18 files changed, 352 insertions, 30 deletions

diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig
index a737886e39d1..42e5b8175cbf 100644
--- a/drivers/ide/Kconfig
+++ b/drivers/ide/Kconfig
@@ -539,6 +539,15 @@ config BLK_DEV_CS5530
 
           It is safe to say Y to this question.
 
+config BLK_DEV_CS5535
+        tristate "AMD CS5535 chipset support"
+        depends on X86 && !X86_64
+        help
+          Include support for UDMA on the NSC/AMD CS5535 companion chipset.
+          This will automatically be detected and configured if found.
+
+          It is safe to say Y to this question.
+
 config BLK_DEV_HPT34X
         tristate "HPT34X chipset support"
         help
diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c
index e83f54d37f96..f615ab759962 100644
--- a/drivers/ide/ide-floppy.c
+++ b/drivers/ide/ide-floppy.c
@@ -2038,11 +2038,9 @@ static int idefloppy_ioctl(struct inode *inode, struct file *file,
         struct ide_floppy_obj *floppy = ide_floppy_g(bdev->bd_disk);
         ide_drive_t *drive = floppy->drive;
         void __user *argp = (void __user *)arg;
-        int err = generic_ide_ioctl(drive, file, bdev, cmd, arg);
+        int err;
         int prevent = (arg) ? 1 : 0;
         idefloppy_pc_t pc;
-        if (err != -EINVAL)
-                return err;
 
         switch (cmd) {
         case CDROMEJECT:
@@ -2094,7 +2092,7 @@ static int idefloppy_ioctl(struct inode *inode, struct file *file,
         case IDEFLOPPY_IOCTL_FORMAT_GET_PROGRESS:
                 return idefloppy_get_format_progress(drive, argp);
         }
-        return -EINVAL;
+        return generic_ide_ioctl(drive, file, bdev, cmd, arg);
 }
 
 static int idefloppy_media_changed(struct gendisk *disk)
diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c
index 0b0aa4f51628..af7af958ab3e 100644
--- a/drivers/ide/ide-iops.c
+++ b/drivers/ide/ide-iops.c
@@ -104,8 +104,6 @@ void default_hwif_iops (ide_hwif_t *hwif)
         hwif->INSL      = ide_insl;
 }
 
-EXPORT_SYMBOL(default_hwif_iops);
-
 /*
  *      MMIO operations, typically used for SATA controllers
  */
@@ -329,8 +327,6 @@ void default_hwif_transport(ide_hwif_t *hwif)
         hwif->atapi_output_bytes        = atapi_output_bytes;
 }
 
-EXPORT_SYMBOL(default_hwif_transport);
-
 /*
  * Beginning of Taskfile OPCODE Library and feature sets.
  */
@@ -529,8 +525,6 @@ int wait_for_ready (ide_drive_t *drive, int timeout)
         return 0;
 }
 
-EXPORT_SYMBOL(wait_for_ready);
-
 /*
  * This routine busy-waits for the drive status to be not "busy".
  * It then checks the status for all of the "good" bits and none
diff --git a/drivers/ide/ide-taskfile.c b/drivers/ide/ide-taskfile.c
index 7ec18fa3b5ff..54f9639c2a8c 100644
--- a/drivers/ide/ide-taskfile.c
+++ b/drivers/ide/ide-taskfile.c
@@ -161,8 +161,6 @@ ide_startstop_t do_rw_taskfile (ide_drive_t *drive, ide_task_t *task)
         return ide_stopped;
 }
 
-EXPORT_SYMBOL(do_rw_taskfile);
-
 /*
  * set_multmode_intr() is invoked on completion of a WIN_SETMULT cmd.
  */
diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c
index 9fe19808d815..8af179b531c3 100644
--- a/drivers/ide/ide.c
+++ b/drivers/ide/ide.c
@@ -803,6 +803,7 @@ found:
         hwif->irq = hw->irq;
         hwif->noprobe = 0;
         hwif->chipset = hw->chipset;
+        hwif->gendev.parent = hw->dev;
 
         if (!initializing) {
                 probe_hwif_init_with_fixup(hwif, fixup);
diff --git a/drivers/ide/legacy/ide-cs.c b/drivers/ide/legacy/ide-cs.c
index 1dafffa7e513..ef79805218e4 100644
--- a/drivers/ide/legacy/ide-cs.c
+++ b/drivers/ide/legacy/ide-cs.c
@@ -182,13 +182,14 @@ static void ide_detach(dev_link_t *link)
     
