103 files changed, 5551 insertions, 674 deletions

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index f123c7c9fc98..919d8b92aaa4 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -121,11 +121,11 @@ config ARCH_VERSATILE
         help
           This enables support for ARM Ltd Versatile board.
 
-config ARCH_AT91RM9200
-        bool "Atmel AT91RM9200"
+config ARCH_AT91
+        bool "Atmel AT91"
         help
-          Say Y here if you intend to run this kernel on an Atmel
-          AT91RM9200-based board.
+          This enables support for systems based on the Atmel AT91RM9200
+          and AT91SAM9xxx processors.
 
 config ARCH_CLPS7500
         bool "Cirrus CL-PS7500FE"
@@ -547,7 +547,7 @@ config LEDS
                    ARCH_LUBBOCK || MACH_MAINSTONE || ARCH_NETWINDER || \
                    ARCH_OMAP || ARCH_P720T || ARCH_PXA_IDP || \
                    ARCH_SA1100 || ARCH_SHARK || ARCH_VERSATILE || \
-                   ARCH_AT91RM9200
+                   ARCH_AT91RM9200 || MACH_TRIZEPS4
         help
           If you say Y here, the LEDs on your machine will be used
           to provide useful information about your current system status.
@@ -678,7 +678,7 @@ config XIP_PHYS_ADDR
 
 endmenu
 
-if (ARCH_SA1100 || ARCH_INTEGRATOR || ARCH_OMAP1)
+if (ARCH_SA1100 || ARCH_INTEGRATOR || ARCH_OMAP)
 
 menu "CPU Frequency scaling"
 
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index a3bbaaf480b9..3345c6d0fd1e 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -114,7 +114,7 @@ endif
  machine-$(CONFIG_ARCH_H720X)      := h720x
  machine-$(CONFIG_ARCH_AAEC2000)   := aaec2000
  machine-$(CONFIG_ARCH_REALVIEW)   := realview
- machine-$(CONFIG_ARCH_AT91RM9200) := at91rm9200
+ machine-$(CONFIG_ARCH_AT91)       := at91rm9200
  machine-$(CONFIG_ARCH_EP93XX)     := ep93xx
  machine-$(CONFIG_ARCH_PNX4008)    := pnx4008
  machine-$(CONFIG_ARCH_NETX)       := netx
diff --git a/arch/arm/configs/at91rm9200dk_defconfig b/arch/arm/configs/at91rm9200dk_defconfig
index 9e1c1cceb735..4f3d8d37741e 100644
--- a/arch/arm/configs/at91rm9200dk_defconfig
+++ b/arch/arm/configs/at91rm9200dk_defconfig
@@ -103,6 +103,7 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 # CONFIG_ARCH_IMX is not set
 # CONFIG_ARCH_H720X is not set
 # CONFIG_ARCH_AAEC2000 is not set
+CONFIG_ARCH_AT91=y
 CONFIG_ARCH_AT91RM9200=y
 
 #
diff --git a/arch/arm/configs/at91rm9200ek_defconfig b/arch/arm/configs/at91rm9200ek_defconfig
index 6e0805a971d7..08b5dc38876f 100644
--- a/arch/arm/configs/at91rm9200ek_defconfig
+++ b/arch/arm/configs/at91rm9200ek_defconfig
@@ -103,6 +103,7 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 # CONFIG_ARCH_IMX is not set
 # CONFIG_ARCH_H720X is not set
 # CONFIG_ARCH_AAEC2000 is not set
+CONFIG_ARCH_AT91=y
 CONFIG_ARCH_AT91RM9200=y
 
 #
diff --git a/arch/arm/configs/ateb9200_defconfig b/arch/arm/configs/ateb9200_defconfig
index 69c39e098743..bee7813d040e 100644
--- a/arch/arm/configs/ateb9200_defconfig
+++ b/arch/arm/configs/ateb9200_defconfig
@@ -105,6 +105,7 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 # CONFIG_ARCH_IMX is not set
 # CONFIG_ARCH_H720X is not set
 # CONFIG_ARCH_AAEC2000 is not set
+CONFIG_ARCH_AT91=y
 CONFIG_ARCH_AT91RM9200=y
 
 #
diff --git a/arch/arm/configs/carmeva_defconfig b/arch/arm/configs/carmeva_defconfig
index 5ccd29a7c1fb..8a075c8ecc63 100644
--- a/arch/arm/configs/carmeva_defconfig
+++ b/arch/arm/configs/carmeva_defconfig
@@ -82,6 +82,7 @@ CONFIG_OBSOLETE_MODPARM=y
 # CONFIG_ARCH_VERSATILE is not set
 # CONFIG_ARCH_IMX is not set
 # CONFIG_ARCH_H720X is not set
+CONFIG_ARCH_AT91=y
 CONFIG_ARCH_AT91RM9200=y
 
 #
diff --git a/arch/arm/configs/csb337_defconfig b/arch/arm/configs/csb337_defconfig
index 94bd9932a402..3594155a8137 100644
--- a/arch/arm/configs/csb337_defconfig
+++ b/arch/arm/configs/csb337_defconfig
@@ -103,6 +103,7 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 # CONFIG_ARCH_IMX is not set
 # CONFIG_ARCH_H720X is not set
 # CONFIG_ARCH_AAEC2000 is not set
+CONFIG_ARCH_AT91=y
 CONFIG_ARCH_AT91RM9200=y
 
 #
diff --git a/arch/arm/configs/csb637_defconfig b/arch/arm/configs/csb637_defconfig
index 1519124c5501..640d70c1f066 100644
--- a/arch/arm/configs/csb637_defconfig
+++ b/arch/arm/configs/csb637_defconfig
@@ -103,6 +103,7 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 # CONFIG_ARCH_IMX is not set
 # CONFIG_ARCH_H720X is not set
 # CONFIG_ARCH_AAEC2000 is not set
+CONFIG_ARCH_AT91=y
 CONFIG_ARCH_AT91RM9200=y
 
 #
diff --git a/arch/arm/configs/kafa_defconfig b/arch/arm/configs/kafa_defconfig
index 51ded20e3f64..1db633e2c940 100644
--- a/arch/arm/configs/kafa_defconfig
+++ b/arch/arm/configs/kafa_defconfig
@@ -105,6 +105,7 @@ CONFIG_DEFAULT_IOSCHED="deadline"
 # CONFIG_ARCH_IMX is not set
 # CONFIG_ARCH_H720X is not set
 # CONFIG_ARCH_AAEC2000 is not set
+CONFIG_ARCH_AT91=y
 CONFIG_ARCH_AT91RM9200=y
 
 #
diff --git a/arch/arm/configs/kb9202_defconfig b/arch/arm/configs/kb9202_defconfig
index fee4f566452e..45396e087196 100644
--- a/arch/arm/configs/kb9202_defconfig
+++ b/arch/arm/configs/kb9202_defconfig
@@ -80,6 +80,7 @@ CONFIG_KMOD=y
 # CONFIG_ARCH_IMX is not set
 # CONFIG_ARCH_H720X is not set
 # CONFIG_ARCH_AAEC2000 is not set
+CONFIG_ARCH_AT91=y
 CONFIG_ARCH_AT91RM9200=y
 
 #
diff --git a/arch/arm/configs/omap_h2_1610_defconfig b/arch/arm/configs/omap_h2_1610_defconfig
index ee3ecbd9002d..05adb0b34e72 100644
--- a/arch/arm/configs/omap_h2_1610_defconfig
+++ b/arch/arm/configs/omap_h2_1610_defconfig
@@ -1,19 +1,20 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14
-# Wed Nov  9 18:53:40 2005
+# Linux kernel version: 2.6.17
+# Thu Jun 29 15:25:18 2006
 #
 CONFIG_ARM=y
 CONFIG_MMU=y
-CONFIG_UID16=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
 # Code maturity level options
 #
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_LOCK_KERNEL=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
@@ -29,26 +30,26 @@ CONFIG_SYSVIPC=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
 # CONFIG_IKCONFIG is not set
+# CONFIG_RELAY is not set
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_UID16=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 # CONFIG_EMBEDDED is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
+CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
 
 #
 # Loadable module support
@@ -56,7 +57,6 @@ CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 # CONFIG_KMOD is not set
@@ -64,6 +64,7 @@ CONFIG_OBSOLETE_MODPARM=y
 #
 # Block layer
 #
+# CONFIG_BLK_DEV_IO_TRACE is not set
 
 #
 # IO Schedulers
@@ -81,16 +82,26 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 #
 # System Type
 #
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91RM9200 is not set
 # CONFIG_ARCH_CLPS7500 is not set
 # CONFIG_ARCH_CLPS711X is not set
 # CONFIG_ARCH_CO285 is not set
 # CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
 # CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
 # CONFIG_ARCH_IOP3XX is not set
 # CONFIG_ARCH_IXP4XX is not set
 # CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP23XX is not set
 # CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_PNX4008 is not set
 # CONFIG_ARCH_PXA is not set
 # CONFIG_ARCH_RPC is not set
 # CONFIG_ARCH_SA1100 is not set
@@ -98,11 +109,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
 CONFIG_ARCH_OMAP=y
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_AAEC2000 is not set
 
 #
 # TI OMAP Implementations
@@ -141,6 +147,7 @@ CONFIG_ARCH_OMAP16XX=y
 CONFIG_MACH_OMAP_H2=y
 # CONFIG_MACH_OMAP_H3 is not set
 # CONFIG_MACH_OMAP_OSK is not set
+# CONFIG_MACH_NOKIA770 is not set
 # CONFIG_MACH_OMAP_GENERIC is not set
 
 #
@@ -177,7 +184,6 @@ CONFIG_ARM_THUMB=y
 #
 # Bus support
 #
-CONFIG_ISA_DMA_API=y
 
 #
 # PCCARD (PCMCIA/CardBus) support
@@ -189,6 +195,8 @@ CONFIG_ISA_DMA_API=y
 #
 CONFIG_PREEMPT=y
 CONFIG_NO_IDLE_HZ=y
+CONFIG_HZ=128
+# CONFIG_AEABI is not set
 # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
@@ -249,6 +257,8 @@ CONFIG_BINFMT_AOUT=y
 # Power management options
 #
 CONFIG_PM=y
+CONFIG_PM_LEGACY=y
+# CONFIG_PM_DEBUG is not set
 # CONFIG_APM is not set
 
 #
@@ -259,9 +269,12 @@ CONFIG_NET=y
 #
 # Networking options
 #
+# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
@@ -278,12 +291,18 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
 # CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_BIC=y
 # CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 
 #
@@ -295,6 +314,11 @@ CONFIG_TCP_CONG_BIC=y
 # SCTP Configuration (EXPERIMENTAL)
 #
 # CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
 # CONFIG_VLAN_8021Q is not set
@@ -312,7 +336,6 @@ CONFIG_TCP_CONG_BIC=y
 # QoS and/or fair queueing
 #
 # CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
 
 #
 # Network testing
@@ -333,6 +356,12 @@ CONFIG_TCP_CONG_BIC=y
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
+# CONFIG_SYS_HYPERVISOR is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
 
 #
 # Memory Technology Devices (MTD)
@@ -526,6 +555,7 @@ CONFIG_SERIO_SERPORT=y
 CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -534,6 +564,7 @@ CONFIG_HW_CONSOLE=y
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 # CONFIG_SERIAL_8250_EXTENDED is not set
 
 #
@@ -559,8 +590,8 @@ CONFIG_WATCHDOG_NOWAYOUT=y
 # Watchdog Device Drivers
 #
 # CONFIG_SOFT_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
 # CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 
@@ -572,6 +603,7 @@ CONFIG_WATCHDOG_NOWAYOUT=y
 #
 # TPM devices
 #
+# CONFIG_TCG_TPM is not set
 # CONFIG_TELCLOCK is not set
 
 #
@@ -580,10 +612,22 @@ CONFIG_WATCHDOG_NOWAYOUT=y
 # CONFIG_I2C is not set
 
 #
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
+# Dallas's 1-wire bus
+#
+
+#
 # Hardware Monitoring support
 #
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_F71805F is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 
 #
@@ -591,13 +635,23 @@ CONFIG_HWMON=y
 #
 
 #
-# Multimedia Capabilities Port drivers
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
 #
 
 #
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
 
 #
 # Digital Video Broadcasting Devices
@@ -607,11 +661,13 @@ CONFIG_HWMON=y
 #
 # Graphics support
 #
+CONFIG_FIRMWARE_EDID=y
 CONFIG_FB=y
 # CONFIG_FB_CFB_FILLRECT is not set
 # CONFIG_FB_CFB_COPYAREA is not set
 # CONFIG_FB_CFB_IMAGEBLIT is not set
 # CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
 CONFIG_FB_MODE_HELPERS=y
 # CONFIG_FB_TILEBLITTING is not set
 # CONFIG_FB_S1D13XXX is not set
@@ -635,7 +691,6 @@ CONFIG_FONT_8x16=y
 # CONFIG_FONT_SUN8x16 is not set
 # CONFIG_FONT_SUN12x22 is not set
 # CONFIG_FONT_10x18 is not set
-# CONFIG_FONT_RL is not set
 
 #
 # Logo configuration
@@ -660,16 +715,15 @@ CONFIG_SOUND=y
 # Open Sound System
 #
 CONFIG_SOUND_PRIME=y
-# CONFIG_OBSOLETE_OSS_DRIVER is not set
 # CONFIG_SOUND_MSNDCLAS is not set
 # CONFIG_SOUND_MSNDPIN is not set
-# CONFIG_SOUND_OSS is not set
 
 #
 # USB support
 #
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
 # CONFIG_USB is not set
 
 #
@@ -680,17 +734,6 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 # USB Gadget Support
 #
 # CONFIG_USB_GADGET is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_ETH is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
 
 #
 # MMC/SD Card support
@@ -698,20 +741,27 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_MMC is not set
 
 #
+# Real Time Clock
+#
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 CONFIG_ROMFS_FS=y
 CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
@@ -741,7 +791,7 @@ CONFIG_SYSFS=y
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
-# CONFIG_RELAYFS_FS is not set
+# CONFIG_CONFIGFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -843,10 +893,13 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
+# CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_FS is not set
 CONFIG_FRAME_POINTER=y
+# CONFIG_UNWIND_INFO is not set
 # CONFIG_DEBUG_USER is not set
 
 #
diff --git a/arch/arm/configs/onearm_defconfig b/arch/arm/configs/onearm_defconfig
index 5401c01caefe..2b4a63be03f7 100644
--- a/arch/arm/configs/onearm_defconfig
+++ b/arch/arm/configs/onearm_defconfig
@@ -85,6 +85,7 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 # CONFIG_ARCH_INTEGRATOR is not set
 # CONFIG_ARCH_REALVIEW is not set
 # CONFIG_ARCH_VERSATILE is not set
+CONFIG_ARCH_AT91=y
 CONFIG_ARCH_AT91RM9200=y
 # CONFIG_ARCH_CLPS7500 is not set
 # CONFIG_ARCH_CLPS711X is not set
diff --git a/arch/arm/configs/trizeps4_defconfig b/arch/arm/configs/trizeps4_defconfig
new file mode 100644
index 000000000000..a6698dc4f6b9
--- /dev/null
+++ b/arch/arm/configs/trizeps4_defconfig
@@ -0,0 +1,1579 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.17
+# Sat Jun 24 22:45:14 2006
+#
+CONFIG_ARM=y
+CONFIG_MMU=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_MTD_XIP=y
+CONFIG_VECTORS_BASE=0xffff0000
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+CONFIG_SYSCTL=y
+CONFIG_AUDIT=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+# CONFIG_RELAY is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_UID16=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SHMEM=y
+CONFIG_SLAB=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
+CONFIG_OBSOLETE_INTERMODULE=y
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_MODVERSIONS is not set
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+# CONFIG_BLK_DEV_IO_TRACE is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
+# System Type
+#
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_IOP3XX is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_L7200 is not set
+CONFIG_ARCH_PXA=y
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_AT91RM9200 is not set
+
+#
+# Intel PXA2xx Implementations
+#
+# CONFIG_ARCH_LUBBOCK is not set
+# CONFIG_MACH_LOGICPD_PXA270 is not set
+# CONFIG_MACH_MAINSTONE is not set
+# CONFIG_ARCH_PXA_IDP is not set
+# CONFIG_PXA_SHARPSL is not set
+CONFIG_MACH_TRIZEPS4=y
+CONFIG_MACH_TRIZEPS4_CONXS=y
+# CONFIG_MACH_TRIZEPS4_ANY is not set
+CONFIG_PXA27x=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_XSCALE=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_TLB_V4WBI=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+CONFIG_XSCALE_PMU=y
+
+#
+# Bus support
+#
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+CONFIG_PCCARD=m
+# CONFIG_PCMCIA_DEBUG is not set
+CONFIG_PCMCIA=m
+CONFIG_PCMCIA_LOAD_CIS=y
+CONFIG_PCMCIA_IOCTL=y
+
+#
+# PC-card bridges
+#
+CONFIG_PCMCIA_PXA2XX=m
+
+#
+# Kernel Features
+#
+CONFIG_PREEMPT=y
+# CONFIG_NO_IDLE_HZ is not set
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+CONFIG_LEDS=y
+CONFIG_LEDS_TIMER=y
+CONFIG_LEDS_CPU=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0
+CONFIG_ZBOOT_ROM_BSS=0
+CONFIG_CMDLINE="root=/dev/nfs ip=bootp console=ttyS0,115200n8"
+# CONFIG_XIP_KERNEL is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+CONFIG_FPE_NWFPE_XP=y
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+CONFIG_BINFMT_MISC=m
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+CONFIG_PM=y
+CONFIG_PM_LEGACY=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_APM=y
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_NETDEBUG is not set
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+
+#
+# IP: Virtual Server Configuration
+#
+# CONFIG_IP_VS is not set
+CONFIG_IPV6=m
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_IPV6_TUNNEL is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+
+#
+# Core Netfilter Configuration
+#
+# CONFIG_NETFILTER_NETLINK is not set
+# CONFIG_NETFILTER_XTABLES is not set
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_IP_NF_CONNTRACK=m
+CONFIG_IP_NF_CT_ACCT=y
+CONFIG_IP_NF_CONNTRACK_MARK=y
+# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
+# CONFIG_IP_NF_CT_PROTO_SCTP is not set
+CONFIG_IP_NF_FTP=m
+CONFIG_IP_NF_IRC=m
+# CONFIG_IP_NF_NETBIOS_NS is not set
+CONFIG_IP_NF_TFTP=m
+CONFIG_IP_NF_AMANDA=m
+# CONFIG_IP_NF_PPTP is not set
+# CONFIG_IP_NF_H323 is not set
+CONFIG_IP_NF_QUEUE=m
+
+#
+# IPv6: Netfilter Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP6_NF_QUEUE is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+CONFIG_VLAN_8021Q=m
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+CONFIG_IRDA=m
+
+#
+# IrDA protocols
+#
+CONFIG_IRLAN=m
+CONFIG_IRNET=m
+CONFIG_IRCOMM=m
+CONFIG_IRDA_ULTRA=y
+
+#
+# IrDA options
+#
+CONFIG_IRDA_CACHE_LAST_LSAP=y
+CONFIG_IRDA_FAST_RR=y
+# CONFIG_IRDA_DEBUG is not set
+
+#
+# Infrared-port device drivers
+#
+
+#
+# SIR device drivers
+#
+CONFIG_IRTTY_SIR=m
+
+#
+# Dongle support
+#
+# CONFIG_DONGLE is not set
+
+#
+# Old SIR device drivers
+#
+# CONFIG_IRPORT_SIR is not set
+
+#
+# Old Serial dongle support
+#
+
+#
+# FIR device drivers
+#
+# CONFIG_USB_IRDA is not set
+# CONFIG_SIGMATEL_FIR is not set
+# CONFIG_PXA_FICP is not set
+CONFIG_BT=m
+CONFIG_BT_L2CAP=m
+CONFIG_BT_SCO=m
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=m
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_HIDP=m
+
+#
+# Bluetooth device drivers
+#
+# CONFIG_BT_HCIUSB is not set
+# CONFIG_BT_HCIUART is not set
+# CONFIG_BT_HCIBCM203X is not set
+# CONFIG_BT_HCIBPA10X is not set
+# CONFIG_BT_HCIBFUSB is not set
+# CONFIG_BT_HCIDTL1 is not set
+# CONFIG_BT_HCIBT3C is not set
+# CONFIG_BT_HCIBLUECARD is not set
+# CONFIG_BT_HCIBTUART is not set
+# CONFIG_BT_HCIVHCI is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+CONFIG_IEEE80211_SOFTMAC=m
+# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
+CONFIG_WIRELESS_EXT=y
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=y
+CONFIG_PROC_EVENTS=y
+
+#
+# Memory Technology Devices (MTD)
+#
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_REDBOOT_PARTS=y
+CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
+CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
+CONFIG_MTD_REDBOOT_PARTS_READONLY=y
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+CONFIG_NFTL=y
+CONFIG_NFTL_RW=y
+CONFIG_INFTL=y
+# CONFIG_RFD_FTL is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+# CONFIG_MTD_CFI_NOSWAP is not set
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_LE_BYTE_SWAP=y
+CONFIG_MTD_CFI_GEOMETRY=y
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_OBSOLETE_CHIPS is not set
+# CONFIG_MTD_XIP is not set
+
+#
+# Mapping drivers for chip access
+#
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x0
+CONFIG_MTD_PHYSMAP_LEN=0x4000000
+CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+# CONFIG_MTD_TRIZEPS4 is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_IMPA7 is not set
+# CONFIG_MTD_SHARP_SL is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+CONFIG_MTD_DOC2001PLUS=y
+CONFIG_MTD_DOCPROBE=y
+CONFIG_MTD_DOCECC=y
+# CONFIG_MTD_DOCPROBE_ADVANCED is not set
+CONFIG_MTD_DOCPROBE_ADDRESS=0
+
+#
+# NAND Flash Device Drivers
+#
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_H1900 is not set
+CONFIG_MTD_NAND_IDS=y
+CONFIG_MTD_NAND_DISKONCHIP=y
+# CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED is not set
+CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0
+# CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE is not set
+# CONFIG_MTD_NAND_SHARPSL is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+
+#
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_NBD=y
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=4
+CONFIG_BLK_DEV_RAM_SIZE=4096
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_IDEDISK=y
+CONFIG_IDEDISK_MULTI_MODE=y
+CONFIG_BLK_DEV_IDECS=m
+# CONFIG_BLK_DEV_IDECD is not set
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_BLK_DEV_IDEFLOPPY is not set
+# CONFIG_BLK_DEV_IDESCSI is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+
+#
+# IDE chipset support/bugfixes
+#
+CONFIG_IDE_GENERIC=y
+CONFIG_IDE_PXA_CF=y
+CONFIG_IDE_ARM=y
+# CONFIG_BLK_DEV_IDEDMA is not set
+# CONFIG_IDEDMA_AUTO is not set
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=m
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=m
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+
+#
+# SCSI Transport Attributes
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_DEBUG is not set
+
+#
+# PCMCIA SCSI adapter support
+#
+# CONFIG_PCMCIA_AHA152X is not set
+# CONFIG_PCMCIA_FDOMAIN is not set
+# CONFIG_PCMCIA_NINJA_SCSI is not set
+# CONFIG_PCMCIA_QLOGIC is not set
+# CONFIG_PCMCIA_SYM53C500 is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# I2O device support
+#
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# PHY device support
+#
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+CONFIG_DAVICOM_PHY=y
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_SMC91X is not set
+CONFIG_DM9000=y
+
+#
+# Ethernet (1000 Mbit)
+#
+
+#
+# Ethernet (10000 Mbit)
+#
+
+#
+# Token Ring devices
+#
+
+#
+# Wireless LAN (non-hamradio)
+#
+CONFIG_NET_RADIO=y
+# CONFIG_NET_WIRELESS_RTNETLINK is not set
+
+#
+# Obsolete Wireless cards support (pre-802.11)
+#
+# CONFIG_STRIP is not set
+# CONFIG_PCMCIA_WAVELAN is not set
+# CONFIG_PCMCIA_NETWAVE is not set
+
+#
+# Wireless 802.11 Frequency Hopping cards support
+#
+# CONFIG_PCMCIA_RAYCS is not set
+
+#
+# Wireless 802.11b ISA/PCI cards support
+#
+CONFIG_HERMES=m
+# CONFIG_ATMEL is not set
+
+#
+# Wireless 802.11b Pcmcia/Cardbus cards support
+#
+CONFIG_PCMCIA_HERMES=m
+# CONFIG_PCMCIA_SPECTRUM is not set
+CONFIG_AIRO_CS=m
+# CONFIG_PCMCIA_WL3501 is not set
+CONFIG_HOSTAP=m
+CONFIG_HOSTAP_FIRMWARE=y
+CONFIG_HOSTAP_FIRMWARE_NVRAM=y
+CONFIG_HOSTAP_CS=m
+CONFIG_NET_WIRELESS=y
+
+#
+# PCMCIA network device support
+#
+# CONFIG_NET_PCMCIA is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+CONFIG_PPP=m
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_MPPE=m
+# CONFIG_PPPOE is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=640
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_TSDEV=y
+CONFIG_INPUT_TSDEV_SCREEN_X=640
+CONFIG_INPUT_TSDEV_SCREEN_Y=480
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+CONFIG_INPUT_MOUSE=y
+# CONFIG_MOUSE_PS2 is not set
+CONFIG_MOUSE_SERIAL=y
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_INPUT_JOYSTICK is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_ADS7846 is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_UINPUT=m
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_PXA=y
+CONFIG_SERIAL_PXA_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_SA1100_WATCHDOG=y
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+# CONFIG_NVRAM is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+
+#
+# PCMCIA character devices
+#
+# CONFIG_SYNCLINK_CS is not set
+# CONFIG_CARDMAN_4000 is not set
+# CONFIG_CARDMAN_4040 is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
+
+#
+# I2C support
+#
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+CONFIG_I2C_PXA=y
+CONFIG_I2C_PXA_SLAVE=y
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_PCA_ISA is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+CONFIG_SENSORS_EEPROM=m
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+CONFIG_SPI_PXA2XX=m
+
+#
+# SPI Protocol Masters
+#
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_FSCHER is not set
+# CONFIG_SENSORS_FSCPOS is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Misc devices
+#
+
+#
+# Multimedia Capabilities Port drivers
+#
+CONFIG_UCB1400=y
+CONFIG_UCB1400_TS=y
+
+#
+# LED devices
+#
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_IDE_DISK=y
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+# CONFIG_USB_DABUSB is not set
+
+#
+# Graphics support
+#
+CONFIG_FB=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_MACMODES is not set
+CONFIG_FB_FIRMWARE_EDID=y
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_PXA=y
+# CONFIG_FB_PXA_PARAMETERS is not set
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+
+#
+# Logo configuration
+#
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_DEVICE=y
+CONFIG_LCD_CLASS_DEVICE=y
+CONFIG_LCD_DEVICE=y
+
+#
+# Sound
+#
+CONFIG_SOUND=y
+
+#
+# Advanced Linux Sound Architecture
+#
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+CONFIG_SND_HWDEP=m
+CONFIG_SND_RAWMIDI=m
+CONFIG_SND_SEQUENCER=m
+# CONFIG_SND_SEQ_DUMMY is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_SEQUENCER_OSS is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+CONFIG_SND_VERBOSE_PRINTK=y
+# CONFIG_SND_DEBUG is not set
+
+#
+# Generic devices
+#
+CONFIG_SND_AC97_CODEC=y
+CONFIG_SND_AC97_BUS=y
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_VIRMIDI is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+
+#
+# ALSA ARM devices
+#
+CONFIG_SND_PXA2XX_PCM=y
+CONFIG_SND_PXA2XX_AC97=y
+
+#
+# USB devices
+#
+CONFIG_SND_USB_AUDIO=m
+
+#
+# PCMCIA devices
+#
+# CONFIG_SND_VXPOCKET is not set
+# CONFIG_SND_PDAUDIOCF is not set
+
+#
+# Open Sound System
+#
+# CONFIG_SOUND_PRIME is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_BANDWIDTH is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=m
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=m
+CONFIG_USB_HIDINPUT=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+# CONFIG_USB_AIPTEK is not set
+# CONFIG_USB_WACOM is not set
+# CONFIG_USB_ACECAD is not set
+# CONFIG_USB_KBTAB is not set
+# CONFIG_USB_POWERMATE is not set
+CONFIG_USB_TOUCHSCREEN=m
+# CONFIG_USB_TOUCHSCREEN_EGALAX is not set
+# CONFIG_USB_TOUCHSCREEN_PANJIT is not set
+# CONFIG_USB_TOUCHSCREEN_3M is not set
+# CONFIG_USB_TOUCHSCREEN_ITM is not set
+# CONFIG_USB_YEALINK is not set
+# CONFIG_USB_XPAD is not set
+# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_ATI_REMOTE2 is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_USB_ZD1201 is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGETKIT is not set
+# CONFIG_USB_PHIDGETSERVO is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_PXA2XX is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_AT91 is not set
+CONFIG_USB_GADGET_DUMMY_HCD=y
+CONFIG_USB_DUMMY_HCD=y
+CONFIG_USB_GADGET_DUALSPEED=y
+# CONFIG_USB_ZERO is not set
+CONFIG_USB_ETH=m
+CONFIG_USB_ETH_RNDIS=y
+CONFIG_USB_GADGETFS=m
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+CONFIG_USB_G_SERIAL=m
+
+#
+# MMC/SD Card support
+#
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_PXA=y
+
+#
+# Real Time Clock
+#
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+
+#
+# RTC drivers
+#
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+CONFIG_RTC_DRV_SA1100=y
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+CONFIG_AUTOFS4_FS=y
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-15"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS_FS=y
+CONFIG_JFFS_FS_VERBOSE=0
+CONFIG_JFFS_PROC_FS=y
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_SUMMARY is not set
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_JFFS2_CMODE_NONE is not set
+CONFIG_JFFS2_CMODE_PRIORITY=y
+# CONFIG_JFFS2_CMODE_SIZE is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+# CONFIG_NFS_DIRECTIO is not set
+CONFIG_NFSD=y
+CONFIG_NFSD_V2_ACL=y
+CONFIG_NFSD_V3=y
+CONFIG_NFSD_V3_ACL=y
+CONFIG_NFSD_V4=y
+CONFIG_NFSD_TCP=y
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=y
+CONFIG_NFS_ACL_SUPPORT=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=m
+# CONFIG_SMB_NLS_DEFAULT is not set
+CONFIG_CIFS=m
+# CONFIG_CIFS_STATS is not set
+# CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+CONFIG_LDM_PARTITION=y
+# CONFIG_LDM_DEBUG is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-15"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=y
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=m
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+CONFIG_NLS_ISO8859_15=m
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=m
+
+#
+# Profiling support
+#
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=y
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_FS is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_UNWIND_INFO is not set
+CONFIG_DEBUG_USER=y
+
+#
+# Security options
+#
+CONFIG_KEYS=y
+CONFIG_KEYS_DEBUG_PROC_KEYS=y
+CONFIG_SECURITY=y
+# CONFIG_SECURITY_NETWORK is not set
+CONFIG_SECURITY_CAPABILITIES=y
+# CONFIG_SECURITY_ROOTPLUG is not set
+# CONFIG_SECURITY_SECLVL is not set
+
+#
+# Cryptographic options
+#
+CONFIG_CRYPTO=y
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_MD4=y
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+CONFIG_CRYPTO_AES=m
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+CONFIG_CRYPTO_ARC4=m
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Hardware crypto devices
+#
+
+#
+# Library routines
+#
+CONFIG_CRC_CCITT=y
+CONFIG_CRC16=y
+CONFIG_CRC32=y
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_REED_SOLOMON=y
+CONFIG_REED_SOLOMON_DEC16=y
diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile
index 7cffbaef064b..f0c0cdb1c183 100644
--- a/arch/arm/kernel/Makefile
+++ b/arch/arm/kernel/Makefile
@@ -25,7 +25,7 @@ obj-$(CONFIG_OABI_COMPAT)	+= sys_oabi-compat.o
 obj-$(CONFIG_CRUNCH)            += crunch.o crunch-bits.o
 AFLAGS_crunch-bits.o            := -Wa,-mcpu=ep9312
 
-obj-$(CONFIG_IWMMXT)            += iwmmxt.o
+obj-$(CONFIG_IWMMXT)            += iwmmxt.o iwmmxt-notifier.o
 AFLAGS_iwmmxt.o                 := -Wa,-mcpu=iwmmxt
 
 ifneq ($(CONFIG_ARCH_EBSA110),y)
diff --git a/arch/arm/kernel/asm-offsets.c b/arch/arm/kernel/asm-offsets.c
index 447ede5143a8..cc2d58d028e1 100644
--- a/arch/arm/kernel/asm-offsets.c
+++ b/arch/arm/kernel/asm-offsets.c
@@ -105,6 +105,7 @@ int main(void)
   BLANK();
   DEFINE(PROC_INFO_SZ,          sizeof(struct proc_info_list));
   DEFINE(PROCINFO_INITFUNC,     offsetof(struct proc_info_list, __cpu_flush));
-  DEFINE(PROCINFO_MMUFLAGS,     offsetof(struct proc_info_list, __cpu_mmu_flags));
+  DEFINE(PROCINFO_MM_MMUFLAGS,  offsetof(struct proc_info_list, __cpu_mm_mmu_flags));
+  DEFINE(PROCINFO_IO_MMUFLAGS,  offsetof(struct proc_info_list, __cpu_io_mmu_flags));
   return 0; 
 }
diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S
index 6423a38839b8..0e8aeaf9ff1d 100644
--- a/arch/arm/kernel/entry-armv.S
+++ b/arch/arm/kernel/entry-armv.S
@@ -590,9 +590,7 @@ ENTRY(__switch_to)
 #ifdef CONFIG_MMU
         mcr     p15, 0, r6, c3, c0, 0           @ Set domain register
 #endif
-#if defined(CONFIG_IWMMXT)
-        bl      iwmmxt_task_switch
-#elif defined(CONFIG_CPU_XSCALE)
+#if defined(CONFIG_CPU_XSCALE) && !defined(CONFIG_IWMMXT)
         add     r4, r2, #TI_CPU_DOMAIN + 40     @ cpu_context_save->extra
         ldmib   r4, {r4, r5}
         mar     acc0, r4, r5
diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S
index 330b9476c398..81cb902c487c 100644
--- a/arch/arm/kernel/head.S
+++ b/arch/arm/kernel/head.S
@@ -221,7 +221,7 @@ __create_page_tables:
         teq     r0, r6
         bne     1b
 
-        ldr     r7, [r10, #PROCINFO_MMUFLAGS]   @ mmuflags
+        ldr     r7, [r10, #PROCINFO_MM_MMUFLAGS] @ mm_mmuflags
 
         /*
          * Create identity mapping for first MB of kernel to
@@ -272,8 +272,7 @@ __create_page_tables:
 #endif
 
 #ifdef CONFIG_DEBUG_LL
-        bic     r7, r7, #0x0c                   @ turn off cacheable
-                                                @ and bufferable bits
+        ldr     r7, [r10, #PROCINFO_IO_MMUFLAGS] @ io_mmuflags
         /*
          * Map in IO space for serial debugging.
          * This allows debug messages to be output
diff --git a/arch/arm/kernel/iwmmxt-notifier.c b/arch/arm/kernel/iwmmxt-notifier.c
new file mode 100644
index 000000000000..44a86c33796e
--- /dev/null
+++ b/arch/arm/kernel/iwmmxt-notifier.c
@@ -0,0 +1,64 @@
+/*
+ *  linux/arch/arm/kernel/iwmmxt-notifier.c
+ *
+ *  XScale iWMMXt (Concan) context switching and handling
+ *
+ *  Initial code:
+ *  Copyright (c) 2003, Intel Corporation
+ *
+ *  Full lazy switching support, optimizations and more, by Nicolas Pitre
+ *  Copyright (c) 2003-2004, MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/config.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+#include <asm/thread_notify.h>
+#include <asm/io.h>
+
+static int iwmmxt_do(struct notifier_block *self, unsigned long cmd, void *t)
+{
+        struct thread_info *thread = t;
+
+        switch (cmd) {
+        case THREAD_NOTIFY_FLUSH:
+                /*
+                 * flush_thread() zeroes thread->fpstate, so no need
+                 * to do anything here.
+                 *
+                 * FALLTHROUGH: Ensure we don't try to overwrite our newly
+                 * initialised state information on the first fault.
+                 */
+
+        case THREAD_NOTIFY_RELEASE:
+                iwmmxt_task_release(thread);
+                break;
+
+        case THREAD_NOTIFY_SWITCH:
+                iwmmxt_task_switch(thread);
+                break;
+        }
+
+        return NOTIFY_DONE;
+}
+
+static struct notifier_block iwmmxt_notifier_block = {
+        .notifier_call  = iwmmxt_do,
+};
+
+static int __init iwmmxt_init(void)
+{
+        thread_register_notifier(&iwmmxt_notifier_block);
+
+        return 0;
+}
+
+late_initcall(iwmmxt_init);
diff --git a/arch/arm/kernel/iwmmxt.S b/arch/arm/kernel/iwmmxt.S
index a3bae95e536c..b63b528f22a6 100644
--- a/arch/arm/kernel/iwmmxt.S
+++ b/arch/arm/kernel/iwmmxt.S
@@ -271,30 +271,27 @@ ENTRY(iwmmxt_task_restore)
 /*
  * Concan handling on task switch
  *
- * r0 = previous task_struct pointer (must be preserved)
- * r1 = previous thread_info pointer
- * r2 = next thread_info pointer (must be preserved)
+ * r0 = next thread_info pointer
  *
- * Called only from __switch_to with task preemption disabled.
- * No need to care about preserving r4 and above.
+ * Called only from the iwmmxt notifier with task preemption disabled.
  */
 ENTRY(iwmmxt_task_switch)
 
-        mrc     p15, 0, r4, c15, c1, 0
-        tst     r4, #0x3                        @ CP0 and CP1 accessible?
+        mrc     p15, 0, r1, c15, c1, 0
+        tst     r1, #0x3                        @ CP0 and CP1 accessible?
         bne     1f                              @ yes: block them for next task
 
-        ldr     r5, =concan_owner
-        add     r6, r2, #TI_IWMMXT_STATE        @ get next task Concan save area
-        ldr     r5, [r5]                        @ get current Concan owner
-        teq     r5, r6                          @ next task owns it?
+        ldr     r2, =concan_owner
+        add     r3, r0, #TI_IWMMXT_STATE        @ get next task Concan save area
+        ldr     r2, [r2]                        @ get current Concan owner
+        teq     r2, r3                          @ next task owns it?
         movne   pc, lr                          @ no: leave Concan disabled
 
