPTY;
+                UART_PUT_TTGR(port, rs485conf->delay_rts_before_send);
+                mode |= ATMEL_US_USMODE_RS485;
+        } else {
+                dev_dbg(port->dev, "Setting UART to RS232\n");
+                if (atmel_use_dma_tx(port))
+                        atmel_port->tx_done_mask = ATMEL_US_ENDTX |
+                                ATMEL_US_TXBUFE;
+                else
+                        atmel_port->tx_done_mask = ATMEL_US_TXRDY;
+        }
+        UART_PUT_MR(port, mode);
+        /* Enable interrupts */
+        UART_PUT_IER(port, atmel_port->tx_done_mask);
+        spin_unlock(&port->lock);
+}
 /*
 * Return TIOCSER_TEMT when transmitter FIFO and Shift register is empty.
 */
@@ -202,6 +250,7 @@ static void atmel_set_mctrl(struct uart_port *port, u_int mctrl)
 {
        unsigned int control = 0;
        unsigned int mode;
+        struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
 #ifdef CONFIG_ARCH_AT91RM9200
        if (cpu_is_at91rm9200()) {
@@ -236,6 +285,17 @@ static void atmel_set_mctrl(struct uart_port *port, u_int mctrl)
                mode |= ATMEL_US_CHMODE_LOC_LOOP;
        else
                mode |= ATMEL_US_CHMODE_NORMAL;
+        /* Resetting serial mode to RS232 (0x0) */
+        mode &= ~ATMEL_US_USMODE;
+        if (atmel_port->rs485.flags & SER_RS485_ENABLED) {
+                dev_dbg(port->dev, "Setting UART to RS485\n");
+                UART_PUT_TTGR(port, atmel_port->rs485.delay_rts_before_send);
+                mode |= ATMEL_US_USMODE_RS485;
+        } else {
+                dev_dbg(port->dev, "Setting UART to RS232\n");
+        }
        UART_PUT_MR(port, mode);
 }
@@ -268,12 +328,17 @@ static u_int atmel_get_mctrl(struct uart_port *port)
 */
 static void atmel_stop_tx(struct uart_port *port)
 {
+        struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
        if (atmel_use_dma_tx(port)) {
                /* disable PDC transmit */
                UART_PUT_PTCR(port, ATMEL_PDC_TXTDIS);
-                UART_PUT_IDR(port, ATMEL_US_ENDTX | ATMEL_US_TXBUFE);
+        }
-        } else
+        /* Disable interrupts */
-                UART_PUT_IDR(port, ATMEL_US_TXRDY);
+        UART_PUT_IDR(port, atmel_port->tx_done_mask);
+        if (atmel_port->rs485.flags & SER_RS485_ENABLED)
+                atmel_start_rx(port);
 }
 /*
@@ -281,17 +346,39 @@ static void atmel_stop_tx(struct uart_port *port)
 */
 static void atmel_start_tx(struct uart_port *port)
 {
+        struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
        if (atmel_use_dma_tx(port)) {
                if (UART_GET_PTSR(port) & ATMEL_PDC_TXTEN)
                        /* The transmitter is already running.  Yes, we
                           really need this.*/
                        return;
-                UART_PUT_IER(port, ATMEL_US_ENDTX | ATMEL_US_TXBUFE);
+                if (atmel_port->rs485.flags & SER_RS485_ENABLED)
+                        atmel_stop_rx(port);
                /* re-enable PDC transmit */
                UART_PUT_PTCR(port, ATMEL_PDC_TXTEN);
-        } else
+        }
-                UART_PUT_IER(port, ATMEL_US_TXRDY);
+        /* Enable interrupts */
+        UART_PUT_IER(port, atmel_port->tx_done_mask);
+}
+/*
+ * start receiving - port is in process of being opened.