 } /* ide_detach */
 
-static int idecs_register(unsigned long io, unsigned long ctl, unsigned long irq)
+static int idecs_register(unsigned long io, unsigned long ctl, unsigned long irq, struct pcmcia_device *handle)
 {
     hw_regs_t hw;
     memset(&hw, 0, sizeof(hw));
     ide_init_hwif_ports(&hw, io, ctl, NULL);
     hw.irq = irq;
     hw.chipset = ide_pci;
+    hw.dev = &handle->dev;
     return ide_register_hw_with_fixup(&hw, NULL, ide_undecoded_slave);
 }
 
@@ -327,12 +328,12 @@ static void ide_config(dev_link_t *link)
 
     /* retry registration in case device is still spinning up */
     for (hd = -1, i = 0; i < 10; i++) {
-        hd = idecs_register(io_base, ctl_base, link->irq.AssignedIRQ);
+        hd = idecs_register(io_base, ctl_base, link->irq.AssignedIRQ, handle);
         if (hd >= 0) break;
         if (link->io.NumPorts1 == 0x20) {
             outb(0x02, ctl_base + 0x10);
             hd = idecs_register(io_base + 0x10, ctl_base + 0x10,
-                                link->irq.AssignedIRQ);
+                                link->irq.AssignedIRQ, handle);
             if (hd >= 0) {
                 io_base += 0x10;
                 ctl_base += 0x10;
diff --git a/drivers/ide/pci/Makefile b/drivers/ide/pci/Makefile
index af46226c1796..f35d684edc25 100644
--- a/drivers/ide/pci/Makefile
+++ b/drivers/ide/pci/Makefile
@@ -6,6 +6,7 @@ obj-$(CONFIG_BLK_DEV_ATIIXP)		+= atiixp.o
 obj-$(CONFIG_BLK_DEV_CMD64X)            += cmd64x.o
 obj-$(CONFIG_BLK_DEV_CS5520)            += cs5520.o
 obj-$(CONFIG_BLK_DEV_CS5530)            += cs5530.o
+obj-$(CONFIG_BLK_DEV_CS5535)            += cs5535.o
 obj-$(CONFIG_BLK_DEV_SC1200)            += sc1200.o
 obj-$(CONFIG_BLK_DEV_CY82C693)          += cy82c693.o
 obj-$(CONFIG_BLK_DEV_HPT34X)            += hpt34x.o
diff --git a/drivers/ide/pci/amd74xx.c b/drivers/ide/pci/amd74xx.c
index 844a6c9fb949..21965e5ef25e 100644
--- a/drivers/ide/pci/amd74xx.c
+++ b/drivers/ide/pci/amd74xx.c
@@ -74,6 +74,7 @@ static struct amd_ide_chip {
         { PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_IDE,        0x50, AMD_UDMA_133 },
         { PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_IDE,        0x50, AMD_UDMA_133 },
         { PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_IDE,        0x50, AMD_UDMA_133 },
+        { PCI_DEVICE_ID_AMD_CS5536_IDE,                 0x40, AMD_UDMA_100 },
         { 0 }
 };
 
@@ -491,6 +492,7 @@ static ide_pci_device_t amd74xx_chipsets[] __devinitdata = {
         /* 14 */ DECLARE_NV_DEV("NFORCE-MCP04"),
         /* 15 */ DECLARE_NV_DEV("NFORCE-MCP51"),
         /* 16 */ DECLARE_NV_DEV("NFORCE-MCP55"),
+        /* 17 */ DECLARE_AMD_DEV("AMD5536"),
 };
 
