aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--arch/arm/configs/viper_defconfig1678
-rw-r--r--arch/arm/mach-pxa/Kconfig22
-rw-r--r--arch/arm/mach-pxa/Makefile13
-rw-r--r--arch/arm/mach-pxa/include/mach/entry-macro.S4
-rw-r--r--arch/arm/mach-pxa/include/mach/irqs.h19
-rw-r--r--arch/arm/mach-pxa/include/mach/viper.h96
-rw-r--r--arch/arm/mach-pxa/irq.c2
-rw-r--r--arch/arm/mach-pxa/viper.c951
-rw-r--r--drivers/net/smc91x.c9
-rw-r--r--drivers/net/smc91x.h13
-rw-r--r--drivers/pcmcia/Kconfig3
-rw-r--r--drivers/pcmcia/Makefile2
-rw-r--r--drivers/pcmcia/pxa2xx_base.c44
-rw-r--r--drivers/pcmcia/pxa2xx_viper.c179
-rw-r--r--include/linux/smc91x.h11
15 files changed, 2994 insertions, 52 deletions
diff --git a/arch/arm/configs/viper_defconfig b/arch/arm/configs/viper_defconfig
new file mode 100644
index 000000000000..d01fecb8673e
--- /dev/null
+++ b/arch/arm/configs/viper_defconfig
@@ -0,0 +1,1678 @@
1#
2# Automatically generated make config: don't edit
3# Linux kernel version: 2.6.27-rc4
4# Thu Aug 21 17:12:07 2008
5#
6CONFIG_ARM=y
7CONFIG_HAVE_PWM=y
8CONFIG_SYS_SUPPORTS_APM_EMULATION=y
9CONFIG_GENERIC_GPIO=y
10CONFIG_GENERIC_TIME=y
11CONFIG_GENERIC_CLOCKEVENTS=y
12CONFIG_MMU=y
13# CONFIG_NO_IOPORT is not set
14CONFIG_GENERIC_HARDIRQS=y
15CONFIG_STACKTRACE_SUPPORT=y
16CONFIG_HAVE_LATENCYTOP_SUPPORT=y
17CONFIG_LOCKDEP_SUPPORT=y
18CONFIG_TRACE_IRQFLAGS_SUPPORT=y
19CONFIG_HARDIRQS_SW_RESEND=y
20CONFIG_GENERIC_IRQ_PROBE=y
21CONFIG_RWSEM_GENERIC_SPINLOCK=y
22# CONFIG_ARCH_HAS_ILOG2_U32 is not set
23# CONFIG_ARCH_HAS_ILOG2_U64 is not set
24CONFIG_GENERIC_HWEIGHT=y
25CONFIG_GENERIC_CALIBRATE_DELAY=y
26CONFIG_ARCH_SUPPORTS_AOUT=y
27CONFIG_ZONE_DMA=y
28CONFIG_ARCH_MTD_XIP=y
29CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
30CONFIG_VECTORS_BASE=0xffff0000
31CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
32
33#
34# General setup
35#
36CONFIG_EXPERIMENTAL=y
37CONFIG_BROKEN_ON_SMP=y
38CONFIG_INIT_ENV_ARG_LIMIT=32
39CONFIG_LOCALVERSION=""
40CONFIG_LOCALVERSION_AUTO=y
41# CONFIG_SWAP is not set
42CONFIG_SYSVIPC=y
43CONFIG_SYSVIPC_SYSCTL=y
44# CONFIG_POSIX_MQUEUE is not set
45# CONFIG_BSD_PROCESS_ACCT is not set
46# CONFIG_TASKSTATS is not set
47# CONFIG_AUDIT is not set
48# CONFIG_IKCONFIG is not set
49CONFIG_LOG_BUF_SHIFT=13
50# CONFIG_CGROUPS is not set
51# CONFIG_GROUP_SCHED is not set
52CONFIG_SYSFS_DEPRECATED=y
53CONFIG_SYSFS_DEPRECATED_V2=y
54# CONFIG_RELAY is not set
55# CONFIG_NAMESPACES is not set
56# CONFIG_BLK_DEV_INITRD is not set
57CONFIG_CC_OPTIMIZE_FOR_SIZE=y
58CONFIG_SYSCTL=y
59CONFIG_EMBEDDED=y
60CONFIG_UID16=y
61CONFIG_SYSCTL_SYSCALL=y
62CONFIG_KALLSYMS=y
63# CONFIG_KALLSYMS_ALL is not set
64# CONFIG_KALLSYMS_EXTRA_PASS is not set
65CONFIG_HOTPLUG=y
66CONFIG_PRINTK=y
67CONFIG_BUG=y
68# CONFIG_ELF_CORE is not set
69CONFIG_COMPAT_BRK=y
70CONFIG_BASE_FULL=y
71CONFIG_FUTEX=y
72CONFIG_ANON_INODES=y
73CONFIG_EPOLL=y
74CONFIG_SIGNALFD=y
75CONFIG_TIMERFD=y
76CONFIG_EVENTFD=y
77# CONFIG_SHMEM is not set
78CONFIG_VM_EVENT_COUNTERS=y
79CONFIG_SLAB=y
80# CONFIG_SLUB is not set
81# CONFIG_SLOB is not set
82# CONFIG_PROFILING is not set
83# CONFIG_MARKERS is not set
84CONFIG_HAVE_OPROFILE=y
85# CONFIG_KPROBES is not set
86# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
87# CONFIG_HAVE_IOREMAP_PROT is not set
88CONFIG_HAVE_KPROBES=y
89CONFIG_HAVE_KRETPROBES=y
90# CONFIG_HAVE_ARCH_TRACEHOOK is not set
91# CONFIG_HAVE_DMA_ATTRS is not set
92# CONFIG_USE_GENERIC_SMP_HELPERS is not set
93CONFIG_HAVE_CLK=y
94CONFIG_PROC_PAGE_MONITOR=y
95CONFIG_HAVE_GENERIC_DMA_COHERENT=y
96CONFIG_SLABINFO=y
97CONFIG_RT_MUTEXES=y
98CONFIG_TINY_SHMEM=y
99CONFIG_BASE_SMALL=0
100CONFIG_MODULES=y
101# CONFIG_MODULE_FORCE_LOAD is not set
102CONFIG_MODULE_UNLOAD=y
103# CONFIG_MODULE_FORCE_UNLOAD is not set
104# CONFIG_MODVERSIONS is not set
105# CONFIG_MODULE_SRCVERSION_ALL is not set
106CONFIG_KMOD=y
107CONFIG_BLOCK=y
108# CONFIG_LBD is not set
109# CONFIG_BLK_DEV_IO_TRACE is not set
110# CONFIG_LSF is not set
111# CONFIG_BLK_DEV_BSG is not set
112# CONFIG_BLK_DEV_INTEGRITY is not set
113
114#
115# IO Schedulers
116#
117CONFIG_IOSCHED_NOOP=y
118# CONFIG_IOSCHED_AS is not set
119CONFIG_IOSCHED_DEADLINE=y
120# CONFIG_IOSCHED_CFQ is not set
121# CONFIG_DEFAULT_AS is not set
122CONFIG_DEFAULT_DEADLINE=y
123# CONFIG_DEFAULT_CFQ is not set
124# CONFIG_DEFAULT_NOOP is not set
125CONFIG_DEFAULT_IOSCHED="deadline"
126CONFIG_CLASSIC_RCU=y
127
128#
129# System Type
130#
131# CONFIG_ARCH_AAEC2000 is not set
132# CONFIG_ARCH_INTEGRATOR is not set
133# CONFIG_ARCH_REALVIEW is not set
134# CONFIG_ARCH_VERSATILE is not set
135# CONFIG_ARCH_AT91 is not set
136# CONFIG_ARCH_CLPS7500 is not set
137# CONFIG_ARCH_CLPS711X is not set
138# CONFIG_ARCH_EBSA110 is not set
139# CONFIG_ARCH_EP93XX is not set
140# CONFIG_ARCH_FOOTBRIDGE is not set
141# CONFIG_ARCH_NETX is not set
142# CONFIG_ARCH_H720X is not set
143# CONFIG_ARCH_IMX is not set
144# CONFIG_ARCH_IOP13XX is not set
145# CONFIG_ARCH_IOP32X is not set
146# CONFIG_ARCH_IOP33X is not set
147# CONFIG_ARCH_IXP23XX is not set
148# CONFIG_ARCH_IXP2000 is not set
149# CONFIG_ARCH_IXP4XX is not set
150# CONFIG_ARCH_L7200 is not set
151# CONFIG_ARCH_KIRKWOOD is not set
152# CONFIG_ARCH_KS8695 is not set
153# CONFIG_ARCH_NS9XXX is not set
154# CONFIG_ARCH_LOKI is not set
155# CONFIG_ARCH_MV78XX0 is not set
156# CONFIG_ARCH_MXC is not set
157# CONFIG_ARCH_ORION5X is not set
158# CONFIG_ARCH_PNX4008 is not set
159CONFIG_ARCH_PXA=y
160# CONFIG_ARCH_RPC is not set
161# CONFIG_ARCH_SA1100 is not set
162# CONFIG_ARCH_S3C2410 is not set
163# CONFIG_ARCH_SHARK is not set
164# CONFIG_ARCH_LH7A40X is not set
165# CONFIG_ARCH_DAVINCI is not set
166# CONFIG_ARCH_OMAP is not set
167# CONFIG_ARCH_MSM7X00A is not set
168
169#
170# Intel PXA2xx/PXA3xx Implementations
171#
172# CONFIG_ARCH_GUMSTIX is not set
173# CONFIG_ARCH_LUBBOCK is not set
174# CONFIG_MACH_LOGICPD_PXA270 is not set
175# CONFIG_MACH_MAINSTONE is not set
176# CONFIG_ARCH_PXA_IDP is not set
177# CONFIG_PXA_SHARPSL is not set
178CONFIG_ARCH_VIPER=y
179# CONFIG_ARCH_PXA_ESERIES is not set
180# CONFIG_MACH_TRIZEPS4 is not set
181# CONFIG_MACH_EM_X270 is not set
182# CONFIG_MACH_COLIBRI is not set
183# CONFIG_MACH_ZYLONITE is not set
184# CONFIG_MACH_LITTLETON is not set
185# CONFIG_MACH_TAVOREVB is not set
186# CONFIG_MACH_SAAR is not set
187# CONFIG_MACH_ARMCORE is not set
188# CONFIG_MACH_MAGICIAN is not set
189# CONFIG_MACH_PCM027 is not set
190# CONFIG_ARCH_PXA_PALM is not set
191# CONFIG_PXA_EZX is not set
192CONFIG_PXA25x=y
193CONFIG_PXA_PWM=m
194CONFIG_PXA_HAVE_ISA_IRQS=y
195
196#
197# Boot options
198#
199
200#
201# Power management
202#
203
204#
205# Processor Type
206#
207CONFIG_CPU_32=y
208CONFIG_CPU_XSCALE=y
209CONFIG_CPU_32v5=y
210CONFIG_CPU_ABRT_EV5T=y
211CONFIG_CPU_PABRT_NOIFAR=y
212CONFIG_CPU_CACHE_VIVT=y
213CONFIG_CPU_TLB_V4WBI=y
214CONFIG_CPU_CP15=y
215CONFIG_CPU_CP15_MMU=y
216
217#
218# Processor Features
219#
220CONFIG_ARM_THUMB=y
221# CONFIG_CPU_DCACHE_DISABLE is not set
222# CONFIG_OUTER_CACHE is not set
223CONFIG_IWMMXT=y
224CONFIG_XSCALE_PMU=y
225
226#
227# Bus support
228#
229CONFIG_ISA=y
230# CONFIG_PCI_SYSCALL is not set
231# CONFIG_ARCH_SUPPORTS_MSI is not set
232CONFIG_PCCARD=m
233# CONFIG_PCMCIA_DEBUG is not set
234CONFIG_PCMCIA=m
235CONFIG_PCMCIA_LOAD_CIS=y
236CONFIG_PCMCIA_IOCTL=y
237
238#
239# PC-card bridges
240#
241# CONFIG_I82365 is not set
242# CONFIG_TCIC is not set
243CONFIG_PCMCIA_PXA2XX=m
244CONFIG_PCMCIA_PROBE=y
245
246#
247# Kernel Features
248#
249CONFIG_TICK_ONESHOT=y
250# CONFIG_NO_HZ is not set
251# CONFIG_HIGH_RES_TIMERS is not set
252CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
253# CONFIG_PREEMPT is not set
254CONFIG_HZ=100
255CONFIG_AEABI=y
256CONFIG_OABI_COMPAT=y
257# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
258CONFIG_SELECT_MEMORY_MODEL=y
259CONFIG_FLATMEM_MANUAL=y
260# CONFIG_DISCONTIGMEM_MANUAL is not set
261# CONFIG_SPARSEMEM_MANUAL is not set
262CONFIG_FLATMEM=y
263CONFIG_FLAT_NODE_MEM_MAP=y
264# CONFIG_SPARSEMEM_STATIC is not set
265# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
266CONFIG_PAGEFLAGS_EXTENDED=y
267CONFIG_SPLIT_PTLOCK_CPUS=4096
268# CONFIG_RESOURCES_64BIT is not set
269CONFIG_ZONE_DMA_FLAG=1
270CONFIG_BOUNCE=y
271CONFIG_VIRT_TO_BUS=y
272CONFIG_ALIGNMENT_TRAP=y
273
274#
275# Boot options
276#
277CONFIG_ZBOOT_ROM_TEXT=0x0
278CONFIG_ZBOOT_ROM_BSS=0x0
279CONFIG_CMDLINE="root=31:02 rootfstype=jffs2 ro console=ttyS0,115200"
280# CONFIG_XIP_KERNEL is not set
281# CONFIG_KEXEC is not set
282
283#
284# CPU Frequency scaling
285#
286CONFIG_CPU_FREQ=y
287CONFIG_CPU_FREQ_TABLE=y
288# CONFIG_CPU_FREQ_DEBUG is not set
289CONFIG_CPU_FREQ_STAT=y
290# CONFIG_CPU_FREQ_STAT_DETAILS is not set
291CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
292# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
293# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
294# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
295# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
296CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
297CONFIG_CPU_FREQ_GOV_POWERSAVE=m
298CONFIG_CPU_FREQ_GOV_USERSPACE=m
299CONFIG_CPU_FREQ_GOV_ONDEMAND=m
300CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
301CONFIG_CPU_FREQ_PXA=y
302
303#
304# Floating point emulation
305#
306
307#
308# At least one emulation must be selected
309#
310# CONFIG_FPE_NWFPE is not set
311CONFIG_FPE_FASTFPE=y
312
313#
314# Userspace binary formats
315#
316CONFIG_BINFMT_ELF=y
317# CONFIG_BINFMT_AOUT is not set
318# CONFIG_BINFMT_MISC is not set
319
320#
321# Power management options
322#
323CONFIG_PM=y
324# CONFIG_PM_DEBUG is not set
325CONFIG_PM_SLEEP=y
326CONFIG_SUSPEND=y
327CONFIG_SUSPEND_FREEZER=y
328# CONFIG_APM_EMULATION is not set
329CONFIG_ARCH_SUSPEND_POSSIBLE=y
330CONFIG_NET=y
331
332#
333# Networking options
334#
335CONFIG_PACKET=y
336# CONFIG_PACKET_MMAP is not set
337CONFIG_UNIX=y
338CONFIG_XFRM=y
339# CONFIG_XFRM_USER is not set
340# CONFIG_XFRM_SUB_POLICY is not set
341# CONFIG_XFRM_MIGRATE is not set
342# CONFIG_XFRM_STATISTICS is not set
343# CONFIG_NET_KEY is not set
344CONFIG_INET=y
345# CONFIG_IP_MULTICAST is not set
346# CONFIG_IP_ADVANCED_ROUTER is not set
347CONFIG_IP_FIB_HASH=y
348CONFIG_IP_PNP=y
349CONFIG_IP_PNP_DHCP=y
350# CONFIG_IP_PNP_BOOTP is not set
351# CONFIG_IP_PNP_RARP is not set
352# CONFIG_NET_IPIP is not set
353# CONFIG_NET_IPGRE is not set
354# CONFIG_ARPD is not set
355CONFIG_SYN_COOKIES=y
356# CONFIG_INET_AH is not set
357# CONFIG_INET_ESP is not set
358# CONFIG_INET_IPCOMP is not set
359# CONFIG_INET_XFRM_TUNNEL is not set
360# CONFIG_INET_TUNNEL is not set
361CONFIG_INET_XFRM_MODE_TRANSPORT=y
362CONFIG_INET_XFRM_MODE_TUNNEL=y
363CONFIG_INET_XFRM_MODE_BEET=y
364# CONFIG_INET_LRO is not set
365CONFIG_INET_DIAG=y
366CONFIG_INET_TCP_DIAG=y
367# CONFIG_TCP_CONG_ADVANCED is not set
368CONFIG_TCP_CONG_CUBIC=y
369CONFIG_DEFAULT_TCP_CONG="cubic"
370# CONFIG_TCP_MD5SIG is not set
371# CONFIG_IPV6 is not set
372# CONFIG_NETWORK_SECMARK is not set
373# CONFIG_NETFILTER is not set
374# CONFIG_IP_DCCP is not set
375# CONFIG_IP_SCTP is not set
376# CONFIG_TIPC is not set
377# CONFIG_ATM is not set
378# CONFIG_BRIDGE is not set
379# CONFIG_VLAN_8021Q is not set
380# CONFIG_DECNET is not set
381# CONFIG_LLC2 is not set
382# CONFIG_IPX is not set
383# CONFIG_ATALK is not set
384# CONFIG_X25 is not set
385# CONFIG_LAPB is not set
386# CONFIG_ECONET is not set
387# CONFIG_WAN_ROUTER is not set
388# CONFIG_NET_SCHED is not set
389
390#
391# Network testing
392#
393# CONFIG_NET_PKTGEN is not set
394# CONFIG_HAMRADIO is not set
395# CONFIG_CAN is not set
396# CONFIG_IRDA is not set
397CONFIG_BT=m
398CONFIG_BT_L2CAP=m
399# CONFIG_BT_SCO is not set
400CONFIG_BT_RFCOMM=m
401CONFIG_BT_RFCOMM_TTY=y
402CONFIG_BT_BNEP=m
403# CONFIG_BT_BNEP_MC_FILTER is not set
404# CONFIG_BT_BNEP_PROTO_FILTER is not set
405# CONFIG_BT_HIDP is not set
406
407#
408# Bluetooth device drivers
409#
410CONFIG_BT_HCIUSB=m
411# CONFIG_BT_HCIUSB_SCO is not set
412# CONFIG_BT_HCIBTUSB is not set
413CONFIG_BT_HCIUART=m
