diff options
-rw-r--r-- | arch/arm/configs/cm_x270_defconfig | 1410 | ||||
-rw-r--r-- | arch/arm/mach-pxa/Kconfig | 5 | ||||
-rw-r--r-- | arch/arm/mach-pxa/Makefile | 6 | ||||
-rw-r--r-- | arch/arm/mach-pxa/cm-x270-pci.c | 218 | ||||
-rw-r--r-- | arch/arm/mach-pxa/cm-x270-pci.h | 13 | ||||
-rw-r--r-- | arch/arm/mach-pxa/cm-x270.c | 645 | ||||
-rw-r--r-- | drivers/leds/Kconfig | 6 | ||||
-rw-r--r-- | drivers/leds/Makefile | 1 | ||||
-rw-r--r-- | drivers/leds/leds-cm-x270.c | 122 | ||||
-rw-r--r-- | include/asm-arm/arch-pxa/cm-x270.h | 50 | ||||
-rw-r--r-- | include/asm-arm/arch-pxa/dma.h | 4 | ||||
-rw-r--r-- | include/asm-arm/arch-pxa/hardware.h | 6 | ||||
-rw-r--r-- | include/asm-arm/arch-pxa/irqs.h | 21 | ||||
-rw-r--r-- | include/asm-arm/arch-pxa/memory.h | 10 |
14 files changed, 2517 insertions, 0 deletions
diff --git a/arch/arm/configs/cm_x270_defconfig b/arch/arm/configs/cm_x270_defconfig new file mode 100644 index 000000000000..5cab08397ae7 --- /dev/null +++ b/arch/arm/configs/cm_x270_defconfig | |||
@@ -0,0 +1,1410 @@ | |||
1 | # | ||
2 | # Automatically generated make config: don't edit | ||
3 | # Linux kernel version: 2.6.22 | ||
4 | # Wed Jul 18 14:11:48 2007 | ||
5 | # | ||
6 | CONFIG_ARM=y | ||
7 | CONFIG_SYS_SUPPORTS_APM_EMULATION=y | ||
8 | CONFIG_GENERIC_GPIO=y | ||
9 | CONFIG_GENERIC_TIME=y | ||
10 | # CONFIG_GENERIC_CLOCKEVENTS is not set | ||
11 | CONFIG_MMU=y | ||
12 | # CONFIG_NO_IOPORT is not set | ||
13 | CONFIG_GENERIC_HARDIRQS=y | ||
14 | CONFIG_STACKTRACE_SUPPORT=y | ||
15 | CONFIG_LOCKDEP_SUPPORT=y | ||
16 | CONFIG_TRACE_IRQFLAGS_SUPPORT=y | ||
17 | CONFIG_HARDIRQS_SW_RESEND=y | ||
18 | CONFIG_GENERIC_IRQ_PROBE=y | ||
19 | CONFIG_RWSEM_GENERIC_SPINLOCK=y | ||
20 | # CONFIG_ARCH_HAS_ILOG2_U32 is not set | ||
21 | # CONFIG_ARCH_HAS_ILOG2_U64 is not set | ||
22 | CONFIG_GENERIC_HWEIGHT=y | ||
23 | CONFIG_GENERIC_CALIBRATE_DELAY=y | ||
24 | CONFIG_ZONE_DMA=y | ||
25 | CONFIG_ARCH_MTD_XIP=y | ||
26 | CONFIG_VECTORS_BASE=0xffff0000 | ||
27 | CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" | ||
28 | |||
29 | # | ||
30 | # Code maturity level options | ||
31 | # | ||
32 | CONFIG_EXPERIMENTAL=y | ||
33 | CONFIG_BROKEN_ON_SMP=y | ||
34 | CONFIG_INIT_ENV_ARG_LIMIT=32 | ||
35 | |||
36 | # | ||
37 | # General setup | ||
38 | # | ||
39 | CONFIG_LOCALVERSION="" | ||
40 | # CONFIG_LOCALVERSION_AUTO is not set | ||
41 | CONFIG_SWAP=y | ||
42 | CONFIG_SYSVIPC=y | ||
43 | CONFIG_SYSVIPC_SYSCTL=y | ||
44 | # CONFIG_POSIX_MQUEUE is not set | ||
45 | # CONFIG_BSD_PROCESS_ACCT is not set | ||
46 | # CONFIG_TASKSTATS is not set | ||
47 | # CONFIG_USER_NS is not set | ||
48 | # CONFIG_AUDIT is not set | ||
49 | CONFIG_IKCONFIG=y | ||
50 | CONFIG_IKCONFIG_PROC=y | ||
51 | CONFIG_LOG_BUF_SHIFT=17 | ||
52 | CONFIG_SYSFS_DEPRECATED=y | ||
53 | # CONFIG_RELAY is not set | ||
54 | CONFIG_BLK_DEV_INITRD=y | ||
55 | CONFIG_INITRAMFS_SOURCE="" | ||
56 | CONFIG_CC_OPTIMIZE_FOR_SIZE=y | ||
57 | CONFIG_SYSCTL=y | ||
58 | CONFIG_EMBEDDED=y | ||
59 | CONFIG_UID16=y | ||
60 | CONFIG_SYSCTL_SYSCALL=y | ||
61 | CONFIG_KALLSYMS=y | ||
62 | # CONFIG_KALLSYMS_ALL is not set | ||
63 | # CONFIG_KALLSYMS_EXTRA_PASS is not set | ||
64 | CONFIG_HOTPLUG=y | ||
65 | CONFIG_PRINTK=y | ||
66 | CONFIG_BUG=y | ||
67 | CONFIG_ELF_CORE=y | ||
68 | CONFIG_BASE_FULL=y | ||
69 | CONFIG_FUTEX=y | ||
70 | CONFIG_ANON_INODES=y | ||
71 | # CONFIG_EPOLL is not set | ||
72 | # CONFIG_SIGNALFD is not set | ||
73 | # CONFIG_TIMERFD is not set | ||
74 | # CONFIG_EVENTFD is not set | ||
75 | CONFIG_SHMEM=y | ||
76 | CONFIG_VM_EVENT_COUNTERS=y | ||
77 | CONFIG_SLAB=y | ||
78 | # CONFIG_SLUB is not set | ||
79 | # CONFIG_SLOB is not set | ||
80 | CONFIG_RT_MUTEXES=y | ||
81 | # CONFIG_TINY_SHMEM is not set | ||
82 | CONFIG_BASE_SMALL=0 | ||
83 | CONFIG_MODULES=y | ||
84 | CONFIG_MODULE_UNLOAD=y | ||
85 | CONFIG_MODULE_FORCE_UNLOAD=y | ||
86 | # CONFIG_MODVERSIONS is not set | ||
87 | # CONFIG_MODULE_SRCVERSION_ALL is not set | ||
88 | CONFIG_KMOD=y | ||
89 | CONFIG_BLOCK=y | ||
90 | # CONFIG_LBD is not set | ||
91 | # CONFIG_BLK_DEV_IO_TRACE is not set | ||
92 | # CONFIG_LSF is not set | ||
93 | # CONFIG_BLK_DEV_BSG is not set | ||
94 | |||
95 | # | ||
96 | # IO Schedulers | ||
97 | # | ||
98 | CONFIG_IOSCHED_NOOP=y | ||
99 | CONFIG_IOSCHED_AS=y | ||
100 | CONFIG_IOSCHED_DEADLINE=y | ||
101 | CONFIG_IOSCHED_CFQ=y | ||
102 | CONFIG_DEFAULT_AS=y | ||
103 | # CONFIG_DEFAULT_DEADLINE is not set | ||
104 | # CONFIG_DEFAULT_CFQ is not set | ||
105 | # CONFIG_DEFAULT_NOOP is not set | ||
106 | CONFIG_DEFAULT_IOSCHED="anticipatory" | ||
107 | |||
108 | # | ||
109 | # System Type | ||
110 | # | ||
111 | # CONFIG_ARCH_AAEC2000 is not set | ||
112 | # CONFIG_ARCH_INTEGRATOR is not set | ||
113 | # CONFIG_ARCH_REALVIEW is not set | ||
114 | # CONFIG_ARCH_VERSATILE is not set | ||
115 | # CONFIG_ARCH_AT91 is not set | ||
116 | # CONFIG_ARCH_CLPS7500 is not set | ||
117 | # CONFIG_ARCH_CLPS711X is not set | ||
118 | # CONFIG_ARCH_CO285 is not set | ||
119 | # CONFIG_ARCH_EBSA110 is not set | ||
120 | # CONFIG_ARCH_EP93XX is not set | ||
121 | # CONFIG_ARCH_FOOTBRIDGE is not set | ||
122 | # CONFIG_ARCH_NETX is not set | ||
123 | # CONFIG_ARCH_H720X is not set | ||
124 | # CONFIG_ARCH_IMX is not set | ||
125 | # CONFIG_ARCH_IOP13XX is not set | ||
126 | # CONFIG_ARCH_IOP32X is not set | ||
127 | # CONFIG_ARCH_IOP33X is not set | ||
128 | # CONFIG_ARCH_IXP23XX is not set | ||
129 | # CONFIG_ARCH_IXP2000 is not set | ||
130 | # CONFIG_ARCH_IXP4XX is not set | ||
131 | # CONFIG_ARCH_L7200 is not set | ||
132 | # CONFIG_ARCH_KS8695 is not set | ||
133 | # CONFIG_ARCH_NS9XXX is not set | ||
134 | # CONFIG_ARCH_PNX4008 is not set | ||
135 | CONFIG_ARCH_PXA=y | ||
136 | # CONFIG_ARCH_RPC is not set | ||
137 | # CONFIG_ARCH_SA1100 is not set | ||
138 | # CONFIG_ARCH_S3C2410 is not set | ||
139 | # CONFIG_ARCH_SHARK is not set | ||
140 | # CONFIG_ARCH_LH7A40X is not set | ||
141 | # CONFIG_ARCH_DAVINCI is not set | ||
142 | # CONFIG_ARCH_OMAP is not set | ||
143 | CONFIG_DMABOUNCE=y | ||
144 | |||
145 | # | ||
146 | # Intel PXA2xx Implementations | ||
147 | # | ||
148 | # CONFIG_ARCH_LUBBOCK is not set | ||
149 | # CONFIG_MACH_LOGICPD_PXA270 is not set | ||
150 | # CONFIG_MACH_MAINSTONE is not set | ||
151 | # CONFIG_ARCH_PXA_IDP is not set | ||
152 | # CONFIG_PXA_SHARPSL is not set | ||
153 | # CONFIG_MACH_TRIZEPS4 is not set | ||
154 | CONFIG_MACH_ARMCORE=y | ||
155 | CONFIG_PXA27x=y | ||
156 | |||
157 | # | ||
158 | # Processor Type | ||
159 | # | ||
160 | CONFIG_CPU_32=y | ||
161 | CONFIG_CPU_XSCALE=y | ||
162 | CONFIG_CPU_32v5=y | ||
163 | CONFIG_CPU_ABRT_EV5T=y | ||
164 | CONFIG_CPU_CACHE_VIVT=y | ||
165 | CONFIG_CPU_TLB_V4WBI=y | ||
166 | CONFIG_CPU_CP15=y | ||
167 | CONFIG_CPU_CP15_MMU=y | ||
168 | |||
169 | # | ||
170 | # Processor Features | ||
171 | # | ||
172 | CONFIG_ARM_THUMB=y | ||
173 | # CONFIG_CPU_DCACHE_DISABLE is not set | ||
174 | # CONFIG_OUTER_CACHE is not set | ||
175 | CONFIG_IWMMXT=y | ||
176 | CONFIG_XSCALE_PMU=y | ||
177 | |||
178 | # | ||
179 | # Bus support | ||
180 | # | ||
181 | CONFIG_PCI=y | ||
182 | CONFIG_PCI_SYSCALL=y | ||
183 | CONFIG_PCI_HOST_ITE8152=y | ||
184 | # CONFIG_ARCH_SUPPORTS_MSI is not set | ||
185 | # CONFIG_PCI_DEBUG is not set | ||
186 | |||
187 | # | ||
188 | # PCCARD (PCMCIA/CardBus) support | ||
189 | # | ||
190 | # CONFIG_PCCARD is not set | ||
191 | |||
192 | # | ||
193 | # Kernel Features | ||
194 | # | ||
195 | # CONFIG_TICK_ONESHOT is not set | ||
196 | # CONFIG_PREEMPT is not set | ||
197 | # CONFIG_NO_IDLE_HZ is not set | ||
198 | CONFIG_HZ=100 | ||
199 | # CONFIG_AEABI is not set | ||
200 | # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set | ||
201 | CONFIG_SELECT_MEMORY_MODEL=y | ||
202 | CONFIG_FLATMEM_MANUAL=y | ||
203 | # CONFIG_DISCONTIGMEM_MANUAL is not set | ||
204 | # CONFIG_SPARSEMEM_MANUAL is not set | ||
205 | CONFIG_FLATMEM=y | ||
206 | CONFIG_FLAT_NODE_MEM_MAP=y | ||
207 | # CONFIG_SPARSEMEM_STATIC is not set | ||
208 | CONFIG_SPLIT_PTLOCK_CPUS=4096 | ||
209 | # CONFIG_RESOURCES_64BIT is not set | ||
210 | CONFIG_ZONE_DMA_FLAG=1 | ||
211 | CONFIG_BOUNCE=y | ||
212 | CONFIG_VIRT_TO_BUS=y | ||
213 | CONFIG_ALIGNMENT_TRAP=y | ||
214 | |||
215 | # | ||
216 | # Boot options | ||
217 | # | ||
218 | CONFIG_ZBOOT_ROM_TEXT=0x0 | ||
219 | CONFIG_ZBOOT_ROM_BSS=0x0 | ||
220 | CONFIG_CMDLINE="" | ||
221 | # CONFIG_XIP_KERNEL is not set | ||
222 | # CONFIG_KEXEC is not set | ||
223 | |||
224 | # | ||
225 | # Floating point emulation | ||
226 | # | ||
227 | |||
228 | # | ||
229 | # At least one emulation must be selected | ||
230 | # | ||
231 | CONFIG_FPE_NWFPE=y | ||
232 | # CONFIG_FPE_NWFPE_XP is not set | ||
233 | # CONFIG_FPE_FASTFPE is not set | ||
234 | |||
235 | # | ||
236 | # Userspace binary formats | ||
237 | # | ||
238 | CONFIG_BINFMT_ELF=y | ||
239 | # CONFIG_BINFMT_AOUT is not set | ||
240 | # CONFIG_BINFMT_MISC is not set | ||
241 | # CONFIG_ARTHUR is not set | ||
242 | |||
243 | # | ||
244 | # Power management options | ||
245 | # | ||
246 | CONFIG_PM=y | ||
247 | # CONFIG_PM_LEGACY is not set | ||
248 | # CONFIG_PM_DEBUG is not set | ||
249 | # CONFIG_PM_SYSFS_DEPRECATED is not set | ||
250 | # CONFIG_APM_EMULATION is not set | ||
251 | |||
252 | # | ||
253 | # Networking | ||
254 | # | ||
255 | CONFIG_NET=y | ||
256 | |||
257 | # | ||
258 | # Networking options | ||
259 | # | ||
260 | CONFIG_PACKET=y | ||
261 | # CONFIG_PACKET_MMAP is not set | ||
262 | CONFIG_UNIX=y | ||
263 | CONFIG_XFRM=y | ||
264 | # CONFIG_XFRM_USER is not set | ||
265 | # CONFIG_XFRM_SUB_POLICY is not set | ||
266 | # CONFIG_XFRM_MIGRATE is not set | ||
267 | # CONFIG_NET_KEY is not set | ||
268 | CONFIG_INET=y | ||
269 | # CONFIG_IP_MULTICAST is not set | ||
270 | # CONFIG_IP_ADVANCED_ROUTER is not set | ||
271 | CONFIG_IP_FIB_HASH=y | ||
272 | CONFIG_IP_PNP=y | ||
273 | CONFIG_IP_PNP_DHCP=y | ||
274 | CONFIG_IP_PNP_BOOTP=y | ||
275 | # CONFIG_IP_PNP_RARP is not set | ||
276 | # CONFIG_NET_IPIP is not set | ||
277 | # CONFIG_NET_IPGRE is not set | ||
278 | # CONFIG_ARPD is not set | ||
279 | # CONFIG_SYN_COOKIES is not set | ||
280 | # CONFIG_INET_AH is not set | ||
281 | # CONFIG_INET_ESP is not set | ||
282 | # CONFIG_INET_IPCOMP is not set | ||
283 | # CONFIG_INET_XFRM_TUNNEL is not set | ||
284 | # CONFIG_INET_TUNNEL is not set | ||
285 | CONFIG_INET_XFRM_MODE_TRANSPORT=y | ||
286 | CONFIG_INET_XFRM_MODE_TUNNEL=y | ||
287 | CONFIG_INET_XFRM_MODE_BEET=y | ||
288 | CONFIG_INET_DIAG=y | ||
289 | CONFIG_INET_TCP_DIAG=y | ||
290 | # CONFIG_TCP_CONG_ADVANCED is not set | ||
291 | CONFIG_TCP_CONG_CUBIC=y | ||
292 | CONFIG_DEFAULT_TCP_CONG="cubic" | ||
293 | # CONFIG_TCP_MD5SIG is not set | ||
294 | # CONFIG_IPV6 is not set | ||
295 | # CONFIG_INET6_XFRM_TUNNEL is not set | ||
296 | # CONFIG_INET6_TUNNEL is not set | ||
297 | # CONFIG_NETWORK_SECMARK is not set | ||
298 | # CONFIG_NETFILTER is not set | ||
299 | # CONFIG_IP_DCCP is not set | ||
300 | # CONFIG_IP_SCTP is not set | ||
301 | # CONFIG_TIPC is not set | ||
302 | # CONFIG_ATM is not set | ||
303 | # CONFIG_BRIDGE is not set | ||
304 | # CONFIG_VLAN_8021Q is not set | ||
305 | # CONFIG_DECNET is not set | ||
306 | # CONFIG_LLC2 is not set | ||
307 | # CONFIG_IPX is not set | ||
308 | # CONFIG_ATALK is not set | ||
309 | # CONFIG_X25 is not set | ||
310 | # CONFIG_LAPB is not set | ||
311 | # CONFIG_ECONET is not set | ||
