aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--drivers/net/irda/act200l.c297
-rw-r--r--drivers/net/irda/actisys.c288
-rw-r--r--drivers/net/irda/ep7211_ir.c125
-rw-r--r--drivers/net/irda/esi.c149
-rw-r--r--drivers/net/irda/girbil.c250
-rw-r--r--drivers/net/irda/litelink.c179
-rw-r--r--drivers/net/irda/ma600.c354
-rw-r--r--drivers/net/irda/mcp2120.c240
-rw-r--r--drivers/net/irda/old_belkin.c164
-rw-r--r--drivers/net/irda/tekram.c282
10 files changed, 0 insertions, 2328 deletions
diff --git a/drivers/net/irda/act200l.c b/drivers/net/irda/act200l.c
deleted file mode 100644
index 756cd44e857a..000000000000
--- a/drivers/net/irda/act200l.c
+++ /dev/null
@@ -1,297 +0,0 @@
1/*********************************************************************
2 *
3 * Filename: act200l.c
4 * Version: 0.8
5 * Description: Implementation for the ACTiSYS ACT-IR200L dongle
6 * Status: Experimental.
7 * Author: SHIMIZU Takuya <tshimizu@ga2.so-net.ne.jp>
8 * Created at: Fri Aug 3 17:35:42 2001
9 * Modified at: Fri Aug 17 10:22:40 2001
10 * Modified by: SHIMIZU Takuya <tshimizu@ga2.so-net.ne.jp>
11 *
12 * Copyright (c) 2001 SHIMIZU Takuya, All Rights Reserved.
13 *
14 * This program is free software; you can redistribute it and/or
15 * modify it under the terms of the GNU General Public License as
16 * published by the Free Software Foundation; either version 2 of
17 * the License, or (at your option) any later version.
18 *
19 ********************************************************************/
20
21#include <linux/module.h>
22#include <linux/delay.h>
23#include <linux/tty.h>
24#include <linux/init.h>
25
26#include <net/irda/irda.h>
27#include <net/irda/irda_device.h>
28
29static int act200l_reset(struct irda_task *task);
30static void act200l_open(dongle_t *self, struct qos_info *qos);
31static void act200l_close(dongle_t *self);
32static int act200l_change_speed(struct irda_task *task);
33
34/* Regsiter 0: Control register #1 */
35#define ACT200L_REG0 0x00
36#define ACT200L_TXEN 0x01 /* Enable transmitter */
37#define ACT200L_RXEN 0x02 /* Enable receiver */
38
39/* Register 1: Control register #2 */
40#define ACT200L_REG1 0x10
41#define ACT200L_LODB 0x01 /* Load new baud rate count value */
42#define ACT200L_WIDE 0x04 /* Expand the maximum allowable pulse */
43
44/* Register 4: Output Power register */
45#define ACT200L_REG4 0x40
46#define ACT200L_OP0 0x01 /* Enable LED1C output */
47#define ACT200L_OP1 0x02 /* Enable LED2C output */
48#define ACT200L_BLKR 0x04
49
50/* Register 5: Receive Mode register */
51#define ACT200L_REG5 0x50
52#define ACT200L_RWIDL 0x01 /* fixed 1.6us pulse mode */
53
54/* Register 6: Receive Sensitivity register #1 */
55#define ACT200L_REG6 0x60
56#define ACT200L_RS0 0x01 /* receive threshold bit 0 */
57#define ACT200L_RS1 0x02 /* receive threshold bit 1 */
58
59/* Register 7: Receive Sensitivity register #2 */
60#define ACT200L_REG7 0x70
61#define ACT200L_ENPOS 0x04 /* Ignore the falling edge */
62
63/* Register 8,9: Baud Rate Dvider register #1,#2 */
64#define ACT200L_REG8 0x80
65#define ACT200L_REG9 0x90
66
67#define ACT200L_2400 0x5f
68#define ACT200L_9600 0x17
69#define ACT200L_19200 0x0b
70#define ACT200L_38400 0x05
71#define ACT200L_57600 0x03
72#define ACT200L_115200 0x01
73
74/* Register 13: Control register #3 */
75#define ACT200L_REG13 0xd0
76#define ACT200L_SHDW 0x01 /* Enable access to shadow registers */
77
78/* Register 15: Status register */
79#define ACT200L_REG15 0xf0
80
81/* Register 21: Control register #4 */
82#define ACT200L_REG21 0x50
83#define ACT200L_EXCK 0x02 /* Disable clock output driver */
84#define ACT200L_OSCL 0x04 /* oscillator in low power, medium accuracy mode */
85
86static struct dongle_reg dongle = {
87 .type = IRDA_ACT200L_DONGLE,
88 .open = act200l_open,
89 .close = act200l_close,
90 .reset = act200l_reset,
91 .change_speed = act200l_change_speed,
92 .owner = THIS_MODULE,
93};
94
95static int __init act200l_init(void)
96{
97 return irda_device_register_dongle(&dongle);
98}
99
100static void __exit act200l_cleanup(void)
101{
102 irda_device_unregister_dongle(&dongle);
103}
104
105static void act200l_open(dongle_t *self, struct qos_info *qos)
106{
107 IRDA_DEBUG(2, "%s()\n", __FUNCTION__ );
108
109 /* Power on the dongle */
110 self->set_dtr_rts(self->dev, TRUE, TRUE);
111
112 /* Set the speeds we can accept */
113 qos->baud_rate.bits &= IR_9600|IR_19200|IR_38400|IR_57600|IR_115200;
114 qos->min_turn_time.bits = 0x03;
115}
116
117static void act200l_close(dongle_t *self)
118{
119 IRDA_DEBUG(2, "%s()\n", __FUNCTION__ );
120
121 /* Power off the dongle */
122 self->set_dtr_rts(self->dev, FALSE, FALSE);
123}
124
125/*
126 * Function act200l_change_speed (dev, speed)
127 *
128 * Set the speed for the ACTiSYS ACT-IR200L type dongle.
129 *
130 */
131static int act200l_change_speed(struct irda_task *task)
132{
133 dongle_t *self = (dongle_t *) task->instance;
134 __u32 speed = (__u32) task->param;
135 __u8 control[3];
136 int ret = 0;
137
138 IRDA_DEBUG(2, "%s()\n", __FUNCTION__ );
139
140 self->speed_task = task;
141
142 switch (task->state) {
143 case IRDA_TASK_INIT:
144 if (irda_task_execute(self, act200l_reset, NULL, task,
145 (void *) speed))
146 {
147 /* Dongle need more time to reset */
148 irda_task_next_state(task, IRDA_TASK_CHILD_WAIT);
149
150 /* Give reset 1 sec to finish */
151 ret = msecs_to_jiffies(1000);
152 }
153 break;
154 case IRDA_TASK_CHILD_WAIT:
155 IRDA_WARNING("%s(), resetting dongle timed out!\n",
156 __FUNCTION__);
157 ret = -1;
158 break;
159 case IRDA_TASK_CHILD_DONE:
160 /* Clear DTR and set RTS to enter command mode */
161 self->set_dtr_rts(self->dev, FALSE, TRUE);
162
163 switch (speed) {
164 case 9600:
165 default:
166 control[0] = ACT200L_REG8 | (ACT200L_9600 & 0x0f);
167 control[1] = ACT200L_REG9 | ((ACT200L_9600 >> 4) & 0x0f);
168 break;
169 case 19200:
170 control[0] = ACT200L_REG8 | (ACT200L_19200 & 0x0f);
171 control[1] = ACT200L_REG9 | ((ACT200L_19200 >> 4) & 0x0f);
172 break;
173 case 38400:
174 control[0] = ACT200L_REG8 | (ACT200L_38400 & 0x0f);
175 control[1] = ACT200L_REG9 | ((ACT200L_38400 >> 4) & 0x0f);
176 break;
177 case 57600:
178 control[0] = ACT200L_REG8 | (ACT200L_57600 & 0x0f);
179 control[1] = ACT200L_REG9 | ((ACT200L_57600 >> 4) & 0x0f);
180 break;
181 case 115200:
182 control[0] = ACT200L_REG8 | (ACT200L_115200 & 0x0f);
183 control[1] = ACT200L_REG9 | ((ACT200L_115200 >> 4) & 0x0f);
184 break;
185 }
186 control[2] = ACT200L_REG1 | ACT200L_LODB | ACT200L_WIDE;
187
188 /* Write control bytes */
189 self->write(self->dev, control, 3);
190 irda_task_next_state(task, IRDA_TASK_WAIT);
191 ret = msecs_to_jiffies(5);
192 break;
193 case IRDA_TASK_WAIT:
194 /* Go back to normal mode */
195 self->set_dtr_rts(self->dev, TRUE, TRUE);
196
197 irda_task_next_state(task, IRDA_TASK_DONE);
198 self->speed_task = NULL;
199 break;
200 default:
201 IRDA_ERROR("%s(), unknown state %d\n",
202 __FUNCTION__, task->state);
203 irda_task_next_state(task, IRDA_TASK_DONE);
204 self->speed_task = NULL;
205 ret = -1;
206 break;
207 }
208 return ret;
209}
210
211/*
212 * Function act200l_reset (driver)
213 *
214 * Reset the ACTiSYS ACT-IR200L type dongle.
