33 files changed, 366 insertions, 623 deletions

diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index d1cd5f93e028..552507fe9a7e 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -281,3 +281,16 @@ Why:	The deferred output hooks are a layering violation causing unusual
 Who:    Patrick McHardy <kaber@trash.net>
 
 ---------------------------
+
+What:   frame diverter
+When:   November 2006
+Why:    The frame diverter is included in most distribution kernels, but is
+        broken. It does not correctly handle many things:
+        - IPV6
+        - non-linear skb's
+        - network device RCU on removal
+        - input frames not correctly checked for protocol errors
+        It also adds allocation overhead even if not enabled.
+        It is not clear if anyone is still using it.
+Who:    Stephen Hemminger <shemminger@osdl.org>
+
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 7947cede8712..87a17337c7f6 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -697,6 +697,12 @@ running once the system is up.
         ips=            [HW,SCSI] Adaptec / IBM ServeRAID controller
                         See header of drivers/scsi/ips.c.
 
+        ports=          [IP_VS_FTP] IPVS ftp helper module
+                        Default is 21.
+                        Up to 8 (IP_VS_APP_MAX_PORTS) ports
+                        may be specified.
+                        Format: <port>,<port>....
+
         irqfixup        [HW]
                         When an interrupt is not handled search all handlers
                         for it. Intended to get systems with badly broken
diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt
index 3e0c017e7877..90ed78110fd4 100644
--- a/Documentation/networking/ip-sysctl.txt
+++ b/Documentation/networking/ip-sysctl.txt
@@ -102,9 +102,15 @@ inet_peer_gc_maxtime - INTEGER
 TCP variables: 
 
 tcp_abc - INTEGER
-        Controls Appropriate Byte Count defined in RFC3465. If set to
-        0 then does congestion avoid once per ack. 1 is conservative
-        value, and 2 is more agressive.
+        Controls Appropriate Byte Count (ABC) defined in RFC3465.
+        ABC is a way of increasing congestion window (cwnd) more slowly
+        in response to partial acknowledgments.
+        Possible values are:
+                0 increase cwnd once per acknowledgment (no ABC)
+                1 increase cwnd once per acknowledgment of full sized segment
+                2 allow increase cwnd by two if acknowledgment is
+                  of two segments to compensate for delayed acknowledgments.
+        Default: 0 (off)
 
 tcp_syn_retries - INTEGER
         Number of times initial SYNs for an active TCP connection attempt
diff --git a/MAINTAINERS b/MAINTAINERS
index d13f98572811..7a08cdbb246a 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -416,7 +416,7 @@ S:	Supported
 ATM
 P:      Chas Williams
 M:      chas@cmf.nrl.navy.mil
-L:      linux-atm-general@lists.sourceforge.net
+L:      linux-atm-general@lists.sourceforge.net (subscribers-only)
 W:      http://linux-atm.sourceforge.net
 S:      Maintained
 
@@ -2828,6 +2828,14 @@ M:	hadi@cyberus.ca
 L:      netdev@vger.kernel.org
 S:      Maintained
 
+TCP LOW PRIORITY MODULE
+P:      Wong Hoi Sing, Edison
+M:      hswong3i@gmail.com
+P:      Hung Hing Lun, Mike
+M:      hlhung3i@gmail.com
+W:      http://tcp-lp-mod.sourceforge.net/
+S:      Maintained
+
 TI OMAP RANDOM NUMBER GENERATOR SUPPORT
 P:      Deepak Saxena
 M:      dsaxena@plexity.net
diff --git a/arch/arm/configs/pnx4008_defconfig b/arch/arm/configs/pnx4008_defconfig
index 8a078d479d57..a4989f44baaa 100644
--- a/arch/arm/configs/pnx4008_defconfig
+++ b/arch/arm/configs/pnx4008_defconfig
@@ -1,14 +1,18 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-rc1
-# Thu Apr  6 17:05:58 2006
+# Linux kernel version: 2.6.18-rc6
+# Mon Sep 11 13:59:24 2006
 #
 CONFIG_ARM=y
 CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
 # Code maturity level options
@@ -28,6 +32,7 @@ CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
 CONFIG_SYSCTL=y
 CONFIG_AUDIT=y
 # CONFIG_IKCONFIG is not set
@@ -44,14 +49,15 @@ CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
 CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_SLOB is not set
-CONFIG_OBSOLETE_INTERMODULE=m
 
 #
 # Loadable module support
@@ -84,18 +90,26 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 #
 # System Type
 #
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
 # CONFIG_ARCH_CLPS7500 is not set
 # CONFIG_ARCH_CLPS711X is not set
 # CONFIG_ARCH_CO285 is not set
 # CONFIG_ARCH_EBSA110 is not set
 # CONFIG_ARCH_EP93XX is not set
 # CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
 # CONFIG_ARCH_IOP3XX is not set
 # CONFIG_ARCH_IXP4XX is not set
 # CONFIG_ARCH_IXP2000 is not set
 # CONFIG_ARCH_IXP23XX is not set
 # CONFIG_ARCH_L7200 is not set
+CONFIG_ARCH_PNX4008=y
 # CONFIG_ARCH_PXA is not set
 # CONFIG_ARCH_RPC is not set
 # CONFIG_ARCH_SA1100 is not set
@@ -103,13 +117,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
 # CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_AT91RM9200 is not set
-CONFIG_ARCH_PNX4008=y
 
 #
 # Processor Type
@@ -138,15 +145,7 @@ CONFIG_ARM_THUMB=y
 #
 # PCCARD (PCMCIA/CardBus) support
 #
-CONFIG_PCCARD=m
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=m
-CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_PCMCIA_IOCTL=y
-
-#
-# PC-card bridges
-#
+# CONFIG_PCCARD is not set
 
 #
 # Kernel Features
@@ -164,13 +163,14 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
 CONFIG_ALIGNMENT_TRAP=y
 
 #
 # Boot options
 #
-CONFIG_ZBOOT_ROM_TEXT=0
-CONFIG_ZBOOT_ROM_BSS=0
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="mem=64M console=ttyS0,115200"
 # CONFIG_XIP_KERNEL is not set
 
@@ -181,7 +181,8 @@ CONFIG_CMDLINE="mem=64M console=ttyS0,115200"
 #
 # At least one emulation must be selected
 #
-# CONFIG_FPE_NWFPE is not set
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
 # CONFIG_FPE_FASTFPE is not set
 # CONFIG_VFP is not set
 
@@ -199,7 +200,7 @@ CONFIG_BINFMT_MISC=m
 CONFIG_PM=y
 CONFIG_PM_LEGACY=y
 # CONFIG_PM_DEBUG is not set
-CONFIG_APM=m
+# CONFIG_APM is not set
 
 #
 # Networking
@@ -210,12 +211,12 @@ CONFIG_NET=y
 # Networking options
 #
 # CONFIG_NETDEBUG is not set
-CONFIG_PACKET=m
+CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
-CONFIG_UNIX=m
+CONFIG_UNIX=y
 CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-CONFIG_NET_KEY=m
+# CONFIG_XFRM_USER is not set
+# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
 CONFIG_IP_ADVANCED_ROUTER=y
@@ -227,10 +228,12 @@ CONFIG_IP_ROUTE_FWMARK=y
 CONFIG_IP_ROUTE_MULTIPATH=y
 # CONFIG_IP_ROUTE_MULTIPATH_CACHED is not set
 CONFIG_IP_ROUTE_VERBOSE=y
-# CONFIG_IP_PNP is not set
-CONFIG_NET_IPIP=m
-CONFIG_NET_IPGRE=m
-CONFIG_NET_IPGRE_BROADCAST=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
 CONFIG_IP_MROUTE=y
 CONFIG_IP_PIMSM_V1=y
 CONFIG_IP_PIMSM_V2=y
@@ -241,6 +244,8 @@ CONFIG_INET_ESP=m
 CONFIG_INET_IPCOMP=m
 CONFIG_INET_XFRM_TUNNEL=m
 CONFIG_INET_TUNNEL=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -287,7 +292,10 @@ CONFIG_INET6_ESP=m
 CONFIG_INET6_IPCOMP=m
 CONFIG_INET6_XFRM_TUNNEL=m
 CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
 CONFIG_IPV6_TUNNEL=m
+# CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
 CONFIG_BRIDGE_NETFILTER=y
@@ -313,6 +321,7 @@ CONFIG_IP_NF_TFTP=m
 CONFIG_IP_NF_AMANDA=m
 # CONFIG_IP_NF_PPTP is not set
 # CONFIG_IP_NF_H323 is not set
+# CONFIG_IP_NF_SIP is not set
 CONFIG_IP_NF_QUEUE=m
 