312 | # CONFIG_WAN_ROUTER is not set | ||
313 | |||
314 | # | ||
315 | # QoS and/or fair queueing | ||
316 | # | ||
317 | # CONFIG_NET_SCHED is not set | ||
318 | |||
319 | # | ||
320 | # Network testing | ||
321 | # | ||
322 | # CONFIG_NET_PKTGEN is not set | ||
323 | # CONFIG_HAMRADIO is not set | ||
324 | # CONFIG_IRDA is not set | ||
325 | # CONFIG_BT is not set | ||
326 | # CONFIG_AF_RXRPC is not set | ||
327 | |||
328 | # | ||
329 | # Wireless | ||
330 | # | ||
331 | # CONFIG_CFG80211 is not set | ||
332 | CONFIG_WIRELESS_EXT=y | ||
333 | # CONFIG_MAC80211 is not set | ||
334 | CONFIG_IEEE80211=m | ||
335 | # CONFIG_IEEE80211_DEBUG is not set | ||
336 | CONFIG_IEEE80211_CRYPT_WEP=m | ||
337 | CONFIG_IEEE80211_CRYPT_CCMP=m | ||
338 | # CONFIG_IEEE80211_CRYPT_TKIP is not set | ||
339 | # CONFIG_IEEE80211_SOFTMAC is not set | ||
340 | # CONFIG_RFKILL is not set | ||
341 | # CONFIG_NET_9P is not set | ||
342 | |||
343 | # | ||
344 | # Device Drivers | ||
345 | # | ||
346 | |||
347 | # | ||
348 | # Generic Driver Options | ||
349 | # | ||
350 | CONFIG_STANDALONE=y | ||
351 | CONFIG_PREVENT_FIRMWARE_BUILD=y | ||
352 | CONFIG_FW_LOADER=y | ||
353 | # CONFIG_DEBUG_DRIVER is not set | ||
354 | # CONFIG_DEBUG_DEVRES is not set | ||
355 | # CONFIG_SYS_HYPERVISOR is not set | ||
356 | # CONFIG_CONNECTOR is not set | ||
357 | CONFIG_MTD=m | ||
358 | # CONFIG_MTD_DEBUG is not set | ||
359 | # CONFIG_MTD_CONCAT is not set | ||
360 | CONFIG_MTD_PARTITIONS=y | ||
361 | # CONFIG_MTD_REDBOOT_PARTS is not set | ||
362 | # CONFIG_MTD_AFS_PARTS is not set | ||
363 | |||
364 | # | ||
365 | # User Modules And Translation Layers | ||
366 | # | ||
367 | CONFIG_MTD_CHAR=m | ||
368 | CONFIG_MTD_BLKDEVS=m | ||
369 | CONFIG_MTD_BLOCK=m | ||
370 | # CONFIG_MTD_BLOCK_RO is not set | ||
371 | # CONFIG_FTL is not set | ||
372 | # CONFIG_NFTL is not set | ||
373 | # CONFIG_INFTL is not set | ||
374 | # CONFIG_RFD_FTL is not set | ||
375 | # CONFIG_SSFDC is not set | ||
376 | |||
377 | # | ||
378 | # RAM/ROM/Flash chip drivers | ||
379 | # | ||
380 | # CONFIG_MTD_CFI is not set | ||
381 | # CONFIG_MTD_JEDECPROBE is not set | ||
382 | CONFIG_MTD_MAP_BANK_WIDTH_1=y | ||
383 | CONFIG_MTD_MAP_BANK_WIDTH_2=y | ||
384 | CONFIG_MTD_MAP_BANK_WIDTH_4=y | ||
385 | # CONFIG_MTD_MAP_BANK_WIDTH_8 is not set | ||
386 | # CONFIG_MTD_MAP_BANK_WIDTH_16 is not set | ||
387 | # CONFIG_MTD_MAP_BANK_WIDTH_32 is not set | ||
388 | CONFIG_MTD_CFI_I1=y | ||
389 | CONFIG_MTD_CFI_I2=y | ||
390 | # CONFIG_MTD_CFI_I4 is not set | ||
391 | # CONFIG_MTD_CFI_I8 is not set | ||
392 | # CONFIG_MTD_RAM is not set | ||
393 | # CONFIG_MTD_ROM is not set | ||
394 | # CONFIG_MTD_ABSENT is not set | ||
395 | |||
396 | # | ||
397 | # Mapping drivers for chip access | ||
398 | # | ||
399 | # CONFIG_MTD_COMPLEX_MAPPINGS is not set | ||
400 | # CONFIG_MTD_SHARP_SL is not set | ||
401 | # CONFIG_MTD_PLATRAM is not set | ||
402 | |||
403 | # | ||
404 | # Self-contained MTD device drivers | ||
405 | # | ||
406 | # CONFIG_MTD_PMC551 is not set | ||
407 | # CONFIG_MTD_SLRAM is not set | ||
408 | # CONFIG_MTD_PHRAM is not set | ||
409 | # CONFIG_MTD_MTDRAM is not set | ||
410 | # CONFIG_MTD_BLOCK2MTD is not set | ||
411 | |||
412 | # | ||
413 | # Disk-On-Chip Device Drivers | ||
414 | # | ||
415 | # CONFIG_MTD_DOC2000 is not set | ||
416 | # CONFIG_MTD_DOC2001 is not set | ||
417 | # CONFIG_MTD_DOC2001PLUS is not set | ||
418 | CONFIG_MTD_NAND=m | ||
419 | # CONFIG_MTD_NAND_VERIFY_WRITE is not set | ||
420 | # CONFIG_MTD_NAND_ECC_SMC is not set | ||
421 | # CONFIG_MTD_NAND_MUSEUM_IDS is not set | ||
422 | # CONFIG_MTD_NAND_H1900 is not set | ||
423 | CONFIG_MTD_NAND_IDS=m | ||
424 | # CONFIG_MTD_NAND_DISKONCHIP is not set | ||
425 | # CONFIG_MTD_NAND_SHARPSL is not set | ||
426 | # CONFIG_MTD_NAND_CAFE is not set | ||
427 | CONFIG_MTD_NAND_CM_X270=m | ||
428 | # CONFIG_MTD_NAND_NANDSIM is not set | ||
429 | # CONFIG_MTD_NAND_PLATFORM is not set | ||
430 | # CONFIG_MTD_ONENAND is not set | ||
431 | |||
432 | # | ||
433 | # UBI - Unsorted block images | ||
434 | # | ||
435 | # CONFIG_MTD_UBI is not set | ||
436 | # CONFIG_PARPORT is not set | ||
437 | CONFIG_BLK_DEV=y | ||
438 | # CONFIG_BLK_CPQ_DA is not set | ||
439 | # CONFIG_BLK_CPQ_CISS_DA is not set | ||
440 | # CONFIG_BLK_DEV_DAC960 is not set | ||
441 | # CONFIG_BLK_DEV_UMEM is not set | ||
442 | # CONFIG_BLK_DEV_COW_COMMON is not set | ||
443 | CONFIG_BLK_DEV_LOOP=y | ||
444 | # CONFIG_BLK_DEV_CRYPTOLOOP is not set | ||
445 | # CONFIG_BLK_DEV_NBD is not set | ||
446 | # CONFIG_BLK_DEV_SX8 is not set | ||
447 | # CONFIG_BLK_DEV_UB is not set | ||
448 | CONFIG_BLK_DEV_RAM=y | ||
449 | CONFIG_BLK_DEV_RAM_COUNT=16 | ||
450 | CONFIG_BLK_DEV_RAM_SIZE=12000 | ||
451 | CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 | ||
452 | # CONFIG_CDROM_PKTCDVD is not set | ||
453 | # CONFIG_ATA_OVER_ETH is not set | ||
454 | CONFIG_IDE=m | ||
455 | CONFIG_IDE_MAX_HWIFS=4 | ||
456 | CONFIG_BLK_DEV_IDE=m | ||
457 | |||
458 | # | ||
459 | # Please see Documentation/ide.txt for help/info on IDE drives | ||
460 | # | ||
461 | # CONFIG_BLK_DEV_IDE_SATA is not set | ||
462 | CONFIG_BLK_DEV_IDEDISK=m | ||
463 | # CONFIG_IDEDISK_MULTI_MODE is not set | ||
464 | CONFIG_BLK_DEV_IDECD=m | ||
465 | # CONFIG_BLK_DEV_IDETAPE is not set | ||
466 | # CONFIG_BLK_DEV_IDEFLOPPY is not set | ||
467 | # CONFIG_BLK_DEV_IDESCSI is not set | ||
468 | # CONFIG_IDE_TASK_IOCTL is not set | ||
469 | CONFIG_IDE_PROC_FS=y | ||
470 | |||
471 | # | ||
472 | # IDE chipset support/bugfixes | ||
473 | # | ||
474 | # CONFIG_IDE_GENERIC is not set | ||
475 | # CONFIG_BLK_DEV_IDEPCI is not set | ||
476 | # CONFIG_IDEPCI_PCIBUS_ORDER is not set | ||
477 | # CONFIG_IDE_ARM is not set | ||
478 | # CONFIG_BLK_DEV_IDEDMA is not set | ||
479 | # CONFIG_BLK_DEV_HD is not set | ||
480 | |||
481 | # | ||
482 | # SCSI device support | ||
483 | # | ||
484 | # CONFIG_RAID_ATTRS is not set | ||
485 | CONFIG_SCSI=y | ||
486 | CONFIG_SCSI_DMA=y | ||
487 | # CONFIG_SCSI_TGT is not set | ||
488 | # CONFIG_SCSI_NETLINK is not set | ||
489 | # CONFIG_SCSI_PROC_FS is not set | ||
490 | |||
491 | # | ||
492 | # SCSI support type (disk, tape, CD-ROM) | ||
493 | # | ||
494 | CONFIG_BLK_DEV_SD=y | ||
495 | # CONFIG_CHR_DEV_ST is not set | ||
496 | # CONFIG_CHR_DEV_OSST is not set | ||
497 | # CONFIG_BLK_DEV_SR is not set | ||
498 | # CONFIG_CHR_DEV_SG is not set | ||
499 | # CONFIG_CHR_DEV_SCH is not set | ||
500 | |||
501 | # | ||
502 | # Some SCSI devices (e.g. CD jukebox) support multiple LUNs | ||
503 | # | ||
504 | # CONFIG_SCSI_MULTI_LUN is not set | ||
505 | # CONFIG_SCSI_CONSTANTS is not set | ||
506 | # CONFIG_SCSI_LOGGING is not set | ||
507 | # CONFIG_SCSI_SCAN_ASYNC is not set | ||
508 | CONFIG_SCSI_WAIT_SCAN=m | ||
509 | |||
510 | # | ||
511 | # SCSI Transports | ||
512 | # | ||
513 | # CONFIG_SCSI_SPI_ATTRS is not set | ||
514 | # CONFIG_SCSI_FC_ATTRS is not set | ||
515 | # CONFIG_SCSI_ISCSI_ATTRS is not set | ||
516 | # CONFIG_SCSI_SAS_ATTRS is not set | ||
517 | # CONFIG_SCSI_SAS_LIBSAS is not set | ||
518 | |||
519 | # | ||
520 | # SCSI low-level drivers | ||
521 | # | ||
522 | # CONFIG_ISCSI_TCP is not set | ||
523 | # CONFIG_BLK_DEV_3W_XXXX_RAID is not set | ||
524 | # CONFIG_SCSI_3W_9XXX is not set | ||
525 | # CONFIG_SCSI_ACARD is not set | ||
526 | # CONFIG_SCSI_AACRAID is not set | ||
527 | # CONFIG_SCSI_AIC7XXX is not set | ||
528 | # CONFIG_SCSI_AIC7XXX_OLD is not set | ||
529 | # CONFIG_SCSI_AIC79XX is not set | ||
530 | # CONFIG_SCSI_AIC94XX is not set | ||
531 | # CONFIG_SCSI_DPT_I2O is not set | ||
532 | # CONFIG_SCSI_ARCMSR is not set | ||
533 | # CONFIG_MEGARAID_NEWGEN is not set | ||
534 | # CONFIG_MEGARAID_LEGACY is not set | ||
535 | # CONFIG_MEGARAID_SAS is not set | ||
536 | # CONFIG_SCSI_HPTIOP is not set | ||
537 | # CONFIG_SCSI_DMX3191D is not set | ||
538 | # CONFIG_SCSI_FUTURE_DOMAIN is not set | ||
539 | # CONFIG_SCSI_IPS is not set | ||
540 | # CONFIG_SCSI_INITIO is not set | ||
541 | # CONFIG_SCSI_INIA100 is not set | ||
542 | # CONFIG_SCSI_STEX is not set | ||
543 | # CONFIG_SCSI_SYM53C8XX_2 is not set | ||
544 | # CONFIG_SCSI_QLOGIC_1280 is not set | ||
545 | # CONFIG_SCSI_QLA_FC is not set | ||
546 | # CONFIG_SCSI_QLA_ISCSI is not set | ||
547 | # CONFIG_SCSI_LPFC is not set | ||
548 | # CONFIG_SCSI_DC395x is not set | ||
549 | # CONFIG_SCSI_DC390T is not set | ||
550 | # CONFIG_SCSI_NSP32 is not set | ||
551 | # CONFIG_SCSI_DEBUG is not set | ||
552 | # CONFIG_SCSI_SRP is not set | ||
553 | # CONFIG_ATA is not set | ||
554 | # CONFIG_MD is not set | ||
555 | |||
556 | # | ||
557 | # Fusion MPT device support | ||
558 | # | ||
559 | # CONFIG_FUSION is not set | ||
560 | # CONFIG_FUSION_SPI is not set | ||
561 | # CONFIG_FUSION_FC is not set | ||
562 | # CONFIG_FUSION_SAS is not set | ||
563 | |||
564 | # | ||
565 | # IEEE 1394 (FireWire) support | ||
566 | # | ||
567 | # CONFIG_FIREWIRE is not set | ||
568 | # CONFIG_IEEE1394 is not set | ||
569 | # CONFIG_I2O is not set | ||
570 | CONFIG_NETDEVICES=y | ||
571 | # CONFIG_NETDEVICES_MULTIQUEUE is not set | ||
572 | # CONFIG_DUMMY is not set | ||
573 | # CONFIG_BONDING is not set | ||
574 | # CONFIG_MACVLAN is not set | ||
575 | # CONFIG_EQUALIZER is not set | ||
576 | # CONFIG_TUN is not set | ||
577 | # CONFIG_ARCNET is not set | ||
578 | # CONFIG_PHYLIB is not set | ||
579 | CONFIG_NET_ETHERNET=y | ||
580 | CONFIG_MII=y | ||
581 | # CONFIG_AX88796 is not set | ||
582 | # CONFIG_HAPPYMEAL is not set | ||
583 | # CONFIG_SUNGEM is not set | ||
584 | # CONFIG_CASSINI is not set | ||
585 | # CONFIG_NET_VENDOR_3COM is not set | ||
586 | # CONFIG_SMC91X is not set | ||
587 | CONFIG_DM9000=y | ||
588 | # CONFIG_SMC911X is not set | ||
589 | # CONFIG_NET_TULIP is not set | ||
590 | # CONFIG_HP100 is not set | ||
591 | CONFIG_NET_PCI=y | ||
592 | # CONFIG_PCNET32 is not set | ||
593 | # CONFIG_AMD8111_ETH is not set | ||
594 | # CONFIG_ADAPTEC_STARFIRE is not set | ||
595 | # CONFIG_B44 is not set | ||
596 | # CONFIG_FORCEDETH is not set | ||
597 | # CONFIG_DGRS is not set | ||
598 | # CONFIG_EEPRO100 is not set | ||
599 | # CONFIG_E100 is not set | ||
600 | # CONFIG_FEALNX is not set | ||
601 | # CONFIG_NATSEMI is not set | ||
602 | # CONFIG_NE2K_PCI is not set | ||
603 | # CONFIG_8139CP is not set | ||
604 | CONFIG_8139TOO=m | ||
605 | # CONFIG_8139TOO_PIO is not set | ||
606 | # CONFIG_8139TOO_TUNE_TWISTER is not set | ||
607 | # CONFIG_8139TOO_8129 is not set | ||
608 | # CONFIG_8139_OLD_RX_RESET is not set | ||
609 | # CONFIG_SIS900 is not set | ||
610 | # CONFIG_EPIC100 is not set | ||
611 | # CONFIG_SUNDANCE is not set | ||
612 | # CONFIG_TLAN is not set | ||
613 | # CONFIG_VIA_RHINE is not set | ||
614 | # CONFIG_SC92031 is not set | ||
615 | CONFIG_NETDEV_1000=y | ||
616 | # CONFIG_ACENIC is not set | ||
617 | # CONFIG_DL2K is not set | ||
618 | # CONFIG_E1000 is not set | ||
619 | # CONFIG_NS83820 is not set | ||
620 | # CONFIG_HAMACHI is not set | ||
621 | # CONFIG_YELLOWFIN is not set | ||
622 | # CONFIG_R8169 is not set | ||
623 | # CONFIG_SIS190 is not set | ||
624 | # CONFIG_SKGE is not set | ||
625 | # CONFIG_SKY2 is not set | ||
626 | # CONFIG_VIA_VELOCITY is not set | ||
627 | # CONFIG_TIGON3 is not set | ||
628 | # CONFIG_BNX2 is not set | ||
629 | # CONFIG_QLA3XXX is not set | ||
630 | # CONFIG_ATL1 is not set | ||
631 | CONFIG_NETDEV_10000=y | ||
632 | # CONFIG_CHELSIO_T1 is not set | ||
