128 files changed, 1526 insertions, 908 deletions

diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index ee287988934e..9d3a0775a11d 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -55,14 +55,6 @@ Who:	Mauro Carvalho Chehab <mchehab@brturbo.com.br>
 
 ---------------------------
 
-What:   remove EXPORT_SYMBOL(insert_resource)
-When:   April 2006
-Files:  kernel/resource.c
-Why:    No modular usage in the kernel.
-Who:    Adrian Bunk <bunk@stusta.de>
-
----------------------------
-
 What:   PCMCIA control ioctl (needed for pcmcia-cs [cardmgr, cardctl])
 When:   November 2005
 Files:  drivers/pcmcia/: pcmcia_ioctl.c
@@ -255,3 +247,14 @@ Why:	The interrupt related SA_* flags are replaced by IRQF_* to move them
 Who:    Thomas Gleixner <tglx@linutronix.de>
 
 ---------------------------
+
+What:   i2c-ite and i2c-algo-ite drivers
+When:   September 2006
+Why:    These drivers never compiled since they were added to the kernel
+        tree 5 years ago. This feature removal can be reevaluated if
+        someone shows interest in the drivers, fixes them and takes over
+        maintenance.
+        http://marc.theaimsgroup.com/?l=linux-mips&m=115040510817448
+Who:    Jean Delvare <khali@linux-fr.org>
+
+---------------------------
diff --git a/Documentation/hwmon/abituguru b/Documentation/hwmon/abituguru
index 69cdb527d58f..b2c0d61b39a2 100644
--- a/Documentation/hwmon/abituguru
+++ b/Documentation/hwmon/abituguru
@@ -2,13 +2,36 @@ Kernel driver abituguru
 =======================
 
 Supported chips:
-  * Abit uGuru (Hardware Monitor part only)
+  * Abit uGuru revision 1-3 (Hardware Monitor part only)
     Prefix: 'abituguru'
     Addresses scanned: ISA 0x0E0
     Datasheet: Not available, this driver is based on reverse engineering.
         A "Datasheet" has been written based on the reverse engineering it
         should be available in the same dir as this file under the name
         abituguru-datasheet.
+    Note:
+        The uGuru is a microcontroller with onboard firmware which programs
+        it to behave as a hwmon IC. There are many different revisions of the
+        firmware and thus effectivly many different revisions of the uGuru.
+        Below is an incomplete list with which revisions are used for which
+        Motherboards:
+        uGuru 1.00    ~ 1.24    (AI7, KV8-MAX3, AN7) (1)
+        uGuru 2.0.0.0 ~ 2.0.4.2 (KV8-PRO)
+        uGuru 2.1.0.0 ~ 2.1.2.8 (AS8, AV8, AA8, AG8, AA8XE, AX8)
+        uGuru 2.2.0.0 ~ 2.2.0.6 (AA8 Fatal1ty)
+        uGuru 2.3.0.0 ~ 2.3.0.9 (AN8)
+        uGuru 3.0.0.0 ~ 3.0.1.2 (AW8, AL8, NI8)
+        uGuru 4.xxxxx?          (AT8 32X) (2)
+        1) For revisions 2 and 3 uGuru's the driver can autodetect the
+           sensortype (Volt or Temp) for bank1 sensors, for revision 1 uGuru's
+           this doesnot always work. For these uGuru's the autodection can
+           be overriden with the bank1_types module param. For all 3 known
+           revison 1 motherboards the correct use of this param is:
+           bank1_types=1,1,0,0,0,0,0,2,0,0,0,0,2,0,0,1
+           You may also need to specify the fan_sensors option for these boards
+           fan_sensors=5
+        2) The current version of the abituguru driver is known to NOT work
+           on these Motherboards
 
 Authors:
         Hans de Goede <j.w.r.degoede@hhs.nl>,
@@ -22,6 +45,11 @@ Module Parameters
 * force: bool           Force detection. Note this parameter only causes the
                         detection to be skipped, if the uGuru can't be read
                         the module initialization (insmod) will still fail.
+* bank1_types: int[]    Bank1 sensortype autodetection override:
+                          -1 autodetect (default)
+                           0 volt sensor
+                           1 temp sensor
+                           2 not connected
 * fan_sensors: int      Tell the driver how many fan speed sensors there are
                         on your motherboard. Default: 0 (autodetect).
 * pwms: int             Tell the driver how many fan speed controls (fan
@@ -29,7 +57,7 @@ Module Parameters
 * verbose: int          How verbose should the driver be? (0-3):
                            0 normal output
                            1 + verbose error reporting
-                           2 + sensors type probing info\n"
+                           2 + sensors type probing info (default)
                            3 + retryable error reporting
                         Default: 2 (the driver is still in the testing phase)
 
diff --git a/Documentation/i2c/busses/i2c-sis96x b/Documentation/i2c/busses/i2c-sis96x
index 00a009b977e9..08d7b2dac69a 100644
--- a/Documentation/i2c/busses/i2c-sis96x
+++ b/Documentation/i2c/busses/i2c-sis96x
@@ -42,8 +42,8 @@ I suspect that this driver could be made to work for the following SiS
 chipsets as well: 635, and 635T. If anyone owns a board with those chips
 AND is willing to risk crashing & burning an otherwise well-behaved kernel
 in the name of progress... please contact me at <mhoffman@lightlink.com> or
-via the project's mailing list: <lm-sensors@lm-sensors.org>.  Please
-send bug reports and/or success stories as well.
+via the project's mailing list: <i2c@lm-sensors.org>.  Please send bug
+reports and/or success stories as well.
 
 
 TO DOs
diff --git a/Documentation/usb/usb-serial.txt b/Documentation/usb/usb-serial.txt
index f001cd93b79b..02b0f7beb6d1 100644
--- a/Documentation/usb/usb-serial.txt
+++ b/Documentation/usb/usb-serial.txt
@@ -399,10 +399,10 @@ REINER SCT cyberJack pinpad/e-com USB chipcard reader
 
 Prolific PL2303 Driver
 
-  This driver support any device that has the PL2303 chip from Prolific
+  This driver supports any device that has the PL2303 chip from Prolific
   in it.  This includes a number of single port USB to serial
   converters and USB GPS devices.  Devices from Aten (the UC-232) and
-  IO-Data work with this driver.
+  IO-Data work with this driver, as does the DCU-11 mobile-phone cable.
 
   For any questions or problems with this driver, please contact Greg
   Kroah-Hartman at greg@kroah.com
diff --git a/MAINTAINERS b/MAINTAINERS
index ec8846f58f63..a3462c3414cd 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -274,7 +274,7 @@ S:	Maintained
 ALI1563 I2C DRIVER
 P:      Rudolf Marek
 M:      r.marek@sh.cvut.cz
-L:      lm-sensors@lm-sensors.org
+L:      i2c@lm-sensors.org
 S:      Maintained
 
 ALPHA PORT
@@ -1249,7 +1249,7 @@ S:	Maintained
 I2C SUBSYSTEM
 P:      Jean Delvare
 M:      khali@linux-fr.org
-L:      lm-sensors@lm-sensors.org
+L:      i2c@lm-sensors.org
 W:      http://www.lm-sensors.nu/
 T:      quilt kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/
 S:      Maintained
@@ -2093,7 +2093,7 @@ S:      Maintained
 OPENCORES I2C BUS DRIVER
 P:      Peter Korsgaard
 M:      jacmet@sunsite.dk
-L:      lm-sensors@lm-sensors.org
+L:      i2c@lm-sensors.org
 S:      Maintained
 
 ORACLE CLUSTER FILESYSTEM 2 (OCFS2)
@@ -3138,7 +3138,7 @@ S:	Maintained
 VIAPRO SMBUS DRIVER
 P:      Jean Delvare
 M:      khali@linux-fr.org
-L:      lm-sensors@lm-sensors.org
+L:      i2c@lm-sensors.org
 S:      Maintained
 
 UCLINUX (AND M68KNOMMU)
@@ -3186,6 +3186,11 @@ S:	Maintained
 W1 DALLAS'S 1-WIRE BUS
 P:      Evgeniy Polyakov
 M:      johnpol@2ka.mipt.ru
+S:      Maintained
+
+W83791D HARDWARE MONITORING DRIVER
+P:      Charles Spirakis
+M:      bezaur@gmail.com
 L:      lm-sensors@lm-sensors.org
 S:      Maintained
 
diff --git a/arch/i386/pci/common.c b/arch/i386/pci/common.c
index c624b61e1104..0a362e3aeac5 100644
--- a/arch/i386/pci/common.c
+++ b/arch/i386/pci/common.c
@@ -17,10 +17,6 @@
 
 #include "pci.h"
 
-#ifdef CONFIG_PCI_BIOS
-extern  void pcibios_sort(void);
-#endif
-
 unsigned int pci_probe = PCI_PROBE_BIOS | PCI_PROBE_CONF1 | PCI_PROBE_CONF2 |
                                 PCI_PROBE_MMCONF;
 
diff --git a/arch/i386/pci/pci.h b/arch/i386/pci/pci.h
index 12bf3d8dda29..bf4e79335388 100644
--- a/arch/i386/pci/pci.h
+++ b/arch/i386/pci/pci.h
@@ -84,4 +84,4 @@ extern int pci_conf1_read(unsigned int seg, unsigned int bus,
 extern void pci_direct_init(void);
 extern void pci_pcbios_init(void);
 extern void pci_mmcfg_init(void);
-
+extern void pcibios_sort(void);
diff --git a/drivers/acpi/osl.c b/drivers/acpi/osl.c
index 47dfde95b8f8..b7d1514cd199 100644
--- a/drivers/acpi/osl.c
+++ b/drivers/acpi/osl.c
@@ -36,7 +36,6 @@
 #include <linux/delay.h>
 #include <linux/workqueue.h>
 #include <linux/nmi.h>
-#include <linux/kthread.h>
 #include <acpi/acpi.h>
 #include <asm/io.h>
 #include <acpi/acpi_bus.h>
@@ -583,16 +582,6 @@ static void acpi_os_execute_deferred(void *context)
         return;
 }
 
-static int acpi_os_execute_thread(void *context)
-{
-        struct acpi_os_dpc *dpc = (struct acpi_os_dpc *)context;
-        if (dpc) {
-                dpc->function(dpc->context);
-                kfree(dpc);
-        }
-        do_exit(0);
-}
-
 /*******************************************************************************
  *
  * FUNCTION:    acpi_os_execute
@@ -614,10 +603,16 @@ acpi_status acpi_os_execute(acpi_execute_type type,
         acpi_status status = AE_OK;
         struct acpi_os_dpc *dpc;
         struct work_struct *task;
-        struct task_struct *p;
+
+        ACPI_FUNCTION_TRACE("os_queue_for_execution");
+
+        ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
+                          "Scheduling function [%p(%p)] for deferred execution.\n",
+                          function, context));
 
         if (!function)
-                return AE_BAD_PARAMETER;
+                return_ACPI_STATUS(AE_BAD_PARAMETER);
+
         /*
          * Allocate/initialize DPC structure.  Note that this memory will be
          * freed by the callee.  The kernel handles the tq_struct list  in a
@@ -628,34 +623,27 @@ acpi_status acpi_os_execute(acpi_execute_type type,
          * We can save time and code by allocating the DPC and tq_structs
          * from the same memory.
          */
-        if (type == OSL_NOTIFY_HANDLER) {
-                dpc = kmalloc(sizeof(struct acpi_os_dpc), GFP_KERNEL);
-        } else {
-                dpc = kmalloc(sizeof(struct acpi_os_dpc) +
-                                sizeof(struct work_struct), GFP_ATOMIC);
-        }
+
+        dpc =
+            kmalloc(sizeof(struct acpi_os_dpc) + sizeof(struct work_struct),
+                    GFP_ATOMIC);
         if (!dpc)
-                return AE_NO_MEMORY;
+                return_ACPI_STATUS(AE_NO_MEMORY);
+
         dpc->function = function;
         dpc->context = context;
 
-        if (type == OSL_NOTIFY_HANDLER) {
-                p = kthread_create(acpi_os_execute_thread, dpc, "kacpid_notify");
-                if (!IS_ERR(p)) {
-                        wake_up_process(p);
-                } else {
-                        status = AE_NO_MEMORY;
-                        kfree(dpc);
-                }
-        } else {
-                task = (void *)(dpc + 1);
-                INIT_WORK(task, acpi_os_execute_deferred, (void *)dpc);
-                if (!queue_work(kacpid_wq, task)) {
-                        status = AE_ERROR;
-                        kfree(dpc);
-                }
+        task = (void *)(dpc + 1);
+        INIT_WORK(task, acpi_os_execute_deferred, (void *)dpc);
+
+        if (!queue_work(kacpid_wq, task)) {
+                ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
+                                  "Call to queue_work() failed.\n"));
+                kfree(dpc);
+                status = AE_ERROR;
         }
-        return status;
+
+        return_ACPI_STATUS(status);
 }
 
 EXPORT_SYMBOL(acpi_os_execute);
diff --git a/drivers/base/bus.c b/drivers/base/bus.c
index 83fa8b291a59..2e954d07175a 100644
--- a/drivers/base/bus.c
+++ b/drivers/base/bus.c
@@ -129,7 +129,7 @@ static struct kobj_type ktype_bus = {
 
 };
 
-decl_subsys(bus, &ktype_bus, NULL);
+static decl_subsys(bus, &ktype_bus, NULL);
 
 
 #ifdef CONFIG_HOTPLUG
@@ -598,12 +598,13 @@ void put_bus(struct bus_type * bus)
  *
  *      Note that kset_find_obj increments bus' reference count.
  */
-
+#if 0
 struct bus_type * find_bus(char * name)
 {
         struct kobject * k = kset_find_obj(&bus_subsys.kset, name);
         return k ? to_bus(k) : NULL;
 }
+#endif  /*  0  */
 
 
 /**
diff --git a/drivers/base/core.c b/drivers/base/core.c
index b21f864c9ce8..be6b5bc0677d 100644
--- a/drivers/base/core.c
+++ b/drivers/base/core.c
@@ -559,20 +559,20 @@ static void device_create_release(struct device *dev)
 
 /**
  * device_create - creates a device and registers it with sysfs
- * @cs: pointer to the struct class that this device should be registered to.
- * @parent: pointer to the parent struct device of this new device, if any.
- * @dev: the dev_t for the char device to be added.
- * @fmt: string for the class device's name
+ * @class: pointer to the struct class that this device should be registered to
+ * @parent: pointer to the parent struct device of this new device, if any
+ * @devt: the dev_t for the char device to be added
+ * @fmt: string for the device's name
+ *
+ * This function can be used by char device classes.  A struct device
+ * will be created in sysfs, registered to the specified class.
  *
- * This function can be used by char device classes.  A struct
- * device will be created in sysfs, registered to the specified
- * class.
  * A "dev" file will be created, showing the dev_t for the device, if
  * the dev_t is not 0,0.
- * If a pointer to a parent struct device is passed in, the newly
- * created struct device will be a child of that device in sysfs.  The
- * pointer to the struct device will be returned from the call.  Any
- * further sysfs files that might be required can be created using this
+ * If a pointer to a parent struct device is passed in, the newly created
+ * struct device will be a child of that device in sysfs.
+ * The pointer to the struct device will be returned from the call.
+ * Any further sysfs files that might be required can be created using this
  * pointer.
  *
  * Note: the struct class passed to this function must have previously
@@ -620,11 +620,11 @@ EXPORT_SYMBOL_GPL(device_create);
 
