2 files changed, 223 insertions, 116 deletions

diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c
index 0111206327ca..80737c131ce7 100644
--- a/drivers/serial/sh-sci.c
+++ b/drivers/serial/sh-sci.c
@@ -42,6 +42,7 @@
 #include <linux/delay.h>
 #include <linux/console.h>
 #include <linux/bitops.h>
+#include <linux/generic_serial.h>
 
 #ifdef CONFIG_CPU_FREQ
 #include <linux/notifier.h>
@@ -53,7 +54,9 @@
 #include <asm/irq.h>
 #include <asm/uaccess.h>
 
-#include <linux/generic_serial.h>
+#if defined(CONFIG_SUPERH) && !defined(CONFIG_SUPERH64)
+#include <asm/clock.h>
+#endif
 
 #ifdef CONFIG_SH_STANDARD_BIOS
 #include <asm/sh_bios.h>
@@ -86,9 +89,11 @@ static void sci_stop_rx(struct uart_port *port);
 static int sci_request_irq(struct sci_port *port);
 static void sci_free_irq(struct sci_port *port);
 
-static struct sci_port sci_ports[SCI_NPORTS];
+static struct sci_port sci_ports[];
 static struct uart_driver sci_uart_driver;
 
+#define SCI_NPORTS sci_uart_driver.nr
+
 #if defined(CONFIG_SH_STANDARD_BIOS) || defined(CONFIG_SH_KGDB)
 
 static void handle_error(struct uart_port *port)
@@ -168,7 +173,7 @@ static void put_string(struct sci_port *sci_port, const char *buffer, int count)
         int usegdb=0;
 
 #ifdef CONFIG_SH_STANDARD_BIOS
-        /* This call only does a trap the first time it is
+        /* This call only does a trap the first time it is
          * called, and so is safe to do here unconditionally
          */
         usegdb |= sh_bios_in_gdb_mode();
@@ -324,47 +329,46 @@ static void sci_init_pins_sci(struct uart_port* port, unsigned int cflag)
         /* tx mark output*/
         H8300_SCI_DR(ch) |= h8300_sci_pins[ch].tx;
 }
-#else
-static void sci_init_pins_sci(struct uart_port *port, unsigned int cflag)
-{
-}
 #endif
 #endif
 
 #if defined(SCIF_ONLY) || defined(SCI_AND_SCIF)
-#if defined(CONFIG_CPU_SH3)
-/* For SH7705, SH7707, SH7709, SH7709A, SH7729, SH7300*/
+#if defined(CONFIG_CPU_SUBTYPE_SH7300)
+/* SH7300 doesn't use RTS/CTS */
+static void sci_init_pins_scif(struct uart_port *port, unsigned int cflag)
+{
+        sci_out(port, SCFCR, 0);
+}
+#elif defined(CONFIG_CPU_SH3)
+/* For SH7705, SH7707, SH7709, SH7709A, SH7729 */
 static void sci_init_pins_scif(struct uart_port *port, unsigned int cflag)
 {
         unsigned int fcr_val = 0;
-#if !defined(CONFIG_CPU_SUBTYPE_SH7300) /* SH7300 doesn't use RTS/CTS */
-        {
-                unsigned short data;
+        unsigned short data;
+
+        /* We need to set SCPCR to enable RTS/CTS */
+        data = ctrl_inw(SCPCR);
+        /* Clear out SCP7MD1,0, SCP6MD1,0, SCP4MD1,0*/
+        ctrl_outw(data & 0x0fcf, SCPCR);
 
-                /* We need to set SCPCR to enable RTS/CTS */
-                data = ctrl_inw(SCPCR);
-                /* Clear out SCP7MD1,0, SCP6MD1,0, SCP4MD1,0*/
-                ctrl_outw(data&0x0fcf, SCPCR);
-        }
         if (cflag & CRTSCTS)
                 fcr_val |= SCFCR_MCE;
         else {
-                unsigned short data;
-
                 /* We need to set SCPCR to enable RTS/CTS */
                 data = ctrl_inw(SCPCR);
                 /* Clear out SCP7MD1,0, SCP4MD1,0,
                    Set SCP6MD1,0 = {01} (output)  */
-                ctrl_outw((data&0x0fcf)|0x1000, SCPCR);
+                ctrl_outw((data & 0x0fcf) | 0x1000, SCPCR);
 
                 data = ctrl_inb(SCPDR);
                 /* Set /RTS2 (bit6) = 0 */
-                ctrl_outb(data&0xbf, SCPDR);
+                ctrl_outb(data & 0xbf, SCPDR);
         }
-#endif
+
         sci_out(port, SCFCR, fcr_val);
 }
 
