diff options
-rw-r--r-- | drivers/usb/host/ehci-hcd.c | 5 | ||||
-rw-r--r-- | drivers/usb/host/ehci-orion.c | 272 |
2 files changed, 277 insertions, 0 deletions
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index fb2b227afc4f..7c5c8796d175 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c | |||
@@ -998,6 +998,11 @@ MODULE_LICENSE ("GPL"); | |||
998 | #define PLATFORM_DRIVER ehci_ppc_soc_driver | 998 | #define PLATFORM_DRIVER ehci_ppc_soc_driver |
999 | #endif | 999 | #endif |
1000 | 1000 | ||
1001 | #ifdef CONFIG_ARCH_ORION | ||
1002 | #include "ehci-orion.c" | ||
1003 | #define PLATFORM_DRIVER ehci_orion_driver | ||
1004 | #endif | ||
1005 | |||
1001 | #if !defined(PCI_DRIVER) && !defined(PLATFORM_DRIVER) && \ | 1006 | #if !defined(PCI_DRIVER) && !defined(PLATFORM_DRIVER) && \ |
1002 | !defined(PS3_SYSTEM_BUS_DRIVER) | 1007 | !defined(PS3_SYSTEM_BUS_DRIVER) |
1003 | #error "missing bus glue for ehci-hcd" | 1008 | #error "missing bus glue for ehci-hcd" |
diff --git a/drivers/usb/host/ehci-orion.c b/drivers/usb/host/ehci-orion.c new file mode 100644 index 000000000000..e129981f139f --- /dev/null +++ b/drivers/usb/host/ehci-orion.c | |||
@@ -0,0 +1,272 @@ | |||
1 | /* | ||
2 | * drivers/usb/host/ehci-orion.c | ||
3 | * | ||
4 | * Tzachi Perelstein <tzachi@marvell.com> | ||
5 | * | ||
6 | * This file is licensed under the terms of the GNU General Public | ||
7 | * License version 2. This program is licensed "as is" without any | ||
8 | * warranty of any kind, whether express or implied. | ||
9 | */ | ||
10 | |||
11 | #include <linux/kernel.h> | ||
12 | #include <linux/module.h> | ||
13 | #include <linux/platform_device.h> | ||
14 | #include <asm/arch/orion.h> | ||
15 | |||
16 | #define rdl(off) __raw_readl(hcd->regs + (off)) | ||
17 | #define wrl(off, val) __raw_writel((val), hcd->regs + (off)) | ||
18 | |||
19 | #define USB_CAUSE 0x310 | ||
20 | #define USB_MASK 0x314 | ||
21 | #define USB_CMD 0x140 | ||
22 | #define USB_MODE 0x1a8 | ||
23 | #define USB_IPG 0x360 | ||
24 | #define USB_PHY_PWR_CTRL 0x400 | ||
25 | #define USB_PHY_TX_CTRL 0x420 | ||
26 | #define USB_PHY_RX_CTRL 0x430 | ||
27 | #define USB_PHY_IVREF_CTRL 0x440 | ||
28 | #define USB_PHY_TST_GRP_CTRL 0x450 | ||
29 | |||
30 | /* | ||
31 | * Implement Orion USB controller specification guidelines | ||
32 | */ | ||
33 | static void orion_usb_setup(struct usb_hcd *hcd) | ||
34 | { | ||
35 | /* | ||
36 | * Clear interrupt cause and mask | ||
37 | */ | ||
38 | wrl(USB_CAUSE, 0); | ||
39 | wrl(USB_MASK, 0); | ||
40 | |||
41 | /* | ||
42 | * Reset controller | ||
43 | */ | ||
44 | wrl(USB_CMD, rdl(USB_CMD) | 0x2); | ||
45 | while (rdl(USB_CMD) & 0x2); | ||
46 | |||
47 | /* | ||
48 | * GL# USB-10: Set IPG for non start of frame packets | ||
49 | * Bits[14:8]=0xc | ||
50 | */ | ||
51 | wrl(USB_IPG, (rdl(USB_IPG) & ~0x7f00) | 0xc00); | ||
52 | |||
53 | /* | ||
54 | * GL# USB-9: USB 2.0 Power Control | ||
55 | * BG_VSEL[7:6]=0x1 | ||
56 | */ | ||
57 | wrl(USB_PHY_PWR_CTRL, (rdl(USB_PHY_PWR_CTRL) & ~0xc0)| 0x40); | ||
58 | |||
59 | /* | ||
60 | * GL# USB-1: USB PHY Tx Control - force calibration to '8' | ||
61 | * TXDATA_BLOCK_EN[21]=0x1, EXT_RCAL_EN[13]=0x1, IMP_CAL[6:3]=0x8 | ||
62 | */ | ||
