aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--arch/blackfin/mach-bf533/boards/cm_bf533.c81
-rw-r--r--arch/blackfin/mach-bf533/boards/ezkit.c91
-rw-r--r--arch/blackfin/mach-bf533/boards/stamp.c119
-rw-r--r--arch/blackfin/mach-bf537/boards/cm_bf537.c87
-rw-r--r--arch/blackfin/mach-bf537/boards/generic_board.c397
-rw-r--r--arch/blackfin/mach-bf537/boards/pnav10.c53
-rw-r--r--arch/blackfin/mach-bf537/boards/stamp.c142
-rw-r--r--arch/blackfin/mach-bf548/boards/ezkit.c477
-rw-r--r--arch/blackfin/mach-bf561/boards/cm_bf561.c84
-rw-r--r--arch/blackfin/mach-bf561/boards/ezkit.c82
10 files changed, 1448 insertions, 165 deletions
diff --git a/arch/blackfin/mach-bf533/boards/cm_bf533.c b/arch/blackfin/mach-bf533/boards/cm_bf533.c
index 4545f363e641..a57b52d207cd 100644
--- a/arch/blackfin/mach-bf533/boards/cm_bf533.c
+++ b/arch/blackfin/mach-bf533/boards/cm_bf533.c
@@ -34,7 +34,9 @@
34#include <linux/spi/spi.h> 34#include <linux/spi/spi.h>
35#include <linux/spi/flash.h> 35#include <linux/spi/flash.h>
36#include <linux/usb_isp1362.h> 36#include <linux/usb_isp1362.h>
37#include <linux/pata_platform.h>
37#include <linux/irq.h> 38#include <linux/irq.h>
39#include <asm/dma.h>
38#include <asm/bfin5xx_spi.h> 40#include <asm/bfin5xx_spi.h>
39 41
40/* 42/*
@@ -93,7 +95,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
93 /* the modalias must be the same as spi device driver name */ 95 /* the modalias must be the same as spi device driver name */
94 .modalias = "m25p80", /* Name of spi_driver for this device */ 96 .modalias = "m25p80", /* Name of spi_driver for this device */
95 .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ 97 .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
96 .bus_num = 1, /* Framework bus number */ 98 .bus_num = 0, /* Framework bus number */
97 .chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/ 99 .chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/
98 .platform_data = &bfin_spi_flash_data, 100 .platform_data = &bfin_spi_flash_data,
99 .controller_data = &spi_flash_chip_info, 101 .controller_data = &spi_flash_chip_info,
@@ -101,7 +103,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
101 }, { 103 }, {
102 .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */ 104 .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
103 .max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */ 105 .max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */
104 .bus_num = 1, /* Framework bus number */ 106 .bus_num = 0, /* Framework bus number */
105 .chip_select = 2, /* Framework chip select. */ 107 .chip_select = 2, /* Framework chip select. */
106 .platform_data = NULL, /* No spi_driver specific config */ 108 .platform_data = NULL, /* No spi_driver specific config */
107 .controller_data = &spi_adc_chip_info, 109 .controller_data = &spi_adc_chip_info,
@@ -110,24 +112,40 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
110 { 112 {
111 .modalias = "ad1836-spi", 113 .modalias = "ad1836-spi",
112 .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ 114 .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
113 .bus_num = 1, 115 .bus_num = 0,
114 .chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT, 116 .chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT,
115 .controller_data = &ad1836_spi_chip_info, 117 .controller_data = &ad1836_spi_chip_info,
116 }, 118 },
117#endif 119#endif
118}; 120};
119 121
122/* SPI (0) */
123static struct resource bfin_spi0_resource[] = {
124 [0] = {
125 .start = SPI0_REGBASE,
126 .end = SPI0_REGBASE + 0xFF,
127 .flags = IORESOURCE_MEM,
128 },
129 [1] = {
130 .start = CH_SPI,
131 .end = CH_SPI,
132 .flags = IORESOURCE_IRQ,
133 }
134};
135
120/* SPI controller data */ 136/* SPI controller data */
121static struct bfin5xx_spi_master spi_bfin_master_info = { 137static struct bfin5xx_spi_master bfin_spi0_info = {
122 .num_chipselect = 8, 138 .num_chipselect = 8,
123 .enable_dma = 1, /* master has the ability to do dma transfer */ 139 .enable_dma = 1, /* master has the ability to do dma transfer */
124}; 140};
125 141
126static struct platform_device spi_bfin_master_device = { 142static struct platform_device bfin_spi0_device = {
127 .name = "bfin-spi-master", 143 .name = "bfin-spi",
128 .id = 1, /* Bus number */ 144 .id = 0, /* Bus number */
145 .num_resources = ARRAY_SIZE(bfin_spi0_resource),
146 .resource = bfin_spi0_resource,
129 .dev = { 147 .dev = {
130 .platform_data = &spi_bfin_master_info, /* Passed to driver */ 148 .platform_data = &bfin_spi0_info, /* Passed to driver */
131 }, 149 },
132}; 150};
133#endif /* spi master and devices */ 151#endif /* spi master and devices */
@@ -227,6 +245,43 @@ static struct platform_device isp1362_hcd_device = {
227}; 245};
228#endif 246#endif
229 247
248#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
249#define PATA_INT 38
250
251static struct pata_platform_info bfin_pata_platform_data = {
252 .ioport_shift = 2,
253 .irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED,
254};
255
256static struct resource bfin_pata_resources[] = {
257 {
258 .start = 0x2030C000,
259 .end = 0x2030C01F,
260 .flags = IORESOURCE_MEM,
261 },
262 {
263 .start = 0x2030D018,
264 .end = 0x2030D01B,
265 .flags = IORESOURCE_MEM,
266 },
267 {
268 .start = PATA_INT,
269 .end = PATA_INT,
270 .flags = IORESOURCE_IRQ,
271 },
272};
273
274static struct platform_device bfin_pata_device = {
275 .name = "pata_platform",
276 .id = -1,
277 .num_resources = ARRAY_SIZE(bfin_pata_resources),
278 .resource = bfin_pata_resources,
279 .dev = {
280 .platform_data = &bfin_pata_platform_data,
281 }
282};
283#endif
284
230static struct platform_device *cm_bf533_devices[] __initdata = { 285static struct platform_device *cm_bf533_devices[] __initdata = {
231#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) 286#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
232 &bfin_uart_device, 287 &bfin_uart_device,
@@ -250,7 +305,11 @@ static struct platform_device *cm_bf533_devices[] __initdata = {
250#endif 305#endif
251 306
252#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) 307#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
253 &spi_bfin_master_device, 308 &bfin_spi0_device,
309#endif
310
311#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
312 &bfin_pata_device,
254#endif 313#endif
255}; 314};
256 315
@@ -261,6 +320,10 @@ static int __init cm_bf533_init(void)
261#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) 320#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
262 spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); 321 spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
263#endif 322#endif
323
324#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
325 irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;
326#endif
264 return 0; 327 return 0;
265} 328}
266 329
diff --git a/arch/blackfin/mach-bf533/boards/ezkit.c b/arch/blackfin/mach-bf533/boards/ezkit.c
index 0000b8f1239c..5c1e35d3c012 100644
--- a/arch/blackfin/mach-bf533/boards/ezkit.c
+++ b/arch/blackfin/mach-bf533/boards/ezkit.c
@@ -35,7 +35,9 @@
35#include <linux/spi/spi.h> 35#include <linux/spi/spi.h>
36#include <linux/spi/flash.h> 36#include <linux/spi/flash.h>
37#include <linux/usb_isp1362.h> 37#include <linux/usb_isp1362.h>
38#include <linux/pata_platform.h>
38#include <linux/irq.h> 39#include <linux/irq.h>
40#include <asm/dma.h>
39#include <asm/bfin5xx_spi.h> 41#include <asm/bfin5xx_spi.h>
40 42
41/* 43/*
@@ -50,6 +52,12 @@ static struct platform_device rtc_device = {
50}; 52};
51#endif 53#endif
52 54
55#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
56static struct platform_device bfin_fb_adv7393_device = {
57 .name = "bfin-adv7393",
58};
59#endif
60
53/* 61/*
54 * USB-LAN EzExtender board 62 * USB-LAN EzExtender board
55 * Driver needs to know address, irq and flag pin. 63 * Driver needs to know address, irq and flag pin.
@@ -131,7 +139,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
131 /* the modalias must be the same as spi device driver name */ 139 /* the modalias must be the same as spi device driver name */
132 .modalias = "m25p80", /* Name of spi_driver for this device */ 140 .modalias = "m25p80", /* Name of spi_driver for this device */
133 .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ 141 .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
134 .bus_num = 1, /* Framework bus number */ 142 .bus_num = 0, /* Framework bus number */
135 .chip_select = 2, /* Framework chip select. On STAMP537 it is SPISSEL2*/ 143 .chip_select = 2, /* Framework chip select. On STAMP537 it is SPISSEL2*/
136 .platform_data = &bfin_spi_flash_data, 144 .platform_data = &bfin_spi_flash_data,
137 .controller_data = &spi_flash_chip_info, 145 .controller_data = &spi_flash_chip_info,
@@ -143,7 +151,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
143 { 151 {
144 .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */ 152 .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
145 .max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */ 153 .max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */
146 .bus_num = 1, /* Framework bus number */ 154 .bus_num = 0, /* Framework bus number */
147 .chip_select = 1, /* Framework chip select. */ 155 .chip_select = 1, /* Framework chip select. */
148 .platform_data = NULL, /* No spi_driver specific config */ 156 .platform_data = NULL, /* No spi_driver specific config */
149 .controller_data = &spi_adc_chip_info, 157 .controller_data = &spi_adc_chip_info,
@@ -154,24 +162,40 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
154 { 162 {
155 .modalias = "ad1836-spi", 163 .modalias = "ad1836-spi",
156 .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ 164 .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
157 .bus_num = 1, 165 .bus_num = 0,
158 .chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT, 166 .chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT,
159 .controller_data = &ad1836_spi_chip_info, 167 .controller_data = &ad1836_spi_chip_info,
160 }, 168 },
161#endif 169#endif
162}; 170};
163 171
172/* SPI (0) */
173static struct resource bfin_spi0_resource[] = {
174 [0] = {
175 .start = SPI0_REGBASE,
176 .end = SPI0_REGBASE + 0xFF,
177 .flags = IORESOURCE_MEM,
178 },
179 [1] = {
180 .start = CH_SPI,
181 .end = CH_SPI,
182 .flags = IORESOURCE_IRQ,
183 }
184};
185
164/* SPI controller data */ 186/* SPI controller data */
165static struct bfin5xx_spi_master spi_bfin_master_info = { 187static struct bfin5xx_spi_master bfin_spi0_info = {
166 .num_chipselect = 8, 188 .num_chipselect = 8,
167 .enable_dma = 1, /* master has the ability to do dma transfer */ 189 .enable_dma = 1, /* master has the ability to do dma transfer */
168}; 190};
169 191
170static struct platform_device spi_bfin_master_device = { 192static struct platform_device bfin_spi0_device = {
171 .name = "bfin-spi-master", 193 .name = "bfin-spi",
172 .id = 1, /* Bus number */ 194 .id = 0, /* Bus number */
195 .num_resources = ARRAY_SIZE(bfin_spi0_resource),
196 .resource = bfin_spi0_resource,
173 .dev = { 197 .dev = {
174 .platform_data = &spi_bfin_master_info, /* Passed to driver */ 198 .platform_data = &bfin_spi0_info, /* Passed to driver */
175 }, 199 },
176}; 200};
177#endif /* spi master and devices */ 201#endif /* spi master and devices */
@@ -193,13 +217,54 @@ static struct platform_device bfin_uart_device = {
193}; 217};
194#endif 218#endif
195 219
220#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
221#define PATA_INT 55
222
223static struct pata_platform_info bfin_pata_platform_data = {
224 .ioport_shift = 1,
225 .irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED,
226};
227
228static struct resource bfin_pata_resources[] = {
229 {
230 .start = 0x20314020,
231 .end = 0x2031403F,
232 .flags = IORESOURCE_MEM,
233 },
234 {
235 .start = 0x2031401C,
236 .end = 0x2031401F,
237 .flags = IORESOURCE_MEM,
238 },
239 {
240 .start = PATA_INT,
241 .end = PATA_INT,
242 .flags = IORESOURCE_IRQ,
243 },
244};
245
246static struct platform_device bfin_pata_device = {