 /**
  * device_destroy - removes a device that was created with device_create()
- * @class: the pointer to the struct class that this device was registered * with.
- * @dev: the dev_t of the device that was previously registered.
+ * @class: pointer to the struct class that this device was registered with
+ * @devt: the dev_t of the device that was previously registered
  *
- * This call unregisters and cleans up a class device that was created with a
- * call to class_device_create()
+ * This call unregisters and cleans up a device that was created with a
+ * call to device_create().
  */
 void device_destroy(struct class *class, dev_t devt)
 {
diff --git a/drivers/hwmon/abituguru.c b/drivers/hwmon/abituguru.c
index 59122cc0a50a..cc15c4f2e9ec 100644
--- a/drivers/hwmon/abituguru.c
+++ b/drivers/hwmon/abituguru.c
@@ -142,6 +142,14 @@ static const u8 abituguru_pwm_max[5] = { 0, 255, 255, 75, 75 };
 static int force;
 module_param(force, bool, 0);
 MODULE_PARM_DESC(force, "Set to one to force detection.");
+static int bank1_types[ABIT_UGURU_MAX_BANK1_SENSORS] = { -1, -1, -1, -1, -1,
+        -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1 };
+module_param_array(bank1_types, int, NULL, 0);
+MODULE_PARM_DESC(bank1_types, "Bank1 sensortype autodetection override:\n"
+        "   -1 autodetect\n"
+        "    0 volt sensor\n"
+        "    1 temp sensor\n"
+        "    2 not connected");
 static int fan_sensors;
 module_param(fan_sensors, int, 0);
 MODULE_PARM_DESC(fan_sensors, "Number of fan sensors on the uGuru "
@@ -397,6 +405,15 @@ abituguru_detect_bank1_sensor_type(struct abituguru_data *data,
         u8 val, buf[3];
         int ret = ABIT_UGURU_NC;
 
+        /* If overriden by the user return the user selected type */
+        if (bank1_types[sensor_addr] >= ABIT_UGURU_IN_SENSOR &&
+                        bank1_types[sensor_addr] <= ABIT_UGURU_NC) {
+                ABIT_UGURU_DEBUG(2, "assuming sensor type %d for bank1 sensor "
+                        "%d because of \"bank1_types\" module param\n",
+                        bank1_types[sensor_addr], (int)sensor_addr);
+                return bank1_types[sensor_addr];
+        }
+
         /* First read the sensor and the current settings */
         if (abituguru_read(data, ABIT_UGURU_SENSOR_BANK1, sensor_addr, &val,
                         1, ABIT_UGURU_MAX_RETRIES) != 1)
@@ -514,7 +531,7 @@ abituguru_detect_no_bank2_sensors(struct abituguru_data *data)
 {
         int i;
 
-        if (fan_sensors) {
+        if (fan_sensors > 0 && fan_sensors <= ABIT_UGURU_MAX_BANK2_SENSORS) {
                 data->bank2_sensors = fan_sensors;
                 ABIT_UGURU_DEBUG(2, "assuming %d fan sensors because of "
                         "\"fan_sensors\" module param\n",
@@ -568,7 +585,7 @@ abituguru_detect_no_pwms(struct abituguru_data *data)
 {
         int i, j;
 
-        if (pwms) {
+        if (pwms > 0 && pwms <= ABIT_UGURU_MAX_PWMS) {
                 data->pwms = pwms;
                 ABIT_UGURU_DEBUG(2, "assuming %d PWM outputs because of "
                         "\"pwms\" module param\n", (int)data->pwms);
diff --git a/drivers/i2c/algos/i2c-algo-bit.c b/drivers/i2c/algos/i2c-algo-bit.c
index df05df1a0ef6..ab230c033f99 100644
--- a/drivers/i2c/algos/i2c-algo-bit.c
+++ b/drivers/i2c/algos/i2c-algo-bit.c
@@ -372,7 +372,6 @@ static inline int readbytes(struct i2c_adapter *i2c_adap, struct i2c_msg *msg)
 
         while (count > 0) {
                 inval = i2c_inb(i2c_adap);
-/*printk("%#02x ",inval); if ( ! (count % 16) ) printk("\n"); */
                 if (inval>=0) {
                         *temp = inval;
                         rdcount++;
@@ -544,8 +543,7 @@ int i2c_bit_add_bus(struct i2c_adapter *adap)
         adap->timeout = 100;    /* default values, should       */
         adap->retries = 3;      /* be replaced by defines       */
 
-        i2c_add_adapter(adap);
-        return 0;
+        return i2c_add_adapter(adap);
 }
 
 
diff --git a/drivers/i2c/algos/i2c-algo-ite.c b/drivers/i2c/algos/i2c-algo-ite.c
index 2db7bfc85225..70d8eefb5efc 100644
--- a/drivers/i2c/algos/i2c-algo-ite.c
+++ b/drivers/i2c/algos/i2c-algo-ite.c
@@ -742,10 +742,8 @@ int i2c_iic_add_bus(struct i2c_adapter *adap)
         adap->retries = 3;              /* be replaced by defines       */
         adap->flags = 0;
 
-        i2c_add_adapter(adap);
         iic_init(iic_adap);
-
-        return 0;
+        return i2c_add_adapter(adap);
 }
 
 
diff --git a/drivers/i2c/algos/i2c-algo-pca.c b/drivers/i2c/algos/i2c-algo-pca.c
index 82946acab4c7..b88a6fcf7bd0 100644
--- a/drivers/i2c/algos/i2c-algo-pca.c
+++ b/drivers/i2c/algos/i2c-algo-pca.c
@@ -374,10 +374,10 @@ int i2c_pca_add_bus(struct i2c_adapter *adap)
         adap->timeout = 100;            /* default values, should       */
         adap->retries = 3;              /* be replaced by defines       */
 
-        rval = pca_init(pca_adap);
+        if ((rval = pca_init(pca_adap)))
+                return rval;
 
-        if (!rval)
-                i2c_add_adapter(adap);
+        rval = i2c_add_adapter(adap);
 
         return rval;
 }
diff --git a/drivers/i2c/algos/i2c-algo-pcf.c b/drivers/i2c/algos/i2c-algo-pcf.c
index 6e498df1f717..5b24930adb5a 100644
--- a/drivers/i2c/algos/i2c-algo-pcf.c
+++ b/drivers/i2c/algos/i2c-algo-pcf.c
@@ -479,9 +479,11 @@ int i2c_pcf_add_bus(struct i2c_adapter *adap)
         adap->timeout = 100;            /* default values, should       */
         adap->retries = 3;              /* be replaced by defines       */
 
-        rval = pcf_init_8584(pcf_adap);
-        if (!rval)
-                i2c_add_adapter(adap);
+        if ((rval = pcf_init_8584(pcf_adap)))
+                return rval;
+
+        rval = i2c_add_adapter(adap);
+
         return rval;
 }
 
diff --git a/drivers/i2c/algos/i2c-algo-sibyte.c b/drivers/i2c/algos/i2c-algo-sibyte.c
index 3df3f09995c2..32d41c6fac0f 100644
--- a/drivers/i2c/algos/i2c-algo-sibyte.c
+++ b/drivers/i2c/algos/i2c-algo-sibyte.c
@@ -173,9 +173,7 @@ int i2c_sibyte_add_bus(struct i2c_adapter *i2c_adap, int speed)
                 printk("\n");
         }
 
-        i2c_add_adapter(i2c_adap);
-
-        return 0;
+        return i2c_add_adapter(i2c_adap);
 }
 
 
diff --git a/drivers/i2c/busses/i2c-iop3xx.c b/drivers/i2c/busses/i2c-iop3xx.c
index aca7e1668605..48c56939c861 100644
--- a/drivers/i2c/busses/i2c-iop3xx.c
+++ b/drivers/i2c/busses/i2c-iop3xx.c
@@ -21,6 +21,9 @@
  * - Make it work with IXP46x chips
  * - Cleanup function names, coding style, etc
  *
+ * - writing to slave address causes latchup on iop331.
+ *      fix: driver refuses to address self.
+ *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, version 2.
@@ -73,12 +76,6 @@ iop3xx_i2c_reset(struct i2c_algo_iop3xx_data *iop3xx_adap)
 } 
 
 static void 
-iop3xx_i2c_set_slave_addr(struct i2c_algo_iop3xx_data *iop3xx_adap)
-{
-        __raw_writel(MYSAR, iop3xx_adap->ioaddr + SAR_OFFSET);
-}
-
-static void 
 iop3xx_i2c_enable(struct i2c_algo_iop3xx_data *iop3xx_adap)
 {
         u32 cr = IOP3XX_ICR_GCD | IOP3XX_ICR_SCLEN | IOP3XX_ICR_UE;
@@ -248,6 +245,13 @@ iop3xx_i2c_send_target_addr(struct i2c_algo_iop3xx_data *iop3xx_adap,
         int status;
         int rc;
 
+        /* avoid writing to my slave address (hangs on 80331),
+         * forbidden in Intel developer manual
+         */
+        if (msg->addr == MYSAR) {
+                return -EBUSY;
+        }
+
         __raw_writel(iic_cook_addr(msg), iop3xx_adap->ioaddr + DBR_OFFSET);
         
         cr &= ~(IOP3XX_ICR_MSTOP | IOP3XX_ICR_NACK);
@@ -498,7 +502,6 @@ iop3xx_i2c_probe(struct platform_device *pdev)
         spin_lock_init(&adapter_data->lock);
 
         iop3xx_i2c_reset(adapter_data);
-        iop3xx_i2c_set_slave_addr(adapter_data);
         iop3xx_i2c_enable(adapter_data);
 
         platform_set_drvdata(pdev, new_adapter);
diff --git a/drivers/i2c/busses/i2c-iop3xx.h b/drivers/i2c/busses/i2c-iop3xx.h
index e46ebaea7b1e..8485861f6a36 100644
--- a/drivers/i2c/busses/i2c-iop3xx.h
+++ b/drivers/i2c/busses/i2c-iop3xx.h
@@ -80,7 +80,7 @@
 #define IOP3XX_GPOD_I2C0        0x00c0  /* clear these bits to enable ch0 */
 #define IOP3XX_GPOD_I2C1        0x0030  /* clear these bits to enable ch1 */
 
-#define MYSAR                   0x02    /* SWAG a suitable slave address */
+#define MYSAR                   0       /* default slave address */
 
 #define I2C_ERR                 321
 #define I2C_ERR_BERR            (I2C_ERR+0)
diff --git a/drivers/i2c/busses/i2c-powermac.c b/drivers/i2c/busses/i2c-powermac.c
index 2a0b3be7cdd0..53bb43593863 100644
--- a/drivers/i2c/busses/i2c-powermac.c
+++ b/drivers/i2c/busses/i2c-powermac.c
@@ -148,8 +148,6 @@ static int i2c_powermac_master_xfer(	struct i2c_adapter *adap,
         int                     read;
         int                     addrdir;
 
-        if (num != 1)
-                return -EINVAL;
         if (msgs->flags & I2C_M_TEN)
                 return -EINVAL;
         read = (msgs->flags & I2C_M_RD) != 0;
@@ -166,7 +164,7 @@ static int i2c_powermac_master_xfer(	struct i2c_adapter *adap,
         rc = pmac_i2c_xfer(bus, addrdir, 0, 0, msgs->buf, msgs->len);
  bail:
         pmac_i2c_close(bus);
-        return rc < 0 ? rc : msgs->len;
+        return rc < 0 ? rc : 1;
 }
 
 static u32 i2c_powermac_func(struct i2c_adapter * adapter)
diff --git a/drivers/i2c/busses/scx200_acb.c b/drivers/i2c/busses/scx200_acb.c
index 22a3eda04166..ced309ff056f 100644
--- a/drivers/i2c/busses/scx200_acb.c
+++ b/drivers/i2c/busses/scx200_acb.c
@@ -184,21 +184,21 @@ static void scx200_acb_machine(struct scx200_acb_iface *iface, u8 status)
                 break;
 
         case state_read:
-                /* Set ACK if receiving the last byte */
-                if (iface->len == 1)
+                /* Set ACK if _next_ byte will be the last one */
+                if (iface->len == 2)
                         outb(inb(ACBCTL1) | ACBCTL1_ACK, ACBCTL1);
                 else
                         outb(inb(ACBCTL1) & ~ACBCTL1_ACK, ACBCTL1);
 
-                *iface->ptr++ = inb(ACBSDA);
-                --iface->len;
-
-                if (iface->len == 0) {
+                if (iface->len == 1) {
                         iface->result = 0;
                         iface->state = state_idle;
                         outb(inb(ACBCTL1) | ACBCTL1_STOP, ACBCTL1);
                 }
 
+                *iface->ptr++ = inb(ACBSDA);
+                --iface->len;
+
                 break;
 
         case state_write:
@@ -307,8 +307,12 @@ static s32 scx200_acb_smbus_xfer(struct i2c_adapter *adapter,
                 buffer = (u8 *)&cur_word;
                 break;
 
-        case I2C_SMBUS_BLOCK_DATA:
+        case I2C_SMBUS_I2C_BLOCK_DATA:
+                if (rw == I2C_SMBUS_READ)
+                        data->block[0] = I2C_SMBUS_BLOCK_MAX; /* For now */
                 len = data->block[0];
+                if (len == 0 || len > I2C_SMBUS_BLOCK_MAX)
+                        return -EINVAL;
                 buffer = &data->block[1];
                 break;
 
@@ -372,7 +376,7 @@ static u32 scx200_acb_func(struct i2c_adapter *adapter)
 {
         return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
                I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
-               I2C_FUNC_SMBUS_BLOCK_DATA;
+               I2C_FUNC_SMBUS_I2C_BLOCK;
 }
 
 /* For now, we only handle combined mode (smbus) */
diff --git a/drivers/i2c/chips/pca9539.c b/drivers/i2c/chips/pca9539.c
index 54b6e6a4beed..cb22280cdd27 100644
--- a/drivers/i2c/chips/pca9539.c
+++ b/drivers/i2c/chips/pca9539.c
@@ -134,11 +134,13 @@ static int pca9539_detect(struct i2c_adapter *adapter, int address, int kind)
         new_client->driver = &pca9539_driver;
         new_client->flags = 0;
 