-1:      eor     r4, r4, #3                      @ flip Concan access
-        mcr     p15, 0, r4, c15, c1, 0
+1:      eor     r1, r1, #3                      @ flip Concan access
+        mcr     p15, 0, r1, c15, c1, 0
 
-        mrc     p15, 0, r4, c2, c0, 0
-        sub     pc, lr, r4, lsr #32             @ cpwait and return
+        mrc     p15, 0, r1, c2, c0, 0
+        sub     pc, lr, r1, lsr #32             @ cpwait and return
 
 /*
  * Remove Concan ownership of given task
diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c
index e1c77ee885a7..b5773a2549ee 100644
--- a/arch/arm/kernel/process.c
+++ b/arch/arm/kernel/process.c
@@ -353,9 +353,6 @@ void flush_thread(void)
         memset(&thread->fpstate, 0, sizeof(union fp_state));
 
         thread_notify(THREAD_NOTIFY_FLUSH, thread);
-#if defined(CONFIG_IWMMXT)
-        iwmmxt_task_release(thread);
-#endif
 }
 
 void release_thread(struct task_struct *dead_task)
@@ -363,9 +360,6 @@ void release_thread(struct task_struct *dead_task)
         struct thread_info *thread = task_thread_info(dead_task);
 
         thread_notify(THREAD_NOTIFY_RELEASE, thread);
-#if defined(CONFIG_IWMMXT)
-        iwmmxt_task_release(thread);
-#endif
 }
 
 asmlinkage void ret_from_fork(void) __asm__("ret_from_fork");
diff --git a/arch/arm/mach-at91rm9200/Kconfig b/arch/arm/mach-at91rm9200/Kconfig
index 70d402f76ce5..2f85e8693b1b 100644
--- a/arch/arm/mach-at91rm9200/Kconfig
+++ b/arch/arm/mach-at91rm9200/Kconfig
@@ -1,6 +1,21 @@
-if ARCH_AT91RM9200
+if ARCH_AT91
+
+menu "Atmel AT91 System-on-Chip"
+
+comment "Atmel AT91 Processors"
+
+config ARCH_AT91RM9200
+        bool "AT91RM9200"
 
-menu "AT91RM9200 Implementations"
+config ARCH_AT91SAM9260
+        bool "AT91SAM9260"
+
+config ARCH_AT91SAM9261
+        bool "AT91SAM9261"
+
+# ----------------------------------------------------------
+
+if ARCH_AT91RM9200
 
 comment "AT91RM9200 Board Type"
 
@@ -8,58 +23,87 @@ config MACH_ONEARM
         bool "Ajeco 1ARM Single Board Computer"
         depends on ARCH_AT91RM9200
         help
-          Select this if you are using Ajeco's 1ARM Single Board Computer
+          Select this if you are using Ajeco's 1ARM Single Board Computer.
+          <http://www.ajeco.fi/products.htm>
 
 config ARCH_AT91RM9200DK
         bool "Atmel AT91RM9200-DK Development board"
         depends on ARCH_AT91RM9200
         help
-          Select this if you are using Atmel's AT91RM9200-DK Development board
+          Select this if you are using Atmel's AT91RM9200-DK Development board.
+          (Discontinued)
+
 
 config MACH_AT91RM9200EK
         bool "Atmel AT91RM9200-EK Evaluation Kit"
         depends on ARCH_AT91RM9200
         help
-          Select this if you are using Atmel's AT91RM9200-EK Evaluation Kit
+          Select this if you are using Atmel's AT91RM9200-EK Evaluation Kit.
+          <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3507>
 
 config MACH_CSB337
-        bool "Cogent CSB337 board"
+        bool "Cogent CSB337"
         depends on ARCH_AT91RM9200
         help
-          Select this if you are using Cogent's CSB337 board
+          Select this if you are using Cogent's CSB337 board.
+          <http://www.cogcomp.com/csb_csb337.htm>
 
 config MACH_CSB637
-        bool "Cogent CSB637 board"
+        bool "Cogent CSB637"
         depends on ARCH_AT91RM9200
         help
-          Select this if you are using Cogent's CSB637 board
+          Select this if you are using Cogent's CSB637 board.
+          <http://www.cogcomp.com/csb_csb637.htm>
 
 config MACH_CARMEVA
-        bool "Conitec's ARM&EVA"
+        bool "Conitec ARM&EVA"
         depends on ARCH_AT91RM9200
         help
-          Select this if you are using Conitec's AT91RM9200-MCU-Module
+          Select this if you are using Conitec's AT91RM9200-MCU-Module.
+          <http://www.conitec.net/english/linuxboard.htm>
 
-config MACH_KB9200
-        bool "KwikByte's KB920x"
+config MACH_ATEB9200
+        bool "Embest ATEB9200"
         depends on ARCH_AT91RM9200
         help
-          Select this if you are using KwikByte's KB920x board
+          Select this if you are using Embest's ATEB9200 board.
+          <http://www.embedinfo.com/english/product/ATEB9200.asp>
 
-config MACH_ATEB9200
-        bool "Embest's ATEB9200"
+config MACH_KB9200
+        bool "KwikByte KB920x"
         depends on ARCH_AT91RM9200
         help
-          Select this if you are using Embest's ATEB9200 board
+          Select this if you are using KwikByte's KB920x board.
+          <http://kwikbyte.com/KB9202_description_new.htm>
 
 config MACH_KAFA
         bool "Sperry-Sun KAFA board"
         depends on ARCH_AT91RM9200
         help
-          Select this if you are using Sperry-Sun's KAFA board
+          Select this if you are using Sperry-Sun's KAFA board.
+
+endif
+
+# ----------------------------------------------------------
+
+if ARCH_AT91SAM9260
+
+comment "AT91SAM9260 Board Type"
+
+endif
+
+# ----------------------------------------------------------
+
+if ARCH_AT91SAM9261
+
+comment "AT91SAM9261 Board Type"
+
+endif
+
 
+# ----------------------------------------------------------
 
-comment "AT91RM9200 Feature Selections"
+comment "AT91 Feature Selections"
 
 config AT91_PROGRAMMABLE_CLOCKS
         bool "Programmable Clocks"
diff --git a/arch/arm/mach-at91rm9200/Makefile b/arch/arm/mach-at91rm9200/Makefile
index 82db957322df..c174805c24e5 100644
--- a/arch/arm/mach-at91rm9200/Makefile
+++ b/arch/arm/mach-at91rm9200/Makefile
@@ -2,14 +2,19 @@
 # Makefile for the linux kernel.
 #
 
-obj-y           := clock.o irq.o time.o gpio.o common.o devices.o
+obj-y           := clock.o irq.o gpio.o devices.o
 obj-m           :=
 obj-n           :=
 obj-            :=
 
 obj-$(CONFIG_PM)                += pm.o
 
-# Board-specific support
+# CPU-specific support
+obj-$(CONFIG_ARCH_AT91RM9200)   += at91rm9200.o at91rm9200_time.o
+obj-$(CONFIG_ARCH_AT91SAM9260)  +=
+obj-$(CONFIG_ARCH_AT91SAM9261)  +=
+
+# AT91RM9200 Board-specific support
 obj-$(CONFIG_MACH_ONEARM)       += board-1arm.o
 obj-$(CONFIG_ARCH_AT91RM9200DK) += board-dk.o
 obj-$(CONFIG_MACH_AT91RM9200EK) += board-ek.o
@@ -20,6 +25,10 @@ obj-$(CONFIG_MACH_KB9200)	+= board-kb9202.o
 obj-$(CONFIG_MACH_ATEB9200)     += board-eb9200.o
 obj-$(CONFIG_MACH_KAFA)         += board-kafa.o
 
+# AT91SAM9260 board-specific support
+
+# AT91SAM9261 board-specific support
+
 # LEDs support
 led-$(CONFIG_ARCH_AT91RM9200DK) += leds.o
 led-$(CONFIG_MACH_AT91RM9200EK) += leds.o
diff --git a/arch/arm/mach-at91rm9200/common.c b/arch/arm/mach-at91rm9200/at91rm9200.c
index e836f8537a1d..90f08d383889 100644
--- a/arch/arm/mach-at91rm9200/common.c
+++ b/arch/arm/mach-at91rm9200/at91rm9200.c
@@ -1,5 +1,5 @@
 /*
- * arch/arm/mach-at91rm9200/common.c
+ * arch/arm/mach-at91rm9200/at91rm9200.c
  *
  *  Copyright (C) 2005 SAN People
  *
diff --git a/arch/arm/mach-at91rm9200/time.c b/arch/arm/mach-at91rm9200/at91rm9200_time.c
index fc2d7d5e4637..1077fb85c411 100644
--- a/arch/arm/mach-at91rm9200/time.c
+++ b/arch/arm/mach-at91rm9200/at91rm9200_time.c
@@ -1,5 +1,5 @@
 /*
- * linux/arch/arm/mach-at91rm9200/time.c
+ * linux/arch/arm/mach-at91rm9200/at91rm9200_time.c
  *
  *  Copyright (C) 2003 SAN People
  *  Copyright (C) 2003 ATMEL
diff --git a/arch/arm/mach-ep93xx/Kconfig b/arch/arm/mach-ep93xx/Kconfig
index e15e4c54a253..f1b740083aee 100644
--- a/arch/arm/mach-ep93xx/Kconfig
+++ b/arch/arm/mach-ep93xx/Kconfig
@@ -9,12 +9,24 @@ config CRUNCH
 
 comment "EP93xx Platforms"
 
+config MACH_EDB9302
+        bool "Support Cirrus Logic EDB9302"
+        help
+          Say 'Y' here if you want your kernel to support the Cirrus
+          Logic EDB9302 Evaluation Board.
+
 config MACH_EDB9315
         bool "Support Cirrus Logic EDB9315"
         help
           Say 'Y' here if you want your kernel to support the Cirrus
           Logic EDB9315 Evaluation Board.
 
+config MACH_EDB9315A
+        bool "Support Cirrus Logic EDB9315A"
+        help
+          Say 'Y' here if you want your kernel to support the Cirrus
+          Logic EDB9315A Evaluation Board.
+
 config MACH_GESBC9312
         bool "Support Glomation GESBC-9312-sx"
         help
diff --git a/arch/arm/mach-ep93xx/Makefile b/arch/arm/mach-ep93xx/Makefile
index dfa7e2e8a18b..1f5a6b0487ee 100644
--- a/arch/arm/mach-ep93xx/Makefile
+++ b/arch/arm/mach-ep93xx/Makefile
@@ -6,6 +6,8 @@ obj-m			:=
 obj-n                   :=
 obj-                    :=
 
+obj-$(CONFIG_MACH_EDB9302)      += edb9302.o
 obj-$(CONFIG_MACH_EDB9315)      += edb9315.o
+obj-$(CONFIG_MACH_EDB9315A)     += edb9315a.o
 obj-$(CONFIG_MACH_GESBC9312)    += gesbc9312.o
 obj-$(CONFIG_MACH_TS72XX)       += ts72xx.o
diff --git a/arch/arm/mach-ep93xx/edb9302.c b/arch/arm/mach-ep93xx/edb9302.c
new file mode 100644
index 000000000000..62a8efd23256
--- /dev/null
+++ b/arch/arm/mach-ep93xx/edb9302.c
@@ -0,0 +1,62 @@
+/*
+ * arch/arm/mach-ep93xx/edb9302.c
+ * Cirrus Logic EDB9302 support.
+ *
+ * Copyright (C) 2006 George Kashperko <george@chas.com.ua>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/mtd/physmap.h>
+#include <linux/platform_device.h>
+#include <asm/io.h>
+#include <asm/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+static struct physmap_flash_data edb9302_flash_data = {
+        .width          = 2,
+};
+
+static struct resource edb9302_flash_resource = {
+        .start          = 0x60000000,
+        .end            = 0x60ffffff,
+        .flags          = IORESOURCE_MEM,
+};
+
+static struct platform_device edb9302_flash = {
+        .name           = "physmap-flash",
+        .id             = 0,
+        .dev            = {
+                .platform_data  = &edb9302_flash_data,
+        },
+        .num_resources  = 1,
+        .resource       = &edb9302_flash_resource,
+};
+
+static void __init edb9302_init_machine(void)
+{
+        ep93xx_init_devices();
+        platform_device_register(&edb9302_flash);
+}
+
+MACHINE_START(EDB9302, "Cirrus Logic EDB9302 Evaluation Board")
+        /* Maintainer: George Kashperko <george@chas.com.ua> */
+        .phys_io        = EP93XX_APB_PHYS_BASE,
+        .io_pg_offst    = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
+        .boot_params    = 0x00000100,
+        .map_io         = ep93xx_map_io,
+        .init_irq       = ep93xx_init_irq,
+        .timer          = &ep93xx_timer,
+        .init_machine   = edb9302_init_machine,
+MACHINE_END
diff --git a/arch/arm/mach-ep93xx/edb9315a.c b/arch/arm/mach-ep93xx/edb9315a.c
new file mode 100644
index 000000000000..bfefdaa8f794
--- /dev/null
+++ b/arch/arm/mach-ep93xx/edb9315a.c
@@ -0,0 +1,62 @@
+/*
+ * arch/arm/mach-ep93xx/edb9315a.c
+ * Cirrus Logic EDB9315A support.
+ *
+ * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/mtd/physmap.h>
+#include <linux/platform_device.h>
+#include <asm/io.h>
+#include <asm/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+static struct physmap_flash_data edb9315a_flash_data = {
+        .width          = 2,
+};
+
+static struct resource edb9315a_flash_resource = {
+        .start          = 0x60000000,
+        .end            = 0x60ffffff,
+        .flags          = IORESOURCE_MEM,
+};
+
+static struct platform_device edb9315a_flash = {
+        .name           = "physmap-flash",
+        .id             = 0,
+        .dev            = {
+                .platform_data  = &edb9315a_flash_data,
+        },
+        .num_resources  = 1,
+        .resource       = &edb9315a_flash_resource,
+};
+
+static void __init edb9315a_init_machine(void)
+{
+        ep93xx_init_devices();
+        platform_device_register(&edb9315a_flash);
+}
+
+MACHINE_START(EDB9315A, "Cirrus Logic EDB9315A Evaluation Board")
+        /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
+        .phys_io        = EP93XX_APB_PHYS_BASE,
+        .io_pg_offst    = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
+        .boot_params    = 0xc0000100,
+        .map_io         = ep93xx_map_io,
+        .init_irq       = ep93xx_init_irq,
+        .timer          = &ep93xx_timer,
+        .init_machine   = edb9315a_init_machine,
+MACHINE_END
diff --git a/arch/arm/mach-iop3xx/Kconfig b/arch/arm/mach-iop3xx/Kconfig
index 2bfe8c729f9f..4422f2388607 100644
--- a/arch/arm/mach-iop3xx/Kconfig
+++ b/arch/arm/mach-iop3xx/Kconfig
@@ -30,12 +30,15 @@ config MACH_IQ80332
         select ARCH_IOP331
         help
           Say Y here if you want to run your kernel on the Intel IQ80332
-          evaluation kit for the IOP332 chipset
+          evaluation kit for the IOP332 chipset.
 
 config ARCH_EP80219
-    bool "Enable support for EP80219"
-    select ARCH_IOP321
-    select ARCH_IQ31244
+        bool "Enable support for EP80219"
+        select ARCH_IOP321
+        select ARCH_IQ31244
+        help
+          Say Y here if you want to run your kernel on the Intel EP80219
+          evaluation kit for the Intel 80219 chipset (a IOP321 variant).
 
 # Which IOP variant are we running?
 config ARCH_IOP321
@@ -56,8 +59,8 @@ config IOP331_STEPD
         bool "Chip stepping D of the IOP80331 processor or IOP80333"
         depends on (ARCH_IOP331)
         help
-                  Say Y here if you have StepD of the IOP80331 or IOP8033
-                  based platforms.
+          Say Y here if you have StepD of the IOP80331 or IOP8033
+          based platforms.
 
 endmenu
 endif
diff --git a/arch/arm/mach-omap1/Kconfig b/arch/arm/mach-omap1/Kconfig
index f8d716ccc1df..d135568dc9e7 100644
--- a/arch/arm/mach-omap1/Kconfig
+++ b/arch/arm/mach-omap1/Kconfig
@@ -62,6 +62,13 @@ config MACH_OMAP_PERSEUS2
           Support for TI OMAP 730 Perseus2 board. Say Y here if you have such
           a board.
 
+config MACH_OMAP_FSAMPLE
+        bool "TI F-Sample"
+        depends on ARCH_OMAP1 && ARCH_OMAP730
+        help
+          Support for TI OMAP 850 F-Sample board. Say Y here if you have such
+          a board.
+
 config MACH_VOICEBLUE
         bool "Voiceblue"
         depends on ARCH_OMAP1 && ARCH_OMAP15XX
diff --git a/arch/arm/mach-omap1/Makefile b/arch/arm/mach-omap1/Makefile
index 9ea719550ad3..7165f74f78da 100644
--- a/arch/arm/mach-omap1/Makefile
+++ b/arch/arm/mach-omap1/Makefile
@@ -17,6 +17,7 @@ obj-$(CONFIG_MACH_OMAP_H2)		+= board-h2.o
 obj-$(CONFIG_MACH_OMAP_INNOVATOR)       += board-innovator.o
 obj-$(CONFIG_MACH_OMAP_GENERIC)         += board-generic.o
 obj-$(CONFIG_MACH_OMAP_PERSEUS2)        += board-perseus2.o
+obj-$(CONFIG_MACH_OMAP_FSAMPLE)         += board-fsample.o
 obj-$(CONFIG_MACH_OMAP_OSK)             += board-osk.o
 obj-$(CONFIG_MACH_OMAP_H3)              += board-h3.o
 obj-$(CONFIG_MACH_VOICEBLUE)            += board-voiceblue.o
diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c
index 73df32aac4c4..8437d065ada5 100644
--- a/arch/arm/mach-omap1/board-ams-delta.c
+++ b/arch/arm/mach-omap1/board-ams-delta.c
@@ -80,8 +80,15 @@ static struct omap_uart_config ams_delta_uart_config __initdata = {
         .enabled_uarts = 1,
 };
 
+static struct omap_usb_config ams_delta_usb_config __initdata = {
+        .register_host  = 1,
+        .hmc_mode       = 16,
+        .pins[0]        = 2,
+};
+
 static struct omap_board_config_kernel ams_delta_config[] = {
         { OMAP_TAG_UART,        &ams_delta_uart_config },
+        { OMAP_TAG_USB,         &ams_delta_usb_config },
 };
 
 static struct platform_device ams_delta_led_device = {
diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c
new file mode 100644
index 000000000000..c753a3c5aadd
--- /dev/null
+++ b/arch/arm/mach-omap1/board-fsample.c
@@ -0,0 +1,319 @@
+/*
+ * linux/arch/arm/mach-omap1/board-fsample.c
+ *
+ * Modified from board-perseus2.c
+ *
+ * Original OMAP730 support by Jean Pihet <j-pihet@ti.com>
+ * Updated for 2.6 by Kevin Hilman <kjh@hilman.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+#include <linux/input.h>
+
+#include <asm/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/flash.h>
+#include <asm/mach/map.h>
+
+#include <asm/arch/tc.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/mux.h>
+#include <asm/arch/fpga.h>
+#include <asm/arch/keypad.h>
+#include <asm/arch/common.h>
+#include <asm/arch/board.h>
+#include <asm/arch/board-fsample.h>
+
+static int fsample_keymap[] = {
+        KEY(0,0,KEY_UP),
+        KEY(0,1,KEY_RIGHT),
+        KEY(0,2,KEY_LEFT),
+        KEY(0,3,KEY_DOWN),
+        KEY(0,4,KEY_CENTER),
+        KEY(0,5,KEY_0_5),
+        KEY(1,0,KEY_SOFT2),
+        KEY(1,1,KEY_SEND),
+        KEY(1,2,KEY_END),
+        KEY(1,3,KEY_VOLUMEDOWN),
+        KEY(1,4,KEY_VOLUMEUP),
+        KEY(1,5,KEY_RECORD),
+        KEY(2,0,KEY_SOFT1),
+        KEY(2,1,KEY_3),
+        KEY(2,2,KEY_6),
+        KEY(2,3,KEY_9),
+        KEY(2,4,KEY_SHARP),
+        KEY(2,5,KEY_2_5),
+        KEY(3,0,KEY_BACK),
+        KEY(3,1,KEY_2),
+        KEY(3,2,KEY_5),
+        KEY(3,3,KEY_8),
+        KEY(3,4,KEY_0),
+        KEY(3,5,KEY_HEADSETHOOK),
+        KEY(4,0,KEY_HOME),
+        KEY(4,1,KEY_1),
+        KEY(4,2,KEY_4),
+        KEY(4,3,KEY_7),
+        KEY(4,4,KEY_STAR),
+        KEY(4,5,KEY_POWER),
+        0
+};
+
+static struct resource smc91x_resources[] = {
+        [0] = {
+                .start  = H2P2_DBG_FPGA_ETHR_START,     /* Physical */
+                .end    = H2P2_DBG_FPGA_ETHR_START + 0xf,
+                .flags  = IORESOURCE_MEM,
+        },
+        [1] = {
+                .start  = INT_730_MPU_EXT_NIRQ,
+                .end    = 0,
+                .flags  = IORESOURCE_IRQ,
+        },
+};
+
+static struct mtd_partition nor_partitions[] = {
+        /* bootloader (U-Boot, etc) in first sector */
+        {
+              .name             = "bootloader",
+              .offset           = 0,
+              .size             = SZ_128K,
+              .mask_flags       = MTD_WRITEABLE, /* force read-only */
+        },
+        /* bootloader params in the next sector */
+        {
+              .name             = "params",
+              .offset           = MTDPART_OFS_APPEND,
+              .size             = SZ_128K,
+              .mask_flags       = 0,
+        },
+        /* kernel */
+        {
+              .name             = "kernel",
+              .offset           = MTDPART_OFS_APPEND,
+              .size             = SZ_2M,
+              .mask_flags       = 0
+        },
+        /* rest of flash is a file system */
+        {
+              .name             = "rootfs",
+              .offset           = MTDPART_OFS_APPEND,
+              .size             = MTDPART_SIZ_FULL,
+              .mask_flags       = 0
+        },
+};
+
+static struct flash_platform_data nor_data = {
+        .map_name       = "cfi_probe",
+        .width          = 2,
+        .parts          = nor_partitions,
+        .nr_parts       = ARRAY_SIZE(nor_partitions),
+};
+
+static struct resource nor_resource = {
+        .start          = OMAP_CS0_PHYS,
+        .end            = OMAP_CS0_PHYS + SZ_32M - 1,
+        .flags          = IORESOURCE_MEM,
+};
+
+static struct platform_device nor_device = {
+        .name           = "omapflash",
+        .id             = 0,
+        .dev            = {
+                .platform_data  = &nor_data,
+        },
+        .num_resources  = 1,
+        .resource       = &nor_resource,
+};
+
+static struct nand_platform_data nand_data = {
+        .options        = NAND_SAMSUNG_LP_OPTIONS,
+};
+
+static struct resource nand_resource = {
+        .start          = OMAP_CS3_PHYS,
+        .end            = OMAP_CS3_PHYS + SZ_4K - 1,
+        .flags          = IORESOURCE_MEM,
+};
+
+static struct platform_device nand_device = {
+        .name           = "omapnand",
+        .id             = 0,
+        .dev            = {
+                .platform_data  = &nand_data,
+        },
+        .num_resources  = 1,
+        .resource       = &nand_resource,
+};
+
+static struct platform_device smc91x_device = {
+        .name           = "smc91x",
+        .id             = 0,
+        .num_resources  = ARRAY_SIZE(smc91x_resources),
+        .resource       = smc91x_resources,
+};
+
+static struct resource kp_resources[] = {
+        [0] = {
+                .start  = INT_730_MPUIO_KEYPAD,
+                .end    = INT_730_MPUIO_KEYPAD,
+                .flags  = IORESOURCE_IRQ,
+        },
+};
+
+static struct omap_kp_platform_data kp_data = {
+        .rows   = 8,
+        .cols   = 8,
+        .keymap = fsample_keymap,
+};
+
+static struct platform_device kp_device = {
+        .name           = "omap-keypad",
+        .id             = -1,
+        .dev            = {
+                .platform_data = &kp_data,
+        },
+        .num_resources  = ARRAY_SIZE(kp_resources),
+        .resource       = kp_resources,
+};
+
+static struct platform_device lcd_device = {
+        .name           = "lcd_p2",
+        .id             = -1,
+};
+
+static struct platform_device *devices[] __initdata = {
+        &nor_device,
+        &nand_device,
+        &smc91x_device,
+        &kp_device,
+        &lcd_device,
+};
+
+#define P2_NAND_RB_GPIO_PIN     62
+
+static int nand_dev_ready(struct nand_platform_data *data)
+{
+        return omap_get_gpio_datain(P2_NAND_RB_GPIO_PIN);
+}
+
+static struct omap_uart_config fsample_uart_config __initdata = {
+        .enabled_uarts = ((1 << 0) | (1 << 1)),
+};
+
+static struct omap_lcd_config fsample_lcd_config __initdata = {
+        .ctrl_name      = "internal",
+};
+
+static struct omap_board_config_kernel fsample_config[] = {
+        { OMAP_TAG_UART,        &fsample_uart_config },
+        { OMAP_TAG_LCD,         &fsample_lcd_config },
+};
+
+static void __init omap_fsample_init(void)
+{
+        if (!(omap_request_gpio(P2_NAND_RB_GPIO_PIN)))
+                nand_data.dev_ready = nand_dev_ready;
+
+        omap_cfg_reg(L3_1610_FLASH_CS2B_OE);
+        omap_cfg_reg(M8_1610_FLASH_CS2B_WE);
+
+        platform_add_devices(devices, ARRAY_SIZE(devices));
+
+        omap_board_config = fsample_config;
+        omap_board_config_size = ARRAY_SIZE(fsample_config);
+        omap_serial_init();
+}
+
+static void __init fsample_init_smc91x(void)
+{
+        fpga_write(1, H2P2_DBG_FPGA_LAN_RESET);
+        mdelay(50);
+        fpga_write(fpga_read(H2P2_DBG_FPGA_LAN_RESET) & ~1,
+                   H2P2_DBG_FPGA_LAN_RESET);
+        mdelay(50);
+}
+
+void omap_fsample_init_irq(void)
+{
+        omap1_init_common_hw();
+        omap_init_irq();
+        omap_gpio_init();
+        fsample_init_smc91x();
+}
+
+/* Only FPGA needs to be mapped here. All others are done with ioremap */
+static struct map_desc omap_fsample_io_desc[] __initdata = {
+        {
+                .virtual        = H2P2_DBG_FPGA_BASE,
+                .pfn            = __phys_to_pfn(H2P2_DBG_FPGA_START),
+                .length         = H2P2_DBG_FPGA_SIZE,
+                .type           = MT_DEVICE
+        },
+        {
+                .virtual        = FSAMPLE_CPLD_BASE,
+                .pfn            = __phys_to_pfn(FSAMPLE_CPLD_START),
+                .length         = FSAMPLE_CPLD_SIZE,
+                .type           = MT_DEVICE
+        }
+};
+
+static void __init omap_fsample_map_io(void)
+{
+        omap1_map_common_io();
+        iotable_init(omap_fsample_io_desc,
+                     ARRAY_SIZE(omap_fsample_io_desc));
+
+        /* Early, board-dependent init */
+
+        /*
+         * Hold GSM Reset until needed
+         */
+        omap_writew(omap_readw(OMAP730_DSP_M_CTL) & ~1, OMAP730_DSP_M_CTL);
+
+        /*
+         * UARTs -> done automagically by 8250 driver
+         */
+
+        /*
+         * CSx timings, GPIO Mux ... setup
+         */
+
+        /* Flash: CS0 timings setup */
+        omap_writel(0x0000fff3, OMAP730_FLASH_CFG_0);
+        omap_writel(0x00000088, OMAP730_FLASH_ACFG_0);
+
+        /*
+         * Ethernet support through the debug board
+         * CS1 timings setup
+         */
+        omap_writel(0x0000fff3, OMAP730_FLASH_CFG_1);
+        omap_writel(0x00000000, OMAP730_FLASH_ACFG_1);
+
+        /*
+         * Configure MPU_EXT_NIRQ IO in IO_CONF9 register,
+         * It is used as the Ethernet controller interrupt
+         */
+        omap_writel(omap_readl(OMAP730_IO_CONF_9) & 0x1FFFFFFF, OMAP730_IO_CONF_9);
+}
+
+MACHINE_START(OMAP_FSAMPLE, "OMAP730 F-Sample")
+/* Maintainer: Brian Swetland <swetland@google.com> */
+        .phys_io        = 0xfff00000,
+        .io_pg_offst    = ((0xfef00000) >> 18) & 0xfffc,
+        .boot_params    = 0x10000100,
+        .map_io         = omap_fsample_map_io,
+        .init_irq       = omap_fsample_init_irq,
+        .init_machine   = omap_fsample_init,
+        .timer          = &omap_timer,
+MACHINE_END
diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c
index e90c137a4cf3..4cbc62db5b5d 100644
--- a/arch/arm/mach-omap1/board-innovator.c
+++ b/arch/arm/mach-omap1/board-innovator.c
@@ -37,6 +37,8 @@
 #include <asm/arch/usb.h>
 #include <asm/arch/keypad.h>
 #include <asm/arch/common.h>
+#include <asm/arch/mcbsp.h>
+#include <asm/arch/omap-alsa.h>
 
 static int innovator_keymap[] = {
         KEY(0, 0, KEY_F1),
@@ -112,6 +114,42 @@ static struct platform_device innovator_flash_device = {
         .resource       = &innovator_flash_resource,
 };
 
+#define DEFAULT_BITPERSAMPLE 16
+
+static struct omap_mcbsp_reg_cfg mcbsp_regs = {
+        .spcr2 = FREE | FRST | GRST | XRST | XINTM(3),
+        .spcr1 = RINTM(3) | RRST,
+        .rcr2 = RPHASE | RFRLEN2(OMAP_MCBSP_WORD_8) |
+            RWDLEN2(OMAP_MCBSP_WORD_16) | RDATDLY(0),
+        .rcr1 = RFRLEN1(OMAP_MCBSP_WORD_8) | RWDLEN1(OMAP_MCBSP_WORD_16),
+        .xcr2 = XPHASE | XFRLEN2(OMAP_MCBSP_WORD_8) |
+            XWDLEN2(OMAP_MCBSP_WORD_16) | XDATDLY(0) | XFIG,
+        .xcr1 = XFRLEN1(OMAP_MCBSP_WORD_8) | XWDLEN1(OMAP_MCBSP_WORD_16),
+        .srgr1 = FWID(DEFAULT_BITPERSAMPLE - 1),
+        .srgr2 = GSYNC | CLKSP | FSGM | FPER(DEFAULT_BITPERSAMPLE * 2 - 1),
+        /*.pcr0 = FSXM | FSRM | CLKXM | CLKRM | CLKXP | CLKRP,*/ /* mcbsp: master */
+        .pcr0 = CLKXP | CLKRP,  /* mcbsp: slave */
+};
+
+static struct omap_alsa_codec_config alsa_config = {
+        .name                   = "OMAP Innovator AIC23",
+        .mcbsp_regs_alsa        = &mcbsp_regs,
+        .codec_configure_dev    = NULL, // aic23_configure,
+        .codec_set_samplerate   = NULL, // aic23_set_samplerate,
+        .codec_clock_setup      = NULL, // aic23_clock_setup,
+        .codec_clock_on         = NULL, // aic23_clock_on,
+        .codec_clock_off        = NULL, // aic23_clock_off,
+        .get_default_samplerate = NULL, // aic23_get_default_samplerate,
+};
+
+static struct platform_device innovator_mcbsp1_device = {
+        .name   = "omap_alsa_mcbsp",
+        .id     = 1,
+        .dev = {
+                .platform_data  = &alsa_config,
+        },
+};
+
 static struct resource innovator_kp_resources[] = {
         [0] = {
                 .start  = INT_KEYBOARD,
@@ -139,6 +177,10 @@ static struct platform_device innovator_kp_device = {
 
 #ifdef CONFIG_ARCH_OMAP15XX
 
+#include <linux/spi/spi.h>
+#include <linux/spi/ads7846.h>
+
+
 /* Only FPGA needs to be mapped here. All others are done with ioremap */
 static struct map_desc innovator1510_io_desc[] __initdata = {
         {
@@ -174,13 +216,44 @@ static struct platform_device innovator1510_lcd_device = {
         .id             = -1,
 };
 
+static struct platform_device innovator1510_spi_device = {
+        .name           = "spi_inn1510",
+        .id             = -1,
+};
+
 static struct platform_device *innovator1510_devices[] __initdata = {
         &innovator_flash_device,
         &innovator1510_smc91x_device,
+        &innovator_mcbsp1_device,
         &innovator_kp_device,
         &innovator1510_lcd_device,
+        &innovator1510_spi_device,
 };
 
+static int innovator_get_pendown_state(void)
+{
+        return !(fpga_read(OMAP1510_FPGA_TOUCHSCREEN) & (1 << 5));
+}
+
+static const struct ads7846_platform_data innovator1510_ts_info = {
+        .model                  = 7846,
+        .vref_delay_usecs       = 100,  /* internal, no capacitor */
+        .x_plate_ohms           = 419,
+        .y_plate_ohms           = 486,
+        .get_pendown_state      = innovator_get_pendown_state,
+};
+
+static struct spi_board_info __initdata innovator1510_boardinfo[] = { {
+        /* FPGA (bus "10") CS0 has an ads7846e */
+        .modalias               = "ads7846",
+        .platform_data          = &innovator1510_ts_info,
+        .irq                    = OMAP1510_INT_FPGA_TS,
+        .max_speed_hz           = 120000 /* max sample rate at 3V */
+                                        * 26 /* command + data + overhead */,
+        .bus_num                = 10,
+        .chip_select            = 0,
+} };
+
 #endif /* CONFIG_ARCH_OMAP15XX */
 
 #ifdef CONFIG_ARCH_OMAP16XX
@@ -311,6 +384,8 @@ static void __init innovator_init(void)
 #ifdef CONFIG_ARCH_OMAP15XX
         if (cpu_is_omap1510()) {
                 platform_add_devices(innovator1510_devices, ARRAY_SIZE(innovator1510_devices));
+                spi_register_board_info(innovator1510_boardinfo,
+                                ARRAY_SIZE(innovator1510_boardinfo));
         }
 #endif
 #ifdef CONFIG_ARCH_OMAP16XX
diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
index 1160093e8ef6..e0711d23a6b0 100644
--- a/arch/arm/mach-omap1/board-osk.c
+++ b/arch/arm/mach-omap1/board-osk.c
@@ -33,7 +33,6 @@
 
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
-#include <linux/input.h>
 
 #include <asm/hardware.h>
 #include <asm/mach-types.h>
@@ -45,25 +44,10 @@
 #include <asm/arch/usb.h>
 #include <asm/arch/mux.h>
 #include <asm/arch/tc.h>
-#include <asm/arch/keypad.h>
 #include <asm/arch/common.h>
 #include <asm/arch/mcbsp.h>
 #include <asm/arch/omap-alsa.h>
 
-static int osk_keymap[] = {
-        KEY(0, 0, KEY_F1),
-        KEY(0, 3, KEY_UP),
-        KEY(1, 1, KEY_LEFTCTRL),
-        KEY(1, 2, KEY_LEFT),
-        KEY(2, 0, KEY_SPACE),
-        KEY(2, 1, KEY_ESC),
-        KEY(2, 2, KEY_DOWN),
-        KEY(3, 2, KEY_ENTER),
-        KEY(3, 3, KEY_RIGHT),
-        0
-};
-
-
 static struct mtd_partition osk_partitions[] = {
         /* bootloader (U-Boot, etc) in first sector */
         {
@@ -181,48 +165,17 @@ static struct omap_alsa_codec_config alsa_config = {
 
 static struct platform_device osk5912_mcbsp1_device = {
         .name   = "omap_alsa_mcbsp",
-        .id     = 1,
+        .id     = 1,
         .dev = {
                 .platform_data  = &alsa_config,
         },
 };
 
-static struct resource osk5912_kp_resources[] = {
-        [0] = {
-                .start  = INT_KEYBOARD,
-                .end    = INT_KEYBOARD,
-                .flags  = IORESOURCE_IRQ,
-        },
-};
-
-static struct omap_kp_platform_data osk_kp_data = {
-        .rows   = 8,
-        .cols   = 8,
-        .keymap = osk_keymap,
-};
-
-static struct platform_device osk5912_kp_device = {
-        .name           = "omap-keypad",
-        .id             = -1,
-        .dev            = {
-                .platform_data = &osk_kp_data,
-        },
-        .num_resources  = ARRAY_SIZE(osk5912_kp_resources),
-        .resource       = osk5912_kp_resources,
-};
-
-static struct platform_device osk5912_lcd_device = {
-        .name           = "lcd_osk",
-        .id             = -1,
-};
-
 static struct platform_device *osk5912_devices[] __initdata = {
         &osk5912_flash_device,
         &osk5912_smc91x_device,
         &osk5912_cf_device,
         &osk5912_mcbsp1_device,
-        &osk5912_kp_device,
-        &osk5912_lcd_device,
 };
 
 static void __init osk_init_smc91x(void)
@@ -276,18 +229,100 @@ static struct omap_uart_config osk_uart_config __initdata = {
         .enabled_uarts = (1 << 0),
 };
 
+#ifdef  CONFIG_OMAP_OSK_MISTRAL
 static struct omap_lcd_config osk_lcd_config __initdata = {
         .ctrl_name      = "internal",
 };
+#endif
 
 static struct omap_board_config_kernel osk_config[] = {
         { OMAP_TAG_USB,           &osk_usb_config },
         { OMAP_TAG_UART,                &osk_uart_config },
+#ifdef  CONFIG_OMAP_OSK_MISTRAL
         { OMAP_TAG_LCD,                 &osk_lcd_config },
+#endif
 };
 