63 | wrl(USB_PHY_TX_CTRL, (rdl(USB_PHY_TX_CTRL) & ~0x78) | 0x202040); | ||
64 | |||
65 | /* | ||
66 | * GL# USB-3 GL# USB-9: USB PHY Rx Control | ||
67 | * RXDATA_BLOCK_LENGHT[31:30]=0x3, EDGE_DET_SEL[27:26]=0, | ||
68 | * CDR_FASTLOCK_EN[21]=0, DISCON_THRESHOLD[9:8]=0, SQ_THRESH[7:4]=0x1 | ||
69 | */ | ||
70 | wrl(USB_PHY_RX_CTRL, (rdl(USB_PHY_RX_CTRL) & ~0xc2003f0) | 0xc0000010); | ||
71 | |||
72 | /* | ||
73 | * GL# USB-3 GL# USB-9: USB PHY IVREF Control | ||
74 | * PLLVDD12[1:0]=0x2, RXVDD[5:4]=0x3, Reserved[19]=0 | ||
75 | */ | ||
76 | wrl(USB_PHY_IVREF_CTRL, (rdl(USB_PHY_IVREF_CTRL) & ~0x80003 ) | 0x32); | ||
77 | |||
78 | /* | ||
79 | * GL# USB-3 GL# USB-9: USB PHY Test Group Control | ||
80 | * REG_FIFO_SQ_RST[15]=0 | ||
81 | */ | ||
82 | wrl(USB_PHY_TST_GRP_CTRL, rdl(USB_PHY_TST_GRP_CTRL) & ~0x8000); | ||
83 | |||
84 | /* | ||
85 | * Stop and reset controller | ||
86 | */ | ||
87 | wrl(USB_CMD, rdl(USB_CMD) & ~0x1); | ||
88 | wrl(USB_CMD, rdl(USB_CMD) | 0x2); | ||
89 | while (rdl(USB_CMD) & 0x2); | ||
90 | |||
91 | /* | ||
92 | * GL# USB-5 Streaming disable REG_USB_MODE[4]=1 | ||
93 | * TBD: This need to be done after each reset! | ||
94 | * GL# USB-4 Setup USB Host mode | ||
95 | */ | ||
96 | wrl(USB_MODE, 0x13); | ||
97 | } | ||
98 | |||
99 | static int ehci_orion_setup(struct usb_hcd *hcd) | ||
100 | { | ||
101 | struct ehci_hcd *ehci = hcd_to_ehci(hcd); | ||
102 | int retval; | ||
103 | |||
104 | retval = ehci_halt(ehci); | ||
105 | if (retval) | ||
106 | return retval; | ||
107 | |||
108 | /* | ||
109 | * data structure init | ||
110 | */ | ||
111 | retval = ehci_init(hcd); | ||
112 | if (retval) | ||
113 | return retval; | ||
114 | |||
115 | ehci_reset(ehci); | ||
116 | ehci_port_power(ehci, 0); | ||
117 | |||
118 | return retval; | ||
119 | } | ||
120 | |||
121 | static const struct hc_driver ehci_orion_hc_driver = { | ||
122 | .description = hcd_name, | ||
123 | .product_desc = "Marvell Orion EHCI", | ||
124 | .hcd_priv_size = sizeof(struct ehci_hcd), | ||
125 | |||
126 | /* | ||
127 | * generic hardware linkage | ||
128 | */ | ||
129 | .irq = ehci_irq, | ||
130 | .flags = HCD_MEMORY | HCD_USB2, | ||
131 | |||
132 | /* | ||
133 | * basic lifecycle operations | ||
134 | */ | ||
135 | .reset = ehci_orion_setup, | ||
136 | .start = ehci_run, | ||
137 | #ifdef CONFIG_PM | ||
138 | .suspend = ehci_bus_suspend, | ||
139 | .resume = ehci_bus_resume, | ||
140 | #endif | ||
141 | .stop = ehci_stop, | ||
142 | .shutdown = ehci_shutdown, | ||
143 | |||
144 | /* | ||
145 | * managing i/o requests and associated device resources | ||
146 | */ | ||
147 | .urb_enqueue = ehci_urb_enqueue, | ||
148 | .urb_dequeue = ehci_urb_dequeue, | ||
149 | .endpoint_disable = ehci_endpoint_disable, | ||
150 | |||
151 | /* | ||
152 | * scheduling support | ||
153 | */ | ||
154 | .get_frame_number = ehci_get_frame, | ||
155 | |||
156 | /* | ||
157 | * root hub support | ||
158 | */ | ||
159 | .hub_status_data = ehci_hub_status_data, | ||
160 | .hub_control = ehci_hub_control, | ||
161 | .bus_suspend = ehci_bus_suspend, | ||
162 | .bus_resume = ehci_bus_resume, | ||
163 | }; | ||
164 | |||
165 | static int __init ehci_orion_drv_probe(struct platform_device *pdev) | ||
166 | { | ||
167 | struct resource *res; | ||