-        /* Detection: the pca9539 only has 8 registers (0-7).
-           A read of 7 should succeed, but a read of 8 should fail. */
-        if ((i2c_smbus_read_byte_data(new_client, 7) < 0) ||
-            (i2c_smbus_read_byte_data(new_client, 8) >= 0))
-                goto exit_kfree;
+        if (kind < 0) {
+                /* Detection: the pca9539 only has 8 registers (0-7).
+                   A read of 7 should succeed, but a read of 8 should fail. */
+                if ((i2c_smbus_read_byte_data(new_client, 7) < 0) ||
+                    (i2c_smbus_read_byte_data(new_client, 8) >= 0))
+                        goto exit_kfree;
+        }
 
         strlcpy(new_client->name, "pca9539", I2C_NAME_SIZE);
 
diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c
index a45155f799d4..9cb277d6aa48 100644
--- a/drivers/i2c/i2c-core.c
+++ b/drivers/i2c/i2c-core.c
@@ -756,9 +756,9 @@ int i2c_probe(struct i2c_adapter *adapter,
                                         "parameter for adapter %d, "
                                         "addr 0x%02x\n", adap_id,
                                         address_data->ignore[j + 1]);
+                                ignore = 1;
+                                break;
                         }
-                        ignore = 1;
-                        break;
                 }
                 if (ignore)
                         continue;
diff --git a/drivers/ide/legacy/ide-cs.c b/drivers/ide/legacy/ide-cs.c
index b7e459e4f284..602797a44208 100644
--- a/drivers/ide/legacy/ide-cs.c
+++ b/drivers/ide/legacy/ide-cs.c
@@ -146,16 +146,7 @@ static void ide_detach(struct pcmcia_device *link)
     kfree(link->priv);
 } /* ide_detach */
 
-static void idecs_mmio_fixup(ide_hwif_t *hwif)
-{
-        default_hwif_mmiops(hwif);
-        hwif->mmio = 2;
-
-        ide_undecoded_slave(hwif);
-}
-
-static int idecs_register(unsigned long io, unsigned long ctl,
-        unsigned long irq, struct pcmcia_device *handle, int is_mmio)
+static int idecs_register(unsigned long io, unsigned long ctl, unsigned long irq, struct pcmcia_device *handle)
 {
     hw_regs_t hw;
     memset(&hw, 0, sizeof(hw));
@@ -163,19 +154,7 @@ static int idecs_register(unsigned long io, unsigned long ctl,
     hw.irq = irq;
     hw.chipset = ide_pci;
     hw.dev = &handle->dev;
-
-    if(is_mmio)
-        return ide_register_hw_with_fixup(&hw, NULL, idecs_mmio_fixup);
-    else
-        return ide_register_hw_with_fixup(&hw, NULL, ide_undecoded_slave);
-}
-
-void outb_io(unsigned char value, unsigned long port) {
-        outb(value, port);
-}
-
-void outb_mem(unsigned char value, unsigned long port) {
-        writeb(value, (void __iomem *) port);
+    return ide_register_hw_with_fixup(&hw, NULL, ide_undecoded_slave);
 }
 
 /*======================================================================
@@ -201,8 +180,7 @@ static int ide_config(struct pcmcia_device *link)
     } *stk = NULL;
     cistpl_cftable_entry_t *cfg;
     int i, pass, last_ret = 0, last_fn = 0, hd, is_kme = 0;
-    unsigned long io_base, ctl_base, is_mmio, try_slave;
-    void (*my_outb)(unsigned char, unsigned long);
+    unsigned long io_base, ctl_base;
 
     DEBUG(0, "ide_config(0x%p)\n", link);
 
@@ -232,7 +210,7 @@ static int ide_config(struct pcmcia_device *link)
     /* Not sure if this is right... look up the current Vcc */
     CS_CHECK(GetConfigurationInfo, pcmcia_get_configuration_info(link, &stk->conf));
 
-    pass = io_base = ctl_base = is_mmio = try_slave = 0;
+    pass = io_base = ctl_base = 0;
     tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
     tuple.Attributes = 0;
     CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple));
@@ -280,45 +258,11 @@ static int ide_config(struct pcmcia_device *link)
                         goto next_entry;
                 io_base = link->io.BasePort1;
                 ctl_base = link->io.BasePort1 + 0x0e;
-
-                if (io->win[0].len >= 0x20)
-                        try_slave = 1;
-
             } else goto next_entry;
             /* If we've got this far, we're done */
             break;
         }
 
-        if ((cfg->mem.nwin > 0) || (stk->dflt.mem.nwin > 0)) {
-            win_req_t req;
-            memreq_t map;
-            cistpl_mem_t *mem = (cfg->mem.nwin) ? &cfg->mem : &stk->dflt.mem;
-
-            if (mem->win[0].len < 16)
-                goto next_entry;
-
-            req.Attributes = WIN_DATA_WIDTH_16|WIN_MEMORY_TYPE_CM;
-            req.Attributes |= WIN_ENABLE;
-            req.Base = mem->win[0].host_addr;
-            req.Size = 0;
-
-            req.AccessSpeed = 0;
-            if (pcmcia_request_window(&link, &req, &link->win) != 0)
-                goto next_entry;
-            map.Page = 0; map.CardOffset = mem->win[0].card_addr;
-            if (pcmcia_map_mem_page(link->win, &map) != 0)
-                goto next_entry;
-
-            io_base = (unsigned long) ioremap(req.Base, req.Size);
-            ctl_base = io_base + 0x0e;
-            is_mmio = 1;
-
-            if (mem->win[0].len >= 0x20)
-                try_slave = 1;
-
-            break;
-        }
-
     next_entry:
         if (cfg->flags & CISTPL_CFTABLE_DEFAULT)
             memcpy(&stk->dflt, cfg, sizeof(stk->dflt));
@@ -334,26 +278,21 @@ static int ide_config(struct pcmcia_device *link)
     CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq));
     CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link, &link->conf));
 
-    if(is_mmio)
-        my_outb = outb_mem;
-    else
-        my_outb = outb_io;
-
     /* disable drive interrupts during IDE probe */
-    my_outb(0x02, ctl_base);
+    outb(0x02, ctl_base);
 
     /* special setup for KXLC005 card */
     if (is_kme)
-        my_outb(0x81, ctl_base+1);
+        outb(0x81, ctl_base+1);
 
     /* retry registration in case device is still spinning up */
     for (hd = -1, i = 0; i < 10; i++) {
-        hd = idecs_register(io_base, ctl_base, link->irq.AssignedIRQ, link, is_mmio);
+        hd = idecs_register(io_base, ctl_base, link->irq.AssignedIRQ, link);
         if (hd >= 0) break;
-        if (try_slave) {
-            my_outb(0x02, ctl_base + 0x10);
+        if (link->io.NumPorts1 == 0x20) {
+            outb(0x02, ctl_base + 0x10);
             hd = idecs_register(io_base + 0x10, ctl_base + 0x10,
-                                link->irq.AssignedIRQ, link, is_mmio);
+                                link->irq.AssignedIRQ, link);
             if (hd >= 0) {
                 io_base += 0x10;
                 ctl_base += 0x10;
diff --git a/drivers/net/8139cp.c b/drivers/net/8139cp.c
index d2150baa7e35..1428bb7715af 100644
--- a/drivers/net/8139cp.c
+++ b/drivers/net/8139cp.c
@@ -1916,7 +1916,7 @@ static int cp_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
         regs = ioremap(pciaddr, CP_REGS_SIZE);
         if (!regs) {
                 rc = -EIO;
-                dev_err(&pdev->dev, "Cannot map PCI MMIO (%lx@%lx)\n",
+                dev_err(&pdev->dev, "Cannot map PCI MMIO (%Lx@%Lx)\n",
                        (unsigned long long)pci_resource_len(pdev, 1),
                        (unsigned long long)pciaddr);
                 goto err_out_res;
diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c
index 6e7d31bacf4d..6d3d41934503 100644
--- a/drivers/net/e1000/e1000_main.c
+++ b/drivers/net/e1000/e1000_main.c
@@ -283,7 +283,7 @@ static int e1000_request_irq(struct e1000_adapter *adapter)
                 }
         }
         if (adapter->have_msi)
-                flags &= ~SA_SHIRQ;
+                flags &= ~IRQF_SHARED;
 #endif
         if ((err = request_irq(adapter->pdev->irq, &e1000_intr, flags,
                                netdev->name, netdev)))
diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c
index ad81ec68f887..11b8f1b43dd5 100644
--- a/drivers/net/forcedeth.c
+++ b/drivers/net/forcedeth.c
@@ -240,10 +240,12 @@ enum {
 #define NVREG_RNDSEED_FORCE2    0x2d00
 #define NVREG_RNDSEED_FORCE3    0x7400
 
-        NvRegUnknownSetupReg1 = 0xA0,
-#define NVREG_UNKSETUP1_VAL     0x16070f
-        NvRegUnknownSetupReg2 = 0xA4,
-#define NVREG_UNKSETUP2_VAL     0x16
+        NvRegTxDeferral = 0xA0,
+#define NVREG_TX_DEFERRAL_DEFAULT       0x15050f
+#define NVREG_TX_DEFERRAL_RGMII_10_100  0x16070f
+#define NVREG_TX_DEFERRAL_RGMII_1000    0x14050f
+        NvRegRxDeferral = 0xA4,
+#define NVREG_RX_DEFERRAL_DEFAULT       0x16
         NvRegMacAddrA = 0xA8,
         NvRegMacAddrB = 0xAC,
         NvRegMulticastAddrA = 0xB0,
@@ -269,8 +271,10 @@ enum {
 #define NVREG_LINKSPEED_MASK    (0xFFF)
         NvRegUnknownSetupReg5 = 0x130,
 #define NVREG_UNKSETUP5_BIT31   (1<<31)
-        NvRegUnknownSetupReg3 = 0x13c,
-#define NVREG_UNKSETUP3_VAL1    0x200010
+        NvRegTxWatermark = 0x13c,
+#define NVREG_TX_WM_DESC1_DEFAULT       0x0200010
+#define NVREG_TX_WM_DESC2_3_DEFAULT     0x1e08000
+#define NVREG_TX_WM_DESC2_3_1000        0xfe08000
         NvRegTxRxControl = 0x144,
 #define NVREG_TXRXCTL_KICK      0x0001
 #define NVREG_TXRXCTL_BIT1      0x0002
@@ -658,7 +662,7 @@ static const struct register_test nv_registers_test[] = {
         { NvRegMisc1, 0x03c },
         { NvRegOffloadConfig, 0x03ff },
         { NvRegMulticastAddrA, 0xffffffff },
-        { NvRegUnknownSetupReg3, 0x0ff },
+        { NvRegTxWatermark, 0x0ff },
         { NvRegWakeUpFlags, 0x07777 },
         { 0,0 }
 };
@@ -2127,7 +2131,7 @@ static int nv_update_linkspeed(struct net_device *dev)
         int newdup = np->duplex;
         int mii_status;
         int retval = 0;
-        u32 control_1000, status_1000, phyreg, pause_flags;
+        u32 control_1000, status_1000, phyreg, pause_flags, txreg;
 
         /* BMSR_LSTATUS is latched, read it twice:
          * we want the current value.
@@ -2245,6 +2249,26 @@ set_speed:
                 phyreg |= PHY_1000;
         writel(phyreg, base + NvRegPhyInterface);
 
+        if (phyreg & PHY_RGMII) {
+                if ((np->linkspeed & NVREG_LINKSPEED_MASK) == NVREG_LINKSPEED_1000)
+                        txreg = NVREG_TX_DEFERRAL_RGMII_1000;
+                else
+                        txreg = NVREG_TX_DEFERRAL_RGMII_10_100;
+        } else {
+                txreg = NVREG_TX_DEFERRAL_DEFAULT;
+        }
+        writel(txreg, base + NvRegTxDeferral);
+
+        if (np->desc_ver == DESC_VER_1) {
+                txreg = NVREG_TX_WM_DESC1_DEFAULT;
+        } else {
+                if ((np->linkspeed & NVREG_LINKSPEED_MASK) == NVREG_LINKSPEED_1000)
+                        txreg = NVREG_TX_WM_DESC2_3_1000;
+                else
+                        txreg = NVREG_TX_WM_DESC2_3_DEFAULT;
+        }
+        writel(txreg, base + NvRegTxWatermark);
+
         writel(NVREG_MISC1_FORCE | ( np->duplex ? 0 : NVREG_MISC1_HD),
                 base + NvRegMisc1);
         pci_push(base);
@@ -3910,7 +3934,10 @@ static int nv_open(struct net_device *dev)
 
         /* 5) continue setup */
         writel(np->linkspeed, base + NvRegLinkSpeed);
-        writel(NVREG_UNKSETUP3_VAL1, base + NvRegUnknownSetupReg3);
+        if (np->desc_ver == DESC_VER_1)
+                writel(NVREG_TX_WM_DESC1_DEFAULT, base + NvRegTxWatermark);
+        else
+                writel(NVREG_TX_WM_DESC2_3_DEFAULT, base + NvRegTxWatermark);
         writel(np->txrxctl_bits, base + NvRegTxRxControl);
         writel(np->vlanctl_bits, base + NvRegVlanControl);
         pci_push(base);
@@ -3932,8 +3959,8 @@ static int nv_open(struct net_device *dev)
         writel(readl(base + NvRegReceiverStatus), base + NvRegReceiverStatus);
         get_random_bytes(&i, sizeof(i));
         writel(NVREG_RNDSEED_FORCE | (i&NVREG_RNDSEED_MASK), base + NvRegRandomSeed);
-        writel(NVREG_UNKSETUP1_VAL, base + NvRegUnknownSetupReg1);
-        writel(NVREG_UNKSETUP2_VAL, base + NvRegUnknownSetupReg2);
+        writel(NVREG_TX_DEFERRAL_DEFAULT, base + NvRegTxDeferral);
+        writel(NVREG_RX_DEFERRAL_DEFAULT, base + NvRegRxDeferral);
         if (poll_interval == -1) {
                 if (optimization_mode == NV_OPTIMIZATION_MODE_THROUGHPUT)
                         writel(NVREG_POLL_DEFAULT_THROUGHPUT, base + NvRegPollingInterval);
diff --git a/drivers/net/irda/smsc-ircc2.c b/drivers/net/irda/smsc-ircc2.c
index a4674044bd6f..2eff45bedc7c 100644
--- a/drivers/net/irda/smsc-ircc2.c
+++ b/drivers/net/irda/smsc-ircc2.c
@@ -2353,7 +2353,7 @@ static int __init smsc_superio_lpc(unsigned short cfg_base)
 #ifdef CONFIG_PCI
 #define PCIID_VENDOR_INTEL 0x8086
 #define PCIID_VENDOR_ALI 0x10b9
-static struct smsc_ircc_subsystem_configuration subsystem_configurations[] __devinitdata = {
+static struct smsc_ircc_subsystem_configuration subsystem_configurations[] __initdata = {
         {
                 .vendor = PCIID_VENDOR_INTEL, /* Intel 82801DBM LPC bridge */
                 .device = 0x24cc,
diff --git a/drivers/net/ixgb/ixgb_main.c b/drivers/net/ixgb/ixgb_main.c
index 7eb08d929139..7bbd447289b5 100644
--- a/drivers/net/ixgb/ixgb_main.c
+++ b/drivers/net/ixgb/ixgb_main.c
@@ -1281,7 +1281,7 @@ ixgb_tx_map(struct ixgb_adapter *adapter, struct sk_buff *skb,
 
         while(len) {
                 buffer_info = &tx_ring->buffer_info[i];
-                size = min(len, IXGB_MAX_JUMBO_FRAME_SIZE);
+                size = min(len, IXGB_MAX_DATA_PER_TXD);
                 buffer_info->length = size;
                 buffer_info->dma =
                         pci_map_single(adapter->pdev,
@@ -1306,7 +1306,7 @@ ixgb_tx_map(struct ixgb_adapter *adapter, struct sk_buff *skb,
 
                 while(len) {
                         buffer_info = &tx_ring->buffer_info[i];
-                        size = min(len, IXGB_MAX_JUMBO_FRAME_SIZE);
+                        size = min(len, IXGB_MAX_DATA_PER_TXD);
                         buffer_info->length = size;
                         buffer_info->dma =
                                 pci_map_page(adapter->pdev,
diff --git a/drivers/net/myri10ge/myri10ge.c b/drivers/net/myri10ge/myri10ge.c
index ee1de971a712..07ca9480a6fe 100644
--- a/drivers/net/myri10ge/myri10ge.c
+++ b/drivers/net/myri10ge/myri10ge.c
@@ -2412,14 +2412,20 @@ static int myri10ge_resume(struct pci_dev *pdev)
                 return -EIO;
         }
         myri10ge_restore_state(mgp);
-        pci_enable_device(pdev);
+
+        status = pci_enable_device(pdev);
+        if (status < 0) {
+                dev_err(&pdev->dev, "failed to enable device\n");
+                return -EIO;
+        }
+
         pci_set_master(pdev);
 
         status = request_irq(pdev->irq, myri10ge_intr, IRQF_SHARED,
                              netdev->name, mgp);
         if (status != 0) {
                 dev_err(&pdev->dev, "failed to allocate IRQ\n");
-                goto abort_with_msi;
+                goto abort_with_enabled;
         }
 
         myri10ge_reset(mgp);
@@ -2438,7 +2444,8 @@ static int myri10ge_resume(struct pci_dev *pdev)
 
         return 0;
 