215 */
216static int act200l_reset(struct irda_task *task)
217{
218 dongle_t *self = (dongle_t *) task->instance;
219 __u8 control[9] = {
220 ACT200L_REG15,
221 ACT200L_REG13 | ACT200L_SHDW,
222 ACT200L_REG21 | ACT200L_EXCK | ACT200L_OSCL,
223 ACT200L_REG13,
224 ACT200L_REG7 | ACT200L_ENPOS,
225 ACT200L_REG6 | ACT200L_RS0 | ACT200L_RS1,
226 ACT200L_REG5 | ACT200L_RWIDL,
227 ACT200L_REG4 | ACT200L_OP0 | ACT200L_OP1 | ACT200L_BLKR,
228 ACT200L_REG0 | ACT200L_TXEN | ACT200L_RXEN
229 };
230 int ret = 0;
231
232 IRDA_DEBUG(2, "%s()\n", __FUNCTION__ );
233
234 self->reset_task = task;
235
236 switch (task->state) {
237 case IRDA_TASK_INIT:
238 /* Power on the dongle */
239 self->set_dtr_rts(self->dev, TRUE, TRUE);
240
241 irda_task_next_state(task, IRDA_TASK_WAIT1);
242 ret = msecs_to_jiffies(50);
243 break;
244 case IRDA_TASK_WAIT1:
245 /* Reset the dongle : set RTS low for 25 ms */
246 self->set_dtr_rts(self->dev, TRUE, FALSE);
247
248 irda_task_next_state(task, IRDA_TASK_WAIT2);
249 ret = msecs_to_jiffies(50);
250 break;
251 case IRDA_TASK_WAIT2:
252 /* Clear DTR and set RTS to enter command mode */
253 self->set_dtr_rts(self->dev, FALSE, TRUE);
254
255 /* Write control bytes */
256 self->write(self->dev, control, 9);
257 irda_task_next_state(task, IRDA_TASK_WAIT3);
258 ret = msecs_to_jiffies(15);
259 break;
260 case IRDA_TASK_WAIT3:
261 /* Go back to normal mode */
262 self->set_dtr_rts(self->dev, TRUE, TRUE);
263
264 irda_task_next_state(task, IRDA_TASK_DONE);
265 self->reset_task = NULL;
266 break;
267 default:
268 IRDA_ERROR("%s(), unknown state %d\n",
269 __FUNCTION__, task->state);
270 irda_task_next_state(task, IRDA_TASK_DONE);
271 self->reset_task = NULL;
272 ret = -1;
273 break;
274 }
275 return ret;
276}
277
278MODULE_AUTHOR("SHIMIZU Takuya <tshimizu@ga2.so-net.ne.jp>");
279MODULE_DESCRIPTION("ACTiSYS ACT-IR200L dongle driver");
280MODULE_LICENSE("GPL");
281MODULE_ALIAS("irda-dongle-10"); /* IRDA_ACT200L_DONGLE */
282
283/*
284 * Function init_module (void)
285 *
286 * Initialize ACTiSYS ACT-IR200L module
287 *
288 */
289module_init(act200l_init);
290
291/*
292 * Function cleanup_module (void)
293 *
294 * Cleanup ACTiSYS ACT-IR200L module
295 *
296 */
297module_exit(act200l_cleanup);
diff --git a/drivers/net/irda/actisys.c b/drivers/net/irda/actisys.c
deleted file mode 100644
index ae0b80a5680c..000000000000
--- a/drivers/net/irda/actisys.c
+++ /dev/null
@@ -1,288 +0,0 @@
1/*********************************************************************
2 *
3 * Filename: actisys.c
4 * Version: 1.0
5 * Description: Implementation for the ACTiSYS IR-220L and IR-220L+
6 * dongles
7 * Status: Beta.
8 * Authors: Dag Brattli <dagb@cs.uit.no> (initially)
9 * Jean Tourrilhes <jt@hpl.hp.com> (new version)
10 * Created at: Wed Oct 21 20:02:35 1998
11 * Modified at: Fri Dec 17 09:10:43 1999
12 * Modified by: Dag Brattli <dagb@cs.uit.no>
13 *
14 * Copyright (c) 1998-1999 Dag Brattli, All Rights Reserved.
15 * Copyright (c) 1999 Jean Tourrilhes
16 *
17 * This program is free software; you can redistribute it and/or
18 * modify it under the terms of the GNU General Public License as
19 * published by the Free Software Foundation; either version 2 of
20 * the License, or (at your option) any later version.
21 *
22 * Neither Dag Brattli nor University of Tromsø admit liability nor
23 * provide warranty for any of this software. This material is
24 * provided "AS-IS" and at no charge.
25 *
26 ********************************************************************/
27
28/*
29 * Changelog
30 *
31 * 0.8 -> 0.9999 - Jean
32 * o New initialisation procedure : much safer and correct
33 * o New procedure the change speed : much faster and simpler
34 * o Other cleanups & comments
35 * Thanks to Lichen Wang @ Actisys for his excellent help...
36 */
37
38#include <linux/module.h>
39#include <linux/delay.h>
40#include <linux/tty.h>
41#include <linux/init.h>
42
43#include <net/irda/irda.h>
44#include <net/irda/irda_device.h>
45
46/*
47 * Define the timing of the pulses we send to the dongle (to reset it, and
48 * to toggle speeds). Basically, the limit here is the propagation speed of
49 * the signals through the serial port, the dongle being much faster. Any
50 * serial port support 115 kb/s, so we are sure that pulses 8.5 us wide can
51 * go through cleanly . If you are on the wild side, you can try to lower
52 * this value (Actisys recommended me 2 us, and 0 us work for me on a P233!)
53 */
54#define MIN_DELAY 10 /* 10 us to be on the conservative side */
55
56static int actisys_change_speed(struct irda_task *task);
57static int actisys_reset(struct irda_task *task);
58static void actisys_open(dongle_t *self, struct qos_info *qos);
59static void actisys_close(dongle_t *self);
60
61/* These are the baudrates supported, in the order available */
62/* Note : the 220L doesn't support 38400, but we will fix that below */
63static __u32 baud_rates[] = { 9600, 19200, 57600, 115200, 38400 };
64#define MAX_SPEEDS 5
65
66static struct dongle_reg dongle = {
67 .type = IRDA_ACTISYS_DONGLE,
68 .open = actisys_open,
69 .close = actisys_close,
70 .reset = actisys_reset,
71 .change_speed = actisys_change_speed,
72 .owner = THIS_MODULE,
73};
74
75static struct dongle_reg dongle_plus = {
76 .type = IRDA_ACTISYS_PLUS_DONGLE,
77 .open = actisys_open,
78 .close = actisys_close,
79 .reset = actisys_reset,
80 .change_speed = actisys_change_speed,
81 .owner = THIS_MODULE,
82};
83
84/*
85 * Function actisys_change_speed (task)
86 *
87 * There is two model of Actisys dongle we are dealing with,
88 * the 220L and 220L+. At this point, only irattach knows with
89 * kind the user has requested (it was an argument on irattach
90 * command line).
91 * So, we register a dongle of each sort and let irattach
92 * pick the right one...
93 */
94static int __init actisys_init(void)
95{
96 int ret;
97
98 /* First, register an Actisys 220L dongle */
99 ret = irda_device_register_dongle(&dongle);
100 if (ret < 0)
101 return ret;
102 /* Now, register an Actisys 220L+ dongle */
103 ret = irda_device_register_dongle(&dongle_plus);
104 if (ret < 0) {
105 irda_device_unregister_dongle(&dongle);
106 return ret;
107 }
108 return 0;
109}
110
111static void __exit actisys_cleanup(void)
112{
113 /* We have to remove both dongles */
114 irda_device_unregister_dongle(&dongle);
115 irda_device_unregister_dongle(&dongle_plus);
116}
117
118static void actisys_open(dongle_t *self, struct qos_info *qos)
119{
120 /* Power on the dongle */
121 self->set_dtr_rts(self->dev, TRUE, TRUE);
122
123 /* Set the speeds we can accept */
124 qos->baud_rate.bits &= IR_9600|IR_19200|IR_38400|IR_57600|IR_115200;
125
126 /* Remove support for 38400 if this is not a 220L+ dongle */
127 if (self->issue->type == IRDA_ACTISYS_DONGLE)
128 qos->baud_rate.bits &= ~IR_38400;
129
130 qos->min_turn_time.bits = 0x7f; /* Needs 0.01 ms */
131}
132
133static void actisys_close(dongle_t *self)
134{
135 /* Power off the dongle */
136 self->set_dtr_rts(self->dev, FALSE, FALSE);
137}
138
139/*
140 * Function actisys_change_speed (task)
141 *
142 * Change speed of the ACTiSYS IR-220L and IR-220L+ type IrDA dongles.
143 * To cycle through the available baud rates, pulse RTS low for a few us.
144 *
145 * First, we reset the dongle to always start from a known state.
146 * Then, we cycle through the speeds by pulsing RTS low and then up.
147 * The dongle allow us to pulse quite fast, se we can set speed in one go,
148 * which is must faster ( < 100 us) and less complex than what is found
149 * in some other dongle drivers...
150 * Note that even if the new speed is the same as the current speed,
151 * we reassert the speed. This make sure that things are all right,
152 * and it's fast anyway...
153 * By the way, this function will work for both type of dongles,
154 * because the additional speed is at the end of the sequence...
155 */
156static int actisys_change_speed(struct irda_task *task)
157{
158 dongle_t *self = (dongle_t *) task->instance;
159 __u32 speed = (__u32) task->param; /* Target speed */
160 int ret = 0;
161 int i = 0;
162
163 IRDA_DEBUG(4, "%s(), speed=%d (was %d)\n", __FUNCTION__, speed,
164 self->speed);
165
166 /* Go to a known state by reseting the dongle */
167
168 /* Reset the dongle : set DTR low for 10 us */
169 self->set_dtr_rts(self->dev, FALSE, TRUE);
170 udelay(MIN_DELAY);
171
172 /* Go back to normal mode (we are now at 9600 b/s) */
173 self->set_dtr_rts(self->dev, TRUE, TRUE);
174
175 /*
176 * Now, we can set the speed requested. Send RTS pulses until we
177 * reach the target speed
178 */
179 for (i=0; i<MAX_SPEEDS; i++) {
180 if (speed == baud_rates[i]) {
181 self->speed = baud_rates[i];
182 break;
183 }
184 /* Make sure previous pulse is finished */
185 udelay(MIN_DELAY);
186
187 /* Set RTS low for 10 us */
188 self->set_dtr_rts(self->dev, TRUE, FALSE);
189 udelay(MIN_DELAY);
190
191 /* Set RTS high for 10 us */
192 self->set_dtr_rts(self->dev, TRUE, TRUE);
193 }
194
195 /* Check if life is sweet... */
196 if (i >= MAX_SPEEDS)
197 ret = -1; /* This should not happen */
198
199 /* Basta lavoro, on se casse d'ici... */
200 irda_task_next_state(task, IRDA_TASK_DONE);
201
202 return ret;
203}
204
205/*
206 * Function actisys_reset (task)
207 *
208 * Reset the Actisys type dongle. Warning, this function must only be
209 * called with a process context!
210 *
211 * We need to do two things in this function :
212 * o first make sure that the dongle is in a state where it can operate
213 * o second put the dongle in a know state
214 *
215 * The dongle is powered of the RTS and DTR lines. In the dongle, there
216 * is a big capacitor to accommodate the current spikes. This capacitor
217 * takes a least 50 ms to be charged. In theory, the Bios set those lines
218 * up, so by the time we arrive here we should be set. It doesn't hurt
219 * to be on the conservative side, so we will wait...