 static int __devinit amd74xx_probe(struct pci_dev *dev, const struct pci_device_id *id)
@@ -527,6 +529,7 @@ static struct pci_device_id amd74xx_pci_tbl[] = {
         { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_IDE,  PCI_ANY_ID, PCI_ANY_ID, 0, 0, 14 },
         { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_IDE,  PCI_ANY_ID, PCI_ANY_ID, 0, 0, 15 },
         { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_IDE,  PCI_ANY_ID, PCI_ANY_ID, 0, 0, 16 },
+        { PCI_VENDOR_ID_AMD,    PCI_DEVICE_ID_AMD_CS5536_IDE,           PCI_ANY_ID, PCI_ANY_ID, 0, 0, 17 },
         { 0, },
 };
 MODULE_DEVICE_TABLE(pci, amd74xx_pci_tbl);
diff --git a/drivers/ide/pci/cs5535.c b/drivers/ide/pci/cs5535.c
new file mode 100644
index 000000000000..6eb305197f3c
--- /dev/null
+++ b/drivers/ide/pci/cs5535.c
@@ -0,0 +1,305 @@
+/*
+ * linux/drivers/ide/pci/cs5535.c
+ *
+ * Copyright (C) 2004-2005 Advanced Micro Devices, Inc.
+ *
+ * History:
+ * 09/20/2005 - Jaya Kumar <jayakumar.ide@gmail.com>
+ * - Reworked tuneproc, set_drive, misc mods to prep for mainline
+ * - Work was sponsored by CIS (M) Sdn Bhd.
+ * Ported to Kernel 2.6.11 on June 26, 2005 by
+ *   Wolfgang Zuleger <wolfgang.zuleger@gmx.de>
+ *   Alexander Kiausch <alex.kiausch@t-online.de>
+ * Originally developed by AMD for 2.4/2.6
+ *
+ * Development of this chipset driver was funded
+ * by the nice folks at National Semiconductor/AMD.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * Documentation:
+ *  CS5535 documentation available from AMD
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/ide.h>
+
+#include "ide-timing.h"
+
+#define MSR_ATAC_BASE           0x51300000
+#define ATAC_GLD_MSR_CAP        (MSR_ATAC_BASE+0)
+#define ATAC_GLD_MSR_CONFIG     (MSR_ATAC_BASE+0x01)
+#define ATAC_GLD_MSR_SMI        (MSR_ATAC_BASE+0x02)
+#define ATAC_GLD_MSR_ERROR      (MSR_ATAC_BASE+0x03)
+#define ATAC_GLD_MSR_PM         (MSR_ATAC_BASE+0x04)
+#define ATAC_GLD_MSR_DIAG       (MSR_ATAC_BASE+0x05)
+#define ATAC_IO_BAR             (MSR_ATAC_BASE+0x08)
+#define ATAC_RESET              (MSR_ATAC_BASE+0x10)
+#define ATAC_CH0D0_PIO          (MSR_ATAC_BASE+0x20)
+#define ATAC_CH0D0_DMA          (MSR_ATAC_BASE+0x21)
+#define ATAC_CH0D1_PIO          (MSR_ATAC_BASE+0x22)
+#define ATAC_CH0D1_DMA          (MSR_ATAC_BASE+0x23)
+#define ATAC_PCI_ABRTERR        (MSR_ATAC_BASE+0x24)
+#define ATAC_BM0_CMD_PRIM       0x00
+#define ATAC_BM0_STS_PRIM       0x02
+#define ATAC_BM0_PRD            0x04
+#define CS5535_CABLE_DETECT     0x48
+
+/* Format I PIO settings. We seperate out cmd and data for safer timings */
+
+static unsigned int cs5535_pio_cmd_timings[5] =
+{ 0xF7F4, 0x53F3, 0x13F1, 0x5131, 0x1131 };
+static unsigned int cs5535_pio_dta_timings[5] =
+{ 0xF7F4, 0xF173, 0x8141, 0x5131, 0x1131 };
+
+static unsigned int cs5535_mwdma_timings[3] =
+{ 0x7F0FFFF3, 0x7F035352, 0x7f024241 };
+
+static unsigned int cs5535_udma_timings[5] =
+{ 0x7F7436A1, 0x7F733481, 0x7F723261, 0x7F713161, 0x7F703061 };
+
+/* Macros to check if the register is the reset value -  reset value is an
+   invalid timing and indicates the register has not been set previously */
+
+#define CS5535_BAD_PIO(timings) ( (timings&~0x80000000UL) == 0x00009172 )
+#define CS5535_BAD_DMA(timings) ( (timings & 0x000FFFFF) == 0x00077771 )
+
+/****
+ *      cs5535_set_speed         -     Configure the chipset to the new speed
+ *      @drive: Drive to set up
+ *      @speed: desired speed
+ *
+ *      cs5535_set_speed() configures the chipset to a new speed.
+ */
+static void cs5535_set_speed(ide_drive_t *drive, u8 speed)
+{
+
+        u32 reg = 0, dummy;
+        int unit = drive->select.b.unit;
+
+
+        /* Set the PIO timings */
+        if ((speed & XFER_MODE) == XFER_PIO) {