633 | # CONFIG_CHELSIO_T3 is not set | ||
634 | # CONFIG_IXGB is not set | ||
635 | # CONFIG_S2IO is not set | ||
636 | # CONFIG_MYRI10GE is not set | ||
637 | # CONFIG_NETXEN_NIC is not set | ||
638 | # CONFIG_MLX4_CORE is not set | ||
639 | # CONFIG_TR is not set | ||
640 | |||
641 | # | ||
642 | # Wireless LAN | ||
643 | # | ||
644 | # CONFIG_WLAN_PRE80211 is not set | ||
645 | # CONFIG_WLAN_80211 is not set | ||
646 | |||
647 | # | ||
648 | # USB Network Adapters | ||
649 | # | ||
650 | # CONFIG_USB_CATC is not set | ||
651 | # CONFIG_USB_KAWETH is not set | ||
652 | # CONFIG_USB_PEGASUS is not set | ||
653 | # CONFIG_USB_RTL8150 is not set | ||
654 | # CONFIG_USB_USBNET_MII is not set | ||
655 | # CONFIG_USB_USBNET is not set | ||
656 | # CONFIG_WAN is not set | ||
657 | # CONFIG_FDDI is not set | ||
658 | # CONFIG_HIPPI is not set | ||
659 | # CONFIG_PPP is not set | ||
660 | # CONFIG_SLIP is not set | ||
661 | # CONFIG_NET_FC is not set | ||
662 | # CONFIG_SHAPER is not set | ||
663 | # CONFIG_NETCONSOLE is not set | ||
664 | # CONFIG_NETPOLL is not set | ||
665 | # CONFIG_NET_POLL_CONTROLLER is not set | ||
666 | # CONFIG_ISDN is not set | ||
667 | |||
668 | # | ||
669 | # Input device support | ||
670 | # | ||
671 | CONFIG_INPUT=y | ||
672 | # CONFIG_INPUT_FF_MEMLESS is not set | ||
673 | # CONFIG_INPUT_POLLDEV is not set | ||
674 | |||
675 | # | ||
676 | # Userland interfaces | ||
677 | # | ||
678 | # CONFIG_INPUT_MOUSEDEV is not set | ||
679 | # CONFIG_INPUT_JOYDEV is not set | ||
680 | # CONFIG_INPUT_TSDEV is not set | ||
681 | CONFIG_INPUT_EVDEV=y | ||
682 | # CONFIG_INPUT_EVBUG is not set | ||
683 | |||
684 | # | ||
685 | # Input Device Drivers | ||
686 | # | ||
687 | # CONFIG_INPUT_KEYBOARD is not set | ||
688 | # CONFIG_INPUT_MOUSE is not set | ||
689 | # CONFIG_INPUT_JOYSTICK is not set | ||
690 | # CONFIG_INPUT_TABLET is not set | ||
691 | CONFIG_INPUT_TOUCHSCREEN=y | ||
692 | # CONFIG_TOUCHSCREEN_GUNZE is not set | ||
693 | # CONFIG_TOUCHSCREEN_ELO is not set | ||
694 | # CONFIG_TOUCHSCREEN_MTOUCH is not set | ||
695 | # CONFIG_TOUCHSCREEN_MK712 is not set | ||
696 | # CONFIG_TOUCHSCREEN_PENMOUNT is not set | ||
697 | # CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set | ||
698 | # CONFIG_TOUCHSCREEN_TOUCHWIN is not set | ||
699 | CONFIG_TOUCHSCREEN_UCB1400=m | ||
700 | # CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set | ||
701 | # CONFIG_INPUT_MISC is not set | ||
702 | |||
703 | # | ||
704 | # Hardware I/O ports | ||
705 | # | ||
706 | # CONFIG_SERIO is not set | ||
707 | # CONFIG_GAMEPORT is not set | ||
708 | |||
709 | # | ||
710 | # Character devices | ||
711 | # | ||
712 | CONFIG_VT=y | ||
713 | CONFIG_VT_CONSOLE=y | ||
714 | CONFIG_HW_CONSOLE=y | ||
715 | # CONFIG_VT_HW_CONSOLE_BINDING is not set | ||
716 | # CONFIG_SERIAL_NONSTANDARD is not set | ||
717 | |||
718 | # | ||
719 | # Serial drivers | ||
720 | # | ||
721 | # CONFIG_SERIAL_8250 is not set | ||
722 | |||
723 | # | ||
724 | # Non-8250 serial port support | ||
725 | # | ||
726 | CONFIG_SERIAL_PXA=y | ||
727 | CONFIG_SERIAL_PXA_CONSOLE=y | ||
728 | CONFIG_SERIAL_CORE=y | ||
729 | CONFIG_SERIAL_CORE_CONSOLE=y | ||
730 | # CONFIG_SERIAL_JSM is not set | ||
731 | CONFIG_UNIX98_PTYS=y | ||
732 | CONFIG_LEGACY_PTYS=y | ||
733 | CONFIG_LEGACY_PTY_COUNT=256 | ||
734 | # CONFIG_IPMI_HANDLER is not set | ||
735 | # CONFIG_WATCHDOG is not set | ||
736 | CONFIG_HW_RANDOM=m | ||
737 | # CONFIG_NVRAM is not set | ||
738 | # CONFIG_R3964 is not set | ||
739 | # CONFIG_APPLICOM is not set | ||
740 | # CONFIG_DRM is not set | ||
741 | # CONFIG_RAW_DRIVER is not set | ||
742 | # CONFIG_TCG_TPM is not set | ||
743 | CONFIG_DEVPORT=y | ||
744 | # CONFIG_I2C is not set | ||
745 | |||
746 | # | ||
747 | # SPI support | ||
748 | # | ||
749 | # CONFIG_SPI is not set | ||
750 | # CONFIG_SPI_MASTER is not set | ||
751 | # CONFIG_W1 is not set | ||
752 | # CONFIG_HWMON is not set | ||
753 | CONFIG_MISC_DEVICES=y | ||
754 | # CONFIG_PHANTOM is not set | ||
755 | # CONFIG_EEPROM_93CX6 is not set | ||
756 | # CONFIG_SGI_IOC4 is not set | ||
757 | # CONFIG_TIFM_CORE is not set | ||
758 | |||
759 | # | ||
760 | # Multifunction device drivers | ||
761 | # | ||
762 | # CONFIG_MFD_SM501 is not set | ||
763 | |||
764 | # | ||
765 | # LED devices | ||
766 | # | ||
767 | CONFIG_NEW_LEDS=y | ||
768 | CONFIG_LEDS_CLASS=y | ||
769 | |||
770 | # | ||
771 | # LED drivers | ||
772 | # | ||
773 | CONFIG_LEDS_CM_X270=y | ||
774 | |||
775 | # | ||
776 | # LED Triggers | ||
777 | # | ||
778 | CONFIG_LEDS_TRIGGERS=y | ||
779 | # CONFIG_LEDS_TRIGGER_TIMER is not set | ||
780 | # CONFIG_LEDS_TRIGGER_IDE_DISK is not set | ||
781 | CONFIG_LEDS_TRIGGER_HEARTBEAT=y | ||
782 | |||
783 | # | ||
784 | # Multimedia devices | ||
785 | # | ||
786 | # CONFIG_VIDEO_DEV is not set | ||
787 | # CONFIG_DVB_CORE is not set | ||
788 | CONFIG_DAB=y | ||
789 | # CONFIG_USB_DABUSB is not set | ||
790 | |||
791 | # | ||
792 | # Graphics support | ||
793 | # | ||
794 | # CONFIG_BACKLIGHT_LCD_SUPPORT is not set | ||
795 | |||
796 | # | ||
797 | # Display device support | ||
798 | # | ||
799 | # CONFIG_DISPLAY_SUPPORT is not set | ||
800 | # CONFIG_VGASTATE is not set | ||
801 | CONFIG_FB=y | ||
802 | # CONFIG_FIRMWARE_EDID is not set | ||
803 | # CONFIG_FB_DDC is not set | ||
804 | CONFIG_FB_CFB_FILLRECT=y | ||
805 | CONFIG_FB_CFB_COPYAREA=y | ||
806 | CONFIG_FB_CFB_IMAGEBLIT=y | ||
807 | # CONFIG_FB_SYS_FILLRECT is not set | ||
808 | # CONFIG_FB_SYS_COPYAREA is not set | ||
809 | # CONFIG_FB_SYS_IMAGEBLIT is not set | ||
810 | # CONFIG_FB_SYS_FOPS is not set | ||
811 | CONFIG_FB_DEFERRED_IO=y | ||
812 | # CONFIG_FB_SVGALIB is not set | ||
813 | # CONFIG_FB_MACMODES is not set | ||
814 | # CONFIG_FB_BACKLIGHT is not set | ||
815 | # CONFIG_FB_MODE_HELPERS is not set | ||
816 | # CONFIG_FB_TILEBLITTING is not set | ||
817 | |||
818 | # | ||
819 | # Frame buffer hardware drivers | ||
820 | # | ||
821 | # CONFIG_FB_CIRRUS is not set | ||
822 | # CONFIG_FB_PM2 is not set | ||
823 | # CONFIG_FB_CYBER2000 is not set | ||
824 | # CONFIG_FB_ASILIANT is not set | ||
825 | # CONFIG_FB_IMSTT is not set | ||
826 | # CONFIG_FB_S1D13XXX is not set | ||
827 | # CONFIG_FB_NVIDIA is not set | ||
828 | # CONFIG_FB_RIVA is not set | ||
829 | # CONFIG_FB_MATROX is not set | ||
830 | # CONFIG_FB_RADEON is not set | ||
831 | # CONFIG_FB_ATY128 is not set | ||
832 | # CONFIG_FB_ATY is not set | ||
833 | # CONFIG_FB_S3 is not set | ||
834 | # CONFIG_FB_SAVAGE is not set | ||
835 | # CONFIG_FB_SIS is not set | ||
836 | # CONFIG_FB_NEOMAGIC is not set | ||
837 | # CONFIG_FB_KYRO is not set | ||
838 | # CONFIG_FB_3DFX is not set | ||
839 | # CONFIG_FB_VOODOO1 is not set | ||
840 | # CONFIG_FB_VT8623 is not set | ||
841 | # CONFIG_FB_TRIDENT is not set | ||
842 | # CONFIG_FB_ARK is not set | ||
843 | # CONFIG_FB_PM3 is not set | ||
844 | CONFIG_FB_PXA=y | ||
845 | # CONFIG_FB_PXA_PARAMETERS is not set | ||
846 | CONFIG_FB_MBX=m | ||
847 | # CONFIG_FB_VIRTUAL is not set | ||
848 | |||
849 | # | ||
850 | # Console display driver support | ||
851 | # | ||
852 | # CONFIG_VGA_CONSOLE is not set | ||
853 | CONFIG_DUMMY_CONSOLE=y | ||
854 | CONFIG_FRAMEBUFFER_CONSOLE=y | ||
855 | # CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set | ||
856 | # CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set | ||
857 | # CONFIG_FONTS is not set | ||
858 | CONFIG_FONT_8x8=y | ||
859 | CONFIG_FONT_8x16=y | ||
860 | CONFIG_LOGO=y | ||
861 | CONFIG_LOGO_LINUX_MONO=y | ||
862 | CONFIG_LOGO_LINUX_VGA16=y | ||
863 | CONFIG_LOGO_LINUX_CLUT224=y | ||
864 | |||
865 | # | ||
866 | # Sound | ||
867 | # | ||
868 | CONFIG_SOUND=m | ||
869 | |||
870 | # | ||
871 | # Advanced Linux Sound Architecture | ||
872 | # | ||
873 | CONFIG_SND=m | ||
874 | CONFIG_SND_TIMER=m | ||
875 | CONFIG_SND_PCM=m | ||
876 | # CONFIG_SND_SEQUENCER is not set | ||
877 | CONFIG_SND_OSSEMUL=y | ||
878 | CONFIG_SND_MIXER_OSS=m | ||
879 | CONFIG_SND_PCM_OSS=m | ||
880 | CONFIG_SND_PCM_OSS_PLUGINS=y | ||
881 | # CONFIG_SND_DYNAMIC_MINORS is not set | ||
882 | CONFIG_SND_SUPPORT_OLD_API=y | ||
883 | CONFIG_SND_VERBOSE_PROCFS=y | ||
884 | # CONFIG_SND_VERBOSE_PRINTK is not set | ||
885 | # CONFIG_SND_DEBUG is not set | ||
886 | |||
887 | # | ||
888 | # Generic devices | ||
889 | # | ||
890 | CONFIG_SND_AC97_CODEC=m | ||
891 | # CONFIG_SND_DUMMY is not set | ||
892 | # CONFIG_SND_MTPAV is not set | ||
893 | # CONFIG_SND_SERIAL_U16550 is not set | ||
894 | # CONFIG_SND_MPU401 is not set | ||
895 | |||
896 | # | ||
897 | # PCI devices | ||
898 | # | ||
899 | # CONFIG_SND_AD1889 is not set | ||
900 | # CONFIG_SND_ALS300 is not set | ||
901 | # CONFIG_SND_ALI5451 is not set | ||
902 | # CONFIG_SND_ATIIXP is not set | ||
903 | # CONFIG_SND_ATIIXP_MODEM is not set | ||
904 | # CONFIG_SND_AU8810 is not set | ||
905 | # CONFIG_SND_AU8820 is not set | ||
906 | # CONFIG_SND_AU8830 is not set | ||
907 | # CONFIG_SND_AZT3328 is not set | ||
908 | # CONFIG_SND_BT87X is not set | ||
909 | # CONFIG_SND_CA0106 is not set | ||
910 | # CONFIG_SND_CMIPCI is not set | ||
911 | # CONFIG_SND_CS4281 is not set | ||
912 | # CONFIG_SND_CS46XX is not set | ||
913 | # CONFIG_SND_DARLA20 is not set | ||
914 | # CONFIG_SND_GINA20 is not set | ||
915 | # CONFIG_SND_LAYLA20 is not set | ||
916 | # CONFIG_SND_DARLA24 is not set | ||
917 | # CONFIG_SND_GINA24 is not set | ||
918 | # CONFIG_SND_LAYLA24 is not set | ||
919 | # CONFIG_SND_MONA is not set | ||
920 | # CONFIG_SND_MIA is not set | ||
921 | # CONFIG_SND_ECHO3G is not set | ||
922 | # CONFIG_SND_INDIGO is not set | ||
923 | # CONFIG_SND_INDIGOIO is not set | ||
924 | # CONFIG_SND_INDIGODJ is not set | ||
925 | # CONFIG_SND_EMU10K1 is not set | ||
926 | # CONFIG_SND_EMU10K1X is not set | ||
927 | # CONFIG_SND_ENS1370 is not set | ||
928 | # CONFIG_SND_ENS1371 is not set | ||
929 | # CONFIG_SND_ES1938 is not set | ||
930 | # CONFIG_SND_ES1968 is not set | ||
931 | # CONFIG_SND_FM801 is not set | ||
932 | # CONFIG_SND_HDA_INTEL is not set | ||
933 | # CONFIG_SND_HDSP is not set | ||
934 | # CONFIG_SND_HDSPM is not set | ||
935 | # CONFIG_SND_ICE1712 is not set | ||
936 | # CONFIG_SND_ICE1724 is not set | ||
937 | # CONFIG_SND_INTEL8X0 is not set | ||
938 | # CONFIG_SND_INTEL8X0M is not set | ||
939 | # CONFIG_SND_KORG1212 is not set | ||
940 | # CONFIG_SND_MAESTRO3 is not set | ||
941 | # CONFIG_SND_MIXART is not set | ||
942 | # CONFIG_SND_NM256 is not set | ||
943 | # CONFIG_SND_PCXHR is not set | ||
944 | # CONFIG_SND_RIPTIDE is not set | ||
945 | # CONFIG_SND_RME32 is not set | ||
946 | # CONFIG_SND_RME96 is not set | ||
947 | # CONFIG_SND_RME9652 is not set | ||
948 | # CONFIG_SND_SONICVIBES is not set | ||
949 | # CONFIG_SND_TRIDENT is not set | ||
950 | # CONFIG_SND_VIA82XX is not set | ||
951 | # CONFIG_SND_VIA82XX_MODEM is not set | ||
952 | # CONFIG_SND_VX222 is not set | ||
953 | # CONFIG_SND_YMFPCI is not set | ||
954 | # CONFIG_SND_AC97_POWER_SAVE is not set | ||
955 | |||
956 | # | ||
957 | # ALSA ARM devices | ||
958 | # | ||
959 | CONFIG_SND_PXA2XX_PCM=m | ||
960 | CONFIG_SND_PXA2XX_AC97=m | ||
961 | |||
962 | # | ||
963 | # USB devices | ||
964 | # | ||
965 | # CONFIG_SND_USB_AUDIO is not set | ||
966 | # CONFIG_SND_USB_CAIAQ is not set | ||
967 | |||
968 | # | ||
969 | # System on Chip audio support | ||
970 | # | ||
971 | # CONFIG_SND_SOC is not set | ||
972 | |||
973 | # | ||
974 | # Open Sound System | ||