 #
@@ -384,7 +393,7 @@ CONFIG_LLC2=m
 CONFIG_IPX=m
 # CONFIG_IPX_INTERN is not set
 CONFIG_ATALK=m
-CONFIG_DEV_APPLETALK=y
+CONFIG_DEV_APPLETALK=m
 CONFIG_IPDDP=m
 CONFIG_IPDDP_ENCAP=y
 CONFIG_IPDDP_DECAP=y
@@ -445,110 +454,9 @@ CONFIG_NET_ESTIMATOR=y
 # Network testing
 #
 CONFIG_NET_PKTGEN=m
-CONFIG_HAMRADIO=y
-
-#
-# Packet Radio protocols
-#
-CONFIG_AX25=m
-# CONFIG_AX25_DAMA_SLAVE is not set
-CONFIG_NETROM=m
-CONFIG_ROSE=m
-
-#
-# AX.25 network device drivers
-#
-CONFIG_MKISS=m
-CONFIG_6PACK=m
-CONFIG_BPQETHER=m
-CONFIG_BAYCOM_SER_FDX=m
-CONFIG_BAYCOM_SER_HDX=m
-CONFIG_BAYCOM_PAR=m
-CONFIG_BAYCOM_EPP=m
-CONFIG_YAM=m
-CONFIG_IRDA=m
-
-#
-# IrDA protocols
-#
-CONFIG_IRLAN=m
-CONFIG_IRNET=m
-CONFIG_IRCOMM=m
-# CONFIG_IRDA_ULTRA is not set
-
-#
-# IrDA options
-#
-CONFIG_IRDA_CACHE_LAST_LSAP=y
-CONFIG_IRDA_FAST_RR=y
-CONFIG_IRDA_DEBUG=y
-
-#
-# Infrared-port device drivers
-#
-
-#
-# SIR device drivers
-#
-CONFIG_IRTTY_SIR=m
-
-#
-# Dongle support
-#
-CONFIG_DONGLE=y
-CONFIG_ESI_DONGLE=m
-CONFIG_ACTISYS_DONGLE=m
-CONFIG_TEKRAM_DONGLE=m
-# CONFIG_TOIM3232_DONGLE is not set
-CONFIG_LITELINK_DONGLE=m
-CONFIG_MA600_DONGLE=m
-CONFIG_GIRBIL_DONGLE=m
-CONFIG_MCP2120_DONGLE=m
-CONFIG_OLD_BELKIN_DONGLE=m
-CONFIG_ACT200L_DONGLE=m
-
-#
-# Old SIR device drivers
-#
-CONFIG_IRPORT_SIR=m
-
-#
-# Old Serial dongle support
-#
-# CONFIG_DONGLE_OLD is not set
-
-#
-# FIR device drivers
-#
-CONFIG_USB_IRDA=m
-CONFIG_SIGMATEL_FIR=m
-CONFIG_BT=m
-CONFIG_BT_L2CAP=m
-CONFIG_BT_SCO=m
-CONFIG_BT_RFCOMM=m
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=m
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-CONFIG_BT_CMTP=m
-CONFIG_BT_HIDP=m
-
-#
-# Bluetooth device drivers
-#
-CONFIG_BT_HCIUSB=m
-CONFIG_BT_HCIUSB_SCO=y
-CONFIG_BT_HCIUART=m
-CONFIG_BT_HCIUART_H4=y
-CONFIG_BT_HCIUART_BCSP=y
-CONFIG_BT_HCIBCM203X=m
-# CONFIG_BT_HCIBPA10X is not set
-CONFIG_BT_HCIBFUSB=m
-CONFIG_BT_HCIDTL1=m
-CONFIG_BT_HCIBT3C=m
-CONFIG_BT_HCIBLUECARD=m
-CONFIG_BT_HCIBTUART=m
-CONFIG_BT_HCIVHCI=m
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
 CONFIG_IEEE80211=m
 # CONFIG_IEEE80211_DEBUG is not set
 # CONFIG_IEEE80211_CRYPT_WEP is not set
@@ -566,8 +474,9 @@ CONFIG_WIRELESS_EXT=y
 #
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
 # CONFIG_DEBUG_DRIVER is not set
+# CONFIG_SYS_HYPERVISOR is not set
 
 #
 # Connector - unified userspace <-> kernelspace linker
@@ -577,11 +486,11 @@ CONFIG_FW_LOADER=m
 #
 # Memory Technology Devices (MTD)
 #
-CONFIG_MTD=m
+CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
-CONFIG_MTD_CONCAT=m
+CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_REDBOOT_PARTS=m
+CONFIG_MTD_REDBOOT_PARTS=y
 CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
 # CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
 # CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
@@ -591,22 +500,18 @@ CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
 #
 # User Modules And Translation Layers
 #
-CONFIG_MTD_CHAR=m
-CONFIG_MTD_BLOCK=m
-CONFIG_MTD_BLOCK_RO=m
-CONFIG_FTL=m
-CONFIG_NFTL=m
-CONFIG_NFTL_RW=y
-CONFIG_INFTL=m
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
 # CONFIG_RFD_FTL is not set
 
 #
 # RAM/ROM/Flash chip drivers
 #
-CONFIG_MTD_CFI=m
-CONFIG_MTD_JEDECPROBE=m
-CONFIG_MTD_GEN_PROBE=m
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
 CONFIG_MTD_MAP_BANK_WIDTH_1=y
 CONFIG_MTD_MAP_BANK_WIDTH_2=y
 CONFIG_MTD_MAP_BANK_WIDTH_4=y
@@ -617,36 +522,27 @@ CONFIG_MTD_CFI_I1=y
 CONFIG_MTD_CFI_I2=y
 # CONFIG_MTD_CFI_I4 is not set
 # CONFIG_MTD_CFI_I8 is not set
-CONFIG_MTD_CFI_INTELEXT=m
-CONFIG_MTD_CFI_AMDSTD=m
-CONFIG_MTD_CFI_STAA=m
-CONFIG_MTD_CFI_UTIL=m
-CONFIG_MTD_RAM=m
-CONFIG_MTD_ROM=m
-CONFIG_MTD_ABSENT=m
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
 # CONFIG_MTD_OBSOLETE_CHIPS is not set
 
 #
 # Mapping drivers for chip access
 #
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-CONFIG_MTD_PHYSMAP=m
-CONFIG_MTD_PHYSMAP_START=0x8000000
-CONFIG_MTD_PHYSMAP_LEN=0x4000000
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_IMPA7 is not set
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 # CONFIG_MTD_PLATRAM is not set
 
 #
 # Self-contained MTD device drivers
 #
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
 CONFIG_MTD_SLRAM=m
 CONFIG_MTD_PHRAM=m
 CONFIG_MTD_MTDRAM=m
 CONFIG_MTDRAM_TOTAL_SIZE=4096
 CONFIG_MTDRAM_ERASE_SIZE=128
-CONFIG_MTD_BLKMTD=m
 # CONFIG_MTD_BLOCK2MTD is not set
 
 #
@@ -663,14 +559,12 @@ CONFIG_MTD_DOCPROBE_ADDRESS=0
 #
 # NAND Flash Device Drivers
 #
-CONFIG_MTD_NAND=m
+CONFIG_MTD_NAND=y
 # CONFIG_MTD_NAND_VERIFY_WRITE is not set
-CONFIG_MTD_NAND_IDS=m
-CONFIG_MTD_NAND_DISKONCHIP=m
-# CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED is not set
-CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0
-# CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+CONFIG_MTD_NAND_NANDSIM=m
 
 #
 # OneNAND Flash Device Drivers
@@ -680,15 +574,7 @@ CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0
 #
 # Parallel port support
 #
-CONFIG_PARPORT=m
-CONFIG_PARPORT_PC=m
-CONFIG_PARPORT_PC_FIFO=y
-# CONFIG_PARPORT_PC_SUPERIO is not set
-CONFIG_PARPORT_PC_PCMCIA=m
-CONFIG_PARPORT_NOT_PC=y
-# CONFIG_PARPORT_ARC is not set
-# CONFIG_PARPORT_GSC is not set
-CONFIG_PARPORT_1284=y
+# CONFIG_PARPORT is not set
 
 #
 # Plug and Play support
@@ -697,45 +583,15 @@ CONFIG_PARPORT_1284=y
 #
 # Block devices
 #
-CONFIG_PARIDE=m
-CONFIG_PARIDE_PARPORT=m
-
-#
-# Parallel IDE high-level drivers
-#
-CONFIG_PARIDE_PD=m
-CONFIG_PARIDE_PCD=m
-CONFIG_PARIDE_PF=m
-CONFIG_PARIDE_PT=m
-CONFIG_PARIDE_PG=m
-
-#
-# Parallel IDE protocol modules
-#
-CONFIG_PARIDE_ATEN=m
-CONFIG_PARIDE_BPCK=m
-CONFIG_PARIDE_BPCK6=m
-CONFIG_PARIDE_COMM=m
-CONFIG_PARIDE_DSTR=m
-CONFIG_PARIDE_FIT2=m
-CONFIG_PARIDE_FIT3=m
-CONFIG_PARIDE_EPAT=m
-# CONFIG_PARIDE_EPATC8 is not set
-CONFIG_PARIDE_EPIA=m
-CONFIG_PARIDE_FRIQ=m
-CONFIG_PARIDE_FRPW=m
-CONFIG_PARIDE_KBIC=m
-CONFIG_PARIDE_KTTI=m
-CONFIG_PARIDE_ON20=m
-CONFIG_PARIDE_ON26=m
 # CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=m
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=y
+CONFIG_BLK_DEV_NBD=y
 # CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
@@ -743,34 +599,6 @@ CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_ATA_OVER_ETH is not set
 
 #
-# ATA/ATAPI/MFM/RLL support
-#
-CONFIG_IDE=m
-CONFIG_BLK_DEV_IDE=m
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=m
-# CONFIG_IDEDISK_MULTI_MODE is not set
-CONFIG_BLK_DEV_IDECS=m
-CONFIG_BLK_DEV_IDECD=m
-CONFIG_BLK_DEV_IDETAPE=m
-CONFIG_BLK_DEV_IDEFLOPPY=m
-CONFIG_BLK_DEV_IDESCSI=m
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=m
-# CONFIG_IDE_ARM is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
 # SCSI device support
 #
 # CONFIG_RAID_ATTRS is not set
@@ -808,41 +636,12 @@ CONFIG_SCSI_FC_ATTRS=m
 #
 # CONFIG_ISCSI_TCP is not set
 CONFIG_SCSI_SATA=m
-CONFIG_SCSI_PPA=m
-CONFIG_SCSI_IMM=m
-# CONFIG_SCSI_IZIP_EPP16 is not set
-# CONFIG_SCSI_IZIP_SLOW_CTR is not set
 CONFIG_SCSI_DEBUG=m
 