+                u8 pioa;
+                u8 piob;
+                u8 cmd;
+
+                pioa = speed - XFER_PIO_0;
+                piob = ide_get_best_pio_mode(&(drive->hwif->drives[!unit]),
+                                                255, 4, NULL);
+                cmd = pioa < piob ? pioa : piob;
+
+                /* Write the speed of the current drive */
+                reg = (cs5535_pio_cmd_timings[cmd] << 16) |
+                        cs5535_pio_dta_timings[pioa];
+                wrmsr(unit ? ATAC_CH0D1_PIO : ATAC_CH0D0_PIO, reg, 0);
+
+                /* And if nessesary - change the speed of the other drive */
+                rdmsr(unit ?  ATAC_CH0D0_PIO : ATAC_CH0D1_PIO, reg, dummy);
+
+                if (((reg >> 16) & cs5535_pio_cmd_timings[cmd]) !=
+                        cs5535_pio_cmd_timings[cmd]) {
+                        reg &= 0x0000FFFF;
+                        reg |= cs5535_pio_cmd_timings[cmd] << 16;
+                        wrmsr(unit ? ATAC_CH0D0_PIO : ATAC_CH0D1_PIO, reg, 0);
+                }
+
+                /* Set bit 31 of the DMA register for PIO format 1 timings */
+                rdmsr(unit ?  ATAC_CH0D1_DMA : ATAC_CH0D0_DMA, reg, dummy);
+                wrmsr(unit ? ATAC_CH0D1_DMA : ATAC_CH0D0_DMA,
+                                        reg | 0x80000000UL, 0);
+        } else {
+                rdmsr(unit ? ATAC_CH0D1_DMA : ATAC_CH0D0_DMA, reg, dummy);
+
+                reg &= 0x80000000UL;  /* Preserve the PIO format bit */
+
+                if (speed >= XFER_UDMA_0 && speed <= XFER_UDMA_7)
+                        reg |= cs5535_udma_timings[speed - XFER_UDMA_0];
+                else if (speed >= XFER_MW_DMA_0 && speed <= XFER_MW_DMA_2)
+                        reg |= cs5535_mwdma_timings[speed - XFER_MW_DMA_0];
+                else
+                        return;
+
+                wrmsr(unit ? ATAC_CH0D1_DMA : ATAC_CH0D0_DMA, reg, 0);
+        }
+}
+
+static u8 cs5535_ratemask(ide_drive_t *drive)
+{
+        /* eighty93 will return 1 if it's 80core and capable of
+        exceeding udma2, 0 otherwise. we need ratemask to set
+        the max speed and if we can > udma2 then we return 2
+        which selects speed_max as udma4 which is the 5535's max
+        speed, and 1 selects udma2 which is the max for 40c */
+        if (!eighty_ninty_three(drive))
+                return 1;
+
+        return 2;
+}
+
+
+/****
+ *      cs5535_set_drive         -     Configure the drive to the new speed
+ *      @drive: Drive to set up
+ *      @speed: desired speed
+ *
+ *      cs5535_set_drive() configures the drive and the chipset to a
+ *      new speed. It also can be called by upper layers.
+ */
+static int cs5535_set_drive(ide_drive_t *drive, u8 speed)
+{
+        speed = ide_rate_filter(cs5535_ratemask(drive), speed);
+        ide_config_drive_speed(drive, speed);
+        cs5535_set_speed(drive, speed);
+
+        return 0;
+}
+
+/****
+ *      cs5535_tuneproc    -       PIO setup
+ *      @drive: drive to set up
+ *      @pio: mode to use (255 for 'best possible')
+ *
+ *      A callback from the upper layers for PIO-only tuning.
+ */
+static void cs5535_tuneproc(ide_drive_t *drive, u8 xferspeed)
+{
+        u8 modes[] = {  XFER_PIO_0, XFER_PIO_1, XFER_PIO_2, XFER_PIO_3,
+                        XFER_PIO_4 };
+
+        /* cs5535 max pio is pio 4, best_pio will check the blacklist.
+        i think we don't need to rate_filter the incoming xferspeed
+        since we know we're only going to choose pio */
+        xferspeed = ide_get_best_pio_mode(drive, xferspeed, 4, NULL);
+        ide_config_drive_speed(drive, modes[xferspeed]);
+        cs5535_set_speed(drive, xferspeed);
+}
+