975 | # | ||
976 | # CONFIG_SOUND_PRIME is not set | ||
977 | CONFIG_AC97_BUS=m | ||
978 | CONFIG_HID_SUPPORT=y | ||
979 | CONFIG_HID=y | ||
980 | # CONFIG_HID_DEBUG is not set | ||
981 | |||
982 | # | ||
983 | # USB Input Devices | ||
984 | # | ||
985 | CONFIG_USB_HID=y | ||
986 | # CONFIG_USB_HIDINPUT_POWERBOOK is not set | ||
987 | # CONFIG_HID_FF is not set | ||
988 | # CONFIG_USB_HIDDEV is not set | ||
989 | CONFIG_USB_SUPPORT=y | ||
990 | CONFIG_USB_ARCH_HAS_HCD=y | ||
991 | CONFIG_USB_ARCH_HAS_OHCI=y | ||
992 | CONFIG_USB_ARCH_HAS_EHCI=y | ||
993 | CONFIG_USB=y | ||
994 | # CONFIG_USB_DEBUG is not set | ||
995 | |||
996 | # | ||
997 | # Miscellaneous USB options | ||
998 | # | ||
999 | CONFIG_USB_DEVICEFS=y | ||
1000 | # CONFIG_USB_DEVICE_CLASS is not set | ||
1001 | # CONFIG_USB_DYNAMIC_MINORS is not set | ||
1002 | # CONFIG_USB_SUSPEND is not set | ||
1003 | # CONFIG_USB_PERSIST is not set | ||
1004 | # CONFIG_USB_OTG is not set | ||
1005 | |||
1006 | # | ||
1007 | # USB Host Controller Drivers | ||
1008 | # | ||
1009 | # CONFIG_USB_EHCI_HCD is not set | ||
1010 | # CONFIG_USB_ISP116X_HCD is not set | ||
1011 | CONFIG_USB_OHCI_HCD=y | ||
1012 | # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set | ||
1013 | # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set | ||
1014 | CONFIG_USB_OHCI_LITTLE_ENDIAN=y | ||
1015 | # CONFIG_USB_UHCI_HCD is not set | ||
1016 | # CONFIG_USB_SL811_HCD is not set | ||
1017 | # CONFIG_USB_R8A66597_HCD is not set | ||
1018 | |||
1019 | # | ||
1020 | # USB Device Class drivers | ||
1021 | # | ||
1022 | # CONFIG_USB_ACM is not set | ||
1023 | # CONFIG_USB_PRINTER is not set | ||
1024 | |||
1025 | # | ||
1026 | # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' | ||
1027 | # | ||
1028 | |||
1029 | # | ||
1030 | # may also be needed; see USB_STORAGE Help for more information | ||
1031 | # | ||
1032 | CONFIG_USB_STORAGE=y | ||
1033 | # CONFIG_USB_STORAGE_DEBUG is not set | ||
1034 | # CONFIG_USB_STORAGE_DATAFAB is not set | ||
1035 | # CONFIG_USB_STORAGE_FREECOM is not set | ||
1036 | # CONFIG_USB_STORAGE_DPCM is not set | ||
1037 | # CONFIG_USB_STORAGE_USBAT is not set | ||
1038 | # CONFIG_USB_STORAGE_SDDR09 is not set | ||
1039 | # CONFIG_USB_STORAGE_SDDR55 is not set | ||
1040 | # CONFIG_USB_STORAGE_JUMPSHOT is not set | ||
1041 | # CONFIG_USB_STORAGE_ALAUDA is not set | ||
1042 | # CONFIG_USB_STORAGE_KARMA is not set | ||
1043 | # CONFIG_USB_LIBUSUAL is not set | ||
1044 | |||
1045 | # | ||
1046 | # USB Imaging devices | ||
1047 | # | ||
1048 | # CONFIG_USB_MDC800 is not set | ||
1049 | # CONFIG_USB_MICROTEK is not set | ||
1050 | CONFIG_USB_MON=y | ||
1051 | |||
1052 | # | ||
1053 | # USB port drivers | ||
1054 | # | ||
1055 | |||
1056 | # | ||
1057 | # USB Serial Converter support | ||
1058 | # | ||
1059 | # CONFIG_USB_SERIAL is not set | ||
1060 | |||
1061 | # | ||
1062 | # USB Miscellaneous drivers | ||
1063 | # | ||
1064 | # CONFIG_USB_EMI62 is not set | ||
1065 | # CONFIG_USB_EMI26 is not set | ||
1066 | # CONFIG_USB_ADUTUX is not set | ||
1067 | # CONFIG_USB_AUERSWALD is not set | ||
1068 | # CONFIG_USB_RIO500 is not set | ||
1069 | # CONFIG_USB_LEGOTOWER is not set | ||
1070 | # CONFIG_USB_LCD is not set | ||
1071 | # CONFIG_USB_BERRY_CHARGE is not set | ||
1072 | # CONFIG_USB_LED is not set | ||
1073 | # CONFIG_USB_CYPRESS_CY7C63 is not set | ||
1074 | # CONFIG_USB_CYTHERM is not set | ||
1075 | # CONFIG_USB_PHIDGET is not set | ||
1076 | # CONFIG_USB_IDMOUSE is not set | ||
1077 | # CONFIG_USB_FTDI_ELAN is not set | ||
1078 | # CONFIG_USB_APPLEDISPLAY is not set | ||
1079 | # CONFIG_USB_LD is not set | ||
1080 | # CONFIG_USB_TRANCEVIBRATOR is not set | ||
1081 | # CONFIG_USB_IOWARRIOR is not set | ||
1082 | # CONFIG_USB_TEST is not set | ||
1083 | |||
1084 | # | ||
1085 | # USB DSL modem support | ||
1086 | # | ||
1087 | |||
1088 | # | ||
1089 | # USB Gadget Support | ||
1090 | # | ||
1091 | # CONFIG_USB_GADGET is not set | ||
1092 | CONFIG_MMC=m | ||
1093 | # CONFIG_MMC_DEBUG is not set | ||
1094 | # CONFIG_MMC_UNSAFE_RESUME is not set | ||
1095 | |||
1096 | # | ||
1097 | # MMC/SD Card Drivers | ||
1098 | # | ||
1099 | CONFIG_MMC_BLOCK=m | ||
1100 | CONFIG_MMC_BLOCK_BOUNCE=y | ||
1101 | |||
1102 | # | ||
1103 | # MMC/SD Host Controller Drivers | ||
1104 | # | ||
1105 | CONFIG_MMC_PXA=m | ||
1106 | # CONFIG_MMC_SDHCI is not set | ||
1107 | # CONFIG_MMC_TIFM_SD is not set | ||
1108 | |||
1109 | # | ||
1110 | # Real Time Clock | ||
1111 | # | ||
1112 | CONFIG_RTC_LIB=y | ||
1113 | CONFIG_RTC_CLASS=y | ||
1114 | CONFIG_RTC_HCTOSYS=y | ||
1115 | CONFIG_RTC_HCTOSYS_DEVICE="rtc0" | ||
1116 | # CONFIG_RTC_DEBUG is not set | ||
1117 | |||
1118 | # | ||
1119 | # RTC interfaces | ||
1120 | # | ||
1121 | CONFIG_RTC_INTF_SYSFS=y | ||
1122 | CONFIG_RTC_INTF_PROC=y | ||
1123 | CONFIG_RTC_INTF_DEV=y | ||
1124 | # CONFIG_RTC_INTF_DEV_UIE_EMUL is not set | ||
1125 | # CONFIG_RTC_DRV_TEST is not set | ||
1126 | |||
1127 | # | ||
1128 | # Platform RTC drivers | ||
1129 | # | ||
1130 | # CONFIG_RTC_DRV_CMOS is not set | ||
1131 | # CONFIG_RTC_DRV_DS1553 is not set | ||
1132 | # CONFIG_RTC_DRV_DS1742 is not set | ||
1133 | # CONFIG_RTC_DRV_M48T86 is not set | ||
1134 | # CONFIG_RTC_DRV_M48T59 is not set | ||
1135 | CONFIG_RTC_DRV_V3020=y | ||
1136 | |||
1137 | # | ||
1138 | # on-CPU RTC drivers | ||
1139 | # | ||
1140 | CONFIG_RTC_DRV_SA1100=y | ||
1141 | |||
1142 | # | ||
1143 | # DMA Engine support | ||
1144 | # | ||
1145 | # CONFIG_DMA_ENGINE is not set | ||
1146 | |||
1147 | # | ||
1148 | # DMA Clients | ||
1149 | # | ||
1150 | |||
1151 | # | ||
1152 | # DMA Devices | ||
1153 | # | ||
1154 | |||
1155 | # | ||
1156 | # File systems | ||
1157 | # | ||
1158 | CONFIG_EXT2_FS=y | ||
1159 | # CONFIG_EXT2_FS_XATTR is not set | ||
1160 | # CONFIG_EXT2_FS_XIP is not set | ||
1161 | CONFIG_EXT3_FS=y | ||
1162 | CONFIG_EXT3_FS_XATTR=y | ||
1163 | # CONFIG_EXT3_FS_POSIX_ACL is not set | ||
1164 | # CONFIG_EXT3_FS_SECURITY is not set | ||
1165 | # CONFIG_EXT4DEV_FS is not set | ||
1166 | CONFIG_JBD=y | ||
1167 | # CONFIG_JBD_DEBUG is not set | ||
1168 | CONFIG_FS_MBCACHE=y | ||
1169 | # CONFIG_REISERFS_FS is not set | ||
1170 | # CONFIG_JFS_FS is not set | ||
1171 | # CONFIG_FS_POSIX_ACL is not set | ||
1172 | # CONFIG_XFS_FS is not set | ||
1173 | # CONFIG_GFS2_FS is not set | ||
1174 | # CONFIG_OCFS2_FS is not set | ||
1175 | # CONFIG_MINIX_FS is not set | ||
1176 | # CONFIG_ROMFS_FS is not set | ||
1177 | CONFIG_INOTIFY=y | ||
1178 | CONFIG_INOTIFY_USER=y | ||
1179 | # CONFIG_QUOTA is not set | ||
1180 | CONFIG_DNOTIFY=y | ||
1181 | # CONFIG_AUTOFS_FS is not set | ||
1182 | # CONFIG_AUTOFS4_FS is not set | ||
1183 | # CONFIG_FUSE_FS is not set | ||
1184 | |||
1185 | # | ||
1186 | # CD-ROM/DVD Filesystems | ||
1187 | # | ||
1188 | # CONFIG_ISO9660_FS is not set | ||
1189 | # CONFIG_UDF_FS is not set | ||
1190 | |||
1191 | # | ||
1192 | # DOS/FAT/NT Filesystems | ||
1193 | # | ||
1194 | CONFIG_FAT_FS=y | ||
1195 | CONFIG_MSDOS_FS=y | ||
1196 | CONFIG_VFAT_FS=y | ||
1197 | CONFIG_FAT_DEFAULT_CODEPAGE=437 | ||
1198 | CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" | ||
1199 | # CONFIG_NTFS_FS is not set | ||
1200 | |||
1201 | # | ||
1202 | # Pseudo filesystems | ||
1203 | # | ||
1204 | CONFIG_PROC_FS=y | ||
1205 | CONFIG_PROC_SYSCTL=y | ||
1206 | CONFIG_SYSFS=y | ||
1207 | CONFIG_TMPFS=y | ||
1208 | # CONFIG_TMPFS_POSIX_ACL is not set | ||
1209 | # CONFIG_HUGETLB_PAGE is not set | ||
1210 | CONFIG_RAMFS=y | ||
1211 | # CONFIG_CONFIGFS_FS is not set | ||
1212 | |||
1213 | # | ||
1214 | # Miscellaneous filesystems | ||
1215 | # | ||
1216 | # CONFIG_ADFS_FS is not set | ||
1217 | # CONFIG_AFFS_FS is not set | ||
1218 | # CONFIG_HFS_FS is not set | ||
1219 | # CONFIG_HFSPLUS_FS is not set | ||
1220 | # CONFIG_BEFS_FS is not set | ||
1221 | # CONFIG_BFS_FS is not set | ||
1222 | # CONFIG_EFS_FS is not set | ||
1223 | # CONFIG_JFFS2_FS is not set | ||
1224 | # CONFIG_CRAMFS is not set | ||
1225 | # CONFIG_VXFS_FS is not set | ||
1226 | # CONFIG_HPFS_FS is not set | ||
1227 | # CONFIG_QNX4FS_FS is not set | ||
1228 | # CONFIG_SYSV_FS is not set | ||
1229 | # CONFIG_UFS_FS is not set | ||
1230 | |||
1231 | # | ||
1232 | # Network File Systems | ||
1233 | # | ||
1234 | CONFIG_NFS_FS=y | ||
1235 | CONFIG_NFS_V3=y | ||
1236 | # CONFIG_NFS_V3_ACL is not set | ||
1237 | # CONFIG_NFS_V4 is not set | ||
1238 | # CONFIG_NFS_DIRECTIO is not set | ||
1239 | # CONFIG_NFSD is not set | ||
1240 | CONFIG_ROOT_NFS=y | ||
1241 | CONFIG_LOCKD=y | ||
1242 | CONFIG_LOCKD_V4=y | ||
1243 | CONFIG_NFS_COMMON=y | ||
1244 | CONFIG_SUNRPC=y | ||
1245 | # CONFIG_SUNRPC_BIND34 is not set | ||
1246 | # CONFIG_RPCSEC_GSS_KRB5 is not set | ||
1247 | # CONFIG_RPCSEC_GSS_SPKM3 is not set | ||
1248 | CONFIG_SMB_FS=y | ||
1249 | # CONFIG_SMB_NLS_DEFAULT is not set | ||
1250 | # CONFIG_CIFS is not set | ||
1251 | # CONFIG_NCP_FS is not set | ||
1252 | # CONFIG_CODA_FS is not set | ||
1253 | # CONFIG_AFS_FS is not set | ||
1254 | |||
1255 | # | ||
1256 | # Partition Types | ||
1257 | # | ||
1258 | # CONFIG_PARTITION_ADVANCED is not set | ||
1259 | CONFIG_MSDOS_PARTITION=y | ||
1260 | |||
1261 | # | ||
1262 | # Native Language Support | ||
1263 | # | ||
1264 | CONFIG_NLS=y | ||
1265 | CONFIG_NLS_DEFAULT="iso8859-1" | ||
1266 | CONFIG_NLS_CODEPAGE_437=y | ||
1267 | # CONFIG_NLS_CODEPAGE_737 is not set | ||
1268 | # CONFIG_NLS_CODEPAGE_775 is not set | ||
1269 | # CONFIG_NLS_CODEPAGE_850 is not set | ||
1270 | # CONFIG_NLS_CODEPAGE_852 is not set | ||
1271 | # CONFIG_NLS_CODEPAGE_855 is not set | ||
1272 | # CONFIG_NLS_CODEPAGE_857 is not set | ||
1273 | # CONFIG_NLS_CODEPAGE_860 is not set | ||
1274 | # CONFIG_NLS_CODEPAGE_861 is not set | ||
1275 | # CONFIG_NLS_CODEPAGE_862 is not set | ||
1276 | # CONFIG_NLS_CODEPAGE_863 is not set | ||
1277 | # CONFIG_NLS_CODEPAGE_864 is not set | ||
1278 | # CONFIG_NLS_CODEPAGE_865 is not set | ||
1279 | # CONFIG_NLS_CODEPAGE_866 is not set | ||
1280 | # CONFIG_NLS_CODEPAGE_869 is not set | ||
1281 | # CONFIG_NLS_CODEPAGE_936 is not set | ||
1282 | # CONFIG_NLS_CODEPAGE_950 is not set | ||
1283 | # CONFIG_NLS_CODEPAGE_932 is not set | ||
1284 | # CONFIG_NLS_CODEPAGE_949 is not set | ||
1285 | # CONFIG_NLS_CODEPAGE_874 is not set | ||
1286 | # CONFIG_NLS_ISO8859_8 is not set | ||
1287 | # CONFIG_NLS_CODEPAGE_1250 is not set | ||
1288 | # CONFIG_NLS_CODEPAGE_1251 is not set | ||
1289 | # CONFIG_NLS_ASCII is not set | ||
1290 | CONFIG_NLS_ISO8859_1=y | ||
1291 | # CONFIG_NLS_ISO8859_2 is not set | ||
1292 | # CONFIG_NLS_ISO8859_3 is not set | ||
1293 | # CONFIG_NLS_ISO8859_4 is not set | ||
1294 | # CONFIG_NLS_ISO8859_5 is not set | ||
1295 | # CONFIG_NLS_ISO8859_6 is not set | ||
1296 | # CONFIG_NLS_ISO8859_7 is not set | ||
1297 | # CONFIG_NLS_ISO8859_9 is not set | ||
1298 | # CONFIG_NLS_ISO8859_13 is not set | ||
1299 | # CONFIG_NLS_ISO8859_14 is not set | ||
1300 | # CONFIG_NLS_ISO8859_15 is not set | ||
1301 | # CONFIG_NLS_KOI8_R is not set | ||
1302 | # CONFIG_NLS_KOI8_U is not set | ||
1303 | # CONFIG_NLS_UTF8 is not set | ||
1304 | |||
1305 | # | ||
1306 | # Distributed Lock Manager | ||
1307 | # | ||
1308 | # CONFIG_DLM is not set | ||
1309 | |||
1310 | # | ||
1311 | # Profiling support | ||
1312 | # | ||
1313 | # CONFIG_PROFILING is not set | ||
1314 | |||
1315 | # | ||
1316 | # Kernel hacking | ||
1317 | # | ||
1318 | # CONFIG_PRINTK_TIME is not set | ||