 #
-# PCMCIA SCSI adapter support
-#
-CONFIG_PCMCIA_AHA152X=m
-CONFIG_PCMCIA_FDOMAIN=m
-CONFIG_PCMCIA_NINJA_SCSI=m
-CONFIG_PCMCIA_QLOGIC=m
-CONFIG_PCMCIA_SYM53C500=m
-
-#
 # Multi-device support (RAID and LVM)
 #
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=m
-CONFIG_MD_LINEAR=m
-CONFIG_MD_RAID0=m
-CONFIG_MD_RAID1=m
-CONFIG_MD_RAID10=m
-CONFIG_MD_RAID5=m
-# CONFIG_MD_RAID5_RESHAPE is not set
-CONFIG_MD_RAID6=m
-CONFIG_MD_MULTIPATH=m
-CONFIG_MD_FAULTY=m
-CONFIG_BLK_DEV_DM=m
-CONFIG_DM_CRYPT=m
-CONFIG_DM_SNAPSHOT=m
-CONFIG_DM_MIRROR=m
-CONFIG_DM_ZERO=m
-# CONFIG_DM_MULTIPATH is not set
+# CONFIG_MD is not set
 
 #
 # Fusion MPT device support
@@ -878,9 +677,6 @@ CONFIG_NET_ETHERNET=y
 CONFIG_MII=m
 # CONFIG_SMC91X is not set
 # CONFIG_DM9000 is not set
-CONFIG_NET_POCKET=y
-CONFIG_DE600=m
-CONFIG_DE620=m
 
 #
 # Ethernet (1000 Mbit)
@@ -904,49 +700,13 @@ CONFIG_NET_RADIO=y
 # Obsolete Wireless cards support (pre-802.11)
 #
 CONFIG_STRIP=m
-CONFIG_PCMCIA_WAVELAN=m
-CONFIG_PCMCIA_NETWAVE=m
-
-#
-# Wireless 802.11 Frequency Hopping cards support
-#
-CONFIG_PCMCIA_RAYCS=m
-
-#
-# Wireless 802.11b ISA/PCI cards support
-#
-CONFIG_HERMES=m
-CONFIG_ATMEL=m
-
-#
-# Wireless 802.11b Pcmcia/Cardbus cards support
-#
-CONFIG_PCMCIA_HERMES=m
-# CONFIG_PCMCIA_SPECTRUM is not set
-CONFIG_AIRO_CS=m
-CONFIG_PCMCIA_ATMEL=m
-CONFIG_PCMCIA_WL3501=m
+# CONFIG_USB_ZD1201 is not set
 # CONFIG_HOSTAP is not set
-CONFIG_NET_WIRELESS=y
-
-#
-# PCMCIA network device support
-#
-CONFIG_NET_PCMCIA=y
-CONFIG_PCMCIA_3C589=m
-CONFIG_PCMCIA_3C574=m
-CONFIG_PCMCIA_FMVJ18X=m
-CONFIG_PCMCIA_PCNET=m
-CONFIG_PCMCIA_NMCLAN=m
-CONFIG_PCMCIA_SMC91C92=m
-CONFIG_PCMCIA_XIRC2PS=m
-CONFIG_PCMCIA_AXNET=m
 
 #
 # Wan interfaces
 #
 CONFIG_WAN=y
-CONFIG_SYNCLINK_SYNCPPP=m
 CONFIG_HDLC=m
 CONFIG_HDLC_RAW=y
 CONFIG_HDLC_RAW_ETH=y
@@ -966,7 +726,6 @@ CONFIG_X25_ASY=m
 #
 # CONFIG_ATM_DUMMY is not set
 CONFIG_ATM_TCP=m
-CONFIG_PLIP=m
 CONFIG_PPP=m
 CONFIG_PPP_MULTILINK=y
 CONFIG_PPP_FILTER=y
@@ -991,114 +750,7 @@ CONFIG_NET_POLL_CONTROLLER=y
 #
 # ISDN subsystem
 #
-CONFIG_ISDN=m
-
-#
-# Old ISDN4Linux
-#
-CONFIG_ISDN_I4L=m
-CONFIG_ISDN_PPP=y
-CONFIG_ISDN_PPP_VJ=y
-CONFIG_ISDN_MPP=y
-CONFIG_IPPP_FILTER=y
-CONFIG_ISDN_PPP_BSDCOMP=m
-CONFIG_ISDN_AUDIO=y
-CONFIG_ISDN_TTY_FAX=y
-CONFIG_ISDN_X25=y
-
-#
-# ISDN feature submodules
-#
-CONFIG_ISDN_DRV_LOOP=m
-CONFIG_ISDN_DIVERSION=m
-
-#
-# ISDN4Linux hardware drivers
-#
-
-#
-# Passive cards
-#
-CONFIG_ISDN_DRV_HISAX=m
-
-#
-# D-channel protocol features
-#
-CONFIG_HISAX_EURO=y
-CONFIG_DE_AOC=y
-# CONFIG_HISAX_NO_SENDCOMPLETE is not set
-# CONFIG_HISAX_NO_LLC is not set
-# CONFIG_HISAX_NO_KEYPAD is not set
-CONFIG_HISAX_1TR6=y
-CONFIG_HISAX_NI1=y
-CONFIG_HISAX_MAX_CARDS=8
-
-#
-# HiSax supported cards
-#
-CONFIG_HISAX_16_3=y
-CONFIG_HISAX_S0BOX=y
-CONFIG_HISAX_FRITZPCI=y
-CONFIG_HISAX_AVM_A1_PCMCIA=y
-CONFIG_HISAX_ELSA=y
-CONFIG_HISAX_DIEHLDIVA=y
-CONFIG_HISAX_SEDLBAUER=y
-CONFIG_HISAX_NICCY=y
-CONFIG_HISAX_GAZEL=y
-CONFIG_HISAX_HFC_SX=y
-# CONFIG_HISAX_DEBUG is not set
-
-#
-# HiSax PCMCIA card service modules
-#
-CONFIG_HISAX_SEDLBAUER_CS=m
-CONFIG_HISAX_ELSA_CS=m
-CONFIG_HISAX_AVM_A1_CS=m
-CONFIG_HISAX_TELES_CS=m
-
-#
-# HiSax sub driver modules
-#
-CONFIG_HISAX_ST5481=m
-CONFIG_HISAX_HFCUSB=m
-# CONFIG_HISAX_HFC4S8S is not set
-CONFIG_HISAX_HDLC=y
-
-#
-# Active cards
-#
-
-#
-# Siemens Gigaset
-#
-# CONFIG_ISDN_DRV_GIGASET is not set
-
-#
-# CAPI subsystem
-#
-CONFIG_ISDN_CAPI=m
-CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON=y
-CONFIG_ISDN_CAPI_MIDDLEWARE=y
-CONFIG_ISDN_CAPI_CAPI20=m
-CONFIG_ISDN_CAPI_CAPIFS_BOOL=y
-CONFIG_ISDN_CAPI_CAPIFS=m
-CONFIG_ISDN_CAPI_CAPIDRV=m
-
-#
-# CAPI hardware drivers
-#
-
-#
-# Active AVM cards
-#
-CONFIG_CAPI_AVM=y
-CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=m
-CONFIG_ISDN_DRV_AVMB1_AVM_CS=m
-
-#
-# Active Eicon DIVA Server cards
-#
-CONFIG_CAPI_EICON=y
+# CONFIG_ISDN is not set
 
 #
 # Input device support
@@ -1108,10 +760,7 @@ CONFIG_INPUT=y
 #
 # Userland interfaces
 #
-CONFIG_INPUT_MOUSEDEV=m
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_MOUSEDEV is not set
 CONFIG_INPUT_JOYDEV=m
 CONFIG_INPUT_TSDEV=m
 CONFIG_INPUT_TSDEV_SCREEN_X=240
@@ -1153,11 +802,9 @@ CONFIG_JOYSTICK_SPACEORB=m
 CONFIG_JOYSTICK_SPACEBALL=m
 CONFIG_JOYSTICK_STINGER=m
 # CONFIG_JOYSTICK_TWIDJOY is not set
-CONFIG_JOYSTICK_DB9=m
-CONFIG_JOYSTICK_GAMECON=m
-CONFIG_JOYSTICK_TURBOGRAFX=m
 CONFIG_JOYSTICK_JOYDUMP=m
 CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_ADS7846 is not set
 CONFIG_TOUCHSCREEN_GUNZE=m
 # CONFIG_TOUCHSCREEN_ELO is not set
 # CONFIG_TOUCHSCREEN_MTOUCH is not set
@@ -1170,7 +817,6 @@ CONFIG_INPUT_UINPUT=m
 #
 CONFIG_SERIO=y
 CONFIG_SERIO_SERPORT=m
-CONFIG_SERIO_PARKBD=m
 CONFIG_SERIO_LIBPS2=y
 CONFIG_SERIO_RAW=m
 CONFIG_GAMEPORT=m
@@ -1183,32 +829,14 @@ CONFIG_GAMEPORT_L4=m
 CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
-CONFIG_SERIAL_NONSTANDARD=y
-CONFIG_COMPUTONE=m
-CONFIG_ROCKETPORT=m
-CONFIG_CYCLADES=m
-# CONFIG_CYZ_INTR is not set
-CONFIG_DIGIEPCA=m
-CONFIG_MOXA_INTELLIO=m
-CONFIG_MOXA_SMARTIO=m
-# CONFIG_ISI is not set
-CONFIG_SYNCLINKMP=m
-CONFIG_N_HDLC=m
-# CONFIG_RISCOM8 is not set
-# CONFIG_SPECIALIX is not set
-CONFIG_SX=m
-CONFIG_RIO=m
-CONFIG_RIO_OLDPCI=y
-CONFIG_STALDRV=y
-CONFIG_STALLION=m
-CONFIG_ISTALLION=m
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
 