247 .name = "pata_platform",
248 .id = -1,
249 .num_resources = ARRAY_SIZE(bfin_pata_resources),
250 .resource = bfin_pata_resources,
251 .dev = {
252 .platform_data = &bfin_pata_platform_data,
253 }
254};
255#endif
256
196static struct platform_device *ezkit_devices[] __initdata = { 257static struct platform_device *ezkit_devices[] __initdata = {
197#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) 258#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
198 &smc91x_device, 259 &smc91x_device,
199#endif 260#endif
200 261
201#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) 262#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
202 &spi_bfin_master_device, 263 &bfin_spi0_device,
264#endif
265
266#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
267 &bfin_fb_adv7393_device,
203#endif 268#endif
204 269
205#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) 270#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
@@ -209,6 +274,10 @@ static struct platform_device *ezkit_devices[] __initdata = {
209#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) 274#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
210 &bfin_uart_device, 275 &bfin_uart_device,
211#endif 276#endif
277
278#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
279 &bfin_pata_device,
280#endif
212}; 281};
213 282
214static int __init ezkit_init(void) 283static int __init ezkit_init(void)
@@ -218,6 +287,10 @@ static int __init ezkit_init(void)
218#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) 287#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
219 spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); 288 spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
220#endif 289#endif
290
291#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
292 irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;
293#endif
221 return 0; 294 return 0;
222} 295}
223 296
diff --git a/arch/blackfin/mach-bf533/boards/stamp.c b/arch/blackfin/mach-bf533/boards/stamp.c
index a9143c4cbdcd..8975e06ea158 100644
--- a/arch/blackfin/mach-bf533/boards/stamp.c
+++ b/arch/blackfin/mach-bf533/boards/stamp.c
@@ -37,8 +37,11 @@
37#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) 37#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
38#include <linux/usb_isp1362.h> 38#include <linux/usb_isp1362.h>
39#endif 39#endif
40#include <linux/pata_platform.h>
40#include <linux/irq.h> 41#include <linux/irq.h>
42#include <asm/dma.h>
41#include <asm/bfin5xx_spi.h> 43#include <asm/bfin5xx_spi.h>
44#include <asm/reboot.h>
42 45
43/* 46/*
44 * Name the Board for the /proc/cpuinfo 47 * Name the Board for the /proc/cpuinfo
@@ -77,6 +80,12 @@ static struct platform_device smc91x_device = {
77}; 80};
78#endif 81#endif
79 82
83#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
84static struct platform_device bfin_fb_adv7393_device = {
85 .name = "bfin-adv7393",
86};
87#endif
88
80#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) 89#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
81static struct resource net2272_bfin_resources[] = { 90static struct resource net2272_bfin_resources[] = {
82 { 91 {
@@ -177,7 +186,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
177 /* the modalias must be the same as spi device driver name */ 186 /* the modalias must be the same as spi device driver name */
178 .modalias = "m25p80", /* Name of spi_driver for this device */ 187 .modalias = "m25p80", /* Name of spi_driver for this device */
179 .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ 188 .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
180 .bus_num = 1, /* Framework bus number */ 189 .bus_num = 0, /* Framework bus number */
181 .chip_select = 2, /* Framework chip select. On STAMP537 it is SPISSEL2*/ 190 .chip_select = 2, /* Framework chip select. On STAMP537 it is SPISSEL2*/
182 .platform_data = &bfin_spi_flash_data, 191 .platform_data = &bfin_spi_flash_data,
183 .controller_data = &spi_flash_chip_info, 192 .controller_data = &spi_flash_chip_info,
@@ -189,7 +198,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
189 { 198 {
190 .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */ 199 .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
191 .max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */ 200 .max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */
192 .bus_num = 1, /* Framework bus number */ 201 .bus_num = 0, /* Framework bus number */
193 .chip_select = 1, /* Framework chip select. */ 202 .chip_select = 1, /* Framework chip select. */
194 .platform_data = NULL, /* No spi_driver specific config */ 203 .platform_data = NULL, /* No spi_driver specific config */
195 .controller_data = &spi_adc_chip_info, 204 .controller_data = &spi_adc_chip_info,
@@ -200,7 +209,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
200 { 209 {
201 .modalias = "ad1836-spi", 210 .modalias = "ad1836-spi",
202 .max_speed_hz = 31250000, /* max spi clock (SCK) speed in HZ */ 211 .max_speed_hz = 31250000, /* max spi clock (SCK) speed in HZ */
203 .bus_num = 1, 212 .bus_num = 0,
204 .chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT, 213 .chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT,
205 .controller_data = &ad1836_spi_chip_info, 214 .controller_data = &ad1836_spi_chip_info,
206 }, 215 },
@@ -210,7 +219,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
210 { 219 {
211 .modalias = "spi_mmc_dummy", 220 .modalias = "spi_mmc_dummy",
212 .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ 221 .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
213 .bus_num = 1, 222 .bus_num = 0,
214 .chip_select = 0, 223 .chip_select = 0,
215 .platform_data = NULL, 224 .platform_data = NULL,
216 .controller_data = &spi_mmc_chip_info, 225 .controller_data = &spi_mmc_chip_info,
@@ -219,7 +228,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
219 { 228 {
220 .modalias = "spi_mmc", 229 .modalias = "spi_mmc",
221 .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ 230 .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
222 .bus_num = 1, 231 .bus_num = 0,
223 .chip_select = CONFIG_SPI_MMC_CS_CHAN, 232 .chip_select = CONFIG_SPI_MMC_CS_CHAN,
224 .platform_data = NULL, 233 .platform_data = NULL,
225 .controller_data = &spi_mmc_chip_info, 234 .controller_data = &spi_mmc_chip_info,
@@ -231,16 +240,16 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
231 { 240 {
232 .modalias = "fxs-spi", 241 .modalias = "fxs-spi",
233 .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */ 242 .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */
234 .bus_num = 1, 243 .bus_num = 0,
235 .chip_select = 3, 244 .chip_select = 8 - CONFIG_J11_JUMPER,
236 .controller_data = &spi_si3xxx_chip_info, 245 .controller_data = &spi_si3xxx_chip_info,
237 .mode = SPI_MODE_3, 246 .mode = SPI_MODE_3,
238 }, 247 },
239 { 248 {
240 .modalias = "fxo-spi", 249 .modalias = "fxo-spi",
241 .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */ 250 .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */
242 .bus_num = 1, 251 .bus_num = 0,
243 .chip_select = 2, 252 .chip_select = 8 - CONFIG_J19_JUMPER,
244 .controller_data = &spi_si3xxx_chip_info, 253 .controller_data = &spi_si3xxx_chip_info,
245 .mode = SPI_MODE_3, 254 .mode = SPI_MODE_3,
246 }, 255 },
@@ -250,7 +259,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
250 { 259 {
251 .modalias = "ad5304_spi", 260 .modalias = "ad5304_spi",
252 .max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */ 261 .max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */
253 .bus_num = 1, 262 .bus_num = 0,
254 .chip_select = 2, 263 .chip_select = 2,
255 .platform_data = NULL, 264 .platform_data = NULL,
256 .controller_data = &ad5304_chip_info, 265 .controller_data = &ad5304_chip_info,
@@ -259,17 +268,33 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
259#endif 268#endif
260}; 269};
261 270
271/* SPI (0) */
272static struct resource bfin_spi0_resource[] = {
273 [0] = {
274 .start = SPI0_REGBASE,
275 .end = SPI0_REGBASE + 0xFF,
276 .flags = IORESOURCE_MEM,
277 },
278 [1] = {
279 .start = CH_SPI,
280 .end = CH_SPI,
281 .flags = IORESOURCE_IRQ,
282 }
283};
284
262/* SPI controller data */ 285/* SPI controller data */
263static struct bfin5xx_spi_master spi_bfin_master_info = { 286static struct bfin5xx_spi_master bfin_spi0_info = {
264 .num_chipselect = 8, 287 .num_chipselect = 8,
265 .enable_dma = 1, /* master has the ability to do dma transfer */ 288 .enable_dma = 1, /* master has the ability to do dma transfer */
266}; 289};
267 290
268static struct platform_device spi_bfin_master_device = { 291static struct platform_device bfin_spi0_device = {
269 .name = "bfin-spi-master", 292 .name = "bfin-spi",
270 .id = 1, /* Bus number */ 293 .id = 0, /* Bus number */
294 .num_resources = ARRAY_SIZE(bfin_spi0_resource),
295 .resource = bfin_spi0_resource,
271 .dev = { 296 .dev = {
272 .platform_data = &spi_bfin_master_info, /* Passed to driver */ 297 .platform_data = &bfin_spi0_info, /* Passed to driver */
273 }, 298 },
274}; 299};
275#endif /* spi master and devices */ 300#endif /* spi master and devices */
@@ -309,6 +334,43 @@ static struct platform_device bfin_sport1_uart_device = {
309}; 334};
310#endif 335#endif
311 336
337#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
338#define PATA_INT 55
339
340static struct pata_platform_info bfin_pata_platform_data = {
341 .ioport_shift = 1,
342 .irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED,
343};
344
345static struct resource bfin_pata_resources[] = {
346 {
347 .start = 0x20314020,
348 .end = 0x2031403F,
349 .flags = IORESOURCE_MEM,
350 },
351 {
352 .start = 0x2031401C,
353 .end = 0x2031401F,
354 .flags = IORESOURCE_MEM,
355 },
356 {
357 .start = PATA_INT,
358 .end = PATA_INT,
359 .flags = IORESOURCE_IRQ,
360 },
361};
362
363static struct platform_device bfin_pata_device = {
364 .name = "pata_platform",
365 .id = -1,
366 .num_resources = ARRAY_SIZE(bfin_pata_resources),
367 .resource = bfin_pata_resources,
368 .dev = {
369 .platform_data = &bfin_pata_platform_data,
370 }
371};
372#endif
373
312static struct platform_device *stamp_devices[] __initdata = { 374static struct platform_device *stamp_devices[] __initdata = {
313#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) 375#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
314 &rtc_device, 376 &rtc_device,
@@ -318,12 +380,16 @@ static struct platform_device *stamp_devices[] __initdata = {
318 &smc91x_device, 380 &smc91x_device,
319#endif 381#endif
320 382
383#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
384 &bfin_fb_adv7393_device,
385#endif
386
321#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) 387#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
322 &net2272_bfin_device, 388 &net2272_bfin_device,
323#endif 389#endif
324 390
325#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) 391#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
326 &spi_bfin_master_device, 392 &bfin_spi0_device,
327#endif 393#endif
328 394
329#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) 395#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
@@ -334,6 +400,10 @@ static struct platform_device *stamp_devices[] __initdata = {
334 &bfin_sport0_uart_device, 400 &bfin_sport0_uart_device,
335 &bfin_sport1_uart_device, 401 &bfin_sport1_uart_device,
336#endif 402#endif
403
404#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
405 &bfin_pata_device,
406#endif
337}; 407};
338 408
339static int __init stamp_init(void) 409static int __init stamp_init(void)
@@ -355,8 +425,23 @@ static int __init stamp_init(void)
355#endif 425#endif
356 426
357#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) 427#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
358 return spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); 428 spi_register_board_info(bfin_spi_board_info,
429 ARRAY_SIZE(bfin_spi_board_info));
430#endif
431#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
432 irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;
359#endif 433#endif
434 return 0;
360} 435}
