4 files changed, 20 insertions, 20 deletions

diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c
index 509178c3700c..196c09ff5e71 100644
--- a/drivers/scsi/libata-core.c
+++ b/drivers/scsi/libata-core.c
@@ -1465,7 +1465,7 @@ static int ata_bus_probe(struct ata_port *ap)
                 tries[dev->devno] = 0;
                 break;
         case -EIO:
-                ata_down_sata_spd_limit(ap);
+                sata_down_spd_limit(ap);
                 /* fall through */
         default:
                 tries[dev->devno]--;
@@ -1640,12 +1640,12 @@ void ata_port_disable(struct ata_port *ap)
 }
 
 /**
- *      ata_down_sata_spd_limit - adjust SATA spd limit downward
+ *      sata_down_spd_limit - adjust SATA spd limit downward
  *      @ap: Port to adjust SATA spd limit for
  *
  *      Adjust SATA spd limit of @ap downward.  Note that this
  *      function only adjusts the limit.  The change must be applied
- *      using ata_set_sata_spd().
+ *      using sata_set_spd().
  *
  *      LOCKING:
  *      Inherited from caller.
@@ -1653,7 +1653,7 @@ void ata_port_disable(struct ata_port *ap)
  *      RETURNS:
  *      0 on success, negative errno on failure
  */
-int ata_down_sata_spd_limit(struct ata_port *ap)
+int sata_down_spd_limit(struct ata_port *ap)
 {
         u32 spd, mask;
         int highbit;
@@ -1683,7 +1683,7 @@ int ata_down_sata_spd_limit(struct ata_port *ap)
         return 0;
 }
 
-static int __ata_set_sata_spd_needed(struct ata_port *ap, u32 *scontrol)
+static int __sata_set_spd_needed(struct ata_port *ap, u32 *scontrol)
 {
         u32 spd, limit;
 
@@ -1699,7 +1699,7 @@ static int __ata_set_sata_spd_needed(struct ata_port *ap, u32 *scontrol)
 }
 
 /**
- *      ata_set_sata_spd_needed - is SATA spd configuration needed
+ *      sata_set_spd_needed - is SATA spd configuration needed
  *      @ap: Port in question
  *
  *      Test whether the spd limit in SControl matches
@@ -1713,7 +1713,7 @@ static int __ata_set_sata_spd_needed(struct ata_port *ap, u32 *scontrol)
  *      RETURNS:
  *      1 if SATA spd configuration is needed, 0 otherwise.
  */
-int ata_set_sata_spd_needed(struct ata_port *ap)
+int sata_set_spd_needed(struct ata_port *ap)
 {
         u32 scontrol;
 
@@ -1722,11 +1722,11 @@ int ata_set_sata_spd_needed(struct ata_port *ap)
 
         scontrol = scr_read(ap, SCR_CONTROL);
 
-        return __ata_set_sata_spd_needed(ap, &scontrol);
+        return __sata_set_spd_needed(ap, &scontrol);
 }
 
 /**
- *      ata_set_sata_spd - set SATA spd according to spd limit
+ *      sata_set_spd - set SATA spd according to spd limit
  *      @ap: Port to set SATA spd for
  *
  *      Set SATA spd of @ap according to sata_spd_limit.
@@ -1738,7 +1738,7 @@ int ata_set_sata_spd_needed(struct ata_port *ap)
  *      0 if spd doesn't need to be changed, 1 if spd has been
  *      changed.  -EOPNOTSUPP if SCR registers are inaccessible.
  */
-int ata_set_sata_spd(struct ata_port *ap)
+int sata_set_spd(struct ata_port *ap)
 {
         u32 scontrol;
 
@@ -1746,7 +1746,7 @@ int ata_set_sata_spd(struct ata_port *ap)
                 return -EOPNOTSUPP;
 
         scontrol = scr_read(ap, SCR_CONTROL);
-        if (!__ata_set_sata_spd_needed(ap, &scontrol))
+        if (!__sata_set_spd_needed(ap, &scontrol))
                 return 0;
 
         scr_write(ap, SCR_CONTROL, scontrol);
@@ -2464,7 +2464,7 @@ int sata_std_hardreset(struct ata_port *ap, unsigned int *class)
 
         DPRINTK("ENTER\n");
 