+ */
+static void atmel_start_rx(struct uart_port *port)
+{
+        UART_PUT_CR(port, ATMEL_US_RSTSTA);  /* reset status and receiver */
+        if (atmel_use_dma_rx(port)) {
+                /* enable PDC controller */
+                UART_PUT_IER(port, ATMEL_US_ENDRX | ATMEL_US_TIMEOUT |
+                        port->read_status_mask);
+                UART_PUT_PTCR(port, ATMEL_PDC_RXTEN);
+        } else {
+                UART_PUT_IER(port, ATMEL_US_RXRDY);
+        }
 }
 /*
@@ -302,9 +389,11 @@ static void atmel_stop_rx(struct uart_port *port)
        if (atmel_use_dma_rx(port)) {
                /* disable PDC receive */
                UART_PUT_PTCR(port, ATMEL_PDC_RXTDIS);
-                UART_PUT_IDR(port, ATMEL_US_ENDRX | ATMEL_US_TIMEOUT);
+                UART_PUT_IDR(port, ATMEL_US_ENDRX | ATMEL_US_TIMEOUT |
-        } else
+                        port->read_status_mask);
+        } else {
                UART_PUT_IDR(port, ATMEL_US_RXRDY);
+        }
 }
 /*
@@ -428,8 +517,9 @@ static void atmel_rx_chars(struct uart_port *port)
 static void atmel_tx_chars(struct uart_port *port)
 {
        struct circ_buf *xmit = &port->state->xmit;
+        struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
-        if (port->x_char && UART_GET_CSR(port) & ATMEL_US_TXRDY) {
+        if (port->x_char && UART_GET_CSR(port) & atmel_port->tx_done_mask) {
                UART_PUT_CHAR(port, port->x_char);
                port->icount.tx++;
                port->x_char = 0;
@@ -437,7 +527,7 @@ static void atmel_tx_chars(struct uart_port *port)
        if (uart_circ_empty(xmit) || uart_tx_stopped(port))
                return;
-        while (UART_GET_CSR(port) & ATMEL_US_TXRDY) {
+        while (UART_GET_CSR(port) & atmel_port->tx_done_mask) {
                UART_PUT_CHAR(port, xmit->buf[xmit->tail]);
                xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
                port->icount.tx++;
@@ -449,7 +539,8 @@ static void atmel_tx_chars(struct uart_port *port)
                uart_write_wakeup(port);
        if (!uart_circ_empty(xmit))
-                UART_PUT_IER(port, ATMEL_US_TXRDY);
+                /* Enable interrupts */
+                UART_PUT_IER(port, atmel_port->tx_done_mask);
 }
 /*
@@ -501,18 +592,10 @@ atmel_handle_transmit(struct uart_port *port, unsigned int pending)
 {
        struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
-        if (atmel_use_dma_tx(port)) {
+        if (pending & atmel_port->tx_done_mask) {
-                /* PDC transmit */
+                /* Either PDC or interrupt transmission */
-                if (pending & (ATMEL_US_ENDTX | ATMEL_US_TXBUFE)) {
+                UART_PUT_IDR(port, atmel_port->tx_done_mask);
-                        UART_PUT_IDR(port, ATMEL_US_ENDTX | ATMEL_US_TXBUFE);
+                tasklet_schedule(&atmel_port->tasklet);
-                        tasklet_schedule(&atmel_port->tasklet);
-                }
-        } else {
-                /* Interrupt transmit */
-                if (pending & ATMEL_US_TXRDY) {
-                        UART_PUT_IDR(port, ATMEL_US_TXRDY);
-                        tasklet_schedule(&atmel_port->tasklet);
-                }
        }
 }
@@ -590,9 +673,15 @@ static void atmel_tx_dma(struct uart_port *port)
                UART_PUT_TPR(port, pdc->dma_addr + xmit->tail);
                UART_PUT_TCR(port, count);
-                /* re-enable PDC transmit and interrupts */
+                /* re-enable PDC transmit */
                UART_PUT_PTCR(port, ATMEL_PDC_TXTEN);
-                UART_PUT_IER(port, ATMEL_US_ENDTX | ATMEL_US_TXBUFE);
+                /* Enable interrupts */
+                UART_PUT_IER(port, atmel_port->tx_done_mask);