-abort_with_msi:
+abort_with_enabled:
+        pci_disable_device(pdev);
         return -EIO;
 
 }
diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c
index c6b77acb35ef..e1fe3a0a7b0b 100644
--- a/drivers/net/s2io.c
+++ b/drivers/net/s2io.c
@@ -1976,7 +1976,6 @@ static int start_nic(struct s2io_nic *nic)
         XENA_dev_config_t __iomem *bar0 = nic->bar0;
         struct net_device *dev = nic->dev;
         register u64 val64 = 0;
-        u16 interruptible;
         u16 subid, i;
         mac_info_t *mac_control;
         struct config_param *config;
@@ -2047,16 +2046,6 @@ static int start_nic(struct s2io_nic *nic)
                 return FAILURE;
         }
 
-        /*  Enable select interrupts */
-        if (nic->intr_type != INTA)
-                en_dis_able_nic_intrs(nic, ENA_ALL_INTRS, DISABLE_INTRS);
-        else {
-                interruptible = TX_TRAFFIC_INTR | RX_TRAFFIC_INTR;
-                interruptible |= TX_PIC_INTR | RX_PIC_INTR;
-                interruptible |= TX_MAC_INTR | RX_MAC_INTR;
-                en_dis_able_nic_intrs(nic, interruptible, ENABLE_INTRS);
-        }
-
         /*
          * With some switches, link might be already up at this point.
          * Because of this weird behavior, when we enable laser,
@@ -3749,101 +3738,19 @@ static int s2io_open(struct net_device *dev)
         if (err) {
                 DBG_PRINT(ERR_DBG, "%s: H/W initialization failed\n",
                           dev->name);
-                if (err == -ENODEV)
-                        goto hw_init_failed;
-                else
-                        goto hw_enable_failed;
-        }
-
-        /* Store the values of the MSIX table in the nic_t structure */
-        store_xmsi_data(sp);
-
-        /* After proper initialization of H/W, register ISR */
-        if (sp->intr_type == MSI) {
-                err = request_irq((int) sp->pdev->irq, s2io_msi_handle, 
-                        IRQF_SHARED, sp->name, dev);
-                if (err) {
-                        DBG_PRINT(ERR_DBG, "%s: MSI registration \
-failed\n", dev->name);
-                        goto isr_registration_failed;
-                }
-        }
-        if (sp->intr_type == MSI_X) {
-                int i;
-
-                for (i=1; (sp->s2io_entries[i].in_use == MSIX_FLG); i++) {
-                        if (sp->s2io_entries[i].type == MSIX_FIFO_TYPE) {
-                                sprintf(sp->desc1, "%s:MSI-X-%d-TX",
-                                        dev->name, i);
-                                err = request_irq(sp->entries[i].vector,
-                                          s2io_msix_fifo_handle, 0, sp->desc1,
-                                          sp->s2io_entries[i].arg);
-                                DBG_PRINT(ERR_DBG, "%s @ 0x%llx\n", sp->desc1, 
-                                    (unsigned long long)sp->msix_info[i].addr);
-                        } else {
-                                sprintf(sp->desc2, "%s:MSI-X-%d-RX",
-                                        dev->name, i);
-                                err = request_irq(sp->entries[i].vector,
-                                          s2io_msix_ring_handle, 0, sp->desc2,
-                                          sp->s2io_entries[i].arg);
-                                DBG_PRINT(ERR_DBG, "%s @ 0x%llx\n", sp->desc2, 
-                                     (unsigned long long)sp->msix_info[i].addr);
-                        }
-                        if (err) {
-                                DBG_PRINT(ERR_DBG, "%s: MSI-X-%d registration \
-failed\n", dev->name, i);
-                                DBG_PRINT(ERR_DBG, "Returned: %d\n", err);
-                                goto isr_registration_failed;
-                        }
-                        sp->s2io_entries[i].in_use = MSIX_REGISTERED_SUCCESS;
-                }
-        }
-        if (sp->intr_type == INTA) {
-                err = request_irq((int) sp->pdev->irq, s2io_isr, IRQF_SHARED,
-                                sp->name, dev);
-                if (err) {
-                        DBG_PRINT(ERR_DBG, "%s: ISR registration failed\n",
-                                  dev->name);
-                        goto isr_registration_failed;
-                }
+                goto hw_init_failed;
         }
 
         if (s2io_set_mac_addr(dev, dev->dev_addr) == FAILURE) {
                 DBG_PRINT(ERR_DBG, "Set Mac Address Failed\n");
+                s2io_card_down(sp);
                 err = -ENODEV;
-                goto setting_mac_address_failed;
+                goto hw_init_failed;
         }
 
         netif_start_queue(dev);
         return 0;
 
-setting_mac_address_failed:
-        if (sp->intr_type != MSI_X)
-                free_irq(sp->pdev->irq, dev);
-isr_registration_failed:
-        del_timer_sync(&sp->alarm_timer);
-        if (sp->intr_type == MSI_X) {
-                int i;
-                u16 msi_control; /* Temp variable */
-
-                for (i=1; (sp->s2io_entries[i].in_use == 
-                                MSIX_REGISTERED_SUCCESS); i++) {
-                        int vector = sp->entries[i].vector;
-                        void *arg = sp->s2io_entries[i].arg;
-
-                        free_irq(vector, arg);
-                }
-                pci_disable_msix(sp->pdev);
-
-                /* Temp */
-                pci_read_config_word(sp->pdev, 0x42, &msi_control);
-                msi_control &= 0xFFFE; /* Disable MSI */
-                pci_write_config_word(sp->pdev, 0x42, msi_control);
-        }
-        else if (sp->intr_type == MSI)
-                pci_disable_msi(sp->pdev);
-hw_enable_failed:
-        s2io_reset(sp);
 hw_init_failed:
         if (sp->intr_type == MSI_X) {
                 if (sp->entries)
@@ -3874,7 +3781,7 @@ static int s2io_close(struct net_device *dev)
         flush_scheduled_work();
         netif_stop_queue(dev);
         /* Reset card, kill tasklet and free Tx and Rx buffers. */
-        s2io_card_down(sp, 1);
+        s2io_card_down(sp);
 
         sp->device_close_flag = TRUE;   /* Device is shut down. */
         return 0;
@@ -5919,7 +5826,7 @@ static int s2io_change_mtu(struct net_device *dev, int new_mtu)
 
         dev->mtu = new_mtu;
         if (netif_running(dev)) {
-                s2io_card_down(sp, 0);
+                s2io_card_down(sp);
                 netif_stop_queue(dev);
                 if (s2io_card_up(sp)) {
                         DBG_PRINT(ERR_DBG, "%s: Device bring up failed\n",
@@ -6216,43 +6123,106 @@ static  int rxd_owner_bit_reset(nic_t *sp)
 
 }
 
-static void s2io_card_down(nic_t * sp, int flag)
+static int s2io_add_isr(nic_t * sp)
 {
-        int cnt = 0;
-        XENA_dev_config_t __iomem *bar0 = sp->bar0;
-        unsigned long flags;
-        register u64 val64 = 0;
+        int ret = 0;
         struct net_device *dev = sp->dev;
+        int err = 0;
 
-        del_timer_sync(&sp->alarm_timer);
-        /* If s2io_set_link task is executing, wait till it completes. */
-        while (test_and_set_bit(0, &(sp->link_state))) {
-                msleep(50);
+        if (sp->intr_type == MSI)
+                ret = s2io_enable_msi(sp);
+        else if (sp->intr_type == MSI_X)
+                ret = s2io_enable_msi_x(sp);
+        if (ret) {
+                DBG_PRINT(ERR_DBG, "%s: Defaulting to INTA\n", dev->name);
+                sp->intr_type = INTA;
         }
-        atomic_set(&sp->card_state, CARD_DOWN);
 
-        /* disable Tx and Rx traffic on the NIC */
-        stop_nic(sp);
-        if (flag) {
-                if (sp->intr_type == MSI_X) {
-                        int i;
-                        u16 msi_control;
+        /* Store the values of the MSIX table in the nic_t structure */
+        store_xmsi_data(sp);
 
-                        for (i=1; (sp->s2io_entries[i].in_use ==
-                                MSIX_REGISTERED_SUCCESS); i++) {
-                                int vector = sp->entries[i].vector;
-                                void *arg = sp->s2io_entries[i].arg;
+        /* After proper initialization of H/W, register ISR */
+        if (sp->intr_type == MSI) {
+                err = request_irq((int) sp->pdev->irq, s2io_msi_handle,
+                        IRQF_SHARED, sp->name, dev);
+                if (err) {
+                        pci_disable_msi(sp->pdev);
+                        DBG_PRINT(ERR_DBG, "%s: MSI registration failed\n",
+                                  dev->name);
+                        return -1;
+                }
+        }
+        if (sp->intr_type == MSI_X) {
+                int i;
 
-                                free_irq(vector, arg);
+                for (i=1; (sp->s2io_entries[i].in_use == MSIX_FLG); i++) {
+                        if (sp->s2io_entries[i].type == MSIX_FIFO_TYPE) {
+                                sprintf(sp->desc[i], "%s:MSI-X-%d-TX",
+                                        dev->name, i);
+                                err = request_irq(sp->entries[i].vector,
+                                          s2io_msix_fifo_handle, 0, sp->desc[i],
+                                                  sp->s2io_entries[i].arg);
+                                DBG_PRINT(ERR_DBG, "%s @ 0x%llx\n", sp->desc[i],
+                                (unsigned long long)sp->msix_info[i].addr);
+                        } else {
+                                sprintf(sp->desc[i], "%s:MSI-X-%d-RX",
+                                        dev->name, i);
+                                err = request_irq(sp->entries[i].vector,
+                                          s2io_msix_ring_handle, 0, sp->desc[i],
+                                                  sp->s2io_entries[i].arg);
+                                DBG_PRINT(ERR_DBG, "%s @ 0x%llx\n", sp->desc[i],
+                                (unsigned long long)sp->msix_info[i].addr);
                         }
-                        pci_read_config_word(sp->pdev, 0x42, &msi_control);
-                        msi_control &= 0xFFFE; /* Disable MSI */
-                        pci_write_config_word(sp->pdev, 0x42, msi_control);
-                        pci_disable_msix(sp->pdev);
-                } else {
-                        free_irq(sp->pdev->irq, dev);
-                        if (sp->intr_type == MSI)
-                                pci_disable_msi(sp->pdev);
+                        if (err) {
+                                DBG_PRINT(ERR_DBG,"%s:MSI-X-%d registration "
+                                          "failed\n", dev->name, i);
+                                DBG_PRINT(ERR_DBG, "Returned: %d\n", err);
+                                return -1;
+                        }
+                        sp->s2io_entries[i].in_use = MSIX_REGISTERED_SUCCESS;
+                }
+        }
+        if (sp->intr_type == INTA) {
+                err = request_irq((int) sp->pdev->irq, s2io_isr, IRQF_SHARED,
+                                sp->name, dev);
+                if (err) {
+                        DBG_PRINT(ERR_DBG, "%s: ISR registration failed\n",
+                                  dev->name);
+                        return -1;
+                }
+        }
+        return 0;
+}
+static void s2io_rem_isr(nic_t * sp)
+{
+        int cnt = 0;
+        struct net_device *dev = sp->dev;
+
+        if (sp->intr_type == MSI_X) {
+                int i;
+                u16 msi_control;
+
+                for (i=1; (sp->s2io_entries[i].in_use ==
+                        MSIX_REGISTERED_SUCCESS); i++) {
+                        int vector = sp->entries[i].vector;
+                        void *arg = sp->s2io_entries[i].arg;
+
+                        free_irq(vector, arg);
+                }
+                pci_read_config_word(sp->pdev, 0x42, &msi_control);
+                msi_control &= 0xFFFE; /* Disable MSI */
+                pci_write_config_word(sp->pdev, 0x42, msi_control);
+
+                pci_disable_msix(sp->pdev);
+        } else {
+                free_irq(sp->pdev->irq, dev);
+                if (sp->intr_type == MSI) {
+                        u16 val;
+
+                        pci_disable_msi(sp->pdev);
+                        pci_read_config_word(sp->pdev, 0x4c, &val);
+                        val ^= 0x1;
+                        pci_write_config_word(sp->pdev, 0x4c, val);
                 }
         }
         /* Waiting till all Interrupt handlers are complete */
@@ -6263,6 +6233,26 @@ static void s2io_card_down(nic_t * sp, int flag)
                         break;
                 cnt++;
         } while(cnt < 5);
+}
+
+static void s2io_card_down(nic_t * sp)
+{
+        int cnt = 0;
+        XENA_dev_config_t __iomem *bar0 = sp->bar0;
+        unsigned long flags;
+        register u64 val64 = 0;
+
+        del_timer_sync(&sp->alarm_timer);
+        /* If s2io_set_link task is executing, wait till it completes. */
+        while (test_and_set_bit(0, &(sp->link_state))) {
+                msleep(50);
+        }
+        atomic_set(&sp->card_state, CARD_DOWN);
+
+        /* disable Tx and Rx traffic on the NIC */
+        stop_nic(sp);
+
+        s2io_rem_isr(sp);
 
         /* Kill tasklet. */
         tasklet_kill(&sp->task);
@@ -6314,23 +6304,16 @@ static int s2io_card_up(nic_t * sp)
         mac_info_t *mac_control;
         struct config_param *config;
         struct net_device *dev = (struct net_device *) sp->dev;
+        u16 interruptible;
 
         /* Initialize the H/W I/O registers */
         if (init_nic(sp) != 0) {
                 DBG_PRINT(ERR_DBG, "%s: H/W initialization failed\n",
                           dev->name);
+                s2io_reset(sp);
                 return -ENODEV;
         }
 