361 436
362arch_initcall(stamp_init); 437arch_initcall(stamp_init);
438
439void native_machine_restart(char *cmd)
440{
441#if defined(CONFIG_BFIN_SHARED_FLASH_ENET)
442# define BIT_TO_SET (1 << CONFIG_ENET_FLASH_PIN)
443 bfin_write_FIO_INEN(~BIT_TO_SET);
444 bfin_write_FIO_DIR(BIT_TO_SET);
445 bfin_write_FIO_FLAG_C(BIT_TO_SET);
446#endif
447}
diff --git a/arch/blackfin/mach-bf537/boards/cm_bf537.c b/arch/blackfin/mach-bf537/boards/cm_bf537.c
index a8f947b72754..44dea05e1d03 100644
--- a/arch/blackfin/mach-bf537/boards/cm_bf537.c
+++ b/arch/blackfin/mach-bf537/boards/cm_bf537.c
@@ -35,7 +35,9 @@
35#include <linux/spi/spi.h> 35#include <linux/spi/spi.h>
36#include <linux/spi/flash.h> 36#include <linux/spi/flash.h>
37#include <linux/usb_isp1362.h> 37#include <linux/usb_isp1362.h>
38#include <linux/pata_platform.h>
38#include <linux/irq.h> 39#include <linux/irq.h>
40#include <asm/dma.h>
39#include <asm/bfin5xx_spi.h> 41#include <asm/bfin5xx_spi.h>
40 42
41/* 43/*
@@ -113,7 +115,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
113 /* the modalias must be the same as spi device driver name */ 115 /* the modalias must be the same as spi device driver name */
114 .modalias = "m25p80", /* Name of spi_driver for this device */ 116 .modalias = "m25p80", /* Name of spi_driver for this device */
115 .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ 117 .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
116 .bus_num = 1, /* Framework bus number */ 118 .bus_num = 0, /* Framework bus number */
117 .chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/ 119 .chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/
118 .platform_data = &bfin_spi_flash_data, 120 .platform_data = &bfin_spi_flash_data,
119 .controller_data = &spi_flash_chip_info, 121 .controller_data = &spi_flash_chip_info,
@@ -125,7 +127,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
125 { 127 {
126 .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */ 128 .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
127 .max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */ 129 .max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */
128 .bus_num = 1, /* Framework bus number */ 130 .bus_num = 0, /* Framework bus number */
129 .chip_select = 1, /* Framework chip select. */ 131 .chip_select = 1, /* Framework chip select. */
130 .platform_data = NULL, /* No spi_driver specific config */ 132 .platform_data = NULL, /* No spi_driver specific config */
131 .controller_data = &spi_adc_chip_info, 133 .controller_data = &spi_adc_chip_info,
@@ -136,7 +138,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
136 { 138 {
137 .modalias = "ad1836-spi", 139 .modalias = "ad1836-spi",
138 .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ 140 .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
139 .bus_num = 1, 141 .bus_num = 0,
140 .chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT, 142 .chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT,
141 .controller_data = &ad1836_spi_chip_info, 143 .controller_data = &ad1836_spi_chip_info,
142 }, 144 },
@@ -146,7 +148,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
146 { 148 {
147 .modalias = "ad9960-spi", 149 .modalias = "ad9960-spi",
148 .max_speed_hz = 10000000, /* max spi clock (SCK) speed in HZ */ 150 .max_speed_hz = 10000000, /* max spi clock (SCK) speed in HZ */
149 .bus_num = 1, 151 .bus_num = 0,
150 .chip_select = 1, 152 .chip_select = 1,
151 .controller_data = &ad9960_spi_chip_info, 153 .controller_data = &ad9960_spi_chip_info,
152 }, 154 },
@@ -156,7 +158,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
156 { 158 {
157 .modalias = "spi_mmc_dummy", 159 .modalias = "spi_mmc_dummy",
158 .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ 160 .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
159 .bus_num = 1, 161 .bus_num = 0,
160 .chip_select = 7, 162 .chip_select = 7,
161 .platform_data = NULL, 163 .platform_data = NULL,
162 .controller_data = &spi_mmc_chip_info, 164 .controller_data = &spi_mmc_chip_info,
@@ -165,7 +167,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
165 { 167 {
166 .modalias = "spi_mmc", 168 .modalias = "spi_mmc",
167 .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ 169 .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
168 .bus_num = 1, 170 .bus_num = 0,
169 .chip_select = CONFIG_SPI_MMC_CS_CHAN, 171 .chip_select = CONFIG_SPI_MMC_CS_CHAN,
170 .platform_data = NULL, 172 .platform_data = NULL,
171 .controller_data = &spi_mmc_chip_info, 173 .controller_data = &spi_mmc_chip_info,
@@ -174,17 +176,33 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
174#endif 176#endif
175}; 177};
176 178
179/* SPI (0) */
180static struct resource bfin_spi0_resource[] = {
181 [0] = {
182 .start = SPI0_REGBASE,
183 .end = SPI0_REGBASE + 0xFF,
184 .flags = IORESOURCE_MEM,
185 },
186 [1] = {
187 .start = CH_SPI,
188 .end = CH_SPI,
189 .flags = IORESOURCE_IRQ,
190 }
191};
192
177/* SPI controller data */ 193/* SPI controller data */
178static struct bfin5xx_spi_master spi_bfin_master_info = { 194static struct bfin5xx_spi_master bfin_spi0_info = {
179 .num_chipselect = 8, 195 .num_chipselect = 8,
180 .enable_dma = 1, /* master has the ability to do dma transfer */ 196 .enable_dma = 1, /* master has the ability to do dma transfer */
181}; 197};
182 198
183static struct platform_device spi_bfin_master_device = { 199static struct platform_device bfin_spi0_device = {
184 .name = "bfin-spi-master", 200 .name = "bfin-spi",
185 .id = 1, /* Bus number */ 201 .id = 0, /* Bus number */
202 .num_resources = ARRAY_SIZE(bfin_spi0_resource),
203 .resource = bfin_spi0_resource,
186 .dev = { 204 .dev = {
187 .platform_data = &spi_bfin_master_info, /* Passed to driver */ 205 .platform_data = &bfin_spi0_info, /* Passed to driver */
188 }, 206 },
189}; 207};
190#endif /* spi master and devices */ 208#endif /* spi master and devices */
@@ -316,6 +334,43 @@ static struct platform_device bfin_mac_device = {
316}; 334};
317#endif 335#endif
318 336
337#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
338#define PATA_INT 64
339
340static struct pata_platform_info bfin_pata_platform_data = {
341 .ioport_shift = 2,
342 .irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED,
343};
344
345static struct resource bfin_pata_resources[] = {
346 {
347 .start = 0x2030C000,
348 .end = 0x2030C01F,
349 .flags = IORESOURCE_MEM,
350 },
351 {
352 .start = 0x2030D018,
353 .end = 0x2030D01B,
354 .flags = IORESOURCE_MEM,
355 },
356 {
357 .start = PATA_INT,
358 .end = PATA_INT,
359 .flags = IORESOURCE_IRQ,
360 },
361};
362
363static struct platform_device bfin_pata_device = {
364 .name = "pata_platform",
365 .id = -1,
366 .num_resources = ARRAY_SIZE(bfin_pata_resources),
367 .resource = bfin_pata_resources,
368 .dev = {
369 .platform_data = &bfin_pata_platform_data,
370 }
371};
372#endif
373
319static struct platform_device *cm_bf537_devices[] __initdata = { 374static struct platform_device *cm_bf537_devices[] __initdata = {
320#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) 375#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
321 &rtc_device, 376 &rtc_device,
@@ -347,7 +402,11 @@ static struct platform_device *cm_bf537_devices[] __initdata = {
347#endif 402#endif
348 403
349#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) 404#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
350 &spi_bfin_master_device, 405 &bfin_spi0_device,
406#endif
407
408#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
409 &bfin_pata_device,
351#endif 410#endif
352}; 411};
353 412
@@ -358,6 +417,10 @@ static int __init cm_bf537_init(void)
358#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) 417#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
359 spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); 418 spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
360#endif 419#endif
420
421#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
422 irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;
423#endif
361 return 0; 424 return 0;
362} 425}
363 426
diff --git a/arch/blackfin/mach-bf537/boards/generic_board.c b/arch/blackfin/mach-bf537/boards/generic_board.c
index 648d984e98d6..5e9d09eb8579 100644
--- a/arch/blackfin/mach-bf537/boards/generic_board.c
+++ b/arch/blackfin/mach-bf537/boards/generic_board.c
@@ -8,7 +8,7 @@
8 * 8 *
9 * Modified: 9 * Modified:
10 * Copyright 2005 National ICT Australia (NICTA) 10 * Copyright 2005 National ICT Australia (NICTA)
11 * Copyright 2004-2006 Analog Devices Inc. 11 * Copyright 2004-2007 Analog Devices Inc.
12 * 12 *
13 * Bugs: Enter bugs at http://blackfin.uclinux.org/ 13 * Bugs: Enter bugs at http://blackfin.uclinux.org/
14 * 14 *
@@ -34,20 +34,74 @@
34#include <linux/mtd/partitions.h> 34#include <linux/mtd/partitions.h>
35#include <linux/spi/spi.h> 35#include <linux/spi/spi.h>
36#include <linux/spi/flash.h> 36#include <linux/spi/flash.h>
37#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
37#include <linux/usb_isp1362.h> 38#include <linux/usb_isp1362.h>
39#endif
40#include <linux/pata_platform.h>
38#include <linux/irq.h> 41#include <linux/irq.h>
42#include <linux/interrupt.h>
39#include <linux/usb_sl811.h> 43#include <linux/usb_sl811.h>
44#include <asm/dma.h>
40#include <asm/bfin5xx_spi.h> 45#include <asm/bfin5xx_spi.h>
46#include <asm/reboot.h>
47#include <linux/spi/ad7877.h>
41 48
42/* 49/*
43 * Name the Board for the /proc/cpuinfo 50 * Name the Board for the /proc/cpuinfo
44 */ 51 */
45char *bfin_board_name = "UNKNOWN BOARD"; 52char *bfin_board_name = "GENERIC Board";
46 53
47/* 54/*
48 * Driver needs to know address, irq and flag pin. 55 * Driver needs to know address, irq and flag pin.
49 */ 56 */
50 57
58#define ISP1761_BASE 0x203C0000
59#define ISP1761_IRQ IRQ_PF7
60
61#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
62static struct resource bfin_isp1761_resources[] = {
63 [0] = {
64 .name = "isp1761-regs",
65 .start = ISP1761_BASE + 0x00000000,
66 .end = ISP1761_BASE + 0x000fffff,
67 .flags = IORESOURCE_MEM,
68 },
69 [1] = {
70 .start = ISP1761_IRQ,
71 .end = ISP1761_IRQ,
72 .flags = IORESOURCE_IRQ,
73 },
74};
75
76static struct platform_device bfin_isp1761_device = {
77 .name = "isp1761",
78 .id = 0,
79 .num_resources = ARRAY_SIZE(bfin_isp1761_resources),
80 .resource = bfin_isp1761_resources,
81};
82
83static struct platform_device *bfin_isp1761_devices[] = {
84 &bfin_isp1761_device,
85};
86
87int __init bfin_isp1761_init(void)
88{
89 unsigned int num_devices = ARRAY_SIZE(bfin_isp1761_devices);
90
91 printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__);
92 set_irq_type(ISP1761_IRQ, IRQF_TRIGGER_FALLING);
93
94 return platform_add_devices(bfin_isp1761_devices, num_devices);
95}
96
97void __exit bfin_isp1761_exit(void)
98{
99 platform_device_unregister(&bfin_isp1761_device);
100}
101
102arch_initcall(bfin_isp1761_init);
103#endif
104
51#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE) 105#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
52static struct resource bfin_pcmcia_cf_resources[] = { 106static struct resource bfin_pcmcia_cf_resources[] = {
53 { 107 {
@@ -59,10 +113,6 @@ static struct resource bfin_pcmcia_cf_resources[] = {
59 .end = 0x20311FFF, 113 .end = 0x20311FFF,
60 .flags = IORESOURCE_MEM, 114 .flags = IORESOURCE_MEM,
61 }, { 115 }, {
62 .start = IRQ_PROG_INTA,
63 .end = IRQ_PROG_INTA,
64 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
65 }, {
66 .start = IRQ_PF4, 116 .start = IRQ_PF4,
67 .end = IRQ_PF4, 117 .end = IRQ_PF4,
68 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, 118 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
@@ -96,14 +146,7 @@ static struct resource smc91x_resources[] = {
96 .end = 0x20300300 + 16, 146 .end = 0x20300300 + 16,
97 .flags = IORESOURCE_MEM, 147 .flags = IORESOURCE_MEM,
98 }, { 148 }, {
99 .start = IRQ_PROG_INTB, 149
100 .end = IRQ_PROG_INTB,
101 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
102 }, {
103 /*
104 * denotes the flag pin and is used directly if
105 * CONFIG_IRQCHIP_DEMUX_GPIO is defined.