+#if defined(CONFIG_CPU_SUBTYPE_SH7707) || defined(CONFIG_CPU_SUBTYPE_SH7709)
 static void sci_init_pins_irda(struct uart_port *port, unsigned int cflag)
 {
         unsigned int fcr_val = 0;
@@ -374,7 +378,7 @@ static void sci_init_pins_irda(struct uart_port *port, unsigned int cflag)
 
         sci_out(port, SCFCR, fcr_val);
 }
-
+#endif
 #else
 
 /* For SH7750 */
@@ -385,7 +389,11 @@ static void sci_init_pins_scif(struct uart_port *port, unsigned int cflag)
         if (cflag & CRTSCTS) {
                 fcr_val |= SCFCR_MCE;
         } else {
+#ifdef CONFIG_CPU_SUBTYPE_SH7780
+                ctrl_outw(0x0080, SCSPTR0); /* Set RTS = 1 */
+#else
                 ctrl_outw(0x0080, SCSPTR2); /* Set RTS = 1 */
+#endif
         }
         sci_out(port, SCFCR, fcr_val);
 }
@@ -422,7 +430,11 @@ static void sci_transmit_chars(struct uart_port *port)
 
 #if !defined(SCI_ONLY)
         if (port->type == PORT_SCIF) {
+#if defined(CONFIG_CPU_SUBTYPE_SH7760) || defined(CONFIG_CPU_SUBTYPE_SH7780)
+                txroom = SCIF_TXROOM_MAX - (sci_in(port, SCTFDR) & 0x7f);
+#else
                 txroom = SCIF_TXROOM_MAX - (sci_in(port, SCFDR)>>8);
+#endif
         } else {
                 txroom = (sci_in(port, SCxSR) & SCI_TDRE)?1:0;
         }
@@ -491,7 +503,11 @@ static inline void sci_receive_chars(struct uart_port *port,
         while (1) {
 #if !defined(SCI_ONLY)
                 if (port->type == PORT_SCIF) {
+#if defined(CONFIG_CPU_SUBTYPE_SH7760) || defined(CONFIG_CPU_SUBTYPE_SH7780)
+                        count = sci_in(port, SCRFDR) & 0x7f;
+#else
                         count = sci_in(port, SCFDR)&SCIF_RFDC_MASK ;
+#endif
                 } else {
                         count = (sci_in(port, SCxSR)&SCxSR_RDxF(port))?1:0;
                 }
@@ -652,7 +668,7 @@ static inline int sci_handle_breaks(struct uart_port *port)
         struct tty_struct *tty = port->info->tty;
         struct sci_port *s = &sci_ports[port->line];
 
-        if (!s->break_flag && status & SCxSR_BRK(port))
+        if (!s->break_flag && status & SCxSR_BRK(port)) {
 #if defined(CONFIG_CPU_SH3)
                 /* Debounce break */
                 s->break_flag = 1;
@@ -783,6 +799,7 @@ static int sci_notifier(struct notifier_block *self, unsigned long phase, void *
             (phase == CPUFREQ_RESUMECHANGE)){
                 for (i = 0; i < SCI_NPORTS; i++) {
                         struct uart_port *port = &sci_ports[i].port;
+                        struct clk *clk;
 
                         /*
                          * Update the uartclk per-port if frequency has
@@ -795,7 +812,9 @@ static int sci_notifier(struct notifier_block *self, unsigned long phase, void *
                          *
                          * Clean this up later..
                          */
-                        port->uartclk = current_cpu_data.module_clock * 16;
+                        clk = clk_get("module_clk");
+                        port->uartclk = clk_get_rate(clk) * 16;
+                        clk_put(clk);
                 }
 
                 printk("%s: got a postchange notification for cpu %d (old %d, new %d)\n",
@@ -1008,15 +1027,20 @@ static void sci_set_termios(struct uart_port *port, struct termios *termios,
         sci_out(port, SCSMR, smr_val);
 
         switch (baud) {
-                case 0:         t = -1;         break;
-                case 2400:      t = BPS_2400;   break;
-                case 4800:      t = BPS_4800;   break;
-                case 9600:      t = BPS_9600;   break;
-                case 19200:     t = BPS_19200;  break;
-                case 38400:     t = BPS_38400;  break;
-                case 57600:     t = BPS_57600;  break;
-                case 115200:    t = BPS_115200; break;
-                default:        t = SCBRR_VALUE(baud); break;
+                case 0:
+                        t = -1;
+                        break;
+                default:
+                {
+#if defined(CONFIG_SUPERH) && !defined(CONFIG_SUPERH64)
+                        struct clk *clk = clk_get("module_clk");
+                        t = SCBRR_VALUE(baud, clk_get_rate(clk));
+                        clk_put(clk);
+#else
+                        t = SCBRR_VALUE(baud);
+#endif
+                }
+                        break;
         }
 
         if (t > 0) {
@@ -1030,7 +1054,9 @@ static void sci_set_termios(struct uart_port *port, struct termios *termios,
                 udelay((1000000+(baud-1)) / baud); /* Wait one bit interval */
         }
 