414CONFIG_BT_HCIUART_H4=y
415CONFIG_BT_HCIUART_BCSP=y
416# CONFIG_BT_HCIUART_LL is not set
417# CONFIG_BT_HCIBCM203X is not set
418# CONFIG_BT_HCIBPA10X is not set
419# CONFIG_BT_HCIBFUSB is not set
420# CONFIG_BT_HCIDTL1 is not set
421# CONFIG_BT_HCIBT3C is not set
422# CONFIG_BT_HCIBLUECARD is not set
423# CONFIG_BT_HCIBTUART is not set
424# CONFIG_BT_HCIVHCI is not set
425# CONFIG_AF_RXRPC is not set
426
427#
428# Wireless
429#
430# CONFIG_CFG80211 is not set
431# CONFIG_WIRELESS_EXT is not set
432# CONFIG_MAC80211 is not set
433CONFIG_IEEE80211=m
434# CONFIG_IEEE80211_DEBUG is not set
435CONFIG_IEEE80211_CRYPT_WEP=m
436# CONFIG_IEEE80211_CRYPT_CCMP is not set
437# CONFIG_IEEE80211_CRYPT_TKIP is not set
438# CONFIG_RFKILL is not set
439# CONFIG_NET_9P is not set
440
441#
442# Device Drivers
443#
444
445#
446# Generic Driver Options
447#
448CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
449CONFIG_STANDALONE=y
450CONFIG_PREVENT_FIRMWARE_BUILD=y
451CONFIG_FW_LOADER=m
452CONFIG_FIRMWARE_IN_KERNEL=y
453CONFIG_EXTRA_FIRMWARE=""
454# CONFIG_DEBUG_DRIVER is not set
455# CONFIG_DEBUG_DEVRES is not set
456# CONFIG_SYS_HYPERVISOR is not set
457# CONFIG_CONNECTOR is not set
458CONFIG_MTD=y
459# CONFIG_MTD_DEBUG is not set
460# CONFIG_MTD_CONCAT is not set
461CONFIG_MTD_PARTITIONS=y
462CONFIG_MTD_REDBOOT_PARTS=y
463CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=0
464# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
465# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
466# CONFIG_MTD_CMDLINE_PARTS is not set
467# CONFIG_MTD_AFS_PARTS is not set
468# CONFIG_MTD_AR7_PARTS is not set
469
470#
471# User Modules And Translation Layers
472#
473CONFIG_MTD_CHAR=m
474CONFIG_MTD_BLKDEVS=y
475CONFIG_MTD_BLOCK=y
476# CONFIG_FTL is not set
477# CONFIG_NFTL is not set
478# CONFIG_INFTL is not set
479# CONFIG_RFD_FTL is not set
480# CONFIG_SSFDC is not set
481# CONFIG_MTD_OOPS is not set
482
483#
484# RAM/ROM/Flash chip drivers
485#
486CONFIG_MTD_CFI=y
487CONFIG_MTD_JEDECPROBE=y
488CONFIG_MTD_GEN_PROBE=y
489CONFIG_MTD_CFI_ADV_OPTIONS=y
490CONFIG_MTD_CFI_NOSWAP=y
491# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
492# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
493CONFIG_MTD_CFI_GEOMETRY=y
494CONFIG_MTD_MAP_BANK_WIDTH_1=y
495CONFIG_MTD_MAP_BANK_WIDTH_2=y
496# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
497# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
498# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
499# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
500CONFIG_MTD_CFI_I1=y
501# CONFIG_MTD_CFI_I2 is not set
502# CONFIG_MTD_CFI_I4 is not set
503# CONFIG_MTD_CFI_I8 is not set
504# CONFIG_MTD_OTP is not set
505CONFIG_MTD_CFI_INTELEXT=y
506CONFIG_MTD_CFI_AMDSTD=y
507# CONFIG_MTD_CFI_STAA is not set
508CONFIG_MTD_CFI_UTIL=y
509CONFIG_MTD_RAM=y
510# CONFIG_MTD_ROM is not set
511# CONFIG_MTD_ABSENT is not set
512# CONFIG_MTD_XIP is not set
513
514#
515# Mapping drivers for chip access
516#
517CONFIG_MTD_COMPLEX_MAPPINGS=y
518CONFIG_MTD_PHYSMAP=y
519CONFIG_MTD_PHYSMAP_START=0x8000000
520CONFIG_MTD_PHYSMAP_LEN=0
521CONFIG_MTD_PHYSMAP_BANKWIDTH=2
522CONFIG_MTD_PXA2XX=y
523# CONFIG_MTD_ARM_INTEGRATOR is not set
524# CONFIG_MTD_IMPA7 is not set
525# CONFIG_MTD_SHARP_SL is not set
526# CONFIG_MTD_PLATRAM is not set
527CONFIG_MTD_SPARSE_RAM=y
528
529#
530# Self-contained MTD device drivers
531#
532# CONFIG_MTD_SLRAM is not set
533# CONFIG_MTD_PHRAM is not set
534# CONFIG_MTD_MTDRAM is not set
535# CONFIG_MTD_BLOCK2MTD is not set
536
537#
538# Disk-On-Chip Device Drivers
539#
540# CONFIG_MTD_DOC2000 is not set
541# CONFIG_MTD_DOC2001 is not set
542# CONFIG_MTD_DOC2001PLUS is not set
543# CONFIG_MTD_NAND is not set
544# CONFIG_MTD_ONENAND is not set
545
546#
547# UBI - Unsorted block images
548#
549# CONFIG_MTD_UBI is not set
550# CONFIG_PARPORT is not set
551# CONFIG_PNP is not set
552CONFIG_BLK_DEV=y
553# CONFIG_BLK_DEV_COW_COMMON is not set
554CONFIG_BLK_DEV_LOOP=m
555# CONFIG_BLK_DEV_CRYPTOLOOP is not set
556# CONFIG_BLK_DEV_NBD is not set
557# CONFIG_BLK_DEV_UB is not set
558# CONFIG_BLK_DEV_RAM is not set
559# CONFIG_CDROM_PKTCDVD is not set
560# CONFIG_ATA_OVER_ETH is not set
561CONFIG_MISC_DEVICES=y
562# CONFIG_EEPROM_93CX6 is not set
563# CONFIG_ENCLOSURE_SERVICES is not set
564CONFIG_HAVE_IDE=y
565# CONFIG_IDE is not set
566
567#
568# SCSI device support
569#
570# CONFIG_RAID_ATTRS is not set
571CONFIG_SCSI=m
572CONFIG_SCSI_DMA=y
573# CONFIG_SCSI_TGT is not set
574# CONFIG_SCSI_NETLINK is not set
575# CONFIG_SCSI_PROC_FS is not set
576
577#
578# SCSI support type (disk, tape, CD-ROM)
579#
580CONFIG_BLK_DEV_SD=m
581# CONFIG_CHR_DEV_ST is not set
582# CONFIG_CHR_DEV_OSST is not set
583# CONFIG_BLK_DEV_SR is not set
584# CONFIG_CHR_DEV_SG is not set
585# CONFIG_CHR_DEV_SCH is not set
586
587#
588# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
589#
590# CONFIG_SCSI_MULTI_LUN is not set
591# CONFIG_SCSI_CONSTANTS is not set
592# CONFIG_SCSI_LOGGING is not set
593# CONFIG_SCSI_SCAN_ASYNC is not set
594CONFIG_SCSI_WAIT_SCAN=m
595
596#
597# SCSI Transports
598#
599# CONFIG_SCSI_SPI_ATTRS is not set
600# CONFIG_SCSI_FC_ATTRS is not set
601# CONFIG_SCSI_ISCSI_ATTRS is not set
602# CONFIG_SCSI_SAS_LIBSAS is not set
603# CONFIG_SCSI_SRP_ATTRS is not set
604CONFIG_SCSI_LOWLEVEL=y
605# CONFIG_ISCSI_TCP is not set
606# CONFIG_SCSI_AHA152X is not set
607# CONFIG_SCSI_AIC7XXX_OLD is not set
608# CONFIG_SCSI_ADVANSYS is not set
609# CONFIG_SCSI_IN2000 is not set
610# CONFIG_SCSI_DTC3280 is not set
611# CONFIG_SCSI_FUTURE_DOMAIN is not set
612# CONFIG_SCSI_GENERIC_NCR5380 is not set
613# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
614# CONFIG_SCSI_NCR53C406A is not set
615# CONFIG_SCSI_PAS16 is not set
616# CONFIG_SCSI_QLOGIC_FAS is not set
617# CONFIG_SCSI_SYM53C416 is not set
618# CONFIG_SCSI_T128 is not set
619# CONFIG_SCSI_DEBUG is not set
620# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
621# CONFIG_SCSI_DH is not set
622CONFIG_ATA=m
623# CONFIG_ATA_NONSTANDARD is not set
624# CONFIG_SATA_PMP is not set
625CONFIG_ATA_SFF=y
626# CONFIG_SATA_MV is not set
627# CONFIG_PATA_LEGACY is not set
628CONFIG_PATA_PCMCIA=m
629# CONFIG_PATA_QDI is not set
630# CONFIG_PATA_WINBOND_VLB is not set
631# CONFIG_PATA_PLATFORM is not set
632# CONFIG_MD is not set
633CONFIG_NETDEVICES=y
634# CONFIG_DUMMY is not set
635# CONFIG_BONDING is not set
636# CONFIG_MACVLAN is not set
637# CONFIG_EQUALIZER is not set
638# CONFIG_TUN is not set
639# CONFIG_VETH is not set
640# CONFIG_ARCNET is not set
641# CONFIG_PHYLIB is not set
642CONFIG_NET_ETHERNET=y
643CONFIG_MII=y
644# CONFIG_AX88796 is not set
645# CONFIG_NET_VENDOR_3COM is not set
646# CONFIG_NET_VENDOR_SMC is not set
647CONFIG_SMC91X=y
648# CONFIG_DM9000 is not set
649# CONFIG_SMC911X is not set
650# CONFIG_NET_VENDOR_RACAL is not set
651# CONFIG_AT1700 is not set
652# CONFIG_DEPCA is not set
653# CONFIG_HP100 is not set
654# CONFIG_NET_ISA is not set
655# CONFIG_IBM_NEW_EMAC_ZMII is not set
656# CONFIG_IBM_NEW_EMAC_RGMII is not set
657# CONFIG_IBM_NEW_EMAC_TAH is not set
658# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
659# CONFIG_NET_PCI is not set
660# CONFIG_B44 is not set
661# CONFIG_NETDEV_1000 is not set
662# CONFIG_NETDEV_10000 is not set
663# CONFIG_TR is not set
664
665#
666# Wireless LAN
667#
668# CONFIG_WLAN_PRE80211 is not set
669# CONFIG_WLAN_80211 is not set
670# CONFIG_IWLWIFI_LEDS is not set
671
672#
673# USB Network Adapters
674#
675# CONFIG_USB_CATC is not set
676# CONFIG_USB_KAWETH is not set
677CONFIG_USB_PEGASUS=m
678# CONFIG_USB_RTL8150 is not set
679CONFIG_USB_USBNET=m
680CONFIG_USB_NET_AX8817X=m
681CONFIG_USB_NET_CDCETHER=m
682# CONFIG_USB_NET_DM9601 is not set
683# CONFIG_USB_NET_GL620A is not set
684CONFIG_USB_NET_NET1080=m
685# CONFIG_USB_NET_PLUSB is not set
686# CONFIG_USB_NET_MCS7830 is not set
687# CONFIG_USB_NET_RNDIS_HOST is not set
688# CONFIG_USB_NET_CDC_SUBSET is not set
689CONFIG_USB_NET_ZAURUS=m
690CONFIG_NET_PCMCIA=y
691# CONFIG_PCMCIA_3C589 is not set
692# CONFIG_PCMCIA_3C574 is not set
693# CONFIG_PCMCIA_FMVJ18X is not set
694# CONFIG_PCMCIA_PCNET is not set
695# CONFIG_PCMCIA_NMCLAN is not set
696# CONFIG_PCMCIA_SMC91C92 is not set
697# CONFIG_PCMCIA_XIRC2PS is not set
698# CONFIG_PCMCIA_AXNET is not set
699# CONFIG_WAN is not set
700CONFIG_PPP=m
701# CONFIG_PPP_MULTILINK is not set
702# CONFIG_PPP_FILTER is not set
703CONFIG_PPP_ASYNC=m
704# CONFIG_PPP_SYNC_TTY is not set
705CONFIG_PPP_DEFLATE=m
706CONFIG_PPP_BSDCOMP=m
707# CONFIG_PPP_MPPE is not set
708# CONFIG_PPPOE is not set
709# CONFIG_PPPOL2TP is not set
710# CONFIG_SLIP is not set
711CONFIG_SLHC=m
712# CONFIG_NETCONSOLE is not set
713# CONFIG_NETPOLL is not set
714# CONFIG_NET_POLL_CONTROLLER is not set
715# CONFIG_ISDN is not set
716
717#
718# Input device support
719#
720CONFIG_INPUT=y
721# CONFIG_INPUT_FF_MEMLESS is not set
722# CONFIG_INPUT_POLLDEV is not set
723
724#
725# Userland interfaces
726#
727CONFIG_INPUT_MOUSEDEV=m
728# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
729CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
730CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
731# CONFIG_INPUT_JOYDEV is not set
732CONFIG_INPUT_EVDEV=m
733# CONFIG_INPUT_EVBUG is not set
734
735#
736# Input Device Drivers
737#
738# CONFIG_INPUT_KEYBOARD is not set
739# CONFIG_INPUT_MOUSE is not set
740# CONFIG_INPUT_JOYSTICK is not set
741# CONFIG_INPUT_TABLET is not set
742CONFIG_INPUT_TOUCHSCREEN=y
743CONFIG_TOUCHSCREEN_FUJITSU=m
744# CONFIG_TOUCHSCREEN_GUNZE is not set
745CONFIG_TOUCHSCREEN_ELO=m
746CONFIG_TOUCHSCREEN_MTOUCH=m
747CONFIG_TOUCHSCREEN_INEXIO=m
748# CONFIG_TOUCHSCREEN_MK712 is not set
749CONFIG_TOUCHSCREEN_HTCPEN=m
750CONFIG_TOUCHSCREEN_PENMOUNT=m
751CONFIG_TOUCHSCREEN_TOUCHRIGHT=m
752CONFIG_TOUCHSCREEN_TOUCHWIN=m
753# CONFIG_TOUCHSCREEN_UCB1400 is not set
754# CONFIG_TOUCHSCREEN_WM97XX is not set
755# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
756CONFIG_TOUCHSCREEN_TOUCHIT213=m
757CONFIG_INPUT_MISC=y
758# CONFIG_INPUT_ATI_REMOTE is not set
759# CONFIG_INPUT_ATI_REMOTE2 is not set
760# CONFIG_INPUT_KEYSPAN_REMOTE is not set
761# CONFIG_INPUT_POWERMATE is not set
762# CONFIG_INPUT_YEALINK is not set
763CONFIG_INPUT_UINPUT=m
764
765#
766# Hardware I/O ports
767#
768CONFIG_SERIO=y
769CONFIG_SERIO_SERPORT=y
770# CONFIG_SERIO_LIBPS2 is not set
771# CONFIG_SERIO_RAW is not set
772# CONFIG_GAMEPORT is not set
773
774#
775# Character devices
776#
777CONFIG_VT=y
778# CONFIG_CONSOLE_TRANSLATIONS is not set
779# CONFIG_VT_CONSOLE is not set
780CONFIG_HW_CONSOLE=y
781# CONFIG_VT_HW_CONSOLE_BINDING is not set
782CONFIG_DEVKMEM=y
783# CONFIG_SERIAL_NONSTANDARD is not set
784
785#
786# Serial drivers
787#
788CONFIG_SERIAL_8250=m
789# CONFIG_SERIAL_8250_CS is not set
790CONFIG_SERIAL_8250_NR_UARTS=5
791CONFIG_SERIAL_8250_RUNTIME_UARTS=5
792# CONFIG_SERIAL_8250_EXTENDED is not set
793
794#
795# Non-8250 serial port support
796#
797CONFIG_SERIAL_PXA=y
798CONFIG_SERIAL_PXA_CONSOLE=y
799CONFIG_SERIAL_CORE=y
800CONFIG_SERIAL_CORE_CONSOLE=y
801CONFIG_UNIX98_PTYS=y
802# CONFIG_LEGACY_PTYS is not set
803# CONFIG_IPMI_HANDLER is not set
804CONFIG_HW_RANDOM=m
805# CONFIG_NVRAM is not set
806# CONFIG_DTLK is not set
807# CONFIG_R3964 is not set
808
809#
810# PCMCIA character devices
811#
812# CONFIG_SYNCLINK_CS is not set
813# CONFIG_CARDMAN_4000 is not set
814# CONFIG_CARDMAN_4040 is not set
815# CONFIG_IPWIRELESS is not set
816# CONFIG_RAW_DRIVER is not set
817# CONFIG_TCG_TPM is not set
818CONFIG_DEVPORT=y
819CONFIG_I2C=y
820CONFIG_I2C_BOARDINFO=y
821CONFIG_I2C_CHARDEV=y
822# CONFIG_I2C_HELPER_AUTO is not set
823
824#
825# I2C Algorithms
826#
827CONFIG_I2C_ALGOBIT=y
828# CONFIG_I2C_ALGOPCF is not set
829# CONFIG_I2C_ALGOPCA is not set
830
831#
832# I2C Hardware Bus support
833#
834
835#
836# I2C system bus drivers (mostly embedded / system-on-chip)
837#
838CONFIG_I2C_GPIO=y
839# CONFIG_I2C_OCORES is not set
840CONFIG_I2C_PXA=y
841# CONFIG_I2C_PXA_SLAVE is not set
842# CONFIG_I2C_SIMTEC is not set
843
844#