 #ifdef  CONFIG_OMAP_OSK_MISTRAL
 
+#include <linux/input.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/ads7846.h>
+
+#include <asm/arch/keypad.h>
+
+static const int osk_keymap[] = {
+        /* KEY(col, row, code) */
+        KEY(0, 0, KEY_F1),              /* SW4 */
+        KEY(0, 3, KEY_UP),              /* (sw2/up) */
+        KEY(1, 1, KEY_LEFTCTRL),        /* SW5 */
+        KEY(1, 2, KEY_LEFT),            /* (sw2/left) */
+        KEY(2, 0, KEY_SPACE),           /* SW3 */
+        KEY(2, 1, KEY_ESC),             /* SW6 */
+        KEY(2, 2, KEY_DOWN),            /* (sw2/down) */
+        KEY(3, 2, KEY_ENTER),           /* (sw2/select) */
+        KEY(3, 3, KEY_RIGHT),           /* (sw2/right) */
+        0
+};
+
+static struct omap_kp_platform_data osk_kp_data = {
+        .rows   = 8,
+        .cols   = 8,
+        .keymap = (int *) osk_keymap,
+};
+
+static struct resource osk5912_kp_resources[] = {
+        [0] = {
+                .start  = INT_KEYBOARD,
+                .end    = INT_KEYBOARD,
+                .flags  = IORESOURCE_IRQ,
+        },
+};
+
+static struct platform_device osk5912_kp_device = {
+        .name           = "omap-keypad",
+        .id             = -1,
+        .dev            = {
+                .platform_data = &osk_kp_data,
+        },
+        .num_resources  = ARRAY_SIZE(osk5912_kp_resources),
+        .resource       = osk5912_kp_resources,
+};
+
+static struct platform_device osk5912_lcd_device = {
+        .name           = "lcd_osk",
+        .id             = -1,
+};
+
+static struct platform_device *mistral_devices[] __initdata = {
+        &osk5912_kp_device,
+        &osk5912_lcd_device,
+};
+
+static int mistral_get_pendown_state(void)
+{
+        return !omap_get_gpio_datain(4);
+}
+
+static const struct ads7846_platform_data mistral_ts_info = {
+        .model                  = 7846,
+        .vref_delay_usecs       = 100,  /* internal, no capacitor */
+        .x_plate_ohms           = 419,
+        .y_plate_ohms           = 486,
+        .get_pendown_state      = mistral_get_pendown_state,
+};
+
+static struct spi_board_info __initdata mistral_boardinfo[] = { {
+        /* MicroWire (bus 2) CS0 has an ads7846e */
+        .modalias               = "ads7846",
+        .platform_data          = &mistral_ts_info,
+        .irq                    = OMAP_GPIO_IRQ(4),
+        .max_speed_hz           = 120000 /* max sample rate at 3V */
+                                        * 26 /* command + data + overhead */,
+        .bus_num                = 2,
+        .chip_select            = 0,
+} };
+
 #ifdef  CONFIG_PM
 static irqreturn_t
 osk_mistral_wake_interrupt(int irq, void *ignored, struct pt_regs *regs)
@@ -298,14 +333,18 @@ osk_mistral_wake_interrupt(int irq, void *ignored, struct pt_regs *regs)
 
 static void __init osk_mistral_init(void)
 {
-        /* FIXME here's where to feed in framebuffer, touchpad, and
-         * keyboard setup ...  not in the drivers for those devices!
-         *
-         * NOTE:  we could actually tell if there's a Mistral board
+        /* NOTE:  we could actually tell if there's a Mistral board
          * attached, e.g. by trying to read something from the ads7846.
-         * But this is too early for that...
+         * But this arch_init() code is too early for that, since we
+         * can't talk to the ads or even the i2c eeprom.
          */
 
+        // omap_cfg_reg(P19_1610_GPIO6);        // BUSY
+        omap_cfg_reg(P20_1610_GPIO4);   // PENIRQ
+        set_irq_type(OMAP_GPIO_IRQ(4), IRQT_FALLING);
+        spi_register_board_info(mistral_boardinfo,
+                        ARRAY_SIZE(mistral_boardinfo));
+
         /* the sideways button (SW1) is for use as a "wakeup" button */
         omap_cfg_reg(N15_1610_MPUIO2);
         if (omap_request_gpio(OMAP_MPUIO(2)) == 0) {
@@ -329,6 +368,8 @@ static void __init osk_mistral_init(void)
 #endif
         } else
                 printk(KERN_ERR "OSK+Mistral: wakeup button is awol\n");
+
+        platform_add_devices(mistral_devices, ARRAY_SIZE(mistral_devices));
 }
 #else
 static void __init osk_mistral_init(void) { }
diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c
index 619db18144ea..f1958e882e86 100644
--- a/arch/arm/mach-omap1/clock.c
+++ b/arch/arm/mach-omap1/clock.c
@@ -1,3 +1,4 @@
+//kernel/linux-omap-fsample/arch/arm/mach-omap1/clock.c#2 - edit change 3808 (text)
 /*
  *  linux/arch/arm/mach-omap1/clock.c
  *
@@ -20,6 +21,7 @@
 
 #include <asm/io.h>
 
+#include <asm/arch/cpu.h>
 #include <asm/arch/usb.h>
 #include <asm/arch/clock.h>
 #include <asm/arch/sram.h>
@@ -270,8 +272,12 @@ static int omap1_select_table_rate(struct clk * clk, unsigned long rate)
         /*
          * In most cases we should not need to reprogram DPLL.
          * Reprogramming the DPLL is tricky, it must be done from SRAM.
+         * (on 730, bit 13 must always be 1)
          */
-        omap_sram_reprogram_clock(ptr->dpllctl_val, ptr->ckctl_val);
+        if (cpu_is_omap730())
+                omap_sram_reprogram_clock(ptr->dpllctl_val, ptr->ckctl_val | 0x2000);
+        else
+                omap_sram_reprogram_clock(ptr->dpllctl_val, ptr->ckctl_val);
 
         ck_dpll1.rate = ptr->pll_rate;
         propagate_rate(&ck_dpll1);
@@ -748,7 +754,7 @@ int __init omap1_clk_init(void)
                 printk(KERN_ERR "System frequencies not set. Check your config.\n");
                 /* Guess sane values (60MHz) */
                 omap_writew(0x2290, DPLL_CTL);
-                omap_writew(0x1005, ARM_CKCTL);
+                omap_writew(cpu_is_omap730() ? 0x3005 : 0x1005, ARM_CKCTL);
                 ck_dpll1.rate = 60000000;
                 propagate_rate(&ck_dpll1);
         }
@@ -761,13 +767,17 @@ int __init omap1_clk_init(void)
                ck_dpll1.rate / 1000000, (ck_dpll1.rate / 100000) % 10,
                arm_ck.rate / 1000000, (arm_ck.rate / 100000) % 10);
 
-#ifdef CONFIG_MACH_OMAP_PERSEUS2
+#if defined(CONFIG_MACH_OMAP_PERSEUS2) || defined(CONFIG_MACH_OMAP_FSAMPLE)
         /* Select slicer output as OMAP input clock */
         omap_writew(omap_readw(OMAP730_PCC_UPLD_CTRL) & ~0x1, OMAP730_PCC_UPLD_CTRL);
 #endif
 
         /* Turn off DSP and ARM_TIMXO. Make sure ARM_INTHCK is not divided */
-        omap_writew(omap_readw(ARM_CKCTL) & 0x0fff, ARM_CKCTL);
+        /* (on 730, bit 13 must not be cleared) */
+        if (cpu_is_omap730())
+                omap_writew(omap_readw(ARM_CKCTL) & 0x2fff, ARM_CKCTL);
+        else
+                omap_writew(omap_readw(ARM_CKCTL) & 0x0fff, ARM_CKCTL);
 
         /* Put DSP/MPUI into reset until needed */
         omap_writew(0, ARM_RSTCT1);
diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c
index ddf6b07dc9c7..1b4e1d57afb1 100644
--- a/arch/arm/mach-omap1/pm.c
+++ b/arch/arm/mach-omap1/pm.c
@@ -1,3 +1,4 @@
+//kernel/linux-omap-fsample/arch/arm/mach-omap1/pm.c#3 - integrate change 4545 (text)
 /*
  * linux/arch/arm/mach-omap1/pm.c
  *
@@ -50,6 +51,7 @@
 #include <asm/mach/irq.h>
 #include <asm/mach-types.h>
 
+#include <asm/arch/cpu.h>
 #include <asm/arch/irqs.h>
 #include <asm/arch/clock.h>
 #include <asm/arch/sram.h>
@@ -326,8 +328,9 @@ void omap_pm_suspend(void)
         /* stop DSP */
         omap_writew(omap_readw(ARM_RSTCT1) & ~(1 << DSP_EN), ARM_RSTCT1);
 
-        /* shut down dsp_ck */
-        omap_writew(omap_readw(ARM_CKCTL) & ~(1 << EN_DSPCK), ARM_CKCTL);
+                /* shut down dsp_ck */
+        if (!cpu_is_omap730())
+                omap_writew(omap_readw(ARM_CKCTL) & ~(1 << EN_DSPCK), ARM_CKCTL);
 
         /* temporarily enabling api_ck to access DSP registers */
         omap_writew(omap_readw(ARM_IDLECT2) | 1 << EN_APICK, ARM_IDLECT2);
diff --git a/arch/arm/mach-omap1/time.c b/arch/arm/mach-omap1/time.c
index a85fe6066bc4..64c2d69c615c 100644
--- a/arch/arm/mach-omap1/time.c
+++ b/arch/arm/mach-omap1/time.c
@@ -94,7 +94,7 @@ static inline unsigned long long cycles_2_ns(unsigned long long cyc)
  * will break. On P2, the timer count rate is 6.5 MHz after programming PTV
  * with 0. This divides the 13MHz input by 2, and is undocumented.
  */
-#ifdef CONFIG_MACH_OMAP_PERSEUS2
+#if defined(CONFIG_MACH_OMAP_PERSEUS2) || defined(CONFIG_MACH_OMAP_FSAMPLE)
 /* REVISIT: This ifdef construct should be replaced by a query to clock
  * framework to see if timer base frequency is 12.0, 13.0 or 19.2 MHz.
  */
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 537dd2e6d380..aab97ccf1e63 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -8,6 +8,7 @@ config ARCH_OMAP24XX
 config ARCH_OMAP2420
         bool "OMAP2420 support"
         depends on ARCH_OMAP24XX
+        select OMAP_DM_TIMER
 
 comment "OMAP Board Type"
         depends on ARCH_OMAP2
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 111eaa64258f..266d88e77bdc 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -3,12 +3,13 @@
 #
 
 # Common support
-obj-y := irq.o id.o io.o sram-fn.o memory.o prcm.o clock.o mux.o devices.o serial.o
+obj-y := irq.o id.o io.o sram-fn.o memory.o prcm.o clock.o mux.o devices.o \
+         serial.o gpmc.o
 
 obj-$(CONFIG_OMAP_MPU_TIMER)            += timer-gp.o
 
 # Power Management
-obj-$(CONFIG_PM) += pm.o sleep.o
+obj-$(CONFIG_PM) += pm.o pm-domain.o sleep.o
 
 # Specific board support
 obj-$(CONFIG_MACH_OMAP_GENERIC)         += board-generic.o
diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index 72eb4bf571ac..6789dd4029a1 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -660,26 +660,35 @@ static int omap2_clk_set_rate(struct clk *clk, unsigned long rate)
 
                 /* Isolate control register */
                 div_sel = (SRC_RATE_SEL_MASK & clk->flags);
-                div_off = clk->src_offset;
+                div_off = clk->rate_offset;
 
                 validrate = omap2_clksel_round_rate(clk, rate, &new_div);
-                if(validrate != rate)
+                if (validrate != rate)
                         return(ret);
 
                 field_val = omap2_get_clksel(&div_sel, &field_mask, clk);
                 if (div_sel == 0)
                         return ret;
 
-                if(clk->flags & CM_SYSCLKOUT_SEL1){
-                        switch(new_div){
-                        case 16: field_val = 4; break;
-                        case 8:  field_val = 3; break;
-                        case 4:  field_val = 2; break;
-                        case 2:  field_val = 1; break;
-                        case 1:  field_val = 0; break;
+                if (clk->flags & CM_SYSCLKOUT_SEL1) {
+                        switch (new_div) {
+                        case 16:
+                                field_val = 4;
+                                break;
+                        case 8:
+                                field_val = 3;
+                                break;
+                        case 4:
+                                field_val = 2;
+                                break;
+                        case 2:
+                                field_val = 1;
+                                break;
+                        case 1:
+                                field_val = 0;
+                                break;
                         }
-                }
-                else
+                } else
                         field_val = new_div;
 
                 reg = (void __iomem *)div_sel;
@@ -744,7 +753,7 @@ static u32 omap2_get_src_field(u32 *type_to_addr, u32 reg_offset,
                         val = 0x2;
                 break;
         case CM_WKUP_SEL1:
-                src_reg_addr = (u32)&CM_CLKSEL2_CORE;
+                src_reg_addr = (u32)&CM_CLKSEL_WKUP;
                 mask = 0x3;
                 if (src_clk == &func_32k_ck)
                         val = 0x0;
@@ -784,9 +793,9 @@ static u32 omap2_get_src_field(u32 *type_to_addr, u32 reg_offset,
                         val = 0;
                 if (src_clk == &sys_ck)
                         val = 1;
-                if (src_clk == &func_54m_ck)
-                        val = 2;
                 if (src_clk == &func_96m_ck)
+                        val = 2;
+                if (src_clk == &func_54m_ck)
                         val = 3;
                 break;
         }
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index 6c78d471fab7..2781dfbc5164 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -1062,7 +1062,7 @@ static struct clk gpt2_ick = {
         .parent         = &l4_ck,
         .flags          = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
         .enable_reg     = (void __iomem *)&CM_ICLKEN1_CORE,     /* Bit4 */
-        .enable_bit     = 0,
+        .enable_bit     = 4,
         .recalc         = &omap2_followparent_recalc,
 };
 
diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
index fb7f91da1aad..5139677e4266 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -105,6 +105,51 @@ static inline void omap_init_sti(void)
 static inline void omap_init_sti(void) {}
 #endif
 
+#if defined(CONFIG_SPI_OMAP24XX)
+
+#include <asm/arch/mcspi.h>
+
+#define OMAP2_MCSPI1_BASE               0x48098000
+#define OMAP2_MCSPI2_BASE               0x4809a000
+
+/* FIXME: use resources instead */
+
+static struct omap2_mcspi_platform_config omap2_mcspi1_config = {
+        .base           = io_p2v(OMAP2_MCSPI1_BASE),
+        .num_cs         = 4,
+};
+
+struct platform_device omap2_mcspi1 = {
+        .name           = "omap2_mcspi",
+        .id             = 1,
+        .dev            = {
+                .platform_data = &omap2_mcspi1_config,
+        },
+};
+
+static struct omap2_mcspi_platform_config omap2_mcspi2_config = {
+        .base           = io_p2v(OMAP2_MCSPI2_BASE),
+        .num_cs         = 2,
+};
+
+struct platform_device omap2_mcspi2 = {
+        .name           = "omap2_mcspi",
+        .id             = 2,
+        .dev            = {
+                .platform_data = &omap2_mcspi2_config,
+        },
+};
+
+static void omap_init_mcspi(void)
+{
+        platform_device_register(&omap2_mcspi1);
+        platform_device_register(&omap2_mcspi2);
+}
+
+#else
+static inline void omap_init_mcspi(void) {}
+#endif
+
 /*-------------------------------------------------------------------------*/
 
 static int __init omap2_init_devices(void)
@@ -113,6 +158,7 @@ static int __init omap2_init_devices(void)
          * in alphabetical order so they're easier to sort through.
          */
         omap_init_i2c();
+        omap_init_mcspi();
         omap_init_sti();
 
         return 0;
diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c
new file mode 100644
index 000000000000..c7a48f921fef
--- /dev/null
+++ b/arch/arm/mach-omap2/gpmc.c
@@ -0,0 +1,209 @@
+/*
+ * GPMC support functions
+ *
+ * Copyright (C) 2005-2006 Nokia Corporation
+ *
+ * Author: Juha Yrjola
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+
+#include <asm/io.h>
+#include <asm/arch/gpmc.h>
+
+#undef DEBUG
+
+#define GPMC_BASE               0x6800a000
+#define GPMC_REVISION           0x00
+#define GPMC_SYSCONFIG          0x10
+#define GPMC_SYSSTATUS          0x14
+#define GPMC_IRQSTATUS          0x18
+#define GPMC_IRQENABLE          0x1c
+#define GPMC_TIMEOUT_CONTROL    0x40
+#define GPMC_ERR_ADDRESS        0x44
+#define GPMC_ERR_TYPE           0x48
+#define GPMC_CONFIG             0x50
+#define GPMC_STATUS             0x54
+#define GPMC_PREFETCH_CONFIG1   0x1e0
+#define GPMC_PREFETCH_CONFIG2   0x1e4
+#define GPMC_PREFETCH_CONTROL   0x1e8
+#define GPMC_PREFETCH_STATUS    0x1f0
+#define GPMC_ECC_CONFIG         0x1f4
+#define GPMC_ECC_CONTROL        0x1f8
+#define GPMC_ECC_SIZE_CONFIG    0x1fc
+
+#define GPMC_CS0                0x60
+#define GPMC_CS_SIZE            0x30
+
+static void __iomem *gpmc_base =
+        (void __iomem *) IO_ADDRESS(GPMC_BASE);
+static void __iomem *gpmc_cs_base =
+        (void __iomem *) IO_ADDRESS(GPMC_BASE) + GPMC_CS0;
+
+static struct clk *gpmc_l3_clk;
+
+static void gpmc_write_reg(int idx, u32 val)
+{
+        __raw_writel(val, gpmc_base + idx);
+}
+
+static u32 gpmc_read_reg(int idx)
+{
+        return __raw_readl(gpmc_base + idx);
+}
+
+void gpmc_cs_write_reg(int cs, int idx, u32 val)
+{
+        void __iomem *reg_addr;
+
+        reg_addr = gpmc_cs_base + (cs * GPMC_CS_SIZE) + idx;
+        __raw_writel(val, reg_addr);
+}
+
+u32 gpmc_cs_read_reg(int cs, int idx)
+{
+        return __raw_readl(gpmc_cs_base + (cs * GPMC_CS_SIZE) + idx);
+}
+
+/* TODO: Add support for gpmc_fck to clock framework and use it */
+static unsigned long gpmc_get_fclk_period(void)
+{
+        /* In picoseconds */
+        return 1000000000 / ((clk_get_rate(gpmc_l3_clk)) / 1000);
+}
+
+unsigned int gpmc_ns_to_ticks(unsigned int time_ns)
+{
+        unsigned long tick_ps;
+
+        /* Calculate in picosecs to yield more exact results */
+        tick_ps = gpmc_get_fclk_period();
+
+        return (time_ns * 1000 + tick_ps - 1) / tick_ps;
+}
+
+#ifdef DEBUG
+static int set_gpmc_timing_reg(int cs, int reg, int st_bit, int end_bit,
+                               int time, const char *name)
+#else
+static int set_gpmc_timing_reg(int cs, int reg, int st_bit, int end_bit,
+                               int time)
+#endif
+{
+        u32 l;
+        int ticks, mask, nr_bits;
+
+        if (time == 0)
+                ticks = 0;
+        else
+                ticks = gpmc_ns_to_ticks(time);
+        nr_bits = end_bit - st_bit + 1;
+        if (ticks >= 1 << nr_bits)
+                return -1;
+
+        mask = (1 << nr_bits) - 1;
+        l = gpmc_cs_read_reg(cs, reg);
+#ifdef DEBUG
+        printk(KERN_INFO "GPMC CS%d: %-10s: %d ticks, %3lu ns (was %i ticks)\n",
+               cs, name, ticks, gpmc_get_fclk_period() * ticks / 1000,
+               (l >> st_bit) & mask);
+#endif
+        l &= ~(mask << st_bit);
+        l |= ticks << st_bit;
+        gpmc_cs_write_reg(cs, reg, l);
+
+        return 0;
+}
+
+#ifdef DEBUG
+#define GPMC_SET_ONE(reg, st, end, field) \
+        if (set_gpmc_timing_reg(cs, (reg), (st), (end),         \
+                        t->field, #field) < 0)                  \
+                return -1
+#else
+#define GPMC_SET_ONE(reg, st, end, field) \
+        if (set_gpmc_timing_reg(cs, (reg), (st), (end), t->field) < 0) \
+                return -1
+#endif
+
+int gpmc_cs_calc_divider(int cs, unsigned int sync_clk)
+{
+        int div;
+        u32 l;
+
+        l = sync_clk * 1000 + (gpmc_get_fclk_period() - 1);
+        div = l / gpmc_get_fclk_period();
+        if (div > 4)
+                return -1;
+        if (div < 0)
+                div = 1;
+
+        return div;
+}
+
+int gpmc_cs_set_timings(int cs, const struct gpmc_timings *t)
+{
+        int div;
+        u32 l;
+
+        div = gpmc_cs_calc_divider(cs, t->sync_clk);
+        if (div < 0)
+                return -1;
+
+        GPMC_SET_ONE(GPMC_CS_CONFIG2,  0,  3, cs_on);
+        GPMC_SET_ONE(GPMC_CS_CONFIG2,  8, 12, cs_rd_off);
+        GPMC_SET_ONE(GPMC_CS_CONFIG2, 16, 20, cs_wr_off);
+
+        GPMC_SET_ONE(GPMC_CS_CONFIG3,  0,  3, adv_on);
+        GPMC_SET_ONE(GPMC_CS_CONFIG3,  8, 12, adv_rd_off);
+        GPMC_SET_ONE(GPMC_CS_CONFIG3, 16, 20, adv_wr_off);
+
+        GPMC_SET_ONE(GPMC_CS_CONFIG4,  0,  3, oe_on);
+        GPMC_SET_ONE(GPMC_CS_CONFIG4,  8, 12, oe_off);
+        GPMC_SET_ONE(GPMC_CS_CONFIG4, 16, 19, we_on);
+        GPMC_SET_ONE(GPMC_CS_CONFIG4, 24, 28, we_off);
+
+        GPMC_SET_ONE(GPMC_CS_CONFIG5,  0,  4, rd_cycle);
+        GPMC_SET_ONE(GPMC_CS_CONFIG5,  8, 12, wr_cycle);
+        GPMC_SET_ONE(GPMC_CS_CONFIG5, 16, 20, access);
+
+        GPMC_SET_ONE(GPMC_CS_CONFIG5, 24, 27, page_burst_access);
+
+#ifdef DEBUG
+        printk(KERN_INFO "GPMC CS%d CLK period is %lu (div %d)\n",
+               cs, gpmc_get_fclk_period(), div);
+#endif
+
+        l = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1);
+        l &= ~0x03;
+        l |= (div - 1);
+
+        return 0;
+}
+
+unsigned long gpmc_cs_get_base_addr(int cs)
+{
+        return (gpmc_cs_read_reg(cs, GPMC_CS_CONFIG7) & 0x1f) << 24;
+}
+
+void __init gpmc_init(void)
+{
+        u32 l;
+
+        gpmc_l3_clk = clk_get(NULL, "core_l3_ck");
+        BUG_ON(IS_ERR(gpmc_l3_clk));
+
+        l = gpmc_read_reg(GPMC_REVISION);
+        printk(KERN_INFO "GPMC revision %d.%d\n", (l >> 4) & 0x0f, l & 0x0f);
+        /* Set smart idle mode and automatic L3 clock gating */
+        l = gpmc_read_reg(GPMC_SYSCONFIG);
+        l &= 0x03 << 3;
+        l |= (0x02 << 3) | (1 << 0);
+        gpmc_write_reg(GPMC_SYSCONFIG, l);
+}
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 7d5711611f2f..68456b79a0a8 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -27,6 +27,7 @@
 extern void omap_sram_init(void);
 extern int omap2_clk_init(void);
 extern void omap2_check_revision(void);
+extern void gpmc_init(void);
 
 /*
  * The machine specific code may provide the extra mapping besides the
@@ -67,4 +68,5 @@ void __init omap2_init_common_hw(void)
 {
         omap2_mux_init();
         omap2_clk_init();
+        gpmc_init();
 }
diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c
index 1197dc38c20a..c2c482cd1cb7 100644
--- a/arch/arm/mach-omap2/mux.c
+++ b/arch/arm/mach-omap2/mux.c
@@ -53,6 +53,12 @@ MUX_CFG_24XX("W19_24XX_SYS_NIRQ",	0x12c,	0,	1,	1,	1)
 /* 24xx clocks */
 MUX_CFG_24XX("W14_24XX_SYS_CLKOUT",     0x137,  0,      1,      1,      1)
 
+/* 24xx GPMC wait pin monitoring */
+MUX_CFG_24XX("L3_GPMC_WAIT0",           0x09a,  0,      1,      1,      1)
+MUX_CFG_24XX("N7_GPMC_WAIT1",           0x09b,  0,      1,      1,      1)
+MUX_CFG_24XX("M1_GPMC_WAIT2",           0x09c,  0,      1,      1,      1)
+MUX_CFG_24XX("P1_GPMC_WAIT3",           0x09d,  0,      1,      1,      1)
+
 /* 24xx McBSP */
 MUX_CFG_24XX("Y15_24XX_MCBSP2_CLKX",    0x124,  1,      1,      0,      1)
 MUX_CFG_24XX("R14_24XX_MCBSP2_FSX",     0x125,  1,      1,      0,      1)
@@ -60,18 +66,38 @@ MUX_CFG_24XX("W15_24XX_MCBSP2_DR",	0x126,	1,	1,	0,	1)
 MUX_CFG_24XX("V15_24XX_MCBSP2_DX",      0x127,  1,      1,      0,      1)
 
 /* 24xx GPIO */
-MUX_CFG_24XX("M21_242X_GPIO11",  0x0c9,  3,      1,      1,      1)
+MUX_CFG_24XX("M21_242X_GPIO11",         0x0c9,  3,      1,      1,      1)
 MUX_CFG_24XX("AA10_242X_GPIO13",        0x0e5,  3,      0,      0,      1)
-MUX_CFG_24XX("AA6_242X_GPIO14",  0x0e6,  3,      0,      0,      1)
-MUX_CFG_24XX("AA4_242X_GPIO15",  0x0e7,  3,      0,      0,      1)
-MUX_CFG_24XX("Y11_242X_GPIO16",  0x0e8,  3,      0,      0,      1)
+MUX_CFG_24XX("AA6_242X_GPIO14",         0x0e6,  3,      0,      0,      1)
+MUX_CFG_24XX("AA4_242X_GPIO15",         0x0e7,  3,      0,      0,      1)
+MUX_CFG_24XX("Y11_242X_GPIO16",         0x0e8,  3,      0,      0,      1)
 MUX_CFG_24XX("AA12_242X_GPIO17",        0x0e9,  3,      0,      0,      1)
-MUX_CFG_24XX("AA8_242X_GPIO58",  0x0ea,  3,      0,      0,      1)
+MUX_CFG_24XX("AA8_242X_GPIO58",         0x0ea,  3,      0,      0,      1)
 MUX_CFG_24XX("Y20_24XX_GPIO60",         0x12c,  3,      0,      0,      1)
-MUX_CFG_24XX("W4__24XX_GPIO74",  0x0f2,  3,      0,      0,      1)
+MUX_CFG_24XX("W4__24XX_GPIO74",         0x0f2,  3,      0,      0,      1)
 MUX_CFG_24XX("M15_24XX_GPIO92",         0x10a,  3,      0,      0,      1)
 MUX_CFG_24XX("V14_24XX_GPIO117",        0x128,  3,      1,      0,      1)
 
+/* 242x DBG GPIO */
+MUX_CFG_24XX("V4_242X_GPIO49",          0xd3,   3,      0,      0,      1)
+MUX_CFG_24XX("W2_242X_GPIO50",          0xd4,   3,      0,      0,      1)
+MUX_CFG_24XX("U4_242X_GPIO51",          0xd5,   3,      0,      0,      1)
+MUX_CFG_24XX("V3_242X_GPIO52",          0xd6,   3,      0,      0,      1)
+MUX_CFG_24XX("V2_242X_GPIO53",          0xd7,   3,      0,      0,      1)
+MUX_CFG_24XX("V6_242X_GPIO53",          0xcf,   3,      0,      0,      1)
+MUX_CFG_24XX("T4_242X_GPIO54",          0xd8,   3,      0,      0,      1)
+MUX_CFG_24XX("Y4_242X_GPIO54",          0xd0,   3,      0,      0,      1)
+MUX_CFG_24XX("T3_242X_GPIO55",          0xd9,   3,      0,      0,      1)
+MUX_CFG_24XX("U2_242X_GPIO56",          0xda,   3,      0,      0,      1)
+
+/* 24xx external DMA requests */
+MUX_CFG_24XX("AA10_242X_DMAREQ0",       0x0e5,  2,      0,      0,      1)
+MUX_CFG_24XX("AA6_242X_DMAREQ1",        0x0e6,  2,      0,      0,      1)
+MUX_CFG_24XX("E4_242X_DMAREQ2",         0x074,  2,      0,      0,      1)
+MUX_CFG_24XX("G4_242X_DMAREQ3",         0x073,  2,      0,      0,      1)
+MUX_CFG_24XX("D3_242X_DMAREQ4",         0x072,  2,      0,      0,      1)
+MUX_CFG_24XX("E3_242X_DMAREQ5",         0x071,  2,      0,      0,      1)
+
 /* TSC IRQ */
 MUX_CFG_24XX("P20_24XX_TSC_IRQ",        0x108,  0,      0,      0,      1)
 
diff --git a/arch/arm/mach-omap2/pm-domain.c b/arch/arm/mach-omap2/pm-domain.c
new file mode 100644
index 000000000000..5e20e740cde5
--- /dev/null
+++ b/arch/arm/mach-omap2/pm-domain.c
@@ -0,0 +1,300 @@
+/*
+ * linux/arch/arm/mach-omap2/pm-domain.c
+ *
+ * Power domain functions for OMAP2
+ *
+ * Copyright (C) 2006 Nokia Corporation
+ * Tony Lindgren <tony@atomide.com>
+ *
+ * Some code based on earlier OMAP2 sample PM code
+ * Copyright (C) 2005 Texas Instruments, Inc.
+ * Richard Woodruff <r-woodruff2@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+
+#include <asm/io.h>
+
+#include "prcm-regs.h"
+
+/* Power domain offsets */
+#define PM_MPU_OFFSET                   0x100
+#define PM_CORE_OFFSET                  0x200
+#define PM_GFX_OFFSET                   0x300
+#define PM_WKUP_OFFSET                  0x400           /* Autoidle only */
+#define PM_PLL_OFFSET                   0x500           /* Autoidle only */
+#define PM_DSP_OFFSET                   0x800
+#define PM_MDM_OFFSET                   0xc00
+
+/* Power domain wake-up dependency control register */
+#define PM_WKDEP_OFFSET                 0xc8
+#define         EN_MDM                  (1 << 5)
+#define         EN_WKUP                 (1 << 4)
+#define         EN_GFX                  (1 << 3)
+#define         EN_DSP                  (1 << 2)
+#define         EN_MPU                  (1 << 1)
+#define         EN_CORE                 (1 << 0)
+
+/* Core power domain state transition control register */
+#define PM_PWSTCTRL_OFFSET              0xe0
+#define         FORCESTATE              (1 << 18)       /* Only for DSP & GFX */
+#define         MEM4RETSTATE            (1 << 6)
+#define         MEM3RETSTATE            (1 << 5)
+#define         MEM2RETSTATE            (1 << 4)
+#define         MEM1RETSTATE            (1 << 3)
+#define         LOGICRETSTATE           (1 << 2)        /* Logic is retained */
+#define         POWERSTATE_OFF          0x3
+#define         POWERSTATE_RETENTION    0x1
+#define         POWERSTATE_ON           0x0
+
+/* Power domain state register */
+#define PM_PWSTST_OFFSET                0xe4
+
+/* Hardware supervised state transition control register */
+#define CM_CLKSTCTRL_OFFSET             0x48
+#define         AUTOSTAT_MPU            (1 << 0)        /* MPU */
+#define         AUTOSTAT_DSS            (1 << 2)        /* Core */
+#define         AUTOSTAT_L4             (1 << 1)        /* Core */
+#define         AUTOSTAT_L3             (1 << 0)        /* Core */
+#define         AUTOSTAT_GFX            (1 << 0)        /* GFX */
+#define         AUTOSTAT_IVA            (1 << 8)        /* 2420 IVA in DSP domain */
+#define         AUTOSTAT_DSP            (1 << 0)        /* DSP */
+#define         AUTOSTAT_MDM            (1 << 0)        /* MDM */
+
+/* Automatic control of interface clock idling */
+#define CM_AUTOIDLE1_OFFSET             0x30
+#define CM_AUTOIDLE2_OFFSET             0x34            /* Core only */
+#define CM_AUTOIDLE3_OFFSET             0x38            /* Core only */
+#define CM_AUTOIDLE4_OFFSET             0x3c            /* Core only */
+#define         AUTO_54M(x)             (((x) & 0x3) << 6)
+#define         AUTO_96M(x)             (((x) & 0x3) << 2)
+#define         AUTO_DPLL(x)            (((x) & 0x3) << 0)
+#define         AUTO_STOPPED            0x3
+#define         AUTO_BYPASS_FAST        0x2             /* DPLL only */
+#define         AUTO_BYPASS_LOW_POWER   0x1             /* DPLL only */
+#define         AUTO_DISABLED           0x0
+
+/* Voltage control PRCM_VOLTCTRL bits */
+#define         AUTO_EXTVOLT            (1 << 15)
+#define         FORCE_EXTVOLT           (1 << 14)
+#define         SETOFF_LEVEL(x)         (((x) & 0x3) << 12)
+#define         MEMRETCTRL              (1 << 8)
+#define         SETRET_LEVEL(x)         (((x) & 0x3) << 6)
+#define         VOLT_LEVEL(x)           (((x) & 0x3) << 0)
+
+#define OMAP24XX_PRCM_VBASE     IO_ADDRESS(OMAP24XX_PRCM_BASE)
+#define prcm_readl(r)           __raw_readl(OMAP24XX_PRCM_VBASE + (r))
+#define prcm_writel(v, r)       __raw_writel((v), OMAP24XX_PRCM_VBASE + (r))
+
+static u32 pmdomain_get_wakeup_dependencies(int domain_offset)
+{
+        return prcm_readl(domain_offset + PM_WKDEP_OFFSET);
+}
+
+static void pmdomain_set_wakeup_dependencies(u32 state, int domain_offset)
+{
+        prcm_writel(state, domain_offset + PM_WKDEP_OFFSET);
+}
+
+static u32 pmdomain_get_powerstate(int domain_offset)
+{
+        return prcm_readl(domain_offset + PM_PWSTCTRL_OFFSET);
+}
+
+static void pmdomain_set_powerstate(u32 state, int domain_offset)
+{
+        prcm_writel(state, domain_offset + PM_PWSTCTRL_OFFSET);
+}
+
+static u32 pmdomain_get_clock_autocontrol(int domain_offset)
+{
+        return prcm_readl(domain_offset + CM_CLKSTCTRL_OFFSET);
+}
+
+static void pmdomain_set_clock_autocontrol(u32 state, int domain_offset)
+{
+        prcm_writel(state, domain_offset + CM_CLKSTCTRL_OFFSET);
+}
+
+static u32 pmdomain_get_clock_autoidle1(int domain_offset)
+{
+        return prcm_readl(domain_offset + CM_AUTOIDLE1_OFFSET);
+}
+
+/* Core domain only */
+static u32 pmdomain_get_clock_autoidle2(int domain_offset)
+{
+        return prcm_readl(domain_offset + CM_AUTOIDLE2_OFFSET);
+}
+
+/* Core domain only */
+static u32 pmdomain_get_clock_autoidle3(int domain_offset)
+{
+        return prcm_readl(domain_offset + CM_AUTOIDLE3_OFFSET);
+}
+
+/* Core domain only */
+static u32 pmdomain_get_clock_autoidle4(int domain_offset)
+{
+        return prcm_readl(domain_offset + CM_AUTOIDLE4_OFFSET);
+}
+
+static void pmdomain_set_clock_autoidle1(u32 state, int domain_offset)
+{
+        prcm_writel(state, CM_AUTOIDLE1_OFFSET + domain_offset);
+}
+
+/* Core domain only */
+static void pmdomain_set_clock_autoidle2(u32 state, int domain_offset)
+{
+        prcm_writel(state, CM_AUTOIDLE2_OFFSET + domain_offset);
+}
+
+/* Core domain only */
+static void pmdomain_set_clock_autoidle3(u32 state, int domain_offset)
+{
+        prcm_writel(state, CM_AUTOIDLE3_OFFSET + domain_offset);
+}
+
+/* Core domain only */
+static void pmdomain_set_clock_autoidle4(u32 state, int domain_offset)
+{
+        prcm_writel(state, CM_AUTOIDLE4_OFFSET + domain_offset);
+}
+
+/*
+ * Configures power management domains to idle clocks automatically.
+ */
+void pmdomain_set_autoidle(void)
+{
+        u32 val;
+
+        /* Set PLL auto stop for 54M, 96M & DPLL */
+        pmdomain_set_clock_autoidle1(AUTO_54M(AUTO_STOPPED) |
+                                     AUTO_96M(AUTO_STOPPED) |
+                                     AUTO_DPLL(AUTO_STOPPED), PM_PLL_OFFSET);
+
+        /* External clock input control
+         * REVISIT: Should this be in clock framework?
+         */
+        PRCM_CLKSRC_CTRL |= (0x3 << 3);
+
+        /* Configure number of 32KHz clock cycles for sys_clk */
+        PRCM_CLKSSETUP = 0x00ff;
+
+        /* Configure automatic voltage transition */
+        PRCM_VOLTSETUP = 0;
+        val = PRCM_VOLTCTRL;
+        val &= ~(SETOFF_LEVEL(0x3) | VOLT_LEVEL(0x3));
+        val |= SETOFF_LEVEL(1) | VOLT_LEVEL(1) | AUTO_EXTVOLT;
+        PRCM_VOLTCTRL = val;
+
+        /* Disable emulation tools functional clock */
+        PRCM_CLKEMUL_CTRL = 0x0;
+
+        /* Set core memory retention state */
+        val = pmdomain_get_powerstate(PM_CORE_OFFSET);
+        if (cpu_is_omap2420()) {
+                val &= ~(0x7 << 3);
+                val |= (MEM3RETSTATE | MEM2RETSTATE | MEM1RETSTATE);
+        } else {
+                val &= ~(0xf << 3);
+                val |= (MEM4RETSTATE | MEM3RETSTATE | MEM2RETSTATE |
+                        MEM1RETSTATE);
+        }
+        pmdomain_set_powerstate(val, PM_CORE_OFFSET);
+
+        /* OCP interface smart idle. REVISIT: Enable autoidle bit0 ? */
+        val = SMS_SYSCONFIG;
+        val &= ~(0x3 << 3);
+        val |= (0x2 << 3) | (1 << 0);
+        SMS_SYSCONFIG |= val;
+
+        val = SDRC_SYSCONFIG;
+        val &= ~(0x3 << 3);
+        val |= (0x2 << 3);
+        SDRC_SYSCONFIG = val;
+
+        /* Configure L3 interface for smart idle.
+         * REVISIT: Enable autoidle bit0 ?
+         */
+        val = GPMC_SYSCONFIG;
+        val &= ~(0x3 << 3);
+        val |= (0x2 << 3) | (1 << 0);
+        GPMC_SYSCONFIG = val;
+
+        pmdomain_set_powerstate(LOGICRETSTATE | POWERSTATE_RETENTION,
+                                PM_MPU_OFFSET);
+        pmdomain_set_powerstate(POWERSTATE_RETENTION, PM_CORE_OFFSET);
+        if (!cpu_is_omap2420())
+                pmdomain_set_powerstate(POWERSTATE_RETENTION, PM_MDM_OFFSET);
+
+        /* Assume suspend function has saved the state for DSP and GFX */
+        pmdomain_set_powerstate(FORCESTATE | POWERSTATE_OFF, PM_DSP_OFFSET);
+        pmdomain_set_powerstate(FORCESTATE | POWERSTATE_OFF, PM_GFX_OFFSET);
+
+#if 0
+        /* REVISIT: Internal USB needs special handling */
+        force_standby_usb();
+        if (cpu_is_omap2430())
+                force_hsmmc();
+        sdram_self_refresh_on_idle_req(1);
+#endif
+
+        /* Enable clock auto control for all domains.
+         * Note that CORE domain includes also DSS, L4 & L3.
+         */
+        pmdomain_set_clock_autocontrol(AUTOSTAT_MPU, PM_MPU_OFFSET);
+        pmdomain_set_clock_autocontrol(AUTOSTAT_GFX, PM_GFX_OFFSET);
+        pmdomain_set_clock_autocontrol(AUTOSTAT_DSS | AUTOSTAT_L4 | AUTOSTAT_L3,
+                                       PM_CORE_OFFSET);
+        if (cpu_is_omap2420())
+                pmdomain_set_clock_autocontrol(AUTOSTAT_IVA | AUTOSTAT_DSP,
+                                               PM_DSP_OFFSET);
+        else {
+                pmdomain_set_clock_autocontrol(AUTOSTAT_DSP, PM_DSP_OFFSET);
+                pmdomain_set_clock_autocontrol(AUTOSTAT_MDM, PM_MDM_OFFSET);
+        }
+
+        /* Enable clock autoidle for all domains */
+        pmdomain_set_clock_autoidle1(0x2, PM_DSP_OFFSET);
+        if (cpu_is_omap2420()) {
+                pmdomain_set_clock_autoidle1(0xfffffff9, PM_CORE_OFFSET);
+                pmdomain_set_clock_autoidle2(0x7, PM_CORE_OFFSET);
+                pmdomain_set_clock_autoidle1(0x3f, PM_WKUP_OFFSET);
+        } else {
+                pmdomain_set_clock_autoidle1(0xeafffff1, PM_CORE_OFFSET);
+                pmdomain_set_clock_autoidle2(0xfff, PM_CORE_OFFSET);
+                pmdomain_set_clock_autoidle1(0x7f, PM_WKUP_OFFSET);
+                pmdomain_set_clock_autoidle1(0x3, PM_MDM_OFFSET);
+        }
+        pmdomain_set_clock_autoidle3(0x7, PM_CORE_OFFSET);
+        pmdomain_set_clock_autoidle4(0x1f, PM_CORE_OFFSET);
+}
+
+/*
+ * Initializes power domains by removing wake-up dependencies and powering
+ * down DSP and GFX. Gets called from PM init. Note that DSP and IVA code
+ * must re-enable DSP and GFX when used.
+ */
+void __init pmdomain_init(void)
+{
+        /* Remove all domain wakeup dependencies */
+        pmdomain_set_wakeup_dependencies(EN_WKUP | EN_CORE, PM_MPU_OFFSET);
+        pmdomain_set_wakeup_dependencies(0, PM_DSP_OFFSET);
+        pmdomain_set_wakeup_dependencies(0, PM_GFX_OFFSET);
+        pmdomain_set_wakeup_dependencies(EN_WKUP | EN_MPU, PM_CORE_OFFSET);
+        if (cpu_is_omap2430())
+                pmdomain_set_wakeup_dependencies(0, PM_MDM_OFFSET);
+
+        /* Power down DSP and GFX */
+        pmdomain_set_powerstate(POWERSTATE_OFF | FORCESTATE, PM_DSP_OFFSET);
+        pmdomain_set_powerstate(POWERSTATE_OFF | FORCESTATE, PM_GFX_OFFSET);
+}
diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c
index 562168fa2b16..d7eee99b7e3f 100644
--- a/arch/arm/mach-omap2/pm.c
+++ b/arch/arm/mach-omap2/pm.c
@@ -23,6 +23,7 @@
 #include <linux/interrupt.h>
 #include <linux/sysfs.h>
 #include <linux/module.h>
+#include <linux/delay.h>
 
