6 files changed, 281 insertions, 233 deletions

diff --git a/drivers/scsi/Makefile b/drivers/scsi/Makefile
index e513c3158ad9..503f189dab3b 100644
--- a/drivers/scsi/Makefile
+++ b/drivers/scsi/Makefile
@@ -165,7 +165,7 @@ ncr53c8xx-flags-$(CONFIG_SCSI_ZALON) \
 CFLAGS_ncr53c8xx.o      := $(ncr53c8xx-flags-y) $(ncr53c8xx-flags-m)
 zalon7xx-objs   := zalon.o ncr53c8xx.o
 NCR_Q720_mod-objs       := NCR_Q720.o ncr53c8xx.o
-libata-objs     := libata-core.o libata-scsi.o libata-bmdma.o
+libata-objs     := libata-core.o libata-scsi.o libata-bmdma.o libata-eh.o
 oktagon_esp_mod-objs    := oktagon_esp.o oktagon_io.o
 
 # Files generated that shall be removed upon make clean
diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c
index 66b48b11fa0e..186a9ce4f072 100644
--- a/drivers/scsi/libata-core.c
+++ b/drivers/scsi/libata-core.c
@@ -4016,99 +4016,6 @@ err_out:
 }
 
 /**
- *      ata_qc_timeout - Handle timeout of queued command
- *      @qc: Command that timed out
- *
- *      Some part of the kernel (currently, only the SCSI layer)
- *      has noticed that the active command on port @ap has not
- *      completed after a specified length of time.  Handle this
- *      condition by disabling DMA (if necessary) and completing
- *      transactions, with error if necessary.
- *
- *      This also handles the case of the "lost interrupt", where
- *      for some reason (possibly hardware bug, possibly driver bug)
- *      an interrupt was not delivered to the driver, even though the
- *      transaction completed successfully.
- *
- *      LOCKING:
- *      Inherited from SCSI layer (none, can sleep)
- */
-
-static void ata_qc_timeout(struct ata_queued_cmd *qc)
-{
-        struct ata_port *ap = qc->ap;
-        struct ata_host_set *host_set = ap->host_set;
-        u8 host_stat = 0, drv_stat;
-        unsigned long flags;
-
-        DPRINTK("ENTER\n");
-
-        ap->hsm_task_state = HSM_ST_IDLE;
-
-        spin_lock_irqsave(&host_set->lock, flags);
-
-        switch (qc->tf.protocol) {
-
-        case ATA_PROT_DMA:
-        case ATA_PROT_ATAPI_DMA:
-                host_stat = ap->ops->bmdma_status(ap);
-
-                /* before we do anything else, clear DMA-Start bit */
-                ap->ops->bmdma_stop(qc);
-
-                /* fall through */
-
-        default:
-                ata_altstatus(ap);
-                drv_stat = ata_chk_status(ap);
-
-                /* ack bmdma irq events */
-                ap->ops->irq_clear(ap);
-
-                printk(KERN_ERR "ata%u: command 0x%x timeout, stat 0x%x host_stat 0x%x\n",
-                       ap->id, qc->tf.command, drv_stat, host_stat);
-
-                /* complete taskfile transaction */
-                qc->err_mask |= ac_err_mask(drv_stat);
-                break;
-        }
-
-        spin_unlock_irqrestore(&host_set->lock, flags);
-
-        ata_eh_qc_complete(qc);
-
-        DPRINTK("EXIT\n");
-}
-
-/**
- *      ata_eng_timeout - Handle timeout of queued command
- *      @ap: Port on which timed-out command is active
- *
- *      Some part of the kernel (currently, only the SCSI layer)
- *      has noticed that the active command on port @ap has not
- *      completed after a specified length of time.  Handle this
- *      condition by disabling DMA (if necessary) and completing
- *      transactions, with error if necessary.
- *
- *      This also handles the case of the "lost interrupt", where
- *      for some reason (possibly hardware bug, possibly driver bug)
- *      an interrupt was not delivered to the driver, even though the
- *      transaction completed successfully.
- *
- *      LOCKING:
- *      Inherited from SCSI layer (none, can sleep)
- */
-
-void ata_eng_timeout(struct ata_port *ap)
-{
-        DPRINTK("ENTER\n");
-
-        ata_qc_timeout(ata_qc_from_tag(ap, ap->active_tag));
-
-        DPRINTK("EXIT\n");
-}
-
-/**
  *      ata_qc_new - Request an available ATA command, for queueing
  *      @ap: Port associated with device @dev
  *      @dev: Device from whom we request an available command structure
@@ -5145,7 +5052,6 @@ EXPORT_SYMBOL_GPL(ata_sg_init);
 EXPORT_SYMBOL_GPL(ata_sg_init_one);
 EXPORT_SYMBOL_GPL(__ata_qc_complete);
 EXPORT_SYMBOL_GPL(ata_qc_issue_prot);
-EXPORT_SYMBOL_GPL(ata_eng_timeout);
 EXPORT_SYMBOL_GPL(ata_tf_load);
 EXPORT_SYMBOL_GPL(ata_tf_read);
 EXPORT_SYMBOL_GPL(ata_noop_dev_select);
@@ -5185,15 +5091,12 @@ EXPORT_SYMBOL_GPL(ata_busy_sleep);
 EXPORT_SYMBOL_GPL(ata_port_queue_task);
 EXPORT_SYMBOL_GPL(ata_scsi_ioctl);
 EXPORT_SYMBOL_GPL(ata_scsi_queuecmd);
-EXPORT_SYMBOL_GPL(ata_scsi_error);
 EXPORT_SYMBOL_GPL(ata_scsi_slave_config);
 EXPORT_SYMBOL_GPL(ata_scsi_release);
 EXPORT_SYMBOL_GPL(ata_host_intr);
 EXPORT_SYMBOL_GPL(ata_id_string);
 EXPORT_SYMBOL_GPL(ata_id_c_string);
 EXPORT_SYMBOL_GPL(ata_scsi_simulate);
-EXPORT_SYMBOL_GPL(ata_eh_qc_complete);
-EXPORT_SYMBOL_GPL(ata_eh_qc_retry);
 