-        s->init_pins(port, termios->c_cflag);
+        if (likely(s->init_pins))
+                s->init_pins(port, termios->c_cflag);
+
         sci_out(port, SCSCR, SCSCR_INIT(port));
 
         if ((termios->c_cflag & CREAD) != 0)
@@ -1107,7 +1133,7 @@ static struct uart_ops sci_uart_ops = {
         .verify_port    = sci_verify_port,
 };
 
-static struct sci_port sci_ports[SCI_NPORTS] = {
+static struct sci_port sci_ports[] = {
 #if defined(CONFIG_CPU_SUBTYPE_SH7708)
         {
                 .port   = {
@@ -1121,7 +1147,6 @@ static struct sci_port sci_ports[SCI_NPORTS] = {
                 },
                 .type           = PORT_SCI,
                 .irqs           = SCI_IRQS,
-                .init_pins      = sci_init_pins_sci,
         },
 #elif defined(CONFIG_CPU_SUBTYPE_SH7705)
         {
@@ -1165,7 +1190,6 @@ static struct sci_port sci_ports[SCI_NPORTS] = {
                 },
                 .type           = PORT_SCI,
                 .irqs           = SCI_IRQS,
-                .init_pins      = sci_init_pins_sci,
         },
         {
                 .port   = {
@@ -1225,7 +1249,7 @@ static struct sci_port sci_ports[SCI_NPORTS] = {
                 .irqs           = SH73180_SCIF_IRQS,
                 .init_pins      = sci_init_pins_scif,
         },
-#elif defined(CONFIG_SH_RTS7751R2D)
+#elif defined(CONFIG_CPU_SUBTYPE_SH4_202)
         {
                 .port   = {
                         .membase        = (void *)0xffe80000,
@@ -1253,7 +1277,6 @@ static struct sci_port sci_ports[SCI_NPORTS] = {
                 },
                 .type           = PORT_SCI,
                 .irqs           = SCI_IRQS,
-                .init_pins      = sci_init_pins_sci,
         },
         {
                 .port   = {
@@ -1312,21 +1335,6 @@ static struct sci_port sci_ports[SCI_NPORTS] = {
                 .irqs           = SH7760_SCIF2_IRQS,
                 .init_pins      = sci_init_pins_scif,
         },
-#elif defined(CONFIG_CPU_SUBTYPE_SH4_202)
-        {
-                .port   = {
-                        .membase        = (void *)0xffe80000,
-                        .mapbase        = 0xffe80000,
-                        .iotype         = UPIO_MEM,
-                        .irq            = 43,
-                        .ops            = &sci_uart_ops,
-                        .flags          = UPF_BOOT_AUTOCONF,
-                        .line           = 0,
-                },
-                .type           = PORT_SCIF,
-                .irqs           = SH4_SCIF_IRQS,
-                .init_pins      = sci_init_pins_scif,
-        },
 #elif defined(CONFIG_CPU_SUBTYPE_ST40STB1)
         {
                 .port   = {
@@ -1455,6 +1463,78 @@ static struct sci_port sci_ports[SCI_NPORTS] = {
                 .irqs           = H8S_SCI_IRQS2,
                 .init_pins      = sci_init_pins_sci,
         },
+#elif defined(CONFIG_CPU_SUBTYPE_SH7770)
+        {
+                .port   = {
+                        .membase        = (void *)0xff923000,
+                        .mapbase        = 0xff923000,
+                        .iotype         = SERIAL_IO_MEM,
+                        .irq            = 61,
+                        .ops            = &sci_uart_ops,
+                        .flags          = ASYNC_BOOT_AUTOCONF,
+                        .line           = 0,
+                },
+                .type           = PORT_SCIF,
+                .irqs           = SH7770_SCIF0_IRQS,
+                .init_pins      = sci_init_pins_scif,
+        },
+        {
+                .port   = {
+                        .membase        = (void *)0xff924000,
+                        .mapbase        = 0xff924000,
+                        .iotype         = SERIAL_IO_MEM,
+                        .irq            = 62,
+                        .ops            = &sci_uart_ops,
+                        .flags          = ASYNC_BOOT_AUTOCONF,
+                        .line           = 1,
+                },
+                .type           = PORT_SCIF,
+                .irqs           = SH7770_SCIF1_IRQS,
+                .init_pins      = sci_init_pins_scif,
+        },
+        {
+                .port   = {
+                        .membase        = (void *)0xff925000,
+                        .mapbase        = 0xff925000,
+                        .iotype         = SERIAL_IO_MEM,
+                        .irq            = 63,
+                        .ops            = &sci_uart_ops,
+                        .flags          = ASYNC_BOOT_AUTOCONF,
+                        .line           = 2,
+                },
+                .type           = PORT_SCIF,
+                .irqs           = SH7770_SCIF2_IRQS,
+                .init_pins      = sci_init_pins_scif,
+        },
+#elif defined(CONFIG_CPU_SUBTYPE_SH7780)
+        {
+                .port   = {
+                        .membase        = (void *)0xffe00000,
+                        .mapbase        = 0xffe00000,
+                        .iotype         = SERIAL_IO_MEM,
+                        .irq            = 43,
+                        .ops            = &sci_uart_ops,
+                        .flags          = ASYNC_BOOT_AUTOCONF,
+                        .line           = 0,
+                },
+                .type           = PORT_SCIF,
+                .irqs           = SH7780_SCIF0_IRQS,
+                .init_pins      = sci_init_pins_scif,
+        },
+        {
+                .port   = {
+                        .membase        = (void *)0xffe10000,
+                        .mapbase        = 0xffe10000,
+                        .iotype         = SERIAL_IO_MEM,
+                        .irq            = 79,
+                        .ops            = &sci_uart_ops,
+                        .flags          = ASYNC_BOOT_AUTOCONF,
+                        .line           = 1,
+                },
+                .type           = PORT_SCIF,
+                .irqs           = SH7780_SCIF1_IRQS,
+                .init_pins      = sci_init_pins_scif,
+        },
 #else
 #error "CPU subtype not defined"
 #endif
@@ -1480,9 +1560,6 @@ static int __init serial_console_setup(struct console *co, char *options)
         int flow = 'n';
         int ret;
 