220 * Then, we set the speed to 9600 b/s to get in a known state (see in
221 * change_speed for details). It is needed because the IrDA stack
222 * has tried to set the speed immediately after our first return,
223 * so before we can be sure the dongle is up and running.
224 */
225static int actisys_reset(struct irda_task *task)
226{
227 dongle_t *self = (dongle_t *) task->instance;
228 int ret = 0;
229
230 IRDA_ASSERT(task != NULL, return -1;);
231
232 self->reset_task = task;
233
234 switch (task->state) {
235 case IRDA_TASK_INIT:
236 /* Set both DTR & RTS to power up the dongle */
237 /* In theory redundant with power up in actisys_open() */
238 self->set_dtr_rts(self->dev, TRUE, TRUE);
239
240 /* Sleep 50 ms to make sure capacitor is charged */
241 ret = msecs_to_jiffies(50);
242 irda_task_next_state(task, IRDA_TASK_WAIT);
243 break;
244 case IRDA_TASK_WAIT:
245 /* Reset the dongle : set DTR low for 10 us */
246 self->set_dtr_rts(self->dev, FALSE, TRUE);
247 udelay(MIN_DELAY);
248
249 /* Go back to normal mode */
250 self->set_dtr_rts(self->dev, TRUE, TRUE);
251
252 irda_task_next_state(task, IRDA_TASK_DONE);
253 self->reset_task = NULL;
254 self->speed = 9600; /* That's the default */
255 break;
256 default:
257 IRDA_ERROR("%s(), unknown state %d\n",
258 __FUNCTION__, task->state);
259 irda_task_next_state(task, IRDA_TASK_DONE);
260 self->reset_task = NULL;
261 ret = -1;
262 break;
263 }
264 return ret;
265}
266
267MODULE_AUTHOR("Dag Brattli <dagb@cs.uit.no> - Jean Tourrilhes <jt@hpl.hp.com>");
268MODULE_DESCRIPTION("ACTiSYS IR-220L and IR-220L+ dongle driver");
269MODULE_LICENSE("GPL");
270MODULE_ALIAS("irda-dongle-2"); /* IRDA_ACTISYS_DONGLE */
271MODULE_ALIAS("irda-dongle-3"); /* IRDA_ACTISYS_PLUS_DONGLE */
272
273
274/*
275 * Function init_module (void)
276 *
277 * Initialize Actisys module
278 *
279 */
280module_init(actisys_init);
281
282/*
283 * Function cleanup_module (void)
284 *
285 * Cleanup Actisys module
286 *
287 */
288module_exit(actisys_cleanup);
diff --git a/drivers/net/irda/ep7211_ir.c b/drivers/net/irda/ep7211_ir.c
deleted file mode 100644
index 4cba38f7e4a8..000000000000
--- a/drivers/net/irda/ep7211_ir.c
+++ /dev/null
@@ -1,125 +0,0 @@
1/*
2 * IR port driver for the Cirrus Logic EP7211 processor.
3 *
4 * Copyright 2001, Blue Mug Inc. All rights reserved.
5 */
6
7#include <linux/module.h>
8#include <linux/delay.h>
9#include <linux/tty.h>
10#include <linux/init.h>
11#include <linux/spinlock.h>
12
13#include <net/irda/irda.h>
14#include <net/irda/irda_device.h>
15
16#include <asm/io.h>
17#include <asm/hardware.h>
18
19#define MIN_DELAY 25 /* 15 us, but wait a little more to be sure */
20#define MAX_DELAY 10000 /* 1 ms */
21
22static void ep7211_ir_open(dongle_t *self, struct qos_info *qos);
23static void ep7211_ir_close(dongle_t *self);
24static int ep7211_ir_change_speed(struct irda_task *task);
25static int ep7211_ir_reset(struct irda_task *task);
26
27static DEFINE_SPINLOCK(ep7211_lock);
28
29static struct dongle_reg dongle = {
30 .type = IRDA_EP7211_IR,
31 .open = ep7211_ir_open,
32 .close = ep7211_ir_close,
33 .reset = ep7211_ir_reset,
34 .change_speed = ep7211_ir_change_speed,
35 .owner = THIS_MODULE,
36};
37
38static void ep7211_ir_open(dongle_t *self, struct qos_info *qos)
39{
40 unsigned int syscon1, flags;
41
42 spin_lock_irqsave(&ep7211_lock, flags);
43
44 /* Turn on the SIR encoder. */
45 syscon1 = clps_readl(SYSCON1);
46 syscon1 |= SYSCON1_SIREN;
47 clps_writel(syscon1, SYSCON1);
48
49 /* XXX: We should disable modem status interrupts on the first
50 UART (interrupt #14). */
51
52 spin_unlock_irqrestore(&ep7211_lock, flags);
53}
54
55static void ep7211_ir_close(dongle_t *self)
56{
57 unsigned int syscon1, flags;
58
59 spin_lock_irqsave(&ep7211_lock, flags);
60
61 /* Turn off the SIR encoder. */
62 syscon1 = clps_readl(SYSCON1);
63 syscon1 &= ~SYSCON1_SIREN;
64 clps_writel(syscon1, SYSCON1);
65
66 /* XXX: If we've disabled the modem status interrupts, we should
67 reset them back to their original state. */
68
69 spin_unlock_irqrestore(&ep7211_lock, flags);
70}
71
72/*
73 * Function ep7211_ir_change_speed (task)
74 *
75 * Change speed of the EP7211 I/R port. We don't really have to do anything
76 * for the EP7211 as long as the rate is being changed at the serial port
77 * level.
78 */
79static int ep7211_ir_change_speed(struct irda_task *task)
80{
81 irda_task_next_state(task, IRDA_TASK_DONE);
82 return 0;
83}
84
85/*
86 * Function ep7211_ir_reset (task)
87 *
88 * Reset the EP7211 I/R. We don't really have to do anything.
89 *
90 */
91static int ep7211_ir_reset(struct irda_task *task)
92{
93 irda_task_next_state(task, IRDA_TASK_DONE);
94 return 0;
95}
96
97/*
98 * Function ep7211_ir_init(void)
99 *
100 * Initialize EP7211 I/R module
101 *
102 */
103static int __init ep7211_ir_init(void)
104{
105 return irda_device_register_dongle(&dongle);
106}
107
108/*
109 * Function ep7211_ir_cleanup(void)
110 *
111 * Cleanup EP7211 I/R module
112 *
113 */
114static void __exit ep7211_ir_cleanup(void)
115{
116 irda_device_unregister_dongle(&dongle);
117}
118
119MODULE_AUTHOR("Jon McClintock <jonm@bluemug.com>");
120MODULE_DESCRIPTION("EP7211 I/R driver");
121MODULE_LICENSE("GPL");
122MODULE_ALIAS("irda-dongle-8"); /* IRDA_EP7211_IR */
123
124module_init(ep7211_ir_init);
125module_exit(ep7211_ir_cleanup);
diff --git a/drivers/net/irda/esi.c b/drivers/net/irda/esi.c
deleted file mode 100644
index d3a61af6402d..000000000000
--- a/drivers/net/irda/esi.c
+++ /dev/null
@@ -1,149 +0,0 @@
1/*********************************************************************
2 *
3 * Filename: esi.c
4 * Version: 1.5
5 * Description: Driver for the Extended Systems JetEye PC dongle
6 * Status: Experimental.
7 * Author: Dag Brattli <dagb@cs.uit.no>
8 * Created at: Sat Feb 21 18:54:38 1998
9 * Modified at: Fri Dec 17 09:14:04 1999
10 * Modified by: Dag Brattli <dagb@cs.uit.no>
11 *
12 * Copyright (c) 1999 Dag Brattli, <dagb@cs.uit.no>,
13 * Copyright (c) 1998 Thomas Davis, <ratbert@radiks.net>,
14 * All Rights Reserved.
15 *
16 * This program is free software; you can redistribute it and/or
17 * modify it under the terms of the GNU General Public License as
18 * published by the Free Software Foundation; either version 2 of
19 * the License, or (at your option) any later version.
20 *
21 * This program is distributed in the hope that it will be useful,
22 * but WITHOUT ANY WARRANTY; without even the implied warranty of
23 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
24 * GNU General Public License for more details.
25 *
26 * You should have received a copy of the GNU General Public License
27 * along with this program; if not, write to the Free Software
28 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
29 * MA 02111-1307 USA
30 *
31 ********************************************************************/
32
33#include <linux/module.h>
34#include <linux/delay.h>
35#include <linux/tty.h>
36#include <linux/init.h>
37
38#include <net/irda/irda.h>
39#include <net/irda/irda_device.h>
40
41static void esi_open(dongle_t *self, struct qos_info *qos);
42static void esi_close(dongle_t *self);
43static int esi_change_speed(struct irda_task *task);
44static int esi_reset(struct irda_task *task);
45
46static struct dongle_reg dongle = {
47 .type = IRDA_ESI_DONGLE,
48 .open = esi_open,
49 .close = esi_close,
50 .reset = esi_reset,
51 .change_speed = esi_change_speed,
52 .owner = THIS_MODULE,
53};
54
55static int __init esi_init(void)
56{
57 return irda_device_register_dongle(&dongle);
58}
59
60static void __exit esi_cleanup(void)
61{
62 irda_device_unregister_dongle(&dongle);
63}
64
65static void esi_open(dongle_t *self, struct qos_info *qos)
66{
67 qos->baud_rate.bits &= IR_9600|IR_19200|IR_115200;
68 qos->min_turn_time.bits = 0x01; /* Needs at least 10 ms */
69}
70
71static void esi_close(dongle_t *dongle)
72{
73 /* Power off dongle */
74 dongle->set_dtr_rts(dongle->dev, FALSE, FALSE);
75}
76
77/*
78 * Function esi_change_speed (task)
79 *
80 * Set the speed for the Extended Systems JetEye PC ESI-9680 type dongle
81 *
82 */
83static int esi_change_speed(struct irda_task *task)
84{
85 dongle_t *self = (dongle_t *) task->instance;
86 __u32 speed = (__u32) task->param;
87 int dtr, rts;
88
89 switch (speed) {
90 case 19200:
91 dtr = TRUE;
92 rts = FALSE;
93 break;
94 case 115200:
95 dtr = rts = TRUE;
96 break;
97 case 9600:
98 default:
99 dtr = FALSE;
100 rts = TRUE;
101 break;
102 }
103
104 /* Change speed of dongle */
105 self->set_dtr_rts(self->dev, dtr, rts);
106 self->speed = speed;
107
108 irda_task_next_state(task, IRDA_TASK_DONE);
109
110 return 0;
111}
112
113/*
114 * Function esi_reset (task)
115 *
116 * Reset dongle;
117 *
118 */
119static int esi_reset(struct irda_task *task)
120{
121 dongle_t *self = (dongle_t *) task->instance;
122
123 self->set_dtr_rts(self->dev, FALSE, FALSE);
124 irda_task_next_state(task, IRDA_TASK_DONE);
125
126 return 0;
127}
128
129MODULE_AUTHOR("Dag Brattli <dagb@cs.uit.no>");
130MODULE_DESCRIPTION("Extended Systems JetEye PC dongle driver");
131MODULE_LICENSE("GPL");
132MODULE_ALIAS("irda-dongle-1"); /* IRDA_ESI_DONGLE */
133
134/*
135 * Function init_module (void)
136 *
137 * Initialize ESI module
138 *
139 */
140module_init(esi_init);
141
142/*
143 * Function cleanup_module (void)
144 *
145 * Cleanup ESI module
146 *
147 */
148module_exit(esi_cleanup);
149
diff --git a/drivers/net/irda/girbil.c b/drivers/net/irda/girbil.c
deleted file mode 100644
index 1f57391a618b..000000000000
--- a/drivers/net/irda/girbil.c
+++ /dev/null
@@ -1,250 +0,0 @@
1/*********************************************************************
2 *
3 * Filename: girbil.c
4 * Version: 1.2
5 * Description: Implementation for the Greenwich GIrBIL dongle
6 * Status: Experimental.