+static int cs5535_config_drive_for_dma(ide_drive_t *drive)
+{
+        u8 speed;
+
+        speed = ide_dma_speed(drive, cs5535_ratemask(drive));
+
+        /* If no DMA speed was available then let dma_check hit pio */
+        if (!speed) {
+                return 0;
+        }
+
+        cs5535_set_drive(drive, speed);
+        return ide_dma_enable(drive);
+}
+
+static int cs5535_dma_check(ide_drive_t *drive)
+{
+        ide_hwif_t *hwif        = drive->hwif;
+        struct hd_driveid *id   = drive->id;
+        u8 speed;
+
+        drive->init_speed = 0;
+
+        if ((id->capability & 1) && drive->autodma) {
+                if (ide_use_dma(drive)) {
+                        if (cs5535_config_drive_for_dma(drive))
+                                return hwif->ide_dma_on(drive);
+                }
+
+                goto fast_ata_pio;
+
+        } else if ((id->capability & 8) || (id->field_valid & 2)) {
+fast_ata_pio:
+                speed = ide_get_best_pio_mode(drive, 255, 4, NULL);
+                cs5535_set_drive(drive, speed);
+                return hwif->ide_dma_off_quietly(drive);
+        }
+        /* IORDY not supported */
+        return 0;
+}
+
+static u8 __devinit cs5535_cable_detect(struct pci_dev *dev)
+{
+        u8 bit;
+
+        /* if a 80 wire cable was detected */
+        pci_read_config_byte(dev, CS5535_CABLE_DETECT, &bit);
+        return (bit & 1);
+}
+
+/****
+ *      init_hwif_cs5535        -       Initialize one ide cannel
+ *      @hwif: Channel descriptor
+ *
+ *      This gets invoked by the IDE driver once for each channel. It
+ *      performs channel-specific pre-initialization before drive probing.
+ *
+ */
+static void __devinit init_hwif_cs5535(ide_hwif_t *hwif)
+{
+        int i;
+
+        hwif->autodma = 0;
+
+        hwif->tuneproc = &cs5535_tuneproc;
+        hwif->speedproc = &cs5535_set_drive;
+        hwif->ide_dma_check = &cs5535_dma_check;
+
+        hwif->atapi_dma = 1;
+        hwif->ultra_mask = 0x1F;
+        hwif->mwdma_mask = 0x07;
+
+
+        hwif->udma_four = cs5535_cable_detect(hwif->pci_dev);
+
+        if (!noautodma)
+                hwif->autodma = 1;
+
+        /* just setting autotune and not worrying about bios timings */
+        for (i = 0; i < 2; i++) {
+                hwif->drives[i].autotune = 1;
+                hwif->drives[i].autodma = hwif->autodma;
+        }
+}
+
+static ide_pci_device_t cs5535_chipset __devinitdata = {
+        .name           = "CS5535",
+        .init_hwif      = init_hwif_cs5535,
+        .channels       = 1,
+        .autodma        = AUTODMA,
+        .bootable       = ON_BOARD,
+};
+
+static int __devinit cs5535_init_one(struct pci_dev *dev,
+                                        const struct pci_device_id *id)
+{
+        return ide_setup_pci_device(dev, &cs5535_chipset);
+}
+
+static struct pci_device_id cs5535_pci_tbl[] =
+{
+        { PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_CS5535_IDE, PCI_ANY_ID,
+                PCI_ANY_ID, 0, 0, 0},
+        { 0, },
+};
+
+MODULE_DEVICE_TABLE(pci, cs5535_pci_tbl);
+
+static struct pci_driver driver = {
+        .name       = "CS5535_IDE",
+        .id_table   = cs5535_pci_tbl,
+        .probe      = cs5535_init_one,
+};
+
+static int __init cs5535_ide_init(void)
+{
+        return ide_pci_register_driver(&driver);
+}
+
+module_init(cs5535_ide_init);
+
+MODULE_AUTHOR("AMD");
+MODULE_DESCRIPTION("PCI driver module for AMD/NS CS5535 IDE");
+MODULE_LICENSE("GPL");
diff --git a/drivers/ide/pci/cy82c693.c b/drivers/ide/pci/cy82c693.c
index 5a33513f3dd1..9f41ecd56338 100644
--- a/drivers/ide/pci/cy82c693.c
+++ b/drivers/ide/pci/cy82c693.c
@@ -469,7 +469,7 @@ static void __devinit init_hwif_cy82c693(ide_hwif_t *hwif)
 