-        if (co->index >= SCI_NPORTS)
-                co->index = 0;
-
         serial_console_port = &sci_ports[co->index];
         port = &serial_console_port->port;
         port->type = serial_console_port->type;
@@ -1496,14 +1573,21 @@ static int __init serial_console_setup(struct console *co, char *options)
          * We need to set the initial uartclk here, since otherwise it will
          * only ever be setup at sci_init() time.
          */
-#if !defined(__H8300H__) && !defined(__H8300S__)
-        port->uartclk = current_cpu_data.module_clock * 16;
-#else
+#if defined(__H8300H__) || defined(__H8300S__)
         port->uartclk = CONFIG_CPU_CLOCK;
-#endif
+
 #if defined(__H8300S__)
         h8300_sci_enable(port, sci_enable);
 #endif
+#elif defined(CONFIG_SUPERH64)
+        port->uartclk = current_cpu_info.module_clock * 16;
+#else
+        {
+                struct clk *clk = clk_get("module_clk");
+                port->uartclk = clk_get_rate(clk) * 16;
+                clk_put(clk);
+        }
+#endif
         if (options)
                 uart_parse_options(options, &baud, &parity, &bits, &flow);
 
@@ -1566,7 +1650,7 @@ int __init kgdb_console_setup(struct console *co, char *options)
         int parity = 'n';
         int flow = 'n';
 
-        if (co->index >= SCI_NPORTS || co->index != kgdb_portnum)
+        if (co->index != kgdb_portnum)
                 co->index = kgdb_portnum;
 
         if (options)
@@ -1606,7 +1690,7 @@ console_initcall(kgdb_console_init);
 #elif defined(CONFIG_SERIAL_SH_SCI_CONSOLE)
 #define SCI_CONSOLE     &serial_console
 #else
-#define SCI_CONSOLE     0
+#define SCI_CONSOLE     0
 #endif
 
 static char banner[] __initdata =
@@ -1621,7 +1705,6 @@ static struct uart_driver sci_uart_driver = {
         .dev_name       = "ttySC",
         .major          = SCI_MAJOR,
         .minor          = SCI_MINOR_START,
-        .nr             = SCI_NPORTS,
         .cons           = SCI_CONSOLE,
 };
 
@@ -1631,15 +1714,21 @@ static int __init sci_init(void)
 
         printk("%s", banner);
 