106 */
107 .start = IRQ_PF7, 150 .start = IRQ_PF7,
108 .end = IRQ_PF7, 151 .end = IRQ_PF7,
109 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, 152 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
@@ -117,6 +160,28 @@ static struct platform_device smc91x_device = {
117}; 160};
118#endif 161#endif
119 162
163#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
164static struct resource dm9000_resources[] = {
165 [0] = {
166 .start = 0x203FB800,
167 .end = 0x203FB800 + 8,
168 .flags = IORESOURCE_MEM,
169 },
170 [1] = {
171 .start = IRQ_PF9,
172 .end = IRQ_PF9,
173 .flags = (IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE),
174 },
175};
176
177static struct platform_device dm9000_device = {
178 .name = "dm9000",
179 .id = -1,
180 .num_resources = ARRAY_SIZE(dm9000_resources),
181 .resource = dm9000_resources,
182};
183#endif
184
120#if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE) 185#if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE)
121static struct resource sl811_hcd_resources[] = { 186static struct resource sl811_hcd_resources[] = {
122 { 187 {
@@ -128,12 +193,8 @@ static struct resource sl811_hcd_resources[] = {
128 .end = 0x20340004, 193 .end = 0x20340004,
129 .flags = IORESOURCE_MEM, 194 .flags = IORESOURCE_MEM,
130 }, { 195 }, {
131 .start = IRQ_PROG_INTA, 196 .start = CONFIG_USB_SL811_BFIN_IRQ,
132 .end = IRQ_PROG_INTA, 197 .end = CONFIG_USB_SL811_BFIN_IRQ,
133 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
134 }, {
135 .start = IRQ_PF0 + CONFIG_USB_SL811_BFIN_GPIO,
136 .end = IRQ_PF0 + CONFIG_USB_SL811_BFIN_GPIO,
137 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, 198 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
138 }, 199 },
139}; 200};
@@ -141,21 +202,19 @@ static struct resource sl811_hcd_resources[] = {
141#if defined(CONFIG_USB_SL811_BFIN_USE_VBUS) 202#if defined(CONFIG_USB_SL811_BFIN_USE_VBUS)
142void sl811_port_power(struct device *dev, int is_on) 203void sl811_port_power(struct device *dev, int is_on)
143{ 204{
144 unsigned short mask = (1<<CONFIG_USB_SL811_BFIN_GPIO_VBUS); 205 gpio_request(CONFIG_USB_SL811_BFIN_GPIO_VBUS, "usb:SL811_VBUS");
145 206 gpio_direction_output(CONFIG_USB_SL811_BFIN_GPIO_VBUS);
146 bfin_write_PORT_FER(bfin_read_PORT_FER() & ~mask);
147 bfin_write_FIO_DIR(bfin_read_FIO_DIR() | mask);
148 207
149 if (is_on) 208 if (is_on)
150 bfin_write_FIO_FLAG_S(mask); 209 gpio_set_value(CONFIG_USB_SL811_BFIN_GPIO_VBUS, 1);
151 else 210 else
152 bfin_write_FIO_FLAG_C(mask); 211 gpio_set_value(CONFIG_USB_SL811_BFIN_GPIO_VBUS, 0);
153} 212}
154#endif 213#endif
155 214
156static struct sl811_platform_data sl811_priv = { 215static struct sl811_platform_data sl811_priv = {
157 .potpg = 10, 216 .potpg = 10,
158 .power = 250, /* == 500mA */ 217 .power = 250, /* == 500mA */
159#if defined(CONFIG_USB_SL811_BFIN_USE_VBUS) 218#if defined(CONFIG_USB_SL811_BFIN_USE_VBUS)
160 .port_power = &sl811_port_power, 219 .port_power = &sl811_port_power,
161#endif 220#endif
@@ -170,7 +229,6 @@ static struct platform_device sl811_hcd_device = {
170 .num_resources = ARRAY_SIZE(sl811_hcd_resources), 229 .num_resources = ARRAY_SIZE(sl811_hcd_resources),
171 .resource = sl811_hcd_resources, 230 .resource = sl811_hcd_resources,
172}; 231};
173
174#endif 232#endif
175 233
176#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) 234#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
@@ -184,13 +242,9 @@ static struct resource isp1362_hcd_resources[] = {
184 .end = 0x20360004, 242 .end = 0x20360004,
185 .flags = IORESOURCE_MEM, 243 .flags = IORESOURCE_MEM,
186 }, { 244 }, {
187 .start = IRQ_PROG_INTA, 245 .start = CONFIG_USB_ISP1362_BFIN_GPIO_IRQ,
188 .end = IRQ_PROG_INTA, 246 .end = CONFIG_USB_ISP1362_BFIN_GPIO_IRQ,
189 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, 247 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
190 }, {
191 .start = IRQ_PF0 + CONFIG_USB_ISP1362_BFIN_GPIO,
192 .end = IRQ_PF0 + CONFIG_USB_ISP1362_BFIN_GPIO,
193 .flags = IORESOURCE_IRQ,
194 }, 248 },
195}; 249};
196 250
@@ -246,7 +300,8 @@ static struct platform_device net2272_bfin_device = {
246#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) 300#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
247/* all SPI peripherals info goes here */ 301/* all SPI peripherals info goes here */
248 302
249#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE) 303#if defined(CONFIG_MTD_M25P80) \
304 || defined(CONFIG_MTD_M25P80_MODULE)
250static struct mtd_partition bfin_spi_flash_partitions[] = { 305static struct mtd_partition bfin_spi_flash_partitions[] = {
251 { 306 {
252 .name = "bootloader", 307 .name = "bootloader",
@@ -302,70 +357,198 @@ static struct bfin5xx_spi_chip ad9960_spi_chip_info = {
302}; 357};
303#endif 358#endif
304 359
360#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
361static struct bfin5xx_spi_chip spi_mmc_chip_info = {
362 .enable_dma = 1,
363 .bits_per_word = 8,
364};
365#endif
366
367#if defined(CONFIG_PBX)
368static struct bfin5xx_spi_chip spi_si3xxx_chip_info = {
369 .ctl_reg = 0x4, /* send zero */
370 .enable_dma = 0,
371 .bits_per_word = 8,
372 .cs_change_per_word = 1,
373};
374#endif
375
376#if defined(CONFIG_AD5304) || defined(CONFIG_AD5304_MODULE)
377static struct bfin5xx_spi_chip ad5304_chip_info = {
378 .enable_dma = 0,
379 .bits_per_word = 16,
380};
381#endif
382
383#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
384static struct bfin5xx_spi_chip spi_ad7877_chip_info = {
385 .enable_dma = 0,
386 .bits_per_word = 16,
387};
388
389static const struct ad7877_platform_data bfin_ad7877_ts_info = {
390 .model = 7877,
391 .vref_delay_usecs = 50, /* internal, no capacitor */
392 .x_plate_ohms = 419,
393 .y_plate_ohms = 486,
394 .pressure_max = 1000,
395 .pressure_min = 0,
396 .stopacq_polarity = 1,
397 .first_conversion_delay = 3,
398 .acquisition_time = 1,
399 .averaging = 1,
400 .pen_down_acc_interval = 1,
401};
402#endif
403
305static struct spi_board_info bfin_spi_board_info[] __initdata = { 404static struct spi_board_info bfin_spi_board_info[] __initdata = {
306#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE) 405#if defined(CONFIG_MTD_M25P80) \
406 || defined(CONFIG_MTD_M25P80_MODULE)
307 { 407 {
308 /* the modalias must be the same as spi device driver name */ 408 /* the modalias must be the same as spi device driver name */
309 .modalias = "m25p80", /* Name of spi_driver for this device */ 409 .modalias = "m25p80", /* Name of spi_driver for this device */
310 .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ 410 .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
311 .bus_num = 1, /* Framework bus number */ 411 .bus_num = 0, /* Framework bus number */
312 .chip_select = 2, /* Framework chip select. On STAMP537 it is SPISSEL1*/ 412 .chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/
313 .platform_data = &bfin_spi_flash_data, 413 .platform_data = &bfin_spi_flash_data,
314 .controller_data = &spi_flash_chip_info, 414 .controller_data = &spi_flash_chip_info,
315 .mode = SPI_MODE_3, 415 .mode = SPI_MODE_3,
316 }, 416 },
317#endif 417#endif
318 418
319#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE) 419#if defined(CONFIG_SPI_ADC_BF533) \
420 || defined(CONFIG_SPI_ADC_BF533_MODULE)
320 { 421 {
321 .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */ 422 .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
322 .max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */ 423 .max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */
323 .bus_num = 1, /* Framework bus number */ 424 .bus_num = 0, /* Framework bus number */
324 .chip_select = 1, /* Framework chip select. */ 425 .chip_select = 1, /* Framework chip select. */
325 .platform_data = NULL, /* No spi_driver specific config */ 426 .platform_data = NULL, /* No spi_driver specific config */
326 .controller_data = &spi_adc_chip_info, 427 .controller_data = &spi_adc_chip_info,
327 }, 428 },
328#endif 429#endif
329 430
330#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE) 431#if defined(CONFIG_SND_BLACKFIN_AD1836) \
432 || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
331 { 433 {
332 .modalias = "ad1836-spi", 434 .modalias = "ad1836-spi",
333 .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ 435 .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
334 .bus_num = 1, 436 .bus_num = 0,
335 .chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT, 437 .chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT,
336 .controller_data = &ad1836_spi_chip_info, 438 .controller_data = &ad1836_spi_chip_info,
337 }, 439 },
338#endif 440#endif
339
340#if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE) 441#if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE)
341 { 442 {
342 .modalias = "ad9960-spi", 443 .modalias = "ad9960-spi",
343 .max_speed_hz = 10000000, /* max spi clock (SCK) speed in HZ */ 444 .max_speed_hz = 10000000, /* max spi clock (SCK) speed in HZ */
344 .bus_num = 1, 445 .bus_num = 0,
345 .chip_select = 1, 446 .chip_select = 1,
346 .controller_data = &ad9960_spi_chip_info, 447 .controller_data = &ad9960_spi_chip_info,
347 }, 448 },
348#endif 449#endif
450#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
451 {
452 .modalias = "spi_mmc_dummy",
453 .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
454 .bus_num = 0,
455 .chip_select = 0,
456 .platform_data = NULL,
457 .controller_data = &spi_mmc_chip_info,
458 .mode = SPI_MODE_3,
459 },
460 {
461 .modalias = "spi_mmc",
462 .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
463 .bus_num = 0,
464 .chip_select = CONFIG_SPI_MMC_CS_CHAN,
465 .platform_data = NULL,
466 .controller_data = &spi_mmc_chip_info,
467 .mode = SPI_MODE_3,
468 },
469#endif
470#if defined(CONFIG_PBX)
471 {
472 .modalias = "fxs-spi",
473 .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */
474 .bus_num = 0,
475 .chip_select = 8 - CONFIG_J11_JUMPER,
476 .controller_data = &spi_si3xxx_chip_info,
477 .mode = SPI_MODE_3,
478 },
479 {
480 .modalias = "fxo-spi",
481 .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */
482 .bus_num = 0,
483 .chip_select = 8 - CONFIG_J19_JUMPER,
484 .controller_data = &spi_si3xxx_chip_info,
485 .mode = SPI_MODE_3,
486 },
487#endif
488#if defined(CONFIG_AD5304) || defined(CONFIG_AD5304_MODULE)
489 {
490 .modalias = "ad5304_spi",
491 .max_speed_hz = 1250000, /* max spi clock (SCK) speed in HZ */
492 .bus_num = 0,
493 .chip_select = 2,
494 .platform_data = NULL,
495 .controller_data = &ad5304_chip_info,
496 .mode = SPI_MODE_2,
497 },
498#endif
499#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
500 {
501 .modalias = "ad7877",
502 .platform_data = &bfin_ad7877_ts_info,
503 .irq = IRQ_PF6,
504 .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */
505 .bus_num = 1,
506 .chip_select = 1,
507 .controller_data = &spi_ad7877_chip_info,
508 },
509#endif
349}; 510};
350 511
351/* SPI controller data */ 512/* SPI controller data */
352static struct bfin5xx_spi_master spi_bfin_master_info = { 513static struct bfin5xx_spi_master bfin_spi0_info = {
353 .num_chipselect = 8, 514 .num_chipselect = 8,
354 .enable_dma = 1, /* master has the ability to do dma transfer */ 515 .enable_dma = 1, /* master has the ability to do dma transfer */
355}; 516};
356 517
357static struct platform_device spi_bfin_master_device = { 518/* SPI (0) */
358 .name = "bfin-spi-master", 519static struct resource bfin_spi0_resource[] = {
359 .id = 1, /* Bus number */ 520 [0] = {
521 .start = SPI0_REGBASE,
522 .end = SPI0_REGBASE + 0xFF,
523 .flags = IORESOURCE_MEM,
524 },
525 [1] = {
526 .start = CH_SPI,
527 .end = CH_SPI,
528 .flags = IORESOURCE_IRQ,
529 },
530};
531
532static struct platform_device bfin_spi0_device = {
533 .name = "bfin-spi",
534 .id = 0, /* Bus number */
535 .num_resources = ARRAY_SIZE(bfin_spi0_resource),
536 .resource = bfin_spi0_resource,
360 .dev = { 537 .dev = {
361 .platform_data = &spi_bfin_master_info, /* Passed to driver */ 538 .platform_data = &bfin_spi0_info, /* Passed to driver */
362 }, 539 },
363}; 540};
364#endif /* spi master and devices */ 541#endif /* spi master and devices */
365 542
366#if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE) 543#if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE)
367static struct platform_device bfin_fb_device = { 544static struct platform_device bfin_fb_device = {
368 .name = "bf537-fb", 545 .name = "bf537-lq035",
546};
547#endif
548
549#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
550static struct platform_device bfin_fb_adv7393_device = {
551 .name = "bfin-adv7393",
369}; 552};
370#endif 553#endif
371 554
@@ -390,15 +573,86 @@ static struct platform_device bfin_uart_device = {
390}; 573};
391#endif 574#endif
392 575
393static struct platform_device *stamp_devices[] __initdata = { 576#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