 static __devinitdata ide_hwif_t *primary;
 
-void __devinit init_iops_cy82c693(ide_hwif_t *hwif)
+static void __devinit init_iops_cy82c693(ide_hwif_t *hwif)
 {
         if (PCI_FUNC(hwif->pci_dev->devfn) == 1)
                 primary = hwif;
diff --git a/drivers/ide/pci/siimage.c b/drivers/ide/pci/siimage.c
index 2b9961b88135..022d244f2eb0 100644
--- a/drivers/ide/pci/siimage.c
+++ b/drivers/ide/pci/siimage.c
@@ -701,6 +701,7 @@ static unsigned int setup_mmio_siimage (struct pci_dev *dev, const char *name)
         unsigned long barsize   = pci_resource_len(dev, 5);
         u8 tmpbyte      = 0;
         void __iomem *ioaddr;
+        u32 tmp, irq_mask;
 
         /*
          *      Drop back to PIO if we can't map the mmio. Some
@@ -726,6 +727,14 @@ static unsigned int setup_mmio_siimage (struct pci_dev *dev, const char *name)
         pci_set_drvdata(dev, (void *) ioaddr);
 
         if (pdev_is_sata(dev)) {
+                /* make sure IDE0/1 interrupts are not masked */
+                irq_mask = (1 << 22) | (1 << 23);
+                tmp = readl(ioaddr + 0x48);
+                if (tmp & irq_mask) {
+                        tmp &= ~irq_mask;
+                        writel(tmp, ioaddr + 0x48);
+                        readl(ioaddr + 0x48); /* flush */
+                }
                 writel(0, ioaddr + 0x148);
                 writel(0, ioaddr + 0x1C8);
         }
diff --git a/drivers/scsi/ide-scsi.c b/drivers/scsi/ide-scsi.c
index c888af4a4562..3553da0e1cd5 100644
--- a/drivers/scsi/ide-scsi.c
+++ b/drivers/scsi/ide-scsi.c
@@ -395,6 +395,7 @@ static int idescsi_end_request (ide_drive_t *drive, int uptodate, int nrsecs)
         int log = test_bit(IDESCSI_LOG_CMD, &scsi->log);
         struct Scsi_Host *host;
         u8 *scsi_buf;
+        int errors = rq->errors;
         unsigned long flags;
 
         if (!(rq->flags & (REQ_SPECIAL|REQ_SENSE))) {
@@ -421,11 +422,11 @@ static int idescsi_end_request (ide_drive_t *drive, int uptodate, int nrsecs)
                         printk (KERN_WARNING "ide-scsi: %s: timed out for %lu\n",
                                         drive->name, pc->scsi_cmd->serial_number);
                 pc->scsi_cmd->result = DID_TIME_OUT << 16;
-        } else if (rq->errors >= ERROR_MAX) {
+        } else if (errors >= ERROR_MAX) {
                 pc->scsi_cmd->result = DID_ERROR << 16;
                 if (log)
                         printk ("ide-scsi: %s: I/O error for %lu\n", drive->name, pc->scsi_cmd->serial_number);
-        } else if (rq->errors) {
+        } else if (errors) {
                 if (log)
                         printk ("ide-scsi: %s: check condition for %lu\n", drive->name, pc->scsi_cmd->serial_number);
                 if (!idescsi_check_condition(drive, rq))
diff --git a/include/asm-alpha/ide.h b/include/asm-alpha/ide.h
index 68934a25931f..6126afe27380 100644
--- a/include/asm-alpha/ide.h
+++ b/include/asm-alpha/ide.h
@@ -15,10 +15,6 @@
 