7 * Author: Dag Brattli <dagb@cs.uit.no>
8 * Created at: Sat Feb 6 21:02:33 1999
9 * Modified at: Fri Dec 17 09:13:20 1999
10 * Modified by: Dag Brattli <dagb@cs.uit.no>
11 *
12 * Copyright (c) 1999 Dag Brattli, All Rights Reserved.
13 *
14 * This program is free software; you can redistribute it and/or
15 * modify it under the terms of the GNU General Public License as
16 * published by the Free Software Foundation; either version 2 of
17 * the License, or (at your option) any later version.
18 *
19 * Neither Dag Brattli nor University of Tromsø admit liability nor
20 * provide warranty for any of this software. This material is
21 * provided "AS-IS" and at no charge.
22 *
23 ********************************************************************/
24
25#include <linux/module.h>
26#include <linux/delay.h>
27#include <linux/tty.h>
28#include <linux/init.h>
29
30#include <net/irda/irda.h>
31#include <net/irda/irda_device.h>
32
33static int girbil_reset(struct irda_task *task);
34static void girbil_open(dongle_t *self, struct qos_info *qos);
35static void girbil_close(dongle_t *self);
36static int girbil_change_speed(struct irda_task *task);
37
38/* Control register 1 */
39#define GIRBIL_TXEN 0x01 /* Enable transmitter */
40#define GIRBIL_RXEN 0x02 /* Enable receiver */
41#define GIRBIL_ECAN 0x04 /* Cancel self emmited data */
42#define GIRBIL_ECHO 0x08 /* Echo control characters */
43
44/* LED Current Register (0x2) */
45#define GIRBIL_HIGH 0x20
46#define GIRBIL_MEDIUM 0x21
47#define GIRBIL_LOW 0x22
48
49/* Baud register (0x3) */
50#define GIRBIL_2400 0x30
51#define GIRBIL_4800 0x31
52#define GIRBIL_9600 0x32
53#define GIRBIL_19200 0x33
54#define GIRBIL_38400 0x34
55#define GIRBIL_57600 0x35
56#define GIRBIL_115200 0x36
57
58/* Mode register (0x4) */
59#define GIRBIL_IRDA 0x40
60#define GIRBIL_ASK 0x41
61
62/* Control register 2 (0x5) */
63#define GIRBIL_LOAD 0x51 /* Load the new baud rate value */
64
65static struct dongle_reg dongle = {
66 .type = IRDA_GIRBIL_DONGLE,
67 .open = girbil_open,
68 .close = girbil_close,
69 .reset = girbil_reset,
70 .change_speed = girbil_change_speed,
71 .owner = THIS_MODULE,
72};
73
74static int __init girbil_init(void)
75{
76 return irda_device_register_dongle(&dongle);
77}
78
79static void __exit girbil_cleanup(void)
80{
81 irda_device_unregister_dongle(&dongle);
82}
83
84static void girbil_open(dongle_t *self, struct qos_info *qos)
85{
86 qos->baud_rate.bits &= IR_9600|IR_19200|IR_38400|IR_57600|IR_115200;
87 qos->min_turn_time.bits = 0x03;
88}
89
90static void girbil_close(dongle_t *self)
91{
92 /* Power off dongle */
93 self->set_dtr_rts(self->dev, FALSE, FALSE);
94}
95
96/*
97 * Function girbil_change_speed (dev, speed)
98 *
99 * Set the speed for the Girbil type dongle.
100 *
101 */
102static int girbil_change_speed(struct irda_task *task)
103{
104 dongle_t *self = (dongle_t *) task->instance;
105 __u32 speed = (__u32) task->param;
106 __u8 control[2];
107 int ret = 0;
108
109 self->speed_task = task;
110
111 switch (task->state) {
112 case IRDA_TASK_INIT:
113 /* Need to reset the dongle and go to 9600 bps before
114 programming */
115 if (irda_task_execute(self, girbil_reset, NULL, task,
116 (void *) speed))
117 {
118 /* Dongle need more time to reset */
119 irda_task_next_state(task, IRDA_TASK_CHILD_WAIT);
120
121 /* Give reset 1 sec to finish */
122 ret = msecs_to_jiffies(1000);
123 }
124 break;
125 case IRDA_TASK_CHILD_WAIT:
126 IRDA_WARNING("%s(), resetting dongle timed out!\n",
127 __FUNCTION__);
128 ret = -1;
129 break;
130 case IRDA_TASK_CHILD_DONE:
131 /* Set DTR and Clear RTS to enter command mode */
132 self->set_dtr_rts(self->dev, FALSE, TRUE);
133
134 switch (speed) {
135 case 9600:
136 default:
137 control[0] = GIRBIL_9600;
138 break;
139 case 19200:
140 control[0] = GIRBIL_19200;
141 break;
142 case 34800:
143 control[0] = GIRBIL_38400;
144 break;
145 case 57600:
146 control[0] = GIRBIL_57600;
147 break;
148 case 115200:
149 control[0] = GIRBIL_115200;
150 break;
151 }
152 control[1] = GIRBIL_LOAD;
153
154 /* Write control bytes */
155 self->write(self->dev, control, 2);
156 irda_task_next_state(task, IRDA_TASK_WAIT);
157 ret = msecs_to_jiffies(100);
158 break;
159 case IRDA_TASK_WAIT:
160 /* Go back to normal mode */
161 self->set_dtr_rts(self->dev, TRUE, TRUE);
162 irda_task_next_state(task, IRDA_TASK_DONE);
163 self->speed_task = NULL;
164 break;
165 default:
166 IRDA_ERROR("%s(), unknown state %d\n",
167 __FUNCTION__, task->state);
168 irda_task_next_state(task, IRDA_TASK_DONE);
169 self->speed_task = NULL;
170 ret = -1;
171 break;
172 }
173 return ret;
174}
175
176/*
177 * Function girbil_reset (driver)
178 *
179 * This function resets the girbil dongle.
180 *
181 * Algorithm:
182 * 0. set RTS, and wait at least 5 ms
183 * 1. clear RTS
184 */
185static int girbil_reset(struct irda_task *task)
186{
187 dongle_t *self = (dongle_t *) task->instance;
188 __u8 control = GIRBIL_TXEN | GIRBIL_RXEN;
189 int ret = 0;
190
191 self->reset_task = task;
192
193 switch (task->state) {
194 case IRDA_TASK_INIT:
195 /* Reset dongle */
196 self->set_dtr_rts(self->dev, TRUE, FALSE);
197 irda_task_next_state(task, IRDA_TASK_WAIT1);
198 /* Sleep at least 5 ms */
199 ret = msecs_to_jiffies(20);
200 break;
201 case IRDA_TASK_WAIT1:
202 /* Set DTR and clear RTS to enter command mode */
203 self->set_dtr_rts(self->dev, FALSE, TRUE);
204 irda_task_next_state(task, IRDA_TASK_WAIT2);
205 ret = msecs_to_jiffies(20);
206 break;
207 case IRDA_TASK_WAIT2:
208 /* Write control byte */
209 self->write(self->dev, &control, 1);
210 irda_task_next_state(task, IRDA_TASK_WAIT3);
211 ret = msecs_to_jiffies(20);
212 break;
213 case IRDA_TASK_WAIT3:
214 /* Go back to normal mode */
215 self->set_dtr_rts(self->dev, TRUE, TRUE);
216 irda_task_next_state(task, IRDA_TASK_DONE);
217 self->reset_task = NULL;
218 break;
219 default:
220 IRDA_ERROR("%s(), unknown state %d\n",
221 __FUNCTION__, task->state);
222 irda_task_next_state(task, IRDA_TASK_DONE);
223 self->reset_task = NULL;
224 ret = -1;
225 break;
226 }
227 return ret;
228}
229
230MODULE_AUTHOR("Dag Brattli <dagb@cs.uit.no>");
231MODULE_DESCRIPTION("Greenwich GIrBIL dongle driver");
232MODULE_LICENSE("GPL");
233MODULE_ALIAS("irda-dongle-4"); /* IRDA_GIRBIL_DONGLE */
234
235/*
236 * Function init_module (void)
237 *
238 * Initialize Girbil module
239 *
240 */
241module_init(girbil_init);
242
243/*
244 * Function cleanup_module (void)
245 *
246 * Cleanup Girbil module
247 *
248 */
249module_exit(girbil_cleanup);
250
diff --git a/drivers/net/irda/litelink.c b/drivers/net/irda/litelink.c
deleted file mode 100644
index 7db11431d0f4..000000000000
--- a/drivers/net/irda/litelink.c
+++ /dev/null
@@ -1,179 +0,0 @@
1/*********************************************************************
2 *
3 * Filename: litelink.c
4 * Version: 1.1
5 * Description: Driver for the Parallax LiteLink dongle
6 * Status: Stable
7 * Author: Dag Brattli <dagb@cs.uit.no>
8 * Created at: Fri May 7 12:50:33 1999
9 * Modified at: Fri Dec 17 09:14:23 1999
10 * Modified by: Dag Brattli <dagb@cs.uit.no>
11 *
12 * Copyright (c) 1999 Dag Brattli, All Rights Reserved.
