1 files changed, 45 insertions, 21 deletions

diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c
index b28a915bd980..f777d37d8e66 100644
--- a/drivers/net/e1000/e1000_main.c
+++ b/drivers/net/e1000/e1000_main.c
@@ -522,14 +522,15 @@ e1000_release_manageability(struct e1000_adapter *adapter)
         }
 }
 
-int
-e1000_up(struct e1000_adapter *adapter)
+/**
+ * e1000_configure - configure the hardware for RX and TX
+ * @adapter = private board structure
+ **/
+static void e1000_configure(struct e1000_adapter *adapter)
 {
         struct net_device *netdev = adapter->netdev;
         int i;
 
-        /* hardware has been reset, we need to reload some things */
-
         e1000_set_multi(netdev);
 
         e1000_restore_vlan(adapter);
@@ -548,14 +549,20 @@ e1000_up(struct e1000_adapter *adapter)
         }
 
         adapter->tx_queue_len = netdev->tx_queue_len;
+}
+
+int e1000_up(struct e1000_adapter *adapter)
+{
+        /* hardware has been reset, we need to reload some things */
+        e1000_configure(adapter);
+
+        clear_bit(__E1000_DOWN, &adapter->flags);
 
 #ifdef CONFIG_E1000_NAPI
-        netif_poll_enable(netdev);
+        netif_poll_enable(adapter->netdev);
 #endif
         e1000_irq_enable(adapter);
 
-        clear_bit(__E1000_DOWN, &adapter->flags);
-
         /* fire a link change interrupt to start the watchdog */
         E1000_WRITE_REG(&adapter->hw, ICS, E1000_ICS_LSC);
         return 0;
@@ -640,15 +647,15 @@ e1000_down(struct e1000_adapter *adapter)
          * reschedule our watchdog timer */
         set_bit(__E1000_DOWN, &adapter->flags);
 
+#ifdef CONFIG_E1000_NAPI
+        netif_poll_disable(netdev);
+#endif
         e1000_irq_disable(adapter);
 
         del_timer_sync(&adapter->tx_fifo_stall_timer);
         del_timer_sync(&adapter->watchdog_timer);
         del_timer_sync(&adapter->phy_info_timer);
 
-#ifdef CONFIG_E1000_NAPI
-        netif_poll_disable(netdev);
-#endif
         netdev->tx_queue_len = adapter->tx_queue_len;
         adapter->link_speed = 0;
         adapter->link_duplex = 0;
@@ -1410,21 +1417,17 @@ e1000_open(struct net_device *netdev)
                 return -EBUSY;
 
         /* allocate transmit descriptors */
-        if ((err = e1000_setup_all_tx_resources(adapter)))
+        err = e1000_setup_all_tx_resources(adapter);
+        if (err)
                 goto err_setup_tx;
 
         /* allocate receive descriptors */
-        if ((err = e1000_setup_all_rx_resources(adapter)))
-                goto err_setup_rx;
-
-        err = e1000_request_irq(adapter);
+        err = e1000_setup_all_rx_resources(adapter);
         if (err)
-                goto err_req_irq;
+                goto err_setup_rx;
 
         e1000_power_up_phy(adapter);
 
-        if ((err = e1000_up(adapter)))
-                goto err_up;
         adapter->mng_vlan_id = E1000_MNG_VLAN_NONE;
         if ((adapter->hw.mng_cookie.status &
                           E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT)) {
@@ -1437,12 +1440,33 @@ e1000_open(struct net_device *netdev)
             e1000_check_mng_mode(&adapter->hw))
                 e1000_get_hw_control(adapter);
 
+        /* before we allocate an interrupt, we must be ready to handle it.
+         * Setting DEBUG_SHIRQ in the kernel makes it fire an interrupt
+         * as soon as we call pci_request_irq, so we have to setup our
+         * clean_rx handler before we do so.  */
+        e1000_configure(adapter);
+
+        err = e1000_request_irq(adapter);
+        if (err)
+                goto err_req_irq;
+
+        /* From here on the code is the same as e1000_up() */
+        clear_bit(__E1000_DOWN, &adapter->flags);
+
+#ifdef CONFIG_E1000_NAPI
+        netif_poll_enable(netdev);
+#endif
+
+        e1000_irq_enable(adapter);
+
+        /* fire a link status change interrupt to start the watchdog */
+        E1000_WRITE_REG(&adapter->hw, ICS, E1000_ICS_LSC);
+
         return E1000_SUCCESS;
 
-err_up:
-        e1000_power_down_phy(adapter);
-        e1000_free_irq(adapter);
 err_req_irq:
+        e1000_release_hw_control(adapter);
+        e1000_power_down_phy(adapter);
         e1000_free_all_rx_resources(adapter);
 err_setup_rx:
         e1000_free_all_tx_resources(adapter);