 EXPORT_SYMBOL_GPL(ata_pio_need_iordy);
 EXPORT_SYMBOL_GPL(ata_timing_compute);
@@ -5215,3 +5118,8 @@ EXPORT_SYMBOL_GPL(ata_device_suspend);
 EXPORT_SYMBOL_GPL(ata_device_resume);
 EXPORT_SYMBOL_GPL(ata_scsi_device_suspend);
 EXPORT_SYMBOL_GPL(ata_scsi_device_resume);
+
+EXPORT_SYMBOL_GPL(ata_scsi_error);
+EXPORT_SYMBOL_GPL(ata_eng_timeout);
+EXPORT_SYMBOL_GPL(ata_eh_qc_complete);
+EXPORT_SYMBOL_GPL(ata_eh_qc_retry);
diff --git a/drivers/scsi/libata-eh.c b/drivers/scsi/libata-eh.c
new file mode 100644
index 000000000000..e73f5612aea8
--- /dev/null
+++ b/drivers/scsi/libata-eh.c
@@ -0,0 +1,264 @@
+/*
+ *  libata-eh.c - libata error handling
+ *
+ *  Maintained by:  Jeff Garzik <jgarzik@pobox.com>
+ *                  Please ALWAYS copy linux-ide@vger.kernel.org
+ *                  on emails.
+ *
+ *  Copyright 2006 Tejun Heo <htejun@gmail.com>
+ *
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License as
+ *  published by the Free Software Foundation; either version 2, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ *  General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; see the file COPYING.  If not, write to
+ *  the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139,
+ *  USA.
+ *
+ *
+ *  libata documentation is available via 'make {ps|pdf}docs',
+ *  as Documentation/DocBook/libata.*
+ *
+ *  Hardware documentation available from http://www.t13.org/ and
+ *  http://www.sata-io.org/
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <scsi/scsi.h>
+#include <scsi/scsi_host.h>
+#include <scsi/scsi_eh.h>
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_cmnd.h>
+
+#include <linux/libata.h>
+
+#include "libata.h"
+
+/**
+ *      ata_scsi_timed_out - SCSI layer time out callback
+ *      @cmd: timed out SCSI command
+ *
+ *      Handles SCSI layer timeout.  We race with normal completion of
+ *      the qc for @cmd.  If the qc is already gone, we lose and let
+ *      the scsi command finish (EH_HANDLED).  Otherwise, the qc has
+ *      timed out and EH should be invoked.  Prevent ata_qc_complete()
+ *      from finishing it by setting EH_SCHEDULED and return
+ *      EH_NOT_HANDLED.
+ *
+ *      LOCKING:
+ *      Called from timer context
+ *
+ *      RETURNS:
+ *      EH_HANDLED or EH_NOT_HANDLED
+ */
+enum scsi_eh_timer_return ata_scsi_timed_out(struct scsi_cmnd *cmd)
+{
+        struct Scsi_Host *host = cmd->device->host;
+        struct ata_port *ap = (struct ata_port *) &host->hostdata[0];
+        unsigned long flags;
+        struct ata_queued_cmd *qc;
+        enum scsi_eh_timer_return ret = EH_HANDLED;
+
+        DPRINTK("ENTER\n");
+
+        spin_lock_irqsave(&ap->host_set->lock, flags);
+        qc = ata_qc_from_tag(ap, ap->active_tag);
+        if (qc) {
+                WARN_ON(qc->scsicmd != cmd);
+                qc->flags |= ATA_QCFLAG_EH_SCHEDULED;
+                qc->err_mask |= AC_ERR_TIMEOUT;
+                ret = EH_NOT_HANDLED;
+        }
+        spin_unlock_irqrestore(&ap->host_set->lock, flags);
