3 files changed, 182 insertions, 0 deletions

diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index cced4d108319..81450fbd8b12 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -241,6 +241,12 @@ config RTC_DRV_M41T80_WDT
           If you say Y here you will get support for the
           watchdog timer in the ST M41T60 and M41T80 RTC chips series.
 
+config RTC_DRV_DM355EVM
+        tristate "TI DaVinci DM355 EVM RTC"
+        depends on MFD_DM355EVM_MSP
+        help
+          Supports the RTC firmware in the MSP430 on the DM355 EVM.
+
 config RTC_DRV_TWL92330
         boolean "TI TWL92330/Menelaus"
         depends on MENELAUS
diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile
index 6e28021abb9d..0e697aa51caa 100644
--- a/drivers/rtc/Makefile
+++ b/drivers/rtc/Makefile
@@ -23,6 +23,7 @@ obj-$(CONFIG_RTC_DRV_AT91SAM9)	+= rtc-at91sam9.o
 obj-$(CONFIG_RTC_DRV_AU1XXX)    += rtc-au1xxx.o
 obj-$(CONFIG_RTC_DRV_BFIN)      += rtc-bfin.o
 obj-$(CONFIG_RTC_DRV_CMOS)      += rtc-cmos.o
+obj-$(CONFIG_RTC_DRV_DM355EVM)  += rtc-dm355evm.o
 obj-$(CONFIG_RTC_DRV_DS1216)    += rtc-ds1216.o
 obj-$(CONFIG_RTC_DRV_DS1286)    += rtc-ds1286.o
 obj-$(CONFIG_RTC_DRV_DS1302)    += rtc-ds1302.o
diff --git a/drivers/rtc/rtc-dm355evm.c b/drivers/rtc/rtc-dm355evm.c
new file mode 100644
index 000000000000..58d4e18530da
--- /dev/null
+++ b/drivers/rtc/rtc-dm355evm.c
@@ -0,0 +1,175 @@
+/*
+ * rtc-dm355evm.c - access battery-backed counter in MSP430 firmware
+ *
+ * Copyright (c) 2008 by David Brownell
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/rtc.h>
+#include <linux/platform_device.h>
+
+#include <linux/i2c/dm355evm_msp.h>
+
+
+/*
+ * The MSP430 firmware on the DM355 EVM uses a watch crystal to feed
+ * a 1 Hz counter.  When a backup battery is supplied, that makes a
+ * reasonable RTC for applications where alarms and non-NTP drift
+ * compensation aren't important.
+ *
+ * The only real glitch is the inability to read or write all four
+ * counter bytes atomically:  the count may increment in the middle
+ * of an operation, causing trouble when the LSB rolls over.
+ *
+ * This driver was tested with firmware revision A4.
+ */
+union evm_time {
+        u8      bytes[4];
+        u32     value;
+};
+
+static int dm355evm_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+        union evm_time  time;
+        int             status;
+        int             tries = 0;
+
+        do {
+                /*
+                 * Read LSB(0) to MSB(3) bytes.  Defend against the counter
+                 * rolling over by re-reading until the value is stable,
+                 * and assuming the four reads take at most a few seconds.
+                 */
+                status = dm355evm_msp_read(DM355EVM_MSP_RTC_0);
+                if (status < 0)
+                        return status;
+                if (tries && time.bytes[0] == status)
+                        break;
+                time.bytes[0] = status;
+
+                status = dm355evm_msp_read(DM355EVM_MSP_RTC_1);
+                if (status < 0)
+                        return status;
+                if (tries && time.bytes[1] == status)
+                        break;
+                time.bytes[1] = status;
+
+                status = dm355evm_msp_read(DM355EVM_MSP_RTC_2);
+                if (status < 0)
+                        return status;
+                if (tries && time.bytes[2] == status)
+                        break;
+                time.bytes[2] = status;
+
+                status = dm355evm_msp_read(DM355EVM_MSP_RTC_3);
+                if (status < 0)
+                        return status;
+                if (tries && time.bytes[3] == status)
+                        break;
+                time.bytes[3] = status;
+
+        } while (++tries < 5);
+
+        dev_dbg(dev, "read timestamp %08x\n", time.value);
+
+        rtc_time_to_tm(le32_to_cpu(time.value), tm);
+        return 0;
+}
+
+static int dm355evm_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+        union evm_time  time;
+        unsigned long   value;
+        int             status;
+
+        rtc_tm_to_time(tm, &value);
+        time.value = cpu_to_le32(value);
+
+        dev_dbg(dev, "write timestamp %08x\n", time.value);
+
+        /*
+         * REVISIT handle non-atomic writes ... maybe just retry until
+         * byte[1] sticks (no rollover)?
+         */
+        status = dm355evm_msp_write(time.bytes[0], DM355EVM_MSP_RTC_0);
+        if (status < 0)
+                return status;
+
+        status = dm355evm_msp_write(time.bytes[1], DM355EVM_MSP_RTC_1);
+        if (status < 0)
+                return status;
+
+        status = dm355evm_msp_write(time.bytes[2], DM355EVM_MSP_RTC_2);
+        if (status < 0)
+                return status;
+
+        status = dm355evm_msp_write(time.bytes[3], DM355EVM_MSP_RTC_3);
+        if (status < 0)
+                return status;
+
+        return 0;
+}
+
+static struct rtc_class_ops dm355evm_rtc_ops = {
+        .read_time      = dm355evm_rtc_read_time,
+        .set_time       = dm355evm_rtc_set_time,
+};
+
+/*----------------------------------------------------------------------*/
+
+static int __devinit dm355evm_rtc_probe(struct platform_device *pdev)
+{
+        struct rtc_device *rtc;
+
+        rtc = rtc_device_register(pdev->name,
+                                  &pdev->dev, &dm355evm_rtc_ops, THIS_MODULE);
+        if (IS_ERR(rtc)) {
+                dev_err(&pdev->dev, "can't register RTC device, err %ld\n",
+                        PTR_ERR(rtc));
+                return PTR_ERR(rtc);
+        }
+        platform_set_drvdata(pdev, rtc);
+
+        return 0;
+}
+
+static int __devexit dm355evm_rtc_remove(struct platform_device *pdev)
+{
+        struct rtc_device *rtc = platform_get_drvdata(pdev);
+
+        rtc_device_unregister(rtc);
+        platform_set_drvdata(pdev, NULL);
+        return 0;
+}
+
+/*
+ * I2C is used to talk to the MSP430, but this platform device is
+ * exposed by an MFD driver that manages I2C communications.
+ */
+static struct platform_driver rtc_dm355evm_driver = {
+        .probe          = dm355evm_rtc_probe,
+        .remove         = __devexit_p(dm355evm_rtc_remove),
+        .driver         = {
+                .owner  = THIS_MODULE,
+                .name   = "rtc-dm355evm",
+        },
+};
+
+static int __init dm355evm_rtc_init(void)
+{
+        return platform_driver_register(&rtc_dm355evm_driver);
+}
+module_init(dm355evm_rtc_init);
+
+static void __exit dm355evm_rtc_exit(void)
+{
+        platform_driver_unregister(&rtc_dm355evm_driver);
+}
+module_exit(dm355evm_rtc_exit);
+
+MODULE_LICENSE("GPL");