1319 | CONFIG_ENABLE_MUST_CHECK=y | ||
1320 | CONFIG_MAGIC_SYSRQ=y | ||
1321 | # CONFIG_UNUSED_SYMBOLS is not set | ||
1322 | # CONFIG_DEBUG_FS is not set | ||
1323 | # CONFIG_HEADERS_CHECK is not set | ||
1324 | CONFIG_DEBUG_KERNEL=y | ||
1325 | # CONFIG_DEBUG_SHIRQ is not set | ||
1326 | # CONFIG_DETECT_SOFTLOCKUP is not set | ||
1327 | CONFIG_SCHED_DEBUG=y | ||
1328 | # CONFIG_SCHEDSTATS is not set | ||
1329 | # CONFIG_TIMER_STATS is not set | ||
1330 | # CONFIG_DEBUG_SLAB is not set | ||
1331 | # CONFIG_DEBUG_RT_MUTEXES is not set | ||
1332 | # CONFIG_RT_MUTEX_TESTER is not set | ||
1333 | # CONFIG_DEBUG_SPINLOCK is not set | ||
1334 | # CONFIG_DEBUG_MUTEXES is not set | ||
1335 | # CONFIG_DEBUG_LOCK_ALLOC is not set | ||
1336 | # CONFIG_PROVE_LOCKING is not set | ||
1337 | # CONFIG_DEBUG_SPINLOCK_SLEEP is not set | ||
1338 | # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set | ||
1339 | # CONFIG_DEBUG_KOBJECT is not set | ||
1340 | # CONFIG_DEBUG_BUGVERBOSE is not set | ||
1341 | CONFIG_DEBUG_INFO=y | ||
1342 | # CONFIG_DEBUG_VM is not set | ||
1343 | # CONFIG_DEBUG_LIST is not set | ||
1344 | CONFIG_FRAME_POINTER=y | ||
1345 | CONFIG_FORCED_INLINING=y | ||
1346 | # CONFIG_RCU_TORTURE_TEST is not set | ||
1347 | # CONFIG_FAULT_INJECTION is not set | ||
1348 | CONFIG_DEBUG_USER=y | ||
1349 | CONFIG_DEBUG_ERRORS=y | ||
1350 | CONFIG_DEBUG_LL=y | ||
1351 | # CONFIG_DEBUG_ICEDCC is not set | ||
1352 | |||
1353 | # | ||
1354 | # Security options | ||
1355 | # | ||
1356 | # CONFIG_KEYS is not set | ||
1357 | # CONFIG_SECURITY is not set | ||
1358 | CONFIG_CRYPTO=y | ||
1359 | CONFIG_CRYPTO_ALGAPI=m | ||
1360 | CONFIG_CRYPTO_BLKCIPHER=m | ||
1361 | CONFIG_CRYPTO_MANAGER=m | ||
1362 | # CONFIG_CRYPTO_HMAC is not set | ||
1363 | # CONFIG_CRYPTO_XCBC is not set | ||
1364 | # CONFIG_CRYPTO_NULL is not set | ||
1365 | # CONFIG_CRYPTO_MD4 is not set | ||
1366 | # CONFIG_CRYPTO_MD5 is not set | ||
1367 | # CONFIG_CRYPTO_SHA1 is not set | ||
1368 | # CONFIG_CRYPTO_SHA256 is not set | ||
1369 | # CONFIG_CRYPTO_SHA512 is not set | ||
1370 | # CONFIG_CRYPTO_WP512 is not set | ||
1371 | # CONFIG_CRYPTO_TGR192 is not set | ||
1372 | # CONFIG_CRYPTO_GF128MUL is not set | ||
1373 | CONFIG_CRYPTO_ECB=m | ||
1374 | CONFIG_CRYPTO_CBC=m | ||
1375 | CONFIG_CRYPTO_PCBC=m | ||
1376 | # CONFIG_CRYPTO_LRW is not set | ||
1377 | # CONFIG_CRYPTO_CRYPTD is not set | ||
1378 | # CONFIG_CRYPTO_DES is not set | ||
1379 | # CONFIG_CRYPTO_FCRYPT is not set | ||
1380 | # CONFIG_CRYPTO_BLOWFISH is not set | ||
1381 | # CONFIG_CRYPTO_TWOFISH is not set | ||
1382 | # CONFIG_CRYPTO_SERPENT is not set | ||
1383 | CONFIG_CRYPTO_AES=m | ||
1384 | # CONFIG_CRYPTO_CAST5 is not set | ||
1385 | # CONFIG_CRYPTO_CAST6 is not set | ||
1386 | # CONFIG_CRYPTO_TEA is not set | ||
1387 | CONFIG_CRYPTO_ARC4=m | ||
1388 | # CONFIG_CRYPTO_KHAZAD is not set | ||
1389 | # CONFIG_CRYPTO_ANUBIS is not set | ||
1390 | # CONFIG_CRYPTO_DEFLATE is not set | ||
1391 | # CONFIG_CRYPTO_MICHAEL_MIC is not set | ||
1392 | # CONFIG_CRYPTO_CRC32C is not set | ||
1393 | # CONFIG_CRYPTO_CAMELLIA is not set | ||
1394 | # CONFIG_CRYPTO_TEST is not set | ||
1395 | CONFIG_CRYPTO_HW=y | ||
1396 | |||
1397 | # | ||
1398 | # Library routines | ||
1399 | # | ||
1400 | CONFIG_BITREVERSE=y | ||
1401 | # CONFIG_CRC_CCITT is not set | ||
1402 | # CONFIG_CRC16 is not set | ||
1403 | # CONFIG_CRC_ITU_T is not set | ||
1404 | CONFIG_CRC32=y | ||
1405 | # CONFIG_CRC7 is not set | ||
1406 | # CONFIG_LIBCRC32C is not set | ||
1407 | CONFIG_PLIST=y | ||
1408 | CONFIG_HAS_IOMEM=y | ||
1409 | CONFIG_HAS_IOPORT=y | ||
1410 | CONFIG_HAS_DMA=y | ||
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig index e895188cadcd..656d49661a29 100644 --- a/arch/arm/mach-pxa/Kconfig +++ b/arch/arm/mach-pxa/Kconfig | |||
@@ -63,6 +63,11 @@ config MACH_ZYLONITE | |||
63 | bool "PXA3xx Development Platform" | 63 | bool "PXA3xx Development Platform" |
64 | select PXA3xx | 64 | select PXA3xx |
65 | 65 | ||
66 | config MACH_ARMCORE | ||
67 | bool "CompuLab CM-X270 modules" | ||
68 | select PXA27x | ||
69 | select IWMMXT | ||
70 | |||
66 | endchoice | 71 | endchoice |
67 | 72 | ||
68 | if PXA_SHARPSL | 73 | if PXA_SHARPSL |
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile index bfdd0c5fcd7a..4263527e5123 100644 --- a/arch/arm/mach-pxa/Makefile +++ b/arch/arm/mach-pxa/Makefile | |||
@@ -29,6 +29,8 @@ ifeq ($(CONFIG_MACH_ZYLONITE),y) | |||
29 | obj-$(CONFIG_CPU_PXA320) += zylonite_pxa320.o | 29 | obj-$(CONFIG_CPU_PXA320) += zylonite_pxa320.o |
30 | endif | 30 | endif |
31 | 31 | ||
32 | obj-$(CONFIG_MACH_ARMCORE) += cm-x270.o | ||
33 | |||
32 | # Support for blinky lights | 34 | # Support for blinky lights |
33 | led-y := leds.o | 35 | led-y := leds.o |
34 | led-$(CONFIG_ARCH_LUBBOCK) += leds-lubbock.o | 36 | led-$(CONFIG_ARCH_LUBBOCK) += leds-lubbock.o |
@@ -45,3 +47,7 @@ obj-$(CONFIG_PXA_SSP) += ssp.o | |||
45 | ifeq ($(CONFIG_PXA27x),y) | 47 | ifeq ($(CONFIG_PXA27x),y) |
46 | obj-$(CONFIG_PM) += standby.o | 48 | obj-$(CONFIG_PM) += standby.o |
47 | endif | 49 | endif |
50 | |||
51 | ifeq ($(CONFIG_PCI),y) | ||
52 | obj-$(CONFIG_MACH_ARMCORE) += cm-x270-pci.o | ||
53 | endif | ||
diff --git a/arch/arm/mach-pxa/cm-x270-pci.c b/arch/arm/mach-pxa/cm-x270-pci.c new file mode 100644 index 000000000000..878d3b9b8633 --- /dev/null +++ b/arch/arm/mach-pxa/cm-x270-pci.c | |||
@@ -0,0 +1,218 @@ | |||
1 | /* | ||
2 | * linux/arch/arm/mach-pxa/cm-x270-pci.c | ||
3 | * | ||
4 | * PCI bios-type initialisation for PCI machines | ||
5 | * | ||
6 | * Bits taken from various places. | ||
7 | * | ||
8 | * Copyright (C) 2007 Compulab, Ltd. | ||
9 | * Mike Rapoport <mike@compulab.co.il> | ||
10 | * | ||
11 | * This program is free software; you can redistribute it and/or modify | ||
12 | * it under the terms of the GNU General Public License version 2 as | ||
13 | * published by the Free Software Foundation. | ||
14 | */ | ||
15 | |||
16 | #include <linux/kernel.h> | ||
17 | #include <linux/pci.h> | ||
18 | #include <linux/init.h> | ||
19 | #include <linux/device.h> | ||
20 | #include <linux/platform_device.h> | ||
21 | #include <linux/irq.h> | ||
22 | |||
23 | #include <asm/mach/pci.h> | ||
24 | #include <asm/arch/cm-x270.h> | ||
25 | #include <asm/arch/pxa-regs.h> | ||
26 | #include <asm/mach-types.h> | ||
27 | |||
28 | #include <asm/hardware/it8152.h> | ||
29 | |||
30 | unsigned long it8152_base_address = CMX270_IT8152_VIRT; | ||
31 | |||
32 | /* | ||
33 | * Only first 64MB of memory can be accessed via PCI. | ||
34 | * We use GFP_DMA to allocate safe buffers to do map/unmap. | ||
35 | * This is really ugly and we need a better way of specifying | ||
36 | * DMA-capable regions of memory. | ||
37 | */ | ||
38 | void __init cmx270_pci_adjust_zones(int node, unsigned long *zone_size, | ||
39 | unsigned long *zhole_size) | ||
40 | { | ||
41 | unsigned int sz = SZ_64M >> PAGE_SHIFT; | ||
42 | |||
43 | printk(KERN_INFO "Adjusting zones for CM-x270\n"); | ||
44 | |||
45 | /* | ||
46 | * Only adjust if > 64M on current system | ||
47 | */ | ||
48 | if (node || (zone_size[0] <= sz)) | ||
49 | return; | ||
50 | |||
51 | zone_size[1] = zone_size[0] - sz; | ||
52 | zone_size[0] = sz; | ||
53 | zhole_size[1] = zhole_size[0]; | ||
54 | zhole_size[0] = 0; | ||
55 | } | ||
56 | |||
57 | static void cmx270_it8152_irq_demux(unsigned int irq, struct irq_desc *desc) | ||
58 | { | ||
59 | /* clear our parent irq */ | ||
60 | GEDR(GPIO_IT8152_IRQ) = GPIO_bit(GPIO_IT8152_IRQ); | ||
61 | |||
62 | it8152_irq_demux(irq, desc); | ||
63 | } | ||
64 | |||
65 | void __cmx270_pci_init_irq(void) | ||
66 | { | ||
67 | it8152_init_irq(); | ||
68 | pxa_gpio_mode(IRQ_TO_GPIO(GPIO_IT8152_IRQ)); | ||
69 | set_irq_type(IRQ_GPIO(GPIO_IT8152_IRQ), IRQT_RISING); | ||
70 | |||
71 | set_irq_chained_handler(IRQ_GPIO(GPIO_IT8152_IRQ), | ||
72 | cmx270_it8152_irq_demux); | ||
73 | } | ||
74 | |||
75 | #ifdef CONFIG_PM | ||
76 | static unsigned long sleep_save_ite[10]; | ||
77 | |||
78 | void __cmx270_pci_suspend(void) | ||
79 | { | ||
80 | /* save ITE state */ | ||
81 | sleep_save_ite[0] = __raw_readl(IT8152_INTC_PDCNIMR); | ||
82 | sleep_save_ite[1] = __raw_readl(IT8152_INTC_LPCNIMR); | ||
83 | sleep_save_ite[2] = __raw_readl(IT8152_INTC_LPNIAR); | ||
84 | |||
85 | /* Clear ITE IRQ's */ | ||
86 | __raw_writel((0), IT8152_INTC_PDCNIRR); | ||
87 | __raw_writel((0), IT8152_INTC_LPCNIRR); | ||
88 | } | ||
89 | |||
90 | void __cmx270_pci_resume(void) | ||
91 | { | ||
92 | /* restore IT8152 state */ | ||
93 | __raw_writel((sleep_save_ite[0]), IT8152_INTC_PDCNIMR); | ||
94 | __raw_writel((sleep_save_ite[1]), IT8152_INTC_LPCNIMR); | ||
95 | __raw_writel((sleep_save_ite[2]), IT8152_INTC_LPNIAR); | ||
96 | } | ||
97 | #else | ||
98 | void cmx270_pci_suspend(void) {} | ||
99 | void cmx270_pci_resume(void) {} | ||
100 | #endif | ||
101 | |||
102 | /* PCI IRQ mapping*/ | ||
103 | static int __init cmx270_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) | ||
104 | { | ||
105 | int irq; | ||
106 | |||
107 | printk(KERN_DEBUG "===> %s: %s slot=%x, pin=%x\n", __FUNCTION__, | ||
108 | pci_name(dev), slot, pin); | ||
109 | |||
110 | irq = it8152_pci_map_irq(dev, slot, pin); | ||
111 | if (irq) | ||
112 | return irq; | ||
113 | |||
114 | /* | ||
115 | Here comes the ugly part. The routing is baseboard specific, | ||
116 | but defining a platform for each possible base of CM-x270 is | ||
117 | unrealistic. Here we keep mapping for ATXBase and SB-x270. | ||
118 | */ | ||
119 | /* ATXBASE PCI slot */ | ||
120 | if (slot == 7) | ||
121 | return IT8152_PCI_INTA; | ||
122 | |||
123 | /* ATXBase/SB-x270 CardBus */ | ||
124 | if (slot == 8 || slot == 0) | ||
125 | return IT8152_PCI_INTB; | ||
126 | |||
127 | /* ATXBase Ethernet */ | ||
128 | if (slot == 9) | ||
129 | return IT8152_PCI_INTA; | ||
130 | |||
131 | /* SB-x270 Ethernet */ | ||
132 | if (slot == 16) | ||
133 | return IT8152_PCI_INTA; | ||
134 | |||
135 | /* PC104+ interrupt routing */ | ||
136 | if ((slot == 17) || (slot == 19)) | ||
137 | return IT8152_PCI_INTA; | ||
138 | if ((slot == 18) || (slot == 20)) | ||
139 | return IT8152_PCI_INTB; | ||
140 | |||
141 | return(0); | ||
142 | } | ||
143 | |||
144 | static struct pci_bus * __init | ||
145 | cmx270_pci_scan_bus(int nr, struct pci_sys_data *sys) | ||
146 | { | ||
147 | printk(KERN_INFO "Initializing CM-X270 PCI subsystem\n"); | ||
148 | |||
149 | __raw_writel(0x800, IT8152_PCI_CFG_ADDR); | ||
150 | if (__raw_readl(IT8152_PCI_CFG_DATA) == 0x81521283) { | ||
151 | printk(KERN_INFO "PCI Bridge found.\n"); | ||
152 | |||
153 | /* set PCI I/O base at 0 */ | ||
154 | writel(0x848, IT8152_PCI_CFG_ADDR); | ||
155 | writel(0, IT8152_PCI_CFG_DATA); | ||
156 | |||
157 | /* set PCI memory base at 0 */ | ||
158 | writel(0x840, IT8152_PCI_CFG_ADDR); | ||
159 | writel(0, IT8152_PCI_CFG_DATA); | ||
160 | |||
161 | writel(0x20, IT8152_GPIO_GPDR); | ||
162 | |||
163 | /* CardBus Controller on ATXbase baseboard */ | ||
164 | writel(0x4000, IT8152_PCI_CFG_ADDR); | ||
165 | if (readl(IT8152_PCI_CFG_DATA) == 0xAC51104C) { | ||
166 | printk(KERN_INFO "CardBus Bridge found.\n"); | ||
167 | |||
168 | /* Configure socket 0 */ | ||
169 | writel(0x408C, IT8152_PCI_CFG_ADDR); | ||
170 | writel(0x1022, IT8152_PCI_CFG_DATA); | ||
171 | |||
172 | writel(0x4080, IT8152_PCI_CFG_ADDR); | ||
173 | writel(0x3844d060, IT8152_PCI_CFG_DATA); | ||
174 | |||
175 | writel(0x4090, IT8152_PCI_CFG_ADDR); | ||
