2 files changed, 293 insertions, 6 deletions

diff --git a/drivers/net/niu.c b/drivers/net/niu.c
index d8463b1c3df3..be6b4d7e2bb4 100644
--- a/drivers/net/niu.c
+++ b/drivers/net/niu.c
@@ -406,7 +406,7 @@ static int esr2_set_rx_cfg(struct niu *np, unsigned long channel, u32 val)
 }
 
 /* Mode is always 10G fiber.  */
-static int serdes_init_niu(struct niu *np)
+static int serdes_init_niu_10g_fiber(struct niu *np)
 {
         struct niu_link_config *lp = &np->link_config;
         u32 tx_cfg, rx_cfg;
@@ -443,6 +443,223 @@ static int serdes_init_niu(struct niu *np)
         return 0;
 }
 
+static int serdes_init_niu_1g_serdes(struct niu *np)
+{
+        struct niu_link_config *lp = &np->link_config;
+        u16 pll_cfg, pll_sts;
+        int max_retry = 100;
+        u64 sig, mask, val;
+        u32 tx_cfg, rx_cfg;
+        unsigned long i;
+        int err;
+
+        tx_cfg = (PLL_TX_CFG_ENTX | PLL_TX_CFG_SWING_1375MV |
+                  PLL_TX_CFG_RATE_HALF);
+        rx_cfg = (PLL_RX_CFG_ENRX | PLL_RX_CFG_TERM_0P8VDDT |
+                  PLL_RX_CFG_ALIGN_ENA | PLL_RX_CFG_LOS_LTHRESH |
+                  PLL_RX_CFG_RATE_HALF);
+
+        if (np->port == 0)
+                rx_cfg |= PLL_RX_CFG_EQ_LP_ADAPTIVE;
+
+        if (lp->loopback_mode == LOOPBACK_PHY) {
+                u16 test_cfg = PLL_TEST_CFG_LOOPBACK_CML_DIS;
+
+                mdio_write(np, np->port, NIU_ESR2_DEV_ADDR,
+                           ESR2_TI_PLL_TEST_CFG_L, test_cfg);
+
+                tx_cfg |= PLL_TX_CFG_ENTEST;
+                rx_cfg |= PLL_RX_CFG_ENTEST;
+        }
+
+        /* Initialize PLL for 1G */
+        pll_cfg = (PLL_CFG_ENPLL | PLL_CFG_MPY_8X);
+
+        err = mdio_write(np, np->port, NIU_ESR2_DEV_ADDR,
+                         ESR2_TI_PLL_CFG_L, pll_cfg);
+        if (err) {
+                dev_err(np->device, PFX "NIU Port %d "
+                        "serdes_init_niu_1g_serdes: "
+                        "mdio write to ESR2_TI_PLL_CFG_L failed", np->port);
+                return err;
+        }
+
+        pll_sts = PLL_CFG_ENPLL;
+
+        err = mdio_write(np, np->port, NIU_ESR2_DEV_ADDR,
+                         ESR2_TI_PLL_STS_L, pll_sts);
+        if (err) {
+                dev_err(np->device, PFX "NIU Port %d "
+                        "serdes_init_niu_1g_serdes: "
+                        "mdio write to ESR2_TI_PLL_STS_L failed", np->port);
+                return err;
+        }
+
+        udelay(200);
+
+        /* Initialize all 4 lanes of the SERDES.  */
+        for (i = 0; i < 4; i++) {
+                err = esr2_set_tx_cfg(np, i, tx_cfg);
+                if (err)
+                        return err;
+        }
+
+        for (i = 0; i < 4; i++) {
+                err = esr2_set_rx_cfg(np, i, rx_cfg);
+                if (err)
+                        return err;
+        }
+
+        switch (np->port) {
+        case 0:
+                val = (ESR_INT_SRDY0_P0 | ESR_INT_DET0_P0);
+                mask = val;
+                break;
+
+        case 1:
+                val = (ESR_INT_SRDY0_P1 | ESR_INT_DET0_P1);
+                mask = val;
+                break;
+
+        default:
+                return -EINVAL;
+        }
+
+        while (max_retry--) {
+                sig = nr64(ESR_INT_SIGNALS);
+                if ((sig & mask) == val)
+                        break;
+
+                mdelay(500);
+        }
+
+        if ((sig & mask) != val) {
+                dev_err(np->device, PFX "Port %u signal bits [%08x] are not "
+                        "[%08x]\n", np->port, (int) (sig & mask), (int) val);
+                return -ENODEV;
+        }
+
+        return 0;
+}
+
+static int serdes_init_niu_10g_serdes(struct niu *np)
+{
+        struct niu_link_config *lp = &np->link_config;
+        u32 tx_cfg, rx_cfg, pll_cfg, pll_sts;
+        int max_retry = 100;
+        u64 sig, mask, val;
+        unsigned long i;
+        int err;
+