13 *
14 * This program is free software; you can redistribute it and/or
15 * modify it under the terms of the GNU General Public License as
16 * published by the Free Software Foundation; either version 2 of
17 * the License, or (at your option) any later version.
18 *
19 * This program is distributed in the hope that it will be useful,
20 * but WITHOUT ANY WARRANTY; without even the implied warranty of
21 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
22 * GNU General Public License for more details.
23 *
24 * You should have received a copy of the GNU General Public License
25 * along with this program; if not, write to the Free Software
26 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
27 * MA 02111-1307 USA
28 *
29 ********************************************************************/
30
31#include <linux/module.h>
32#include <linux/delay.h>
33#include <linux/tty.h>
34#include <linux/init.h>
35
36#include <net/irda/irda.h>
37#include <net/irda/irda_device.h>
38
39#define MIN_DELAY 25 /* 15 us, but wait a little more to be sure */
40#define MAX_DELAY 10000 /* 1 ms */
41
42static void litelink_open(dongle_t *self, struct qos_info *qos);
43static void litelink_close(dongle_t *self);
44static int litelink_change_speed(struct irda_task *task);
45static int litelink_reset(struct irda_task *task);
46
47/* These are the baudrates supported */
48static __u32 baud_rates[] = { 115200, 57600, 38400, 19200, 9600 };
49
50static struct dongle_reg dongle = {
51 .type = IRDA_LITELINK_DONGLE,
52 .open = litelink_open,
53 .close = litelink_close,
54 .reset = litelink_reset,
55 .change_speed = litelink_change_speed,
56 .owner = THIS_MODULE,
57};
58
59static int __init litelink_init(void)
60{
61 return irda_device_register_dongle(&dongle);
62}
63
64static void __exit litelink_cleanup(void)
65{
66 irda_device_unregister_dongle(&dongle);
67}
68
69static void litelink_open(dongle_t *self, struct qos_info *qos)
70{
71 qos->baud_rate.bits &= IR_9600|IR_19200|IR_38400|IR_57600|IR_115200;
72 qos->min_turn_time.bits = 0x7f; /* Needs 0.01 ms */
73}
74
75static void litelink_close(dongle_t *self)
76{
77 /* Power off dongle */
78 self->set_dtr_rts(self->dev, FALSE, FALSE);
79}
80
81/*
82 * Function litelink_change_speed (task)
83 *
84 * Change speed of the Litelink dongle. To cycle through the available
85 * baud rates, pulse RTS low for a few ms.
86 */
87static int litelink_change_speed(struct irda_task *task)
88{
89 dongle_t *self = (dongle_t *) task->instance;
90 __u32 speed = (__u32) task->param;
91 int i;
92
93 /* Clear RTS to reset dongle */
94 self->set_dtr_rts(self->dev, TRUE, FALSE);
95
96 /* Sleep a minimum of 15 us */
97 udelay(MIN_DELAY);
98
99 /* Go back to normal mode */
100 self->set_dtr_rts(self->dev, TRUE, TRUE);
101
102 /* Sleep a minimum of 15 us */
103 udelay(MIN_DELAY);
104
105 /* Cycle through avaiable baudrates until we reach the correct one */
106 for (i=0; i<5 && baud_rates[i] != speed; i++) {
107 /* Set DTR, clear RTS */
108 self->set_dtr_rts(self->dev, FALSE, TRUE);
109
110 /* Sleep a minimum of 15 us */
111 udelay(MIN_DELAY);
112
113 /* Set DTR, Set RTS */
114 self->set_dtr_rts(self->dev, TRUE, TRUE);
115
116 /* Sleep a minimum of 15 us */
117 udelay(MIN_DELAY);
118 }
119 irda_task_next_state(task, IRDA_TASK_DONE);
120
121 return 0;
122}
123
124/*
125 * Function litelink_reset (task)
126 *
127 * Reset the Litelink type dongle.
128 *
129 */
130static int litelink_reset(struct irda_task *task)
131{
132 dongle_t *self = (dongle_t *) task->instance;
133
134 /* Power on dongle */
135 self->set_dtr_rts(self->dev, TRUE, TRUE);
136
137 /* Sleep a minimum of 15 us */
138 udelay(MIN_DELAY);
139
140 /* Clear RTS to reset dongle */
141 self->set_dtr_rts(self->dev, TRUE, FALSE);
142
143 /* Sleep a minimum of 15 us */
144 udelay(MIN_DELAY);
145
146 /* Go back to normal mode */
147 self->set_dtr_rts(self->dev, TRUE, TRUE);
148
149 /* Sleep a minimum of 15 us */
150 udelay(MIN_DELAY);
151
152 /* This dongles speed defaults to 115200 bps */
153 self->speed = 115200;
154
155 irda_task_next_state(task, IRDA_TASK_DONE);
156
157 return 0;
158}
159
160MODULE_AUTHOR("Dag Brattli <dagb@cs.uit.no>");
161MODULE_DESCRIPTION("Parallax Litelink dongle driver");
162MODULE_LICENSE("GPL");
163MODULE_ALIAS("irda-dongle-5"); /* IRDA_LITELINK_DONGLE */
164
165/*
166 * Function init_module (void)
167 *
168 * Initialize Litelink module
169 *
170 */
171module_init(litelink_init);
172
173/*
174 * Function cleanup_module (void)
175 *
176 * Cleanup Litelink module
177 *
178 */
179module_exit(litelink_cleanup);
diff --git a/drivers/net/irda/ma600.c b/drivers/net/irda/ma600.c
deleted file mode 100644
index f5e6836667fd..000000000000
--- a/drivers/net/irda/ma600.c
+++ /dev/null
@@ -1,354 +0,0 @@
1/*********************************************************************
2 *
3 * Filename: ma600.c
4 * Version: 0.1
5 * Description: Implementation of the MA600 dongle
6 * Status: Experimental.
7 * Author: Leung <95Etwl@alumni.ee.ust.hk> http://www.engsvr.ust/~eetwl95
8 * Created at: Sat Jun 10 20:02:35 2000
9 * Modified at:
10 * Modified by:
11 *
12 * Note: very thanks to Mr. Maru Wang <maru@mobileaction.com.tw> for providing
13 * information on the MA600 dongle
14 *
15 * Copyright (c) 2000 Leung, All Rights Reserved.
16 *
17 * This program is free software; you can redistribute it and/or
18 * modify it under the terms of the GNU General Public License as
19 * published by the Free Software Foundation; either version 2 of
20 * the License, or (at your option) any later version.
21 *
22 * This program is distributed in the hope that it will be useful,
23 * but WITHOUT ANY WARRANTY; without even the implied warranty of
24 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
25 * GNU General Public License for more details.
26 *
27 * You should have received a copy of the GNU General Public License
28 * along with this program; if not, write to the Free Software
29 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
30 * MA 02111-1307 USA
31 *
32 ********************************************************************/
33
34/* define this macro for release version */
35//#define NDEBUG
36
37#include <linux/module.h>
38#include <linux/delay.h>
39#include <linux/tty.h>
40#include <linux/init.h>
41
42#include <net/irda/irda.h>
43#include <net/irda/irda_device.h>
44
45#ifndef NDEBUG
46 #undef IRDA_DEBUG
47 #define IRDA_DEBUG(n, args...) (printk(KERN_DEBUG args))
48
49 #undef ASSERT
50 #define ASSERT(expr, func) \
51 if(!(expr)) { \
52 printk( "Assertion failed! %s,%s,%s,line=%d\n",\
53 #expr,__FILE__,__FUNCTION__,__LINE__); \
54 func}
55#endif
56
57/* convert hex value to ascii hex */
58static const char hexTbl[] = "0123456789ABCDEF";
59
60
61static void ma600_open(dongle_t *self, struct qos_info *qos);
62static void ma600_close(dongle_t *self);
63static int ma600_change_speed(struct irda_task *task);
64static int ma600_reset(struct irda_task *task);
65
66/* control byte for MA600 */
67#define MA600_9600 0x00
68#define MA600_19200 0x01
69#define MA600_38400 0x02
70#define MA600_57600 0x03
71#define MA600_115200 0x04
72#define MA600_DEV_ID1 0x05
73#define MA600_DEV_ID2 0x06
74#define MA600_2400 0x08
75
76static struct dongle_reg dongle = {
77 .type = IRDA_MA600_DONGLE,
78 .open = ma600_open,
79 .close = ma600_close,
80 .reset = ma600_reset,
81 .change_speed = ma600_change_speed,
82 .owner = THIS_MODULE,
83};
84
85static int __init ma600_init(void)
86{
87 IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
88 return irda_device_register_dongle(&dongle);
89}
90
91static void __exit ma600_cleanup(void)
92{
93 IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
94 irda_device_unregister_dongle(&dongle);
95}
96
97/*
98 Power on:
99 (0) Clear RTS and DTR for 1 second
100 (1) Set RTS and DTR for 1 second
101 (2) 9600 bps now
102 Note: assume RTS, DTR are clear before
103*/
104static void ma600_open(dongle_t *self, struct qos_info *qos)
105{
106 IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
107
108 qos->baud_rate.bits &= IR_2400|IR_9600|IR_19200|IR_38400
109 |IR_57600|IR_115200;
110 qos->min_turn_time.bits = 0x01; /* Needs at least 1 ms */
111 irda_qos_bits_to_value(qos);
112
113 //self->set_dtr_rts(self->dev, FALSE, FALSE);
114 // should wait 1 second
115
116 self->set_dtr_rts(self->dev, TRUE, TRUE);
117 // should wait 1 second
118}
119
120static void ma600_close(dongle_t *self)
121{
122 IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
123
124 /* Power off dongle */
125 self->set_dtr_rts(self->dev, FALSE, FALSE);
126}
127
128static __u8 get_control_byte(__u32 speed)
129{
130 __u8 byte;
131
132 switch (speed) {
133 default:
134 case 115200:
135 byte = MA600_115200;
136 break;
137 case 57600:
138 byte = MA600_57600;
139 break;
140 case 38400:
141 byte = MA600_38400;
142 break;
143 case 19200:
144 byte = MA600_19200;
145 break;
146 case 9600:
147 byte = MA600_9600;
148 break;
149 case 2400:
150 byte = MA600_2400;
151 break;
152 }
153
154 return byte;
155}
156
157/*
158 * Function ma600_change_speed (dev, state, speed)
159 *
160 * Set the speed for the MA600 type dongle. Warning, this
161 * function must be called with a process context!