+        sci_uart_driver.nr = ARRAY_SIZE(sci_ports);
+
         ret = uart_register_driver(&sci_uart_driver);
         if (ret == 0) {
                 for (chan = 0; chan < SCI_NPORTS; chan++) {
                         struct sci_port *sciport = &sci_ports[chan];
 
-#if !defined(__H8300H__) && !defined(__H8300S__)
-                        sciport->port.uartclk = (current_cpu_data.module_clock * 16);
-#else
+#if defined(__H8300H__) || defined(__H8300S__)
                         sciport->port.uartclk = CONFIG_CPU_CLOCK;
+#elif defined(CONFIG_SUPERH64)
+                        sciport->port.uartclk = current_cpu_info.module_clock * 16;
+#else
+                        struct clk *clk = clk_get("module_clk");
+                        sciport->port.uartclk = clk_get_rate(clk) * 16;
+                        clk_put(clk);
 #endif
                         uart_add_one_port(&sci_uart_driver, &sciport->port);
                         sciport->break_timer.data = (unsigned long)sciport;
diff --git a/drivers/serial/sh-sci.h b/drivers/serial/sh-sci.h
index 2892169eff05..1f14bb4382f6 100644
--- a/drivers/serial/sh-sci.h
+++ b/drivers/serial/sh-sci.h
@@ -46,14 +46,17 @@
 #define H8S_SCI_IRQS1 {92, 93, 94,   0 }
 #define H8S_SCI_IRQS2 {96, 97, 98,   0 }
 #define SH5_SCIF_IRQS {39, 40, 42,   0 }
+#define SH7770_SCIF0_IRQS {61, 61, 61, 61 }
+#define SH7770_SCIF1_IRQS {62, 62, 62, 62 }
+#define SH7770_SCIF2_IRQS {63, 63, 63, 63 }
+#define SH7780_SCIF0_IRQS {40, 41, 43, 42 }
+#define SH7780_SCIF1_IRQS {76, 77, 79, 78 }
 
 #if defined(CONFIG_CPU_SUBTYPE_SH7708)
-# define SCI_NPORTS 1
 # define SCSPTR 0xffffff7c /* 8 bit */
 # define SCSCR_INIT(port)          0x30 /* TIE=0,RIE=0,TE=1,RE=1 */
 # define SCI_ONLY
 #elif defined(CONFIG_CPU_SUBTYPE_SH7707) || defined(CONFIG_CPU_SUBTYPE_SH7709)
-# define SCI_NPORTS 3
 # define SCPCR  0xA4000116 /* 16 bit SCI and SCIF */
 # define SCPDR  0xA4000136 /* 8  bit SCI and SCIF */
 # define SCSCR_INIT(port)          0x30 /* TIE=0,RIE=0,TE=1,RE=1 */
@@ -61,9 +64,8 @@
 #elif defined(CONFIG_CPU_SUBTYPE_SH7705)
 # define SCIF0          0xA4400000
 # define SCIF2          0xA4410000
-# define SCSMR_Ir       0xA44A0000
-# define IRDA_SCIF      SCIF0
-# define SCI_NPORTS 2
+# define SCSMR_Ir       0xA44A0000
+# define IRDA_SCIF      SCIF0
 # define SCPCR 0xA4000116
 # define SCPDR 0xA4000136
 