845# External I2C/SMBus adapter drivers
846#
847# CONFIG_I2C_PARPORT_LIGHT is not set
848# CONFIG_I2C_TAOS_EVM is not set
849# CONFIG_I2C_TINY_USB is not set
850
851#
852# Other I2C/SMBus bus drivers
853#
854# CONFIG_I2C_ELEKTOR is not set
855# CONFIG_I2C_PCA_ISA is not set
856# CONFIG_I2C_PCA_PLATFORM is not set
857# CONFIG_I2C_STUB is not set
858
859#
860# Miscellaneous I2C Chip support
861#
862# CONFIG_DS1682 is not set
863# CONFIG_AT24 is not set
864# CONFIG_SENSORS_EEPROM is not set
865# CONFIG_SENSORS_PCF8574 is not set
866# CONFIG_PCF8575 is not set
867# CONFIG_SENSORS_PCA9539 is not set
868# CONFIG_SENSORS_PCF8591 is not set
869# CONFIG_TPS65010 is not set
870# CONFIG_SENSORS_MAX6875 is not set
871# CONFIG_SENSORS_TSL2550 is not set
872# CONFIG_I2C_DEBUG_CORE is not set
873# CONFIG_I2C_DEBUG_ALGO is not set
874# CONFIG_I2C_DEBUG_BUS is not set
875# CONFIG_I2C_DEBUG_CHIP is not set
876# CONFIG_SPI is not set
877CONFIG_ARCH_REQUIRE_GPIOLIB=y
878CONFIG_GPIOLIB=y
879# CONFIG_DEBUG_GPIO is not set
880CONFIG_GPIO_SYSFS=y
881
882#
883# I2C GPIO expanders:
884#
885# CONFIG_GPIO_MAX732X is not set
886# CONFIG_GPIO_PCA953X is not set
887# CONFIG_GPIO_PCF857X is not set
888
889#
890# PCI GPIO expanders:
891#
892
893#
894# SPI GPIO expanders:
895#
896# CONFIG_W1 is not set
897# CONFIG_POWER_SUPPLY is not set
898CONFIG_HWMON=y
899# CONFIG_HWMON_VID is not set
900# CONFIG_SENSORS_AD7414 is not set
901# CONFIG_SENSORS_AD7418 is not set
902# CONFIG_SENSORS_ADM1021 is not set
903# CONFIG_SENSORS_ADM1025 is not set
904# CONFIG_SENSORS_ADM1026 is not set
905# CONFIG_SENSORS_ADM1029 is not set
906# CONFIG_SENSORS_ADM1031 is not set
907# CONFIG_SENSORS_ADM9240 is not set
908# CONFIG_SENSORS_ADT7470 is not set
909# CONFIG_SENSORS_ADT7473 is not set
910# CONFIG_SENSORS_ATXP1 is not set
911# CONFIG_SENSORS_DS1621 is not set
912# CONFIG_SENSORS_F71805F is not set
913# CONFIG_SENSORS_F71882FG is not set
914# CONFIG_SENSORS_F75375S is not set
915# CONFIG_SENSORS_GL518SM is not set
916# CONFIG_SENSORS_GL520SM is not set
917# CONFIG_SENSORS_IT87 is not set
918# CONFIG_SENSORS_LM63 is not set
919# CONFIG_SENSORS_LM75 is not set
920# CONFIG_SENSORS_LM77 is not set
921# CONFIG_SENSORS_LM78 is not set
922# CONFIG_SENSORS_LM80 is not set
923# CONFIG_SENSORS_LM83 is not set
924# CONFIG_SENSORS_LM85 is not set
925# CONFIG_SENSORS_LM87 is not set
926# CONFIG_SENSORS_LM90 is not set
927# CONFIG_SENSORS_LM92 is not set
928# CONFIG_SENSORS_LM93 is not set
929# CONFIG_SENSORS_MAX1619 is not set
930# CONFIG_SENSORS_MAX6650 is not set
931# CONFIG_SENSORS_PC87360 is not set
932# CONFIG_SENSORS_PC87427 is not set
933# CONFIG_SENSORS_DME1737 is not set
934# CONFIG_SENSORS_SMSC47M1 is not set
935# CONFIG_SENSORS_SMSC47M192 is not set
936# CONFIG_SENSORS_SMSC47B397 is not set
937# CONFIG_SENSORS_ADS7828 is not set
938# CONFIG_SENSORS_THMC50 is not set
939# CONFIG_SENSORS_VT1211 is not set
940# CONFIG_SENSORS_W83781D is not set
941# CONFIG_SENSORS_W83791D is not set
942# CONFIG_SENSORS_W83792D is not set
943# CONFIG_SENSORS_W83793 is not set
944# CONFIG_SENSORS_W83L785TS is not set
945# CONFIG_SENSORS_W83L786NG is not set
946# CONFIG_SENSORS_W83627HF is not set
947# CONFIG_SENSORS_W83627EHF is not set
948# CONFIG_HWMON_DEBUG_CHIP is not set
949CONFIG_WATCHDOG=y
950# CONFIG_WATCHDOG_NOWAYOUT is not set
951
952#
953# Watchdog Device Drivers
954#
955# CONFIG_SOFT_WATCHDOG is not set
956# CONFIG_SA1100_WATCHDOG is not set
957
958#
959# ISA-based Watchdog Cards
960#
961# CONFIG_PCWATCHDOG is not set
962# CONFIG_MIXCOMWD is not set
963# CONFIG_WDT is not set
964
965#
966# USB-based Watchdog Cards
967#
968# CONFIG_USBPCWATCHDOG is not set
969
970#
971# Sonics Silicon Backplane
972#
973CONFIG_SSB_POSSIBLE=y
974# CONFIG_SSB is not set
975
976#
977# Multifunction device drivers
978#
979# CONFIG_MFD_CORE is not set
980# CONFIG_MFD_SM501 is not set
981# CONFIG_HTC_EGPIO is not set
982# CONFIG_HTC_PASIC3 is not set
983# CONFIG_MFD_TMIO is not set
984# CONFIG_MFD_T7L66XB is not set
985# CONFIG_MFD_TC6387XB is not set
986# CONFIG_MFD_TC6393XB is not set
987
988#
989# Multimedia devices
990#
991
992#
993# Multimedia core support
994#
995# CONFIG_VIDEO_DEV is not set
996# CONFIG_DVB_CORE is not set
997# CONFIG_VIDEO_MEDIA is not set
998
999#
1000# Multimedia drivers
1001#
1002# CONFIG_DAB is not set
1003
1004#
1005# Graphics support
1006#
1007# CONFIG_VGASTATE is not set
1008# CONFIG_VIDEO_OUTPUT_CONTROL is not set
1009CONFIG_FB=y
1010# CONFIG_FIRMWARE_EDID is not set
1011# CONFIG_FB_DDC is not set
1012CONFIG_FB_CFB_FILLRECT=m
1013CONFIG_FB_CFB_COPYAREA=m
1014CONFIG_FB_CFB_IMAGEBLIT=m
1015# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
1016# CONFIG_FB_SYS_FILLRECT is not set
1017# CONFIG_FB_SYS_COPYAREA is not set
1018# CONFIG_FB_SYS_IMAGEBLIT is not set
1019# CONFIG_FB_FOREIGN_ENDIAN is not set
1020# CONFIG_FB_SYS_FOPS is not set
1021# CONFIG_FB_SVGALIB is not set
1022# CONFIG_FB_MACMODES is not set
1023# CONFIG_FB_BACKLIGHT is not set
1024# CONFIG_FB_MODE_HELPERS is not set
1025# CONFIG_FB_TILEBLITTING is not set
1026
1027#
1028# Frame buffer hardware drivers
1029#
1030# CONFIG_FB_S1D13XXX is not set
1031CONFIG_FB_PXA=m
1032# CONFIG_FB_PXA_SMARTPANEL is not set
1033CONFIG_FB_PXA_PARAMETERS=y
1034# CONFIG_FB_MBX is not set
1035# CONFIG_FB_W100 is not set
1036# CONFIG_FB_AM200EPD is not set
1037# CONFIG_FB_VIRTUAL is not set
1038CONFIG_BACKLIGHT_LCD_SUPPORT=y
1039CONFIG_LCD_CLASS_DEVICE=m
1040# CONFIG_LCD_ILI9320 is not set
1041# CONFIG_LCD_PLATFORM is not set
1042CONFIG_BACKLIGHT_CLASS_DEVICE=m
1043# CONFIG_BACKLIGHT_CORGI is not set
1044CONFIG_BACKLIGHT_PWM=m
1045
1046#
1047# Display device support
1048#
1049# CONFIG_DISPLAY_SUPPORT is not set
1050
1051#
1052# Console display driver support
1053#
1054# CONFIG_VGA_CONSOLE is not set
1055# CONFIG_MDA_CONSOLE is not set
1056CONFIG_DUMMY_CONSOLE=y
1057CONFIG_FRAMEBUFFER_CONSOLE=m
1058# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
1059# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
1060# CONFIG_FONTS is not set
1061CONFIG_FONT_8x8=y
1062CONFIG_FONT_8x16=y
1063CONFIG_LOGO=y
1064CONFIG_LOGO_LINUX_MONO=y
1065CONFIG_LOGO_LINUX_VGA16=y
1066CONFIG_LOGO_LINUX_CLUT224=y
1067CONFIG_SOUND=m
1068CONFIG_SND=m
1069CONFIG_SND_TIMER=m
1070CONFIG_SND_PCM=m
1071# CONFIG_SND_SEQUENCER is not set
1072CONFIG_SND_OSSEMUL=y
1073CONFIG_SND_MIXER_OSS=m
1074CONFIG_SND_PCM_OSS=m
1075CONFIG_SND_PCM_OSS_PLUGINS=y
1076# CONFIG_SND_DYNAMIC_MINORS is not set
1077CONFIG_SND_SUPPORT_OLD_API=y
1078CONFIG_SND_VERBOSE_PROCFS=y
1079# CONFIG_SND_VERBOSE_PRINTK is not set
1080# CONFIG_SND_DEBUG is not set
1081CONFIG_SND_VMASTER=y
1082CONFIG_SND_AC97_CODEC=m
1083CONFIG_SND_DRIVERS=y
1084# CONFIG_SND_DUMMY is not set
1085# CONFIG_SND_MTPAV is not set
1086# CONFIG_SND_SERIAL_U16550 is not set
1087# CONFIG_SND_MPU401 is not set
1088# CONFIG_SND_AC97_POWER_SAVE is not set
1089CONFIG_SND_ARM=y
1090CONFIG_SND_PXA2XX_PCM=m
1091CONFIG_SND_PXA2XX_AC97=m
1092CONFIG_SND_USB=y
1093# CONFIG_SND_USB_AUDIO is not set
1094# CONFIG_SND_USB_CAIAQ is not set
1095CONFIG_SND_PCMCIA=y
1096# CONFIG_SND_VXPOCKET is not set
1097# CONFIG_SND_PDAUDIOCF is not set
1098# CONFIG_SND_SOC is not set
1099# CONFIG_SOUND_PRIME is not set
1100CONFIG_AC97_BUS=m
1101CONFIG_HID_SUPPORT=y
1102CONFIG_HID=y
1103# CONFIG_HID_DEBUG is not set
1104# CONFIG_HIDRAW is not set
1105
1106#
1107# USB Input Devices
1108#
1109CONFIG_USB_HID=m
1110# CONFIG_USB_HIDINPUT_POWERBOOK is not set
1111# CONFIG_HID_FF is not set
1112# CONFIG_USB_HIDDEV is not set
1113
1114#
1115# USB HID Boot Protocol drivers
1116#
1117# CONFIG_USB_KBD is not set
1118# CONFIG_USB_MOUSE is not set
1119CONFIG_USB_SUPPORT=y
1120CONFIG_USB_ARCH_HAS_HCD=y
1121# CONFIG_USB_ARCH_HAS_OHCI is not set
1122# CONFIG_USB_ARCH_HAS_EHCI is not set
1123CONFIG_USB=m
1124# CONFIG_USB_DEBUG is not set
1125# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
1126
1127#
1128# Miscellaneous USB options
1129#
1130CONFIG_USB_DEVICEFS=y
1131CONFIG_USB_DEVICE_CLASS=y
1132# CONFIG_USB_DYNAMIC_MINORS is not set
1133CONFIG_USB_SUSPEND=y
1134# CONFIG_USB_OTG is not set
1135# CONFIG_USB_OTG_WHITELIST is not set
1136# CONFIG_USB_OTG_BLACKLIST_HUB is not set
1137# CONFIG_USB_MON is not set
1138
1139#
1140# USB Host Controller Drivers
1141#
1142# CONFIG_USB_C67X00_HCD is not set
1143CONFIG_USB_ISP116X_HCD=m
1144# CONFIG_USB_ISP1760_HCD is not set
1145CONFIG_USB_SL811_HCD=m
1146# CONFIG_USB_SL811_CS is not set
1147CONFIG_USB_R8A66597_HCD=m
1148# CONFIG_USB_MUSB_HDRC is not set
1149# CONFIG_USB_GADGET_MUSB_HDRC is not set
1150
1151#
1152# USB Device Class drivers
1153#
1154CONFIG_USB_ACM=m
1155# CONFIG_USB_PRINTER is not set
1156# CONFIG_USB_WDM is not set
1157
1158#
1159# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
1160#
1161
1162#
1163# may also be needed; see USB_STORAGE Help for more information
1164#
1165CONFIG_USB_STORAGE=m
1166# CONFIG_USB_STORAGE_DEBUG is not set
1167# CONFIG_USB_STORAGE_DATAFAB is not set
1168# CONFIG_USB_STORAGE_FREECOM is not set
1169# CONFIG_USB_STORAGE_ISD200 is not set
1170# CONFIG_USB_STORAGE_DPCM is not set
1171# CONFIG_USB_STORAGE_USBAT is not set
1172# CONFIG_USB_STORAGE_SDDR09 is not set
1173# CONFIG_USB_STORAGE_SDDR55 is not set
1174# CONFIG_USB_STORAGE_JUMPSHOT is not set
1175# CONFIG_USB_STORAGE_ALAUDA is not set
1176# CONFIG_USB_STORAGE_ONETOUCH is not set
1177# CONFIG_USB_STORAGE_KARMA is not set
1178# CONFIG_USB_STORAGE_SIERRA is not set
1179# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
1180# CONFIG_USB_LIBUSUAL is not set
1181
1182#
1183# USB Imaging devices
1184#
1185# CONFIG_USB_MDC800 is not set
1186# CONFIG_USB_MICROTEK is not set
1187
1188#
1189# USB port drivers
1190#
1191CONFIG_USB_SERIAL=m
1192# CONFIG_USB_EZUSB is not set
1193CONFIG_USB_SERIAL_GENERIC=y
1194# CONFIG_USB_SERIAL_AIRCABLE is not set
1195# CONFIG_USB_SERIAL_ARK3116 is not set
1196# CONFIG_USB_SERIAL_BELKIN is not set
1197# CONFIG_USB_SERIAL_CH341 is not set
1198# CONFIG_USB_SERIAL_WHITEHEAT is not set
1199# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
1200# CONFIG_USB_SERIAL_CP2101 is not set
1201# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
1202# CONFIG_USB_SERIAL_EMPEG is not set
1203# CONFIG_USB_SERIAL_FTDI_SIO is not set
1204# CONFIG_USB_SERIAL_FUNSOFT is not set
1205# CONFIG_USB_SERIAL_VISOR is not set
1206# CONFIG_USB_SERIAL_IPAQ is not set
1207# CONFIG_USB_SERIAL_IR is not set
1208# CONFIG_USB_SERIAL_EDGEPORT is not set
1209# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
1210# CONFIG_USB_SERIAL_GARMIN is not set
1211# CONFIG_USB_SERIAL_IPW is not set
1212# CONFIG_USB_SERIAL_IUU is not set
1213# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
1214# CONFIG_USB_SERIAL_KEYSPAN is not set
1215# CONFIG_USB_SERIAL_KLSI is not set
1216# CONFIG_USB_SERIAL_KOBIL_SCT is not set
1217CONFIG_USB_SERIAL_MCT_U232=m
1218# CONFIG_USB_SERIAL_MOS7720 is not set
1219# CONFIG_USB_SERIAL_MOS7840 is not set
1220# CONFIG_USB_SERIAL_MOTOROLA is not set
1221# CONFIG_USB_SERIAL_NAVMAN is not set
1222# CONFIG_USB_SERIAL_PL2303 is not set
1223# CONFIG_USB_SERIAL_OTI6858 is not set
1224# CONFIG_USB_SERIAL_SPCP8X5 is not set
1225# CONFIG_USB_SERIAL_HP4X is not set
1226# CONFIG_USB_SERIAL_SAFE is not set
1227# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
1228# CONFIG_USB_SERIAL_TI is not set
1229# CONFIG_USB_SERIAL_CYBERJACK is not set
1230# CONFIG_USB_SERIAL_XIRCOM is not set
1231# CONFIG_USB_SERIAL_OPTION is not set
1232# CONFIG_USB_SERIAL_OMNINET is not set
1233# CONFIG_USB_SERIAL_DEBUG is not set
1234
1235#
1236# USB Miscellaneous drivers
1237#
1238# CONFIG_USB_EMI62 is not set
1239# CONFIG_USB_EMI26 is not set
1240# CONFIG_USB_ADUTUX is not set
1241# CONFIG_USB_RIO500 is not set
1242# CONFIG_USB_LEGOTOWER is not set
1243# CONFIG_USB_LCD is not set
1244# CONFIG_USB_BERRY_CHARGE is not set
1245# CONFIG_USB_LED is not set
1246# CONFIG_USB_CYPRESS_CY7C63 is not set
1247# CONFIG_USB_CYTHERM is not set
1248# CONFIG_USB_PHIDGET is not set
1249# CONFIG_USB_IDMOUSE is not set
1250# CONFIG_USB_FTDI_ELAN is not set
