diff options
47 files changed, 3051 insertions, 1762 deletions
diff --git a/arch/arm/configs/da830_omapl137_defconfig b/arch/arm/configs/da830_omapl137_defconfig deleted file mode 100644 index 7c8e38f5c5ab..000000000000 --- a/arch/arm/configs/da830_omapl137_defconfig +++ /dev/null | |||
@@ -1,1254 +0,0 @@ | |||
1 | # | ||
2 | # Automatically generated make config: don't edit | ||
3 | # Linux kernel version: 2.6.30-rc2-davinci1 | ||
4 | # Wed May 13 15:33:29 2009 | ||
5 | # | ||
6 | CONFIG_ARM=y | ||
7 | CONFIG_SYS_SUPPORTS_APM_EMULATION=y | ||
8 | CONFIG_GENERIC_GPIO=y | ||
9 | CONFIG_GENERIC_TIME=y | ||
10 | CONFIG_GENERIC_CLOCKEVENTS=y | ||
11 | CONFIG_MMU=y | ||
12 | # CONFIG_NO_IOPORT is not set | ||
13 | CONFIG_GENERIC_HARDIRQS=y | ||
14 | CONFIG_STACKTRACE_SUPPORT=y | ||
15 | CONFIG_HAVE_LATENCYTOP_SUPPORT=y | ||
16 | CONFIG_LOCKDEP_SUPPORT=y | ||
17 | CONFIG_TRACE_IRQFLAGS_SUPPORT=y | ||
18 | CONFIG_HARDIRQS_SW_RESEND=y | ||
19 | CONFIG_GENERIC_IRQ_PROBE=y | ||
20 | CONFIG_RWSEM_GENERIC_SPINLOCK=y | ||
21 | # CONFIG_ARCH_HAS_ILOG2_U32 is not set | ||
22 | # CONFIG_ARCH_HAS_ILOG2_U64 is not set | ||
23 | CONFIG_GENERIC_HWEIGHT=y | ||
24 | CONFIG_GENERIC_CALIBRATE_DELAY=y | ||
25 | CONFIG_ZONE_DMA=y | ||
26 | CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y | ||
27 | CONFIG_VECTORS_BASE=0xffff0000 | ||
28 | CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" | ||
29 | |||
30 | # | ||
31 | # General setup | ||
32 | # | ||
33 | CONFIG_EXPERIMENTAL=y | ||
34 | CONFIG_BROKEN_ON_SMP=y | ||
35 | CONFIG_LOCK_KERNEL=y | ||
36 | CONFIG_INIT_ENV_ARG_LIMIT=32 | ||
37 | CONFIG_LOCALVERSION="" | ||
38 | CONFIG_LOCALVERSION_AUTO=y | ||
39 | # CONFIG_SWAP is not set | ||
40 | CONFIG_SYSVIPC=y | ||
41 | CONFIG_SYSVIPC_SYSCTL=y | ||
42 | CONFIG_POSIX_MQUEUE=y | ||
43 | CONFIG_POSIX_MQUEUE_SYSCTL=y | ||
44 | # CONFIG_BSD_PROCESS_ACCT is not set | ||
45 | # CONFIG_TASKSTATS is not set | ||
46 | # CONFIG_AUDIT is not set | ||
47 | |||
48 | # | ||
49 | # RCU Subsystem | ||
50 | # | ||
51 | CONFIG_CLASSIC_RCU=y | ||
52 | # CONFIG_TREE_RCU is not set | ||
53 | # CONFIG_PREEMPT_RCU is not set | ||
54 | # CONFIG_TREE_RCU_TRACE is not set | ||
55 | # CONFIG_PREEMPT_RCU_TRACE is not set | ||
56 | CONFIG_IKCONFIG=y | ||
57 | CONFIG_IKCONFIG_PROC=y | ||
58 | CONFIG_LOG_BUF_SHIFT=14 | ||
59 | CONFIG_GROUP_SCHED=y | ||
60 | CONFIG_FAIR_GROUP_SCHED=y | ||
61 | # CONFIG_RT_GROUP_SCHED is not set | ||
62 | CONFIG_USER_SCHED=y | ||
63 | # CONFIG_CGROUP_SCHED is not set | ||
64 | # CONFIG_CGROUPS is not set | ||
65 | CONFIG_SYSFS_DEPRECATED=y | ||
66 | CONFIG_SYSFS_DEPRECATED_V2=y | ||
67 | # CONFIG_RELAY is not set | ||
68 | # CONFIG_NAMESPACES is not set | ||
69 | CONFIG_BLK_DEV_INITRD=y | ||
70 | CONFIG_INITRAMFS_SOURCE="" | ||
71 | CONFIG_RD_GZIP=y | ||
72 | # CONFIG_RD_BZIP2 is not set | ||
73 | # CONFIG_RD_LZMA is not set | ||
74 | CONFIG_CC_OPTIMIZE_FOR_SIZE=y | ||
75 | CONFIG_SYSCTL=y | ||
76 | CONFIG_ANON_INODES=y | ||
77 | CONFIG_EMBEDDED=y | ||
78 | CONFIG_UID16=y | ||
79 | CONFIG_SYSCTL_SYSCALL=y | ||
80 | CONFIG_KALLSYMS=y | ||
81 | # CONFIG_KALLSYMS_ALL is not set | ||
82 | # CONFIG_KALLSYMS_EXTRA_PASS is not set | ||
83 | # CONFIG_STRIP_ASM_SYMS is not set | ||
84 | CONFIG_HOTPLUG=y | ||
85 | CONFIG_PRINTK=y | ||
86 | CONFIG_BUG=y | ||
87 | CONFIG_ELF_CORE=y | ||
88 | CONFIG_BASE_FULL=y | ||
89 | CONFIG_FUTEX=y | ||
90 | CONFIG_EPOLL=y | ||
91 | CONFIG_SIGNALFD=y | ||
92 | CONFIG_TIMERFD=y | ||
93 | CONFIG_EVENTFD=y | ||
94 | CONFIG_SHMEM=y | ||
95 | CONFIG_AIO=y | ||
96 | CONFIG_VM_EVENT_COUNTERS=y | ||
97 | CONFIG_SLUB_DEBUG=y | ||
98 | CONFIG_COMPAT_BRK=y | ||
99 | # CONFIG_SLAB is not set | ||
100 | CONFIG_SLUB=y | ||
101 | # CONFIG_SLOB is not set | ||
102 | # CONFIG_PROFILING is not set | ||
103 | # CONFIG_MARKERS is not set | ||
104 | CONFIG_HAVE_OPROFILE=y | ||
105 | # CONFIG_KPROBES is not set | ||
106 | CONFIG_HAVE_KPROBES=y | ||
107 | CONFIG_HAVE_KRETPROBES=y | ||
108 | CONFIG_HAVE_CLK=y | ||
109 | # CONFIG_SLOW_WORK is not set | ||
110 | CONFIG_HAVE_GENERIC_DMA_COHERENT=y | ||
111 | CONFIG_SLABINFO=y | ||
112 | CONFIG_RT_MUTEXES=y | ||
113 | CONFIG_BASE_SMALL=0 | ||
114 | CONFIG_MODULES=y | ||
115 | # CONFIG_MODULE_FORCE_LOAD is not set | ||
116 | CONFIG_MODULE_UNLOAD=y | ||
117 | CONFIG_MODULE_FORCE_UNLOAD=y | ||
118 | CONFIG_MODVERSIONS=y | ||
119 | # CONFIG_MODULE_SRCVERSION_ALL is not set | ||
120 | CONFIG_BLOCK=y | ||
121 | # CONFIG_LBD is not set | ||
122 | # CONFIG_BLK_DEV_BSG is not set | ||
123 | # CONFIG_BLK_DEV_INTEGRITY is not set | ||
124 | |||
125 | # | ||
126 | # IO Schedulers | ||
127 | # | ||
128 | CONFIG_IOSCHED_NOOP=y | ||
129 | CONFIG_IOSCHED_AS=y | ||
130 | # CONFIG_IOSCHED_DEADLINE is not set | ||
131 | # CONFIG_IOSCHED_CFQ is not set | ||
132 | CONFIG_DEFAULT_AS=y | ||
133 | # CONFIG_DEFAULT_DEADLINE is not set | ||
134 | # CONFIG_DEFAULT_CFQ is not set | ||
135 | # CONFIG_DEFAULT_NOOP is not set | ||
136 | CONFIG_DEFAULT_IOSCHED="anticipatory" | ||
137 | # CONFIG_FREEZER is not set | ||
138 | |||
139 | # | ||
140 | # System Type | ||
141 | # | ||
142 | # CONFIG_ARCH_AAEC2000 is not set | ||
143 | # CONFIG_ARCH_INTEGRATOR is not set | ||
144 | # CONFIG_ARCH_REALVIEW is not set | ||
145 | # CONFIG_ARCH_VERSATILE is not set | ||
146 | # CONFIG_ARCH_AT91 is not set | ||
147 | # CONFIG_ARCH_CLPS711X is not set | ||
148 | # CONFIG_ARCH_EBSA110 is not set | ||
149 | # CONFIG_ARCH_EP93XX is not set | ||
150 | # CONFIG_ARCH_GEMINI is not set | ||
151 | # CONFIG_ARCH_FOOTBRIDGE is not set | ||
152 | # CONFIG_ARCH_NETX is not set | ||
153 | # CONFIG_ARCH_H720X is not set | ||
154 | # CONFIG_ARCH_IMX is not set | ||
155 | # CONFIG_ARCH_IOP13XX is not set | ||
156 | # CONFIG_ARCH_IOP32X is not set | ||
157 | # CONFIG_ARCH_IOP33X is not set | ||
158 | # CONFIG_ARCH_IXP23XX is not set | ||
159 | # CONFIG_ARCH_IXP2000 is not set | ||
160 | # CONFIG_ARCH_IXP4XX is not set | ||
161 | # CONFIG_ARCH_L7200 is not set | ||
162 | # CONFIG_ARCH_KIRKWOOD is not set | ||
163 | # CONFIG_ARCH_KS8695 is not set | ||
164 | # CONFIG_ARCH_NS9XXX is not set | ||
165 | # CONFIG_ARCH_LOKI is not set | ||
166 | # CONFIG_ARCH_MV78XX0 is not set | ||
167 | # CONFIG_ARCH_MXC is not set | ||
168 | # CONFIG_ARCH_ORION5X is not set | ||
169 | # CONFIG_ARCH_PNX4008 is not set | ||
170 | # CONFIG_ARCH_PXA is not set | ||
171 | # CONFIG_ARCH_MMP is not set | ||
172 | # CONFIG_ARCH_RPC is not set | ||
173 | # CONFIG_ARCH_SA1100 is not set | ||
174 | # CONFIG_ARCH_S3C2410 is not set | ||
175 | # CONFIG_ARCH_S3C64XX is not set | ||
176 | # CONFIG_ARCH_SHARK is not set | ||
177 | # CONFIG_ARCH_LH7A40X is not set | ||
178 | CONFIG_ARCH_DAVINCI=y | ||
179 | # CONFIG_ARCH_OMAP is not set | ||
180 | # CONFIG_ARCH_MSM is not set | ||
181 | # CONFIG_ARCH_W90X900 is not set | ||
182 | CONFIG_CP_INTC=y | ||
183 | |||
184 | # | ||
185 | # TI DaVinci Implementations | ||
186 | # | ||
187 | |||
188 | # | ||
189 | # DaVinci Core Type | ||
190 | # | ||
191 | # CONFIG_ARCH_DAVINCI_DM644x is not set | ||
192 | # CONFIG_ARCH_DAVINCI_DM646x is not set | ||
193 | # CONFIG_ARCH_DAVINCI_DM355 is not set | ||
194 | CONFIG_ARCH_DAVINCI_DA830=y | ||
195 | |||
196 | # | ||
197 | # DaVinci Board Type | ||
198 | # | ||
199 | CONFIG_MACH_DAVINCI_DA830_EVM=y | ||
200 | CONFIG_DAVINCI_MUX=y | ||
201 | # CONFIG_DAVINCI_MUX_DEBUG is not set | ||
202 | # CONFIG_DAVINCI_MUX_WARNINGS is not set | ||
203 | CONFIG_DAVINCI_RESET_CLOCKS=y | ||
204 | |||
205 | # | ||
206 | # Processor Type | ||
207 | # | ||
208 | CONFIG_CPU_32=y | ||
209 | CONFIG_CPU_ARM926T=y | ||
210 | CONFIG_CPU_32v5=y | ||
211 | CONFIG_CPU_ABRT_EV5TJ=y | ||
212 | CONFIG_CPU_PABRT_NOIFAR=y | ||
213 | CONFIG_CPU_CACHE_VIVT=y | ||
214 | CONFIG_CPU_COPY_V4WB=y | ||
215 | CONFIG_CPU_TLB_V4WBI=y | ||
216 | CONFIG_CPU_CP15=y | ||
217 | CONFIG_CPU_CP15_MMU=y | ||
218 | |||
219 | # | ||
220 | # Processor Features | ||
221 | # | ||
222 | CONFIG_ARM_THUMB=y | ||
223 | # CONFIG_CPU_ICACHE_DISABLE is not set | ||
224 | # CONFIG_CPU_DCACHE_DISABLE is not set | ||
225 | CONFIG_CPU_DCACHE_WRITETHROUGH=y | ||
226 | # CONFIG_CPU_CACHE_ROUND_ROBIN is not set | ||
227 | # CONFIG_OUTER_CACHE is not set | ||
228 | CONFIG_COMMON_CLKDEV=y | ||
229 | |||
230 | # | ||
231 | # Bus support | ||
232 | # | ||
233 | # CONFIG_PCI_SYSCALL is not set | ||
234 | # CONFIG_ARCH_SUPPORTS_MSI is not set | ||
235 | # CONFIG_PCCARD is not set | ||
236 | |||
237 | # | ||
238 | # Kernel Features | ||
239 | # | ||
240 | CONFIG_TICK_ONESHOT=y | ||
241 | CONFIG_NO_HZ=y | ||
242 | CONFIG_HIGH_RES_TIMERS=y | ||
243 | CONFIG_GENERIC_CLOCKEVENTS_BUILD=y | ||
244 | CONFIG_VMSPLIT_3G=y | ||
245 | # CONFIG_VMSPLIT_2G is not set | ||
246 | # CONFIG_VMSPLIT_1G is not set | ||
247 | CONFIG_PAGE_OFFSET=0xC0000000 | ||
248 | CONFIG_PREEMPT=y | ||
249 | CONFIG_HZ=100 | ||
250 | CONFIG_AEABI=y | ||
251 | # CONFIG_OABI_COMPAT is not set | ||
252 | CONFIG_ARCH_FLATMEM_HAS_HOLES=y | ||
253 | # CONFIG_ARCH_SPARSEMEM_DEFAULT is not set | ||
254 | # CONFIG_ARCH_SELECT_MEMORY_MODEL is not set | ||
255 | # CONFIG_HIGHMEM is not set | ||
256 | CONFIG_SELECT_MEMORY_MODEL=y | ||
257 | CONFIG_FLATMEM_MANUAL=y | ||
258 | # CONFIG_DISCONTIGMEM_MANUAL is not set | ||
259 | # CONFIG_SPARSEMEM_MANUAL is not set | ||
260 | CONFIG_FLATMEM=y | ||
261 | CONFIG_FLAT_NODE_MEM_MAP=y | ||
262 | CONFIG_PAGEFLAGS_EXTENDED=y | ||
263 | CONFIG_SPLIT_PTLOCK_CPUS=4096 | ||
264 | # CONFIG_PHYS_ADDR_T_64BIT is not set | ||
265 | CONFIG_ZONE_DMA_FLAG=1 | ||
266 | CONFIG_BOUNCE=y | ||
267 | CONFIG_VIRT_TO_BUS=y | ||
268 | CONFIG_UNEVICTABLE_LRU=y | ||
269 | CONFIG_HAVE_MLOCK=y | ||
270 | CONFIG_HAVE_MLOCKED_PAGE_BIT=y | ||
271 | CONFIG_LEDS=y | ||
272 | # CONFIG_LEDS_CPU is not set | ||
273 | CONFIG_ALIGNMENT_TRAP=y | ||
274 | |||
275 | # | ||
276 | # Boot options | ||
277 | # | ||
278 | CONFIG_ZBOOT_ROM_TEXT=0x0 | ||
279 | CONFIG_ZBOOT_ROM_BSS=0x0 | ||
280 | CONFIG_CMDLINE="" | ||
281 | # CONFIG_XIP_KERNEL is not set | ||
282 | # CONFIG_KEXEC is not set | ||
283 | |||
284 | # | ||
285 | # CPU Power Management | ||
286 | # | ||
287 | # CONFIG_CPU_IDLE is not set | ||
288 | |||
289 | # | ||
290 | # Floating point emulation | ||
291 | # | ||
292 | |||
293 | # | ||
294 | # At least one emulation must be selected | ||
295 | # | ||
296 | # CONFIG_VFP is not set | ||
297 | |||
298 | # | ||
299 | # Userspace binary formats | ||
300 | # | ||
301 | CONFIG_BINFMT_ELF=y | ||
302 | # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set | ||
303 | CONFIG_HAVE_AOUT=y | ||
304 | # CONFIG_BINFMT_AOUT is not set | ||
305 | # CONFIG_BINFMT_MISC is not set | ||
306 | |||
307 | # | ||
308 | # Power management options | ||
309 | # | ||
310 | # CONFIG_PM is not set | ||
311 | CONFIG_ARCH_SUSPEND_POSSIBLE=y | ||
312 | CONFIG_NET=y | ||
313 | |||
314 | # | ||
315 | # Networking options | ||
316 | # | ||
317 | CONFIG_PACKET=y | ||
318 | # CONFIG_PACKET_MMAP is not set | ||
319 | CONFIG_UNIX=y | ||
320 | CONFIG_XFRM=y | ||
321 | # CONFIG_XFRM_USER is not set | ||
322 | # CONFIG_XFRM_SUB_POLICY is not set | ||
323 | # CONFIG_XFRM_MIGRATE is not set | ||
324 | # CONFIG_XFRM_STATISTICS is not set | ||
325 | # CONFIG_NET_KEY is not set | ||
326 | CONFIG_INET=y | ||
327 | # CONFIG_IP_MULTICAST is not set | ||
328 | # CONFIG_IP_ADVANCED_ROUTER is not set | ||
329 | CONFIG_IP_FIB_HASH=y | ||
330 | CONFIG_IP_PNP=y | ||
331 | CONFIG_IP_PNP_DHCP=y | ||
332 | # CONFIG_IP_PNP_BOOTP is not set | ||
333 | # CONFIG_IP_PNP_RARP is not set | ||
334 | # CONFIG_NET_IPIP is not set | ||
335 | # CONFIG_NET_IPGRE is not set | ||
336 | # CONFIG_ARPD is not set | ||
337 | # CONFIG_SYN_COOKIES is not set | ||
338 | # CONFIG_INET_AH is not set | ||
339 | # CONFIG_INET_ESP is not set | ||
340 | # CONFIG_INET_IPCOMP is not set | ||
341 | # CONFIG_INET_XFRM_TUNNEL is not set | ||
342 | CONFIG_INET_TUNNEL=m | ||
343 | CONFIG_INET_XFRM_MODE_TRANSPORT=y | ||
344 | CONFIG_INET_XFRM_MODE_TUNNEL=y | ||
345 | CONFIG_INET_XFRM_MODE_BEET=y | ||
346 | # CONFIG_INET_LRO is not set | ||
347 | CONFIG_INET_DIAG=y | ||
348 | CONFIG_INET_TCP_DIAG=y | ||
349 | # CONFIG_TCP_CONG_ADVANCED is not set | ||
350 | CONFIG_TCP_CONG_CUBIC=y | ||
351 | CONFIG_DEFAULT_TCP_CONG="cubic" | ||
352 | # CONFIG_TCP_MD5SIG is not set | ||
353 | CONFIG_IPV6=m | ||
354 | # CONFIG_IPV6_PRIVACY is not set | ||
355 | # CONFIG_IPV6_ROUTER_PREF is not set | ||
356 | # CONFIG_IPV6_OPTIMISTIC_DAD is not set | ||
357 | # CONFIG_INET6_AH is not set | ||
358 | # CONFIG_INET6_ESP is not set | ||
359 | # CONFIG_INET6_IPCOMP is not set | ||
360 | # CONFIG_IPV6_MIP6 is not set | ||
361 | # CONFIG_INET6_XFRM_TUNNEL is not set | ||
362 | # CONFIG_INET6_TUNNEL is not set | ||
363 | CONFIG_INET6_XFRM_MODE_TRANSPORT=m | ||
364 | CONFIG_INET6_XFRM_MODE_TUNNEL=m | ||
365 | CONFIG_INET6_XFRM_MODE_BEET=m | ||
366 | # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set | ||
367 | CONFIG_IPV6_SIT=m | ||
368 | CONFIG_IPV6_NDISC_NODETYPE=y | ||
369 | # CONFIG_IPV6_TUNNEL is not set | ||
370 | # CONFIG_IPV6_MULTIPLE_TABLES is not set | ||
371 | # CONFIG_IPV6_MROUTE is not set | ||
372 | # CONFIG_NETWORK_SECMARK is not set | ||
373 | CONFIG_NETFILTER=y | ||
374 | # CONFIG_NETFILTER_DEBUG is not set | ||
375 | CONFIG_NETFILTER_ADVANCED=y | ||
376 | |||
377 | # | ||
378 | # Core Netfilter Configuration | ||
379 | # | ||
380 | # CONFIG_NETFILTER_NETLINK_QUEUE is not set | ||
381 | # CONFIG_NETFILTER_NETLINK_LOG is not set | ||
382 | # CONFIG_NF_CONNTRACK is not set | ||
383 | # CONFIG_NETFILTER_XTABLES is not set | ||
384 | # CONFIG_IP_VS is not set | ||
385 | |||
386 | # | ||
387 | # IP: Netfilter Configuration | ||
388 | # | ||
389 | # CONFIG_NF_DEFRAG_IPV4 is not set | ||
390 | # CONFIG_IP_NF_QUEUE is not set | ||
391 | # CONFIG_IP_NF_IPTABLES is not set | ||
392 | # CONFIG_IP_NF_ARPTABLES is not set | ||
393 | |||
394 | # | ||
395 | # IPv6: Netfilter Configuration | ||
396 | # | ||
397 | # CONFIG_IP6_NF_QUEUE is not set | ||
398 | # CONFIG_IP6_NF_IPTABLES is not set | ||
399 | # CONFIG_IP_DCCP is not set | ||
400 | # CONFIG_IP_SCTP is not set | ||
401 | # CONFIG_TIPC is not set | ||
402 | # CONFIG_ATM is not set | ||
403 | # CONFIG_BRIDGE is not set | ||
404 | # CONFIG_NET_DSA is not set | ||
405 | # CONFIG_VLAN_8021Q is not set | ||
406 | # CONFIG_DECNET is not set | ||
407 | # CONFIG_LLC2 is not set | ||
408 | # CONFIG_IPX is not set | ||
409 | # CONFIG_ATALK is not set | ||
410 | # CONFIG_X25 is not set | ||
411 | # CONFIG_LAPB is not set | ||
412 | # CONFIG_ECONET is not set | ||
413 | # CONFIG_WAN_ROUTER is not set | ||
414 | # CONFIG_PHONET is not set | ||
415 | # CONFIG_NET_SCHED is not set | ||
416 | # CONFIG_DCB is not set | ||
417 | |||
418 | # | ||
419 | # Network testing | ||
420 | # | ||
421 | # CONFIG_NET_PKTGEN is not set | ||
422 | # CONFIG_HAMRADIO is not set | ||
423 | # CONFIG_CAN is not set | ||
424 | # CONFIG_IRDA is not set | ||
425 | # CONFIG_BT is not set | ||
426 | # CONFIG_AF_RXRPC is not set | ||
427 | # CONFIG_WIRELESS is not set | ||
428 | # CONFIG_WIMAX is not set | ||
429 | # CONFIG_RFKILL is not set | ||
430 | # CONFIG_NET_9P is not set | ||
431 | |||
432 | # | ||
433 | # Device Drivers | ||
434 | # | ||
435 | |||
436 | # | ||
437 | # Generic Driver Options | ||
438 | # | ||
439 | CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" | ||
440 | CONFIG_STANDALONE=y | ||
441 | CONFIG_PREVENT_FIRMWARE_BUILD=y | ||
442 | # CONFIG_FW_LOADER is not set | ||
443 | # CONFIG_DEBUG_DRIVER is not set | ||
444 | # CONFIG_DEBUG_DEVRES is not set | ||
445 | # CONFIG_SYS_HYPERVISOR is not set | ||
446 | # CONFIG_CONNECTOR is not set | ||
447 | # CONFIG_MTD is not set | ||
448 | # CONFIG_PARPORT is not set | ||
449 | CONFIG_BLK_DEV=y | ||
450 | # CONFIG_BLK_DEV_COW_COMMON is not set | ||
451 | CONFIG_BLK_DEV_LOOP=m | ||
452 | # CONFIG_BLK_DEV_CRYPTOLOOP is not set | ||
453 | # CONFIG_BLK_DEV_NBD is not set | ||
454 | CONFIG_BLK_DEV_RAM=y | ||
455 | CONFIG_BLK_DEV_RAM_COUNT=1 | ||
456 | CONFIG_BLK_DEV_RAM_SIZE=32768 | ||
457 | # CONFIG_BLK_DEV_XIP is not set | ||
458 | # CONFIG_CDROM_PKTCDVD is not set | ||
459 | # CONFIG_ATA_OVER_ETH is not set | ||
460 | CONFIG_MISC_DEVICES=y | ||
461 | # CONFIG_ICS932S401 is not set | ||
462 | # CONFIG_ENCLOSURE_SERVICES is not set | ||
463 | # CONFIG_ISL29003 is not set | ||
464 | # CONFIG_C2PORT is not set | ||
465 | |||
466 | # | ||
467 | # EEPROM support | ||
468 | # | ||
469 | CONFIG_EEPROM_AT24=y | ||
470 | # CONFIG_EEPROM_LEGACY is not set | ||
471 | # CONFIG_EEPROM_93CX6 is not set | ||
472 | CONFIG_HAVE_IDE=y | ||
473 | # CONFIG_IDE is not set | ||
474 | |||
475 | # | ||
476 | # SCSI device support | ||
477 | # | ||
478 | # CONFIG_RAID_ATTRS is not set | ||
479 | CONFIG_SCSI=m | ||
480 | CONFIG_SCSI_DMA=y | ||
481 | # CONFIG_SCSI_TGT is not set | ||
482 | # CONFIG_SCSI_NETLINK is not set | ||
483 | CONFIG_SCSI_PROC_FS=y | ||
484 | |||
485 | # | ||
486 | # SCSI support type (disk, tape, CD-ROM) | ||
487 | # | ||
488 | CONFIG_BLK_DEV_SD=m | ||
489 | # CONFIG_CHR_DEV_ST is not set | ||
490 | # CONFIG_CHR_DEV_OSST is not set | ||
491 | # CONFIG_BLK_DEV_SR is not set | ||
492 | # CONFIG_CHR_DEV_SG is not set | ||
493 | # CONFIG_CHR_DEV_SCH is not set | ||
494 | |||
495 | # | ||
496 | # Some SCSI devices (e.g. CD jukebox) support multiple LUNs | ||
497 | # | ||
498 | # CONFIG_SCSI_MULTI_LUN is not set | ||
499 | # CONFIG_SCSI_CONSTANTS is not set | ||
500 | # CONFIG_SCSI_LOGGING is not set | ||
501 | # CONFIG_SCSI_SCAN_ASYNC is not set | ||
502 | CONFIG_SCSI_WAIT_SCAN=m | ||
503 | |||
504 | # | ||
505 | # SCSI Transports | ||
506 | # | ||
507 | # CONFIG_SCSI_SPI_ATTRS is not set | ||
508 | # CONFIG_SCSI_FC_ATTRS is not set | ||
509 | # CONFIG_SCSI_ISCSI_ATTRS is not set | ||
510 | # CONFIG_SCSI_SAS_LIBSAS is not set | ||
511 | # CONFIG_SCSI_SRP_ATTRS is not set | ||
512 | CONFIG_SCSI_LOWLEVEL=y | ||
513 | # CONFIG_ISCSI_TCP is not set | ||
514 | # CONFIG_LIBFC is not set | ||
515 | # CONFIG_LIBFCOE is not set | ||
516 | # CONFIG_SCSI_DEBUG is not set | ||
517 | # CONFIG_SCSI_DH is not set | ||
518 | # CONFIG_SCSI_OSD_INITIATOR is not set | ||
519 | # CONFIG_ATA is not set | ||
520 | # CONFIG_MD is not set | ||
521 | CONFIG_NETDEVICES=y | ||
522 | CONFIG_COMPAT_NET_DEV_OPS=y | ||
523 | # CONFIG_DUMMY is not set | ||
524 | # CONFIG_BONDING is not set | ||
525 | # CONFIG_MACVLAN is not set | ||
526 | # CONFIG_EQUALIZER is not set | ||
527 | CONFIG_TUN=m | ||
528 | # CONFIG_VETH is not set | ||
529 | CONFIG_PHYLIB=y | ||
530 | |||
531 | # | ||
532 | # MII PHY device drivers | ||
533 | # | ||
534 | # CONFIG_MARVELL_PHY is not set | ||
535 | # CONFIG_DAVICOM_PHY is not set | ||
536 | # CONFIG_QSEMI_PHY is not set | ||
537 | CONFIG_LXT_PHY=y | ||
538 | # CONFIG_CICADA_PHY is not set | ||
539 | # CONFIG_VITESSE_PHY is not set | ||
540 | # CONFIG_SMSC_PHY is not set | ||
541 | # CONFIG_BROADCOM_PHY is not set | ||
542 | # CONFIG_ICPLUS_PHY is not set | ||
543 | # CONFIG_REALTEK_PHY is not set | ||
544 | # CONFIG_NATIONAL_PHY is not set | ||
545 | # CONFIG_STE10XP is not set | ||
546 | CONFIG_LSI_ET1011C_PHY=y | ||
547 | # CONFIG_FIXED_PHY is not set | ||
548 | # CONFIG_MDIO_BITBANG is not set | ||
549 | CONFIG_NET_ETHERNET=y | ||
550 | CONFIG_MII=y | ||
551 | # CONFIG_AX88796 is not set | ||
552 | # CONFIG_SMC91X is not set | ||
553 | CONFIG_TI_DAVINCI_EMAC=y | ||
554 | # CONFIG_DM9000 is not set | ||
555 | # CONFIG_ETHOC is not set | ||
556 | # CONFIG_SMC911X is not set | ||
557 | # CONFIG_SMSC911X is not set | ||
558 | # CONFIG_DNET is not set | ||
559 | # CONFIG_IBM_NEW_EMAC_ZMII is not set | ||
560 | # CONFIG_IBM_NEW_EMAC_RGMII is not set | ||
561 | # CONFIG_IBM_NEW_EMAC_TAH is not set | ||
562 | # CONFIG_IBM_NEW_EMAC_EMAC4 is not set | ||
563 | # CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set | ||
564 | # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set | ||
565 | # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set | ||
566 | # CONFIG_B44 is not set | ||
567 | # CONFIG_NETDEV_1000 is not set | ||
568 | # CONFIG_NETDEV_10000 is not set | ||
569 | |||
570 | # | ||
571 | # Wireless LAN | ||
572 | # | ||
573 | # CONFIG_WLAN_PRE80211 is not set | ||
574 | # CONFIG_WLAN_80211 is not set | ||
575 | |||
576 | # | ||
577 | # Enable WiMAX (Networking options) to see the WiMAX drivers | ||
578 | # | ||
579 | # CONFIG_WAN is not set | ||
580 | # CONFIG_PPP is not set | ||
581 | # CONFIG_SLIP is not set | ||
582 | CONFIG_NETCONSOLE=y | ||
583 | # CONFIG_NETCONSOLE_DYNAMIC is not set | ||
584 | CONFIG_NETPOLL=y | ||
585 | CONFIG_NETPOLL_TRAP=y | ||
586 | CONFIG_NET_POLL_CONTROLLER=y | ||
587 | # CONFIG_ISDN is not set | ||
588 | |||
589 | # | ||
590 | # Input device support | ||
591 | # | ||
592 | CONFIG_INPUT=y | ||
593 | # CONFIG_INPUT_FF_MEMLESS is not set | ||
594 | # CONFIG_INPUT_POLLDEV is not set | ||
595 | |||
596 | # | ||
597 | # Userland interfaces | ||
598 | # | ||
599 | CONFIG_INPUT_MOUSEDEV=m | ||
600 | CONFIG_INPUT_MOUSEDEV_PSAUX=y | ||
601 | CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 | ||
602 | CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 | ||
603 | # CONFIG_INPUT_JOYDEV is not set | ||
604 | CONFIG_INPUT_EVDEV=m | ||
605 | CONFIG_INPUT_EVBUG=m | ||
606 | |||
607 | # | ||
608 | # Input Device Drivers | ||
609 | # | ||
610 | CONFIG_INPUT_KEYBOARD=y | ||
611 | CONFIG_KEYBOARD_ATKBD=m | ||
612 | # CONFIG_KEYBOARD_SUNKBD is not set | ||
613 | # CONFIG_KEYBOARD_LKKBD is not set | ||
614 | CONFIG_KEYBOARD_XTKBD=m | ||
615 | # CONFIG_KEYBOARD_NEWTON is not set | ||
616 | # CONFIG_KEYBOARD_STOWAWAY is not set | ||
617 | CONFIG_KEYBOARD_GPIO=y | ||
618 | # CONFIG_INPUT_MOUSE is not set | ||
619 | # CONFIG_INPUT_JOYSTICK is not set | ||
620 | # CONFIG_INPUT_TABLET is not set | ||
621 | CONFIG_INPUT_TOUCHSCREEN=y | ||
622 | # CONFIG_TOUCHSCREEN_AD7879_I2C is not set | ||
623 | # CONFIG_TOUCHSCREEN_AD7879 is not set | ||
624 | # CONFIG_TOUCHSCREEN_FUJITSU is not set | ||
625 | # CONFIG_TOUCHSCREEN_GUNZE is not set | ||
626 | # CONFIG_TOUCHSCREEN_ELO is not set | ||
627 | # CONFIG_TOUCHSCREEN_WACOM_W8001 is not set | ||
628 | # CONFIG_TOUCHSCREEN_MTOUCH is not set | ||
629 | # CONFIG_TOUCHSCREEN_INEXIO is not set | ||
630 | # CONFIG_TOUCHSCREEN_MK712 is not set | ||
631 | # CONFIG_TOUCHSCREEN_PENMOUNT is not set | ||
632 | # CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set | ||
633 | # CONFIG_TOUCHSCREEN_TOUCHWIN is not set | ||
634 | # CONFIG_TOUCHSCREEN_TOUCHIT213 is not set | ||
635 | # CONFIG_TOUCHSCREEN_TSC2007 is not set | ||
636 | # CONFIG_INPUT_MISC is not set | ||
637 | |||
638 | # | ||
639 | # Hardware I/O ports | ||
640 | # | ||
641 | CONFIG_SERIO=y | ||
642 | CONFIG_SERIO_SERPORT=y | ||
643 | CONFIG_SERIO_LIBPS2=y | ||
644 | # CONFIG_SERIO_RAW is not set | ||
645 | # CONFIG_GAMEPORT is not set | ||
646 | |||
647 | # | ||
648 | # Character devices | ||
649 | # | ||
650 | CONFIG_VT=y | ||
651 | CONFIG_CONSOLE_TRANSLATIONS=y | ||
652 | # CONFIG_VT_CONSOLE is not set | ||
653 | CONFIG_HW_CONSOLE=y | ||
654 | # CONFIG_VT_HW_CONSOLE_BINDING is not set | ||
655 | CONFIG_DEVKMEM=y | ||
656 | # CONFIG_SERIAL_NONSTANDARD is not set | ||
657 | |||
658 | # | ||
659 | # Serial drivers | ||
660 | # | ||
661 | CONFIG_SERIAL_8250=y | ||
662 | CONFIG_SERIAL_8250_CONSOLE=y | ||
663 | CONFIG_SERIAL_8250_NR_UARTS=3 | ||
664 | CONFIG_SERIAL_8250_RUNTIME_UARTS=3 | ||
665 | # CONFIG_SERIAL_8250_EXTENDED is not set | ||
666 | |||
667 | # | ||
668 | # Non-8250 serial port support | ||
669 | # | ||
670 | CONFIG_SERIAL_CORE=y | ||
671 | CONFIG_SERIAL_CORE_CONSOLE=y | ||
672 | CONFIG_UNIX98_PTYS=y | ||
673 | # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set | ||
674 | CONFIG_LEGACY_PTYS=y | ||
675 | CONFIG_LEGACY_PTY_COUNT=256 | ||
676 | # CONFIG_IPMI_HANDLER is not set | ||
677 | CONFIG_HW_RANDOM=m | ||
678 | # CONFIG_HW_RANDOM_TIMERIOMEM is not set | ||
679 | # CONFIG_R3964 is not set | ||
680 | # CONFIG_RAW_DRIVER is not set | ||
681 | # CONFIG_TCG_TPM is not set | ||
682 | CONFIG_I2C=y | ||
683 | CONFIG_I2C_BOARDINFO=y | ||
684 | CONFIG_I2C_CHARDEV=y | ||
685 | CONFIG_I2C_HELPER_AUTO=y | ||
686 | |||
687 | # | ||
688 | # I2C Hardware Bus support | ||
689 | # | ||
690 | |||
691 | # | ||
692 | # I2C system bus drivers (mostly embedded / system-on-chip) | ||
693 | # | ||
694 | CONFIG_I2C_DAVINCI=y | ||
695 | # CONFIG_I2C_GPIO is not set | ||
696 | # CONFIG_I2C_OCORES is not set | ||
697 | # CONFIG_I2C_SIMTEC is not set | ||
698 | |||
699 | # | ||
700 | # External I2C/SMBus adapter drivers | ||
701 | # | ||
702 | # CONFIG_I2C_PARPORT_LIGHT is not set | ||
703 | # CONFIG_I2C_TAOS_EVM is not set | ||
704 | |||
705 | # | ||
706 | # Other I2C/SMBus bus drivers | ||
707 | # | ||
708 | # CONFIG_I2C_PCA_PLATFORM is not set | ||
709 | # CONFIG_I2C_STUB is not set | ||
710 | |||
711 | # | ||
712 | # Miscellaneous I2C Chip support | ||
713 | # | ||
714 | # CONFIG_DS1682 is not set | ||
715 | # CONFIG_SENSORS_PCA9539 is not set | ||
716 | # CONFIG_SENSORS_MAX6875 is not set | ||
717 | # CONFIG_SENSORS_TSL2550 is not set | ||
718 | # CONFIG_I2C_DEBUG_CORE is not set | ||
719 | # CONFIG_I2C_DEBUG_ALGO is not set | ||
720 | # CONFIG_I2C_DEBUG_BUS is not set | ||
721 | # CONFIG_I2C_DEBUG_CHIP is not set | ||
722 | # CONFIG_SPI is not set | ||
723 | CONFIG_ARCH_REQUIRE_GPIOLIB=y | ||
724 | CONFIG_GPIOLIB=y | ||
725 | # CONFIG_DEBUG_GPIO is not set | ||
726 | # CONFIG_GPIO_SYSFS is not set | ||
727 | |||
728 | # | ||
729 | # Memory mapped GPIO expanders: | ||
730 | # | ||
731 | |||
732 | # | ||
733 | # I2C GPIO expanders: | ||
734 | # | ||
735 | # CONFIG_GPIO_MAX732X is not set | ||
736 | # CONFIG_GPIO_PCA953X is not set | ||
737 | CONFIG_GPIO_PCF857X=m | ||
738 | |||
739 | # | ||
740 | # PCI GPIO expanders: | ||
741 | # | ||
742 | |||
743 | # | ||
744 | # SPI GPIO expanders: | ||
745 | # | ||
746 | # CONFIG_W1 is not set | ||
747 | # CONFIG_POWER_SUPPLY is not set | ||
748 | # CONFIG_HWMON is not set | ||
749 | # CONFIG_THERMAL is not set | ||
750 | # CONFIG_THERMAL_HWMON is not set | ||
751 | CONFIG_WATCHDOG=y | ||
752 | # CONFIG_WATCHDOG_NOWAYOUT is not set | ||
753 | |||
754 | # | ||
755 | # Watchdog Device Drivers | ||
756 | # | ||
757 | # CONFIG_SOFT_WATCHDOG is not set | ||
758 | # CONFIG_DAVINCI_WATCHDOG is not set | ||
759 | CONFIG_SSB_POSSIBLE=y | ||
760 | |||
761 | # | ||
762 | # Sonics Silicon Backplane | ||
763 | # | ||
764 | # CONFIG_SSB is not set | ||
765 | |||
766 | # | ||
767 | # Multifunction device drivers | ||
768 | # | ||
769 | # CONFIG_MFD_CORE is not set | ||
770 | # CONFIG_MFD_SM501 is not set | ||
771 | # CONFIG_MFD_ASIC3 is not set | ||
772 | # CONFIG_HTC_EGPIO is not set | ||
773 | # CONFIG_HTC_PASIC3 is not set | ||
774 | # CONFIG_TPS65010 is not set | ||
775 | # CONFIG_TWL4030_CORE is not set | ||
776 | # CONFIG_MFD_TMIO is not set | ||
777 | # CONFIG_MFD_T7L66XB is not set | ||
778 | # CONFIG_MFD_TC6387XB is not set | ||
779 | # CONFIG_MFD_TC6393XB is not set | ||
780 | # CONFIG_PMIC_DA903X is not set | ||
781 | # CONFIG_MFD_WM8400 is not set | ||
782 | # CONFIG_MFD_WM8350_I2C is not set | ||
783 | # CONFIG_MFD_PCF50633 is not set | ||
784 | |||
785 | # | ||
786 | # Multimedia devices | ||
787 | # | ||
788 | |||
789 | # | ||
790 | # Multimedia core support | ||
791 | # | ||
792 | # CONFIG_VIDEO_DEV is not set | ||
793 | # CONFIG_DVB_CORE is not set | ||
794 | # CONFIG_VIDEO_MEDIA is not set | ||
795 | |||
796 | # | ||
797 | # Multimedia drivers | ||
798 | # | ||
799 | # CONFIG_DAB is not set | ||
800 | |||
801 | # | ||
802 | # Graphics support | ||
803 | # | ||
804 | # CONFIG_VGASTATE is not set | ||
805 | # CONFIG_VIDEO_OUTPUT_CONTROL is not set | ||
806 | # CONFIG_FB is not set | ||
807 | # CONFIG_BACKLIGHT_LCD_SUPPORT is not set | ||
808 | |||
809 | # | ||
810 | # Display device support | ||
811 | # | ||
812 | # CONFIG_DISPLAY_SUPPORT is not set | ||
813 | |||
814 | # | ||
815 | # Console display driver support | ||
816 | # | ||
817 | # CONFIG_VGA_CONSOLE is not set | ||
818 | CONFIG_DUMMY_CONSOLE=y | ||
819 | CONFIG_SOUND=m | ||
820 | # CONFIG_SOUND_OSS_CORE is not set | ||
821 | CONFIG_SND=m | ||
822 | CONFIG_SND_TIMER=m | ||
823 | CONFIG_SND_PCM=m | ||
824 | CONFIG_SND_JACK=y | ||
825 | # CONFIG_SND_SEQUENCER is not set | ||
826 | # CONFIG_SND_MIXER_OSS is not set | ||
827 | # CONFIG_SND_PCM_OSS is not set | ||
828 | # CONFIG_SND_HRTIMER is not set | ||
829 | # CONFIG_SND_DYNAMIC_MINORS is not set | ||
830 | CONFIG_SND_SUPPORT_OLD_API=y | ||
831 | CONFIG_SND_VERBOSE_PROCFS=y | ||
832 | # CONFIG_SND_VERBOSE_PRINTK is not set | ||
833 | # CONFIG_SND_DEBUG is not set | ||
834 | CONFIG_SND_DRIVERS=y | ||
835 | # CONFIG_SND_DUMMY is not set | ||
836 | # CONFIG_SND_MTPAV is not set | ||
837 | # CONFIG_SND_SERIAL_U16550 is not set | ||
838 | # CONFIG_SND_MPU401 is not set | ||
839 | CONFIG_SND_ARM=y | ||
840 | CONFIG_SND_SOC=m | ||
841 | CONFIG_SND_DAVINCI_SOC=m | ||
842 | CONFIG_SND_SOC_I2C_AND_SPI=m | ||
843 | # CONFIG_SND_SOC_ALL_CODECS is not set | ||
844 | # CONFIG_SOUND_PRIME is not set | ||
845 | # CONFIG_HID_SUPPORT is not set | ||
846 | # CONFIG_USB_SUPPORT is not set | ||
847 | # CONFIG_USB_MUSB_HOST is not set | ||
848 | # CONFIG_USB_MUSB_PERIPHERAL is not set | ||
849 | # CONFIG_USB_MUSB_OTG is not set | ||
850 | # CONFIG_USB_GADGET_MUSB_HDRC is not set | ||
851 | # CONFIG_USB_GADGET_AT91 is not set | ||
852 | # CONFIG_USB_GADGET_ATMEL_USBA is not set | ||
853 | # CONFIG_USB_GADGET_FSL_USB2 is not set | ||
854 | # CONFIG_USB_GADGET_LH7A40X is not set | ||
855 | # CONFIG_USB_GADGET_OMAP is not set | ||
856 | # CONFIG_USB_GADGET_PXA25X is not set | ||
857 | # CONFIG_USB_GADGET_PXA27X is not set | ||
858 | # CONFIG_USB_GADGET_S3C2410 is not set | ||
859 | # CONFIG_USB_GADGET_IMX is not set | ||
860 | # CONFIG_USB_GADGET_M66592 is not set | ||
861 | # CONFIG_USB_GADGET_AMD5536UDC is not set | ||
862 | # CONFIG_USB_GADGET_FSL_QE is not set | ||
863 | # CONFIG_USB_GADGET_CI13XXX is not set | ||
864 | # CONFIG_USB_GADGET_NET2280 is not set | ||
865 | # CONFIG_USB_GADGET_GOKU is not set | ||
866 | # CONFIG_USB_GADGET_DUMMY_HCD is not set | ||
867 | # CONFIG_USB_ZERO is not set | ||
868 | # CONFIG_USB_ETH is not set | ||
869 | # CONFIG_USB_GADGETFS is not set | ||
870 | # CONFIG_USB_FILE_STORAGE is not set | ||
871 | # CONFIG_USB_G_SERIAL is not set | ||
872 | # CONFIG_USB_MIDI_GADGET is not set | ||
873 | # CONFIG_USB_G_PRINTER is not set | ||
874 | # CONFIG_USB_CDC_COMPOSITE is not set | ||
875 | # CONFIG_MMC is not set | ||
876 | # CONFIG_MEMSTICK is not set | ||
877 | # CONFIG_ACCESSIBILITY is not set | ||
878 | # CONFIG_NEW_LEDS is not set | ||
879 | CONFIG_RTC_LIB=y | ||
880 | # CONFIG_RTC_CLASS is not set | ||
881 | # CONFIG_DMADEVICES is not set | ||
882 | # CONFIG_AUXDISPLAY is not set | ||
883 | # CONFIG_REGULATOR is not set | ||
884 | # CONFIG_UIO is not set | ||
885 | # CONFIG_STAGING is not set | ||
886 | |||
887 | # | ||
888 | # File systems | ||
889 | # | ||
890 | CONFIG_EXT2_FS=y | ||
891 | # CONFIG_EXT2_FS_XATTR is not set | ||
892 | # CONFIG_EXT2_FS_XIP is not set | ||
893 | CONFIG_EXT3_FS=y | ||
894 | # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set | ||
895 | CONFIG_EXT3_FS_XATTR=y | ||
896 | # CONFIG_EXT3_FS_POSIX_ACL is not set | ||
897 | # CONFIG_EXT3_FS_SECURITY is not set | ||
898 | # CONFIG_EXT4_FS is not set | ||
899 | CONFIG_JBD=y | ||
900 | # CONFIG_JBD_DEBUG is not set | ||
901 | CONFIG_FS_MBCACHE=y | ||
902 | # CONFIG_REISERFS_FS is not set | ||
903 | # CONFIG_JFS_FS is not set | ||
904 | # CONFIG_FS_POSIX_ACL is not set | ||
905 | CONFIG_FILE_LOCKING=y | ||
906 | CONFIG_XFS_FS=m | ||
907 | # CONFIG_XFS_QUOTA is not set | ||
908 | # CONFIG_XFS_POSIX_ACL is not set | ||
909 | # CONFIG_XFS_RT is not set | ||
910 | # CONFIG_XFS_DEBUG is not set | ||
911 | # CONFIG_OCFS2_FS is not set | ||
912 | # CONFIG_BTRFS_FS is not set | ||
913 | CONFIG_DNOTIFY=y | ||
914 | CONFIG_INOTIFY=y | ||
915 | CONFIG_INOTIFY_USER=y | ||
916 | # CONFIG_QUOTA is not set | ||
917 | # CONFIG_AUTOFS_FS is not set | ||
918 | CONFIG_AUTOFS4_FS=m | ||
919 | # CONFIG_FUSE_FS is not set | ||
920 | |||
921 | # | ||
922 | # Caches | ||
923 | # | ||
924 | # CONFIG_FSCACHE is not set | ||
925 | |||
926 | # | ||
927 | # CD-ROM/DVD Filesystems | ||
928 | # | ||
929 | # CONFIG_ISO9660_FS is not set | ||
930 | # CONFIG_UDF_FS is not set | ||
931 | |||
932 | # | ||
933 | # DOS/FAT/NT Filesystems | ||
934 | # | ||
935 | CONFIG_FAT_FS=y | ||
936 | CONFIG_MSDOS_FS=y | ||
937 | CONFIG_VFAT_FS=y | ||
938 | CONFIG_FAT_DEFAULT_CODEPAGE=437 | ||
939 | CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" | ||
940 | # CONFIG_NTFS_FS is not set | ||
941 | |||
942 | # | ||
943 | # Pseudo filesystems | ||
944 | # | ||
945 | CONFIG_PROC_FS=y | ||
946 | CONFIG_PROC_SYSCTL=y | ||
947 | CONFIG_PROC_PAGE_MONITOR=y | ||
948 | CONFIG_SYSFS=y | ||
949 | CONFIG_TMPFS=y | ||
950 | # CONFIG_TMPFS_POSIX_ACL is not set | ||
951 | # CONFIG_HUGETLB_PAGE is not set | ||
952 | # CONFIG_CONFIGFS_FS is not set | ||
953 | CONFIG_MISC_FILESYSTEMS=y | ||
954 | # CONFIG_ADFS_FS is not set | ||
955 | # CONFIG_AFFS_FS is not set | ||
956 | # CONFIG_HFS_FS is not set | ||
957 | # CONFIG_HFSPLUS_FS is not set | ||
958 | # CONFIG_BEFS_FS is not set | ||
959 | # CONFIG_BFS_FS is not set | ||
960 | # CONFIG_EFS_FS is not set | ||
961 | CONFIG_CRAMFS=y | ||
962 | # CONFIG_SQUASHFS is not set | ||
963 | # CONFIG_VXFS_FS is not set | ||
964 | CONFIG_MINIX_FS=m | ||
965 | # CONFIG_OMFS_FS is not set | ||
966 | # CONFIG_HPFS_FS is not set | ||
967 | # CONFIG_QNX4FS_FS is not set | ||
968 | # CONFIG_ROMFS_FS is not set | ||
969 | # CONFIG_SYSV_FS is not set | ||
970 | # CONFIG_UFS_FS is not set | ||
971 | # CONFIG_NILFS2_FS is not set | ||
972 | CONFIG_NETWORK_FILESYSTEMS=y | ||
973 | CONFIG_NFS_FS=y | ||
974 | CONFIG_NFS_V3=y | ||
975 | # CONFIG_NFS_V3_ACL is not set | ||
976 | # CONFIG_NFS_V4 is not set | ||
977 | CONFIG_ROOT_NFS=y | ||
978 | CONFIG_NFSD=m | ||
979 | CONFIG_NFSD_V3=y | ||
980 | # CONFIG_NFSD_V3_ACL is not set | ||
981 | # CONFIG_NFSD_V4 is not set | ||
982 | CONFIG_LOCKD=y | ||
983 | CONFIG_LOCKD_V4=y | ||
984 | CONFIG_EXPORTFS=m | ||
985 | CONFIG_NFS_COMMON=y | ||
986 | CONFIG_SUNRPC=y | ||
987 | # CONFIG_RPCSEC_GSS_KRB5 is not set | ||
988 | # CONFIG_RPCSEC_GSS_SPKM3 is not set | ||
989 | CONFIG_SMB_FS=m | ||
990 | # CONFIG_SMB_NLS_DEFAULT is not set | ||
991 | # CONFIG_CIFS is not set | ||
992 | # CONFIG_NCP_FS is not set | ||
993 | # CONFIG_CODA_FS is not set | ||
994 | # CONFIG_AFS_FS is not set | ||
995 | |||
996 | # | ||
997 | # Partition Types | ||
998 | # | ||
999 | CONFIG_PARTITION_ADVANCED=y | ||
1000 | # CONFIG_ACORN_PARTITION is not set | ||
1001 | # CONFIG_OSF_PARTITION is not set | ||
1002 | # CONFIG_AMIGA_PARTITION is not set | ||
1003 | # CONFIG_ATARI_PARTITION is not set | ||
1004 | # CONFIG_MAC_PARTITION is not set | ||
1005 | CONFIG_MSDOS_PARTITION=y | ||
1006 | # CONFIG_BSD_DISKLABEL is not set | ||
1007 | # CONFIG_MINIX_SUBPARTITION is not set | ||
1008 | # CONFIG_SOLARIS_X86_PARTITION is not set | ||
1009 | # CONFIG_UNIXWARE_DISKLABEL is not set | ||
1010 | # CONFIG_LDM_PARTITION is not set | ||
1011 | # CONFIG_SGI_PARTITION is not set | ||
1012 | # CONFIG_ULTRIX_PARTITION is not set | ||
1013 | # CONFIG_SUN_PARTITION is not set | ||
1014 | # CONFIG_KARMA_PARTITION is not set | ||
1015 | # CONFIG_EFI_PARTITION is not set | ||
1016 | # CONFIG_SYSV68_PARTITION is not set | ||
1017 | CONFIG_NLS=y | ||
1018 | CONFIG_NLS_DEFAULT="iso8859-1" | ||
1019 | CONFIG_NLS_CODEPAGE_437=y | ||
1020 | # CONFIG_NLS_CODEPAGE_737 is not set | ||
1021 | # CONFIG_NLS_CODEPAGE_775 is not set | ||
1022 | # CONFIG_NLS_CODEPAGE_850 is not set | ||
1023 | # CONFIG_NLS_CODEPAGE_852 is not set | ||
1024 | # CONFIG_NLS_CODEPAGE_855 is not set | ||
1025 | # CONFIG_NLS_CODEPAGE_857 is not set | ||
1026 | # CONFIG_NLS_CODEPAGE_860 is not set | ||
1027 | # CONFIG_NLS_CODEPAGE_861 is not set | ||
1028 | # CONFIG_NLS_CODEPAGE_862 is not set | ||
1029 | # CONFIG_NLS_CODEPAGE_863 is not set | ||
1030 | # CONFIG_NLS_CODEPAGE_864 is not set | ||
1031 | # CONFIG_NLS_CODEPAGE_865 is not set | ||
1032 | # CONFIG_NLS_CODEPAGE_866 is not set | ||
1033 | # CONFIG_NLS_CODEPAGE_869 is not set | ||
1034 | # CONFIG_NLS_CODEPAGE_936 is not set | ||
1035 | # CONFIG_NLS_CODEPAGE_950 is not set | ||
1036 | # CONFIG_NLS_CODEPAGE_932 is not set | ||
1037 | # CONFIG_NLS_CODEPAGE_949 is not set | ||
1038 | # CONFIG_NLS_CODEPAGE_874 is not set | ||
1039 | # CONFIG_NLS_ISO8859_8 is not set | ||
1040 | # CONFIG_NLS_CODEPAGE_1250 is not set | ||
1041 | # CONFIG_NLS_CODEPAGE_1251 is not set | ||
1042 | CONFIG_NLS_ASCII=m | ||
1043 | CONFIG_NLS_ISO8859_1=y | ||
1044 | # CONFIG_NLS_ISO8859_2 is not set | ||
1045 | # CONFIG_NLS_ISO8859_3 is not set | ||
1046 | # CONFIG_NLS_ISO8859_4 is not set | ||
1047 | # CONFIG_NLS_ISO8859_5 is not set | ||
1048 | # CONFIG_NLS_ISO8859_6 is not set | ||
1049 | # CONFIG_NLS_ISO8859_7 is not set | ||
1050 | # CONFIG_NLS_ISO8859_9 is not set | ||
1051 | # CONFIG_NLS_ISO8859_13 is not set | ||
1052 | # CONFIG_NLS_ISO8859_14 is not set | ||
1053 | # CONFIG_NLS_ISO8859_15 is not set | ||
1054 | # CONFIG_NLS_KOI8_R is not set | ||
1055 | # CONFIG_NLS_KOI8_U is not set | ||
1056 | CONFIG_NLS_UTF8=m | ||
1057 | # CONFIG_DLM is not set | ||
1058 | |||
1059 | # | ||
1060 | # Kernel hacking | ||
1061 | # | ||
1062 | # CONFIG_PRINTK_TIME is not set | ||
1063 | CONFIG_ENABLE_WARN_DEPRECATED=y | ||
1064 | CONFIG_ENABLE_MUST_CHECK=y | ||
1065 | CONFIG_FRAME_WARN=1024 | ||
1066 | # CONFIG_MAGIC_SYSRQ is not set | ||
1067 | # CONFIG_UNUSED_SYMBOLS is not set | ||
1068 | CONFIG_DEBUG_FS=y | ||
1069 | # CONFIG_HEADERS_CHECK is not set | ||
1070 | CONFIG_DEBUG_KERNEL=y | ||
1071 | # CONFIG_DEBUG_SHIRQ is not set | ||
1072 | CONFIG_DETECT_SOFTLOCKUP=y | ||
1073 | # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set | ||
1074 | CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 | ||
1075 | CONFIG_DETECT_HUNG_TASK=y | ||
1076 | # CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set | ||
1077 | CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 | ||
1078 | CONFIG_SCHED_DEBUG=y | ||
1079 | # CONFIG_SCHEDSTATS is not set | ||
1080 | CONFIG_TIMER_STATS=y | ||
1081 | # CONFIG_DEBUG_OBJECTS is not set | ||
1082 | # CONFIG_SLUB_DEBUG_ON is not set | ||
1083 | # CONFIG_SLUB_STATS is not set | ||
1084 | CONFIG_DEBUG_PREEMPT=y | ||
1085 | CONFIG_DEBUG_RT_MUTEXES=y | ||
1086 | CONFIG_DEBUG_PI_LIST=y | ||
1087 | # CONFIG_RT_MUTEX_TESTER is not set | ||
1088 | # CONFIG_DEBUG_SPINLOCK is not set | ||
1089 | CONFIG_DEBUG_MUTEXES=y | ||
1090 | # CONFIG_DEBUG_LOCK_ALLOC is not set | ||
1091 | # CONFIG_PROVE_LOCKING is not set | ||
1092 | # CONFIG_LOCK_STAT is not set | ||
1093 | # CONFIG_DEBUG_SPINLOCK_SLEEP is not set | ||
1094 | # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set | ||
1095 | # CONFIG_DEBUG_KOBJECT is not set | ||
1096 | CONFIG_DEBUG_BUGVERBOSE=y | ||
1097 | # CONFIG_DEBUG_INFO is not set | ||
1098 | # CONFIG_DEBUG_VM is not set | ||
1099 | # CONFIG_DEBUG_WRITECOUNT is not set | ||
1100 | # CONFIG_DEBUG_MEMORY_INIT is not set | ||
1101 | # CONFIG_DEBUG_LIST is not set | ||
1102 | # CONFIG_DEBUG_SG is not set | ||
1103 | # CONFIG_DEBUG_NOTIFIERS is not set | ||
1104 | # CONFIG_BOOT_PRINTK_DELAY is not set | ||
1105 | # CONFIG_RCU_TORTURE_TEST is not set | ||
1106 | # CONFIG_RCU_CPU_STALL_DETECTOR is not set | ||
1107 | # CONFIG_BACKTRACE_SELF_TEST is not set | ||
1108 | # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set | ||
1109 | # CONFIG_FAULT_INJECTION is not set | ||
1110 | # CONFIG_LATENCYTOP is not set | ||
1111 | # CONFIG_SYSCTL_SYSCALL_CHECK is not set | ||
1112 | # CONFIG_PAGE_POISONING is not set | ||
1113 | CONFIG_HAVE_FUNCTION_TRACER=y | ||
1114 | CONFIG_TRACING_SUPPORT=y | ||
1115 | |||
1116 | # | ||
1117 | # Tracers | ||
1118 | # | ||
1119 | # CONFIG_FUNCTION_TRACER is not set | ||
1120 | # CONFIG_IRQSOFF_TRACER is not set | ||
1121 | # CONFIG_PREEMPT_TRACER is not set | ||
1122 | # CONFIG_SCHED_TRACER is not set | ||
1123 | # CONFIG_CONTEXT_SWITCH_TRACER is not set | ||
1124 | # CONFIG_EVENT_TRACER is not set | ||
1125 | # CONFIG_BOOT_TRACER is not set | ||
1126 | # CONFIG_TRACE_BRANCH_PROFILING is not set | ||
1127 | # CONFIG_STACK_TRACER is not set | ||
1128 | # CONFIG_KMEMTRACE is not set | ||
1129 | # CONFIG_WORKQUEUE_TRACER is not set | ||
1130 | # CONFIG_BLK_DEV_IO_TRACE is not set | ||
1131 | # CONFIG_DYNAMIC_DEBUG is not set | ||
1132 | # CONFIG_SAMPLES is not set | ||
1133 | CONFIG_HAVE_ARCH_KGDB=y | ||
1134 | # CONFIG_KGDB is not set | ||
1135 | CONFIG_ARM_UNWIND=y | ||
1136 | CONFIG_DEBUG_USER=y | ||
1137 | CONFIG_DEBUG_ERRORS=y | ||
1138 | # CONFIG_DEBUG_STACK_USAGE is not set | ||
1139 | # CONFIG_DEBUG_LL is not set | ||
1140 | |||
1141 | # | ||
1142 | # Security options | ||
1143 | # | ||
1144 | # CONFIG_KEYS is not set | ||
1145 | # CONFIG_SECURITY is not set | ||
1146 | # CONFIG_SECURITYFS is not set | ||