394#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) 577static struct resource bfin_twi0_resource[] = {
395 &rtc_device, 578 [0] = {
579 .start = TWI0_REGBASE,
580 .end = TWI0_REGBASE + 0xFF,
581 .flags = IORESOURCE_MEM,
582 },
583 [1] = {
584 .start = IRQ_TWI,
585 .end = IRQ_TWI,
586 .flags = IORESOURCE_IRQ,
587 },
588};
589
590static struct platform_device i2c_bfin_twi_device = {
591 .name = "i2c-bfin-twi",
592 .id = 0,
593 .num_resources = ARRAY_SIZE(bfin_twi0_resource),
594 .resource = bfin_twi0_resource,
595};
596#endif
597
598#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
599static struct platform_device bfin_sport0_uart_device = {
600 .name = "bfin-sport-uart",
601 .id = 0,
602};
603
604static struct platform_device bfin_sport1_uart_device = {
605 .name = "bfin-sport-uart",
606 .id = 1,
607};
608#endif
609
610#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
611#define PATA_INT 55
612
613static struct pata_platform_info bfin_pata_platform_data = {
614 .ioport_shift = 1,
615 .irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED,
616};
617
618static struct resource bfin_pata_resources[] = {
619 {
620 .start = 0x20314020,
621 .end = 0x2031403F,
622 .flags = IORESOURCE_MEM,
623 },
624 {
625 .start = 0x2031401C,
626 .end = 0x2031401F,
627 .flags = IORESOURCE_MEM,
628 },
629 {
630 .start = PATA_INT,
631 .end = PATA_INT,
632 .flags = IORESOURCE_IRQ,
633 },
634};
635
636static struct platform_device bfin_pata_device = {
637 .name = "pata_platform",
638 .id = -1,
639 .num_resources = ARRAY_SIZE(bfin_pata_resources),
640 .resource = bfin_pata_resources,
641 .dev = {
642 .platform_data = &bfin_pata_platform_data,
643 }
644};
396#endif 645#endif
397 646
647static struct platform_device *stamp_devices[] __initdata = {
398#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE) 648#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
399 &bfin_pcmcia_cf_device, 649 &bfin_pcmcia_cf_device,
400#endif 650#endif
401 651
652#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
653 &rtc_device,
654#endif
655
402#if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE) 656#if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE)
403 &sl811_hcd_device, 657 &sl811_hcd_device,
404#endif 658#endif
@@ -411,6 +665,10 @@ static struct platform_device *stamp_devices[] __initdata = {
411 &smc91x_device, 665 &smc91x_device,
412#endif 666#endif
413 667
668#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
669 &dm9000_device,
670#endif
671
414#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) 672#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
415 &bfin_mac_device, 673 &bfin_mac_device,
416#endif 674#endif
@@ -420,16 +678,33 @@ static struct platform_device *stamp_devices[] __initdata = {
420#endif 678#endif
421 679
422#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) 680#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
423 &spi_bfin_master_device, 681 &bfin_spi0_device,
424#endif 682#endif
425 683
426#if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE) 684#if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE)
427 &bfin_fb_device, 685 &bfin_fb_device,
428#endif 686#endif
429 687
688#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
689 &bfin_fb_adv7393_device,
690#endif
691
430#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) 692#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
431 &bfin_uart_device, 693 &bfin_uart_device,
432#endif 694#endif
695
696#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
697 &i2c_bfin_twi_device,
698#endif
699
700#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
701 &bfin_sport0_uart_device,
702 &bfin_sport1_uart_device,
703#endif
704
705#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
706 &bfin_pata_device,
707#endif
433}; 708};
434 709
435static int __init stamp_init(void) 710static int __init stamp_init(void)
@@ -437,9 +712,21 @@ static int __init stamp_init(void)
437 printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__); 712 printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__);
438 platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices)); 713 platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
439#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) 714#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
440 spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); 715 spi_register_board_info(bfin_spi_board_info,
716 ARRAY_SIZE(bfin_spi_board_info));
717#endif
718
719#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
720 irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;
441#endif 721#endif
442 return 0; 722 return 0;
443} 723}
444 724
445arch_initcall(stamp_init); 725arch_initcall(stamp_init);
726
727void native_machine_restart(char *cmd)
728{
729 /* workaround reboot hang when booting from SPI */
730 if ((bfin_read_SYSCR() & 0x7) == 0x3)
731 bfin_gpio_reset_spi0_ssel1();
732}
diff --git a/arch/blackfin/mach-bf537/boards/pnav10.c b/arch/blackfin/mach-bf537/boards/pnav10.c
index 8806f1230f2d..20507e92a3a4 100644
--- a/arch/blackfin/mach-bf537/boards/pnav10.c
+++ b/arch/blackfin/mach-bf537/boards/pnav10.c
@@ -38,6 +38,7 @@
38#include <linux/usb_isp1362.h> 38#include <linux/usb_isp1362.h>
39#endif 39#endif
40#include <linux/irq.h> 40#include <linux/irq.h>
41#include <asm/dma.h>
41#include <asm/bfin5xx_spi.h> 42#include <asm/bfin5xx_spi.h>
42#include <linux/usb_sl811.h> 43#include <linux/usb_sl811.h>
43 44
@@ -130,15 +131,13 @@ static struct resource sl811_hcd_resources[] = {
130#if defined(CONFIG_USB_SL811_BFIN_USE_VBUS) 131#if defined(CONFIG_USB_SL811_BFIN_USE_VBUS)
131void sl811_port_power(struct device *dev, int is_on) 132void sl811_port_power(struct device *dev, int is_on)
132{ 133{
133 unsigned short mask = (1 << CONFIG_USB_SL811_BFIN_GPIO_VBUS); 134 gpio_request(CONFIG_USB_SL811_BFIN_GPIO_VBUS, "usb:SL811_VBUS");
134 135 gpio_direction_output(CONFIG_USB_SL811_BFIN_GPIO_VBUS);
135 bfin_write_PORT_FER(bfin_read_PORT_FER() & ~mask);
136 bfin_write_FIO_DIR(bfin_read_FIO_DIR() | mask);
137 136
138 if (is_on) 137 if (is_on)
139 bfin_write_FIO_FLAG_S(mask); 138 gpio_set_value(CONFIG_USB_SL811_BFIN_GPIO_VBUS, 1);
140 else 139 else
141 bfin_write_FIO_FLAG_C(mask); 140 gpio_set_value(CONFIG_USB_SL811_BFIN_GPIO_VBUS, 0);
142} 141}
143#endif 142#endif
144 143
@@ -323,7 +322,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
323 /* the modalias must be the same as spi device driver name */ 322 /* the modalias must be the same as spi device driver name */
324 .modalias = "m25p80", /* Name of spi_driver for this device */ 323 .modalias = "m25p80", /* Name of spi_driver for this device */
325 .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ 324 .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
326 .bus_num = 1, /* Framework bus number */ 325 .bus_num = 0, /* Framework bus number */
327 .chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/ 326 .chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/
328 .platform_data = &bfin_spi_flash_data, 327 .platform_data = &bfin_spi_flash_data,
329 .controller_data = &spi_flash_chip_info, 328 .controller_data = &spi_flash_chip_info,
@@ -336,7 +335,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
336 { 335 {
337 .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */ 336 .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
338 .max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */ 337 .max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */
339 .bus_num = 1, /* Framework bus number */ 338 .bus_num = 0, /* Framework bus number */
340 .chip_select = 1, /* Framework chip select. */ 339 .chip_select = 1, /* Framework chip select. */
341 .platform_data = NULL, /* No spi_driver specific config */ 340 .platform_data = NULL, /* No spi_driver specific config */
342 .controller_data = &spi_adc_chip_info, 341 .controller_data = &spi_adc_chip_info,
@@ -348,7 +347,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
348 { 347 {
349 .modalias = "ad1836-spi", 348 .modalias = "ad1836-spi",
350 .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ 349 .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
351 .bus_num = 1, 350 .bus_num = 0,
352 .chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT, 351 .chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT,
353 .controller_data = &ad1836_spi_chip_info, 352 .controller_data = &ad1836_spi_chip_info,
354 }, 353 },
@@ -357,7 +356,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
357 { 356 {
358 .modalias = "ad9960-spi", 357 .modalias = "ad9960-spi",
359 .max_speed_hz = 10000000, /* max spi clock (SCK) speed in HZ */ 358 .max_speed_hz = 10000000, /* max spi clock (SCK) speed in HZ */
360 .bus_num = 1, 359 .bus_num = 0,
361 .chip_select = 1, 360 .chip_select = 1,
362 .controller_data = &ad9960_spi_chip_info, 361 .controller_data = &ad9960_spi_chip_info,
363 }, 362 },
@@ -366,7 +365,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
366 { 365 {
367 .modalias = "spi_mmc_dummy", 366 .modalias = "spi_mmc_dummy",
368 .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ 367 .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
369 .bus_num = 1, 368 .bus_num = 0,
370 .chip_select = 7, 369 .chip_select = 7,
371 .platform_data = NULL, 370 .platform_data = NULL,
372 .controller_data = &spi_mmc_chip_info, 371 .controller_data = &spi_mmc_chip_info,
@@ -375,7 +374,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
375 { 374 {
376 .modalias = "spi_mmc", 375 .modalias = "spi_mmc",
377 .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ 376 .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
378 .bus_num = 1, 377 .bus_num = 0,
379 .chip_select = CONFIG_SPI_MMC_CS_CHAN, 378 .chip_select = CONFIG_SPI_MMC_CS_CHAN,
380 .platform_data = NULL, 379 .platform_data = NULL,
381 .controller_data = &spi_mmc_chip_info, 380 .controller_data = &spi_mmc_chip_info,
@@ -396,24 +395,40 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
396 395
397}; 396};
398 397
398/* SPI (0) */
399static struct resource bfin_spi0_resource[] = {
400 [0] = {
401 .start = SPI0_REGBASE,
402 .end = SPI0_REGBASE + 0xFF,
403 .flags = IORESOURCE_MEM,
404 },
405 [1] = {
406 .start = CH_SPI,
407 .end = CH_SPI,
408 .flags = IORESOURCE_IRQ,
409 }
410};
411
399/* SPI controller data */ 412/* SPI controller data */
400static struct bfin5xx_spi_master spi_bfin_master_info = { 413static struct bfin5xx_spi_master bfin_spi0_info = {
401 .num_chipselect = 8, 414 .num_chipselect = 8,
402 .enable_dma = 1, /* master has the ability to do dma transfer */ 415 .enable_dma = 1, /* master has the ability to do dma transfer */
403}; 416};
404 417
405static struct platform_device spi_bfin_master_device = { 418static struct platform_device bfin_spi0_device = {
406 .name = "bfin-spi-master", 419 .name = "bfin-spi",
407 .id = 1, /* Bus number */ 420 .id = 0, /* Bus number */
421 .num_resources = ARRAY_SIZE(bfin_spi0_resource),
422 .resource = bfin_spi0_resource,
408 .dev = { 423 .dev = {
409 .platform_data = &spi_bfin_master_info, /* Passed to driver */ 424 .platform_data = &bfin_spi0_info, /* Passed to driver */
410 }, 425 },
411}; 426};
412#endif /* spi master and devices */ 427#endif /* spi master and devices */
413 428
414#if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE) 429#if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE)
415static struct platform_device bfin_fb_device = { 430static struct platform_device bfin_fb_device = {
416 .name = "bf537-fb", 431 .name = "bf537-lq035",
417}; 432};
418#endif 433#endif
419 434
@@ -469,7 +484,7 @@ static struct platform_device *stamp_devices[] __initdata = {
469#endif 484#endif
470 485
471#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) 486#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
472 &spi_bfin_master_device, 487 &bfin_spi0_device,
473#endif 488#endif
474 489
475#if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE) 490#if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE)
diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c
index 9c43d7756510..47d7d4a0e73d 100644
--- a/arch/blackfin/mach-bf537/boards/stamp.c
+++ b/arch/blackfin/mach-bf537/boards/stamp.c
@@ -37,10 +37,13 @@
37#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) 37#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
38#include <linux/usb_isp1362.h> 38#include <linux/usb_isp1362.h>
39#endif 39#endif
40#include <linux/pata_platform.h>
40#include <linux/irq.h> 41#include <linux/irq.h>
41#include <linux/interrupt.h> 42#include <linux/interrupt.h>
42#include <linux/usb_sl811.h> 43#include <linux/usb_sl811.h>
44#include <asm/dma.h>
43#include <asm/bfin5xx_spi.h> 45#include <asm/bfin5xx_spi.h>
46#include <asm/reboot.h>