-        if (sp->intr_type == MSI)
-                ret = s2io_enable_msi(sp);
-        else if (sp->intr_type == MSI_X)
-                ret = s2io_enable_msi_x(sp);
-        if (ret) {
-                DBG_PRINT(ERR_DBG, "%s: Defaulting to INTA\n", dev->name);
-                sp->intr_type = INTA;
-        }
-
         /*
          * Initializing the Rx buffers. For now we are considering only 1
          * Rx ring and initializing buffers into 30 Rx blocks
@@ -6361,21 +6344,39 @@ static int s2io_card_up(nic_t * sp)
                         sp->lro_max_aggr_per_sess = lro_max_pkts;
         }
 
-        /* Enable tasklet for the device */
-        tasklet_init(&sp->task, s2io_tasklet, (unsigned long) dev);
-
         /* Enable Rx Traffic and interrupts on the NIC */
         if (start_nic(sp)) {
                 DBG_PRINT(ERR_DBG, "%s: Starting NIC failed\n", dev->name);
-                tasklet_kill(&sp->task);
                 s2io_reset(sp);
-                free_irq(dev->irq, dev);
+                free_rx_buffers(sp);
+                return -ENODEV;
+        }
+
+        /* Add interrupt service routine */
+        if (s2io_add_isr(sp) != 0) {
+                if (sp->intr_type == MSI_X)
+                        s2io_rem_isr(sp);
+                s2io_reset(sp);
                 free_rx_buffers(sp);
                 return -ENODEV;
         }
 
         S2IO_TIMER_CONF(sp->alarm_timer, s2io_alarm_handle, sp, (HZ/2));
 
+        /* Enable tasklet for the device */
+        tasklet_init(&sp->task, s2io_tasklet, (unsigned long) dev);
+
+        /*  Enable select interrupts */
+        if (sp->intr_type != INTA)
+                en_dis_able_nic_intrs(sp, ENA_ALL_INTRS, DISABLE_INTRS);
+        else {
+                interruptible = TX_TRAFFIC_INTR | RX_TRAFFIC_INTR;
+                interruptible |= TX_PIC_INTR | RX_PIC_INTR;
+                interruptible |= TX_MAC_INTR | RX_MAC_INTR;
+                en_dis_able_nic_intrs(sp, interruptible, ENABLE_INTRS);
+        }
+
+
         atomic_set(&sp->card_state, CARD_UP);
         return 0;
 }
@@ -6395,7 +6396,7 @@ static void s2io_restart_nic(unsigned long data)
         struct net_device *dev = (struct net_device *) data;
         nic_t *sp = dev->priv;
 
-        s2io_card_down(sp, 0);
+        s2io_card_down(sp);
         if (s2io_card_up(sp)) {
                 DBG_PRINT(ERR_DBG, "%s: Device bring up failed\n",
                           dev->name);
diff --git a/drivers/net/s2io.h b/drivers/net/s2io.h
index c43f52179708..217097bc22f1 100644
--- a/drivers/net/s2io.h
+++ b/drivers/net/s2io.h
@@ -829,8 +829,7 @@ struct s2io_nic {
 #define MSIX_FLG                0xA5
         struct msix_entry *entries;
         struct s2io_msix_entry *s2io_entries;
-        char desc1[35];
-        char desc2[35];
+        char desc[MAX_REQUESTED_MSI_X][25];
 
         int avail_msix_vectors; /* No. of MSI-X vectors granted by system */
 
@@ -1002,7 +1001,7 @@ static int verify_xena_quiescence(nic_t *sp, u64 val64, int flag);
 static struct ethtool_ops netdev_ethtool_ops;
 static void s2io_set_link(unsigned long data);
 static int s2io_set_swapper(nic_t * sp);
-static void s2io_card_down(nic_t *nic, int flag);
+static void s2io_card_down(nic_t *nic);
 static int s2io_card_up(nic_t *nic);
 static int get_xena_rev_id(struct pci_dev *pdev);
 static void restore_xmsi_data(nic_t *nic);
diff --git a/drivers/net/sk98lin/h/xmac_ii.h b/drivers/net/sk98lin/h/xmac_ii.h
index 2b19f8ad0318..7f8e6d0084c7 100644
--- a/drivers/net/sk98lin/h/xmac_ii.h
+++ b/drivers/net/sk98lin/h/xmac_ii.h
@@ -1473,7 +1473,7 @@ extern "C" {
 #define GM_TXCR_FORCE_JAM       (1<<15) /* Bit 15:      Force Jam / Flow-Control */
 #define GM_TXCR_CRC_DIS         (1<<14) /* Bit 14:      Disable insertion of CRC */
 #define GM_TXCR_PAD_DIS         (1<<13) /* Bit 13:      Disable padding of packets */
-#define GM_TXCR_COL_THR_MSK     (1<<10) /* Bit 12..10:  Collision Threshold */
+#define GM_TXCR_COL_THR_MSK     (7<<10) /* Bit 12..10:  Collision Threshold */
 
 #define TX_COL_THR(x)           (SHIFT10(x) & GM_TXCR_COL_THR_MSK)
 
diff --git a/drivers/net/skge.h b/drivers/net/skge.h
index ed19ff47ce11..593387b3c0dd 100644
--- a/drivers/net/skge.h
+++ b/drivers/net/skge.h
@@ -1734,11 +1734,11 @@ enum {
         GM_TXCR_FORCE_JAM       = 1<<15, /* Bit 15:     Force Jam / Flow-Control */
         GM_TXCR_CRC_DIS         = 1<<14, /* Bit 14:     Disable insertion of CRC */
         GM_TXCR_PAD_DIS         = 1<<13, /* Bit 13:     Disable padding of packets */
-        GM_TXCR_COL_THR_MSK     = 1<<10, /* Bit 12..10: Collision Threshold */
+        GM_TXCR_COL_THR_MSK     = 7<<10, /* Bit 12..10: Collision Threshold */
 };
 
 #define TX_COL_THR(x)           (((x)<<10) & GM_TXCR_COL_THR_MSK)
-#define TX_COL_DEF              0x04
+#define TX_COL_DEF              0x04    /* late collision after 64 byte */
 
 /*      GM_RX_CTRL                      16 bit r/w      Receive Control Register */
 enum {
diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index 31093760aa1e..d98f28c34e5c 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -65,6 +65,7 @@
 #define RX_MAX_PENDING          (RX_LE_SIZE/2 - 2)
 #define RX_DEF_PENDING          RX_MAX_PENDING
 #define RX_SKB_ALIGN            8
+#define RX_BUF_WRITE            16
 
 #define TX_RING_SIZE            512
 #define TX_DEF_PENDING          (TX_RING_SIZE - 1)
@@ -234,7 +235,6 @@ static void sky2_set_power_state(struct sky2_hw *hw, pci_power_t state)
                 }
 
                 if (hw->chip_id == CHIP_ID_YUKON_EC_U) {
-                        sky2_write16(hw, B0_CTST, Y2_HW_WOL_ON);
                         sky2_pci_write32(hw, PCI_DEV_REG3, 0);
                         reg1 = sky2_pci_read32(hw, PCI_DEV_REG4);
                         reg1 &= P_ASPM_CONTROL_MSK;
@@ -243,6 +243,7 @@ static void sky2_set_power_state(struct sky2_hw *hw, pci_power_t state)
                 }
 
                 sky2_pci_write32(hw, PCI_DEV_REG1, reg1);
+                udelay(100);
 
                 break;
 
@@ -255,6 +256,7 @@ static void sky2_set_power_state(struct sky2_hw *hw, pci_power_t state)
                 else
                         reg1 |= (PCI_Y2_PHY1_POWD | PCI_Y2_PHY2_POWD);
                 sky2_pci_write32(hw, PCI_DEV_REG1, reg1);
+                udelay(100);
 
                 if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev > 1)
                         sky2_write8(hw, B2_Y2_CLK_GATE, 0);
@@ -1389,7 +1391,7 @@ static void sky2_tx_complete(struct sky2_port *sky2, u16 done)
         }
 
         sky2->tx_cons = put;
-        if (tx_avail(sky2) > MAX_SKB_TX_LE)
+        if (tx_avail(sky2) > MAX_SKB_TX_LE + 4)
                 netif_wake_queue(dev);
 }
 
@@ -1888,9 +1890,6 @@ resubmit:
         re->skb->ip_summed = CHECKSUM_NONE;
         sky2_rx_add(sky2, re->mapaddr);
 
-        /* Tell receiver about new buffers. */
-        sky2_put_idx(sky2->hw, rxqaddr[sky2->port], sky2->rx_put);
-
         return skb;
 
 oversize:
@@ -1937,7 +1936,9 @@ static inline int sky2_more_work(const struct sky2_hw *hw)
 /* Process status response ring */
 static int sky2_status_intr(struct sky2_hw *hw, int to_do)
 {
+        struct sky2_port *sky2;
         int work_done = 0;
+        unsigned buf_write[2] = { 0, 0 };
         u16 hwidx = sky2_read16(hw, STAT_PUT_IDX);
 
         rmb();
@@ -1945,7 +1946,6 @@ static int sky2_status_intr(struct sky2_hw *hw, int to_do)
         while (hw->st_idx != hwidx) {
                 struct sky2_status_le *le  = hw->st_le + hw->st_idx;
                 struct net_device *dev;
-                struct sky2_port *sky2;
                 struct sk_buff *skb;
                 u32 status;
                 u16 length;
@@ -1978,6 +1978,14 @@ static int sky2_status_intr(struct sky2_hw *hw, int to_do)
 #endif
                                 netif_receive_skb(skb);
 
+                        /* Update receiver after 16 frames */
+                        if (++buf_write[le->link] == RX_BUF_WRITE) {
+                                sky2_put_idx(hw, rxqaddr[le->link],
+                                             sky2->rx_put);
+                                buf_write[le->link] = 0;
+                        }
+
+                        /* Stop after net poll weight */
                         if (++work_done >= to_do)
                                 goto exit_loop;
                         break;
@@ -2016,6 +2024,16 @@ static int sky2_status_intr(struct sky2_hw *hw, int to_do)
         }
 
 exit_loop:
+        if (buf_write[0]) {
+                sky2 = netdev_priv(hw->dev[0]);
+                sky2_put_idx(hw, Q_R1, sky2->rx_put);
+        }
+
+        if (buf_write[1]) {
+                sky2 = netdev_priv(hw->dev[1]);
+                sky2_put_idx(hw, Q_R2, sky2->rx_put);
+        }
+
         return work_done;
 }
 
@@ -2286,7 +2304,7 @@ static inline u32 sky2_clk2us(const struct sky2_hw *hw, u32 clk)
 }
 
 
-static int __devinit sky2_reset(struct sky2_hw *hw)
+static int sky2_reset(struct sky2_hw *hw)
 {
         u16 status;
         u8 t8, pmd_type;
@@ -3437,17 +3455,14 @@ static int sky2_suspend(struct pci_dev *pdev, pm_message_t state)
                 return -EINVAL;
 
         del_timer_sync(&hw->idle_timer);
+        netif_poll_disable(hw->dev[0]);
 
         for (i = 0; i < hw->ports; i++) {
                 struct net_device *dev = hw->dev[i];
 
-                if (dev) {
-                        if (!netif_running(dev))
-                                continue;
-
+                if (netif_running(dev)) {
                         sky2_down(dev);
                         netif_device_detach(dev);
-                        netif_poll_disable(dev);
                 }
         }
 
@@ -3474,9 +3489,8 @@ static int sky2_resume(struct pci_dev *pdev)
 
         for (i = 0; i < hw->ports; i++) {
                 struct net_device *dev = hw->dev[i];
-                if (dev && netif_running(dev)) {
+                if (netif_running(dev)) {
                         netif_device_attach(dev);
-                        netif_poll_enable(dev);
 
                         err = sky2_up(dev);
                         if (err) {
@@ -3488,6 +3502,7 @@ static int sky2_resume(struct pci_dev *pdev)
                 }
         }
 
+        netif_poll_enable(hw->dev[0]);
         sky2_idle_start(hw);
 out:
         return err;
diff --git a/drivers/net/sky2.h b/drivers/net/sky2.h
index 8a0bc5525f0a..2db8d19b22d1 100644
--- a/drivers/net/sky2.h
+++ b/drivers/net/sky2.h
@@ -1480,7 +1480,7 @@ enum {
         GM_TXCR_FORCE_JAM       = 1<<15, /* Bit 15:     Force Jam / Flow-Control */
         GM_TXCR_CRC_DIS         = 1<<14, /* Bit 14:     Disable insertion of CRC */
         GM_TXCR_PAD_DIS         = 1<<13, /* Bit 13:     Disable padding of packets */
-        GM_TXCR_COL_THR_MSK     = 1<<10, /* Bit 12..10: Collision Threshold */
+        GM_TXCR_COL_THR_MSK     = 7<<10, /* Bit 12..10: Collision Threshold */
 };
 
 #define TX_COL_THR(x)           (((x)<<10) & GM_TXCR_COL_THR_MSK)
diff --git a/drivers/net/smc91x.h b/drivers/net/smc91x.h
index b4028049ed76..4ec4b4d23ae5 100644
--- a/drivers/net/smc91x.h
+++ b/drivers/net/smc91x.h
@@ -354,6 +354,24 @@ static inline void LPD7_SMC_outsw (unsigned char* a, int r,
 
 #define SMC_IRQ_FLAGS           (0)
 
+#elif   defined(CONFIG_ARCH_VERSATILE)
+
+#define SMC_CAN_USE_8BIT        1
+#define SMC_CAN_USE_16BIT       1
+#define SMC_CAN_USE_32BIT       1
+#define SMC_NOWAIT              1
+
+#define SMC_inb(a, r)           readb((a) + (r))
+#define SMC_inw(a, r)           readw((a) + (r))
+#define SMC_inl(a, r)           readl((a) + (r))
+#define SMC_outb(v, a, r)       writeb(v, (a) + (r))
+#define SMC_outw(v, a, r)       writew(v, (a) + (r))
+#define SMC_outl(v, a, r)       writel(v, (a) + (r))
+#define SMC_insl(a, r, p, l)    readsl((a) + (r), p, l)
+#define SMC_outsl(a, r, p, l)   writesl((a) + (r), p, l)
+
+#define SMC_IRQ_FLAGS           (0)
+
 #else
 
 #define SMC_CAN_USE_8BIT        1
diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_main.c b/drivers/net/wireless/bcm43xx/bcm43xx_main.c
index e1c5a939bca4..3889f79e7128 100644
--- a/drivers/net/wireless/bcm43xx/bcm43xx_main.c
+++ b/drivers/net/wireless/bcm43xx/bcm43xx_main.c
@@ -1547,7 +1547,7 @@ static void handle_irq_noise(struct bcm43xx_private *bcm)
                 goto generate_new;
 