176 | writel(((readl(IT8152_PCI_CFG_DATA) & 0xffff) | | ||
177 | 0x60440000), | ||
178 | IT8152_PCI_CFG_DATA); | ||
179 | |||
180 | writel(0x4018, IT8152_PCI_CFG_ADDR); | ||
181 | writel(0xb0000000, IT8152_PCI_CFG_DATA); | ||
182 | |||
183 | /* Configure socket 1 */ | ||
184 | writel(0x418C, IT8152_PCI_CFG_ADDR); | ||
185 | writel(0x1022, IT8152_PCI_CFG_DATA); | ||
186 | |||
187 | writel(0x4180, IT8152_PCI_CFG_ADDR); | ||
188 | writel(0x3844d060, IT8152_PCI_CFG_DATA); | ||
189 | |||
190 | writel(0x4190, IT8152_PCI_CFG_ADDR); | ||
191 | writel(((readl(IT8152_PCI_CFG_DATA) & 0xffff) | | ||
192 | 0x60440000), | ||
193 | IT8152_PCI_CFG_DATA); | ||
194 | |||
195 | writel(0x4118, IT8152_PCI_CFG_ADDR); | ||
196 | writel(0xb0000000, IT8152_PCI_CFG_DATA); | ||
197 | } | ||
198 | } | ||
199 | return it8152_pci_scan_bus(nr, sys); | ||
200 | } | ||
201 | |||
202 | static struct hw_pci cmx270_pci __initdata = { | ||
203 | .swizzle = pci_std_swizzle, | ||
204 | .map_irq = cmx270_pci_map_irq, | ||
205 | .nr_controllers = 1, | ||
206 | .setup = it8152_pci_setup, | ||
207 | .scan = cmx270_pci_scan_bus, | ||
208 | }; | ||
209 | |||
210 | static int __init cmx270_init_pci(void) | ||
211 | { | ||
212 | if (machine_is_armcore()) | ||
213 | pci_common_init(&cmx270_pci); | ||
214 | |||
215 | return 0; | ||
216 | } | ||
217 | |||
218 | subsys_initcall(cmx270_init_pci); | ||
diff --git a/arch/arm/mach-pxa/cm-x270-pci.h b/arch/arm/mach-pxa/cm-x270-pci.h new file mode 100644 index 000000000000..ffe37b66f9a0 --- /dev/null +++ b/arch/arm/mach-pxa/cm-x270-pci.h | |||
@@ -0,0 +1,13 @@ | |||
1 | extern void __cmx270_pci_init_irq(void); | ||
2 | extern void __cmx270_pci_suspend(void); | ||
3 | extern void __cmx270_pci_resume(void); | ||
4 | |||
5 | #ifdef CONFIG_PCI | ||
6 | #define cmx270_pci_init_irq __cmx270_pci_init_irq | ||
7 | #define cmx270_pci_suspend __cmx270_pci_suspend | ||
8 | #define cmx270_pci_resume __cmx270_pci_resume | ||
9 | #else | ||
10 | #define cmx270_pci_init_irq() do {} while (0) | ||
11 | #define cmx270_pci_suspend() do {} while (0) | ||
12 | #define cmx270_pci_resume() do {} while (0) | ||
13 | #endif | ||
diff --git a/arch/arm/mach-pxa/cm-x270.c b/arch/arm/mach-pxa/cm-x270.c new file mode 100644 index 000000000000..177664ccb2e2 --- /dev/null +++ b/arch/arm/mach-pxa/cm-x270.c | |||
@@ -0,0 +1,645 @@ | |||
1 | /* | ||
2 | * linux/arch/arm/mach-pxa/cm-x270.c | ||
3 | * | ||
4 | * Copyright (C) 2007 CompuLab, Ltd. | ||
5 | * Mike Rapoport <mike@compulab.co.il> | ||
6 | * | ||
7 | * This program is free software; you can redistribute it and/or modify | ||
8 | * it under the terms of the GNU General Public License version 2 as | ||
9 | * published by the Free Software Foundation. | ||
10 | */ | ||
11 | |||
12 | #include <linux/types.h> | ||
13 | #include <linux/pm.h> | ||
14 | #include <linux/fb.h> | ||
15 | #include <linux/platform_device.h> | ||
16 | #include <linux/irq.h> | ||
17 | #include <linux/sysdev.h> | ||
18 | #include <linux/io.h> | ||
19 | #include <linux/delay.h> | ||
20 | |||
21 | #include <linux/dm9000.h> | ||
22 | #include <linux/rtc-v3020.h> | ||
23 | #include <linux/serial_8250.h> | ||
24 | |||
25 | #include <video/mbxfb.h> | ||
26 | |||
27 | #include <asm/mach/arch.h> | ||
28 | #include <asm/mach-types.h> | ||
29 | #include <asm/mach/map.h> | ||
30 | |||
31 | #include <asm/arch/pxa-regs.h> | ||
32 | #include <asm/arch/pxafb.h> | ||
33 | #include <asm/arch/ohci.h> | ||
34 | #include <asm/arch/mmc.h> | ||
35 | #include <asm/arch/bitfield.h> | ||
36 | #include <asm/arch/cm-x270.h> | ||
37 | |||
38 | #include <asm/hardware/it8152.h> | ||
39 | |||
40 | #include "generic.h" | ||
41 | #include "cm-x270-pci.h" | ||
42 | |||
43 | #define RTC_PHYS_BASE (PXA_CS1_PHYS + (5 << 22)) | ||
44 | #define DM9000_PHYS_BASE (PXA_CS1_PHYS + (6 << 22)) | ||
45 | |||
46 | static struct resource cmx270_dm9k_resource[] = { | ||
47 | [0] = { | ||
48 | .start = DM9000_PHYS_BASE, | ||
49 | .end = DM9000_PHYS_BASE + 4, | ||
50 | .flags = IORESOURCE_MEM, | ||
51 | }, | ||
52 | [1] = { | ||
53 | .start = DM9000_PHYS_BASE + 8, | ||
54 | .end = DM9000_PHYS_BASE + 8 + 500, | ||
55 | .flags = IORESOURCE_MEM, | ||
56 | }, | ||
57 | [2] = { | ||
58 | .start = CMX270_ETHIRQ, | ||
59 | .end = CMX270_ETHIRQ, | ||
60 | .flags = IORESOURCE_IRQ, | ||
61 | } | ||
62 | }; | ||
63 | |||
64 | /* for the moment we limit ourselves to 32bit IO until some | ||
65 | * better IO routines can be written and tested | ||
66 | */ | ||
67 | static struct dm9000_plat_data cmx270_dm9k_platdata = { | ||
68 | .flags = DM9000_PLATF_32BITONLY, | ||
69 | }; | ||
70 | |||
71 | /* Ethernet device */ | ||
72 | static struct platform_device cmx270_device_dm9k = { | ||
73 | .name = "dm9000", | ||
74 | .id = 0, | ||
75 | .num_resources = ARRAY_SIZE(cmx270_dm9k_resource), | ||
76 | .resource = cmx270_dm9k_resource, | ||
77 | .dev = { | ||
78 | .platform_data = &cmx270_dm9k_platdata, | ||
79 | } | ||
80 | }; | ||
81 | |||
82 | /* audio device */ | ||
83 | static struct platform_device cmx270_audio_device = { | ||
84 | .name = "pxa2xx-ac97", | ||
85 | .id = -1, | ||
86 | }; | ||
87 | |||
88 | /* touchscreen controller */ | ||
89 | static struct platform_device cmx270_ts_device = { | ||
90 | .name = "ucb1400_ts", | ||
91 | .id = -1, | ||
92 | }; | ||
93 | |||
94 | /* RTC */ | ||
95 | static struct resource cmx270_v3020_resource[] = { | ||
96 | [0] = { | ||
97 | .start = RTC_PHYS_BASE, | ||
98 | .end = RTC_PHYS_BASE + 4, | ||
99 | .flags = IORESOURCE_MEM, | ||
100 | }, | ||
101 | }; | ||
102 | |||
103 | struct v3020_platform_data cmx270_v3020_pdata = { | ||
104 | .leftshift = 16, | ||
105 | }; | ||
106 | |||
107 | static struct platform_device cmx270_rtc_device = { | ||
108 | .name = "v3020", | ||
109 | .num_resources = ARRAY_SIZE(cmx270_v3020_resource), | ||
110 | .resource = cmx270_v3020_resource, | ||
111 | .id = -1, | ||
112 | .dev = { | ||
113 | .platform_data = &cmx270_v3020_pdata, | ||
114 | } | ||
115 | }; | ||
116 | |||
117 | /* | ||
118 | * CM-X270 LEDs | ||
119 | */ | ||
120 | static struct platform_device cmx270_led_device = { | ||
121 | .name = "cm-x270-led", | ||
122 | .id = -1, | ||
123 | }; | ||
124 | |||
125 | /* 2700G graphics */ | ||
126 | static u64 fb_dma_mask = ~(u64)0; | ||
127 | |||
128 | static struct resource cmx270_2700G_resource[] = { | ||
129 | /* frame buffer memory including ODFB and External SDRAM */ | ||
130 | [0] = { | ||
131 | .start = MARATHON_PHYS, | ||
132 | .end = MARATHON_PHYS + 0x02000000, | ||
133 | .flags = IORESOURCE_MEM, | ||
134 | }, | ||
135 | /* Marathon registers */ | ||
136 | [1] = { | ||
137 | .start = MARATHON_PHYS + 0x03fe0000, | ||
138 | .end = MARATHON_PHYS + 0x03ffffff, | ||
139 | .flags = IORESOURCE_MEM, | ||
140 | }, | ||
141 | }; | ||
142 | |||
143 | static unsigned long save_lcd_regs[10]; | ||
144 | |||
145 | static int cmx270_marathon_probe(struct fb_info *fb) | ||
146 | { | ||
147 | /* save PXA-270 pin settings before enabling 2700G */ | ||
148 | save_lcd_regs[0] = GPDR1; | ||
149 | save_lcd_regs[1] = GPDR2; | ||
150 | save_lcd_regs[2] = GAFR1_U; | ||
151 | save_lcd_regs[3] = GAFR2_L; | ||
152 | save_lcd_regs[4] = GAFR2_U; | ||
153 | |||
154 | /* Disable PXA-270 on-chip controller driving pins */ | ||
155 | GPDR1 &= ~(0xfc000000); | ||
156 | GPDR2 &= ~(0x00c03fff); | ||
157 | GAFR1_U &= ~(0xfff00000); | ||
158 | GAFR2_L &= ~(0x0fffffff); | ||
159 | GAFR2_U &= ~(0x0000f000); | ||
160 | return 0; | ||
161 | } | ||
162 | |||
163 | static int cmx270_marathon_remove(struct fb_info *fb) | ||
164 | { | ||
165 | GPDR1 = save_lcd_regs[0]; | ||
166 | GPDR2 = save_lcd_regs[1]; | ||
167 | GAFR1_U = save_lcd_regs[2]; | ||
168 | GAFR2_L = save_lcd_regs[3]; | ||
169 | GAFR2_U = save_lcd_regs[4]; | ||
170 | return 0; | ||
171 | } | ||
172 | |||
173 | static struct mbxfb_platform_data cmx270_2700G_data = { | ||
174 | .xres = { | ||
175 | .min = 240, | ||
176 | .max = 1200, | ||
177 | .defval = 640, | ||
178 | }, | ||
179 | .yres = { | ||
180 | .min = 240, | ||
181 | .max = 1200, | ||
182 | .defval = 480, | ||
183 | }, | ||
184 | .bpp = { | ||
185 | .min = 16, | ||
186 | .max = 32, | ||
187 | .defval = 16, | ||
188 | }, | ||
189 | .memsize = 8*1024*1024, | ||
190 | .probe = cmx270_marathon_probe, | ||
191 | .remove = cmx270_marathon_remove, | ||
192 | }; | ||
193 | |||
194 | static struct platform_device cmx270_2700G = { | ||
195 | .name = "mbx-fb", | ||
196 | .dev = { | ||
197 | .platform_data = &cmx270_2700G_data, | ||
198 | .dma_mask = &fb_dma_mask, | ||
199 | .coherent_dma_mask = 0xffffffff, | ||
200 | }, | ||
201 | .num_resources = ARRAY_SIZE(cmx270_2700G_resource), | ||
202 | .resource = cmx270_2700G_resource, | ||
203 | .id = -1, | ||
204 | }; | ||
205 | |||
206 | static u64 ata_dma_mask = ~(u64)0; | ||
207 | |||
208 | static struct platform_device cmx270_ata = { | ||
209 | .name = "pata_cm_x270", | ||
210 | .id = -1, | ||
211 | .dev = { | ||
212 | .dma_mask = &ata_dma_mask, | ||
213 | .coherent_dma_mask = 0xffffffff, | ||
214 | }, | ||
215 | }; | ||
216 | |||
217 | /* platform devices */ | ||
218 | static struct platform_device *platform_devices[] __initdata = { | ||
219 | &cmx270_device_dm9k, | ||
220 | &cmx270_audio_device, | ||
221 | &cmx270_rtc_device, | ||
222 | &cmx270_2700G, | ||
223 | &cmx270_led_device, | ||
224 | &cmx270_ts_device, | ||
225 | &cmx270_ata, | ||
226 | }; | ||
227 | |||
228 | /* Map PCI companion and IDE/General Purpose CS statically */ | ||
229 | static struct map_desc cmx270_io_desc[] __initdata = { | ||
230 | [0] = { /* IDE/general purpose space */ | ||
231 | .virtual = CMX270_IDE104_VIRT, | ||
232 | .pfn = __phys_to_pfn(CMX270_IDE104_PHYS), | ||
233 | .length = SZ_64M - SZ_8M, | ||
234 | .type = MT_DEVICE | ||
235 | }, | ||
236 | [1] = { /* PCI bridge */ | ||
237 | .virtual = CMX270_IT8152_VIRT, | ||
238 | .pfn = __phys_to_pfn(CMX270_IT8152_PHYS), | ||
239 | .length = SZ_64M, | ||
240 | .type = MT_DEVICE | ||
241 | }, | ||
242 | }; | ||
243 | |||
244 | /* | ||
245 | Display definitions | ||
246 | keep these for backwards compatibility, although symbolic names (as | ||
247 | e.g. in lpd270.c) looks better | ||
248 | */ | ||
249 | #define MTYPE_STN320x240 0 | ||
250 | #define MTYPE_TFT640x480 1 | ||
251 | #define MTYPE_CRT640x480 2 | ||
252 | #define MTYPE_CRT800x600 3 | ||
253 | #define MTYPE_TFT320x240 6 | ||
254 | #define MTYPE_STN640x480 7 | ||
255 | |||
256 | static struct pxafb_mode_info generic_stn_320x240_mode = { | ||
257 | .pixclock = 76923, | ||
258 | .bpp = 8, | ||
259 | .xres = 320, | ||
260 | .yres = 240, | ||
261 | .hsync_len = 3, | ||
262 | .vsync_len = 2, | ||
263 | .left_margin = 3, | ||
264 | .upper_margin = 0, | ||
265 | .right_margin = 3, | ||
266 | .lower_margin = 0, | ||
267 | .sync = (FB_SYNC_HOR_HIGH_ACT | | ||
268 | FB_SYNC_VERT_HIGH_ACT), | ||
269 | .cmap_greyscale = 0, | ||
270 | }; | ||
271 | |||
272 | static struct pxafb_mach_info generic_stn_320x240 = { | ||
273 | .modes = &generic_stn_320x240_mode, | ||
274 | .num_modes = 1, | ||
275 | .lccr0 = 0, | ||
276 | .lccr3 = (LCCR3_PixClkDiv(0x03) | | ||
277 | LCCR3_Acb(0xff) | | ||
278 | LCCR3_PCP), | ||
279 | .cmap_inverse = 0, | ||
280 | .cmap_static = 0, | ||
281 | }; | ||
282 | |||
283 | static struct pxafb_mode_info generic_tft_640x480_mode = { | ||
284 | .pixclock = 38461, | ||
285 | .bpp = 8, | ||
286 | .xres = 640, | ||
287 | .yres = 480, | ||
288 | .hsync_len = 60, | ||