 #
 # Serial drivers
 #
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_CS=m
 CONFIG_SERIAL_8250_NR_UARTS=4
 CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 CONFIG_SERIAL_8250_EXTENDED=y
@@ -1225,20 +853,11 @@ CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
-CONFIG_PRINTER=m
-# CONFIG_LP_CONSOLE is not set
-CONFIG_PPDEV=m
-CONFIG_TIPAR=m
 
 #
 # IPMI
 #
-CONFIG_IPMI_HANDLER=m
-# CONFIG_IPMI_PANIC_EVENT is not set
-CONFIG_IPMI_DEVICE_INTERFACE=m
-CONFIG_IPMI_SI=m
-CONFIG_IPMI_WATCHDOG=m
-CONFIG_IPMI_POWEROFF=m
+# CONFIG_IPMI_HANDLER is not set
 
 #
 # Watchdog Cards
@@ -1255,22 +874,15 @@ CONFIG_SOFT_WATCHDOG=m
 # USB-based Watchdog Cards
 #
 CONFIG_USBPCWATCHDOG=m
-CONFIG_NVRAM=m
-CONFIG_DTLK=m
-CONFIG_R3964=m
+CONFIG_HW_RANDOM=y
+# CONFIG_NVRAM is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
 
 #
 # Ftape, the floppy tape device driver
 #
-
-#
-# PCMCIA character devices
-#
-CONFIG_SYNCLINK_CS=m
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-CONFIG_RAW_DRIVER=m
-CONFIG_MAX_RAW_DEVS=256
+# CONFIG_RAW_DRIVER is not set
 
 #
 # TPM devices
@@ -1281,8 +893,8 @@ CONFIG_MAX_RAW_DEVS=256
 #
 # I2C support
 #
-CONFIG_I2C=m
-CONFIG_I2C_CHARDEV=m
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
 
 #
 # I2C Algorithms
@@ -1294,11 +906,10 @@ CONFIG_I2C_ALGOPCA=m
 #
 # I2C Hardware Bus support
 #
-CONFIG_I2C_ISA=m
-CONFIG_I2C_PARPORT=m
-CONFIG_I2C_PARPORT_LIGHT=m
-CONFIG_I2C_STUB=m
-CONFIG_I2C_PCA_ISA=m
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_PCA_ISA is not set
 
 #
 # Miscellaneous I2C Chip support
@@ -1318,66 +929,28 @@ CONFIG_SENSORS_PCF8591=m
 #
 # SPI support
 #
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
 
 #
-# Dallas's 1-wire bus
+# SPI Master Controller Drivers
 #
-CONFIG_W1=m
+CONFIG_SPI_BITBANG=y
 
 #
-# 1-wire Bus Masters
+# SPI Protocol Masters
 #
-# CONFIG_W1_MASTER_DS9490 is not set
-# CONFIG_W1_MASTER_DS2482 is not set
 
 #
-# 1-wire Slaves
+# Dallas's 1-wire bus
 #
-# CONFIG_W1_SLAVE_THERM is not set
-# CONFIG_W1_SLAVE_SMEM is not set
-# CONFIG_W1_SLAVE_DS2433 is not set
 
 #
 # Hardware Monitoring support
 #
-CONFIG_HWMON=y
-CONFIG_HWMON_VID=m
-CONFIG_SENSORS_ADM1021=m
-CONFIG_SENSORS_ADM1025=m
-CONFIG_SENSORS_ADM1026=m
-CONFIG_SENSORS_ADM1031=m
-# CONFIG_SENSORS_ADM9240 is not set
-CONFIG_SENSORS_ASB100=m
-# CONFIG_SENSORS_ATXP1 is not set
-CONFIG_SENSORS_DS1621=m
-# CONFIG_SENSORS_F71805F is not set
-CONFIG_SENSORS_FSCHER=m
-# CONFIG_SENSORS_FSCPOS is not set
-CONFIG_SENSORS_GL518SM=m
-# CONFIG_SENSORS_GL520SM is not set
-CONFIG_SENSORS_IT87=m
-CONFIG_SENSORS_LM63=m
-CONFIG_SENSORS_LM75=m
-CONFIG_SENSORS_LM77=m
-CONFIG_SENSORS_LM78=m
-CONFIG_SENSORS_LM80=m
-CONFIG_SENSORS_LM83=m
-CONFIG_SENSORS_LM85=m
-CONFIG_SENSORS_LM87=m
-CONFIG_SENSORS_LM90=m
-# CONFIG_SENSORS_LM92 is not set
-CONFIG_SENSORS_MAX1619=m
-CONFIG_SENSORS_PC87360=m
-CONFIG_SENSORS_SMSC47M1=m
-# CONFIG_SENSORS_SMSC47B397 is not set
-CONFIG_SENSORS_W83781D=m
-# CONFIG_SENSORS_W83792D is not set
-CONFIG_SENSORS_W83L785TS=m
-CONFIG_SENSORS_W83627HF=m
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
 
 #
 # Misc devices
@@ -1389,9 +962,18 @@ CONFIG_SENSORS_W83627HF=m
 # CONFIG_NEW_LEDS is not set
 
 #
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
 
 #
 # Digital Video Broadcasting Devices
@@ -1460,18 +1042,25 @@ CONFIG_DVB_TDA10021=m
 CONFIG_DVB_STV0297=m
 
 #
-# ATSC (North American/Korean Terresterial DTV) frontends
+# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
 #
 # CONFIG_DVB_NXT200X is not set
 # CONFIG_DVB_OR51211 is not set
 # CONFIG_DVB_OR51132 is not set
 # CONFIG_DVB_BCM3510 is not set
 # CONFIG_DVB_LGDT330X is not set
+
+#
+# Miscellaneous devices
+#
+CONFIG_DVB_LNBP21=m
+# CONFIG_DVB_ISL6421 is not set
 # CONFIG_USB_DABUSB is not set
 
 #
 # Graphics support
 #
+CONFIG_FIRMWARE_EDID=y
 # CONFIG_FB is not set
 
 #
@@ -1479,6 +1068,7 @@ CONFIG_DVB_STV0297=m
 #
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
@@ -1526,17 +1116,12 @@ CONFIG_SND_MPU401=m
 CONFIG_SND_USB_AUDIO=m
 
 #
-# PCMCIA devices
-#
-
-#
 # Open Sound System
 #
 CONFIG_SOUND_PRIME=m
-# CONFIG_OBSOLETE_OSS_DRIVER is not set
+# CONFIG_OSS_OBSOLETE_DRIVER is not set
 # CONFIG_SOUND_MSNDCLAS is not set
 # CONFIG_SOUND_MSNDPIN is not set
-CONFIG_SOUND_TVMIXER=m
 
 #
 # USB support
@@ -1544,7 +1129,7 @@ CONFIG_SOUND_TVMIXER=m
 CONFIG_USB_ARCH_HAS_HCD=y
 # CONFIG_USB_ARCH_HAS_OHCI is not set
 # CONFIG_USB_ARCH_HAS_EHCI is not set
-CONFIG_USB=m
+CONFIG_USB=y
 # CONFIG_USB_DEBUG is not set
 
 #
@@ -1561,7 +1146,6 @@ CONFIG_USB_BANDWIDTH=y
 #
 # CONFIG_USB_ISP116X_HCD is not set
 CONFIG_USB_SL811_HCD=m
-# CONFIG_USB_SL811_CS is not set
 
 #
 # USB Device Class drivers
@@ -1580,7 +1164,6 @@ CONFIG_USB_STORAGE=m
 # CONFIG_USB_STORAGE_DEBUG is not set
 CONFIG_USB_STORAGE_DATAFAB=y
 CONFIG_USB_STORAGE_FREECOM=y
-CONFIG_USB_STORAGE_ISD200=y
 CONFIG_USB_STORAGE_DPCM=y
 CONFIG_USB_STORAGE_USBAT=y
 CONFIG_USB_STORAGE_SDDR09=y
@@ -1608,9 +1191,7 @@ CONFIG_USB_WACOM=m
 # CONFIG_USB_ACECAD is not set
 CONFIG_USB_KBTAB=m
 CONFIG_USB_POWERMATE=m
-CONFIG_USB_MTOUCH=m
-# CONFIG_USB_ITMTOUCH is not set
-CONFIG_USB_EGALAX=m
+# CONFIG_USB_TOUCHSCREEN is not set
 # CONFIG_USB_YEALINK is not set
 CONFIG_USB_XPAD=m
 CONFIG_USB_ATI_REMOTE=m
@@ -1640,13 +1221,11 @@ CONFIG_USB_NET_NET1080=m
 # CONFIG_USB_NET_RNDIS_HOST is not set
 # CONFIG_USB_NET_CDC_SUBSET is not set
 CONFIG_USB_NET_ZAURUS=m
-# CONFIG_USB_ZD1201 is not set
 CONFIG_USB_MON=y
 