+
+        DPRINTK("EXIT, ret=%d\n", ret);
+        return ret;
+}
+
+/**
+ *      ata_scsi_error - SCSI layer error handler callback
+ *      @host: SCSI host on which error occurred
+ *
+ *      Handles SCSI-layer-thrown error events.
+ *
+ *      LOCKING:
+ *      Inherited from SCSI layer (none, can sleep)
+ *
+ *      RETURNS:
+ *      Zero.
+ */
+int ata_scsi_error(struct Scsi_Host *host)
+{
+        struct ata_port *ap = (struct ata_port *)&host->hostdata[0];
+
+        DPRINTK("ENTER\n");
+
+        /* synchronize with IRQ handler and port task */
+        spin_unlock_wait(&ap->host_set->lock);
+        ata_port_flush_task(ap);
+
+        WARN_ON(ata_qc_from_tag(ap, ap->active_tag) == NULL);
+
+        ap->ops->eng_timeout(ap);
+
+        WARN_ON(host->host_failed || !list_empty(&host->eh_cmd_q));
+
+        scsi_eh_flush_done_q(&ap->eh_done_q);
+
+        DPRINTK("EXIT\n");
+        return 0;
+}
+
+/**
+ *      ata_qc_timeout - Handle timeout of queued command
+ *      @qc: Command that timed out
+ *
+ *      Some part of the kernel (currently, only the SCSI layer)
+ *      has noticed that the active command on port @ap has not
+ *      completed after a specified length of time.  Handle this
+ *      condition by disabling DMA (if necessary) and completing
+ *      transactions, with error if necessary.
+ *
+ *      This also handles the case of the "lost interrupt", where
+ *      for some reason (possibly hardware bug, possibly driver bug)
+ *      an interrupt was not delivered to the driver, even though the
+ *      transaction completed successfully.
+ *
+ *      LOCKING:
+ *      Inherited from SCSI layer (none, can sleep)
+ */
+static void ata_qc_timeout(struct ata_queued_cmd *qc)
+{
+        struct ata_port *ap = qc->ap;
+        struct ata_host_set *host_set = ap->host_set;
+        u8 host_stat = 0, drv_stat;
+        unsigned long flags;
+
+        DPRINTK("ENTER\n");
+
+        ap->hsm_task_state = HSM_ST_IDLE;
+
+        spin_lock_irqsave(&host_set->lock, flags);
+
+        switch (qc->tf.protocol) {
+
+        case ATA_PROT_DMA:
+        case ATA_PROT_ATAPI_DMA:
+                host_stat = ap->ops->bmdma_status(ap);
+
+                /* before we do anything else, clear DMA-Start bit */
+                ap->ops->bmdma_stop(qc);
+
+                /* fall through */
+
+        default:
+                ata_altstatus(ap);
+                drv_stat = ata_chk_status(ap);
+
+                /* ack bmdma irq events */
+                ap->ops->irq_clear(ap);
+
+                printk(KERN_ERR "ata%u: command 0x%x timeout, stat 0x%x host_stat 0x%x\n",
+                       ap->id, qc->tf.command, drv_stat, host_stat);
+
+                /* complete taskfile transaction */
+                qc->err_mask |= ac_err_mask(drv_stat);
+                break;
+        }
+
+        spin_unlock_irqrestore(&host_set->lock, flags);
+
+        ata_eh_qc_complete(qc);
+
+        DPRINTK("EXIT\n");
+}
+
+/**