1147 | # CONFIG_SECURITY_FILE_CAPABILITIES is not set | ||
1148 | CONFIG_CRYPTO=y | ||
1149 | |||
1150 | # | ||
1151 | # Crypto core or helper | ||
1152 | # | ||
1153 | # CONFIG_CRYPTO_FIPS is not set | ||
1154 | # CONFIG_CRYPTO_MANAGER is not set | ||
1155 | # CONFIG_CRYPTO_MANAGER2 is not set | ||
1156 | # CONFIG_CRYPTO_GF128MUL is not set | ||
1157 | # CONFIG_CRYPTO_NULL is not set | ||
1158 | # CONFIG_CRYPTO_CRYPTD is not set | ||
1159 | # CONFIG_CRYPTO_AUTHENC is not set | ||
1160 | # CONFIG_CRYPTO_TEST is not set | ||
1161 | |||
1162 | # | ||
1163 | # Authenticated Encryption with Associated Data | ||
1164 | # | ||
1165 | # CONFIG_CRYPTO_CCM is not set | ||
1166 | # CONFIG_CRYPTO_GCM is not set | ||
1167 | # CONFIG_CRYPTO_SEQIV is not set | ||
1168 | |||
1169 | # | ||
1170 | # Block modes | ||
1171 | # | ||
1172 | # CONFIG_CRYPTO_CBC is not set | ||
1173 | # CONFIG_CRYPTO_CTR is not set | ||
1174 | # CONFIG_CRYPTO_CTS is not set | ||
1175 | # CONFIG_CRYPTO_ECB is not set | ||
1176 | # CONFIG_CRYPTO_LRW is not set | ||
1177 | # CONFIG_CRYPTO_PCBC is not set | ||
1178 | # CONFIG_CRYPTO_XTS is not set | ||
1179 | |||
1180 | # | ||
1181 | # Hash modes | ||
1182 | # | ||
1183 | # CONFIG_CRYPTO_HMAC is not set | ||
1184 | # CONFIG_CRYPTO_XCBC is not set | ||
1185 | |||
1186 | # | ||
1187 | # Digest | ||
1188 | # | ||
1189 | # CONFIG_CRYPTO_CRC32C is not set | ||
1190 | # CONFIG_CRYPTO_MD4 is not set | ||
1191 | # CONFIG_CRYPTO_MD5 is not set | ||
1192 | # CONFIG_CRYPTO_MICHAEL_MIC is not set | ||
1193 | # CONFIG_CRYPTO_RMD128 is not set | ||
1194 | # CONFIG_CRYPTO_RMD160 is not set | ||
1195 | # CONFIG_CRYPTO_RMD256 is not set | ||
1196 | # CONFIG_CRYPTO_RMD320 is not set | ||
1197 | # CONFIG_CRYPTO_SHA1 is not set | ||
1198 | # CONFIG_CRYPTO_SHA256 is not set | ||
1199 | # CONFIG_CRYPTO_SHA512 is not set | ||
1200 | # CONFIG_CRYPTO_TGR192 is not set | ||
1201 | # CONFIG_CRYPTO_WP512 is not set | ||
1202 | |||
1203 | # | ||
1204 | # Ciphers | ||
1205 | # | ||
1206 | # CONFIG_CRYPTO_AES is not set | ||
1207 | # CONFIG_CRYPTO_ANUBIS is not set | ||
1208 | # CONFIG_CRYPTO_ARC4 is not set | ||
1209 | # CONFIG_CRYPTO_BLOWFISH is not set | ||
1210 | # CONFIG_CRYPTO_CAMELLIA is not set | ||
1211 | # CONFIG_CRYPTO_CAST5 is not set | ||
1212 | # CONFIG_CRYPTO_CAST6 is not set | ||
1213 | # CONFIG_CRYPTO_DES is not set | ||
1214 | # CONFIG_CRYPTO_FCRYPT is not set | ||
1215 | # CONFIG_CRYPTO_KHAZAD is not set | ||
1216 | # CONFIG_CRYPTO_SALSA20 is not set | ||
1217 | # CONFIG_CRYPTO_SEED is not set | ||
1218 | # CONFIG_CRYPTO_SERPENT is not set | ||
1219 | # CONFIG_CRYPTO_TEA is not set | ||
1220 | # CONFIG_CRYPTO_TWOFISH is not set | ||
1221 | |||
1222 | # | ||
1223 | # Compression | ||
1224 | # | ||
1225 | # CONFIG_CRYPTO_DEFLATE is not set | ||
1226 | # CONFIG_CRYPTO_ZLIB is not set | ||
1227 | # CONFIG_CRYPTO_LZO is not set | ||
1228 | |||
1229 | # | ||
1230 | # Random Number Generation | ||
1231 | # | ||
1232 | # CONFIG_CRYPTO_ANSI_CPRNG is not set | ||
1233 | # CONFIG_CRYPTO_HW is not set | ||
1234 | # CONFIG_BINARY_PRINTF is not set | ||
1235 | |||
1236 | # | ||
1237 | # Library routines | ||
1238 | # | ||
1239 | CONFIG_BITREVERSE=y | ||
1240 | CONFIG_GENERIC_FIND_LAST_BIT=y | ||
1241 | CONFIG_CRC_CCITT=m | ||
1242 | # CONFIG_CRC16 is not set | ||
1243 | CONFIG_CRC_T10DIF=m | ||
1244 | # CONFIG_CRC_ITU_T is not set | ||
1245 | CONFIG_CRC32=y | ||
1246 | # CONFIG_CRC7 is not set | ||
1247 | # CONFIG_LIBCRC32C is not set | ||
1248 | CONFIG_ZLIB_INFLATE=y | ||
1249 | CONFIG_DECOMPRESS_GZIP=y | ||
1250 | CONFIG_GENERIC_ALLOCATOR=y | ||
1251 | CONFIG_HAS_IOMEM=y | ||
1252 | CONFIG_HAS_IOPORT=y | ||
1253 | CONFIG_HAS_DMA=y | ||
1254 | CONFIG_NLATTR=y | ||
diff --git a/arch/arm/configs/da850_omapl138_defconfig b/arch/arm/configs/da8xx_omapl_defconfig index 842a70b079bf..50bd25a10f0d 100644 --- a/arch/arm/configs/da850_omapl138_defconfig +++ b/arch/arm/configs/da8xx_omapl_defconfig | |||
@@ -1,15 +1,13 @@ | |||
1 | # | 1 | # |
2 | # Automatically generated make config: don't edit | 2 | # Automatically generated make config: don't edit |
3 | # Linux kernel version: 2.6.30-davinci1 | 3 | # Linux kernel version: 2.6.32-rc5 |
4 | # Mon Jun 29 07:54:15 2009 | 4 | # Thu Oct 22 12:19:19 2009 |
5 | # | 5 | # |
6 | CONFIG_ARM=y | 6 | CONFIG_ARM=y |
7 | CONFIG_SYS_SUPPORTS_APM_EMULATION=y | 7 | CONFIG_SYS_SUPPORTS_APM_EMULATION=y |
8 | CONFIG_GENERIC_GPIO=y | 8 | CONFIG_GENERIC_GPIO=y |
9 | CONFIG_GENERIC_TIME=y | 9 | CONFIG_GENERIC_TIME=y |
10 | CONFIG_GENERIC_CLOCKEVENTS=y | 10 | CONFIG_GENERIC_CLOCKEVENTS=y |
11 | CONFIG_MMU=y | ||
12 | # CONFIG_NO_IOPORT is not set | ||
13 | CONFIG_GENERIC_HARDIRQS=y | 11 | CONFIG_GENERIC_HARDIRQS=y |
14 | CONFIG_STACKTRACE_SUPPORT=y | 12 | CONFIG_STACKTRACE_SUPPORT=y |
15 | CONFIG_HAVE_LATENCYTOP_SUPPORT=y | 13 | CONFIG_HAVE_LATENCYTOP_SUPPORT=y |
@@ -18,14 +16,14 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y | |||
18 | CONFIG_HARDIRQS_SW_RESEND=y | 16 | CONFIG_HARDIRQS_SW_RESEND=y |
19 | CONFIG_GENERIC_IRQ_PROBE=y | 17 | CONFIG_GENERIC_IRQ_PROBE=y |
20 | CONFIG_RWSEM_GENERIC_SPINLOCK=y | 18 | CONFIG_RWSEM_GENERIC_SPINLOCK=y |
21 | # CONFIG_ARCH_HAS_ILOG2_U32 is not set | 19 | CONFIG_ARCH_HAS_CPUFREQ=y |
22 | # CONFIG_ARCH_HAS_ILOG2_U64 is not set | ||
23 | CONFIG_GENERIC_HWEIGHT=y | 20 | CONFIG_GENERIC_HWEIGHT=y |
24 | CONFIG_GENERIC_CALIBRATE_DELAY=y | 21 | CONFIG_GENERIC_CALIBRATE_DELAY=y |
25 | CONFIG_ZONE_DMA=y | 22 | CONFIG_ZONE_DMA=y |
26 | CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y | 23 | CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y |
27 | CONFIG_VECTORS_BASE=0xffff0000 | 24 | CONFIG_VECTORS_BASE=0xffff0000 |
28 | CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" | 25 | CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" |
26 | CONFIG_CONSTRUCTORS=y | ||
29 | 27 | ||
30 | # | 28 | # |
31 | # General setup | 29 | # General setup |
@@ -48,11 +46,12 @@ CONFIG_POSIX_MQUEUE_SYSCTL=y | |||
48 | # | 46 | # |
49 | # RCU Subsystem | 47 | # RCU Subsystem |
50 | # | 48 | # |
51 | CONFIG_CLASSIC_RCU=y | 49 | CONFIG_TREE_RCU=y |
52 | # CONFIG_TREE_RCU is not set | 50 | # CONFIG_TREE_PREEMPT_RCU is not set |
53 | # CONFIG_PREEMPT_RCU is not set | 51 | # CONFIG_RCU_TRACE is not set |
52 | CONFIG_RCU_FANOUT=32 | ||
53 | # CONFIG_RCU_FANOUT_EXACT is not set | ||
54 | # CONFIG_TREE_RCU_TRACE is not set | 54 | # CONFIG_TREE_RCU_TRACE is not set |
55 | # CONFIG_PREEMPT_RCU_TRACE is not set | ||
56 | CONFIG_IKCONFIG=y | 55 | CONFIG_IKCONFIG=y |
57 | CONFIG_IKCONFIG_PROC=y | 56 | CONFIG_IKCONFIG_PROC=y |
58 | CONFIG_LOG_BUF_SHIFT=14 | 57 | CONFIG_LOG_BUF_SHIFT=14 |
@@ -62,8 +61,7 @@ CONFIG_FAIR_GROUP_SCHED=y | |||
62 | CONFIG_USER_SCHED=y | 61 | CONFIG_USER_SCHED=y |
63 | # CONFIG_CGROUP_SCHED is not set | 62 | # CONFIG_CGROUP_SCHED is not set |
64 | # CONFIG_CGROUPS is not set | 63 | # CONFIG_CGROUPS is not set |
65 | CONFIG_SYSFS_DEPRECATED=y | 64 | # CONFIG_SYSFS_DEPRECATED_V2 is not set |
66 | CONFIG_SYSFS_DEPRECATED_V2=y | ||
67 | # CONFIG_RELAY is not set | 65 | # CONFIG_RELAY is not set |
68 | # CONFIG_NAMESPACES is not set | 66 | # CONFIG_NAMESPACES is not set |
69 | CONFIG_BLK_DEV_INITRD=y | 67 | CONFIG_BLK_DEV_INITRD=y |
@@ -80,7 +78,6 @@ CONFIG_SYSCTL_SYSCALL=y | |||
80 | CONFIG_KALLSYMS=y | 78 | CONFIG_KALLSYMS=y |
81 | # CONFIG_KALLSYMS_ALL is not set | 79 | # CONFIG_KALLSYMS_ALL is not set |
82 | # CONFIG_KALLSYMS_EXTRA_PASS is not set | 80 | # CONFIG_KALLSYMS_EXTRA_PASS is not set |
83 | # CONFIG_STRIP_ASM_SYMS is not set | ||
84 | CONFIG_HOTPLUG=y | 81 | CONFIG_HOTPLUG=y |
85 | CONFIG_PRINTK=y | 82 | CONFIG_PRINTK=y |
86 | CONFIG_BUG=y | 83 | CONFIG_BUG=y |
@@ -93,6 +90,10 @@ CONFIG_TIMERFD=y | |||
93 | CONFIG_EVENTFD=y | 90 | CONFIG_EVENTFD=y |
94 | CONFIG_SHMEM=y | 91 | CONFIG_SHMEM=y |
95 | CONFIG_AIO=y | 92 | CONFIG_AIO=y |
93 | |||
94 | # | ||
95 | # Kernel Performance Events And Counters | ||
96 | # | ||
96 | CONFIG_VM_EVENT_COUNTERS=y | 97 | CONFIG_VM_EVENT_COUNTERS=y |
97 | CONFIG_SLUB_DEBUG=y | 98 | CONFIG_SLUB_DEBUG=y |
98 | CONFIG_COMPAT_BRK=y | 99 | CONFIG_COMPAT_BRK=y |
@@ -100,12 +101,16 @@ CONFIG_COMPAT_BRK=y | |||
100 | CONFIG_SLUB=y | 101 | CONFIG_SLUB=y |
101 | # CONFIG_SLOB is not set | 102 | # CONFIG_SLOB is not set |
102 | # CONFIG_PROFILING is not set | 103 | # CONFIG_PROFILING is not set |
103 | # CONFIG_MARKERS is not set | ||
104 | CONFIG_HAVE_OPROFILE=y | 104 | CONFIG_HAVE_OPROFILE=y |
105 | # CONFIG_KPROBES is not set | 105 | # CONFIG_KPROBES is not set |
106 | CONFIG_HAVE_KPROBES=y | 106 | CONFIG_HAVE_KPROBES=y |
107 | CONFIG_HAVE_KRETPROBES=y | 107 | CONFIG_HAVE_KRETPROBES=y |
108 | CONFIG_HAVE_CLK=y | 108 | CONFIG_HAVE_CLK=y |
109 | |||
110 | # | ||
111 | # GCOV-based kernel profiling | ||
112 | # | ||
113 | # CONFIG_GCOV_KERNEL is not set | ||
109 | # CONFIG_SLOW_WORK is not set | 114 | # CONFIG_SLOW_WORK is not set |
110 | CONFIG_HAVE_GENERIC_DMA_COHERENT=y | 115 | CONFIG_HAVE_GENERIC_DMA_COHERENT=y |
111 | CONFIG_SLABINFO=y | 116 | CONFIG_SLABINFO=y |
@@ -118,7 +123,7 @@ CONFIG_MODULE_FORCE_UNLOAD=y | |||
118 | CONFIG_MODVERSIONS=y | 123 | CONFIG_MODVERSIONS=y |
119 | # CONFIG_MODULE_SRCVERSION_ALL is not set | 124 | # CONFIG_MODULE_SRCVERSION_ALL is not set |
120 | CONFIG_BLOCK=y | 125 | CONFIG_BLOCK=y |
121 | # CONFIG_LBD is not set | 126 | CONFIG_LBDAF=y |
122 | # CONFIG_BLK_DEV_BSG is not set | 127 | # CONFIG_BLK_DEV_BSG is not set |
123 | # CONFIG_BLK_DEV_INTEGRITY is not set | 128 | # CONFIG_BLK_DEV_INTEGRITY is not set |
124 | 129 | ||
@@ -139,19 +144,22 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" | |||
139 | # | 144 | # |
140 | # System Type | 145 | # System Type |
141 | # | 146 | # |
147 | CONFIG_MMU=y | ||
142 | # CONFIG_ARCH_AAEC2000 is not set | 148 | # CONFIG_ARCH_AAEC2000 is not set |
143 | # CONFIG_ARCH_INTEGRATOR is not set | 149 | # CONFIG_ARCH_INTEGRATOR is not set |
144 | # CONFIG_ARCH_REALVIEW is not set | 150 | # CONFIG_ARCH_REALVIEW is not set |
145 | # CONFIG_ARCH_VERSATILE is not set | 151 | # CONFIG_ARCH_VERSATILE is not set |
146 | # CONFIG_ARCH_AT91 is not set | 152 | # CONFIG_ARCH_AT91 is not set |
147 | # CONFIG_ARCH_CLPS711X is not set | 153 | # CONFIG_ARCH_CLPS711X is not set |
154 | # CONFIG_ARCH_GEMINI is not set | ||
148 | # CONFIG_ARCH_EBSA110 is not set | 155 | # CONFIG_ARCH_EBSA110 is not set |
149 | # CONFIG_ARCH_EP93XX is not set | 156 | # CONFIG_ARCH_EP93XX is not set |
150 | # CONFIG_ARCH_GEMINI is not set | ||
151 | # CONFIG_ARCH_FOOTBRIDGE is not set | 157 | # CONFIG_ARCH_FOOTBRIDGE is not set |
158 | # CONFIG_ARCH_MXC is not set | ||
159 | # CONFIG_ARCH_STMP3XXX is not set | ||
152 | # CONFIG_ARCH_NETX is not set | 160 | # CONFIG_ARCH_NETX is not set |
153 | # CONFIG_ARCH_H720X is not set | 161 | # CONFIG_ARCH_H720X is not set |
154 | # CONFIG_ARCH_IMX is not set | 162 | # CONFIG_ARCH_NOMADIK is not set |
155 | # CONFIG_ARCH_IOP13XX is not set | 163 | # CONFIG_ARCH_IOP13XX is not set |
156 | # CONFIG_ARCH_IOP32X is not set | 164 | # CONFIG_ARCH_IOP32X is not set |
157 | # CONFIG_ARCH_IOP33X is not set | 165 | # CONFIG_ARCH_IOP33X is not set |
@@ -160,25 +168,27 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" | |||
160 | # CONFIG_ARCH_IXP4XX is not set | 168 | # CONFIG_ARCH_IXP4XX is not set |
161 | # CONFIG_ARCH_L7200 is not set | 169 | # CONFIG_ARCH_L7200 is not set |
162 | # CONFIG_ARCH_KIRKWOOD is not set | 170 | # CONFIG_ARCH_KIRKWOOD is not set |
163 | # CONFIG_ARCH_KS8695 is not set | ||
164 | # CONFIG_ARCH_NS9XXX is not set | ||
165 | # CONFIG_ARCH_LOKI is not set | 171 | # CONFIG_ARCH_LOKI is not set |
166 | # CONFIG_ARCH_MV78XX0 is not set | 172 | # CONFIG_ARCH_MV78XX0 is not set |
167 | # CONFIG_ARCH_MXC is not set | ||
168 | # CONFIG_ARCH_ORION5X is not set | 173 | # CONFIG_ARCH_ORION5X is not set |
174 | # CONFIG_ARCH_MMP is not set | ||
175 | # CONFIG_ARCH_KS8695 is not set | ||
176 | # CONFIG_ARCH_NS9XXX is not set | ||
177 | # CONFIG_ARCH_W90X900 is not set | ||
169 | # CONFIG_ARCH_PNX4008 is not set | 178 | # CONFIG_ARCH_PNX4008 is not set |
170 | # CONFIG_ARCH_PXA is not set | 179 | # CONFIG_ARCH_PXA is not set |
171 | # CONFIG_ARCH_MMP is not set | 180 | # CONFIG_ARCH_MSM is not set |
172 | # CONFIG_ARCH_RPC is not set | 181 | # CONFIG_ARCH_RPC is not set |
173 | # CONFIG_ARCH_SA1100 is not set | 182 | # CONFIG_ARCH_SA1100 is not set |
174 | # CONFIG_ARCH_S3C2410 is not set | 183 | # CONFIG_ARCH_S3C2410 is not set |
175 | # CONFIG_ARCH_S3C64XX is not set | 184 | # CONFIG_ARCH_S3C64XX is not set |
185 | # CONFIG_ARCH_S5PC1XX is not set | ||
176 | # CONFIG_ARCH_SHARK is not set | 186 | # CONFIG_ARCH_SHARK is not set |
177 | # CONFIG_ARCH_LH7A40X is not set | 187 | # CONFIG_ARCH_LH7A40X is not set |
188 | # CONFIG_ARCH_U300 is not set | ||
178 | CONFIG_ARCH_DAVINCI=y | 189 | CONFIG_ARCH_DAVINCI=y |
179 | # CONFIG_ARCH_OMAP is not set | 190 | # CONFIG_ARCH_OMAP is not set |
180 | # CONFIG_ARCH_MSM is not set | 191 | # CONFIG_ARCH_BCMRING is not set |
181 | # CONFIG_ARCH_W90X900 is not set | ||
182 | CONFIG_CP_INTC=y | 192 | CONFIG_CP_INTC=y |
183 | 193 | ||
184 | # | 194 | # |
@@ -191,7 +201,7 @@ CONFIG_CP_INTC=y | |||
191 | # CONFIG_ARCH_DAVINCI_DM644x is not set | 201 | # CONFIG_ARCH_DAVINCI_DM644x is not set |
192 | # CONFIG_ARCH_DAVINCI_DM355 is not set | 202 | # CONFIG_ARCH_DAVINCI_DM355 is not set |
193 | # CONFIG_ARCH_DAVINCI_DM646x is not set | 203 | # CONFIG_ARCH_DAVINCI_DM646x is not set |
194 | # CONFIG_ARCH_DAVINCI_DA830 is not set | 204 | CONFIG_ARCH_DAVINCI_DA830=y |
195 | CONFIG_ARCH_DAVINCI_DA850=y | 205 | CONFIG_ARCH_DAVINCI_DA850=y |
196 | CONFIG_ARCH_DAVINCI_DA8XX=y | 206 | CONFIG_ARCH_DAVINCI_DA8XX=y |
197 | # CONFIG_ARCH_DAVINCI_DM365 is not set | 207 | # CONFIG_ARCH_DAVINCI_DM365 is not set |
@@ -199,7 +209,14 @@ CONFIG_ARCH_DAVINCI_DA8XX=y | |||
199 | # | 209 | # |
200 | # DaVinci Board Type | 210 | # DaVinci Board Type |
201 | # | 211 | # |
212 | CONFIG_MACH_DAVINCI_DA830_EVM=y | ||
213 | CONFIG_DA830_UI=y | ||
214 | CONFIG_DA830_UI_LCD=y | ||
215 | # CONFIG_DA830_UI_NAND is not set | ||
202 | CONFIG_MACH_DAVINCI_DA850_EVM=y | 216 | CONFIG_MACH_DAVINCI_DA850_EVM=y |
217 | CONFIG_DA850_UI_EXP=y | ||
218 | CONFIG_DA850_UI_NONE=y | ||
219 | # CONFIG_DA850_UI_RMII is not set | ||
203 | CONFIG_DAVINCI_MUX=y | 220 | CONFIG_DAVINCI_MUX=y |
204 | # CONFIG_DAVINCI_MUX_DEBUG is not set | 221 | # CONFIG_DAVINCI_MUX_DEBUG is not set |
205 | # CONFIG_DAVINCI_MUX_WARNINGS is not set | 222 | # CONFIG_DAVINCI_MUX_WARNINGS is not set |
@@ -212,7 +229,7 @@ CONFIG_CPU_32=y | |||
212 | CONFIG_CPU_ARM926T=y | 229 | CONFIG_CPU_ARM926T=y |
213 | CONFIG_CPU_32v5=y | 230 | CONFIG_CPU_32v5=y |
214 | CONFIG_CPU_ABRT_EV5TJ=y | 231 | CONFIG_CPU_ABRT_EV5TJ=y |
215 | CONFIG_CPU_PABRT_NOIFAR=y | 232 | CONFIG_CPU_PABRT_LEGACY=y |
216 | CONFIG_CPU_CACHE_VIVT=y | 233 | CONFIG_CPU_CACHE_VIVT=y |
217 | CONFIG_CPU_COPY_V4WB=y | 234 | CONFIG_CPU_COPY_V4WB=y |
218 | CONFIG_CPU_TLB_V4WBI=y | 235 | CONFIG_CPU_TLB_V4WBI=y |
@@ -225,9 +242,9 @@ CONFIG_CPU_CP15_MMU=y | |||
225 | CONFIG_ARM_THUMB=y | 242 | CONFIG_ARM_THUMB=y |
226 | # CONFIG_CPU_ICACHE_DISABLE is not set | 243 | # CONFIG_CPU_ICACHE_DISABLE is not set |
227 | # CONFIG_CPU_DCACHE_DISABLE is not set | 244 | # CONFIG_CPU_DCACHE_DISABLE is not set |
228 | # CONFIG_CPU_DCACHE_WRITETHROUGH is not set | 245 | CONFIG_CPU_DCACHE_WRITETHROUGH=y |
229 | # CONFIG_CPU_CACHE_ROUND_ROBIN is not set | 246 | # CONFIG_CPU_CACHE_ROUND_ROBIN is not set |
230 | # CONFIG_OUTER_CACHE is not set | 247 | CONFIG_ARM_L1_CACHE_SHIFT=5 |
231 | CONFIG_COMMON_CLKDEV=y | 248 | CONFIG_COMMON_CLKDEV=y |
232 | 249 | ||
233 | # | 250 | # |
@@ -248,11 +265,12 @@ CONFIG_VMSPLIT_3G=y | |||
248 | # CONFIG_VMSPLIT_2G is not set | 265 | # CONFIG_VMSPLIT_2G is not set |
249 | # CONFIG_VMSPLIT_1G is not set | 266 | # CONFIG_VMSPLIT_1G is not set |
250 | CONFIG_PAGE_OFFSET=0xC0000000 | 267 | CONFIG_PAGE_OFFSET=0xC0000000 |
268 | # CONFIG_PREEMPT_NONE is not set | ||
269 | # CONFIG_PREEMPT_VOLUNTARY is not set | ||
251 | CONFIG_PREEMPT=y | 270 | CONFIG_PREEMPT=y |
252 | CONFIG_HZ=100 | 271 | CONFIG_HZ=100 |
253 | CONFIG_AEABI=y | 272 | CONFIG_AEABI=y |
254 | # CONFIG_OABI_COMPAT is not set | 273 | # CONFIG_OABI_COMPAT is not set |
255 | # CONFIG_ARCH_HAS_HOLES_MEMORYMODEL is not set | ||
256 | # CONFIG_ARCH_SPARSEMEM_DEFAULT is not set | 274 | # CONFIG_ARCH_SPARSEMEM_DEFAULT is not set |
257 | # CONFIG_ARCH_SELECT_MEMORY_MODEL is not set | 275 | # CONFIG_ARCH_SELECT_MEMORY_MODEL is not set |
258 | # CONFIG_HIGHMEM is not set | 276 | # CONFIG_HIGHMEM is not set |
@@ -268,12 +286,14 @@ CONFIG_SPLIT_PTLOCK_CPUS=4096 | |||
268 | CONFIG_ZONE_DMA_FLAG=1 | 286 | CONFIG_ZONE_DMA_FLAG=1 |
269 | CONFIG_BOUNCE=y | 287 | CONFIG_BOUNCE=y |
270 | CONFIG_VIRT_TO_BUS=y | 288 | CONFIG_VIRT_TO_BUS=y |
271 | CONFIG_UNEVICTABLE_LRU=y | ||
272 | CONFIG_HAVE_MLOCK=y | 289 | CONFIG_HAVE_MLOCK=y |
273 | CONFIG_HAVE_MLOCKED_PAGE_BIT=y | 290 | CONFIG_HAVE_MLOCKED_PAGE_BIT=y |
291 | # CONFIG_KSM is not set | ||
292 | CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 | ||
274 | CONFIG_LEDS=y | 293 | CONFIG_LEDS=y |
275 | # CONFIG_LEDS_CPU is not set | 294 | # CONFIG_LEDS_CPU is not set |
276 | CONFIG_ALIGNMENT_TRAP=y | 295 | CONFIG_ALIGNMENT_TRAP=y |
296 | # CONFIG_UACCESS_WITH_MEMCPY is not set | ||
277 | 297 | ||
278 | # | 298 | # |
279 | # Boot options | 299 | # Boot options |
@@ -287,7 +307,24 @@ CONFIG_CMDLINE="" | |||
287 | # | 307 | # |
288 | # CPU Power Management | 308 | # CPU Power Management |
289 | # | 309 | # |
290 | # CONFIG_CPU_IDLE is not set | 310 | CONFIG_CPU_FREQ=y |
311 | CONFIG_CPU_FREQ_TABLE=y | ||
312 | # CONFIG_CPU_FREQ_DEBUG is not set | ||
313 | CONFIG_CPU_FREQ_STAT=y | ||
314 | # CONFIG_CPU_FREQ_STAT_DETAILS is not set | ||
315 | # CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set | ||
316 | # CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set | ||
317 | CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y | ||
318 | # CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set | ||
319 | # CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set | ||
320 | CONFIG_CPU_FREQ_GOV_PERFORMANCE=m | ||
321 | CONFIG_CPU_FREQ_GOV_POWERSAVE=m | ||
322 | CONFIG_CPU_FREQ_GOV_USERSPACE=y | ||
323 | CONFIG_CPU_FREQ_GOV_ONDEMAND=m | ||
324 | # CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set | ||
325 | CONFIG_CPU_IDLE=y | ||
326 | CONFIG_CPU_IDLE_GOV_LADDER=y | ||
327 | CONFIG_CPU_IDLE_GOV_MENU=y | ||
291 | 328 | ||
292 | # | 329 | # |
293 | # Floating point emulation | 330 | # Floating point emulation |
@@ -401,6 +438,7 @@ CONFIG_NETFILTER_ADVANCED=y | |||
401 | # CONFIG_IP6_NF_IPTABLES is not set | 438 | # CONFIG_IP6_NF_IPTABLES is not set |
402 | # CONFIG_IP_DCCP is not set | 439 | # CONFIG_IP_DCCP is not set |
403 | # CONFIG_IP_SCTP is not set | 440 | # CONFIG_IP_SCTP is not set |
441 | # CONFIG_RDS is not set | ||
404 | # CONFIG_TIPC is not set | 442 | # CONFIG_TIPC is not set |
405 | # CONFIG_ATM is not set | 443 | # CONFIG_ATM is not set |
406 | # CONFIG_BRIDGE is not set | 444 | # CONFIG_BRIDGE is not set |
@@ -415,6 +453,7 @@ CONFIG_NETFILTER_ADVANCED=y | |||
415 | # CONFIG_ECONET is not set | 453 | # CONFIG_ECONET is not set |
416 | # CONFIG_WAN_ROUTER is not set | 454 | # CONFIG_WAN_ROUTER is not set |
417 | # CONFIG_PHONET is not set | 455 | # CONFIG_PHONET is not set |
456 | # CONFIG_IEEE802154 is not set | ||
418 | # CONFIG_NET_SCHED is not set | 457 | # CONFIG_NET_SCHED is not set |
419 | # CONFIG_DCB is not set | 458 | # CONFIG_DCB is not set |
420 | 459 | ||
@@ -440,6 +479,7 @@ CONFIG_NETFILTER_ADVANCED=y | |||
440 | # Generic Driver Options | 479 | # Generic Driver Options |
441 | # | 480 | # |
442 | CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" | 481 | CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" |
482 | # CONFIG_DEVTMPFS is not set | ||
443 | CONFIG_STANDALONE=y | 483 | CONFIG_STANDALONE=y |
444 | CONFIG_PREVENT_FIRMWARE_BUILD=y | 484 | CONFIG_PREVENT_FIRMWARE_BUILD=y |
445 | # CONFIG_FW_LOADER is not set | 485 | # CONFIG_FW_LOADER is not set |
@@ -460,6 +500,7 @@ CONFIG_BLK_DEV_RAM_SIZE=32768 | |||
460 | # CONFIG_BLK_DEV_XIP is not set | 500 | # CONFIG_BLK_DEV_XIP is not set |
461 | # CONFIG_CDROM_PKTCDVD is not set | 501 | # CONFIG_CDROM_PKTCDVD is not set |
462 | # CONFIG_ATA_OVER_ETH is not set | 502 | # CONFIG_ATA_OVER_ETH is not set |
503 | # CONFIG_MG_DISK is not set | ||
463 | CONFIG_MISC_DEVICES=y | 504 | CONFIG_MISC_DEVICES=y |
464 | # CONFIG_ICS932S401 is not set | 505 | # CONFIG_ICS932S401 is not set |
465 | # CONFIG_ENCLOSURE_SERVICES is not set | 506 | # CONFIG_ENCLOSURE_SERVICES is not set |
@@ -471,6 +512,7 @@ CONFIG_MISC_DEVICES=y | |||
471 | # | 512 | # |
472 | CONFIG_EEPROM_AT24=y | 513 | CONFIG_EEPROM_AT24=y |
473 | # CONFIG_EEPROM_LEGACY is not set | 514 | # CONFIG_EEPROM_LEGACY is not set |
515 | # CONFIG_EEPROM_MAX6875 is not set | ||
474 | # CONFIG_EEPROM_93CX6 is not set | 516 | # CONFIG_EEPROM_93CX6 is not set |
475 | CONFIG_HAVE_IDE=y | 517 | CONFIG_HAVE_IDE=y |
476 | # CONFIG_IDE is not set | 518 | # CONFIG_IDE is not set |
@@ -494,10 +536,6 @@ CONFIG_BLK_DEV_SD=m | |||
494 | # CONFIG_BLK_DEV_SR is not set | 536 | # CONFIG_BLK_DEV_SR is not set |
495 | # CONFIG_CHR_DEV_SG is not set | 537 | # CONFIG_CHR_DEV_SG is not set |
496 | # CONFIG_CHR_DEV_SCH is not set | 538 | # CONFIG_CHR_DEV_SCH is not set |
497 | |||
498 | # | ||
499 | # Some SCSI devices (e.g. CD jukebox) support multiple LUNs | ||
500 | # | ||
501 | # CONFIG_SCSI_MULTI_LUN is not set | 539 | # CONFIG_SCSI_MULTI_LUN is not set |
502 | # CONFIG_SCSI_CONSTANTS is not set | 540 | # CONFIG_SCSI_CONSTANTS is not set |
503 | # CONFIG_SCSI_LOGGING is not set | 541 | # CONFIG_SCSI_LOGGING is not set |
@@ -522,7 +560,6 @@ CONFIG_SCSI_LOWLEVEL=y | |||
522 | # CONFIG_ATA is not set | 560 | # CONFIG_ATA is not set |
523 | # CONFIG_MD is not set | 561 | # CONFIG_MD is not set |
524 | CONFIG_NETDEVICES=y | 562 | CONFIG_NETDEVICES=y |
525 | CONFIG_COMPAT_NET_DEV_OPS=y | ||
526 | # CONFIG_DUMMY is not set | 563 | # CONFIG_DUMMY is not set |
527 | # CONFIG_BONDING is not set | 564 | # CONFIG_BONDING is not set |
528 | # CONFIG_MACVLAN is not set | 565 | # CONFIG_MACVLAN is not set |
@@ -553,7 +590,7 @@ CONFIG_NET_ETHERNET=y | |||
553 | CONFIG_MII=y | 590 | CONFIG_MII=y |
554 | # CONFIG_AX88796 is not set | 591 | # CONFIG_AX88796 is not set |
555 | # CONFIG_SMC91X is not set | 592 | # CONFIG_SMC91X is not set |
556 | # CONFIG_TI_DAVINCI_EMAC is not set | 593 | CONFIG_TI_DAVINCI_EMAC=y |
557 | # CONFIG_DM9000 is not set | 594 | # CONFIG_DM9000 is not set |
558 | # CONFIG_ETHOC is not set | 595 | # CONFIG_ETHOC is not set |
559 | # CONFIG_SMC911X is not set | 596 | # CONFIG_SMC911X is not set |
@@ -567,12 +604,11 @@ CONFIG_MII=y | |||
567 | # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set | 604 | # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set |
568 | # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set | 605 | # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set |
569 | # CONFIG_B44 is not set | 606 | # CONFIG_B44 is not set |
607 | # CONFIG_KS8842 is not set | ||
608 | # CONFIG_KS8851_MLL is not set | ||
570 | # CONFIG_NETDEV_1000 is not set | 609 | # CONFIG_NETDEV_1000 is not set |
571 | # CONFIG_NETDEV_10000 is not set | 610 | # CONFIG_NETDEV_10000 is not set |
572 | 611 | CONFIG_WLAN=y | |
573 | # | ||
574 | # Wireless LAN | ||
575 | # | ||
576 | # CONFIG_WLAN_PRE80211 is not set | 612 | # CONFIG_WLAN_PRE80211 is not set |
577 | # CONFIG_WLAN_80211 is not set | 613 | # CONFIG_WLAN_80211 is not set |
578 | 614 | ||
@@ -588,6 +624,7 @@ CONFIG_NETPOLL=y | |||
588 | CONFIG_NETPOLL_TRAP=y | 624 | CONFIG_NETPOLL_TRAP=y |
589 | CONFIG_NET_POLL_CONTROLLER=y | 625 | CONFIG_NET_POLL_CONTROLLER=y |
590 | # CONFIG_ISDN is not set | 626 | # CONFIG_ISDN is not set |
627 | # CONFIG_PHONE is not set | ||
591 | 628 | ||
592 | # | 629 | # |
593 | # Input device support | 630 | # Input device support |
@@ -611,23 +648,30 @@ CONFIG_INPUT_EVBUG=m | |||
611 | # Input Device Drivers | 648 | # Input Device Drivers |
612 | # | 649 | # |
613 | CONFIG_INPUT_KEYBOARD=y | 650 | CONFIG_INPUT_KEYBOARD=y |
651 | # CONFIG_KEYBOARD_ADP5588 is not set | ||
614 | CONFIG_KEYBOARD_ATKBD=m | 652 | CONFIG_KEYBOARD_ATKBD=m |
615 | # CONFIG_KEYBOARD_SUNKBD is not set | 653 | # CONFIG_QT2160 is not set |
616 | # CONFIG_KEYBOARD_LKKBD is not set | 654 | # CONFIG_KEYBOARD_LKKBD is not set |
617 | CONFIG_KEYBOARD_XTKBD=m | 655 | CONFIG_KEYBOARD_GPIO=y |
656 | # CONFIG_KEYBOARD_MATRIX is not set | ||
657 | # CONFIG_KEYBOARD_MAX7359 is not set | ||
618 | # CONFIG_KEYBOARD_NEWTON is not set | 658 | # CONFIG_KEYBOARD_NEWTON is not set |
659 | # CONFIG_KEYBOARD_OPENCORES is not set | ||
619 | # CONFIG_KEYBOARD_STOWAWAY is not set | 660 | # CONFIG_KEYBOARD_STOWAWAY is not set |
620 | CONFIG_KEYBOARD_GPIO=y | 661 | # CONFIG_KEYBOARD_SUNKBD is not set |
662 | CONFIG_KEYBOARD_XTKBD=m | ||
621 | # CONFIG_INPUT_MOUSE is not set | 663 | # CONFIG_INPUT_MOUSE is not set |
622 | # CONFIG_INPUT_JOYSTICK is not set | 664 | # CONFIG_INPUT_JOYSTICK is not set |
623 | # CONFIG_INPUT_TABLET is not set | 665 | # CONFIG_INPUT_TABLET is not set |
624 | CONFIG_INPUT_TOUCHSCREEN=y | 666 | CONFIG_INPUT_TOUCHSCREEN=y |
625 | # CONFIG_TOUCHSCREEN_AD7879_I2C is not set | 667 | # CONFIG_TOUCHSCREEN_AD7879_I2C is not set |
626 | # CONFIG_TOUCHSCREEN_AD7879 is not set | 668 | # CONFIG_TOUCHSCREEN_AD7879 is not set |
669 | # CONFIG_TOUCHSCREEN_EETI is not set | ||
627 | # CONFIG_TOUCHSCREEN_FUJITSU is not set | 670 | # CONFIG_TOUCHSCREEN_FUJITSU is not set |
628 | # CONFIG_TOUCHSCREEN_GUNZE is not set | 671 | # CONFIG_TOUCHSCREEN_GUNZE is not set |
629 | # CONFIG_TOUCHSCREEN_ELO is not set | 672 | # CONFIG_TOUCHSCREEN_ELO is not set |
630 | # CONFIG_TOUCHSCREEN_WACOM_W8001 is not set | 673 | # CONFIG_TOUCHSCREEN_WACOM_W8001 is not set |
674 | # CONFIG_TOUCHSCREEN_MCS5000 is not set | ||
631 | # CONFIG_TOUCHSCREEN_MTOUCH is not set | 675 | # CONFIG_TOUCHSCREEN_MTOUCH is not set |
632 | # CONFIG_TOUCHSCREEN_INEXIO is not set | 676 | # CONFIG_TOUCHSCREEN_INEXIO is not set |
633 | # CONFIG_TOUCHSCREEN_MK712 is not set | 677 | # CONFIG_TOUCHSCREEN_MK712 is not set |
@@ -636,6 +680,7 @@ CONFIG_INPUT_TOUCHSCREEN=y | |||
636 | # CONFIG_TOUCHSCREEN_TOUCHWIN is not set | 680 | # CONFIG_TOUCHSCREEN_TOUCHWIN is not set |
637 | # CONFIG_TOUCHSCREEN_TOUCHIT213 is not set | 681 | # CONFIG_TOUCHSCREEN_TOUCHIT213 is not set |
638 | # CONFIG_TOUCHSCREEN_TSC2007 is not set | 682 | # CONFIG_TOUCHSCREEN_TSC2007 is not set |
683 | # CONFIG_TOUCHSCREEN_W90X900 is not set | ||
639 | # CONFIG_INPUT_MISC is not set | 684 | # CONFIG_INPUT_MISC is not set |
640 | 685 | ||
641 | # | 686 | # |
@@ -684,6 +729,7 @@ CONFIG_HW_RANDOM=m | |||
684 | # CONFIG_TCG_TPM is not set | 729 | # CONFIG_TCG_TPM is not set |
685 | CONFIG_I2C=y | 730 | CONFIG_I2C=y |
686 | CONFIG_I2C_BOARDINFO=y | 731 | CONFIG_I2C_BOARDINFO=y |
732 | CONFIG_I2C_COMPAT=y | ||
687 | CONFIG_I2C_CHARDEV=y | 733 | CONFIG_I2C_CHARDEV=y |
688 | CONFIG_I2C_HELPER_AUTO=y | 734 | CONFIG_I2C_HELPER_AUTO=y |
689 | 735 | ||
@@ -695,6 +741,7 @@ CONFIG_I2C_HELPER_AUTO=y | |||
695 | # I2C system bus drivers (mostly embedded / system-on-chip) | 741 | # I2C system bus drivers (mostly embedded / system-on-chip) |
696 | # | 742 | # |
697 | CONFIG_I2C_DAVINCI=y | 743 | CONFIG_I2C_DAVINCI=y |
744 | # CONFIG_I2C_DESIGNWARE is not set | ||
698 | # CONFIG_I2C_GPIO is not set | 745 | # CONFIG_I2C_GPIO is not set |
699 | # CONFIG_I2C_OCORES is not set | 746 | # CONFIG_I2C_OCORES is not set |
700 | # CONFIG_I2C_SIMTEC is not set | 747 | # CONFIG_I2C_SIMTEC is not set |
@@ -715,14 +762,17 @@ CONFIG_I2C_DAVINCI=y | |||
715 | # Miscellaneous I2C Chip support | 762 | # Miscellaneous I2C Chip support |
716 | # | 763 | # |
717 | # CONFIG_DS1682 is not set | 764 | # CONFIG_DS1682 is not set |
718 | # CONFIG_SENSORS_PCA9539 is not set | ||
719 | # CONFIG_SENSORS_MAX6875 is not set | ||
720 | # CONFIG_SENSORS_TSL2550 is not set | 765 | # CONFIG_SENSORS_TSL2550 is not set |
721 | # CONFIG_I2C_DEBUG_CORE is not set | 766 | # CONFIG_I2C_DEBUG_CORE is not set |
722 | # CONFIG_I2C_DEBUG_ALGO is not set | 767 | # CONFIG_I2C_DEBUG_ALGO is not set |
723 | # CONFIG_I2C_DEBUG_BUS is not set | 768 | # CONFIG_I2C_DEBUG_BUS is not set |
724 | # CONFIG_I2C_DEBUG_CHIP is not set | 769 | # CONFIG_I2C_DEBUG_CHIP is not set |
725 | # CONFIG_SPI is not set | 770 | # CONFIG_SPI is not set |
771 | |||
772 | # | ||
773 | # PPS support | ||
774 | # | ||
775 | # CONFIG_PPS is not set | ||
726 | CONFIG_ARCH_REQUIRE_GPIOLIB=y | 776 | CONFIG_ARCH_REQUIRE_GPIOLIB=y |
727 | CONFIG_GPIOLIB=y | 777 | CONFIG_GPIOLIB=y |
728 | # CONFIG_DEBUG_GPIO is not set | 778 | # CONFIG_DEBUG_GPIO is not set |
@@ -736,8 +786,8 @@ CONFIG_GPIOLIB=y | |||
736 | # I2C GPIO expanders: | 786 | # I2C GPIO expanders: |
737 | # | 787 | # |
738 | # CONFIG_GPIO_MAX732X is not set | 788 | # CONFIG_GPIO_MAX732X is not set |
739 | # CONFIG_GPIO_PCA953X is not set | 789 | CONFIG_GPIO_PCA953X=y |
740 | CONFIG_GPIO_PCF857X=m | 790 | CONFIG_GPIO_PCF857X=y |
741 | 791 | ||
742 | # | 792 | # |
743 | # PCI GPIO expanders: | 793 | # PCI GPIO expanders: |
@@ -746,11 +796,14 @@ CONFIG_GPIO_PCF857X=m | |||
746 | # | 796 | # |
747 | # SPI GPIO expanders: | 797 | # SPI GPIO expanders: |
748 | # | 798 | # |
799 | |||
800 | # | ||
801 | # AC97 GPIO expanders: | ||
802 | # | ||
749 | # CONFIG_W1 is not set | 803 | # CONFIG_W1 is not set |
750 | # CONFIG_POWER_SUPPLY is not set | 804 | # CONFIG_POWER_SUPPLY is not set |
751 | # CONFIG_HWMON is not set | 805 | # CONFIG_HWMON is not set |
752 | # CONFIG_THERMAL is not set | 806 | # CONFIG_THERMAL is not set |
753 | # CONFIG_THERMAL_HWMON is not set | ||
754 | CONFIG_WATCHDOG=y | 807 | CONFIG_WATCHDOG=y |
755 | # CONFIG_WATCHDOG_NOWAYOUT is not set | 808 | # CONFIG_WATCHDOG_NOWAYOUT is not set |
756 | 809 | ||
@@ -782,31 +835,56 @@ CONFIG_SSB_POSSIBLE=y | |||
782 | # CONFIG_MFD_TC6393XB is not set | 835 | # CONFIG_MFD_TC6393XB is not set |
783 | # CONFIG_PMIC_DA903X is not set | 836 | # CONFIG_PMIC_DA903X is not set |
784 | # CONFIG_MFD_WM8400 is not set | 837 | # CONFIG_MFD_WM8400 is not set |
838 | # CONFIG_MFD_WM831X is not set | ||
785 | # CONFIG_MFD_WM8350_I2C is not set | 839 | # CONFIG_MFD_WM8350_I2C is not set |
786 | # CONFIG_MFD_PCF50633 is not set | 840 | # CONFIG_MFD_PCF50633 is not set |
787 | 841 | # CONFIG_AB3100_CORE is not set | |
788 | # | 842 | CONFIG_REGULATOR=y |
789 | # Multimedia devices | 843 | # CONFIG_REGULATOR_DEBUG is not set |
790 | # | 844 | # CONFIG_REGULATOR_FIXED_VOLTAGE is not set |
791 | 845 | # CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set | |
792 | # | 846 | # CONFIG_REGULATOR_USERSPACE_CONSUMER is not set |
793 | # Multimedia core support | 847 | # CONFIG_REGULATOR_BQ24022 is not set |
794 | # | 848 | # CONFIG_REGULATOR_MAX1586 is not set |
795 | # CONFIG_VIDEO_DEV is not set | 849 | # CONFIG_REGULATOR_LP3971 is not set |
796 | # CONFIG_DVB_CORE is not set | 850 | # CONFIG_REGULATOR_TPS65023 is not set |
797 | # CONFIG_VIDEO_MEDIA is not set | 851 | CONFIG_REGULATOR_TPS6507X=y |
798 | 852 | # CONFIG_MEDIA_SUPPORT is not set | |
799 | # | ||
800 | # Multimedia drivers | ||
801 | # | ||
802 | # CONFIG_DAB is not set | ||
803 | 853 | ||
804 | # | 854 | # |
805 | # Graphics support | 855 | # Graphics support |
806 | # | 856 | # |
807 | # CONFIG_VGASTATE is not set | 857 | # CONFIG_VGASTATE is not set |
808 | # CONFIG_VIDEO_OUTPUT_CONTROL is not set | 858 | # CONFIG_VIDEO_OUTPUT_CONTROL is not set |
809 | # CONFIG_FB is not set | 859 | CONFIG_FB=y |
860 | # CONFIG_FIRMWARE_EDID is not set | ||
861 | # CONFIG_FB_DDC is not set | ||
862 | # CONFIG_FB_BOOT_VESA_SUPPORT is not set | ||
863 | CONFIG_FB_CFB_FILLRECT=y | ||
864 | CONFIG_FB_CFB_COPYAREA=y | ||
865 | CONFIG_FB_CFB_IMAGEBLIT=y | ||
866 | # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set | ||
867 | # CONFIG_FB_SYS_FILLRECT is not set | ||
868 | # CONFIG_FB_SYS_COPYAREA is not set | ||
869 | # CONFIG_FB_SYS_IMAGEBLIT is not set | ||
870 | # CONFIG_FB_FOREIGN_ENDIAN is not set | ||
871 | # CONFIG_FB_SYS_FOPS is not set | ||
872 | # CONFIG_FB_SVGALIB is not set | ||
873 | # CONFIG_FB_MACMODES is not set | ||
874 | # CONFIG_FB_BACKLIGHT is not set | ||
875 | # CONFIG_FB_MODE_HELPERS is not set | ||
876 | # CONFIG_FB_TILEBLITTING is not set | ||
877 | |||
878 | # | ||
879 | # Frame buffer hardware drivers | ||
880 | # | ||
881 | # CONFIG_FB_S1D13XXX is not set | ||
882 | # CONFIG_FB_DAVINCI is not set | ||
883 | # CONFIG_FB_VIRTUAL is not set | ||
884 | CONFIG_FB_DA8XX=y | ||
885 | # CONFIG_FB_METRONOME is not set | ||
886 | # CONFIG_FB_MB862XX is not set | ||
887 | # CONFIG_FB_BROADSHEET is not set | ||
810 | # CONFIG_BACKLIGHT_LCD_SUPPORT is not set | 888 | # CONFIG_BACKLIGHT_LCD_SUPPORT is not set |
811 | 889 | ||
812 | # | 890 | # |
@@ -819,6 +897,16 @@ CONFIG_SSB_POSSIBLE=y | |||
819 | # | 897 | # |
820 | # CONFIG_VGA_CONSOLE is not set | 898 | # CONFIG_VGA_CONSOLE is not set |
821 | CONFIG_DUMMY_CONSOLE=y | 899 | CONFIG_DUMMY_CONSOLE=y |
900 | CONFIG_FRAMEBUFFER_CONSOLE=y | ||
901 | # CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set | ||
902 | # CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set | ||
903 | # CONFIG_FONTS is not set | ||
904 | CONFIG_FONT_8x8=y | ||
905 | CONFIG_FONT_8x16=y | ||
906 | CONFIG_LOGO=y | ||
907 | CONFIG_LOGO_LINUX_MONO=y | ||
908 | CONFIG_LOGO_LINUX_VGA16=y | ||
909 | CONFIG_LOGO_LINUX_CLUT224=y | ||
822 | CONFIG_SOUND=m | 910 | CONFIG_SOUND=m |
823 | # CONFIG_SOUND_OSS_CORE is not set | 911 | # CONFIG_SOUND_OSS_CORE is not set |
824 | CONFIG_SND=m | 912 | CONFIG_SND=m |
@@ -834,6 +922,11 @@ CONFIG_SND_SUPPORT_OLD_API=y | |||
834 | CONFIG_SND_VERBOSE_PROCFS=y | 922 | CONFIG_SND_VERBOSE_PROCFS=y |
835 | # CONFIG_SND_VERBOSE_PRINTK is not set | 923 | # CONFIG_SND_VERBOSE_PRINTK is not set |
836 | # CONFIG_SND_DEBUG is not set | 924 | # CONFIG_SND_DEBUG is not set |
925 | # CONFIG_SND_RAWMIDI_SEQ is not set | ||
926 | # CONFIG_SND_OPL3_LIB_SEQ is not set | ||
927 | # CONFIG_SND_OPL4_LIB_SEQ is not set | ||
928 | # CONFIG_SND_SBAWE_SEQ is not set | ||
929 | # CONFIG_SND_EMU10K1_SEQ is not set | ||
837 | CONFIG_SND_DRIVERS=y | 930 | CONFIG_SND_DRIVERS=y |
838 | # CONFIG_SND_DUMMY is not set | 931 | # CONFIG_SND_DUMMY is not set |
839 | # CONFIG_SND_MTPAV is not set | 932 | # CONFIG_SND_MTPAV is not set |
@@ -842,6 +935,8 @@ CONFIG_SND_DRIVERS=y | |||
842 | CONFIG_SND_ARM=y | 935 | CONFIG_SND_ARM=y |
843 | CONFIG_SND_SOC=m | 936 | CONFIG_SND_SOC=m |
844 | CONFIG_SND_DAVINCI_SOC=m | 937 | CONFIG_SND_DAVINCI_SOC=m |
938 | # CONFIG_SND_DA830_SOC_EVM is not set | ||
939 | # CONFIG_SND_DA850_SOC_EVM is not set | ||
845 | CONFIG_SND_SOC_I2C_AND_SPI=m | 940 | CONFIG_SND_SOC_I2C_AND_SPI=m |
846 | # CONFIG_SND_SOC_ALL_CODECS is not set | 941 | # CONFIG_SND_SOC_ALL_CODECS is not set |
847 | # CONFIG_SOUND_PRIME is not set | 942 | # CONFIG_SOUND_PRIME is not set |
@@ -849,14 +944,17 @@ CONFIG_SND_SOC_I2C_AND_SPI=m | |||
849 | # CONFIG_USB_SUPPORT is not set | 944 | # CONFIG_USB_SUPPORT is not set |
850 | # CONFIG_MMC is not set | 945 | # CONFIG_MMC is not set |
851 | # CONFIG_MEMSTICK is not set | 946 | # CONFIG_MEMSTICK is not set |
852 | # CONFIG_ACCESSIBILITY is not set | ||
853 | # CONFIG_NEW_LEDS is not set | 947 | # CONFIG_NEW_LEDS is not set |
948 | # CONFIG_ACCESSIBILITY is not set | ||
854 | CONFIG_RTC_LIB=y | 949 | CONFIG_RTC_LIB=y |
855 | # CONFIG_RTC_CLASS is not set | 950 | # CONFIG_RTC_CLASS is not set |
856 | # CONFIG_DMADEVICES is not set | 951 | # CONFIG_DMADEVICES is not set |
857 | # CONFIG_AUXDISPLAY is not set | 952 | # CONFIG_AUXDISPLAY is not set |
858 | # CONFIG_REGULATOR is not set | ||
859 | # CONFIG_UIO is not set | 953 | # CONFIG_UIO is not set |
954 | |||
955 | # | ||
956 | # TI VLYNQ | ||
957 | # | ||
860 | # CONFIG_STAGING is not set | 958 | # CONFIG_STAGING is not set |
861 | 959 | ||
862 | # | 960 | # |
@@ -877,14 +975,17 @@ CONFIG_FS_MBCACHE=y | |||
877 | # CONFIG_REISERFS_FS is not set | 975 | # CONFIG_REISERFS_FS is not set |
878 | # CONFIG_JFS_FS is not set | 976 | # CONFIG_JFS_FS is not set |
879 | # CONFIG_FS_POSIX_ACL is not set | 977 | # CONFIG_FS_POSIX_ACL is not set |
880 | CONFIG_FILE_LOCKING=y | ||
881 | CONFIG_XFS_FS=m | 978 | CONFIG_XFS_FS=m |
882 | # CONFIG_XFS_QUOTA is not set | 979 | # CONFIG_XFS_QUOTA is not set |
883 | # CONFIG_XFS_POSIX_ACL is not set | 980 | # CONFIG_XFS_POSIX_ACL is not set |
884 | # CONFIG_XFS_RT is not set | 981 | # CONFIG_XFS_RT is not set |
885 | # CONFIG_XFS_DEBUG is not set | 982 | # CONFIG_XFS_DEBUG is not set |
983 | # CONFIG_GFS2_FS is not set | ||
886 | # CONFIG_OCFS2_FS is not set | 984 | # CONFIG_OCFS2_FS is not set |
887 | # CONFIG_BTRFS_FS is not set | 985 | # CONFIG_BTRFS_FS is not set |
986 | # CONFIG_NILFS2_FS is not set | ||
987 | CONFIG_FILE_LOCKING=y | ||
988 | CONFIG_FSNOTIFY=y | ||
888 | CONFIG_DNOTIFY=y | 989 | CONFIG_DNOTIFY=y |
889 | CONFIG_INOTIFY=y | 990 | CONFIG_INOTIFY=y |
890 | CONFIG_INOTIFY_USER=y | 991 | CONFIG_INOTIFY_USER=y |
@@ -943,7 +1044,6 @@ CONFIG_MINIX_FS=m | |||
943 | # CONFIG_ROMFS_FS is not set | 1044 | # CONFIG_ROMFS_FS is not set |
944 | # CONFIG_SYSV_FS is not set | 1045 | # CONFIG_SYSV_FS is not set |
945 | # CONFIG_UFS_FS is not set | 1046 | # CONFIG_UFS_FS is not set |
946 | # CONFIG_NILFS2_FS is not set | ||
947 | CONFIG_NETWORK_FILESYSTEMS=y | 1047 | CONFIG_NETWORK_FILESYSTEMS=y |
948 | CONFIG_NFS_FS=y | 1048 | CONFIG_NFS_FS=y |
949 | CONFIG_NFS_V3=y | 1049 | CONFIG_NFS_V3=y |
@@ -1039,6 +1139,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y | |||
1039 | CONFIG_ENABLE_MUST_CHECK=y | 1139 | CONFIG_ENABLE_MUST_CHECK=y |
1040 | CONFIG_FRAME_WARN=1024 | 1140 | CONFIG_FRAME_WARN=1024 |
1041 | # CONFIG_MAGIC_SYSRQ is not set | 1141 | # CONFIG_MAGIC_SYSRQ is not set |
1142 | # CONFIG_STRIP_ASM_SYMS is not set | ||
1042 | # CONFIG_UNUSED_SYMBOLS is not set | 1143 | # CONFIG_UNUSED_SYMBOLS is not set |
1043 | CONFIG_DEBUG_FS=y | 1144 | CONFIG_DEBUG_FS=y |
1044 | # CONFIG_HEADERS_CHECK is not set | 1145 | # CONFIG_HEADERS_CHECK is not set |
@@ -1056,6 +1157,7 @@ CONFIG_TIMER_STATS=y | |||
1056 | # CONFIG_DEBUG_OBJECTS is not set | 1157 | # CONFIG_DEBUG_OBJECTS is not set |
1057 | # CONFIG_SLUB_DEBUG_ON is not set | 1158 | # CONFIG_SLUB_DEBUG_ON is not set |
1058 | # CONFIG_SLUB_STATS is not set | 1159 | # CONFIG_SLUB_STATS is not set |
1160 | # CONFIG_DEBUG_KMEMLEAK is not set | ||
1059 | CONFIG_DEBUG_PREEMPT=y | 1161 | CONFIG_DEBUG_PREEMPT=y |
1060 | CONFIG_DEBUG_RT_MUTEXES=y | 1162 | CONFIG_DEBUG_RT_MUTEXES=y |
1061 | CONFIG_DEBUG_PI_LIST=y | 1163 | CONFIG_DEBUG_PI_LIST=y |
@@ -1076,29 +1178,29 @@ CONFIG_DEBUG_BUGVERBOSE=y | |||
1076 | # CONFIG_DEBUG_LIST is not set | 1178 | # CONFIG_DEBUG_LIST is not set |
1077 | # CONFIG_DEBUG_SG is not set | 1179 | # CONFIG_DEBUG_SG is not set |
1078 | # CONFIG_DEBUG_NOTIFIERS is not set | 1180 | # CONFIG_DEBUG_NOTIFIERS is not set |
1181 | # CONFIG_DEBUG_CREDENTIALS is not set | ||
1079 | # CONFIG_BOOT_PRINTK_DELAY is not set | 1182 | # CONFIG_BOOT_PRINTK_DELAY is not set |
1080 | # CONFIG_RCU_TORTURE_TEST is not set | 1183 | # CONFIG_RCU_TORTURE_TEST is not set |
1081 | # CONFIG_RCU_CPU_STALL_DETECTOR is not set | 1184 | # CONFIG_RCU_CPU_STALL_DETECTOR is not set |
1082 | # CONFIG_BACKTRACE_SELF_TEST is not set | 1185 | # CONFIG_BACKTRACE_SELF_TEST is not set |
1083 | # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set | 1186 | # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set |
1187 | # CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set | ||
1084 | # CONFIG_FAULT_INJECTION is not set | 1188 | # CONFIG_FAULT_INJECTION is not set |
1085 | # CONFIG_LATENCYTOP is not set | 1189 | # CONFIG_LATENCYTOP is not set |
1086 | # CONFIG_SYSCTL_SYSCALL_CHECK is not set | 1190 | # CONFIG_SYSCTL_SYSCALL_CHECK is not set |
1087 | # CONFIG_PAGE_POISONING is not set | 1191 | # CONFIG_PAGE_POISONING is not set |
1088 | CONFIG_HAVE_FUNCTION_TRACER=y | 1192 | CONFIG_HAVE_FUNCTION_TRACER=y |
1089 | CONFIG_TRACING_SUPPORT=y | 1193 | CONFIG_TRACING_SUPPORT=y |
1090 | 1194 | CONFIG_FTRACE=y | |
1091 | # | ||
1092 | # Tracers | ||
1093 | # | ||
1094 | # CONFIG_FUNCTION_TRACER is not set | 1195 | # CONFIG_FUNCTION_TRACER is not set |
1095 | # CONFIG_IRQSOFF_TRACER is not set | 1196 | # CONFIG_IRQSOFF_TRACER is not set |
1096 | # CONFIG_PREEMPT_TRACER is not set | 1197 | # CONFIG_PREEMPT_TRACER is not set |
1097 | # CONFIG_SCHED_TRACER is not set | 1198 | # CONFIG_SCHED_TRACER is not set |
1098 | # CONFIG_CONTEXT_SWITCH_TRACER is not set | 1199 | # CONFIG_ENABLE_DEFAULT_TRACERS is not set |
1099 | # CONFIG_EVENT_TRACER is not set | ||
1100 | # CONFIG_BOOT_TRACER is not set | 1200 | # CONFIG_BOOT_TRACER is not set |
1101 | # CONFIG_TRACE_BRANCH_PROFILING is not set | 1201 | CONFIG_BRANCH_PROFILE_NONE=y |