168 | struct usb_hcd *hcd; | ||
169 | struct ehci_hcd *ehci; | ||
170 | void __iomem *regs; | ||
171 | int irq, err; | ||
172 | |||
173 | if (usb_disabled()) | ||
174 | return -ENODEV; | ||
175 | |||
176 | pr_debug("Initializing Orion-SoC USB Host Controller\n"); | ||
177 | |||
178 | irq = platform_get_irq(pdev, 0); | ||
179 | if (irq <= 0) { | ||
180 | dev_err(&pdev->dev, | ||
181 | "Found HC with no IRQ. Check %s setup!\n", | ||
182 | pdev->dev.bus_id); | ||
183 | err = -ENODEV; | ||
184 | goto err1; | ||
185 | } | ||
186 | |||
187 | res = platform_get_resource(pdev, IORESOURCE_MEM, 0); | ||
188 | if (!res) { | ||
189 | dev_err(&pdev->dev, | ||
190 | "Found HC with no register addr. Check %s setup!\n", | ||
191 | pdev->dev.bus_id); | ||
192 | err = -ENODEV; | ||
193 | goto err1; | ||
194 | } | ||
195 | |||
196 | if (!request_mem_region(res->start, res->end - res->start + 1, | ||
197 | ehci_orion_hc_driver.description)) { | ||
198 | dev_dbg(&pdev->dev, "controller already in use\n"); | ||
199 | err = -EBUSY; | ||
200 | goto err1; | ||
201 | } | ||
202 | |||
203 | regs = ioremap(res->start, res->end - res->start + 1); | ||
204 | if (regs == NULL) { | ||
205 | dev_dbg(&pdev->dev, "error mapping memory\n"); | ||
206 | err = -EFAULT; | ||
207 | goto err2; | ||
208 | } | ||
209 | |||
210 | hcd = usb_create_hcd(&ehci_orion_hc_driver, | ||
211 | &pdev->dev, pdev->dev.bus_id); | ||
212 | if (!hcd) { | ||
213 | err = -ENOMEM; | ||
214 | goto err3; | ||
215 | } | ||
216 | |||
217 | hcd->rsrc_start = res->start; | ||
218 | hcd->rsrc_len = res->end - res->start + 1; | ||
219 | hcd->regs = regs; | ||
220 | |||
221 | ehci = hcd_to_ehci(hcd); | ||
222 | ehci->caps = hcd->regs + 0x100; | ||
223 | ehci->regs = hcd->regs + 0x100 + | ||
224 | HC_LENGTH(ehci_readl(ehci, &ehci->caps->hc_capbase)); | ||
225 | ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params); | ||
226 | ehci->is_tdi_rh_tt = 1; | ||
227 | ehci->sbrn = 0x20; | ||
228 | |||
229 | /* | ||
230 | * setup Orion USB controller | ||
231 | */ | ||
232 | orion_usb_setup(hcd); | ||
233 | |||
234 | err = usb_add_hcd(hcd, irq, IRQF_SHARED | IRQF_DISABLED); | ||
235 | if (err) | ||
236 | goto err4; | ||
237 | |||
238 | return 0; | ||
239 | |||
240 | err4: | ||
241 | usb_put_hcd(hcd); | ||
242 | err3: | ||
243 | iounmap(regs); | ||
244 | err2: | ||
245 | release_mem_region(res->start, res->end - res->start + 1); | ||
246 | err1: | ||
247 | dev_err(&pdev->dev, "init %s fail, %d\n", | ||
248 | pdev->dev.bus_id, err); | ||
249 | |||
250 | return err; | ||
251 | } | ||
252 | |||
253 | static int __exit ehci_orion_drv_remove(struct platform_device *pdev) | ||
254 | { | ||
255 | struct usb_hcd *hcd = platform_get_drvdata(pdev); | ||
256 | |||
257 | usb_remove_hcd(hcd); | ||
258 | iounmap(hcd->regs); | ||
259 | release_mem_region(hcd->rsrc_start, hcd->rsrc_len); | ||
260 | usb_put_hcd(hcd); | ||
261 | |||
262 | return 0; | ||
263 | } | ||
264 | |||
265 | MODULE_ALIAS("platform:orion-ehci"); | ||
266 | |||
267 | static struct platform_driver ehci_orion_driver = { | ||
268 | .probe = ehci_orion_drv_probe, | ||
269 | .remove = __exit_p(ehci_orion_drv_remove), | ||
270 | .shutdown = usb_hcd_platform_shutdown, | ||
271 | .driver.name = "orion-ehci", | ||
272 | }; | ||