289 | .vsync_len = 2, | ||
290 | .left_margin = 70, | ||
291 | .upper_margin = 10, | ||
292 | .right_margin = 70, | ||
293 | .lower_margin = 5, | ||
294 | .sync = 0, | ||
295 | .cmap_greyscale = 0, | ||
296 | }; | ||
297 | |||
298 | static struct pxafb_mach_info generic_tft_640x480 = { | ||
299 | .modes = &generic_tft_640x480_mode, | ||
300 | .num_modes = 1, | ||
301 | .lccr0 = (LCCR0_PAS), | ||
302 | .lccr3 = (LCCR3_PixClkDiv(0x01) | | ||
303 | LCCR3_Acb(0xff) | | ||
304 | LCCR3_PCP), | ||
305 | .cmap_inverse = 0, | ||
306 | .cmap_static = 0, | ||
307 | }; | ||
308 | |||
309 | static struct pxafb_mode_info generic_crt_640x480_mode = { | ||
310 | .pixclock = 38461, | ||
311 | .bpp = 8, | ||
312 | .xres = 640, | ||
313 | .yres = 480, | ||
314 | .hsync_len = 63, | ||
315 | .vsync_len = 2, | ||
316 | .left_margin = 81, | ||
317 | .upper_margin = 33, | ||
318 | .right_margin = 16, | ||
319 | .lower_margin = 10, | ||
320 | .sync = (FB_SYNC_HOR_HIGH_ACT | | ||
321 | FB_SYNC_VERT_HIGH_ACT), | ||
322 | .cmap_greyscale = 0, | ||
323 | }; | ||
324 | |||
325 | static struct pxafb_mach_info generic_crt_640x480 = { | ||
326 | .modes = &generic_crt_640x480_mode, | ||
327 | .num_modes = 1, | ||
328 | .lccr0 = (LCCR0_PAS), | ||
329 | .lccr3 = (LCCR3_PixClkDiv(0x01) | | ||
330 | LCCR3_Acb(0xff)), | ||
331 | .cmap_inverse = 0, | ||
332 | .cmap_static = 0, | ||
333 | }; | ||
334 | |||
335 | static struct pxafb_mode_info generic_crt_800x600_mode = { | ||
336 | .pixclock = 28846, | ||
337 | .bpp = 8, | ||
338 | .xres = 800, | ||
339 | .yres = 600, | ||
340 | .hsync_len = 63, | ||
341 | .vsync_len = 2, | ||
342 | .left_margin = 26, | ||
343 | .upper_margin = 21, | ||
344 | .right_margin = 26, | ||
345 | .lower_margin = 11, | ||
346 | .sync = (FB_SYNC_HOR_HIGH_ACT | | ||
347 | FB_SYNC_VERT_HIGH_ACT), | ||
348 | .cmap_greyscale = 0, | ||
349 | }; | ||
350 | |||
351 | static struct pxafb_mach_info generic_crt_800x600 = { | ||
352 | .modes = &generic_crt_800x600_mode, | ||
353 | .num_modes = 1, | ||
354 | .lccr0 = (LCCR0_PAS), | ||
355 | .lccr3 = (LCCR3_PixClkDiv(0x02) | | ||
356 | LCCR3_Acb(0xff)), | ||
357 | .cmap_inverse = 0, | ||
358 | .cmap_static = 0, | ||
359 | }; | ||
360 | |||
361 | static struct pxafb_mode_info generic_tft_320x240_mode = { | ||
362 | .pixclock = 134615, | ||
363 | .bpp = 16, | ||
364 | .xres = 320, | ||
365 | .yres = 240, | ||
366 | .hsync_len = 63, | ||
367 | .vsync_len = 7, | ||
368 | .left_margin = 75, | ||
369 | .upper_margin = 0, | ||
370 | .right_margin = 15, | ||
371 | .lower_margin = 15, | ||
372 | .sync = 0, | ||
373 | .cmap_greyscale = 0, | ||
374 | }; | ||
375 | |||
376 | static struct pxafb_mach_info generic_tft_320x240 = { | ||
377 | .modes = &generic_tft_320x240_mode, | ||
378 | .num_modes = 1, | ||
379 | .lccr0 = (LCCR0_PAS), | ||
380 | .lccr3 = (LCCR3_PixClkDiv(0x06) | | ||
381 | LCCR3_Acb(0xff) | | ||
382 | LCCR3_PCP), | ||
383 | .cmap_inverse = 0, | ||
384 | .cmap_static = 0, | ||
385 | }; | ||
386 | |||
387 | static struct pxafb_mode_info generic_stn_640x480_mode = { | ||
388 | .pixclock = 57692, | ||
389 | .bpp = 8, | ||
390 | .xres = 640, | ||
391 | .yres = 480, | ||
392 | .hsync_len = 4, | ||
393 | .vsync_len = 2, | ||
394 | .left_margin = 10, | ||
395 | .upper_margin = 5, | ||
396 | .right_margin = 10, | ||
397 | .lower_margin = 5, | ||
398 | .sync = (FB_SYNC_HOR_HIGH_ACT | | ||
399 | FB_SYNC_VERT_HIGH_ACT), | ||
400 | .cmap_greyscale = 0, | ||
401 | }; | ||
402 | |||
403 | static struct pxafb_mach_info generic_stn_640x480 = { | ||
404 | .modes = &generic_stn_640x480_mode, | ||
405 | .num_modes = 1, | ||
406 | .lccr0 = 0, | ||
407 | .lccr3 = (LCCR3_PixClkDiv(0x02) | | ||
408 | LCCR3_Acb(0xff)), | ||
409 | .cmap_inverse = 0, | ||
410 | .cmap_static = 0, | ||
411 | }; | ||
412 | |||
413 | static struct pxafb_mach_info *cmx270_display = &generic_crt_640x480; | ||
414 | |||
415 | static int __init cmx270_set_display(char *str) | ||
416 | { | ||
417 | int disp_type = simple_strtol(str, NULL, 0); | ||
418 | switch (disp_type) { | ||
419 | case MTYPE_STN320x240: | ||
420 | cmx270_display = &generic_stn_320x240; | ||
421 | break; | ||
422 | case MTYPE_TFT640x480: | ||
423 | cmx270_display = &generic_tft_640x480; | ||
424 | break; | ||
425 | case MTYPE_CRT640x480: | ||
426 | cmx270_display = &generic_crt_640x480; | ||
427 | break; | ||
428 | case MTYPE_CRT800x600: | ||
429 | cmx270_display = &generic_crt_800x600; | ||
430 | break; | ||
431 | case MTYPE_TFT320x240: | ||
432 | cmx270_display = &generic_tft_320x240; | ||
433 | break; | ||
434 | case MTYPE_STN640x480: | ||
435 | cmx270_display = &generic_stn_640x480; | ||
436 | break; | ||
437 | default: /* fallback to CRT 640x480 */ | ||
438 | cmx270_display = &generic_crt_640x480; | ||
439 | break; | ||
440 | } | ||
441 | return 1; | ||
442 | } | ||
443 | |||
444 | /* | ||
445 | This should be done really early to get proper configuration for | ||
446 | frame buffer. | ||
447 | Indeed, pxafb parameters can be used istead, but CM-X270 bootloader | ||
448 | has limitied line length for kernel command line, and also it will | ||
449 | break compatibitlty with proprietary releases already in field. | ||
450 | */ | ||
451 | __setup("monitor=", cmx270_set_display); | ||
452 | |||
453 | /* PXA27x OHCI controller setup */ | ||
454 | static int cmx270_ohci_init(struct device *dev) | ||
455 | { | ||
456 | /* Set the Power Control Polarity Low */ | ||
457 | UHCHR = (UHCHR | UHCHR_PCPL) & | ||
458 | ~(UHCHR_SSEP1 | UHCHR_SSEP2 | UHCHR_SSE); | ||
459 | |||
460 | return 0; | ||
461 | } | ||
462 | |||
463 | static struct pxaohci_platform_data cmx270_ohci_platform_data = { | ||
464 | .port_mode = PMM_PERPORT_MODE, | ||
465 | .init = cmx270_ohci_init, | ||
466 | }; | ||
467 | |||
468 | |||
469 | static int cmx270_mci_init(struct device *dev, | ||
470 | irq_handler_t cmx270_detect_int, | ||
471 | void *data) | ||
472 | { | ||
473 | int err; | ||
474 | |||
475 | /* | ||
476 | * setup GPIO for PXA27x MMC controller | ||
477 | */ | ||
478 | pxa_gpio_mode(GPIO32_MMCCLK_MD); | ||
479 | pxa_gpio_mode(GPIO112_MMCCMD_MD); | ||
480 | pxa_gpio_mode(GPIO92_MMCDAT0_MD); | ||
481 | pxa_gpio_mode(GPIO109_MMCDAT1_MD); | ||
482 | pxa_gpio_mode(GPIO110_MMCDAT2_MD); | ||
483 | pxa_gpio_mode(GPIO111_MMCDAT3_MD); | ||
484 | |||
485 | /* SB-X270 uses GPIO105 as SD power enable */ | ||
486 | pxa_gpio_mode(105 | GPIO_OUT); | ||
487 | |||
488 | /* card detect IRQ on GPIO 83 */ | ||
489 | pxa_gpio_mode(IRQ_TO_GPIO(CMX270_MMC_IRQ)); | ||
490 | set_irq_type(CMX270_MMC_IRQ, IRQT_FALLING); | ||
491 | |||
492 | err = request_irq(CMX270_MMC_IRQ, cmx270_detect_int, | ||
493 | IRQF_DISABLED | IRQF_TRIGGER_FALLING, | ||
494 | "MMC card detect", data); | ||
495 | if (err) { | ||
496 | printk(KERN_ERR "cmx270_mci_init: MMC/SD: can't" | ||
497 | " request MMC card detect IRQ\n"); | ||
498 | return -1; | ||
499 | } | ||
500 | |||
501 | return 0; | ||
502 | } | ||
503 | |||
504 | static void cmx270_mci_setpower(struct device *dev, unsigned int vdd) | ||
505 | { | ||
506 | struct pxamci_platform_data *p_d = dev->platform_data; | ||
507 | |||
508 | if ((1 << vdd) & p_d->ocr_mask) { | ||
509 | printk(KERN_DEBUG "%s: on\n", __FUNCTION__); | ||
510 | GPCR(105) = GPIO_bit(105); | ||
511 | } else { | ||
512 | GPSR(105) = GPIO_bit(105); | ||
513 | printk(KERN_DEBUG "%s: off\n", __FUNCTION__); | ||
514 | } | ||
515 | } | ||
516 | |||
517 | static void cmx270_mci_exit(struct device *dev, void *data) | ||
518 | { | ||
519 | free_irq(CMX270_MMC_IRQ, data); | ||
520 | } | ||
521 | |||
522 | static struct pxamci_platform_data cmx270_mci_platform_data = { | ||
523 | .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, | ||
524 | .init = cmx270_mci_init, | ||
525 | .setpower = cmx270_mci_setpower, | ||
526 | .exit = cmx270_mci_exit, | ||
527 | }; | ||
528 | |||
529 | #ifdef CONFIG_PM | ||
530 | static unsigned long sleep_save_msc[10]; | ||
531 | |||
532 | static int cmx270_suspend(struct sys_device *dev, pm_message_t state) | ||
533 | { | ||
534 | cmx270_pci_suspend(); | ||
535 | |||
536 | /* save MSC registers */ | ||
537 | sleep_save_msc[0] = MSC0; | ||
538 | sleep_save_msc[1] = MSC1; | ||
539 | sleep_save_msc[2] = MSC2; | ||
540 | |||
541 | /* setup power saving mode registers */ | ||
542 | PCFR = 0x0; | ||
543 | PSLR = 0xff400000; | ||
544 | PMCR = 0x00000005; | ||
545 | PWER = 0x80000000; | ||
546 | PFER = 0x00000000; | ||
547 | PRER = 0x00000000; | ||
548 | PGSR0 = 0xC0018800; | ||
549 | PGSR1 = 0x004F0002; | ||
550 | PGSR2 = 0x6021C000; | ||
551 | PGSR3 = 0x00020000; | ||
552 | |||
553 | return 0; | ||
554 | } | ||
555 | |||
556 | static int cmx270_resume(struct sys_device *dev) | ||
557 | { | ||
558 | cmx270_pci_resume(); | ||
559 | |||
560 | /* restore MSC registers */ | ||
561 | MSC0 = sleep_save_msc[0]; | ||
562 | MSC1 = sleep_save_msc[1]; | ||
563 | MSC2 = sleep_save_msc[2]; | ||
564 | |||
565 | return 0; | ||
566 | } | ||
567 | |||
568 | static struct sysdev_class cmx270_pm_sysclass = { | ||
569 | set_kset_name("pm"), | ||
570 | .resume = cmx270_resume, | ||
571 | .suspend = cmx270_suspend, | ||
572 | }; | ||
573 | |||
574 | static struct sys_device cmx270_pm_device = { | ||
575 | .cls = &cmx270_pm_sysclass, | ||
576 | }; | ||
577 | |||
578 | static int __init cmx270_pm_init(void) | ||
579 | { | ||
580 | int error; | ||
581 | error = sysdev_class_register(&cmx270_pm_sysclass); | ||
582 | if (error == 0) | ||
583 | error = sysdev_register(&cmx270_pm_device); | ||
584 | return error; | ||
585 | } | ||
586 | #else | ||
587 | static int __init cmx270_pm_init(void) { return 0; } | ||
588 | #endif | ||
589 | |||
590 | static void __init cmx270_init(void) | ||
591 | { | ||
592 | cmx270_pm_init(); | ||
593 | |||
594 | set_pxa_fb_info(cmx270_display); | ||
595 | |||
596 | /* register CM-X270 platform devices */ | ||
597 | platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); | ||
598 | |||
599 | /* set MCI and OHCI platform parameters */ | ||
600 | pxa_set_mci_info(&cmx270_mci_platform_data); | ||
601 | pxa_set_ohci_info(&cmx270_ohci_platform_data); | ||
602 | |||
603 | /* This enables the STUART */ | ||
604 | pxa_gpio_mode(GPIO46_STRXD_MD); | ||
605 | pxa_gpio_mode(GPIO47_STTXD_MD); | ||
606 | |||
607 | /* This enables the BTUART */ | ||
608 | pxa_gpio_mode(GPIO42_BTRXD_MD); | ||
609 | pxa_gpio_mode(GPIO43_BTTXD_MD); | ||
610 | pxa_gpio_mode(GPIO44_BTCTS_MD); | ||
611 | pxa_gpio_mode(GPIO45_BTRTS_MD); | ||
612 | } | ||
613 | |||
614 | static void __init cmx270_init_irq(void) | ||
615 | { | ||
616 | pxa27x_init_irq(); | ||
617 | |||
618 | |||
619 | cmx270_pci_init_irq(); | ||
620 | |||
621 | /* Setup interrupt for dm9000 */ | ||
622 | pxa_gpio_mode(IRQ_TO_GPIO(CMX270_ETHIRQ)); | ||
623 | set_irq_type(CMX270_ETHIRQ, IRQT_RISING); | ||
624 | |||
625 | /* Setup interrupt for 2700G */ | ||
626 | pxa_gpio_mode(IRQ_TO_GPIO(CMX270_GFXIRQ)); | ||
627 | set_irq_type(CMX270_GFXIRQ, IRQT_FALLING); | ||
628 | } | ||
629 | |||
630 | static void __init cmx270_map_io(void) | ||
631 | { | ||
632 | pxa_map_io(); | ||
633 | iotable_init(cmx270_io_desc, ARRAY_SIZE(cmx270_io_desc)); | ||
634 | } | ||
635 | |||
636 | |||
637 | MACHINE_START(ARMCORE, "Compulab CM-x270") | ||
638 | .boot_params = 0xa0000100, | ||
639 | .phys_io = 0x40000000, | ||
640 | .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, | ||
641 | .map_io = cmx270_map_io, | ||
642 | .init_irq = cmx270_init_irq, | ||
643 | .timer = &pxa_timer, | ||