1202 | # CONFIG_PROFILE_ANNOTATED_BRANCHES is not set | ||
1203 | # CONFIG_PROFILE_ALL_BRANCHES is not set | ||
1102 | # CONFIG_STACK_TRACER is not set | 1204 | # CONFIG_STACK_TRACER is not set |
1103 | # CONFIG_KMEMTRACE is not set | 1205 | # CONFIG_KMEMTRACE is not set |
1104 | # CONFIG_WORKQUEUE_TRACER is not set | 1206 | # CONFIG_WORKQUEUE_TRACER is not set |
@@ -1125,7 +1227,6 @@ CONFIG_CRYPTO=y | |||
1125 | # | 1227 | # |
1126 | # Crypto core or helper | 1228 | # Crypto core or helper |
1127 | # | 1229 | # |
1128 | # CONFIG_CRYPTO_FIPS is not set | ||
1129 | # CONFIG_CRYPTO_MANAGER is not set | 1230 | # CONFIG_CRYPTO_MANAGER is not set |
1130 | # CONFIG_CRYPTO_MANAGER2 is not set | 1231 | # CONFIG_CRYPTO_MANAGER2 is not set |
1131 | # CONFIG_CRYPTO_GF128MUL is not set | 1232 | # CONFIG_CRYPTO_GF128MUL is not set |
@@ -1157,11 +1258,13 @@ CONFIG_CRYPTO=y | |||
1157 | # | 1258 | # |
1158 | # CONFIG_CRYPTO_HMAC is not set | 1259 | # CONFIG_CRYPTO_HMAC is not set |
1159 | # CONFIG_CRYPTO_XCBC is not set | 1260 | # CONFIG_CRYPTO_XCBC is not set |
1261 | # CONFIG_CRYPTO_VMAC is not set | ||
1160 | 1262 | ||
1161 | # | 1263 | # |
1162 | # Digest | 1264 | # Digest |
1163 | # | 1265 | # |
1164 | # CONFIG_CRYPTO_CRC32C is not set | 1266 | # CONFIG_CRYPTO_CRC32C is not set |
1267 | # CONFIG_CRYPTO_GHASH is not set | ||
1165 | # CONFIG_CRYPTO_MD4 is not set | 1268 | # CONFIG_CRYPTO_MD4 is not set |
1166 | # CONFIG_CRYPTO_MD5 is not set | 1269 | # CONFIG_CRYPTO_MD5 is not set |
1167 | # CONFIG_CRYPTO_MICHAEL_MIC is not set | 1270 | # CONFIG_CRYPTO_MICHAEL_MIC is not set |
diff --git a/arch/arm/configs/davinci_all_defconfig b/arch/arm/configs/davinci_all_defconfig index ddffe39d9f87..bd656e8e6e4c 100644 --- a/arch/arm/configs/davinci_all_defconfig +++ b/arch/arm/configs/davinci_all_defconfig | |||
@@ -1,14 +1,13 @@ | |||
1 | # | 1 | # |
2 | # Automatically generated make config: don't edit | 2 | # Automatically generated make config: don't edit |
3 | # Linux kernel version: 2.6.31-rc3-davinci1 | 3 | # Linux kernel version: 2.6.32-rc4 |
4 | # Fri Jul 17 08:26:52 2009 | 4 | # Mon Oct 12 14:13:12 2009 |
5 | # | 5 | # |
6 | CONFIG_ARM=y | 6 | CONFIG_ARM=y |
7 | CONFIG_SYS_SUPPORTS_APM_EMULATION=y | 7 | CONFIG_SYS_SUPPORTS_APM_EMULATION=y |
8 | CONFIG_GENERIC_GPIO=y | 8 | CONFIG_GENERIC_GPIO=y |
9 | CONFIG_GENERIC_TIME=y | 9 | CONFIG_GENERIC_TIME=y |
10 | CONFIG_GENERIC_CLOCKEVENTS=y | 10 | CONFIG_GENERIC_CLOCKEVENTS=y |
11 | CONFIG_MMU=y | ||
12 | CONFIG_GENERIC_HARDIRQS=y | 11 | CONFIG_GENERIC_HARDIRQS=y |
13 | CONFIG_STACKTRACE_SUPPORT=y | 12 | CONFIG_STACKTRACE_SUPPORT=y |
14 | CONFIG_HAVE_LATENCYTOP_SUPPORT=y | 13 | CONFIG_HAVE_LATENCYTOP_SUPPORT=y |
@@ -46,11 +45,12 @@ CONFIG_POSIX_MQUEUE_SYSCTL=y | |||
46 | # | 45 | # |
47 | # RCU Subsystem | 46 | # RCU Subsystem |
48 | # | 47 | # |
49 | CONFIG_CLASSIC_RCU=y | 48 | CONFIG_TREE_RCU=y |
50 | # CONFIG_TREE_RCU is not set | 49 | # CONFIG_TREE_PREEMPT_RCU is not set |
51 | # CONFIG_PREEMPT_RCU is not set | 50 | # CONFIG_RCU_TRACE is not set |
51 | CONFIG_RCU_FANOUT=32 | ||
52 | # CONFIG_RCU_FANOUT_EXACT is not set | ||
52 | # CONFIG_TREE_RCU_TRACE is not set | 53 | # CONFIG_TREE_RCU_TRACE is not set |
53 | # CONFIG_PREEMPT_RCU_TRACE is not set | ||
54 | CONFIG_IKCONFIG=y | 54 | CONFIG_IKCONFIG=y |
55 | CONFIG_IKCONFIG_PROC=y | 55 | CONFIG_IKCONFIG_PROC=y |
56 | CONFIG_LOG_BUF_SHIFT=14 | 56 | CONFIG_LOG_BUF_SHIFT=14 |
@@ -91,17 +91,15 @@ CONFIG_SHMEM=y | |||
91 | CONFIG_AIO=y | 91 | CONFIG_AIO=y |
92 | 92 | ||
93 | # | 93 | # |
94 | # Performance Counters | 94 | # Kernel Performance Events And Counters |
95 | # | 95 | # |
96 | CONFIG_VM_EVENT_COUNTERS=y | 96 | CONFIG_VM_EVENT_COUNTERS=y |
97 | CONFIG_SLUB_DEBUG=y | 97 | CONFIG_SLUB_DEBUG=y |
98 | # CONFIG_STRIP_ASM_SYMS is not set | ||
99 | CONFIG_COMPAT_BRK=y | 98 | CONFIG_COMPAT_BRK=y |
100 | # CONFIG_SLAB is not set | 99 | # CONFIG_SLAB is not set |
101 | CONFIG_SLUB=y | 100 | CONFIG_SLUB=y |
102 | # CONFIG_SLOB is not set | 101 | # CONFIG_SLOB is not set |
103 | # CONFIG_PROFILING is not set | 102 | # CONFIG_PROFILING is not set |
104 | # CONFIG_MARKERS is not set | ||
105 | CONFIG_HAVE_OPROFILE=y | 103 | CONFIG_HAVE_OPROFILE=y |
106 | # CONFIG_KPROBES is not set | 104 | # CONFIG_KPROBES is not set |
107 | CONFIG_HAVE_KPROBES=y | 105 | CONFIG_HAVE_KPROBES=y |
@@ -145,6 +143,7 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" | |||
145 | # | 143 | # |
146 | # System Type | 144 | # System Type |
147 | # | 145 | # |
146 | CONFIG_MMU=y | ||
148 | # CONFIG_ARCH_AAEC2000 is not set | 147 | # CONFIG_ARCH_AAEC2000 is not set |
149 | # CONFIG_ARCH_INTEGRATOR is not set | 148 | # CONFIG_ARCH_INTEGRATOR is not set |
150 | # CONFIG_ARCH_REALVIEW is not set | 149 | # CONFIG_ARCH_REALVIEW is not set |
@@ -159,6 +158,7 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" | |||
159 | # CONFIG_ARCH_STMP3XXX is not set | 158 | # CONFIG_ARCH_STMP3XXX is not set |
160 | # CONFIG_ARCH_NETX is not set | 159 | # CONFIG_ARCH_NETX is not set |
161 | # CONFIG_ARCH_H720X is not set | 160 | # CONFIG_ARCH_H720X is not set |
161 | # CONFIG_ARCH_NOMADIK is not set | ||
162 | # CONFIG_ARCH_IOP13XX is not set | 162 | # CONFIG_ARCH_IOP13XX is not set |
163 | # CONFIG_ARCH_IOP32X is not set | 163 | # CONFIG_ARCH_IOP32X is not set |
164 | # CONFIG_ARCH_IOP33X is not set | 164 | # CONFIG_ARCH_IOP33X is not set |
@@ -181,11 +181,13 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" | |||
181 | # CONFIG_ARCH_SA1100 is not set | 181 | # CONFIG_ARCH_SA1100 is not set |
182 | # CONFIG_ARCH_S3C2410 is not set | 182 | # CONFIG_ARCH_S3C2410 is not set |
183 | # CONFIG_ARCH_S3C64XX is not set | 183 | # CONFIG_ARCH_S3C64XX is not set |
184 | # CONFIG_ARCH_S5PC1XX is not set | ||
184 | # CONFIG_ARCH_SHARK is not set | 185 | # CONFIG_ARCH_SHARK is not set |
185 | # CONFIG_ARCH_LH7A40X is not set | 186 | # CONFIG_ARCH_LH7A40X is not set |
186 | # CONFIG_ARCH_U300 is not set | 187 | # CONFIG_ARCH_U300 is not set |
187 | CONFIG_ARCH_DAVINCI=y | 188 | CONFIG_ARCH_DAVINCI=y |
188 | # CONFIG_ARCH_OMAP is not set | 189 | # CONFIG_ARCH_OMAP is not set |
190 | # CONFIG_ARCH_BCMRING is not set | ||
189 | CONFIG_AINTC=y | 191 | CONFIG_AINTC=y |
190 | CONFIG_ARCH_DAVINCI_DMx=y | 192 | CONFIG_ARCH_DAVINCI_DMx=y |
191 | 193 | ||
@@ -208,6 +210,7 @@ CONFIG_ARCH_DAVINCI_DM365=y | |||
208 | # | 210 | # |
209 | CONFIG_MACH_DAVINCI_EVM=y | 211 | CONFIG_MACH_DAVINCI_EVM=y |
210 | CONFIG_MACH_SFFSDR=y | 212 | CONFIG_MACH_SFFSDR=y |
213 | CONFIG_MACH_NEUROS_OSD2=y | ||
211 | CONFIG_MACH_DAVINCI_DM355_EVM=y | 214 | CONFIG_MACH_DAVINCI_DM355_EVM=y |
212 | CONFIG_MACH_DM355_LEOPARD=y | 215 | CONFIG_MACH_DM355_LEOPARD=y |
213 | CONFIG_MACH_DAVINCI_DM6467_EVM=y | 216 | CONFIG_MACH_DAVINCI_DM6467_EVM=y |
@@ -224,7 +227,7 @@ CONFIG_CPU_32=y | |||
224 | CONFIG_CPU_ARM926T=y | 227 | CONFIG_CPU_ARM926T=y |
225 | CONFIG_CPU_32v5=y | 228 | CONFIG_CPU_32v5=y |
226 | CONFIG_CPU_ABRT_EV5TJ=y | 229 | CONFIG_CPU_ABRT_EV5TJ=y |
227 | CONFIG_CPU_PABRT_NOIFAR=y | 230 | CONFIG_CPU_PABRT_LEGACY=y |
228 | CONFIG_CPU_CACHE_VIVT=y | 231 | CONFIG_CPU_CACHE_VIVT=y |
229 | CONFIG_CPU_COPY_V4WB=y | 232 | CONFIG_CPU_COPY_V4WB=y |
230 | CONFIG_CPU_TLB_V4WBI=y | 233 | CONFIG_CPU_TLB_V4WBI=y |
@@ -239,6 +242,7 @@ CONFIG_ARM_THUMB=y | |||
239 | # CONFIG_CPU_DCACHE_DISABLE is not set | 242 | # CONFIG_CPU_DCACHE_DISABLE is not set |
240 | # CONFIG_CPU_DCACHE_WRITETHROUGH is not set | 243 | # CONFIG_CPU_DCACHE_WRITETHROUGH is not set |
241 | # CONFIG_CPU_CACHE_ROUND_ROBIN is not set | 244 | # CONFIG_CPU_CACHE_ROUND_ROBIN is not set |
245 | CONFIG_ARM_L1_CACHE_SHIFT=5 | ||
242 | CONFIG_COMMON_CLKDEV=y | 246 | CONFIG_COMMON_CLKDEV=y |
243 | 247 | ||
244 | # | 248 | # |
@@ -259,6 +263,8 @@ CONFIG_VMSPLIT_3G=y | |||
259 | # CONFIG_VMSPLIT_2G is not set | 263 | # CONFIG_VMSPLIT_2G is not set |
260 | # CONFIG_VMSPLIT_1G is not set | 264 | # CONFIG_VMSPLIT_1G is not set |
261 | CONFIG_PAGE_OFFSET=0xC0000000 | 265 | CONFIG_PAGE_OFFSET=0xC0000000 |
266 | # CONFIG_PREEMPT_NONE is not set | ||
267 | # CONFIG_PREEMPT_VOLUNTARY is not set | ||
262 | CONFIG_PREEMPT=y | 268 | CONFIG_PREEMPT=y |
263 | CONFIG_HZ=100 | 269 | CONFIG_HZ=100 |
264 | CONFIG_AEABI=y | 270 | CONFIG_AEABI=y |
@@ -280,6 +286,7 @@ CONFIG_BOUNCE=y | |||
280 | CONFIG_VIRT_TO_BUS=y | 286 | CONFIG_VIRT_TO_BUS=y |
281 | CONFIG_HAVE_MLOCK=y | 287 | CONFIG_HAVE_MLOCK=y |
282 | CONFIG_HAVE_MLOCKED_PAGE_BIT=y | 288 | CONFIG_HAVE_MLOCKED_PAGE_BIT=y |
289 | # CONFIG_KSM is not set | ||
283 | CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 | 290 | CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 |
284 | CONFIG_LEDS=y | 291 | CONFIG_LEDS=y |
285 | # CONFIG_LEDS_CPU is not set | 292 | # CONFIG_LEDS_CPU is not set |
@@ -412,6 +419,7 @@ CONFIG_NETFILTER_ADVANCED=y | |||
412 | # CONFIG_IP6_NF_IPTABLES is not set | 419 | # CONFIG_IP6_NF_IPTABLES is not set |
413 | # CONFIG_IP_DCCP is not set | 420 | # CONFIG_IP_DCCP is not set |
414 | # CONFIG_IP_SCTP is not set | 421 | # CONFIG_IP_SCTP is not set |
422 | # CONFIG_RDS is not set | ||
415 | # CONFIG_TIPC is not set | 423 | # CONFIG_TIPC is not set |
416 | # CONFIG_ATM is not set | 424 | # CONFIG_ATM is not set |
417 | # CONFIG_BRIDGE is not set | 425 | # CONFIG_BRIDGE is not set |
@@ -452,6 +460,7 @@ CONFIG_NETFILTER_ADVANCED=y | |||
452 | # Generic Driver Options | 460 | # Generic Driver Options |
453 | # | 461 | # |
454 | CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" | 462 | CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" |
463 | # CONFIG_DEVTMPFS is not set | ||
455 | CONFIG_STANDALONE=y | 464 | CONFIG_STANDALONE=y |
456 | CONFIG_PREVENT_FIRMWARE_BUILD=y | 465 | CONFIG_PREVENT_FIRMWARE_BUILD=y |
457 | # CONFIG_FW_LOADER is not set | 466 | # CONFIG_FW_LOADER is not set |
@@ -461,9 +470,9 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y | |||
461 | # CONFIG_CONNECTOR is not set | 470 | # CONFIG_CONNECTOR is not set |
462 | CONFIG_MTD=m | 471 | CONFIG_MTD=m |
463 | # CONFIG_MTD_DEBUG is not set | 472 | # CONFIG_MTD_DEBUG is not set |
473 | # CONFIG_MTD_TESTS is not set | ||
464 | # CONFIG_MTD_CONCAT is not set | 474 | # CONFIG_MTD_CONCAT is not set |
465 | CONFIG_MTD_PARTITIONS=y | 475 | CONFIG_MTD_PARTITIONS=y |
466 | # CONFIG_MTD_TESTS is not set | ||
467 | # CONFIG_MTD_REDBOOT_PARTS is not set | 476 | # CONFIG_MTD_REDBOOT_PARTS is not set |
468 | # CONFIG_MTD_AFS_PARTS is not set | 477 | # CONFIG_MTD_AFS_PARTS is not set |
469 | # CONFIG_MTD_AR7_PARTS is not set | 478 | # CONFIG_MTD_AR7_PARTS is not set |
@@ -499,7 +508,7 @@ CONFIG_MTD_CFI_I1=y | |||
499 | CONFIG_MTD_CFI_I2=y | 508 | CONFIG_MTD_CFI_I2=y |
500 | # CONFIG_MTD_CFI_I4 is not set | 509 | # CONFIG_MTD_CFI_I4 is not set |
501 | # CONFIG_MTD_CFI_I8 is not set | 510 | # CONFIG_MTD_CFI_I8 is not set |
502 | # CONFIG_MTD_CFI_INTELEXT is not set | 511 | CONFIG_MTD_CFI_INTELEXT=m |
503 | CONFIG_MTD_CFI_AMDSTD=m | 512 | CONFIG_MTD_CFI_AMDSTD=m |
504 | # CONFIG_MTD_CFI_STAA is not set | 513 | # CONFIG_MTD_CFI_STAA is not set |
505 | CONFIG_MTD_CFI_UTIL=m | 514 | CONFIG_MTD_CFI_UTIL=m |
@@ -694,12 +703,10 @@ CONFIG_DM9000_DEBUGLEVEL=4 | |||
694 | # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set | 703 | # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set |
695 | # CONFIG_B44 is not set | 704 | # CONFIG_B44 is not set |
696 | # CONFIG_KS8842 is not set | 705 | # CONFIG_KS8842 is not set |
706 | # CONFIG_KS8851_MLL is not set | ||
697 | # CONFIG_NETDEV_1000 is not set | 707 | # CONFIG_NETDEV_1000 is not set |
698 | # CONFIG_NETDEV_10000 is not set | 708 | # CONFIG_NETDEV_10000 is not set |
699 | 709 | CONFIG_WLAN=y | |
700 | # | ||
701 | # Wireless LAN | ||
702 | # | ||
703 | # CONFIG_WLAN_PRE80211 is not set | 710 | # CONFIG_WLAN_PRE80211 is not set |
704 | # CONFIG_WLAN_80211 is not set | 711 | # CONFIG_WLAN_80211 is not set |
705 | 712 | ||
@@ -734,6 +741,7 @@ CONFIG_NETPOLL=y | |||
734 | CONFIG_NETPOLL_TRAP=y | 741 | CONFIG_NETPOLL_TRAP=y |
735 | CONFIG_NET_POLL_CONTROLLER=y | 742 | CONFIG_NET_POLL_CONTROLLER=y |
736 | # CONFIG_ISDN is not set | 743 | # CONFIG_ISDN is not set |
744 | # CONFIG_PHONE is not set | ||
737 | 745 | ||
738 | # | 746 | # |
739 | # Input device support | 747 | # Input device support |
@@ -745,10 +753,7 @@ CONFIG_INPUT=y | |||
745 | # | 753 | # |
746 | # Userland interfaces | 754 | # Userland interfaces |
747 | # | 755 | # |
748 | CONFIG_INPUT_MOUSEDEV=m | 756 | # CONFIG_INPUT_MOUSEDEV is not set |
749 | CONFIG_INPUT_MOUSEDEV_PSAUX=y | ||
750 | CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 | ||
751 | CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 | ||
752 | # CONFIG_INPUT_JOYDEV is not set | 757 | # CONFIG_INPUT_JOYDEV is not set |
753 | CONFIG_INPUT_EVDEV=m | 758 | CONFIG_INPUT_EVDEV=m |
754 | CONFIG_INPUT_EVBUG=m | 759 | CONFIG_INPUT_EVBUG=m |
@@ -757,12 +762,16 @@ CONFIG_INPUT_EVBUG=m | |||
757 | # Input Device Drivers | 762 | # Input Device Drivers |
758 | # | 763 | # |
759 | CONFIG_INPUT_KEYBOARD=y | 764 | CONFIG_INPUT_KEYBOARD=y |
765 | # CONFIG_KEYBOARD_ADP5588 is not set | ||
760 | CONFIG_KEYBOARD_ATKBD=m | 766 | CONFIG_KEYBOARD_ATKBD=m |
767 | # CONFIG_QT2160 is not set | ||
761 | # CONFIG_KEYBOARD_LKKBD is not set | 768 | # CONFIG_KEYBOARD_LKKBD is not set |
762 | CONFIG_KEYBOARD_GPIO=y | 769 | CONFIG_KEYBOARD_GPIO=y |
763 | # CONFIG_KEYBOARD_MATRIX is not set | 770 | # CONFIG_KEYBOARD_MATRIX is not set |
764 | # CONFIG_KEYBOARD_LM8323 is not set | 771 | # CONFIG_KEYBOARD_LM8323 is not set |
772 | # CONFIG_KEYBOARD_MAX7359 is not set | ||
765 | # CONFIG_KEYBOARD_NEWTON is not set | 773 | # CONFIG_KEYBOARD_NEWTON is not set |
774 | # CONFIG_KEYBOARD_OPENCORES is not set | ||
766 | # CONFIG_KEYBOARD_STOWAWAY is not set | 775 | # CONFIG_KEYBOARD_STOWAWAY is not set |
767 | # CONFIG_KEYBOARD_SUNKBD is not set | 776 | # CONFIG_KEYBOARD_SUNKBD is not set |
768 | CONFIG_KEYBOARD_XTKBD=m | 777 | CONFIG_KEYBOARD_XTKBD=m |
@@ -777,6 +786,7 @@ CONFIG_INPUT_TOUCHSCREEN=y | |||
777 | # CONFIG_TOUCHSCREEN_GUNZE is not set | 786 | # CONFIG_TOUCHSCREEN_GUNZE is not set |
778 | # CONFIG_TOUCHSCREEN_ELO is not set | 787 | # CONFIG_TOUCHSCREEN_ELO is not set |
779 | # CONFIG_TOUCHSCREEN_WACOM_W8001 is not set | 788 | # CONFIG_TOUCHSCREEN_WACOM_W8001 is not set |
789 | # CONFIG_TOUCHSCREEN_MCS5000 is not set | ||
780 | # CONFIG_TOUCHSCREEN_MTOUCH is not set | 790 | # CONFIG_TOUCHSCREEN_MTOUCH is not set |
781 | # CONFIG_TOUCHSCREEN_INEXIO is not set | 791 | # CONFIG_TOUCHSCREEN_INEXIO is not set |
782 | # CONFIG_TOUCHSCREEN_MK712 is not set | 792 | # CONFIG_TOUCHSCREEN_MK712 is not set |
@@ -787,7 +797,17 @@ CONFIG_INPUT_TOUCHSCREEN=y | |||
787 | # CONFIG_TOUCHSCREEN_TOUCHIT213 is not set | 797 | # CONFIG_TOUCHSCREEN_TOUCHIT213 is not set |
788 | # CONFIG_TOUCHSCREEN_TSC2007 is not set | 798 | # CONFIG_TOUCHSCREEN_TSC2007 is not set |
789 | # CONFIG_TOUCHSCREEN_W90X900 is not set | 799 | # CONFIG_TOUCHSCREEN_W90X900 is not set |
790 | # CONFIG_INPUT_MISC is not set | 800 | CONFIG_INPUT_MISC=y |
801 | # CONFIG_INPUT_ATI_REMOTE is not set | ||
802 | # CONFIG_INPUT_ATI_REMOTE2 is not set | ||
803 | # CONFIG_INPUT_KEYSPAN_REMOTE is not set | ||
804 | # CONFIG_INPUT_POWERMATE is not set | ||
805 | # CONFIG_INPUT_YEALINK is not set | ||
806 | # CONFIG_INPUT_CM109 is not set | ||
807 | # CONFIG_INPUT_UINPUT is not set | ||
808 | # CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set | ||
809 | CONFIG_INPUT_DM355EVM=m | ||
810 | CONFIG_INPUT_DM365EVM=m | ||
791 | 811 | ||
792 | # | 812 | # |
793 | # Hardware I/O ports | 813 | # Hardware I/O ports |
@@ -828,13 +848,13 @@ CONFIG_UNIX98_PTYS=y | |||
828 | CONFIG_LEGACY_PTYS=y | 848 | CONFIG_LEGACY_PTYS=y |
829 | CONFIG_LEGACY_PTY_COUNT=256 | 849 | CONFIG_LEGACY_PTY_COUNT=256 |
830 | # CONFIG_IPMI_HANDLER is not set | 850 | # CONFIG_IPMI_HANDLER is not set |
831 | CONFIG_HW_RANDOM=m | 851 | # CONFIG_HW_RANDOM is not set |
832 | # CONFIG_HW_RANDOM_TIMERIOMEM is not set | ||
833 | # CONFIG_R3964 is not set | 852 | # CONFIG_R3964 is not set |
834 | # CONFIG_RAW_DRIVER is not set | 853 | # CONFIG_RAW_DRIVER is not set |
835 | # CONFIG_TCG_TPM is not set | 854 | # CONFIG_TCG_TPM is not set |
836 | CONFIG_I2C=y | 855 | CONFIG_I2C=y |
837 | CONFIG_I2C_BOARDINFO=y | 856 | CONFIG_I2C_BOARDINFO=y |
857 | CONFIG_I2C_COMPAT=y | ||
838 | CONFIG_I2C_CHARDEV=y | 858 | CONFIG_I2C_CHARDEV=y |
839 | CONFIG_I2C_HELPER_AUTO=y | 859 | CONFIG_I2C_HELPER_AUTO=y |
840 | 860 | ||
@@ -868,13 +888,17 @@ CONFIG_I2C_DAVINCI=y | |||
868 | # Miscellaneous I2C Chip support | 888 | # Miscellaneous I2C Chip support |
869 | # | 889 | # |
870 | # CONFIG_DS1682 is not set | 890 | # CONFIG_DS1682 is not set |
871 | # CONFIG_SENSORS_PCA9539 is not set | ||
872 | # CONFIG_SENSORS_TSL2550 is not set | 891 | # CONFIG_SENSORS_TSL2550 is not set |
873 | # CONFIG_I2C_DEBUG_CORE is not set | 892 | # CONFIG_I2C_DEBUG_CORE is not set |
874 | # CONFIG_I2C_DEBUG_ALGO is not set | 893 | # CONFIG_I2C_DEBUG_ALGO is not set |
875 | # CONFIG_I2C_DEBUG_BUS is not set | 894 | # CONFIG_I2C_DEBUG_BUS is not set |
876 | # CONFIG_I2C_DEBUG_CHIP is not set | 895 | # CONFIG_I2C_DEBUG_CHIP is not set |
877 | # CONFIG_SPI is not set | 896 | # CONFIG_SPI is not set |
897 | |||
898 | # | ||
899 | # PPS support | ||
900 | # | ||
901 | # CONFIG_PPS is not set | ||
878 | CONFIG_ARCH_REQUIRE_GPIOLIB=y | 902 | CONFIG_ARCH_REQUIRE_GPIOLIB=y |
879 | CONFIG_GPIOLIB=y | 903 | CONFIG_GPIOLIB=y |
880 | # CONFIG_DEBUG_GPIO is not set | 904 | # CONFIG_DEBUG_GPIO is not set |
@@ -889,7 +913,7 @@ CONFIG_GPIOLIB=y | |||
889 | # | 913 | # |
890 | # CONFIG_GPIO_MAX732X is not set | 914 | # CONFIG_GPIO_MAX732X is not set |
891 | # CONFIG_GPIO_PCA953X is not set | 915 | # CONFIG_GPIO_PCA953X is not set |
892 | CONFIG_GPIO_PCF857X=m | 916 | CONFIG_GPIO_PCF857X=y |
893 | 917 | ||
894 | # | 918 | # |
895 | # PCI GPIO expanders: | 919 | # PCI GPIO expanders: |
@@ -898,10 +922,19 @@ CONFIG_GPIO_PCF857X=m | |||
898 | # | 922 | # |
899 | # SPI GPIO expanders: | 923 | # SPI GPIO expanders: |
900 | # | 924 | # |
925 | |||
926 | # | ||
927 | # AC97 GPIO expanders: | ||
928 | # | ||
901 | # CONFIG_W1 is not set | 929 | # CONFIG_W1 is not set |
902 | # CONFIG_POWER_SUPPLY is not set | 930 | # CONFIG_POWER_SUPPLY is not set |
903 | CONFIG_HWMON=y | 931 | CONFIG_HWMON=y |
904 | # CONFIG_HWMON_VID is not set | 932 | # CONFIG_HWMON_VID is not set |
933 | # CONFIG_HWMON_DEBUG_CHIP is not set | ||
934 | |||
935 | # | ||
936 | # Native drivers | ||
937 | # | ||
905 | # CONFIG_SENSORS_AD7414 is not set | 938 | # CONFIG_SENSORS_AD7414 is not set |
906 | # CONFIG_SENSORS_AD7418 is not set | 939 | # CONFIG_SENSORS_AD7418 is not set |
907 | # CONFIG_SENSORS_ADM1021 is not set | 940 | # CONFIG_SENSORS_ADM1021 is not set |
@@ -950,6 +983,7 @@ CONFIG_HWMON=y | |||
950 | # CONFIG_SENSORS_ADS7828 is not set | 983 | # CONFIG_SENSORS_ADS7828 is not set |
951 | # CONFIG_SENSORS_THMC50 is not set | 984 | # CONFIG_SENSORS_THMC50 is not set |
952 | # CONFIG_SENSORS_TMP401 is not set | 985 | # CONFIG_SENSORS_TMP401 is not set |
986 | # CONFIG_SENSORS_TMP421 is not set | ||
953 | # CONFIG_SENSORS_VT1211 is not set | 987 | # CONFIG_SENSORS_VT1211 is not set |
954 | # CONFIG_SENSORS_W83781D is not set | 988 | # CONFIG_SENSORS_W83781D is not set |
955 | # CONFIG_SENSORS_W83791D is not set | 989 | # CONFIG_SENSORS_W83791D is not set |
@@ -959,9 +993,7 @@ CONFIG_HWMON=y | |||
959 | # CONFIG_SENSORS_W83L786NG is not set | 993 | # CONFIG_SENSORS_W83L786NG is not set |
960 | # CONFIG_SENSORS_W83627HF is not set | 994 | # CONFIG_SENSORS_W83627HF is not set |
961 | # CONFIG_SENSORS_W83627EHF is not set | 995 | # CONFIG_SENSORS_W83627EHF is not set |
962 | # CONFIG_HWMON_DEBUG_CHIP is not set | ||
963 | # CONFIG_THERMAL is not set | 996 | # CONFIG_THERMAL is not set |
964 | # CONFIG_THERMAL_HWMON is not set | ||
965 | CONFIG_WATCHDOG=y | 997 | CONFIG_WATCHDOG=y |
966 | # CONFIG_WATCHDOG_NOWAYOUT is not set | 998 | # CONFIG_WATCHDOG_NOWAYOUT is not set |
967 | 999 | ||
@@ -988,7 +1020,7 @@ CONFIG_SSB_POSSIBLE=y | |||
988 | # CONFIG_MFD_CORE is not set | 1020 | # CONFIG_MFD_CORE is not set |
989 | # CONFIG_MFD_SM501 is not set | 1021 | # CONFIG_MFD_SM501 is not set |
990 | # CONFIG_MFD_ASIC3 is not set | 1022 | # CONFIG_MFD_ASIC3 is not set |
991 | # CONFIG_MFD_DM355EVM_MSP is not set | 1023 | CONFIG_MFD_DM355EVM_MSP=y |
992 | # CONFIG_HTC_EGPIO is not set | 1024 | # CONFIG_HTC_EGPIO is not set |
993 | # CONFIG_HTC_PASIC3 is not set | 1025 | # CONFIG_HTC_PASIC3 is not set |
994 | # CONFIG_TPS65010 is not set | 1026 | # CONFIG_TPS65010 is not set |
@@ -999,9 +1031,11 @@ CONFIG_SSB_POSSIBLE=y | |||
999 | # CONFIG_MFD_TC6393XB is not set | 1031 | # CONFIG_MFD_TC6393XB is not set |
1000 | # CONFIG_PMIC_DA903X is not set | 1032 | # CONFIG_PMIC_DA903X is not set |
1001 | # CONFIG_MFD_WM8400 is not set | 1033 | # CONFIG_MFD_WM8400 is not set |
1034 | # CONFIG_MFD_WM831X is not set | ||
1002 | # CONFIG_MFD_WM8350_I2C is not set | 1035 | # CONFIG_MFD_WM8350_I2C is not set |
1003 | # CONFIG_MFD_PCF50633 is not set | 1036 | # CONFIG_MFD_PCF50633 is not set |
1004 | # CONFIG_AB3100_CORE is not set | 1037 | # CONFIG_AB3100_CORE is not set |
1038 | # CONFIG_REGULATOR is not set | ||
1005 | # CONFIG_MEDIA_SUPPORT is not set | 1039 | # CONFIG_MEDIA_SUPPORT is not set |
1006 | 1040 | ||
1007 | # | 1041 | # |
@@ -1013,9 +1047,9 @@ CONFIG_FB=y | |||
1013 | CONFIG_FIRMWARE_EDID=y | 1047 | CONFIG_FIRMWARE_EDID=y |
1014 | # CONFIG_FB_DDC is not set | 1048 | # CONFIG_FB_DDC is not set |
1015 | # CONFIG_FB_BOOT_VESA_SUPPORT is not set | 1049 | # CONFIG_FB_BOOT_VESA_SUPPORT is not set |
1016 | # CONFIG_FB_CFB_FILLRECT is not set | 1050 | CONFIG_FB_CFB_FILLRECT=y |
1017 | # CONFIG_FB_CFB_COPYAREA is not set | 1051 | CONFIG_FB_CFB_COPYAREA=y |
1018 | # CONFIG_FB_CFB_IMAGEBLIT is not set | 1052 | CONFIG_FB_CFB_IMAGEBLIT=y |
1019 | # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set | 1053 | # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set |
1020 | # CONFIG_FB_SYS_FILLRECT is not set | 1054 | # CONFIG_FB_SYS_FILLRECT is not set |
1021 | # CONFIG_FB_SYS_COPYAREA is not set | 1055 | # CONFIG_FB_SYS_COPYAREA is not set |
@@ -1032,6 +1066,7 @@ CONFIG_FIRMWARE_EDID=y | |||
1032 | # Frame buffer hardware drivers | 1066 | # Frame buffer hardware drivers |
1033 | # | 1067 | # |
1034 | # CONFIG_FB_S1D13XXX is not set | 1068 | # CONFIG_FB_S1D13XXX is not set |
1069 | CONFIG_FB_DAVINCI=y | ||
1035 | # CONFIG_FB_VIRTUAL is not set | 1070 | # CONFIG_FB_VIRTUAL is not set |
1036 | # CONFIG_FB_METRONOME is not set | 1071 | # CONFIG_FB_METRONOME is not set |
1037 | # CONFIG_FB_MB862XX is not set | 1072 | # CONFIG_FB_MB862XX is not set |
@@ -1101,7 +1136,6 @@ CONFIG_SND_SOC_TLV320AIC3X=m | |||
1101 | # CONFIG_SOUND_PRIME is not set | 1136 | # CONFIG_SOUND_PRIME is not set |
1102 | CONFIG_HID_SUPPORT=y | 1137 | CONFIG_HID_SUPPORT=y |
1103 | CONFIG_HID=m | 1138 | CONFIG_HID=m |
1104 | # CONFIG_HID_DEBUG is not set | ||
1105 | # CONFIG_HIDRAW is not set | 1139 | # CONFIG_HIDRAW is not set |
1106 | 1140 | ||
1107 | # | 1141 | # |
@@ -1130,6 +1164,7 @@ CONFIG_HID_CYPRESS=m | |||
1130 | CONFIG_HID_EZKEY=m | 1164 | CONFIG_HID_EZKEY=m |
1131 | # CONFIG_HID_KYE is not set | 1165 | # CONFIG_HID_KYE is not set |
1132 | CONFIG_HID_GYRATION=m | 1166 | CONFIG_HID_GYRATION=m |
1167 | # CONFIG_HID_TWINHAN is not set | ||
1133 | # CONFIG_HID_KENSINGTON is not set | 1168 | # CONFIG_HID_KENSINGTON is not set |
1134 | CONFIG_HID_LOGITECH=m | 1169 | CONFIG_HID_LOGITECH=m |
1135 | # CONFIG_LOGITECH_FF is not set | 1170 | # CONFIG_LOGITECH_FF is not set |
@@ -1176,6 +1211,7 @@ CONFIG_USB_MON=m | |||
1176 | # CONFIG_USB_OXU210HP_HCD is not set | 1211 | # CONFIG_USB_OXU210HP_HCD is not set |
1177 | # CONFIG_USB_ISP116X_HCD is not set | 1212 | # CONFIG_USB_ISP116X_HCD is not set |
1178 | # CONFIG_USB_ISP1760_HCD is not set | 1213 | # CONFIG_USB_ISP1760_HCD is not set |
1214 | # CONFIG_USB_ISP1362_HCD is not set | ||
1179 | # CONFIG_USB_SL811_HCD is not set | 1215 | # CONFIG_USB_SL811_HCD is not set |
1180 | # CONFIG_USB_R8A66597_HCD is not set | 1216 | # CONFIG_USB_R8A66597_HCD is not set |
1181 | # CONFIG_USB_HWA_HCD is not set | 1217 | # CONFIG_USB_HWA_HCD is not set |
@@ -1269,6 +1305,7 @@ CONFIG_USB_GADGET_SELECTED=y | |||
1269 | # CONFIG_USB_GADGET_LH7A40X is not set | 1305 | # CONFIG_USB_GADGET_LH7A40X is not set |
1270 | # CONFIG_USB_GADGET_OMAP is not set | 1306 | # CONFIG_USB_GADGET_OMAP is not set |
1271 | # CONFIG_USB_GADGET_PXA25X is not set | 1307 | # CONFIG_USB_GADGET_PXA25X is not set |
1308 | # CONFIG_USB_GADGET_R8A66597 is not set | ||
1272 | # CONFIG_USB_GADGET_PXA27X is not set | 1309 | # CONFIG_USB_GADGET_PXA27X is not set |
1273 | # CONFIG_USB_GADGET_S3C_HSOTG is not set | 1310 | # CONFIG_USB_GADGET_S3C_HSOTG is not set |
1274 | # CONFIG_USB_GADGET_IMX is not set | 1311 | # CONFIG_USB_GADGET_IMX is not set |
@@ -1286,6 +1323,7 @@ CONFIG_USB_ZERO=m | |||
1286 | # CONFIG_USB_AUDIO is not set | 1323 | # CONFIG_USB_AUDIO is not set |
1287 | CONFIG_USB_ETH=m | 1324 | CONFIG_USB_ETH=m |
1288 | CONFIG_USB_ETH_RNDIS=y | 1325 | CONFIG_USB_ETH_RNDIS=y |
1326 | # CONFIG_USB_ETH_EEM is not set | ||
1289 | CONFIG_USB_GADGETFS=m | 1327 | CONFIG_USB_GADGETFS=m |
1290 | CONFIG_USB_FILE_STORAGE=m | 1328 | CONFIG_USB_FILE_STORAGE=m |
1291 | # CONFIG_USB_FILE_STORAGE_TEST is not set | 1329 | # CONFIG_USB_FILE_STORAGE_TEST is not set |
@@ -1316,8 +1354,10 @@ CONFIG_MMC_BLOCK=m | |||
1316 | # MMC/SD/SDIO Host Controller Drivers | 1354 | # MMC/SD/SDIO Host Controller Drivers |
1317 | # | 1355 | # |
1318 | # CONFIG_MMC_SDHCI is not set | 1356 | # CONFIG_MMC_SDHCI is not set |
1357 | # CONFIG_MMC_AT91 is not set | ||
1358 | # CONFIG_MMC_ATMELMCI is not set | ||
1359 | CONFIG_MMC_DAVINCI=m | ||
1319 | # CONFIG_MEMSTICK is not set | 1360 | # CONFIG_MEMSTICK is not set |
1320 | # CONFIG_ACCESSIBILITY is not set | ||
1321 | CONFIG_NEW_LEDS=y | 1361 | CONFIG_NEW_LEDS=y |
1322 | CONFIG_LEDS_CLASS=m | 1362 | CONFIG_LEDS_CLASS=m |
1323 | 1363 | ||
@@ -1345,6 +1385,7 @@ CONFIG_LEDS_TRIGGER_HEARTBEAT=m | |||
1345 | # | 1385 | # |
1346 | # iptables trigger is under Netfilter config (LED target) | 1386 | # iptables trigger is under Netfilter config (LED target) |
1347 | # | 1387 | # |
1388 | # CONFIG_ACCESSIBILITY is not set | ||
1348 | CONFIG_RTC_LIB=y | 1389 | CONFIG_RTC_LIB=y |
1349 | CONFIG_RTC_CLASS=m | 1390 | CONFIG_RTC_CLASS=m |
1350 | 1391 | ||
@@ -1370,6 +1411,7 @@ CONFIG_RTC_INTF_DEV=y | |||
1370 | # CONFIG_RTC_DRV_PCF8563 is not set | 1411 | # CONFIG_RTC_DRV_PCF8563 is not set |
1371 | # CONFIG_RTC_DRV_PCF8583 is not set | 1412 | # CONFIG_RTC_DRV_PCF8583 is not set |
1372 | # CONFIG_RTC_DRV_M41T80 is not set | 1413 | # CONFIG_RTC_DRV_M41T80 is not set |
1414 | # CONFIG_RTC_DRV_DM355EVM is not set | ||
1373 | # CONFIG_RTC_DRV_S35390A is not set | 1415 | # CONFIG_RTC_DRV_S35390A is not set |
1374 | # CONFIG_RTC_DRV_FM3130 is not set | 1416 | # CONFIG_RTC_DRV_FM3130 is not set |
1375 | # CONFIG_RTC_DRV_RX8581 is not set | 1417 | # CONFIG_RTC_DRV_RX8581 is not set |
@@ -1399,8 +1441,11 @@ CONFIG_RTC_INTF_DEV=y | |||
1399 | # | 1441 | # |
1400 | # CONFIG_DMADEVICES is not set | 1442 | # CONFIG_DMADEVICES is not set |
1401 | # CONFIG_AUXDISPLAY is not set | 1443 | # CONFIG_AUXDISPLAY is not set |
1402 | # CONFIG_REGULATOR is not set | ||
1403 | # CONFIG_UIO is not set | 1444 | # CONFIG_UIO is not set |
1445 | |||
1446 | # | ||
1447 | # TI VLYNQ | ||
1448 | # | ||
1404 | # CONFIG_STAGING is not set | 1449 | # CONFIG_STAGING is not set |
1405 | 1450 | ||
1406 | # | 1451 | # |
@@ -1429,6 +1474,7 @@ CONFIG_XFS_FS=m | |||
1429 | # CONFIG_GFS2_FS is not set | 1474 | # CONFIG_GFS2_FS is not set |
1430 | # CONFIG_OCFS2_FS is not set | 1475 | # CONFIG_OCFS2_FS is not set |
1431 | # CONFIG_BTRFS_FS is not set | 1476 | # CONFIG_BTRFS_FS is not set |
1477 | # CONFIG_NILFS2_FS is not set | ||
1432 | CONFIG_FILE_LOCKING=y | 1478 | CONFIG_FILE_LOCKING=y |
1433 | CONFIG_FSNOTIFY=y | 1479 | CONFIG_FSNOTIFY=y |
1434 | CONFIG_DNOTIFY=y | 1480 | CONFIG_DNOTIFY=y |
@@ -1500,7 +1546,6 @@ CONFIG_MINIX_FS=m | |||
1500 | # CONFIG_ROMFS_FS is not set | 1546 | # CONFIG_ROMFS_FS is not set |
1501 | # CONFIG_SYSV_FS is not set | 1547 | # CONFIG_SYSV_FS is not set |
1502 | # CONFIG_UFS_FS is not set | 1548 | # CONFIG_UFS_FS is not set |
1503 | # CONFIG_NILFS2_FS is not set | ||
1504 | CONFIG_NETWORK_FILESYSTEMS=y | 1549 | CONFIG_NETWORK_FILESYSTEMS=y |
1505 | CONFIG_NFS_FS=y | 1550 | CONFIG_NFS_FS=y |
1506 | CONFIG_NFS_V3=y | 1551 | CONFIG_NFS_V3=y |
@@ -1596,6 +1641,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y | |||
1596 | CONFIG_ENABLE_MUST_CHECK=y | 1641 | CONFIG_ENABLE_MUST_CHECK=y |
1597 | CONFIG_FRAME_WARN=1024 | 1642 | CONFIG_FRAME_WARN=1024 |
1598 | # CONFIG_MAGIC_SYSRQ is not set | 1643 | # CONFIG_MAGIC_SYSRQ is not set |
1644 | # CONFIG_STRIP_ASM_SYMS is not set | ||
1599 | # CONFIG_UNUSED_SYMBOLS is not set | 1645 | # CONFIG_UNUSED_SYMBOLS is not set |
1600 | CONFIG_DEBUG_FS=y | 1646 | CONFIG_DEBUG_FS=y |
1601 | # CONFIG_HEADERS_CHECK is not set | 1647 | # CONFIG_HEADERS_CHECK is not set |
@@ -1634,11 +1680,14 @@ CONFIG_DEBUG_BUGVERBOSE=y | |||
1634 | # CONFIG_DEBUG_LIST is not set | 1680 | # CONFIG_DEBUG_LIST is not set |
1635 | # CONFIG_DEBUG_SG is not set | 1681 | # CONFIG_DEBUG_SG is not set |
1636 | # CONFIG_DEBUG_NOTIFIERS is not set | 1682 | # CONFIG_DEBUG_NOTIFIERS is not set |
1683 | # CONFIG_DEBUG_CREDENTIALS is not set | ||
1684 | CONFIG_FRAME_POINTER=y | ||
1637 | # CONFIG_BOOT_PRINTK_DELAY is not set | 1685 | # CONFIG_BOOT_PRINTK_DELAY is not set |
1638 | # CONFIG_RCU_TORTURE_TEST is not set | 1686 | # CONFIG_RCU_TORTURE_TEST is not set |
1639 | # CONFIG_RCU_CPU_STALL_DETECTOR is not set | 1687 | # CONFIG_RCU_CPU_STALL_DETECTOR is not set |
1640 | # CONFIG_BACKTRACE_SELF_TEST is not set | 1688 | # CONFIG_BACKTRACE_SELF_TEST is not set |
1641 | # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set | 1689 | # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set |
1690 | # CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set | ||
1642 | # CONFIG_FAULT_INJECTION is not set | 1691 | # CONFIG_FAULT_INJECTION is not set |
1643 | # CONFIG_LATENCYTOP is not set | 1692 | # CONFIG_LATENCYTOP is not set |
1644 | # CONFIG_SYSCTL_SYSCALL_CHECK is not set | 1693 | # CONFIG_SYSCTL_SYSCALL_CHECK is not set |
@@ -1663,7 +1712,7 @@ CONFIG_BRANCH_PROFILE_NONE=y | |||
1663 | # CONFIG_SAMPLES is not set | 1712 | # CONFIG_SAMPLES is not set |
1664 | CONFIG_HAVE_ARCH_KGDB=y | 1713 | CONFIG_HAVE_ARCH_KGDB=y |
1665 | # CONFIG_KGDB is not set | 1714 | # CONFIG_KGDB is not set |
1666 | CONFIG_ARM_UNWIND=y | 1715 | # CONFIG_ARM_UNWIND is not set |
1667 | CONFIG_DEBUG_USER=y | 1716 | CONFIG_DEBUG_USER=y |
1668 | CONFIG_DEBUG_ERRORS=y | 1717 | CONFIG_DEBUG_ERRORS=y |
1669 | # CONFIG_DEBUG_STACK_USAGE is not set | 1718 | # CONFIG_DEBUG_STACK_USAGE is not set |
@@ -1681,7 +1730,6 @@ CONFIG_CRYPTO=y | |||
1681 | # | 1730 | # |
1682 | # Crypto core or helper | 1731 | # Crypto core or helper |
1683 | # | 1732 | # |
1684 | # CONFIG_CRYPTO_FIPS is not set | ||
1685 | # CONFIG_CRYPTO_MANAGER is not set | 1733 | # CONFIG_CRYPTO_MANAGER is not set |
1686 | # CONFIG_CRYPTO_MANAGER2 is not set | 1734 | # CONFIG_CRYPTO_MANAGER2 is not set |
1687 | # CONFIG_CRYPTO_GF128MUL is not set | 1735 | # CONFIG_CRYPTO_GF128MUL is not set |
@@ -1713,11 +1761,13 @@ CONFIG_CRYPTO=y | |||
1713 | # | 1761 | # |
1714 | # CONFIG_CRYPTO_HMAC is not set | 1762 | # CONFIG_CRYPTO_HMAC is not set |
1715 | # CONFIG_CRYPTO_XCBC is not set | 1763 | # CONFIG_CRYPTO_XCBC is not set |
1764 | # CONFIG_CRYPTO_VMAC is not set | ||
1716 | 1765 | ||
1717 | # | 1766 | # |
1718 | # Digest | 1767 | # Digest |
1719 | # | 1768 | # |
1720 | # CONFIG_CRYPTO_CRC32C is not set | 1769 | # CONFIG_CRYPTO_CRC32C is not set |
1770 | # CONFIG_CRYPTO_GHASH is not set | ||
1721 | # CONFIG_CRYPTO_MD4 is not set | 1771 | # CONFIG_CRYPTO_MD4 is not set |
1722 | # CONFIG_CRYPTO_MD5 is not set | 1772 | # CONFIG_CRYPTO_MD5 is not set |
1723 | # CONFIG_CRYPTO_MICHAEL_MIC is not set | 1773 | # CONFIG_CRYPTO_MICHAEL_MIC is not set |
diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig index 40866c643f13..033bfede6b67 100644 --- a/arch/arm/mach-davinci/Kconfig +++ b/arch/arm/mach-davinci/Kconfig | |||
@@ -32,11 +32,13 @@ config ARCH_DAVINCI_DA830 | |||
32 | bool "DA830/OMAP-L137 based system" | 32 | bool "DA830/OMAP-L137 based system" |
33 | select CP_INTC | 33 | select CP_INTC |
34 | select ARCH_DAVINCI_DA8XX | 34 | select ARCH_DAVINCI_DA8XX |
35 | select CPU_DCACHE_WRITETHROUGH # needed on silicon revs 1.0, 1.1 | ||
35 | 36 | ||
36 | config ARCH_DAVINCI_DA850 | 37 | config ARCH_DAVINCI_DA850 |
37 | bool "DA850/OMAP-L138 based system" | 38 | bool "DA850/OMAP-L138 based system" |
38 | select CP_INTC | 39 | select CP_INTC |
39 | select ARCH_DAVINCI_DA8XX | 40 | select ARCH_DAVINCI_DA8XX |
41 | select ARCH_HAS_CPUFREQ | ||
40 | 42 | ||
41 | config ARCH_DAVINCI_DA8XX | 43 | config ARCH_DAVINCI_DA8XX |
42 | bool | 44 | bool |
@@ -63,6 +65,13 @@ config MACH_SFFSDR | |||
63 | Say Y here to select the Lyrtech Small Form Factor | 65 | Say Y here to select the Lyrtech Small Form Factor |
64 | Software Defined Radio (SFFSDR) board. | 66 | Software Defined Radio (SFFSDR) board. |
65 | 67 | ||
68 | config MACH_NEUROS_OSD2 | ||
69 | bool "Neuros OSD2 Open Television Set Top Box" | ||
70 | depends on ARCH_DAVINCI_DM644x | ||
71 | help | ||
72 | Configure this option to specify the whether the board used | ||
73 | for development is a Neuros OSD2 Open Set Top Box. | ||
74 | |||
66 | config MACH_DAVINCI_DM355_EVM | 75 | config MACH_DAVINCI_DM355_EVM |
67 | bool "TI DM355 EVM" | 76 | bool "TI DM355 EVM" |
68 | default ARCH_DAVINCI_DM355 | 77 | default ARCH_DAVINCI_DM355 |
@@ -98,16 +107,66 @@ config MACH_DAVINCI_DA830_EVM | |||
98 | bool "TI DA830/OMAP-L137 Reference Platform" | 107 | bool "TI DA830/OMAP-L137 Reference Platform" |
99 | default ARCH_DAVINCI_DA830 | 108 | default ARCH_DAVINCI_DA830 |
100 | depends on ARCH_DAVINCI_DA830 | 109 | depends on ARCH_DAVINCI_DA830 |
110 | select GPIO_PCF857X | ||
101 | help | 111 | help |
102 | Say Y here to select the TI DA830/OMAP-L137 Evaluation Module. | 112 | Say Y here to select the TI DA830/OMAP-L137 Evaluation Module. |
103 | 113 | ||
114 | choice | ||
115 | prompt "Select DA830/OMAP-L137 UI board peripheral" | ||
116 | depends on MACH_DAVINCI_DA830_EVM | ||
117 | help | ||
118 | The presence of UI card on the DA830/OMAP-L137 EVM is detected | ||
119 | automatically based on successful probe of the I2C based GPIO | ||
120 | expander on that board. This option selected in this menu has | ||
121 | an effect only in case of a successful UI card detection. | ||
122 | |||
123 | config DA830_UI_LCD | ||
124 | bool "LCD" | ||
125 | help | ||
126 | Say Y here to use the LCD as a framebuffer or simple character | ||
127 | display. | ||
128 | |||
129 | config DA830_UI_NAND | ||
130 | bool "NAND flash" | ||
131 | help | ||
132 | Say Y here to use the NAND flash. Do not forget to setup | ||
133 | the switch correctly. | ||
134 | endchoice | ||
135 | |||
104 | config MACH_DAVINCI_DA850_EVM | 136 | config MACH_DAVINCI_DA850_EVM |
105 | bool "TI DA850/OMAP-L138 Reference Platform" | 137 | bool "TI DA850/OMAP-L138 Reference Platform" |
106 | default ARCH_DAVINCI_DA850 | 138 | default ARCH_DAVINCI_DA850 |
107 | depends on ARCH_DAVINCI_DA850 | 139 | depends on ARCH_DAVINCI_DA850 |
140 | select GPIO_PCA953X | ||
108 | help | 141 | help |
109 | Say Y here to select the TI DA850/OMAP-L138 Evaluation Module. | 142 | Say Y here to select the TI DA850/OMAP-L138 Evaluation Module. |
110 | 143 | ||
144 | choice | ||
145 | prompt "Select peripherals connected to expander on UI board" | ||
146 | depends on MACH_DAVINCI_DA850_EVM | ||
147 | help | ||
148 | The presence of User Interface (UI) card on the DA850/OMAP-L138 | ||
149 | EVM is detected automatically based on successful probe of the I2C | ||
150 | based GPIO expander on that card. This option selected in this | ||
151 | menu has an effect only in case of a successful UI card detection. | ||
152 | |||
153 | config DA850_UI_NONE | ||
154 | bool "No peripheral is enabled" | ||
155 | help | ||
156 | Say Y if you do not want to enable any of the peripherals connected | ||
157 | to TCA6416 expander on DA850/OMAP-L138 EVM UI card | ||
158 | |||
159 | config DA850_UI_RMII | ||
160 | bool "RMII Ethernet PHY" | ||
161 | help | ||
162 | Say Y if you want to use the RMII PHY on the DA850/OMAP-L138 EVM. | ||
163 | This PHY is found on the UI daughter card that is supplied with | ||
164 | the EVM. | ||
165 | NOTE: Please take care while choosing this option, MII PHY will | ||
166 | not be functional if RMII mode is selected. | ||
167 | |||
168 | endchoice | ||
169 | |||
111 | config DAVINCI_MUX | 170 | config DAVINCI_MUX |
112 | bool "DAVINCI multiplexing support" | 171 | bool "DAVINCI multiplexing support" |
113 | depends on ARCH_DAVINCI | 172 | depends on ARCH_DAVINCI |
diff --git a/arch/arm/mach-davinci/Makefile b/arch/arm/mach-davinci/Makefile index 2e11e847313b..eeb9230d8844 100644 --- a/arch/arm/mach-davinci/Makefile +++ b/arch/arm/mach-davinci/Makefile | |||
@@ -23,9 +23,14 @@ obj-$(CONFIG_CP_INTC) += cp_intc.o | |||
23 | # Board specific | 23 | # Board specific |
24 | obj-$(CONFIG_MACH_DAVINCI_EVM) += board-dm644x-evm.o | 24 | obj-$(CONFIG_MACH_DAVINCI_EVM) += board-dm644x-evm.o |
25 | obj-$(CONFIG_MACH_SFFSDR) += board-sffsdr.o | 25 | obj-$(CONFIG_MACH_SFFSDR) += board-sffsdr.o |
26 | obj-$(CONFIG_MACH_NEUROS_OSD2) += board-neuros-osd2.o | ||
26 | obj-$(CONFIG_MACH_DAVINCI_DM355_EVM) += board-dm355-evm.o | 27 | obj-$(CONFIG_MACH_DAVINCI_DM355_EVM) += board-dm355-evm.o |
27 | obj-$(CONFIG_MACH_DM355_LEOPARD) += board-dm355-leopard.o | 28 | obj-$(CONFIG_MACH_DM355_LEOPARD) += board-dm355-leopard.o |
28 | obj-$(CONFIG_MACH_DAVINCI_DM6467_EVM) += board-dm646x-evm.o | 29 | obj-$(CONFIG_MACH_DAVINCI_DM6467_EVM) += board-dm646x-evm.o |
29 | obj-$(CONFIG_MACH_DAVINCI_DM365_EVM) += board-dm365-evm.o | 30 | obj-$(CONFIG_MACH_DAVINCI_DM365_EVM) += board-dm365-evm.o |
30 | obj-$(CONFIG_MACH_DAVINCI_DA830_EVM) += board-da830-evm.o | 31 | obj-$(CONFIG_MACH_DAVINCI_DA830_EVM) += board-da830-evm.o |
31 | obj-$(CONFIG_MACH_DAVINCI_DA850_EVM) += board-da850-evm.o | 32 | obj-$(CONFIG_MACH_DAVINCI_DA850_EVM) += board-da850-evm.o |
33 | |||
34 | # Power Management | ||
35 | obj-$(CONFIG_CPU_FREQ) += cpufreq.o | ||
36 | obj-$(CONFIG_CPU_IDLE) += cpuidle.o | ||
diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c index bfbb63936f33..31dc9901e556 100644 --- a/arch/arm/mach-davinci/board-da830-evm.c +++ b/arch/arm/mach-davinci/board-da830-evm.c | |||
@@ -10,51 +10,194 @@ | |||
10 | * or implied. | 10 | * or implied. |
11 | */ | 11 | */ |
12 | #include <linux/kernel.h> | 12 | #include <linux/kernel.h> |
13 | #include <linux/module.h> | ||
14 | #include <linux/init.h> | 13 | #include <linux/init.h> |
15 | #include <linux/console.h> | 14 | #include <linux/console.h> |
15 | #include <linux/interrupt.h> | ||
16 | #include <linux/gpio.h> | ||
17 | #include <linux/platform_device.h> | ||
16 | #include <linux/i2c.h> | 18 | #include <linux/i2c.h> |
19 | #include <linux/i2c/pcf857x.h> | ||
17 | #include <linux/i2c/at24.h> | 20 | #include <linux/i2c/at24.h> |
21 | #include <linux/mtd/mtd.h> | ||
22 | #include <linux/mtd/partitions.h> | ||
18 | 23 | ||
19 | #include <asm/mach-types.h> | 24 | #include <asm/mach-types.h> |
20 | #include <asm/mach/arch.h> | 25 | #include <asm/mach/arch.h> |
21 | 26 | ||
22 | #include <mach/common.h> | ||
23 | #include <mach/irqs.h> | ||
24 | #include <mach/cp_intc.h> | 27 | #include <mach/cp_intc.h> |
28 | #include <mach/mux.h> | ||
29 | #include <mach/nand.h> | ||
25 | #include <mach/da8xx.h> | 30 | #include <mach/da8xx.h> |
26 | #include <mach/asp.h> | 31 | #include <mach/usb.h> |
27 | 32 | ||
28 | #define DA830_EVM_PHY_MASK 0x0 | 33 | #define DA830_EVM_PHY_MASK 0x0 |
29 | #define DA830_EVM_MDIO_FREQUENCY 2200000 /* PHY bus frequency */ | 34 | #define DA830_EVM_MDIO_FREQUENCY 2200000 /* PHY bus frequency */ |
30 | 35 | ||
31 | static struct at24_platform_data da830_evm_i2c_eeprom_info = { | 36 | #define DA830_EMIF25_ASYNC_DATA_CE3_BASE 0x62000000 |
32 | .byte_len = SZ_256K / 8, | 37 | #define DA830_EMIF25_CONTROL_BASE 0x68000000 |
33 | .page_size = 64, | ||
34 | .flags = AT24_FLAG_ADDR16, | ||
35 | .setup = davinci_get_mac_addr, | ||
36 | .context = (void *)0x7f00, | ||
37 | }; | ||
38 | 38 | ||
39 | static struct i2c_board_info __initdata da830_evm_i2c_devices[] = { | 39 | /* |
40 | { | 40 | * USB1 VBUS is controlled by GPIO1[15], over-current is reported on GPIO2[4]. |
41 | I2C_BOARD_INFO("24c256", 0x50), | 41 | */ |
42 | .platform_data = &da830_evm_i2c_eeprom_info, | 42 | #define ON_BD_USB_DRV GPIO_TO_PIN(1, 15) |