44#include <linux/spi/ad7877.h> 47#include <linux/spi/ad7877.h>
45 48
46/* 49/*
@@ -199,15 +202,13 @@ static struct resource sl811_hcd_resources[] = {
199#if defined(CONFIG_USB_SL811_BFIN_USE_VBUS) 202#if defined(CONFIG_USB_SL811_BFIN_USE_VBUS)
200void sl811_port_power(struct device *dev, int is_on) 203void sl811_port_power(struct device *dev, int is_on)
201{ 204{
202 unsigned short mask = (1 << CONFIG_USB_SL811_BFIN_GPIO_VBUS); 205 gpio_request(CONFIG_USB_SL811_BFIN_GPIO_VBUS, "usb:SL811_VBUS");
203 206 gpio_direction_output(CONFIG_USB_SL811_BFIN_GPIO_VBUS);
204 bfin_write_PORT_FER(bfin_read_PORT_FER() & ~mask);
205 bfin_write_FIO_DIR(bfin_read_FIO_DIR() | mask);
206 207
207 if (is_on) 208 if (is_on)
208 bfin_write_FIO_FLAG_S(mask); 209 gpio_set_value(CONFIG_USB_SL811_BFIN_GPIO_VBUS, 1);
209 else 210 else
210 bfin_write_FIO_FLAG_C(mask); 211 gpio_set_value(CONFIG_USB_SL811_BFIN_GPIO_VBUS, 0);
211} 212}
212#endif 213#endif
213 214
@@ -407,7 +408,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
407 /* the modalias must be the same as spi device driver name */ 408 /* the modalias must be the same as spi device driver name */
408 .modalias = "m25p80", /* Name of spi_driver for this device */ 409 .modalias = "m25p80", /* Name of spi_driver for this device */
409 .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ 410 .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
410 .bus_num = 1, /* Framework bus number */ 411 .bus_num = 0, /* Framework bus number */
411 .chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/ 412 .chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/
412 .platform_data = &bfin_spi_flash_data, 413 .platform_data = &bfin_spi_flash_data,
413 .controller_data = &spi_flash_chip_info, 414 .controller_data = &spi_flash_chip_info,
@@ -420,7 +421,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
420 { 421 {
421 .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */ 422 .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
422 .max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */ 423 .max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */
423 .bus_num = 1, /* Framework bus number */ 424 .bus_num = 0, /* Framework bus number */
424 .chip_select = 1, /* Framework chip select. */ 425 .chip_select = 1, /* Framework chip select. */
425 .platform_data = NULL, /* No spi_driver specific config */ 426 .platform_data = NULL, /* No spi_driver specific config */
426 .controller_data = &spi_adc_chip_info, 427 .controller_data = &spi_adc_chip_info,
@@ -432,7 +433,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
432 { 433 {
433 .modalias = "ad1836-spi", 434 .modalias = "ad1836-spi",
434 .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ 435 .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
435 .bus_num = 1, 436 .bus_num = 0,
436 .chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT, 437 .chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT,
437 .controller_data = &ad1836_spi_chip_info, 438 .controller_data = &ad1836_spi_chip_info,
438 }, 439 },
@@ -441,7 +442,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
441 { 442 {
442 .modalias = "ad9960-spi", 443 .modalias = "ad9960-spi",
443 .max_speed_hz = 10000000, /* max spi clock (SCK) speed in HZ */ 444 .max_speed_hz = 10000000, /* max spi clock (SCK) speed in HZ */
444 .bus_num = 1, 445 .bus_num = 0,
445 .chip_select = 1, 446 .chip_select = 1,
446 .controller_data = &ad9960_spi_chip_info, 447 .controller_data = &ad9960_spi_chip_info,
447 }, 448 },
@@ -450,7 +451,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
450 { 451 {
451 .modalias = "spi_mmc_dummy", 452 .modalias = "spi_mmc_dummy",
452 .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ 453 .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
453 .bus_num = 1, 454 .bus_num = 0,
454 .chip_select = 0, 455 .chip_select = 0,
455 .platform_data = NULL, 456 .platform_data = NULL,
456 .controller_data = &spi_mmc_chip_info, 457 .controller_data = &spi_mmc_chip_info,
@@ -459,7 +460,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
459 { 460 {
460 .modalias = "spi_mmc", 461 .modalias = "spi_mmc",
461 .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ 462 .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
462 .bus_num = 1, 463 .bus_num = 0,
463 .chip_select = CONFIG_SPI_MMC_CS_CHAN, 464 .chip_select = CONFIG_SPI_MMC_CS_CHAN,
464 .platform_data = NULL, 465 .platform_data = NULL,
465 .controller_data = &spi_mmc_chip_info, 466 .controller_data = &spi_mmc_chip_info,
@@ -470,16 +471,16 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
470 { 471 {
471 .modalias = "fxs-spi", 472 .modalias = "fxs-spi",
472 .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */ 473 .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */
473 .bus_num = 1, 474 .bus_num = 0,
474 .chip_select = 3, 475 .chip_select = 8 - CONFIG_J11_JUMPER,
475 .controller_data = &spi_si3xxx_chip_info, 476 .controller_data = &spi_si3xxx_chip_info,
476 .mode = SPI_MODE_3, 477 .mode = SPI_MODE_3,
477 }, 478 },
478 { 479 {
479 .modalias = "fxo-spi", 480 .modalias = "fxo-spi",
480 .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */ 481 .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */
481 .bus_num = 1, 482 .bus_num = 0,
482 .chip_select = 2, 483 .chip_select = 8 - CONFIG_J19_JUMPER,
483 .controller_data = &spi_si3xxx_chip_info, 484 .controller_data = &spi_si3xxx_chip_info,
484 .mode = SPI_MODE_3, 485 .mode = SPI_MODE_3,
485 }, 486 },
@@ -488,7 +489,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
488 { 489 {
489 .modalias = "ad5304_spi", 490 .modalias = "ad5304_spi",
490 .max_speed_hz = 1250000, /* max spi clock (SCK) speed in HZ */ 491 .max_speed_hz = 1250000, /* max spi clock (SCK) speed in HZ */
491 .bus_num = 1, 492 .bus_num = 0,
492 .chip_select = 2, 493 .chip_select = 2,
493 .platform_data = NULL, 494 .platform_data = NULL,
494 .controller_data = &ad5304_chip_info, 495 .controller_data = &ad5304_chip_info,
@@ -509,23 +510,45 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
509}; 510};
510 511
511/* SPI controller data */ 512/* SPI controller data */
512static struct bfin5xx_spi_master spi_bfin_master_info = { 513static struct bfin5xx_spi_master bfin_spi0_info = {
513 .num_chipselect = 8, 514 .num_chipselect = 8,
514 .enable_dma = 1, /* master has the ability to do dma transfer */ 515 .enable_dma = 1, /* master has the ability to do dma transfer */
515}; 516};
516 517
517static struct platform_device spi_bfin_master_device = { 518/* SPI (0) */
518 .name = "bfin-spi-master", 519static struct resource bfin_spi0_resource[] = {
519 .id = 1, /* Bus number */ 520 [0] = {
521 .start = SPI0_REGBASE,
522 .end = SPI0_REGBASE + 0xFF,
523 .flags = IORESOURCE_MEM,
524 },
525 [1] = {
526 .start = CH_SPI,
527 .end = CH_SPI,
528 .flags = IORESOURCE_IRQ,
529 },
530};
531
532static struct platform_device bfin_spi0_device = {
533 .name = "bfin-spi",
534 .id = 0, /* Bus number */
535 .num_resources = ARRAY_SIZE(bfin_spi0_resource),
536 .resource = bfin_spi0_resource,
520 .dev = { 537 .dev = {
521 .platform_data = &spi_bfin_master_info, /* Passed to driver */ 538 .platform_data = &bfin_spi0_info, /* Passed to driver */
522 }, 539 },
523}; 540};
524#endif /* spi master and devices */ 541#endif /* spi master and devices */
525 542
526#if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE) 543#if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE)
527static struct platform_device bfin_fb_device = { 544static struct platform_device bfin_fb_device = {
528 .name = "bf537-fb", 545 .name = "bf537-lq035",
546};
547#endif
548
549#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
550static struct platform_device bfin_fb_adv7393_device = {
551 .name = "bfin-adv7393",
529}; 552};
530#endif 553#endif
531 554
@@ -551,9 +574,24 @@ static struct platform_device bfin_uart_device = {
551#endif 574#endif
552 575
553#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) 576#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
577static struct resource bfin_twi0_resource[] = {
578 [0] = {
579 .start = TWI0_REGBASE,
580 .end = TWI0_REGBASE,
581 .flags = IORESOURCE_MEM,
582 },
583 [1] = {
584 .start = IRQ_TWI,
585 .end = IRQ_TWI,
586 .flags = IORESOURCE_IRQ,
587 },
588};
589
554static struct platform_device i2c_bfin_twi_device = { 590static struct platform_device i2c_bfin_twi_device = {
555 .name = "i2c-bfin-twi", 591 .name = "i2c-bfin-twi",
556 .id = 0, 592 .id = 0,
593 .num_resources = ARRAY_SIZE(bfin_twi0_resource),
594 .resource = bfin_twi0_resource,
557}; 595};
558#endif 596#endif
559 597
@@ -569,6 +607,43 @@ static struct platform_device bfin_sport1_uart_device = {
569}; 607};
570#endif 608#endif
571 609
610#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
611#define PATA_INT 55
612
613static struct pata_platform_info bfin_pata_platform_data = {
614 .ioport_shift = 1,
615 .irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED,
616};
617
618static struct resource bfin_pata_resources[] = {
619 {
620 .start = 0x20314020,
621 .end = 0x2031403F,
622 .flags = IORESOURCE_MEM,
623 },
624 {
625 .start = 0x2031401C,
626 .end = 0x2031401F,
627 .flags = IORESOURCE_MEM,
628 },
629 {
630 .start = PATA_INT,
631 .end = PATA_INT,
632 .flags = IORESOURCE_IRQ,
633 },
634};
635
636static struct platform_device bfin_pata_device = {
637 .name = "pata_platform",
638 .id = -1,
639 .num_resources = ARRAY_SIZE(bfin_pata_resources),
640 .resource = bfin_pata_resources,
641 .dev = {
642 .platform_data = &bfin_pata_platform_data,
643 }
644};
645#endif
646
572static struct platform_device *stamp_devices[] __initdata = { 647static struct platform_device *stamp_devices[] __initdata = {
573#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE) 648#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
574 &bfin_pcmcia_cf_device, 649 &bfin_pcmcia_cf_device,
@@ -603,13 +678,17 @@ static struct platform_device *stamp_devices[] __initdata = {
603#endif 678#endif
604 679
605#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) 680#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
606 &spi_bfin_master_device, 681 &bfin_spi0_device,
607#endif 682#endif
608 683
609#if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE) 684#if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE)
610 &bfin_fb_device, 685 &bfin_fb_device,
611#endif 686#endif
612 687
688#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
689 &bfin_fb_adv7393_device,
690#endif
691
613#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) 692#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
614 &bfin_uart_device, 693 &bfin_uart_device,
615#endif 694#endif
@@ -622,6 +701,10 @@ static struct platform_device *stamp_devices[] __initdata = {
622 &bfin_sport0_uart_device, 701 &bfin_sport0_uart_device,
623 &bfin_sport1_uart_device, 702 &bfin_sport1_uart_device,
624#endif 703#endif
704
705#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
706 &bfin_pata_device,
707#endif
625}; 708};
626 709
627static int __init stamp_init(void) 710static int __init stamp_init(void)
@@ -632,7 +715,18 @@ static int __init stamp_init(void)
632 spi_register_board_info(bfin_spi_board_info, 715 spi_register_board_info(bfin_spi_board_info,
633 ARRAY_SIZE(bfin_spi_board_info)); 716 ARRAY_SIZE(bfin_spi_board_info));
634#endif 717#endif
718
719#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
720 irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;
721#endif
635 return 0; 722 return 0;
636} 723}
637 724
638arch_initcall(stamp_init); 725arch_initcall(stamp_init);
726
727void native_machine_restart(char *cmd)
728{
729 /* workaround reboot hang when booting from SPI */
730 if ((bfin_read_SYSCR() & 0x7) == 0x3)
731 bfin_gpio_reset_spi0_ssel1();
732}
diff --git a/arch/blackfin/mach-bf548/boards/ezkit.c b/arch/blackfin/mach-bf548/boards/ezkit.c
index 96ad95fab1a8..2c47db494f7d 100644
--- a/arch/blackfin/mach-bf548/boards/ezkit.c
+++ b/arch/blackfin/mach-bf548/boards/ezkit.c
@@ -35,9 +35,16 @@
35#include <linux/spi/spi.h> 35#include <linux/spi/spi.h>
36#include <linux/spi/flash.h> 36#include <linux/spi/flash.h>
37#include <linux/irq.h> 37#include <linux/irq.h>
38#include <linux/irq.h>
39#include <linux/interrupt.h> 38#include <linux/interrupt.h>
39#include <linux/usb/musb.h>
40#include <asm/bfin5xx_spi.h> 40#include <asm/bfin5xx_spi.h>
41#include <asm/cplb.h>
42#include <asm/dma.h>
43#include <asm/gpio.h>
44#include <asm/nand.h>
45#include <asm/mach/bf54x_keys.h>
46#include <linux/input.h>
47#include <linux/spi/ad7877.h>
41 48
42/* 49/*
43 * Name the Board for the /proc/cpuinfo 50 * Name the Board for the /proc/cpuinfo
@@ -48,6 +55,88 @@ char *bfin_board_name = "ADSP-BF548-EZKIT";
48 * Driver needs to know address, irq and flag pin. 55 * Driver needs to know address, irq and flag pin.