+ *      ata_eng_timeout - Handle timeout of queued command
+ *      @ap: Port on which timed-out command is active
+ *
+ *      Some part of the kernel (currently, only the SCSI layer)
+ *      has noticed that the active command on port @ap has not
+ *      completed after a specified length of time.  Handle this
+ *      condition by disabling DMA (if necessary) and completing
+ *      transactions, with error if necessary.
+ *
+ *      This also handles the case of the "lost interrupt", where
+ *      for some reason (possibly hardware bug, possibly driver bug)
+ *      an interrupt was not delivered to the driver, even though the
+ *      transaction completed successfully.
+ *
+ *      LOCKING:
+ *      Inherited from SCSI layer (none, can sleep)
+ */
+void ata_eng_timeout(struct ata_port *ap)
+{
+        DPRINTK("ENTER\n");
+
+        ata_qc_timeout(ata_qc_from_tag(ap, ap->active_tag));
+
+        DPRINTK("EXIT\n");
+}
+
+static void ata_eh_scsidone(struct scsi_cmnd *scmd)
+{
+        /* nada */
+}
+
+static void __ata_eh_qc_complete(struct ata_queued_cmd *qc)
+{
+        struct ata_port *ap = qc->ap;
+        struct scsi_cmnd *scmd = qc->scsicmd;
+        unsigned long flags;
+
+        spin_lock_irqsave(&ap->host_set->lock, flags);
+        qc->scsidone = ata_eh_scsidone;
+        __ata_qc_complete(qc);
+        WARN_ON(ata_tag_valid(qc->tag));
+        spin_unlock_irqrestore(&ap->host_set->lock, flags);
+
+        scsi_eh_finish_cmd(scmd, &ap->eh_done_q);
+}
+
+/**
+ *      ata_eh_qc_complete - Complete an active ATA command from EH
+ *      @qc: Command to complete
+ *
+ *      Indicate to the mid and upper layers that an ATA command has
+ *      completed.  To be used from EH.
+ */
+void ata_eh_qc_complete(struct ata_queued_cmd *qc)
+{
+        struct scsi_cmnd *scmd = qc->scsicmd;
+        scmd->retries = scmd->allowed;
+        __ata_eh_qc_complete(qc);
+}
+
+/**
+ *      ata_eh_qc_retry - Tell midlayer to retry an ATA command after EH
+ *      @qc: Command to retry
+ *
+ *      Indicate to the mid and upper layers that an ATA command
+ *      should be retried.  To be used from EH.
+ *
+ *      SCSI midlayer limits the number of retries to scmd->allowed.
+ *      scmd->retries is decremented for commands which get retried
+ *      due to unrelated failures (qc->err_mask is zero).
+ */
+void ata_eh_qc_retry(struct ata_queued_cmd *qc)
+{
+        struct scsi_cmnd *scmd = qc->scsicmd;
+        if (!qc->err_mask && scmd->retries)
+                scmd->retries--;
+        __ata_eh_qc_complete(qc);
+}
diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c
index 44008150d310..745fc263feeb 100644
--- a/drivers/scsi/libata-scsi.c
+++ b/drivers/scsi/libata-scsi.c
@@ -53,7 +53,6 @@
 typedef unsigned int (*ata_xlat_func_t)(struct ata_queued_cmd *qc, const u8 *scsicmd);
 static struct ata_device *
 ata_scsi_find_dev(struct ata_port *ap, const struct scsi_device *scsidev);
-enum scsi_eh_timer_return ata_scsi_timed_out(struct scsi_cmnd *cmd);
 