43 | }, | 43 | #define ON_BD_USB_OVC GPIO_TO_PIN(2, 4) |
44 | { | 44 | |
45 | I2C_BOARD_INFO("tlv320aic3x", 0x18), | 45 | static const short da830_evm_usb11_pins[] = { |
46 | } | 46 | DA830_GPIO1_15, DA830_GPIO2_4, |
47 | -1 | ||
47 | }; | 48 | }; |
48 | 49 | ||
49 | static struct davinci_i2c_platform_data da830_evm_i2c_0_pdata = { | 50 | static da8xx_ocic_handler_t da830_evm_usb_ocic_handler; |
50 | .bus_freq = 100, /* kHz */ | 51 | |
51 | .bus_delay = 0, /* usec */ | 52 | static int da830_evm_usb_set_power(unsigned port, int on) |
53 | { | ||
54 | gpio_set_value(ON_BD_USB_DRV, on); | ||
55 | return 0; | ||
56 | } | ||
57 | |||
58 | static int da830_evm_usb_get_power(unsigned port) | ||
59 | { | ||
60 | return gpio_get_value(ON_BD_USB_DRV); | ||
61 | } | ||
62 | |||
63 | static int da830_evm_usb_get_oci(unsigned port) | ||
64 | { | ||
65 | return !gpio_get_value(ON_BD_USB_OVC); | ||
66 | } | ||
67 | |||
68 | static irqreturn_t da830_evm_usb_ocic_irq(int, void *); | ||
69 | |||
70 | static int da830_evm_usb_ocic_notify(da8xx_ocic_handler_t handler) | ||
71 | { | ||
72 | int irq = gpio_to_irq(ON_BD_USB_OVC); | ||
73 | int error = 0; | ||
74 | |||
75 | if (handler != NULL) { | ||
76 | da830_evm_usb_ocic_handler = handler; | ||
77 | |||
78 | error = request_irq(irq, da830_evm_usb_ocic_irq, IRQF_DISABLED | | ||
79 | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, | ||
80 | "OHCI over-current indicator", NULL); | ||
81 | if (error) | ||
82 | printk(KERN_ERR "%s: could not request IRQ to watch " | ||
83 | "over-current indicator changes\n", __func__); | ||
84 | } else | ||
85 | free_irq(irq, NULL); | ||
86 | |||
87 | return error; | ||
88 | } | ||
89 | |||
90 | static struct da8xx_ohci_root_hub da830_evm_usb11_pdata = { | ||
91 | .set_power = da830_evm_usb_set_power, | ||
92 | .get_power = da830_evm_usb_get_power, | ||
93 | .get_oci = da830_evm_usb_get_oci, | ||
94 | .ocic_notify = da830_evm_usb_ocic_notify, | ||
95 | |||
96 | /* TPS2065 switch @ 5V */ | ||
97 | .potpgt = (3 + 1) / 2, /* 3 ms max */ | ||
52 | }; | 98 | }; |
53 | 99 | ||
100 | static irqreturn_t da830_evm_usb_ocic_irq(int irq, void *dev_id) | ||
101 | { | ||
102 | da830_evm_usb_ocic_handler(&da830_evm_usb11_pdata, 1); | ||
103 | return IRQ_HANDLED; | ||
104 | } | ||
105 | |||
106 | static __init void da830_evm_usb_init(void) | ||
107 | { | ||
108 | u32 cfgchip2; | ||
109 | int ret; | ||
110 | |||
111 | /* | ||
112 | * Set up USB clock/mode in the CFGCHIP2 register. | ||
113 | * FYI: CFGCHIP2 is 0x0000ef00 initially. | ||
114 | */ | ||
115 | cfgchip2 = __raw_readl(DA8XX_SYSCFG_VIRT(DA8XX_CFGCHIP2_REG)); | ||
116 | |||
117 | /* USB2.0 PHY reference clock is 24 MHz */ | ||
118 | cfgchip2 &= ~CFGCHIP2_REFFREQ; | ||
119 | cfgchip2 |= CFGCHIP2_REFFREQ_24MHZ; | ||
120 | |||
121 | /* | ||
122 | * Select internal reference clock for USB 2.0 PHY | ||
123 | * and use it as a clock source for USB 1.1 PHY | ||
124 | * (this is the default setting anyway). | ||
125 | */ | ||
126 | cfgchip2 &= ~CFGCHIP2_USB1PHYCLKMUX; | ||
127 | cfgchip2 |= CFGCHIP2_USB2PHYCLKMUX; | ||
128 | |||
129 | /* | ||
130 | * We have to override VBUS/ID signals when MUSB is configured into the | ||
131 | * host-only mode -- ID pin will float if no cable is connected, so the | ||
132 | * controller won't be able to drive VBUS thinking that it's a B-device. | ||
133 | * Otherwise, we want to use the OTG mode and enable VBUS comparators. | ||
134 | */ | ||
135 | cfgchip2 &= ~CFGCHIP2_OTGMODE; | ||
136 | #ifdef CONFIG_USB_MUSB_HOST | ||
137 | cfgchip2 |= CFGCHIP2_FORCE_HOST; | ||
138 | #else | ||
139 | cfgchip2 |= CFGCHIP2_SESENDEN | CFGCHIP2_VBDTCTEN; | ||
140 | #endif | ||
141 | |||
142 | __raw_writel(cfgchip2, DA8XX_SYSCFG_VIRT(DA8XX_CFGCHIP2_REG)); | ||
143 | |||
144 | /* USB_REFCLKIN is not used. */ | ||
145 | ret = davinci_cfg_reg(DA830_USB0_DRVVBUS); | ||
146 | if (ret) | ||
147 | pr_warning("%s: USB 2.0 PinMux setup failed: %d\n", | ||
148 | __func__, ret); | ||
149 | else { | ||
150 | /* | ||
151 | * TPS2065 switch @ 5V supplies 1 A (sustains 1.5 A), | ||
152 | * with the power on to power good time of 3 ms. | ||
153 | */ | ||
154 | ret = da8xx_register_usb20(1000, 3); | ||
155 | if (ret) | ||
156 | pr_warning("%s: USB 2.0 registration failed: %d\n", | ||
157 | __func__, ret); | ||
158 | } | ||
159 | |||
160 | ret = da8xx_pinmux_setup(da830_evm_usb11_pins); | ||
161 | if (ret) { | ||
162 | pr_warning("%s: USB 1.1 PinMux setup failed: %d\n", | ||
163 | __func__, ret); | ||
164 | return; | ||
165 | } | ||
166 | |||
167 | ret = gpio_request(ON_BD_USB_DRV, "ON_BD_USB_DRV"); | ||
168 | if (ret) { | ||
169 | printk(KERN_ERR "%s: failed to request GPIO for USB 1.1 port " | ||
170 | "power control: %d\n", __func__, ret); | ||
171 | return; | ||
172 | } | ||
173 | gpio_direction_output(ON_BD_USB_DRV, 0); | ||
174 | |||
175 | ret = gpio_request(ON_BD_USB_OVC, "ON_BD_USB_OVC"); | ||
176 | if (ret) { | ||
177 | printk(KERN_ERR "%s: failed to request GPIO for USB 1.1 port " | ||
178 | "over-current indicator: %d\n", __func__, ret); | ||
179 | return; | ||
180 | } | ||
181 | gpio_direction_input(ON_BD_USB_OVC); | ||
182 | |||
183 | ret = da8xx_register_usb11(&da830_evm_usb11_pdata); | ||
184 | if (ret) | ||
185 | pr_warning("%s: USB 1.1 registration failed: %d\n", | ||
186 | __func__, ret); | ||
187 | } | ||
188 | |||
54 | static struct davinci_uart_config da830_evm_uart_config __initdata = { | 189 | static struct davinci_uart_config da830_evm_uart_config __initdata = { |
55 | .enabled_uarts = 0x7, | 190 | .enabled_uarts = 0x7, |
56 | }; | 191 | }; |
57 | 192 | ||
193 | static const short da830_evm_mcasp1_pins[] = { | ||
194 | DA830_AHCLKX1, DA830_ACLKX1, DA830_AFSX1, DA830_AHCLKR1, DA830_AFSR1, | ||
195 | DA830_AMUTE1, DA830_AXR1_0, DA830_AXR1_1, DA830_AXR1_2, DA830_AXR1_5, | ||
196 | DA830_ACLKR1, DA830_AXR1_6, DA830_AXR1_7, DA830_AXR1_8, DA830_AXR1_10, | ||
197 | DA830_AXR1_11, | ||
198 | -1 | ||
199 | }; | ||
200 | |||
58 | static u8 da830_iis_serializer_direction[] = { | 201 | static u8 da830_iis_serializer_direction[] = { |
59 | RX_MODE, INACTIVE_MODE, INACTIVE_MODE, INACTIVE_MODE, | 202 | RX_MODE, INACTIVE_MODE, INACTIVE_MODE, INACTIVE_MODE, |
60 | INACTIVE_MODE, TX_MODE, INACTIVE_MODE, INACTIVE_MODE, | 203 | INACTIVE_MODE, TX_MODE, INACTIVE_MODE, INACTIVE_MODE, |
@@ -74,6 +217,271 @@ static struct snd_platform_data da830_evm_snd_data = { | |||
74 | .rxnumevt = 1, | 217 | .rxnumevt = 1, |
75 | }; | 218 | }; |
76 | 219 | ||
220 | /* | ||
221 | * GPIO2[1] is used as MMC_SD_WP and GPIO2[2] as MMC_SD_INS. | ||
222 | */ | ||
223 | static const short da830_evm_mmc_sd_pins[] = { | ||
224 | DA830_MMCSD_DAT_0, DA830_MMCSD_DAT_1, DA830_MMCSD_DAT_2, | ||
225 | DA830_MMCSD_DAT_3, DA830_MMCSD_DAT_4, DA830_MMCSD_DAT_5, | ||
226 | DA830_MMCSD_DAT_6, DA830_MMCSD_DAT_7, DA830_MMCSD_CLK, | ||
227 | DA830_MMCSD_CMD, DA830_GPIO2_1, DA830_GPIO2_2, | ||
228 | -1 | ||
229 | }; | ||
230 | |||
231 | #define DA830_MMCSD_WP_PIN GPIO_TO_PIN(2, 1) | ||
232 | |||
233 | static int da830_evm_mmc_get_ro(int index) | ||
234 | { | ||
235 | return gpio_get_value(DA830_MMCSD_WP_PIN); | ||
236 | } | ||
237 | |||
238 | static struct davinci_mmc_config da830_evm_mmc_config = { | ||
239 | .get_ro = da830_evm_mmc_get_ro, | ||
240 | .wires = 4, | ||
241 | .max_freq = 50000000, | ||
242 | .caps = MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED, | ||
243 | .version = MMC_CTLR_VERSION_2, | ||
244 | }; | ||
245 | |||
246 | static inline void da830_evm_init_mmc(void) | ||
247 | { | ||
248 | int ret; | ||
249 | |||
250 | ret = da8xx_pinmux_setup(da830_evm_mmc_sd_pins); | ||
251 | if (ret) { | ||
252 | pr_warning("da830_evm_init: mmc/sd mux setup failed: %d\n", | ||
253 | ret); | ||
254 | return; | ||
255 | } | ||
256 | |||
257 | ret = gpio_request(DA830_MMCSD_WP_PIN, "MMC WP"); | ||
258 | if (ret) { | ||
259 | pr_warning("da830_evm_init: can not open GPIO %d\n", | ||
260 | DA830_MMCSD_WP_PIN); | ||
261 | return; | ||
262 | } | ||
263 | gpio_direction_input(DA830_MMCSD_WP_PIN); | ||
264 | |||
265 | ret = da8xx_register_mmcsd0(&da830_evm_mmc_config); | ||
266 | if (ret) { | ||
267 | pr_warning("da830_evm_init: mmc/sd registration failed: %d\n", | ||
268 | ret); | ||
269 | gpio_free(DA830_MMCSD_WP_PIN); | ||
270 | } | ||
271 | } | ||
272 | |||
273 | /* | ||
274 | * UI board NAND/NOR flashes only use 8-bit data bus. | ||
275 | */ | ||
276 | static const short da830_evm_emif25_pins[] = { | ||
277 | DA830_EMA_D_0, DA830_EMA_D_1, DA830_EMA_D_2, DA830_EMA_D_3, | ||
278 | DA830_EMA_D_4, DA830_EMA_D_5, DA830_EMA_D_6, DA830_EMA_D_7, | ||
279 | DA830_EMA_A_0, DA830_EMA_A_1, DA830_EMA_A_2, DA830_EMA_A_3, | ||
280 | DA830_EMA_A_4, DA830_EMA_A_5, DA830_EMA_A_6, DA830_EMA_A_7, | ||
281 | DA830_EMA_A_8, DA830_EMA_A_9, DA830_EMA_A_10, DA830_EMA_A_11, | ||
282 | DA830_EMA_A_12, DA830_EMA_BA_0, DA830_EMA_BA_1, DA830_NEMA_WE, | ||
283 | DA830_NEMA_CS_2, DA830_NEMA_CS_3, DA830_NEMA_OE, DA830_EMA_WAIT_0, | ||
284 | -1 | ||
285 | }; | ||
286 | |||
287 | #if defined(CONFIG_MMC_DAVINCI) || defined(CONFIG_MMC_DAVINCI_MODULE) | ||
288 | #define HAS_MMC 1 | ||
289 | #else | ||
290 | #define HAS_MMC 0 | ||
291 | #endif | ||
292 | |||
293 | #ifdef CONFIG_DA830_UI_NAND | ||
294 | static struct mtd_partition da830_evm_nand_partitions[] = { | ||
295 | /* bootloader (U-Boot, etc) in first sector */ | ||
296 | [0] = { | ||
297 | .name = "bootloader", | ||
298 | .offset = 0, | ||
299 | .size = SZ_128K, | ||
300 | .mask_flags = MTD_WRITEABLE, /* force read-only */ | ||
301 | }, | ||
302 | /* bootloader params in the next sector */ | ||
303 | [1] = { | ||
304 | .name = "params", | ||
305 | .offset = MTDPART_OFS_APPEND, | ||
306 | .size = SZ_128K, | ||
307 | .mask_flags = MTD_WRITEABLE, /* force read-only */ | ||
308 | }, | ||
309 | /* kernel */ | ||
310 | [2] = { | ||
311 | .name = "kernel", | ||
312 | .offset = MTDPART_OFS_APPEND, | ||
313 | .size = SZ_2M, | ||
314 | .mask_flags = 0, | ||
315 | }, | ||
316 | /* file system */ | ||
317 | [3] = { | ||
318 | .name = "filesystem", | ||
319 | .offset = MTDPART_OFS_APPEND, | ||
320 | .size = MTDPART_SIZ_FULL, | ||
321 | .mask_flags = 0, | ||
322 | } | ||
323 | }; | ||
324 | |||
325 | /* flash bbt decriptors */ | ||
326 | static uint8_t da830_evm_nand_bbt_pattern[] = { 'B', 'b', 't', '0' }; | ||
327 | static uint8_t da830_evm_nand_mirror_pattern[] = { '1', 't', 'b', 'B' }; | ||
328 | |||
329 | static struct nand_bbt_descr da830_evm_nand_bbt_main_descr = { | ||
330 | .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | | ||
331 | NAND_BBT_WRITE | NAND_BBT_2BIT | | ||
332 | NAND_BBT_VERSION | NAND_BBT_PERCHIP, | ||
333 | .offs = 2, | ||
334 | .len = 4, | ||
335 | .veroffs = 16, | ||
336 | .maxblocks = 4, | ||
337 | .pattern = da830_evm_nand_bbt_pattern | ||
338 | }; | ||
339 | |||
340 | static struct nand_bbt_descr da830_evm_nand_bbt_mirror_descr = { | ||
341 | .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | | ||
342 | NAND_BBT_WRITE | NAND_BBT_2BIT | | ||
343 | NAND_BBT_VERSION | NAND_BBT_PERCHIP, | ||
344 | .offs = 2, | ||
345 | .len = 4, | ||
346 | .veroffs = 16, | ||
347 | .maxblocks = 4, | ||
348 | .pattern = da830_evm_nand_mirror_pattern | ||
349 | }; | ||
350 | |||
351 | static struct davinci_nand_pdata da830_evm_nand_pdata = { | ||
352 | .parts = da830_evm_nand_partitions, | ||
353 | .nr_parts = ARRAY_SIZE(da830_evm_nand_partitions), | ||
354 | .ecc_mode = NAND_ECC_HW, | ||
355 | .ecc_bits = 4, | ||
356 | .options = NAND_USE_FLASH_BBT, | ||
357 | .bbt_td = &da830_evm_nand_bbt_main_descr, | ||
358 | .bbt_md = &da830_evm_nand_bbt_mirror_descr, | ||
359 | }; | ||
360 | |||
361 | static struct resource da830_evm_nand_resources[] = { | ||
362 | [0] = { /* First memory resource is NAND I/O window */ | ||
363 | .start = DA830_EMIF25_ASYNC_DATA_CE3_BASE, | ||
364 | .end = DA830_EMIF25_ASYNC_DATA_CE3_BASE + PAGE_SIZE - 1, | ||
365 | .flags = IORESOURCE_MEM, | ||
366 | }, | ||
367 | [1] = { /* Second memory resource is AEMIF control registers */ | ||
368 | .start = DA830_EMIF25_CONTROL_BASE, | ||
369 | .end = DA830_EMIF25_CONTROL_BASE + SZ_32K - 1, | ||
370 | .flags = IORESOURCE_MEM, | ||
371 | }, | ||
372 | }; | ||
373 | |||
374 | static struct platform_device da830_evm_nand_device = { | ||
375 | .name = "davinci_nand", | ||
376 | .id = 1, | ||
377 | .dev = { | ||
378 | .platform_data = &da830_evm_nand_pdata, | ||
379 | }, | ||
380 | .num_resources = ARRAY_SIZE(da830_evm_nand_resources), | ||
381 | .resource = da830_evm_nand_resources, | ||
382 | }; | ||
383 | |||
384 | static inline void da830_evm_init_nand(int mux_mode) | ||
385 | { | ||
386 | int ret; | ||
387 | |||
388 | if (HAS_MMC) { | ||
389 | pr_warning("WARNING: both MMC/SD and NAND are " | ||
390 | "enabled, but they share AEMIF pins.\n" | ||
391 | "\tDisable MMC/SD for NAND support.\n"); | ||
392 | return; | ||
393 | } | ||
394 | |||
395 | ret = da8xx_pinmux_setup(da830_evm_emif25_pins); | ||
396 | if (ret) | ||
397 | pr_warning("da830_evm_init: emif25 mux setup failed: %d\n", | ||
398 | ret); | ||
399 | |||
400 | ret = platform_device_register(&da830_evm_nand_device); | ||
401 | if (ret) | ||
402 | pr_warning("da830_evm_init: NAND device not registered.\n"); | ||
403 | |||
404 | gpio_direction_output(mux_mode, 1); | ||
405 | } | ||
406 | #else | ||
407 | static inline void da830_evm_init_nand(int mux_mode) { } | ||
408 | #endif | ||
409 | |||
410 | #ifdef CONFIG_DA830_UI_LCD | ||
411 | static inline void da830_evm_init_lcdc(int mux_mode) | ||
412 | { | ||
413 | int ret; | ||
414 | |||
415 | ret = da8xx_pinmux_setup(da830_lcdcntl_pins); | ||
416 | if (ret) | ||
417 | pr_warning("da830_evm_init: lcdcntl mux setup failed: %d\n", | ||
418 | ret); | ||
419 | |||
420 | ret = da8xx_register_lcdc(&sharp_lcd035q3dg01_pdata); | ||
421 | if (ret) | ||
422 | pr_warning("da830_evm_init: lcd setup failed: %d\n", ret); | ||
423 | |||
424 | gpio_direction_output(mux_mode, 0); | ||
425 | } | ||
426 | #else | ||
427 | static inline void da830_evm_init_lcdc(int mux_mode) { } | ||
428 | #endif | ||
429 | |||
430 | static struct at24_platform_data da830_evm_i2c_eeprom_info = { | ||
431 | .byte_len = SZ_256K / 8, | ||
432 | .page_size = 64, | ||
433 | .flags = AT24_FLAG_ADDR16, | ||
434 | .setup = davinci_get_mac_addr, | ||
435 | .context = (void *)0x7f00, | ||
436 | }; | ||
437 | |||
438 | static int __init da830_evm_ui_expander_setup(struct i2c_client *client, | ||
439 | int gpio, unsigned ngpio, void *context) | ||
440 | { | ||
441 | gpio_request(gpio + 6, "UI MUX_MODE"); | ||
442 | |||
443 | /* Drive mux mode low to match the default without UI card */ | ||
444 | gpio_direction_output(gpio + 6, 0); | ||
445 | |||
446 | da830_evm_init_lcdc(gpio + 6); | ||
447 | |||
448 | da830_evm_init_nand(gpio + 6); | ||
449 | |||
450 | return 0; | ||
451 | } | ||
452 | |||
453 | static int da830_evm_ui_expander_teardown(struct i2c_client *client, int gpio, | ||
454 | unsigned ngpio, void *context) | ||
455 | { | ||
456 | gpio_free(gpio + 6); | ||
457 | return 0; | ||
458 | } | ||
459 | |||
460 | static struct pcf857x_platform_data __initdata da830_evm_ui_expander_info = { | ||
461 | .gpio_base = DAVINCI_N_GPIO, | ||
462 | .setup = da830_evm_ui_expander_setup, | ||
463 | .teardown = da830_evm_ui_expander_teardown, | ||
464 | }; | ||
465 | |||
466 | static struct i2c_board_info __initdata da830_evm_i2c_devices[] = { | ||
467 | { | ||
468 | I2C_BOARD_INFO("24c256", 0x50), | ||
469 | .platform_data = &da830_evm_i2c_eeprom_info, | ||
470 | }, | ||
471 | { | ||
472 | I2C_BOARD_INFO("tlv320aic3x", 0x18), | ||
473 | }, | ||
474 | { | ||
475 | I2C_BOARD_INFO("pcf8574", 0x3f), | ||
476 | .platform_data = &da830_evm_ui_expander_info, | ||
477 | }, | ||
478 | }; | ||
479 | |||
480 | static struct davinci_i2c_platform_data da830_evm_i2c_0_pdata = { | ||
481 | .bus_freq = 100, /* kHz */ | ||
482 | .bus_delay = 0, /* usec */ | ||
483 | }; | ||
484 | |||
77 | static __init void da830_evm_init(void) | 485 | static __init void da830_evm_init(void) |
78 | { | 486 | { |
79 | struct davinci_soc_info *soc_info = &davinci_soc_info; | 487 | struct davinci_soc_info *soc_info = &davinci_soc_info; |
@@ -94,6 +502,8 @@ static __init void da830_evm_init(void) | |||
94 | pr_warning("da830_evm_init: i2c0 registration failed: %d\n", | 502 | pr_warning("da830_evm_init: i2c0 registration failed: %d\n", |
95 | ret); | 503 | ret); |
96 | 504 | ||
505 | da830_evm_usb_init(); | ||
506 | |||
97 | soc_info->emac_pdata->phy_mask = DA830_EVM_PHY_MASK; | 507 | soc_info->emac_pdata->phy_mask = DA830_EVM_PHY_MASK; |
98 | soc_info->emac_pdata->mdio_max_freq = DA830_EVM_MDIO_FREQUENCY; | 508 | soc_info->emac_pdata->mdio_max_freq = DA830_EVM_MDIO_FREQUENCY; |
99 | soc_info->emac_pdata->rmii_en = 1; | 509 | soc_info->emac_pdata->rmii_en = 1; |
@@ -117,12 +527,18 @@ static __init void da830_evm_init(void) | |||
117 | i2c_register_board_info(1, da830_evm_i2c_devices, | 527 | i2c_register_board_info(1, da830_evm_i2c_devices, |
118 | ARRAY_SIZE(da830_evm_i2c_devices)); | 528 | ARRAY_SIZE(da830_evm_i2c_devices)); |
119 | 529 | ||
120 | ret = da8xx_pinmux_setup(da830_mcasp1_pins); | 530 | ret = da8xx_pinmux_setup(da830_evm_mcasp1_pins); |
121 | if (ret) | 531 | if (ret) |
122 | pr_warning("da830_evm_init: mcasp1 mux setup failed: %d\n", | 532 | pr_warning("da830_evm_init: mcasp1 mux setup failed: %d\n", |
123 | ret); | 533 | ret); |
124 | 534 | ||
125 | da8xx_init_mcasp(1, &da830_evm_snd_data); | 535 | da8xx_register_mcasp(1, &da830_evm_snd_data); |
536 | |||
537 | da830_evm_init_mmc(); | ||
538 | |||
539 | ret = da8xx_register_rtc(); | ||
540 | if (ret) | ||
541 | pr_warning("da830_evm_init: rtc setup failed: %d\n", ret); | ||
126 | } | 542 | } |
127 | 543 | ||
128 | #ifdef CONFIG_SERIAL_8250_CONSOLE | 544 | #ifdef CONFIG_SERIAL_8250_CONSOLE |
@@ -146,7 +562,7 @@ static void __init da830_evm_map_io(void) | |||
146 | da830_init(); | 562 | da830_init(); |
147 | } | 563 | } |
148 | 564 | ||
149 | MACHINE_START(DAVINCI_DA830_EVM, "DaVinci DA830/OMAP L137 EVM") | 565 | MACHINE_START(DAVINCI_DA830_EVM, "DaVinci DA830/OMAP-L137 EVM") |
150 | .phys_io = IO_PHYS, | 566 | .phys_io = IO_PHYS, |
151 | .io_pg_offst = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc, | 567 | .io_pg_offst = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc, |
152 | .boot_params = (DA8XX_DDR_BASE + 0x100), | 568 | .boot_params = (DA8XX_DDR_BASE + 0x100), |
diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c index c759d72494e0..62b98bffc158 100644 --- a/arch/arm/mach-davinci/board-da850-evm.c +++ b/arch/arm/mach-davinci/board-da850-evm.c | |||
@@ -12,36 +12,38 @@ | |||
12 | * or implied. | 12 | * or implied. |
13 | */ | 13 | */ |
14 | #include <linux/kernel.h> | 14 | #include <linux/kernel.h> |
15 | #include <linux/module.h> | ||
16 | #include <linux/init.h> | 15 | #include <linux/init.h> |
17 | #include <linux/console.h> | 16 | #include <linux/console.h> |
18 | #include <linux/i2c.h> | 17 | #include <linux/i2c.h> |
19 | #include <linux/i2c/at24.h> | 18 | #include <linux/i2c/at24.h> |
19 | #include <linux/i2c/pca953x.h> | ||
20 | #include <linux/gpio.h> | 20 | #include <linux/gpio.h> |
21 | #include <linux/platform_device.h> | 21 | #include <linux/platform_device.h> |
22 | #include <linux/mtd/mtd.h> | 22 | #include <linux/mtd/mtd.h> |
23 | #include <linux/mtd/nand.h> | 23 | #include <linux/mtd/nand.h> |
24 | #include <linux/mtd/partitions.h> | 24 | #include <linux/mtd/partitions.h> |
25 | #include <linux/mtd/physmap.h> | 25 | #include <linux/mtd/physmap.h> |
26 | #include <linux/regulator/machine.h> | ||
26 | 27 | ||
27 | #include <asm/mach-types.h> | 28 | #include <asm/mach-types.h> |
28 | #include <asm/mach/arch.h> | 29 | #include <asm/mach/arch.h> |
29 | 30 | ||
30 | #include <mach/common.h> | ||
31 | #include <mach/irqs.h> | ||
32 | #include <mach/cp_intc.h> | 31 | #include <mach/cp_intc.h> |
33 | #include <mach/da8xx.h> | 32 | #include <mach/da8xx.h> |
34 | #include <mach/nand.h> | 33 | #include <mach/nand.h> |
34 | #include <mach/mux.h> | ||
35 | 35 | ||
36 | #define DA850_EVM_PHY_MASK 0x1 | 36 | #define DA850_EVM_PHY_MASK 0x1 |
37 | #define DA850_EVM_MDIO_FREQUENCY 2200000 /* PHY bus frequency */ | 37 | #define DA850_EVM_MDIO_FREQUENCY 2200000 /* PHY bus frequency */ |
38 | 38 | ||
39 | #define DA850_LCD_PWR_PIN GPIO_TO_PIN(2, 8) | ||
39 | #define DA850_LCD_BL_PIN GPIO_TO_PIN(2, 15) | 40 | #define DA850_LCD_BL_PIN GPIO_TO_PIN(2, 15) |
40 | #define DA850_LCD_PWR_PIN GPIO_TO_PIN(8, 10) | ||
41 | 41 | ||
42 | #define DA850_MMCSD_CD_PIN GPIO_TO_PIN(4, 0) | 42 | #define DA850_MMCSD_CD_PIN GPIO_TO_PIN(4, 0) |
43 | #define DA850_MMCSD_WP_PIN GPIO_TO_PIN(4, 1) | 43 | #define DA850_MMCSD_WP_PIN GPIO_TO_PIN(4, 1) |
44 | 44 | ||
45 | #define DA850_MII_MDIO_CLKEN_PIN GPIO_TO_PIN(2, 6) | ||
46 | |||
45 | static struct mtd_partition da850_evm_norflash_partition[] = { | 47 | static struct mtd_partition da850_evm_norflash_partition[] = { |
46 | { | 48 | { |
47 | .name = "NOR filesystem", | 49 | .name = "NOR filesystem", |
@@ -143,10 +145,149 @@ static struct platform_device da850_evm_nandflash_device = { | |||
143 | .resource = da850_evm_nandflash_resource, | 145 | .resource = da850_evm_nandflash_resource, |
144 | }; | 146 | }; |
145 | 147 | ||
148 | static struct platform_device *da850_evm_devices[] __initdata = { | ||
149 | &da850_evm_nandflash_device, | ||
150 | &da850_evm_norflash_device, | ||
151 | }; | ||
152 | |||
153 | #define DA8XX_AEMIF_CE2CFG_OFFSET 0x10 | ||
154 | #define DA8XX_AEMIF_ASIZE_16BIT 0x1 | ||
155 | |||
156 | static void __init da850_evm_init_nor(void) | ||
157 | { | ||
158 | void __iomem *aemif_addr; | ||
159 | |||
160 | aemif_addr = ioremap(DA8XX_AEMIF_CTL_BASE, SZ_32K); | ||
161 | |||
162 | /* Configure data bus width of CS2 to 16 bit */ | ||
163 | writel(readl(aemif_addr + DA8XX_AEMIF_CE2CFG_OFFSET) | | ||
164 | DA8XX_AEMIF_ASIZE_16BIT, | ||
165 | aemif_addr + DA8XX_AEMIF_CE2CFG_OFFSET); | ||
166 | |||
167 | iounmap(aemif_addr); | ||
168 | } | ||
169 | |||
170 | static u32 ui_card_detected; | ||
171 | |||
172 | #if defined(CONFIG_MMC_DAVINCI) || \ | ||
173 | defined(CONFIG_MMC_DAVINCI_MODULE) | ||
174 | #define HAS_MMC 1 | ||
175 | #else | ||
176 | #define HAS_MMC 0 | ||
177 | #endif | ||
178 | |||
179 | static __init void da850_evm_setup_nor_nand(void) | ||
180 | { | ||
181 | int ret = 0; | ||
182 | |||
183 | if (ui_card_detected & !HAS_MMC) { | ||
184 | ret = da8xx_pinmux_setup(da850_nand_pins); | ||
185 | if (ret) | ||
186 | pr_warning("da850_evm_init: nand mux setup failed: " | ||
187 | "%d\n", ret); | ||
188 | |||
189 | ret = da8xx_pinmux_setup(da850_nor_pins); | ||
190 | if (ret) | ||
191 | pr_warning("da850_evm_init: nor mux setup failed: %d\n", | ||
192 | ret); | ||
193 | |||
194 | da850_evm_init_nor(); | ||
195 | |||
196 | platform_add_devices(da850_evm_devices, | ||
197 | ARRAY_SIZE(da850_evm_devices)); | ||
198 | } | ||
199 | } | ||
200 | |||
201 | #ifdef CONFIG_DA850_UI_RMII | ||
202 | static inline void da850_evm_setup_emac_rmii(int rmii_sel) | ||
203 | { | ||
204 | struct davinci_soc_info *soc_info = &davinci_soc_info; | ||
205 | |||
206 | soc_info->emac_pdata->rmii_en = 1; | ||
207 | gpio_set_value(rmii_sel, 0); | ||
208 | } | ||
209 | #else | ||
210 | static inline void da850_evm_setup_emac_rmii(int rmii_sel) { } | ||
211 | #endif | ||
212 | |||
213 | static int da850_evm_ui_expander_setup(struct i2c_client *client, unsigned gpio, | ||
214 | unsigned ngpio, void *c) | ||
215 | { | ||
216 | int sel_a, sel_b, sel_c, ret; | ||
217 | |||
218 | sel_a = gpio + 7; | ||
219 | sel_b = gpio + 6; | ||
220 | sel_c = gpio + 5; | ||
221 | |||
222 | ret = gpio_request(sel_a, "sel_a"); | ||
223 | if (ret) { | ||
224 | pr_warning("Cannot open UI expander pin %d\n", sel_a); | ||
225 | goto exp_setup_sela_fail; | ||
226 | } | ||
227 | |||
228 | ret = gpio_request(sel_b, "sel_b"); | ||
229 | if (ret) { | ||
230 | pr_warning("Cannot open UI expander pin %d\n", sel_b); | ||
231 | goto exp_setup_selb_fail; | ||
232 | } | ||
233 | |||
234 | ret = gpio_request(sel_c, "sel_c"); | ||
235 | if (ret) { | ||
236 | pr_warning("Cannot open UI expander pin %d\n", sel_c); | ||
237 | goto exp_setup_selc_fail; | ||
238 | } | ||
239 | |||
240 | /* deselect all functionalities */ | ||
241 | gpio_direction_output(sel_a, 1); | ||
242 | gpio_direction_output(sel_b, 1); | ||
243 | gpio_direction_output(sel_c, 1); | ||
244 | |||
245 | ui_card_detected = 1; | ||
246 | pr_info("DA850/OMAP-L138 EVM UI card detected\n"); | ||
247 | |||
248 | da850_evm_setup_nor_nand(); | ||
249 | |||
250 | da850_evm_setup_emac_rmii(sel_a); | ||
251 | |||
252 | return 0; | ||
253 | |||
254 | exp_setup_selc_fail: | ||
255 | gpio_free(sel_b); | ||
256 | exp_setup_selb_fail: | ||
257 | gpio_free(sel_a); | ||
258 | exp_setup_sela_fail: | ||
259 | return ret; | ||
260 | } | ||
261 | |||
262 | static int da850_evm_ui_expander_teardown(struct i2c_client *client, | ||
263 | unsigned gpio, unsigned ngpio, void *c) | ||
264 | { | ||
265 | /* deselect all functionalities */ | ||
266 | gpio_set_value(gpio + 5, 1); | ||
267 | gpio_set_value(gpio + 6, 1); | ||
268 | gpio_set_value(gpio + 7, 1); | ||
269 | |||
270 | gpio_free(gpio + 5); | ||
271 | gpio_free(gpio + 6); | ||
272 | gpio_free(gpio + 7); | ||
273 | |||
274 | return 0; | ||
275 | } | ||
276 | |||
277 | static struct pca953x_platform_data da850_evm_ui_expander_info = { | ||
278 | .gpio_base = DAVINCI_N_GPIO, | ||
279 | .setup = da850_evm_ui_expander_setup, | ||
280 | .teardown = da850_evm_ui_expander_teardown, | ||
281 | }; | ||
282 | |||
146 | static struct i2c_board_info __initdata da850_evm_i2c_devices[] = { | 283 | static struct i2c_board_info __initdata da850_evm_i2c_devices[] = { |
147 | { | 284 | { |
148 | I2C_BOARD_INFO("tlv320aic3x", 0x18), | 285 | I2C_BOARD_INFO("tlv320aic3x", 0x18), |
149 | } | 286 | }, |
287 | { | ||
288 | I2C_BOARD_INFO("tca6416", 0x20), | ||
289 | .platform_data = &da850_evm_ui_expander_info, | ||
290 | }, | ||
150 | }; | 291 | }; |
151 | 292 | ||
152 | static struct davinci_i2c_platform_data da850_evm_i2c_0_pdata = { | 293 | static struct davinci_i2c_platform_data da850_evm_i2c_0_pdata = { |
@@ -158,11 +299,6 @@ static struct davinci_uart_config da850_evm_uart_config __initdata = { | |||
158 | .enabled_uarts = 0x7, | 299 | .enabled_uarts = 0x7, |
159 | }; | 300 | }; |
160 | 301 | ||
161 | static struct platform_device *da850_evm_devices[] __initdata = { | ||
162 | &da850_evm_nandflash_device, | ||
163 | &da850_evm_norflash_device, | ||
164 | }; | ||
165 | |||
166 | /* davinci da850 evm audio machine driver */ | 302 | /* davinci da850 evm audio machine driver */ |
167 | static u8 da850_iis_serializer_direction[] = { | 303 | static u8 da850_iis_serializer_direction[] = { |
168 | INACTIVE_MODE, INACTIVE_MODE, INACTIVE_MODE, INACTIVE_MODE, | 304 | INACTIVE_MODE, INACTIVE_MODE, INACTIVE_MODE, INACTIVE_MODE, |
@@ -198,6 +334,8 @@ static struct davinci_mmc_config da850_mmc_config = { | |||
198 | .get_ro = da850_evm_mmc_get_ro, | 334 | .get_ro = da850_evm_mmc_get_ro, |
199 | .get_cd = da850_evm_mmc_get_cd, | 335 | .get_cd = da850_evm_mmc_get_cd, |
200 | .wires = 4, | 336 | .wires = 4, |
337 | .max_freq = 50000000, | ||
338 | .caps = MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED, | ||
201 | .version = MMC_CTLR_VERSION_2, | 339 | .version = MMC_CTLR_VERSION_2, |
202 | }; | 340 | }; |
203 | 341 | ||
@@ -233,56 +371,227 @@ static int da850_lcd_hw_init(void) | |||
233 | return 0; | 371 | return 0; |
234 | } | 372 | } |
235 | 373 | ||
236 | #define DA8XX_AEMIF_CE2CFG_OFFSET 0x10 | 374 | /* TPS65070 voltage regulator support */ |
237 | #define DA8XX_AEMIF_ASIZE_16BIT 0x1 | ||
238 | 375 | ||
239 | static void __init da850_evm_init_nor(void) | 376 | /* 3.3V */ |
240 | { | 377 | struct regulator_consumer_supply tps65070_dcdc1_consumers[] = { |
241 | void __iomem *aemif_addr; | 378 | { |
379 | .supply = "usb0_vdda33", | ||
380 | }, | ||
381 | { | ||
382 | .supply = "usb1_vdda33", | ||
383 | }, | ||
384 | }; | ||
242 | 385 | ||
243 | aemif_addr = ioremap(DA8XX_AEMIF_CTL_BASE, SZ_32K); | 386 | /* 3.3V or 1.8V */ |
387 | struct regulator_consumer_supply tps65070_dcdc2_consumers[] = { | ||
388 | { | ||
389 | .supply = "dvdd3318_a", | ||
390 | }, | ||
391 | { | ||
392 | .supply = "dvdd3318_b", | ||
393 | }, | ||
394 | { | ||
395 | .supply = "dvdd3318_c", | ||
396 | }, | ||
397 | }; | ||
244 | 398 | ||
245 | /* Configure data bus width of CS2 to 16 bit */ | 399 | /* 1.2V */ |
246 | writel(readl(aemif_addr + DA8XX_AEMIF_CE2CFG_OFFSET) | | 400 | struct regulator_consumer_supply tps65070_dcdc3_consumers[] = { |
247 | DA8XX_AEMIF_ASIZE_16BIT, | 401 | { |
248 | aemif_addr + DA8XX_AEMIF_CE2CFG_OFFSET); | 402 | .supply = "cvdd", |
403 | }, | ||
404 | }; | ||
249 | 405 | ||
250 | iounmap(aemif_addr); | 406 | /* 1.8V LDO */ |
251 | } | 407 | struct regulator_consumer_supply tps65070_ldo1_consumers[] = { |
408 | { | ||
409 | .supply = "sata_vddr", | ||
410 | }, | ||
411 | { | ||
412 | .supply = "usb0_vdda18", | ||
413 | }, | ||
414 | { | ||
415 | .supply = "usb1_vdda18", | ||
416 | }, | ||
417 | { | ||
418 | .supply = "ddr_dvdd18", | ||
419 | }, | ||
420 | }; | ||
252 | 421 | ||
253 | #if defined(CONFIG_MTD_PHYSMAP) || \ | 422 | /* 1.2V LDO */ |
254 | defined(CONFIG_MTD_PHYSMAP_MODULE) | 423 | struct regulator_consumer_supply tps65070_ldo2_consumers[] = { |
255 | #define HAS_NOR 1 | 424 | { |
256 | #else | 425 | .supply = "sata_vdd", |
257 | #define HAS_NOR 0 | 426 | }, |
258 | #endif | 427 | { |
428 | .supply = "pll0_vdda", | ||
429 | }, | ||
430 | { | ||
431 | .supply = "pll1_vdda", | ||
432 | }, | ||
433 | { | ||
434 | .supply = "usbs_cvdd", | ||
435 | }, | ||
436 | { | ||
437 | .supply = "vddarnwa1", | ||
438 | }, | ||
439 | }; | ||
259 | 440 | ||
260 | #if defined(CONFIG_MMC_DAVINCI) || \ | 441 | struct regulator_init_data tps65070_regulator_data[] = { |
261 | defined(CONFIG_MMC_DAVINCI_MODULE) | 442 | /* dcdc1 */ |
262 | #define HAS_MMC 1 | 443 | { |
263 | #else | 444 | .constraints = { |
264 | #define HAS_MMC 0 | 445 | .min_uV = 3150000, |
265 | #endif | 446 | .max_uV = 3450000, |
447 | .valid_ops_mask = (REGULATOR_CHANGE_VOLTAGE | | ||
448 | REGULATOR_CHANGE_STATUS), | ||
449 | .boot_on = 1, | ||
450 | }, | ||
451 | .num_consumer_supplies = ARRAY_SIZE(tps65070_dcdc1_consumers), | ||
452 | .consumer_supplies = tps65070_dcdc1_consumers, | ||
453 | }, | ||
266 | 454 | ||
267 | static __init void da850_evm_init(void) | 455 | /* dcdc2 */ |
456 | { | ||
457 | .constraints = { | ||
458 | .min_uV = 1710000, | ||
459 | .max_uV = 3450000, | ||
460 | .valid_ops_mask = (REGULATOR_CHANGE_VOLTAGE | | ||
461 | REGULATOR_CHANGE_STATUS), | ||
462 | .boot_on = 1, | ||
463 | }, | ||
464 | .num_consumer_supplies = ARRAY_SIZE(tps65070_dcdc2_consumers), | ||
465 | .consumer_supplies = tps65070_dcdc2_consumers, | ||
466 | }, | ||
467 | |||
468 | /* dcdc3 */ | ||
469 | { | ||
470 | .constraints = { | ||
471 | .min_uV = 950000, | ||
472 | .max_uV = 1320000, | ||
473 | .valid_ops_mask = (REGULATOR_CHANGE_VOLTAGE | | ||
474 | REGULATOR_CHANGE_STATUS), | ||
475 | .boot_on = 1, | ||
476 | }, | ||
477 | .num_consumer_supplies = ARRAY_SIZE(tps65070_dcdc3_consumers), | ||
478 | .consumer_supplies = tps65070_dcdc3_consumers, | ||
479 | }, | ||
480 | |||
481 | /* ldo1 */ | ||
482 | { | ||
483 | .constraints = { | ||
484 | .min_uV = 1710000, | ||
485 | .max_uV = 1890000, | ||
486 | .valid_ops_mask = (REGULATOR_CHANGE_VOLTAGE | | ||
487 | REGULATOR_CHANGE_STATUS), | ||
488 | .boot_on = 1, | ||
489 | }, | ||
490 | .num_consumer_supplies = ARRAY_SIZE(tps65070_ldo1_consumers), | ||
491 | .consumer_supplies = tps65070_ldo1_consumers, | ||
492 | }, | ||
493 | |||
494 | /* ldo2 */ | ||
495 | { | ||
496 | .constraints = { | ||
497 | .min_uV = 1140000, | ||
498 | .max_uV = 1320000, | ||
499 | .valid_ops_mask = (REGULATOR_CHANGE_VOLTAGE | | ||
500 | REGULATOR_CHANGE_STATUS), | ||
501 | .boot_on = 1, | ||
502 | }, | ||
503 | .num_consumer_supplies = ARRAY_SIZE(tps65070_ldo2_consumers), | ||
504 | .consumer_supplies = tps65070_ldo2_consumers, | ||
505 | }, | ||
506 | }; | ||
507 | |||
508 | static struct i2c_board_info __initdata da850evm_tps65070_info[] = { | ||
509 | { | ||
510 | I2C_BOARD_INFO("tps6507x", 0x48), | ||
511 | .platform_data = &tps65070_regulator_data[0], | ||
512 | }, | ||
513 | }; | ||
514 | |||
515 | static int __init pmic_tps65070_init(void) | ||
268 | { | 516 | { |
269 | struct davinci_soc_info *soc_info = &davinci_soc_info; | 517 | return i2c_register_board_info(1, da850evm_tps65070_info, |
518 | ARRAY_SIZE(da850evm_tps65070_info)); | ||
519 | } | ||
520 | |||
521 | static const short da850_evm_lcdc_pins[] = { | ||
522 | DA850_GPIO2_8, DA850_GPIO2_15, | ||
523 | -1 | ||
524 | }; | ||
525 | |||
526 | static int __init da850_evm_config_emac(void) | ||
527 | { | ||
528 | void __iomem *cfg_chip3_base; | ||
270 | int ret; | 529 | int ret; |
530 | u32 val; | ||
531 | struct davinci_soc_info *soc_info = &davinci_soc_info; | ||
532 | u8 rmii_en = soc_info->emac_pdata->rmii_en; | ||
533 | |||
534 | if (!machine_is_davinci_da850_evm()) | ||
535 | return 0; | ||
536 | |||
537 | cfg_chip3_base = DA8XX_SYSCFG_VIRT(DA8XX_CFGCHIP3_REG); | ||
538 | |||
539 | val = __raw_readl(cfg_chip3_base); | ||
540 | |||
541 | if (rmii_en) { | ||
542 | val |= BIT(8); | ||
543 | ret = da8xx_pinmux_setup(da850_rmii_pins); | ||
544 | pr_info("EMAC: RMII PHY configured, MII PHY will not be" | ||
545 | " functional\n"); | ||
546 | } else { | ||
547 | val &= ~BIT(8); | ||
548 | ret = da8xx_pinmux_setup(da850_cpgmac_pins); | ||
549 | pr_info("EMAC: MII PHY configured, RMII PHY will not be" | ||
550 | " functional\n"); | ||
551 | } | ||
271 | 552 | ||
272 | ret = da8xx_pinmux_setup(da850_nand_pins); | ||
273 | if (ret) | 553 | if (ret) |
274 | pr_warning("da850_evm_init: nand mux setup failed: %d\n", | 554 | pr_warning("da850_evm_init: cpgmac/rmii mux setup failed: %d\n", |
275 | ret); | 555 | ret); |
276 | 556 | ||
277 | ret = da8xx_pinmux_setup(da850_nor_pins); | 557 | /* configure the CFGCHIP3 register for RMII or MII */ |
558 | __raw_writel(val, cfg_chip3_base); | ||
559 | |||
560 | ret = davinci_cfg_reg(DA850_GPIO2_6); | ||
278 | if (ret) | 561 | if (ret) |
279 | pr_warning("da850_evm_init: nor mux setup failed: %d\n", | 562 | pr_warning("da850_evm_init:GPIO(2,6) mux setup " |
563 | "failed\n"); | ||
564 | |||
565 | ret = gpio_request(DA850_MII_MDIO_CLKEN_PIN, "mdio_clk_en"); | ||
566 | if (ret) { | ||
567 | pr_warning("Cannot open GPIO %d\n", | ||
568 | DA850_MII_MDIO_CLKEN_PIN); | ||
569 | return ret; | ||
570 | } | ||
571 | |||
572 | /* Enable/Disable MII MDIO clock */ | ||
573 | gpio_direction_output(DA850_MII_MDIO_CLKEN_PIN, rmii_en); | ||
574 | |||
575 | soc_info->emac_pdata->phy_mask = DA850_EVM_PHY_MASK; | ||
576 | soc_info->emac_pdata->mdio_max_freq = DA850_EVM_MDIO_FREQUENCY; | ||
577 | |||
578 | ret = da8xx_register_emac(); | ||
579 | if (ret) | ||
580 | pr_warning("da850_evm_init: emac registration failed: %d\n", | ||
280 | ret); | 581 | ret); |
281 | 582 | ||
282 | da850_evm_init_nor(); | 583 | return 0; |
584 | } | ||
585 | device_initcall(da850_evm_config_emac); | ||
586 | |||
587 | static __init void da850_evm_init(void) | ||
588 | { | ||
589 | int ret; | ||
283 | 590 | ||
284 | platform_add_devices(da850_evm_devices, | 591 | ret = pmic_tps65070_init(); |
285 | ARRAY_SIZE(da850_evm_devices)); | 592 | if (ret) |
593 | pr_warning("da850_evm_init: TPS65070 PMIC init failed: %d\n", | ||
594 | ret); | ||
286 | 595 | ||
287 | ret = da8xx_register_edma(); | 596 | ret = da8xx_register_edma(); |
288 | if (ret) | 597 | if (ret) |
@@ -299,19 +608,6 @@ static __init void da850_evm_init(void) | |||
299 | pr_warning("da850_evm_init: i2c0 registration failed: %d\n", | 608 | pr_warning("da850_evm_init: i2c0 registration failed: %d\n", |
300 | ret); | 609 | ret); |
301 | 610 | ||
302 | soc_info->emac_pdata->phy_mask = DA850_EVM_PHY_MASK; | ||
303 | soc_info->emac_pdata->mdio_max_freq = DA850_EVM_MDIO_FREQUENCY; | ||
304 | soc_info->emac_pdata->rmii_en = 0; | ||
305 | |||
306 | ret = da8xx_pinmux_setup(da850_cpgmac_pins); | ||
307 | if (ret) | ||
308 | pr_warning("da850_evm_init: cpgmac mux setup failed: %d\n", | ||
309 | ret); | ||
310 | |||
311 | ret = da8xx_register_emac(); | ||
312 | if (ret) | ||
313 | pr_warning("da850_evm_init: emac registration failed: %d\n", | ||
314 | ret); | ||
315 | 611 | ||
316 | ret = da8xx_register_watchdog(); | 612 | ret = da8xx_register_watchdog(); |
317 | if (ret) | 613 | if (ret) |
@@ -319,11 +615,6 @@ static __init void da850_evm_init(void) | |||
319 | ret); | 615 | ret); |
320 | 616 | ||
321 | if (HAS_MMC) { | 617 | if (HAS_MMC) { |
322 | if (HAS_NOR) | ||
323 | pr_warning("WARNING: both NOR Flash and MMC/SD are " | ||
324 | "enabled, but they share AEMIF pins.\n" | ||
325 | "\tDisable one of them.\n"); | ||
326 | |||
327 | ret = da8xx_pinmux_setup(da850_mmcsd0_pins); | 618 | ret = da8xx_pinmux_setup(da850_mmcsd0_pins); |
328 | if (ret) | 619 | if (ret) |
329 | pr_warning("da850_evm_init: mmcsd0 mux setup failed:" | 620 | pr_warning("da850_evm_init: mmcsd0 mux setup failed:" |
@@ -365,22 +656,42 @@ static __init void da850_evm_init(void) | |||
365 | pr_warning("da850_evm_init: mcasp mux setup failed: %d\n", | 656 | pr_warning("da850_evm_init: mcasp mux setup failed: %d\n", |
366 | ret); | 657 | ret); |
367 | 658 | ||
368 | da8xx_init_mcasp(0, &da850_evm_snd_data); | 659 | da8xx_register_mcasp(0, &da850_evm_snd_data); |
369 | 660 | ||
370 | ret = da8xx_pinmux_setup(da850_lcdcntl_pins); | 661 | ret = da8xx_pinmux_setup(da850_lcdcntl_pins); |
371 | if (ret) | 662 | if (ret) |
372 | pr_warning("da850_evm_init: lcdcntl mux setup failed: %d\n", | 663 | pr_warning("da850_evm_init: lcdcntl mux setup failed: %d\n", |
373 | ret); | 664 | ret); |
374 | 665 | ||
666 | /* Handle board specific muxing for LCD here */ | ||
667 | ret = da8xx_pinmux_setup(da850_evm_lcdc_pins); | ||
668 | if (ret) | ||
669 | pr_warning("da850_evm_init: evm specific lcd mux setup " | ||
670 | "failed: %d\n", ret); | ||
671 | |||
375 | ret = da850_lcd_hw_init(); | 672 | ret = da850_lcd_hw_init(); |
376 | if (ret) | 673 | if (ret) |
377 | pr_warning("da850_evm_init: lcd initialization failed: %d\n", | 674 | pr_warning("da850_evm_init: lcd initialization failed: %d\n", |
378 | ret); | 675 | ret); |
379 | 676 | ||
380 | ret = da8xx_register_lcdc(); | 677 | ret = da8xx_register_lcdc(&sharp_lk043t1dg01_pdata); |
381 | if (ret) | 678 | if (ret) |
382 | pr_warning("da850_evm_init: lcdc registration failed: %d\n", | 679 | pr_warning("da850_evm_init: lcdc registration failed: %d\n", |
383 | ret); | 680 | ret); |
681 | |||
682 | ret = da8xx_register_rtc(); | ||
683 | if (ret) | ||
684 | pr_warning("da850_evm_init: rtc setup failed: %d\n", ret); | ||
685 | |||
686 | ret = da850_register_cpufreq(); | ||
687 | if (ret) | ||
688 | pr_warning("da850_evm_init: cpufreq registration failed: %d\n", | ||
689 | ret); | ||
690 | |||
691 | ret = da8xx_register_cpuidle(); | ||
692 | if (ret) | ||
693 | pr_warning("da850_evm_init: cpuidle registration failed: %d\n", | ||
694 | ret); | ||
384 | } | 695 | } |
385 | 696 | ||
386 | #ifdef CONFIG_SERIAL_8250_CONSOLE | 697 | #ifdef CONFIG_SERIAL_8250_CONSOLE |
diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c index 77e806798822..a9b650dcc172 100644 --- a/arch/arm/mach-davinci/board-dm355-evm.c +++ b/arch/arm/mach-davinci/board-dm355-evm.c | |||
@@ -9,15 +9,13 @@ | |||
9 | * or implied. | 9 | * or implied. |
10 | */ | 10 | */ |
11 | #include <linux/kernel.h> | 11 | #include <linux/kernel.h> |
12 | #include <linux/module.h> | ||
13 | #include <linux/init.h> | 12 | #include <linux/init.h> |
14 | #include <linux/dma-mapping.h> | 13 | #include <linux/err.h> |
15 | #include <linux/platform_device.h> | 14 | #include <linux/platform_device.h> |
16 | #include <linux/mtd/mtd.h> | 15 | #include <linux/mtd/mtd.h> |
17 | #include <linux/mtd/partitions.h> | 16 | #include <linux/mtd/partitions.h> |
18 | #include <linux/mtd/nand.h> | 17 | #include <linux/mtd/nand.h> |
19 | #include <linux/i2c.h> | 18 | #include <linux/i2c.h> |
20 | #include <linux/io.h> | ||
21 | #include <linux/gpio.h> | 19 | #include <linux/gpio.h> |
22 | #include <linux/clk.h> | 20 | #include <linux/clk.h> |
23 | #include <linux/videodev2.h> | 21 | #include <linux/videodev2.h> |
@@ -25,20 +23,15 @@ | |||
25 | #include <linux/spi/spi.h> | 23 | #include <linux/spi/spi.h> |
26 | #include <linux/spi/eeprom.h> | 24 | #include <linux/spi/eeprom.h> |
27 | 25 | ||
28 | #include <asm/setup.h> | ||
29 | #include <asm/mach-types.h> | 26 | #include <asm/mach-types.h> |
30 | #include <asm/mach/arch.h> | 27 | #include <asm/mach/arch.h> |
31 | #include <asm/mach/map.h> | ||
32 | #include <asm/mach/flash.h> | ||
33 | 28 | ||
34 | #include <mach/hardware.h> | ||
35 | #include <mach/dm355.h> | 29 | #include <mach/dm355.h> |
36 | #include <mach/psc.h> | ||
37 | #include <mach/common.h> | ||
38 | #include <mach/i2c.h> | 30 | #include <mach/i2c.h> |