 #include <asm/io.h>
 #include <asm/irq.h>
@@ -36,11 +37,18 @@
 #include <asm/arch/sram.h>
 #include <asm/arch/pm.h>
 
+#include "prcm-regs.h"
+
 static struct clk *vclk;
 static void (*omap2_sram_idle)(void);
 static void (*omap2_sram_suspend)(int dllctrl, int cpu_rev);
 static void (*saved_idle)(void);
 
+extern void __init pmdomain_init(void);
+extern void pmdomain_set_autoidle(void);
+
+static unsigned int omap24xx_sleep_save[OMAP24XX_SLEEP_SAVE_SIZE];
+
 void omap2_pm_idle(void)
 {
         local_irq_disable();
@@ -87,23 +95,272 @@ static int omap2_pm_prepare(suspend_state_t state)
         return error;
 }
 
+#define INT0_WAKE_MASK  (OMAP_IRQ_BIT(INT_24XX_GPIO_BANK1) |    \
+                        OMAP_IRQ_BIT(INT_24XX_GPIO_BANK2) |     \
+                        OMAP_IRQ_BIT(INT_24XX_GPIO_BANK3))
+
+#define INT1_WAKE_MASK  (OMAP_IRQ_BIT(INT_24XX_GPIO_BANK4))
+
+#define INT2_WAKE_MASK  (OMAP_IRQ_BIT(INT_24XX_UART1_IRQ) |     \
+                        OMAP_IRQ_BIT(INT_24XX_UART2_IRQ) |      \
+                        OMAP_IRQ_BIT(INT_24XX_UART3_IRQ))
+
+#define preg(reg)       printk("%s\t(0x%p):\t0x%08x\n", #reg, &reg, reg);
+
+static void omap2_pm_debug(char * desc)
+{
+        printk("%s:\n", desc);
+
+        preg(CM_CLKSTCTRL_MPU);
+        preg(CM_CLKSTCTRL_CORE);
+        preg(CM_CLKSTCTRL_GFX);
+        preg(CM_CLKSTCTRL_DSP);
+        preg(CM_CLKSTCTRL_MDM);
+
+        preg(PM_PWSTCTRL_MPU);
+        preg(PM_PWSTCTRL_CORE);
+        preg(PM_PWSTCTRL_GFX);
+        preg(PM_PWSTCTRL_DSP);
+        preg(PM_PWSTCTRL_MDM);
+
+        preg(PM_PWSTST_MPU);
+        preg(PM_PWSTST_CORE);
+        preg(PM_PWSTST_GFX);
+        preg(PM_PWSTST_DSP);
+        preg(PM_PWSTST_MDM);
+
+        preg(CM_AUTOIDLE1_CORE);
+        preg(CM_AUTOIDLE2_CORE);
+        preg(CM_AUTOIDLE3_CORE);
+        preg(CM_AUTOIDLE4_CORE);
+        preg(CM_AUTOIDLE_WKUP);
+        preg(CM_AUTOIDLE_PLL);
+        preg(CM_AUTOIDLE_DSP);
+        preg(CM_AUTOIDLE_MDM);
+
+        preg(CM_ICLKEN1_CORE);
+        preg(CM_ICLKEN2_CORE);
+        preg(CM_ICLKEN3_CORE);
+        preg(CM_ICLKEN4_CORE);
+        preg(CM_ICLKEN_GFX);
+        preg(CM_ICLKEN_WKUP);
+        preg(CM_ICLKEN_DSP);
+        preg(CM_ICLKEN_MDM);
+
+        preg(CM_IDLEST1_CORE);
+        preg(CM_IDLEST2_CORE);
+        preg(CM_IDLEST3_CORE);
+        preg(CM_IDLEST4_CORE);
+        preg(CM_IDLEST_GFX);
+        preg(CM_IDLEST_WKUP);
+        preg(CM_IDLEST_CKGEN);
+        preg(CM_IDLEST_DSP);
+        preg(CM_IDLEST_MDM);
+
+        preg(RM_RSTST_MPU);
+        preg(RM_RSTST_GFX);
+        preg(RM_RSTST_WKUP);
+        preg(RM_RSTST_DSP);
+        preg(RM_RSTST_MDM);
+
+        preg(PM_WKDEP_MPU);
+        preg(PM_WKDEP_CORE);
+        preg(PM_WKDEP_GFX);
+        preg(PM_WKDEP_DSP);
+        preg(PM_WKDEP_MDM);
+
+        preg(CM_FCLKEN_WKUP);
+        preg(CM_ICLKEN_WKUP);
+        preg(CM_IDLEST_WKUP);
+        preg(CM_AUTOIDLE_WKUP);
+        preg(CM_CLKSEL_WKUP);
+
+        preg(PM_WKEN_WKUP);
+        preg(PM_WKST_WKUP);
+}
+
+static inline void omap2_pm_save_registers(void)
+{
+        /* Save interrupt registers */
+        OMAP24XX_SAVE(INTC_MIR0);
+        OMAP24XX_SAVE(INTC_MIR1);
+        OMAP24XX_SAVE(INTC_MIR2);
+
+        /* Save power control registers */
+        OMAP24XX_SAVE(CM_CLKSTCTRL_MPU);
+        OMAP24XX_SAVE(CM_CLKSTCTRL_CORE);
+        OMAP24XX_SAVE(CM_CLKSTCTRL_GFX);
+        OMAP24XX_SAVE(CM_CLKSTCTRL_DSP);
+        OMAP24XX_SAVE(CM_CLKSTCTRL_MDM);
+
+        /* Save power state registers */
+        OMAP24XX_SAVE(PM_PWSTCTRL_MPU);
+        OMAP24XX_SAVE(PM_PWSTCTRL_CORE);
+        OMAP24XX_SAVE(PM_PWSTCTRL_GFX);
+        OMAP24XX_SAVE(PM_PWSTCTRL_DSP);
+        OMAP24XX_SAVE(PM_PWSTCTRL_MDM);
+
+        /* Save autoidle registers */
+        OMAP24XX_SAVE(CM_AUTOIDLE1_CORE);
+        OMAP24XX_SAVE(CM_AUTOIDLE2_CORE);
+        OMAP24XX_SAVE(CM_AUTOIDLE3_CORE);
+        OMAP24XX_SAVE(CM_AUTOIDLE4_CORE);
+        OMAP24XX_SAVE(CM_AUTOIDLE_WKUP);
+        OMAP24XX_SAVE(CM_AUTOIDLE_PLL);
+        OMAP24XX_SAVE(CM_AUTOIDLE_DSP);
+        OMAP24XX_SAVE(CM_AUTOIDLE_MDM);
+
+        /* Save idle state registers */
+        OMAP24XX_SAVE(CM_IDLEST1_CORE);
+        OMAP24XX_SAVE(CM_IDLEST2_CORE);
+        OMAP24XX_SAVE(CM_IDLEST3_CORE);
+        OMAP24XX_SAVE(CM_IDLEST4_CORE);
+        OMAP24XX_SAVE(CM_IDLEST_GFX);
+        OMAP24XX_SAVE(CM_IDLEST_WKUP);
+        OMAP24XX_SAVE(CM_IDLEST_CKGEN);
+        OMAP24XX_SAVE(CM_IDLEST_DSP);
+        OMAP24XX_SAVE(CM_IDLEST_MDM);
+
+        /* Save clock registers */
+        OMAP24XX_SAVE(CM_FCLKEN1_CORE);
+        OMAP24XX_SAVE(CM_FCLKEN2_CORE);
+        OMAP24XX_SAVE(CM_ICLKEN1_CORE);
+        OMAP24XX_SAVE(CM_ICLKEN2_CORE);
+        OMAP24XX_SAVE(CM_ICLKEN3_CORE);
+        OMAP24XX_SAVE(CM_ICLKEN4_CORE);
+}
+
+static inline void omap2_pm_restore_registers(void)
+{
+        /* Restore clock state registers */
+        OMAP24XX_RESTORE(CM_CLKSTCTRL_MPU);
+        OMAP24XX_RESTORE(CM_CLKSTCTRL_CORE);
+        OMAP24XX_RESTORE(CM_CLKSTCTRL_GFX);
+        OMAP24XX_RESTORE(CM_CLKSTCTRL_DSP);
+        OMAP24XX_RESTORE(CM_CLKSTCTRL_MDM);
+
+        /* Restore power state registers */
+        OMAP24XX_RESTORE(PM_PWSTCTRL_MPU);
+        OMAP24XX_RESTORE(PM_PWSTCTRL_CORE);
+        OMAP24XX_RESTORE(PM_PWSTCTRL_GFX);
+        OMAP24XX_RESTORE(PM_PWSTCTRL_DSP);
+        OMAP24XX_RESTORE(PM_PWSTCTRL_MDM);
+
+        /* Restore idle state registers */
+        OMAP24XX_RESTORE(CM_IDLEST1_CORE);
+        OMAP24XX_RESTORE(CM_IDLEST2_CORE);
+        OMAP24XX_RESTORE(CM_IDLEST3_CORE);
+        OMAP24XX_RESTORE(CM_IDLEST4_CORE);
+        OMAP24XX_RESTORE(CM_IDLEST_GFX);
+        OMAP24XX_RESTORE(CM_IDLEST_WKUP);
+        OMAP24XX_RESTORE(CM_IDLEST_CKGEN);
+        OMAP24XX_RESTORE(CM_IDLEST_DSP);
+        OMAP24XX_RESTORE(CM_IDLEST_MDM);
+
+        /* Restore autoidle registers */
+        OMAP24XX_RESTORE(CM_AUTOIDLE1_CORE);
+        OMAP24XX_RESTORE(CM_AUTOIDLE2_CORE);
+        OMAP24XX_RESTORE(CM_AUTOIDLE3_CORE);
+        OMAP24XX_RESTORE(CM_AUTOIDLE4_CORE);
+        OMAP24XX_RESTORE(CM_AUTOIDLE_WKUP);
+        OMAP24XX_RESTORE(CM_AUTOIDLE_PLL);
+        OMAP24XX_RESTORE(CM_AUTOIDLE_DSP);
+        OMAP24XX_RESTORE(CM_AUTOIDLE_MDM);
+
+        /* Restore clock registers */
+        OMAP24XX_RESTORE(CM_FCLKEN1_CORE);
+        OMAP24XX_RESTORE(CM_FCLKEN2_CORE);
+        OMAP24XX_RESTORE(CM_ICLKEN1_CORE);
+        OMAP24XX_RESTORE(CM_ICLKEN2_CORE);
+        OMAP24XX_RESTORE(CM_ICLKEN3_CORE);
+        OMAP24XX_RESTORE(CM_ICLKEN4_CORE);
+
+        /* REVISIT: Clear interrupts here */
+
+        /* Restore interrupt registers */
+        OMAP24XX_RESTORE(INTC_MIR0);
+        OMAP24XX_RESTORE(INTC_MIR1);
+        OMAP24XX_RESTORE(INTC_MIR2);
+}
+
+static int omap2_pm_suspend(void)
+{
+        int processor_type = 0;
+
+        /* REVISIT: 0x21 or 0x26? */
+        if (cpu_is_omap2420())
+                processor_type = 0x21;
+
+        if (!processor_type)
+                return -ENOTSUPP;
+
+        local_irq_disable();
+        local_fiq_disable();
+
+        omap2_pm_save_registers();
+
+        /* Disable interrupts except for the wake events */
+        INTC_MIR_SET0 = 0xffffffff & ~INT0_WAKE_MASK;
+        INTC_MIR_SET1 = 0xffffffff & ~INT1_WAKE_MASK;
+        INTC_MIR_SET2 = 0xffffffff & ~INT2_WAKE_MASK;
+
+        pmdomain_set_autoidle();
+
+        /* Clear old wake-up events */
+        PM_WKST1_CORE = 0;
+        PM_WKST2_CORE = 0;
+        PM_WKST_WKUP = 0;
+
+        /* Enable wake-up events */
+        PM_WKEN1_CORE = (1 << 22) | (1 << 21);  /* UART1 & 2 */
+        PM_WKEN2_CORE = (1 << 2);               /* UART3 */
+        PM_WKEN_WKUP = (1 << 2) | (1 << 0);     /* GPIO & GPT1 */
+
+        /* Disable clocks except for CM_ICLKEN2_CORE. It gets disabled
+         * in the SRAM suspend code */
+        CM_FCLKEN1_CORE = 0;
+        CM_FCLKEN2_CORE = 0;
+        CM_ICLKEN1_CORE = 0;
+        CM_ICLKEN3_CORE = 0;
+        CM_ICLKEN4_CORE = 0;
+
+        omap2_pm_debug("Status before suspend");
+
+        /* Must wait for serial buffers to clear */
+        mdelay(200);
+
+        /* Jump to SRAM suspend code
+         * REVISIT: When is this SDRC_DLLB_CTRL?
+         */
+        omap2_sram_suspend(SDRC_DLLA_CTRL, processor_type);
+
+        /* Back from sleep */
+        omap2_pm_restore_registers();
+
+        local_fiq_enable();
+        local_irq_enable();
+
+        return 0;
+}
+
 static int omap2_pm_enter(suspend_state_t state)
 {
+        int ret = 0;
+
         switch (state)
         {
         case PM_SUSPEND_STANDBY:
         case PM_SUSPEND_MEM:
-                /* FIXME: Add suspend */
+                ret = omap2_pm_suspend();
                 break;
-
         case PM_SUSPEND_DISK:
-                return -ENOTSUPP;
-
+                ret = -ENOTSUPP;
+                break;
         default:
-                return -EINVAL;
+                ret = -EINVAL;
         }
 
-        return 0;
+        return ret;
 }
 
 static int omap2_pm_finish(suspend_state_t state)
@@ -143,6 +400,8 @@ int __init omap2_pm_init(void)
         pm_set_ops(&omap_pm_ops);
         pm_idle = omap2_pm_idle;
 
+        pmdomain_init();
+
         return 0;
 }
 
diff --git a/arch/arm/mach-omap2/timer-gp.c b/arch/arm/mach-omap2/timer-gp.c
index 1d2f5ac2f69b..cf78e6c5a277 100644
--- a/arch/arm/mach-omap2/timer-gp.c
+++ b/arch/arm/mach-omap2/timer-gp.c
@@ -6,6 +6,7 @@
  * Copyright (C) 2005 Nokia Corporation
  * Author: Paul Mundt <paul.mundt@nokia.com>
  *         Juha Yrjölä <juha.yrjola@nokia.com>
+ * OMAP Dual-mode timer framework support by Timo Teras
  *
  * Some parts based off of TI's 24xx code:
  *
@@ -22,54 +23,18 @@
 #include <linux/interrupt.h>
 #include <linux/err.h>
 #include <linux/clk.h>
+#include <linux/delay.h>
 
 #include <asm/mach/time.h>
-#include <asm/delay.h>
-#include <asm/io.h>
+#include <asm/arch/dmtimer.h>
 
-#define OMAP2_GP_TIMER1_BASE    0x48028000
-#define OMAP2_GP_TIMER2_BASE    0x4802a000
-#define OMAP2_GP_TIMER3_BASE    0x48078000
-#define OMAP2_GP_TIMER4_BASE    0x4807a000
+static struct omap_dm_timer *gptimer;
 
-#define GP_TIMER_TIDR           0x00
-#define GP_TIMER_TISR           0x18
-#define GP_TIMER_TIER           0x1c
-#define GP_TIMER_TCLR           0x24
-#define GP_TIMER_TCRR           0x28
-#define GP_TIMER_TLDR           0x2c
-#define GP_TIMER_TSICR          0x40
-
-#define OS_TIMER_NR             1  /* GP timer 2 */
-
-static unsigned long timer_base[] = {
-        IO_ADDRESS(OMAP2_GP_TIMER1_BASE),
-        IO_ADDRESS(OMAP2_GP_TIMER2_BASE),
-        IO_ADDRESS(OMAP2_GP_TIMER3_BASE),
-        IO_ADDRESS(OMAP2_GP_TIMER4_BASE),
-};
-
-static inline unsigned int timer_read_reg(int nr, unsigned int reg)
-{
-        return __raw_readl(timer_base[nr] + reg);
-}
-
-static inline void timer_write_reg(int nr, unsigned int reg, unsigned int val)
-{
-        __raw_writel(val, timer_base[nr] + reg);
-}
-
-/* Note that we always enable the clock prescale divider bit */
-static inline void omap2_gp_timer_start(int nr, unsigned long load_val)
+static inline void omap2_gp_timer_start(unsigned long load_val)
 {
-        unsigned int tmp;
-
-        tmp = 0xffffffff - load_val;
-
-        timer_write_reg(nr, GP_TIMER_TLDR, tmp);
-        timer_write_reg(nr, GP_TIMER_TCRR, tmp);
-        timer_write_reg(nr, GP_TIMER_TIER, 1 << 1);
-        timer_write_reg(nr, GP_TIMER_TCLR, (1 << 5) | (1 << 1) | 1);
+        omap_dm_timer_set_load(gptimer, 1, 0xffffffff - load_val);
+        omap_dm_timer_set_int_enable(gptimer, OMAP_TIMER_INT_OVERFLOW);
+        omap_dm_timer_start(gptimer);
 }
 
 static irqreturn_t omap2_gp_timer_interrupt(int irq, void *dev_id,
@@ -77,7 +42,7 @@ static irqreturn_t omap2_gp_timer_interrupt(int irq, void *dev_id,
 {
         write_seqlock(&xtime_lock);
 
-        timer_write_reg(OS_TIMER_NR, GP_TIMER_TISR, 1 << 1);
+        omap_dm_timer_write_status(gptimer, OMAP_TIMER_INT_OVERFLOW);
         timer_tick(regs);
 
         write_sequnlock(&xtime_lock);
@@ -87,41 +52,26 @@ static irqreturn_t omap2_gp_timer_interrupt(int irq, void *dev_id,
 
 static struct irqaction omap2_gp_timer_irq = {
         .name           = "gp timer",
-        .flags          = SA_INTERRUPT,
+        .flags          = SA_INTERRUPT | SA_TIMER,
         .handler        = omap2_gp_timer_interrupt,
 };
 
 static void __init omap2_gp_timer_init(void)
 {
-        struct clk * sys_ck;
-        u32 tick_period = 120000;
-        u32 l;
+        u32 tick_period;
 
-        /* Reset clock and prescale value */
-        timer_write_reg(OS_TIMER_NR, GP_TIMER_TCLR, 0);
+        omap_dm_timer_init();
+        gptimer = omap_dm_timer_request_specific(1);
+        BUG_ON(gptimer == NULL);
 
-        sys_ck = clk_get(NULL, "sys_ck");
-        if (IS_ERR(sys_ck))
-                printk(KERN_ERR "Could not get sys_ck\n");
-        else {
-                clk_enable(sys_ck);
-                tick_period = clk_get_rate(sys_ck) / 100;
-                clk_put(sys_ck);
-        }
-
-        tick_period /= 2;       /* Minimum prescale divider is 2 */
+        omap_dm_timer_set_source(gptimer, OMAP_TIMER_SRC_SYS_CLK);
+        tick_period = clk_get_rate(omap_dm_timer_get_fclk(gptimer)) / 100;
         tick_period -= 1;
 
-        l = timer_read_reg(OS_TIMER_NR, GP_TIMER_TIDR);
-        printk(KERN_INFO "OMAP2 GP timer (HW version %d.%d)\n",
-               (l >> 4) & 0x0f, l & 0x0f);
-
-        setup_irq(38, &omap2_gp_timer_irq);
-
-        omap2_gp_timer_start(OS_TIMER_NR, tick_period);
+        setup_irq(omap_dm_timer_get_irq(gptimer), &omap2_gp_timer_irq);
+        omap2_gp_timer_start(tick_period);
 }
 
 struct sys_timer omap_timer = {
         .init   = omap2_gp_timer_init,
 };
-
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index ea5137f319c4..03d07cae26c8 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -35,6 +35,10 @@ config PXA_SHARPSL
           SL-C3000 (Spitz), SL-C3100 (Borzoi) or SL-C6000x (Tosa)
           handheld computer.
 
+config MACH_TRIZEPS4
+        bool "Keith und Koep Trizeps4 DIMM-Module"
+        select PXA27x
+
 endchoice
 
 if PXA_SHARPSL
@@ -55,6 +59,21 @@ endchoice
 
 endif
 
+if MACH_TRIZEPS4
+
+choice
+        prompt "Select base board for Trizeps 4 module"
+
+config MACH_TRIZEPS4_CONXS
+        bool "ConXS Eval Board"
+
+config MACH_TRIZEPS4_ANY
+        bool "another Board"
+
+endchoice
+
+endif
+
 endmenu
 
 config MACH_POODLE
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index 1610690be419..9093eb1c94eb 100644
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -12,6 +12,7 @@ obj-$(CONFIG_ARCH_LUBBOCK) += lubbock.o
 obj-$(CONFIG_MACH_LOGICPD_PXA270) += lpd270.o
 obj-$(CONFIG_MACH_MAINSTONE) += mainstone.o
 obj-$(CONFIG_ARCH_PXA_IDP) += idp.o
+obj-$(CONFIG_MACH_TRIZEPS4)     += trizeps4.o
 obj-$(CONFIG_PXA_SHARP_C7xx)    += corgi.o corgi_ssp.o corgi_lcd.o sharpsl_pm.o corgi_pm.o
 obj-$(CONFIG_PXA_SHARP_Cxx00)   += spitz.o corgi_ssp.o corgi_lcd.o sharpsl_pm.o spitz_pm.o
 obj-$(CONFIG_MACH_AKITA)        += akita-ioexp.o
@@ -23,6 +24,7 @@ led-y := leds.o
 led-$(CONFIG_ARCH_LUBBOCK) += leds-lubbock.o
 led-$(CONFIG_MACH_MAINSTONE) += leds-mainstone.o
 led-$(CONFIG_ARCH_PXA_IDP) += leds-idp.o
+led-$(CONFIG_MACH_TRIZEPS4) += leds-trizeps4.o
 
 obj-$(CONFIG_LEDS) += $(led-y)
 
diff --git a/arch/arm/mach-pxa/leds-trizeps4.c b/arch/arm/mach-pxa/leds-trizeps4.c
new file mode 100644
index 000000000000..14cfc85e44b5
--- /dev/null
+++ b/arch/arm/mach-pxa/leds-trizeps4.c
@@ -0,0 +1,134 @@
+/*
+ * linux/arch/arm/mach-pxa/leds-trizeps4.c
+ *
+ *  Author:     Jürgen Schindele
+ *  Created:    20 02, 2006
+ *  Copyright:  Jürgen Schindele
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/config.h>
+#include <linux/init.h>
+
+#include <asm/hardware.h>
+#include <asm/system.h>
+#include <asm/types.h>
+#include <asm/leds.h>
+
+#include <asm/arch/pxa-regs.h>
+#include <asm/arch/trizeps4.h>
+
+#include "leds.h"
+
+#define LED_STATE_ENABLED       1
+#define LED_STATE_CLAIMED       2
+
+#define SYS_BUSY                0x01
+#define HEARTBEAT               0x02
+#define BLINK                   0x04
+
+static unsigned int led_state;
+static unsigned int hw_led_state;
+
+void trizeps4_leds_event(led_event_t evt)
+{
+        unsigned long flags;
+
+        local_irq_save(flags);
+
+        switch (evt) {
+        case led_start:
+                hw_led_state = 0;
+                pxa_gpio_mode( GPIO_SYS_BUSY_LED  | GPIO_OUT);          /* LED1 */
+                pxa_gpio_mode( GPIO_HEARTBEAT_LED | GPIO_OUT);          /* LED2 */
+                led_state = LED_STATE_ENABLED;
+                break;
+
+        case led_stop:
+                led_state &= ~LED_STATE_ENABLED;
+                break;
+
+        case led_claim:
+                led_state |= LED_STATE_CLAIMED;
+                hw_led_state = 0;
+                break;
+
+        case led_release:
+                led_state &= ~LED_STATE_CLAIMED;
+                hw_led_state = 0;
+                break;
+
+#ifdef CONFIG_LEDS_TIMER
+        case led_timer:
+                hw_led_state ^= HEARTBEAT;
+                break;
+#endif
+
+#ifdef CONFIG_LEDS_CPU
+        case led_idle_start:
+                hw_led_state &= ~SYS_BUSY;
+                break;
+
+        case led_idle_end:
+                hw_led_state |= SYS_BUSY;
+                break;
+#endif
+
+        case led_halted:
+                break;
+
+        case led_green_on:
+                hw_led_state |= BLINK;
+                break;
+
+        case led_green_off:
+                hw_led_state &= ~BLINK;
+                break;
+
+        case led_amber_on:
+                break;
+
+        case led_amber_off:
+                break;
+
+        case led_red_on:
+                break;
+
+        case led_red_off:
+                break;
+
+        default:
+                break;
+        }
+
+        if  (led_state & LED_STATE_ENABLED) {
+                switch (hw_led_state) {
+                        case 0:
+                                GPSR(GPIO_SYS_BUSY_LED)  |= GPIO_bit(GPIO_SYS_BUSY_LED);
+                                GPSR(GPIO_HEARTBEAT_LED) |= GPIO_bit(GPIO_HEARTBEAT_LED);
+                                break;
+                        case 1:
+                                GPCR(GPIO_SYS_BUSY_LED)  |= GPIO_bit(GPIO_SYS_BUSY_LED);
+                                GPSR(GPIO_HEARTBEAT_LED) |= GPIO_bit(GPIO_HEARTBEAT_LED);
+                                break;
+                        case 2:
+                                GPSR(GPIO_SYS_BUSY_LED)  |= GPIO_bit(GPIO_SYS_BUSY_LED);
+                                GPCR(GPIO_HEARTBEAT_LED) |= GPIO_bit(GPIO_HEARTBEAT_LED);
+                                break;
+                        case 3:
+                                GPCR(GPIO_SYS_BUSY_LED)  |= GPIO_bit(GPIO_SYS_BUSY_LED);
+                                GPCR(GPIO_HEARTBEAT_LED) |= GPIO_bit(GPIO_HEARTBEAT_LED);
+                                break;
+                }
+        }
+        else {
+                /* turn all off */
+                GPSR(GPIO_SYS_BUSY_LED)  |= GPIO_bit(GPIO_SYS_BUSY_LED);
+                GPSR(GPIO_HEARTBEAT_LED) |= GPIO_bit(GPIO_HEARTBEAT_LED);
+        }
+
+        local_irq_restore(flags);
+}
diff --git a/arch/arm/mach-pxa/leds.c b/arch/arm/mach-pxa/leds.c
index bbe4d5f6afaa..e13eb841e48d 100644
--- a/arch/arm/mach-pxa/leds.c
+++ b/arch/arm/mach-pxa/leds.c
@@ -24,6 +24,8 @@ pxa_leds_init(void)
                 leds_event = mainstone_leds_event;
         if (machine_is_pxa_idp())
                 leds_event = idp_leds_event;
+        if (machine_is_trizeps4())
+                leds_event = trizeps4_leds_event;
 
         leds_event(led_start);
         return 0;
diff --git a/arch/arm/mach-pxa/leds.h b/arch/arm/mach-pxa/leds.h
index d98f6e93c12b..4f829b8c39dd 100644
--- a/arch/arm/mach-pxa/leds.h
+++ b/arch/arm/mach-pxa/leds.h
@@ -10,3 +10,4 @@
 extern void idp_leds_event(led_event_t evt);
 extern void lubbock_leds_event(led_event_t evt);
 extern void mainstone_leds_event(led_event_t evt);
+extern void trizeps4_leds_event(led_event_t evt);
diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c
index ec0f43a102c7..1a5f5c21481e 100644
--- a/arch/arm/mach-pxa/lpd270.c
+++ b/arch/arm/mach-pxa/lpd270.c
@@ -248,58 +248,137 @@ static void lpd270_backlight_power(int on)
 
 /* 5.7" TFT QVGA (LoLo display number 1) */
 static struct pxafb_mach_info sharp_lq057q3dc02 __initdata = {
-        .pixclock               = 100000,
-        .xres                   = 240,
-        .yres                   = 320,
+        .pixclock               = 150000,
+        .xres                   = 320,
+        .yres                   = 240,
         .bpp                    = 16,
-        .hsync_len              = 64,
-        .left_margin            = 0x27,
-        .right_margin           = 0x09,
-        .vsync_len              = 0x04,
+        .hsync_len              = 0x14,
+        .left_margin            = 0x28,
+        .right_margin           = 0x0a,
+        .vsync_len              = 0x02,
         .upper_margin           = 0x08,
         .lower_margin           = 0x14,
-        .sync                   = 0,
+        .sync                   = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
         .lccr0                  = 0x07800080,
-        .lccr3                  = 0x04400007,
+        .lccr3                  = 0x00400000,
+        .pxafb_backlight_power  = lpd270_backlight_power,
+};
+
+/* 12.1" TFT SVGA (LoLo display number 2) */
+static struct pxafb_mach_info sharp_lq121s1dg31 __initdata = {
+        .pixclock               = 50000,
+        .xres                   = 800,
+        .yres                   = 600,
+        .bpp                    = 16,
+        .hsync_len              = 0x05,
+        .left_margin            = 0x52,
+        .right_margin           = 0x05,
+        .vsync_len              = 0x04,
+        .upper_margin           = 0x14,
+        .lower_margin           = 0x0a,
+        .sync                   = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+        .lccr0                  = 0x07800080,
+        .lccr3                  = 0x00400000,
+        .pxafb_backlight_power  = lpd270_backlight_power,
+};
+
+/* 3.6" TFT QVGA (LoLo display number 3) */
+static struct pxafb_mach_info sharp_lq036q1da01 __initdata = {
+        .pixclock               = 150000,
+        .xres                   = 320,
+        .yres                   = 240,
+        .bpp                    = 16,
+        .hsync_len              = 0x0e,
+        .left_margin            = 0x04,
+        .right_margin           = 0x0a,
+        .vsync_len              = 0x03,
+        .upper_margin           = 0x03,
+        .lower_margin           = 0x03,
+        .sync                   = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+        .lccr0                  = 0x07800080,
+        .lccr3                  = 0x00400000,
         .pxafb_backlight_power  = lpd270_backlight_power,
 };
 
 /* 6.4" TFT VGA (LoLo display number 5) */
 static struct pxafb_mach_info sharp_lq64d343 __initdata = {
-        .pixclock               = 20000,
+        .pixclock               = 25000,
         .xres                   = 640,
         .yres                   = 480,
         .bpp                    = 16,
-        .hsync_len              = 49,
+        .hsync_len              = 0x31,
         .left_margin            = 0x89,
         .right_margin           = 0x19,
-        .vsync_len              = 18,
+        .vsync_len              = 0x12,
         .upper_margin           = 0x22,
-        .lower_margin           = 0,
+        .lower_margin           = 0x00,
         .sync                   = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
         .lccr0                  = 0x07800080,
-        .lccr3                  = 0x04400001,
+        .lccr3                  = 0x00400000,
+        .pxafb_backlight_power  = lpd270_backlight_power,
+};
+
+/* 10.4" TFT VGA (LoLo display number 7) */
+static struct pxafb_mach_info sharp_lq10d368 __initdata = {
+        .pixclock               = 25000,
+        .xres                   = 640,
+        .yres                   = 480,
+        .bpp                    = 16,
+        .hsync_len              = 0x31,
+        .left_margin            = 0x89,
+        .right_margin           = 0x19,
+        .vsync_len              = 0x12,
+        .upper_margin           = 0x22,
+        .lower_margin           = 0x00,
+        .sync                   = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+        .lccr0                  = 0x07800080,
+        .lccr3                  = 0x00400000,
         .pxafb_backlight_power  = lpd270_backlight_power,
 };
 
 /* 3.5" TFT QVGA (LoLo display number 8) */
 static struct pxafb_mach_info sharp_lq035q7db02_20 __initdata = {
-        .pixclock               = 100000,
+        .pixclock               = 150000,
         .xres                   = 240,
         .yres                   = 320,
         .bpp                    = 16,
-        .hsync_len              = 0x34,
-        .left_margin            = 0x09,
-        .right_margin           = 0x09,
-        .vsync_len              = 0x08,
+        .hsync_len              = 0x0e,
+        .left_margin            = 0x0a,
+        .right_margin           = 0x0a,
+        .vsync_len              = 0x03,
         .upper_margin           = 0x05,
         .lower_margin           = 0x14,
-        .sync                   = 0,
+        .sync                   = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
         .lccr0                  = 0x07800080,
-        .lccr3                  = 0x04400007,
+        .lccr3                  = 0x00400000,
         .pxafb_backlight_power  = lpd270_backlight_power,
 };
 
