7 files changed, 50 insertions, 50 deletions

diff --git a/drivers/ide/pci/alim15x3.c b/drivers/ide/pci/alim15x3.c
index 9dd7cb4d07d4..0b65a2c9308f 100644
--- a/drivers/ide/pci/alim15x3.c
+++ b/drivers/ide/pci/alim15x3.c
@@ -775,7 +775,7 @@ static int __devinit alim15x3_init_one(struct pci_dev *dev, const struct pci_dev
         };
 
         struct ide_port_info d = ali15x3_chipset;
-        u8 rev = dev->revision;
+        u8 rev = dev->revision, idx = id->driver_data;
 
         if (pci_dev_present(ati_rs100))
                 printk(KERN_WARNING "alim15x3: ATI Radeon IGP Northbridge is not yet fully tested.\n");
@@ -798,6 +798,9 @@ static int __devinit alim15x3_init_one(struct pci_dev *dev, const struct pci_dev
                         d.udma_mask = ATA_UDMA6;
         }
 
+        if (idx == 0)
+                d.host_flags |= IDE_HFLAG_CLEAR_SIMPLEX;
+
 #if defined(CONFIG_SPARC64)
         d.init_hwif = init_hwif_common_ali15x3;
 #endif /* CONFIG_SPARC64 */
@@ -807,7 +810,7 @@ static int __devinit alim15x3_init_one(struct pci_dev *dev, const struct pci_dev
 
 static const struct pci_device_id alim15x3_pci_tbl[] = {
         { PCI_VDEVICE(AL, PCI_DEVICE_ID_AL_M5229), 0 },
-        { PCI_VDEVICE(AL, PCI_DEVICE_ID_AL_M5228), 0 },
+        { PCI_VDEVICE(AL, PCI_DEVICE_ID_AL_M5228), 1 },
         { 0, },
 };
 MODULE_DEVICE_TABLE(pci, alim15x3_pci_tbl);
diff --git a/drivers/ide/pci/amd74xx.c b/drivers/ide/pci/amd74xx.c
index 13c9f67969cd..2e8cbcaf3ef5 100644
--- a/drivers/ide/pci/amd74xx.c
+++ b/drivers/ide/pci/amd74xx.c
@@ -295,6 +295,7 @@ static int __devinit amd74xx_probe(struct pci_dev *dev, const struct pci_device_
         if (idx == 1) {
                 if (dev->revision <= 7)
                         d.swdma_mask = 0;
+                d.host_flags |= IDE_HFLAG_CLEAR_SIMPLEX;
         } else if (idx == 4) {
                 if (dev->subsystem_vendor == PCI_VENDOR_ID_AMD &&
                     dev->subsystem_device == PCI_DEVICE_ID_AMD_SERENADE)
diff --git a/drivers/ide/pci/cmd64x.c b/drivers/ide/pci/cmd64x.c
index cd4eb9def151..effd79a715b0 100644
--- a/drivers/ide/pci/cmd64x.c
+++ b/drivers/ide/pci/cmd64x.c
@@ -443,7 +443,9 @@ static const struct ide_port_info cmd64x_chipsets[] __devinitdata = {
                 .init_chipset   = init_chipset_cmd64x,
                 .init_hwif      = init_hwif_cmd64x,
                 .enablebits     = {{0x00,0x00,0x00}, {0x51,0x08,0x08}},
-                .host_flags     = IDE_HFLAG_ABUSE_PREFETCH | IDE_HFLAG_BOOTABLE,
+                .host_flags     = IDE_HFLAG_CLEAR_SIMPLEX |
+                                  IDE_HFLAG_ABUSE_PREFETCH |
+                                  IDE_HFLAG_BOOTABLE,
                 .pio_mask       = ATA_PIO5,
                 .mwdma_mask     = ATA_MWDMA2,
                 .udma_mask      = 0x00, /* no udma */
diff --git a/drivers/ide/pci/generic.c b/drivers/ide/pci/generic.c
index 06885697ed7b..22ef34863d56 100644
--- a/drivers/ide/pci/generic.c
+++ b/drivers/ide/pci/generic.c
@@ -104,7 +104,8 @@ static const struct ide_port_info generic_chipsets[] __devinitdata = {
 
         {       /* 14 */
                 .name           = "Revolution",
-                .host_flags     = IDE_HFLAG_TRUST_BIOS_FOR_DMA |
+                .host_flags     = IDE_HFLAG_CLEAR_SIMPLEX |
+                                  IDE_HFLAG_TRUST_BIOS_FOR_DMA |
                                   IDE_HFLAG_OFF_BOARD,
                 .swdma_mask     = ATA_SWDMA2,
                 .mwdma_mask     = ATA_MWDMA2,
diff --git a/drivers/ide/pci/serverworks.c b/drivers/ide/pci/serverworks.c
index 877c09bf4829..bf01c387739e 100644
--- a/drivers/ide/pci/serverworks.c
+++ b/drivers/ide/pci/serverworks.c
@@ -418,7 +418,9 @@ static int __devinit svwks_init_one(struct pci_dev *dev, const struct pci_device
 
         d = serverworks_chipsets[idx];
 