 #
 # USB port drivers
 #
-CONFIG_USB_USS720=m
 
 #
 # USB Serial Converter support
@@ -1654,7 +1233,7 @@ CONFIG_USB_USS720=m
 CONFIG_USB_SERIAL=m
 CONFIG_USB_SERIAL_GENERIC=y
 # CONFIG_USB_SERIAL_AIRPRIME is not set
-# CONFIG_USB_SERIAL_ANYDATA is not set
+# CONFIG_USB_SERIAL_ARK3116 is not set
 CONFIG_USB_SERIAL_BELKIN=m
 CONFIG_USB_SERIAL_WHITEHEAT=m
 CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
@@ -1662,6 +1241,7 @@ CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
 CONFIG_USB_SERIAL_CYPRESS_M8=m
 CONFIG_USB_SERIAL_EMPEG=m
 CONFIG_USB_SERIAL_FTDI_SIO=m
+# CONFIG_USB_SERIAL_FUNSOFT is not set
 CONFIG_USB_SERIAL_VISOR=m
 CONFIG_USB_SERIAL_IPAQ=m
 CONFIG_USB_SERIAL_IR=m
@@ -1691,9 +1271,11 @@ CONFIG_USB_SERIAL_PL2303=m
 # CONFIG_USB_SERIAL_HP4X is not set
 CONFIG_USB_SERIAL_SAFE=m
 # CONFIG_USB_SERIAL_SAFE_PADDED is not set
+# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
 # CONFIG_USB_SERIAL_TI is not set
 CONFIG_USB_SERIAL_CYBERJACK=m
 CONFIG_USB_SERIAL_XIRCOM=m
+# CONFIG_USB_SERIAL_OPTION is not set
 CONFIG_USB_SERIAL_OMNINET=m
 CONFIG_USB_EZUSB=y
 
@@ -1707,10 +1289,12 @@ CONFIG_USB_RIO500=m
 CONFIG_USB_LEGOTOWER=m
 CONFIG_USB_LCD=m
 CONFIG_USB_LED=m
+# CONFIG_USB_CYPRESS_CY7C63 is not set
 CONFIG_USB_CYTHERM=m
 CONFIG_USB_PHIDGETKIT=m
 CONFIG_USB_PHIDGETSERVO=m
 # CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_APPLEDISPLAY is not set
 # CONFIG_USB_LD is not set
 CONFIG_USB_TEST=m
 
@@ -1787,7 +1371,6 @@ CONFIG_JFS_POSIX_ACL=y
 CONFIG_JFS_STATISTICS=y
 CONFIG_FS_POSIX_ACL=y
 CONFIG_XFS_FS=m
-CONFIG_XFS_EXPORT=y
 CONFIG_XFS_QUOTA=y
 CONFIG_XFS_SECURITY=y
 CONFIG_XFS_POSIX_ACL=y
@@ -1796,6 +1379,7 @@ CONFIG_XFS_RT=y
 CONFIG_MINIX_FS=m
 CONFIG_ROMFS_FS=m
 CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
 CONFIG_QFMT_V1=m
 CONFIG_QFMT_V2=m
@@ -1856,6 +1440,7 @@ CONFIG_JFFS2_FS=m
 CONFIG_JFFS2_FS_DEBUG=0
 CONFIG_JFFS2_FS_WRITEBUFFER=y
 # CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
 # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
 CONFIG_JFFS2_ZLIB=y
 CONFIG_JFFS2_RTIME=y
@@ -1866,11 +1451,13 @@ CONFIG_HPFS_FS=m
 CONFIG_QNX4FS_FS=m
 CONFIG_SYSV_FS=m
 CONFIG_UFS_FS=m
+# CONFIG_UFS_FS_WRITE is not set
+# CONFIG_UFS_DEBUG is not set
 
 #
 # Network File Systems
 #
-CONFIG_NFS_FS=m
+CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
@@ -1880,19 +1467,22 @@ CONFIG_NFSD_V3=y
 # CONFIG_NFSD_V3_ACL is not set
 CONFIG_NFSD_V4=y
 CONFIG_NFSD_TCP=y
-CONFIG_LOCKD=m
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=m
 CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
-CONFIG_SUNRPC_GSS=m
-CONFIG_RPCSEC_GSS_KRB5=m
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
 CONFIG_RPCSEC_GSS_SPKM3=m
 CONFIG_SMB_FS=m
 # CONFIG_SMB_NLS_DEFAULT is not set
 CONFIG_CIFS=m
 # CONFIG_CIFS_STATS is not set
+# CONFIG_CIFS_WEAK_PW_HASH is not set
 # CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_DEBUG2 is not set
 # CONFIG_CIFS_EXPERIMENTAL is not set
 CONFIG_NCP_FS=m
 CONFIG_NCPFS_PACKET_SIGNING=y
@@ -1940,7 +1530,7 @@ CONFIG_SUN_PARTITION=y
 #
 # Native Language Support
 #
-CONFIG_NLS=y
+CONFIG_NLS=m
 CONFIG_NLS_DEFAULT="cp437"
 CONFIG_NLS_CODEPAGE_437=m
 CONFIG_NLS_CODEPAGE_737=m
@@ -1984,26 +1574,29 @@ CONFIG_NLS_UTF8=m
 #
 # Profiling support
 #
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=m
+# CONFIG_PROFILING is not set
 
 #
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
 CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_KERNEL=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_PREEMPT=y
-CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_RWSEMS is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_DEBUG_VM is not set
 CONFIG_FRAME_POINTER=y
@@ -2013,8 +1606,7 @@ CONFIG_FORCED_INLINING=y
 # CONFIG_DEBUG_USER is not set
 # CONFIG_DEBUG_WAITQ is not set
 # CONFIG_DEBUG_ERRORS is not set
-CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
+# CONFIG_DEBUG_LL is not set
 
 #
 # Security options
@@ -2039,7 +1631,7 @@ CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_WP512=m
 # CONFIG_CRYPTO_TGR192 is not set
-CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_DES=y
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_TWOFISH=m
 CONFIG_CRYPTO_SERPENT=m
@@ -2068,5 +1660,6 @@ CONFIG_CRC32=y
 CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
-CONFIG_REED_SOLOMON=m
-CONFIG_REED_SOLOMON_DEC16=y
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_PLIST=y
diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig
index b4171dd43df0..bbd138be6a70 100644
--- a/arch/arm/mach-s3c2410/Kconfig
+++ b/arch/arm/mach-s3c2410/Kconfig
@@ -81,9 +81,17 @@ config SMDK2440_CPU2442
         depends on ARCH_S3C2440
         select CPU_S3C2442
 
+config MACH_S3C2413
+        bool
+        help
+          Internal node for S3C2413 verison of SMDK2413, so that
+          machine_is_s3c2413() will work when MACH_SMDK2413 is
+          selected
+
 config MACH_SMDK2413
         bool "SMDK2413"
         select CPU_S3C2412
+        select MACH_S3C2413
         select MACH_SMDK
         help
           Say Y here if you are using an SMDK2413
diff --git a/arch/arm/mach-s3c2410/irq.h b/arch/arm/mach-s3c2410/irq.h
index f7cc4c983de5..842a9f42c97b 100644
--- a/arch/arm/mach-s3c2410/irq.h
+++ b/arch/arm/mach-s3c2410/irq.h
@@ -100,5 +100,10 @@ s3c_irqsub_ack(unsigned int irqno, unsigned int parentmask, unsigned int group)
 
 /* exported for use in arch/arm/mach-s3c2410 */
 
+#ifdef CONFIG_PM
 extern int s3c_irq_wake(unsigned int irqno, unsigned int state);
+#else
+#define s3c_irq_wake NULL
+#endif
+
 extern int s3c_irqext_type(unsigned int irq, unsigned int type);
diff --git a/arch/arm/mach-s3c2410/s3c2412.c b/arch/arm/mach-s3c2410/s3c2412.c
index e24ffd5e478b..2d163f7600be 100644
--- a/arch/arm/mach-s3c2410/s3c2412.c
+++ b/arch/arm/mach-s3c2410/s3c2412.c
@@ -35,11 +35,15 @@
 #include <asm/mach/irq.h>
 
 #include <asm/hardware.h>
+#include <asm/proc-fns.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 
+#include <asm/arch/idle.h>
+
 #include <asm/arch/regs-clock.h>
 #include <asm/arch/regs-serial.h>
+#include <asm/arch/regs-power.h>
 #include <asm/arch/regs-gpio.h>
 #include <asm/arch/regs-gpioj.h>
 #include <asm/arch/regs-dsc.h>
@@ -75,6 +79,27 @@ void __init s3c2412_init_uarts(struct s3c2410_uartcfg *cfg, int no)
         s3c_device_nand.name = "s3c2412-nand";
 }
 
+/* s3c2412_idle
+ *
+ * use the standard idle call by ensuring the idle mode
+ * in power config, then issuing the idle co-processor
+ * instruction
+*/
+
+static void s3c2412_idle(void)
+{
+        unsigned long tmp;
+
+        /* ensure our idle mode is to go to idle */
+
+        tmp = __raw_readl(S3C2412_PWRCFG);
+        tmp &= ~S3C2412_PWRCFG_STANDBYWFI_MASK;
+        tmp |= S3C2412_PWRCFG_STANDBYWFI_IDLE;
+        __raw_writel(tmp, S3C2412_PWRCFG);
+
+        cpu_do_idle();
+}
+
 /* s3c2412_map_io
  *
  * register the standard cpu IO areas, and any passed in from the
@@ -87,6 +112,10 @@ void __init s3c2412_map_io(struct map_desc *mach_desc, int mach_size)
 
         s3c24xx_va_gpio2 = S3C24XX_VA_GPIO + 0x10;
 