 #define RW_RECOVERY_MPAGE 0x1
 #define RW_RECOVERY_MPAGE_LEN 12
@@ -714,135 +713,6 @@ int ata_scsi_slave_config(struct scsi_device *sdev)
 }
 
 /**
- *      ata_scsi_timed_out - SCSI layer time out callback
- *      @cmd: timed out SCSI command
- *
- *      Handles SCSI layer timeout.  We race with normal completion of
- *      the qc for @cmd.  If the qc is already gone, we lose and let
- *      the scsi command finish (EH_HANDLED).  Otherwise, the qc has
- *      timed out and EH should be invoked.  Prevent ata_qc_complete()
- *      from finishing it by setting EH_SCHEDULED and return
- *      EH_NOT_HANDLED.
- *
- *      LOCKING:
- *      Called from timer context
- *
- *      RETURNS:
- *      EH_HANDLED or EH_NOT_HANDLED
- */
-enum scsi_eh_timer_return ata_scsi_timed_out(struct scsi_cmnd *cmd)
-{
-        struct Scsi_Host *host = cmd->device->host;
-        struct ata_port *ap = (struct ata_port *) &host->hostdata[0];
-        unsigned long flags;
-        struct ata_queued_cmd *qc;
-        enum scsi_eh_timer_return ret = EH_HANDLED;
-
-        DPRINTK("ENTER\n");
-
-        spin_lock_irqsave(&ap->host_set->lock, flags);
-        qc = ata_qc_from_tag(ap, ap->active_tag);
-        if (qc) {
-                WARN_ON(qc->scsicmd != cmd);
-                qc->flags |= ATA_QCFLAG_EH_SCHEDULED;
-                qc->err_mask |= AC_ERR_TIMEOUT;
-                ret = EH_NOT_HANDLED;
-        }
-        spin_unlock_irqrestore(&ap->host_set->lock, flags);
-
-        DPRINTK("EXIT, ret=%d\n", ret);
-        return ret;
-}
-
-/**
- *      ata_scsi_error - SCSI layer error handler callback
- *      @host: SCSI host on which error occurred
- *
- *      Handles SCSI-layer-thrown error events.
- *
- *      LOCKING:
- *      Inherited from SCSI layer (none, can sleep)
- *
- *      RETURNS:
- *      Zero.
- */
-
-int ata_scsi_error(struct Scsi_Host *host)
-{
-        struct ata_port *ap = (struct ata_port *)&host->hostdata[0];
-
-        DPRINTK("ENTER\n");
-
-        /* synchronize with IRQ handler and port task */
-        spin_unlock_wait(&ap->host_set->lock);
-        ata_port_flush_task(ap);
-
-        WARN_ON(ata_qc_from_tag(ap, ap->active_tag) == NULL);
-
-        ap->ops->eng_timeout(ap);
-
-        WARN_ON(host->host_failed || !list_empty(&host->eh_cmd_q));
-
-        scsi_eh_flush_done_q(&ap->eh_done_q);
-
-        DPRINTK("EXIT\n");
-        return 0;
-}
-
-static void ata_eh_scsidone(struct scsi_cmnd *scmd)
-{
-        /* nada */
-}
-
-static void __ata_eh_qc_complete(struct ata_queued_cmd *qc)
-{
-        struct ata_port *ap = qc->ap;
-        struct scsi_cmnd *scmd = qc->scsicmd;
-        unsigned long flags;
-
-        spin_lock_irqsave(&ap->host_set->lock, flags);
-        qc->scsidone = ata_eh_scsidone;
-        __ata_qc_complete(qc);
-        WARN_ON(ata_tag_valid(qc->tag));
-        spin_unlock_irqrestore(&ap->host_set->lock, flags);
-
-        scsi_eh_finish_cmd(scmd, &ap->eh_done_q);
-}
-
-/**
- *      ata_eh_qc_complete - Complete an active ATA command from EH
- *      @qc: Command to complete
- *
- *      Indicate to the mid and upper layers that an ATA command has
- *      completed.  To be used from EH.
- */
-void ata_eh_qc_complete(struct ata_queued_cmd *qc)
-{
-        struct scsi_cmnd *scmd = qc->scsicmd;
-        scmd->retries = scmd->allowed;
-        __ata_eh_qc_complete(qc);
-}
-
-/**
- *      ata_eh_qc_retry - Tell midlayer to retry an ATA command after EH
- *      @qc: Command to retry
- *
- *      Indicate to the mid and upper layers that an ATA command
- *      should be retried.  To be used from EH.
- *
- *      SCSI midlayer limits the number of retries to scmd->allowed.
- *      scmd->retries is decremented for commands which get retried
- *      due to unrelated failures (qc->err_mask is zero).
- */
-void ata_eh_qc_retry(struct ata_queued_cmd *qc)
-{
-        struct scsi_cmnd *scmd = qc->scsicmd;
-        if (!qc->err_mask && scmd->retries)
-                scmd->retries--;
-        __ata_eh_qc_complete(qc);
-}
-
-/**
  *      ata_scsi_start_stop_xlat - Translate SCSI START STOP UNIT command
  *      @qc: Storage for translated ATA taskfile
  *      @scsicmd: SCSI command to translate
diff --git a/drivers/scsi/libata.h b/drivers/scsi/libata.h
index 1c755b14521a..75e9bd5833da 100644
--- a/drivers/scsi/libata.h
+++ b/drivers/scsi/libata.h
@@ -60,7 +60,6 @@ extern int ata_cmd_ioctl(struct scsi_device *scsidev, void __user *arg);
 extern struct scsi_transport_template ata_scsi_transport_template;
 