+        } else {
+                if (atmel_port->rs485.flags & SER_RS485_ENABLED) {
+                        /* DMA done, stop TX, start RX for RS485 */
+                        atmel_start_rx(port);
+                }
        }
        if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
@@ -1017,6 +1106,7 @@ static void atmel_set_termios(struct uart_port *port, struct ktermios *termios,
 {
        unsigned long flags;
        unsigned int mode, imr, quot, baud;
+        struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
        /* Get current mode register */
        mode = UART_GET_MR(port) & ~(ATMEL_US_USCLKS | ATMEL_US_CHRL
@@ -1115,6 +1205,17 @@ static void atmel_set_termios(struct uart_port *port, struct ktermios *termios,
        /* disable receiver and transmitter */
        UART_PUT_CR(port, ATMEL_US_TXDIS | ATMEL_US_RXDIS);
+        /* Resetting serial mode to RS232 (0x0) */
+        mode &= ~ATMEL_US_USMODE;
+        if (atmel_port->rs485.flags & SER_RS485_ENABLED) {
+                dev_dbg(port->dev, "Setting UART to RS485\n");
+                UART_PUT_TTGR(port, atmel_port->rs485.delay_rts_before_send);
+                mode |= ATMEL_US_USMODE_RS485;
+        } else {
+                dev_dbg(port->dev, "Setting UART to RS232\n");
+        }
        /* set the parity, stop bits and data size */
        UART_PUT_MR(port, mode);
@@ -1231,6 +1332,35 @@ static void atmel_poll_put_char(struct uart_port *port, unsigned char ch)
 }
 #endif
+static int
+atmel_ioctl(struct uart_port *port, unsigned int cmd, unsigned long arg)
+{
+        struct serial_rs485 rs485conf;
+        switch (cmd) {
+        case TIOCSRS485:
+                if (copy_from_user(&rs485conf, (struct serial_rs485 *) arg,
+                                        sizeof(rs485conf)))
+                        return -EFAULT;
+                atmel_config_rs485(port, &rs485conf);
+                break;
+        case TIOCGRS485:
+                if (copy_to_user((struct serial_rs485 *) arg,
+                                        &(to_atmel_uart_port(port)->rs485),
+                                        sizeof(rs485conf)))
+                        return -EFAULT;
+                break;
+        default:
+                return -ENOIOCTLCMD;
+        }
+        return 0;
+}
 static struct uart_ops atmel_pops = {
        .tx_empty       = atmel_tx_empty,
        .set_mctrl      = atmel_set_mctrl,
@@ -1250,6 +1380,7 @@ static struct uart_ops atmel_pops = {
        .config_port    = atmel_config_port,
        .verify_port    = atmel_verify_port,
        .pm             = atmel_serial_pm,
+        .ioctl          = atmel_ioctl,
 #ifdef CONFIG_CONSOLE_POLL
        .poll_get_char  = atmel_poll_get_char,
        .poll_put_char  = atmel_poll_put_char,
@@ -1265,13 +1396,12 @@ static void __devinit atmel_init_port(struct atmel_uart_port *atmel_port,
        struct uart_port *port = &atmel_port->uart;
        struct atmel_uart_data *data = pdev->dev.platform_data;
-        port->iotype    = UPIO_MEM;
+        port->iotype            = UPIO_MEM;
-        port->flags     = UPF_BOOT_AUTOCONF;
+        port->flags             = UPF_BOOT_AUTOCONF;
-        port->ops       = &atmel_pops;
+        port->ops               = &atmel_pops;
-        port->fifosize  = 1;
+        port->fifosize          = 1;
-        port->line      = pdev->id;
+        port->line              = pdev->id;
-        port->dev       = &pdev->dev;
+        port->dev               = &pdev->dev;
        port->mapbase   = pdev->resource[0].start;
        port->irq       = pdev->resource[1].start;
@@ -1299,8 +1429,16 @@ static void __devinit atmel_init_port(struct atmel_uart_port *atmel_port,