1251# CONFIG_USB_APPLEDISPLAY is not set
1252# CONFIG_USB_LD is not set
1253# CONFIG_USB_TRANCEVIBRATOR is not set
1254# CONFIG_USB_IOWARRIOR is not set
1255# CONFIG_USB_TEST is not set
1256# CONFIG_USB_ISIGHTFW is not set
1257CONFIG_USB_GADGET=m
1258# CONFIG_USB_GADGET_DEBUG is not set
1259# CONFIG_USB_GADGET_DEBUG_FILES is not set
1260CONFIG_USB_GADGET_SELECTED=y
1261# CONFIG_USB_GADGET_AMD5536UDC is not set
1262# CONFIG_USB_GADGET_ATMEL_USBA is not set
1263# CONFIG_USB_GADGET_FSL_USB2 is not set
1264# CONFIG_USB_GADGET_NET2280 is not set
1265CONFIG_USB_GADGET_PXA25X=y
1266CONFIG_USB_PXA25X=m
1267# CONFIG_USB_PXA25X_SMALL is not set
1268# CONFIG_USB_GADGET_M66592 is not set
1269# CONFIG_USB_GADGET_PXA27X is not set
1270# CONFIG_USB_GADGET_GOKU is not set
1271# CONFIG_USB_GADGET_LH7A40X is not set
1272# CONFIG_USB_GADGET_OMAP is not set
1273# CONFIG_USB_GADGET_S3C2410 is not set
1274# CONFIG_USB_GADGET_AT91 is not set
1275# CONFIG_USB_GADGET_DUMMY_HCD is not set
1276# CONFIG_USB_GADGET_DUALSPEED is not set
1277# CONFIG_USB_ZERO is not set
1278CONFIG_USB_ETH=m
1279CONFIG_USB_ETH_RNDIS=y
1280CONFIG_USB_GADGETFS=m
1281CONFIG_USB_FILE_STORAGE=m
1282# CONFIG_USB_FILE_STORAGE_TEST is not set
1283CONFIG_USB_G_SERIAL=m
1284# CONFIG_USB_MIDI_GADGET is not set
1285CONFIG_USB_G_PRINTER=m
1286# CONFIG_USB_CDC_COMPOSITE is not set
1287# CONFIG_MMC is not set
1288# CONFIG_NEW_LEDS is not set
1289CONFIG_RTC_LIB=y
1290CONFIG_RTC_CLASS=m
1291
1292#
1293# RTC interfaces
1294#
1295CONFIG_RTC_INTF_SYSFS=y
1296CONFIG_RTC_INTF_PROC=y
1297CONFIG_RTC_INTF_DEV=y
1298# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
1299# CONFIG_RTC_DRV_TEST is not set
1300
1301#
1302# I2C RTC drivers
1303#
1304CONFIG_RTC_DRV_DS1307=m
1305# CONFIG_RTC_DRV_DS1374 is not set
1306# CONFIG_RTC_DRV_DS1672 is not set
1307# CONFIG_RTC_DRV_MAX6900 is not set
1308# CONFIG_RTC_DRV_RS5C372 is not set
1309# CONFIG_RTC_DRV_ISL1208 is not set
1310# CONFIG_RTC_DRV_X1205 is not set
1311# CONFIG_RTC_DRV_PCF8563 is not set
1312# CONFIG_RTC_DRV_PCF8583 is not set
1313# CONFIG_RTC_DRV_M41T80 is not set
1314# CONFIG_RTC_DRV_S35390A is not set
1315# CONFIG_RTC_DRV_FM3130 is not set
1316
1317#
1318# SPI RTC drivers
1319#
1320
1321#
1322# Platform RTC drivers
1323#
1324# CONFIG_RTC_DRV_CMOS is not set
1325# CONFIG_RTC_DRV_DS1511 is not set
1326# CONFIG_RTC_DRV_DS1553 is not set
1327# CONFIG_RTC_DRV_DS1742 is not set
1328# CONFIG_RTC_DRV_STK17TA8 is not set
1329# CONFIG_RTC_DRV_M48T86 is not set
1330# CONFIG_RTC_DRV_M48T59 is not set
1331# CONFIG_RTC_DRV_V3020 is not set
1332
1333#
1334# on-CPU RTC drivers
1335#
1336CONFIG_RTC_DRV_SA1100=m
1337# CONFIG_DMADEVICES is not set
1338
1339#
1340# Voltage and Current regulators
1341#
1342# CONFIG_REGULATOR is not set
1343# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
1344# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
1345# CONFIG_REGULATOR_BQ24022 is not set
1346# CONFIG_UIO is not set
1347
1348#
1349# File systems
1350#
1351CONFIG_EXT2_FS=m
1352# CONFIG_EXT2_FS_XATTR is not set
1353# CONFIG_EXT2_FS_XIP is not set
1354CONFIG_EXT3_FS=m
1355# CONFIG_EXT3_FS_XATTR is not set
1356# CONFIG_EXT4DEV_FS is not set
1357CONFIG_JBD=m
1358# CONFIG_REISERFS_FS is not set
1359# CONFIG_JFS_FS is not set
1360# CONFIG_FS_POSIX_ACL is not set
1361# CONFIG_XFS_FS is not set
1362# CONFIG_OCFS2_FS is not set
1363# CONFIG_DNOTIFY is not set
1364CONFIG_INOTIFY=y
1365CONFIG_INOTIFY_USER=y
1366# CONFIG_QUOTA is not set
1367# CONFIG_AUTOFS_FS is not set
1368# CONFIG_AUTOFS4_FS is not set
1369# CONFIG_FUSE_FS is not set
1370
1371#
1372# CD-ROM/DVD Filesystems
1373#
1374# CONFIG_ISO9660_FS is not set
1375# CONFIG_UDF_FS is not set
1376
1377#
1378# DOS/FAT/NT Filesystems
1379#
1380CONFIG_FAT_FS=m
1381# CONFIG_MSDOS_FS is not set
1382CONFIG_VFAT_FS=m
1383CONFIG_FAT_DEFAULT_CODEPAGE=437
1384CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
1385# CONFIG_NTFS_FS is not set
1386
1387#
1388# Pseudo filesystems
1389#
1390CONFIG_PROC_FS=y
1391CONFIG_PROC_SYSCTL=y
1392CONFIG_SYSFS=y
1393CONFIG_TMPFS=y
1394# CONFIG_TMPFS_POSIX_ACL is not set
1395# CONFIG_HUGETLB_PAGE is not set
1396# CONFIG_CONFIGFS_FS is not set
1397
1398#
1399# Miscellaneous filesystems
1400#
1401# CONFIG_ADFS_FS is not set
1402# CONFIG_AFFS_FS is not set
1403# CONFIG_HFS_FS is not set
1404# CONFIG_HFSPLUS_FS is not set
1405# CONFIG_BEFS_FS is not set
1406# CONFIG_BFS_FS is not set
1407# CONFIG_EFS_FS is not set
1408CONFIG_JFFS2_FS=y
1409CONFIG_JFFS2_FS_DEBUG=0
1410CONFIG_JFFS2_FS_WRITEBUFFER=y
1411# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
1412# CONFIG_JFFS2_SUMMARY is not set
1413# CONFIG_JFFS2_FS_XATTR is not set
1414# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
1415CONFIG_JFFS2_ZLIB=y
1416# CONFIG_JFFS2_LZO is not set
1417CONFIG_JFFS2_RTIME=y
1418# CONFIG_JFFS2_RUBIN is not set
1419# CONFIG_CRAMFS is not set
1420# CONFIG_VXFS_FS is not set
1421# CONFIG_MINIX_FS is not set
1422# CONFIG_OMFS_FS is not set
1423# CONFIG_HPFS_FS is not set
1424# CONFIG_QNX4FS_FS is not set
1425# CONFIG_ROMFS_FS is not set
1426# CONFIG_SYSV_FS is not set
1427# CONFIG_UFS_FS is not set
1428CONFIG_NETWORK_FILESYSTEMS=y
1429CONFIG_NFS_FS=y
1430CONFIG_NFS_V3=y
1431# CONFIG_NFS_V3_ACL is not set
1432# CONFIG_NFS_V4 is not set
1433CONFIG_ROOT_NFS=y
1434CONFIG_NFSD=m
1435CONFIG_NFSD_V3=y
1436# CONFIG_NFSD_V3_ACL is not set
1437# CONFIG_NFSD_V4 is not set
1438CONFIG_LOCKD=y
1439CONFIG_LOCKD_V4=y
1440CONFIG_EXPORTFS=m
1441CONFIG_NFS_COMMON=y
1442CONFIG_SUNRPC=y
1443# CONFIG_RPCSEC_GSS_KRB5 is not set
1444# CONFIG_RPCSEC_GSS_SPKM3 is not set
1445# CONFIG_SMB_FS is not set
1446# CONFIG_CIFS is not set
1447# CONFIG_NCP_FS is not set
1448# CONFIG_CODA_FS is not set
1449# CONFIG_AFS_FS is not set
1450
1451#
1452# Partition Types
1453#
1454CONFIG_PARTITION_ADVANCED=y
1455# CONFIG_ACORN_PARTITION is not set
1456# CONFIG_OSF_PARTITION is not set
1457# CONFIG_AMIGA_PARTITION is not set
1458# CONFIG_ATARI_PARTITION is not set
1459# CONFIG_MAC_PARTITION is not set
1460CONFIG_MSDOS_PARTITION=y
1461# CONFIG_BSD_DISKLABEL is not set
1462# CONFIG_MINIX_SUBPARTITION is not set
1463# CONFIG_SOLARIS_X86_PARTITION is not set
1464# CONFIG_UNIXWARE_DISKLABEL is not set
1465# CONFIG_LDM_PARTITION is not set
1466# CONFIG_SGI_PARTITION is not set
1467# CONFIG_ULTRIX_PARTITION is not set
1468# CONFIG_SUN_PARTITION is not set
1469# CONFIG_KARMA_PARTITION is not set
1470# CONFIG_EFI_PARTITION is not set
1471# CONFIG_SYSV68_PARTITION is not set
1472CONFIG_NLS=m
1473CONFIG_NLS_DEFAULT="iso8859-1"
1474CONFIG_NLS_CODEPAGE_437=m
1475# CONFIG_NLS_CODEPAGE_737 is not set
1476# CONFIG_NLS_CODEPAGE_775 is not set
1477CONFIG_NLS_CODEPAGE_850=m
1478# CONFIG_NLS_CODEPAGE_852 is not set
1479# CONFIG_NLS_CODEPAGE_855 is not set
1480# CONFIG_NLS_CODEPAGE_857 is not set
1481# CONFIG_NLS_CODEPAGE_860 is not set
1482# CONFIG_NLS_CODEPAGE_861 is not set
1483# CONFIG_NLS_CODEPAGE_862 is not set
1484# CONFIG_NLS_CODEPAGE_863 is not set
1485# CONFIG_NLS_CODEPAGE_864 is not set
1486# CONFIG_NLS_CODEPAGE_865 is not set
1487# CONFIG_NLS_CODEPAGE_866 is not set
1488# CONFIG_NLS_CODEPAGE_869 is not set
1489# CONFIG_NLS_CODEPAGE_936 is not set
1490# CONFIG_NLS_CODEPAGE_950 is not set
1491# CONFIG_NLS_CODEPAGE_932 is not set
1492# CONFIG_NLS_CODEPAGE_949 is not set
1493# CONFIG_NLS_CODEPAGE_874 is not set
1494# CONFIG_NLS_ISO8859_8 is not set
1495# CONFIG_NLS_CODEPAGE_1250 is not set
1496# CONFIG_NLS_CODEPAGE_1251 is not set
1497# CONFIG_NLS_ASCII is not set
1498CONFIG_NLS_ISO8859_1=m
1499# CONFIG_NLS_ISO8859_2 is not set
1500# CONFIG_NLS_ISO8859_3 is not set
1501# CONFIG_NLS_ISO8859_4 is not set
1502# CONFIG_NLS_ISO8859_5 is not set
1503# CONFIG_NLS_ISO8859_6 is not set
1504# CONFIG_NLS_ISO8859_7 is not set
1505# CONFIG_NLS_ISO8859_9 is not set
1506# CONFIG_NLS_ISO8859_13 is not set
1507# CONFIG_NLS_ISO8859_14 is not set
1508CONFIG_NLS_ISO8859_15=m
1509# CONFIG_NLS_KOI8_R is not set
1510# CONFIG_NLS_KOI8_U is not set
1511CONFIG_NLS_UTF8=m
1512# CONFIG_DLM is not set
1513
1514#
1515# Kernel hacking
1516#
1517# CONFIG_PRINTK_TIME is not set
1518CONFIG_ENABLE_WARN_DEPRECATED=y
1519CONFIG_ENABLE_MUST_CHECK=y
1520CONFIG_FRAME_WARN=1024
1521CONFIG_MAGIC_SYSRQ=y
1522# CONFIG_UNUSED_SYMBOLS is not set
1523# CONFIG_DEBUG_FS is not set
1524# CONFIG_HEADERS_CHECK is not set
1525CONFIG_DEBUG_KERNEL=y
1526# CONFIG_DEBUG_SHIRQ is not set
1527CONFIG_DETECT_SOFTLOCKUP=y
1528# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
1529CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
1530CONFIG_SCHED_DEBUG=y
1531# CONFIG_SCHEDSTATS is not set
1532# CONFIG_TIMER_STATS is not set
1533# CONFIG_DEBUG_OBJECTS is not set
1534# CONFIG_DEBUG_SLAB is not set
1535# CONFIG_DEBUG_RT_MUTEXES is not set
1536# CONFIG_RT_MUTEX_TESTER is not set
1537# CONFIG_DEBUG_SPINLOCK is not set
1538CONFIG_DEBUG_MUTEXES=y
1539# CONFIG_DEBUG_LOCK_ALLOC is not set
1540# CONFIG_PROVE_LOCKING is not set
1541# CONFIG_LOCK_STAT is not set
1542# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
1543# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
1544# CONFIG_DEBUG_KOBJECT is not set
1545CONFIG_DEBUG_BUGVERBOSE=y
1546# CONFIG_DEBUG_INFO is not set
1547# CONFIG_DEBUG_VM is not set
1548# CONFIG_DEBUG_WRITECOUNT is not set
1549# CONFIG_DEBUG_MEMORY_INIT is not set
1550# CONFIG_DEBUG_LIST is not set
1551# CONFIG_DEBUG_SG is not set
1552CONFIG_FRAME_POINTER=y
1553# CONFIG_BOOT_PRINTK_DELAY is not set
1554# CONFIG_RCU_TORTURE_TEST is not set
1555# CONFIG_BACKTRACE_SELF_TEST is not set
1556# CONFIG_FAULT_INJECTION is not set
1557# CONFIG_LATENCYTOP is not set
1558CONFIG_SYSCTL_SYSCALL_CHECK=y
1559CONFIG_HAVE_FTRACE=y
1560CONFIG_HAVE_DYNAMIC_FTRACE=y
1561# CONFIG_FTRACE is not set
1562# CONFIG_IRQSOFF_TRACER is not set
1563# CONFIG_SCHED_TRACER is not set
1564# CONFIG_CONTEXT_SWITCH_TRACER is not set
1565# CONFIG_SAMPLES is not set
1566CONFIG_HAVE_ARCH_KGDB=y
1567# CONFIG_KGDB is not set
1568# CONFIG_DEBUG_USER is not set
1569CONFIG_DEBUG_ERRORS=y
1570# CONFIG_DEBUG_STACK_USAGE is not set
1571# CONFIG_DEBUG_LL is not set
1572
1573#
1574# Security options
1575#
1576# CONFIG_KEYS is not set
1577# CONFIG_SECURITY is not set
1578# CONFIG_SECURITY_FILE_CAPABILITIES is not set
1579CONFIG_CRYPTO=y
1580
1581#
1582# Crypto core or helper
1583#
1584CONFIG_CRYPTO_ALGAPI=m
1585CONFIG_CRYPTO_BLKCIPHER=m
1586CONFIG_CRYPTO_MANAGER=m
1587# CONFIG_CRYPTO_GF128MUL is not set
1588# CONFIG_CRYPTO_NULL is not set
1589# CONFIG_CRYPTO_CRYPTD is not set
1590# CONFIG_CRYPTO_AUTHENC is not set
1591# CONFIG_CRYPTO_TEST is not set
1592
1593#
1594# Authenticated Encryption with Associated Data
1595#
1596# CONFIG_CRYPTO_CCM is not set
1597# CONFIG_CRYPTO_GCM is not set
1598# CONFIG_CRYPTO_SEQIV is not set
1599
1600#
1601# Block modes
1602#
1603# CONFIG_CRYPTO_CBC is not set
1604# CONFIG_CRYPTO_CTR is not set
1605# CONFIG_CRYPTO_CTS is not set
1606CONFIG_CRYPTO_ECB=m
1607# CONFIG_CRYPTO_LRW is not set
1608# CONFIG_CRYPTO_PCBC is not set
1609# CONFIG_CRYPTO_XTS is not set
1610
1611#
1612# Hash modes
1613#
1614# CONFIG_CRYPTO_HMAC is not set
1615# CONFIG_CRYPTO_XCBC is not set
1616
1617#
1618# Digest
1619#
1620# CONFIG_CRYPTO_CRC32C is not set
1621# CONFIG_CRYPTO_MD4 is not set
1622# CONFIG_CRYPTO_MD5 is not set
1623# CONFIG_CRYPTO_MICHAEL_MIC is not set
1624# CONFIG_CRYPTO_RMD128 is not set
1625# CONFIG_CRYPTO_RMD160 is not set
1626# CONFIG_CRYPTO_RMD256 is not set
1627# CONFIG_CRYPTO_RMD320 is not set
1628# CONFIG_CRYPTO_SHA1 is not set
1629# CONFIG_CRYPTO_SHA256 is not set
1630# CONFIG_CRYPTO_SHA512 is not set
1631# CONFIG_CRYPTO_TGR192 is not set
1632# CONFIG_CRYPTO_WP512 is not set
1633
1634#
1635# Ciphers
1636#
1637# CONFIG_CRYPTO_AES is not set
1638# CONFIG_CRYPTO_ANUBIS is not set
1639CONFIG_CRYPTO_ARC4=m
1640# CONFIG_CRYPTO_BLOWFISH is not set
1641# CONFIG_CRYPTO_CAMELLIA is not set
1642# CONFIG_CRYPTO_CAST5 is not set
1643# CONFIG_CRYPTO_CAST6 is not set
1644# CONFIG_CRYPTO_DES is not set
1645# CONFIG_CRYPTO_FCRYPT is not set
1646# CONFIG_CRYPTO_KHAZAD is not set
1647# CONFIG_CRYPTO_SALSA20 is not set