39 | #include <mach/serial.h> | 31 | #include <mach/serial.h> |
40 | #include <mach/nand.h> | 32 | #include <mach/nand.h> |
41 | #include <mach/mmc.h> | 33 | #include <mach/mmc.h> |
34 | #include <mach/usb.h> | ||
42 | 35 | ||
43 | #define DAVINCI_ASYNC_EMIF_CONTROL_BASE 0x01e10000 | 36 | #define DAVINCI_ASYNC_EMIF_CONTROL_BASE 0x01e10000 |
44 | #define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE 0x02000000 | 37 | #define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE 0x02000000 |
@@ -86,8 +79,9 @@ static struct davinci_nand_pdata davinci_nand_data = { | |||
86 | .mask_chipsel = BIT(14), | 79 | .mask_chipsel = BIT(14), |
87 | .parts = davinci_nand_partitions, | 80 | .parts = davinci_nand_partitions, |
88 | .nr_parts = ARRAY_SIZE(davinci_nand_partitions), | 81 | .nr_parts = ARRAY_SIZE(davinci_nand_partitions), |
89 | .ecc_mode = NAND_ECC_HW_SYNDROME, | 82 | .ecc_mode = NAND_ECC_HW, |
90 | .options = NAND_USE_FLASH_BBT, | 83 | .options = NAND_USE_FLASH_BBT, |
84 | .ecc_bits = 4, | ||
91 | }; | 85 | }; |
92 | 86 | ||
93 | static struct resource davinci_nand_resources[] = { | 87 | static struct resource davinci_nand_resources[] = { |
@@ -344,7 +338,7 @@ static __init void dm355_evm_init(void) | |||
344 | gpio_request(2, "usb_id_toggle"); | 338 | gpio_request(2, "usb_id_toggle"); |
345 | gpio_direction_output(2, USB_ID_VALUE); | 339 | gpio_direction_output(2, USB_ID_VALUE); |
346 | /* irlml6401 switches over 1A in under 8 msec */ | 340 | /* irlml6401 switches over 1A in under 8 msec */ |
347 | setup_usb(500, 8); | 341 | davinci_setup_usb(1000, 8); |
348 | 342 | ||
349 | davinci_setup_mmc(0, &dm355evm_mmc_config); | 343 | davinci_setup_mmc(0, &dm355evm_mmc_config); |
350 | davinci_setup_mmc(1, &dm355evm_mmc_config); | 344 | davinci_setup_mmc(1, &dm355evm_mmc_config); |
diff --git a/arch/arm/mach-davinci/board-dm355-leopard.c b/arch/arm/mach-davinci/board-dm355-leopard.c index 84ad5d161a87..21f32eb41e8c 100644 --- a/arch/arm/mach-davinci/board-dm355-leopard.c +++ b/arch/arm/mach-davinci/board-dm355-leopard.c | |||
@@ -8,34 +8,27 @@ | |||
8 | * warranty of any kind, whether express or implied. | 8 | * warranty of any kind, whether express or implied. |
9 | */ | 9 | */ |
10 | #include <linux/kernel.h> | 10 | #include <linux/kernel.h> |
11 | #include <linux/module.h> | ||
12 | #include <linux/init.h> | 11 | #include <linux/init.h> |
13 | #include <linux/dma-mapping.h> | 12 | #include <linux/err.h> |
14 | #include <linux/platform_device.h> | 13 | #include <linux/platform_device.h> |
15 | #include <linux/mtd/mtd.h> | 14 | #include <linux/mtd/mtd.h> |
16 | #include <linux/mtd/partitions.h> | 15 | #include <linux/mtd/partitions.h> |
17 | #include <linux/mtd/nand.h> | 16 | #include <linux/mtd/nand.h> |
18 | #include <linux/i2c.h> | 17 | #include <linux/i2c.h> |
19 | #include <linux/io.h> | ||
20 | #include <linux/gpio.h> | 18 | #include <linux/gpio.h> |
21 | #include <linux/clk.h> | 19 | #include <linux/clk.h> |
22 | #include <linux/spi/spi.h> | 20 | #include <linux/spi/spi.h> |
23 | #include <linux/spi/eeprom.h> | 21 | #include <linux/spi/eeprom.h> |
24 | 22 | ||
25 | #include <asm/setup.h> | ||
26 | #include <asm/mach-types.h> | 23 | #include <asm/mach-types.h> |
27 | #include <asm/mach/arch.h> | 24 | #include <asm/mach/arch.h> |
28 | #include <asm/mach/map.h> | ||
29 | #include <asm/mach/flash.h> | ||
30 | 25 | ||
31 | #include <mach/hardware.h> | ||
32 | #include <mach/dm355.h> | 26 | #include <mach/dm355.h> |
33 | #include <mach/psc.h> | ||
34 | #include <mach/common.h> | ||
35 | #include <mach/i2c.h> | 27 | #include <mach/i2c.h> |
36 | #include <mach/serial.h> | 28 | #include <mach/serial.h> |
37 | #include <mach/nand.h> | 29 | #include <mach/nand.h> |
38 | #include <mach/mmc.h> | 30 | #include <mach/mmc.h> |
31 | #include <mach/usb.h> | ||
39 | 32 | ||
40 | #define DAVINCI_ASYNC_EMIF_CONTROL_BASE 0x01e10000 | 33 | #define DAVINCI_ASYNC_EMIF_CONTROL_BASE 0x01e10000 |
41 | #define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE 0x02000000 | 34 | #define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE 0x02000000 |
@@ -270,7 +263,7 @@ static __init void dm355_leopard_init(void) | |||
270 | gpio_request(2, "usb_id_toggle"); | 263 | gpio_request(2, "usb_id_toggle"); |
271 | gpio_direction_output(2, USB_ID_VALUE); | 264 | gpio_direction_output(2, USB_ID_VALUE); |
272 | /* irlml6401 switches over 1A in under 8 msec */ | 265 | /* irlml6401 switches over 1A in under 8 msec */ |
273 | setup_usb(500, 8); | 266 | davinci_setup_usb(1000, 8); |
274 | 267 | ||
275 | davinci_setup_mmc(0, &dm355leopard_mmc_config); | 268 | davinci_setup_mmc(0, &dm355leopard_mmc_config); |
276 | davinci_setup_mmc(1, &dm355leopard_mmc_config); | 269 | davinci_setup_mmc(1, &dm355leopard_mmc_config); |
diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c index 52dd8046b305..289fe1b7d25a 100644 --- a/arch/arm/mach-davinci/board-dm365-evm.c +++ b/arch/arm/mach-davinci/board-dm365-evm.c | |||
@@ -13,9 +13,8 @@ | |||
13 | * GNU General Public License for more details. | 13 | * GNU General Public License for more details. |
14 | */ | 14 | */ |
15 | #include <linux/kernel.h> | 15 | #include <linux/kernel.h> |
16 | #include <linux/module.h> | ||
17 | #include <linux/init.h> | 16 | #include <linux/init.h> |
18 | #include <linux/dma-mapping.h> | 17 | #include <linux/err.h> |
19 | #include <linux/i2c.h> | 18 | #include <linux/i2c.h> |
20 | #include <linux/io.h> | 19 | #include <linux/io.h> |
21 | #include <linux/clk.h> | 20 | #include <linux/clk.h> |
@@ -24,20 +23,19 @@ | |||
24 | #include <linux/mtd/mtd.h> | 23 | #include <linux/mtd/mtd.h> |
25 | #include <linux/mtd/partitions.h> | 24 | #include <linux/mtd/partitions.h> |
26 | #include <linux/mtd/nand.h> | 25 | #include <linux/mtd/nand.h> |
27 | #include <asm/setup.h> | 26 | #include <linux/input.h> |
27 | |||
28 | #include <asm/mach-types.h> | 28 | #include <asm/mach-types.h> |
29 | #include <asm/mach/arch.h> | 29 | #include <asm/mach/arch.h> |
30 | #include <asm/mach/map.h> | 30 | |
31 | #include <mach/mux.h> | 31 | #include <mach/mux.h> |
32 | #include <mach/hardware.h> | ||
33 | #include <mach/dm365.h> | 32 | #include <mach/dm365.h> |
34 | #include <mach/psc.h> | ||
35 | #include <mach/common.h> | 33 | #include <mach/common.h> |
36 | #include <mach/i2c.h> | 34 | #include <mach/i2c.h> |
37 | #include <mach/serial.h> | 35 | #include <mach/serial.h> |
38 | #include <mach/mmc.h> | 36 | #include <mach/mmc.h> |
39 | #include <mach/nand.h> | 37 | #include <mach/nand.h> |
40 | 38 | #include <mach/keyscan.h> | |
41 | 39 | ||
42 | static inline int have_imager(void) | 40 | static inline int have_imager(void) |
43 | { | 41 | { |
@@ -144,6 +142,7 @@ static struct davinci_nand_pdata davinci_nand_data = { | |||
144 | .nr_parts = ARRAY_SIZE(davinci_nand_partitions), | 142 | .nr_parts = ARRAY_SIZE(davinci_nand_partitions), |
145 | .ecc_mode = NAND_ECC_HW, | 143 | .ecc_mode = NAND_ECC_HW, |
146 | .options = NAND_USE_FLASH_BBT, | 144 | .options = NAND_USE_FLASH_BBT, |
145 | .ecc_bits = 4, | ||
147 | }; | 146 | }; |
148 | 147 | ||
149 | static struct resource davinci_nand_resources[] = { | 148 | static struct resource davinci_nand_resources[] = { |
@@ -176,11 +175,16 @@ static struct at24_platform_data eeprom_info = { | |||
176 | .context = (void *)0x7f00, | 175 | .context = (void *)0x7f00, |
177 | }; | 176 | }; |
178 | 177 | ||
178 | static struct snd_platform_data dm365_evm_snd_data; | ||
179 | |||
179 | static struct i2c_board_info i2c_info[] = { | 180 | static struct i2c_board_info i2c_info[] = { |
180 | { | 181 | { |
181 | I2C_BOARD_INFO("24c256", 0x50), | 182 | I2C_BOARD_INFO("24c256", 0x50), |
182 | .platform_data = &eeprom_info, | 183 | .platform_data = &eeprom_info, |
183 | }, | 184 | }, |
185 | { | ||
186 | I2C_BOARD_INFO("tlv320aic3x", 0x18), | ||
187 | }, | ||
184 | }; | 188 | }; |
185 | 189 | ||
186 | static struct davinci_i2c_platform_data i2c_pdata = { | 190 | static struct davinci_i2c_platform_data i2c_pdata = { |
@@ -188,6 +192,38 @@ static struct davinci_i2c_platform_data i2c_pdata = { | |||
188 | .bus_delay = 0 /* usec */, | 192 | .bus_delay = 0 /* usec */, |
189 | }; | 193 | }; |
190 | 194 | ||
195 | #ifdef CONFIG_KEYBOARD_DAVINCI | ||
196 | static unsigned short dm365evm_keymap[] = { | ||
197 | KEY_KP2, | ||
198 | KEY_LEFT, | ||
199 | KEY_EXIT, | ||
200 | KEY_DOWN, | ||
201 | KEY_ENTER, | ||
202 | KEY_UP, | ||
203 | KEY_KP1, | ||
204 | KEY_RIGHT, | ||
205 | KEY_MENU, | ||
206 | KEY_RECORD, | ||
207 | KEY_REWIND, | ||
208 | KEY_KPMINUS, | ||
209 | KEY_STOP, | ||
210 | KEY_FASTFORWARD, | ||
211 | KEY_KPPLUS, | ||
212 | KEY_PLAYPAUSE, | ||
213 | 0 | ||
214 | }; | ||
215 | |||
216 | static struct davinci_ks_platform_data dm365evm_ks_data = { | ||
217 | .keymap = dm365evm_keymap, | ||
218 | .keymapsize = ARRAY_SIZE(dm365evm_keymap), | ||
219 | .rep = 1, | ||
220 | /* Scan period = strobe + interval */ | ||
221 | .strobe = 0x5, | ||
222 | .interval = 0x2, | ||
223 | .matrix_type = DAVINCI_KEYSCAN_MATRIX_4X4, | ||
224 | }; | ||
225 | #endif | ||
226 | |||
191 | static int cpld_mmc_get_cd(int module) | 227 | static int cpld_mmc_get_cd(int module) |
192 | { | 228 | { |
193 | if (!cpld) | 229 | if (!cpld) |
@@ -472,6 +508,13 @@ static __init void dm365_evm_init(void) | |||
472 | 508 | ||
473 | /* maybe setup mmc1/etc ... _after_ mmc0 */ | 509 | /* maybe setup mmc1/etc ... _after_ mmc0 */ |
474 | evm_init_cpld(); | 510 | evm_init_cpld(); |
511 | |||
512 | dm365_init_asp(&dm365_evm_snd_data); | ||
513 | dm365_init_rtc(); | ||
514 | |||
515 | #ifdef CONFIG_KEYBOARD_DAVINCI | ||
516 | dm365_init_ks(&dm365evm_ks_data); | ||
517 | #endif | ||
475 | } | 518 | } |
476 | 519 | ||
477 | static __init void dm365_evm_irq_init(void) | 520 | static __init void dm365_evm_irq_init(void) |
diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c index 1213a0087ad4..fd0398bc6db3 100644 --- a/arch/arm/mach-davinci/board-dm644x-evm.c +++ b/arch/arm/mach-davinci/board-dm644x-evm.c | |||
@@ -9,45 +9,34 @@ | |||
9 | * or implied. | 9 | * or implied. |
10 | */ | 10 | */ |
11 | #include <linux/kernel.h> | 11 | #include <linux/kernel.h> |
12 | #include <linux/module.h> | ||
13 | #include <linux/init.h> | 12 | #include <linux/init.h> |
14 | #include <linux/dma-mapping.h> | 13 | #include <linux/dma-mapping.h> |
15 | #include <linux/platform_device.h> | 14 | #include <linux/platform_device.h> |
16 | #include <linux/gpio.h> | 15 | #include <linux/gpio.h> |
17 | #include <linux/leds.h> | ||
18 | #include <linux/memory.h> | ||
19 | |||
20 | #include <linux/i2c.h> | 16 | #include <linux/i2c.h> |
21 | #include <linux/i2c/pcf857x.h> | 17 | #include <linux/i2c/pcf857x.h> |
22 | #include <linux/i2c/at24.h> | 18 | #include <linux/i2c/at24.h> |
23 | #include <linux/etherdevice.h> | ||
24 | #include <linux/mtd/mtd.h> | 19 | #include <linux/mtd/mtd.h> |
25 | #include <linux/mtd/nand.h> | 20 | #include <linux/mtd/nand.h> |
26 | #include <linux/mtd/partitions.h> | 21 | #include <linux/mtd/partitions.h> |
27 | #include <linux/mtd/physmap.h> | 22 | #include <linux/mtd/physmap.h> |
28 | #include <linux/io.h> | ||
29 | #include <linux/phy.h> | 23 | #include <linux/phy.h> |
30 | #include <linux/clk.h> | 24 | #include <linux/clk.h> |
31 | #include <linux/videodev2.h> | 25 | #include <linux/videodev2.h> |
32 | 26 | ||
33 | #include <media/tvp514x.h> | 27 | #include <media/tvp514x.h> |
34 | 28 | ||
35 | #include <asm/setup.h> | ||
36 | #include <asm/mach-types.h> | 29 | #include <asm/mach-types.h> |
37 | |||
38 | #include <asm/mach/arch.h> | 30 | #include <asm/mach/arch.h> |
39 | #include <asm/mach/map.h> | ||
40 | #include <asm/mach/flash.h> | ||
41 | 31 | ||
42 | #include <mach/dm644x.h> | 32 | #include <mach/dm644x.h> |
43 | #include <mach/common.h> | 33 | #include <mach/common.h> |
44 | #include <mach/i2c.h> | 34 | #include <mach/i2c.h> |
45 | #include <mach/serial.h> | 35 | #include <mach/serial.h> |
46 | #include <mach/mux.h> | 36 | #include <mach/mux.h> |
47 | #include <mach/psc.h> | ||
48 | #include <mach/nand.h> | 37 | #include <mach/nand.h> |
49 | #include <mach/mmc.h> | 38 | #include <mach/mmc.h> |
50 | #include <mach/emac.h> | 39 | #include <mach/usb.h> |
51 | 40 | ||
52 | #define DM644X_EVM_PHY_MASK (0x2) | 41 | #define DM644X_EVM_PHY_MASK (0x2) |
53 | #define DM644X_EVM_MDIO_FREQUENCY (2200000) /* PHY bus frequency */ | 42 | #define DM644X_EVM_MDIO_FREQUENCY (2200000) /* PHY bus frequency */ |
@@ -477,7 +466,7 @@ evm_u35_setup(struct i2c_client *client, int gpio, unsigned ngpio, void *c) | |||
477 | /* irlml6401 switches over 1A, in under 8 msec; | 466 | /* irlml6401 switches over 1A, in under 8 msec; |
478 | * now it can be managed by nDRV_VBUS ... | 467 | * now it can be managed by nDRV_VBUS ... |
479 | */ | 468 | */ |
480 | setup_usb(500, 8); | 469 | davinci_setup_usb(1000, 8); |
481 | 470 | ||
482 | return 0; | 471 | return 0; |
483 | } | 472 | } |
diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c index 24e0e13b1492..8d0b0e01c59b 100644 --- a/arch/arm/mach-davinci/board-dm646x-evm.c +++ b/arch/arm/mach-davinci/board-dm646x-evm.c | |||
@@ -17,38 +17,28 @@ | |||
17 | **************************************************************************/ | 17 | **************************************************************************/ |
18 | 18 | ||
19 | #include <linux/kernel.h> | 19 | #include <linux/kernel.h> |
20 | #include <linux/module.h> | ||
21 | #include <linux/init.h> | 20 | #include <linux/init.h> |
22 | #include <linux/fs.h> | ||
23 | #include <linux/major.h> | ||
24 | #include <linux/root_dev.h> | ||
25 | #include <linux/dma-mapping.h> | ||
26 | #include <linux/serial.h> | ||
27 | #include <linux/serial_8250.h> | ||
28 | #include <linux/leds.h> | 21 | #include <linux/leds.h> |
29 | #include <linux/gpio.h> | 22 | #include <linux/gpio.h> |
30 | #include <linux/io.h> | ||
31 | #include <linux/platform_device.h> | 23 | #include <linux/platform_device.h> |
32 | #include <linux/i2c.h> | 24 | #include <linux/i2c.h> |
33 | #include <linux/i2c/at24.h> | 25 | #include <linux/i2c/at24.h> |
34 | #include <linux/i2c/pcf857x.h> | 26 | #include <linux/i2c/pcf857x.h> |
35 | #include <linux/etherdevice.h> | ||
36 | 27 | ||
37 | #include <media/tvp514x.h> | 28 | #include <media/tvp514x.h> |
38 | 29 | ||
39 | #include <asm/setup.h> | 30 | #include <linux/mtd/mtd.h> |
31 | #include <linux/mtd/nand.h> | ||
32 | #include <linux/mtd/partitions.h> | ||
33 | |||
40 | #include <asm/mach-types.h> | 34 | #include <asm/mach-types.h> |
41 | #include <asm/mach/arch.h> | 35 | #include <asm/mach/arch.h> |
42 | #include <asm/mach/map.h> | ||
43 | #include <asm/mach/flash.h> | ||
44 | 36 | ||
45 | #include <mach/dm646x.h> | 37 | #include <mach/dm646x.h> |
46 | #include <mach/common.h> | 38 | #include <mach/common.h> |
47 | #include <mach/psc.h> | ||
48 | #include <mach/serial.h> | 39 | #include <mach/serial.h> |
49 | #include <mach/i2c.h> | 40 | #include <mach/i2c.h> |
50 | #include <mach/mmc.h> | 41 | #include <mach/nand.h> |
51 | #include <mach/emac.h> | ||
52 | 42 | ||
53 | #if defined(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \ | 43 | #if defined(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \ |
54 | defined(CONFIG_BLK_DEV_PALMCHIP_BK3710_MODULE) | 44 | defined(CONFIG_BLK_DEV_PALMCHIP_BK3710_MODULE) |
@@ -57,6 +47,11 @@ | |||
57 | #define HAS_ATA 0 | 47 | #define HAS_ATA 0 |
58 | #endif | 48 | #endif |
59 | 49 | ||
50 | #define DAVINCI_ASYNC_EMIF_CONTROL_BASE 0x20008000 | ||
51 | #define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE 0x42000000 | ||
52 | |||
53 | #define NAND_BLOCK_SIZE SZ_128K | ||
54 | |||
60 | /* CPLD Register 0 bits to control ATA */ | 55 | /* CPLD Register 0 bits to control ATA */ |
61 | #define DM646X_EVM_ATA_RST BIT(0) | 56 | #define DM646X_EVM_ATA_RST BIT(0) |
62 | #define DM646X_EVM_ATA_PWD BIT(1) | 57 | #define DM646X_EVM_ATA_PWD BIT(1) |
@@ -92,6 +87,63 @@ static struct davinci_uart_config uart_config __initdata = { | |||
92 | .enabled_uarts = (1 << 0), | 87 | .enabled_uarts = (1 << 0), |
93 | }; | 88 | }; |
94 | 89 | ||
90 | /* Note: We are setting first partition as 'bootloader' constituting UBL, U-Boot | ||
91 | * and U-Boot environment this avoids dependency on any particular combination | ||
92 | * of UBL, U-Boot or flashing tools etc. | ||
93 | */ | ||
94 | static struct mtd_partition davinci_nand_partitions[] = { | ||
95 | { | ||
96 | /* UBL, U-Boot with environment */ | ||
97 | .name = "bootloader", | ||
98 | .offset = MTDPART_OFS_APPEND, | ||
99 | .size = 16 * NAND_BLOCK_SIZE, | ||
100 | .mask_flags = MTD_WRITEABLE, /* force read-only */ | ||
101 | }, { | ||
102 | .name = "kernel", | ||
103 | .offset = MTDPART_OFS_APPEND, | ||
104 | .size = SZ_4M, | ||
105 | .mask_flags = 0, | ||
106 | }, { | ||
107 | .name = "filesystem", | ||
108 | .offset = MTDPART_OFS_APPEND, | ||
109 | .size = MTDPART_SIZ_FULL, | ||
110 | .mask_flags = 0, | ||
111 | } | ||
112 | }; | ||
113 | |||
114 | static struct davinci_nand_pdata davinci_nand_data = { | ||
115 | .mask_cle = 0x80000, | ||
116 | .mask_ale = 0x40000, | ||
117 | .parts = davinci_nand_partitions, | ||
118 | .nr_parts = ARRAY_SIZE(davinci_nand_partitions), | ||
119 | .ecc_mode = NAND_ECC_HW, | ||
120 | .options = 0, | ||
121 | }; | ||
122 | |||
123 | static struct resource davinci_nand_resources[] = { | ||
124 | { | ||
125 | .start = DAVINCI_ASYNC_EMIF_DATA_CE0_BASE, | ||
126 | .end = DAVINCI_ASYNC_EMIF_DATA_CE0_BASE + SZ_32M - 1, | ||
127 | .flags = IORESOURCE_MEM, | ||
128 | }, { | ||
129 | .start = DAVINCI_ASYNC_EMIF_CONTROL_BASE, | ||
130 | .end = DAVINCI_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1, | ||
131 | .flags = IORESOURCE_MEM, | ||
132 | }, | ||
133 | }; | ||
134 | |||
135 | static struct platform_device davinci_nand_device = { | ||
136 | .name = "davinci_nand", | ||
137 | .id = 0, | ||
138 | |||
139 | .num_resources = ARRAY_SIZE(davinci_nand_resources), | ||
140 | .resource = davinci_nand_resources, | ||
141 | |||
142 | .dev = { | ||
143 | .platform_data = &davinci_nand_data, | ||
144 | }, | ||
145 | }; | ||
146 | |||
95 | /* CPLD Register 0 Client: used for I/O Control */ | 147 | /* CPLD Register 0 Client: used for I/O Control */ |
96 | static int cpld_reg0_probe(struct i2c_client *client, | 148 | static int cpld_reg0_probe(struct i2c_client *client, |
97 | const struct i2c_device_id *id) | 149 | const struct i2c_device_id *id) |
@@ -142,7 +194,7 @@ static struct gpio_led evm_leds[] = { | |||
142 | { .name = "DS4", .active_low = 1, }, | 194 | { .name = "DS4", .active_low = 1, }, |
143 | }; | 195 | }; |
144 | 196 | ||
145 | static __initconst struct gpio_led_platform_data evm_led_data = { | 197 | static const struct gpio_led_platform_data evm_led_data = { |
146 | .num_leds = ARRAY_SIZE(evm_leds), | 198 | .num_leds = ARRAY_SIZE(evm_leds), |
147 | .leds = evm_leds, | 199 | .leds = evm_leds, |
148 | }; | 200 | }; |
@@ -647,6 +699,8 @@ static __init void evm_init(void) | |||
647 | dm646x_init_mcasp0(&dm646x_evm_snd_data[0]); | 699 | dm646x_init_mcasp0(&dm646x_evm_snd_data[0]); |
648 | dm646x_init_mcasp1(&dm646x_evm_snd_data[1]); | 700 | dm646x_init_mcasp1(&dm646x_evm_snd_data[1]); |
649 | 701 | ||
702 | platform_device_register(&davinci_nand_device); | ||
703 | |||
650 | if (HAS_ATA) | 704 | if (HAS_ATA) |
651 | dm646x_init_ide(); | 705 | dm646x_init_ide(); |
652 | 706 | ||
diff --git a/arch/arm/mach-davinci/board-neuros-osd2.c b/arch/arm/mach-davinci/board-neuros-osd2.c new file mode 100644 index 000000000000..bd9ca079b69d --- /dev/null +++ b/arch/arm/mach-davinci/board-neuros-osd2.c | |||
@@ -0,0 +1,323 @@ | |||
1 | /* | ||
2 | * Neuros Technologies OSD2 board support | ||
3 | * | ||
4 | * Modified from original 644X-EVM board support. | ||
5 | * 2008 (c) Neuros Technology, LLC. | ||
6 | * 2009 (c) Jorge Luis Zapata Muga <jorgeluis.zapata@gmail.com> | ||
7 | * 2009 (c) Andrey A. Porodko <Andrey.Porodko@gmail.com> | ||
8 | * | ||
9 | * The Neuros OSD 2.0 is the hardware component of the Neuros Open | ||
10 | * Internet Television Platform. Hardware is very close to TI | ||
11 | * DM644X-EVM board. It has: | ||
12 | * DM6446M02 module with 256MB NAND, 256MB RAM, TLV320AIC32 AIC, | ||
13 | * USB, Ethernet, SD/MMC, UART, THS8200, TVP7000 for video. | ||
14 | * Additionaly realtime clock, IR remote control receiver, | ||
15 | * IR Blaster based on MSP430 (firmware although is different | ||
16 | * from used in DM644X-EVM), internal ATA-6 3.5” HDD drive | ||
17 | * with PATA interface, two muxed red-green leds. | ||
18 | * | ||
19 | * For more information please refer to | ||
20 | * http://wiki.neurostechnology.com/index.php/OSD_2.0_HD | ||
21 | * | ||
22 | * This file is licensed under the terms of the GNU General Public | ||
23 | * License version 2. This program is licensed "as is" without any | ||
24 | * warranty of any kind, whether express or implied. | ||
25 | */ | ||
26 | #include <linux/platform_device.h> | ||
27 | #include <linux/gpio.h> | ||
28 | #include <linux/mtd/partitions.h> | ||
29 | |||
30 | #include <asm/mach-types.h> | ||
31 | #include <asm/mach/arch.h> | ||
32 | |||
33 | #include <mach/dm644x.h> | ||
34 | #include <mach/i2c.h> | ||
35 | #include <mach/serial.h> | ||
36 | #include <mach/mux.h> | ||
37 | #include <mach/nand.h> | ||
38 | #include <mach/mmc.h> | ||
39 | #include <mach/usb.h> | ||
40 | |||
41 | #define NEUROS_OSD2_PHY_MASK 0x2 | ||
42 | #define NEUROS_OSD2_MDIO_FREQUENCY 2200000 /* PHY bus frequency */ | ||
43 | |||
44 | #define DAVINCI_CFC_ATA_BASE 0x01C66000 | ||
45 | |||
46 | #define DAVINCI_ASYNC_EMIF_CONTROL_BASE 0x01e00000 | ||
47 | #define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE 0x02000000 | ||
48 | |||
49 | #define LXT971_PHY_ID 0x001378e2 | ||
50 | #define LXT971_PHY_MASK 0xfffffff0 | ||
51 | |||
52 | #define NTOSD2_AUDIOSOC_I2C_ADDR 0x18 | ||
53 | #define NTOSD2_MSP430_I2C_ADDR 0x59 | ||
54 | #define NTOSD2_MSP430_IRQ 2 | ||
55 | |||
56 | /* Neuros OSD2 has a Samsung 256 MByte NAND flash (Dev ID of 0xAA, | ||
57 | * 2048 blocks in the device, 64 pages per block, 2048 bytes per | ||
58 | * page. | ||
59 | */ | ||
60 | |||
61 | #define NAND_BLOCK_SIZE SZ_128K | ||
62 | |||
63 | struct mtd_partition davinci_ntosd2_nandflash_partition[] = { | ||
64 | { | ||
65 | /* UBL (a few copies) plus U-Boot */ | ||
66 | .name = "bootloader", | ||
67 | .offset = 0, | ||
68 | .size = 15 * NAND_BLOCK_SIZE, | ||
69 | .mask_flags = MTD_WRITEABLE, /* force read-only */ | ||
70 | }, { | ||
71 | /* U-Boot environment */ | ||
72 | .name = "params", | ||
73 | .offset = MTDPART_OFS_APPEND, | ||
74 | .size = 1 * NAND_BLOCK_SIZE, | ||
75 | .mask_flags = 0, | ||
76 | }, { | ||
77 | /* Kernel */ | ||
78 | .name = "kernel", | ||
79 | .offset = MTDPART_OFS_APPEND, | ||
80 | .size = SZ_4M, | ||
81 | .mask_flags = 0, | ||
82 | }, { | ||
83 | /* File System */ | ||
84 | .name = "filesystem", | ||
85 | .offset = MTDPART_OFS_APPEND, | ||
86 | .size = MTDPART_SIZ_FULL, | ||
87 | .mask_flags = 0, | ||
88 | } | ||
89 | /* A few blocks at end hold a flash Bad Block Table. */ | ||
90 | }; | ||
91 | |||
92 | static struct davinci_nand_pdata davinci_ntosd2_nandflash_data = { | ||
93 | .parts = davinci_ntosd2_nandflash_partition, | ||
94 | .nr_parts = ARRAY_SIZE(davinci_ntosd2_nandflash_partition), | ||
95 | .ecc_mode = NAND_ECC_HW, | ||
96 | .options = NAND_USE_FLASH_BBT, | ||
97 | }; | ||
98 | |||
99 | static struct resource davinci_ntosd2_nandflash_resource[] = { | ||
100 | { | ||
101 | .start = DAVINCI_ASYNC_EMIF_DATA_CE0_BASE, | ||
102 | .end = DAVINCI_ASYNC_EMIF_DATA_CE0_BASE + SZ_16M - 1, | ||
103 | .flags = IORESOURCE_MEM, | ||
104 | }, { | ||
105 | .start = DAVINCI_ASYNC_EMIF_CONTROL_BASE, | ||
106 | .end = DAVINCI_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1, | ||
107 | .flags = IORESOURCE_MEM, | ||
108 | }, | ||
109 | }; | ||
110 | |||
111 | static struct platform_device davinci_ntosd2_nandflash_device = { | ||
112 | .name = "davinci_nand", | ||
113 | .id = 0, | ||
114 | .dev = { | ||
115 | .platform_data = &davinci_ntosd2_nandflash_data, | ||
116 | }, | ||
117 | .num_resources = ARRAY_SIZE(davinci_ntosd2_nandflash_resource), | ||
118 | .resource = davinci_ntosd2_nandflash_resource, | ||
119 | }; | ||
120 | |||
121 | static u64 davinci_fb_dma_mask = DMA_BIT_MASK(32); | ||
122 | |||
123 | static struct platform_device davinci_fb_device = { | ||
124 | .name = "davincifb", | ||
125 | .id = -1, | ||
126 | .dev = { | ||
127 | .dma_mask = &davinci_fb_dma_mask, | ||
128 | .coherent_dma_mask = DMA_BIT_MASK(32), | ||
129 | }, | ||
130 | .num_resources = 0, | ||
131 | }; | ||
132 | |||
133 | static struct resource ide_resources[] = { | ||
134 | { | ||
135 | .start = DAVINCI_CFC_ATA_BASE, | ||
136 | .end = DAVINCI_CFC_ATA_BASE + 0x7ff, | ||
137 | .flags = IORESOURCE_MEM, | ||
138 | }, | ||
139 | { | ||
140 | .start = IRQ_IDE, | ||
141 | .end = IRQ_IDE, | ||
142 | .flags = IORESOURCE_IRQ, | ||
143 | }, | ||
144 | }; | ||
145 | |||
146 | static u64 ide_dma_mask = DMA_BIT_MASK(32); | ||
147 | |||
148 | static struct platform_device ide_dev = { | ||
149 | .name = "palm_bk3710", | ||
150 | .id = -1, | ||
151 | .resource = ide_resources, | ||
152 | .num_resources = ARRAY_SIZE(ide_resources), | ||
153 | .dev = { | ||
154 | .dma_mask = &ide_dma_mask, | ||
155 | .coherent_dma_mask = DMA_BIT_MASK(32), | ||
156 | }, | ||
157 | }; | ||
158 | |||
159 | static struct snd_platform_data dm644x_ntosd2_snd_data; | ||
160 | |||
161 | static struct gpio_led ntosd2_leds[] = { | ||
162 | { .name = "led1_green", .gpio = GPIO(10), }, | ||
163 | { .name = "led1_red", .gpio = GPIO(11), }, | ||
164 | { .name = "led2_green", .gpio = GPIO(12), }, | ||
165 | { .name = "led2_red", .gpio = GPIO(13), }, | ||
166 | }; | ||
167 | |||
168 | static struct gpio_led_platform_data ntosd2_leds_data = { | ||
169 | .num_leds = ARRAY_SIZE(ntosd2_leds), | ||
170 | .leds = ntosd2_leds, | ||
171 | }; | ||
172 | |||
173 | static struct platform_device ntosd2_leds_dev = { | ||
174 | .name = "leds-gpio", | ||
175 | .id = -1, | ||
176 | .dev = { | ||
177 | .platform_data = &ntosd2_leds_data, | ||
178 | }, | ||
179 | }; | ||
180 | |||
181 | |||
182 | static struct platform_device *davinci_ntosd2_devices[] __initdata = { | ||
183 | &davinci_fb_device, | ||
184 | &ntosd2_leds_dev, | ||
185 | }; | ||
186 | |||
187 | static struct davinci_uart_config uart_config __initdata = { | ||
188 | .enabled_uarts = (1 << 0), | ||
189 | }; | ||
190 | |||
191 | static void __init davinci_ntosd2_map_io(void) | ||
192 | { | ||
193 | dm644x_init(); | ||
194 | } | ||
195 | |||
196 | /* | ||
197 | I2C initialization | ||
198 | */ | ||
199 | static struct davinci_i2c_platform_data ntosd2_i2c_pdata = { | ||
200 | .bus_freq = 20 /* kHz */, | ||
201 | .bus_delay = 100 /* usec */, | ||
202 | }; | ||
203 | |||
204 | static struct i2c_board_info __initdata ntosd2_i2c_info[] = { | ||
205 | }; | ||
206 | |||
207 | static int ntosd2_init_i2c(void) | ||
208 | { | ||
209 | int status; | ||
210 | |||
211 | davinci_init_i2c(&ntosd2_i2c_pdata); | ||
212 | status = gpio_request(NTOSD2_MSP430_IRQ, ntosd2_i2c_info[0].type); | ||
213 | if (status == 0) { | ||
214 | status = gpio_direction_input(NTOSD2_MSP430_IRQ); | ||
215 | if (status == 0) { | ||
216 | status = gpio_to_irq(NTOSD2_MSP430_IRQ); | ||
217 | if (status > 0) { | ||
218 | ntosd2_i2c_info[0].irq = status; | ||
219 | i2c_register_board_info(1, | ||
220 | ntosd2_i2c_info, | ||
221 | ARRAY_SIZE(ntosd2_i2c_info)); | ||
222 | } | ||
223 | } | ||
224 | } | ||
225 | return status; | ||
226 | } | ||
227 | |||
228 | static struct davinci_mmc_config davinci_ntosd2_mmc_config = { | ||
229 | .wires = 4, | ||
230 | .version = MMC_CTLR_VERSION_1 | ||
231 | }; | ||
232 | |||
233 | |||
234 | #if defined(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \ | ||
235 | defined(CONFIG_BLK_DEV_PALMCHIP_BK3710_MODULE) | ||
236 | #define HAS_ATA 1 | ||
237 | #else | ||
238 | #define HAS_ATA 0 | ||
239 | #endif | ||
240 | |||
241 | #if defined(CONFIG_MTD_NAND_DAVINCI) || \ | ||
242 | defined(CONFIG_MTD_NAND_DAVINCI_MODULE) | ||
243 | #define HAS_NAND 1 | ||
244 | #else | ||
245 | #define HAS_NAND 0 | ||
246 | #endif | ||
247 | |||
248 | static __init void davinci_ntosd2_init(void) | ||
249 | { | ||
250 | struct clk *aemif_clk; | ||
251 | struct davinci_soc_info *soc_info = &davinci_soc_info; | ||
252 | int status; | ||
253 | |||
254 | aemif_clk = clk_get(NULL, "aemif"); | ||
255 | clk_enable(aemif_clk); | ||
256 | |||
257 | if (HAS_ATA) { | ||
258 | if (HAS_NAND) | ||
259 | pr_warning("WARNING: both IDE and Flash are " | ||
260 | "enabled, but they share AEMIF pins.\n" | ||
261 | "\tDisable IDE for NAND/NOR support.\n"); | ||
262 | davinci_cfg_reg(DM644X_HPIEN_DISABLE); | ||
263 | davinci_cfg_reg(DM644X_ATAEN); | ||
264 | davinci_cfg_reg(DM644X_HDIREN); | ||
265 | platform_device_register(&ide_dev); | ||
266 | } else if (HAS_NAND) { | ||
267 | davinci_cfg_reg(DM644X_HPIEN_DISABLE); | ||
268 | davinci_cfg_reg(DM644X_ATAEN_DISABLE); | ||
269 | |||
270 | /* only one device will be jumpered and detected */ | ||
271 | if (HAS_NAND) | ||
272 | platform_device_register( | ||
273 | &davinci_ntosd2_nandflash_device); | ||
274 | } | ||
275 | |||
276 | platform_add_devices(davinci_ntosd2_devices, | ||
277 | ARRAY_SIZE(davinci_ntosd2_devices)); | ||
278 | |||
279 | /* Initialize I2C interface specific for this board */ | ||
280 | status = ntosd2_init_i2c(); | ||
281 | if (status < 0) | ||
282 | pr_warning("davinci_ntosd2_init: msp430 irq setup failed:" | ||
283 | " %d\n", status); | ||
284 | |||
285 | davinci_serial_init(&uart_config); | ||
286 | dm644x_init_asp(&dm644x_ntosd2_snd_data); | ||
287 | |||
288 | soc_info->emac_pdata->phy_mask = NEUROS_OSD2_PHY_MASK; | ||
289 | soc_info->emac_pdata->mdio_max_freq = NEUROS_OSD2_MDIO_FREQUENCY; | ||
290 | |||
291 | davinci_setup_usb(1000, 8); | ||
292 | /* | ||
293 | * Mux the pins to be GPIOs, VLYNQEN is already done at startup. | ||
294 | * The AEAWx are five new AEAW pins that can be muxed by separately. | ||
295 | * They are a bitmask for GPIO management. According TI | ||
296 | * documentation (http://www.ti.com/lit/gpn/tms320dm6446) to employ | ||
297 | * gpio(10,11,12,13) for leds any combination of bits works except | ||
298 | * four last. So we are to reset all five. | ||
299 | */ | ||
300 | davinci_cfg_reg(DM644X_AEAW0); | ||
301 | davinci_cfg_reg(DM644X_AEAW1); | ||
302 | davinci_cfg_reg(DM644X_AEAW2); | ||
303 | davinci_cfg_reg(DM644X_AEAW3); | ||
304 | davinci_cfg_reg(DM644X_AEAW4); | ||
305 | |||
306 | davinci_setup_mmc(0, &davinci_ntosd2_mmc_config); | ||
307 | } | ||
308 | |||
309 | static __init void davinci_ntosd2_irq_init(void) | ||
310 | { | ||
311 | davinci_irq_init(); | ||
312 | } | ||
313 | |||
314 | MACHINE_START(NEUROS_OSD2, "Neuros OSD2") | ||
315 | /* Maintainer: Neuros Technologies <neuros@groups.google.com> */ | ||
316 | .phys_io = IO_PHYS, | ||
317 | .io_pg_offst = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc, | ||
318 | .boot_params = (DAVINCI_DDR_BASE + 0x100), | ||
319 | .map_io = davinci_ntosd2_map_io, | ||
320 | .init_irq = davinci_ntosd2_irq_init, | ||
321 | .timer = &davinci_timer, | ||
322 | .init_machine = davinci_ntosd2_init, | ||
323 | MACHINE_END | ||
diff --git a/arch/arm/mach-davinci/board-sffsdr.c b/arch/arm/mach-davinci/board-sffsdr.c index 7acdfd8ac071..08d373bfcc8a 100644 --- a/arch/arm/mach-davinci/board-sffsdr.c +++ b/arch/arm/mach-davinci/board-sffsdr.c | |||
@@ -23,35 +23,24 @@ | |||
23 | * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. | 23 | * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
24 | */ | 24 | */ |
25 | 25 | ||
26 | #include <linux/kernel.h> | ||
27 | #include <linux/module.h> | ||
28 | #include <linux/init.h> | 26 | #include <linux/init.h> |
29 | #include <linux/dma-mapping.h> | ||
30 | #include <linux/platform_device.h> | 27 | #include <linux/platform_device.h> |
31 | #include <linux/gpio.h> | ||
32 | |||
33 | #include <linux/i2c.h> | 28 | #include <linux/i2c.h> |
34 | #include <linux/i2c/at24.h> | 29 | #include <linux/i2c/at24.h> |
35 | #include <linux/etherdevice.h> | ||
36 | #include <linux/mtd/mtd.h> | 30 | #include <linux/mtd/mtd.h> |
37 | #include <linux/mtd/nand.h> | 31 | #include <linux/mtd/nand.h> |
38 | #include <linux/mtd/partitions.h> | 32 | #include <linux/mtd/partitions.h> |
39 | #include <linux/mtd/physmap.h> | ||
40 | #include <linux/io.h> | ||
41 | 33 | ||
42 | #include <asm/setup.h> | ||
43 | #include <asm/mach-types.h> | 34 | #include <asm/mach-types.h> |
44 | |||
45 | #include <asm/mach/arch.h> | 35 | #include <asm/mach/arch.h> |
46 | #include <asm/mach/map.h> | ||
47 | #include <asm/mach/flash.h> | 36 | #include <asm/mach/flash.h> |
48 | 37 | ||
49 | #include <mach/dm644x.h> | 38 | #include <mach/dm644x.h> |
50 | #include <mach/common.h> | 39 | #include <mach/common.h> |
51 | #include <mach/i2c.h> | 40 | #include <mach/i2c.h> |
52 | #include <mach/serial.h> | 41 | #include <mach/serial.h> |
53 | #include <mach/psc.h> | ||
54 | #include <mach/mux.h> | 42 | #include <mach/mux.h> |
43 | #include <mach/usb.h> | ||
55 | 44 | ||
56 | #define SFFSDR_PHY_MASK (0x2) | 45 | #define SFFSDR_PHY_MASK (0x2) |
57 | #define SFFSDR_MDIO_FREQUENCY (2200000) /* PHY bus frequency */ | 46 | #define SFFSDR_MDIO_FREQUENCY (2200000) /* PHY bus frequency */ |
@@ -107,11 +96,6 @@ static struct platform_device davinci_sffsdr_nandflash_device = { | |||
107 | .resource = davinci_sffsdr_nandflash_resource, | 96 | .resource = davinci_sffsdr_nandflash_resource, |
108 | }; | 97 | }; |
109 | 98 | ||
110 | static struct emac_platform_data sffsdr_emac_pdata = { | ||
111 | .phy_mask = SFFSDR_PHY_MASK, | ||
112 | .mdio_max_freq = SFFSDR_MDIO_FREQUENCY, | ||
113 | }; | ||
114 | |||
115 | static struct at24_platform_data eeprom_info = { | 99 | static struct at24_platform_data eeprom_info = { |
116 | .byte_len = (64*1024) / 8, | 100 | .byte_len = (64*1024) / 8, |
117 | .page_size = 32, | 101 | .page_size = 32, |
@@ -164,7 +148,7 @@ static __init void davinci_sffsdr_init(void) | |||
164 | davinci_serial_init(&uart_config); | 148 | davinci_serial_init(&uart_config); |
165 | soc_info->emac_pdata->phy_mask = SFFSDR_PHY_MASK; | 149 | soc_info->emac_pdata->phy_mask = SFFSDR_PHY_MASK; |
166 | soc_info->emac_pdata->mdio_max_freq = SFFSDR_MDIO_FREQUENCY; | 150 | soc_info->emac_pdata->mdio_max_freq = SFFSDR_MDIO_FREQUENCY; |
167 | setup_usb(0, 0); /* We support only peripheral mode. */ | 151 | davinci_setup_usb(0, 0); /* We support only peripheral mode. */ |
168 | 152 | ||
169 | /* mux VLYNQ pins */ | 153 | /* mux VLYNQ pins */ |
170 | davinci_cfg_reg(DM644X_VLYNQEN); | 154 | davinci_cfg_reg(DM644X_VLYNQEN); |
diff --git a/arch/arm/mach-davinci/clock.c b/arch/arm/mach-davinci/clock.c index 83d54d50b5ea..baece65cb9c0 100644 --- a/arch/arm/mach-davinci/clock.c +++ b/arch/arm/mach-davinci/clock.c | |||
@@ -17,8 +17,8 @@ | |||
17 | #include <linux/clk.h> | 17 | #include <linux/clk.h> |
18 | #include <linux/err.h> | 18 | #include <linux/err.h> |
19 | #include <linux/mutex.h> | 19 | #include <linux/mutex.h> |
20 | #include <linux/platform_device.h> | ||
21 | #include <linux/io.h> | 20 | #include <linux/io.h> |
21 | #include <linux/delay.h> | ||
22 | 22 | ||
23 | #include <mach/hardware.h> | 23 | #include <mach/hardware.h> |
24 | 24 | ||
@@ -42,8 +42,7 @@ static void __clk_enable(struct clk *clk) | |||
42 | if (clk->parent) | 42 | if (clk->parent) |
43 | __clk_enable(clk->parent); | 43 | __clk_enable(clk->parent); |
44 | if (clk->usecount++ == 0 && (clk->flags & CLK_PSC)) | 44 | if (clk->usecount++ == 0 && (clk->flags & CLK_PSC)) |
45 | davinci_psc_config(psc_domain(clk), clk->psc_ctlr, | 45 | davinci_psc_config(psc_domain(clk), clk->gpsc, clk->lpsc, 1); |
46 | clk->lpsc, 1); | ||
47 | } | 46 | } |
48 | 47 | ||
49 | static void __clk_disable(struct clk *clk) | 48 | static void __clk_disable(struct clk *clk) |
@@ -51,8 +50,7 @@ static void __clk_disable(struct clk *clk) | |||
51 | if (WARN_ON(clk->usecount == 0)) | 50 | if (WARN_ON(clk->usecount == 0)) |
52 | return; | 51 | return; |
53 | if (--clk->usecount == 0 && !(clk->flags & CLK_PLL)) | 52 | if (--clk->usecount == 0 && !(clk->flags & CLK_PLL)) |
54 | davinci_psc_config(psc_domain(clk), clk->psc_ctlr, | 53 | davinci_psc_config(psc_domain(clk), clk->gpsc, clk->lpsc, 0); |
55 | clk->lpsc, 0); | ||
56 | if (clk->parent) | 54 | if (clk->parent) |
57 | __clk_disable(clk->parent); | 55 | __clk_disable(clk->parent); |
58 | } | 56 | } |
@@ -99,20 +97,74 @@ long clk_round_rate(struct clk *clk, unsigned long rate) | |||
99 | if (clk == NULL || IS_ERR(clk)) | 97 | if (clk == NULL || IS_ERR(clk)) |
100 | return -EINVAL; | 98 | return -EINVAL; |
101 | 99 | ||
100 | if (clk->round_rate) | ||
101 | return clk->round_rate(clk, rate); | ||
102 | |||
102 | return clk->rate; | 103 | return clk->rate; |
103 | } | 104 | } |
104 | EXPORT_SYMBOL(clk_round_rate); | 105 | EXPORT_SYMBOL(clk_round_rate); |
105 | 106 | ||
107 | /* Propagate rate to children */ | ||
108 | static void propagate_rate(struct clk *root) | ||
109 | { | ||
110 | struct clk *clk; | ||
111 | |||
112 | list_for_each_entry(clk, &root->children, childnode) { | ||
113 | if (clk->recalc) | ||
114 | clk->rate = clk->recalc(clk); | ||
115 | propagate_rate(clk); | ||
116 | } | ||
117 | } | ||
118 | |||
106 | int clk_set_rate(struct clk *clk, unsigned long rate) | 119 | int clk_set_rate(struct clk *clk, unsigned long rate) |
107 | { | 120 | { |
121 | unsigned long flags; | ||
122 | int ret = -EINVAL; | ||
123 | |||
108 | if (clk == NULL || IS_ERR(clk)) | 124 | if (clk == NULL || IS_ERR(clk)) |
109 | return -EINVAL; | 125 | return ret; |
110 | 126 | ||
111 | /* changing the clk rate is not supported */ | 127 | spin_lock_irqsave(&clockfw_lock, flags); |
112 | return -EINVAL; | 128 | if (clk->set_rate) |
129 | ret = clk->set_rate(clk, rate); | ||
130 | if (ret == 0) { | ||
131 | if (clk->recalc) | ||
132 | clk->rate = clk->recalc(clk); | ||
133 | propagate_rate(clk); | ||
134 | } | ||
135 | spin_unlock_irqrestore(&clockfw_lock, flags); | ||
136 | |||
137 | return ret; | ||
113 | } | 138 | } |
114 | EXPORT_SYMBOL(clk_set_rate); | 139 | EXPORT_SYMBOL(clk_set_rate); |
115 | 140 | ||
141 | int clk_set_parent(struct clk *clk, struct clk *parent) | ||
142 | { | ||
143 | unsigned long flags; | ||
144 | |||
145 | if (clk == NULL || IS_ERR(clk)) | ||
146 | return -EINVAL; | ||
147 | |||
148 | /* Cannot change parent on enabled clock */ | ||
149 | if (WARN_ON(clk->usecount)) | ||
150 | return -EINVAL; | ||
151 | |||
152 | mutex_lock(&clocks_mutex); | ||
153 | clk->parent = parent; | ||
154 | list_del_init(&clk->childnode); | ||
155 | list_add(&clk->childnode, &clk->parent->children); | ||
156 | mutex_unlock(&clocks_mutex); | ||
157 | |||
158 | spin_lock_irqsave(&clockfw_lock, flags); | ||
159 | if (clk->recalc) | ||
160 | clk->rate = clk->recalc(clk); | ||
161 | propagate_rate(clk); | ||
162 | spin_unlock_irqrestore(&clockfw_lock, flags); | ||
163 | |||
164 | return 0; | ||
165 | } | ||
166 | EXPORT_SYMBOL(clk_set_parent); | ||
167 | |||
116 | int clk_register(struct clk *clk) | 168 | int clk_register(struct clk *clk) |
117 | { | 169 | { |
118 | if (clk == NULL || IS_ERR(clk)) | 170 | if (clk == NULL || IS_ERR(clk)) |
@@ -123,16 +175,24 @@ int clk_register(struct clk *clk) | |||
123 | clk->name, clk->parent->name)) | 175 | clk->name, clk->parent->name)) |
124 | return -EINVAL; | 176 | return -EINVAL; |
125 | 177 | ||
178 | INIT_LIST_HEAD(&clk->children); | ||
179 | |||
126 | mutex_lock(&clocks_mutex); | 180 | mutex_lock(&clocks_mutex); |
127 | list_add_tail(&clk->node, &clocks); | 181 | list_add_tail(&clk->node, &clocks); |
182 | if (clk->parent) | ||
183 | list_add_tail(&clk->childnode, &clk->parent->children); | ||
128 | mutex_unlock(&clocks_mutex); | 184 | mutex_unlock(&clocks_mutex); |
129 | 185 | ||
130 | /* If rate is already set, use it */ | 186 | /* If rate is already set, use it */ |
131 | if (clk->rate) | 187 | if (clk->rate) |
132 | return 0; | 188 | return 0; |
133 | 189 | ||
190 | /* Else, see if there is a way to calculate it */ | ||
191 | if (clk->recalc) | ||
192 | clk->rate = clk->recalc(clk); | ||
193 | |||
134 | /* Otherwise, default to parent rate */ | 194 | /* Otherwise, default to parent rate */ |
135 | if (clk->parent) | 195 | else if (clk->parent) |
136 | clk->rate = clk->parent->rate; | 196 | clk->rate = clk->parent->rate; |
137 | 197 | ||
138 | return 0; | 198 | return 0; |
@@ -146,6 +206,7 @@ void clk_unregister(struct clk *clk) | |||
146 | 206 | ||
147 | mutex_lock(&clocks_mutex); | 207 | mutex_lock(&clocks_mutex); |
148 | list_del(&clk->node); | 208 | list_del(&clk->node); |
209 | list_del(&clk->childnode); | ||
149 | mutex_unlock(&clocks_mutex); | 210 | mutex_unlock(&clocks_mutex); |
150 | } | 211 | } |
151 | EXPORT_SYMBOL(clk_unregister); | 212 | EXPORT_SYMBOL(clk_unregister); |
@@ -166,11 +227,11 @@ static int __init clk_disable_unused(void) | |||