 extern void ata_scsi_scan_host(struct ata_port *ap);
-extern int ata_scsi_error(struct Scsi_Host *host);
 extern unsigned int ata_scsiop_inq_std(struct ata_scsi_args *args, u8 *rbuf,
                                unsigned int buflen);
 
@@ -90,4 +89,7 @@ extern void ata_scsi_rbuf_fill(struct ata_scsi_args *args,
                         unsigned int (*actor) (struct ata_scsi_args *args,
                                            u8 *rbuf, unsigned int buflen));
 
+/* libata-eh.c */
+extern enum scsi_eh_timer_return ata_scsi_timed_out(struct scsi_cmnd *cmd);
+
 #endif /* __LIBATA_H__ */
diff --git a/include/linux/libata.h b/include/linux/libata.h
index a6d829cb0567..75bdee09c307 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -531,9 +531,6 @@ extern void ata_host_set_remove(struct ata_host_set *host_set);
 extern int ata_scsi_detect(struct scsi_host_template *sht);
 extern int ata_scsi_ioctl(struct scsi_device *dev, int cmd, void __user *arg);
 extern int ata_scsi_queuecmd(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *));
-extern int ata_scsi_error(struct Scsi_Host *host);
-extern void ata_eh_qc_complete(struct ata_queued_cmd *qc);
-extern void ata_eh_qc_retry(struct ata_queued_cmd *qc);
 extern int ata_scsi_release(struct Scsi_Host *host);
 extern unsigned int ata_host_intr(struct ata_port *ap, struct ata_queued_cmd *qc);
 extern int ata_scsi_device_resume(struct scsi_device *);
@@ -582,7 +579,6 @@ extern void ata_bmdma_stop(struct ata_queued_cmd *qc);
 extern u8   ata_bmdma_status(struct ata_port *ap);
 extern void ata_bmdma_irq_clear(struct ata_port *ap);
 extern void __ata_qc_complete(struct ata_queued_cmd *qc);
-extern void ata_eng_timeout(struct ata_port *ap);
 extern void ata_scsi_simulate(struct ata_port *ap, struct ata_device *dev,
                               struct scsi_cmnd *cmd,
                               void (*done)(struct scsi_cmnd *));
@@ -637,6 +633,14 @@ extern int pci_test_config_bits(struct pci_dev *pdev, const struct pci_bits *bit
 extern unsigned long ata_pci_default_filter(const struct ata_port *, struct ata_device *, unsigned long);
 #endif /* CONFIG_PCI */
 
+/*
+ * EH
+ */
+extern int ata_scsi_error(struct Scsi_Host *host);
+extern void ata_eng_timeout(struct ata_port *ap);
+extern void ata_eh_qc_complete(struct ata_queued_cmd *qc);
+extern void ata_eh_qc_retry(struct ata_queued_cmd *qc);
+
 
 static inline int
 ata_sg_is_last(struct scatterlist *sg, struct ata_queued_cmd *qc)