         /* Get the noise samples. */
-        assert(bcm->noisecalc.nr_samples <= 8);
+        assert(bcm->noisecalc.nr_samples < 8);
         i = bcm->noisecalc.nr_samples;
         noise[0] = limit_value(noise[0], 0, ARRAY_SIZE(radio->nrssi_lt) - 1);
         noise[1] = limit_value(noise[1], 0, ARRAY_SIZE(radio->nrssi_lt) - 1);
diff --git a/drivers/net/wireless/zd1211rw/zd_usb.c b/drivers/net/wireless/zd1211rw/zd_usb.c
index ce1cb2c6aa8d..72f90525bf68 100644
--- a/drivers/net/wireless/zd1211rw/zd_usb.c
+++ b/drivers/net/wireless/zd1211rw/zd_usb.c
@@ -375,10 +375,8 @@ static void int_urb_complete(struct urb *urb, struct pt_regs *pt_regs)
         case -ENODEV:
         case -ENOENT:
         case -ECONNRESET:
-                goto kfree;
         case -EPIPE:
-                usb_clear_halt(urb->dev, EP_INT_IN);
-                /* FALL-THROUGH */
+                goto kfree;
         default:
                 goto resubmit;
         }
@@ -580,10 +578,8 @@ static void rx_urb_complete(struct urb *urb, struct pt_regs *pt_regs)
         case -ENODEV:
         case -ENOENT:
         case -ECONNRESET:
-                return;
         case -EPIPE:
-                usb_clear_halt(urb->dev, EP_DATA_IN);
-                /* FALL-THROUGH */
+                return;
         default:
                 dev_dbg_f(urb_dev(urb), "urb %p error %d\n", urb, urb->status);
                 goto resubmit;
@@ -749,11 +745,9 @@ static void tx_urb_complete(struct urb *urb, struct pt_regs *pt_regs)
         case -ENODEV:
         case -ENOENT:
         case -ECONNRESET:
+        case -EPIPE:
                 dev_dbg_f(urb_dev(urb), "urb %p error %d\n", urb, urb->status);
                 break;
-        case -EPIPE:
-                usb_clear_halt(urb->dev, EP_DATA_OUT);
-                /* FALL-THROUGH */
         default:
                 dev_dbg_f(urb_dev(urb), "urb %p error %d\n", urb, urb->status);
                 goto resubmit;
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index cf57d7de3765..9f79dd6d51ab 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -19,6 +19,7 @@
 #include <asm/dma.h>    /* isa_dma_bridge_buggy */
 #include "pci.h"
 
+unsigned int pci_pm_d3_delay = 10;
 
 /**
  * pci_bus_max_busnr - returns maximum PCI bus number of given bus' children
@@ -313,6 +314,14 @@ pci_set_power_state(struct pci_dev *dev, pci_power_t state)
         } else if (dev->current_state == state)
                 return 0;        /* we're already there */
 
+        /*
+         * If the device or the parent bridge can't support PCI PM, ignore
+         * the request if we're doing anything besides putting it into D0
+         * (which would only happen on boot).
+         */
+        if ((state == PCI_D1 || state == PCI_D2) && pci_no_d1d2(dev))
+                return 0;
+
         /* find PCI PM capability in list */
         pm = pci_find_capability(dev, PCI_CAP_ID_PM);
         
@@ -363,7 +372,7 @@ pci_set_power_state(struct pci_dev *dev, pci_power_t state)
         /* Mandatory power management transition delays */
         /* see PCI PM 1.1 5.6.1 table 18 */
         if (state == PCI_D3hot || dev->current_state == PCI_D3hot)
-                msleep(10);
+                msleep(pci_pm_d3_delay);
         else if (state == PCI_D2 || dev->current_state == PCI_D2)
                 udelay(200);
 
diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
index 9cc842b666eb..08d58fc78ee1 100644
--- a/drivers/pci/pci.h
+++ b/drivers/pci/pci.h
@@ -47,7 +47,7 @@ extern int pci_msi_quirk;
 #else
 #define pci_msi_quirk 0
 #endif
-
+extern unsigned int pci_pm_d3_delay;
 #ifdef CONFIG_PCI_MSI
 void disable_msi_mode(struct pci_dev *dev, int pos, int type);
 void pci_no_msi(void);
@@ -66,7 +66,15 @@ static inline int pci_save_msix_state(struct pci_dev *dev) { return 0; }
 static inline void pci_restore_msi_state(struct pci_dev *dev) {}
 static inline void pci_restore_msix_state(struct pci_dev *dev) {}
 #endif
+static inline int pci_no_d1d2(struct pci_dev *dev)
+{
+        unsigned int parent_dstates = 0;
 
+        if (dev->bus->self)
+                parent_dstates = dev->bus->self->no_d1d2;
+        return (dev->no_d1d2 || parent_dstates);
+
+}
 extern int pcie_mch_quirk;
 extern struct device_attribute pci_dev_attrs[];
 extern struct class_device_attribute class_device_attr_cpuaffinity;
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index de3bbc88fb26..e3c78c39b7e4 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -683,6 +683,33 @@ static void __devinit quirk_vt82c598_id(struct pci_dev *dev)
 }
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA,     PCI_DEVICE_ID_VIA_82C597_0,     quirk_vt82c598_id );
 
+#ifdef CONFIG_ACPI_SLEEP
+
+/*
+ * Some VIA systems boot with the abnormal status flag set. This can cause
+ * the BIOS to re-POST the system on resume rather than passing control
+ * back to the OS.  Clear the flag on boot
+ */
+static void __devinit quirk_via_abnormal_poweroff(struct pci_dev *dev)
+{
+        u32 reg;
+
+        acpi_hw_register_read(ACPI_MTX_DO_NOT_LOCK, ACPI_REGISTER_PM1_STATUS,
+                                &reg);
+
+        if (reg & 0x800) {
+                printk("Clearing abnormal poweroff flag\n");
+                acpi_hw_register_write(ACPI_MTX_DO_NOT_LOCK,
+                                        ACPI_REGISTER_PM1_STATUS,
+                                        (u16)0x800);
+        }
+}
+
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235, quirk_via_abnormal_poweroff);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, quirk_via_abnormal_poweroff);
+
+#endif
+
 /*
  * CardBus controllers have a legacy base address that enables them
  * to respond as i82365 pcmcia controllers.  We don't want them to
@@ -1391,6 +1418,37 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL,	PCI_DEVICE_ID_INTEL_PXH_0,	quirk_pc
 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL,    PCI_DEVICE_ID_INTEL_PXH_1,      quirk_pcie_pxh);
 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL,    PCI_DEVICE_ID_INTEL_PXHV,       quirk_pcie_pxh);
 
+/*
+ * Some Intel PCI Express chipsets have trouble with downstream
+ * device power management.
+ */
+static void quirk_intel_pcie_pm(struct pci_dev * dev)
+{
+        pci_pm_d3_delay = 120;
+        dev->no_d1d2 = 1;
+}
+
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL,    0x25e2, quirk_intel_pcie_pm);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL,    0x25e3, quirk_intel_pcie_pm);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL,    0x25e4, quirk_intel_pcie_pm);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL,    0x25e5, quirk_intel_pcie_pm);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL,    0x25e6, quirk_intel_pcie_pm);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL,    0x25e7, quirk_intel_pcie_pm);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL,    0x25f7, quirk_intel_pcie_pm);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL,    0x25f8, quirk_intel_pcie_pm);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL,    0x25f9, quirk_intel_pcie_pm);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL,    0x25fa, quirk_intel_pcie_pm);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL,    0x2601, quirk_intel_pcie_pm);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL,    0x2602, quirk_intel_pcie_pm);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL,    0x2603, quirk_intel_pcie_pm);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL,    0x2604, quirk_intel_pcie_pm);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL,    0x2605, quirk_intel_pcie_pm);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL,    0x2606, quirk_intel_pcie_pm);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL,    0x2607, quirk_intel_pcie_pm);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL,    0x2608, quirk_intel_pcie_pm);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL,    0x2609, quirk_intel_pcie_pm);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL,    0x260a, quirk_intel_pcie_pm);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL,    0x260b, quirk_intel_pcie_pm);
 
 /*
  * Fixup the cardbus bridges on the IBM Dock II docking station
diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig
index 7fdbc5dad5fd..2ee742d40c43 100644
--- a/drivers/usb/Kconfig
+++ b/drivers/usb/Kconfig
@@ -23,6 +23,7 @@ config USB_ARCH_HAS_OHCI
         default y if ARCH_LH7A404
         default y if ARCH_S3C2410
         default y if PXA27x
+        default y if ARCH_EP93XX
         default y if ARCH_AT91RM9200
         # PPC:
         default y if STB03xxx
diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile
index c7123bf71c58..4710eb02ed64 100644
--- a/drivers/usb/Makefile
+++ b/drivers/usb/Makefile
@@ -48,7 +48,7 @@ obj-$(CONFIG_USB_MICROTEK)	+= image/
 obj-$(CONFIG_USB_SERIAL)        += serial/
 
 obj-$(CONFIG_USB_AUERSWALD)     += misc/
-obj-$(CONFIG_USB_CY7C63)        += misc/
+obj-$(CONFIG_USB_CYPRESS_CY7C63)+= misc/
 obj-$(CONFIG_USB_CYTHERM)       += misc/
 obj-$(CONFIG_USB_EMI26)         += misc/
 obj-$(CONFIG_USB_EMI62)         += misc/
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index 3670d77e912c..ca90326f2f5c 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -291,13 +291,13 @@ static void acm_read_bulk(struct urb *urb, struct pt_regs *regs)
         struct acm_ru *rcv = urb->context;
         struct acm *acm = rcv->instance;
         int status = urb->status;
-        dbg("Entering acm_read_bulk with status %d\n", urb->status);
+        dbg("Entering acm_read_bulk with status %d", urb->status);
 
         if (!ACM_READY(acm))
                 return;
 
         if (status)
-                dev_dbg(&acm->data->dev, "bulk rx status %d\n", status);
+                dev_dbg(&acm->data->dev, "bulk rx status %d", status);
 
         buf = rcv->buffer;
         buf->size = urb->actual_length;
@@ -343,7 +343,7 @@ next_buffer:
         list_del(&buf->list);
         spin_unlock(&acm->read_lock);
 
-        dbg("acm_rx_tasklet: procesing buf 0x%p, size = %d\n", buf, buf->size);
+        dbg("acm_rx_tasklet: procesing buf 0x%p, size = %d", buf, buf->size);
 
         tty_buffer_request_room(tty, buf->size);
         if (!acm->throttle)
@@ -394,7 +394,7 @@ urbs:
                 rcv->urb->transfer_dma = buf->dma;
                 rcv->urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
 
-                dbg("acm_rx_tasklet: sending urb 0x%p, rcv 0x%p, buf 0x%p\n", rcv->urb, rcv, buf);
+                dbg("acm_rx_tasklet: sending urb 0x%p, rcv 0x%p, buf 0x%p", rcv->urb, rcv, buf);
 
                 /* This shouldn't kill the driver as unsuccessful URBs are returned to the
                    free-urbs-pool and resubmited ASAP */
@@ -413,7 +413,7 @@ static void acm_write_bulk(struct urb *urb, struct pt_regs *regs)
 {
         struct acm *acm = (struct acm *)urb->context;
 
-        dbg("Entering acm_write_bulk with status %d\n", urb->status);
+        dbg("Entering acm_write_bulk with status %d", urb->status);
 
         acm_write_done(acm);
         acm_write_start(acm);
@@ -424,7 +424,7 @@ static void acm_write_bulk(struct urb *urb, struct pt_regs *regs)
 static void acm_softint(void *private)
 {
         struct acm *acm = private;
-        dbg("Entering acm_softint.\n");
+        dbg("Entering acm_softint.");
         
         if (!ACM_READY(acm))
                 return;
@@ -440,7 +440,7 @@ static int acm_tty_open(struct tty_struct *tty, struct file *filp)
         struct acm *acm;
         int rv = -EINVAL;
         int i;
-        dbg("Entering acm_tty_open.\n");
+        dbg("Entering acm_tty_open.");
 
         mutex_lock(&open_mutex);
 
@@ -541,7 +541,7 @@ static int acm_tty_write(struct tty_struct *tty, const unsigned char *buf, int c
         int wbn;
         struct acm_wb *wb;
 
-        dbg("Entering acm_tty_write to write %d bytes,\n", count);
+        dbg("Entering acm_tty_write to write %d bytes,", count);
 
         if (!ACM_READY(acm))
                 return -EINVAL;
@@ -793,7 +793,7 @@ static int acm_probe (struct usb_interface *intf,
 
         if (!buflen) {
                 if (intf->cur_altsetting->endpoint->extralen && intf->cur_altsetting->endpoint->extra) {
-                        dev_dbg(&intf->dev,"Seeking extra descriptors on endpoint\n");
+                        dev_dbg(&intf->dev,"Seeking extra descriptors on endpoint");
                         buflen = intf->cur_altsetting->endpoint->extralen;
                         buffer = intf->cur_altsetting->endpoint->extra;
                 } else {
@@ -842,24 +842,24 @@ next_desc:
 
         if (!union_header) {
                 if (call_interface_num > 0) {
-                        dev_dbg(&intf->dev,"No union descriptor, using call management descriptor\n");
+                        dev_dbg(&intf->dev,"No union descriptor, using call management descriptor");
                         data_interface = usb_ifnum_to_if(usb_dev, (data_interface_num = call_interface_num));
                         control_interface = intf;
                 } else {
-                        dev_dbg(&intf->dev,"No union descriptor, giving up\n");
+                        dev_dbg(&intf->dev,"No union descriptor, giving up");
                         return -ENODEV;
                 }
         } else {
                 control_interface = usb_ifnum_to_if(usb_dev, union_header->bMasterInterface0);
                 data_interface = usb_ifnum_to_if(usb_dev, (data_interface_num = union_header->bSlaveInterface0));
                 if (!control_interface || !data_interface) {
-                        dev_dbg(&intf->dev,"no interfaces\n");
+                        dev_dbg(&intf->dev,"no interfaces");
                         return -ENODEV;
                 }
         }
         
         if (data_interface_num != call_interface_num)
-                dev_dbg(&intf->dev,"Seperate call control interface. That is not fully supported.\n");
+                dev_dbg(&intf->dev,"Seperate call control interface. That is not fully supported.");
 
 skip_normal_probe:
 
@@ -867,7 +867,7 @@ skip_normal_probe:
         if (data_interface->cur_altsetting->desc.bInterfaceClass != CDC_DATA_INTERFACE_TYPE) {
                 if (control_interface->cur_altsetting->desc.bInterfaceClass == CDC_DATA_INTERFACE_TYPE) {
                         struct usb_interface *t;
-                        dev_dbg(&intf->dev,"Your device has switched interfaces.\n");
+                        dev_dbg(&intf->dev,"Your device has switched interfaces.");
 
                         t = control_interface;
                         control_interface = data_interface;
@@ -878,7 +878,7 @@ skip_normal_probe:
         }
         
         if (usb_interface_claimed(data_interface)) { /* valid in this context */
-                dev_dbg(&intf->dev,"The data interface isn't available\n");
+                dev_dbg(&intf->dev,"The data interface isn't available");
                 return -EBUSY;
         }
 
@@ -895,7 +895,7 @@ skip_normal_probe:
         if ((epread->bEndpointAddress & USB_DIR_IN) != USB_DIR_IN) {
                 /* descriptors are swapped */
                 struct usb_endpoint_descriptor *t;
-                dev_dbg(&intf->dev,"The data interface has switched endpoints\n");
+                dev_dbg(&intf->dev,"The data interface has switched endpoints");
                 
                 t = epread;
                 epread = epwrite;
@@ -910,7 +910,7 @@ skip_normal_probe:
         }
 
         if (!(acm = kzalloc(sizeof(struct acm), GFP_KERNEL))) {
-                dev_dbg(&intf->dev, "out of memory (acm kzalloc)\n");
+                dev_dbg(&intf->dev, "out of memory (acm kzalloc)");
                 goto alloc_fail;
         }
 
