1 files changed, 13 insertions, 42 deletions

diff --git a/drivers/scsi/sym53c8xx_2/sym_glue.c b/drivers/scsi/sym53c8xx_2/sym_glue.c
index ec9d93aa160d..e6ff89a8524c 100644
--- a/drivers/scsi/sym53c8xx_2/sym_glue.c
+++ b/drivers/scsi/sym53c8xx_2/sym_glue.c
@@ -134,45 +134,6 @@ static void sym2_setup_params(void)
         }
 }
 
-/*
- * We used to try to deal with 64-bit BARs here, but don't any more.
- * There are many parts of this driver which would need to be modified
- * to handle a 64-bit base address, including scripts.  I'm uncomfortable
- * with making those changes when I have no way of testing it, so I'm
- * just going to disable it.
- *
- * Note that some machines (eg HP rx8620 and Superdome) have bus addresses
- * below 4GB and physical addresses above 4GB.  These will continue to work.
- */
-static int __devinit
-pci_get_base_address(struct pci_dev *pdev, int index, unsigned long *basep)
-{
-        u32 tmp;
-        unsigned long base;
-#define PCI_BAR_OFFSET(index) (PCI_BASE_ADDRESS_0 + (index<<2))
-
-        pci_read_config_dword(pdev, PCI_BAR_OFFSET(index++), &tmp);
-        base = tmp;
-        if ((tmp & 0x7) == PCI_BASE_ADDRESS_MEM_TYPE_64) {
-                pci_read_config_dword(pdev, PCI_BAR_OFFSET(index++), &tmp);
-                if (tmp > 0) {
-                        dev_err(&pdev->dev,
-                                "BAR %d is 64-bit, disabling\n", index - 1);
-                        base = 0;
-                }
-        }
-
-        if ((base & PCI_BASE_ADDRESS_SPACE) == PCI_BASE_ADDRESS_SPACE_IO) {
-                base &= PCI_BASE_ADDRESS_IO_MASK;
-        } else {
-                base &= PCI_BASE_ADDRESS_MEM_MASK;
-        }
-
-        *basep = base;
-        return index;
-#undef PCI_BAR_OFFSET
-}
-
 static struct scsi_transport_template *sym2_transport_template = NULL;
 
 /*
@@ -1866,13 +1827,23 @@ static int __devinit sym_set_workarounds(struct sym_device *device)
 static void __devinit
 sym_init_device(struct pci_dev *pdev, struct sym_device *device)
 {
-        int i;
+        int i = 2;
+        struct pci_bus_region bus_addr;
 
         device->host_id = SYM_SETUP_HOST_ID;
         device->pdev = pdev;
 
-        i = pci_get_base_address(pdev, 1, &device->mmio_base);
-        pci_get_base_address(pdev, i, &device->ram_base);
+        pcibios_resource_to_bus(pdev, &bus_addr, &pdev->resource[1]);
+        device->mmio_base = bus_addr.start;
+
+        /*
+         * If the BAR is 64-bit, resource 2 will be occupied by the
+         * upper 32 bits
+         */
+        if (!pdev->resource[i].flags)
+                i++;
+        pcibios_resource_to_bus(pdev, &bus_addr, &pdev->resource[i]);
+        device->ram_base = bus_addr.start;
 
 #ifdef CONFIG_SCSI_SYM53C8XX_MMIO
         if (device->mmio_base)