2 files changed, 3 insertions, 37 deletions

diff --git a/drivers/usb/host/isp116x-hcd.c b/drivers/usb/host/isp116x-hcd.c
index aeddef7a12af..1ed2abac8d17 100644
--- a/drivers/usb/host/isp116x-hcd.c
+++ b/drivers/usb/host/isp116x-hcd.c
@@ -1463,10 +1463,6 @@ static int isp116x_sw_reset(struct isp116x *isp116x)
         return ret;
 }
 
-/*
-  Reset. Tries to perform platform-specific hardware
-  reset first; falls back to software reset.
-*/
 static int isp116x_reset(struct usb_hcd *hcd)
 {
         struct isp116x *isp116x = hcd_to_isp116x(hcd);
@@ -1474,17 +1470,7 @@ static int isp116x_reset(struct usb_hcd *hcd)
         u16 clkrdy = 0;
         int ret = 0, timeout = 15 /* ms */ ;
 
-        if (isp116x->board && isp116x->board->reset) {
-                /* Hardware reset */
-                isp116x->board->reset(hcd->self.controller, 1);
-                msleep(10);
-                if (isp116x->board->clock)
-                        isp116x->board->clock(hcd->self.controller, 1);
-                msleep(1);
-                isp116x->board->reset(hcd->self.controller, 0);
-        } else
-                ret = isp116x_sw_reset(isp116x);
-
+        ret = isp116x_sw_reset(isp116x);
         if (ret)
                 return ret;
 
@@ -1501,10 +1487,7 @@ static int isp116x_reset(struct usb_hcd *hcd)
                 ERR("Clock not ready after 20ms\n");
                 /* After sw_reset the clock won't report to be ready, if
                    H_WAKEUP pin is high. */
-                if (!isp116x->board || !isp116x->board->reset)
-                        ERR("The driver does not support hardware wakeup.\n");
-                        ERR("Please make sure that the H_WAKEUP pin "
-                                "is pulled low!\n");
+                ERR("Please make sure that the H_WAKEUP pin is pulled low!\n");
                 ret = -ENODEV;
         }
         return ret;
@@ -1527,15 +1510,7 @@ static void isp116x_stop(struct usb_hcd *hcd)
         isp116x_write_reg32(isp116x, HCRHSTATUS, RH_HS_LPS);
         spin_unlock_irqrestore(&isp116x->lock, flags);
 
-        /* Put the chip into reset state */
-        if (isp116x->board && isp116x->board->reset)
-                isp116x->board->reset(hcd->self.controller, 0);
-        else
-                isp116x_sw_reset(isp116x);
-
-        /* Stop the clock */
-        if (isp116x->board && isp116x->board->clock)
-                isp116x->board->clock(hcd->self.controller, 0);
+        isp116x_sw_reset(isp116x);
 }
 
 /*
diff --git a/include/linux/usb_isp116x.h b/include/linux/usb_isp116x.h
index 8f0b3c226968..436dd8a2b64a 100644
--- a/include/linux/usb_isp116x.h
+++ b/include/linux/usb_isp116x.h
@@ -19,15 +19,6 @@ struct isp116x_platform_data {
            prevents stopping internal clock, increasing
            thereby power consumption in suspended state. */
         unsigned remote_wakeup_enable:1;
-        /* Hardware reset set/clear. If implemented, this function must:
-           if set == 0,   deassert chip's HW reset pin
-           otherwise,     assert chip's HW reset pin       */
-        void (*reset) (struct device * dev, int set);
-        /* Hardware clock start/stop. If implemented, this function must:
-           if start == 0,    stop the external clock
-           otherwise,        start the external clock
-         */
-        void (*clock) (struct device * dev, int start);
         /* Inter-io delay (ns). The chip is picky about access timings; it
            expects at least:
            150ns delay between consecutive accesses to DATA_REG,