-        if (idx == 2 || idx == 3) {
+        if (idx == 1)
+                d.host_flags |= IDE_HFLAG_CLEAR_SIMPLEX;
+        else if (idx == 2 || idx == 3) {
                 if ((PCI_FUNC(dev->devfn) & 1) == 0) {
                         if (pci_resource_start(dev, 0) != 0x01f1)
                                 d.host_flags &= ~IDE_HFLAG_BOOTABLE;
diff --git a/drivers/ide/setup-pci.c b/drivers/ide/setup-pci.c
index c473f45abd33..0a4b3a6857e1 100644
--- a/drivers/ide/setup-pci.c
+++ b/drivers/ide/setup-pci.c
@@ -140,6 +140,16 @@ static int ide_setup_pci_baseregs (struct pci_dev *dev, const char *name)
 }
 
 #ifdef CONFIG_BLK_DEV_IDEDMA_PCI
+static void ide_pci_clear_simplex(unsigned long dma_base, const char *name)
+{
+        u8 dma_stat = inb(dma_base + 2);
+
+        outb(dma_stat & 0x60, dma_base + 2);
+        dma_stat = inb(dma_base + 2);
+        if (dma_stat & 0x80)
+                printk(KERN_INFO "%s: simplex device: DMA forced\n", name);
+}
+
 /**
  *      ide_get_or_set_dma_base         -       setup BMIBA
  *      @d: IDE port info
@@ -154,6 +164,7 @@ static unsigned long ide_get_or_set_dma_base(const struct ide_port_info *d, ide_
 {
         unsigned long   dma_base = 0;
         struct pci_dev  *dev = hwif->pci_dev;
+        u8 dma_stat = 0;
 
         if (hwif->mmio)
                 return hwif->dma_base;
@@ -174,52 +185,30 @@ static unsigned long ide_get_or_set_dma_base(const struct ide_port_info *d, ide_
         if (hwif->channel)
                 dma_base += 8;
 
-        if ((d->host_flags & IDE_HFLAG_CS5520) == 0) {
-                u8 simplex_stat = 0;
-
-                switch(dev->device) {
-                        case PCI_DEVICE_ID_AL_M5219:
-                        case PCI_DEVICE_ID_AL_M5229:
-                        case PCI_DEVICE_ID_AMD_VIPER_7409:
-                        case PCI_DEVICE_ID_CMD_643:
-                        case PCI_DEVICE_ID_SERVERWORKS_CSB5IDE:
-                        case PCI_DEVICE_ID_REVOLUTION:
-                                simplex_stat = inb(dma_base + 2);
-                                outb(simplex_stat & 0x60, dma_base + 2);
-                                simplex_stat = inb(dma_base + 2);
-                                if (simplex_stat & 0x80) {
-                                        printk(KERN_INFO "%s: simplex device: "
-                                                         "DMA forced\n",
-                                                         d->name);
-                                }
-                                break;
-                        default:
-                                /*
-                                 * If the device claims "simplex" DMA,
-                                 * this means only one of the two interfaces
-                                 * can be trusted with DMA at any point in time.
-                                 * So we should enable DMA only on one of the
-                                 * two interfaces.
-                                 */
-                                simplex_stat = hwif->INB(dma_base + 2);
-                                if (simplex_stat & 0x80) {
-                                        /* simplex device? */
-/*
- *      At this point we haven't probed the drives so we can't make the
- *      appropriate decision. Really we should defer this problem
- *      until we tune the drive then try to grab DMA ownership if we want
- *      to be the DMA end. This has to be become dynamic to handle hot
- *      plug.
- */
-                                        if (hwif->mate && hwif->mate->dma_base) {
-                                                printk(KERN_INFO "%s: simplex device: "
-                                                                 "DMA disabled\n",
-                                                                 d->name);
-                                                dma_base = 0;
-                                        }
-                                }
-                }
+        if (d->host_flags & IDE_HFLAG_CS5520)
+                goto out;
+
+        if (d->host_flags & IDE_HFLAG_CLEAR_SIMPLEX) {
+                ide_pci_clear_simplex(dma_base, d->name);
+                goto out;
+        }
+
+        /*
+         * If the device claims "simplex" DMA, this means that only one of
+         * the two interfaces can be trusted with DMA at any point in time
+         * (so we should enable DMA only on one of the two interfaces).
+         *
+         * FIXME: At this point we haven't probed the drives so we can't make
+         * the appropriate decision.  Really we should defer this problem until
+         * we tune the drive then try to grab DMA ownership if we want to be
+         * the DMA end.  This has to be become dynamic to handle hot-plug.
+         */
+        dma_stat = hwif->INB(dma_base + 2);
+        if ((dma_stat & 0x80) && hwif->mate && hwif->mate->dma_base) {
+                printk(KERN_INFO "%s: simplex device: DMA disabled\n", d->name);
+                dma_base = 0;
         }
+out:
         return dma_base;
 }
 #endif /* CONFIG_BLK_DEV_IDEDMA_PCI */
diff --git a/include/linux/ide.h b/include/linux/ide.h
index f1a10c8380bd..1b31597e7435 100644
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -1093,6 +1093,8 @@ enum {
         IDE_HFLAG_ABUSE_SET_DMA_MODE    = (1 << 26),
         /* host is CY82C693 */
         IDE_HFLAG_CY82C693              = (1 << 27),
+        /* force host out of "simplex" mode */
+        IDE_HFLAG_CLEAR_SIMPLEX         = (1 << 28),
 };
 
 #ifdef CONFIG_BLK_DEV_OFFBOARD