162 *
163 * Algorithm
164 * 1. Reset
165 * 2. clear RTS, set DTR and wait for 1ms
166 * 3. send Control Byte to the MA600 through TXD to set new baud rate
167 * wait until the stop bit of Control Byte is sent (for 9600 baud rate,
168 * it takes about 10 msec)
169 * 4. set RTS, set DTR (return to NORMAL Operation)
170 * 5. wait at least 10 ms, new setting (baud rate, etc) takes effect here
171 * after
172 */
173static int ma600_change_speed(struct irda_task *task)
174{
175 dongle_t *self = (dongle_t *) task->instance;
176 __u32 speed = (__u32) task->param;
177 static __u8 byte;
178 __u8 byte_echo;
179 int ret = 0;
180
181 IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
182
183 ASSERT(task != NULL, return -1;);
184
185 if (self->speed_task && self->speed_task != task) {
186 IRDA_DEBUG(0, "%s(), busy!\n", __FUNCTION__);
187 return msecs_to_jiffies(10);
188 } else {
189 self->speed_task = task;
190 }
191
192 switch (task->state) {
193 case IRDA_TASK_INIT:
194 case IRDA_TASK_CHILD_INIT:
195 /*
196 * Need to reset the dongle and go to 9600 bps before
197 * programming
198 */
199 if (irda_task_execute(self, ma600_reset, NULL, task,
200 (void *) speed)) {
201 /* Dongle need more time to reset */
202 irda_task_next_state(task, IRDA_TASK_CHILD_WAIT);
203
204 /* give 1 second to finish */
205 ret = msecs_to_jiffies(1000);
206 } else {
207 irda_task_next_state(task, IRDA_TASK_CHILD_DONE);
208 }
209 break;
210
211 case IRDA_TASK_CHILD_WAIT:
212 IRDA_WARNING("%s(), resetting dongle timed out!\n",
213 __FUNCTION__);
214 ret = -1;
215 break;
216
217 case IRDA_TASK_CHILD_DONE:
218 /* Set DTR, Clear RTS */
219 self->set_dtr_rts(self->dev, TRUE, FALSE);
220
221 ret = msecs_to_jiffies(1); /* Sleep 1 ms */
222 irda_task_next_state(task, IRDA_TASK_WAIT);
223 break;
224
225 case IRDA_TASK_WAIT:
226 speed = (__u32) task->param;
227 byte = get_control_byte(speed);
228
229 /* Write control byte */
230 self->write(self->dev, &byte, sizeof(byte));
231
232 irda_task_next_state(task, IRDA_TASK_WAIT1);
233
234 /* Wait at least 10 ms */
235 ret = msecs_to_jiffies(15);
236 break;
237
238 case IRDA_TASK_WAIT1:
239 /* Read control byte echo */
240 self->read(self->dev, &byte_echo, sizeof(byte_echo));
241
242 if(byte != byte_echo) {
243 /* if control byte != echo, I don't know what to do */
244 printk(KERN_WARNING "%s() control byte written != read!\n", __FUNCTION__);
245 printk(KERN_WARNING "control byte = 0x%c%c\n",
246 hexTbl[(byte>>4)&0x0f], hexTbl[byte&0x0f]);
247 printk(KERN_WARNING "byte echo = 0x%c%c\n",
248 hexTbl[(byte_echo>>4) & 0x0f],
249 hexTbl[byte_echo & 0x0f]);
250 #ifndef NDEBUG
251 } else {
252 IRDA_DEBUG(2, "%s() control byte write read OK\n", __FUNCTION__);
253 #endif
254 }
255
256 /* Set DTR, Set RTS */
257 self->set_dtr_rts(self->dev, TRUE, TRUE);
258
259 irda_task_next_state(task, IRDA_TASK_WAIT2);
260
261 /* Wait at least 10 ms */
262 ret = msecs_to_jiffies(10);
263 break;
264
265 case IRDA_TASK_WAIT2:
266 irda_task_next_state(task, IRDA_TASK_DONE);
267 self->speed_task = NULL;
268 break;
269
270 default:
271 IRDA_ERROR("%s(), unknown state %d\n",
272 __FUNCTION__, task->state);
273 irda_task_next_state(task, IRDA_TASK_DONE);
274 self->speed_task = NULL;
275 ret = -1;
276 break;
277 }
278 return ret;
279}
280
281/*
282 * Function ma600_reset (driver)
283 *
284 * This function resets the ma600 dongle. Warning, this function
285 * must be called with a process context!!
286 *
287 * Algorithm:
288 * 0. DTR=0, RTS=1 and wait 10 ms
289 * 1. DTR=1, RTS=1 and wait 10 ms
290 * 2. 9600 bps now
291 */
292int ma600_reset(struct irda_task *task)
293{
294 dongle_t *self = (dongle_t *) task->instance;
295 int ret = 0;
296
297 IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
298
299 ASSERT(task != NULL, return -1;);
300
301 if (self->reset_task && self->reset_task != task) {
302 IRDA_DEBUG(0, "%s(), busy!\n", __FUNCTION__);
303 return msecs_to_jiffies(10);
304 } else
305 self->reset_task = task;
306
307 switch (task->state) {
308 case IRDA_TASK_INIT:
309 /* Clear DTR and Set RTS */
310 self->set_dtr_rts(self->dev, FALSE, TRUE);
311 irda_task_next_state(task, IRDA_TASK_WAIT1);
312 ret = msecs_to_jiffies(10); /* Sleep 10 ms */
313 break;
314 case IRDA_TASK_WAIT1:
315 /* Set DTR and RTS */
316 self->set_dtr_rts(self->dev, TRUE, TRUE);
317 irda_task_next_state(task, IRDA_TASK_WAIT2);
318 ret = msecs_to_jiffies(10); /* Sleep 10 ms */
319 break;
320 case IRDA_TASK_WAIT2:
321 irda_task_next_state(task, IRDA_TASK_DONE);
322 self->reset_task = NULL;
323 break;
324 default:
325 IRDA_ERROR("%s(), unknown state %d\n",
326 __FUNCTION__, task->state);
327 irda_task_next_state(task, IRDA_TASK_DONE);
328 self->reset_task = NULL;
329 ret = -1;
330 }
331 return ret;
332}
333
334MODULE_AUTHOR("Leung <95Etwl@alumni.ee.ust.hk> http://www.engsvr.ust/~eetwl95");
335MODULE_DESCRIPTION("MA600 dongle driver version 0.1");
336MODULE_LICENSE("GPL");
337MODULE_ALIAS("irda-dongle-11"); /* IRDA_MA600_DONGLE */
338
339/*
340 * Function init_module (void)
341 *
342 * Initialize MA600 module
343 *
344 */
345module_init(ma600_init);
346
347/*
348 * Function cleanup_module (void)
349 *
350 * Cleanup MA600 module
351 *
352 */
353module_exit(ma600_cleanup);
354
diff --git a/drivers/net/irda/mcp2120.c b/drivers/net/irda/mcp2120.c
deleted file mode 100644
index 5e6199eeef4f..000000000000
--- a/drivers/net/irda/mcp2120.c
+++ /dev/null
@@ -1,240 +0,0 @@
1/*********************************************************************
2 *
3 *
4 * Filename: mcp2120.c
5 * Version: 1.0
6 * Description: Implementation for the MCP2120 (Microchip)
7 * Status: Experimental.
8 * Author: Felix Tang (tangf@eyetap.org)
9 * Created at: Sun Mar 31 19:32:12 EST 2002
10 * Based on code by: Dag Brattli <dagb@cs.uit.no>
11 *
12 * Copyright (c) 2002 Felix Tang, All Rights Reserved.
13 *
14 * This program is free software; you can redistribute it and/or
15 * modify it under the terms of the GNU General Public License as
16 * published by the Free Software Foundation; either version 2 of
17 * the License, or (at your option) any later version.
18 *
19 ********************************************************************/
20
21#include <linux/module.h>
22#include <linux/delay.h>
23#include <linux/tty.h>
24#include <linux/init.h>
25
26#include <net/irda/irda.h>
27#include <net/irda/irda_device.h>
28
29static int mcp2120_reset(struct irda_task *task);
30static void mcp2120_open(dongle_t *self, struct qos_info *qos);
31static void mcp2120_close(dongle_t *self);
32static int mcp2120_change_speed(struct irda_task *task);
33
34#define MCP2120_9600 0x87
35#define MCP2120_19200 0x8B
36#define MCP2120_38400 0x85
37#define MCP2120_57600 0x83
38#define MCP2120_115200 0x81
39
40#define MCP2120_COMMIT 0x11
41
42static struct dongle_reg dongle = {
43 .type = IRDA_MCP2120_DONGLE,
44 .open = mcp2120_open,
45 .close = mcp2120_close,
46 .reset = mcp2120_reset,
47 .change_speed = mcp2120_change_speed,
48 .owner = THIS_MODULE,
49};
50
51static int __init mcp2120_init(void)
52{
53 return irda_device_register_dongle(&dongle);
54}
55
56static void __exit mcp2120_cleanup(void)
57{
58 irda_device_unregister_dongle(&dongle);
59}
60
61static void mcp2120_open(dongle_t *self, struct qos_info *qos)
62{
63 qos->baud_rate.bits &= IR_9600|IR_19200|IR_38400|IR_57600|IR_115200;
64 qos->min_turn_time.bits = 0x01;
65}
66
67static void mcp2120_close(dongle_t *self)
68{
69 /* Power off dongle */
70 /* reset and inhibit mcp2120 */
71 self->set_dtr_rts(self->dev, TRUE, TRUE);
72 //self->set_dtr_rts(self->dev, FALSE, FALSE);
73}
74
75/*
76 * Function mcp2120_change_speed (dev, speed)
77 *
78 * Set the speed for the MCP2120.