+        tx_cfg = (PLL_TX_CFG_ENTX | PLL_TX_CFG_SWING_1375MV);
+        rx_cfg = (PLL_RX_CFG_ENRX | PLL_RX_CFG_TERM_0P8VDDT |
+                  PLL_RX_CFG_ALIGN_ENA | PLL_RX_CFG_LOS_LTHRESH |
+                  PLL_RX_CFG_EQ_LP_ADAPTIVE);
+
+        if (lp->loopback_mode == LOOPBACK_PHY) {
+                u16 test_cfg = PLL_TEST_CFG_LOOPBACK_CML_DIS;
+
+                mdio_write(np, np->port, NIU_ESR2_DEV_ADDR,
+                           ESR2_TI_PLL_TEST_CFG_L, test_cfg);
+
+                tx_cfg |= PLL_TX_CFG_ENTEST;
+                rx_cfg |= PLL_RX_CFG_ENTEST;
+        }
+
+        /* Initialize PLL for 10G */
+        pll_cfg = (PLL_CFG_ENPLL | PLL_CFG_MPY_10X);
+
+        err = mdio_write(np, np->port, NIU_ESR2_DEV_ADDR,
+                         ESR2_TI_PLL_CFG_L, pll_cfg & 0xffff);
+        if (err) {
+                dev_err(np->device, PFX "NIU Port %d "
+                        "serdes_init_niu_10g_serdes: "
+                        "mdio write to ESR2_TI_PLL_CFG_L failed", np->port);
+                return err;
+        }
+
+        pll_sts = PLL_CFG_ENPLL;
+
+        err = mdio_write(np, np->port, NIU_ESR2_DEV_ADDR,
+                         ESR2_TI_PLL_STS_L, pll_sts & 0xffff);
+        if (err) {
+                dev_err(np->device, PFX "NIU Port %d "
+                        "serdes_init_niu_10g_serdes: "
+                        "mdio write to ESR2_TI_PLL_STS_L failed", np->port);
+                return err;
+        }
+
+        udelay(200);
+
+        /* Initialize all 4 lanes of the SERDES.  */
+        for (i = 0; i < 4; i++) {
+                err = esr2_set_tx_cfg(np, i, tx_cfg);
+                if (err)
+                        return err;
+        }
+
+        for (i = 0; i < 4; i++) {
+                err = esr2_set_rx_cfg(np, i, rx_cfg);
+                if (err)
+                        return err;
+        }
+
+        /* check if serdes is ready */
+
+        switch (np->port) {
+        case 0:
+                mask = ESR_INT_SIGNALS_P0_BITS;
+                val = (ESR_INT_SRDY0_P0 |
+                       ESR_INT_DET0_P0 |
+                       ESR_INT_XSRDY_P0 |
+                       ESR_INT_XDP_P0_CH3 |
+                       ESR_INT_XDP_P0_CH2 |
+                       ESR_INT_XDP_P0_CH1 |
+                       ESR_INT_XDP_P0_CH0);
+                break;
+
+        case 1:
+                mask = ESR_INT_SIGNALS_P1_BITS;
+                val = (ESR_INT_SRDY0_P1 |
+                       ESR_INT_DET0_P1 |
+                       ESR_INT_XSRDY_P1 |
+                       ESR_INT_XDP_P1_CH3 |
+                       ESR_INT_XDP_P1_CH2 |
+                       ESR_INT_XDP_P1_CH1 |
+                       ESR_INT_XDP_P1_CH0);
+                break;
+
+        default:
+                return -EINVAL;
+        }
+
+        while (max_retry--) {
+                sig = nr64(ESR_INT_SIGNALS);
+                if ((sig & mask) == val)
+                        break;
+
+                mdelay(500);
+        }
+
+        if ((sig & mask) != val) {
+                pr_info(PFX "NIU Port %u signal bits [%08x] are not "
+                        "[%08x] for 10G...trying 1G\n",
+                        np->port, (int) (sig & mask), (int) val);
+
+                /* 10G failed, try initializing at 1G */
+                err = serdes_init_niu_1g_serdes(np);
+                if (!err) {
+                        np->flags &= ~NIU_FLAGS_10G;
+                        np->mac_xcvr = MAC_XCVR_PCS;
+                }  else {
+                        dev_err(np->device, PFX "Port %u 10G/1G SERDES "
+                                "Link Failed \n", np->port);
+                        return -ENODEV;
+                }
+        }
+        return 0;
+}
+
 static int esr_read_rxtx_ctrl(struct niu *np, unsigned long chan, u32 *val)
 {
         int err;
@@ -1954,13 +2171,23 @@ static const struct niu_phy_ops phy_ops_10g_serdes = {
         .link_status            = link_status_10g_serdes,
 };
 