49 */ 56 */
50 57
58#if defined(CONFIG_FB_BF54X_LQ043) || defined(CONFIG_FB_BF54X_LQ043_MODULE)
59
60#include <asm/mach/bf54x-lq043.h>
61
62static struct bfin_bf54xfb_mach_info bf54x_lq043_data = {
63 .width = 480,
64 .height = 272,
65 .xres = {480, 480, 480},
66 .yres = {272, 272, 272},
67 .bpp = {24, 24, 24},
68 .disp = GPIO_PE3,
69};
70
71static struct resource bf54x_lq043_resources[] = {
72 {
73 .start = IRQ_EPPI0_ERR,
74 .end = IRQ_EPPI0_ERR,
75 .flags = IORESOURCE_IRQ,
76 },
77};
78
79static struct platform_device bf54x_lq043_device = {
80 .name = "bf54x-lq043",
81 .id = -1,
82 .num_resources = ARRAY_SIZE(bf54x_lq043_resources),
83 .resource = bf54x_lq043_resources,
84 .dev = {
85 .platform_data = &bf54x_lq043_data,
86 },
87};
88#endif
89
90#if defined(CONFIG_KEYBOARD_BFIN) || defined(CONFIG_KEYBOARD_BFIN_MODULE)
91static int bf548_keymap[] = {
92 KEYVAL(0, 0, KEY_ENTER),
93 KEYVAL(0, 1, KEY_HELP),
94 KEYVAL(0, 2, KEY_0),
95 KEYVAL(0, 3, KEY_BACKSPACE),
96 KEYVAL(1, 0, KEY_TAB),
97 KEYVAL(1, 1, KEY_9),
98 KEYVAL(1, 2, KEY_8),
99 KEYVAL(1, 3, KEY_7),
100 KEYVAL(2, 0, KEY_DOWN),
101 KEYVAL(2, 1, KEY_6),
102 KEYVAL(2, 2, KEY_5),
103 KEYVAL(2, 3, KEY_4),
104 KEYVAL(3, 0, KEY_UP),
105 KEYVAL(3, 1, KEY_3),
106 KEYVAL(3, 2, KEY_2),
107 KEYVAL(3, 3, KEY_1),
108};
109
110static struct bfin_kpad_platform_data bf54x_kpad_data = {
111 .rows = 4,
112 .cols = 4,
113 .keymap = bf548_keymap,
114 .keymapsize = ARRAY_SIZE(bf548_keymap),
115 .repeat = 0,
116 .debounce_time = 5000, /* ns (5ms) */
117 .coldrive_time = 1000, /* ns (1ms) */
118 .keyup_test_interval = 50, /* ms (50ms) */
119};
120
121static struct resource bf54x_kpad_resources[] = {
122 {
123 .start = IRQ_KEY,
124 .end = IRQ_KEY,
125 .flags = IORESOURCE_IRQ,
126 },
127};
128
129static struct platform_device bf54x_kpad_device = {
130 .name = "bf54x-keys",
131 .id = -1,
132 .num_resources = ARRAY_SIZE(bf54x_kpad_resources),
133 .resource = bf54x_kpad_resources,
134 .dev = {
135 .platform_data = &bf54x_kpad_data,
136 },
137};
138#endif
139
51#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) 140#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
52static struct platform_device rtc_device = { 141static struct platform_device rtc_device = {
53 .name = "rtc-bfin", 142 .name = "rtc-bfin",
@@ -94,6 +183,344 @@ static struct platform_device bfin_uart_device = {
94}; 183};
95#endif 184#endif
96 185
186#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
187static struct resource smsc911x_resources[] = {
188 {
189 .name = "smsc911x-memory",
190 .start = 0x24000000,
191 .end = 0x24000000 + 0xFF,
192 .flags = IORESOURCE_MEM,
193 },
194 {
195 .start = IRQ_PE8,
196 .end = IRQ_PE8,
197 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
198 },
199};
200static struct platform_device smsc911x_device = {
201 .name = "smsc911x",
202 .id = 0,
203 .num_resources = ARRAY_SIZE(smsc911x_resources),
204 .resource = smsc911x_resources,
205};
206#endif
207
208#if defined(CONFIG_USB_BF54x_HCD) || defined(CONFIG_USB_BF54x_HCD_MODULE)
209static struct resource bf54x_hcd_resources[] = {
210 {
211 .start = 0xFFC03C00,
212 .end = 0xFFC040FF,
213 .flags = IORESOURCE_MEM,
214 },
215};
216
217static struct platform_device bf54x_hcd = {
218 .name = "bf54x-hcd",
219 .id = 0,
220 .num_resources = ARRAY_SIZE(bf54x_hcd_resources),
221 .resource = bf54x_hcd_resources,
222};
223#endif
224
225#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
226static struct resource musb_resources[] = {
227 [0] = {
228 .start = 0xFFC03C00,
229 .end = 0xFFC040FF,
230 .flags = IORESOURCE_MEM,
231 },
232 [1] = { /* general IRQ */
233 .start = IRQ_USB_INT0,
234 .end = IRQ_USB_INT0,
235 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
236 },
237 [2] = { /* DMA IRQ */
238 .start = IRQ_USB_DMA,
239 .end = IRQ_USB_DMA,
240 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
241 },
242};
243
244static struct musb_hdrc_platform_data musb_plat = {
245#ifdef CONFIG_USB_MUSB_OTG
246 .mode = MUSB_OTG,
247#elif CONFIG_USB_MUSB_HDRC_HCD
248 .mode = MUSB_HOST,
249#elif CONFIG_USB_GADGET_MUSB_HDRC
250 .mode = MUSB_PERIPHERAL,
251#endif
252 .multipoint = 1,
253};
254
255static u64 musb_dmamask = ~(u32)0;
256
257static struct platform_device musb_device = {
258 .name = "musb_hdrc",
259 .id = 0,
260 .dev = {
261 .dma_mask = &musb_dmamask,
262 .coherent_dma_mask = 0xffffffff,
263 .platform_data = &musb_plat,
264 },
265 .num_resources = ARRAY_SIZE(musb_resources),
266 .resource = musb_resources,
267};
268#endif
269
270#if defined(CONFIG_PATA_BF54X) || defined(CONFIG_PATA_BF54X_MODULE)
271static struct resource bfin_atapi_resources[] = {
272 {
273 .start = 0xFFC03800,
274 .end = 0xFFC0386F,
275 .flags = IORESOURCE_MEM,
276 },
277 {
278 .start = IRQ_ATAPI_ERR,
279 .end = IRQ_ATAPI_ERR,
280 .flags = IORESOURCE_IRQ,
281 },
282};
283
284static struct platform_device bfin_atapi_device = {
285 .name = "pata-bf54x",
286 .id = -1,
287 .num_resources = ARRAY_SIZE(bfin_atapi_resources),
288 .resource = bfin_atapi_resources,
289};
290#endif
291
292#if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE)
293static struct mtd_partition partition_info[] = {
294 {
295 .name = "Linux Kernel",
296 .offset = 0,
297 .size = 4 * SIZE_1M,
298 },
299 {
300 .name = "File System",
301 .offset = 4 * SIZE_1M,
302 .size = (256 - 4) * SIZE_1M,
303 },
304};
305
306static struct bf5xx_nand_platform bf5xx_nand_platform = {
307 .page_size = NFC_PG_SIZE_256,
308 .data_width = NFC_NWIDTH_8,
309 .partitions = partition_info,
310 .nr_partitions = ARRAY_SIZE(partition_info),
311 .rd_dly = 3,
312 .wr_dly = 3,
313};
314
315static struct resource bf5xx_nand_resources[] = {
316 {
317 .start = 0xFFC03B00,
318 .end = 0xFFC03B4F,
319 .flags = IORESOURCE_MEM,
320 },
321 {
322 .start = CH_NFC,
323 .end = CH_NFC,
324 .flags = IORESOURCE_IRQ,
325 },
326};
327
328static struct platform_device bf5xx_nand_device = {
329 .name = "bf5xx-nand",
330 .id = 0,
331 .num_resources = ARRAY_SIZE(bf5xx_nand_resources),
332 .resource = bf5xx_nand_resources,
333 .dev = {
334 .platform_data = &bf5xx_nand_platform,
335 },
336};
337#endif
338
339#if defined(CONFIG_SDH_BFIN) || defined(CONFIG_SDH_BFIN)
340static struct platform_device bf54x_sdh_device = {
341 .name = "bfin-sdh",
342 .id = 0,
343};
344#endif
345
346#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
347/* all SPI peripherals info goes here */
348#if defined(CONFIG_MTD_M25P80) \
349 || defined(CONFIG_MTD_M25P80_MODULE)
350/* SPI flash chip (m25p16) */
351static struct mtd_partition bfin_spi_flash_partitions[] = {
352 {
353 .name = "bootloader",
354 .size = 0x00040000,
355 .offset = 0,
356 .mask_flags = MTD_CAP_ROM
357 }, {
358 .name = "linux kernel",
359 .size = 0x1c0000,
360 .offset = 0x40000
361 }
362};
363
364static struct flash_platform_data bfin_spi_flash_data = {
365 .name = "m25p80",
366 .parts = bfin_spi_flash_partitions,
367 .nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
368 .type = "m25p16",
369};
370
371static struct bfin5xx_spi_chip spi_flash_chip_info = {
372 .enable_dma = 0, /* use dma transfer with this chip*/
373 .bits_per_word = 8,
374 .cs_change_per_word = 0,
375};
376#endif
377
378#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
379static struct bfin5xx_spi_chip spi_ad7877_chip_info = {
380 .cs_change_per_word = 1,
381 .enable_dma = 0,
382 .bits_per_word = 16,
383};
384
385static const struct ad7877_platform_data bfin_ad7877_ts_info = {
386 .model = 7877,
387 .vref_delay_usecs = 50, /* internal, no capacitor */
388 .x_plate_ohms = 419,
389 .y_plate_ohms = 486,
390 .pressure_max = 1000,
391 .pressure_min = 0,
392 .stopacq_polarity = 1,
393 .first_conversion_delay = 3,
394 .acquisition_time = 1,
395 .averaging = 1,
396 .pen_down_acc_interval = 1,
397};
398#endif
399
400static struct spi_board_info bf54x_spi_board_info[] __initdata = {
401#if defined(CONFIG_MTD_M25P80) \
402 || defined(CONFIG_MTD_M25P80_MODULE)
403 {
404 /* the modalias must be the same as spi device driver name */
405 .modalias = "m25p80", /* Name of spi_driver for this device */
406 .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
407 .bus_num = 0, /* Framework bus number */
408 .chip_select = 1, /* SPI_SSEL1*/
409 .platform_data = &bfin_spi_flash_data,
410 .controller_data = &spi_flash_chip_info,
411 .mode = SPI_MODE_3,
412 },
413#endif
414#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
415{
416 .modalias = "ad7877",
417 .platform_data = &bfin_ad7877_ts_info,
418 .irq = IRQ_PJ11,
419 .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */
420 .bus_num = 0,
421 .chip_select = 2,
422 .controller_data = &spi_ad7877_chip_info,
423},
424#endif
425};
426
427/* SPI (0) */
428static struct resource bfin_spi0_resource[] = {
429 [0] = {
430 .start = SPI0_REGBASE,
431 .end = SPI0_REGBASE + 0xFF,
432 .flags = IORESOURCE_MEM,
433 },
434 [1] = {
435 .start = CH_SPI0,
436 .end = CH_SPI0,
437 .flags = IORESOURCE_IRQ,
438 }
439};
440
441/* SPI (1) */
442static struct resource bfin_spi1_resource[] = {
443 [0] = {
444 .start = SPI1_REGBASE,
445 .end = SPI1_REGBASE + 0xFF,
446 .flags = IORESOURCE_MEM,
447 },
448 [1] = {
449 .start = CH_SPI1,
450 .end = CH_SPI1,
451 .flags = IORESOURCE_IRQ,
452 }
453};
454
455/* SPI controller data */
456static struct bfin5xx_spi_master bf54x_spi_master_info = {
457 .num_chipselect = 8,
458 .enable_dma = 1, /* master has the ability to do dma transfer */
459};
460
461static struct platform_device bf54x_spi_master0 = {
462 .name = "bfin-spi",
463 .id = 0, /* Bus number */
464 .num_resources = ARRAY_SIZE(bfin_spi0_resource),
465 .resource = bfin_spi0_resource,
466 .dev = {
467 .platform_data = &bf54x_spi_master_info, /* Passed to driver */
468 },
469};
470
471static struct platform_device bf54x_spi_master1 = {
472 .name = "bfin-spi",
473 .id = 1, /* Bus number */
474 .num_resources = ARRAY_SIZE(bfin_spi1_resource),
475 .resource = bfin_spi1_resource,
476 .dev = {
477 .platform_data = &bf54x_spi_master_info, /* Passed to driver */
478 },
479};
480#endif /* spi master and devices */
481
482#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
483static struct resource bfin_twi0_resource[] = {
484 [0] = {
485 .start = TWI0_REGBASE,
486 .end = TWI0_REGBASE + 0xFF,
487 .flags = IORESOURCE_MEM,
488 },
489 [1] = {
490 .start = IRQ_TWI0,
491 .end = IRQ_TWI0,
492 .flags = IORESOURCE_IRQ,
493 },
494};
495
496static struct platform_device i2c_bfin_twi0_device = {
497 .name = "i2c-bfin-twi",
498 .id = 0,
499 .num_resources = ARRAY_SIZE(bfin_twi0_resource),
500 .resource = bfin_twi0_resource,
501};
502
503static struct resource bfin_twi1_resource[] = {
504 [0] = {
505 .start = TWI1_REGBASE,
506 .end = TWI1_REGBASE + 0xFF,
507 .flags = IORESOURCE_MEM,
508 },
509 [1] = {
510 .start = IRQ_TWI1,
511 .end = IRQ_TWI1,
512 .flags = IORESOURCE_IRQ,
513 },
514};
515
516static struct platform_device i2c_bfin_twi1_device = {
517 .name = "i2c-bfin-twi",
518 .id = 1,
519 .num_resources = ARRAY_SIZE(bfin_twi1_resource),
520 .resource = bfin_twi1_resource,
521};
522#endif
523
97static struct platform_device *ezkit_devices[] __initdata = { 524static struct platform_device *ezkit_devices[] __initdata = {
98#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) 525#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
99 &rtc_device, 526 &rtc_device,
@@ -102,12 +529,60 @@ static struct platform_device *ezkit_devices[] __initdata = {
102#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) 529#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
103 &bfin_uart_device, 530 &bfin_uart_device,
104#endif 531#endif
532
533#if defined(CONFIG_FB_BF54X_LQ043) || defined(CONFIG_FB_BF54X_LQ043_MODULE)
534 &bf54x_lq043_device,
535#endif
536
537#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
538 &smsc911x_device,
539#endif
540
541#if defined(CONFIG_USB_BF54x_HCD) || defined(CONFIG_USB_BF54x_HCD_MODULE)
542 &bf54x_hcd,
543#endif
544
545#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
546 &musb_device,
547#endif
548
549#if defined(CONFIG_PATA_BF54X) || defined(CONFIG_PATA_BF54X_MODULE)
550 &bfin_atapi_device,
551#endif
552
553#if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE)
554 &bf5xx_nand_device,
555#endif
556
557#if defined(CONFIG_SDH_BFIN) || defined(CONFIG_SDH_BFIN)
558 &bf54x_sdh_device,
559#endif
560
561#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
562 &bf54x_spi_master0,
563/* &bf54x_spi_master1,*/
564#endif
565
566#if defined(CONFIG_KEYBOARD_BFIN) || defined(CONFIG_KEYBOARD_BFIN_MODULE)
567 &bf54x_kpad_device,
568#endif
569
570#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
571 &i2c_bfin_twi0_device,
572 &i2c_bfin_twi1_device,
573#endif
105}; 574};