@@ -936,26 +936,26 @@ skip_normal_probe:
 
         buf = usb_buffer_alloc(usb_dev, ctrlsize, GFP_KERNEL, &acm->ctrl_dma);
         if (!buf) {
-                dev_dbg(&intf->dev, "out of memory (ctrl buffer alloc)\n");
+                dev_dbg(&intf->dev, "out of memory (ctrl buffer alloc)");
                 goto alloc_fail2;
         }
         acm->ctrl_buffer = buf;
 
         if (acm_write_buffers_alloc(acm) < 0) {
-                dev_dbg(&intf->dev, "out of memory (write buffer alloc)\n");
+                dev_dbg(&intf->dev, "out of memory (write buffer alloc)");
                 goto alloc_fail4;
         }
 
         acm->ctrlurb = usb_alloc_urb(0, GFP_KERNEL);
         if (!acm->ctrlurb) {
-                dev_dbg(&intf->dev, "out of memory (ctrlurb kmalloc)\n");
+                dev_dbg(&intf->dev, "out of memory (ctrlurb kmalloc)");
                 goto alloc_fail5;
         }
         for (i = 0; i < num_rx_buf; i++) {
                 struct acm_ru *rcv = &(acm->ru[i]);
 
                 if (!(rcv->urb = usb_alloc_urb(0, GFP_KERNEL))) {
-                        dev_dbg(&intf->dev, "out of memory (read urbs usb_alloc_urb)\n");
+                        dev_dbg(&intf->dev, "out of memory (read urbs usb_alloc_urb)");
                         goto alloc_fail7;
                 }
 
@@ -966,13 +966,13 @@ skip_normal_probe:
                 struct acm_rb *buf = &(acm->rb[i]);
 
                 if (!(buf->base = usb_buffer_alloc(acm->dev, readsize, GFP_KERNEL, &buf->dma))) {
-                        dev_dbg(&intf->dev, "out of memory (read bufs usb_buffer_alloc)\n");
+                        dev_dbg(&intf->dev, "out of memory (read bufs usb_buffer_alloc)");
                         goto alloc_fail7;
                 }
         }
         acm->writeurb = usb_alloc_urb(0, GFP_KERNEL);
         if (!acm->writeurb) {
-                dev_dbg(&intf->dev, "out of memory (writeurb kmalloc)\n");
+                dev_dbg(&intf->dev, "out of memory (writeurb kmalloc)");
                 goto alloc_fail7;
         }
 
@@ -1086,6 +1086,9 @@ static struct usb_device_id acm_ids[] = {
         { USB_DEVICE(0x0ace, 0x1608), /* ZyDAS 56K USB MODEM */
         .driver_info = SINGLE_RX_URB, /* firmware bug */
         },
+        { USB_DEVICE(0x0ace, 0x1611), /* ZyDAS 56K USB MODEM - new version */
+        .driver_info = SINGLE_RX_URB, /* firmware bug */
+        },
         /* control interfaces with various AT-command sets */
         { USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_ACM,
                 USB_CDC_ACM_PROTO_AT_V25TER) },
diff --git a/drivers/usb/core/Kconfig b/drivers/usb/core/Kconfig
index a08787e253aa..6e3b5358a760 100644
--- a/drivers/usb/core/Kconfig
+++ b/drivers/usb/core/Kconfig
@@ -31,9 +31,6 @@ config USB_DEVICEFS
           For the format of the various /proc/bus/usb/ files, please read
           <file:Documentation/usb/proc_usb_info.txt>.
 
-          Please note that this code is completely unrelated to devfs, the
-          "/dev file system support".
-
           Most users want to say Y here.
 
 config USB_BANDWIDTH
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 875596e98e42..26c8cb5f3e67 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -1790,7 +1790,10 @@ static int finish_device_resume(struct usb_device *udev)
          * and device drivers will know about any resume quirks.
          */
         status = usb_get_status(udev, USB_RECIP_DEVICE, 0, &devstatus);
-        if (status < 2)
+        if (status >= 0)
+                status = (status == 2 ? 0 : -ENODEV);
+
+        if (status)
                 dev_dbg(&udev->dev,
                         "gone after usb resume? status %d\n",
                         status);
@@ -1879,7 +1882,12 @@ hub_port_resume(struct usb_hub *hub, int port1, struct usb_device *udev)
                         dev_dbg(hub->intfdev,
                                 "port %d status %04x.%04x after resume, %d\n",
                                 port1, portchange, devstatus, status);
+                        if (status >= 0)
+                                status = -ENODEV;
                 } else {
+                        if (portchange & USB_PORT_STAT_C_SUSPEND)
+                                clear_port_feature(hub->hdev, port1,
+                                                USB_PORT_FEAT_C_SUSPEND);
                         /* TRSMRCY = 10 msec */
                         msleep(10);
                         if (udev)
diff --git a/drivers/usb/core/inode.c b/drivers/usb/core/inode.c
index f48c3dbc367a..3182c2224ba2 100644
--- a/drivers/usb/core/inode.c
+++ b/drivers/usb/core/inode.c
@@ -695,7 +695,7 @@ static void usbfs_remove_device(struct usb_device *dev)
                 wake_up_all(&ds->wait);
                 list_del_init(&ds->list);
                 if (ds->discsignr) {
-                        sinfo.si_signo = SIGPIPE;
+                        sinfo.si_signo = ds->discsignr;
                         sinfo.si_errno = EPIPE;
                         sinfo.si_code = SI_ASYNCIO;
                         sinfo.si_addr = ds->disccontext;
diff --git a/drivers/usb/gadget/epautoconf.c b/drivers/usb/gadget/epautoconf.c
index f7c6d758e1b0..53d584589c26 100644
--- a/drivers/usb/gadget/epautoconf.c
+++ b/drivers/usb/gadget/epautoconf.c
@@ -34,12 +34,12 @@
 
 
 /* we must assign addresses for configurable endpoints (like net2280) */
-static __initdata unsigned epnum;
+static __devinitdata unsigned epnum;
 
 // #define MANY_ENDPOINTS
 #ifdef MANY_ENDPOINTS
 /* more than 15 configurable endpoints */
-static __initdata unsigned in_epnum;
+static __devinitdata unsigned in_epnum;
 #endif
 
 
@@ -59,7 +59,7 @@ static __initdata unsigned in_epnum;
  * NOTE:  each endpoint is unidirectional, as specified by its USB
  * descriptor; and isn't specific to a configuration or altsetting.
  */
-static int __init
+static int __devinit
 ep_matches (
         struct usb_gadget               *gadget,
         struct usb_ep                   *ep,
@@ -73,7 +73,7 @@ ep_matches (
         /* endpoint already claimed? */
         if (0 != ep->driver_data)
                 return 0;
-                
+
         /* only support ep0 for portable CONTROL traffic */
         type = desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK;
         if (USB_ENDPOINT_XFER_CONTROL == type)
@@ -186,7 +186,7 @@ ep_matches (
         return 1;
 }
 
-static struct usb_ep * __init
+static struct usb_ep * __devinit
 find_ep (struct usb_gadget *gadget, const char *name)
 {
         struct usb_ep   *ep;
@@ -228,7 +228,7 @@ find_ep (struct usb_gadget *gadget, const char *name)
  *
  * On failure, this returns a null endpoint descriptor.
  */
-struct usb_ep * __init usb_ep_autoconfig (
+struct usb_ep * __devinit usb_ep_autoconfig (
         struct usb_gadget               *gadget,
         struct usb_endpoint_descriptor  *desc
 )
@@ -276,7 +276,7 @@ struct usb_ep * __init usb_ep_autoconfig (
                         return ep;
         }
 
-        /* Second, look at endpoints until an unclaimed one looks usable */ 
+        /* Second, look at endpoints until an unclaimed one looks usable */
         list_for_each_entry (ep, &gadget->ep_list, ep_list) {
                 if (ep_matches (gadget, ep, desc))
                         return ep;
@@ -295,7 +295,7 @@ struct usb_ep * __init usb_ep_autoconfig (
  * state such as ep->driver_data and the record of assigned endpoints
  * used by usb_ep_autoconfig().
  */
-void __init usb_ep_autoconfig_reset (struct usb_gadget *gadget)
+void __devinit usb_ep_autoconfig_reset (struct usb_gadget *gadget)
 {
         struct usb_ep   *ep;
 
diff --git a/drivers/usb/gadget/ether.c b/drivers/usb/gadget/ether.c
index 8320fcef0425..4fe1bec1c255 100644
--- a/drivers/usb/gadget/ether.c
+++ b/drivers/usb/gadget/ether.c
@@ -2131,7 +2131,7 @@ eth_req_free (struct usb_ep *ep, struct usb_request *req)
 }
 
 
-static void __exit
+static void /* __init_or_exit */
 eth_unbind (struct usb_gadget *gadget)
 {
         struct eth_dev          *dev = get_gadget_data (gadget);
@@ -2158,7 +2158,7 @@ eth_unbind (struct usb_gadget *gadget)
         set_gadget_data (gadget, NULL);
 }
 
-static u8 __init nibble (unsigned char c)
+static u8 __devinit nibble (unsigned char c)
 {
         if (likely (isdigit (c)))
                 return c - '0';
@@ -2168,7 +2168,7 @@ static u8 __init nibble (unsigned char c)
         return 0;
 }
 
-static int __init get_ether_addr(const char *str, u8 *dev_addr)
+static int __devinit get_ether_addr(const char *str, u8 *dev_addr)
 {
         if (str) {
                 unsigned        i;
@@ -2189,7 +2189,7 @@ static int __init get_ether_addr(const char *str, u8 *dev_addr)
         return 1;
 }
 
-static int __init
+static int __devinit
 eth_bind (struct usb_gadget *gadget)
 {
         struct eth_dev          *dev;
diff --git a/drivers/usb/gadget/file_storage.c b/drivers/usb/gadget/file_storage.c
index b1a9cf06f3e6..8d7f1e84cd7b 100644
--- a/drivers/usb/gadget/file_storage.c
+++ b/drivers/usb/gadget/file_storage.c
@@ -3691,7 +3691,7 @@ static void lun_release(struct device *dev)
         kref_put(&fsg->ref, fsg_release);
 }
 
-static void __exit fsg_unbind(struct usb_gadget *gadget)
+static void /* __init_or_exit */ fsg_unbind(struct usb_gadget *gadget)
 {
         struct fsg_dev          *fsg = get_gadget_data(gadget);
         int                     i;
diff --git a/drivers/usb/gadget/rndis.c b/drivers/usb/gadget/rndis.c
index 354670d12308..408c3380d602 100644
--- a/drivers/usb/gadget/rndis.c
+++ b/drivers/usb/gadget/rndis.c
@@ -1398,7 +1398,7 @@ static struct proc_dir_entry *rndis_connect_state [RNDIS_MAX_CONFIGS];
 #endif  /* CONFIG_USB_GADGET_DEBUG_FILES */
 
 
-int __init rndis_init (void)
+int __devinit rndis_init (void)
 {
         u8 i;
 
diff --git a/drivers/usb/gadget/rndis.h b/drivers/usb/gadget/rndis.h
index 2956608be751..4c3c7259f019 100644
--- a/drivers/usb/gadget/rndis.h
+++ b/drivers/usb/gadget/rndis.h
@@ -264,7 +264,7 @@ int  rndis_signal_disconnect (int configNr);
 int  rndis_state (int configNr);
 extern void rndis_set_host_mac (int configNr, const u8 *addr);
 
-int __init rndis_init (void);
+int __devinit rndis_init (void);
 void rndis_exit (void);
 
 #endif  /* _LINUX_RNDIS_H */
diff --git a/drivers/usb/gadget/serial.c b/drivers/usb/gadget/serial.c
index 30d7664d449d..e762aa19ab0a 100644
--- a/drivers/usb/gadget/serial.c
+++ b/drivers/usb/gadget/serial.c
@@ -1473,7 +1473,7 @@ autoconf_fail:
  * Called on module unload.  Frees the control request and device
  * structure.
  */
-static void __exit gs_unbind(struct usb_gadget *gadget)
+static void /* __init_or_exit */ gs_unbind(struct usb_gadget *gadget)
 {
         struct gs_dev *dev = get_gadget_data(gadget);
 
diff --git a/drivers/usb/gadget/zero.c b/drivers/usb/gadget/zero.c
index 3a08a7ab4ce0..b7018ee487ea 100644
--- a/drivers/usb/gadget/zero.c
+++ b/drivers/usb/gadget/zero.c
@@ -1121,7 +1121,7 @@ zero_autoresume (unsigned long _dev)
 
 /*-------------------------------------------------------------------------*/
 
-static void __exit
+static void /* __init_or_exit */
 zero_unbind (struct usb_gadget *gadget)
 {
         struct zero_dev         *dev = get_gadget_data (gadget);
diff --git a/drivers/usb/host/ehci-au1xxx.c b/drivers/usb/host/ehci-au1xxx.c
index d66867aa527e..26ed757d22a6 100644
--- a/drivers/usb/host/ehci-au1xxx.c
+++ b/drivers/usb/host/ehci-au1xxx.c
@@ -41,8 +41,6 @@
 #endif
 #define USBH_DISABLE      (USB_MCFG_EBMEN | USB_MCFG_EMEMEN)
 
-#endif                          /* Au1200 */
-
 extern int usb_disabled(void);
 
 /*-------------------------------------------------------------------------*/
@@ -107,9 +105,9 @@ int usb_ehci_au1xxx_probe(const struct hc_driver *driver,
 
         /* Au1200 AB USB does not support coherent memory */
         if (!(read_c0_prid() & 0xff)) {
-                pr_info("%s: this is chip revision AB!\n", dev->dev.name);
+                pr_info("%s: this is chip revision AB!\n", dev->name);
                 pr_info("%s: update your board or re-configure the kernel\n",
-                        dev->dev.name);
+                        dev->name);
                 return -ENODEV;
         }
 #endif
@@ -228,9 +226,8 @@ static const struct hc_driver ehci_au1xxx_hc_driver = {
 
 /*-------------------------------------------------------------------------*/
 
-static int ehci_hcd_au1xxx_drv_probe(struct device *dev)
+static int ehci_hcd_au1xxx_drv_probe(struct platform_device *pdev)
 {
-        struct platform_device *pdev = to_platform_device(dev);
         struct usb_hcd *hcd = NULL;
         int ret;
 
@@ -243,10 +240,9 @@ static int ehci_hcd_au1xxx_drv_probe(struct device *dev)
         return ret;
 }
 