1648# CONFIG_CRYPTO_SEED is not set
1649# CONFIG_CRYPTO_SERPENT is not set
1650# CONFIG_CRYPTO_TEA is not set
1651# CONFIG_CRYPTO_TWOFISH is not set
1652
1653#
1654# Compression
1655#
1656# CONFIG_CRYPTO_DEFLATE is not set
1657# CONFIG_CRYPTO_LZO is not set
1658CONFIG_CRYPTO_HW=y
1659
1660#
1661# Library routines
1662#
1663CONFIG_BITREVERSE=y
1664# CONFIG_GENERIC_FIND_FIRST_BIT is not set
1665# CONFIG_GENERIC_FIND_NEXT_BIT is not set
1666CONFIG_CRC_CCITT=m
1667# CONFIG_CRC16 is not set
1668CONFIG_CRC_T10DIF=m
1669# CONFIG_CRC_ITU_T is not set
1670CONFIG_CRC32=y
1671# CONFIG_CRC7 is not set
1672# CONFIG_LIBCRC32C is not set
1673CONFIG_ZLIB_INFLATE=y
1674CONFIG_ZLIB_DEFLATE=y
1675CONFIG_PLIST=y
1676CONFIG_HAS_IOMEM=y
1677CONFIG_HAS_IOPORT=y
1678CONFIG_HAS_DMA=y
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index 5548abd6390c..f781873431f3 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -38,16 +38,19 @@ config ARCH_LUBBOCK
38 bool "Intel DBPXA250 Development Platform" 38 bool "Intel DBPXA250 Development Platform"
39 select PXA25x 39 select PXA25x
40 select SA1111 40 select SA1111
41 select PXA_HAVE_BOARD_IRQS
41 42
42config MACH_LOGICPD_PXA270 43config MACH_LOGICPD_PXA270
43 bool "LogicPD PXA270 Card Engine Development Platform" 44 bool "LogicPD PXA270 Card Engine Development Platform"
44 select PXA27x 45 select PXA27x
45 select HAVE_PWM 46 select HAVE_PWM
47 select PXA_HAVE_BOARD_IRQS
46 48
47config MACH_MAINSTONE 49config MACH_MAINSTONE
48 bool "Intel HCDDBBVA0 Development Platform" 50 bool "Intel HCDDBBVA0 Development Platform"
49 select PXA27x 51 select PXA27x
50 select HAVE_PWM 52 select HAVE_PWM
53 select PXA_HAVE_BOARD_IRQS
51 54
52config MACH_MP900C 55config MACH_MP900C
53 bool "Nec Mobilepro 900/c" 56 bool "Nec Mobilepro 900/c"
@@ -118,10 +121,21 @@ config MACH_TOSA
118 bool "Enable Sharp SL-6000x (Tosa) Support" 121 bool "Enable Sharp SL-6000x (Tosa) Support"
119 depends on PXA_SHARPSL 122 depends on PXA_SHARPSL
120 select PXA25x 123 select PXA25x
124 select PXA_HAVE_BOARD_IRQS
125
126config ARCH_VIPER
127 bool "Arcom/Eurotech VIPER SBC"
128 select PXA25x
129 select ISA
130 select I2C_GPIO
131 select HAVE_PWM
132 select PXA_HAVE_BOARD_IRQS
133 select PXA_HAVE_ISA_IRQS
121 134
122config ARCH_PXA_ESERIES 135config ARCH_PXA_ESERIES
123 bool "PXA based Toshiba e-series PDAs" 136 bool "PXA based Toshiba e-series PDAs"
124 select PXA25x 137 select PXA25x
138 select PXA_HAVE_BOARD_IRQS
125 139
126config MACH_E330 140config MACH_E330
127 bool "Toshiba e330" 141 bool "Toshiba e330"
@@ -255,6 +269,7 @@ config MACH_MAGICIAN
255 bool "Enable HTC Magician Support" 269 bool "Enable HTC Magician Support"
256 select PXA27x 270 select PXA27x
257 select IWMMXT 271 select IWMMXT
272 select PXA_HAVE_BOARD_IRQS
258 273
259config MACH_MIOA701 274config MACH_MIOA701
260 bool "Mitac Mio A701 Support" 275 bool "Mitac Mio A701 Support"
@@ -273,6 +288,7 @@ config MACH_PCM027
273 select PXA27x 288 select PXA27x
274 select IWMMXT 289 select IWMMXT
275 select PXA_SSP 290 select PXA_SSP
291 select PXA_HAVE_BOARD_IRQS
276 292
277config ARCH_PXA_PALM 293config ARCH_PXA_PALM
278 bool "PXA based Palm PDAs" 294 bool "PXA based Palm PDAs"
@@ -408,4 +424,10 @@ config TOSA_BT
408 This is a simple driver that is able to control 424 This is a simple driver that is able to control
409 the state of built in bluetooth chip on tosa. 425 the state of built in bluetooth chip on tosa.
410 426
427config PXA_HAVE_BOARD_IRQS
428 bool
429
430config PXA_HAVE_ISA_IRQS
431 bool
432
411endif 433endif
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index 30936e40fea6..3d2dea4afb87 100644
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -39,13 +39,16 @@ obj-$(CONFIG_MACH_TOSA) += tosa.o
39obj-$(CONFIG_MACH_EM_X270) += em-x270.o 39obj-$(CONFIG_MACH_EM_X270) += em-x270.o
40obj-$(CONFIG_MACH_MAGICIAN) += magician.o 40obj-$(CONFIG_MACH_MAGICIAN) += magician.o
41obj-$(CONFIG_MACH_MIOA701) += mioa701.o mioa701_bootresume.o 41obj-$(CONFIG_MACH_MIOA701) += mioa701.o mioa701_bootresume.o
42obj-$(CONFIG_ARCH_PXA_ESERIES) += eseries.o eseries_udc.o 42obj-$(CONFIG_ARCH_PXA_ESERIES) += eseries.o
43obj-$(CONFIG_MACH_E740) += e740_lcd.o 43obj-$(CONFIG_MACH_E330) += e330.o
44obj-$(CONFIG_MACH_E750) += e750_lcd.o 44obj-$(CONFIG_MACH_E350) += e350.o
45obj-$(CONFIG_MACH_E400) += e400_lcd.o 45obj-$(CONFIG_MACH_E740) += e740.o
46obj-$(CONFIG_MACH_E800) += e800_lcd.o 46obj-$(CONFIG_MACH_E750) += e750.o
47obj-$(CONFIG_MACH_E400) += e400.o
48obj-$(CONFIG_MACH_E800) += e800.o
47obj-$(CONFIG_MACH_PALMTX) += palmtx.o 49obj-$(CONFIG_MACH_PALMTX) += palmtx.o
48obj-$(CONFIG_MACH_PALMZ72) += palmz72.o 50obj-$(CONFIG_MACH_PALMZ72) += palmz72.o
51obj-$(CONFIG_ARCH_VIPER) += viper.o
49 52
50ifeq ($(CONFIG_MACH_ZYLONITE),y) 53ifeq ($(CONFIG_MACH_ZYLONITE),y)
51 obj-y += zylonite.o 54 obj-y += zylonite.o
diff --git a/arch/arm/mach-pxa/include/mach/entry-macro.S b/arch/arm/mach-pxa/include/mach/entry-macro.S
index de16c12d5232..f6b4bf3e73d2 100644
--- a/arch/arm/mach-pxa/include/mach/entry-macro.S
+++ b/arch/arm/mach-pxa/include/mach/entry-macro.S
@@ -41,7 +41,7 @@
41 and \irqstat, \irqstat, \irqnr 41 and \irqstat, \irqstat, \irqnr
42 clz \irqnr, \irqstat 42 clz \irqnr, \irqstat
43 rsb \irqnr, \irqnr, #31 43 rsb \irqnr, \irqnr, #31
44 add \irqnr, \irqnr, #32 44 add \irqnr, \irqnr, #(32 + PXA_IRQ(0))
45 b 1001f 45 b 1001f
461003: 461003:
47 mrc p6, 0, \irqstat, c0, c0, 0 @ ICIP 47 mrc p6, 0, \irqstat, c0, c0, 0 @ ICIP
@@ -52,6 +52,6 @@
52 rsb \irqstat, \irqnr, #0 52 rsb \irqstat, \irqnr, #0
53 and \irqstat, \irqstat, \irqnr 53 and \irqstat, \irqstat, \irqnr
54 clz \irqnr, \irqstat 54 clz \irqnr, \irqstat
55 rsb \irqnr, \irqnr, #31 55 rsb \irqnr, \irqnr, #(31 + PXA_IRQ(0))
561001: 561001:
57 .endm 57 .endm
diff --git a/arch/arm/mach-pxa/include/mach/irqs.h b/arch/arm/mach-pxa/include/mach/irqs.h
index 108b5db9b2af..9c163e19ada9 100644
--- a/arch/arm/mach-pxa/include/mach/irqs.h
+++ b/arch/arm/mach-pxa/include/mach/irqs.h
@@ -11,7 +11,14 @@
11 */ 11 */
12 12
13 13
14#define PXA_IRQ(x) (x) 14#ifdef CONFIG_PXA_HAVE_ISA_IRQS
15#define PXA_ISA_IRQ(x) (x)
16#define PXA_ISA_IRQ_NUM (16)
17#else
18#define PXA_ISA_IRQ_NUM (0)
19#endif
20
21#define PXA_IRQ(x) (PXA_ISA_IRQ_NUM + (x))
15 22
16#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx) 23#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
17#define IRQ_SSP3 PXA_IRQ(0) /* SSP3 service request */ 24#define IRQ_SSP3 PXA_IRQ(0) /* SSP3 service request */
@@ -73,7 +80,7 @@
73#define IRQ_MMC3 PXA_IRQ(55) /* MMC3 Controller (PXA310) */ 80#define IRQ_MMC3 PXA_IRQ(55) /* MMC3 Controller (PXA310) */
74#endif 81#endif
75 82
76#define PXA_GPIO_IRQ_BASE (64) 83#define PXA_GPIO_IRQ_BASE PXA_IRQ(64)
77#define PXA_GPIO_IRQ_NUM (128) 84#define PXA_GPIO_IRQ_NUM (128)
78 85
79#define GPIO_2_x_TO_IRQ(x) (PXA_GPIO_IRQ_BASE + (x)) 86#define GPIO_2_x_TO_IRQ(x) (PXA_GPIO_IRQ_BASE + (x))
@@ -178,13 +185,7 @@
178#define NR_IRQS (IRQ_S1_BVD1_STSCHG + 1) 185#define NR_IRQS (IRQ_S1_BVD1_STSCHG + 1)
179#elif defined(CONFIG_SHARP_LOCOMO) 186#elif defined(CONFIG_SHARP_LOCOMO)
180#define NR_IRQS (IRQ_LOCOMO_SPI_TEND + 1) 187#define NR_IRQS (IRQ_LOCOMO_SPI_TEND + 1)
181#elif defined(CONFIG_ARCH_LUBBOCK) || \ 188#elif defined(CONFIG_PXA_HAVE_BOARD_IRQS)
182 defined(CONFIG_MACH_LOGICPD_PXA270) || \
183 defined(CONFIG_MACH_TOSA) || \
184 defined(CONFIG_MACH_MAINSTONE) || \
185 defined(CONFIG_MACH_PCM027) || \
186 defined(CONFIG_ARCH_PXA_ESERIES) || \
187 defined(CONFIG_MACH_MAGICIAN)
188#define NR_IRQS (IRQ_BOARD_END) 189#define NR_IRQS (IRQ_BOARD_END)
189#elif defined(CONFIG_MACH_ZYLONITE) 190#elif defined(CONFIG_MACH_ZYLONITE)
190#define NR_IRQS (IRQ_BOARD_START + 32) 191#define NR_IRQS (IRQ_BOARD_START + 32)
diff --git a/arch/arm/mach-pxa/include/mach/viper.h b/arch/arm/mach-pxa/include/mach/viper.h
new file mode 100644
index 000000000000..10988c270ca3
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/viper.h
@@ -0,0 +1,96 @@
1/*
2 * arch/arm/mach-pxa/include/mach/viper.h
3 *
4 * Author: Ian Campbell
5 * Created: Feb 03, 2003
6 * Copyright: Arcom Control Systems.
7 *
8 * Maintained by Marc Zyngier <maz@misterjones.org>
9 * <marc.zyngier@altran.com>
10 *
11 * Created based on lubbock.h:
12 * Author: Nicolas Pitre
13 * Created: Jun 15, 2001
14 * Copyright: MontaVista Software Inc.
15 *
16 * This program is free software; you can redistribute it and/or modify
17 * it under the terms of the GNU General Public License version 2 as
18 * published by the Free Software Foundation.
19 */
20
21#ifndef ARCH_VIPER_H
22#define ARCH_VIPER_H
23
24#define VIPER_BOOT_PHYS PXA_CS0_PHYS
25#define VIPER_FLASH_PHYS PXA_CS1_PHYS
26#define VIPER_ETH_PHYS PXA_CS2_PHYS
27#define VIPER_USB_PHYS PXA_CS3_PHYS
28#define VIPER_ETH_DATA_PHYS PXA_CS4_PHYS
29#define VIPER_CPLD_PHYS PXA_CS5_PHYS
30
31#define VIPER_CPLD_BASE (0xf0000000)
32#define VIPER_PC104IO_BASE (0xf1000000)
33#define VIPER_USB_BASE (0xf1800000)
34
35#define VIPER_ETH_GPIO (0)
36#define VIPER_CPLD_GPIO (1)
37#define VIPER_USB_GPIO (2)
38#define VIPER_UARTA_GPIO (4)
39#define VIPER_UARTB_GPIO (3)
40#define VIPER_CF_CD_GPIO (32)
41#define VIPER_CF_RDY_GPIO (8)
42#define VIPER_BCKLIGHT_EN_GPIO (9)
43#define VIPER_LCD_EN_GPIO (10)
44#define VIPER_PSU_DATA_GPIO (6)
45#define VIPER_PSU_CLK_GPIO (11)
46#define VIPER_UART_SHDN_GPIO (12)
47#define VIPER_BRIGHTNESS_GPIO (16)
48#define VIPER_PSU_nCS_LD_GPIO (19)
49#define VIPER_UPS_GPIO (20)
50#define VIPER_CF_POWER_GPIO (82)
51#define VIPER_TPM_I2C_SDA_GPIO (26)
52#define VIPER_TPM_I2C_SCL_GPIO (27)
53#define VIPER_RTC_I2C_SDA_GPIO (83)
54#define VIPER_RTC_I2C_SCL_GPIO (84)
55
56#define VIPER_CPLD_P2V(x) ((x) - VIPER_CPLD_PHYS + VIPER_CPLD_BASE)
57#define VIPER_CPLD_V2P(x) ((x) - VIPER_CPLD_BASE + VIPER_CPLD_PHYS)
58
59#ifndef __ASSEMBLY__
60# define __VIPER_CPLD_REG(x) (*((volatile u16 *)VIPER_CPLD_P2V(x)))
61#endif
62
63/* board level registers in the CPLD: (offsets from CPLD_BASE) ... */
64
65/* ... Physical addresses */
66#define _VIPER_LO_IRQ_STATUS (VIPER_CPLD_PHYS + 0x100000)
67#define _VIPER_ICR_PHYS (VIPER_CPLD_PHYS + 0x100002)
68#define _VIPER_HI_IRQ_STATUS (VIPER_CPLD_PHYS + 0x100004)
69#define _VIPER_VERSION_PHYS (VIPER_CPLD_PHYS + 0x100006)
70#define VIPER_UARTA_PHYS (VIPER_CPLD_PHYS + 0x300010)
71#define VIPER_UARTB_PHYS (VIPER_CPLD_PHYS + 0x300000)
72#define _VIPER_SRAM_BASE (VIPER_CPLD_PHYS + 0x800000)
73
74/* ... Virtual addresses */
75#define VIPER_LO_IRQ_STATUS __VIPER_CPLD_REG(_VIPER_LO_IRQ_STATUS)
76#define VIPER_HI_IRQ_STATUS __VIPER_CPLD_REG(_VIPER_HI_IRQ_STATUS)
77#define VIPER_VERSION __VIPER_CPLD_REG(_VIPER_VERSION_PHYS)
78#define VIPER_ICR __VIPER_CPLD_REG(_VIPER_ICR_PHYS)
79
80/* Decode VIPER_VERSION register */
81#define VIPER_CPLD_REVISION(x) (((x) >> 5) & 0x7)
82#define VIPER_BOARD_VERSION(x) (((x) >> 3) & 0x3)
83#define VIPER_BOARD_ISSUE(x) (((x) >> 0) & 0x7)
84
85/* Interrupt and Configuration Register (VIPER_ICR) */
86/* This is a write only register. Only CF_RST is used under Linux */
87
88extern void viper_cf_rst(int state);
89
90#define VIPER_ICR_RETRIG (1 << 0)
91#define VIPER_ICR_AUTO_CLR (1 << 1)
92#define VIPER_ICR_R_DIS (1 << 2)
93#define VIPER_ICR_CF_RST (1 << 3)
94
95#endif
96
diff --git a/arch/arm/mach-pxa/irq.c b/arch/arm/mach-pxa/irq.c
index 5e95c5372fec..fa69c3a6a38e 100644
--- a/arch/arm/mach-pxa/irq.c
+++ b/arch/arm/mach-pxa/irq.c
@@ -57,7 +57,7 @@ void __init pxa_init_irq(int irq_nr, set_wake_t fn)
57 57
58 pxa_internal_irq_nr = irq_nr; 58 pxa_internal_irq_nr = irq_nr;
59 59
60 for (irq = 0; irq < irq_nr; irq += 32) { 60 for (irq = PXA_IRQ(0); irq < PXA_IRQ(irq_nr); irq += 32) {
61 _ICMR(irq) = 0; /* disable all IRQs */ 61 _ICMR(irq) = 0; /* disable all IRQs */
62 _ICLR(irq) = 0; /* all IRQs are IRQ, not FIQ */ 62 _ICLR(irq) = 0; /* all IRQs are IRQ, not FIQ */
63 } 63 }
diff --git a/arch/arm/mach-pxa/viper.c b/arch/arm/mach-pxa/viper.c
new file mode 100644
index 000000000000..d7632f63603c
--- /dev/null
+++ b/arch/arm/mach-pxa/viper.c
@@ -0,0 +1,951 @@
1/*
2 * linux/arch/arm/mach-pxa/viper.c
3 *
4 * Support for the Arcom VIPER SBC.