+static struct pxafb_mach_info *lpd270_lcd_to_use;
+
+static int __init lpd270_set_lcd(char *str)
+{
+        if (!strnicmp(str, "lq057q3dc02", 11)) {
+                lpd270_lcd_to_use = &sharp_lq057q3dc02;
+        } else if (!strnicmp(str, "lq121s1dg31", 11)) {
+                lpd270_lcd_to_use = &sharp_lq121s1dg31;
+        } else if (!strnicmp(str, "lq036q1da01", 11)) {
+                lpd270_lcd_to_use = &sharp_lq036q1da01;
+        } else if (!strnicmp(str, "lq64d343", 8)) {
+                lpd270_lcd_to_use = &sharp_lq64d343;
+        } else if (!strnicmp(str, "lq10d368", 8)) {
+                lpd270_lcd_to_use = &sharp_lq10d368;
+        } else if (!strnicmp(str, "lq035q7db02-20", 14)) {
+                lpd270_lcd_to_use = &sharp_lq035q7db02_20;
+        } else {
+                printk(KERN_INFO "lpd270: unknown lcd panel [%s]\n", str);
+        }
+
+        return 1;
+}
+
+__setup("lcd=", lpd270_set_lcd);
+
 static struct platform_device *platform_devices[] __initdata = {
         &smc91x_device,
         &lpd270_audio_device,
@@ -345,9 +424,8 @@ static void __init lpd270_init(void)
 
         platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
 
-        // set_pxa_fb_info(&sharp_lq057q3dc02);
-        set_pxa_fb_info(&sharp_lq64d343);
-        // set_pxa_fb_info(&sharp_lq035q7db02_20);
+        if (lpd270_lcd_to_use != NULL)
+                set_pxa_fb_info(lpd270_lcd_to_use);
 
         pxa_set_ohci_info(&lpd270_ohci_platform_data);
 }
diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c
new file mode 100644
index 000000000000..4ffff9e95eca
--- /dev/null
+++ b/arch/arm/mach-pxa/trizeps4.c
@@ -0,0 +1,471 @@
+/*
+ *  linux/arch/arm/mach-pxa/trizeps4.c
+ *
+ *  Support for the Keith und Koep Trizeps4 Module Platform.
+ *
+ *  Author:     Jürgen Schindele
+ *  Created:    20 02, 2006
+ *  Copyright:  Jürgen Schindele
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/sysdev.h>
+#include <linux/interrupt.h>
+#include <linux/sched.h>
+#include <linux/bitops.h>
+#include <linux/fb.h>
+#include <linux/ioport.h>
+#include <linux/delay.h>
+#include <linux/serial_8250.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/types.h>
+#include <asm/setup.h>
+#include <asm/memory.h>
+#include <asm/mach-types.h>
+#include <asm/hardware.h>
+#include <asm/irq.h>
+#include <asm/sizes.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/flash.h>
+
+#include <asm/arch/pxa-regs.h>
+#include <asm/arch/trizeps4.h>
+#include <asm/arch/audio.h>
+#include <asm/arch/pxafb.h>
+#include <asm/arch/mmc.h>
+#include <asm/arch/irda.h>
+#include <asm/arch/ohci.h>
+
+#include "generic.h"
+
+/********************************************************************************************
+ * ONBOARD FLASH
+ ********************************************************************************************/
+static struct mtd_partition trizeps4_partitions[] = {
+        {
+                .name =         "Bootloader",
+                .size =         0x00040000,
+                .offset =       0,
+                .mask_flags =   MTD_WRITEABLE  /* force read-only */
+        },{
+                .name =         "Kernel",
+                .size =         0x00400000,
+                .offset =       0x00040000
+        },{
+                .name =         "Filesystem",
+                .size =         MTDPART_SIZ_FULL,
+                .offset =       0x00440000
+        }
+};
+
+static struct flash_platform_data trizeps4_flash_data[] = {
+        {
+                .map_name       = "cfi_probe",
+                .parts          = trizeps4_partitions,
+                .nr_parts       = ARRAY_SIZE(trizeps4_partitions)
+        }
+};
+
+static struct resource flash_resource = {
+        .start  = PXA_CS0_PHYS,
+        .end    = PXA_CS0_PHYS + SZ_64M - 1,
+        .flags  = IORESOURCE_MEM,
+};
+
+static struct platform_device flash_device = {
+        .name           = "pxa2xx-flash",
+        .id             = 0,
+        .dev = {
+                .platform_data = &trizeps4_flash_data,
+        },
+        .resource = &flash_resource,
+        .num_resources = 1,
+};
+
+/********************************************************************************************
+ * DAVICOM DM9000 Ethernet
+ ********************************************************************************************/
+static struct resource dm9000_resources[] = {
+        [0] = {
+                .start  = TRIZEPS4_ETH_PHYS+0x300,
+                .end    = TRIZEPS4_ETH_PHYS+0x400-1,
+                .flags  = IORESOURCE_MEM,
+        },
+        [1] = {
+                .start  = TRIZEPS4_ETH_PHYS+0x8300,
+                .end    = TRIZEPS4_ETH_PHYS+0x8400-1,
+                .flags  = IORESOURCE_MEM,
+        },
+        [2] = {
+                .start  = TRIZEPS4_ETH_IRQ,
+                .end    = TRIZEPS4_ETH_IRQ,
+                .flags  = (IORESOURCE_IRQ | IRQT_RISING),
+        },
+};
+
+static struct platform_device dm9000_device = {
+        .name           = "dm9000",
+        .id             = -1,
+        .num_resources  = ARRAY_SIZE(dm9000_resources),
+        .resource       = dm9000_resources,
+};
+
+/********************************************************************************************
+ * PXA270 serial ports
+ ********************************************************************************************/
+static struct plat_serial8250_port tri_serial_ports[] = {
+#ifdef CONFIG_SERIAL_PXA
+        /* this uses the own PXA driver */
+        {
+                0,
+        },
+#else
+        /* this uses the generic 8520 driver */
+        [0] = {
+                .membase        = (void *)&FFUART,
+                .irq            = IRQ_FFUART,
+                .flags          = UPF_BOOT_AUTOCONF,
+                .iotype         = UPIO_MEM32,
+                .regshift       = 2,
+                .uartclk        = (921600*16),
+        },
+        [1] = {
+                .membase        = (void *)&BTUART,
+                .irq            = IRQ_BTUART,
+                .flags          = UPF_BOOT_AUTOCONF,
+                .iotype         = UPIO_MEM32,
+                .regshift       = 2,
+                .uartclk        = (921600*16),
+        },
+        {
+                0,
+        },
+#endif
+};
+
+static struct platform_device uart_devices = {
+        .name           = "serial8250",
+        .id             = 0,
+        .dev            = {
+                .platform_data  = tri_serial_ports,
+        },
+        .num_resources  = 0,
+        .resource       = NULL,
+};
+
+/********************************************************************************************
+ * PXA270 ac97 sound codec
+ ********************************************************************************************/
+static struct platform_device ac97_audio_device = {
+        .name           = "pxa2xx-ac97",
+        .id             = -1,
+};
+
+static struct platform_device * trizeps4_devices[] __initdata = {
+        &flash_device,
+        &uart_devices,
+        &dm9000_device,
+        &ac97_audio_device,
+};
+
+#ifdef CONFIG_MACH_TRIZEPS4_CONXS
+static short trizeps_conxs_bcr;
+
+/* PCCARD power switching supports only 3,3V */
+void board_pcmcia_power(int power)
+{
+        if (power) {
+                /* switch power on, put in reset and enable buffers */
+                trizeps_conxs_bcr |= power;
+                trizeps_conxs_bcr |= ConXS_BCR_CF_RESET;
+                trizeps_conxs_bcr &= ~(ConXS_BCR_CF_BUF_EN);
+                ConXS_BCR = trizeps_conxs_bcr;
+                /* wait a little */
+                udelay(2000);
+                /* take reset away */
+                trizeps_conxs_bcr &= ~(ConXS_BCR_CF_RESET);
+                ConXS_BCR = trizeps_conxs_bcr;
+                udelay(2000);
+        } else {
+                /* put in reset */
+                trizeps_conxs_bcr |= ConXS_BCR_CF_RESET;
+                ConXS_BCR = trizeps_conxs_bcr;
+                udelay(1000);
+                /* switch power off */
+                trizeps_conxs_bcr &= ~(0xf);
+                ConXS_BCR = trizeps_conxs_bcr;
+
+        }
+        pr_debug("%s: o%s 0x%x\n", __FUNCTION__, power ? "n": "ff", trizeps_conxs_bcr);
+}
+
+/* backlight power switching for LCD panel */
+static void board_backlight_power(int on)
+{
+        if (on) {
+                trizeps_conxs_bcr |= ConXS_BCR_L_DISP;
+        } else {
+                trizeps_conxs_bcr &= ~ConXS_BCR_L_DISP;
+        }
+        pr_debug("%s: o%s 0x%x\n", __FUNCTION__, on ? "n" : "ff", trizeps_conxs_bcr);
+        ConXS_BCR = trizeps_conxs_bcr;
+}
+
+/* Powersupply for MMC/SD cardslot */
+static void board_mci_power(struct device *dev, unsigned int vdd)
+{
+        struct pxamci_platform_data* p_d = dev->platform_data;
+
+        if (( 1 << vdd) & p_d->ocr_mask) {
+                pr_debug("%s: on\n", __FUNCTION__);
+                /* FIXME fill in values here */
+        } else {
+                pr_debug("%s: off\n", __FUNCTION__);
+                /* FIXME fill in values here */
+        }
+}
+
+static short trizeps_conxs_ircr;
+
+/* Switch modes and Power for IRDA receiver */
+static void board_irda_mode(struct device *dev, int mode)
+{
+        unsigned long flags;
+
+        local_irq_save(flags);
+        if (mode & IR_SIRMODE) {
+                /* Slow mode */
+                trizeps_conxs_ircr &= ~ConXS_IRCR_MODE;
+        } else if (mode & IR_FIRMODE) {
+                /* Fast mode */
+                trizeps_conxs_ircr |= ConXS_IRCR_MODE;
+        }
+        if (mode & IR_OFF) {
+                trizeps_conxs_ircr |= ConXS_IRCR_SD;
+        } else {
+                trizeps_conxs_ircr &= ~ConXS_IRCR_SD;
+        }
+        /* FIXME write values to register */
+        local_irq_restore(flags);
+}
+
+#else
+/* for other baseboards define dummies */
+void board_pcmcia_power(int power)      {;}
+#define board_backlight_power           NULL
+#define board_mci_power                 NULL
+#define board_irda_mode                 NULL
+
+#endif          /* CONFIG_MACH_TRIZEPS4_CONXS */
+EXPORT_SYMBOL(board_pcmcia_power);
+
+static int trizeps4_mci_init(struct device *dev, irqreturn_t (*mci_detect_int)(int, void *, struct pt_regs *), void *data)
+{
+        int err;
+        /* setup GPIO for PXA27x MMC controller */
+        pxa_gpio_mode(GPIO32_MMCCLK_MD);
+        pxa_gpio_mode(GPIO112_MMCCMD_MD);
+        pxa_gpio_mode(GPIO92_MMCDAT0_MD);
+        pxa_gpio_mode(GPIO109_MMCDAT1_MD);
+        pxa_gpio_mode(GPIO110_MMCDAT2_MD);
+        pxa_gpio_mode(GPIO111_MMCDAT3_MD);
+
+        pxa_gpio_mode(GPIO_MMC_DET | GPIO_IN);
+
+        err = request_irq(TRIZEPS4_MMC_IRQ, mci_detect_int, SA_INTERRUPT | SA_TRIGGER_RISING, "MMC card detect", data);
+        if (err) {
+                printk(KERN_ERR "trizeps4_mci_init: MMC/SD: can't request MMC card detect IRQ\n");
+                return -1;
+        }
+        return 0;
+}
+
+static void trizeps4_mci_exit(struct device *dev, void *data)
+{
+        free_irq(TRIZEPS4_MMC_IRQ, data);
+}
+
+static struct pxamci_platform_data trizeps4_mci_platform_data = {
+        .ocr_mask       = MMC_VDD_32_33|MMC_VDD_33_34,
+        .init           = trizeps4_mci_init,
+        .exit           = trizeps4_mci_exit,
+        .setpower       = board_mci_power,
+};
+
+static struct pxaficp_platform_data trizeps4_ficp_platform_data = {
+        .transceiver_cap  = IR_SIRMODE | IR_FIRMODE | IR_OFF,
+        .transceiver_mode = board_irda_mode,
+};
+
+static int trizeps4_ohci_init(struct device *dev)
+{
+        /* setup Port1 GPIO pin. */
+        pxa_gpio_mode( 88 | GPIO_ALT_FN_1_IN);  /* USBHPWR1 */
+        pxa_gpio_mode( 89 | GPIO_ALT_FN_2_OUT); /* USBHPEN1 */
+
+        /* Set the Power Control Polarity Low and Power Sense
+           Polarity Low to active low. */
+        UHCHR = (UHCHR | UHCHR_PCPL | UHCHR_PSPL) &
+                ~(UHCHR_SSEP1 | UHCHR_SSEP2 | UHCHR_SSEP3 | UHCHR_SSE);
+
+        return 0;
+}
+
+static void trizeps4_ohci_exit(struct device *dev)
+{
+        ;
+}
+
+static struct pxaohci_platform_data trizeps4_ohci_platform_data = {
+        .port_mode      = PMM_PERPORT_MODE,
+        .init           = trizeps4_ohci_init,
+        .exit           = trizeps4_ohci_exit,
+};
+
+static struct map_desc trizeps4_io_desc[] __initdata = {
+        {       /* ConXS CFSR */
+                .virtual        = TRIZEPS4_CFSR_VIRT,
+                .pfn            = __phys_to_pfn(TRIZEPS4_CFSR_PHYS),
+                .length         = 0x00001000,
+                .type           = MT_DEVICE
+        },
+        {       /* ConXS BCR */
+                .virtual        = TRIZEPS4_BOCR_VIRT,
+                .pfn            = __phys_to_pfn(TRIZEPS4_BOCR_PHYS),
+                .length         = 0x00001000,
+                .type           = MT_DEVICE
+        },
+        {       /* ConXS IRCR */
+                .virtual        = TRIZEPS4_IRCR_VIRT,
+                .pfn            = __phys_to_pfn(TRIZEPS4_IRCR_PHYS),
+                .length         = 0x00001000,
+                .type           = MT_DEVICE
+        },
+        {       /* ConXS DCR */
+                .virtual        = TRIZEPS4_DICR_VIRT,
+                .pfn            = __phys_to_pfn(TRIZEPS4_DICR_PHYS),
+                .length         = 0x00001000,
+                .type           = MT_DEVICE
+        },
+        {       /* ConXS UPSR */
+                .virtual        = TRIZEPS4_UPSR_VIRT,
+                .pfn            = __phys_to_pfn(TRIZEPS4_UPSR_PHYS),
+                .length         = 0x00001000,
+                .type           = MT_DEVICE
+        }
+};
+
+static struct pxafb_mach_info sharp_lcd __initdata = {
+    .pixclock           = 78000,
+    .xres               = 640,
+    .yres               = 480,
+    .bpp                = 8,
+    .hsync_len          = 4,
+    .left_margin        = 4,
+    .right_margin       = 4,
+    .vsync_len          = 2,
+    .upper_margin       = 0,
+    .lower_margin       = 0,
+    .sync               = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+    .cmap_greyscale     = 0,
+    .cmap_inverse       = 0,
+    .cmap_static        = 0,
+    .lccr0              = LCCR0_Color | LCCR0_Pas | LCCR0_Dual,
+    .lccr3              = 0x0340ff02,
+    .pxafb_backlight_power = board_backlight_power,
+};
+
+static void __init trizeps4_fixup(struct machine_desc *desc, struct tag *tags, char **cmdline, struct meminfo *mi)
+{
+}
+
+static void __init trizeps4_init(void)
+{
+        platform_add_devices(trizeps4_devices, ARRAY_SIZE(trizeps4_devices));
+
+        set_pxa_fb_info(&sharp_lcd);
+
+        pxa_set_mci_info(&trizeps4_mci_platform_data);
+        pxa_set_ficp_info(&trizeps4_ficp_platform_data);
+        pxa_set_ohci_info(&trizeps4_ohci_platform_data);
+}
+
+static void __init trizeps4_map_io(void)
+{
+        pxa_map_io();
+        iotable_init(trizeps4_io_desc, ARRAY_SIZE(trizeps4_io_desc));
+
+        /* for DiskOnChip */
+        pxa_gpio_mode(GPIO15_nCS_1_MD);
+
+        /* for off-module PIC on ConXS board */
+        pxa_gpio_mode(GPIO_PIC | GPIO_IN);
+
+        /* UCB1400 irq */
+        pxa_gpio_mode(GPIO_UCB1400 | GPIO_IN);
+
+        /* for DM9000 LAN */
+        pxa_gpio_mode(GPIO78_nCS_2_MD);
+        pxa_gpio_mode(GPIO_DM9000 | GPIO_IN);
+
+        /* for PCMCIA device */
+        pxa_gpio_mode(GPIO_PCD | GPIO_IN);
+        pxa_gpio_mode(GPIO_PRDY | GPIO_IN);
+
+        /* for I2C adapter */
+        pxa_gpio_mode(GPIO117_I2CSCL_MD);
+        pxa_gpio_mode(GPIO118_I2CSDA_MD);
+
+        /* MMC_DET s.o. */
+        pxa_gpio_mode(GPIO_MMC_DET | GPIO_IN);
+
+        /* whats that for ??? */
+        pxa_gpio_mode(GPIO79_nCS_3_MD);
+
+        pxa_gpio_mode( GPIO_SYS_BUSY_LED  | GPIO_OUT);          /* LED1 */
+        pxa_gpio_mode( GPIO_HEARTBEAT_LED | GPIO_OUT);          /* LED2 */
+
+#ifdef CONFIG_MACH_TRIZEPS4_CONXS
+#ifdef CONFIG_IDE_PXA_CF
+        /* if boot direct from compact flash dont disable power */
+        trizeps_conxs_bcr = 0x0009;
+#else
+        /* this is the reset value */
+        trizeps_conxs_bcr = 0x00A0;
+#endif
+        ConXS_BCR = trizeps_conxs_bcr;
+#endif
+
+        PWER  = 0x00000002;
+        PFER  = 0x00000000;
+        PRER  = 0x00000002;
+        PGSR0 = 0x0158C000;
+        PGSR1 = 0x00FF0080;
+        PGSR2 = 0x0001C004;
+        /* Stop 3.6MHz and drive HIGH to PCMCIA and CS */
+        PCFR |= PCFR_OPDE;
+}
+
+MACHINE_START(TRIZEPS4, "Keith und Koep Trizeps IV module")
+        /* MAINTAINER("Jürgen Schindele") */
+        .phys_io        = 0x40000000,
+        .io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
+        .boot_params    = TRIZEPS4_SDRAM_BASE + 0x100,
+        .fixup          = trizeps4_fixup,
+        .init_machine   = trizeps4_init,
+        .map_io         = trizeps4_map_io,
+        .init_irq       = pxa_init_irq,
+        .timer          = &pxa_timer,
+MACHINE_END
+
diff --git a/arch/arm/mach-sa1100/cpu-sa1110.c b/arch/arm/mach-sa1100/cpu-sa1110.c
index 04c94ab6c18b..639597729932 100644
--- a/arch/arm/mach-sa1100/cpu-sa1110.c
+++ b/arch/arm/mach-sa1100/cpu-sa1110.c
@@ -15,7 +15,10 @@
  *      SDRAM reads (rev A0, B0, B1)
  *
  * We ignore rev. A0 and B0 devices; I don't think they're worth supporting.
+ *
+ * The SDRAM type can be passed on the command line as cpu_sa1110.sdram=type
  */
+#include <linux/moduleparam.h>
 #include <linux/types.h>
 #include <linux/kernel.h>
 #include <linux/sched.h>
@@ -35,6 +38,7 @@
 static struct cpufreq_driver sa1110_driver;
 
 struct sdram_params {
+        const char name[16];
         u_char  rows;           /* bits                          */
         u_char  cas_latency;    /* cycles                        */
         u_char  tck;            /* clock cycle time (ns)         */
@@ -50,54 +54,53 @@ struct sdram_info {
         u_int   mdcas[3];
 };
 
-static struct sdram_params tc59sm716_cl2_params __initdata = {
-        .rows                   = 12,
-        .tck                    = 10,
-        .trcd                   = 20,
-        .trp                    = 20,
-        .twr                    = 10,
-        .refresh                = 64000,
-        .cas_latency            = 2,
-};
-
-static struct sdram_params tc59sm716_cl3_params __initdata = {
-        .rows                   = 12,
-        .tck                    = 8,
-        .trcd                   = 20,
-        .trp                    = 20,
-        .twr                    = 8,
-        .refresh                = 64000,
-        .cas_latency            = 3,
-};
-
-static struct sdram_params samsung_k4s641632d_tc75 __initdata = {
-        .rows                   = 14,
-        .tck                    = 9,
-        .trcd                   = 27,
-        .trp                    = 20,
-        .twr                    = 9,
-        .refresh                = 64000,
-        .cas_latency            = 3,
-};
-
-static struct sdram_params samsung_km416s4030ct __initdata = {
-        .rows                   = 13,
-        .tck                    = 8,
-        .trcd                   = 24,   /* 3 CLKs */
-        .trp                    = 24,   /* 3 CLKs */
-        .twr                    = 16,   /* Trdl: 2 CLKs */
-        .refresh                = 64000,
-        .cas_latency            = 3,
-};
-
-static struct sdram_params wbond_w982516ah75l_cl3_params __initdata = {
-        .rows                   = 16,
-        .tck                    = 8,
-        .trcd                   = 20,
-        .trp                    = 20,
-        .twr                    = 8,
-        .refresh                = 64000,
-        .cas_latency            = 3,
+static struct sdram_params sdram_tbl[] __initdata = {
+        {       /* Toshiba TC59SM716 CL2 */
+                .name           = "TC59SM716-CL2",
+                .rows           = 12,
+                .tck            = 10,
+                .trcd           = 20,
+                .trp            = 20,
+                .twr            = 10,
+                .refresh        = 64000,
+                .cas_latency    = 2,
+        }, {    /* Toshiba TC59SM716 CL3 */
+                .name           = "TC59SM716-CL3",
+                .rows           = 12,
+                .tck            = 8,
+                .trcd           = 20,
+                .trp            = 20,
+                .twr            = 8,
+                .refresh        = 64000,
+                .cas_latency    = 3,
+        }, {    /* Samsung K4S641632D TC75 */
+                .name           = "K4S641632D",
+                .rows           = 14,
+                .tck            = 9,
+                .trcd           = 27,
+                .trp            = 20,
+                .twr            = 9,
+                .refresh        = 64000,
+                .cas_latency    = 3,
+        }, {    /* Samsung KM416S4030CT */
+                .name           = "KM416S4030CT",
+                .rows           = 13,
+                .tck            = 8,
+                .trcd           = 24,   /* 3 CLKs */
+                .trp            = 24,   /* 3 CLKs */
+                .twr            = 16,   /* Trdl: 2 CLKs */
+                .refresh        = 64000,
+                .cas_latency    = 3,
+        }, {    /* Winbond W982516AH75L CL3 */
+                .name           = "W982516AH75L",
+                .rows           = 16,
+                .tck            = 8,
+                .trcd           = 20,
+                .trp            = 20,
+                .twr            = 8,
+                .refresh        = 64000,
+                .cas_latency    = 3,
+        },
 };
 
 static struct sdram_params sdram_params;
@@ -336,19 +339,36 @@ static struct cpufreq_driver sa1110_driver = {
         .name           = "sa1110",
 };
 
+static struct sdram_params *sa1110_find_sdram(const char *name)
+{
+        struct sdram_params *sdram;
+
+        for (sdram = sdram_tbl; sdram < sdram_tbl + ARRAY_SIZE(sdram_tbl); sdram++)
+                if (strcmp(name, sdram->name) == 0)
+                        return sdram;
+
+        return NULL;
+}
+
+static char sdram_name[16];
+
 static int __init sa1110_clk_init(void)
 {
-        struct sdram_params *sdram = NULL;
+        struct sdram_params *sdram;
+        const char *name = sdram_name;
 
-        if (machine_is_assabet())
-                sdram = &tc59sm716_cl3_params;
+        if (!name[0]) {
+                if (machine_is_assabet())
+                        name = "TC59SM716-CL3";
 
-        if (machine_is_pt_system3())
-                sdram = &samsung_k4s641632d_tc75;
+                if (machine_is_pt_system3())
+                        name = "K4S641632D";
 
-        if (machine_is_h3100())
-                sdram = &samsung_km416s4030ct;
+                if (machine_is_h3100())
+                        name = "KM416S4030CT";
+        }
 
+        sdram = sa1110_find_sdram(name);
         if (sdram) {
                 printk(KERN_DEBUG "SDRAM: tck: %d trcd: %d trp: %d"
                         " twr: %d refresh: %d cas_latency: %d\n",
@@ -363,4 +383,5 @@ static int __init sa1110_clk_init(void)
         return 0;
 }
 
+module_param_string(sdram, sdram_name, sizeof(sdram_name), 0);
 arch_initcall(sa1110_clk_init);
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index c4bca753165b..5f80f184cd32 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -121,8 +121,8 @@ config CPU_ARM925T
 # ARM926T
 config CPU_ARM926T
         bool "Support ARM926T processor"
-        depends on ARCH_INTEGRATOR || ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || MACH_REALVIEW_EB || ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412
-        default y if ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412
+        depends on ARCH_INTEGRATOR || ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || MACH_REALVIEW_EB || ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || ARCH_AT91SAM9260 || ARCH_AT91SAM9261
+        default y if ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || ARCH_AT91SAM9260 || ARCH_AT91SAM9261
         select CPU_32v5
         select CPU_ABRT_EV5TJ
         select CPU_CACHE_VIVT
diff --git a/arch/arm/mm/ioremap.c b/arch/arm/mm/ioremap.c
index 7691cfdba567..7eac87f05180 100644
--- a/arch/arm/mm/ioremap.c
+++ b/arch/arm/mm/ioremap.c
@@ -27,7 +27,16 @@
 
 #include <asm/cacheflush.h>
 #include <asm/io.h>
+#include <asm/mmu_context.h>
+#include <asm/pgalloc.h>
 #include <asm/tlbflush.h>
+#include <asm/sizes.h>
+
+/*
+ * Used by ioremap() and iounmap() code to mark (super)section-mapped
+ * I/O regions in vm_struct->flags field.
+ */
+#define VM_ARM_SECTION_MAPPING  0x80000000
 
 static inline void
 remap_area_pte(pte_t * pte, unsigned long address, unsigned long size,
@@ -113,10 +122,168 @@ remap_area_pages(unsigned long start, unsigned long pfn,
                 dir++;
         } while (address && (address < end));
 
-        flush_cache_vmap(start, end);
         return err;
 }
 
+
+void __check_kvm_seq(struct mm_struct *mm)
+{
+        unsigned int seq;
+
+        do {
+                seq = init_mm.context.kvm_seq;
+                memcpy(pgd_offset(mm, VMALLOC_START),
+                       pgd_offset_k(VMALLOC_START),
+                       sizeof(pgd_t) * (pgd_index(VMALLOC_END) -
+                                        pgd_index(VMALLOC_START)));
+                mm->context.kvm_seq = seq;
+        } while (seq != init_mm.context.kvm_seq);
+}
+
+#ifndef CONFIG_SMP
+/*
+ * Section support is unsafe on SMP - If you iounmap and ioremap a region,
+ * the other CPUs will not see this change until their next context switch.
+ * Meanwhile, (eg) if an interrupt comes in on one of those other CPUs
+ * which requires the new ioremap'd region to be referenced, the CPU will
+ * reference the _old_ region.
+ *
+ * Note that get_vm_area() allocates a guard 4K page, so we need to mask
+ * the size back to 1MB aligned or we will overflow in the loop below.
+ */
+static void unmap_area_sections(unsigned long virt, unsigned long size)
+{
+        unsigned long addr = virt, end = virt + (size & ~SZ_1M);
+        pgd_t *pgd;
+
+        flush_cache_vunmap(addr, end);
+        pgd = pgd_offset_k(addr);
+        do {
+                pmd_t pmd, *pmdp = pmd_offset(pgd, addr);
+
+                pmd = *pmdp;
+                if (!pmd_none(pmd)) {
+                        /*
+                         * Clear the PMD from the page table, and
+                         * increment the kvm sequence so others
+                         * notice this change.
+                         *
+                         * Note: this is still racy on SMP machines.
+                         */
+                        pmd_clear(pmdp);
+                        init_mm.context.kvm_seq++;
+
+                        /*
+                         * Free the page table, if there was one.
+                         */
+                        if ((pmd_val(pmd) & PMD_TYPE_MASK) == PMD_TYPE_TABLE)
+                                pte_free_kernel(pmd_page_kernel(pmd));
+                }
+
+                addr += PGDIR_SIZE;
+                pgd++;
+        } while (addr < end);
+
+        /*
+         * Ensure that the active_mm is up to date - we want to
+         * catch any use-after-iounmap cases.
+         */
+        if (current->active_mm->context.kvm_seq != init_mm.context.kvm_seq)
+                __check_kvm_seq(current->active_mm);
+
+        flush_tlb_kernel_range(virt, end);
+}
+
+static int
+remap_area_sections(unsigned long virt, unsigned long pfn,
+                    unsigned long size, unsigned long flags)
+{
+        unsigned long prot, addr = virt, end = virt + size;
+        pgd_t *pgd;
+
+        /*
+         * Remove and free any PTE-based mapping, and
+         * sync the current kernel mapping.
+         */
+        unmap_area_sections(virt, size);
+
+        prot = PMD_TYPE_SECT | PMD_SECT_AP_WRITE | PMD_DOMAIN(DOMAIN_IO) |
+               (flags & (L_PTE_CACHEABLE | L_PTE_BUFFERABLE));
+
+        /*
+         * ARMv6 and above need XN set to prevent speculative prefetches
+         * hitting IO.
+         */
+        if (cpu_architecture() >= CPU_ARCH_ARMv6)
+                prot |= PMD_SECT_XN;
+
+        pgd = pgd_offset_k(addr);
+        do {
+                pmd_t *pmd = pmd_offset(pgd, addr);
+
+                pmd[0] = __pmd(__pfn_to_phys(pfn) | prot);
+                pfn += SZ_1M >> PAGE_SHIFT;
+                pmd[1] = __pmd(__pfn_to_phys(pfn) | prot);
+                pfn += SZ_1M >> PAGE_SHIFT;
+                flush_pmd_entry(pmd);
+
+                addr += PGDIR_SIZE;
+                pgd++;
+        } while (addr < end);
+
+        return 0;
+}
+
+static int
+remap_area_supersections(unsigned long virt, unsigned long pfn,
+                         unsigned long size, unsigned long flags)
+{
+        unsigned long prot, addr = virt, end = virt + size;
+        pgd_t *pgd;
+
+        /*
+         * Remove and free any PTE-based mapping, and
+         * sync the current kernel mapping.
+         */
+        unmap_area_sections(virt, size);
+
+        prot = PMD_TYPE_SECT | PMD_SECT_SUPER | PMD_SECT_AP_WRITE |
+                        PMD_DOMAIN(DOMAIN_IO) |
+                        (flags & (L_PTE_CACHEABLE | L_PTE_BUFFERABLE));
+
+        /*
+         * ARMv6 and above need XN set to prevent speculative prefetches
+         * hitting IO.
+         */
+        if (cpu_architecture() >= CPU_ARCH_ARMv6)
+                prot |= PMD_SECT_XN;
+
+        pgd = pgd_offset_k(virt);
+        do {
+                unsigned long super_pmd_val, i;
+
+                super_pmd_val = __pfn_to_phys(pfn) | prot;
+                super_pmd_val |= ((pfn >> (32 - PAGE_SHIFT)) & 0xf) << 20;
+
+                for (i = 0; i < 8; i++) {
+                        pmd_t *pmd = pmd_offset(pgd, addr);
+
+                        pmd[0] = __pmd(super_pmd_val);
+                        pmd[1] = __pmd(super_pmd_val);
+                        flush_pmd_entry(pmd);
+
+                        addr += PGDIR_SIZE;
+                        pgd++;
+                }
+
+                pfn += SUPERSECTION_SIZE >> PAGE_SHIFT;
+        } while (addr < end);
+
+        return 0;
+}
+#endif
+
+
 /*
  * Remap an arbitrary physical address space into the kernel virtual
  * address space. Needed when the kernel wants to access high addresses
@@ -133,18 +300,42 @@ void __iomem *
 __ioremap_pfn(unsigned long pfn, unsigned long offset, size_t size,
               unsigned long flags)
 {
+        int err;
         unsigned long addr;
         struct vm_struct * area;
+        unsigned int cr = get_cr();
+
+        /*
+         * High mappings must be supersection aligned
+         */
+        if (pfn >= 0x100000 && (__pfn_to_phys(pfn) & ~SUPERSECTION_MASK))
+                return NULL;
 
         area = get_vm_area(size, VM_IOREMAP);
         if (!area)
                 return NULL;
         addr = (unsigned long)area->addr;
-        if (remap_area_pages(addr, pfn, size, flags)) {
+
+#ifndef CONFIG_SMP
+        if ((((cpu_architecture() >= CPU_ARCH_ARMv6) && (cr & CR_XP)) ||
+               cpu_is_xsc3()) &&
+               !((__pfn_to_phys(pfn) | size | addr) & ~SUPERSECTION_MASK)) {
+                area->flags |= VM_ARM_SECTION_MAPPING;
+                err = remap_area_supersections(addr, pfn, size, flags);
+        } else if (!((__pfn_to_phys(pfn) | size | addr) & ~PMD_MASK)) {
+                area->flags |= VM_ARM_SECTION_MAPPING;
+                err = remap_area_sections(addr, pfn, size, flags);
+        } else
+#endif
+                err = remap_area_pages(addr, pfn, size, flags);
+
+        if (err) {
                 vunmap((void *)addr);
                 return NULL;
         }
-        return (void __iomem *) (offset + (char *)addr);
+
+        flush_cache_vmap(addr, addr + size);
+        return (void __iomem *) (offset + addr);
 }
 EXPORT_SYMBOL(__ioremap_pfn);
 
@@ -173,6 +364,34 @@ EXPORT_SYMBOL(__ioremap);
 
 void __iounmap(void __iomem *addr)
 {
-        vunmap((void *)(PAGE_MASK & (unsigned long)addr));
+        struct vm_struct **p, *tmp;
+        unsigned int section_mapping = 0;
+
+        addr = (void __iomem *)(PAGE_MASK & (unsigned long)addr);
+
+        /*
+         * If this is a section based mapping we need to handle it
+         * specially as the VM subysystem does not know how to handle
+         * such a beast. We need the lock here b/c we need to clear
+         * all the mappings before the area can be reclaimed
+         * by someone else.
+         */
+        write_lock(&vmlist_lock);
+        for (p = &vmlist ; (tmp = *p) ; p = &tmp->next) {
+                if((tmp->flags & VM_IOREMAP) && (tmp->addr == addr)) {
+                        if (tmp->flags & VM_ARM_SECTION_MAPPING) {
+                                *p = tmp->next;
+                                unmap_area_sections((unsigned long)tmp->addr,
+                                                    tmp->size);
+                                kfree(tmp);
+                                section_mapping = 1;
+                        }
+                        break;
+                }
+        }
+        write_unlock(&vmlist_lock);
+
+        if (!section_mapping)
+                vunmap(addr);
 }
 EXPORT_SYMBOL(__iounmap);
diff --git a/arch/arm/mm/mm-armv.c b/arch/arm/mm/mm-armv.c
index 95273de4f772..d06440cc4e8f 100644
--- a/arch/arm/mm/mm-armv.c
+++ b/arch/arm/mm/mm-armv.c
@@ -303,16 +303,16 @@ static struct mem_types mem_types[] __initdata = {
                 .prot_pte  = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY |
                                 L_PTE_WRITE,
                 .prot_l1   = PMD_TYPE_TABLE,
-                .prot_sect = PMD_TYPE_SECT | PMD_SECT_UNCACHED |
+                .prot_sect = PMD_TYPE_SECT | PMD_BIT4 | PMD_SECT_UNCACHED |
                                 PMD_SECT_AP_WRITE,
                 .domain    = DOMAIN_IO,
         },
         [MT_CACHECLEAN] = {
-                .prot_sect = PMD_TYPE_SECT,
+                .prot_sect = PMD_TYPE_SECT | PMD_BIT4,
                 .domain    = DOMAIN_KERNEL,
         },
         [MT_MINICLEAN] = {
-                .prot_sect = PMD_TYPE_SECT | PMD_SECT_MINICACHE,
+                .prot_sect = PMD_TYPE_SECT | PMD_BIT4 | PMD_SECT_MINICACHE,
                 .domain    = DOMAIN_KERNEL,
         },
         [MT_LOW_VECTORS] = {
@@ -328,25 +328,25 @@ static struct mem_types mem_types[] __initdata = {
                 .domain    = DOMAIN_USER,
         },
         [MT_MEMORY] = {
-                .prot_sect = PMD_TYPE_SECT | PMD_SECT_AP_WRITE,
+                .prot_sect = PMD_TYPE_SECT | PMD_BIT4 | PMD_SECT_AP_WRITE,
                 .domain    = DOMAIN_KERNEL,
         },
         [MT_ROM] = {
-                .prot_sect = PMD_TYPE_SECT,
+                .prot_sect = PMD_TYPE_SECT | PMD_BIT4,
                 .domain    = DOMAIN_KERNEL,
         },
         [MT_IXP2000_DEVICE] = { /* IXP2400 requires XCB=101 for on-chip I/O */
                 .prot_pte  = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY |
                                 L_PTE_WRITE,
                 .prot_l1   = PMD_TYPE_TABLE,
-                .prot_sect = PMD_TYPE_SECT | PMD_SECT_UNCACHED |
+                .prot_sect = PMD_TYPE_SECT | PMD_BIT4 | PMD_SECT_UNCACHED |
                                 PMD_SECT_AP_WRITE | PMD_SECT_BUFFERABLE |
                                 PMD_SECT_TEX(1),
                 .domain    = DOMAIN_IO,
         },
         [MT_NONSHARED_DEVICE] = {
                 .prot_l1   = PMD_TYPE_TABLE,
-                .prot_sect = PMD_TYPE_SECT | PMD_SECT_NONSHARED_DEV |
+                .prot_sect = PMD_TYPE_SECT | PMD_BIT4 | PMD_SECT_NONSHARED_DEV |
                                 PMD_SECT_AP_WRITE,
                 .domain    = DOMAIN_IO,
         }
@@ -376,14 +376,21 @@ void __init build_mem_type_table(void)
                 ecc_mask = 0;
         }
 
-        if (cpu_arch <= CPU_ARCH_ARMv5TEJ && !cpu_is_xscale()) {
-                for (i = 0; i < ARRAY_SIZE(mem_types); i++) {
+        /*
+         * Xscale must not have PMD bit 4 set for section mappings.
+         */
+        if (cpu_is_xscale())
+                for (i = 0; i < ARRAY_SIZE(mem_types); i++)
+                        mem_types[i].prot_sect &= ~PMD_BIT4;
+
+        /*
+         * ARMv5 and lower, excluding Xscale, bit 4 must be set for
+         * page tables.
+         */
+        if (cpu_arch < CPU_ARCH_ARMv6 && !cpu_is_xscale())
+                for (i = 0; i < ARRAY_SIZE(mem_types); i++)
                         if (mem_types[i].prot_l1)
                                 mem_types[i].prot_l1 |= PMD_BIT4;
-                        if (mem_types[i].prot_sect)
-                                mem_types[i].prot_sect |= PMD_BIT4;
-                }
-        }
 
         cp = &cache_policies[cachepolicy];
         kern_pgprot = user_pgprot = cp->pte;
@@ -407,8 +414,8 @@ void __init build_mem_type_table(void)
                  * bit 4 becomes XN which we must clear for the
                  * kernel memory mapping.
                  */
-                mem_types[MT_MEMORY].prot_sect &= ~PMD_BIT4;
-                mem_types[MT_ROM].prot_sect &= ~PMD_BIT4;
+                mem_types[MT_MEMORY].prot_sect &= ~PMD_SECT_XN;
+                mem_types[MT_ROM].prot_sect &= ~PMD_SECT_XN;
 