166 | continue; | 227 | continue; |
167 | 228 | ||
168 | /* ignore if in Disabled or SwRstDisable states */ | 229 | /* ignore if in Disabled or SwRstDisable states */ |
169 | if (!davinci_psc_is_clk_active(ck->psc_ctlr, ck->lpsc)) | 230 | if (!davinci_psc_is_clk_active(ck->gpsc, ck->lpsc)) |
170 | continue; | 231 | continue; |
171 | 232 | ||
172 | pr_info("Clocks: disable unused %s\n", ck->name); | 233 | pr_info("Clocks: disable unused %s\n", ck->name); |
173 | davinci_psc_config(psc_domain(ck), ck->psc_ctlr, ck->lpsc, 0); | 234 | davinci_psc_config(psc_domain(ck), ck->gpsc, ck->lpsc, 0); |
174 | } | 235 | } |
175 | spin_unlock_irq(&clockfw_lock); | 236 | spin_unlock_irq(&clockfw_lock); |
176 | 237 | ||
@@ -179,50 +240,62 @@ static int __init clk_disable_unused(void) | |||
179 | late_initcall(clk_disable_unused); | 240 | late_initcall(clk_disable_unused); |
180 | #endif | 241 | #endif |
181 | 242 | ||
182 | static void clk_sysclk_recalc(struct clk *clk) | 243 | static unsigned long clk_sysclk_recalc(struct clk *clk) |
183 | { | 244 | { |
184 | u32 v, plldiv; | 245 | u32 v, plldiv; |
185 | struct pll_data *pll; | 246 | struct pll_data *pll; |
247 | unsigned long rate = clk->rate; | ||
186 | 248 | ||
187 | /* If this is the PLL base clock, no more calculations needed */ | 249 | /* If this is the PLL base clock, no more calculations needed */ |
188 | if (clk->pll_data) | 250 | if (clk->pll_data) |
189 | return; | 251 | return rate; |
190 | 252 | ||
191 | if (WARN_ON(!clk->parent)) | 253 | if (WARN_ON(!clk->parent)) |
192 | return; | 254 | return rate; |
193 | 255 | ||
194 | clk->rate = clk->parent->rate; | 256 | rate = clk->parent->rate; |
195 | 257 | ||
196 | /* Otherwise, the parent must be a PLL */ | 258 | /* Otherwise, the parent must be a PLL */ |
197 | if (WARN_ON(!clk->parent->pll_data)) | 259 | if (WARN_ON(!clk->parent->pll_data)) |
198 | return; | 260 | return rate; |
199 | 261 | ||
200 | pll = clk->parent->pll_data; | 262 | pll = clk->parent->pll_data; |
201 | 263 | ||
202 | /* If pre-PLL, source clock is before the multiplier and divider(s) */ | 264 | /* If pre-PLL, source clock is before the multiplier and divider(s) */ |
203 | if (clk->flags & PRE_PLL) | 265 | if (clk->flags & PRE_PLL) |
204 | clk->rate = pll->input_rate; | 266 | rate = pll->input_rate; |
205 | 267 | ||
206 | if (!clk->div_reg) | 268 | if (!clk->div_reg) |
207 | return; | 269 | return rate; |
208 | 270 | ||
209 | v = __raw_readl(pll->base + clk->div_reg); | 271 | v = __raw_readl(pll->base + clk->div_reg); |
210 | if (v & PLLDIV_EN) { | 272 | if (v & PLLDIV_EN) { |
211 | plldiv = (v & PLLDIV_RATIO_MASK) + 1; | 273 | plldiv = (v & PLLDIV_RATIO_MASK) + 1; |
212 | if (plldiv) | 274 | if (plldiv) |
213 | clk->rate /= plldiv; | 275 | rate /= plldiv; |
214 | } | 276 | } |
277 | |||
278 | return rate; | ||
279 | } | ||
280 | |||
281 | static unsigned long clk_leafclk_recalc(struct clk *clk) | ||
282 | { | ||
283 | if (WARN_ON(!clk->parent)) | ||
284 | return clk->rate; | ||
285 | |||
286 | return clk->parent->rate; | ||
215 | } | 287 | } |
216 | 288 | ||
217 | static void __init clk_pll_init(struct clk *clk) | 289 | static unsigned long clk_pllclk_recalc(struct clk *clk) |
218 | { | 290 | { |
219 | u32 ctrl, mult = 1, prediv = 1, postdiv = 1; | 291 | u32 ctrl, mult = 1, prediv = 1, postdiv = 1; |
220 | u8 bypass; | 292 | u8 bypass; |
221 | struct pll_data *pll = clk->pll_data; | 293 | struct pll_data *pll = clk->pll_data; |
294 | unsigned long rate = clk->rate; | ||
222 | 295 | ||
223 | pll->base = IO_ADDRESS(pll->phys_base); | 296 | pll->base = IO_ADDRESS(pll->phys_base); |
224 | ctrl = __raw_readl(pll->base + PLLCTL); | 297 | ctrl = __raw_readl(pll->base + PLLCTL); |
225 | clk->rate = pll->input_rate = clk->parent->rate; | 298 | rate = pll->input_rate = clk->parent->rate; |
226 | 299 | ||
227 | if (ctrl & PLLCTL_PLLEN) { | 300 | if (ctrl & PLLCTL_PLLEN) { |
228 | bypass = 0; | 301 | bypass = 0; |
@@ -255,9 +328,9 @@ static void __init clk_pll_init(struct clk *clk) | |||
255 | } | 328 | } |
256 | 329 | ||
257 | if (!bypass) { | 330 | if (!bypass) { |
258 | clk->rate /= prediv; | 331 | rate /= prediv; |
259 | clk->rate *= mult; | 332 | rate *= mult; |
260 | clk->rate /= postdiv; | 333 | rate /= postdiv; |
261 | } | 334 | } |
262 | 335 | ||
263 | pr_debug("PLL%d: input = %lu MHz [ ", | 336 | pr_debug("PLL%d: input = %lu MHz [ ", |
@@ -270,8 +343,90 @@ static void __init clk_pll_init(struct clk *clk) | |||
270 | pr_debug("* %d ", mult); | 343 | pr_debug("* %d ", mult); |
271 | if (postdiv > 1) | 344 | if (postdiv > 1) |
272 | pr_debug("/ %d ", postdiv); | 345 | pr_debug("/ %d ", postdiv); |
273 | pr_debug("] --> %lu MHz output.\n", clk->rate / 1000000); | 346 | pr_debug("] --> %lu MHz output.\n", rate / 1000000); |
347 | |||
348 | return rate; | ||
349 | } | ||
350 | |||
351 | /** | ||
352 | * davinci_set_pllrate - set the output rate of a given PLL. | ||
353 | * | ||
354 | * Note: Currently tested to work with OMAP-L138 only. | ||
355 | * | ||
356 | * @pll: pll whose rate needs to be changed. | ||
357 | * @prediv: The pre divider value. Passing 0 disables the pre-divider. | ||
358 | * @pllm: The multiplier value. Passing 0 leads to multiply-by-one. | ||
359 | * @postdiv: The post divider value. Passing 0 disables the post-divider. | ||
360 | */ | ||
361 | int davinci_set_pllrate(struct pll_data *pll, unsigned int prediv, | ||
362 | unsigned int mult, unsigned int postdiv) | ||
363 | { | ||
364 | u32 ctrl; | ||
365 | unsigned int locktime; | ||
366 | |||
367 | if (pll->base == NULL) | ||
368 | return -EINVAL; | ||
369 | |||
370 | /* | ||
371 | * PLL lock time required per OMAP-L138 datasheet is | ||
372 | * (2000 * prediv)/sqrt(pllm) OSCIN cycles. We approximate sqrt(pllm) | ||
373 | * as 4 and OSCIN cycle as 25 MHz. | ||
374 | */ | ||
375 | if (prediv) { | ||
376 | locktime = ((2000 * prediv) / 100); | ||
377 | prediv = (prediv - 1) | PLLDIV_EN; | ||
378 | } else { | ||
379 | locktime = 20; | ||
380 | } | ||
381 | if (postdiv) | ||
382 | postdiv = (postdiv - 1) | PLLDIV_EN; | ||
383 | if (mult) | ||
384 | mult = mult - 1; | ||
385 | |||
386 | ctrl = __raw_readl(pll->base + PLLCTL); | ||
387 | |||
388 | /* Switch the PLL to bypass mode */ | ||
389 | ctrl &= ~(PLLCTL_PLLENSRC | PLLCTL_PLLEN); | ||
390 | __raw_writel(ctrl, pll->base + PLLCTL); | ||
391 | |||
392 | /* | ||
393 | * Wait for 4 OSCIN/CLKIN cycles to ensure that the PLLC has switched | ||
394 | * to bypass mode. Delay of 1us ensures we are good for all > 4MHz | ||
395 | * OSCIN/CLKIN inputs. Typically the input is ~25MHz. | ||
396 | */ | ||
397 | udelay(1); | ||
398 | |||
399 | /* Reset and enable PLL */ | ||
400 | ctrl &= ~(PLLCTL_PLLRST | PLLCTL_PLLDIS); | ||
401 | __raw_writel(ctrl, pll->base + PLLCTL); | ||
402 | |||
403 | if (pll->flags & PLL_HAS_PREDIV) | ||
404 | __raw_writel(prediv, pll->base + PREDIV); | ||
405 | |||
406 | __raw_writel(mult, pll->base + PLLM); | ||
407 | |||
408 | if (pll->flags & PLL_HAS_POSTDIV) | ||
409 | __raw_writel(postdiv, pll->base + POSTDIV); | ||
410 | |||
411 | /* | ||
412 | * Wait for PLL to reset properly, OMAP-L138 datasheet says | ||
413 | * 'min' time = 125ns | ||
414 | */ | ||
415 | udelay(1); | ||
416 | |||
417 | /* Bring PLL out of reset */ | ||
418 | ctrl |= PLLCTL_PLLRST; | ||
419 | __raw_writel(ctrl, pll->base + PLLCTL); | ||
420 | |||
421 | udelay(locktime); | ||
422 | |||
423 | /* Remove PLL from bypass mode */ | ||
424 | ctrl |= PLLCTL_PLLEN; | ||
425 | __raw_writel(ctrl, pll->base + PLLCTL); | ||
426 | |||
427 | return 0; | ||
274 | } | 428 | } |
429 | EXPORT_SYMBOL(davinci_set_pllrate); | ||
275 | 430 | ||
276 | int __init davinci_clk_init(struct davinci_clk *clocks) | 431 | int __init davinci_clk_init(struct davinci_clk *clocks) |
277 | { | 432 | { |
@@ -281,12 +436,23 @@ int __init davinci_clk_init(struct davinci_clk *clocks) | |||
281 | for (c = clocks; c->lk.clk; c++) { | 436 | for (c = clocks; c->lk.clk; c++) { |
282 | clk = c->lk.clk; | 437 | clk = c->lk.clk; |
283 | 438 | ||
284 | if (clk->pll_data) | 439 | if (!clk->recalc) { |
285 | clk_pll_init(clk); | 440 | |
441 | /* Check if clock is a PLL */ | ||
442 | if (clk->pll_data) | ||
443 | clk->recalc = clk_pllclk_recalc; | ||
444 | |||
445 | /* Else, if it is a PLL-derived clock */ | ||
446 | else if (clk->flags & CLK_PLL) | ||
447 | clk->recalc = clk_sysclk_recalc; | ||
448 | |||
449 | /* Otherwise, it is a leaf clock (PSC clock) */ | ||
450 | else if (clk->parent) | ||
451 | clk->recalc = clk_leafclk_recalc; | ||
452 | } | ||
286 | 453 | ||
287 | /* Calculate rates for PLL-derived clocks */ | 454 | if (clk->recalc) |
288 | else if (clk->flags & CLK_PLL) | 455 | clk->rate = clk->recalc(clk); |
289 | clk_sysclk_recalc(clk); | ||
290 | 456 | ||
291 | if (clk->lpsc) | 457 | if (clk->lpsc) |
292 | clk->flags |= CLK_PSC; | 458 | clk->flags |= CLK_PSC; |
@@ -352,9 +518,8 @@ dump_clock(struct seq_file *s, unsigned nest, struct clk *parent) | |||
352 | /* REVISIT show device associations too */ | 518 | /* REVISIT show device associations too */ |
353 | 519 | ||
354 | /* cost is now small, but not linear... */ | 520 | /* cost is now small, but not linear... */ |
355 | list_for_each_entry(clk, &clocks, node) { | 521 | list_for_each_entry(clk, &parent->children, childnode) { |
356 | if (clk->parent == parent) | 522 | dump_clock(s, nest + NEST_DELTA, clk); |
357 | dump_clock(s, nest + NEST_DELTA, clk); | ||
358 | } | 523 | } |
359 | } | 524 | } |
360 | 525 | ||
diff --git a/arch/arm/mach-davinci/clock.h b/arch/arm/mach-davinci/clock.h index 27233cb4a2fb..c92d77a3008d 100644 --- a/arch/arm/mach-davinci/clock.h +++ b/arch/arm/mach-davinci/clock.h | |||
@@ -22,6 +22,10 @@ | |||
22 | /* PLL/Reset register offsets */ | 22 | /* PLL/Reset register offsets */ |
23 | #define PLLCTL 0x100 | 23 | #define PLLCTL 0x100 |
24 | #define PLLCTL_PLLEN BIT(0) | 24 | #define PLLCTL_PLLEN BIT(0) |
25 | #define PLLCTL_PLLPWRDN BIT(1) | ||
26 | #define PLLCTL_PLLRST BIT(3) | ||
27 | #define PLLCTL_PLLDIS BIT(4) | ||
28 | #define PLLCTL_PLLENSRC BIT(5) | ||
25 | #define PLLCTL_CLKMODE BIT(8) | 29 | #define PLLCTL_CLKMODE BIT(8) |
26 | 30 | ||
27 | #define PLLM 0x110 | 31 | #define PLLM 0x110 |
@@ -65,15 +69,20 @@ struct clk { | |||
65 | const char *name; | 69 | const char *name; |
66 | unsigned long rate; | 70 | unsigned long rate; |
67 | u8 usecount; | 71 | u8 usecount; |
68 | u8 flags; | ||
69 | u8 lpsc; | 72 | u8 lpsc; |
70 | u8 psc_ctlr; | 73 | u8 gpsc; |
74 | u32 flags; | ||
71 | struct clk *parent; | 75 | struct clk *parent; |
76 | struct list_head children; /* list of children */ | ||
77 | struct list_head childnode; /* parent's child list node */ | ||
72 | struct pll_data *pll_data; | 78 | struct pll_data *pll_data; |
73 | u32 div_reg; | 79 | u32 div_reg; |
80 | unsigned long (*recalc) (struct clk *); | ||
81 | int (*set_rate) (struct clk *clk, unsigned long rate); | ||
82 | int (*round_rate) (struct clk *clk, unsigned long rate); | ||
74 | }; | 83 | }; |
75 | 84 | ||
76 | /* Clock flags */ | 85 | /* Clock flags: SoC-specific flags start at BIT(16) */ |
77 | #define ALWAYS_ENABLED BIT(1) | 86 | #define ALWAYS_ENABLED BIT(1) |
78 | #define CLK_PSC BIT(2) | 87 | #define CLK_PSC BIT(2) |
79 | #define PSC_DSP BIT(3) /* PSC uses DSP domain, not ARM */ | 88 | #define PSC_DSP BIT(3) /* PSC uses DSP domain, not ARM */ |
@@ -94,6 +103,8 @@ struct davinci_clk { | |||
94 | } | 103 | } |
95 | 104 | ||
96 | int davinci_clk_init(struct davinci_clk *clocks); | 105 | int davinci_clk_init(struct davinci_clk *clocks); |
106 | int davinci_set_pllrate(struct pll_data *pll, unsigned int prediv, | ||
107 | unsigned int mult, unsigned int postdiv); | ||
97 | 108 | ||
98 | extern struct platform_device davinci_wdt_device; | 109 | extern struct platform_device davinci_wdt_device; |
99 | 110 | ||
diff --git a/arch/arm/mach-davinci/common.c b/arch/arm/mach-davinci/common.c index 61ede19c6b54..c2de94cde56a 100644 --- a/arch/arm/mach-davinci/common.c +++ b/arch/arm/mach-davinci/common.c | |||
@@ -86,6 +86,8 @@ void __init davinci_common_init(struct davinci_soc_info *soc_info) | |||
86 | dip = davinci_get_id(davinci_soc_info.jtag_id); | 86 | dip = davinci_get_id(davinci_soc_info.jtag_id); |
87 | if (!dip) { | 87 | if (!dip) { |
88 | ret = -EINVAL; | 88 | ret = -EINVAL; |
89 | pr_err("Unknown DaVinci JTAG ID 0x%x\n", | ||
90 | davinci_soc_info.jtag_id); | ||
89 | goto err; | 91 | goto err; |
90 | } | 92 | } |
91 | 93 | ||
@@ -104,5 +106,5 @@ void __init davinci_common_init(struct davinci_soc_info *soc_info) | |||
104 | return; | 106 | return; |
105 | 107 | ||
106 | err: | 108 | err: |
107 | pr_err("davinci_common_init: SoC Initialization failed\n"); | 109 | panic("davinci_common_init: SoC Initialization failed\n"); |
108 | } | 110 | } |
diff --git a/arch/arm/mach-davinci/cp_intc.c b/arch/arm/mach-davinci/cp_intc.c index 96c8e97a7deb..52b287cf3a42 100644 --- a/arch/arm/mach-davinci/cp_intc.c +++ b/arch/arm/mach-davinci/cp_intc.c | |||
@@ -10,9 +10,6 @@ | |||
10 | */ | 10 | */ |
11 | 11 | ||
12 | #include <linux/init.h> | 12 | #include <linux/init.h> |
13 | #include <linux/sched.h> | ||
14 | #include <linux/interrupt.h> | ||
15 | #include <linux/kernel.h> | ||
16 | #include <linux/irq.h> | 13 | #include <linux/irq.h> |
17 | #include <linux/io.h> | 14 | #include <linux/io.h> |
18 | 15 | ||
diff --git a/arch/arm/mach-davinci/cpufreq.c b/arch/arm/mach-davinci/cpufreq.c new file mode 100644 index 000000000000..d3fa6de1e20f --- /dev/null +++ b/arch/arm/mach-davinci/cpufreq.c | |||
@@ -0,0 +1,226 @@ | |||
1 | /* | ||
2 | * CPU frequency scaling for DaVinci | ||
3 | * | ||
4 | * Copyright (C) 2009 Texas Instruments Incorporated - http://www.ti.com/ | ||
5 | * | ||
6 | * Based on linux/arch/arm/plat-omap/cpu-omap.c. Original Copyright follows: | ||
7 | * | ||
8 | * Copyright (C) 2005 Nokia Corporation | ||
9 | * Written by Tony Lindgren <tony@atomide.com> | ||
10 | * | ||
11 | * Based on cpu-sa1110.c, Copyright (C) 2001 Russell King | ||
12 | * | ||
13 | * Copyright (C) 2007-2008 Texas Instruments, Inc. | ||
14 | * Updated to support OMAP3 | ||
15 | * Rajendra Nayak <rnayak@ti.com> | ||
16 | * | ||
17 | * This program is free software; you can redistribute it and/or modify | ||
18 | * it under the terms of the GNU General Public License version 2 as | ||
19 | * published by the Free Software Foundation. | ||
20 | */ | ||
21 | #include <linux/types.h> | ||
22 | #include <linux/cpufreq.h> | ||
23 | #include <linux/init.h> | ||
24 | #include <linux/err.h> | ||
25 | #include <linux/clk.h> | ||
26 | #include <linux/platform_device.h> | ||
27 | |||
28 | #include <mach/hardware.h> | ||
29 | #include <mach/cpufreq.h> | ||
30 | #include <mach/common.h> | ||
31 | |||
32 | #include "clock.h" | ||
33 | |||
34 | struct davinci_cpufreq { | ||
35 | struct device *dev; | ||
36 | struct clk *armclk; | ||
37 | }; | ||
38 | static struct davinci_cpufreq cpufreq; | ||
39 | |||
40 | static int davinci_verify_speed(struct cpufreq_policy *policy) | ||
41 | { | ||
42 | struct davinci_cpufreq_config *pdata = cpufreq.dev->platform_data; | ||
43 | struct cpufreq_frequency_table *freq_table = pdata->freq_table; | ||
44 | struct clk *armclk = cpufreq.armclk; | ||
45 | |||
46 | if (freq_table) | ||
47 | return cpufreq_frequency_table_verify(policy, freq_table); | ||
48 | |||
49 | if (policy->cpu) | ||
50 | return -EINVAL; | ||
51 | |||
52 | cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq, | ||
53 | policy->cpuinfo.max_freq); | ||
54 | |||
55 | policy->min = clk_round_rate(armclk, policy->min * 1000) / 1000; | ||
56 | policy->max = clk_round_rate(armclk, policy->max * 1000) / 1000; | ||
57 | cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq, | ||
58 | policy->cpuinfo.max_freq); | ||
59 | return 0; | ||
60 | } | ||
61 | |||
62 | static unsigned int davinci_getspeed(unsigned int cpu) | ||
63 | { | ||
64 | if (cpu) | ||
65 | return 0; | ||
66 | |||
67 | return clk_get_rate(cpufreq.armclk) / 1000; | ||
68 | } | ||
69 | |||
70 | static int davinci_target(struct cpufreq_policy *policy, | ||
71 | unsigned int target_freq, unsigned int relation) | ||
72 | { | ||
73 | int ret = 0; | ||
74 | unsigned int idx; | ||
75 | struct cpufreq_freqs freqs; | ||
76 | struct davinci_cpufreq_config *pdata = cpufreq.dev->platform_data; | ||
77 | struct clk *armclk = cpufreq.armclk; | ||
78 | |||
79 | /* | ||
80 | * Ensure desired rate is within allowed range. Some govenors | ||
81 | * (ondemand) will just pass target_freq=0 to get the minimum. | ||
82 | */ | ||
83 | if (target_freq < policy->cpuinfo.min_freq) | ||
84 | target_freq = policy->cpuinfo.min_freq; | ||
85 | if (target_freq > policy->cpuinfo.max_freq) | ||
86 | target_freq = policy->cpuinfo.max_freq; | ||
87 | |||
88 | freqs.old = davinci_getspeed(0); | ||
89 | freqs.new = clk_round_rate(armclk, target_freq * 1000) / 1000; | ||
90 | freqs.cpu = 0; | ||
91 | |||
92 | if (freqs.old == freqs.new) | ||
93 | return ret; | ||
94 | |||
95 | cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, | ||
96 | dev_driver_string(cpufreq.dev), | ||
97 | "transition: %u --> %u\n", freqs.old, freqs.new); | ||
98 | |||
99 | ret = cpufreq_frequency_table_target(policy, pdata->freq_table, | ||
100 | freqs.new, relation, &idx); | ||
101 | if (ret) | ||
102 | return -EINVAL; | ||
103 | |||
104 | cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); | ||
105 | |||
106 | /* if moving to higher frequency, up the voltage beforehand */ | ||
107 | if (pdata->set_voltage && freqs.new > freqs.old) | ||
108 | pdata->set_voltage(idx); | ||
109 | |||
110 | ret = clk_set_rate(armclk, idx); | ||
111 | |||
112 | /* if moving to lower freq, lower the voltage after lowering freq */ | ||
113 | if (pdata->set_voltage && freqs.new < freqs.old) | ||
114 | pdata->set_voltage(idx); | ||
115 | |||
116 | cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); | ||
117 | |||
118 | return ret; | ||
119 | } | ||
120 | |||
121 | static int __init davinci_cpu_init(struct cpufreq_policy *policy) | ||
122 | { | ||
123 | int result = 0; | ||
124 | struct davinci_cpufreq_config *pdata = cpufreq.dev->platform_data; | ||
125 | struct cpufreq_frequency_table *freq_table = pdata->freq_table; | ||
126 | |||
127 | if (policy->cpu != 0) | ||
128 | return -EINVAL; | ||
129 | |||
130 | /* Finish platform specific initialization */ | ||
131 | if (pdata->init) { | ||
132 | result = pdata->init(); | ||
133 | if (result) | ||
134 | return result; | ||
135 | } | ||
136 | |||
137 | policy->cur = policy->min = policy->max = davinci_getspeed(0); | ||
138 | |||
139 | if (freq_table) { | ||
140 | result = cpufreq_frequency_table_cpuinfo(policy, freq_table); | ||
141 | if (!result) | ||
142 | cpufreq_frequency_table_get_attr(freq_table, | ||
143 | policy->cpu); | ||
144 | } else { | ||
145 | policy->cpuinfo.min_freq = policy->min; | ||
146 | policy->cpuinfo.max_freq = policy->max; | ||
147 | } | ||
148 | |||
149 | policy->min = policy->cpuinfo.min_freq; | ||
150 | policy->max = policy->cpuinfo.max_freq; | ||
151 | policy->cur = davinci_getspeed(0); | ||
152 | |||
153 | /* | ||
154 | * Time measurement across the target() function yields ~1500-1800us | ||
155 | * time taken with no drivers on notification list. | ||
156 | * Setting the latency to 2000 us to accomodate addition of drivers | ||
157 | * to pre/post change notification list. | ||
158 | */ | ||
159 | policy->cpuinfo.transition_latency = 2000 * 1000; | ||
160 | return 0; | ||
161 | } | ||
162 | |||
163 | static int davinci_cpu_exit(struct cpufreq_policy *policy) | ||
164 | { | ||
165 | cpufreq_frequency_table_put_attr(policy->cpu); | ||
166 | return 0; | ||
167 | } | ||
168 | |||
169 | static struct freq_attr *davinci_cpufreq_attr[] = { | ||
170 | &cpufreq_freq_attr_scaling_available_freqs, | ||
171 | NULL, | ||
172 | }; | ||
173 | |||
174 | static struct cpufreq_driver davinci_driver = { | ||
175 | .flags = CPUFREQ_STICKY, | ||
176 | .verify = davinci_verify_speed, | ||
177 | .target = davinci_target, | ||
178 | .get = davinci_getspeed, | ||
179 | .init = davinci_cpu_init, | ||
180 | .exit = davinci_cpu_exit, | ||
181 | .name = "davinci", | ||
182 | .attr = davinci_cpufreq_attr, | ||
183 | }; | ||
184 | |||
185 | static int __init davinci_cpufreq_probe(struct platform_device *pdev) | ||
186 | { | ||
187 | struct davinci_cpufreq_config *pdata = pdev->dev.platform_data; | ||
188 | |||
189 | if (!pdata) | ||
190 | return -EINVAL; | ||
191 | if (!pdata->freq_table) | ||
192 | return -EINVAL; | ||
193 | |||
194 | cpufreq.dev = &pdev->dev; | ||
195 | |||
196 | cpufreq.armclk = clk_get(NULL, "arm"); | ||
197 | if (IS_ERR(cpufreq.armclk)) { | ||
198 | dev_err(cpufreq.dev, "Unable to get ARM clock\n"); | ||
199 | return PTR_ERR(cpufreq.armclk); | ||
200 | } | ||
201 | |||
202 | return cpufreq_register_driver(&davinci_driver); | ||
203 | } | ||
204 | |||
205 | static int __exit davinci_cpufreq_remove(struct platform_device *pdev) | ||
206 | { | ||
207 | clk_put(cpufreq.armclk); | ||
208 | |||
209 | return cpufreq_unregister_driver(&davinci_driver); | ||
210 | } | ||
211 | |||
212 | static struct platform_driver davinci_cpufreq_driver = { | ||
213 | .driver = { | ||
214 | .name = "cpufreq-davinci", | ||
215 | .owner = THIS_MODULE, | ||
216 | }, | ||
217 | .remove = __exit_p(davinci_cpufreq_remove), | ||
218 | }; | ||
219 | |||
220 | static int __init davinci_cpufreq_init(void) | ||
221 | { | ||
222 | return platform_driver_probe(&davinci_cpufreq_driver, | ||
223 | davinci_cpufreq_probe); | ||
224 | } | ||
225 | late_initcall(davinci_cpufreq_init); | ||
226 | |||
diff --git a/arch/arm/mach-davinci/cpuidle.c b/arch/arm/mach-davinci/cpuidle.c new file mode 100644 index 000000000000..97a90f36fc92 --- /dev/null +++ b/arch/arm/mach-davinci/cpuidle.c | |||
@@ -0,0 +1,197 @@ | |||
1 | /* | ||
2 | * CPU idle for DaVinci SoCs | ||
3 | * | ||
4 | * Copyright (C) 2009 Texas Instruments Incorporated. http://www.ti.com/ | ||
5 | * | ||
6 | * Derived from Marvell Kirkwood CPU idle code | ||
7 | * (arch/arm/mach-kirkwood/cpuidle.c) | ||
8 | * | ||
9 | * This program is free software; you can redistribute it and/or modify | ||
10 | * it under the terms of the GNU General Public License version 2 as | ||
11 | * published by the Free Software Foundation. | ||
12 | */ | ||
13 | |||
14 | #include <linux/kernel.h> | ||
15 | #include <linux/init.h> | ||
16 | #include <linux/platform_device.h> | ||
17 | #include <linux/cpuidle.h> | ||
18 | #include <linux/io.h> | ||
19 | #include <asm/proc-fns.h> | ||
20 | |||
21 | #include <mach/cpuidle.h> | ||
22 | |||
23 | #define DAVINCI_CPUIDLE_MAX_STATES 2 | ||
24 | |||
25 | struct davinci_ops { | ||
26 | void (*enter) (u32 flags); | ||
27 | void (*exit) (u32 flags); | ||
28 | u32 flags; | ||
29 | }; | ||
30 | |||
31 | /* fields in davinci_ops.flags */ | ||
32 | #define DAVINCI_CPUIDLE_FLAGS_DDR2_PWDN BIT(0) | ||
33 | |||
34 | static struct cpuidle_driver davinci_idle_driver = { | ||
35 | .name = "cpuidle-davinci", | ||
36 | .owner = THIS_MODULE, | ||
37 | }; | ||
38 | |||
39 | static DEFINE_PER_CPU(struct cpuidle_device, davinci_cpuidle_device); | ||
40 | static void __iomem *ddr2_reg_base; | ||
41 | |||
42 | #define DDR2_SDRCR_OFFSET 0xc | ||
43 | #define DDR2_SRPD_BIT BIT(23) | ||
44 | #define DDR2_LPMODEN_BIT BIT(31) | ||
45 | |||
46 | static void davinci_save_ddr_power(int enter, bool pdown) | ||
47 | { | ||
48 | u32 val; | ||
49 | |||
50 | val = __raw_readl(ddr2_reg_base + DDR2_SDRCR_OFFSET); | ||
51 | |||
52 | if (enter) { | ||
53 | if (pdown) | ||
54 | val |= DDR2_SRPD_BIT; | ||
55 | else | ||
56 | val &= ~DDR2_SRPD_BIT; | ||
57 | val |= DDR2_LPMODEN_BIT; | ||
58 | } else { | ||
59 | val &= ~(DDR2_SRPD_BIT | DDR2_LPMODEN_BIT); | ||
60 | } | ||
61 | |||
62 | __raw_writel(val, ddr2_reg_base + DDR2_SDRCR_OFFSET); | ||
63 | } | ||
64 | |||
65 | static void davinci_c2state_enter(u32 flags) | ||
66 | { | ||
67 | davinci_save_ddr_power(1, !!(flags & DAVINCI_CPUIDLE_FLAGS_DDR2_PWDN)); | ||
68 | } | ||
69 | |||
70 | static void davinci_c2state_exit(u32 flags) | ||
71 | { | ||
72 | davinci_save_ddr_power(0, !!(flags & DAVINCI_CPUIDLE_FLAGS_DDR2_PWDN)); | ||
73 | } | ||
74 | |||
75 | static struct davinci_ops davinci_states[DAVINCI_CPUIDLE_MAX_STATES] = { | ||
76 | [1] = { | ||
77 | .enter = davinci_c2state_enter, | ||
78 | .exit = davinci_c2state_exit, | ||
79 | }, | ||
80 | }; | ||
81 | |||
82 | /* Actual code that puts the SoC in different idle states */ | ||
83 | static int davinci_enter_idle(struct cpuidle_device *dev, | ||
84 | struct cpuidle_state *state) | ||
85 | { | ||
86 | struct davinci_ops *ops = cpuidle_get_statedata(state); | ||
87 | struct timeval before, after; | ||
88 | int idle_time; | ||
89 | |||
90 | local_irq_disable(); | ||
91 | do_gettimeofday(&before); | ||
92 | |||
93 | if (ops && ops->enter) | ||
94 | ops->enter(ops->flags); | ||
95 | /* Wait for interrupt state */ | ||
96 | cpu_do_idle(); | ||
97 | if (ops && ops->exit) | ||
98 | ops->exit(ops->flags); | ||
99 | |||
100 | do_gettimeofday(&after); | ||
101 | local_irq_enable(); | ||
102 | idle_time = (after.tv_sec - before.tv_sec) * USEC_PER_SEC + | ||
103 | (after.tv_usec - before.tv_usec); | ||
104 | return idle_time; | ||
105 | } | ||
106 | |||
107 | static int __init davinci_cpuidle_probe(struct platform_device *pdev) | ||
108 | { | ||
109 | int ret; | ||
110 | struct cpuidle_device *device; | ||
111 | struct davinci_cpuidle_config *pdata = pdev->dev.platform_data; | ||
112 | struct resource *ddr2_regs; | ||
113 | resource_size_t len; | ||
114 | |||
115 | device = &per_cpu(davinci_cpuidle_device, smp_processor_id()); | ||
116 | |||
117 | if (!pdata) { | ||
118 | dev_err(&pdev->dev, "cannot get platform data\n"); | ||
119 | return -ENOENT; | ||
120 | } | ||
121 | |||
122 | ddr2_regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); | ||
123 | if (!ddr2_regs) { | ||
124 | dev_err(&pdev->dev, "cannot get DDR2 controller register base"); | ||
125 | return -ENODEV; | ||
126 | } | ||
127 | |||
128 | len = resource_size(ddr2_regs); | ||
129 | |||
130 | ddr2_regs = request_mem_region(ddr2_regs->start, len, ddr2_regs->name); | ||
131 | if (!ddr2_regs) | ||
132 | return -EBUSY; | ||
133 | |||
134 | ddr2_reg_base = ioremap(ddr2_regs->start, len); | ||
135 | if (!ddr2_reg_base) { | ||
136 | ret = -ENOMEM; | ||
137 | goto ioremap_fail; | ||
138 | } | ||
139 | |||
140 | ret = cpuidle_register_driver(&davinci_idle_driver); | ||
141 | if (ret) { | ||
142 | dev_err(&pdev->dev, "failed to register driver\n"); | ||
143 | goto driver_register_fail; | ||
144 | } | ||
145 | |||
146 | /* Wait for interrupt state */ | ||
147 | device->states[0].enter = davinci_enter_idle; | ||
148 | device->states[0].exit_latency = 1; | ||
149 | device->states[0].target_residency = 10000; | ||
150 | device->states[0].flags = CPUIDLE_FLAG_TIME_VALID; | ||
151 | strcpy(device->states[0].name, "WFI"); | ||
152 | strcpy(device->states[0].desc, "Wait for interrupt"); | ||
153 | |||
154 | /* Wait for interrupt and DDR self refresh state */ | ||
155 | device->states[1].enter = davinci_enter_idle; | ||
156 | device->states[1].exit_latency = 10; | ||
157 | device->states[1].target_residency = 10000; | ||
158 | device->states[1].flags = CPUIDLE_FLAG_TIME_VALID; | ||
159 | strcpy(device->states[1].name, "DDR SR"); | ||
160 | strcpy(device->states[1].desc, "WFI and DDR Self Refresh"); | ||
161 | if (pdata->ddr2_pdown) | ||
162 | davinci_states[1].flags |= DAVINCI_CPUIDLE_FLAGS_DDR2_PWDN; | ||
163 | cpuidle_set_statedata(&device->states[1], &davinci_states[1]); | ||
164 | |||
165 | device->state_count = DAVINCI_CPUIDLE_MAX_STATES; | ||
166 | |||
167 | ret = cpuidle_register_device(device); | ||
168 | if (ret) { | ||
169 | dev_err(&pdev->dev, "failed to register device\n"); | ||
170 | goto device_register_fail; | ||
171 | } | ||
172 | |||
173 | return 0; | ||
174 | |||
175 | device_register_fail: | ||
176 | cpuidle_unregister_driver(&davinci_idle_driver); | ||
177 | driver_register_fail: | ||
178 | iounmap(ddr2_reg_base); | ||
179 | ioremap_fail: | ||
180 | release_mem_region(ddr2_regs->start, len); | ||
181 | return ret; | ||
182 | } | ||
183 | |||
184 | static struct platform_driver davinci_cpuidle_driver = { | ||
185 | .driver = { | ||
186 | .name = "cpuidle-davinci", | ||
187 | .owner = THIS_MODULE, | ||
188 | }, | ||
189 | }; | ||
190 | |||
191 | static int __init davinci_cpuidle_init(void) | ||
192 | { | ||
193 | return platform_driver_probe(&davinci_cpuidle_driver, | ||
194 | davinci_cpuidle_probe); | ||
195 | } | ||
196 | device_initcall(davinci_cpuidle_init); | ||
197 | |||
diff --git a/arch/arm/mach-davinci/da830.c b/arch/arm/mach-davinci/da830.c index 19b2748357fc..b22b5cf04250 100644 --- a/arch/arm/mach-davinci/da830.c +++ b/arch/arm/mach-davinci/da830.c | |||
@@ -8,22 +8,17 @@ | |||
8 | * is licensed "as is" without any warranty of any kind, whether express | 8 | * is licensed "as is" without any warranty of any kind, whether express |
9 | * or implied. | 9 | * or implied. |
10 | */ | 10 | */ |
11 | #include <linux/kernel.h> | ||
12 | #include <linux/init.h> | 11 | #include <linux/init.h> |
13 | #include <linux/clk.h> | 12 | #include <linux/clk.h> |
14 | #include <linux/platform_device.h> | ||
15 | 13 | ||
16 | #include <asm/mach/map.h> | 14 | #include <asm/mach/map.h> |
17 | 15 | ||
18 | #include <mach/clock.h> | ||
19 | #include <mach/psc.h> | 16 | #include <mach/psc.h> |
20 | #include <mach/mux.h> | ||
21 | #include <mach/irqs.h> | 17 | #include <mach/irqs.h> |
22 | #include <mach/cputype.h> | 18 | #include <mach/cputype.h> |
23 | #include <mach/common.h> | 19 | #include <mach/common.h> |
24 | #include <mach/time.h> | 20 | #include <mach/time.h> |
25 | #include <mach/da8xx.h> | 21 | #include <mach/da8xx.h> |
26 | #include <mach/asp.h> | ||
27 | 22 | ||
28 | #include "clock.h" | 23 | #include "clock.h" |
29 | #include "mux.h" | 24 | #include "mux.h" |
@@ -193,14 +188,14 @@ static struct clk uart1_clk = { | |||
193 | .name = "uart1", | 188 | .name = "uart1", |
194 | .parent = &pll0_sysclk2, | 189 | .parent = &pll0_sysclk2, |
195 | .lpsc = DA8XX_LPSC1_UART1, | 190 | .lpsc = DA8XX_LPSC1_UART1, |
196 | .psc_ctlr = 1, | 191 | .gpsc = 1, |
197 | }; | 192 | }; |
198 | 193 | ||
199 | static struct clk uart2_clk = { | 194 | static struct clk uart2_clk = { |
200 | .name = "uart2", | 195 | .name = "uart2", |
201 | .parent = &pll0_sysclk2, | 196 | .parent = &pll0_sysclk2, |
202 | .lpsc = DA8XX_LPSC1_UART2, | 197 | .lpsc = DA8XX_LPSC1_UART2, |
203 | .psc_ctlr = 1, | 198 | .gpsc = 1, |
204 | }; | 199 | }; |
205 | 200 | ||
206 | static struct clk spi0_clk = { | 201 | static struct clk spi0_clk = { |
@@ -213,98 +208,98 @@ static struct clk spi1_clk = { | |||
213 | .name = "spi1", | 208 | .name = "spi1", |
214 | .parent = &pll0_sysclk2, | 209 | .parent = &pll0_sysclk2, |
215 | .lpsc = DA8XX_LPSC1_SPI1, | 210 | .lpsc = DA8XX_LPSC1_SPI1, |
216 | .psc_ctlr = 1, | 211 | .gpsc = 1, |
217 | }; | 212 | }; |
218 | 213 | ||
219 | static struct clk ecap0_clk = { | 214 | static struct clk ecap0_clk = { |
220 | .name = "ecap0", | 215 | .name = "ecap0", |
221 | .parent = &pll0_sysclk2, | 216 | .parent = &pll0_sysclk2, |
222 | .lpsc = DA8XX_LPSC1_ECAP, | 217 | .lpsc = DA8XX_LPSC1_ECAP, |
223 | .psc_ctlr = 1, | 218 | .gpsc = 1, |
224 | }; | 219 | }; |
225 | 220 | ||
226 | static struct clk ecap1_clk = { | 221 | static struct clk ecap1_clk = { |
227 | .name = "ecap1", | 222 | .name = "ecap1", |
228 | .parent = &pll0_sysclk2, | 223 | .parent = &pll0_sysclk2, |
229 | .lpsc = DA8XX_LPSC1_ECAP, | 224 | .lpsc = DA8XX_LPSC1_ECAP, |
230 | .psc_ctlr = 1, | 225 | .gpsc = 1, |
231 | }; | 226 | }; |
232 | 227 | ||
233 | static struct clk ecap2_clk = { | 228 | static struct clk ecap2_clk = { |
234 | .name = "ecap2", | 229 | .name = "ecap2", |
235 | .parent = &pll0_sysclk2, | 230 | .parent = &pll0_sysclk2, |
236 | .lpsc = DA8XX_LPSC1_ECAP, | 231 | .lpsc = DA8XX_LPSC1_ECAP, |
237 | .psc_ctlr = 1, | 232 | .gpsc = 1, |
238 | }; | 233 | }; |
239 | 234 | ||
240 | static struct clk pwm0_clk = { | 235 | static struct clk pwm0_clk = { |
241 | .name = "pwm0", | 236 | .name = "pwm0", |
242 | .parent = &pll0_sysclk2, | 237 | .parent = &pll0_sysclk2, |
243 | .lpsc = DA8XX_LPSC1_PWM, | 238 | .lpsc = DA8XX_LPSC1_PWM, |
244 | .psc_ctlr = 1, | 239 | .gpsc = 1, |
245 | }; | 240 | }; |
246 | 241 | ||
247 | static struct clk pwm1_clk = { | 242 | static struct clk pwm1_clk = { |
248 | .name = "pwm1", | 243 | .name = "pwm1", |
249 | .parent = &pll0_sysclk2, | 244 | .parent = &pll0_sysclk2, |
250 | .lpsc = DA8XX_LPSC1_PWM, | 245 | .lpsc = DA8XX_LPSC1_PWM, |
251 | .psc_ctlr = 1, | 246 | .gpsc = 1, |
252 | }; | 247 | }; |
253 | 248 | ||
254 | static struct clk pwm2_clk = { | 249 | static struct clk pwm2_clk = { |
255 | .name = "pwm2", | 250 | .name = "pwm2", |
256 | .parent = &pll0_sysclk2, | 251 | .parent = &pll0_sysclk2, |
257 | .lpsc = DA8XX_LPSC1_PWM, | 252 | .lpsc = DA8XX_LPSC1_PWM, |
258 | .psc_ctlr = 1, | 253 | .gpsc = 1, |
259 | }; | 254 | }; |
260 | 255 | ||
261 | static struct clk eqep0_clk = { | 256 | static struct clk eqep0_clk = { |
262 | .name = "eqep0", | 257 | .name = "eqep0", |
263 | .parent = &pll0_sysclk2, | 258 | .parent = &pll0_sysclk2, |
264 | .lpsc = DA830_LPSC1_EQEP, | 259 | .lpsc = DA830_LPSC1_EQEP, |
265 | .psc_ctlr = 1, | 260 | .gpsc = 1, |
266 | }; | 261 | }; |
267 | 262 | ||
268 | static struct clk eqep1_clk = { | 263 | static struct clk eqep1_clk = { |
269 | .name = "eqep1", | 264 | .name = "eqep1", |
270 | .parent = &pll0_sysclk2, | 265 | .parent = &pll0_sysclk2, |
271 | .lpsc = DA830_LPSC1_EQEP, | 266 | .lpsc = DA830_LPSC1_EQEP, |
272 | .psc_ctlr = 1, | 267 | .gpsc = 1, |
273 | }; | 268 | }; |
274 | 269 | ||
275 | static struct clk lcdc_clk = { | 270 | static struct clk lcdc_clk = { |
276 | .name = "lcdc", | 271 | .name = "lcdc", |
277 | .parent = &pll0_sysclk2, | 272 | .parent = &pll0_sysclk2, |
278 | .lpsc = DA8XX_LPSC1_LCDC, | 273 | .lpsc = DA8XX_LPSC1_LCDC, |
279 | .psc_ctlr = 1, | 274 | .gpsc = 1, |
280 | }; | 275 | }; |
281 | 276 | ||
282 | static struct clk mcasp0_clk = { | 277 | static struct clk mcasp0_clk = { |
283 | .name = "mcasp0", | 278 | .name = "mcasp0", |
284 | .parent = &pll0_sysclk2, | 279 | .parent = &pll0_sysclk2, |
285 | .lpsc = DA8XX_LPSC1_McASP0, | 280 | .lpsc = DA8XX_LPSC1_McASP0, |
286 | .psc_ctlr = 1, | 281 | .gpsc = 1, |
287 | }; | 282 | }; |
288 | 283 | ||
289 | static struct clk mcasp1_clk = { | 284 | static struct clk mcasp1_clk = { |
290 | .name = "mcasp1", | 285 | .name = "mcasp1", |
291 | .parent = &pll0_sysclk2, | 286 | .parent = &pll0_sysclk2, |
292 | .lpsc = DA830_LPSC1_McASP1, | 287 | .lpsc = DA830_LPSC1_McASP1, |
293 | .psc_ctlr = 1, | 288 | .gpsc = 1, |
294 | }; | 289 | }; |
295 | 290 | ||
296 | static struct clk mcasp2_clk = { | 291 | static struct clk mcasp2_clk = { |
297 | .name = "mcasp2", | 292 | .name = "mcasp2", |
298 | .parent = &pll0_sysclk2, | 293 | .parent = &pll0_sysclk2, |
299 | .lpsc = DA830_LPSC1_McASP2, | 294 | .lpsc = DA830_LPSC1_McASP2, |
300 | .psc_ctlr = 1, | 295 | .gpsc = 1, |
301 | }; | 296 | }; |
302 | 297 | ||
303 | static struct clk usb20_clk = { | 298 | static struct clk usb20_clk = { |
304 | .name = "usb20", | 299 | .name = "usb20", |
305 | .parent = &pll0_sysclk2, | 300 | .parent = &pll0_sysclk2, |
306 | .lpsc = DA8XX_LPSC1_USB20, | 301 | .lpsc = DA8XX_LPSC1_USB20, |
307 | .psc_ctlr = 1, | 302 | .gpsc = 1, |
308 | }; | 303 | }; |
309 | 304 | ||
310 | static struct clk aemif_clk = { | 305 | static struct clk aemif_clk = { |
@@ -332,36 +327,36 @@ static struct clk emac_clk = { | |||
332 | .name = "emac", | 327 | .name = "emac", |
333 | .parent = &pll0_sysclk4, | 328 | .parent = &pll0_sysclk4, |
334 | .lpsc = DA8XX_LPSC1_CPGMAC, | 329 | .lpsc = DA8XX_LPSC1_CPGMAC, |
335 | .psc_ctlr = 1, | 330 | .gpsc = 1, |
336 | }; | 331 | }; |
337 | 332 | ||
338 | static struct clk gpio_clk = { | 333 | static struct clk gpio_clk = { |
339 | .name = "gpio", | 334 | .name = "gpio", |
340 | .parent = &pll0_sysclk4, | 335 | .parent = &pll0_sysclk4, |
341 | .lpsc = DA8XX_LPSC1_GPIO, | 336 | .lpsc = DA8XX_LPSC1_GPIO, |
342 | .psc_ctlr = 1, | 337 | .gpsc = 1, |
343 | }; | 338 | }; |
344 | 339 | ||
345 | static struct clk i2c1_clk = { | 340 | static struct clk i2c1_clk = { |
346 | .name = "i2c1", | 341 | .name = "i2c1", |
347 | .parent = &pll0_sysclk4, | 342 | .parent = &pll0_sysclk4, |
348 | .lpsc = DA8XX_LPSC1_I2C, | 343 | .lpsc = DA8XX_LPSC1_I2C, |
349 | .psc_ctlr = 1, | 344 | .gpsc = 1, |
350 | }; | 345 | }; |
351 | 346 | ||
352 | static struct clk usb11_clk = { | 347 | static struct clk usb11_clk = { |
353 | .name = "usb11", | 348 | .name = "usb11", |
354 | .parent = &pll0_sysclk4, | 349 | .parent = &pll0_sysclk4, |
355 | .lpsc = DA8XX_LPSC1_USB11, | 350 | .lpsc = DA8XX_LPSC1_USB11, |
356 | .psc_ctlr = 1, | 351 | .gpsc = 1, |
357 | }; | 352 | }; |
358 | 353 | ||
359 | static struct clk emif3_clk = { | 354 | static struct clk emif3_clk = { |
360 | .name = "emif3", | 355 | .name = "emif3", |
361 | .parent = &pll0_sysclk5, | 356 | .parent = &pll0_sysclk5, |
362 | .lpsc = DA8XX_LPSC1_EMIF3C, | 357 | .lpsc = DA8XX_LPSC1_EMIF3C, |
358 | .gpsc = 1, | ||
363 | .flags = ALWAYS_ENABLED, | 359 | .flags = ALWAYS_ENABLED, |
364 | .psc_ctlr = 1, | ||
365 | }; | 360 | }; |
366 | 361 | ||
367 | static struct clk arm_clk = { | 362 | static struct clk arm_clk = { |
@@ -411,7 +406,7 @@ static struct davinci_clk da830_clks[] = { | |||
411 | CLK(NULL, "pwm2", &pwm2_clk), | 406 | CLK(NULL, "pwm2", &pwm2_clk), |
412 | CLK("eqep.0", NULL, &eqep0_clk), | 407 | CLK("eqep.0", NULL, &eqep0_clk), |
413 | CLK("eqep.1", NULL, &eqep1_clk), | 408 | CLK("eqep.1", NULL, &eqep1_clk), |
414 | CLK("da830_lcdc", NULL, &lcdc_clk), | 409 | CLK("da8xx_lcdc.0", NULL, &lcdc_clk), |
415 | CLK("davinci-mcasp.0", NULL, &mcasp0_clk), | 410 | CLK("davinci-mcasp.0", NULL, &mcasp0_clk), |
416 | CLK("davinci-mcasp.1", NULL, &mcasp1_clk), | 411 | CLK("davinci-mcasp.1", NULL, &mcasp1_clk), |
417 | CLK("davinci-mcasp.2", NULL, &mcasp2_clk), | 412 | CLK("davinci-mcasp.2", NULL, &mcasp2_clk), |
@@ -1143,7 +1138,21 @@ static struct davinci_id da830_ids[] = { | |||
1143 | .part_no = 0xb7df, | 1138 | .part_no = 0xb7df, |
1144 | .manufacturer = 0x017, /* 0x02f >> 1 */ | 1139 | .manufacturer = 0x017, /* 0x02f >> 1 */ |
1145 | .cpu_id = DAVINCI_CPU_ID_DA830, | 1140 | .cpu_id = DAVINCI_CPU_ID_DA830, |
1146 | .name = "da830/omap l137", | 1141 | .name = "da830/omap-l137 rev1.0", |
1142 | }, | ||
1143 | { | ||
1144 | .variant = 0x8, | ||
1145 | .part_no = 0xb7df, | ||
1146 | .manufacturer = 0x017, | ||
1147 | .cpu_id = DAVINCI_CPU_ID_DA830, | ||
1148 | .name = "da830/omap-l137 rev1.1", | ||
1149 | }, | ||
1150 | { | ||
1151 | .variant = 0x9, | ||
1152 | .part_no = 0xb7df, | ||
1153 | .manufacturer = 0x017, | ||
1154 | .cpu_id = DAVINCI_CPU_ID_DA830, | ||
1155 | .name = "da830/omap-l137 rev2.0", | ||
1147 | }, | 1156 | }, |
1148 | }; | 1157 | }; |
1149 | 1158 | ||
@@ -1178,13 +1187,11 @@ static struct davinci_timer_info da830_timer_info = { | |||
1178 | static struct davinci_soc_info davinci_soc_info_da830 = { | 1187 | static struct davinci_soc_info davinci_soc_info_da830 = { |
1179 | .io_desc = da830_io_desc, | 1188 | .io_desc = da830_io_desc, |
1180 | .io_desc_num = ARRAY_SIZE(da830_io_desc), | 1189 | .io_desc_num = ARRAY_SIZE(da830_io_desc), |
1181 | .jtag_id_base = IO_ADDRESS(DA8XX_JTAG_ID_REG), | ||
1182 | .ids = da830_ids, | 1190 | .ids = da830_ids, |
1183 | .ids_num = ARRAY_SIZE(da830_ids), | 1191 | .ids_num = ARRAY_SIZE(da830_ids), |
1184 | .cpu_clks = da830_clks, | 1192 | .cpu_clks = da830_clks, |
1185 | .psc_bases = da830_psc_bases, | 1193 | .psc_bases = da830_psc_bases, |
1186 | .psc_bases_num = ARRAY_SIZE(da830_psc_bases), | 1194 | .psc_bases_num = ARRAY_SIZE(da830_psc_bases), |
1187 | .pinmux_base = IO_ADDRESS(DA8XX_BOOT_CFG_BASE + 0x120), | ||
1188 | .pinmux_pins = da830_pins, | 1195 | .pinmux_pins = da830_pins, |
1189 | .pinmux_pins_num = ARRAY_SIZE(da830_pins), | 1196 | .pinmux_pins_num = ARRAY_SIZE(da830_pins), |
1190 | .intc_base = (void __iomem *)DA8XX_CP_INTC_VIRT, | 1197 | .intc_base = (void __iomem *)DA8XX_CP_INTC_VIRT, |
@@ -1201,5 +1208,13 @@ static struct davinci_soc_info davinci_soc_info_da830 = { | |||
1201 | 1208 | ||
1202 | void __init da830_init(void) | 1209 | void __init da830_init(void) |
1203 | { | 1210 | { |
1211 | da8xx_syscfg_base = ioremap(DA8XX_SYSCFG_BASE, SZ_4K); | ||
1212 | if (WARN(!da8xx_syscfg_base, "Unable to map syscfg module")) | ||
1213 | return; | ||
1214 | |||
1215 | davinci_soc_info_da830.jtag_id_base = | ||
1216 | DA8XX_SYSCFG_VIRT(DA8XX_JTAG_ID_REG); | ||
1217 | davinci_soc_info_da830.pinmux_base = DA8XX_SYSCFG_VIRT(0x120); | ||
1218 | |||
1204 | davinci_common_init(&davinci_soc_info_da830); | 1219 | davinci_common_init(&davinci_soc_info_da830); |
1205 | } | 1220 | } |
diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c index 192d719a47df..717806c6cef9 100644 --- a/arch/arm/mach-davinci/da850.c +++ b/arch/arm/mach-davinci/da850.c | |||