-        if (ata_set_sata_spd_needed(ap)) {
+        if (sata_set_spd_needed(ap)) {
                 /* SATA spec says nothing about how to reconfigure
                  * spd.  To be on the safe side, turn off phy during
                  * reconfiguration.  This works for at least ICH7 AHCI
@@ -2474,7 +2474,7 @@ int sata_std_hardreset(struct ata_port *ap, unsigned int *class)
                 scontrol = (scontrol & 0x0f0) | 0x302;
                 scr_write_flush(ap, SCR_CONTROL, scontrol);
 
-                ata_set_sata_spd(ap);
+                sata_set_spd(ap);
         }
 
         /* issue phy wake/reset */
@@ -2657,7 +2657,7 @@ int ata_drive_probe_reset(struct ata_port *ap, ata_probeinit_fn_t probeinit,
         if (probeinit)
                 probeinit(ap);
 
-        if (softreset && !ata_set_sata_spd_needed(ap)) {
+        if (softreset && !sata_set_spd_needed(ap)) {
                 rc = ata_do_reset(ap, softreset, postreset, classes);
                 if (rc == 0 && classes[0] != ATA_DEV_UNKNOWN)
                         goto done;
@@ -2677,7 +2677,7 @@ int ata_drive_probe_reset(struct ata_port *ap, ata_probeinit_fn_t probeinit,
                         break;
                 }
 
-                if (ata_down_sata_spd_limit(ap))
+                if (sata_down_spd_limit(ap))
                         goto done;
 
                 printk(KERN_INFO "ata%u: hardreset failed, will retry "
@@ -5113,7 +5113,7 @@ EXPORT_SYMBOL_GPL(ata_bmdma_irq_clear);
 EXPORT_SYMBOL_GPL(ata_bmdma_status);
 EXPORT_SYMBOL_GPL(ata_bmdma_stop);
 EXPORT_SYMBOL_GPL(ata_port_probe);
-EXPORT_SYMBOL_GPL(ata_set_sata_spd);
+EXPORT_SYMBOL_GPL(sata_set_spd);
 EXPORT_SYMBOL_GPL(sata_phy_reset);
 EXPORT_SYMBOL_GPL(__sata_phy_reset);
 EXPORT_SYMBOL_GPL(ata_bus_reset);
diff --git a/drivers/scsi/libata.h b/drivers/scsi/libata.h
index 3f8b0a863781..26975df9a3fc 100644
--- a/drivers/scsi/libata.h
+++ b/drivers/scsi/libata.h
@@ -51,8 +51,8 @@ extern void ata_port_flush_task(struct ata_port *ap);
 extern unsigned ata_exec_internal(struct ata_port *ap, struct ata_device *dev,
                                   struct ata_taskfile *tf, const u8 *cdb,
                                   int dma_dir, void *buf, unsigned int buflen);
-extern int ata_down_sata_spd_limit(struct ata_port *ap);
-extern int ata_set_sata_spd_needed(struct ata_port *ap);
+extern int sata_down_spd_limit(struct ata_port *ap);
+extern int sata_set_spd_needed(struct ata_port *ap);
 extern int ata_down_xfermask_limit(struct ata_port *ap, struct ata_device *dev,
                                    int force_pio0);
 extern int ata_set_mode(struct ata_port *ap, struct ata_device **r_failed_dev);
diff --git a/drivers/scsi/sata_sil24.c b/drivers/scsi/sata_sil24.c
index e9fd869140c5..8c167250f4c9 100644
--- a/drivers/scsi/sata_sil24.c
+++ b/drivers/scsi/sata_sil24.c
@@ -528,7 +528,7 @@ static int sil24_hardreset(struct ata_port *ap, unsigned int *class)
         u32 tmp;
 
         /* sil24 does the right thing(tm) without any protection */
-        ata_set_sata_spd(ap);
+        sata_set_spd(ap);
 
         tout_msec = 100;
         if (sata_dev_present(ap))
diff --git a/include/linux/libata.h b/include/linux/libata.h
index d35b1e3bb7e0..0b67aafd3878 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -504,7 +504,7 @@ extern void ata_port_probe(struct ata_port *);
 extern void __sata_phy_reset(struct ata_port *ap);
 extern void sata_phy_reset(struct ata_port *ap);
 extern void ata_bus_reset(struct ata_port *ap);
-extern int ata_set_sata_spd(struct ata_port *ap);
+extern int sata_set_spd(struct ata_port *ap);
 extern int ata_drive_probe_reset(struct ata_port *ap,
                         ata_probeinit_fn_t probeinit,
                         ata_reset_fn_t softreset, ata_reset_fn_t hardreset,