                 /*
                  * Mark cache clean areas and XIP ROM read only
diff --git a/arch/arm/mm/proc-arm1020.S b/arch/arm/mm/proc-arm1020.S
index a1b85d9ae48e..6c731a4f70c9 100644
--- a/arch/arm/mm/proc-arm1020.S
+++ b/arch/arm/mm/proc-arm1020.S
@@ -525,6 +525,9 @@ __arm1020_proc_info:
         .long   PMD_TYPE_SECT | \
                 PMD_SECT_AP_WRITE | \
                 PMD_SECT_AP_READ
+        .long   PMD_TYPE_SECT | \
+                PMD_SECT_AP_WRITE | \
+                PMD_SECT_AP_READ
         b       __arm1020_setup
         .long   cpu_arch_name
         .long   cpu_elf_name
diff --git a/arch/arm/mm/proc-arm1020e.S b/arch/arm/mm/proc-arm1020e.S
index 6130930a800a..269f485d092d 100644
--- a/arch/arm/mm/proc-arm1020e.S
+++ b/arch/arm/mm/proc-arm1020e.S
@@ -489,6 +489,10 @@ __arm1020e_proc_info:
                 PMD_BIT4 | \
                 PMD_SECT_AP_WRITE | \
                 PMD_SECT_AP_READ
+        .long   PMD_TYPE_SECT | \
+                PMD_BIT4 | \
+                PMD_SECT_AP_WRITE | \
+                PMD_SECT_AP_READ
         b       __arm1020e_setup
         .long   cpu_arch_name
         .long   cpu_elf_name
diff --git a/arch/arm/mm/proc-arm1022.S b/arch/arm/mm/proc-arm1022.S
index e435974062f6..0643bd464969 100644
--- a/arch/arm/mm/proc-arm1022.S
+++ b/arch/arm/mm/proc-arm1022.S
@@ -472,6 +472,10 @@ __arm1022_proc_info:
                 PMD_BIT4 | \
                 PMD_SECT_AP_WRITE | \
                 PMD_SECT_AP_READ
+        .long   PMD_TYPE_SECT | \
+                PMD_BIT4 | \
+                PMD_SECT_AP_WRITE | \
+                PMD_SECT_AP_READ
         b       __arm1022_setup
         .long   cpu_arch_name
         .long   cpu_elf_name
diff --git a/arch/arm/mm/proc-arm1026.S b/arch/arm/mm/proc-arm1026.S
index 85d8fb0f25b5..0668bfbac67b 100644
--- a/arch/arm/mm/proc-arm1026.S
+++ b/arch/arm/mm/proc-arm1026.S
@@ -468,6 +468,10 @@ __arm1026_proc_info:
                 PMD_BIT4 | \
                 PMD_SECT_AP_WRITE | \
                 PMD_SECT_AP_READ
+        .long   PMD_TYPE_SECT | \
+                PMD_BIT4 | \
+                PMD_SECT_AP_WRITE | \
+                PMD_SECT_AP_READ
         b       __arm1026_setup
         .long   cpu_arch_name
         .long   cpu_elf_name
diff --git a/arch/arm/mm/proc-arm6_7.S b/arch/arm/mm/proc-arm6_7.S
index 7a705edfa4b2..0432e4806888 100644
--- a/arch/arm/mm/proc-arm6_7.S
+++ b/arch/arm/mm/proc-arm6_7.S
@@ -355,6 +355,10 @@ __arm6_proc_info:
                 .long   0x41560600
                 .long   0xfffffff0
                 .long   0x00000c1e
+                .long   PMD_TYPE_SECT | \
+                        PMD_BIT4 | \
+                        PMD_SECT_AP_WRITE | \
+                        PMD_SECT_AP_READ
                 b       __arm6_setup
                 .long   cpu_arch_name
                 .long   cpu_elf_name
@@ -371,6 +375,10 @@ __arm610_proc_info:
                 .long   0x41560610
                 .long   0xfffffff0
                 .long   0x00000c1e
+                .long   PMD_TYPE_SECT | \
+                        PMD_BIT4 | \
+                        PMD_SECT_AP_WRITE | \
+                        PMD_SECT_AP_READ
                 b       __arm6_setup
                 .long   cpu_arch_name
                 .long   cpu_elf_name
@@ -387,6 +395,10 @@ __arm7_proc_info:
                 .long   0x41007000
                 .long   0xffffff00
                 .long   0x00000c1e
+                .long   PMD_TYPE_SECT | \
+                        PMD_BIT4 | \
+                        PMD_SECT_AP_WRITE | \
+                        PMD_SECT_AP_READ
                 b       __arm7_setup
                 .long   cpu_arch_name
                 .long   cpu_elf_name
@@ -408,6 +420,10 @@ __arm710_proc_info:
                         PMD_BIT4 | \
                         PMD_SECT_AP_WRITE | \
                         PMD_SECT_AP_READ
+                .long   PMD_TYPE_SECT | \
+                        PMD_BIT4 | \
+                        PMD_SECT_AP_WRITE | \
+                        PMD_SECT_AP_READ
                 b       __arm7_setup
                 .long   cpu_arch_name
                 .long   cpu_elf_name
diff --git a/arch/arm/mm/proc-arm720.S b/arch/arm/mm/proc-arm720.S
index b22bc3af232e..0e6946ab6e5b 100644
--- a/arch/arm/mm/proc-arm720.S
+++ b/arch/arm/mm/proc-arm720.S
@@ -243,6 +243,10 @@ __arm710_proc_info:
                         PMD_BIT4 | \
                         PMD_SECT_AP_WRITE | \
                         PMD_SECT_AP_READ
+                .long   PMD_TYPE_SECT | \
+                        PMD_BIT4 | \
+                        PMD_SECT_AP_WRITE | \
+                        PMD_SECT_AP_READ
                 b       __arm710_setup                          @ cpu_flush
                 .long   cpu_arch_name                           @ arch_name
                 .long   cpu_elf_name                            @ elf_name
@@ -264,6 +268,10 @@ __arm720_proc_info:
                         PMD_BIT4 | \
                         PMD_SECT_AP_WRITE | \
                         PMD_SECT_AP_READ
+                .long   PMD_TYPE_SECT | \
+                        PMD_BIT4 | \
+                        PMD_SECT_AP_WRITE | \
+                        PMD_SECT_AP_READ
                 b       __arm720_setup                          @ cpu_flush
                 .long   cpu_arch_name                           @ arch_name
                 .long   cpu_elf_name                            @ elf_name
diff --git a/arch/arm/mm/proc-arm920.S b/arch/arm/mm/proc-arm920.S
index e647c3ae1351..45292f46c3b2 100644
--- a/arch/arm/mm/proc-arm920.S
+++ b/arch/arm/mm/proc-arm920.S
@@ -458,6 +458,10 @@ __arm920_proc_info:
                 PMD_BIT4 | \
                 PMD_SECT_AP_WRITE | \
                 PMD_SECT_AP_READ
+        .long   PMD_TYPE_SECT | \
+                PMD_BIT4 | \
+                PMD_SECT_AP_WRITE | \
+                PMD_SECT_AP_READ
         b       __arm920_setup
         .long   cpu_arch_name
         .long   cpu_elf_name
diff --git a/arch/arm/mm/proc-arm922.S b/arch/arm/mm/proc-arm922.S
index 0d237693d0a4..3c57519494d7 100644
--- a/arch/arm/mm/proc-arm922.S
+++ b/arch/arm/mm/proc-arm922.S
@@ -462,6 +462,10 @@ __arm922_proc_info:
                 PMD_BIT4 | \
                 PMD_SECT_AP_WRITE | \
                 PMD_SECT_AP_READ
+        .long   PMD_TYPE_SECT | \
+                PMD_BIT4 | \
+                PMD_SECT_AP_WRITE | \
+                PMD_SECT_AP_READ
         b       __arm922_setup
         .long   cpu_arch_name
         .long   cpu_elf_name
diff --git a/arch/arm/mm/proc-arm925.S b/arch/arm/mm/proc-arm925.S
index 07f2a888c93c..66d5a32ba0f5 100644
--- a/arch/arm/mm/proc-arm925.S
+++ b/arch/arm/mm/proc-arm925.S
@@ -522,6 +522,10 @@ __arm925_proc_info:
                 PMD_BIT4 | \
                 PMD_SECT_AP_WRITE | \
                 PMD_SECT_AP_READ
+        .long   PMD_TYPE_SECT | \
+                PMD_BIT4 | \
+                PMD_SECT_AP_WRITE | \
+                PMD_SECT_AP_READ
         b       __arm925_setup
         .long   cpu_arch_name
         .long   cpu_elf_name
@@ -541,6 +545,10 @@ __arm915_proc_info:
                 PMD_BIT4 | \
                 PMD_SECT_AP_WRITE | \
                 PMD_SECT_AP_READ
+        .long   PMD_TYPE_SECT | \
+                PMD_BIT4 | \
+                PMD_SECT_AP_WRITE | \
+                PMD_SECT_AP_READ
         b       __arm925_setup
         .long   cpu_arch_name
         .long   cpu_elf_name
diff --git a/arch/arm/mm/proc-arm926.S b/arch/arm/mm/proc-arm926.S
index 77e58375778c..189820e25184 100644
--- a/arch/arm/mm/proc-arm926.S
+++ b/arch/arm/mm/proc-arm926.S
@@ -474,6 +474,10 @@ __arm926_proc_info:
                 PMD_BIT4 | \
                 PMD_SECT_AP_WRITE | \
                 PMD_SECT_AP_READ
+        .long   PMD_TYPE_SECT | \
+                PMD_BIT4 | \
+                PMD_SECT_AP_WRITE | \
+                PMD_SECT_AP_READ
         b       __arm926_setup
         .long   cpu_arch_name
         .long   cpu_elf_name
diff --git a/arch/arm/mm/proc-sa110.S b/arch/arm/mm/proc-sa110.S
index eeacf601d6e8..e812246277cf 100644
--- a/arch/arm/mm/proc-sa110.S
+++ b/arch/arm/mm/proc-sa110.S
@@ -253,6 +253,9 @@ __sa110_proc_info:
                 PMD_SECT_CACHEABLE | \
                 PMD_SECT_AP_WRITE | \
                 PMD_SECT_AP_READ
+        .long   PMD_TYPE_SECT | \
+                PMD_SECT_AP_WRITE | \
+                PMD_SECT_AP_READ
         b       __sa110_setup
         .long   cpu_arch_name
         .long   cpu_elf_name
diff --git a/arch/arm/mm/proc-sa1100.S b/arch/arm/mm/proc-sa1100.S
index b43696c565fc..ba32cc6296a0 100644
--- a/arch/arm/mm/proc-sa1100.S
+++ b/arch/arm/mm/proc-sa1100.S
@@ -273,6 +273,9 @@ __sa1100_proc_info:
                 PMD_SECT_CACHEABLE | \
                 PMD_SECT_AP_WRITE | \
                 PMD_SECT_AP_READ
+        .long   PMD_TYPE_SECT | \
+                PMD_SECT_AP_WRITE | \
+                PMD_SECT_AP_READ
         b       __sa1100_setup
         .long   cpu_arch_name
         .long   cpu_elf_name
@@ -293,6 +296,9 @@ __sa1110_proc_info:
                 PMD_SECT_CACHEABLE | \
                 PMD_SECT_AP_WRITE | \
                 PMD_SECT_AP_READ
+        .long   PMD_TYPE_SECT | \
+                PMD_SECT_AP_WRITE | \
+                PMD_SECT_AP_READ
         b       __sa1100_setup
         .long   cpu_arch_name
         .long   cpu_elf_name
diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S
index f0075f1b1fc1..6f72549f8843 100644
--- a/arch/arm/mm/proc-v6.S
+++ b/arch/arm/mm/proc-v6.S
@@ -266,6 +266,10 @@ __v6_proc_info:
                 PMD_SECT_CACHEABLE | \
                 PMD_SECT_AP_WRITE | \
                 PMD_SECT_AP_READ
+        .long   PMD_TYPE_SECT | \
+                PMD_SECT_XN | \
+                PMD_SECT_AP_WRITE | \
+                PMD_SECT_AP_READ
         b       __v6_setup
         .long   cpu_arch_name
         .long   cpu_elf_name
diff --git a/arch/arm/mm/proc-xsc3.S b/arch/arm/mm/proc-xsc3.S
index 2303790dc3ff..4ace2d8090c7 100644
--- a/arch/arm/mm/proc-xsc3.S
+++ b/arch/arm/mm/proc-xsc3.S
@@ -490,7 +490,14 @@ cpu_xsc3_name:
 __xsc3_proc_info:
         .long   0x69056000
         .long   0xffffe000
-        .long   0x00000c0e
+        .long   PMD_TYPE_SECT | \
+                PMD_SECT_BUFFERABLE | \
+                PMD_SECT_CACHEABLE | \
+                PMD_SECT_AP_WRITE | \
+                PMD_SECT_AP_READ
+        .long   PMD_TYPE_SECT | \
+                PMD_SECT_AP_WRITE | \
+                PMD_SECT_AP_READ
         b       __xsc3_setup
         .long   cpu_arch_name
         .long   cpu_elf_name
diff --git a/arch/arm/mm/proc-xscale.S b/arch/arm/mm/proc-xscale.S
index 1ad0c880c80c..535395e25a8a 100644
--- a/arch/arm/mm/proc-xscale.S
+++ b/arch/arm/mm/proc-xscale.S
@@ -593,6 +593,9 @@ __80200_proc_info:
                 PMD_SECT_CACHEABLE | \
                 PMD_SECT_AP_WRITE | \
                 PMD_SECT_AP_READ
+        .long   PMD_TYPE_SECT | \
+                PMD_SECT_AP_WRITE | \
+                PMD_SECT_AP_READ
         b       __xscale_setup
         .long   cpu_arch_name
         .long   cpu_elf_name
@@ -613,6 +616,9 @@ __8032x_proc_info:
                 PMD_SECT_CACHEABLE | \
                 PMD_SECT_AP_WRITE | \
                 PMD_SECT_AP_READ
+        .long   PMD_TYPE_SECT | \
+                PMD_SECT_AP_WRITE | \
+                PMD_SECT_AP_READ
         b       __xscale_setup
         .long   cpu_arch_name
         .long   cpu_elf_name
@@ -633,6 +639,9 @@ __8033x_proc_info:
                 PMD_SECT_CACHEABLE | \
                 PMD_SECT_AP_WRITE | \
                 PMD_SECT_AP_READ
+        .long   PMD_TYPE_SECT | \
+                PMD_SECT_AP_WRITE | \
+                PMD_SECT_AP_READ
         b       __xscale_setup
         .long   cpu_arch_name
         .long   cpu_elf_name
@@ -653,6 +662,9 @@ __pxa250_proc_info:
                 PMD_SECT_CACHEABLE | \
                 PMD_SECT_AP_WRITE | \
                 PMD_SECT_AP_READ
+        .long   PMD_TYPE_SECT | \
+                PMD_SECT_AP_WRITE | \
+                PMD_SECT_AP_READ
         b       __xscale_setup
         .long   cpu_arch_name
         .long   cpu_elf_name
@@ -673,6 +685,9 @@ __pxa210_proc_info:
                 PMD_SECT_CACHEABLE | \
                 PMD_SECT_AP_WRITE | \
                 PMD_SECT_AP_READ
+        .long   PMD_TYPE_SECT | \
+                PMD_SECT_AP_WRITE | \
+                PMD_SECT_AP_READ
         b       __xscale_setup
         .long   cpu_arch_name
         .long   cpu_elf_name
@@ -693,6 +708,9 @@ __ixp2400_proc_info:
                 PMD_SECT_CACHEABLE | \
                 PMD_SECT_AP_WRITE | \
                 PMD_SECT_AP_READ
+        .long   PMD_TYPE_SECT | \
+                PMD_SECT_AP_WRITE | \
+                PMD_SECT_AP_READ
         b       __xscale_setup
         .long   cpu_arch_name
         .long   cpu_elf_name
@@ -713,6 +731,9 @@ __ixp2800_proc_info:
                 PMD_SECT_CACHEABLE | \
                 PMD_SECT_AP_WRITE | \
                 PMD_SECT_AP_READ
+        .long   PMD_TYPE_SECT | \
+                PMD_SECT_AP_WRITE | \
+                PMD_SECT_AP_READ
         b       __xscale_setup
         .long   cpu_arch_name
         .long   cpu_elf_name
@@ -733,6 +754,9 @@ __ixp42x_proc_info:
                 PMD_SECT_CACHEABLE | \
                 PMD_SECT_AP_WRITE | \
                 PMD_SECT_AP_READ
+        .long   PMD_TYPE_SECT | \
+                PMD_SECT_AP_WRITE | \
+                PMD_SECT_AP_READ
         b       __xscale_setup
         .long   cpu_arch_name
         .long   cpu_elf_name
@@ -748,7 +772,14 @@ __ixp42x_proc_info:
 __ixp46x_proc_info:
         .long   0x69054200
         .long   0xffffff00
-        .long   0x00000c0e
+        .long   PMD_TYPE_SECT | \
+                PMD_SECT_BUFFERABLE | \
+                PMD_SECT_CACHEABLE | \
+                PMD_SECT_AP_WRITE | \
+                PMD_SECT_AP_READ
+        .long   PMD_TYPE_SECT | \
+                PMD_SECT_AP_WRITE | \
+                PMD_SECT_AP_READ
         b       __xscale_setup
         .long   cpu_arch_name
         .long   cpu_elf_name
@@ -769,6 +800,9 @@ __pxa255_proc_info:
                 PMD_SECT_CACHEABLE | \
                 PMD_SECT_AP_WRITE | \
                 PMD_SECT_AP_READ
+        .long   PMD_TYPE_SECT | \
+                PMD_SECT_AP_WRITE | \
+                PMD_SECT_AP_READ
         b       __xscale_setup
         .long   cpu_arch_name
         .long   cpu_elf_name
@@ -789,6 +823,9 @@ __pxa270_proc_info:
                 PMD_SECT_CACHEABLE | \
                 PMD_SECT_AP_WRITE | \
                 PMD_SECT_AP_READ
+        .long   PMD_TYPE_SECT | \
+                PMD_SECT_AP_WRITE | \
+                PMD_SECT_AP_READ
         b       __xscale_setup
         .long   cpu_arch_name
         .long   cpu_elf_name
diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig
index ec49495e651e..ec752e16d618 100644
--- a/arch/arm/plat-omap/Kconfig
+++ b/arch/arm/plat-omap/Kconfig
@@ -91,7 +91,7 @@ config OMAP_32K_TIMER_HZ
 
 config OMAP_DM_TIMER
         bool "Use dual-mode timer"
-        depends on ARCH_OMAP16XX
+        depends on ARCH_OMAP16XX || ARCH_OMAP24XX
         help
          Select this option if you want to use OMAP Dual-Mode timers.
 
diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c
index 32ec04c58bcd..dcd9d81201fa 100644
--- a/arch/arm/plat-omap/clock.c
+++ b/arch/arm/plat-omap/clock.c
@@ -28,9 +28,9 @@
 
 #include <asm/arch/clock.h>
 
-LIST_HEAD(clocks);
+static LIST_HEAD(clocks);
 static DEFINE_MUTEX(clocks_mutex);
-DEFINE_SPINLOCK(clockfw_lock);
+static DEFINE_SPINLOCK(clockfw_lock);
 
 static struct clk_functions *arch_clock;
 
diff --git a/arch/arm/plat-omap/cpu-omap.c b/arch/arm/plat-omap/cpu-omap.c
index 98edc9fdd6d1..a0c71dca2373 100644
--- a/arch/arm/plat-omap/cpu-omap.c
+++ b/arch/arm/plat-omap/cpu-omap.c
@@ -25,6 +25,14 @@
 #include <asm/io.h>
 #include <asm/system.h>
 
+#define VERY_HI_RATE    900000000
+
+#ifdef CONFIG_ARCH_OMAP1
+#define MPU_CLK         "mpu"
+#else
+#define MPU_CLK         "virt_prcm_set"
+#endif
+
 /* TODO: Add support for SDRAM timing changes */
 
 int omap_verify_speed(struct cpufreq_policy *policy)
@@ -36,7 +44,7 @@ int omap_verify_speed(struct cpufreq_policy *policy)
 
         cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq,
                                      policy->cpuinfo.max_freq);
-        mpu_clk = clk_get(NULL, "mpu");
+        mpu_clk = clk_get(NULL, MPU_CLK);
         if (IS_ERR(mpu_clk))
                 return PTR_ERR(mpu_clk);
         policy->min = clk_round_rate(mpu_clk, policy->min * 1000) / 1000;
@@ -56,7 +64,7 @@ unsigned int omap_getspeed(unsigned int cpu)
         if (cpu)
                 return 0;
 
-        mpu_clk = clk_get(NULL, "mpu");
+        mpu_clk = clk_get(NULL, MPU_CLK);
         if (IS_ERR(mpu_clk))
                 return 0;
         rate = clk_get_rate(mpu_clk) / 1000;
@@ -73,7 +81,7 @@ static int omap_target(struct cpufreq_policy *policy,
         struct cpufreq_freqs freqs;
         int ret = 0;
 
-        mpu_clk = clk_get(NULL, "mpu");
+        mpu_clk = clk_get(NULL, MPU_CLK);
         if (IS_ERR(mpu_clk))
                 return PTR_ERR(mpu_clk);
 
@@ -93,7 +101,7 @@ static int __init omap_cpu_init(struct cpufreq_policy *policy)
 {
         struct clk * mpu_clk;
 
-        mpu_clk = clk_get(NULL, "mpu");
+        mpu_clk = clk_get(NULL, MPU_CLK);
         if (IS_ERR(mpu_clk))
                 return PTR_ERR(mpu_clk);
 
@@ -102,7 +110,7 @@ static int __init omap_cpu_init(struct cpufreq_policy *policy)
         policy->cur = policy->min = policy->max = omap_getspeed(0);
         policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
         policy->cpuinfo.min_freq = clk_round_rate(mpu_clk, 0) / 1000;
-        policy->cpuinfo.max_freq = clk_round_rate(mpu_clk, 216000000) / 1000;
+        policy->cpuinfo.max_freq = clk_round_rate(mpu_clk, VERY_HI_RATE) / 1000;
         policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL;
         clk_put(mpu_clk);
 
diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c
index 5d5d6eb222dd..8bff56673831 100644
--- a/arch/arm/plat-omap/devices.c
+++ b/arch/arm/plat-omap/devices.c
@@ -105,7 +105,7 @@ static void omap_init_kp(void)
                 omap_cfg_reg(E20_1610_KBR3);
                 omap_cfg_reg(E19_1610_KBR4);
                 omap_cfg_reg(N19_1610_KBR5);
-        } else if (machine_is_omap_perseus2()) {
+        } else if (machine_is_omap_perseus2() || machine_is_omap_fsample()) {
                 omap_cfg_reg(E2_730_KBR0);
                 omap_cfg_reg(J7_730_KBR1);
                 omap_cfg_reg(E1_730_KBR2);
@@ -162,8 +162,8 @@ static u64 mmc1_dmamask = 0xffffffff;
 
 static struct resource mmc1_resources[] = {
         {
-                .start          = IO_ADDRESS(OMAP_MMC1_BASE),
-                .end            = IO_ADDRESS(OMAP_MMC1_BASE) + 0x7f,
+                .start          = OMAP_MMC1_BASE,
+                .end            = OMAP_MMC1_BASE + 0x7f,
                 .flags          = IORESOURCE_MEM,
         },
         {
@@ -191,8 +191,8 @@ static u64 mmc2_dmamask = 0xffffffff;
 
 static struct resource mmc2_resources[] = {
         {
-                .start          = IO_ADDRESS(OMAP_MMC2_BASE),
-                .end            = IO_ADDRESS(OMAP_MMC2_BASE) + 0x7f,
+                .start          = OMAP_MMC2_BASE,
+                .end            = OMAP_MMC2_BASE + 0x7f,
                 .flags          = IORESOURCE_MEM,
         },
         {
diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index 5dac4230360d..c5d0214ef191 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -43,6 +43,7 @@
 
 #define OMAP_DMA_ACTIVE         0x01
 #define OMAP_DMA_CCR_EN         (1 << 7)
+#define OMAP2_DMA_CSR_CLEAR_MASK        0xffe
 
 #define OMAP_FUNC_MUX_ARM_BASE  (0xfffe1000 + 0xec)
 
@@ -166,18 +167,24 @@ void omap_set_dma_transfer_params(int lch, int data_type, int elem_count,
         if (cpu_is_omap24xx() && dma_trigger) {
                 u32 val = OMAP_DMA_CCR_REG(lch);
 
+                val &= ~(3 << 19);
                 if (dma_trigger > 63)
                         val |= 1 << 20;
                 if (dma_trigger > 31)
                         val |= 1 << 19;
 
+                val &= ~(0x1f);
                 val |= (dma_trigger & 0x1f);
 
                 if (sync_mode & OMAP_DMA_SYNC_FRAME)
                         val |= 1 << 5;
+                else
+                        val &= ~(1 << 5);
 
                 if (sync_mode & OMAP_DMA_SYNC_BLOCK)
                         val |= 1 << 18;
+                else
+                        val &= ~(1 << 18);
 
                 if (src_or_dst_synch)
                         val |= 1 << 24;         /* source synch */
@@ -286,22 +293,39 @@ void omap_set_dma_src_data_pack(int lch, int enable)
 
 void omap_set_dma_src_burst_mode(int lch, enum omap_dma_burst_mode burst_mode)
 {
+        unsigned int burst = 0;
         OMAP_DMA_CSDP_REG(lch) &= ~(0x03 << 7);
 
         switch (burst_mode) {
         case OMAP_DMA_DATA_BURST_DIS:
                 break;
         case OMAP_DMA_DATA_BURST_4:
-                OMAP_DMA_CSDP_REG(lch) |= (0x02 << 7);
+                if (cpu_is_omap24xx())
+                        burst = 0x1;
+                else
+                        burst = 0x2;
                 break;
         case OMAP_DMA_DATA_BURST_8:
-                /* not supported by current hardware
+                if (cpu_is_omap24xx()) {
+                        burst = 0x2;
+                        break;
+                }
+                /* not supported by current hardware on OMAP1
                  * w |= (0x03 << 7);
                  * fall through
                  */
+        case OMAP_DMA_DATA_BURST_16:
+                if (cpu_is_omap24xx()) {
+                        burst = 0x3;
+                        break;
+                }
+                /* OMAP1 don't support burst 16
+                 * fall through
+                 */
         default:
                 BUG();
         }
+        OMAP_DMA_CSDP_REG(lch) |= (burst << 7);
 }
 
 /* Note that dest_port is only for OMAP1 */
@@ -348,30 +372,49 @@ void omap_set_dma_dest_data_pack(int lch, int enable)
 
 void omap_set_dma_dest_burst_mode(int lch, enum omap_dma_burst_mode burst_mode)
 {
+        unsigned int burst = 0;
         OMAP_DMA_CSDP_REG(lch) &= ~(0x03 << 14);
 
         switch (burst_mode) {
         case OMAP_DMA_DATA_BURST_DIS:
                 break;
         case OMAP_DMA_DATA_BURST_4:
-                OMAP_DMA_CSDP_REG(lch) |= (0x02 << 14);
+                if (cpu_is_omap24xx())
+                        burst = 0x1;
+                else
+                        burst = 0x2;
                 break;
         case OMAP_DMA_DATA_BURST_8:
-                OMAP_DMA_CSDP_REG(lch) |= (0x03 << 14);
+                if (cpu_is_omap24xx())
+                        burst = 0x2;
+                else
+                        burst = 0x3;
                 break;
+        case OMAP_DMA_DATA_BURST_16:
+                if (cpu_is_omap24xx()) {
+                        burst = 0x3;
+                        break;
+                }
+                /* OMAP1 don't support burst 16
+                 * fall through
+                 */
         default:
                 printk(KERN_ERR "Invalid DMA burst mode\n");
                 BUG();
                 return;
         }
+        OMAP_DMA_CSDP_REG(lch) |= (burst << 14);
 }
 
 static inline void omap_enable_channel_irq(int lch)
 {
         u32 status;
 
-        /* Read CSR to make sure it's cleared. */
-        status = OMAP_DMA_CSR_REG(lch);
+        /* Clear CSR */
+        if (cpu_class_is_omap1())
+                status = OMAP_DMA_CSR_REG(lch);
+        else if (cpu_is_omap24xx())
+                OMAP_DMA_CSR_REG(lch) = OMAP2_DMA_CSR_CLEAR_MASK;
 
         /* Enable some nice interrupts. */
         OMAP_DMA_CICR_REG(lch) = dma_chan[lch].enabled_irqs;
@@ -470,11 +513,13 @@ int omap_request_dma(int dev_id, const char *dev_name,
         chan->dev_name = dev_name;
         chan->callback = callback;
         chan->data = data;
-        chan->enabled_irqs = OMAP_DMA_TOUT_IRQ | OMAP_DMA_DROP_IRQ |
-                                OMAP_DMA_BLOCK_IRQ;
+        chan->enabled_irqs = OMAP_DMA_DROP_IRQ | OMAP_DMA_BLOCK_IRQ;
 
-        if (cpu_is_omap24xx())
-                chan->enabled_irqs |= OMAP2_DMA_TRANS_ERR_IRQ;
+        if (cpu_class_is_omap1())
+                chan->enabled_irqs |= OMAP1_DMA_TOUT_IRQ;
+        else if (cpu_is_omap24xx())
+                chan->enabled_irqs |= OMAP2_DMA_MISALIGNED_ERR_IRQ |
+                        OMAP2_DMA_TRANS_ERR_IRQ;
 
         if (cpu_is_omap16xx()) {
                 /* If the sync device is set, configure it dynamically. */
@@ -494,7 +539,7 @@ int omap_request_dma(int dev_id, const char *dev_name,
 
                 omap_enable_channel_irq(free_ch);
                 /* Clear the CSR register and IRQ status register */
-                OMAP_DMA_CSR_REG(free_ch) = 0x0;
+                OMAP_DMA_CSR_REG(free_ch) = OMAP2_DMA_CSR_CLEAR_MASK;
                 omap_writel(~0x0, OMAP_DMA4_IRQSTATUS_L0);
         }
 
@@ -534,7 +579,7 @@ void omap_free_dma(int lch)
                 omap_writel(val, OMAP_DMA4_IRQENABLE_L0);
 
                 /* Clear the CSR register and IRQ status register */
-                OMAP_DMA_CSR_REG(lch) = 0x0;
+                OMAP_DMA_CSR_REG(lch) = OMAP2_DMA_CSR_CLEAR_MASK;
 
                 val = omap_readl(OMAP_DMA4_IRQSTATUS_L0);
                 val |= 1 << lch;
@@ -798,7 +843,7 @@ static int omap1_dma_handle_ch(int ch)
                        "%d (CSR %04x)\n", ch, csr);
                 return 0;
         }
-        if (unlikely(csr & OMAP_DMA_TOUT_IRQ))
+        if (unlikely(csr & OMAP1_DMA_TOUT_IRQ))
                 printk(KERN_WARNING "DMA timeout with device %d\n",
                        dma_chan[ch].dev_id);
         if (unlikely(csr & OMAP_DMA_DROP_IRQ))
@@ -846,20 +891,21 @@ static int omap2_dma_handle_ch(int ch)
                 return 0;
         if (unlikely(dma_chan[ch].dev_id == -1))
                 return 0;
-        /* REVISIT: According to 24xx TRM, there's no TOUT_IE */
-        if (unlikely(status & OMAP_DMA_TOUT_IRQ))
-                printk(KERN_INFO "DMA timeout with device %d\n",
-                       dma_chan[ch].dev_id);
         if (unlikely(status & OMAP_DMA_DROP_IRQ))
                 printk(KERN_INFO
                        "DMA synchronization event drop occurred with device "
                        "%d\n", dma_chan[ch].dev_id);
-
         if (unlikely(status & OMAP2_DMA_TRANS_ERR_IRQ))
                 printk(KERN_INFO "DMA transaction error with device %d\n",
                        dma_chan[ch].dev_id);
+        if (unlikely(status & OMAP2_DMA_SECURE_ERR_IRQ))
+                printk(KERN_INFO "DMA secure error with device %d\n",
+                       dma_chan[ch].dev_id);
+        if (unlikely(status & OMAP2_DMA_MISALIGNED_ERR_IRQ))
+                printk(KERN_INFO "DMA misaligned error with device %d\n",
+                       dma_chan[ch].dev_id);
 
-        OMAP_DMA_CSR_REG(ch) = 0x20;
+        OMAP_DMA_CSR_REG(ch) = OMAP2_DMA_CSR_CLEAR_MASK;
 
         val = omap_readl(OMAP_DMA4_IRQSTATUS_L0);
         /* ch in this function is from 0-31 while in register it is 1-32 */
diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c
index eba3cb52ad87..50524436de63 100644
--- a/arch/arm/plat-omap/dmtimer.c
+++ b/arch/arm/plat-omap/dmtimer.c
@@ -4,7 +4,8 @@
  * OMAP Dual-Mode Timers
  *
  * Copyright (C) 2005 Nokia Corporation
- * Author: Lauri Leukkunen <lauri.leukkunen@nokia.com>
+ * OMAP2 support by Juha Yrjola
+ * API improvements and OMAP2 clock framework support by Timo Teras
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License as published by the
@@ -26,15 +27,17 @@
  */
 
 #include <linux/init.h>
+#include <linux/spinlock.h>
+#include <linux/errno.h>
+#include <linux/list.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
 #include <asm/hardware.h>
 #include <asm/arch/dmtimer.h>
 #include <asm/io.h>
 #include <asm/arch/irqs.h>
-#include <linux/spinlock.h>
-#include <linux/list.h>
-
-#define OMAP_TIMER_COUNT                8
 
+/* register offsets */
 #define OMAP_TIMER_ID_REG               0x00
 #define OMAP_TIMER_OCP_CFG_REG          0x10
 #define OMAP_TIMER_SYS_STAT_REG         0x14
@@ -50,52 +53,196 @@
 #define OMAP_TIMER_CAPTURE_REG          0x3c
 #define OMAP_TIMER_IF_CTRL_REG          0x40
 
+/* timer control reg bits */
+#define OMAP_TIMER_CTRL_GPOCFG          (1 << 14)
+#define OMAP_TIMER_CTRL_CAPTMODE        (1 << 13)
+#define OMAP_TIMER_CTRL_PT              (1 << 12)
+#define OMAP_TIMER_CTRL_TCM_LOWTOHIGH   (0x1 << 8)
+#define OMAP_TIMER_CTRL_TCM_HIGHTOLOW   (0x2 << 8)
+#define OMAP_TIMER_CTRL_TCM_BOTHEDGES   (0x3 << 8)
+#define OMAP_TIMER_CTRL_SCPWM           (1 << 7)
+#define OMAP_TIMER_CTRL_CE              (1 << 6)        /* compare enable */
+#define OMAP_TIMER_CTRL_PRE             (1 << 5)        /* prescaler enable */
+#define OMAP_TIMER_CTRL_PTV_SHIFT       2               /* how much to shift the prescaler value */
+#define OMAP_TIMER_CTRL_AR              (1 << 1)        /* auto-reload enable */
+#define OMAP_TIMER_CTRL_ST              (1 << 0)        /* start timer */
+
+struct omap_dm_timer {
+        unsigned long phys_base;
+        int irq;
+#ifdef CONFIG_ARCH_OMAP2
+        struct clk *iclk, *fclk;
+#endif
+        void __iomem *io_base;
+        unsigned reserved:1;
+};
 
-static struct dmtimer_info_struct {
-        struct list_head        unused_timers;
-        struct list_head        reserved_timers;
-} dm_timer_info;
+#ifdef CONFIG_ARCH_OMAP1
 
 static struct omap_dm_timer dm_timers[] = {
-        { .base=0xfffb1400, .irq=INT_1610_GPTIMER1 },
-        { .base=0xfffb1c00, .irq=INT_1610_GPTIMER2 },
-        { .base=0xfffb2400, .irq=INT_1610_GPTIMER3 },
-        { .base=0xfffb2c00, .irq=INT_1610_GPTIMER4 },
-        { .base=0xfffb3400, .irq=INT_1610_GPTIMER5 },
-        { .base=0xfffb3c00, .irq=INT_1610_GPTIMER6 },
-        { .base=0xfffb4400, .irq=INT_1610_GPTIMER7 },
-        { .base=0xfffb4c00, .irq=INT_1610_GPTIMER8 },
-        { .base=0x0 },
+        { .phys_base = 0xfffb1400, .irq = INT_1610_GPTIMER1 },
+        { .phys_base = 0xfffb1c00, .irq = INT_1610_GPTIMER2 },
+        { .phys_base = 0xfffb2400, .irq = INT_1610_GPTIMER3 },
+        { .phys_base = 0xfffb2c00, .irq = INT_1610_GPTIMER4 },
+        { .phys_base = 0xfffb3400, .irq = INT_1610_GPTIMER5 },
+        { .phys_base = 0xfffb3c00, .irq = INT_1610_GPTIMER6 },
+        { .phys_base = 0xfffb4400, .irq = INT_1610_GPTIMER7 },
+        { .phys_base = 0xfffb4c00, .irq = INT_1610_GPTIMER8 },
 };
 
+#elif defined(CONFIG_ARCH_OMAP2)
+
+static struct omap_dm_timer dm_timers[] = {
+        { .phys_base = 0x48028000, .irq = INT_24XX_GPTIMER1 },
+        { .phys_base = 0x4802a000, .irq = INT_24XX_GPTIMER2 },
+        { .phys_base = 0x48078000, .irq = INT_24XX_GPTIMER3 },
+        { .phys_base = 0x4807a000, .irq = INT_24XX_GPTIMER4 },
+        { .phys_base = 0x4807c000, .irq = INT_24XX_GPTIMER5 },
+        { .phys_base = 0x4807e000, .irq = INT_24XX_GPTIMER6 },
+        { .phys_base = 0x48080000, .irq = INT_24XX_GPTIMER7 },
+        { .phys_base = 0x48082000, .irq = INT_24XX_GPTIMER8 },
+        { .phys_base = 0x48084000, .irq = INT_24XX_GPTIMER9 },
+        { .phys_base = 0x48086000, .irq = INT_24XX_GPTIMER10 },
+        { .phys_base = 0x48088000, .irq = INT_24XX_GPTIMER11 },
+        { .phys_base = 0x4808a000, .irq = INT_24XX_GPTIMER12 },
+};
+
+static const char *dm_source_names[] = {
+        "sys_ck",
+        "func_32k_ck",
+        "alt_ck"
+};
 
+static struct clk *dm_source_clocks[3];
+
+#else
+
+#error OMAP architecture not supported!
+
+#endif
+
+static const int dm_timer_count = ARRAY_SIZE(dm_timers);
 static spinlock_t dm_timer_lock;
 
+static inline u32 omap_dm_timer_read_reg(struct omap_dm_timer *timer, int reg)
+{
+        return readl(timer->io_base + reg);
+}
 