+static const struct niu_phy_ops phy_ops_10g_serdes_niu = {
+        .serdes_init            = serdes_init_niu_10g_serdes,
+        .link_status            = link_status_10g_serdes,
+};
+
+static const struct niu_phy_ops phy_ops_1g_serdes_niu = {
+        .serdes_init            = serdes_init_niu_1g_serdes,
+        .link_status            = link_status_1g_serdes,
+};
+
 static const struct niu_phy_ops phy_ops_1g_rgmii = {
         .xcvr_init              = xcvr_init_1g_rgmii,
         .link_status            = link_status_1g_rgmii,
 };
 
 static const struct niu_phy_ops phy_ops_10g_fiber_niu = {
-        .serdes_init            = serdes_init_niu,
+        .serdes_init            = serdes_init_niu_10g_fiber,
         .xcvr_init              = xcvr_init_10g,
         .link_status            = link_status_10g,
 };
@@ -1998,11 +2225,21 @@ struct niu_phy_template {
         u32                             phy_addr_base;
 };
 
-static const struct niu_phy_template phy_template_niu = {
+static const struct niu_phy_template phy_template_niu_10g_fiber = {
         .ops            = &phy_ops_10g_fiber_niu,
         .phy_addr_base  = 16,
 };
 
+static const struct niu_phy_template phy_template_niu_10g_serdes = {
+        .ops            = &phy_ops_10g_serdes_niu,
+        .phy_addr_base  = 0,
+};
+
+static const struct niu_phy_template phy_template_niu_1g_serdes = {
+        .ops            = &phy_ops_1g_serdes_niu,
+        .phy_addr_base  = 0,
+};
+
 static const struct niu_phy_template phy_template_10g_fiber = {
         .ops            = &phy_ops_10g_fiber,
         .phy_addr_base  = 8,
@@ -2182,8 +2419,25 @@ static int niu_determine_phy_disposition(struct niu *np)
         u32 phy_addr_off = 0;
 
         if (plat_type == PLAT_TYPE_NIU) {
-                tp = &phy_template_niu;
-                phy_addr_off += np->port;
+                switch (np->flags &
+                        (NIU_FLAGS_10G |
+                         NIU_FLAGS_FIBER |
+                         NIU_FLAGS_XCVR_SERDES)) {
+                case NIU_FLAGS_10G | NIU_FLAGS_XCVR_SERDES:
+                        /* 10G Serdes */
+                        tp = &phy_template_niu_10g_serdes;
+                        break;
+                case NIU_FLAGS_XCVR_SERDES:
+                        /* 1G Serdes */
+                        tp = &phy_template_niu_1g_serdes;
+                        break;
+                case NIU_FLAGS_10G | NIU_FLAGS_FIBER:
+                        /* 10G Fiber */
+                default:
+                        tp = &phy_template_niu_10g_fiber;
+                        phy_addr_off += np->port;
+                        break;
+                }
         } else {
                 switch (np->flags &
                         (NIU_FLAGS_10G |
@@ -7213,6 +7467,12 @@ static int __devinit niu_phy_type_prop_decode(struct niu *np,
                 np->flags |= NIU_FLAGS_10G;
                 np->flags &= ~NIU_FLAGS_FIBER;
                 np->mac_xcvr = MAC_XCVR_XPCS;
+        } else if (!strcmp(phy_prop, "xgsd") || !strcmp(phy_prop, "gsd")) {
+                /* 10G Serdes or 1G Serdes, default to 10G */
+                np->flags |= NIU_FLAGS_10G;
+                np->flags &= ~NIU_FLAGS_FIBER;
+                np->flags |= NIU_FLAGS_XCVR_SERDES;
+                np->mac_xcvr = MAC_XCVR_XPCS;
         } else {
                 return -EINVAL;
         }
@@ -7741,6 +8001,8 @@ static int __devinit walk_phys(struct niu *np, struct niu_parent *parent)
         u32 val;
         int err;
 