5 *
6 * Author: Ian Campbell
7 * Created: Feb 03, 2003
8 * Copyright: Arcom Control Systems
9 *
10 * Maintained by Marc Zyngier <maz@misterjones.org>
11 * <marc.zyngier@altran.com>
12 *
13 * Based on lubbock.c:
14 * Author: Nicolas Pitre
15 * Created: Jun 15, 2001
16 * Copyright: MontaVista Software Inc.
17 *
18 * This program is free software; you can redistribute it and/or modify
19 * it under the terms of the GNU General Public License version 2 as
20 * published by the Free Software Foundation.
21 */
22
23#include <linux/types.h>
24#include <linux/memory.h>
25#include <linux/cpu.h>
26#include <linux/cpufreq.h>
27#include <linux/delay.h>
28#include <linux/fs.h>
29#include <linux/init.h>
30#include <linux/interrupt.h>
31#include <linux/major.h>
32#include <linux/module.h>
33#include <linux/pm.h>
34#include <linux/sched.h>
35#include <linux/gpio.h>
36#include <linux/i2c-gpio.h>
37#include <linux/serial_8250.h>
38#include <linux/smc91x.h>
39#include <linux/pwm_backlight.h>
40#include <linux/usb/isp116x.h>
41#include <linux/mtd/mtd.h>
42#include <linux/mtd/partitions.h>
43#include <linux/mtd/physmap.h>
44
45#include <mach/pxa-regs.h>
46#include <mach/pxa2xx-regs.h>
47#include <mach/bitfield.h>
48#include <mach/audio.h>
49#include <mach/pxafb.h>
50#include <mach/mfp-pxa25x.h>
51#include <mach/i2c.h>
52#include <mach/viper.h>
53
54#include <asm/setup.h>
55#include <asm/mach-types.h>
56#include <asm/irq.h>
57#include <asm/sizes.h>
58
59#include <asm/mach/arch.h>
60#include <asm/mach/map.h>
61#include <asm/mach/irq.h>
62
63#include "generic.h"
64#include "devices.h"
65
66static unsigned int icr;
67
68static void viper_icr_set_bit(unsigned int bit)
69{
70 icr |= bit;
71 VIPER_ICR = icr;
72}
73
74static void viper_icr_clear_bit(unsigned int bit)
75{
76 icr &= ~bit;
77 VIPER_ICR = icr;
78}
79
80/* This function is used from the pcmcia module to reset the CF */
81void viper_cf_rst(int state)
82{
83 if (state)
84 viper_icr_set_bit(VIPER_ICR_CF_RST);
85 else
86 viper_icr_clear_bit(VIPER_ICR_CF_RST);
87}
88EXPORT_SYMBOL(viper_cf_rst);
89
90/*
91 * The CPLD version register was not present on VIPER boards prior to
92 * v2i1. On v1 boards where the version register is not present we
93 * will just read back the previous value from the databus.
94 *
95 * Therefore we do two reads. The first time we write 0 to the
96 * (read-only) register before reading and the second time we write
97 * 0xff first. If the two reads do not match or they read back as 0xff
98 * or 0x00 then we have version 1 hardware.
99 */
100static u8 viper_hw_version(void)
101{
102 u8 v1, v2;
103 unsigned long flags;
104
105 local_irq_save(flags);
106
107 VIPER_VERSION = 0;
108 v1 = VIPER_VERSION;
109 VIPER_VERSION = 0xff;
110 v2 = VIPER_VERSION;
111
112 v1 = (v1 != v2 || v1 == 0xff) ? 0 : v1;
113
114 local_irq_restore(flags);
115 return v1;
116}
117
118/* CPU sysdev */
119static int viper_cpu_suspend(struct sys_device *sysdev, pm_message_t state)
120{
121 viper_icr_set_bit(VIPER_ICR_R_DIS);
122 return 0;
123}
124
125static int viper_cpu_resume(struct sys_device *sysdev)
126{
127 viper_icr_clear_bit(VIPER_ICR_R_DIS);
128 return 0;
129}
130
131static struct sysdev_driver viper_cpu_sysdev_driver = {
132 .suspend = viper_cpu_suspend,
133 .resume = viper_cpu_resume,
134};
135
136static unsigned int current_voltage_divisor;
137
138/*
139 * If force is not true then step from existing to new divisor. If
140 * force is true then jump straight to the new divisor. Stepping is
141 * used because if the jump in voltage is too large, the VCC can dip
142 * too low and the regulator cuts out.
143 *
144 * force can be used to initialize the divisor to a know state by
145 * setting the value for the current clock speed, since we are already
146 * running at that speed we know the voltage should be pretty close so
147 * the jump won't be too large
148 */
149static void viper_set_core_cpu_voltage(unsigned long khz, int force)
150{
151 int i = 0;
152 unsigned int divisor = 0;
153 const char *v;
154
155 if (khz < 200000) {
156 v = "1.0"; divisor = 0xfff;
157 } else if (khz < 300000) {
158 v = "1.1"; divisor = 0xde5;
159 } else {
160 v = "1.3"; divisor = 0x325;
161 }
162
163 pr_debug("viper: setting CPU core voltage to %sV at %d.%03dMHz\n",
164 v, (int)khz / 1000, (int)khz % 1000);
165
166#define STEP 0x100
167 do {
168 int step;
169
170 if (force)
171 step = divisor;
172 else if (current_voltage_divisor < divisor - STEP)
173 step = current_voltage_divisor + STEP;
174 else if (current_voltage_divisor > divisor + STEP)
175 step = current_voltage_divisor - STEP;
176 else
177 step = divisor;
178 force = 0;
179
180 gpio_set_value(VIPER_PSU_CLK_GPIO, 0);
181 gpio_set_value(VIPER_PSU_nCS_LD_GPIO, 0);
182
183 for (i = 1 << 11 ; i > 0 ; i >>= 1) {
184 udelay(1);
185
186 gpio_set_value(VIPER_PSU_DATA_GPIO, step & i);
187 udelay(1);
188
189 gpio_set_value(VIPER_PSU_CLK_GPIO, 1);
190 udelay(1);
191
192 gpio_set_value(VIPER_PSU_CLK_GPIO, 0);
193 }
194 udelay(1);
195
196 gpio_set_value(VIPER_PSU_nCS_LD_GPIO, 1);
197 udelay(1);
198
199 gpio_set_value(VIPER_PSU_nCS_LD_GPIO, 0);
200
201 current_voltage_divisor = step;
202 } while (current_voltage_divisor != divisor);
203}
204
205/* Interrupt handling */
206static unsigned long viper_irq_enabled_mask;
207
208static void viper_ack_irq(unsigned int irq)
209{
210 int viper_irq = irq - PXA_ISA_IRQ(0);
211
212 if (viper_irq < 8)
213 VIPER_LO_IRQ_STATUS = 1 << viper_irq;
214 else
215 VIPER_HI_IRQ_STATUS = 1 << (viper_irq - 8);
216}
217
218static void viper_mask_irq(unsigned int irq)
219{
220 viper_irq_enabled_mask &= ~(1 << (irq - PXA_ISA_IRQ(0)));
221}
222
223static void viper_unmask_irq(unsigned int irq)
224{
225 viper_irq_enabled_mask |= (1 << (irq - PXA_ISA_IRQ(0)));
226}
227
228static inline unsigned long viper_irq_pending(void)
229{
230 return (VIPER_HI_IRQ_STATUS << 8 | VIPER_LO_IRQ_STATUS) &
231 viper_irq_enabled_mask;
232}
233
234static void viper_irq_handler(unsigned int irq, struct irq_desc *desc)
235{
236 unsigned long pending;
237
238 pending = viper_irq_pending();
239 do {
240 if (likely(pending)) {
241 irq = PXA_ISA_IRQ(0) + __ffs(pending);
242 generic_handle_irq(irq);
243 }
244 pending = viper_irq_pending();
245 } while (pending);
246}
247
248static struct irq_chip viper_irq_chip = {
249 .name = "ISA",
250 .ack = viper_ack_irq,
251 .mask = viper_mask_irq,
252 .unmask = viper_unmask_irq
253};
254
255static void __init viper_init_irq(void)
256{
257 const int isa_irqs[] = { 3, 4, 5, 6, 7, 10, 11, 12, 9, 14, 15 };
258 int irq;
259 int isa_irq;
260
261 pxa25x_init_irq();
262
263 /* setup ISA IRQs */
264 for (irq = 0; irq < ARRAY_SIZE(isa_irqs); irq++) {
265 isa_irq = isa_irqs[irq];
266 set_irq_chip(isa_irq, &viper_irq_chip);
267 set_irq_handler(isa_irq, handle_edge_irq);
268 set_irq_flags(isa_irq, IRQF_VALID | IRQF_PROBE);
269 }
270
271 set_irq_chained_handler(gpio_to_irq(VIPER_CPLD_GPIO),
272 viper_irq_handler);
273 set_irq_type(gpio_to_irq(VIPER_CPLD_GPIO), IRQ_TYPE_EDGE_BOTH);
274
275#ifndef CONFIG_SERIAL_PXA
276 /*
277 * 8250 doesn't support IRQ_TYPE being passed as part
278 * of the plat_serial8250_port structure...
279 */
280 set_irq_type(gpio_to_irq(VIPER_UARTA_GPIO), IRQ_TYPE_EDGE_RISING);
281 set_irq_type(gpio_to_irq(VIPER_UARTB_GPIO), IRQ_TYPE_EDGE_RISING);
282#endif
283}
284
285/* Flat Panel */
286static struct pxafb_mode_info fb_mode_info[] = {
287 {
288 .pixclock = 157500,
289
290 .xres = 320,
291 .yres = 240,
292
293 .bpp = 16,
294
295 .hsync_len = 63,
296 .left_margin = 7,
297 .right_margin = 13,
298
299 .vsync_len = 20,
300 .upper_margin = 0,
301 .lower_margin = 0,
302
303 .sync = 0,
304 },
305};
306
307static struct pxafb_mach_info fb_info = {
308 .modes = fb_mode_info,
309 .num_modes = 1,
310 .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
311};
312
313static int viper_backlight_init(struct device *dev)
314{
315 int ret;
316
317 /* GPIO9 and 10 control FB backlight. Initialise to off */
318 ret = gpio_request(VIPER_BCKLIGHT_EN_GPIO, "Backlight");
319 if (ret)
320 goto err_request_bckl;
321
322 ret = gpio_request(VIPER_LCD_EN_GPIO, "LCD");
323 if (ret)
324 goto err_request_lcd;
325
326 ret = gpio_direction_output(VIPER_BCKLIGHT_EN_GPIO, 0);
327 if (ret)
328 goto err_dir;
329
330 ret = gpio_direction_output(VIPER_LCD_EN_GPIO, 0);
331 if (ret)
332 goto err_dir;
333
334 return 0;
335
336err_dir:
337 gpio_free(VIPER_LCD_EN_GPIO);
338err_request_lcd:
339 gpio_free(VIPER_BCKLIGHT_EN_GPIO);
340err_request_bckl:
341 dev_err(dev, "Failed to setup LCD GPIOs\n");
342
343 return ret;
344}
345
346static int viper_backlight_notify(int brightness)
347{
348 gpio_set_value(VIPER_LCD_EN_GPIO, !!brightness);
349 gpio_set_value(VIPER_BCKLIGHT_EN_GPIO, !!brightness);
350
351 return brightness;
352}
353
354static void viper_backlight_exit(struct device *dev)
355{
356 gpio_free(VIPER_LCD_EN_GPIO);
357 gpio_free(VIPER_BCKLIGHT_EN_GPIO);
358}
359
360static struct platform_pwm_backlight_data viper_backlight_data = {
361 .pwm_id = 0,
362 .max_brightness = 100,
363 .dft_brightness = 100,
364 .pwm_period_ns = 1000000,
365 .init = viper_backlight_init,
366 .notify = viper_backlight_notify,
367 .exit = viper_backlight_exit,
368};
369
370static struct platform_device viper_backlight_device = {
371 .name = "pwm-backlight",
372 .dev = {
373 .parent = &pxa25x_device_pwm0.dev,
374 .platform_data = &viper_backlight_data,
375 },
376};
377
378/* Ethernet */
379static struct resource smc91x_resources[] = {
380 [0] = {
381 .name = "smc91x-regs",
382 .start = VIPER_ETH_PHYS + 0x300,
383 .end = VIPER_ETH_PHYS + 0x30f,
384 .flags = IORESOURCE_MEM,
385 },
386 [1] = {
387 .start = gpio_to_irq(VIPER_ETH_GPIO),
388 .end = gpio_to_irq(VIPER_ETH_GPIO),
389 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
390 },
391 [2] = {
392 .name = "smc91x-data32",
393 .start = VIPER_ETH_DATA_PHYS,
394 .end = VIPER_ETH_DATA_PHYS + 3,
395 .flags = IORESOURCE_MEM,
396 },
397};
398
399static struct smc91x_platdata viper_smc91x_info = {
400 .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
401 .leda = RPC_LED_100_10,
402 .ledb = RPC_LED_TX_RX,
403};
404
405static struct platform_device smc91x_device = {
406 .name = "smc91x",
407 .id = -1,
408 .num_resources = ARRAY_SIZE(smc91x_resources),
409 .resource = smc91x_resources,
410 .dev = {
411 .platform_data = &viper_smc91x_info,
412 },
413};
414
415/* i2c */
416static struct i2c_gpio_platform_data i2c_bus_data = {
417 .sda_pin = VIPER_RTC_I2C_SDA_GPIO,
418 .scl_pin = VIPER_RTC_I2C_SCL_GPIO,
419 .udelay = 10,
420 .timeout = 100,
421};
422
423static struct platform_device i2c_bus_device = {
424 .name = "i2c-gpio",
425 .id = 1, /* pxa2xx-i2c is bus 0, so start at 1 */
426 .dev = {
427 .platform_data = &i2c_bus_data,
428 }
429};
430
431static struct i2c_board_info __initdata viper_i2c_devices[] = {
432 {
433 I2C_BOARD_INFO("ds1338", 0x68),
434 },
435};
436
437/*
438 * Serial configuration:
439 * You can either have the standard PXA ports driven by the PXA driver,
440 * or all the ports (PXA + 16850) driven by the 8250 driver.
441 * Choose your poison.