@@ -11,31 +11,41 @@ | |||
11 | * is licensed "as is" without any warranty of any kind, whether express | 11 | * is licensed "as is" without any warranty of any kind, whether express |
12 | * or implied. | 12 | * or implied. |
13 | */ | 13 | */ |
14 | #include <linux/kernel.h> | ||
15 | #include <linux/init.h> | 14 | #include <linux/init.h> |
16 | #include <linux/clk.h> | 15 | #include <linux/clk.h> |
17 | #include <linux/platform_device.h> | 16 | #include <linux/platform_device.h> |
17 | #include <linux/cpufreq.h> | ||
18 | #include <linux/regulator/consumer.h> | ||
18 | 19 | ||
19 | #include <asm/mach/map.h> | 20 | #include <asm/mach/map.h> |
20 | 21 | ||
21 | #include <mach/clock.h> | ||
22 | #include <mach/psc.h> | 22 | #include <mach/psc.h> |
23 | #include <mach/mux.h> | ||
24 | #include <mach/irqs.h> | 23 | #include <mach/irqs.h> |
25 | #include <mach/cputype.h> | 24 | #include <mach/cputype.h> |
26 | #include <mach/common.h> | 25 | #include <mach/common.h> |
27 | #include <mach/time.h> | 26 | #include <mach/time.h> |
28 | #include <mach/da8xx.h> | 27 | #include <mach/da8xx.h> |
28 | #include <mach/cpufreq.h> | ||
29 | 29 | ||
30 | #include "clock.h" | 30 | #include "clock.h" |
31 | #include "mux.h" | 31 | #include "mux.h" |
32 | 32 | ||
33 | /* SoC specific clock flags */ | ||
34 | #define DA850_CLK_ASYNC3 BIT(16) | ||
35 | |||
33 | #define DA850_PLL1_BASE 0x01e1a000 | 36 | #define DA850_PLL1_BASE 0x01e1a000 |
34 | #define DA850_TIMER64P2_BASE 0x01f0c000 | 37 | #define DA850_TIMER64P2_BASE 0x01f0c000 |
35 | #define DA850_TIMER64P3_BASE 0x01f0d000 | 38 | #define DA850_TIMER64P3_BASE 0x01f0d000 |
36 | 39 | ||
37 | #define DA850_REF_FREQ 24000000 | 40 | #define DA850_REF_FREQ 24000000 |
38 | 41 | ||
42 | #define CFGCHIP3_ASYNC3_CLKSRC BIT(4) | ||
43 | #define CFGCHIP0_PLL_MASTER_LOCK BIT(4) | ||
44 | |||
45 | static int da850_set_armrate(struct clk *clk, unsigned long rate); | ||
46 | static int da850_round_armrate(struct clk *clk, unsigned long rate); | ||
47 | static int da850_set_pll0rate(struct clk *clk, unsigned long armrate); | ||
48 | |||
39 | static struct pll_data pll0_data = { | 49 | static struct pll_data pll0_data = { |
40 | .num = 1, | 50 | .num = 1, |
41 | .phys_base = DA8XX_PLL0_BASE, | 51 | .phys_base = DA8XX_PLL0_BASE, |
@@ -52,6 +62,7 @@ static struct clk pll0_clk = { | |||
52 | .parent = &ref_clk, | 62 | .parent = &ref_clk, |
53 | .pll_data = &pll0_data, | 63 | .pll_data = &pll0_data, |
54 | .flags = CLK_PLL, | 64 | .flags = CLK_PLL, |
65 | .set_rate = da850_set_pll0rate, | ||
55 | }; | 66 | }; |
56 | 67 | ||
57 | static struct clk pll0_aux_clk = { | 68 | static struct clk pll0_aux_clk = { |
@@ -210,16 +221,16 @@ static struct clk tpcc1_clk = { | |||
210 | .name = "tpcc1", | 221 | .name = "tpcc1", |
211 | .parent = &pll0_sysclk2, | 222 | .parent = &pll0_sysclk2, |
212 | .lpsc = DA850_LPSC1_TPCC1, | 223 | .lpsc = DA850_LPSC1_TPCC1, |
224 | .gpsc = 1, | ||
213 | .flags = CLK_PSC | ALWAYS_ENABLED, | 225 | .flags = CLK_PSC | ALWAYS_ENABLED, |
214 | .psc_ctlr = 1, | ||
215 | }; | 226 | }; |
216 | 227 | ||
217 | static struct clk tptc2_clk = { | 228 | static struct clk tptc2_clk = { |
218 | .name = "tptc2", | 229 | .name = "tptc2", |
219 | .parent = &pll0_sysclk2, | 230 | .parent = &pll0_sysclk2, |
220 | .lpsc = DA850_LPSC1_TPTC2, | 231 | .lpsc = DA850_LPSC1_TPTC2, |
232 | .gpsc = 1, | ||
221 | .flags = ALWAYS_ENABLED, | 233 | .flags = ALWAYS_ENABLED, |
222 | .psc_ctlr = 1, | ||
223 | }; | 234 | }; |
224 | 235 | ||
225 | static struct clk uart0_clk = { | 236 | static struct clk uart0_clk = { |
@@ -232,14 +243,16 @@ static struct clk uart1_clk = { | |||
232 | .name = "uart1", | 243 | .name = "uart1", |
233 | .parent = &pll0_sysclk2, | 244 | .parent = &pll0_sysclk2, |
234 | .lpsc = DA8XX_LPSC1_UART1, | 245 | .lpsc = DA8XX_LPSC1_UART1, |
235 | .psc_ctlr = 1, | 246 | .gpsc = 1, |
247 | .flags = DA850_CLK_ASYNC3, | ||
236 | }; | 248 | }; |
237 | 249 | ||
238 | static struct clk uart2_clk = { | 250 | static struct clk uart2_clk = { |
239 | .name = "uart2", | 251 | .name = "uart2", |
240 | .parent = &pll0_sysclk2, | 252 | .parent = &pll0_sysclk2, |
241 | .lpsc = DA8XX_LPSC1_UART2, | 253 | .lpsc = DA8XX_LPSC1_UART2, |
242 | .psc_ctlr = 1, | 254 | .gpsc = 1, |
255 | .flags = DA850_CLK_ASYNC3, | ||
243 | }; | 256 | }; |
244 | 257 | ||
245 | static struct clk aintc_clk = { | 258 | static struct clk aintc_clk = { |
@@ -253,22 +266,22 @@ static struct clk gpio_clk = { | |||
253 | .name = "gpio", | 266 | .name = "gpio", |
254 | .parent = &pll0_sysclk4, | 267 | .parent = &pll0_sysclk4, |
255 | .lpsc = DA8XX_LPSC1_GPIO, | 268 | .lpsc = DA8XX_LPSC1_GPIO, |
256 | .psc_ctlr = 1, | 269 | .gpsc = 1, |
257 | }; | 270 | }; |
258 | 271 | ||
259 | static struct clk i2c1_clk = { | 272 | static struct clk i2c1_clk = { |
260 | .name = "i2c1", | 273 | .name = "i2c1", |
261 | .parent = &pll0_sysclk4, | 274 | .parent = &pll0_sysclk4, |
262 | .lpsc = DA8XX_LPSC1_I2C, | 275 | .lpsc = DA8XX_LPSC1_I2C, |
263 | .psc_ctlr = 1, | 276 | .gpsc = 1, |
264 | }; | 277 | }; |
265 | 278 | ||
266 | static struct clk emif3_clk = { | 279 | static struct clk emif3_clk = { |
267 | .name = "emif3", | 280 | .name = "emif3", |
268 | .parent = &pll0_sysclk5, | 281 | .parent = &pll0_sysclk5, |
269 | .lpsc = DA8XX_LPSC1_EMIF3C, | 282 | .lpsc = DA8XX_LPSC1_EMIF3C, |
283 | .gpsc = 1, | ||
270 | .flags = ALWAYS_ENABLED, | 284 | .flags = ALWAYS_ENABLED, |
271 | .psc_ctlr = 1, | ||
272 | }; | 285 | }; |
273 | 286 | ||
274 | static struct clk arm_clk = { | 287 | static struct clk arm_clk = { |
@@ -276,6 +289,8 @@ static struct clk arm_clk = { | |||
276 | .parent = &pll0_sysclk6, | 289 | .parent = &pll0_sysclk6, |
277 | .lpsc = DA8XX_LPSC0_ARM, | 290 | .lpsc = DA8XX_LPSC0_ARM, |
278 | .flags = ALWAYS_ENABLED, | 291 | .flags = ALWAYS_ENABLED, |
292 | .set_rate = da850_set_armrate, | ||
293 | .round_rate = da850_round_armrate, | ||
279 | }; | 294 | }; |
280 | 295 | ||
281 | static struct clk rmii_clk = { | 296 | static struct clk rmii_clk = { |
@@ -287,21 +302,22 @@ static struct clk emac_clk = { | |||
287 | .name = "emac", | 302 | .name = "emac", |
288 | .parent = &pll0_sysclk4, | 303 | .parent = &pll0_sysclk4, |
289 | .lpsc = DA8XX_LPSC1_CPGMAC, | 304 | .lpsc = DA8XX_LPSC1_CPGMAC, |
290 | .psc_ctlr = 1, | 305 | .gpsc = 1, |
291 | }; | 306 | }; |
292 | 307 | ||
293 | static struct clk mcasp_clk = { | 308 | static struct clk mcasp_clk = { |
294 | .name = "mcasp", | 309 | .name = "mcasp", |
295 | .parent = &pll0_sysclk2, | 310 | .parent = &pll0_sysclk2, |
296 | .lpsc = DA8XX_LPSC1_McASP0, | 311 | .lpsc = DA8XX_LPSC1_McASP0, |
297 | .psc_ctlr = 1, | 312 | .gpsc = 1, |
313 | .flags = DA850_CLK_ASYNC3, | ||
298 | }; | 314 | }; |
299 | 315 | ||
300 | static struct clk lcdc_clk = { | 316 | static struct clk lcdc_clk = { |
301 | .name = "lcdc", | 317 | .name = "lcdc", |
302 | .parent = &pll0_sysclk2, | 318 | .parent = &pll0_sysclk2, |
303 | .lpsc = DA8XX_LPSC1_LCDC, | 319 | .lpsc = DA8XX_LPSC1_LCDC, |
304 | .psc_ctlr = 1, | 320 | .gpsc = 1, |
305 | }; | 321 | }; |
306 | 322 | ||
307 | static struct clk mmcsd_clk = { | 323 | static struct clk mmcsd_clk = { |
@@ -404,6 +420,14 @@ static const struct mux_config da850_pins[] = { | |||
404 | MUX_CFG(DA850, MII_RXD_0, 3, 28, 15, 8, false) | 420 | MUX_CFG(DA850, MII_RXD_0, 3, 28, 15, 8, false) |
405 | MUX_CFG(DA850, MDIO_CLK, 4, 0, 15, 8, false) | 421 | MUX_CFG(DA850, MDIO_CLK, 4, 0, 15, 8, false) |
406 | MUX_CFG(DA850, MDIO_D, 4, 4, 15, 8, false) | 422 | MUX_CFG(DA850, MDIO_D, 4, 4, 15, 8, false) |
423 | MUX_CFG(DA850, RMII_TXD_0, 14, 12, 15, 8, false) | ||
424 | MUX_CFG(DA850, RMII_TXD_1, 14, 8, 15, 8, false) | ||
425 | MUX_CFG(DA850, RMII_TXEN, 14, 16, 15, 8, false) | ||
426 | MUX_CFG(DA850, RMII_CRS_DV, 15, 4, 15, 8, false) | ||
427 | MUX_CFG(DA850, RMII_RXD_0, 14, 24, 15, 8, false) | ||
428 | MUX_CFG(DA850, RMII_RXD_1, 14, 20, 15, 8, false) | ||
429 | MUX_CFG(DA850, RMII_RXER, 14, 28, 15, 8, false) | ||
430 | MUX_CFG(DA850, RMII_MHZ_50_CLK, 15, 0, 15, 0, false) | ||
407 | /* McASP function */ | 431 | /* McASP function */ |
408 | MUX_CFG(DA850, ACLKR, 0, 0, 15, 1, false) | 432 | MUX_CFG(DA850, ACLKR, 0, 0, 15, 1, false) |
409 | MUX_CFG(DA850, ACLKX, 0, 4, 15, 1, false) | 433 | MUX_CFG(DA850, ACLKX, 0, 4, 15, 1, false) |
@@ -506,8 +530,9 @@ static const struct mux_config da850_pins[] = { | |||
506 | MUX_CFG(DA850, EMA_WAIT_1, 6, 24, 15, 1, false) | 530 | MUX_CFG(DA850, EMA_WAIT_1, 6, 24, 15, 1, false) |
507 | MUX_CFG(DA850, NEMA_CS_2, 7, 0, 15, 1, false) | 531 | MUX_CFG(DA850, NEMA_CS_2, 7, 0, 15, 1, false) |
508 | /* GPIO function */ | 532 | /* GPIO function */ |
533 | MUX_CFG(DA850, GPIO2_6, 6, 4, 15, 8, false) | ||
534 | MUX_CFG(DA850, GPIO2_8, 5, 28, 15, 8, false) | ||
509 | MUX_CFG(DA850, GPIO2_15, 5, 0, 15, 8, false) | 535 | MUX_CFG(DA850, GPIO2_15, 5, 0, 15, 8, false) |
510 | MUX_CFG(DA850, GPIO8_10, 18, 28, 15, 8, false) | ||
511 | MUX_CFG(DA850, GPIO4_0, 10, 28, 15, 8, false) | 536 | MUX_CFG(DA850, GPIO4_0, 10, 28, 15, 8, false) |
512 | MUX_CFG(DA850, GPIO4_1, 10, 24, 15, 8, false) | 537 | MUX_CFG(DA850, GPIO4_1, 10, 24, 15, 8, false) |
513 | #endif | 538 | #endif |
@@ -547,6 +572,14 @@ const short da850_cpgmac_pins[] __initdata = { | |||
547 | -1 | 572 | -1 |
548 | }; | 573 | }; |
549 | 574 | ||
575 | const short da850_rmii_pins[] __initdata = { | ||
576 | DA850_RMII_TXD_0, DA850_RMII_TXD_1, DA850_RMII_TXEN, | ||
577 | DA850_RMII_CRS_DV, DA850_RMII_RXD_0, DA850_RMII_RXD_1, | ||
578 | DA850_RMII_RXER, DA850_RMII_MHZ_50_CLK, DA850_MDIO_CLK, | ||
579 | DA850_MDIO_D, | ||
580 | -1 | ||
581 | }; | ||
582 | |||
550 | const short da850_mcasp_pins[] __initdata = { | 583 | const short da850_mcasp_pins[] __initdata = { |
551 | DA850_AHCLKX, DA850_ACLKX, DA850_AFSX, | 584 | DA850_AHCLKX, DA850_ACLKX, DA850_AFSX, |
552 | DA850_AHCLKR, DA850_ACLKR, DA850_AFSR, DA850_AMUTE, | 585 | DA850_AHCLKR, DA850_ACLKR, DA850_AFSR, DA850_AMUTE, |
@@ -555,12 +588,11 @@ const short da850_mcasp_pins[] __initdata = { | |||
555 | }; | 588 | }; |
556 | 589 | ||
557 | const short da850_lcdcntl_pins[] __initdata = { | 590 | const short da850_lcdcntl_pins[] __initdata = { |
558 | DA850_LCD_D_1, DA850_LCD_D_2, DA850_LCD_D_3, DA850_LCD_D_4, | 591 | DA850_LCD_D_0, DA850_LCD_D_1, DA850_LCD_D_2, DA850_LCD_D_3, |
559 | DA850_LCD_D_5, DA850_LCD_D_6, DA850_LCD_D_7, DA850_LCD_D_8, | 592 | DA850_LCD_D_4, DA850_LCD_D_5, DA850_LCD_D_6, DA850_LCD_D_7, |
560 | DA850_LCD_D_9, DA850_LCD_D_10, DA850_LCD_D_11, DA850_LCD_D_12, | 593 | DA850_LCD_D_8, DA850_LCD_D_9, DA850_LCD_D_10, DA850_LCD_D_11, |
561 | DA850_LCD_D_13, DA850_LCD_D_14, DA850_LCD_D_15, DA850_LCD_PCLK, | 594 | DA850_LCD_D_12, DA850_LCD_D_13, DA850_LCD_D_14, DA850_LCD_D_15, |
562 | DA850_LCD_HSYNC, DA850_LCD_VSYNC, DA850_NLCD_AC_ENB_CS, DA850_GPIO2_15, | 595 | DA850_LCD_PCLK, DA850_LCD_HSYNC, DA850_LCD_VSYNC, DA850_NLCD_AC_ENB_CS, |
563 | DA850_GPIO8_10, | ||
564 | -1 | 596 | -1 |
565 | }; | 597 | }; |
566 | 598 | ||
@@ -790,16 +822,221 @@ static struct davinci_timer_info da850_timer_info = { | |||
790 | .clocksource_id = T0_TOP, | 822 | .clocksource_id = T0_TOP, |
791 | }; | 823 | }; |
792 | 824 | ||
825 | static void da850_set_async3_src(int pllnum) | ||
826 | { | ||
827 | struct clk *clk, *newparent = pllnum ? &pll1_sysclk2 : &pll0_sysclk2; | ||
828 | struct davinci_clk *c; | ||
829 | unsigned int v; | ||
830 | int ret; | ||
831 | |||
832 | for (c = da850_clks; c->lk.clk; c++) { | ||
833 | clk = c->lk.clk; | ||
834 | if (clk->flags & DA850_CLK_ASYNC3) { | ||
835 | ret = clk_set_parent(clk, newparent); | ||
836 | WARN(ret, "DA850: unable to re-parent clock %s", | ||
837 | clk->name); | ||
838 | } | ||
839 | } | ||
840 | |||
841 | v = __raw_readl(DA8XX_SYSCFG_VIRT(DA8XX_CFGCHIP3_REG)); | ||
842 | if (pllnum) | ||
843 | v |= CFGCHIP3_ASYNC3_CLKSRC; | ||
844 | else | ||
845 | v &= ~CFGCHIP3_ASYNC3_CLKSRC; | ||
846 | __raw_writel(v, DA8XX_SYSCFG_VIRT(DA8XX_CFGCHIP3_REG)); | ||
847 | } | ||
848 | |||
849 | #ifdef CONFIG_CPU_FREQ | ||
850 | /* | ||
851 | * Notes: | ||
852 | * According to the TRM, minimum PLLM results in maximum power savings. | ||
853 | * The OPP definitions below should keep the PLLM as low as possible. | ||
854 | * | ||
855 | * The output of the PLLM must be between 400 to 600 MHz. | ||
856 | * This rules out prediv of anything but divide-by-one for 24Mhz OSC input. | ||
857 | */ | ||
858 | struct da850_opp { | ||
859 | unsigned int freq; /* in KHz */ | ||
860 | unsigned int prediv; | ||
861 | unsigned int mult; | ||
862 | unsigned int postdiv; | ||
863 | unsigned int cvdd_min; /* in uV */ | ||
864 | unsigned int cvdd_max; /* in uV */ | ||
865 | }; | ||
866 | |||
867 | static const struct da850_opp da850_opp_300 = { | ||
868 | .freq = 300000, | ||
869 | .prediv = 1, | ||
870 | .mult = 25, | ||
871 | .postdiv = 2, | ||
872 | .cvdd_min = 1140000, | ||
873 | .cvdd_max = 1320000, | ||
874 | }; | ||
875 | |||
876 | static const struct da850_opp da850_opp_200 = { | ||
877 | .freq = 200000, | ||
878 | .prediv = 1, | ||
879 | .mult = 25, | ||
880 | .postdiv = 3, | ||
881 | .cvdd_min = 1050000, | ||
882 | .cvdd_max = 1160000, | ||
883 | }; | ||
884 | |||
885 | static const struct da850_opp da850_opp_96 = { | ||
886 | .freq = 96000, | ||
887 | .prediv = 1, | ||
888 | .mult = 20, | ||
889 | .postdiv = 5, | ||
890 | .cvdd_min = 950000, | ||
891 | .cvdd_max = 1050000, | ||
892 | }; | ||
893 | |||
894 | #define OPP(freq) \ | ||
895 | { \ | ||
896 | .index = (unsigned int) &da850_opp_##freq, \ | ||
897 | .frequency = freq * 1000, \ | ||
898 | } | ||
899 | |||
900 | static struct cpufreq_frequency_table da850_freq_table[] = { | ||
901 | OPP(300), | ||
902 | OPP(200), | ||
903 | OPP(96), | ||
904 | { | ||
905 | .index = 0, | ||
906 | .frequency = CPUFREQ_TABLE_END, | ||
907 | }, | ||
908 | }; | ||
909 | |||
910 | #ifdef CONFIG_REGULATOR | ||
911 | static struct regulator *cvdd; | ||
912 | |||
913 | static int da850_set_voltage(unsigned int index) | ||
914 | { | ||
915 | struct da850_opp *opp; | ||
916 | |||
917 | if (!cvdd) | ||
918 | return -ENODEV; | ||
919 | |||
920 | opp = (struct da850_opp *) da850_freq_table[index].index; | ||
921 | |||
922 | return regulator_set_voltage(cvdd, opp->cvdd_min, opp->cvdd_max); | ||
923 | } | ||
924 | |||
925 | static int da850_regulator_init(void) | ||
926 | { | ||
927 | cvdd = regulator_get(NULL, "cvdd"); | ||
928 | if (WARN(IS_ERR(cvdd), "Unable to obtain voltage regulator for CVDD;" | ||
929 | " voltage scaling unsupported\n")) { | ||
930 | return PTR_ERR(cvdd); | ||
931 | } | ||
932 | |||
933 | return 0; | ||
934 | } | ||
935 | #endif | ||
936 | |||
937 | static struct davinci_cpufreq_config cpufreq_info = { | ||
938 | .freq_table = &da850_freq_table[0], | ||
939 | #ifdef CONFIG_REGULATOR | ||
940 | .init = da850_regulator_init, | ||
941 | .set_voltage = da850_set_voltage, | ||
942 | #endif | ||
943 | }; | ||
944 | |||
945 | static struct platform_device da850_cpufreq_device = { | ||
946 | .name = "cpufreq-davinci", | ||
947 | .dev = { | ||
948 | .platform_data = &cpufreq_info, | ||
949 | }, | ||
950 | }; | ||
951 | |||
952 | int __init da850_register_cpufreq(void) | ||
953 | { | ||
954 | return platform_device_register(&da850_cpufreq_device); | ||
955 | } | ||
956 | |||
957 | static int da850_round_armrate(struct clk *clk, unsigned long rate) | ||
958 | { | ||
959 | int i, ret = 0, diff; | ||
960 | unsigned int best = (unsigned int) -1; | ||
961 | |||
962 | rate /= 1000; /* convert to kHz */ | ||
963 | |||
964 | for (i = 0; da850_freq_table[i].frequency != CPUFREQ_TABLE_END; i++) { | ||
965 | diff = da850_freq_table[i].frequency - rate; | ||
966 | if (diff < 0) | ||
967 | diff = -diff; | ||
968 | |||
969 | if (diff < best) { | ||
970 | best = diff; | ||
971 | ret = da850_freq_table[i].frequency; | ||
972 | } | ||
973 | } | ||
974 | |||
975 | return ret * 1000; | ||
976 | } | ||
977 | |||
978 | static int da850_set_armrate(struct clk *clk, unsigned long index) | ||
979 | { | ||
980 | struct clk *pllclk = &pll0_clk; | ||
981 | |||
982 | return clk_set_rate(pllclk, index); | ||
983 | } | ||
984 | |||
985 | static int da850_set_pll0rate(struct clk *clk, unsigned long index) | ||
986 | { | ||
987 | unsigned int prediv, mult, postdiv; | ||
988 | struct da850_opp *opp; | ||
989 | struct pll_data *pll = clk->pll_data; | ||
990 | unsigned int v; | ||
991 | int ret; | ||
992 | |||
993 | opp = (struct da850_opp *) da850_freq_table[index].index; | ||
994 | prediv = opp->prediv; | ||
995 | mult = opp->mult; | ||
996 | postdiv = opp->postdiv; | ||
997 | |||
998 | /* Unlock writing to PLL registers */ | ||
999 | v = __raw_readl(DA8XX_SYSCFG_VIRT(DA8XX_CFGCHIP0_REG)); | ||
1000 | v &= ~CFGCHIP0_PLL_MASTER_LOCK; | ||
1001 | __raw_writel(v, DA8XX_SYSCFG_VIRT(DA8XX_CFGCHIP0_REG)); | ||
1002 | |||
1003 | ret = davinci_set_pllrate(pll, prediv, mult, postdiv); | ||
1004 | if (WARN_ON(ret)) | ||
1005 | return ret; | ||
1006 | |||
1007 | return 0; | ||
1008 | } | ||
1009 | #else | ||
1010 | int __init da850_register_cpufreq(void) | ||
1011 | { | ||
1012 | return 0; | ||
1013 | } | ||
1014 | |||
1015 | static int da850_set_armrate(struct clk *clk, unsigned long rate) | ||
1016 | { | ||
1017 | return -EINVAL; | ||
1018 | } | ||
1019 | |||
1020 | static int da850_set_pll0rate(struct clk *clk, unsigned long armrate) | ||
1021 | { | ||
1022 | return -EINVAL; | ||
1023 | } | ||
1024 | |||
1025 | static int da850_round_armrate(struct clk *clk, unsigned long rate) | ||
1026 | { | ||
1027 | return clk->rate; | ||
1028 | } | ||
1029 | #endif | ||
1030 | |||
1031 | |||
793 | static struct davinci_soc_info davinci_soc_info_da850 = { | 1032 | static struct davinci_soc_info davinci_soc_info_da850 = { |
794 | .io_desc = da850_io_desc, | 1033 | .io_desc = da850_io_desc, |
795 | .io_desc_num = ARRAY_SIZE(da850_io_desc), | 1034 | .io_desc_num = ARRAY_SIZE(da850_io_desc), |
796 | .jtag_id_base = IO_ADDRESS(DA8XX_JTAG_ID_REG), | ||
797 | .ids = da850_ids, | 1035 | .ids = da850_ids, |
798 | .ids_num = ARRAY_SIZE(da850_ids), | 1036 | .ids_num = ARRAY_SIZE(da850_ids), |
799 | .cpu_clks = da850_clks, | 1037 | .cpu_clks = da850_clks, |
800 | .psc_bases = da850_psc_bases, | 1038 | .psc_bases = da850_psc_bases, |
801 | .psc_bases_num = ARRAY_SIZE(da850_psc_bases), | 1039 | .psc_bases_num = ARRAY_SIZE(da850_psc_bases), |
802 | .pinmux_base = IO_ADDRESS(DA8XX_BOOT_CFG_BASE + 0x120), | ||
803 | .pinmux_pins = da850_pins, | 1040 | .pinmux_pins = da850_pins, |
804 | .pinmux_pins_num = ARRAY_SIZE(da850_pins), | 1041 | .pinmux_pins_num = ARRAY_SIZE(da850_pins), |
805 | .intc_base = (void __iomem *)DA8XX_CP_INTC_VIRT, | 1042 | .intc_base = (void __iomem *)DA8XX_CP_INTC_VIRT, |
@@ -816,5 +1053,22 @@ static struct davinci_soc_info davinci_soc_info_da850 = { | |||
816 | 1053 | ||
817 | void __init da850_init(void) | 1054 | void __init da850_init(void) |
818 | { | 1055 | { |
1056 | da8xx_syscfg_base = ioremap(DA8XX_SYSCFG_BASE, SZ_4K); | ||
1057 | if (WARN(!da8xx_syscfg_base, "Unable to map syscfg module")) | ||
1058 | return; | ||
1059 | |||
1060 | davinci_soc_info_da850.jtag_id_base = | ||
1061 | DA8XX_SYSCFG_VIRT(DA8XX_JTAG_ID_REG); | ||
1062 | davinci_soc_info_da850.pinmux_base = DA8XX_SYSCFG_VIRT(0x120); | ||
1063 | |||
819 | davinci_common_init(&davinci_soc_info_da850); | 1064 | davinci_common_init(&davinci_soc_info_da850); |
1065 | |||
1066 | /* | ||
1067 | * Move the clock source of Async3 domain to PLL1 SYSCLK2. | ||
1068 | * This helps keeping the peripherals on this domain insulated | ||
1069 | * from CPU frequency changes caused by DVFS. The firmware sets | ||
1070 | * both PLL0 and PLL1 to the same frequency so, there should not | ||
1071 | * be any noticible change even in non-DVFS use cases. | ||
1072 | */ | ||
1073 | da850_set_async3_src(1); | ||
820 | } | 1074 | } |
diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c index 58ad5b66fd60..dd2d32c4ce86 100644 --- a/arch/arm/mach-davinci/devices-da8xx.c +++ b/arch/arm/mach-davinci/devices-da8xx.c | |||
@@ -10,8 +10,6 @@ | |||
10 | * the Free Software Foundation; either version 2 of the License, or | 10 | * the Free Software Foundation; either version 2 of the License, or |
11 | * (at your option) any later version. | 11 | * (at your option) any later version. |
12 | */ | 12 | */ |
13 | #include <linux/module.h> | ||
14 | #include <linux/kernel.h> | ||
15 | #include <linux/init.h> | 13 | #include <linux/init.h> |
16 | #include <linux/platform_device.h> | 14 | #include <linux/platform_device.h> |
17 | #include <linux/dma-mapping.h> | 15 | #include <linux/dma-mapping.h> |
@@ -21,7 +19,7 @@ | |||
21 | #include <mach/common.h> | 19 | #include <mach/common.h> |
22 | #include <mach/time.h> | 20 | #include <mach/time.h> |
23 | #include <mach/da8xx.h> | 21 | #include <mach/da8xx.h> |
24 | #include <video/da8xx-fb.h> | 22 | #include <mach/cpuidle.h> |
25 | 23 | ||
26 | #include "clock.h" | 24 | #include "clock.h" |
27 | 25 | ||
@@ -30,6 +28,7 @@ | |||
30 | #define DA8XX_TPTC1_BASE 0x01c08400 | 28 | #define DA8XX_TPTC1_BASE 0x01c08400 |
31 | #define DA8XX_WDOG_BASE 0x01c21000 /* DA8XX_TIMER64P1_BASE */ | 29 | #define DA8XX_WDOG_BASE 0x01c21000 /* DA8XX_TIMER64P1_BASE */ |
32 | #define DA8XX_I2C0_BASE 0x01c22000 | 30 | #define DA8XX_I2C0_BASE 0x01c22000 |
31 | #define DA8XX_RTC_BASE 0x01C23000 | ||
33 | #define DA8XX_EMAC_CPPI_PORT_BASE 0x01e20000 | 32 | #define DA8XX_EMAC_CPPI_PORT_BASE 0x01e20000 |
34 | #define DA8XX_EMAC_CPGMACSS_BASE 0x01e22000 | 33 | #define DA8XX_EMAC_CPGMACSS_BASE 0x01e22000 |
35 | #define DA8XX_EMAC_CPGMAC_BASE 0x01e23000 | 34 | #define DA8XX_EMAC_CPGMAC_BASE 0x01e23000 |
@@ -43,6 +42,8 @@ | |||
43 | #define DA8XX_MDIO_REG_OFFSET 0x4000 | 42 | #define DA8XX_MDIO_REG_OFFSET 0x4000 |
44 | #define DA8XX_EMAC_CTRL_RAM_SIZE SZ_8K | 43 | #define DA8XX_EMAC_CTRL_RAM_SIZE SZ_8K |
45 | 44 | ||
45 | void __iomem *da8xx_syscfg_base; | ||
46 | |||
46 | static struct plat_serial8250_port da8xx_serial_pdata[] = { | 47 | static struct plat_serial8250_port da8xx_serial_pdata[] = { |
47 | { | 48 | { |
48 | .mapbase = DA8XX_UART0_BASE, | 49 | .mapbase = DA8XX_UART0_BASE, |
@@ -282,6 +283,11 @@ static struct platform_device da8xx_emac_device = { | |||
282 | .resource = da8xx_emac_resources, | 283 | .resource = da8xx_emac_resources, |
283 | }; | 284 | }; |
284 | 285 | ||
286 | int __init da8xx_register_emac(void) | ||
287 | { | ||
288 | return platform_device_register(&da8xx_emac_device); | ||
289 | } | ||
290 | |||
285 | static struct resource da830_mcasp1_resources[] = { | 291 | static struct resource da830_mcasp1_resources[] = { |
286 | { | 292 | { |
287 | .name = "mcasp1", | 293 | .name = "mcasp1", |
@@ -338,12 +344,7 @@ static struct platform_device da850_mcasp_device = { | |||
338 | .resource = da850_mcasp_resources, | 344 | .resource = da850_mcasp_resources, |
339 | }; | 345 | }; |
340 | 346 | ||
341 | int __init da8xx_register_emac(void) | 347 | void __init da8xx_register_mcasp(int id, struct snd_platform_data *pdata) |
342 | { | ||
343 | return platform_device_register(&da8xx_emac_device); | ||
344 | } | ||
345 | |||
346 | void __init da8xx_init_mcasp(int id, struct snd_platform_data *pdata) | ||
347 | { | 348 | { |
348 | /* DA830/OMAP-L137 has 3 instances of McASP */ | 349 | /* DA830/OMAP-L137 has 3 instances of McASP */ |
349 | if (cpu_is_davinci_da830() && id == 1) { | 350 | if (cpu_is_davinci_da830() && id == 1) { |
@@ -379,10 +380,16 @@ static struct lcd_ctrl_config lcd_cfg = { | |||
379 | .raster_order = 0, | 380 | .raster_order = 0, |
380 | }; | 381 | }; |
381 | 382 | ||
382 | static struct da8xx_lcdc_platform_data da850_evm_lcdc_pdata = { | 383 | struct da8xx_lcdc_platform_data sharp_lcd035q3dg01_pdata = { |
383 | .manu_name = "sharp", | 384 | .manu_name = "sharp", |
384 | .controller_data = &lcd_cfg, | 385 | .controller_data = &lcd_cfg, |
385 | .type = "Sharp_LK043T1DG01", | 386 | .type = "Sharp_LCD035Q3DG01", |
387 | }; | ||
388 | |||
389 | struct da8xx_lcdc_platform_data sharp_lk043t1dg01_pdata = { | ||
390 | .manu_name = "sharp", | ||
391 | .controller_data = &lcd_cfg, | ||
392 | .type = "Sharp_LK043T1DG01", | ||
386 | }; | 393 | }; |
387 | 394 | ||
388 | static struct resource da8xx_lcdc_resources[] = { | 395 | static struct resource da8xx_lcdc_resources[] = { |
@@ -398,19 +405,17 @@ static struct resource da8xx_lcdc_resources[] = { | |||
398 | }, | 405 | }, |
399 | }; | 406 | }; |
400 | 407 | ||
401 | static struct platform_device da850_lcdc_device = { | 408 | static struct platform_device da8xx_lcdc_device = { |
402 | .name = "da8xx_lcdc", | 409 | .name = "da8xx_lcdc", |
403 | .id = 0, | 410 | .id = 0, |
404 | .num_resources = ARRAY_SIZE(da8xx_lcdc_resources), | 411 | .num_resources = ARRAY_SIZE(da8xx_lcdc_resources), |
405 | .resource = da8xx_lcdc_resources, | 412 | .resource = da8xx_lcdc_resources, |
406 | .dev = { | ||
407 | .platform_data = &da850_evm_lcdc_pdata, | ||
408 | } | ||
409 | }; | 413 | }; |
410 | 414 | ||
411 | int __init da8xx_register_lcdc(void) | 415 | int __init da8xx_register_lcdc(struct da8xx_lcdc_platform_data *pdata) |
412 | { | 416 | { |
413 | return platform_device_register(&da850_lcdc_device); | 417 | da8xx_lcdc_device.dev.platform_data = pdata; |
418 | return platform_device_register(&da8xx_lcdc_device); | ||
414 | } | 419 | } |
415 | 420 | ||
416 | static struct resource da8xx_mmcsd0_resources[] = { | 421 | static struct resource da8xx_mmcsd0_resources[] = { |
@@ -448,3 +453,66 @@ int __init da8xx_register_mmcsd0(struct davinci_mmc_config *config) | |||
448 | da8xx_mmcsd0_device.dev.platform_data = config; | 453 | da8xx_mmcsd0_device.dev.platform_data = config; |
449 | return platform_device_register(&da8xx_mmcsd0_device); | 454 | return platform_device_register(&da8xx_mmcsd0_device); |
450 | } | 455 | } |
456 | |||
457 | static struct resource da8xx_rtc_resources[] = { | ||
458 | { | ||
459 | .start = DA8XX_RTC_BASE, | ||
460 | .end = DA8XX_RTC_BASE + SZ_4K - 1, | ||
461 | .flags = IORESOURCE_MEM, | ||
462 | }, | ||
463 | { /* timer irq */ | ||
464 | .start = IRQ_DA8XX_RTC, | ||
465 | .end = IRQ_DA8XX_RTC, | ||
466 | .flags = IORESOURCE_IRQ, | ||
467 | }, | ||
468 | { /* alarm irq */ | ||
469 | .start = IRQ_DA8XX_RTC, | ||
470 | .end = IRQ_DA8XX_RTC, | ||
471 | .flags = IORESOURCE_IRQ, | ||
472 | }, | ||
473 | }; | ||
474 | |||
475 | static struct platform_device da8xx_rtc_device = { | ||
476 | .name = "omap_rtc", | ||
477 | .id = -1, | ||
478 | .num_resources = ARRAY_SIZE(da8xx_rtc_resources), | ||
479 | .resource = da8xx_rtc_resources, | ||
480 | }; | ||
481 | |||
482 | int da8xx_register_rtc(void) | ||
483 | { | ||
484 | /* Unlock the rtc's registers */ | ||
485 | __raw_writel(0x83e70b13, IO_ADDRESS(DA8XX_RTC_BASE + 0x6c)); | ||
486 | __raw_writel(0x95a4f1e0, IO_ADDRESS(DA8XX_RTC_BASE + 0x70)); | ||
487 | |||
488 | return platform_device_register(&da8xx_rtc_device); | ||
489 | } | ||
490 | |||
491 | static struct resource da8xx_cpuidle_resources[] = { | ||
492 | { | ||
493 | .start = DA8XX_DDR2_CTL_BASE, | ||
494 | .end = DA8XX_DDR2_CTL_BASE + SZ_32K - 1, | ||
495 | .flags = IORESOURCE_MEM, | ||
496 | }, | ||
497 | }; | ||
498 | |||
499 | /* DA8XX devices support DDR2 power down */ | ||
500 | static struct davinci_cpuidle_config da8xx_cpuidle_pdata = { | ||
501 | .ddr2_pdown = 1, | ||
502 | }; | ||
503 | |||
504 | |||
505 | static struct platform_device da8xx_cpuidle_device = { | ||
506 | .name = "cpuidle-davinci", | ||
507 | .num_resources = ARRAY_SIZE(da8xx_cpuidle_resources), | ||
508 | .resource = da8xx_cpuidle_resources, | ||
509 | .dev = { | ||
510 | .platform_data = &da8xx_cpuidle_pdata, | ||
511 | }, | ||
512 | }; | ||
513 | |||
514 | int __init da8xx_register_cpuidle(void) | ||
515 | { | ||
516 | return platform_device_register(&da8xx_cpuidle_device); | ||
517 | } | ||
518 | |||
diff --git a/arch/arm/mach-davinci/devices.c b/arch/arm/mach-davinci/devices.c index a55b650db71e..147949650c25 100644 --- a/arch/arm/mach-davinci/devices.c +++ b/arch/arm/mach-davinci/devices.c | |||
@@ -9,15 +9,11 @@ | |||
9 | * (at your option) any later version. | 9 | * (at your option) any later version. |
10 | */ | 10 | */ |
11 | 11 | ||
12 | #include <linux/module.h> | ||
13 | #include <linux/kernel.h> | ||
14 | #include <linux/init.h> | 12 | #include <linux/init.h> |
15 | #include <linux/platform_device.h> | 13 | #include <linux/platform_device.h> |
16 | #include <linux/dma-mapping.h> | 14 | #include <linux/dma-mapping.h> |
17 | #include <linux/io.h> | 15 | #include <linux/io.h> |
18 | 16 | ||
19 | #include <asm/mach/map.h> | ||
20 | |||
21 | #include <mach/hardware.h> | 17 | #include <mach/hardware.h> |
22 | #include <mach/i2c.h> | 18 | #include <mach/i2c.h> |
23 | #include <mach/irqs.h> | 19 | #include <mach/irqs.h> |
@@ -177,7 +173,7 @@ void __init davinci_setup_mmc(int module, struct davinci_mmc_config *config) | |||
177 | mmcsd1_resources[0].start = DM365_MMCSD1_BASE; | 173 | mmcsd1_resources[0].start = DM365_MMCSD1_BASE; |
178 | mmcsd1_resources[0].end = DM365_MMCSD1_BASE + | 174 | mmcsd1_resources[0].end = DM365_MMCSD1_BASE + |
179 | SZ_4K - 1; | 175 | SZ_4K - 1; |
180 | mmcsd0_resources[2].start = IRQ_DM365_SDIOINT1; | 176 | mmcsd1_resources[2].start = IRQ_DM365_SDIOINT1; |
181 | } else | 177 | } else |
182 | break; | 178 | break; |
183 | 179 | ||
diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c index 059670018aff..dedf4d4f3a27 100644 --- a/arch/arm/mach-davinci/dm355.c +++ b/arch/arm/mach-davinci/dm355.c | |||
@@ -8,7 +8,6 @@ | |||
8 | * is licensed "as is" without any warranty of any kind, whether express | 8 | * is licensed "as is" without any warranty of any kind, whether express |
9 | * or implied. | 9 | * or implied. |
10 | */ | 10 | */ |
11 | #include <linux/kernel.h> | ||
12 | #include <linux/init.h> | 11 | #include <linux/init.h> |
13 | #include <linux/clk.h> | 12 | #include <linux/clk.h> |
14 | #include <linux/serial_8250.h> | 13 | #include <linux/serial_8250.h> |
@@ -21,7 +20,6 @@ | |||
21 | #include <asm/mach/map.h> | 20 | #include <asm/mach/map.h> |
22 | 21 | ||
23 | #include <mach/dm355.h> | 22 | #include <mach/dm355.h> |
24 | #include <mach/clock.h> | ||
25 | #include <mach/cputype.h> | 23 | #include <mach/cputype.h> |
26 | #include <mach/edma.h> | 24 | #include <mach/edma.h> |
27 | #include <mach/psc.h> | 25 | #include <mach/psc.h> |
diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c index e81517434703..2ec619ec1657 100644 --- a/arch/arm/mach-davinci/dm365.c +++ b/arch/arm/mach-davinci/dm365.c | |||
@@ -12,7 +12,6 @@ | |||
12 | * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | 12 | * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
13 | * GNU General Public License for more details. | 13 | * GNU General Public License for more details. |
14 | */ | 14 | */ |
15 | #include <linux/kernel.h> | ||
16 | #include <linux/init.h> | 15 | #include <linux/init.h> |
17 | #include <linux/clk.h> | 16 | #include <linux/clk.h> |
18 | #include <linux/serial_8250.h> | 17 | #include <linux/serial_8250.h> |
@@ -23,7 +22,6 @@ | |||
23 | #include <asm/mach/map.h> | 22 | #include <asm/mach/map.h> |
24 | 23 | ||
25 | #include <mach/dm365.h> | 24 | #include <mach/dm365.h> |
26 | #include <mach/clock.h> | ||
27 | #include <mach/cputype.h> | 25 | #include <mach/cputype.h> |
28 | #include <mach/edma.h> | 26 | #include <mach/edma.h> |
29 | #include <mach/psc.h> | 27 | #include <mach/psc.h> |
@@ -32,6 +30,8 @@ | |||
32 | #include <mach/time.h> | 30 | #include <mach/time.h> |
33 | #include <mach/serial.h> | 31 | #include <mach/serial.h> |
34 | #include <mach/common.h> | 32 | #include <mach/common.h> |
33 | #include <mach/asp.h> | ||
34 | #include <mach/keyscan.h> | ||
35 | 35 | ||
36 | #include "clock.h" | 36 | #include "clock.h" |
37 | #include "mux.h" | 37 | #include "mux.h" |
@@ -369,7 +369,7 @@ static struct clk timer3_clk = { | |||
369 | 369 | ||
370 | static struct clk usb_clk = { | 370 | static struct clk usb_clk = { |
371 | .name = "usb", | 371 | .name = "usb", |
372 | .parent = &pll2_sysclk1, | 372 | .parent = &pll1_aux_clk, |
373 | .lpsc = DAVINCI_LPSC_USB, | 373 | .lpsc = DAVINCI_LPSC_USB, |
374 | }; | 374 | }; |
375 | 375 | ||
@@ -456,7 +456,7 @@ static struct davinci_clk dm365_clks[] = { | |||
456 | CLK(NULL, "usb", &usb_clk), | 456 | CLK(NULL, "usb", &usb_clk), |
457 | CLK("davinci_emac.1", NULL, &emac_clk), | 457 | CLK("davinci_emac.1", NULL, &emac_clk), |
458 | CLK("voice_codec", NULL, &voicecodec_clk), | 458 | CLK("voice_codec", NULL, &voicecodec_clk), |
459 | CLK("soc-audio.0", NULL, &asp0_clk), | 459 | CLK("davinci-asp.0", NULL, &asp0_clk), |
460 | CLK(NULL, "rto", &rto_clk), | 460 | CLK(NULL, "rto", &rto_clk), |
461 | CLK(NULL, "mjcp", &mjcp_clk), | 461 | CLK(NULL, "mjcp", &mjcp_clk), |
462 | CLK(NULL, NULL, NULL), | 462 | CLK(NULL, NULL, NULL), |
@@ -531,7 +531,7 @@ MUX_CFG(DM365, EMAC_CRS, 3, 2, 1, 1, false) | |||
531 | MUX_CFG(DM365, EMAC_MDIO, 3, 1, 1, 1, false) | 531 | MUX_CFG(DM365, EMAC_MDIO, 3, 1, 1, 1, false) |
532 | MUX_CFG(DM365, EMAC_MDCLK, 3, 0, 1, 1, false) | 532 | MUX_CFG(DM365, EMAC_MDCLK, 3, 0, 1, 1, false) |
533 | 533 | ||
534 | MUX_CFG(DM365, KEYPAD, 2, 0, 0x3f, 0x3f, false) | 534 | MUX_CFG(DM365, KEYSCAN, 2, 0, 0x3f, 0x3f, false) |
535 | 535 | ||
536 | MUX_CFG(DM365, PWM0, 1, 0, 3, 2, false) | 536 | MUX_CFG(DM365, PWM0, 1, 0, 3, 2, false) |
537 | MUX_CFG(DM365, PWM0_G23, 3, 26, 3, 3, false) | 537 | MUX_CFG(DM365, PWM0_G23, 3, 26, 3, 3, false) |
@@ -603,6 +603,9 @@ INT_CFG(DM365, INT_IMX1_ENABLE, 24, 1, 1, false) | |||
603 | INT_CFG(DM365, INT_IMX1_DISABLE, 24, 1, 0, false) | 603 | INT_CFG(DM365, INT_IMX1_DISABLE, 24, 1, 0, false) |
604 | INT_CFG(DM365, INT_NSF_ENABLE, 25, 1, 1, false) | 604 | INT_CFG(DM365, INT_NSF_ENABLE, 25, 1, 1, false) |
605 | INT_CFG(DM365, INT_NSF_DISABLE, 25, 1, 0, false) | 605 | INT_CFG(DM365, INT_NSF_DISABLE, 25, 1, 0, false) |
606 | |||
607 | EVT_CFG(DM365, EVT2_ASP_TX, 0, 1, 0, false) | ||
608 | EVT_CFG(DM365, EVT3_ASP_RX, 1, 1, 0, false) | ||
606 | #endif | 609 | #endif |
607 | }; | 610 | }; |
608 | 611 | ||
@@ -696,6 +699,7 @@ static u8 dm365_default_priorities[DAVINCI_N_AINTC_IRQ] = { | |||
696 | [IRQ_I2C] = 3, | 699 | [IRQ_I2C] = 3, |
697 | [IRQ_UARTINT0] = 3, | 700 | [IRQ_UARTINT0] = 3, |
698 | [IRQ_UARTINT1] = 3, | 701 | [IRQ_UARTINT1] = 3, |
702 | [IRQ_DM365_RTCINT] = 3, | ||
699 | [IRQ_DM365_SPIINT0_0] = 3, | 703 | [IRQ_DM365_SPIINT0_0] = 3, |
700 | [IRQ_DM365_SPIINT3_0] = 3, | 704 | [IRQ_DM365_SPIINT3_0] = 3, |
701 | [IRQ_DM365_GPIO0] = 3, | 705 | [IRQ_DM365_GPIO0] = 3, |
@@ -806,6 +810,50 @@ static struct platform_device dm365_edma_device = { | |||
806 | .resource = edma_resources, | 810 | .resource = edma_resources, |
807 | }; | 811 | }; |
808 | 812 | ||
813 | static struct resource dm365_asp_resources[] = { | ||
814 | { | ||
815 | .start = DAVINCI_DM365_ASP0_BASE, | ||
816 | .end = DAVINCI_DM365_ASP0_BASE + SZ_8K - 1, | ||
817 | .flags = IORESOURCE_MEM, | ||
818 | }, | ||
819 | { | ||
820 | .start = DAVINCI_DMA_ASP0_TX, | ||
821 | .end = DAVINCI_DMA_ASP0_TX, | ||
822 | .flags = IORESOURCE_DMA, | ||
823 | }, | ||
824 | { | ||
825 | .start = DAVINCI_DMA_ASP0_RX, | ||
826 | .end = DAVINCI_DMA_ASP0_RX, | ||
827 | .flags = IORESOURCE_DMA, | ||
828 | }, | ||
829 | }; | ||
830 | |||
831 | static struct platform_device dm365_asp_device = { | ||
832 | .name = "davinci-asp", | ||
833 | .id = 0, | ||
834 | .num_resources = ARRAY_SIZE(dm365_asp_resources), | ||
835 | .resource = dm365_asp_resources, | ||
836 | }; | ||
837 | |||
838 | static struct resource dm365_rtc_resources[] = { | ||
839 | { | ||
840 | .start = DM365_RTC_BASE, | ||
841 | .end = DM365_RTC_BASE + SZ_1K - 1, | ||
842 | .flags = IORESOURCE_MEM, | ||
843 | }, | ||
844 | { | ||
845 | .start = IRQ_DM365_RTCINT, | ||
846 | .flags = IORESOURCE_IRQ, | ||
847 | }, | ||
848 | }; | ||
849 | |||
850 | static struct platform_device dm365_rtc_device = { | ||
851 | .name = "rtc_davinci", | ||
852 | .id = 0, | ||
853 | .num_resources = ARRAY_SIZE(dm365_rtc_resources), | ||
854 | .resource = dm365_rtc_resources, | ||
855 | }; | ||
856 | |||
809 | static struct map_desc dm365_io_desc[] = { | 857 | static struct map_desc dm365_io_desc[] = { |
810 | { | 858 | { |
811 | .virtual = IO_VIRT, | 859 | .virtual = IO_VIRT, |
@@ -822,6 +870,28 @@ static struct map_desc dm365_io_desc[] = { | |||
822 | }, | 870 | }, |
823 | }; | 871 | }; |
824 | 872 | ||
873 | static struct resource dm365_ks_resources[] = { | ||
874 | { | ||
875 | /* registers */ | ||
876 | .start = DM365_KEYSCAN_BASE, | ||
877 | .end = DM365_KEYSCAN_BASE + SZ_1K - 1, | ||
878 | .flags = IORESOURCE_MEM, | ||
879 | }, | ||
880 | { | ||
881 | /* interrupt */ | ||
882 | .start = IRQ_DM365_KEYINT, | ||
883 | .end = IRQ_DM365_KEYINT, | ||
884 | .flags = IORESOURCE_IRQ, | ||
885 | }, | ||
886 | }; | ||
887 | |||
888 | static struct platform_device dm365_ks_device = { | ||
889 | .name = "davinci_keyscan", | ||
890 | .id = 0, | ||
891 | .num_resources = ARRAY_SIZE(dm365_ks_resources), | ||
892 | .resource = dm365_ks_resources, | ||
893 | }; | ||
894 | |||
825 | /* Contents of JTAG ID register used to identify exact cpu type */ | 895 | /* Contents of JTAG ID register used to identify exact cpu type */ |
826 | static struct davinci_id dm365_ids[] = { | 896 | static struct davinci_id dm365_ids[] = { |
827 | { | 897 | { |
@@ -907,6 +977,33 @@ static struct davinci_soc_info davinci_soc_info_dm365 = { | |||
907 | .sram_len = SZ_32K, | 977 | .sram_len = SZ_32K, |
908 | }; | 978 | }; |
909 | 979 | ||
980 | void __init dm365_init_asp(struct snd_platform_data *pdata) | ||
981 | { | ||
982 | davinci_cfg_reg(DM365_MCBSP0_BDX); | ||
983 | davinci_cfg_reg(DM365_MCBSP0_X); | ||
984 | davinci_cfg_reg(DM365_MCBSP0_BFSX); | ||
985 | davinci_cfg_reg(DM365_MCBSP0_BDR); | ||
986 | davinci_cfg_reg(DM365_MCBSP0_R); | ||
987 | davinci_cfg_reg(DM365_MCBSP0_BFSR); | ||
988 | davinci_cfg_reg(DM365_EVT2_ASP_TX); | ||
989 | davinci_cfg_reg(DM365_EVT3_ASP_RX); | ||
990 | dm365_asp_device.dev.platform_data = pdata; | ||
991 | platform_device_register(&dm365_asp_device); | ||
992 | } | ||
993 | |||
994 | void __init dm365_init_ks(struct davinci_ks_platform_data *pdata) | ||
995 | { | ||
996 | davinci_cfg_reg(DM365_KEYSCAN); | ||
997 | dm365_ks_device.dev.platform_data = pdata; | ||
998 | platform_device_register(&dm365_ks_device); | ||
999 | } | ||
1000 | |||
1001 | void __init dm365_init_rtc(void) | ||
1002 | { | ||
1003 | davinci_cfg_reg(DM365_INT_PRTCSS); | ||
1004 | platform_device_register(&dm365_rtc_device); | ||
1005 | } | ||
1006 | |||
910 | void __init dm365_init(void) | 1007 | void __init dm365_init(void) |
911 | { | 1008 | { |
912 | davinci_common_init(&davinci_soc_info_dm365); | 1009 | davinci_common_init(&davinci_soc_info_dm365); |
diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c index d6e0fa5a8d8a..2cd008156dea 100644 --- a/arch/arm/mach-davinci/dm644x.c +++ b/arch/arm/mach-davinci/dm644x.c | |||
@@ -8,7 +8,6 @@ | |||
8 | * is licensed "as is" without any warranty of any kind, whether express | 8 | * is licensed "as is" without any warranty of any kind, whether express |
9 | * or implied. | 9 | * or implied. |
10 | */ | 10 | */ |
11 | #include <linux/kernel.h> | ||
12 | #include <linux/init.h> | 11 | #include <linux/init.h> |
13 | #include <linux/clk.h> | 12 | #include <linux/clk.h> |
14 | #include <linux/serial_8250.h> | 13 | #include <linux/serial_8250.h> |
@@ -18,7 +17,6 @@ | |||
18 | #include <asm/mach/map.h> | 17 | #include <asm/mach/map.h> |
19 | 18 | ||
20 | #include <mach/dm644x.h> | 19 | #include <mach/dm644x.h> |
21 | #include <mach/clock.h> | ||
22 | #include <mach/cputype.h> | 20 | #include <mach/cputype.h> |
23 | #include <mach/edma.h> | 21 | #include <mach/edma.h> |
24 | #include <mach/irqs.h> | 22 | #include <mach/irqs.h> |
@@ -370,6 +368,11 @@ MUX_CFG(DM644X, ATAEN_DISABLE, 0, 17, 1, 0, true) | |||
370 | MUX_CFG(DM644X, HPIEN_DISABLE, 0, 29, 1, 0, true) | 368 | MUX_CFG(DM644X, HPIEN_DISABLE, 0, 29, 1, 0, true) |
371 | 369 | ||
372 | MUX_CFG(DM644X, AEAW, 0, 0, 31, 31, true) | 370 | MUX_CFG(DM644X, AEAW, 0, 0, 31, 31, true) |
371 | MUX_CFG(DM644X, AEAW0, 0, 0, 1, 0, true) | ||
372 | MUX_CFG(DM644X, AEAW1, 0, 1, 1, 0, true) | ||
373 | MUX_CFG(DM644X, AEAW2, 0, 2, 1, 0, true) | ||
374 | MUX_CFG(DM644X, AEAW3, 0, 3, 1, 0, true) | ||
375 | MUX_CFG(DM644X, AEAW4, 0, 4, 1, 0, true) | ||
373 | 376 | ||
374 | MUX_CFG(DM644X, MSTK, 1, 9, 1, 0, false) | 377 | MUX_CFG(DM644X, MSTK, 1, 9, 1, 0, false) |
375 | 378 | ||
diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c index 0976049c7b3b..829a44bcf799 100644 --- a/arch/arm/mach-davinci/dm646x.c +++ b/arch/arm/mach-davinci/dm646x.c | |||
@@ -8,7 +8,6 @@ | |||
8 | * is licensed "as is" without any warranty of any kind, whether express | 8 | * is licensed "as is" without any warranty of any kind, whether express |
9 | * or implied. | 9 | * or implied. |
10 | */ | 10 | */ |
11 | #include <linux/kernel.h> | ||