+        /* set our idle function */
+
+        s3c24xx_idle = s3c2412_idle;
+
         /* register our io-tables */
 
         iotable_init(s3c2412_iodesc, ARRAY_SIZE(s3c2412_iodesc));
diff --git a/arch/arm/mm/proc-xscale.S b/arch/arm/mm/proc-xscale.S
index 561bff73a036..3ca0c92e98a2 100644
--- a/arch/arm/mm/proc-xscale.S
+++ b/arch/arm/mm/proc-xscale.S
@@ -644,7 +644,7 @@ __80219_proc_info:
         .type   __8032x_proc_info,#object
 __8032x_proc_info:
         .long   0x69052420
-        .long   0xffffffe0
+        .long   0xfffff7e0
         .long   PMD_TYPE_SECT | \
                 PMD_SECT_BUFFERABLE | \
                 PMD_SECT_CACHEABLE | \
diff --git a/arch/i386/kernel/entry.S b/arch/i386/kernel/entry.S
index 37a7d2eaf4a0..87f9f60b803b 100644
--- a/arch/i386/kernel/entry.S
+++ b/arch/i386/kernel/entry.S
@@ -209,6 +209,10 @@ ENTRY(ret_from_fork)
         GET_THREAD_INFO(%ebp)
         popl %eax
         CFI_ADJUST_CFA_OFFSET -4
+        pushl $0x0202                   # Reset kernel eflags
+        CFI_ADJUST_CFA_OFFSET 4
+        popfl
+        CFI_ADJUST_CFA_OFFSET -4
         jmp syscall_exit
         CFI_ENDPROC
 
diff --git a/arch/sparc/kernel/sys_sparc.c b/arch/sparc/kernel/sys_sparc.c
index 94ff58c9d4a9..896863fb208a 100644
--- a/arch/sparc/kernel/sys_sparc.c
+++ b/arch/sparc/kernel/sys_sparc.c
@@ -470,19 +470,21 @@ asmlinkage int sys_getdomainname(char __user *name, int len)
 {
         int nlen, err;
         
-        if (len < 0 || len > __NEW_UTS_LEN)
+        if (len < 0)
                 return -EINVAL;
 
         down_read(&uts_sem);
         
         nlen = strlen(system_utsname.domainname) + 1;
-        if (nlen < len)
-                len = nlen;
+        err = -EINVAL;
+        if (nlen > len)
+                goto out;
 
         err = -EFAULT;
-        if (!copy_to_user(name, system_utsname.domainname, len))
+        if (!copy_to_user(name, system_utsname.domainname, nlen))
                 err = 0;
 
+out:
         up_read(&uts_sem);
         return err;
 }
diff --git a/arch/sparc64/kernel/sys_sparc.c b/arch/sparc64/kernel/sys_sparc.c
index bf5f14ee73de..c608c947e6c3 100644
--- a/arch/sparc64/kernel/sys_sparc.c
+++ b/arch/sparc64/kernel/sys_sparc.c
@@ -707,19 +707,21 @@ asmlinkage long sys_getdomainname(char __user *name, int len)
 {
         int nlen, err;
 
-        if (len < 0 || len > __NEW_UTS_LEN)
+        if (len < 0)
                 return -EINVAL;
 
         down_read(&uts_sem);
         
         nlen = strlen(system_utsname.domainname) + 1;
-        if (nlen < len)
-                len = nlen;
+        err = -EINVAL;
+        if (nlen > len)
+                goto out;
 
         err = -EFAULT;
-        if (!copy_to_user(name, system_utsname.domainname, len))
+        if (!copy_to_user(name, system_utsname.domainname, nlen))
                 err = 0;
 
+out:
         up_read(&uts_sem);
         return err;
 }
diff --git a/drivers/atm/he.c b/drivers/atm/he.c
index d369130f4235..dd96123a2b7f 100644
--- a/drivers/atm/he.c
+++ b/drivers/atm/he.c
@@ -2282,6 +2282,8 @@ __enqueue_tpd(struct he_dev *he_dev, struct he_tpd *tpd, unsigned cid)
                                 TPDRQ_MASK(he_readl(he_dev, TPDRQ_B_H)));
 
                 if (new_tail == he_dev->tpdrq_head) {
+                        int slot;
+
                         hprintk("tpdrq full (cid 0x%x)\n", cid);
                         /*
                          * FIXME
@@ -2289,6 +2291,13 @@ __enqueue_tpd(struct he_dev *he_dev, struct he_tpd *tpd, unsigned cid)
                          * after service_tbrq, service the backlog
                          * for now, we just drop the pdu
                          */
+                        for (slot = 0; slot < TPD_MAXIOV; ++slot) {
+                                if (tpd->iovec[slot].addr)
+                                        pci_unmap_single(he_dev->pci_dev,
+                                                tpd->iovec[slot].addr,
+                                                tpd->iovec[slot].len & TPD_LEN_MASK,
+                                                                PCI_DMA_TODEVICE);
+                        }
                         if (tpd->skb) {
                                 if (tpd->vcc->pop)
                                         tpd->vcc->pop(tpd->vcc, tpd->skb);
diff --git a/drivers/sbus/char/openprom.c b/drivers/sbus/char/openprom.c
index 293bb2fdb1d5..2f698763ba5d 100644
--- a/drivers/sbus/char/openprom.c
+++ b/drivers/sbus/char/openprom.c
@@ -145,8 +145,9 @@ static int opromgetprop(void __user *argp, struct device_node *dp, struct openpr
         void *pval;
         int len;
 
-        pval = of_get_property(dp, op->oprom_array, &len);
-        if (!pval || len <= 0 || len > bufsize)
+        if (!dp ||
+            !(pval = of_get_property(dp, op->oprom_array, &len)) ||
+            len <= 0 || len > bufsize)
                 return copyout(argp, op, sizeof(int));
 
         memcpy(op->oprom_array, pval, len);
@@ -161,6 +162,8 @@ static int opromnxtprop(void __user *argp, struct device_node *dp, struct openpr
         struct property *prop;
         int len;
 
+        if (!dp)
+                return copyout(argp, op, sizeof(int));
         if (op->oprom_array[0] == '\0') {
                 prop = dp->properties;
                 if (!prop)
@@ -266,9 +269,13 @@ static int oprompci2node(void __user *argp, struct device_node *dp, struct openp
 
 static int oprompath2node(void __user *argp, struct device_node *dp, struct openpromio *op, int bufsize, DATA *data)
 {
+        phandle ph = 0;
+
         dp = of_find_node_by_path(op->oprom_array);
+        if (dp)
+                ph = dp->node;
         data->current_node = dp;
-        *((int *)op->oprom_array) = dp->node;
+        *((int *)op->oprom_array) = ph;
         op->oprom_size = sizeof(int);
 
         return copyout(argp, op, bufsize + sizeof(int));
diff --git a/drivers/serial/s3c2410.c b/drivers/serial/s3c2410.c
index 392bffcf96e8..95738a19cde7 100644
--- a/drivers/serial/s3c2410.c
+++ b/drivers/serial/s3c2410.c
@@ -1621,7 +1621,7 @@ static struct s3c24xx_uart_info s3c2412_uart_inf = {
 static int s3c2412_serial_probe(struct platform_device *dev)
 {
         dbg("s3c2440_serial_probe: dev=%p\n", dev);
-        return s3c24xx_serial_probe(dev, &s3c2440_uart_inf);
+        return s3c24xx_serial_probe(dev, &s3c2412_uart_inf);
 }
 
 static struct platform_driver s3c2412_serial_drv = {
diff --git a/include/asm-arm/arch-s3c2410/regs-power.h b/include/asm-arm/arch-s3c2410/regs-power.h
new file mode 100644
index 000000000000..6c319ea2afac
--- /dev/null
+++ b/include/asm-arm/arch-s3c2410/regs-power.h
@@ -0,0 +1,34 @@
+/* linux/include/asm/arch-s3c2410/regs-power.h
+ *
+ * Copyright (c) 2003,2004,2005,2006 Simtec Electronics <linux@simtec.co.uk>
+ *                    http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C24XX power control register definitions
+*/
+
+#ifndef __ASM_ARM_REGS_PWR
+#define __ASM_ARM_REGS_PWR __FILE__
+
+#define S3C24XX_PWRREG(x) ((x) + S3C24XX_VA_CLKPWR)
+
+#define S3C2412_PWRMODECON      S3C24XX_PWRREG(0x20)
+#define S3C2412_PWRCFG          S3C24XX_PWRREG(0x24)
+
+#define S3C2412_PWRCFG_BATF_IGNORE              (0<<0)
+#define S3C2412_PWRCFG_BATF_SLEEP               (3<<0)
+#define S3C2412_PWRCFG_BATF_MASK                (3<<0)
+
+#define S3C2412_PWRCFG_STANDBYWFI_IGNORE        (0<<6)
+#define S3C2412_PWRCFG_STANDBYWFI_IDLE          (1<<6)
+#define S3C2412_PWRCFG_STANDBYWFI_STOP          (2<<6)
+#define S3C2412_PWRCFG_STANDBYWFI_SLEEP         (3<<6)
+#define S3C2412_PWRCFG_STANDBYWFI_MASK          (3<<6)
+
+#define S3C2412_PWRCFG_RTC_MASKIRQ              (1<<8)
+#define S3C2412_PWRCFG_NAND_NORST               (1<<9)
+
+#endif /* __ASM_ARM_REGS_PWR */
diff --git a/include/asm-arm/elf.h b/include/asm-arm/elf.h
index 71061ca5c5d0..ae7baa6c73f7 100644
--- a/include/asm-arm/elf.h
+++ b/include/asm-arm/elf.h
@@ -8,7 +8,9 @@
 