 #include <linux/config.h>
 
-#ifndef MAX_HWIFS
-#define MAX_HWIFS       CONFIG_IDE_MAX_HWIFS
-#endif
-
 #define IDE_ARCH_OBSOLETE_DEFAULTS
 
 static inline int ide_default_irq(unsigned long base)
diff --git a/include/asm-i386/ide.h b/include/asm-i386/ide.h
index 79dfab87135d..454440193eac 100644
--- a/include/asm-i386/ide.h
+++ b/include/asm-i386/ide.h
@@ -41,6 +41,12 @@ static __inline__ int ide_default_irq(unsigned long base)
 
 static __inline__ unsigned long ide_default_io_base(int index)
 {
+        /*
+         *      If PCI is present then it is not safe to poke around
+         *      the other legacy IDE ports. Only 0x1f0 and 0x170 are
+         *      defined compatibility mode ports for PCI. A user can 
+         *      override this using ide= but we must default safe.
+         */
         if (pci_find_device(PCI_ANY_ID, PCI_ANY_ID, NULL) == NULL) {
                 switch(index) {
                         case 2: return 0x1e8;
diff --git a/include/asm-sh/ide.h b/include/asm-sh/ide.h
index f42cf3977a57..711dad4cb48b 100644
--- a/include/asm-sh/ide.h
+++ b/include/asm-sh/ide.h
@@ -16,10 +16,6 @@
 
 #include <linux/config.h>
 
-#ifndef MAX_HWIFS
-#define MAX_HWIFS       CONFIG_IDE_MAX_HWIFS
-#endif
-
 #define ide_default_io_ctl(base)        (0)
 
 #include <asm-generic/ide_iops.h>
diff --git a/include/asm-sh64/ide.h b/include/asm-sh64/ide.h
index 6fd514daa1ba..852f50afe39c 100644
--- a/include/asm-sh64/ide.h
+++ b/include/asm-sh64/ide.h
@@ -17,10 +17,6 @@
 
 #include <linux/config.h>
 
-#ifndef MAX_HWIFS
-#define MAX_HWIFS       CONFIG_IDE_MAX_HWIFS
-#endif
-
 /* Without this, the initialisation of PCI IDE cards end up calling
  * ide_init_hwif_ports, which won't work. */
 #ifdef CONFIG_BLK_DEV_IDEPCI
diff --git a/include/linux/ide.h b/include/linux/ide.h
index 3461abc1e854..77ae55d4c13c 100644
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -230,6 +230,7 @@ typedef struct hw_regs_s {
         int             dma;                    /* our dma entry */
         ide_ack_intr_t  *ack_intr;              /* acknowledge interrupt */
         hwif_chipset_t  chipset;
+        struct device   *dev;
 } hw_regs_t;
 
 /*
@@ -266,6 +267,10 @@ static inline void ide_std_init_ports(hw_regs_t *hw,
 
 #include <asm/ide.h>
 
+#ifndef MAX_HWIFS
+#define MAX_HWIFS       CONFIG_IDE_MAX_HWIFS
+#endif
+
 /* needed on alpha, x86/x86_64, ia64, mips, ppc32 and sh */
 #ifndef IDE_ARCH_OBSOLETE_DEFAULTS
 # define ide_default_io_base(index)     (0)
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index 9a96f0588393..4e06eb0f4451 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -387,6 +387,7 @@
 #define PCI_DEVICE_ID_NS_SC1100_SMI     0x0511
 #define PCI_DEVICE_ID_NS_SC1100_XBUS    0x0515
 #define PCI_DEVICE_ID_NS_87410          0xd001
+#define PCI_DEVICE_ID_NS_CS5535_IDE     0x002d
 
 #define PCI_VENDOR_ID_TSENG             0x100c
 #define PCI_DEVICE_ID_TSENG_W32P_2      0x3202
@@ -487,6 +488,8 @@
 #define PCI_DEVICE_ID_AMD_8151_0        0x7454
 #define PCI_DEVICE_ID_AMD_8131_APIC     0x7450
 
+#define PCI_DEVICE_ID_AMD_CS5536_IDE    0x209A
+
 #define PCI_VENDOR_ID_TRIDENT           0x1023
 #define PCI_DEVICE_ID_TRIDENT_4DWAVE_DX 0x2000
 #define PCI_DEVICE_ID_TRIDENT_4DWAVE_NX 0x2001