79 *
80 */
81static int mcp2120_change_speed(struct irda_task *task)
82{
83 dongle_t *self = (dongle_t *) task->instance;
84 __u32 speed = (__u32) task->param;
85 __u8 control[2];
86 int ret = 0;
87
88 self->speed_task = task;
89
90 switch (task->state) {
91 case IRDA_TASK_INIT:
92 /* Need to reset the dongle and go to 9600 bps before
93 programming */
94 //printk("Dmcp2120_change_speed irda_task_init\n");
95 if (irda_task_execute(self, mcp2120_reset, NULL, task,
96 (void *) speed))
97 {
98 /* Dongle need more time to reset */
99 irda_task_next_state(task, IRDA_TASK_CHILD_WAIT);
100
101 /* Give reset 1 sec to finish */
102 ret = msecs_to_jiffies(1000);
103 }
104 break;
105 case IRDA_TASK_CHILD_WAIT:
106 IRDA_WARNING("%s(), resetting dongle timed out!\n",
107 __FUNCTION__);
108 ret = -1;
109 break;
110 case IRDA_TASK_CHILD_DONE:
111 /* Set DTR to enter command mode */
112 self->set_dtr_rts(self->dev, TRUE, FALSE);
113 udelay(500);
114
115 switch (speed) {
116 case 9600:
117 default:
118 control[0] = MCP2120_9600;
119 //printk("mcp2120 9600\n");
120 break;
121 case 19200:
122 control[0] = MCP2120_19200;
123 //printk("mcp2120 19200\n");
124 break;
125 case 34800:
126 control[0] = MCP2120_38400;
127 //printk("mcp2120 38400\n");
128 break;
129 case 57600:
130 control[0] = MCP2120_57600;
131 //printk("mcp2120 57600\n");
132 break;
133 case 115200:
134 control[0] = MCP2120_115200;
135 //printk("mcp2120 115200\n");
136 break;
137 }
138 control[1] = MCP2120_COMMIT;
139
140 /* Write control bytes */
141 self->write(self->dev, control, 2);
142
143 irda_task_next_state(task, IRDA_TASK_WAIT);
144 ret = msecs_to_jiffies(100);
145 //printk("mcp2120_change_speed irda_child_done\n");
146 break;
147 case IRDA_TASK_WAIT:
148 /* Go back to normal mode */
149 self->set_dtr_rts(self->dev, FALSE, FALSE);
150 irda_task_next_state(task, IRDA_TASK_DONE);
151 self->speed_task = NULL;
152 //printk("mcp2120_change_speed irda_task_wait\n");
153 break;
154 default:
155 IRDA_ERROR("%s(), unknown state %d\n",
156 __FUNCTION__, task->state);
157 irda_task_next_state(task, IRDA_TASK_DONE);
158 self->speed_task = NULL;
159 ret = -1;
160 break;
161 }
162 return ret;
163}
164
165/*
166 * Function mcp2120_reset (driver)
167 *
168 * This function resets the mcp2120 dongle.
169 *
170 * Info: -set RTS to reset mcp2120
171 * -set DTR to set mcp2120 software command mode
172 * -mcp2120 defaults to 9600 baud after reset
173 *
174 * Algorithm:
175 * 0. Set RTS to reset mcp2120.
176 * 1. Clear RTS and wait for device reset timer of 30 ms (max).
177 *
178 */
179
180
181static int mcp2120_reset(struct irda_task *task)
182{
183 dongle_t *self = (dongle_t *) task->instance;
184 int ret = 0;
185
186 self->reset_task = task;
187
188 switch (task->state) {
189 case IRDA_TASK_INIT:
190 //printk("mcp2120_reset irda_task_init\n");
191 /* Reset dongle by setting RTS*/
192 self->set_dtr_rts(self->dev, TRUE, TRUE);
193 irda_task_next_state(task, IRDA_TASK_WAIT1);
194 ret = msecs_to_jiffies(50);
195 break;
196 case IRDA_TASK_WAIT1:
197 //printk("mcp2120_reset irda_task_wait1\n");
198 /* clear RTS and wait for at least 30 ms. */
199 self->set_dtr_rts(self->dev, FALSE, FALSE);
200 irda_task_next_state(task, IRDA_TASK_WAIT2);
201 ret = msecs_to_jiffies(50);
202 break;
203 case IRDA_TASK_WAIT2:
204 //printk("mcp2120_reset irda_task_wait2\n");
205 /* Go back to normal mode */
206 self->set_dtr_rts(self->dev, FALSE, FALSE);
207 irda_task_next_state(task, IRDA_TASK_DONE);
208 self->reset_task = NULL;
209 break;
210 default:
211 IRDA_ERROR("%s(), unknown state %d\n",
212 __FUNCTION__, task->state);
213 irda_task_next_state(task, IRDA_TASK_DONE);
214 self->reset_task = NULL;
215 ret = -1;
216 break;
217 }
218 return ret;
219}
220
221MODULE_AUTHOR("Felix Tang <tangf@eyetap.org>");
222MODULE_DESCRIPTION("Microchip MCP2120");
223MODULE_LICENSE("GPL");
224MODULE_ALIAS("irda-dongle-9"); /* IRDA_MCP2120_DONGLE */
225
226/*
227 * Function init_module (void)
228 *
229 * Initialize MCP2120 module
230 *
231 */
232module_init(mcp2120_init);
233
234/*
235 * Function cleanup_module (void)
236 *
237 * Cleanup MCP2120 module
238 *
239 */
240module_exit(mcp2120_cleanup);
diff --git a/drivers/net/irda/old_belkin.c b/drivers/net/irda/old_belkin.c
deleted file mode 100644
index 26f81fd28371..000000000000
--- a/drivers/net/irda/old_belkin.c
+++ /dev/null
@@ -1,164 +0,0 @@
1/*********************************************************************
2 *
3 * Filename: old_belkin.c
4 * Version: 1.1
5 * Description: Driver for the Belkin (old) SmartBeam dongle
6 * Status: Experimental...
7 * Author: Jean Tourrilhes <jt@hpl.hp.com>
8 * Created at: 22/11/99
9 * Modified at: Fri Dec 17 09:13:32 1999
10 * Modified by: Dag Brattli <dagb@cs.uit.no>
11 *
12 * Copyright (c) 1999 Jean Tourrilhes, All Rights Reserved.
13 *
14 * This program is free software; you can redistribute it and/or
15 * modify it under the terms of the GNU General Public License as
16 * published by the Free Software Foundation; either version 2 of
17 * the License, or (at your option) any later version.
18 *
19 * This program is distributed in the hope that it will be useful,
20 * but WITHOUT ANY WARRANTY; without even the implied warranty of
21 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
22 * GNU General Public License for more details.
23 *
24 * You should have received a copy of the GNU General Public License
25 * along with this program; if not, write to the Free Software
26 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
27 * MA 02111-1307 USA
28 *
29 ********************************************************************/
30
31#include <linux/module.h>
32#include <linux/delay.h>
33#include <linux/tty.h>
34#include <linux/init.h>
35
36#include <net/irda/irda.h>
37#include <net/irda/irda_device.h>
38
39/*
40 * Belkin is selling a dongle called the SmartBeam.
41 * In fact, there is two hardware version of this dongle, of course with
42 * the same name and looking the exactly same (grrr...).
43 * I guess that I've got the old one, because inside I don't have
44 * a jumper for IrDA/ASK...
45 *
46 * As far as I can make it from info on their web site, the old dongle
47 * support only 9600 b/s, which make our life much simpler as far as
48 * the driver is concerned, but you might not like it very much ;-)
49 * The new SmartBeam does 115 kb/s, and I've not tested it...
50 *
51 * Belkin claim that the correct driver for the old dongle (in Windows)
52 * is the generic Parallax 9500a driver, but the Linux LiteLink driver
53 * fails for me (probably because Linux-IrDA doesn't rate fallback),
54 * so I created this really dumb driver...
55 *
56 * In fact, this driver doesn't do much. The only thing it does is to
57 * prevent Linux-IrDA to use any other speed than 9600 b/s ;-) This
58 * driver is called "old_belkin" so that when the new SmartBeam is supported
59 * its driver can be called "belkin" instead of "new_belkin".
60 *
61 * Note : this driver was written without any info/help from Belkin,
62 * so a lot of info here might be totally wrong. Blame me ;-)
63 */
64
65/* Let's guess */
66#define MIN_DELAY 25 /* 15 us, but wait a little more to be sure */
67
68static void old_belkin_open(dongle_t *self, struct qos_info *qos);
69static void old_belkin_close(dongle_t *self);
70static int old_belkin_change_speed(struct irda_task *task);
71static int old_belkin_reset(struct irda_task *task);
72
73/* These are the baudrates supported */
74/* static __u32 baud_rates[] = { 9600 }; */
75
76static struct dongle_reg dongle = {
77 .type = IRDA_OLD_BELKIN_DONGLE,
78 .open = old_belkin_open,
79 .close = old_belkin_close,
80 .reset = old_belkin_reset,
81 .change_speed = old_belkin_change_speed,
82 .owner = THIS_MODULE,
83};
84
85static int __init old_belkin_init(void)
86{
87 return irda_device_register_dongle(&dongle);
88}
89
90static void __exit old_belkin_cleanup(void)
91{
92 irda_device_unregister_dongle(&dongle);
93}
94
95static void old_belkin_open(dongle_t *self, struct qos_info *qos)
96{
97 /* Not too fast, please... */
98 qos->baud_rate.bits &= IR_9600;
99 /* Needs at least 10 ms (totally wild guess, can do probably better) */
100 qos->min_turn_time.bits = 0x01;
101}
102
103static void old_belkin_close(dongle_t *self)
104{
105 /* Power off dongle */
106 self->set_dtr_rts(self->dev, FALSE, FALSE);
107}
108
109/*
110 * Function old_belkin_change_speed (task)
111 *
112 * With only one speed available, not much to do...
113 */
114static int old_belkin_change_speed(struct irda_task *task)
115{
116 irda_task_next_state(task, IRDA_TASK_DONE);
117
118 return 0;
119}
120
121/*
122 * Function old_belkin_reset (task)
123 *
124 * Reset the Old-Belkin type dongle.