        atmel_port->use_dma_rx = data->use_dma_rx;
        atmel_port->use_dma_tx = data->use_dma_tx;
-        if (atmel_use_dma_tx(port))
+        atmel_port->rs485       = data->rs485;
+        /* Use TXEMPTY for interrupt when rs485 else TXRDY or ENDTX|TXBUFE */
+        if (atmel_port->rs485.flags & SER_RS485_ENABLED)
+                atmel_port->tx_done_mask = ATMEL_US_TXEMPTY;
+        else if (atmel_use_dma_tx(port)) {
                port->fifosize = PDC_BUFFER_SIZE;
+                atmel_port->tx_done_mask = ATMEL_US_ENDTX | ATMEL_US_TXBUFE;
+        } else {
+                atmel_port->tx_done_mask = ATMEL_US_TXRDY;
+        }
 }
 /*
@@ -1334,6 +1472,7 @@ static void atmel_console_putchar(struct uart_port *port, int ch)
 static void atmel_console_write(struct console *co, const char *s, u_int count)
 {
        struct uart_port *port = &atmel_ports[co->index].uart;
+        struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
        unsigned int status, imr;
        unsigned int pdc_tx;
@@ -1341,7 +1480,7 @@ static void atmel_console_write(struct console *co, const char *s, u_int count)
         * First, save IMR and then disable interrupts
         */
        imr = UART_GET_IMR(port);
-        UART_PUT_IDR(port, ATMEL_US_RXRDY | ATMEL_US_TXRDY);
+        UART_PUT_IDR(port, ATMEL_US_RXRDY | atmel_port->tx_done_mask);
        /* Store PDC transmit status and disable it */
        pdc_tx = UART_GET_PTSR(port) & ATMEL_PDC_TXTEN;
diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c
index 12ac9cd32a07..b3bd22ef82ba 100644
--- a/drivers/usb/gadget/at91_udc.c
+++ b/drivers/usb/gadget/at91_udc.c
@@ -366,6 +366,13 @@ rescan:
        if (is_done)
                done(ep, req, 0);
        else if (ep->is_pingpong) {
+                /*
+                 * One dummy read to delay the code because of a HW glitch:
+                 * CSR returns bad RXCOUNT when read too soon after updating
+                 * RX_DATA_BK flags.
+                 */
+                csr = __raw_readl(creg);
                bufferspace -= count;
                buf += count;
                goto rescan;
diff --git a/include/linux/amba/mmci.h b/include/linux/amba/mmci.h
index 6b4241748dda..7e466fe72025 100644
--- a/include/linux/amba/mmci.h
+++ b/include/linux/amba/mmci.h
@@ -6,8 +6,29 @@
 #include <linux/mmc/host.h>
+/**
+ * struct mmci_platform_data - platform configuration for the MMCI
+ * (also known as PL180) block.
+ * @f_max: the maximum operational frequency for this host in this
+ * platform configuration. When this is specified it takes precedence
+ * over the module parameter for the same frequency.
+ * @ocr_mask: available voltages on the 4 pins from the block, this
+ * is ignored if a regulator is used, see the MMC_VDD_* masks in
+ * mmc/host.h
+ * @translate_vdd: a callback function to translate a MMC_VDD_*
+ * mask into a value to be binary or:ed and written into the
+ * MMCIPWR register of the block
+ * @status: if no GPIO read function was given to the block in
+ * gpio_wp (below) this function will be called to determine
+ * whether a card is present in the MMC slot or not
+ * @gpio_wp: read this GPIO pin to see if the card is write protected
+ * @gpio_cd: read this GPIO pin to detect card insertion
+ * @capabilities: the capabilities of the block as implemented in
+ * this platform, signify anything MMC_CAP_* from mmc/host.h
+ */
 struct mmci_platform_data {
-        unsigned int ocr_mask;                  /* available voltages */
+        unsigned int f_max;
+        unsigned int ocr_mask;
        u32 (*translate_vdd)(struct device *, unsigned int);
        unsigned int (*status)(struct device *);
        int     gpio_wp;