@@ -74,14 +76,11 @@
 # define SCSCR_INIT(port) (port->mapbase == SCIF2) ? 0xF3 : 0xF0
 # define SCIF_ONLY
 #elif defined(CONFIG_SH_RTS7751R2D)
-# define SCI_NPORTS 1
-# define SCSPTR1 0xffe0001c /* 8  bit SCI */
 # define SCSPTR2 0xFFE80020 /* 16 bit SCIF */
 # define SCIF_ORER 0x0001   /* overrun error bit */
 # define SCSCR_INIT(port) 0x3a /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
 # define SCIF_ONLY
 #elif defined(CONFIG_CPU_SUBTYPE_SH7750) || defined(CONFIG_CPU_SUBTYPE_SH7751)
-# define SCI_NPORTS 2
 # define SCSPTR1 0xffe0001c /* 8  bit SCI */
 # define SCSPTR2 0xFFE80020 /* 16 bit SCIF */
 # define SCIF_ORER 0x0001   /* overrun error bit */
@@ -90,34 +89,29 @@
         0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ )
 # define SCI_AND_SCIF
 #elif defined(CONFIG_CPU_SUBTYPE_SH7760)
-# define SCI_NPORTS 3
-# define SCSPTR0 0xfe600000 /* 16 bit SCIF */
-# define SCSPTR1 0xfe610000 /* 16 bit SCIF */
-# define SCSPTR2 0xfe620000 /* 16 bit SCIF */
+# define SCSPTR0 0xfe600024 /* 16 bit SCIF */
+# define SCSPTR1 0xfe610024 /* 16 bit SCIF */
+# define SCSPTR2 0xfe620024 /* 16 bit SCIF */
 # define SCIF_ORER 0x0001  /* overrun error bit */
 # define SCSCR_INIT(port)          0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
 # define SCIF_ONLY
 #elif defined(CONFIG_CPU_SUBTYPE_SH7300)
-# define SCI_NPORTS 1
 # define SCPCR  0xA4050116        /* 16 bit SCIF */
 # define SCPDR  0xA4050136        /* 16 bit SCIF */
 # define SCSCR_INIT(port)  0x0030 /* TIE=0,RIE=0,TE=1,RE=1 */
 # define SCIF_ONLY
 #elif defined(CONFIG_CPU_SUBTYPE_SH73180)
-# define SCI_NPORTS 1
 # define SCPDR  0xA4050138        /* 16 bit SCIF */
 # define SCSPTR2 SCPDR
 # define SCIF_ORER 0x0001   /* overrun error bit */
 # define SCSCR_INIT(port)  0x0038 /* TIE=0,RIE=0,TE=1,RE=1 */
 # define SCIF_ONLY
 #elif defined(CONFIG_CPU_SUBTYPE_SH4_202)
-# define SCI_NPORTS 1
 # define SCSPTR2 0xffe80020 /* 16 bit SCIF */
 # define SCIF_ORER 0x0001   /* overrun error bit */
 # define SCSCR_INIT(port) 0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
 # define SCIF_ONLY
 #elif defined(CONFIG_CPU_SUBTYPE_ST40STB1)
-# define SCI_NPORTS 2
 # define SCSPTR1 0xffe00020 /* 16 bit SCIF */
 # define SCSPTR2 0xffe80020 /* 16 bit SCIF */
 # define SCIF_ORER 0x0001   /* overrun error bit */
@@ -129,26 +123,32 @@
 # define SCIF_ADDR_SH5     PHYS_PERIPHERAL_BLOCK+SCIF_BASE_ADDR
 # define SCIF_PTR2_OFFS    0x0000020
 # define SCIF_LSR2_OFFS    0x0000024
-# define SCI_NPORTS 1
-# define SCI_INIT { \
-  { {}, PORT_SCIF, 0, \
-     SH5_SCIF_IRQS, sci_init_pins_scif }  \
-}
 # define SCSPTR2           ((port->mapbase)+SCIF_PTR2_OFFS) /* 16 bit SCIF */
 # define SCLSR2            ((port->mapbase)+SCIF_LSR2_OFFS) /* 16 bit SCIF */
 # define SCSCR_INIT(port)  0x38                           /* TIE=0,RIE=0,
                                                              TE=1,RE=1,REIE=1 */
 # define SCIF_ONLY
 #elif defined(CONFIG_H83007) || defined(CONFIG_H83068)
-# define SCI_NPORTS 3
 # define SCSCR_INIT(port)          0x30 /* TIE=0,RIE=0,TE=1,RE=1 */
 # define SCI_ONLY
 # define H8300_SCI_DR(ch) *(volatile char *)(P1DR + h8300_sci_pins[ch].port)
 #elif defined(CONFIG_H8S2678)
-# define SCI_NPORTS 3
 # define SCSCR_INIT(port)          0x30 /* TIE=0,RIE=0,TE=1,RE=1 */
 # define SCI_ONLY
 # define H8300_SCI_DR(ch) *(volatile char *)(P1DR + h8300_sci_pins[ch].port)
+#elif defined(CONFIG_CPU_SUBTYPE_SH7770)
+# define SCSPTR0 0xff923020 /* 16 bit SCIF */
+# define SCSPTR1 0xff924020 /* 16 bit SCIF */
+# define SCSPTR2 0xff925020 /* 16 bit SCIF */
+# define SCIF_ORER 0x0001  /* overrun error bit */
+# define SCSCR_INIT(port)       0x3c /* TIE=0,RIE=0,TE=1,RE=1,REIE=1,cke=2 */
+# define SCIF_ONLY
+#elif defined(CONFIG_CPU_SUBTYPE_SH7780)
+# define SCSPTR0        0xffe00024      /* 16 bit SCIF */
+# define SCSPTR1        0xffe10024      /* 16 bit SCIF */
+# define SCIF_OPER      0x0001          /* Overrun error bit */
+# define SCSCR_INIT(port)       0x3a    /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
+# define SCIF_ONLY
 #else
 # error CPU subtype not defined
 #endif
@@ -158,7 +158,7 @@
 #define SCI_CTRL_FLAGS_RIE  0x40 /* all */
 #define SCI_CTRL_FLAGS_TE   0x20 /* all */
 #define SCI_CTRL_FLAGS_RE   0x10 /* all */
-#if defined(CONFIG_CPU_SUBTYPE_SH7750) || defined(CONFIG_CPU_SUBTYPE_SH7751)
+#if defined(CONFIG_CPU_SUBTYPE_SH7750) || defined(CONFIG_CPU_SUBTYPE_SH7751) || defined(CONFIG_CPU_SUBTYPE_SH7780)
 #define SCI_CTRL_FLAGS_REIE 0x08 /* 7750 SCIF */
 #else
 #define SCI_CTRL_FLAGS_REIE 0
@@ -213,7 +213,7 @@
 # define SCxSR_RDxF_CLEAR(port)         0xbc
 # define SCxSR_ERROR_CLEAR(port)        0xc4
 # define SCxSR_TDxE_CLEAR(port)         0x78
-# define SCxSR_BREAK_CLEAR(port)        0xc4
+# define SCxSR_BREAK_CLEAR(port)        0xc4
 #elif defined(SCIF_ONLY)
 # define SCxSR_TEND(port)               SCIF_TEND
 # define SCxSR_ERRORS(port)             SCIF_ERRORS
@@ -237,7 +237,7 @@
 # define SCxSR_RDxF_CLEAR(port)         0x00fc
 # define SCxSR_ERROR_CLEAR(port)        0x0073
 # define SCxSR_TDxE_CLEAR(port)         0x00df
-# define SCxSR_BREAK_CLEAR(port)        0x00e3
+# define SCxSR_BREAK_CLEAR(port)        0x00e3
 #endif
 #else
 # define SCxSR_TEND(port)        (((port)->type == PORT_SCI) ? SCI_TEND   : SCIF_TEND)
@@ -285,14 +285,14 @@ struct sci_port {
 