 #include <asm/ptrace.h>
 #include <asm/user.h>
+#ifdef __KERNEL
 #include <asm/procinfo.h>
+#endif
 
 typedef unsigned long elf_greg_t;
 typedef unsigned long elf_freg_t[3];
diff --git a/include/asm-arm/page.h b/include/asm-arm/page.h
index 63d12f0244c5..b721270b9986 100644
--- a/include/asm-arm/page.h
+++ b/include/asm-arm/page.h
@@ -193,8 +193,8 @@ extern pmd_t *top_pmd;
 #define ARCH_SLAB_MINALIGN 8
 #endif
 
-#endif /* __KERNEL__ */
-
 #include <asm-generic/page.h>
 
+#endif /* __KERNEL__ */
+
 #endif
diff --git a/include/asm-i386/system.h b/include/asm-i386/system.h
index 49928eb33f8b..098bcee94e38 100644
--- a/include/asm-i386/system.h
+++ b/include/asm-i386/system.h
@@ -11,9 +11,14 @@
 struct task_struct;     /* one of the stranger aspects of C forward declarations.. */
 extern struct task_struct * FASTCALL(__switch_to(struct task_struct *prev, struct task_struct *next));
 
+/*
+ * Saving eflags is important. It switches not only IOPL between tasks,
+ * it also protects other tasks from NT leaking through sysenter etc.
+ */
 #define switch_to(prev,next,last) do {                                  \
         unsigned long esi,edi;                                          \
-        asm volatile("pushl %%ebp\n\t"                                  \
+        asm volatile("pushfl\n\t"               /* Save flags */        \
+                     "pushl %%ebp\n\t"                                  \
                      "movl %%esp,%0\n\t"        /* save ESP */          \
                      "movl %5,%%esp\n\t"        /* restore ESP */       \
                      "movl $1f,%1\n\t"          /* save EIP */          \
@@ -21,6 +26,7 @@ extern struct task_struct * FASTCALL(__switch_to(struct task_struct *prev, struc
                      "jmp __switch_to\n"                                \
                      "1:\t"                                             \
                      "popl %%ebp\n\t"                                   \
+                     "popfl"                                            \
                      :"=m" (prev->thread.esp),"=m" (prev->thread.eip),  \
                       "=a" (last),"=S" (esi),"=D" (edi)                 \
                      :"m" (next->thread.esp),"m" (next->thread.eip),    \
diff --git a/include/linux/netfilter/Kbuild b/include/linux/netfilter/Kbuild
index d06311acd448..1d3a14e2da6e 100644
--- a/include/linux/netfilter/Kbuild
+++ b/include/linux/netfilter/Kbuild
@@ -5,7 +5,7 @@ header-y := nf_conntrack_sctp.h nf_conntrack_tuple_common.h		\
             xt_helper.h xt_length.h xt_limit.h xt_mac.h xt_mark.h       \
             xt_MARK.h xt_multiport.h xt_NFQUEUE.h xt_pkttype.h          \
             xt_policy.h xt_realm.h xt_sctp.h xt_state.h xt_string.h     \
-            xt_tcpmss.h xt_tcpudp.h
+            xt_tcpmss.h xt_tcpudp.h xt_SECMARK.h xt_CONNSECMARK.h
 
 unifdef-y := nf_conntrack_common.h nf_conntrack_ftp.h           \
         nf_conntrack_tcp.h nfnetlink.h x_tables.h xt_physdev.h
diff --git a/net/Kconfig b/net/Kconfig
index c6cec5aa5486..4959a4e1e0fe 100644
--- a/net/Kconfig
+++ b/net/Kconfig
@@ -177,7 +177,7 @@ source "net/lapb/Kconfig"
 
 config NET_DIVERT
         bool "Frame Diverter (EXPERIMENTAL)"
-        depends on EXPERIMENTAL
+        depends on EXPERIMENTAL && BROKEN
         ---help---
           The Frame Diverter allows you to divert packets from the
           network, that are not aimed at the interface receiving it (in
diff --git a/net/atm/clip.c b/net/atm/clip.c
index 7ce7bfe3fbad..7af2c411da82 100644
--- a/net/atm/clip.c
+++ b/net/atm/clip.c
@@ -500,9 +500,11 @@ static int clip_mkip(struct atm_vcc *vcc, int timeout)
                 } else {
                         unsigned int len = skb->len;
 
+                        skb_get(skb);
                         clip_push(vcc, skb);
                         PRIV(skb->dev)->stats.rx_packets--;
                         PRIV(skb->dev)->stats.rx_bytes -= len;
+                        kfree_skb(skb);
                 }
         return 0;
 }
diff --git a/net/bridge/br_stp_bpdu.c b/net/bridge/br_stp_bpdu.c
index a7ba0cce0b46..068d8afbf0a7 100644
--- a/net/bridge/br_stp_bpdu.c
+++ b/net/bridge/br_stp_bpdu.c
@@ -121,7 +121,7 @@ void br_send_tcn_bpdu(struct net_bridge_port *p)
         buf[1] = 0;
         buf[2] = 0;
         buf[3] = BPDU_TYPE_TCN;
-        br_send_bpdu(p, buf, 7);
+        br_send_bpdu(p, buf, 4);
 }
 
 /*
diff --git a/net/core/neighbour.c b/net/core/neighbour.c
index 5130d2efdbbe..fe2113f54e2b 100644
--- a/net/core/neighbour.c
+++ b/net/core/neighbour.c
@@ -1432,6 +1432,9 @@ int neigh_table_clear(struct neigh_table *tbl)
         kfree(tbl->phash_buckets);
         tbl->phash_buckets = NULL;
 
+        free_percpu(tbl->stats);
+        tbl->stats = NULL;
+
         return 0;
 }
 
diff --git a/net/ipv4/ipvs/ip_vs_ftp.c b/net/ipv4/ipvs/ip_vs_ftp.c
index a19a33ceb811..37fafb1fbcff 100644
--- a/net/ipv4/ipvs/ip_vs_ftp.c
+++ b/net/ipv4/ipvs/ip_vs_ftp.c
@@ -46,14 +46,7 @@
  */
 static int ports[IP_VS_APP_MAX_PORTS] = {21, 0};
 module_param_array(ports, int, NULL, 0);
-
-/*
- *      Debug level
- */
-#ifdef CONFIG_IP_VS_DEBUG
-static int debug=0;
-module_param(debug, int, 0);
-#endif
+MODULE_PARM_DESC(ports, "Ports to monitor for FTP control commands");
 
 
 /*      Dummy variable */
@@ -177,7 +170,7 @@ static int ip_vs_ftp_out(struct ip_vs_app *app, struct ip_vs_conn *cp,
                                            &start, &end) != 1)
                         return 1;
 
-                IP_VS_DBG(1-debug, "PASV response (%u.%u.%u.%u:%d) -> "
+                IP_VS_DBG(7, "PASV response (%u.%u.%u.%u:%d) -> "
                           "%u.%u.%u.%u:%d detected\n",
                           NIPQUAD(from), ntohs(port), NIPQUAD(cp->caddr), 0);
 
@@ -280,7 +273,7 @@ static int ip_vs_ftp_in(struct ip_vs_app *app, struct ip_vs_conn *cp,
         while (data <= data_limit - 6) {
                 if (strnicmp(data, "PASV\r\n", 6) == 0) {
                         /* Passive mode on */
-                        IP_VS_DBG(1-debug, "got PASV at %zd of %zd\n",
+                        IP_VS_DBG(7, "got PASV at %zd of %zd\n",
                                   data - data_start,
                                   data_limit - data_start);
                         cp->app_data = &ip_vs_ftp_pasv;
@@ -302,7 +295,7 @@ static int ip_vs_ftp_in(struct ip_vs_app *app, struct ip_vs_conn *cp,
                                    &start, &end) != 1)
                 return 1;
 
-        IP_VS_DBG(1-debug, "PORT %u.%u.%u.%u:%d detected\n",
+        IP_VS_DBG(7, "PORT %u.%u.%u.%u:%d detected\n",
                   NIPQUAD(to), ntohs(port));
 
         /* Passive mode off */
@@ -311,7 +304,7 @@ static int ip_vs_ftp_in(struct ip_vs_app *app, struct ip_vs_conn *cp,
         /*
          * Now update or create a connection entry for it
          */
-        IP_VS_DBG(1-debug, "protocol %s %u.%u.%u.%u:%d %u.%u.%u.%u:%d\n",
+        IP_VS_DBG(7, "protocol %s %u.%u.%u.%u:%d %u.%u.%u.%u:%d\n",
                   ip_vs_proto_name(iph->protocol),
                   NIPQUAD(to), ntohs(port), NIPQUAD(cp->vaddr), 0);
 