125 *
126 */
127static int old_belkin_reset(struct irda_task *task)
128{
129 dongle_t *self = (dongle_t *) task->instance;
130
131 /* Power on dongle */
132 self->set_dtr_rts(self->dev, TRUE, TRUE);
133
134 /* Sleep a minimum of 15 us */
135 udelay(MIN_DELAY);
136
137 /* This dongles speed "defaults" to 9600 bps ;-) */
138 self->speed = 9600;
139
140 irda_task_next_state(task, IRDA_TASK_DONE);
141
142 return 0;
143}
144
145MODULE_AUTHOR("Jean Tourrilhes <jt@hpl.hp.com>");
146MODULE_DESCRIPTION("Belkin (old) SmartBeam dongle driver");
147MODULE_LICENSE("GPL");
148MODULE_ALIAS("irda-dongle-7"); /* IRDA_OLD_BELKIN_DONGLE */
149
150/*
151 * Function init_module (void)
152 *
153 * Initialize Old-Belkin module
154 *
155 */
156module_init(old_belkin_init);
157
158/*
159 * Function cleanup_module (void)
160 *
161 * Cleanup Old-Belkin module
162 *
163 */
164module_exit(old_belkin_cleanup);
diff --git a/drivers/net/irda/tekram.c b/drivers/net/irda/tekram.c
deleted file mode 100644
index 9bfd2441adbf..000000000000
--- a/drivers/net/irda/tekram.c
+++ /dev/null
@@ -1,282 +0,0 @@
1/*********************************************************************
2 *
3 * Filename: tekram.c
4 * Version: 1.2
5 * Description: Implementation of the Tekram IrMate IR-210B dongle
6 * Status: Experimental.
7 * Author: Dag Brattli <dagb@cs.uit.no>
8 * Created at: Wed Oct 21 20:02:35 1998
9 * Modified at: Fri Dec 17 09:13:09 1999
10 * Modified by: Dag Brattli <dagb@cs.uit.no>
11 *
12 * Copyright (c) 1998-1999 Dag Brattli, All Rights Reserved.
13 *
14 * This program is free software; you can redistribute it and/or
15 * modify it under the terms of the GNU General Public License as
16 * published by the Free Software Foundation; either version 2 of
17 * the License, or (at your option) any later version.
18 *
19 * Neither Dag Brattli nor University of Tromsø admit liability nor
20 * provide warranty for any of this software. This material is
21 * provided "AS-IS" and at no charge.
22 *
23 ********************************************************************/
24
25#include <linux/module.h>
26#include <linux/delay.h>
27#include <linux/tty.h>
28#include <linux/init.h>
29
30#include <net/irda/irda.h>
31#include <net/irda/irda_device.h>
32
33static void tekram_open(dongle_t *self, struct qos_info *qos);
34static void tekram_close(dongle_t *self);
35static int tekram_change_speed(struct irda_task *task);
36static int tekram_reset(struct irda_task *task);
37
38#define TEKRAM_115200 0x00
39#define TEKRAM_57600 0x01
40#define TEKRAM_38400 0x02
41#define TEKRAM_19200 0x03
42#define TEKRAM_9600 0x04
43
44#define TEKRAM_PW 0x10 /* Pulse select bit */
45
46static struct dongle_reg dongle = {
47 .type = IRDA_TEKRAM_DONGLE,
48 .open = tekram_open,
49 .close = tekram_close,
50 .reset = tekram_reset,
51 .change_speed = tekram_change_speed,
52 .owner = THIS_MODULE,
53};
54
55static int __init tekram_init(void)
56{
57 return irda_device_register_dongle(&dongle);
58}
59
60static void __exit tekram_cleanup(void)
61{
62 irda_device_unregister_dongle(&dongle);
63}
64
65static void tekram_open(dongle_t *self, struct qos_info *qos)
66{
67 IRDA_DEBUG(2, "%s()\n", __FUNCTION__ );
68
69 qos->baud_rate.bits &= IR_9600|IR_19200|IR_38400|IR_57600|IR_115200;
70 qos->min_turn_time.bits = 0x01; /* Needs at least 10 ms */
71 irda_qos_bits_to_value(qos);
72}
73
74static void tekram_close(dongle_t *self)
75{
76 IRDA_DEBUG(2, "%s()\n", __FUNCTION__ );
77
78 /* Power off dongle */
79 self->set_dtr_rts(self->dev, FALSE, FALSE);
80
81 if (self->reset_task)
82 irda_task_delete(self->reset_task);
83 if (self->speed_task)
84 irda_task_delete(self->speed_task);
85}
86
87/*
88 * Function tekram_change_speed (dev, state, speed)
89 *
90 * Set the speed for the Tekram IRMate 210 type dongle. Warning, this
91 * function must be called with a process context!
92 *
93 * Algorithm
94 * 1. clear DTR
95 * 2. set RTS, and wait at least 7 us
96 * 3. send Control Byte to the IR-210 through TXD to set new baud rate
97 * wait until the stop bit of Control Byte is sent (for 9600 baud rate,
98 * it takes about 100 msec)
99 * 5. clear RTS (return to NORMAL Operation)
100 * 6. wait at least 50 us, new setting (baud rate, etc) takes effect here
101 * after
102 */
103static int tekram_change_speed(struct irda_task *task)
104{
105 dongle_t *self = (dongle_t *) task->instance;
106 __u32 speed = (__u32) task->param;
107 __u8 byte;
108 int ret = 0;
109
110 IRDA_DEBUG(2, "%s()\n", __FUNCTION__ );
111
112 IRDA_ASSERT(task != NULL, return -1;);
113
114 if (self->speed_task && self->speed_task != task) {
115 IRDA_DEBUG(0, "%s(), busy!\n", __FUNCTION__ );
116 return msecs_to_jiffies(10);
117 } else
118 self->speed_task = task;
119
120 switch (speed) {
121 default:
122 case 9600:
123 byte = TEKRAM_PW|TEKRAM_9600;
124 break;
125 case 19200:
126 byte = TEKRAM_PW|TEKRAM_19200;
127 break;
128 case 38400:
129 byte = TEKRAM_PW|TEKRAM_38400;
130 break;
131 case 57600:
132 byte = TEKRAM_PW|TEKRAM_57600;
133 break;
134 case 115200:
135 byte = TEKRAM_115200;
136 break;
137 }
138
139 switch (task->state) {
140 case IRDA_TASK_INIT:
141 case IRDA_TASK_CHILD_INIT:
142 /*
143 * Need to reset the dongle and go to 9600 bps before
144 * programming
145 */
146 if (irda_task_execute(self, tekram_reset, NULL, task,
147 (void *) speed))
148 {
149 /* Dongle need more time to reset */
150 irda_task_next_state(task, IRDA_TASK_CHILD_WAIT);
151
152 /* Give reset 1 sec to finish */
153 ret = msecs_to_jiffies(1000);
154 } else
155 irda_task_next_state(task, IRDA_TASK_CHILD_DONE);
156 break;
157 case IRDA_TASK_CHILD_WAIT:
158 IRDA_WARNING("%s(), resetting dongle timed out!\n",
159 __FUNCTION__);
160 ret = -1;
161 break;
162 case IRDA_TASK_CHILD_DONE:
163 /* Set DTR, Clear RTS */
164 self->set_dtr_rts(self->dev, TRUE, FALSE);
165
166 /* Wait at least 7us */
167 udelay(14);
168
169 /* Write control byte */
170 self->write(self->dev, &byte, 1);
171
172 irda_task_next_state(task, IRDA_TASK_WAIT);
173
174 /* Wait at least 100 ms */
175 ret = msecs_to_jiffies(150);
176 break;
177 case IRDA_TASK_WAIT:
178 /* Set DTR, Set RTS */
179 self->set_dtr_rts(self->dev, TRUE, TRUE);
180
181 irda_task_next_state(task, IRDA_TASK_DONE);
182 self->speed_task = NULL;
183 break;
184 default:
185 IRDA_ERROR("%s(), unknown state %d\n",
186 __FUNCTION__, task->state);
187 irda_task_next_state(task, IRDA_TASK_DONE);
188 self->speed_task = NULL;
189 ret = -1;
190 break;
191 }
192 return ret;
193}
194
195/*
196 * Function tekram_reset (driver)
197 *
198 * This function resets the tekram dongle. Warning, this function
199 * must be called with a process context!!
200 *
201 * Algorithm:
202 * 0. Clear RTS and DTR, and wait 50 ms (power off the IR-210 )
203 * 1. clear RTS
204 * 2. set DTR, and wait at least 1 ms
205 * 3. clear DTR to SPACE state, wait at least 50 us for further
206 * operation
207 */
208int tekram_reset(struct irda_task *task)
209{
210 dongle_t *self = (dongle_t *) task->instance;
211 int ret = 0;
212
213 IRDA_DEBUG(2, "%s()\n", __FUNCTION__ );
214
215 IRDA_ASSERT(task != NULL, return -1;);
216
217 if (self->reset_task && self->reset_task != task) {
218 IRDA_DEBUG(0, "%s(), busy!\n", __FUNCTION__ );
219 return msecs_to_jiffies(10);
220 } else
221 self->reset_task = task;
222
223 /* Power off dongle */
224 //self->set_dtr_rts(self->dev, FALSE, FALSE);
225 self->set_dtr_rts(self->dev, TRUE, TRUE);
226
227 switch (task->state) {
228 case IRDA_TASK_INIT:
229 irda_task_next_state(task, IRDA_TASK_WAIT1);
230
231 /* Sleep 50 ms */
232 ret = msecs_to_jiffies(50);
233 break;
234 case IRDA_TASK_WAIT1:
235 /* Clear DTR, Set RTS */
236 self->set_dtr_rts(self->dev, FALSE, TRUE);
237
238 irda_task_next_state(task, IRDA_TASK_WAIT2);
239
240 /* Should sleep 1 ms */
241 ret = msecs_to_jiffies(1);
242 break;
243 case IRDA_TASK_WAIT2:
244 /* Set DTR, Set RTS */
245 self->set_dtr_rts(self->dev, TRUE, TRUE);
246
247 /* Wait at least 50 us */
248 udelay(75);
249
250 irda_task_next_state(task, IRDA_TASK_DONE);
251 self->reset_task = NULL;
252 break;
253 default:
254 IRDA_ERROR("%s(), unknown state %d\n",
255 __FUNCTION__, task->state);
256 irda_task_next_state(task, IRDA_TASK_DONE);
257 self->reset_task = NULL;
258 ret = -1;
259 }
260 return ret;
261}
262
263MODULE_AUTHOR("Dag Brattli <dagb@cs.uit.no>");
264MODULE_DESCRIPTION("Tekram IrMate IR-210B dongle driver");
265MODULE_LICENSE("GPL");
266MODULE_ALIAS("irda-dongle-0"); /* IRDA_TEKRAM_DONGLE */
267
268/*
269 * Function init_module (void)
270 *
271 * Initialize Tekram module
272 *
273 */
274module_init(tekram_init);
275
276/*
277 * Function cleanup_module (void)
278 *
279 * Cleanup Tekram module
280 *
281 */
282module_exit(tekram_cleanup);
generated by cgit v1.2.2 (git 2.25.0) at 2024-12-15 18:41:26 -0500