-inline void omap_dm_timer_write_reg(struct omap_dm_timer *timer, int reg, u32 value)
+static void omap_dm_timer_write_reg(struct omap_dm_timer *timer, int reg, u32 value)
 {
-        omap_writel(value, timer->base + reg);
+        writel(value, timer->io_base + reg);
         while (omap_dm_timer_read_reg(timer, OMAP_TIMER_WRITE_PEND_REG))
                 ;
 }
 
-u32 omap_dm_timer_read_reg(struct omap_dm_timer *timer, int reg)
+static void omap_dm_timer_wait_for_reset(struct omap_dm_timer *timer)
 {
-        return omap_readl(timer->base + reg);
+        int c;
+
+        c = 0;
+        while (!(omap_dm_timer_read_reg(timer, OMAP_TIMER_SYS_STAT_REG) & 1)) {
+                c++;
+                if (c > 100000) {
+                        printk(KERN_ERR "Timer failed to reset\n");
+                        return;
+                }
+        }
 }
 
-int omap_dm_timers_active(void)
+static void omap_dm_timer_reset(struct omap_dm_timer *timer)
+{
+        u32 l;
+
+        if (timer != &dm_timers[0]) {
+                omap_dm_timer_write_reg(timer, OMAP_TIMER_IF_CTRL_REG, 0x06);
+                omap_dm_timer_wait_for_reset(timer);
+        }
+        omap_dm_timer_set_source(timer, OMAP_TIMER_SRC_SYS_CLK);
+
+        /* Set to smart-idle mode */
+        l = omap_dm_timer_read_reg(timer, OMAP_TIMER_OCP_CFG_REG);
+        l |= 0x02 << 3;
+        omap_dm_timer_write_reg(timer, OMAP_TIMER_OCP_CFG_REG, l);
+}
+
+static void omap_dm_timer_prepare(struct omap_dm_timer *timer)
+{
+#ifdef CONFIG_ARCH_OMAP2
+        clk_enable(timer->iclk);
+        clk_enable(timer->fclk);
+#endif
+        omap_dm_timer_reset(timer);
+}
+
+struct omap_dm_timer *omap_dm_timer_request(void)
+{
+        struct omap_dm_timer *timer = NULL;
+        unsigned long flags;
+        int i;
+
+        spin_lock_irqsave(&dm_timer_lock, flags);
+        for (i = 0; i < dm_timer_count; i++) {
+                if (dm_timers[i].reserved)
+                        continue;
+
+                timer = &dm_timers[i];
+                timer->reserved = 1;
+                break;
+        }
+        spin_unlock_irqrestore(&dm_timer_lock, flags);
+
+        if (timer != NULL)
+                omap_dm_timer_prepare(timer);
+
+        return timer;
+}
+
+struct omap_dm_timer *omap_dm_timer_request_specific(int id)
 {
         struct omap_dm_timer *timer;
+        unsigned long flags;
 
-        for (timer = &dm_timers[0]; timer->base; ++timer)
-                if (omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG) &
-                    OMAP_TIMER_CTRL_ST)
-                        return 1;
+        spin_lock_irqsave(&dm_timer_lock, flags);
+        if (id <= 0 || id > dm_timer_count || dm_timers[id-1].reserved) {
+                spin_unlock_irqrestore(&dm_timer_lock, flags);
+                printk("BUG: warning at %s:%d/%s(): unable to get timer %d\n",
+                       __FILE__, __LINE__, __FUNCTION__, id);
+                dump_stack();
+                return NULL;
+        }
 
-        return 0;
+        timer = &dm_timers[id-1];
+        timer->reserved = 1;
+        spin_unlock_irqrestore(&dm_timer_lock, flags);
+
+        omap_dm_timer_prepare(timer);
+
+        return timer;
 }
 
+void omap_dm_timer_free(struct omap_dm_timer *timer)
+{
+        omap_dm_timer_reset(timer);
+#ifdef CONFIG_ARCH_OMAP2
+        clk_disable(timer->iclk);
+        clk_disable(timer->fclk);
+#endif
+        WARN_ON(!timer->reserved);
+        timer->reserved = 0;
+}
+
+int omap_dm_timer_get_irq(struct omap_dm_timer *timer)
+{
+        return timer->irq;
+}
+
+#if defined(CONFIG_ARCH_OMAP1)
+
+struct clk *omap_dm_timer_get_fclk(struct omap_dm_timer *timer)
+{
+        BUG();
+}
 
 /**
  * omap_dm_timer_modify_idlect_mask - Check if any running timers use ARMXOR
@@ -103,184 +250,229 @@ int omap_dm_timers_active(void)
  */
 __u32 omap_dm_timer_modify_idlect_mask(__u32 inputmask)
 {
-        int n;
+        int i;
 
         /* If ARMXOR cannot be idled this function call is unnecessary */
         if (!(inputmask & (1 << 1)))
                 return inputmask;
 
         /* If any active timer is using ARMXOR return modified mask */
-        for (n = 0; dm_timers[n].base; ++n)
-                if (omap_dm_timer_read_reg(&dm_timers[n], OMAP_TIMER_CTRL_REG)&
-                    OMAP_TIMER_CTRL_ST) {
-                        if (((omap_readl(MOD_CONF_CTRL_1)>>(n*2)) & 0x03) == 0)
+        for (i = 0; i < dm_timer_count; i++) {
+                u32 l;
+
+                l = omap_dm_timer_read_reg(&dm_timers[i], OMAP_TIMER_CTRL_REG);
+                if (l & OMAP_TIMER_CTRL_ST) {
+                        if (((omap_readl(MOD_CONF_CTRL_1) >> (i * 2)) & 0x03) == 0)
                                 inputmask &= ~(1 << 1);
                         else
                                 inputmask &= ~(1 << 2);
                 }
+        }
 
         return inputmask;
 }
 
+#elif defined(CONFIG_ARCH_OMAP2)
 
-void omap_dm_timer_set_source(struct omap_dm_timer *timer, int source)
+struct clk *omap_dm_timer_get_fclk(struct omap_dm_timer *timer)
 {
-        int n = (timer - dm_timers) << 1;
-        u32 l;
+        return timer->fclk;
+}
 
-        l = omap_readl(MOD_CONF_CTRL_1) & ~(0x03 << n);
-        l |= source << n;
-        omap_writel(l, MOD_CONF_CTRL_1);
+__u32 omap_dm_timer_modify_idlect_mask(__u32 inputmask)
+{
+        BUG();
 }
 
+#endif
 
-static void omap_dm_timer_reset(struct omap_dm_timer *timer)
+void omap_dm_timer_trigger(struct omap_dm_timer *timer)
 {
-        /* Reset and set posted mode */
-        omap_dm_timer_write_reg(timer, OMAP_TIMER_IF_CTRL_REG, 0x06);
-        omap_dm_timer_write_reg(timer, OMAP_TIMER_OCP_CFG_REG, 0x02);
-
-        omap_dm_timer_set_source(timer, OMAP_TIMER_SRC_ARMXOR);
+        omap_dm_timer_write_reg(timer, OMAP_TIMER_TRIGGER_REG, 0);
 }
 
+void omap_dm_timer_start(struct omap_dm_timer *timer)
+{
+        u32 l;
 
+        l = omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG);
+        if (!(l & OMAP_TIMER_CTRL_ST)) {
+                l |= OMAP_TIMER_CTRL_ST;
+                omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l);
+        }
+}
 
-struct omap_dm_timer * omap_dm_timer_request(void)
+void omap_dm_timer_stop(struct omap_dm_timer *timer)
 {
-        struct omap_dm_timer *timer = NULL;
-        unsigned long flags;
+        u32 l;
 
-        spin_lock_irqsave(&dm_timer_lock, flags);
-        if (!list_empty(&dm_timer_info.unused_timers)) {
-                timer = (struct omap_dm_timer *)
-                                dm_timer_info.unused_timers.next;
-                list_move_tail((struct list_head *)timer,
-                                &dm_timer_info.reserved_timers);
+        l = omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG);
+        if (l & OMAP_TIMER_CTRL_ST) {
+                l &= ~0x1;
+                omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l);
         }
-        spin_unlock_irqrestore(&dm_timer_lock, flags);
-
-        return timer;
 }
 
+#ifdef CONFIG_ARCH_OMAP1
 
-void omap_dm_timer_free(struct omap_dm_timer *timer)
+void omap_dm_timer_set_source(struct omap_dm_timer *timer, int source)
 {
-        unsigned long flags;
-
-        omap_dm_timer_reset(timer);
+        int n = (timer - dm_timers) << 1;
+        u32 l;
 
-        spin_lock_irqsave(&dm_timer_lock, flags);
-        list_move_tail((struct list_head *)timer, &dm_timer_info.unused_timers);
-        spin_unlock_irqrestore(&dm_timer_lock, flags);
+        l = omap_readl(MOD_CONF_CTRL_1) & ~(0x03 << n);
+        l |= source << n;
+        omap_writel(l, MOD_CONF_CTRL_1);
 }
 
-void omap_dm_timer_set_int_enable(struct omap_dm_timer *timer,
-                                unsigned int value)
-{
-        omap_dm_timer_write_reg(timer, OMAP_TIMER_INT_EN_REG, value);
-}
+#else
 
-unsigned int omap_dm_timer_read_status(struct omap_dm_timer *timer)
+void omap_dm_timer_set_source(struct omap_dm_timer *timer, int source)
 {
-        return omap_dm_timer_read_reg(timer, OMAP_TIMER_STAT_REG);
-}
+        if (source < 0 || source >= 3)
+                return;
 
-void omap_dm_timer_write_status(struct omap_dm_timer *timer, unsigned int value)
-{
-        omap_dm_timer_write_reg(timer, OMAP_TIMER_STAT_REG, value);
+        clk_disable(timer->fclk);
+        clk_set_parent(timer->fclk, dm_source_clocks[source]);
+        clk_enable(timer->fclk);
+
+        /* When the functional clock disappears, too quick writes seem to
+         * cause an abort. */
+        __delay(15000);
 }
 
-void omap_dm_timer_enable_autoreload(struct omap_dm_timer *timer)
+#endif
+
+void omap_dm_timer_set_load(struct omap_dm_timer *timer, int autoreload,
+                            unsigned int load)
 {
         u32 l;
+
         l = omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG);
-        l |= OMAP_TIMER_CTRL_AR;
+        if (autoreload)
+                l |= OMAP_TIMER_CTRL_AR;
+        else
+                l &= ~OMAP_TIMER_CTRL_AR;
         omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l);
+        omap_dm_timer_write_reg(timer, OMAP_TIMER_LOAD_REG, load);
+        omap_dm_timer_write_reg(timer, OMAP_TIMER_TRIGGER_REG, 0);
 }
 
-void omap_dm_timer_trigger(struct omap_dm_timer *timer)
-{
-        omap_dm_timer_write_reg(timer, OMAP_TIMER_TRIGGER_REG, 1);
-}
-
-void omap_dm_timer_set_trigger(struct omap_dm_timer *timer, unsigned int value)
+void omap_dm_timer_set_match(struct omap_dm_timer *timer, int enable,
+                             unsigned int match)
 {
         u32 l;
 
         l = omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG);
-        l |= value & 0x3;
+        if (enable)
+                l |= OMAP_TIMER_CTRL_CE;
+        else
+                l &= ~OMAP_TIMER_CTRL_CE;
         omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l);
+        omap_dm_timer_write_reg(timer, OMAP_TIMER_MATCH_REG, match);
 }
 
-void omap_dm_timer_start(struct omap_dm_timer *timer)
+
+void omap_dm_timer_set_pwm(struct omap_dm_timer *timer, int def_on,
+                           int toggle, int trigger)
 {
         u32 l;
 
         l = omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG);
-        l |= OMAP_TIMER_CTRL_ST;
+        l &= ~(OMAP_TIMER_CTRL_GPOCFG | OMAP_TIMER_CTRL_SCPWM |
+               OMAP_TIMER_CTRL_PT | (0x03 << 10));
+        if (def_on)
+                l |= OMAP_TIMER_CTRL_SCPWM;
+        if (toggle)
+                l |= OMAP_TIMER_CTRL_PT;
+        l |= trigger << 10;
         omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l);
 }
 
-void omap_dm_timer_stop(struct omap_dm_timer *timer)
+void omap_dm_timer_set_prescaler(struct omap_dm_timer *timer, int prescaler)
 {
         u32 l;
 
         l = omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG);
-        l &= ~0x1;
+        l &= ~(OMAP_TIMER_CTRL_PRE | (0x07 << 2));
+        if (prescaler >= 0x00 && prescaler <= 0x07) {
+                l |= OMAP_TIMER_CTRL_PRE;
+                l |= prescaler << 2;
+        }
         omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l);
 }
 
-unsigned int omap_dm_timer_read_counter(struct omap_dm_timer *timer)
+void omap_dm_timer_set_int_enable(struct omap_dm_timer *timer,
+                                  unsigned int value)
 {
-        return omap_dm_timer_read_reg(timer, OMAP_TIMER_COUNTER_REG);
+        omap_dm_timer_write_reg(timer, OMAP_TIMER_INT_EN_REG, value);
 }
 
-void omap_dm_timer_reset_counter(struct omap_dm_timer *timer)
+unsigned int omap_dm_timer_read_status(struct omap_dm_timer *timer)
 {
-        omap_dm_timer_write_reg(timer, OMAP_TIMER_COUNTER_REG, 0);
+        return omap_dm_timer_read_reg(timer, OMAP_TIMER_STAT_REG);
 }
 
-void omap_dm_timer_set_load(struct omap_dm_timer *timer, unsigned int load)
+void omap_dm_timer_write_status(struct omap_dm_timer *timer, unsigned int value)
 {
-        omap_dm_timer_write_reg(timer, OMAP_TIMER_LOAD_REG, load);
+        omap_dm_timer_write_reg(timer, OMAP_TIMER_STAT_REG, value);
 }
 
-void omap_dm_timer_set_match(struct omap_dm_timer *timer, unsigned int match)
+unsigned int omap_dm_timer_read_counter(struct omap_dm_timer *timer)
 {
-        omap_dm_timer_write_reg(timer, OMAP_TIMER_MATCH_REG, match);
+        return omap_dm_timer_read_reg(timer, OMAP_TIMER_COUNTER_REG);
 }
 
-void omap_dm_timer_enable_compare(struct omap_dm_timer *timer)
+void omap_dm_timer_write_counter(struct omap_dm_timer *timer, unsigned int value)
 {
-        u32 l;
-
-        l = omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG);
-        l |= OMAP_TIMER_CTRL_CE;
-        omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l);
+        return omap_dm_timer_write_reg(timer, OMAP_TIMER_COUNTER_REG, value);
 }
 
+int omap_dm_timers_active(void)
+{
+        int i;
+
+        for (i = 0; i < dm_timer_count; i++) {
+                struct omap_dm_timer *timer;
+
+                timer = &dm_timers[i];
+                if (omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG) &
+                    OMAP_TIMER_CTRL_ST)
+                        return 1;
+        }
+        return 0;
+}
 
-static inline void __dm_timer_init(void)
+int omap_dm_timer_init(void)
 {
         struct omap_dm_timer *timer;
+        int i;
+
+        if (!(cpu_is_omap16xx() || cpu_is_omap24xx()))
+                return -ENODEV;
 
         spin_lock_init(&dm_timer_lock);
-        INIT_LIST_HEAD(&dm_timer_info.unused_timers);
-        INIT_LIST_HEAD(&dm_timer_info.reserved_timers);
-
-        timer = &dm_timers[0];
-        while (timer->base) {
-                list_add_tail((struct list_head *)timer, &dm_timer_info.unused_timers);
-                omap_dm_timer_reset(timer);
-                timer++;
+#ifdef CONFIG_ARCH_OMAP2
+        for (i = 0; i < ARRAY_SIZE(dm_source_names); i++) {
+                dm_source_clocks[i] = clk_get(NULL, dm_source_names[i]);
+                BUG_ON(dm_source_clocks[i] == NULL);
+        }
+#endif
+
+        for (i = 0; i < dm_timer_count; i++) {
+#ifdef CONFIG_ARCH_OMAP2
+                char clk_name[16];
+#endif
+
+                timer = &dm_timers[i];
+                timer->io_base = (void __iomem *) io_p2v(timer->phys_base);
+#ifdef CONFIG_ARCH_OMAP2
+                sprintf(clk_name, "gpt%d_ick", i + 1);
+                timer->iclk = clk_get(NULL, clk_name);
+                sprintf(clk_name, "gpt%d_fck", i + 1);
+                timer->fclk = clk_get(NULL, clk_name);
+#endif
         }
-}
 
-static int __init omap_dm_timer_init(void)
-{
-        if (cpu_is_omap16xx())
-                __dm_timer_init();
         return 0;
 }
-
-arch_initcall(omap_dm_timer_init);
diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
index d3c8ea7eecfd..e75a2ca70ba1 100644
--- a/arch/arm/plat-omap/gpio.c
+++ b/arch/arm/plat-omap/gpio.c
@@ -537,6 +537,49 @@ static inline void _clear_gpio_irqstatus(struct gpio_bank *bank, int gpio)
         _clear_gpio_irqbank(bank, 1 << get_gpio_index(gpio));
 }
 
+static u32 _get_gpio_irqbank_mask(struct gpio_bank *bank)
+{
+        void __iomem *reg = bank->base;
+        int inv = 0;
+        u32 l;
+        u32 mask;
+
+        switch (bank->method) {
+        case METHOD_MPUIO:
+                reg += OMAP_MPUIO_GPIO_MASKIT;
+                mask = 0xffff;
+                inv = 1;
+                break;
+        case METHOD_GPIO_1510:
+                reg += OMAP1510_GPIO_INT_MASK;
+                mask = 0xffff;
+                inv = 1;
+                break;
+        case METHOD_GPIO_1610:
+                reg += OMAP1610_GPIO_IRQENABLE1;
+                mask = 0xffff;
+                break;
+        case METHOD_GPIO_730:
+                reg += OMAP730_GPIO_INT_MASK;
+                mask = 0xffffffff;
+                inv = 1;
+                break;
+        case METHOD_GPIO_24XX:
+                reg += OMAP24XX_GPIO_IRQENABLE1;
+                mask = 0xffffffff;
+                break;
+        default:
+                BUG();
+                return 0;
+        }
+
+        l = __raw_readl(reg);
+        if (inv)
+                l = ~l;
+        l &= mask;
+        return l;
+}
+
 static void _enable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask, int enable)
 {
         void __iomem *reg = bank->base;
@@ -736,6 +779,8 @@ static void gpio_irq_handler(unsigned int irq, struct irqdesc *desc,
         u32 isr;
         unsigned int gpio_irq;
         struct gpio_bank *bank;
+        u32 retrigger = 0;
+        int unmasked = 0;
 
         desc->chip->ack(irq);
 
@@ -760,18 +805,22 @@ static void gpio_irq_handler(unsigned int irq, struct irqdesc *desc,
 #endif
         while(1) {
                 u32 isr_saved, level_mask = 0;
+                u32 enabled;
 
-                isr_saved = isr = __raw_readl(isr_reg);
+                enabled = _get_gpio_irqbank_mask(bank);
+                isr_saved = isr = __raw_readl(isr_reg) & enabled;
 
                 if (cpu_is_omap15xx() && (bank->method == METHOD_MPUIO))
                         isr &= 0x0000ffff;
 
-                if (cpu_is_omap24xx())
+                if (cpu_is_omap24xx()) {
                         level_mask =
                                 __raw_readl(bank->base +
                                         OMAP24XX_GPIO_LEVELDETECT0) |
                                 __raw_readl(bank->base +
                                         OMAP24XX_GPIO_LEVELDETECT1);
+                        level_mask &= enabled;
+                }
 
                 /* clear edge sensitive interrupts before handler(s) are
                 called so that we don't miss any interrupt occurred while
@@ -782,19 +831,54 @@ static void gpio_irq_handler(unsigned int irq, struct irqdesc *desc,
 
                 /* if there is only edge sensitive GPIO pin interrupts
                 configured, we could unmask GPIO bank interrupt immediately */
-                if (!level_mask)
+                if (!level_mask && !unmasked) {
+                        unmasked = 1;
                         desc->chip->unmask(irq);
+                }
 
+                isr |= retrigger;
+                retrigger = 0;
                 if (!isr)
                         break;
 
                 gpio_irq = bank->virtual_irq_start;
                 for (; isr != 0; isr >>= 1, gpio_irq++) {
                         struct irqdesc *d;
+                        int irq_mask;
                         if (!(isr & 1))
                                 continue;
                         d = irq_desc + gpio_irq;
+                        /* Don't run the handler if it's already running
+                         * or was disabled lazely.
+                         */
+                        if (unlikely((d->disable_depth || d->running))) {
+                                irq_mask = 1 <<
+                                        (gpio_irq - bank->virtual_irq_start);
+                                /* The unmasking will be done by
+                                 * enable_irq in case it is disabled or
+                                 * after returning from the handler if
+                                 * it's already running.
+                                 */
+                                _enable_gpio_irqbank(bank, irq_mask, 0);
+                                if (!d->disable_depth) {
+                                        /* Level triggered interrupts
+                                         * won't ever be reentered
+                                         */
+                                        BUG_ON(level_mask & irq_mask);
+                                        d->pending = 1;
+                                }
+                                continue;
+                        }
+                        d->running = 1;
                         desc_handle_irq(gpio_irq, d, regs);
+                        d->running = 0;
+                        if (unlikely(d->pending && !d->disable_depth)) {
+                                irq_mask = 1 <<
+                                        (gpio_irq - bank->virtual_irq_start);
+                                d->pending = 0;
+                                _enable_gpio_irqbank(bank, irq_mask, 1);
+                                retrigger |= irq_mask;
+                        }
                 }
 
                 if (cpu_is_omap24xx()) {
@@ -804,13 +888,14 @@ static void gpio_irq_handler(unsigned int irq, struct irqdesc *desc,
                         _enable_gpio_irqbank(bank, isr_saved & level_mask, 1);
                 }
 
-                /* if bank has any level sensitive GPIO pin interrupt
-                configured, we must unmask the bank interrupt only after
-                handler(s) are executed in order to avoid spurious bank
-                interrupt */
-                if (level_mask)
-                        desc->chip->unmask(irq);
         }
+        /* if bank has any level sensitive GPIO pin interrupt
+        configured, we must unmask the bank interrupt only after
+        handler(s) are executed in order to avoid spurious bank
+        interrupt */
+        if (!unmasked)
+                desc->chip->unmask(irq);
+
 }
 
 static void gpio_ack_irq(unsigned int irq)
diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c
index b7bf09b1b412..aebd06faf2cf 100644
--- a/arch/arm/plat-omap/sram.c
+++ b/arch/arm/plat-omap/sram.c
@@ -158,14 +158,12 @@ static struct map_desc omap_sram_io_desc[] __initdata = {
         {       /* .length gets filled in at runtime */
                 .virtual        = OMAP1_SRAM_VA,
                 .pfn            = __phys_to_pfn(OMAP1_SRAM_PA),
-                .type           = MT_DEVICE
+                .type           = MT_MEMORY
         }
 };
 
 /*
- * In order to use last 2kB of SRAM on 1611b, we must round the size
- * up to multiple of PAGE_SIZE. We cannot use ioremap for SRAM, as
- * clock init needs SRAM early.
+ * Note that we cannot use ioremap for SRAM, as clock init needs SRAM early.
  */
 void __init omap_map_sram(void)
 {
@@ -185,8 +183,7 @@ void __init omap_map_sram(void)
                 omap_sram_io_desc[0].pfn = __phys_to_pfn(base);
         }
 
-        omap_sram_io_desc[0].length = (omap_sram_size + PAGE_SIZE-1)/PAGE_SIZE;
-        omap_sram_io_desc[0].length *= PAGE_SIZE;
+        omap_sram_io_desc[0].length = 1024 * 1024;      /* Use section desc */
         iotable_init(omap_sram_io_desc, ARRAY_SIZE(omap_sram_io_desc));
 
         printk(KERN_INFO "SRAM: Mapped pa 0x%08lx to va 0x%08lx size: 0x%lx\n",
diff --git a/arch/arm/plat-omap/timer32k.c b/arch/arm/plat-omap/timer32k.c
index 3461a6c9665c..ea9f3732630b 100644
--- a/arch/arm/plat-omap/timer32k.c
+++ b/arch/arm/plat-omap/timer32k.c
@@ -7,6 +7,7 @@
  * Partial timer rewrite and additional dynamic tick timer support by
  * Tony Lindgen <tony@atomide.com> and
  * Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
+ * OMAP Dual-mode timer framework support by Timo Teras
  *
  * MPU timer code based on the older MPU timer code for OMAP
  * Copyright (C) 2000 RidgeRun, Inc.
@@ -50,6 +51,7 @@
 #include <asm/irq.h>
 #include <asm/mach/irq.h>
 #include <asm/mach/time.h>
+#include <asm/arch/dmtimer.h>
 
 struct sys_timer omap_timer;
 
@@ -79,18 +81,6 @@ struct sys_timer omap_timer;
 #define OMAP1_32K_TIMER_TVR             0x00
 #define OMAP1_32K_TIMER_TCR             0x04
 
-/* 24xx specific defines */
-#define OMAP2_GP_TIMER_BASE             0x48028000
-#define CM_CLKSEL_WKUP                  0x48008440
-#define GP_TIMER_TIDR                   0x00
-#define GP_TIMER_TISR                   0x18
-#define GP_TIMER_TIER                   0x1c
-#define GP_TIMER_TCLR                   0x24
-#define GP_TIMER_TCRR                   0x28
-#define GP_TIMER_TLDR                   0x2c
-#define GP_TIMER_TTGR                   0x30
-#define GP_TIMER_TSICR                  0x40
-
 #define OMAP_32K_TICKS_PER_HZ           (32768 / HZ)
 
 /*
@@ -102,54 +92,62 @@ struct sys_timer omap_timer;
 #define JIFFIES_TO_HW_TICKS(nr_jiffies, clock_rate)                     \
                                 (((nr_jiffies) * (clock_rate)) / HZ)
 
+#if defined(CONFIG_ARCH_OMAP1)
+
 static inline void omap_32k_timer_write(int val, int reg)
 {
-        if (cpu_class_is_omap1())
-                omap_writew(val, OMAP1_32K_TIMER_BASE + reg);
-
-        if (cpu_is_omap24xx())
-                omap_writel(val, OMAP2_GP_TIMER_BASE + reg);
+        omap_writew(val, OMAP1_32K_TIMER_BASE + reg);
 }
 
 static inline unsigned long omap_32k_timer_read(int reg)
 {
-        if (cpu_class_is_omap1())
-                return omap_readl(OMAP1_32K_TIMER_BASE + reg) & 0xffffff;
+        return omap_readl(OMAP1_32K_TIMER_BASE + reg) & 0xffffff;
+}
 
-        if (cpu_is_omap24xx())
-                return omap_readl(OMAP2_GP_TIMER_BASE + reg);
+static inline void omap_32k_timer_start(unsigned long load_val)
+{
+        omap_32k_timer_write(load_val, OMAP1_32K_TIMER_TVR);
+        omap_32k_timer_write(0x0f, OMAP1_32K_TIMER_CR);
 }
 
-/*
- * The 32KHz synchronized timer is an additional timer on 16xx.
- * It is always running.
- */
-static inline unsigned long omap_32k_sync_timer_read(void)
+static inline void omap_32k_timer_stop(void)
 {
-        return omap_readl(TIMER_32K_SYNCHRONIZED);
+        omap_32k_timer_write(0x0, OMAP1_32K_TIMER_CR);
 }
 
+#define omap_32k_timer_ack_irq()
+
+#elif defined(CONFIG_ARCH_OMAP2)
+
+static struct omap_dm_timer *gptimer;
+
 static inline void omap_32k_timer_start(unsigned long load_val)
 {
-        if (cpu_class_is_omap1()) {
-                omap_32k_timer_write(load_val, OMAP1_32K_TIMER_TVR);
-                omap_32k_timer_write(0x0f, OMAP1_32K_TIMER_CR);
-        }
-
-        if (cpu_is_omap24xx()) {
-                omap_32k_timer_write(0xffffffff - load_val, GP_TIMER_TCRR);
-                omap_32k_timer_write((1 << 1), GP_TIMER_TIER);
-                omap_32k_timer_write((1 << 1) | 1, GP_TIMER_TCLR);
-        }
+        omap_dm_timer_set_load(gptimer, 1, 0xffffffff - load_val);
+        omap_dm_timer_set_int_enable(gptimer, OMAP_TIMER_INT_OVERFLOW);
+        omap_dm_timer_start(gptimer);
 }
 
 static inline void omap_32k_timer_stop(void)
 {
-        if (cpu_class_is_omap1())
-                omap_32k_timer_write(0x0, OMAP1_32K_TIMER_CR);
+        omap_dm_timer_stop(gptimer);
+}
 
-        if (cpu_is_omap24xx())
-                omap_32k_timer_write(0x0, GP_TIMER_TCLR);
+static inline void omap_32k_timer_ack_irq(void)
+{
+        u32 status = omap_dm_timer_read_status(gptimer);
+        omap_dm_timer_write_status(gptimer, status);
+}
+
+#endif
+
+/*
+ * The 32KHz synchronized timer is an additional timer on 16xx.
+ * It is always running.
+ */
+static inline unsigned long omap_32k_sync_timer_read(void)
+{
+        return omap_readl(TIMER_32K_SYNCHRONIZED);
 }
 
 /*
@@ -203,11 +201,7 @@ static irqreturn_t omap_32k_timer_interrupt(int irq, void *dev_id,
 
         write_seqlock_irqsave(&xtime_lock, flags);
 
-        if (cpu_is_omap24xx()) {
-                u32 status = omap_32k_timer_read(GP_TIMER_TISR);
-                omap_32k_timer_write(status, GP_TIMER_TISR);
-        }
-
+        omap_32k_timer_ack_irq();
         now = omap_32k_sync_timer_read();
 
         while ((signed long)(now - omap_32k_last_tick)
@@ -269,9 +263,6 @@ static struct irqaction omap_32k_timer_irq = {
         .handler        = omap_32k_timer_interrupt,
 };
 
-static struct clk * gpt1_ick;
-static struct clk * gpt1_fck;
-
 static __init void omap_init_32k_timer(void)
 {
 #ifdef CONFIG_NO_IDLE_HZ
@@ -280,32 +271,22 @@ static __init void omap_init_32k_timer(void)
 
         if (cpu_class_is_omap1())
                 setup_irq(INT_OS_TIMER, &omap_32k_timer_irq);
-        if (cpu_is_omap24xx())
-                setup_irq(37, &omap_32k_timer_irq);
         omap_timer.offset  = omap_32k_timer_gettimeoffset;
         omap_32k_last_tick = omap_32k_sync_timer_read();
 
+#ifdef CONFIG_ARCH_OMAP2
         /* REVISIT: Check 24xx TIOCP_CFG settings after idle works */
         if (cpu_is_omap24xx()) {
-                omap_32k_timer_write(0, GP_TIMER_TCLR);
-                omap_writel(0, CM_CLKSEL_WKUP);         /* 32KHz clock source */
-
-                gpt1_ick = clk_get(NULL, "gpt1_ick");
-                if (IS_ERR(gpt1_ick))
-                        printk(KERN_ERR "Could not get gpt1_ick\n");
-                else
-                        clk_enable(gpt1_ick);
-
-                gpt1_fck = clk_get(NULL, "gpt1_fck");
-                if (IS_ERR(gpt1_fck))
-                        printk(KERN_ERR "Could not get gpt1_fck\n");
-                else
-                        clk_enable(gpt1_fck);
-
-                mdelay(100);            /* Wait for clocks to stabilize */
-
-                omap_32k_timer_write(0x7, GP_TIMER_TISR);
+                gptimer = omap_dm_timer_request_specific(1);
+                BUG_ON(gptimer == NULL);
+
+                omap_dm_timer_set_source(gptimer, OMAP_TIMER_SRC_32_KHZ);
+                setup_irq(omap_dm_timer_get_irq(gptimer), &omap_32k_timer_irq);
+                omap_dm_timer_set_int_enable(gptimer,
+                        OMAP_TIMER_INT_CAPTURE | OMAP_TIMER_INT_OVERFLOW |
+                        OMAP_TIMER_INT_MATCH);
         }
+#endif
 
         omap_32k_timer_start(OMAP_32K_TIMER_TICK_PERIOD);
 }
@@ -317,6 +298,9 @@ static __init void omap_init_32k_timer(void)
  */
 static void __init omap_timer_init(void)
 {
+#ifdef CONFIG_OMAP_DM_TIMER
+        omap_dm_timer_init();
+#endif
         omap_init_32k_timer();
 }
 
diff --git a/drivers/mmc/omap.c b/drivers/mmc/omap.c
index c25244b3657b..2b7996da875b 100644
--- a/drivers/mmc/omap.c
+++ b/drivers/mmc/omap.c
@@ -61,6 +61,7 @@ struct mmc_omap_host {
         unsigned char           id; /* 16xx chips have 2 MMC blocks */
         struct clk *            iclk;
         struct clk *            fclk;
+        struct resource         *res;
         void __iomem            *base;
         int                     irq;
         unsigned char           bus_mode;
@@ -340,8 +341,6 @@ static void
 mmc_omap_xfer_data(struct mmc_omap_host *host, int write)
 {
         int n;
-        void __iomem *reg;
-        u16 *p;
 
         if (host->buffer_bytes_left == 0) {
                 host->sg_idx++;
@@ -658,12 +657,12 @@ static void mmc_omap_dma_cb(int lch, u16 ch_status, void *data)
         struct mmc_data *mmcdat = host->data;
 
         if (unlikely(host->dma_ch < 0)) {
-                dev_err(mmc_dev(host->mmc), "DMA callback while DMA not
-                                enabled\n");
+                dev_err(mmc_dev(host->mmc),
+                        "DMA callback while DMA not enabled\n");
                 return;
         }
         /* FIXME: We really should do something to _handle_ the errors */
-        if (ch_status & OMAP_DMA_TOUT_IRQ) {
+        if (ch_status & OMAP1_DMA_TOUT_IRQ) {
                 dev_err(mmc_dev(host->mmc),"DMA timeout\n");
                 return;
         }
@@ -973,20 +972,20 @@ static int __init mmc_omap_probe(struct platform_device *pdev)
         struct omap_mmc_conf *minfo = pdev->dev.platform_data;
         struct mmc_host *mmc;
         struct mmc_omap_host *host = NULL;
+        struct resource *r;
         int ret = 0;
+        int irq;
         
-        if (platform_get_resource(pdev, IORESOURCE_MEM, 0) ||
-                        platform_get_irq(pdev, IORESOURCE_IRQ, 0)) {
-                dev_err(&pdev->dev, "mmc_omap_probe: invalid resource type\n");
-                return -ENODEV;
-        }
+        r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+        irq = platform_get_irq(pdev, 0);
+        if (!r || irq < 0)
+                return -ENXIO;
 
-        if (!request_mem_region(pdev->resource[0].start,
+        r = request_mem_region(pdev->resource[0].start,
                                 pdev->resource[0].end - pdev->resource[0].start + 1,
-                                pdev->name)) {
-                dev_dbg(&pdev->dev, "request_mem_region failed\n");
+                               pdev->name);
+        if (!r)
                 return -EBUSY;
-        }
 
         mmc = mmc_alloc_host(sizeof(struct mmc_omap_host), &pdev->dev);
         if (!mmc) {
@@ -1003,6 +1002,8 @@ static int __init mmc_omap_probe(struct platform_device *pdev)
         host->dma_timer.data = (unsigned long) host;
 
         host->id = pdev->id;
+        host->res = r;
+        host->irq = irq;
 
         if (cpu_is_omap24xx()) {
                 host->iclk = clk_get(&pdev->dev, "mmc_ick");
@@ -1032,13 +1033,9 @@ static int __init mmc_omap_probe(struct platform_device *pdev)
         host->dma_ch = -1;
 
         host->irq = pdev->resource[1].start;
-        host->base = ioremap(pdev->res.start, SZ_4K);
-        if (!host->base) {
-                ret = -ENOMEM;
-                goto out;
-        }
+        host->base = (void __iomem*)IO_ADDRESS(r->start);
 
-         if (minfo->wire4)
+        if (minfo->wire4)
                  mmc->caps |= MMC_CAP_4_BIT_DATA;
 
         mmc->ops = &mmc_omap_ops;
@@ -1057,8 +1054,8 @@ static int __init mmc_omap_probe(struct platform_device *pdev)
 
         if (host->power_pin >= 0) {
                 if ((ret = omap_request_gpio(host->power_pin)) != 0) {
-                        dev_err(mmc_dev(host->mmc), "Unable to get GPIO
-                                        pin for MMC power\n");
+                        dev_err(mmc_dev(host->mmc),
+                                "Unable to get GPIO pin for MMC power\n");
                         goto out;
                 }
                 omap_set_gpio_direction(host->power_pin, 0);
@@ -1100,7 +1097,7 @@ static int __init mmc_omap_probe(struct platform_device *pdev)
                                 device_remove_file(&pdev->dev, &dev_attr_cover_switch);
                 }
                 if (ret) {
-                        dev_wan(mmc_dev(host->mmc), "Unable to create sysfs attributes\n");
+                        dev_warn(mmc_dev(host->mmc), "Unable to create sysfs attributes\n");
                         free_irq(OMAP_GPIO_IRQ(host->switch_pin), host);
                         omap_free_gpio(host->switch_pin);
                         host->switch_pin = -1;
diff --git a/drivers/usb/gadget/omap_udc.c b/drivers/usb/gadget/omap_udc.c
index fbea51448909..36336486c883 100644
--- a/drivers/usb/gadget/omap_udc.c
+++ b/drivers/usb/gadget/omap_udc.c
@@ -773,7 +773,7 @@ static void dma_error(int lch, u16 ch_status, void *data)
         struct omap_ep  *ep = data;
 
         /* if ch_status & OMAP_DMA_DROP_IRQ ... */
-        /* if ch_status & OMAP_DMA_TOUT_IRQ ... */
+        /* if ch_status & OMAP1_DMA_TOUT_IRQ ... */
         ERR("%s dma error, lch %d status %02x\n", ep->ep.name, lch, ch_status);
 