12 | #include <linux/init.h> | 11 | #include <linux/init.h> |
13 | #include <linux/clk.h> | 12 | #include <linux/clk.h> |
14 | #include <linux/serial_8250.h> | 13 | #include <linux/serial_8250.h> |
@@ -18,7 +17,6 @@ | |||
18 | #include <asm/mach/map.h> | 17 | #include <asm/mach/map.h> |
19 | 18 | ||
20 | #include <mach/dm646x.h> | 19 | #include <mach/dm646x.h> |
21 | #include <mach/clock.h> | ||
22 | #include <mach/cputype.h> | 20 | #include <mach/cputype.h> |
23 | #include <mach/edma.h> | 21 | #include <mach/edma.h> |
24 | #include <mach/irqs.h> | 22 | #include <mach/irqs.h> |
@@ -789,7 +787,14 @@ static struct davinci_id dm646x_ids[] = { | |||
789 | .part_no = 0xb770, | 787 | .part_no = 0xb770, |
790 | .manufacturer = 0x017, | 788 | .manufacturer = 0x017, |
791 | .cpu_id = DAVINCI_CPU_ID_DM6467, | 789 | .cpu_id = DAVINCI_CPU_ID_DM6467, |
792 | .name = "dm6467", | 790 | .name = "dm6467_rev1.x", |
791 | }, | ||
792 | { | ||
793 | .variant = 0x1, | ||
794 | .part_no = 0xb770, | ||
795 | .manufacturer = 0x017, | ||
796 | .cpu_id = DAVINCI_CPU_ID_DM6467, | ||
797 | .name = "dm6467_rev3.x", | ||
793 | }, | 798 | }, |
794 | }; | 799 | }; |
795 | 800 | ||
diff --git a/arch/arm/mach-davinci/dma.c b/arch/arm/mach-davinci/dma.c index f2e57d272958..648fbb760ae1 100644 --- a/arch/arm/mach-davinci/dma.c +++ b/arch/arm/mach-davinci/dma.c | |||
@@ -18,22 +18,13 @@ | |||
18 | * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. | 18 | * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
19 | */ | 19 | */ |
20 | #include <linux/kernel.h> | 20 | #include <linux/kernel.h> |
21 | #include <linux/sched.h> | ||
22 | #include <linux/init.h> | 21 | #include <linux/init.h> |
23 | #include <linux/module.h> | 22 | #include <linux/module.h> |
24 | #include <linux/interrupt.h> | 23 | #include <linux/interrupt.h> |
25 | #include <linux/platform_device.h> | 24 | #include <linux/platform_device.h> |
26 | #include <linux/spinlock.h> | ||
27 | #include <linux/compiler.h> | ||
28 | #include <linux/io.h> | 25 | #include <linux/io.h> |
29 | 26 | ||
30 | #include <mach/cputype.h> | ||
31 | #include <mach/memory.h> | ||
32 | #include <mach/hardware.h> | ||
33 | #include <mach/irqs.h> | ||
34 | #include <mach/edma.h> | 27 | #include <mach/edma.h> |
35 | #include <mach/mux.h> | ||
36 | |||
37 | 28 | ||
38 | /* Offsets matching "struct edmacc_param" */ | 29 | /* Offsets matching "struct edmacc_param" */ |
39 | #define PARM_OPT 0x00 | 30 | #define PARM_OPT 0x00 |
@@ -509,43 +500,59 @@ static irqreturn_t dma_tc1err_handler(int irq, void *data) | |||
509 | return IRQ_HANDLED; | 500 | return IRQ_HANDLED; |
510 | } | 501 | } |
511 | 502 | ||
512 | static int reserve_contiguous_params(int ctlr, unsigned int id, | 503 | static int reserve_contiguous_slots(int ctlr, unsigned int id, |
513 | unsigned int num_params, | 504 | unsigned int num_slots, |
514 | unsigned int start_param) | 505 | unsigned int start_slot) |
515 | { | 506 | { |
516 | int i, j; | 507 | int i, j; |
517 | unsigned int count = num_params; | 508 | unsigned int count = num_slots; |
509 | int stop_slot = start_slot; | ||
510 | DECLARE_BITMAP(tmp_inuse, EDMA_MAX_PARAMENTRY); | ||
518 | 511 | ||
519 | for (i = start_param; i < edma_info[ctlr]->num_slots; ++i) { | 512 | for (i = start_slot; i < edma_info[ctlr]->num_slots; ++i) { |
520 | j = EDMA_CHAN_SLOT(i); | 513 | j = EDMA_CHAN_SLOT(i); |
521 | if (!test_and_set_bit(j, edma_info[ctlr]->edma_inuse)) | 514 | if (!test_and_set_bit(j, edma_info[ctlr]->edma_inuse)) { |
515 | /* Record our current beginning slot */ | ||
516 | if (count == num_slots) | ||
517 | stop_slot = i; | ||
518 | |||
522 | count--; | 519 | count--; |
520 | set_bit(j, tmp_inuse); | ||
521 | |||
523 | if (count == 0) | 522 | if (count == 0) |
524 | break; | 523 | break; |
525 | else if (id == EDMA_CONT_PARAMS_FIXED_EXACT) | 524 | } else { |
526 | break; | 525 | clear_bit(j, tmp_inuse); |
527 | else | 526 | |
528 | count = num_params; | 527 | if (id == EDMA_CONT_PARAMS_FIXED_EXACT) { |
528 | stop_slot = i; | ||
529 | break; | ||
530 | } else | ||
531 | count = num_slots; | ||
532 | } | ||
529 | } | 533 | } |
530 | 534 | ||
531 | /* | 535 | /* |
532 | * We have to clear any bits that we set | 536 | * We have to clear any bits that we set |
533 | * if we run out parameter RAMs, i.e we do find a set | 537 | * if we run out parameter RAM slots, i.e we do find a set |
534 | * of contiguous parameter RAMs but do not find the exact number | 538 | * of contiguous parameter RAM slots but do not find the exact number |
535 | * requested as we may reach the total number of parameter RAMs | 539 | * requested as we may reach the total number of parameter RAM slots |
536 | */ | 540 | */ |
537 | if (count) { | 541 | if (i == edma_info[ctlr]->num_slots) |
538 | for (j = i - num_params + count + 1; j <= i ; ++j) | 542 | stop_slot = i; |
543 | |||
544 | for (j = start_slot; j < stop_slot; j++) | ||
545 | if (test_bit(j, tmp_inuse)) | ||
539 | clear_bit(j, edma_info[ctlr]->edma_inuse); | 546 | clear_bit(j, edma_info[ctlr]->edma_inuse); |
540 | 547 | ||
548 | if (count) | ||
541 | return -EBUSY; | 549 | return -EBUSY; |
542 | } | ||
543 | 550 | ||
544 | for (j = i - num_params + 1; j <= i; ++j) | 551 | for (j = i - num_slots + 1; j <= i; ++j) |
545 | memcpy_toio(edmacc_regs_base[ctlr] + PARM_OFFSET(j), | 552 | memcpy_toio(edmacc_regs_base[ctlr] + PARM_OFFSET(j), |
546 | &dummy_paramset, PARM_SIZE); | 553 | &dummy_paramset, PARM_SIZE); |
547 | 554 | ||
548 | return EDMA_CTLR_CHAN(ctlr, i - num_params + 1); | 555 | return EDMA_CTLR_CHAN(ctlr, i - num_slots + 1); |
549 | } | 556 | } |
550 | 557 | ||
551 | /*-----------------------------------------------------------------------*/ | 558 | /*-----------------------------------------------------------------------*/ |
@@ -743,26 +750,27 @@ EXPORT_SYMBOL(edma_free_slot); | |||
743 | /** | 750 | /** |
744 | * edma_alloc_cont_slots- alloc contiguous parameter RAM slots | 751 | * edma_alloc_cont_slots- alloc contiguous parameter RAM slots |
745 | * The API will return the starting point of a set of | 752 | * The API will return the starting point of a set of |
746 | * contiguous PARAM's that have been requested | 753 | * contiguous parameter RAM slots that have been requested |
747 | * | 754 | * |
748 | * @id: can only be EDMA_CONT_PARAMS_ANY or EDMA_CONT_PARAMS_FIXED_EXACT | 755 | * @id: can only be EDMA_CONT_PARAMS_ANY or EDMA_CONT_PARAMS_FIXED_EXACT |
749 | * or EDMA_CONT_PARAMS_FIXED_NOT_EXACT | 756 | * or EDMA_CONT_PARAMS_FIXED_NOT_EXACT |
750 | * @count: number of contiguous Paramter RAM's | 757 | * @count: number of contiguous Paramter RAM slots |
751 | * @param - the start value of Parameter RAM that should be passed if id | 758 | * @slot - the start value of Parameter RAM slot that should be passed if id |
752 | * is EDMA_CONT_PARAMS_FIXED_EXACT or EDMA_CONT_PARAMS_FIXED_NOT_EXACT | 759 | * is EDMA_CONT_PARAMS_FIXED_EXACT or EDMA_CONT_PARAMS_FIXED_NOT_EXACT |
753 | * | 760 | * |
754 | * If id is EDMA_CONT_PARAMS_ANY then the API starts looking for a set of | 761 | * If id is EDMA_CONT_PARAMS_ANY then the API starts looking for a set of |
755 | * contiguous Parameter RAMs from parameter RAM 64 in the case of DaVinci SOCs | 762 | * contiguous Parameter RAM slots from parameter RAM 64 in the case of |
756 | * and 32 in the case of Primus | 763 | * DaVinci SOCs and 32 in the case of DA8xx SOCs. |
757 | * | 764 | * |
758 | * If id is EDMA_CONT_PARAMS_FIXED_EXACT then the API starts looking for a | 765 | * If id is EDMA_CONT_PARAMS_FIXED_EXACT then the API starts looking for a |
759 | * set of contiguous parameter RAMs from the "param" that is passed as an | 766 | * set of contiguous parameter RAM slots from the "slot" that is passed as an |
760 | * argument to the API. | 767 | * argument to the API. |
761 | * | 768 | * |
762 | * If id is EDMA_CONT_PARAMS_FIXED_NOT_EXACT then the API initially tries | 769 | * If id is EDMA_CONT_PARAMS_FIXED_NOT_EXACT then the API initially tries |
763 | * starts looking for a set of contiguous parameter RAMs from the "param" | 770 | * starts looking for a set of contiguous parameter RAMs from the "slot" |
764 | * that is passed as an argument to the API. On failure the API will try to | 771 | * that is passed as an argument to the API. On failure the API will try to |
765 | * find a set of contiguous Parameter RAMs in the remaining Parameter RAMs | 772 | * find a set of contiguous Parameter RAM slots from the remaining Parameter |
773 | * RAM slots | ||
766 | */ | 774 | */ |
767 | int edma_alloc_cont_slots(unsigned ctlr, unsigned int id, int slot, int count) | 775 | int edma_alloc_cont_slots(unsigned ctlr, unsigned int id, int slot, int count) |
768 | { | 776 | { |
@@ -771,12 +779,13 @@ int edma_alloc_cont_slots(unsigned ctlr, unsigned int id, int slot, int count) | |||
771 | * the number of channels and lesser than the total number | 779 | * the number of channels and lesser than the total number |
772 | * of slots | 780 | * of slots |
773 | */ | 781 | */ |
774 | if (slot < edma_info[ctlr]->num_channels || | 782 | if ((id != EDMA_CONT_PARAMS_ANY) && |
775 | slot >= edma_info[ctlr]->num_slots) | 783 | (slot < edma_info[ctlr]->num_channels || |
784 | slot >= edma_info[ctlr]->num_slots)) | ||
776 | return -EINVAL; | 785 | return -EINVAL; |
777 | 786 | ||
778 | /* | 787 | /* |
779 | * The number of parameter RAMs requested cannot be less than 1 | 788 | * The number of parameter RAM slots requested cannot be less than 1 |
780 | * and cannot be more than the number of slots minus the number of | 789 | * and cannot be more than the number of slots minus the number of |
781 | * channels | 790 | * channels |
782 | */ | 791 | */ |
@@ -786,11 +795,11 @@ int edma_alloc_cont_slots(unsigned ctlr, unsigned int id, int slot, int count) | |||
786 | 795 | ||
787 | switch (id) { | 796 | switch (id) { |
788 | case EDMA_CONT_PARAMS_ANY: | 797 | case EDMA_CONT_PARAMS_ANY: |
789 | return reserve_contiguous_params(ctlr, id, count, | 798 | return reserve_contiguous_slots(ctlr, id, count, |
790 | edma_info[ctlr]->num_channels); | 799 | edma_info[ctlr]->num_channels); |
791 | case EDMA_CONT_PARAMS_FIXED_EXACT: | 800 | case EDMA_CONT_PARAMS_FIXED_EXACT: |
792 | case EDMA_CONT_PARAMS_FIXED_NOT_EXACT: | 801 | case EDMA_CONT_PARAMS_FIXED_NOT_EXACT: |
793 | return reserve_contiguous_params(ctlr, id, count, slot); | 802 | return reserve_contiguous_slots(ctlr, id, count, slot); |
794 | default: | 803 | default: |
795 | return -EINVAL; | 804 | return -EINVAL; |
796 | } | 805 | } |
@@ -799,21 +808,21 @@ int edma_alloc_cont_slots(unsigned ctlr, unsigned int id, int slot, int count) | |||
799 | EXPORT_SYMBOL(edma_alloc_cont_slots); | 808 | EXPORT_SYMBOL(edma_alloc_cont_slots); |
800 | 809 | ||
801 | /** | 810 | /** |
802 | * edma_free_cont_slots - deallocate DMA parameter RAMs | 811 | * edma_free_cont_slots - deallocate DMA parameter RAM slots |
803 | * @slot: first parameter RAM of a set of parameter RAMs to be freed | 812 | * @slot: first parameter RAM of a set of parameter RAM slots to be freed |
804 | * @count: the number of contiguous parameter RAMs to be freed | 813 | * @count: the number of contiguous parameter RAM slots to be freed |
805 | * | 814 | * |
806 | * This deallocates the parameter RAM slots allocated by | 815 | * This deallocates the parameter RAM slots allocated by |
807 | * edma_alloc_cont_slots. | 816 | * edma_alloc_cont_slots. |
808 | * Callers/applications need to keep track of sets of contiguous | 817 | * Callers/applications need to keep track of sets of contiguous |
809 | * parameter RAMs that have been allocated using the edma_alloc_cont_slots | 818 | * parameter RAM slots that have been allocated using the edma_alloc_cont_slots |
810 | * API. | 819 | * API. |
811 | * Callers are responsible for ensuring the slots are inactive, and will | 820 | * Callers are responsible for ensuring the slots are inactive, and will |
812 | * not be activated. | 821 | * not be activated. |
813 | */ | 822 | */ |
814 | int edma_free_cont_slots(unsigned slot, int count) | 823 | int edma_free_cont_slots(unsigned slot, int count) |
815 | { | 824 | { |
816 | unsigned ctlr; | 825 | unsigned ctlr, slot_to_free; |
817 | int i; | 826 | int i; |
818 | 827 | ||
819 | ctlr = EDMA_CTLR(slot); | 828 | ctlr = EDMA_CTLR(slot); |
@@ -826,11 +835,11 @@ int edma_free_cont_slots(unsigned slot, int count) | |||
826 | 835 | ||
827 | for (i = slot; i < slot + count; ++i) { | 836 | for (i = slot; i < slot + count; ++i) { |
828 | ctlr = EDMA_CTLR(i); | 837 | ctlr = EDMA_CTLR(i); |
829 | slot = EDMA_CHAN_SLOT(i); | 838 | slot_to_free = EDMA_CHAN_SLOT(i); |
830 | 839 | ||
831 | memcpy_toio(edmacc_regs_base[ctlr] + PARM_OFFSET(slot), | 840 | memcpy_toio(edmacc_regs_base[ctlr] + PARM_OFFSET(slot_to_free), |
832 | &dummy_paramset, PARM_SIZE); | 841 | &dummy_paramset, PARM_SIZE); |
833 | clear_bit(slot, edma_info[ctlr]->edma_inuse); | 842 | clear_bit(slot_to_free, edma_info[ctlr]->edma_inuse); |
834 | } | 843 | } |
835 | 844 | ||
836 | return 0; | 845 | return 0; |
diff --git a/arch/arm/mach-davinci/gpio.c b/arch/arm/mach-davinci/gpio.c index f6ea9db11f41..744755b53236 100644 --- a/arch/arm/mach-davinci/gpio.c +++ b/arch/arm/mach-davinci/gpio.c | |||
@@ -12,23 +12,14 @@ | |||
12 | 12 | ||
13 | #include <linux/errno.h> | 13 | #include <linux/errno.h> |
14 | #include <linux/kernel.h> | 14 | #include <linux/kernel.h> |
15 | #include <linux/list.h> | ||
16 | #include <linux/module.h> | ||
17 | #include <linux/clk.h> | 15 | #include <linux/clk.h> |
18 | #include <linux/err.h> | 16 | #include <linux/err.h> |
19 | #include <linux/io.h> | 17 | #include <linux/io.h> |
20 | #include <linux/irq.h> | ||
21 | #include <linux/bitops.h> | ||
22 | 18 | ||
23 | #include <mach/cputype.h> | ||
24 | #include <mach/irqs.h> | ||
25 | #include <mach/hardware.h> | ||
26 | #include <mach/common.h> | ||
27 | #include <mach/gpio.h> | 19 | #include <mach/gpio.h> |
28 | 20 | ||
29 | #include <asm/mach/irq.h> | 21 | #include <asm/mach/irq.h> |
30 | 22 | ||
31 | |||
32 | static DEFINE_SPINLOCK(gpio_lock); | 23 | static DEFINE_SPINLOCK(gpio_lock); |
33 | 24 | ||
34 | struct davinci_gpio { | 25 | struct davinci_gpio { |
diff --git a/arch/arm/mach-davinci/include/mach/asp.h b/arch/arm/mach-davinci/include/mach/asp.h index e07f70ed7c53..834725f1e81d 100644 --- a/arch/arm/mach-davinci/include/mach/asp.h +++ b/arch/arm/mach-davinci/include/mach/asp.h | |||
@@ -11,6 +11,9 @@ | |||
11 | #define DAVINCI_ASP0_BASE 0x01E02000 | 11 | #define DAVINCI_ASP0_BASE 0x01E02000 |
12 | #define DAVINCI_ASP1_BASE 0x01E04000 | 12 | #define DAVINCI_ASP1_BASE 0x01E04000 |
13 | 13 | ||
14 | /* Bases of dm365 register banks */ | ||
15 | #define DAVINCI_DM365_ASP0_BASE 0x01D02000 | ||
16 | |||
14 | /* Bases of dm646x register banks */ | 17 | /* Bases of dm646x register banks */ |
15 | #define DAVINCI_DM646X_MCASP0_REG_BASE 0x01D01000 | 18 | #define DAVINCI_DM646X_MCASP0_REG_BASE 0x01D01000 |
16 | #define DAVINCI_DM646X_MCASP1_REG_BASE 0x01D01800 | 19 | #define DAVINCI_DM646X_MCASP1_REG_BASE 0x01D01800 |
diff --git a/arch/arm/mach-davinci/include/mach/common.h b/arch/arm/mach-davinci/include/mach/common.h index 1fd3917cae4e..6ca2c9a0a482 100644 --- a/arch/arm/mach-davinci/include/mach/common.h +++ b/arch/arm/mach-davinci/include/mach/common.h | |||
@@ -20,12 +20,6 @@ extern void davinci_irq_init(void); | |||
20 | extern void __iomem *davinci_intc_base; | 20 | extern void __iomem *davinci_intc_base; |
21 | extern int davinci_intc_type; | 21 | extern int davinci_intc_type; |
22 | 22 | ||
23 | /* parameters describe VBUS sourcing for host mode */ | ||
24 | extern void setup_usb(unsigned mA, unsigned potpgt_msec); | ||
25 | |||
26 | /* parameters describe VBUS sourcing for host mode */ | ||
27 | extern void setup_usb(unsigned mA, unsigned potpgt_msec); | ||
28 | |||
29 | struct davinci_timer_instance { | 23 | struct davinci_timer_instance { |
30 | void __iomem *base; | 24 | void __iomem *base; |
31 | u32 bottom_irq; | 25 | u32 bottom_irq; |
diff --git a/arch/arm/mach-davinci/include/mach/cpufreq.h b/arch/arm/mach-davinci/include/mach/cpufreq.h new file mode 100644 index 000000000000..3c089cfb6cd6 --- /dev/null +++ b/arch/arm/mach-davinci/include/mach/cpufreq.h | |||
@@ -0,0 +1,26 @@ | |||
1 | /* | ||
2 | * TI DaVinci CPUFreq platform support. | ||
3 | * | ||
4 | * Copyright (C) 2009 Texas Instruments, Inc. http://www.ti.com/ | ||
5 | * | ||
6 | * This program is free software; you can redistribute it and/or | ||
7 | * modify it under the terms of the GNU General Public License as | ||
8 | * published by the Free Software Foundation version 2. | ||
9 | * | ||
10 | * This program is distributed "as is" WITHOUT ANY WARRANTY of any | ||
11 | * kind, whether express or implied; without even the implied warranty | ||
12 | * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | ||
13 | * GNU General Public License for more details. | ||
14 | */ | ||
15 | #ifndef _MACH_DAVINCI_CPUFREQ_H | ||
16 | #define _MACH_DAVINCI_CPUFREQ_H | ||
17 | |||
18 | #include <linux/cpufreq.h> | ||
19 | |||
20 | struct davinci_cpufreq_config { | ||
21 | struct cpufreq_frequency_table *freq_table; | ||
22 | int (*set_voltage) (unsigned int index); | ||
23 | int (*init) (void); | ||
24 | }; | ||
25 | |||
26 | #endif | ||
diff --git a/arch/arm/mach-davinci/include/mach/cpuidle.h b/arch/arm/mach-davinci/include/mach/cpuidle.h new file mode 100644 index 000000000000..cbfc6a9c81b4 --- /dev/null +++ b/arch/arm/mach-davinci/include/mach/cpuidle.h | |||
@@ -0,0 +1,17 @@ | |||
1 | /* | ||
2 | * TI DaVinci cpuidle platform support | ||
3 | * | ||
4 | * 2009 (C) Texas Instruments, Inc. http://www.ti.com/ | ||
5 | * | ||
6 | * This file is licensed under the terms of the GNU General Public License | ||
7 | * version 2. This program is licensed "as is" without any warranty of any | ||
8 | * kind, whether express or implied. | ||
9 | */ | ||
10 | #ifndef _MACH_DAVINCI_CPUIDLE_H | ||
11 | #define _MACH_DAVINCI_CPUIDLE_H | ||
12 | |||
13 | struct davinci_cpuidle_config { | ||
14 | u32 ddr2_pdown; | ||
15 | }; | ||
16 | |||
17 | #endif | ||
diff --git a/arch/arm/mach-davinci/include/mach/da8xx.h b/arch/arm/mach-davinci/include/mach/da8xx.h index d4095d0572c6..90704910d343 100644 --- a/arch/arm/mach-davinci/include/mach/da8xx.h +++ b/arch/arm/mach-davinci/include/mach/da8xx.h | |||
@@ -11,12 +11,17 @@ | |||
11 | #ifndef __ASM_ARCH_DAVINCI_DA8XX_H | 11 | #ifndef __ASM_ARCH_DAVINCI_DA8XX_H |
12 | #define __ASM_ARCH_DAVINCI_DA8XX_H | 12 | #define __ASM_ARCH_DAVINCI_DA8XX_H |
13 | 13 | ||
14 | #include <video/da8xx-fb.h> | ||
15 | |||
14 | #include <mach/serial.h> | 16 | #include <mach/serial.h> |
15 | #include <mach/edma.h> | 17 | #include <mach/edma.h> |
16 | #include <mach/i2c.h> | 18 | #include <mach/i2c.h> |
17 | #include <mach/emac.h> | 19 | #include <mach/emac.h> |
18 | #include <mach/asp.h> | 20 | #include <mach/asp.h> |
19 | #include <mach/mmc.h> | 21 | #include <mach/mmc.h> |
22 | #include <mach/usb.h> | ||
23 | |||
24 | extern void __iomem *da8xx_syscfg_base; | ||
20 | 25 | ||
21 | /* | 26 | /* |
22 | * The cp_intc interrupt controller for the da8xx isn't in the same | 27 | * The cp_intc interrupt controller for the da8xx isn't in the same |
@@ -29,11 +34,15 @@ | |||
29 | #define DA8XX_CP_INTC_SIZE SZ_8K | 34 | #define DA8XX_CP_INTC_SIZE SZ_8K |
30 | #define DA8XX_CP_INTC_VIRT (IO_VIRT - DA8XX_CP_INTC_SIZE - SZ_4K) | 35 | #define DA8XX_CP_INTC_VIRT (IO_VIRT - DA8XX_CP_INTC_SIZE - SZ_4K) |
31 | 36 | ||
32 | #define DA8XX_BOOT_CFG_BASE (IO_PHYS + 0x14000) | 37 | #define DA8XX_SYSCFG_BASE (IO_PHYS + 0x14000) |
38 | #define DA8XX_SYSCFG_VIRT(x) (da8xx_syscfg_base + (x)) | ||
39 | #define DA8XX_JTAG_ID_REG 0x18 | ||
40 | #define DA8XX_CFGCHIP0_REG 0x17c | ||
41 | #define DA8XX_CFGCHIP2_REG 0x184 | ||
42 | #define DA8XX_CFGCHIP3_REG 0x188 | ||
33 | 43 | ||
34 | #define DA8XX_PSC0_BASE 0x01c10000 | 44 | #define DA8XX_PSC0_BASE 0x01c10000 |
35 | #define DA8XX_PLL0_BASE 0x01c11000 | 45 | #define DA8XX_PLL0_BASE 0x01c11000 |
36 | #define DA8XX_JTAG_ID_REG 0x01c14018 | ||
37 | #define DA8XX_TIMER64P0_BASE 0x01c20000 | 46 | #define DA8XX_TIMER64P0_BASE 0x01c20000 |
38 | #define DA8XX_TIMER64P1_BASE 0x01c21000 | 47 | #define DA8XX_TIMER64P1_BASE 0x01c21000 |
39 | #define DA8XX_GPIO_BASE 0x01e26000 | 48 | #define DA8XX_GPIO_BASE 0x01e26000 |
@@ -43,6 +52,7 @@ | |||
43 | #define DA8XX_AEMIF_CS2_BASE 0x60000000 | 52 | #define DA8XX_AEMIF_CS2_BASE 0x60000000 |
44 | #define DA8XX_AEMIF_CS3_BASE 0x62000000 | 53 | #define DA8XX_AEMIF_CS3_BASE 0x62000000 |
45 | #define DA8XX_AEMIF_CTL_BASE 0x68000000 | 54 | #define DA8XX_AEMIF_CTL_BASE 0x68000000 |
55 | #define DA8XX_DDR2_CTL_BASE 0xb0000000 | ||
46 | 56 | ||
47 | #define PINMUX0 0x00 | 57 | #define PINMUX0 0x00 |
48 | #define PINMUX1 0x04 | 58 | #define PINMUX1 0x04 |
@@ -71,13 +81,20 @@ void __init da850_init(void); | |||
71 | int da8xx_register_edma(void); | 81 | int da8xx_register_edma(void); |
72 | int da8xx_register_i2c(int instance, struct davinci_i2c_platform_data *pdata); | 82 | int da8xx_register_i2c(int instance, struct davinci_i2c_platform_data *pdata); |
73 | int da8xx_register_watchdog(void); | 83 | int da8xx_register_watchdog(void); |
84 | int da8xx_register_usb20(unsigned mA, unsigned potpgt); | ||
85 | int da8xx_register_usb11(struct da8xx_ohci_root_hub *pdata); | ||
74 | int da8xx_register_emac(void); | 86 | int da8xx_register_emac(void); |
75 | int da8xx_register_lcdc(void); | 87 | int da8xx_register_lcdc(struct da8xx_lcdc_platform_data *pdata); |
76 | int da8xx_register_mmcsd0(struct davinci_mmc_config *config); | 88 | int da8xx_register_mmcsd0(struct davinci_mmc_config *config); |
77 | void __init da8xx_init_mcasp(int id, struct snd_platform_data *pdata); | 89 | void __init da8xx_register_mcasp(int id, struct snd_platform_data *pdata); |
90 | int da8xx_register_rtc(void); | ||
91 | int da850_register_cpufreq(void); | ||
92 | int da8xx_register_cpuidle(void); | ||
78 | 93 | ||
79 | extern struct platform_device da8xx_serial_device; | 94 | extern struct platform_device da8xx_serial_device; |
80 | extern struct emac_platform_data da8xx_emac_pdata; | 95 | extern struct emac_platform_data da8xx_emac_pdata; |
96 | extern struct da8xx_lcdc_platform_data sharp_lcd035q3dg01_pdata; | ||
97 | extern struct da8xx_lcdc_platform_data sharp_lk043t1dg01_pdata; | ||
81 | 98 | ||
82 | extern const short da830_emif25_pins[]; | 99 | extern const short da830_emif25_pins[]; |
83 | extern const short da830_spi0_pins[]; | 100 | extern const short da830_spi0_pins[]; |
@@ -110,6 +127,7 @@ extern const short da850_uart2_pins[]; | |||
110 | extern const short da850_i2c0_pins[]; | 127 | extern const short da850_i2c0_pins[]; |
111 | extern const short da850_i2c1_pins[]; | 128 | extern const short da850_i2c1_pins[]; |
112 | extern const short da850_cpgmac_pins[]; | 129 | extern const short da850_cpgmac_pins[]; |
130 | extern const short da850_rmii_pins[]; | ||
113 | extern const short da850_mcasp_pins[]; | 131 | extern const short da850_mcasp_pins[]; |
114 | extern const short da850_lcdcntl_pins[]; | 132 | extern const short da850_lcdcntl_pins[]; |
115 | extern const short da850_mmcsd0_pins[]; | 133 | extern const short da850_mmcsd0_pins[]; |
diff --git a/arch/arm/mach-davinci/include/mach/dm365.h b/arch/arm/mach-davinci/include/mach/dm365.h index 09db4343bb4c..f1710a30e7ba 100644 --- a/arch/arm/mach-davinci/include/mach/dm365.h +++ b/arch/arm/mach-davinci/include/mach/dm365.h | |||
@@ -16,6 +16,8 @@ | |||
16 | #include <linux/platform_device.h> | 16 | #include <linux/platform_device.h> |
17 | #include <mach/hardware.h> | 17 | #include <mach/hardware.h> |
18 | #include <mach/emac.h> | 18 | #include <mach/emac.h> |
19 | #include <mach/asp.h> | ||
20 | #include <mach/keyscan.h> | ||
19 | 21 | ||
20 | #define DM365_EMAC_BASE (0x01D07000) | 22 | #define DM365_EMAC_BASE (0x01D07000) |
21 | #define DM365_EMAC_CNTRL_OFFSET (0x0000) | 23 | #define DM365_EMAC_CNTRL_OFFSET (0x0000) |
@@ -24,6 +26,14 @@ | |||
24 | #define DM365_EMAC_MDIO_OFFSET (0x4000) | 26 | #define DM365_EMAC_MDIO_OFFSET (0x4000) |
25 | #define DM365_EMAC_CNTRL_RAM_SIZE (0x2000) | 27 | #define DM365_EMAC_CNTRL_RAM_SIZE (0x2000) |
26 | 28 | ||
29 | /* Base of key scan register bank */ | ||
30 | #define DM365_KEYSCAN_BASE (0x01C69400) | ||
31 | |||
32 | #define DM365_RTC_BASE (0x01C69000) | ||
33 | |||
27 | void __init dm365_init(void); | 34 | void __init dm365_init(void); |
35 | void __init dm365_init_asp(struct snd_platform_data *pdata); | ||
36 | void __init dm365_init_ks(struct davinci_ks_platform_data *pdata); | ||
37 | void __init dm365_init_rtc(void); | ||
28 | 38 | ||
29 | #endif /* __ASM_ARCH_DM365_H */ | 39 | #endif /* __ASM_ARCH_DM365_H */ |
diff --git a/arch/arm/mach-davinci/include/mach/dm644x.h b/arch/arm/mach-davinci/include/mach/dm644x.h index 0efb73852c2c..44e8f0fae9ea 100644 --- a/arch/arm/mach-davinci/include/mach/dm644x.h +++ b/arch/arm/mach-davinci/include/mach/dm644x.h | |||
@@ -22,7 +22,6 @@ | |||
22 | #ifndef __ASM_ARCH_DM644X_H | 22 | #ifndef __ASM_ARCH_DM644X_H |
23 | #define __ASM_ARCH_DM644X_H | 23 | #define __ASM_ARCH_DM644X_H |
24 | 24 | ||
25 | #include <linux/platform_device.h> | ||
26 | #include <mach/hardware.h> | 25 | #include <mach/hardware.h> |
27 | #include <mach/emac.h> | 26 | #include <mach/emac.h> |
28 | #include <mach/asp.h> | 27 | #include <mach/asp.h> |
diff --git a/arch/arm/mach-davinci/include/mach/irqs.h b/arch/arm/mach-davinci/include/mach/irqs.h index 3c918a772619..354af71798dc 100644 --- a/arch/arm/mach-davinci/include/mach/irqs.h +++ b/arch/arm/mach-davinci/include/mach/irqs.h | |||
@@ -217,6 +217,7 @@ | |||
217 | #define IRQ_DM365_SDIOINT0 23 | 217 | #define IRQ_DM365_SDIOINT0 23 |
218 | #define IRQ_DM365_MMCINT1 27 | 218 | #define IRQ_DM365_MMCINT1 27 |
219 | #define IRQ_DM365_PWMINT3 28 | 219 | #define IRQ_DM365_PWMINT3 28 |
220 | #define IRQ_DM365_RTCINT 29 | ||
220 | #define IRQ_DM365_SDIOINT1 31 | 221 | #define IRQ_DM365_SDIOINT1 31 |
221 | #define IRQ_DM365_SPIINT0_0 42 | 222 | #define IRQ_DM365_SPIINT0_0 42 |
222 | #define IRQ_DM365_SPIINT3_0 43 | 223 | #define IRQ_DM365_SPIINT3_0 43 |
diff --git a/arch/arm/mach-davinci/include/mach/mux.h b/arch/arm/mach-davinci/include/mach/mux.h index bb84893a4e83..b60c693985ff 100644 --- a/arch/arm/mach-davinci/include/mach/mux.h +++ b/arch/arm/mach-davinci/include/mach/mux.h | |||
@@ -40,6 +40,11 @@ enum davinci_dm644x_index { | |||
40 | 40 | ||
41 | /* AEAW functions */ | 41 | /* AEAW functions */ |
42 | DM644X_AEAW, | 42 | DM644X_AEAW, |
43 | DM644X_AEAW0, | ||
44 | DM644X_AEAW1, | ||
45 | DM644X_AEAW2, | ||
46 | DM644X_AEAW3, | ||
47 | DM644X_AEAW4, | ||
43 | 48 | ||
44 | /* Memory Stick */ | 49 | /* Memory Stick */ |
45 | DM644X_MSTK, | 50 | DM644X_MSTK, |
@@ -237,8 +242,8 @@ enum davinci_dm365_index { | |||
237 | DM365_EMAC_MDIO, | 242 | DM365_EMAC_MDIO, |
238 | DM365_EMAC_MDCLK, | 243 | DM365_EMAC_MDCLK, |
239 | 244 | ||
240 | /* Keypad */ | 245 | /* Key Scan */ |
241 | DM365_KEYPAD, | 246 | DM365_KEYSCAN, |
242 | 247 | ||
243 | /* PWM */ | 248 | /* PWM */ |
244 | DM365_PWM0, | 249 | DM365_PWM0, |
@@ -774,6 +779,14 @@ enum davinci_da850_index { | |||
774 | DA850_MII_RXD_0, | 779 | DA850_MII_RXD_0, |
775 | DA850_MDIO_CLK, | 780 | DA850_MDIO_CLK, |
776 | DA850_MDIO_D, | 781 | DA850_MDIO_D, |
782 | DA850_RMII_TXD_0, | ||
783 | DA850_RMII_TXD_1, | ||
784 | DA850_RMII_TXEN, | ||
785 | DA850_RMII_CRS_DV, | ||
786 | DA850_RMII_RXD_0, | ||
787 | DA850_RMII_RXD_1, | ||
788 | DA850_RMII_RXER, | ||
789 | DA850_RMII_MHZ_50_CLK, | ||
777 | 790 | ||
778 | /* McASP function */ | 791 | /* McASP function */ |
779 | DA850_ACLKR, | 792 | DA850_ACLKR, |
@@ -881,8 +894,9 @@ enum davinci_da850_index { | |||
881 | DA850_NEMA_CS_2, | 894 | DA850_NEMA_CS_2, |
882 | 895 | ||
883 | /* GPIO function */ | 896 | /* GPIO function */ |
897 | DA850_GPIO2_6, | ||
898 | DA850_GPIO2_8, | ||
884 | DA850_GPIO2_15, | 899 | DA850_GPIO2_15, |
885 | DA850_GPIO8_10, | ||
886 | DA850_GPIO4_0, | 900 | DA850_GPIO4_0, |
887 | DA850_GPIO4_1, | 901 | DA850_GPIO4_1, |
888 | }; | 902 | }; |
diff --git a/arch/arm/mach-davinci/include/mach/system.h b/arch/arm/mach-davinci/include/mach/system.h index 8e4f10fe1263..5a7d7581b8ce 100644 --- a/arch/arm/mach-davinci/include/mach/system.h +++ b/arch/arm/mach-davinci/include/mach/system.h | |||
@@ -11,9 +11,6 @@ | |||
11 | #ifndef __ASM_ARCH_SYSTEM_H | 11 | #ifndef __ASM_ARCH_SYSTEM_H |
12 | #define __ASM_ARCH_SYSTEM_H | 12 | #define __ASM_ARCH_SYSTEM_H |
13 | 13 | ||
14 | #include <linux/io.h> | ||
15 | #include <mach/hardware.h> | ||
16 | |||
17 | extern void davinci_watchdog_reset(void); | 14 | extern void davinci_watchdog_reset(void); |
18 | 15 | ||
19 | static inline void arch_idle(void) | 16 | static inline void arch_idle(void) |
diff --git a/arch/arm/mach-davinci/include/mach/usb.h b/arch/arm/mach-davinci/include/mach/usb.h new file mode 100644 index 000000000000..e0bc4abe69c2 --- /dev/null +++ b/arch/arm/mach-davinci/include/mach/usb.h | |||
@@ -0,0 +1,59 @@ | |||
1 | /* | ||
2 | * USB related definitions | ||
3 | * | ||
4 | * Copyright (C) 2009 MontaVista Software, Inc. <source@mvista.com> | ||
5 | * | ||
6 | * This file is licensed under the terms of the GNU General Public License | ||
7 | * version 2. This program is licensed "as is" without any warranty of any | ||
8 | * kind, whether express or implied. | ||
9 | */ | ||
10 | |||
11 | #ifndef __ASM_ARCH_USB_H | ||
12 | #define __ASM_ARCH_USB_H | ||
13 | |||
14 | /* DA8xx CFGCHIP2 (USB 2.0 PHY Control) register bits */ | ||
15 | #define CFGCHIP2_PHYCLKGD (1 << 17) | ||
16 | #define CFGCHIP2_VBUSSENSE (1 << 16) | ||
17 | #define CFGCHIP2_RESET (1 << 15) | ||
18 | #define CFGCHIP2_OTGMODE (3 << 13) | ||
19 | #define CFGCHIP2_NO_OVERRIDE (0 << 13) | ||
20 | #define CFGCHIP2_FORCE_HOST (1 << 13) | ||
21 | #define CFGCHIP2_FORCE_DEVICE (2 << 13) | ||
22 | #define CFGCHIP2_FORCE_HOST_VBUS_LOW (3 << 13) | ||
23 | #define CFGCHIP2_USB1PHYCLKMUX (1 << 12) | ||
24 | #define CFGCHIP2_USB2PHYCLKMUX (1 << 11) | ||
25 | #define CFGCHIP2_PHYPWRDN (1 << 10) | ||
26 | #define CFGCHIP2_OTGPWRDN (1 << 9) | ||
27 | #define CFGCHIP2_DATPOL (1 << 8) | ||
28 | #define CFGCHIP2_USB1SUSPENDM (1 << 7) | ||
29 | #define CFGCHIP2_PHY_PLLON (1 << 6) /* override PLL suspend */ | ||
30 | #define CFGCHIP2_SESENDEN (1 << 5) /* Vsess_end comparator */ | ||
31 | #define CFGCHIP2_VBDTCTEN (1 << 4) /* Vbus comparator */ | ||
32 | #define CFGCHIP2_REFFREQ (0xf << 0) | ||
33 | #define CFGCHIP2_REFFREQ_12MHZ (1 << 0) | ||
34 | #define CFGCHIP2_REFFREQ_24MHZ (2 << 0) | ||
35 | #define CFGCHIP2_REFFREQ_48MHZ (3 << 0) | ||
36 | |||
37 | struct da8xx_ohci_root_hub; | ||
38 | |||
39 | typedef void (*da8xx_ocic_handler_t)(struct da8xx_ohci_root_hub *hub, | ||
40 | unsigned port); | ||
41 | |||
42 | /* Passed as the platform data to the OHCI driver */ | ||
43 | struct da8xx_ohci_root_hub { | ||
44 | /* Switch the port power on/off */ | ||
45 | int (*set_power)(unsigned port, int on); | ||
46 | /* Read the port power status */ | ||
47 | int (*get_power)(unsigned port); | ||
48 | /* Read the port over-current indicator */ | ||
49 | int (*get_oci)(unsigned port); | ||
50 | /* Over-current indicator change notification (pass NULL to disable) */ | ||
51 | int (*ocic_notify)(da8xx_ocic_handler_t handler); | ||
52 | |||
53 | /* Time from power on to power good (in 2 ms units) */ | ||
54 | u8 potpgt; | ||
55 | }; | ||
56 | |||
57 | void davinci_setup_usb(unsigned mA, unsigned potpgt_ms); | ||
58 | |||
59 | #endif /* ifndef __ASM_ARCH_USB_H */ | ||
diff --git a/arch/arm/mach-davinci/mux.c b/arch/arm/mach-davinci/mux.c index 898905e48946..f757e83415f3 100644 --- a/arch/arm/mach-davinci/mux.c +++ b/arch/arm/mach-davinci/mux.c | |||
@@ -19,7 +19,6 @@ | |||
19 | #include <linux/module.h> | 19 | #include <linux/module.h> |
20 | #include <linux/spinlock.h> | 20 | #include <linux/spinlock.h> |
21 | 21 | ||
22 | #include <mach/hardware.h> | ||
23 | #include <mach/mux.h> | 22 | #include <mach/mux.h> |
24 | #include <mach/common.h> | 23 | #include <mach/common.h> |
25 | 24 | ||
diff --git a/arch/arm/mach-davinci/psc.c b/arch/arm/mach-davinci/psc.c index a78b657e916e..04a3cb72c5ab 100644 --- a/arch/arm/mach-davinci/psc.c +++ b/arch/arm/mach-davinci/psc.c | |||
@@ -19,14 +19,11 @@ | |||
19 | * | 19 | * |
20 | */ | 20 | */ |
21 | #include <linux/kernel.h> | 21 | #include <linux/kernel.h> |
22 | #include <linux/module.h> | ||
23 | #include <linux/init.h> | 22 | #include <linux/init.h> |
24 | #include <linux/io.h> | 23 | #include <linux/io.h> |
25 | 24 | ||
26 | #include <mach/cputype.h> | 25 | #include <mach/cputype.h> |
27 | #include <mach/hardware.h> | ||
28 | #include <mach/psc.h> | 26 | #include <mach/psc.h> |
29 | #include <mach/mux.h> | ||
30 | 27 | ||
31 | /* PSC register offsets */ | 28 | /* PSC register offsets */ |
32 | #define EPCPR 0x070 | 29 | #define EPCPR 0x070 |
diff --git a/arch/arm/mach-davinci/serial.c b/arch/arm/mach-davinci/serial.c index c530c7333d0a..7ce5ba086575 100644 --- a/arch/arm/mach-davinci/serial.c +++ b/arch/arm/mach-davinci/serial.c | |||
@@ -28,14 +28,8 @@ | |||
28 | #include <linux/clk.h> | 28 | #include <linux/clk.h> |
29 | #include <linux/io.h> | 29 | #include <linux/io.h> |
30 | 30 | ||
31 | #include <asm/irq.h> | ||
32 | #include <mach/hardware.h> | ||
33 | #include <mach/serial.h> | 31 | #include <mach/serial.h> |
34 | #include <mach/irqs.h> | ||
35 | #include <mach/cputype.h> | 32 | #include <mach/cputype.h> |
36 | #include <mach/common.h> | ||
37 | |||
38 | #include "clock.h" | ||
39 | 33 | ||
40 | static inline unsigned int serial_read_reg(struct plat_serial8250_port *up, | 34 | static inline unsigned int serial_read_reg(struct plat_serial8250_port *up, |
41 | int offset) | 35 | int offset) |
diff --git a/arch/arm/mach-davinci/sram.c b/arch/arm/mach-davinci/sram.c index 4f1fc9b318b3..db0f7787faf1 100644 --- a/arch/arm/mach-davinci/sram.c +++ b/arch/arm/mach-davinci/sram.c | |||
@@ -9,15 +9,12 @@ | |||
9 | * (at your option) any later version. | 9 | * (at your option) any later version. |
10 | */ | 10 | */ |
11 | #include <linux/module.h> | 11 | #include <linux/module.h> |
12 | #include <linux/kernel.h> | ||
13 | #include <linux/init.h> | 12 | #include <linux/init.h> |
14 | #include <linux/genalloc.h> | 13 | #include <linux/genalloc.h> |
15 | 14 | ||
16 | #include <mach/common.h> | 15 | #include <mach/common.h> |
17 | #include <mach/memory.h> | ||
18 | #include <mach/sram.h> | 16 | #include <mach/sram.h> |
19 | 17 | ||
20 | |||
21 | static struct gen_pool *sram_pool; | 18 | static struct gen_pool *sram_pool; |
22 | 19 | ||
23 | void *sram_alloc(size_t len, dma_addr_t *dma) | 20 | void *sram_alloc(size_t len, dma_addr_t *dma) |
diff --git a/arch/arm/mach-davinci/time.c b/arch/arm/mach-davinci/time.c index 0d1b6d407b46..42d985beece5 100644 --- a/arch/arm/mach-davinci/time.c +++ b/arch/arm/mach-davinci/time.c | |||
@@ -14,20 +14,14 @@ | |||
14 | #include <linux/interrupt.h> | 14 | #include <linux/interrupt.h> |
15 | #include <linux/clocksource.h> | 15 | #include <linux/clocksource.h> |
16 | #include <linux/clockchips.h> | 16 | #include <linux/clockchips.h> |
17 | #include <linux/spinlock.h> | ||
18 | #include <linux/io.h> | 17 | #include <linux/io.h> |
19 | #include <linux/clk.h> | 18 | #include <linux/clk.h> |
20 | #include <linux/err.h> | 19 | #include <linux/err.h> |
21 | #include <linux/device.h> | ||
22 | #include <linux/platform_device.h> | 20 | #include <linux/platform_device.h> |
23 | 21 | ||
24 | #include <mach/hardware.h> | 22 | #include <mach/hardware.h> |
25 | #include <asm/system.h> | ||
26 | #include <asm/irq.h> | ||
27 | #include <asm/mach/irq.h> | 23 | #include <asm/mach/irq.h> |
28 | #include <asm/mach/time.h> | 24 | #include <asm/mach/time.h> |
29 | #include <asm/errno.h> | ||
30 | #include <mach/io.h> | ||
31 | #include <mach/cputype.h> | 25 | #include <mach/cputype.h> |
32 | #include <mach/time.h> | 26 | #include <mach/time.h> |
33 | #include "clock.h" | 27 | #include "clock.h" |
diff --git a/arch/arm/mach-davinci/usb.c b/arch/arm/mach-davinci/usb.c index 06f55931620c..31f0cbea0caa 100644 --- a/arch/arm/mach-davinci/usb.c +++ b/arch/arm/mach-davinci/usb.c | |||
@@ -1,21 +1,21 @@ | |||
1 | /* | 1 | /* |
2 | * USB | 2 | * USB |
3 | */ | 3 | */ |
4 | #include <linux/kernel.h> | ||
5 | #include <linux/module.h> | ||
6 | #include <linux/init.h> | 4 | #include <linux/init.h> |
7 | #include <linux/platform_device.h> | 5 | #include <linux/platform_device.h> |
8 | #include <linux/dma-mapping.h> | 6 | #include <linux/dma-mapping.h> |
9 | 7 | ||
10 | #include <linux/usb/musb.h> | 8 | #include <linux/usb/musb.h> |
11 | #include <linux/usb/otg.h> | ||
12 | 9 | ||
13 | #include <mach/common.h> | 10 | #include <mach/common.h> |
14 | #include <mach/hardware.h> | ||
15 | #include <mach/irqs.h> | 11 | #include <mach/irqs.h> |
16 | #include <mach/cputype.h> | 12 | #include <mach/cputype.h> |
13 | #include <mach/usb.h> | ||
17 | 14 | ||
18 | #define DAVINCI_USB_OTG_BASE 0x01C64000 | 15 | #define DAVINCI_USB_OTG_BASE 0x01c64000 |
16 | |||
17 | #define DA8XX_USB0_BASE 0x01e00000 | ||
18 | #define DA8XX_USB1_BASE 0x01e25000 | ||
19 | 19 | ||
20 | #if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE) | 20 | #if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE) |
21 | static struct musb_hdrc_eps_bits musb_eps[] = { | 21 | static struct musb_hdrc_eps_bits musb_eps[] = { |
@@ -85,10 +85,10 @@ static struct platform_device usb_dev = { | |||
85 | .num_resources = ARRAY_SIZE(usb_resources), | 85 | .num_resources = ARRAY_SIZE(usb_resources), |
86 | }; | 86 | }; |
87 | 87 | ||
88 | void __init setup_usb(unsigned mA, unsigned potpgt_msec) | 88 | void __init davinci_setup_usb(unsigned mA, unsigned potpgt_ms) |
89 | { | 89 | { |
90 | usb_data.power = mA / 2; | 90 | usb_data.power = mA > 510 ? 255 : mA / 2; |
91 | usb_data.potpgt = potpgt_msec / 2; | 91 | usb_data.potpgt = (potpgt_ms + 1) / 2; |
92 | 92 | ||
93 | if (cpu_is_davinci_dm646x()) { | 93 | if (cpu_is_davinci_dm646x()) { |
94 | /* Override the defaults as DM6467 uses different IRQs. */ | 94 | /* Override the defaults as DM6467 uses different IRQs. */ |
@@ -100,11 +100,77 @@ void __init setup_usb(unsigned mA, unsigned potpgt_msec) | |||
100 | platform_device_register(&usb_dev); | 100 | platform_device_register(&usb_dev); |
101 | } | 101 | } |
102 | 102 | ||
103 | #ifdef CONFIG_ARCH_DAVINCI_DA8XX | ||
104 | static struct resource da8xx_usb20_resources[] = { | ||
105 | { | ||
106 | .start = DA8XX_USB0_BASE, | ||
107 | .end = DA8XX_USB0_BASE + SZ_64K - 1, | ||
108 | .flags = IORESOURCE_MEM, | ||
109 | }, | ||
110 | { | ||
111 | .start = IRQ_DA8XX_USB_INT, | ||
112 | .flags = IORESOURCE_IRQ, | ||
113 | }, | ||
114 | }; | ||
115 | |||
116 | int __init da8xx_register_usb20(unsigned mA, unsigned potpgt) | ||
117 | { | ||
118 | usb_data.clock = "usb20"; | ||
119 | usb_data.power = mA > 510 ? 255 : mA / 2; | ||
120 | usb_data.potpgt = (potpgt + 1) / 2; | ||
121 | |||
122 | usb_dev.resource = da8xx_usb20_resources; | ||
123 | usb_dev.num_resources = ARRAY_SIZE(da8xx_usb20_resources); | ||
124 | |||
125 | return platform_device_register(&usb_dev); | ||
126 | } | ||
127 | #endif /* CONFIG_DAVINCI_DA8XX */ | ||
128 | |||
103 | #else | 129 | #else |
104 | 130 | ||
105 | void __init setup_usb(unsigned mA, unsigned potpgt_msec) | 131 | void __init davinci_setup_usb(unsigned mA, unsigned potpgt_ms) |
106 | { | 132 | { |
107 | } | 133 | } |
108 | 134 | ||
135 | #ifdef CONFIG_ARCH_DAVINCI_DA8XX | ||
136 | int __init da8xx_register_usb20(unsigned mA, unsigned potpgt) | ||
137 | { | ||
138 | return 0; | ||
139 | } | ||
140 | #endif | ||
141 | |||
109 | #endif /* CONFIG_USB_MUSB_HDRC */ | 142 | #endif /* CONFIG_USB_MUSB_HDRC */ |
110 | 143 | ||
144 | #ifdef CONFIG_ARCH_DAVINCI_DA8XX | ||
145 | static struct resource da8xx_usb11_resources[] = { | ||
146 | [0] = { | ||
147 | .start = DA8XX_USB1_BASE, | ||
148 | .end = DA8XX_USB1_BASE + SZ_4K - 1, | ||
149 | .flags = IORESOURCE_MEM, | ||
150 | }, | ||
151 | [1] = { | ||
152 | .start = IRQ_DA8XX_IRQN, | ||
153 | .end = IRQ_DA8XX_IRQN, | ||
154 | .flags = IORESOURCE_IRQ, | ||
155 | }, | ||
156 | }; | ||
157 | |||
158 | static u64 da8xx_usb11_dma_mask = DMA_BIT_MASK(32); | ||
159 | |||
160 | static struct platform_device da8xx_usb11_device = { | ||
161 | .name = "ohci", | ||
162 | .id = 0, | ||
163 | .dev = { | ||
164 | .dma_mask = &da8xx_usb11_dma_mask, | ||
165 | .coherent_dma_mask = DMA_BIT_MASK(32), | ||
166 | }, | ||
167 | .num_resources = ARRAY_SIZE(da8xx_usb11_resources), | ||
168 | .resource = da8xx_usb11_resources, | ||
169 | }; | ||
170 | |||
171 | int __init da8xx_register_usb11(struct da8xx_ohci_root_hub *pdata) | ||
172 | { | ||
173 | da8xx_usb11_device.dev.platform_data = pdata; | ||
174 | return platform_device_register(&da8xx_usb11_device); | ||
175 | } | ||
176 | #endif /* CONFIG_DAVINCI_DA8XX */ | ||