 #define SCI_IN(size, offset)                                    \
   unsigned int addr = port->mapbase + (offset);                 \
-  if ((size) == 8) {                                            \
+  if ((size) == 8) {                                            \
     return ctrl_inb(addr);                                      \
-  } else {                                                      \
+  } else {                                                      \
     return ctrl_inw(addr);                                      \
   }
 #define SCI_OUT(size, offset, value)                            \
   unsigned int addr = port->mapbase + (offset);                 \
-  if ((size) == 8) {                                            \
+  if ((size) == 8) {                                            \
     ctrl_outb(value, addr);                                     \
   } else {                                                      \
     ctrl_outw(value, addr);                                     \
@@ -301,10 +301,10 @@ struct sci_port {
 #define CPU_SCIx_FNS(name, sci_offset, sci_size, scif_offset, scif_size)\
   static inline unsigned int sci_##name##_in(struct uart_port *port)    \
   {                                                                     \
-    if (port->type == PORT_SCI) {                                       \
+    if (port->type == PORT_SCI) {                                       \
       SCI_IN(sci_size, sci_offset)                                      \
     } else {                                                            \
-      SCI_IN(scif_size, scif_offset);                                   \
+      SCI_IN(scif_size, scif_offset);                                   \
     }                                                                   \
   }                                                                     \
   static inline void sci_##name##_out(struct uart_port *port, unsigned int value) \
@@ -319,7 +319,7 @@ struct sci_port {
 #define CPU_SCIF_FNS(name, scif_offset, scif_size)                              \
   static inline unsigned int sci_##name##_in(struct uart_port *port)    \
   {                                                                     \
-    SCI_IN(scif_size, scif_offset);                                     \
+    SCI_IN(scif_size, scif_offset);                                     \
   }                                                                     \
   static inline void sci_##name##_out(struct uart_port *port, unsigned int value) \
   {                                                                     \
@@ -329,7 +329,7 @@ struct sci_port {
 #define CPU_SCI_FNS(name, sci_offset, sci_size)                         \
   static inline unsigned int sci_##name##_in(struct uart_port* port)    \
   {                                                                     \
-    SCI_IN(sci_size, sci_offset);                                       \
+    SCI_IN(sci_size, sci_offset);                                       \
   }                                                                     \
   static inline void sci_##name##_out(struct uart_port* port, unsigned int value) \
   {                                                                     \
@@ -385,10 +385,17 @@ SCIx_FNS(SCxTDR, 0x06,  8, 0x0c,  8, 0x06,  8, 0x0C,  8, 0x03,  8)
 SCIx_FNS(SCxSR,  0x08,  8, 0x10,  8, 0x08, 16, 0x10, 16, 0x04,  8)
 SCIx_FNS(SCxRDR, 0x0a,  8, 0x14,  8, 0x0A,  8, 0x14,  8, 0x05,  8)
 SCIF_FNS(SCFCR,                      0x0c,  8, 0x18, 16)
+#if defined(CONFIG_CPU_SUBTYPE_SH7760) || defined(CONFIG_CPU_SUBTYPE_SH7780)
+SCIF_FNS(SCTFDR,                     0x0e, 16, 0x1C, 16)
+SCIF_FNS(SCRFDR,                     0x0e, 16, 0x20, 16)
+SCIF_FNS(SCSPTR,                        0,  0, 0x24, 16)
+SCIF_FNS(SCLSR,                         0,  0, 0x28, 16)
+#else
 SCIF_FNS(SCFDR,                      0x0e, 16, 0x1C, 16)
 SCIF_FNS(SCSPTR,                        0,  0, 0x20, 16)
 SCIF_FNS(SCLSR,                         0,  0, 0x24, 16)
 #endif
+#endif
 #define sci_in(port, reg) sci_##reg##_in(port)
 #define sci_out(port, reg, value) sci_##reg##_out(port, value)
 