442 */
443
444static struct resource viper_serial_resources[] = {
445#ifndef CONFIG_SERIAL_PXA
446 {
447 .start = 0x40100000,
448 .end = 0x4010001f,
449 .flags = IORESOURCE_MEM,
450 },
451 {
452 .start = 0x40200000,
453 .end = 0x4020001f,
454 .flags = IORESOURCE_MEM,
455 },
456 {
457 .start = 0x40700000,
458 .end = 0x4070001f,
459 .flags = IORESOURCE_MEM,
460 },
461 {
462 .start = VIPER_UARTA_PHYS,
463 .end = VIPER_UARTA_PHYS + 0xf,
464 .flags = IORESOURCE_MEM,
465 },
466 {
467 .start = VIPER_UARTB_PHYS,
468 .end = VIPER_UARTB_PHYS + 0xf,
469 .flags = IORESOURCE_MEM,
470 },
471#else
472 {
473 0,
474 },
475#endif
476};
477
478static struct plat_serial8250_port serial_platform_data[] = {
479#ifndef CONFIG_SERIAL_PXA
480 /* Internal UARTs */
481 {
482 .membase = (void *)&FFUART,
483 .mapbase = __PREG(FFUART),
484 .irq = IRQ_FFUART,
485 .uartclk = 921600 * 16,
486 .regshift = 2,
487 .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
488 .iotype = UPIO_MEM,
489 },
490 {
491 .membase = (void *)&BTUART,
492 .mapbase = __PREG(BTUART),
493 .irq = IRQ_BTUART,
494 .uartclk = 921600 * 16,
495 .regshift = 2,
496 .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
497 .iotype = UPIO_MEM,
498 },
499 {
500 .membase = (void *)&STUART,
501 .mapbase = __PREG(STUART),
502 .irq = IRQ_STUART,
503 .uartclk = 921600 * 16,
504 .regshift = 2,
505 .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
506 .iotype = UPIO_MEM,
507 },
508 /* External UARTs */
509 {
510 .mapbase = VIPER_UARTA_PHYS,
511 .irq = gpio_to_irq(VIPER_UARTA_GPIO),
512 .uartclk = 1843200,
513 .regshift = 1,
514 .iotype = UPIO_MEM,
515 .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP |
516 UPF_SKIP_TEST,
517 },
518 {
519 .mapbase = VIPER_UARTB_PHYS,
520 .irq = gpio_to_irq(VIPER_UARTB_GPIO),
521 .uartclk = 1843200,
522 .regshift = 1,
523 .iotype = UPIO_MEM,
524 .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP |
525 UPF_SKIP_TEST,
526 },
527#endif
528 { },
529};
530
531static struct platform_device serial_device = {
532 .name = "serial8250",
533 .id = 0,
534 .dev = {
535 .platform_data = serial_platform_data,
536 },
537 .num_resources = ARRAY_SIZE(viper_serial_resources),
538 .resource = viper_serial_resources,
539};
540
541/* USB */
542static void isp116x_delay(struct device *dev, int delay)
543{
544 ndelay(delay);
545}
546
547static struct resource isp116x_resources[] = {
548 [0] = { /* DATA */
549 .start = VIPER_USB_PHYS + 0,
550 .end = VIPER_USB_PHYS + 1,
551 .flags = IORESOURCE_MEM,
552 },
553 [1] = { /* ADDR */
554 .start = VIPER_USB_PHYS + 2,
555 .end = VIPER_USB_PHYS + 3,
556 .flags = IORESOURCE_MEM,
557 },
558 [2] = {
559 .start = gpio_to_irq(VIPER_USB_GPIO),
560 .end = gpio_to_irq(VIPER_USB_GPIO),
561 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
562 },
563};
564
565/* (DataBusWidth16|AnalogOCEnable|DREQOutputPolarity|DownstreamPort15KRSel ) */
566static struct isp116x_platform_data isp116x_platform_data = {
567 /* Enable internal resistors on downstream ports */
568 .sel15Kres = 1,
569 /* On-chip overcurrent protection */
570 .oc_enable = 1,
571 /* INT output polarity */
572 .int_act_high = 1,
573 /* INT edge or level triggered */
574 .int_edge_triggered = 0,
575
576 /* WAKEUP pin connected - NOT SUPPORTED */
577 /* .remote_wakeup_connected = 0, */
578 /* Wakeup by devices on usb bus enabled */
579 .remote_wakeup_enable = 0,
580 .delay = isp116x_delay,
581};
582
583static struct platform_device isp116x_device = {
584 .name = "isp116x-hcd",
585 .id = -1,
586 .num_resources = ARRAY_SIZE(isp116x_resources),
587 .resource = isp116x_resources,
588 .dev = {
589 .platform_data = &isp116x_platform_data,
590 },
591
592};
593
594/* MTD */
595static struct resource mtd_resources[] = {
596 [0] = { /* RedBoot config + filesystem flash */
597 .start = VIPER_FLASH_PHYS,
598 .end = VIPER_FLASH_PHYS + SZ_32M - 1,
599 .flags = IORESOURCE_MEM,
600 },
601 [1] = { /* Boot flash */
602 .start = VIPER_BOOT_PHYS,
603 .end = VIPER_BOOT_PHYS + SZ_1M - 1,
604 .flags = IORESOURCE_MEM,
605 },
606 [2] = { /*
607 * SRAM size is actually 256KB, 8bits, with a sparse mapping
608 * (each byte is on a 16bit boundary).
609 */
610 .start = _VIPER_SRAM_BASE,
611 .end = _VIPER_SRAM_BASE + SZ_512K - 1,
612 .flags = IORESOURCE_MEM,
613 },
614};
615
616static struct mtd_partition viper_boot_flash_partition = {
617 .name = "RedBoot",
618 .size = SZ_1M,
619 .offset = 0,
620 .mask_flags = MTD_WRITEABLE, /* force R/O */
621};
622
623static struct physmap_flash_data viper_flash_data[] = {
624 [0] = {
625 .width = 2,
626 .parts = NULL,
627 .nr_parts = 0,
628 },
629 [1] = {
630 .width = 2,
631 .parts = &viper_boot_flash_partition,
632 .nr_parts = 1,
633 },
634};
635
636static struct platform_device viper_mtd_devices[] = {
637 [0] = {
638 .name = "physmap-flash",
639 .id = 0,
640 .dev = {
641 .platform_data = &viper_flash_data[0],
642 },
643 .resource = &mtd_resources[0],
644 .num_resources = 1,
645 },
646 [1] = {
647 .name = "physmap-flash",
648 .id = 1,
649 .dev = {
650 .platform_data = &viper_flash_data[1],
651 },
652 .resource = &mtd_resources[1],
653 .num_resources = 1,
654 },
655};
656
657static struct platform_device *viper_devs[] __initdata = {
658 &smc91x_device,
659 &i2c_bus_device,
660 &serial_device,
661 &isp116x_device,
662 &viper_mtd_devices[0],
663 &viper_mtd_devices[1],
664 &viper_backlight_device,
665};
666
667static mfp_cfg_t viper_pin_config[] __initdata = {
668 /* Chip selects */
669 GPIO15_nCS_1,
670 GPIO78_nCS_2,
671 GPIO79_nCS_3,
672 GPIO80_nCS_4,
673 GPIO33_nCS_5,
674
675 /* FP Backlight */
676 GPIO9_GPIO, /* VIPER_BCKLIGHT_EN_GPIO */
677 GPIO10_GPIO, /* VIPER_LCD_EN_GPIO */
678 GPIO16_PWM0_OUT,
679
680 /* Ethernet PHY Ready */
681 GPIO18_RDY,
682
683 /* Serial shutdown */
684 GPIO12_GPIO | MFP_LPM_DRIVE_HIGH, /* VIPER_UART_SHDN_GPIO */
685
686 /* Compact-Flash / PC104 */
687 GPIO48_nPOE,
688 GPIO49_nPWE,
689 GPIO50_nPIOR,
690 GPIO51_nPIOW,
691 GPIO52_nPCE_1,
692 GPIO53_nPCE_2,
693 GPIO54_nPSKTSEL,
694 GPIO55_nPREG,
695 GPIO56_nPWAIT,
696 GPIO57_nIOIS16,
697 GPIO8_GPIO, /* VIPER_CF_RDY_GPIO */
698 GPIO32_GPIO, /* VIPER_CF_CD_GPIO */
699 GPIO82_GPIO, /* VIPER_CF_POWER_GPIO */
700
701 /* Integrated UPS control */
702 GPIO20_GPIO, /* VIPER_UPS_GPIO */
703
704 /* Vcc regulator control */
705 GPIO6_GPIO, /* VIPER_PSU_DATA_GPIO */
706 GPIO11_GPIO, /* VIPER_PSU_CLK_GPIO */
707 GPIO19_GPIO, /* VIPER_PSU_nCS_LD_GPIO */
708
709 /* i2c busses */
710 GPIO26_GPIO, /* VIPER_TPM_I2C_SDA_GPIO */
711 GPIO27_GPIO, /* VIPER_TPM_I2C_SCL_GPIO */
712 GPIO83_GPIO, /* VIPER_RTC_I2C_SDA_GPIO */
713 GPIO84_GPIO, /* VIPER_RTC_I2C_SCL_GPIO */
714
715 /* PC/104 Interrupt */
716 GPIO1_GPIO | WAKEUP_ON_EDGE_RISE, /* VIPER_CPLD_GPIO */
717};
718
719static unsigned long viper_tpm;
720
721static int __init viper_tpm_setup(char *str)
722{
723 strict_strtoul(str, 10, &viper_tpm);
724 return 1;
725}
726
727__setup("tpm=", viper_tpm_setup);
728
729static void __init viper_tpm_init(void)
730{
731 struct platform_device *tpm_device;
732 struct i2c_gpio_platform_data i2c_tpm_data = {
733 .sda_pin = VIPER_TPM_I2C_SDA_GPIO,
734 .scl_pin = VIPER_TPM_I2C_SCL_GPIO,
735 .udelay = 10,
736 .timeout = 100,
737 };
738 char *errstr;
739
740 /* Allocate TPM i2c bus if requested */
741 if (!viper_tpm)
742 return;
743
744 tpm_device = platform_device_alloc("i2c-gpio", 2);
745 if (tpm_device) {
746 if (!platform_device_add_data(tpm_device,
747 &i2c_tpm_data,
748 sizeof(i2c_tpm_data))) {
749 if (platform_device_add(tpm_device)) {
750 errstr = "register TPM i2c bus";
751 goto error_free_tpm;
752 }
753 } else {
754 errstr = "allocate TPM i2c bus data";
755 goto error_free_tpm;
756 }
757 } else {
758 errstr = "allocate TPM i2c device";
759 goto error_tpm;
760 }
761
762 return;
763
764error_free_tpm:
765 kfree(tpm_device);
766error_tpm:
767 pr_err("viper: Couldn't %s, giving up\n", errstr);
768}
769
770static void __init viper_init_vcore_gpios(void)
771{
772 if (gpio_request(VIPER_PSU_DATA_GPIO, "PSU data"))
773 goto err_request_data;
774
775 if (gpio_request(VIPER_PSU_CLK_GPIO, "PSU clock"))
776 goto err_request_clk;
777
778 if (gpio_request(VIPER_PSU_nCS_LD_GPIO, "PSU cs"))
779 goto err_request_cs;
780
781 if (gpio_direction_output(VIPER_PSU_DATA_GPIO, 0) ||
782 gpio_direction_output(VIPER_PSU_CLK_GPIO, 0) ||
783 gpio_direction_output(VIPER_PSU_nCS_LD_GPIO, 0))
784 goto err_dir;
785
786 /* c/should assume redboot set the correct level ??? */
787 viper_set_core_cpu_voltage(get_clk_frequency_khz(0), 1);
788
789 return;
790
791err_dir:
792 gpio_free(VIPER_PSU_nCS_LD_GPIO);
793err_request_cs:
794 gpio_free(VIPER_PSU_CLK_GPIO);
795err_request_clk:
796 gpio_free(VIPER_PSU_DATA_GPIO);
797err_request_data:
798 pr_err("viper: Failed to setup vcore control GPIOs\n");
799}
800
801static void __init viper_init_serial_gpio(void)
802{
803 if (gpio_request(VIPER_UART_SHDN_GPIO, "UARTs shutdown"))
804 goto err_request;
805
806 if (gpio_direction_output(VIPER_UART_SHDN_GPIO, 0))
807 goto err_dir;
808
809 return;
810
811err_dir:
812 gpio_free(VIPER_UART_SHDN_GPIO);
813err_request:
814 pr_err("viper: Failed to setup UART shutdown GPIO\n");
815}
816
817#ifdef CONFIG_CPU_FREQ
818static int viper_cpufreq_notifier(struct notifier_block *nb,
819 unsigned long val, void *data)
820{
821 struct cpufreq_freqs *freq = data;
822
823 /* TODO: Adjust timings??? */
824
825 switch (val) {
826 case CPUFREQ_PRECHANGE:
827 if (freq->old < freq->new) {
828 /* we are getting faster so raise the voltage
829 * before we change freq */
830 viper_set_core_cpu_voltage(freq->new, 0);
831 }
832 break;
833 case CPUFREQ_POSTCHANGE:
834 if (freq->old > freq->new) {
835 /* we are slowing down so drop the power
836 * after we change freq */
837 viper_set_core_cpu_voltage(freq->new, 0);
838 }
839 break;
840 case CPUFREQ_RESUMECHANGE:
841 viper_set_core_cpu_voltage(freq->new, 0);
842 break;
843 default:
844 /* ignore */
845 break;
846 }
847
848 return 0;
849}
850
851static struct notifier_block viper_cpufreq_notifier_block = {
852 .notifier_call = viper_cpufreq_notifier
853};
854
855static void __init viper_init_cpufreq(void)
856{
857 if (cpufreq_register_notifier(&viper_cpufreq_notifier_block,
858 CPUFREQ_TRANSITION_NOTIFIER))
859 pr_err("viper: Failed to setup cpufreq notifier\n");
860}
861#else
862static inline void viper_init_cpufreq(void) {}
863#endif
864
865static void viper_power_off(void)
866{
867 pr_notice("Shutting off UPS\n");
868 gpio_set_value(VIPER_UPS_GPIO, 1);
869 /* Spin to death... */
870 while (1);
871}
872
873static void __init viper_init(void)
874{
875 u8 version;
876
877 pm_power_off = viper_power_off;
878
879 pxa2xx_mfp_config(ARRAY_AND_SIZE(viper_pin_config));
880
881 /* Wake-up serial console */
882 viper_init_serial_gpio();
883
884 set_pxa_fb_info(&fb_info);
885
886 /* v1 hardware cannot use the datacs line */
887 version = viper_hw_version();
888 if (version == 0)
889 smc91x_device.num_resources--;
890
891 pxa_set_i2c_info(NULL);
892 platform_add_devices(viper_devs, ARRAY_SIZE(viper_devs));
893
894 viper_init_vcore_gpios();
895 viper_init_cpufreq();
896
897 sysdev_driver_register(&cpu_sysdev_class, &viper_cpu_sysdev_driver);
898
899 if (version) {
900 pr_info("viper: hardware v%di%d detected. "
901 "CPLD revision %d.\n",
902 VIPER_BOARD_VERSION(version),
903 VIPER_BOARD_ISSUE(version),
904 VIPER_CPLD_REVISION(version));
905 system_rev = (VIPER_BOARD_VERSION(version) << 8) |
906 (VIPER_BOARD_ISSUE(version) << 4) |
907 VIPER_CPLD_REVISION(version);
908 } else {
909 pr_info("viper: No version register.\n");
910 }
911
912 i2c_register_board_info(1, ARRAY_AND_SIZE(viper_i2c_devices));
913
914 viper_tpm_init();
915 pxa_set_ac97_info(NULL);
916}
917
918static struct map_desc viper_io_desc[] __initdata = {
919 {
920 .virtual = VIPER_CPLD_BASE,
921 .pfn = __phys_to_pfn(VIPER_CPLD_PHYS),
922 .length = 0x00300000,
923 .type = MT_DEVICE,
924 },
925 {
926 .virtual = VIPER_PC104IO_BASE,
927 .pfn = __phys_to_pfn(_PCMCIA1IO),
928 .length = 0x00800000,
929 .type = MT_DEVICE,
930 },
931};
932
933static void __init viper_map_io(void)
934{
935 pxa_map_io();
936
937 iotable_init(viper_io_desc, ARRAY_SIZE(viper_io_desc));
938
939 PCFR |= PCFR_OPDE;
940}
941
942MACHINE_START(VIPER, "Arcom/Eurotech VIPER SBC")
943 /* Maintainer: Marc Zyngier <maz@misterjones.org> */
944 .phys_io = 0x40000000,
945 .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
946 .boot_params = 0xa0000100,
947 .map_io = viper_map_io,
948 .init_irq = viper_init_irq,
949 .timer = &pxa_timer,
950 .init_machine = viper_init,
951MACHINE_END
diff --git a/drivers/net/smc91x.c b/drivers/net/smc91x.c
index 24768c10cadb..e332a518efe8 100644
--- a/drivers/net/smc91x.c
+++ b/drivers/net/smc91x.c
@@ -1520,7 +1520,9 @@ smc_open(struct net_device *dev)
1520 /* Setup the default Register Modes */ 1520 /* Setup the default Register Modes */
1521 lp->tcr_cur_mode = TCR_DEFAULT; 1521 lp->tcr_cur_mode = TCR_DEFAULT;
1522 lp->rcr_cur_mode = RCR_DEFAULT; 1522 lp->rcr_cur_mode = RCR_DEFAULT;
1523 lp->rpc_cur_mode = RPC_DEFAULT; 1523 lp->rpc_cur_mode = RPC_DEFAULT |
1524 lp->cfg.leda << RPC_LSXA_SHFT |
1525 lp->cfg.ledb << RPC_LSXB_SHFT;
1524 1526
1525 /* 1527 /*
1526 * If we are not using a MII interface, we need to 1528 * If we are not using a MII interface, we need to