+        num_10g = num_1g = 0;
+
         if (!strcmp(np->vpd.model, NIU_ALONSO_MDL_STR) ||
             !strcmp(np->vpd.model, NIU_KIMI_MDL_STR)) {
                 num_10g = 0;
@@ -7757,6 +8019,16 @@ static int __devinit walk_phys(struct niu *np, struct niu_parent *parent)
                 parent->num_ports = 2;
                 val = (phy_encode(PORT_TYPE_10G, 0) |
                        phy_encode(PORT_TYPE_10G, 1));
+        } else if ((np->flags & NIU_FLAGS_XCVR_SERDES) &&
+                   (parent->plat_type == PLAT_TYPE_NIU)) {
+                /* this is the Monza case */
+                if (np->flags & NIU_FLAGS_10G) {
+                        val = (phy_encode(PORT_TYPE_10G, 0) |
+                               phy_encode(PORT_TYPE_10G, 1));
+                } else {
+                        val = (phy_encode(PORT_TYPE_1G, 0) |
+                               phy_encode(PORT_TYPE_1G, 1));
+                }
         } else {
                 err = fill_phy_probe_info(np, parent, info);
                 if (err)
@@ -8656,7 +8928,9 @@ static void __devinit niu_device_announce(struct niu *np)
                                 dev->name,
                                 (np->flags & NIU_FLAGS_XMAC ? "XMAC" : "BMAC"),
                                 (np->flags & NIU_FLAGS_10G ? "10G" : "1G"),
-                                (np->flags & NIU_FLAGS_FIBER ? "FIBER" : "COPPER"),
+                                (np->flags & NIU_FLAGS_FIBER ? "FIBER" :
+                                 (np->flags & NIU_FLAGS_XCVR_SERDES ? "SERDES" :
+                                  "COPPER")),
                                 (np->mac_xcvr == MAC_XCVR_MII ? "MII" :
                                  (np->mac_xcvr == MAC_XCVR_PCS ? "PCS" : "XPCS")),
                                 np->vpd.phy_type);
diff --git a/drivers/net/niu.h b/drivers/net/niu.h
index c6fa883daa22..180ca8ae93de 100644
--- a/drivers/net/niu.h
+++ b/drivers/net/niu.h
@@ -1048,6 +1048,13 @@
 #define  PLL_CFG_LD_SHIFT               8
 #define  PLL_CFG_MPY                    0x0000001e
 #define  PLL_CFG_MPY_SHIFT              1
+#define  PLL_CFG_MPY_4X         0x0
+#define  PLL_CFG_MPY_5X         0x00000002
+#define  PLL_CFG_MPY_6X         0x00000004
+#define  PLL_CFG_MPY_8X         0x00000008
+#define  PLL_CFG_MPY_10X                0x0000000a
+#define  PLL_CFG_MPY_12X                0x0000000c
+#define  PLL_CFG_MPY_12P5X              0x0000000e
 #define  PLL_CFG_ENPLL                  0x00000001
 
 #define ESR2_TI_PLL_STS_L               (ESR2_BASE + 0x002)
@@ -1093,6 +1100,9 @@
 #define  PLL_TX_CFG_INVPAIR             0x00000080
 #define  PLL_TX_CFG_RATE                0x00000060
 #define  PLL_TX_CFG_RATE_SHIFT          5
+#define  PLL_TX_CFG_RATE_FULL           0x0
+#define  PLL_TX_CFG_RATE_HALF           0x20
+#define  PLL_TX_CFG_RATE_QUAD           0x40
 #define  PLL_TX_CFG_BUSWIDTH            0x0000001c
 #define  PLL_TX_CFG_BUSWIDTH_SHIFT      2
 #define  PLL_TX_CFG_ENTEST              0x00000002
@@ -1132,6 +1142,9 @@
 #define  PLL_RX_CFG_INVPAIR             0x00000080
 #define  PLL_RX_CFG_RATE                0x00000060
 #define  PLL_RX_CFG_RATE_SHIFT          5
+#define  PLL_RX_CFG_RATE_FULL           0x0
+#define  PLL_RX_CFG_RATE_HALF           0x20
+#define  PLL_RX_CFG_RATE_QUAD           0x40
 #define  PLL_RX_CFG_BUSWIDTH            0x0000001c
 #define  PLL_RX_CFG_BUSWIDTH_SHIFT      2
 #define  PLL_RX_CFG_ENTEST              0x00000002