@@ -518,6 +525,24 @@ static inline int sci_rxd_in(struct uart_port *port)
         int ch = (port->mapbase - SMR0) >> 3;
         return (H8300_SCI_DR(ch) & h8300_sci_pins[ch].rx) ? 1 : 0;
 }
+#elif defined(CONFIG_CPU_SUBTYPE_SH7770)
+static inline int sci_rxd_in(struct uart_port *port)
+{
+        if (port->mapbase == 0xff923000)
+                return ctrl_inw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */
+        if (port->mapbase == 0xff924000)
+                return ctrl_inw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */
+        if (port->mapbase == 0xff925000)
+                return ctrl_inw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */
+}
+#elif defined(CONFIG_CPU_SUBTYPE_SH7780)
+static inline int sci_rxd_in(struct uart_port *port)
+{
+        if (port->mapbase == 0xffe00000)
+                return ctrl_inw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */
+        if (port->mapbase == 0xffe10000)
+                return ctrl_inw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */
+}
 #endif
 
 /*
@@ -552,22 +577,15 @@ static inline int sci_rxd_in(struct uart_port *port)
  * -- Mitch Davis - 15 Jul 2000
  */
 
-#define PCLK           (current_cpu_data.module_clock)
-
-#if defined(CONFIG_CPU_SUBTYPE_SH7300)
-#define SCBRR_VALUE(bps) ((PCLK+16*bps)/(16*bps)-1)
+#if defined(CONFIG_CPU_SUBTYPE_SH7300) || defined(CONFIG_CPU_SUBTYPE_SH7780)
+#define SCBRR_VALUE(bps, clk) ((clk+16*bps)/(16*bps)-1)
 #elif defined(CONFIG_CPU_SUBTYPE_SH7705)
-#define SCBRR_VALUE(bps) (((PCLK*2)+16*bps)/(32*bps)-1)
-#elif !defined(__H8300H__) && !defined(__H8300S__)
-#define SCBRR_VALUE(bps) ((PCLK+16*bps)/(32*bps)-1)
-#else
+#define SCBRR_VALUE(bps, clk) (((clk*2)+16*bps)/(32*bps)-1)
+#elif defined(__H8300H__) || defined(__H8300S__)
 #define SCBRR_VALUE(bps) (((CONFIG_CPU_CLOCK*1000/32)/bps)-1)
+#elif defined(CONFIG_SUPERH64)
+#define SCBRR_VALUE(bps) ((current_cpu_data.module_clock+16*bps)/(32*bps)-1)
+#else /* Generic SH */
+#define SCBRR_VALUE(bps, clk) ((clk+16*bps)/(32*bps)-1)
 #endif
-#define BPS_2400       SCBRR_VALUE(2400)
-#define BPS_4800       SCBRR_VALUE(4800)
-#define BPS_9600       SCBRR_VALUE(9600)
-#define BPS_19200      SCBRR_VALUE(19200)
-#define BPS_38400      SCBRR_VALUE(38400)
-#define BPS_57600      SCBRR_VALUE(57600)
-#define BPS_115200     SCBRR_VALUE(115200)