106 575
107static int __init stamp_init(void) 576static int __init stamp_init(void)
108{ 577{
109 printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__); 578 printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__);
110 platform_add_devices(ezkit_devices, ARRAY_SIZE(ezkit_devices)); 579 platform_add_devices(ezkit_devices, ARRAY_SIZE(ezkit_devices));
580
581#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
582 spi_register_board_info(bf54x_spi_board_info,
583 ARRAY_SIZE(bf54x_spi_board_info));
584#endif
585
111 return 0; 586 return 0;
112} 587}
113 588
diff --git a/arch/blackfin/mach-bf561/boards/cm_bf561.c b/arch/blackfin/mach-bf561/boards/cm_bf561.c
index 5b2b544529a1..cd827a1b6ba1 100644
--- a/arch/blackfin/mach-bf561/boards/cm_bf561.c
+++ b/arch/blackfin/mach-bf561/boards/cm_bf561.c
@@ -34,7 +34,9 @@
34#include <linux/spi/spi.h> 34#include <linux/spi/spi.h>
35#include <linux/spi/flash.h> 35#include <linux/spi/flash.h>
36#include <linux/usb_isp1362.h> 36#include <linux/usb_isp1362.h>
37#include <linux/pata_platform.h>
37#include <linux/irq.h> 38#include <linux/irq.h>
39#include <asm/dma.h>
38#include <asm/bfin5xx_spi.h> 40#include <asm/bfin5xx_spi.h>
39 41
40/* 42/*
@@ -112,7 +114,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
112 /* the modalias must be the same as spi device driver name */ 114 /* the modalias must be the same as spi device driver name */
113 .modalias = "m25p80", /* Name of spi_driver for this device */ 115 .modalias = "m25p80", /* Name of spi_driver for this device */
114 .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ 116 .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
115 .bus_num = 1, /* Framework bus number */ 117 .bus_num = 0, /* Framework bus number */
116 .chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/ 118 .chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/
117 .platform_data = &bfin_spi_flash_data, 119 .platform_data = &bfin_spi_flash_data,
118 .controller_data = &spi_flash_chip_info, 120 .controller_data = &spi_flash_chip_info,
@@ -124,7 +126,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
124 { 126 {
125 .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */ 127 .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
126 .max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */ 128 .max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */
127 .bus_num = 1, /* Framework bus number */ 129 .bus_num = 0, /* Framework bus number */
128 .chip_select = 1, /* Framework chip select. */ 130 .chip_select = 1, /* Framework chip select. */
129 .platform_data = NULL, /* No spi_driver specific config */ 131 .platform_data = NULL, /* No spi_driver specific config */
130 .controller_data = &spi_adc_chip_info, 132 .controller_data = &spi_adc_chip_info,
@@ -135,7 +137,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
135 { 137 {
136 .modalias = "ad1836-spi", 138 .modalias = "ad1836-spi",
137 .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ 139 .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
138 .bus_num = 1, 140 .bus_num = 0,
139 .chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT, 141 .chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT,
140 .controller_data = &ad1836_spi_chip_info, 142 .controller_data = &ad1836_spi_chip_info,
141 }, 143 },
@@ -144,7 +146,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
144 { 146 {
145 .modalias = "ad9960-spi", 147 .modalias = "ad9960-spi",
146 .max_speed_hz = 10000000, /* max spi clock (SCK) speed in HZ */ 148 .max_speed_hz = 10000000, /* max spi clock (SCK) speed in HZ */
147 .bus_num = 1, 149 .bus_num = 0,
148 .chip_select = 1, 150 .chip_select = 1,
149 .controller_data = &ad9960_spi_chip_info, 151 .controller_data = &ad9960_spi_chip_info,
150 }, 152 },
@@ -153,7 +155,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
153 { 155 {
154 .modalias = "spi_mmc", 156 .modalias = "spi_mmc",
155 .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ 157 .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
156 .bus_num = 1, 158 .bus_num = 0,
157 .chip_select = CONFIG_SPI_MMC_CS_CHAN, 159 .chip_select = CONFIG_SPI_MMC_CS_CHAN,
158 .platform_data = NULL, 160 .platform_data = NULL,
159 .controller_data = &spi_mmc_chip_info, 161 .controller_data = &spi_mmc_chip_info,
@@ -162,17 +164,33 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
162#endif 164#endif
163}; 165};
164 166
167/* SPI (0) */
168static struct resource bfin_spi0_resource[] = {
169 [0] = {
170 .start = SPI0_REGBASE,
171 .end = SPI0_REGBASE + 0xFF,
172 .flags = IORESOURCE_MEM,
173 },
174 [1] = {
175 .start = CH_SPI,
176 .end = CH_SPI,
177 .flags = IORESOURCE_IRQ,
178 }
179};
180
165/* SPI controller data */ 181/* SPI controller data */
166static struct bfin5xx_spi_master spi_bfin_master_info = { 182static struct bfin5xx_spi_master bfin_spi0_info = {
167 .num_chipselect = 8, 183 .num_chipselect = 8,
168 .enable_dma = 1, /* master has the ability to do dma transfer */ 184 .enable_dma = 1, /* master has the ability to do dma transfer */
169}; 185};
170 186
171static struct platform_device spi_bfin_master_device = { 187static struct platform_device bfin_spi0_device = {
172 .name = "bfin-spi-master", 188 .name = "bfin-spi",
173 .id = 1, /* Bus number */ 189 .id = 0, /* Bus number */
190 .num_resources = ARRAY_SIZE(bfin_spi0_resource),
191 .resource = bfin_spi0_resource,
174 .dev = { 192 .dev = {
175 .platform_data = &spi_bfin_master_info, /* Passed to driver */ 193 .platform_data = &bfin_spi0_info, /* Passed to driver */
176 }, 194 },
177}; 195};
178#endif /* spi master and devices */ 196#endif /* spi master and devices */
@@ -256,6 +274,43 @@ static struct platform_device bfin_uart_device = {
256}; 274};
257#endif 275#endif
258 276
277#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
278#define PATA_INT 119
279
280static struct pata_platform_info bfin_pata_platform_data = {
281 .ioport_shift = 2,
282 .irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED,
283};
284
285static struct resource bfin_pata_resources[] = {
286 {
287 .start = 0x2400C000,
288 .end = 0x2400C001F,
289 .flags = IORESOURCE_MEM,
290 },
291 {
292 .start = 0x2400D018,
293 .end = 0x2400D01B,
294 .flags = IORESOURCE_MEM,
295 },
296 {
297 .start = PATA_INT,
298 .end = PATA_INT,
299 .flags = IORESOURCE_IRQ,
300 },
301};
302
303static struct platform_device bfin_pata_device = {
304 .name = "pata_platform",
305 .id = -1,
306 .num_resources = ARRAY_SIZE(bfin_pata_resources),
307 .resource = bfin_pata_resources,
308 .dev = {
309 .platform_data = &bfin_pata_platform_data,
310 }
311};
312#endif
313
259static struct platform_device *cm_bf561_devices[] __initdata = { 314static struct platform_device *cm_bf561_devices[] __initdata = {
260 315
261#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) 316#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
@@ -271,9 +326,12 @@ static struct platform_device *cm_bf561_devices[] __initdata = {
271#endif 326#endif
272 327
273#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) 328#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
274 &spi_bfin_master_device, 329 &bfin_spi0_device,
275#endif 330#endif
276 331
332#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
333 &bfin_pata_device,
334#endif
277}; 335};
278 336
279static int __init cm_bf561_init(void) 337static int __init cm_bf561_init(void)
@@ -283,6 +341,10 @@ static int __init cm_bf561_init(void)
283#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) 341#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
284 spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); 342 spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
285#endif 343#endif
344
345#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
346 irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;
347#endif
286 return 0; 348 return 0;
287} 349}
288 350
diff --git a/arch/blackfin/mach-bf561/boards/ezkit.c b/arch/blackfin/mach-bf561/boards/ezkit.c
index 724191da20a2..57e14edca8b1 100644
--- a/arch/blackfin/mach-bf561/boards/ezkit.c
+++ b/arch/blackfin/mach-bf561/boards/ezkit.c
@@ -32,6 +32,8 @@
32#include <linux/spi/spi.h> 32#include <linux/spi/spi.h>
33#include <linux/irq.h> 33#include <linux/irq.h>
34#include <linux/interrupt.h> 34#include <linux/interrupt.h>
35#include <linux/pata_platform.h>
36#include <asm/dma.h>
35#include <asm/bfin5xx_spi.h> 37#include <asm/bfin5xx_spi.h>
36 38
37/* 39/*
@@ -140,17 +142,33 @@ static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
140#endif 142#endif
141#endif 143#endif
142 144
145/* SPI (0) */
146static struct resource bfin_spi0_resource[] = {
147 [0] = {
148 .start = SPI0_REGBASE,
149 .end = SPI0_REGBASE + 0xFF,
150 .flags = IORESOURCE_MEM,
151 },
152 [1] = {
153 .start = CH_SPI,
154 .end = CH_SPI,
155 .flags = IORESOURCE_IRQ,
156 }
157};
158
143/* SPI controller data */ 159/* SPI controller data */
144static struct bfin5xx_spi_master spi_bfin_master_info = { 160static struct bfin5xx_spi_master bfin_spi0_info = {
145 .num_chipselect = 8, 161 .num_chipselect = 8,
146 .enable_dma = 1, /* master has the ability to do dma transfer */ 162 .enable_dma = 1, /* master has the ability to do dma transfer */
147}; 163};
148 164
149static struct platform_device spi_bfin_master_device = { 165static struct platform_device bfin_spi0_device = {
150 .name = "bfin-spi-master", 166 .name = "bfin-spi",
151 .id = 1, /* Bus number */ 167 .id = 0, /* Bus number */
168 .num_resources = ARRAY_SIZE(bfin_spi0_resource),
169 .resource = bfin_spi0_resource,
152 .dev = { 170 .dev = {
153 .platform_data = &spi_bfin_master_info, /* Passed to driver */ 171 .platform_data = &bfin_spi0_info, /* Passed to driver */
154 }, 172 },
155}; 173};
156 174
@@ -160,23 +178,63 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
160 { 178 {
161 .modalias = "ad1836-spi", 179 .modalias = "ad1836-spi",
162 .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ 180 .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
163 .bus_num = 1, 181 .bus_num = 0,
164 .chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT, 182 .chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT,
165 .controller_data = &ad1836_spi_chip_info, 183 .controller_data = &ad1836_spi_chip_info,
166 }, 184 },
167#endif 185#endif
168}; 186};
169 187
188#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
189#define PATA_INT 55
190
191static struct pata_platform_info bfin_pata_platform_data = {
192 .ioport_shift = 1,
193 .irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED,
194};
195
196static struct resource bfin_pata_resources[] = {
197 {
198 .start = 0x20314020,
199 .end = 0x2031403F,
200 .flags = IORESOURCE_MEM,
201 },
202 {
203 .start = 0x2031401C,
204 .end = 0x2031401F,
205 .flags = IORESOURCE_MEM,
206 },
207 {
208 .start = PATA_INT,
209 .end = PATA_INT,
210 .flags = IORESOURCE_IRQ,
211 },
212};
213
214static struct platform_device bfin_pata_device = {
215 .name = "pata_platform",
216 .id = -1,
217 .num_resources = ARRAY_SIZE(bfin_pata_resources),
218 .resource = bfin_pata_resources,
219 .dev = {
220 .platform_data = &bfin_pata_platform_data,
221 }
222};
223#endif
224
170static struct platform_device *ezkit_devices[] __initdata = { 225static struct platform_device *ezkit_devices[] __initdata = {
171#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) 226#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
172 &smc91x_device, 227 &smc91x_device,
173#endif 228#endif
174#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) 229#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
175 &spi_bfin_master_device, 230 &bfin_spi0_device,
176#endif 231#endif
177#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) 232#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
178 &bfin_uart_device, 233 &bfin_uart_device,
179#endif 234#endif
235#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
236 &bfin_pata_device,
237#endif
180}; 238};
181 239
182static int __init ezkit_init(void) 240static int __init ezkit_init(void)
@@ -194,7 +252,15 @@ static int __init ezkit_init(void)
194 SSYNC(); 252 SSYNC();
195#endif 253#endif
196 254
197 return spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); 255#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
256 spi_register_board_info(bfin_spi_board_info,
257 ARRAY_SIZE(bfin_spi_board_info));
258#endif
259
260#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
261 irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;
262#endif
263 return 0;
198} 264}
199 265
200arch_initcall(ezkit_init); 266arch_initcall(ezkit_init);
generated by cgit v1.2.2 (git 2.25.0) at 2024-12-13 23:34:06 -0500