         /* complete current transfer ... */
diff --git a/include/asm-arm/arch-omap/board-fsample.h b/include/asm-arm/arch-omap/board-fsample.h
new file mode 100644
index 000000000000..89a1e529fb6f
--- /dev/null
+++ b/include/asm-arm/arch-omap/board-fsample.h
@@ -0,0 +1,51 @@
+/*
+ * linux/include/asm-arm/arch-omap/board-fsample.h
+ *
+ * Board-specific goodies for TI F-Sample.
+ *
+ * Copyright (C) 2006 Google, Inc.
+ * Author: Brian Swetland <swetland@google.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_OMAP_FSAMPLE_H
+#define __ASM_ARCH_OMAP_FSAMPLE_H
+
+/* fsample is pretty close to p2-sample */
+#include <asm/arch/board-perseus2.h>
+
+#define fsample_cpld_read(reg) __raw_readb(reg)
+#define fsample_cpld_write(val, reg) __raw_writeb(val, reg)
+
+#define FSAMPLE_CPLD_BASE    0xE8100000
+#define FSAMPLE_CPLD_SIZE    SZ_4K
+#define FSAMPLE_CPLD_START   0x05080000
+
+#define FSAMPLE_CPLD_REG_A   (FSAMPLE_CPLD_BASE + 0x00)
+#define FSAMPLE_CPLD_SWITCH  (FSAMPLE_CPLD_BASE + 0x02)
+#define FSAMPLE_CPLD_UART    (FSAMPLE_CPLD_BASE + 0x02)
+#define FSAMPLE_CPLD_REG_B   (FSAMPLE_CPLD_BASE + 0x04)
+#define FSAMPLE_CPLD_VERSION (FSAMPLE_CPLD_BASE + 0x06)
+#define FSAMPLE_CPLD_SET_CLR (FSAMPLE_CPLD_BASE + 0x06)
+
+#define FSAMPLE_CPLD_BIT_BT_RESET         0
+#define FSAMPLE_CPLD_BIT_LCD_RESET        1
+#define FSAMPLE_CPLD_BIT_CAM_PWDN         2
+#define FSAMPLE_CPLD_BIT_CHARGER_ENABLE   3
+#define FSAMPLE_CPLD_BIT_SD_MMC_EN        4
+#define FSAMPLE_CPLD_BIT_aGPS_PWREN       5
+#define FSAMPLE_CPLD_BIT_BACKLIGHT        6
+#define FSAMPLE_CPLD_BIT_aGPS_EN_RESET    7
+#define FSAMPLE_CPLD_BIT_aGPS_SLEEPx_N    8
+#define FSAMPLE_CPLD_BIT_OTG_RESET        9
+
+#define fsample_cpld_set(bit) \
+    fsample_cpld_write((((bit) & 15) << 4) | 0x0f, FSAMPLE_CPLD_SET_CLR)
+
+#define fsample_cpld_clear(bit) \
+    fsample_cpld_write(0xf0 | ((bit) & 15), FSAMPLE_CPLD_SET_CLR)
+
+#endif
diff --git a/include/asm-arm/arch-omap/board.h b/include/asm-arm/arch-omap/board.h
index dfdbf06fd646..edf1dc6ad919 100644
--- a/include/asm-arm/arch-omap/board.h
+++ b/include/asm-arm/arch-omap/board.h
@@ -22,6 +22,7 @@
 #define OMAP_TAG_UART           0x4f07
 #define OMAP_TAG_FBMEM          0x4f08
 #define OMAP_TAG_STI_CONSOLE    0x4f09
+#define OMAP_TAG_CAMERA_SENSOR  0x4f0a
 
 #define OMAP_TAG_BOOT_REASON    0x4f80
 #define OMAP_TAG_FLASH_PART     0x4f81
@@ -61,6 +62,12 @@ struct omap_sti_console_config {
         u8 channel;
 };
 
+struct omap_camera_sensor_config {
+        u16 reset_gpio;
+        int (*power_on)(void * data);
+        int (*power_off)(void * data);
+};
+
 struct omap_usb_config {
         /* Configure drivers according to the connectors on your board:
          *  - "A" connector (rectagular)
diff --git a/include/asm-arm/arch-omap/dma.h b/include/asm-arm/arch-omap/dma.h
index ca1202312a45..1b1b02307e77 100644
--- a/include/asm-arm/arch-omap/dma.h
+++ b/include/asm-arm/arch-omap/dma.h
@@ -185,8 +185,8 @@
 /* DMA channels for 24xx */
 #define OMAP24XX_DMA_NO_DEVICE          0
 #define OMAP24XX_DMA_XTI_DMA            1       /* S_DMA_0 */
-#define OMAP24XX_DMA_EXT_NDMA_REQ0      2       /* S_DMA_1 */
-#define OMAP24XX_DMA_EXT_NDMA_REQ1      3       /* S_DMA_2 */
+#define OMAP24XX_DMA_EXT_DMAREQ0        2       /* S_DMA_1 */
+#define OMAP24XX_DMA_EXT_DMAREQ1        3       /* S_DMA_2 */
 #define OMAP24XX_DMA_GPMC               4       /* S_DMA_3 */
 #define OMAP24XX_DMA_GFX                5       /* S_DMA_4 */
 #define OMAP24XX_DMA_DSS                6       /* S_DMA_5 */
@@ -197,7 +197,9 @@
 #define OMAP24XX_DMA_DES_TX             11      /* S_DMA_10 */
 #define OMAP24XX_DMA_DES_RX             12      /* S_DMA_11 */
 #define OMAP24XX_DMA_SHA1MD5_RX         13      /* S_DMA_12 */
-
+#define OMAP24XX_DMA_EXT_DMAREQ2        14      /* S_DMA_13 */
+#define OMAP24XX_DMA_EXT_DMAREQ3        15      /* S_DMA_14 */
+#define OMAP24XX_DMA_EXT_DMAREQ4        16      /* S_DMA_15 */
 #define OMAP24XX_DMA_EAC_AC_RD          17      /* S_DMA_16 */
 #define OMAP24XX_DMA_EAC_AC_WR          18      /* S_DMA_17 */
 #define OMAP24XX_DMA_EAC_MD_UL_RD       19      /* S_DMA_18 */
@@ -244,6 +246,7 @@
 #define OMAP24XX_DMA_MMC1_TX            61      /* SDMA_60 */
 #define OMAP24XX_DMA_MMC1_RX            62      /* SDMA_61 */
 #define OMAP24XX_DMA_MS                 63      /* SDMA_62 */
+#define OMAP24XX_DMA_EXT_DMAREQ5        64      /* S_DMA_63 */
 
 /*----------------------------------------------------------------------------*/
 
@@ -274,7 +277,7 @@
 #define OMAP1610_DMA_LCD_LCH_CTRL       (OMAP1610_DMA_LCD_BASE + 0xea)
 #define OMAP1610_DMA_LCD_SRC_FI_B1_U    (OMAP1610_DMA_LCD_BASE + 0xf4)
 
-#define OMAP_DMA_TOUT_IRQ               (1 << 0)        /* Only on omap1 */
+#define OMAP1_DMA_TOUT_IRQ              (1 << 0)
 #define OMAP_DMA_DROP_IRQ               (1 << 1)
 #define OMAP_DMA_HALF_IRQ               (1 << 2)
 #define OMAP_DMA_FRAME_IRQ              (1 << 3)
@@ -315,11 +318,11 @@ enum {
         OMAP_LCD_DMA_B2_BOTTOM
 };
 
-/* REVISIT: Check if BURST_4 is really 1 (or 2) */
 enum omap_dma_burst_mode {
         OMAP_DMA_DATA_BURST_DIS = 0,
         OMAP_DMA_DATA_BURST_4,
-        OMAP_DMA_DATA_BURST_8
+        OMAP_DMA_DATA_BURST_8,
+        OMAP_DMA_DATA_BURST_16,
 };
 
 enum omap_dma_color_mode {
diff --git a/include/asm-arm/arch-omap/dmtimer.h b/include/asm-arm/arch-omap/dmtimer.h
index e6522e6a3834..7a289ff07404 100644
--- a/include/asm-arm/arch-omap/dmtimer.h
+++ b/include/asm-arm/arch-omap/dmtimer.h
@@ -5,6 +5,7 @@
  *
  * Copyright (C) 2005 Nokia Corporation
  * Author: Lauri Leukkunen <lauri.leukkunen@nokia.com>
+ * PWM and clock framwork support by Timo Teras.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License as published by the
@@ -25,69 +26,56 @@
  * 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
-#ifndef __ASM_ARCH_TIMER_H
-#define __ASM_ARCH_TIMER_H
-
-#include <linux/list.h>
-
-#define OMAP_TIMER_SRC_ARMXOR           0x00
-#define OMAP_TIMER_SRC_32_KHZ           0x01
-#define OMAP_TIMER_SRC_EXT_CLK          0x02
-
-/* timer control reg bits */
-#define OMAP_TIMER_CTRL_CAPTMODE        (1 << 13)
-#define OMAP_TIMER_CTRL_PT              (1 << 12)
-#define OMAP_TIMER_CTRL_TRG_OVERFLOW    (0x1 << 10)
-#define OMAP_TIMER_CTRL_TRG_OFANDMATCH  (0x2 << 10)
-#define OMAP_TIMER_CTRL_TCM_LOWTOHIGH   (0x1 << 8)
-#define OMAP_TIMER_CTRL_TCM_HIGHTOLOW   (0x2 << 8)
-#define OMAP_TIMER_CTRL_TCM_BOTHEDGES   (0x3 << 8)
-#define OMAP_TIMER_CTRL_SCPWM           (1 << 7)
-#define OMAP_TIMER_CTRL_CE              (1 << 6)        /* compare enable */
-#define OMAP_TIMER_CTRL_PRE             (1 << 5)        /* prescaler enable */
-#define OMAP_TIMER_CTRL_PTV_SHIFT       2               /* how much to shift the prescaler value */
-#define OMAP_TIMER_CTRL_AR              (1 << 1)        /* auto-reload enable */
-#define OMAP_TIMER_CTRL_ST              (1 << 0)        /* start timer */
+#ifndef __ASM_ARCH_DMTIMER_H
+#define __ASM_ARCH_DMTIMER_H
 
-/* timer interrupt enable bits */
-#define OMAP_TIMER_INT_CAPTURE          (1 << 2)
-#define OMAP_TIMER_INT_OVERFLOW         (1 << 1)
-#define OMAP_TIMER_INT_MATCH            (1 << 0)
+/* clock sources */
+#define OMAP_TIMER_SRC_SYS_CLK                  0x00
+#define OMAP_TIMER_SRC_32_KHZ                   0x01
+#define OMAP_TIMER_SRC_EXT_CLK                  0x02
 
+/* timer interrupt enable bits */
+#define OMAP_TIMER_INT_CAPTURE                  (1 << 2)
+#define OMAP_TIMER_INT_OVERFLOW                 (1 << 1)
+#define OMAP_TIMER_INT_MATCH                    (1 << 0)
 
-struct omap_dm_timer {
-        struct list_head timer_list;
+/* trigger types */
+#define OMAP_TIMER_TRIGGER_NONE                 0x00
+#define OMAP_TIMER_TRIGGER_OVERFLOW             0x01
+#define OMAP_TIMER_TRIGGER_OVERFLOW_AND_COMPARE 0x02
 
-        u32 base;
-        unsigned int irq;
-};
+struct omap_dm_timer;
+struct clk;
 
-u32 omap_dm_timer_read_reg(struct omap_dm_timer *timer, int reg);
-void omap_dm_timer_write_reg(struct omap_dm_timer *timer, int reg, u32 value);
+int omap_dm_timer_init(void);
 
-struct omap_dm_timer * omap_dm_timer_request(void);
+struct omap_dm_timer *omap_dm_timer_request(void);
+struct omap_dm_timer *omap_dm_timer_request_specific(int timer_id);
 void omap_dm_timer_free(struct omap_dm_timer *timer);
-void omap_dm_timer_set_source(struct omap_dm_timer *timer, int source);
 
-void omap_dm_timer_set_int_enable(struct omap_dm_timer *timer, unsigned int value);
-void omap_dm_timer_set_trigger(struct omap_dm_timer *timer, unsigned int value);
-void omap_dm_timer_enable_compare(struct omap_dm_timer *timer);
-void omap_dm_timer_enable_autoreload(struct omap_dm_timer *timer);
+int omap_dm_timer_get_irq(struct omap_dm_timer *timer);
+
+u32 omap_dm_timer_modify_idlect_mask(u32 inputmask);
+struct clk *omap_dm_timer_get_fclk(struct omap_dm_timer *timer);
 
 void omap_dm_timer_trigger(struct omap_dm_timer *timer);
 void omap_dm_timer_start(struct omap_dm_timer *timer);
 void omap_dm_timer_stop(struct omap_dm_timer *timer);
 
-void omap_dm_timer_set_load(struct omap_dm_timer *timer, unsigned int load);
-void omap_dm_timer_set_match(struct omap_dm_timer *timer, unsigned int match);
+void omap_dm_timer_set_source(struct omap_dm_timer *timer, int source);
+void omap_dm_timer_set_load(struct omap_dm_timer *timer, int autoreload, unsigned int value);
+void omap_dm_timer_set_match(struct omap_dm_timer *timer, int enable, unsigned int match);
+void omap_dm_timer_set_pwm(struct omap_dm_timer *timer, int def_on, int toggle, int trigger);
+void omap_dm_timer_set_prescaler(struct omap_dm_timer *timer, int prescaler);
+
+void omap_dm_timer_set_int_enable(struct omap_dm_timer *timer, unsigned int value);
 
 unsigned int omap_dm_timer_read_status(struct omap_dm_timer *timer);
 void omap_dm_timer_write_status(struct omap_dm_timer *timer, unsigned int value);
-
 unsigned int omap_dm_timer_read_counter(struct omap_dm_timer *timer);
-void omap_dm_timer_reset_counter(struct omap_dm_timer *timer);
+void omap_dm_timer_write_counter(struct omap_dm_timer *timer, unsigned int value);
 
 int omap_dm_timers_active(void);
-u32 omap_dm_timer_modify_idlect_mask(u32 inputmask);
 
-#endif /* __ASM_ARCH_TIMER_H */
+
+#endif /* __ASM_ARCH_DMTIMER_H */
diff --git a/include/asm-arm/arch-omap/gpmc.h b/include/asm-arm/arch-omap/gpmc.h
new file mode 100644
index 000000000000..1a0a5207822d
--- /dev/null
+++ b/include/asm-arm/arch-omap/gpmc.h
@@ -0,0 +1,91 @@
+/*
+ * General-Purpose Memory Controller for OMAP2
+ *
+ * Copyright (C) 2005-2006 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __OMAP2_GPMC_H
+#define __OMAP2_GPMC_H
+
+#define GPMC_CS_CONFIG1         0x00
+#define GPMC_CS_CONFIG2         0x04
+#define GPMC_CS_CONFIG3         0x08
+#define GPMC_CS_CONFIG4         0x0c
+#define GPMC_CS_CONFIG5         0x10
+#define GPMC_CS_CONFIG6         0x14
+#define GPMC_CS_CONFIG7         0x18
+#define GPMC_CS_NAND_COMMAND    0x1c
+#define GPMC_CS_NAND_ADDRESS    0x20
+#define GPMC_CS_NAND_DATA       0x24
+
+#define GPMC_CONFIG1_WRAPBURST_SUPP     (1 << 31)
+#define GPMC_CONFIG1_READMULTIPLE_SUPP  (1 << 20)
+#define GPMC_CONFIG1_READTYPE_ASYNC     (0 << 29)
+#define GPMC_CONFIG1_READTYPE_SYNC      (1 << 29)
+#define GPMC_CONFIG1_WRITETYPE_ASYNC    (0 << 27)
+#define GPMC_CONFIG1_WRITETYPE_SYNC     (1 << 27)
+#define GPMC_CONFIG1_CLKACTIVATIONTIME(val) ((val & 3) << 25)
+#define GPMC_CONFIG1_PAGE_LEN(val)      ((val & 3) << 23)
+#define GPMC_CONFIG1_WAIT_READ_MON      (1 << 22)
+#define GPMC_CONFIG1_WAIT_WRITE_MON     (1 << 21)
+#define GPMC_CONFIG1_WAIT_MON_IIME(val) ((val & 3) << 18)
+#define GPMC_CONFIG1_WAIT_PIN_SEL(val)  ((val & 3) << 16)
+#define GPMC_CONFIG1_DEVICESIZE(val)    ((val & 3) << 12)
+#define GPMC_CONFIG1_DEVICESIZE_16      GPMC_CONFIG1_DEVICESIZE(1)
+#define GPMC_CONFIG1_DEVICETYPE(val)    ((val & 3) << 10)
+#define GPMC_CONFIG1_DEVICETYPE_NOR     GPMC_CONFIG1_DEVICETYPE(0)
+#define GPMC_CONFIG1_DEVICETYPE_NAND    GPMC_CONFIG1_DEVICETYPE(1)
+#define GPMC_CONFIG1_MUXADDDATA         (1 << 9)
+#define GPMC_CONFIG1_TIME_PARA_GRAN     (1 << 4)
+#define GPMC_CONFIG1_FCLK_DIV(val)      (val & 3)
+#define GPMC_CONFIG1_FCLK_DIV2          (GPMC_CONFIG1_FCLK_DIV(1))
+#define GPMC_CONFIG1_FCLK_DIV3          (GPMC_CONFIG1_FCLK_DIV(2))
+#define GPMC_CONFIG1_FCLK_DIV4          (GPMC_CONFIG1_FCLK_DIV(3))
+
+/*
+ * Note that all values in this struct are in nanoseconds, while
+ * the register values are in gpmc_fck cycles.
+ */
+struct gpmc_timings {
+        /* Minimum clock period for synchronous mode */
+        u16 sync_clk;
+
+        /* Chip-select signal timings corresponding to GPMC_CS_CONFIG2 */
+        u16 cs_on;              /* Assertion time */
+        u16 cs_rd_off;          /* Read deassertion time */
+        u16 cs_wr_off;          /* Write deassertion time */
+
+        /* ADV signal timings corresponding to GPMC_CONFIG3 */
+        u16 adv_on;             /* Assertion time */
+        u16 adv_rd_off;         /* Read deassertion time */
+        u16 adv_wr_off;         /* Write deassertion time */
+
+        /* WE signals timings corresponding to GPMC_CONFIG4 */
+        u16 we_on;              /* WE assertion time */
+        u16 we_off;             /* WE deassertion time */
+
+        /* OE signals timings corresponding to GPMC_CONFIG4 */
+        u16 oe_on;              /* OE assertion time */
+        u16 oe_off;             /* OE deassertion time */
+
+        /* Access time and cycle time timings corresponding to GPMC_CONFIG5 */
+        u16 page_burst_access;  /* Multiple access word delay */
+        u16 access;             /* Start-cycle to first data valid delay */
+        u16 rd_cycle;           /* Total read cycle time */
+        u16 wr_cycle;           /* Total write cycle time */
+};
+
+extern unsigned int gpmc_ns_to_ticks(unsigned int time_ns);
+
+extern void gpmc_cs_write_reg(int cs, int idx, u32 val);
+extern u32 gpmc_cs_read_reg(int cs, int idx);
+extern int gpmc_cs_calc_divider(int cs, unsigned int sync_clk);
+extern int gpmc_cs_set_timings(int cs, const struct gpmc_timings *t);
+extern unsigned long gpmc_cs_get_base_addr(int cs);
+
+
+#endif
diff --git a/include/asm-arm/arch-omap/hardware.h b/include/asm-arm/arch-omap/hardware.h
index c7d9e857795d..481048d65214 100644
--- a/include/asm-arm/arch-omap/hardware.h
+++ b/include/asm-arm/arch-omap/hardware.h
@@ -297,6 +297,10 @@
 #include "board-perseus2.h"
 #endif
 
+#ifdef CONFIG_MACH_OMAP_FSAMPLE
+#include "board-fsample.h"
+#endif
+
 #ifdef CONFIG_MACH_OMAP_H3
 #include "board-h3.h"
 #endif
diff --git a/include/asm-arm/arch-omap/irqs.h b/include/asm-arm/arch-omap/irqs.h
index 42098d99f302..2542495d8a43 100644
--- a/include/asm-arm/arch-omap/irqs.h
+++ b/include/asm-arm/arch-omap/irqs.h
@@ -242,10 +242,24 @@
 #define INT_24XX_GPIO_BANK2     30
 #define INT_24XX_GPIO_BANK3     31
 #define INT_24XX_GPIO_BANK4     32
+#define INT_24XX_GPTIMER1       37
+#define INT_24XX_GPTIMER2       38
+#define INT_24XX_GPTIMER3       39
+#define INT_24XX_GPTIMER4       40
+#define INT_24XX_GPTIMER5       41
+#define INT_24XX_GPTIMER6       42
+#define INT_24XX_GPTIMER7       43
+#define INT_24XX_GPTIMER8       44
+#define INT_24XX_GPTIMER9       45
+#define INT_24XX_GPTIMER10      46
+#define INT_24XX_GPTIMER11      47
+#define INT_24XX_GPTIMER12      48
 #define INT_24XX_MCBSP1_IRQ_TX  59
 #define INT_24XX_MCBSP1_IRQ_RX  60
 #define INT_24XX_MCBSP2_IRQ_TX  62
 #define INT_24XX_MCBSP2_IRQ_RX  63
+#define INT_24XX_UART1_IRQ      72
+#define INT_24XX_UART2_IRQ      73
 #define INT_24XX_UART3_IRQ      74
 
 /* Max. 128 level 2 IRQs (OMAP1610), 192 GPIOs (OMAP730) and
diff --git a/include/asm-arm/arch-omap/mux.h b/include/asm-arm/arch-omap/mux.h
index 0dc24d4ba59c..679869c5e68f 100644
--- a/include/asm-arm/arch-omap/mux.h
+++ b/include/asm-arm/arch-omap/mux.h
@@ -410,6 +410,12 @@ enum omap24xx_index {
         /* 24xx clock */
         W14_24XX_SYS_CLKOUT,
 
+        /* 24xx GPMC wait pin monitoring */
+        L3_GPMC_WAIT0,
+        N7_GPMC_WAIT1,
+        M1_GPMC_WAIT2,
+        P1_GPMC_WAIT3,
+
         /* 242X McBSP */
         Y15_24XX_MCBSP2_CLKX,
         R14_24XX_MCBSP2_FSX,
@@ -429,6 +435,26 @@ enum omap24xx_index {
         M15_24XX_GPIO92,
         V14_24XX_GPIO117,
 
+        /* 242x DBG GPIO */
+        V4_242X_GPIO49,
+        W2_242X_GPIO50,
+        U4_242X_GPIO51,
+        V3_242X_GPIO52,
+        V2_242X_GPIO53,
+        V6_242X_GPIO53,
+        T4_242X_GPIO54,
+        Y4_242X_GPIO54,
+        T3_242X_GPIO55,
+        U2_242X_GPIO56,
+
+        /* 24xx external DMA requests */
+        AA10_242X_DMAREQ0,
+        AA6_242X_DMAREQ1,
+        E4_242X_DMAREQ2,
+        G4_242X_DMAREQ3,
+        D3_242X_DMAREQ4,
+        E3_242X_DMAREQ5,
+
         P20_24XX_TSC_IRQ,
 
         /* UART3 */
diff --git a/include/asm-arm/arch-omap/pm.h b/include/asm-arm/arch-omap/pm.h
index 05b003f3a94c..e46623c61a72 100644
--- a/include/asm-arm/arch-omap/pm.h
+++ b/include/asm-arm/arch-omap/pm.h
@@ -299,10 +299,43 @@ enum omap24xx_save_state {
         OMAP24XX_SLEEP_SAVE_INTC_MIR0,
         OMAP24XX_SLEEP_SAVE_INTC_MIR1,
         OMAP24XX_SLEEP_SAVE_INTC_MIR2,
+
+        OMAP24XX_SLEEP_SAVE_CM_CLKSTCTRL_MPU,
+        OMAP24XX_SLEEP_SAVE_CM_CLKSTCTRL_CORE,
+        OMAP24XX_SLEEP_SAVE_CM_CLKSTCTRL_GFX,
+        OMAP24XX_SLEEP_SAVE_CM_CLKSTCTRL_DSP,
+        OMAP24XX_SLEEP_SAVE_CM_CLKSTCTRL_MDM,
+
+        OMAP24XX_SLEEP_SAVE_PM_PWSTCTRL_MPU,
+        OMAP24XX_SLEEP_SAVE_PM_PWSTCTRL_CORE,
+        OMAP24XX_SLEEP_SAVE_PM_PWSTCTRL_GFX,
+        OMAP24XX_SLEEP_SAVE_PM_PWSTCTRL_DSP,
+        OMAP24XX_SLEEP_SAVE_PM_PWSTCTRL_MDM,
+
+        OMAP24XX_SLEEP_SAVE_CM_IDLEST1_CORE,
+        OMAP24XX_SLEEP_SAVE_CM_IDLEST2_CORE,
+        OMAP24XX_SLEEP_SAVE_CM_IDLEST3_CORE,
+        OMAP24XX_SLEEP_SAVE_CM_IDLEST4_CORE,
+        OMAP24XX_SLEEP_SAVE_CM_IDLEST_GFX,
+        OMAP24XX_SLEEP_SAVE_CM_IDLEST_WKUP,
+        OMAP24XX_SLEEP_SAVE_CM_IDLEST_CKGEN,
+        OMAP24XX_SLEEP_SAVE_CM_IDLEST_DSP,
+        OMAP24XX_SLEEP_SAVE_CM_IDLEST_MDM,
+
+        OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE1_CORE,
+        OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE2_CORE,
+        OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE3_CORE,
+        OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE4_CORE,
+        OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE_WKUP,
+        OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE_PLL,
+        OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE_DSP,
+        OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE_MDM,
+
         OMAP24XX_SLEEP_SAVE_CM_FCLKEN1_CORE,
         OMAP24XX_SLEEP_SAVE_CM_FCLKEN2_CORE,
         OMAP24XX_SLEEP_SAVE_CM_ICLKEN1_CORE,
         OMAP24XX_SLEEP_SAVE_CM_ICLKEN2_CORE,
+        OMAP24XX_SLEEP_SAVE_CM_ICLKEN3_CORE,
         OMAP24XX_SLEEP_SAVE_CM_ICLKEN4_CORE,
         OMAP24XX_SLEEP_SAVE_GPIO1_IRQENABLE1,
         OMAP24XX_SLEEP_SAVE_GPIO2_IRQENABLE1,
diff --git a/include/asm-arm/arch-pxa/pxa-regs.h b/include/asm-arm/arch-pxa/pxa-regs.h
index 9f83f4adfbf3..f5cc65dd7d0d 100644
--- a/include/asm-arm/arch-pxa/pxa-regs.h
+++ b/include/asm-arm/arch-pxa/pxa-regs.h
@@ -1329,6 +1329,7 @@
 #define GPIO84_NSRXD            84      /* NSSP receive */
 #define GPIO85_nPCE_1           85      /* Card Enable for Card Space (PXA27x) */
 #define GPIO92_MMCDAT0          92      /* MMC DAT0 (PXA27x) */
+#define GPIO102_nPCE_1          102     /* PCMCIA (PXA27x) */
 #define GPIO109_MMCDAT1         109     /* MMC DAT1 (PXA27x) */
 #define GPIO110_MMCDAT2         110     /* MMC DAT2 (PXA27x) */
 #define GPIO110_MMCCS0          110     /* MMC Chip Select 0 (PXA27x) */
@@ -1471,6 +1472,7 @@
 #define GPIO84_NSSP_RX          (84 | GPIO_ALT_FN_2_IN)
 #define GPIO85_nPCE_1_MD        (85 | GPIO_ALT_FN_1_OUT)
 #define GPIO92_MMCDAT0_MD       (92 | GPIO_ALT_FN_1_OUT)
+#define GPIO102_nPCE_1_MD       (102 | GPIO_ALT_FN_1_OUT)
 #define GPIO104_pSKTSEL_MD      (104 | GPIO_ALT_FN_1_OUT)
 #define GPIO109_MMCDAT1_MD      (109 | GPIO_ALT_FN_1_OUT)
 #define GPIO110_MMCDAT2_MD      (110 | GPIO_ALT_FN_1_OUT)
diff --git a/include/asm-arm/arch-pxa/trizeps4.h b/include/asm-arm/arch-pxa/trizeps4.h
new file mode 100644
index 000000000000..641d0ec110bb
--- /dev/null
+++ b/include/asm-arm/arch-pxa/trizeps4.h
@@ -0,0 +1,106 @@
+/************************************************************************
+ * Include file for TRIZEPS4 SoM and ConXS eval-board
+ * Copyright (c) Jürgen Schindele
+ * 2006
+ ************************************************************************/
+
+/*
+ * Includes/Defines
+ */
+#ifndef _TRIPEPS4_H_
+#define _TRIPEPS4_H_
+
+/* physical memory regions */
+#define TRIZEPS4_FLASH_PHYS     (PXA_CS0_PHYS)  /* Flash region */
+#define TRIZEPS4_DISK_PHYS      (PXA_CS1_PHYS)  /* Disk On Chip region */
+#define TRIZEPS4_ETH_PHYS       (PXA_CS2_PHYS)  /* Ethernet DM9000 region */
+#define TRIZEPS4_PIC_PHYS       (PXA_CS3_PHYS)  /* Logic chip on ConXS-Board */
+#define TRIZEPS4_SDRAM_BASE     0xa0000000      /* SDRAM region */
+
+#define TRIZEPS4_CFSR_PHYS      (PXA_CS3_PHYS)                  /* Logic chip on ConXS-Board CSFR register */
+#define TRIZEPS4_BOCR_PHYS      (PXA_CS3_PHYS+0x02000000)       /* Logic chip on ConXS-Board BOCR register */
+#define TRIZEPS4_IRCR_PHYS      (PXA_CS3_PHYS+0x02400000)       /* Logic chip on ConXS-Board IRCR register*/
+#define TRIZEPS4_UPSR_PHYS      (PXA_CS3_PHYS+0x02800000)       /* Logic chip on ConXS-Board UPSR register*/
+#define TRIZEPS4_DICR_PHYS      (PXA_CS3_PHYS+0x03800000)       /* Logic chip on ConXS-Board DICR register*/
+
+/* virtual memory regions */
+#define TRIZEPS4_DISK_VIRT      0xF0000000      /* Disk On Chip region */
+
+#define TRIZEPS4_PIC_VIRT       0xF0100000      /* not used */
+#define TRIZEPS4_CFSR_VIRT      0xF0100000
+#define TRIZEPS4_BOCR_VIRT      0xF0200000
+#define TRIZEPS4_DICR_VIRT      0xF0300000
+#define TRIZEPS4_IRCR_VIRT      0xF0400000
+#define TRIZEPS4_UPSR_VIRT      0xF0500000
+
+/* size of flash */
+#define TRIZEPS4_FLASH_SIZE     0x02000000      /* Flash size 32 MB */
+
+/* Ethernet Controller Davicom DM9000 */
+#define GPIO_DM9000             101
+#define TRIZEPS4_ETH_IRQ        IRQ_GPIO(GPIO_DM9000)
+
+/* UCB1400 audio / TS-controller */
+#define GPIO_UCB1400            1
+#define TRIZEPS4_UCB1400_IRQ    IRQ_GPIO(GPIO_UCB1400)
+
+/* PCMCIA socket Compact Flash */
+#define GPIO_PCD                11              /* PCMCIA Card Detect */
+#define TRIZEPS4_CD_IRQ         IRQ_GPIO(GPIO_PCD)
+#define GPIO_PRDY               13              /* READY / nINT */
+#define TRIZEPS4_READY_NINT     IRQ_GPIO(GPIO_PRDY)
+
+/* MMC socket */
+#define GPIO_MMC_DET            12
+#define TRIZEPS4_MMC_IRQ        IRQ_GPIO(GPIO_MMC_DET)
+
+/* LEDS using tx2 / rx2 */
+#define GPIO_SYS_BUSY_LED       46
+#define GPIO_HEARTBEAT_LED      47
+
+/* Off-module PIC on ConXS board */
+#define GPIO_PIC                0
+#define TRIZEPS4_PIC_IRQ        IRQ_GPIO(GPIO_PIC)
+
+#define CFSR_P2V(x)             ((x) - TRIZEPS4_CFSR_PHYS + TRIZEPS4_CFSR_VIRT)
+#define CFSR_V2P(x)             ((x) - TRIZEPS4_CFSR_VIRT + TRIZEPS4_CFSR_PHYS)
+
+#define BCR_P2V(x)              ((x) - TRIZEPS4_BOCR_PHYS + TRIZEPS4_BOCR_VIRT)
+#define BCR_V2P(x)              ((x) - TRIZEPS4_BOCR_VIRT + TRIZEPS4_BOCR_PHYS)
+
+#define DCR_P2V(x)              ((x) - TRIZEPS4_DICR_PHYS + TRIZEPS4_DICR_VIRT)
+#define DCR_V2P(x)              ((x) - TRIZEPS4_DICR_VIRT + TRIZEPS4_DICR_PHYS)
+
+#ifndef __ASSEMBLY__
+#define ConXS_CFSR              (*((volatile unsigned short *)CFSR_P2V(0x0C000000)))
+#define ConXS_BCR               (*((volatile unsigned short *)BCR_P2V(0x0E000000)))
+#define ConXS_DCR               (*((volatile unsigned short *)DCR_P2V(0x0F800000)))
+#else
+#define ConXS_CFSR              CFSR_P2V(0x0C000000)
+#define ConXS_BCR               BCR_P2V(0x0E000000)
+#define ConXS_DCR               DCR_P2V(0x0F800000)
+#endif
+
+#define ConXS_CFSR_BVD_MASK     0x0003
+#define ConXS_CFSR_BVD1         (1 << 0)
+#define ConXS_CFSR_BVD2         (1 << 1)
+#define ConXS_CFSR_VS_MASK      0x000C
+#define ConXS_CFSR_VS1          (1 << 2)
+#define ConXS_CFSR_VS2          (1 << 3)
+#define ConXS_CFSR_VS_5V        (0x3 << 2)
+#define ConXS_CFSR_VS_3V3       0x0
+
+#define ConXS_BCR_S0_POW_EN0    (1 << 0)
+#define ConXS_BCR_S0_POW_EN1    (1 << 1)
+#define ConXS_BCR_L_DISP        (1 << 4)
+#define ConXS_BCR_CF_BUF_EN     (1 << 5)
+#define ConXS_BCR_CF_RESET      (1 << 7)
+#define ConXS_BCR_S0_VCC_3V3    0x1
+#define ConXS_BCR_S0_VCC_5V0    0x2
+#define ConXS_BCR_S0_VPP_12V    0x4
+#define ConXS_BCR_S0_VPP_3V3    0x8
+
+#define ConXS_IRCR_MODE         (1 << 0)
+#define ConXS_IRCR_SD           (1 << 1)
+
+#endif /* _TRIPEPS4_H_ */
diff --git a/include/asm-arm/memory.h b/include/asm-arm/memory.h
index 94f973b704f1..91d536c215d7 100644
--- a/include/asm-arm/memory.h
+++ b/include/asm-arm/memory.h
@@ -68,6 +68,11 @@
  */
 #define XIP_VIRT_ADDR(physaddr)  (MODULE_START + ((physaddr) & 0x000fffff))
 
+/*
+ * Allow 16MB-aligned ioremap pages
+ */
+#define IOREMAP_MAX_ORDER       24
+
 #else /* CONFIG_MMU */
 
 /*
diff --git a/include/asm-arm/mmu.h b/include/asm-arm/mmu.h
index 23dde52e0945..fe2a23b5627b 100644
--- a/include/asm-arm/mmu.h
+++ b/include/asm-arm/mmu.h
@@ -7,6 +7,7 @@ typedef struct {
 #if __LINUX_ARM_ARCH__ >= 6
         unsigned int id;
 #endif
+        unsigned int kvm_seq;
 } mm_context_t;
 
 #if __LINUX_ARM_ARCH__ >= 6
diff --git a/include/asm-arm/mmu_context.h b/include/asm-arm/mmu_context.h
index 9fadb01e030d..d1a65b1edcaa 100644
--- a/include/asm-arm/mmu_context.h
+++ b/include/asm-arm/mmu_context.h
@@ -17,6 +17,8 @@
 #include <asm/cacheflush.h>
 #include <asm/proc-fns.h>
 
+void __check_kvm_seq(struct mm_struct *mm);
+
 #if __LINUX_ARM_ARCH__ >= 6
 
 /*
@@ -45,13 +47,21 @@ static inline void check_context(struct mm_struct *mm)
 {
         if (unlikely((mm->context.id ^ cpu_last_asid) >> ASID_BITS))
                 __new_context(mm);
+
+        if (unlikely(mm->context.kvm_seq != init_mm.context.kvm_seq))
+                __check_kvm_seq(mm);
 }
 
 #define init_new_context(tsk,mm)        (__init_new_context(tsk,mm),0)
 
 #else
 
-#define check_context(mm)               do { } while (0)
+static inline void check_context(struct mm_struct *mm)
+{
+        if (unlikely(mm->context.kvm_seq != init_mm.context.kvm_seq))
+                __check_kvm_seq(mm);
+}
+
 #define init_new_context(tsk,mm)        0
 
 #endif
diff --git a/include/asm-arm/pgtable-hwdef.h b/include/asm-arm/pgtable-hwdef.h
index 1bc1f997bda2..f3b5120c99fe 100644
--- a/include/asm-arm/pgtable-hwdef.h
+++ b/include/asm-arm/pgtable-hwdef.h
@@ -28,6 +28,7 @@
  */
 #define PMD_SECT_BUFFERABLE     (1 << 2)
 #define PMD_SECT_CACHEABLE      (1 << 3)
+#define PMD_SECT_XN             (1 << 4)        /* v6 */
 #define PMD_SECT_AP_WRITE       (1 << 10)
 #define PMD_SECT_AP_READ        (1 << 11)
 #define PMD_SECT_TEX(x)         ((x) << 12)     /* v5 */
diff --git a/include/asm-arm/procinfo.h b/include/asm-arm/procinfo.h
index 842526055225..edb7b6502fcf 100644
--- a/include/asm-arm/procinfo.h
+++ b/include/asm-arm/procinfo.h
@@ -29,7 +29,8 @@ struct processor;
 struct proc_info_list {
         unsigned int            cpu_val;
         unsigned int            cpu_mask;
-        unsigned long           __cpu_mmu_flags;        /* used by head.S */
+        unsigned long           __cpu_mm_mmu_flags;     /* used by head.S */
+        unsigned long           __cpu_io_mmu_flags;     /* used by head.S */
         unsigned long           __cpu_flush;            /* used by head.S */
         const char              *arch_name;
         const char              *elf_name;
diff --git a/include/asm-arm/thread_info.h b/include/asm-arm/thread_info.h
index c46b5c84275f..c52e0bf75353 100644
--- a/include/asm-arm/thread_info.h
+++ b/include/asm-arm/thread_info.h
@@ -111,6 +111,7 @@ extern void iwmmxt_task_disable(struct thread_info *);
 extern void iwmmxt_task_copy(struct thread_info *, void *);
 extern void iwmmxt_task_restore(struct thread_info *, void *);
 extern void iwmmxt_task_release(struct thread_info *);
+extern void iwmmxt_task_switch(struct thread_info *);
 
 #endif