@@ -2157,6 +2159,11 @@ static int smc_drv_probe(struct platform_device *pdev)
2157 lp->cfg.flags |= (nowait) ? SMC91X_NOWAIT : 0; 2159 lp->cfg.flags |= (nowait) ? SMC91X_NOWAIT : 0;
2158 } 2160 }
2159 2161
2162 if (!lp->cfg.leda && !lp->cfg.ledb) {
2163 lp->cfg.leda = RPC_LSA_DEFAULT;
2164 lp->cfg.ledb = RPC_LSB_DEFAULT;
2165 }
2166
2160 ndev->dma = (unsigned char)-1; 2167 ndev->dma = (unsigned char)-1;
2161 2168
2162 res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "smc91x-regs"); 2169 res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "smc91x-regs");
diff --git a/drivers/net/smc91x.h b/drivers/net/smc91x.h
index 997e7f1d5c6e..160873f0a817 100644
--- a/drivers/net/smc91x.h
+++ b/drivers/net/smc91x.h
@@ -43,7 +43,8 @@
43#if defined(CONFIG_ARCH_LUBBOCK) ||\ 43#if defined(CONFIG_ARCH_LUBBOCK) ||\
44 defined(CONFIG_MACH_MAINSTONE) ||\ 44 defined(CONFIG_MACH_MAINSTONE) ||\
45 defined(CONFIG_MACH_ZYLONITE) ||\ 45 defined(CONFIG_MACH_ZYLONITE) ||\
46 defined(CONFIG_MACH_LITTLETON) 46 defined(CONFIG_MACH_LITTLETON) ||\
47 defined(CONFIG_ARCH_VIPER)
47 48
48#include <asm/mach-types.h> 49#include <asm/mach-types.h>
49 50
@@ -778,14 +779,6 @@ smc_pxa_dma_irq(int dma, void *dummy)
778#define RPC_ANEG 0x0800 // When 1 PHY is in Auto-Negotiate Mode 779#define RPC_ANEG 0x0800 // When 1 PHY is in Auto-Negotiate Mode
779#define RPC_LSXA_SHFT 5 // Bits to shift LS2A,LS1A,LS0A to lsb 780#define RPC_LSXA_SHFT 5 // Bits to shift LS2A,LS1A,LS0A to lsb
780#define RPC_LSXB_SHFT 2 // Bits to get LS2B,LS1B,LS0B to lsb 781#define RPC_LSXB_SHFT 2 // Bits to get LS2B,LS1B,LS0B to lsb
781#define RPC_LED_100_10 (0x00) // LED = 100Mbps OR's with 10Mbps link detect
782#define RPC_LED_RES (0x01) // LED = Reserved
783#define RPC_LED_10 (0x02) // LED = 10Mbps link detect
784#define RPC_LED_FD (0x03) // LED = Full Duplex Mode
785#define RPC_LED_TX_RX (0x04) // LED = TX or RX packet occurred
786#define RPC_LED_100 (0x05) // LED = 100Mbps link dectect
787#define RPC_LED_TX (0x06) // LED = TX packet occurred
788#define RPC_LED_RX (0x07) // LED = RX packet occurred
789 782
790#ifndef RPC_LSA_DEFAULT 783#ifndef RPC_LSA_DEFAULT
791#define RPC_LSA_DEFAULT RPC_LED_100 784#define RPC_LSA_DEFAULT RPC_LED_100
@@ -794,7 +787,7 @@ smc_pxa_dma_irq(int dma, void *dummy)
794#define RPC_LSB_DEFAULT RPC_LED_FD 787#define RPC_LSB_DEFAULT RPC_LED_FD
795#endif 788#endif
796 789
797#define RPC_DEFAULT (RPC_ANEG | (RPC_LSA_DEFAULT << RPC_LSXA_SHFT) | (RPC_LSB_DEFAULT << RPC_LSXB_SHFT) | RPC_SPEED | RPC_DPLX) 790#define RPC_DEFAULT (RPC_ANEG | RPC_SPEED | RPC_DPLX)
798 791
799 792
800/* Bank 0 0x0C is reserved */ 793/* Bank 0 0x0C is reserved */
diff --git a/drivers/pcmcia/Kconfig b/drivers/pcmcia/Kconfig
index 40417d3fe50d..f57eeae3830a 100644
--- a/drivers/pcmcia/Kconfig
+++ b/drivers/pcmcia/Kconfig
@@ -220,7 +220,8 @@ config PCMCIA_PXA2XX
220 tristate "PXA2xx support" 220 tristate "PXA2xx support"
221 depends on ARM && ARCH_PXA && PCMCIA 221 depends on ARM && ARCH_PXA && PCMCIA
222 depends on (ARCH_LUBBOCK || MACH_MAINSTONE || PXA_SHARPSL \ 222 depends on (ARCH_LUBBOCK || MACH_MAINSTONE || PXA_SHARPSL \
223 || MACH_ARMCORE || ARCH_PXA_PALM || TRIZEPS_PCMCIA) 223 || MACH_ARMCORE || ARCH_PXA_PALM || TRIZEPS_PCMCIA \
224 || ARCH_VIPER)
224 help 225 help
225 Say Y here to include support for the PXA2xx PCMCIA controller 226 Say Y here to include support for the PXA2xx PCMCIA controller
226 227
diff --git a/drivers/pcmcia/Makefile b/drivers/pcmcia/Makefile
index 679ca927a62a..8c2fe94122a2 100644
--- a/drivers/pcmcia/Makefile
+++ b/drivers/pcmcia/Makefile
@@ -72,7 +72,7 @@ pxa2xx_cs-$(CONFIG_ARCH_LUBBOCK) += pxa2xx_lubbock.o sa1111_generic.o
72pxa2xx_cs-$(CONFIG_MACH_MAINSTONE) += pxa2xx_mainstone.o 72pxa2xx_cs-$(CONFIG_MACH_MAINSTONE) += pxa2xx_mainstone.o
73pxa2xx_cs-$(CONFIG_PXA_SHARPSL) += pxa2xx_sharpsl.o 73pxa2xx_cs-$(CONFIG_PXA_SHARPSL) += pxa2xx_sharpsl.o
74pxa2xx_cs-$(CONFIG_MACH_ARMCORE) += pxa2xx_cm_x2xx.o pxa2xx_cm_x255.o pxa2xx_cm_x270.o 74pxa2xx_cs-$(CONFIG_MACH_ARMCORE) += pxa2xx_cm_x2xx.o pxa2xx_cm_x255.o pxa2xx_cm_x270.o
75pxa2xx_cs-$(CONFIG_ARCH_VIPER) += pxa2xx_viper.o
75pxa2xx_cs-$(CONFIG_TRIZEPS_PCMCIA) += pxa2xx_trizeps.o 76pxa2xx_cs-$(CONFIG_TRIZEPS_PCMCIA) += pxa2xx_trizeps.o
76pxa2xx_cs-$(CONFIG_MACH_PALMTX) += pxa2xx_palmtx.o 77pxa2xx_cs-$(CONFIG_MACH_PALMTX) += pxa2xx_palmtx.o
77pxa2xx_cs-$(CONFIG_MACH_PALMLD) += pxa2xx_palmld.o 78pxa2xx_cs-$(CONFIG_MACH_PALMLD) += pxa2xx_palmld.o
78
diff --git a/drivers/pcmcia/pxa2xx_base.c b/drivers/pcmcia/pxa2xx_base.c
index 1b07af5a2ed3..13f1e0fd3f31 100644
--- a/drivers/pcmcia/pxa2xx_base.c
+++ b/drivers/pcmcia/pxa2xx_base.c
@@ -30,6 +30,7 @@
30#include <asm/system.h> 30#include <asm/system.h>
31#include <mach/pxa-regs.h> 31#include <mach/pxa-regs.h>
32#include <mach/pxa2xx-regs.h> 32#include <mach/pxa2xx-regs.h>
33#include <asm/mach-types.h>
33 34
34#include <pcmcia/cs_types.h> 35#include <pcmcia/cs_types.h>
35#include <pcmcia/ss.h> 36#include <pcmcia/ss.h>
@@ -166,18 +167,32 @@ pxa2xx_pcmcia_frequency_change(struct soc_pcmcia_socket *skt,
166} 167}
167#endif 168#endif
168 169
170static void pxa2xx_configure_sockets(struct device *dev)
171{
172 struct pcmcia_low_level *ops = dev->platform_data;
173
174 /*
175 * We have at least one socket, so set MECR:CIT
176 * (Card Is There)
177 */
178 MECR |= MECR_CIT;
179
180 /* Set MECR:NOS (Number Of Sockets) */
181 if (ops->nr > 1 || machine_is_viper())
182 MECR |= MECR_NOS;
183 else
184 MECR &= ~MECR_NOS;
185}
186
169int __pxa2xx_drv_pcmcia_probe(struct device *dev) 187int __pxa2xx_drv_pcmcia_probe(struct device *dev)
170{ 188{
171 int ret; 189 int ret;
172 struct pcmcia_low_level *ops; 190 struct pcmcia_low_level *ops;
173 int first, nr;
174 191
175 if (!dev || !dev->platform_data) 192 if (!dev || !dev->platform_data)
176 return -ENODEV; 193 return -ENODEV;
177 194
178 ops = (struct pcmcia_low_level *)dev->platform_data; 195 ops = (struct pcmcia_low_level *)dev->platform_data;
179 first = ops->first;
180 nr = ops->nr;
181 196
182 /* Provide our PXA2xx specific timing routines. */ 197 /* Provide our PXA2xx specific timing routines. */
183 ops->set_timing = pxa2xx_pcmcia_set_timing; 198 ops->set_timing = pxa2xx_pcmcia_set_timing;
@@ -185,21 +200,10 @@ int __pxa2xx_drv_pcmcia_probe(struct device *dev)
185 ops->frequency_change = pxa2xx_pcmcia_frequency_change; 200 ops->frequency_change = pxa2xx_pcmcia_frequency_change;
186#endif 201#endif
187 202
188 ret = soc_common_drv_pcmcia_probe(dev, ops, first, nr); 203 ret = soc_common_drv_pcmcia_probe(dev, ops, ops->first, ops->nr);
189 204
190 if (ret == 0) { 205 if (!ret)
191 /* 206 pxa2xx_configure_sockets(dev);
192 * We have at least one socket, so set MECR:CIT
193 * (Card Is There)
194 */
195 MECR |= MECR_CIT;
196
197 /* Set MECR:NOS (Number Of Sockets) */
198 if (nr > 1)
199 MECR |= MECR_NOS;
200 else
201 MECR &= ~MECR_NOS;
202 }
203 207
204 return ret; 208 return ret;
205} 209}
@@ -223,11 +227,7 @@ static int pxa2xx_drv_pcmcia_suspend(struct platform_device *dev, pm_message_t s
223 227
224static int pxa2xx_drv_pcmcia_resume(struct platform_device *dev) 228static int pxa2xx_drv_pcmcia_resume(struct platform_device *dev)
225{ 229{
226 struct pcmcia_low_level *ops = dev->dev.platform_data; 230 pxa2xx_configure_sockets(&dev->dev);
227 int nr = ops ? ops->nr : 0;
228
229 MECR = nr > 1 ? MECR_CIT | MECR_NOS : (nr > 0 ? MECR_CIT : 0);
230
231 return pcmcia_socket_dev_resume(&dev->dev); 231 return pcmcia_socket_dev_resume(&dev->dev);
232} 232}
233 233
diff --git a/drivers/pcmcia/pxa2xx_viper.c b/drivers/pcmcia/pxa2xx_viper.c
new file mode 100644
index 000000000000..dd10481be7bf
--- /dev/null
+++ b/drivers/pcmcia/pxa2xx_viper.c
@@ -0,0 +1,179 @@
1/*
2 * VIPER PCMCIA support
3 * Copyright 2004 Arcom Control Systems
4 *
5 * Maintained by Marc Zyngier <maz@misterjones.org>
6 * <marc.zyngier@altran.com>
7 *
8 * Based on:
9 * iPAQ h2200 PCMCIA support
10 * Copyright 2004 Koen Kooi <koen@vestingbar.nl>
11 *
12 * This file is subject to the terms and conditions of the GNU General Public
13 * License. See the file COPYING in the main directory of this archive for
14 * more details.
15 */
16
17#include <linux/module.h>
18#include <linux/init.h>
19#include <linux/kernel.h>
20#include <linux/errno.h>
21#include <linux/interrupt.h>
22#include <linux/platform_device.h>
23#include <linux/gpio.h>
24
25#include <pcmcia/ss.h>
26
27#include <asm/irq.h>
28
29#include <mach/pxa-regs.h>
30#include <mach/viper.h>
31#include <asm/mach-types.h>
32
33#include "soc_common.h"
34#include "pxa2xx_base.h"
35
36static struct pcmcia_irqs irqs[] = {
37 { 0, gpio_to_irq(VIPER_CF_CD_GPIO), "PCMCIA_CD" }
38};
39
40static int viper_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
41{
42 unsigned long flags;
43
44 skt->irq = gpio_to_irq(VIPER_CF_RDY_GPIO);
45
46 if (gpio_request(VIPER_CF_CD_GPIO, "CF detect"))
47 goto err_request_cd;
48
49 if (gpio_request(VIPER_CF_RDY_GPIO, "CF ready"))
50 goto err_request_rdy;
51
52 if (gpio_request(VIPER_CF_POWER_GPIO, "CF power"))
53 goto err_request_pwr;
54
55 local_irq_save(flags);
56
57 /* GPIO 82 is the CF power enable line. initially off */
58 if (gpio_direction_output(VIPER_CF_POWER_GPIO, 0) ||
59 gpio_direction_input(VIPER_CF_CD_GPIO) ||
60 gpio_direction_input(VIPER_CF_RDY_GPIO)) {
61 local_irq_restore(flags);
62 goto err_dir;
63 }
64
65 local_irq_restore(flags);
66
67 return soc_pcmcia_request_irqs(skt, irqs, ARRAY_SIZE(irqs));
68
69err_dir:
70 gpio_free(VIPER_CF_POWER_GPIO);
71err_request_pwr:
72 gpio_free(VIPER_CF_RDY_GPIO);
73err_request_rdy:
74 gpio_free(VIPER_CF_CD_GPIO);
75err_request_cd:
76 printk(KERN_ERR "viper: Failed to setup PCMCIA GPIOs\n");
77 return -1;
78}
79
80/*
81 * Release all resources.
82 */
83static void viper_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt)
84{
85 soc_pcmcia_free_irqs(skt, irqs, ARRAY_SIZE(irqs));
86 gpio_free(VIPER_CF_POWER_GPIO);
87 gpio_free(VIPER_CF_RDY_GPIO);
88 gpio_free(VIPER_CF_CD_GPIO);
89}
90
91static void viper_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
92 struct pcmcia_state *state)
93{
94 state->detect = gpio_get_value(VIPER_CF_CD_GPIO) ? 0 : 1;
95 state->ready = gpio_get_value(VIPER_CF_RDY_GPIO) ? 1 : 0;
96 state->bvd1 = 1;
97 state->bvd2 = 1;
98 state->wrprot = 0;
99 state->vs_3v = 1; /* Can only apply 3.3V */
100 state->vs_Xv = 0;
101}
102
103static int viper_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
104 const socket_state_t *state)
105{
106 /* Silently ignore Vpp, output enable, speaker enable. */
107 viper_cf_rst(state->flags & SS_RESET);
108
109 /* Apply socket voltage */
110 switch (state->Vcc) {
111 case 0:
112 gpio_set_value(VIPER_CF_POWER_GPIO, 0);
113 break;
114 case 33:
115 gpio_set_value(VIPER_CF_POWER_GPIO, 1);
116 break;
117 default:
118 printk(KERN_ERR "%s: Unsupported Vcc:%d\n",
119 __func__, state->Vcc);
120 return -1;
121 }
122
123 return 0;
124}
125
126static void viper_pcmcia_socket_init(struct soc_pcmcia_socket *skt)
127{
128}
129
130static void viper_pcmcia_socket_suspend(struct soc_pcmcia_socket *skt)
131{
132}
133
134static struct pcmcia_low_level viper_pcmcia_ops __initdata = {
135 .owner = THIS_MODULE,
136 .hw_init = viper_pcmcia_hw_init,
137 .hw_shutdown = viper_pcmcia_hw_shutdown,
138 .socket_state = viper_pcmcia_socket_state,
139 .configure_socket = viper_pcmcia_configure_socket,
140 .socket_init = viper_pcmcia_socket_init,
141 .socket_suspend = viper_pcmcia_socket_suspend,
142 .nr = 1,
143};
144
145static struct platform_device *viper_pcmcia_device;
146
147static int __init viper_pcmcia_init(void)
148{
149 int ret;
150
151 if (!machine_is_viper())
152 return -ENODEV;
153
154 viper_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1);
155 if (!viper_pcmcia_device)
156 return -ENOMEM;
157
158 ret = platform_device_add_data(viper_pcmcia_device,
159 &viper_pcmcia_ops,
160 sizeof(viper_pcmcia_ops));
161
162 if (!ret)
163 ret = platform_device_add(viper_pcmcia_device);
164
165 if (ret)
166 platform_device_put(viper_pcmcia_device);
167
168 return ret;
169}
170
171static void __exit viper_pcmcia_exit(void)
172{
173 platform_device_unregister(viper_pcmcia_device);
174}
175
176module_init(viper_pcmcia_init);
177module_exit(viper_pcmcia_exit);
178
179MODULE_LICENSE("GPL");
diff --git a/include/linux/smc91x.h b/include/linux/smc91x.h
index 3827b922ba1f..bc21db598c06 100644
--- a/include/linux/smc91x.h
+++ b/include/linux/smc91x.h
@@ -16,8 +16,19 @@
16 16
17#define SMC91X_USE_DMA (1 << 6) 17#define SMC91X_USE_DMA (1 << 6)
18 18
19#define RPC_LED_100_10 (0x00) /* LED = 100Mbps OR's with 10Mbps link detect */
20#define RPC_LED_RES (0x01) /* LED = Reserved */
21#define RPC_LED_10 (0x02) /* LED = 10Mbps link detect */
22#define RPC_LED_FD (0x03) /* LED = Full Duplex Mode */
23#define RPC_LED_TX_RX (0x04) /* LED = TX or RX packet occurred */
24#define RPC_LED_100 (0x05) /* LED = 100Mbps link dectect */
25#define RPC_LED_TX (0x06) /* LED = TX packet occurred */
26#define RPC_LED_RX (0x07) /* LED = RX packet occurred */
27
19struct smc91x_platdata { 28struct smc91x_platdata {
20 unsigned long flags; 29 unsigned long flags;
30 unsigned char leda;
31 unsigned char ledb;
21}; 32};
22 33
23#endif /* __SMC91X_H__ */ 34#endif /* __SMC91X_H__ */
generated by cgit v1.2.2 (git 2.25.0) at 2024-12-25 21:08:04 -0500