@@ -372,11 +365,17 @@ static int __init ip_vs_ftp_init(void)
         for (i=0; i<IP_VS_APP_MAX_PORTS; i++) {
                 if (!ports[i])
                         continue;
+                if (ports[i] < 0 || ports[i] > 0xffff) {
+                        IP_VS_WARNING("ip_vs_ftp: Ignoring invalid "
+                                      "configuration port[%d] = %d\n",
+                                      i, ports[i]);
+                        continue;
+                }
                 ret = register_ip_vs_app_inc(app, app->protocol, ports[i]);
                 if (ret)
                         break;
-                IP_VS_DBG(1-debug, "%s: loaded support on port[%d] = %d\n",
-                          app->name, i, ports[i]);
+                IP_VS_INFO("%s: loaded support on port[%d] = %d\n",
+                           app->name, i, ports[i]);
         }
 
         if (ret)
diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c
index 111ff39a08c5..159fa3f1ba67 100644
--- a/net/ipv4/tcp_input.c
+++ b/net/ipv4/tcp_input.c
@@ -89,7 +89,7 @@ int sysctl_tcp_frto;
 int sysctl_tcp_nometrics_save;
 
 int sysctl_tcp_moderate_rcvbuf = 1;
-int sysctl_tcp_abc = 1;
+int sysctl_tcp_abc;
 
 #define FLAG_DATA               0x01 /* Incoming frame contained data.          */
 #define FLAG_WIN_UPDATE         0x02 /* Incoming ACK was a window update.       */
diff --git a/net/ipv4/tcp_lp.c b/net/ipv4/tcp_lp.c
index 1f977b6ee9a1..48f28d617ce6 100644
--- a/net/ipv4/tcp_lp.c
+++ b/net/ipv4/tcp_lp.c
@@ -3,13 +3,8 @@
  *
  * TCP Low Priority is a distributed algorithm whose goal is to utilize only
  *   the excess network bandwidth as compared to the ``fair share`` of
- *   bandwidth as targeted by TCP. Available from:
- *     http://www.ece.rice.edu/~akuzma/Doc/akuzma/TCP-LP.pdf
+ *   bandwidth as targeted by TCP.
  *
- * Original Author:
- *   Aleksandar Kuzmanovic <akuzma@northwestern.edu>
- *
- * See http://www-ece.rice.edu/networks/TCP-LP/ for their implementation.
  * As of 2.6.13, Linux supports pluggable congestion control algorithms.
  * Due to the limitation of the API, we take the following changes from
  * the original TCP-LP implementation:
@@ -24,11 +19,20 @@
  *   o OWD is handled in relative format, where local time stamp will in
  *     tcp_time_stamp format.
  *
- * Port from 2.4.19 to 2.6.16 as module by:
- *   Wong Hoi Sing Edison <hswong3i@gmail.com>
- *   Hung Hing Lun <hlhung3i@gmail.com>
+ * Original Author:
+ *   Aleksandar Kuzmanovic <akuzma@northwestern.edu>
+ * Available from:
+ *   http://www.ece.rice.edu/~akuzma/Doc/akuzma/TCP-LP.pdf
+ * Original implementation for 2.4.19:
+ *   http://www-ece.rice.edu/networks/TCP-LP/
  *
- * Version: $Id: tcp_lp.c,v 1.22 2006-05-02 18:18:19 hswong3i Exp $
+ * 2.6.x module Authors:
+ *   Wong Hoi Sing, Edison <hswong3i@gmail.com>
+ *   Hung Hing Lun, Mike <hlhung3i@gmail.com>
+ * SourceForge project page:
+ *   http://tcp-lp-mod.sourceforge.net/
+ *
+ * Version: $Id: tcp_lp.c,v 1.24 2006/09/05 20:22:53 hswong3i Exp $
  */
 
 #include <linux/config.h>
@@ -153,16 +157,19 @@ static u32 tcp_lp_remote_hz_estimator(struct sock *sk)
         if (m < 0)
                 m = -m;
 
-        if (rhz != 0) {
+        if (rhz > 0) {
                 m -= rhz >> 6;  /* m is now error in remote HZ est */
                 rhz += m;       /* 63/64 old + 1/64 new */
         } else
                 rhz = m << 6;
 
+ out:
         /* record time for successful remote HZ calc */
-        lp->flag |= LP_VALID_RHZ;
+        if (rhz > 0)
+                lp->flag |= LP_VALID_RHZ;
+        else
+                lp->flag &= ~LP_VALID_RHZ;
 
- out:
         /* record reference time stamp */
         lp->remote_ref_time = tp->rx_opt.rcv_tsval;
         lp->local_ref_time = tp->rx_opt.rcv_tsecr;
@@ -333,6 +340,6 @@ static void __exit tcp_lp_unregister(void)
 module_init(tcp_lp_register);
 module_exit(tcp_lp_unregister);
 
-MODULE_AUTHOR("Wong Hoi Sing Edison, Hung Hing Lun");
+MODULE_AUTHOR("Wong Hoi Sing Edison, Hung Hing Lun Mike");
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("TCP Low Priority");
diff --git a/net/ipv6/datagram.c b/net/ipv6/datagram.c
index 99a6eb23378b..3b55b4c8e2d1 100644
--- a/net/ipv6/datagram.c
+++ b/net/ipv6/datagram.c
@@ -696,7 +696,7 @@ int datagram_send_ctl(struct msghdr *msg, struct flowi *fl,
                         }
 
                         tc = *(int *)CMSG_DATA(cmsg);
-                        if (tc < 0 || tc > 0xff)
+                        if (tc < -1 || tc > 0xff)
                                 goto exit_f;
 
                         err = 0;
diff --git a/net/ipv6/icmp.c b/net/ipv6/icmp.c
index 3d6e9a351150..356a8a7ef22a 100644
--- a/net/ipv6/icmp.c
+++ b/net/ipv6/icmp.c
@@ -401,7 +401,7 @@ void icmpv6_send(struct sk_buff *skb, int type, int code, __u32 info,
         if (hlimit < 0)
                 hlimit = ipv6_get_hoplimit(dst->dev);
 
-        tclass = np->cork.tclass;
+        tclass = np->tclass;
         if (tclass < 0)
                 tclass = 0;
 
@@ -497,7 +497,7 @@ static void icmpv6_echo_reply(struct sk_buff *skb)
         if (hlimit < 0)
                 hlimit = ipv6_get_hoplimit(dst->dev);
 
-        tclass = np->cork.tclass;
+        tclass = np->tclass;
         if (tclass < 0)
                 tclass = 0;
 
diff --git a/net/ipv6/ipv6_sockglue.c b/net/ipv6/ipv6_sockglue.c
index 43327264e69c..a5eaaf693abf 100644
--- a/net/ipv6/ipv6_sockglue.c
+++ b/net/ipv6/ipv6_sockglue.c
@@ -362,7 +362,7 @@ static int do_ipv6_setsockopt(struct sock *sk, int level, int optname,
                 break;
 
         case IPV6_TCLASS:
-                if (val < 0 || val > 0xff)
+                if (val < -1 || val > 0xff)
                         goto e_inval;
                 np->tclass = val;
                 retv = 0;
@@ -947,6 +947,8 @@ static int do_ipv6_getsockopt(struct sock *sk, int level, int optname,
 
         case IPV6_TCLASS:
                 val = np->tclass;
+                if (val < 0)
+                        val = 0;
                 break;
 
         case IPV6_RECVTCLASS:
diff --git a/net/ipv6/raw.c b/net/ipv6/raw.c
index d57e61ce4a7d..15b862d8acab 100644
--- a/net/ipv6/raw.c
+++ b/net/ipv6/raw.c
@@ -781,7 +781,7 @@ static int rawv6_sendmsg(struct kiocb *iocb, struct sock *sk,
         }
 
         if (tclass < 0) {
-                tclass = np->cork.tclass;
+                tclass = np->tclass;
                 if (tclass < 0)
                         tclass = 0;
         }
diff --git a/net/packet/af_packet.c b/net/packet/af_packet.c
index f9cef3671593..4172a5235916 100644
--- a/net/packet/af_packet.c
+++ b/net/packet/af_packet.c
@@ -626,8 +626,6 @@ static int tpacket_rcv(struct sk_buff *skb, struct net_device *dev, struct packe
                 if ((int)snaplen < 0)
                         snaplen = 0;
         }
-        if (snaplen > skb->len-skb->data_len)
-                snaplen = skb->len-skb->data_len;
 
         spin_lock(&sk->sk_receive_queue.lock);
         h = (struct tpacket_hdr *)packet_lookup_frame(po, po->head);
@@ -644,7 +642,7 @@ static int tpacket_rcv(struct sk_buff *skb, struct net_device *dev, struct packe
                 status &= ~TP_STATUS_LOSING;
         spin_unlock(&sk->sk_receive_queue.lock);
 
-        memcpy((u8*)h + macoff, skb->data, snaplen);
+        skb_copy_bits(skb, 0, (u8*)h + macoff, snaplen);
 
         h->tp_len = skb->len;
         h->tp_snaplen = snaplen;
diff --git a/net/sched/sch_generic.c b/net/sched/sch_generic.c
index 0834c2ee9174..6f9151899795 100644
--- a/net/sched/sch_generic.c
+++ b/net/sched/sch_generic.c
@@ -238,9 +238,7 @@ void __netdev_watchdog_up(struct net_device *dev)
 
 static void dev_watchdog_up(struct net_device *dev)
 {
-        netif_tx_lock_bh(dev);
         __netdev_watchdog_up(dev);
-        netif_tx_unlock_bh(dev);
 }
 
 static void dev_watchdog_down(struct net_device *dev)