644 | .init_machine = cmx270_init, | ||
645 | MACHINE_END | ||
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig index 3cb23210b912..257b44094e4c 100644 --- a/drivers/leds/Kconfig +++ b/drivers/leds/Kconfig | |||
@@ -108,6 +108,12 @@ config LEDS_GPIO | |||
108 | outputs. To be useful the particular board must have LEDs | 108 | outputs. To be useful the particular board must have LEDs |
109 | and they must be connected to the GPIO lines. | 109 | and they must be connected to the GPIO lines. |
110 | 110 | ||
111 | config LEDS_CM_X270 | ||
112 | tristate "LED Support for the CM-X270 LEDs" | ||
113 | depends on LEDS_CLASS && MACH_ARMCORE | ||
114 | help | ||
115 | This option enables support for the CM-X270 LEDs. | ||
116 | |||
111 | comment "LED Triggers" | 117 | comment "LED Triggers" |
112 | 118 | ||
113 | config LEDS_TRIGGERS | 119 | config LEDS_TRIGGERS |
diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile index d2ca1abbc3d2..a60de1b46c2c 100644 --- a/drivers/leds/Makefile +++ b/drivers/leds/Makefile | |||
@@ -18,6 +18,7 @@ obj-$(CONFIG_LEDS_H1940) += leds-h1940.o | |||
18 | obj-$(CONFIG_LEDS_COBALT_QUBE) += leds-cobalt-qube.o | 18 | obj-$(CONFIG_LEDS_COBALT_QUBE) += leds-cobalt-qube.o |
19 | obj-$(CONFIG_LEDS_COBALT_RAQ) += leds-cobalt-raq.o | 19 | obj-$(CONFIG_LEDS_COBALT_RAQ) += leds-cobalt-raq.o |
20 | obj-$(CONFIG_LEDS_GPIO) += leds-gpio.o | 20 | obj-$(CONFIG_LEDS_GPIO) += leds-gpio.o |
21 | obj-$(CONFIG_LEDS_CM_X270) += leds-cm-x270.o | ||
21 | 22 | ||
22 | # LED Triggers | 23 | # LED Triggers |
23 | obj-$(CONFIG_LEDS_TRIGGER_TIMER) += ledtrig-timer.o | 24 | obj-$(CONFIG_LEDS_TRIGGER_TIMER) += ledtrig-timer.o |
diff --git a/drivers/leds/leds-cm-x270.c b/drivers/leds/leds-cm-x270.c new file mode 100644 index 000000000000..9aebef02a974 --- /dev/null +++ b/drivers/leds/leds-cm-x270.c | |||
@@ -0,0 +1,122 @@ | |||
1 | /* | ||
2 | * drivers/leds/leds-cm-x270.c | ||
3 | * | ||
4 | * Copyright 2007 CompuLab Ltd. | ||
5 | * Author: Mike Rapoport <mike@compulab.co.il> | ||
6 | * | ||
7 | * Based on leds-corgi.c | ||
8 | * Author: Richard Purdie <rpurdie@openedhand.com> | ||
9 | * | ||
10 | * This program is free software; you can redistribute it and/or modify | ||
11 | * it under the terms of the GNU General Public License version 2 as | ||
12 | * published by the Free Software Foundation. | ||
13 | * | ||
14 | */ | ||
15 | |||
16 | #include <linux/kernel.h> | ||
17 | #include <linux/init.h> | ||
18 | #include <linux/platform_device.h> | ||
19 | #include <linux/leds.h> | ||
20 | |||
21 | #include <asm/arch/hardware.h> | ||
22 | #include <asm/arch/pxa-regs.h> | ||
23 | |||
24 | #define GPIO_RED_LED (93) | ||
25 | #define GPIO_GREEN_LED (94) | ||
26 | |||
27 | static void cmx270_red_set(struct led_classdev *led_cdev, | ||
28 | enum led_brightness value) | ||
29 | { | ||
30 | if (value) | ||
31 | GPCR(GPIO_RED_LED) = GPIO_bit(GPIO_RED_LED); | ||
32 | else | ||
33 | GPSR(GPIO_RED_LED) = GPIO_bit(GPIO_RED_LED); | ||
34 | } | ||
35 | |||
36 | static void cmx270_green_set(struct led_classdev *led_cdev, | ||
37 | enum led_brightness value) | ||
38 | { | ||
39 | if (value) | ||
40 | GPCR(GPIO_GREEN_LED) = GPIO_bit(GPIO_GREEN_LED); | ||
41 | else | ||
42 | GPSR(GPIO_GREEN_LED) = GPIO_bit(GPIO_GREEN_LED); | ||
43 | } | ||
44 | |||
45 | static struct led_classdev cmx270_red_led = { | ||
46 | .name = "cm-x270:red", | ||
47 | .default_trigger = "nand-disk", | ||
48 | .brightness_set = cmx270_red_set, | ||
49 | }; | ||
50 | |||
51 | static struct led_classdev cmx270_green_led = { | ||
52 | .name = "cm-x270:green", | ||
53 | .default_trigger = "heartbeat", | ||
54 | .brightness_set = cmx270_green_set, | ||
55 | }; | ||
56 | |||
57 | #ifdef CONFIG_PM | ||
58 | static int cmx270led_suspend(struct platform_device *dev, pm_message_t state) | ||
59 | { | ||
60 | led_classdev_suspend(&cmx270_red_led); | ||
61 | led_classdev_suspend(&cmx270_green_led); | ||
62 | return 0; | ||
63 | } | ||
64 | |||
65 | static int cmx270led_resume(struct platform_device *dev) | ||
66 | { | ||
67 | led_classdev_resume(&cmx270_red_led); | ||
68 | led_classdev_resume(&cmx270_green_led); | ||
69 | return 0; | ||
70 | } | ||
71 | #endif | ||
72 | |||
73 | static int cmx270led_probe(struct platform_device *pdev) | ||
74 | { | ||
75 | int ret; | ||
76 | |||
77 | ret = led_classdev_register(&pdev->dev, &cmx270_red_led); | ||
78 | if (ret < 0) | ||
79 | return ret; | ||
80 | |||
81 | ret = led_classdev_register(&pdev->dev, &cmx270_green_led); | ||
82 | if (ret < 0) | ||
83 | led_classdev_unregister(&cmx270_red_led); | ||
84 | |||
85 | return ret; | ||
86 | } | ||
87 | |||
88 | static int cmx270led_remove(struct platform_device *pdev) | ||
89 | { | ||
90 | led_classdev_unregister(&cmx270_red_led); | ||
91 | led_classdev_unregister(&cmx270_green_led); | ||
92 | return 0; | ||
93 | } | ||
94 | |||
95 | static struct platform_driver cmx270led_driver = { | ||
96 | .probe = cmx270led_probe, | ||
97 | .remove = cmx270led_remove, | ||
98 | #ifdef CONFIG_PM | ||
99 | .suspend = cmx270led_suspend, | ||
100 | .resume = cmx270led_resume, | ||
101 | #endif | ||
102 | .driver = { | ||
103 | .name = "cm-x270-led", | ||
104 | }, | ||
105 | }; | ||
106 | |||
107 | static int __init cmx270led_init(void) | ||
108 | { | ||
109 | return platform_driver_register(&cmx270led_driver); | ||
110 | } | ||
111 | |||
112 | static void __exit cmx270led_exit(void) | ||
113 | { | ||
114 | platform_driver_unregister(&cmx270led_driver); | ||
115 | } | ||
116 | |||
117 | module_init(cmx270led_init); | ||
118 | module_exit(cmx270led_exit); | ||
119 | |||
120 | MODULE_AUTHOR("Mike Rapoport <mike@compulab.co.il>"); | ||
121 | MODULE_DESCRIPTION("CM-x270 LED driver"); | ||
122 | MODULE_LICENSE("GPL"); | ||
diff --git a/include/asm-arm/arch-pxa/cm-x270.h b/include/asm-arm/arch-pxa/cm-x270.h new file mode 100644 index 000000000000..f8fac9e18009 --- /dev/null +++ b/include/asm-arm/arch-pxa/cm-x270.h | |||
@@ -0,0 +1,50 @@ | |||
1 | /* | ||
2 | * linux/include/asm/arch-pxa/cm-x270.h | ||
3 | * | ||
4 | * Copyright Compulab Ltd., 2003, 2007 | ||
5 | * Mike Rapoport <mike@compulab.co.il> | ||
6 | * | ||
7 | * This program is free software; you can redistribute it and/or modify | ||
8 | * it under the terms of the GNU General Public License version 2 as | ||
9 | * published by the Free Software Foundation. | ||
10 | */ | ||
11 | |||
12 | |||
13 | /* CM-x270 device physical addresses */ | ||
14 | #define CMX270_CS1_PHYS (PXA_CS1_PHYS) | ||
15 | #define MARATHON_PHYS (PXA_CS2_PHYS) | ||
16 | #define CMX270_IDE104_PHYS (PXA_CS3_PHYS) | ||
17 | #define CMX270_IT8152_PHYS (PXA_CS4_PHYS) | ||
18 | |||
19 | /* Statically mapped regions */ | ||
20 | #define CMX270_VIRT_BASE (0xe8000000) | ||
21 | #define CMX270_IT8152_VIRT (CMX270_VIRT_BASE) | ||
22 | #define CMX270_IDE104_VIRT (CMX270_IT8152_VIRT + SZ_64M) | ||
23 | |||
24 | /* GPIO related definitions */ | ||
25 | #define GPIO_IT8152_IRQ (22) | ||
26 | |||
27 | #define IRQ_GPIO_IT8152_IRQ IRQ_GPIO(GPIO_IT8152_IRQ) | ||
28 | #define PME_IRQ IRQ_GPIO(0) | ||
29 | #define CMX270_IDE_IRQ IRQ_GPIO(100) | ||
30 | #define CMX270_GPIRQ1 IRQ_GPIO(101) | ||
31 | #define CMX270_TOUCHIRQ IRQ_GPIO(96) | ||
32 | #define CMX270_ETHIRQ IRQ_GPIO(10) | ||
33 | #define CMX270_GFXIRQ IRQ_GPIO(95) | ||
34 | #define CMX270_NANDIRQ IRQ_GPIO(89) | ||
35 | #define CMX270_MMC_IRQ IRQ_GPIO(83) | ||
36 | |||
37 | /* PCMCIA related definitions */ | ||
38 | #define PCC_DETECT(x) (GPLR(84 - (x)) & GPIO_bit(84 - (x))) | ||
39 | #define PCC_READY(x) (GPLR(82 - (x)) & GPIO_bit(82 - (x))) | ||
40 | |||
41 | #define PCMCIA_S0_CD_VALID IRQ_GPIO(84) | ||
42 | #define PCMCIA_S0_CD_VALID_EDGE GPIO_BOTH_EDGES | ||
43 | |||
44 | #define PCMCIA_S1_CD_VALID IRQ_GPIO(83) | ||
45 | #define PCMCIA_S1_CD_VALID_EDGE GPIO_BOTH_EDGES | ||
46 | |||
47 | #define PCMCIA_S0_RDYINT IRQ_GPIO(82) | ||
48 | #define PCMCIA_S1_RDYINT IRQ_GPIO(81) | ||
49 | |||
50 | #define PCMCIA_RESET_GPIO 53 | ||
diff --git a/include/asm-arm/arch-pxa/dma.h b/include/asm-arm/arch-pxa/dma.h index 3280ee2ddfa5..dbe110ee2666 100644 --- a/include/asm-arm/arch-pxa/dma.h +++ b/include/asm-arm/arch-pxa/dma.h | |||
@@ -30,6 +30,10 @@ typedef enum { | |||
30 | DMA_PRIO_LOW = 2 | 30 | DMA_PRIO_LOW = 2 |
31 | } pxa_dma_prio; | 31 | } pxa_dma_prio; |
32 | 32 | ||
33 | #if defined(CONFIG_MACH_ARMCORE) && defined(CONFIG_PCI) | ||
34 | #define HAVE_ARCH_PCI_SET_DMA_MASK 1 | ||
35 | #endif | ||
36 | |||
33 | /* | 37 | /* |
34 | * DMA registration | 38 | * DMA registration |
35 | */ | 39 | */ |
diff --git a/include/asm-arm/arch-pxa/hardware.h b/include/asm-arm/arch-pxa/hardware.h index 89df077a7e24..ab2d963e742a 100644 --- a/include/asm-arm/arch-pxa/hardware.h +++ b/include/asm-arm/arch-pxa/hardware.h | |||
@@ -215,4 +215,10 @@ extern unsigned int get_memclk_frequency_10khz(void); | |||
215 | 215 | ||
216 | #endif | 216 | #endif |
217 | 217 | ||
218 | #if defined(CONFIG_MACH_ARMCORE) && defined(CONFIG_PCI) | ||
219 | #define PCIBIOS_MIN_IO 0 | ||
220 | #define PCIBIOS_MIN_MEM 0 | ||
221 | #define pcibios_assign_all_busses() 1 | ||
222 | #endif | ||
223 | |||
218 | #endif /* _ASM_ARCH_HARDWARE_H */ | 224 | #endif /* _ASM_ARCH_HARDWARE_H */ |
diff --git a/include/asm-arm/arch-pxa/irqs.h b/include/asm-arm/arch-pxa/irqs.h index 1bcc7632b46c..6238dbf7a236 100644 --- a/include/asm-arm/arch-pxa/irqs.h +++ b/include/asm-arm/arch-pxa/irqs.h | |||
@@ -210,3 +210,24 @@ | |||
210 | #define IRQ_LOCOMO_GPIO_BASE (IRQ_BOARD_START + 1) | 210 | #define IRQ_LOCOMO_GPIO_BASE (IRQ_BOARD_START + 1) |
211 | #define IRQ_LOCOMO_LT_BASE (IRQ_BOARD_START + 2) | 211 | #define IRQ_LOCOMO_LT_BASE (IRQ_BOARD_START + 2) |
212 | #define IRQ_LOCOMO_SPI_BASE (IRQ_BOARD_START + 3) | 212 | #define IRQ_LOCOMO_SPI_BASE (IRQ_BOARD_START + 3) |
213 | |||
214 | /* ITE8152 irqs */ | ||
215 | /* add IT8152 IRQs beyond BOARD_END */ | ||
216 | #ifdef CONFIG_PCI_HOST_ITE8152 | ||
217 | #define IT8152_IRQ(x) (IRQ_GPIO(IRQ_BOARD_END) + 1 + (x)) | ||
218 | |||
219 | /* IRQ-sources in 3 groups - local devices, LPC (serial), and external PCI */ | ||
220 | #define IT8152_LD_IRQ_COUNT 9 | ||
221 | #define IT8152_LP_IRQ_COUNT 16 | ||
222 | #define IT8152_PD_IRQ_COUNT 15 | ||
223 | |||
224 | /* Priorities: */ | ||
225 | #define IT8152_PD_IRQ(i) IT8152_IRQ(i) | ||
226 | #define IT8152_LP_IRQ(i) (IT8152_IRQ(i) + IT8152_PD_IRQ_COUNT) | ||
227 | #define IT8152_LD_IRQ(i) (IT8152_IRQ(i) + IT8152_PD_IRQ_COUNT + IT8152_LP_IRQ_COUNT) | ||
228 | |||
229 | #define IT8152_LAST_IRQ IT8152_LD_IRQ(IT8152_LD_IRQ_COUNT - 1) | ||
230 | |||
231 | #undef NR_IRQS | ||
232 | #define NR_IRQS (IT8152_LAST_IRQ+1) | ||
233 | #endif | ||
diff --git a/include/asm-arm/arch-pxa/memory.h b/include/asm-arm/arch-pxa/memory.h index e17f9881faf0..bee81d66c184 100644 --- a/include/asm-arm/arch-pxa/memory.h +++ b/include/asm-arm/arch-pxa/memory.h | |||
@@ -39,4 +39,14 @@ | |||
39 | */ | 39 | */ |
40 | #define NODE_MEM_SIZE_BITS 26 | 40 | #define NODE_MEM_SIZE_BITS 26 |
41 | 41 | ||
42 | #if !defined(__ASSEMBLY__) && defined(CONFIG_MACH_ARMCORE) && defined(CONFIG_PCI) | ||
43 | void cmx270_pci_adjust_zones(int node, unsigned long *size, | ||
44 | unsigned long *holes); | ||
45 | |||
46 | #define arch_adjust_zones(node, size, holes) \ | ||
47 | cmx270_pci_adjust_zones(node, size, holes) | ||
48 | |||
49 | #define ISA_DMA_THRESHOLD (PHYS_OFFSET + SZ_64M - 1) | ||
50 | #endif | ||
51 | |||
42 | #endif | 52 | #endif |