1 files changed, 34 insertions, 12 deletions

diff --git a/drivers/ata/pata_hpt3x3.c b/drivers/ata/pata_hpt3x3.c
index d216cc564b56..e9fb029f28b7 100644
--- a/drivers/ata/pata_hpt3x3.c
+++ b/drivers/ata/pata_hpt3x3.c
@@ -23,7 +23,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME        "pata_hpt3x3"
-#define DRV_VERSION     "0.4.1"
+#define DRV_VERSION     "0.4.2"
 
 static int hpt3x3_probe_init(struct ata_port *ap)
 {
@@ -120,6 +120,8 @@ static struct scsi_host_template hpt3x3_sht = {
         .slave_configure        = ata_scsi_slave_config,
         .slave_destroy          = ata_scsi_slave_destroy,
         .bios_param             = ata_std_bios_param,
+        .resume                 = ata_scsi_device_resume,
+        .suspend                = ata_scsi_device_suspend,
 };
 
 static struct ata_port_operations hpt3x3_port_ops = {
@@ -158,6 +160,27 @@ static struct ata_port_operations hpt3x3_port_ops = {
 };
 
 /**
+ *      hpt3x3_init_chipset     -       chip setup
+ *      @dev: PCI device
+ *
+ *      Perform the setup required at boot and on resume.
+ */
+ 
+static void hpt3x3_init_chipset(struct pci_dev *dev)
+{
+        u16 cmd;
+        /* Initialize the board */
+        pci_write_config_word(dev, 0x80, 0x00);
+        /* Check if it is a 343 or a 363. 363 has COMMAND_MEMORY set */
+        pci_read_config_word(dev, PCI_COMMAND, &cmd);
+        if (cmd & PCI_COMMAND_MEMORY)
+                pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0xF0);
+        else
+                pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0x20);
+}
+
+
+/**
  *      hpt3x3_init_one         -       Initialise an HPT343/363
  *      @dev: PCI device
  *      @id: Entry in match table
@@ -178,21 +201,18 @@ static int hpt3x3_init_one(struct pci_dev *dev, const struct pci_device_id *id)
                 .port_ops = &hpt3x3_port_ops
         };
         static struct ata_port_info *port_info[2] = { &info, &info };
-        u16 cmd;
-
-        /* Initialize the board */
-        pci_write_config_word(dev, 0x80, 0x00);
-        /* Check if it is a 343 or a 363. 363 has COMMAND_MEMORY set */
-        pci_read_config_word(dev, PCI_COMMAND, &cmd);
-        if (cmd & PCI_COMMAND_MEMORY)
-                pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0xF0);
-        else
-                pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0x20);
 
+        hpt3x3_init_chipset(dev);
         /* Now kick off ATA set up */
         return ata_pci_init_one(dev, port_info, 2);
 }
 
+static int hpt3x3_reinit_one(struct pci_dev *dev)
+{
+        hpt3x3_init_chipset(dev);
+        return ata_pci_device_resume(dev);
+}
+
 static const struct pci_device_id hpt3x3[] = {
         { PCI_VDEVICE(TTI, PCI_DEVICE_ID_TTI_HPT343), },
 
@@ -203,7 +223,9 @@ static struct pci_driver hpt3x3_pci_driver = {
         .name           = DRV_NAME,
         .id_table       = hpt3x3,
         .probe          = hpt3x3_init_one,
-        .remove         = ata_pci_remove_one
+        .remove         = ata_pci_remove_one,
+        .suspend        = ata_pci_device_suspend,
+        .resume         = hpt3x3_reinit_one,
 };
 
 static int __init hpt3x3_init(void)