-static int ehci_hcd_au1xxx_drv_remove(struct device *dev)
+static int ehci_hcd_au1xxx_drv_remove(struct platform_device *pdev)
 {
-        struct platform_device *pdev = to_platform_device(dev);
-        struct usb_hcd *hcd = dev_get_drvdata(dev);
+        struct usb_hcd *hcd = platform_get_drvdata(pdev);
 
         usb_ehci_au1xxx_remove(hcd, pdev);
         return 0;
@@ -269,12 +265,13 @@ static int ehci_hcd_au1xxx_drv_resume(struct device *dev)
 }
 */
 MODULE_ALIAS("au1xxx-ehci");
-/* FIXME use "struct platform_driver" */
-static struct device_driver ehci_hcd_au1xxx_driver = {
-        .name = "au1xxx-ehci",
-        .bus = &platform_bus_type,
+static struct platform_driver ehci_hcd_au1xxx_driver = {
         .probe = ehci_hcd_au1xxx_drv_probe,
         .remove = ehci_hcd_au1xxx_drv_remove,
         /*.suspend      = ehci_hcd_au1xxx_drv_suspend, */
         /*.resume       = ehci_hcd_au1xxx_drv_resume, */
+        .driver = {
+                .name = "au1xxx-ehci",
+                .bus = &platform_bus_type
+        }
 };
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index cee6f538de0a..85b0b4ad4c16 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -625,10 +625,11 @@ static irqreturn_t ehci_irq (struct usb_hcd *hcd, struct pt_regs *regs)
                         writel (status | CMD_RUN, &ehci->regs->command);
 
                 while (i--) {
-                        status = readl (&ehci->regs->port_status [i]);
-                        if (status & PORT_OWNER)
+                        int pstatus = readl (&ehci->regs->port_status [i]);
+
+                        if (pstatus & PORT_OWNER)
                                 continue;
-                        if (!(status & PORT_RESUME)
+                        if (!(pstatus & PORT_RESUME)
                                         || ehci->reset_done [i] != 0)
                                 continue;
 
diff --git a/drivers/usb/host/ohci-au1xxx.c b/drivers/usb/host/ohci-au1xxx.c
index 689261e44018..822914e2f43b 100644
--- a/drivers/usb/host/ohci-au1xxx.c
+++ b/drivers/usb/host/ohci-au1xxx.c
@@ -101,13 +101,16 @@ static void au1xxx_start_ohc(struct platform_device *dev)
 
 #endif  /* Au1200 */
 
+#ifndef CONFIG_SOC_AU1200
         /* wait for reset complete (read register twice; see au1500 errata) */
         while (au_readl(USB_HOST_CONFIG),
                 !(au_readl(USB_HOST_CONFIG) & USBH_ENABLE_RD))
+#endif
                 udelay(1000);
 
         printk(KERN_DEBUG __FILE__
         ": Clock to USB host has been enabled \n");
+#endif
 }
 
 static void au1xxx_stop_ohc(struct platform_device *dev)
@@ -157,9 +160,9 @@ static int usb_ohci_au1xxx_probe(const struct hc_driver *driver,
         /* Au1200 AB USB does not support coherent memory */
         if (!(read_c0_prid() & 0xff)) {
                 pr_info("%s: this is chip revision AB !!\n",
-                        dev->dev.name);
+                        dev->name);
                 pr_info("%s: update your board or re-configure the kernel\n",
-                        dev->dev.name);
+                        dev->name);
                 return -ENODEV;
         }
 #endif
diff --git a/drivers/usb/host/ohci-ep93xx.c b/drivers/usb/host/ohci-ep93xx.c
new file mode 100644
index 000000000000..6531c4d26527
--- /dev/null
+++ b/drivers/usb/host/ohci-ep93xx.c
@@ -0,0 +1,225 @@
+/*
+ * OHCI HCD (Host Controller Driver) for USB.
+ *
+ * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
+ * (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net>
+ * (C) Copyright 2002 Hewlett-Packard Company
+ *
+ * Bus Glue for ep93xx.
+ *
+ * Written by Christopher Hoover <ch@hpl.hp.com>
+ * Based on fragments of previous driver by Russell King et al.
+ *
+ * Modified for LH7A404 from ohci-sa1111.c
+ *  by Durgesh Pattamatta <pattamattad@sharpsec.com>
+ *
+ * Modified for pxa27x from ohci-lh7a404.c
+ *  by Nick Bane <nick@cecomputing.co.uk> 26-8-2004
+ *
+ * Modified for ep93xx from ohci-pxa27x.c
+ *  by Lennert Buytenhek <buytenh@wantstofly.org> 28-2-2006
+ *  Based on an earlier driver by Ray Lehtiniemi
+ *
+ * This file is licenced under the GPL.
+ */
+
+#include <linux/clk.h>
+#include <linux/device.h>
+#include <linux/signal.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-types.h>
+#include <asm/hardware.h>
+
+static struct clk *usb_host_clock;
+
+static void ep93xx_start_hc(struct device *dev)
+{
+        clk_enable(usb_host_clock);
+}
+
+static void ep93xx_stop_hc(struct device *dev)
+{
+        clk_disable(usb_host_clock);
+}
+
+static int usb_hcd_ep93xx_probe(const struct hc_driver *driver,
+                         struct platform_device *pdev)
+{
+        int retval;
+        struct usb_hcd *hcd;
+
+        if (pdev->resource[1].flags != IORESOURCE_IRQ) {
+                pr_debug("resource[1] is not IORESOURCE_IRQ");
+                return -ENOMEM;
+        }
+
+        hcd = usb_create_hcd(driver, &pdev->dev, "ep93xx");
+        if (hcd == NULL)
+                return -ENOMEM;
+
+        hcd->rsrc_start = pdev->resource[0].start;
+        hcd->rsrc_len = pdev->resource[0].end - pdev->resource[0].start + 1;
+        if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
+                usb_put_hcd(hcd);
+                retval = -EBUSY;
+                goto err1;
+        }
+
+        hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
+        if (hcd->regs == NULL) {
+                pr_debug("ioremap failed");
+                retval = -ENOMEM;
+                goto err2;
+        }
+
+        usb_host_clock = clk_get(&pdev->dev, "usb_host");
+        ep93xx_start_hc(&pdev->dev);
+
+        ohci_hcd_init(hcd_to_ohci(hcd));
+
+        retval = usb_add_hcd(hcd, pdev->resource[1].start, SA_INTERRUPT);
+        if (retval == 0)
+                return retval;
+
+        ep93xx_stop_hc(&pdev->dev);
+        iounmap(hcd->regs);
+err2:
+        release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+err1:
+        usb_put_hcd(hcd);
+
+        return retval;
+}
+
+static void usb_hcd_ep93xx_remove(struct usb_hcd *hcd,
+                        struct platform_device *pdev)
+{
+        usb_remove_hcd(hcd);
+        ep93xx_stop_hc(&pdev->dev);
+        clk_put(usb_host_clock);
+        iounmap(hcd->regs);
+        release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+        usb_put_hcd(hcd);
+}
+
+static int __devinit ohci_ep93xx_start(struct usb_hcd *hcd)
+{
+        struct ohci_hcd *ohci = hcd_to_ohci(hcd);
+        int ret;
+
+        if ((ret = ohci_init(ohci)) < 0)
+                return ret;
+
+        if ((ret = ohci_run(ohci)) < 0) {
+                err("can't start %s", hcd->self.bus_name);
+                ohci_stop(hcd);
+                return ret;
+        }
+
+        return 0;
+}
+
+static struct hc_driver ohci_ep93xx_hc_driver = {
+        .description            = hcd_name,
+        .product_desc           = "EP93xx OHCI",
+        .hcd_priv_size          = sizeof(struct ohci_hcd),
+        .irq                    = ohci_irq,
+        .flags                  = HCD_USB11 | HCD_MEMORY,
+        .start                  = ohci_ep93xx_start,
+        .stop                   = ohci_stop,
+        .urb_enqueue            = ohci_urb_enqueue,
+        .urb_dequeue            = ohci_urb_dequeue,
+        .endpoint_disable       = ohci_endpoint_disable,
+        .get_frame_number       = ohci_get_frame,
+        .hub_status_data        = ohci_hub_status_data,
+        .hub_control            = ohci_hub_control,
+#ifdef CONFIG_PM
+        .bus_suspend            = ohci_bus_suspend,
+        .bus_resume             = ohci_bus_resume,
+#endif
+        .start_port_reset       = ohci_start_port_reset,
+};
+
+extern int usb_disabled(void);
+
+static int ohci_hcd_ep93xx_drv_probe(struct platform_device *pdev)
+{
+        int ret;
+
+        ret = -ENODEV;
+        if (!usb_disabled())
+                ret = usb_hcd_ep93xx_probe(&ohci_ep93xx_hc_driver, pdev);
+
+        return ret;
+}
+
+static int ohci_hcd_ep93xx_drv_remove(struct platform_device *pdev)
+{
+        struct usb_hcd *hcd = platform_get_drvdata(pdev);
+
+        usb_hcd_ep93xx_remove(hcd, pdev);
+
+        return 0;
+}
+
+#ifdef CONFIG_PM
+static int ohci_hcd_ep93xx_drv_suspend(struct platform_device *pdev, pm_message_t state)
+{
+        struct usb_hcd *hcd = platform_get_drvdata(pdev);
+        struct ochi_hcd *ohci = hcd_to_ohci(hcd);
+
+        if (time_before(jiffies, ohci->next_statechange))
+                msleep(5);
+        ohci->next_statechange = jiffies;
+
+        ep93xx_stop_hc(&pdev->dev);
+        hcd->state = HC_STATE_SUSPENDED;
+        pdev->dev.power.power_state = PMSG_SUSPEND;
+
+        return 0;
+}
+
+static int ohci_hcd_ep93xx_drv_resume(struct platform_device *pdev)
+{
+        struct usb_hcd *hcd = platform_get_drvdata(pdev);
+        struct ohci_hcd *ohci = hcd_to_ohci(hcd);
+        int status;
+
+        if (time_before(jiffies, ohci->next_statechange))
+                msleep(5);
+        ohci->next_statechange = jiffies;
+
+        ep93xx_start_hc(&pdev->dev);
+        pdev->dev.power.power_state = PMSG_ON;
+        usb_hcd_resume_root_hub(hcd);
+
+        return 0;
+}
+#endif
+
+
+static struct platform_driver ohci_hcd_ep93xx_driver = {
+        .probe          = ohci_hcd_ep93xx_drv_probe,
+        .remove         = ohci_hcd_ep93xx_drv_remove,
+#ifdef CONFIG_PM
+        .suspend        = ohci_hcd_ep93xx_drv_suspend,
+        .resume         = ohci_hcd_ep93xx_drv_resume,
+#endif
+        .driver         = {
+                .name   = "ep93xx-ohci",
+        },
+};
+
+static int __init ohci_hcd_ep93xx_init(void)
+{
+        return platform_driver_register(&ohci_hcd_ep93xx_driver);
+}
+
+static void __exit ohci_hcd_ep93xx_cleanup(void)
+{
+        platform_driver_unregister(&ohci_hcd_ep93xx_driver);
+}
+
+module_init(ohci_hcd_ep93xx_init);
+module_exit(ohci_hcd_ep93xx_cleanup);
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index 8fb842ed5f6e..afef5ac35b4a 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -901,6 +901,10 @@ MODULE_LICENSE ("GPL");
 #include "ohci-pxa27x.c"
 #endif
 
+#ifdef CONFIG_ARCH_EP93XX
+#include "ohci-ep93xx.c"
+#endif
+
 #ifdef CONFIG_SOC_AU1X00
 #include "ohci-au1xxx.c"
 #endif
@@ -919,6 +923,7 @@ MODULE_LICENSE ("GPL");
       || defined(CONFIG_ARCH_OMAP) \
       || defined (CONFIG_ARCH_LH7A404) \
       || defined (CONFIG_PXA27x) \
+      || defined (CONFIG_ARCH_EP93XX) \
       || defined (CONFIG_SOC_AU1X00) \
       || defined (CONFIG_USB_OHCI_HCD_PPC_SOC) \
       || defined (CONFIG_ARCH_AT91RM9200) \
diff --git a/drivers/usb/host/ohci-hub.c b/drivers/usb/host/ohci-hub.c
index 0bb972b58336..5b0a23fd798b 100644
--- a/drivers/usb/host/ohci-hub.c
+++ b/drivers/usb/host/ohci-hub.c
@@ -581,14 +581,14 @@ static int ohci_hub_control (
                 break;
         case GetHubStatus:
                 temp = roothub_status (ohci) & ~(RH_HS_CRWE | RH_HS_DRWE);
-                *(__le32 *) buf = cpu_to_le32 (temp);
+                put_unaligned(cpu_to_le32 (temp), (__le32 *) buf);
                 break;
         case GetPortStatus:
                 if (!wIndex || wIndex > ports)
                         goto error;
                 wIndex--;
                 temp = roothub_portstatus (ohci, wIndex);
-                *(__le32 *) buf = cpu_to_le32 (temp);
+                put_unaligned(cpu_to_le32 (temp), (__le32 *) buf);
 
 #ifndef OHCI_VERBOSE_DEBUG
         if (*(u16*)(buf+2))     /* only if wPortChange is interesting */
diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c
index dff60568b4a1..20861650905e 100644
--- a/drivers/usb/host/pci-quirks.c
+++ b/drivers/usb/host/pci-quirks.c
@@ -167,8 +167,6 @@ static int __devinit mmio_resource_enabled(struct pci_dev *pdev, int idx)
 static void __devinit quirk_usb_handoff_ohci(struct pci_dev *pdev)
 {
         void __iomem *base;
-        int wait_time;
-        u32 control;
 
         if (!mmio_resource_enabled(pdev, 0))
                 return;
@@ -179,9 +177,10 @@ static void __devinit quirk_usb_handoff_ohci(struct pci_dev *pdev)
 
 /* On PA-RISC, PDC can leave IR set incorrectly; ignore it there. */
 #ifndef __hppa__
-        control = readl(base + OHCI_CONTROL);
+{
+        u32 control = readl(base + OHCI_CONTROL);
         if (control & OHCI_CTRL_IR) {
-                wait_time = 500; /* arbitrary; 5 seconds */
+                int wait_time = 500; /* arbitrary; 5 seconds */
                 writel(OHCI_INTR_OC, base + OHCI_INTRENABLE);
                 writel(OHCI_OCR, base + OHCI_CMDSTATUS);
                 while (wait_time > 0 &&
@@ -198,6 +197,7 @@ static void __devinit quirk_usb_handoff_ohci(struct pci_dev *pdev)
                 /* reset controller, preserving RWC */
                 writel(control & OHCI_CTRL_RWC, base + OHCI_CONTROL);
         }
+}
 #endif
 
         /*
diff --git a/drivers/usb/input/hid-core.c b/drivers/usb/input/hid-core.c
index b9fb9687f926..8ea9c915fbf9 100644
--- a/drivers/usb/input/hid-core.c
+++ b/drivers/usb/input/hid-core.c
@@ -1507,6 +1507,9 @@ void hid_init_reports(struct hid_device *hid)
 #define USB_DEVICE_ID_4_PHIDGETSERVO_20 0x8104
 #define USB_DEVICE_ID_DUAL_USB_JOYPAD   0x8866
 
+#define USB_VENDOR_ID_WISEGROUP_LTD     0x6677
+#define USB_DEVICE_ID_SMARTJOY_DUAL_PLUS 0x8802
+
 #define USB_VENDOR_ID_CODEMERCS         0x07c0
 #define USB_DEVICE_ID_CODEMERCS_IOW40   0x1500
 #define USB_DEVICE_ID_CODEMERCS_IOW24   0x1501
@@ -1670,6 +1673,7 @@ static const struct hid_blacklist {
         { USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_4PORTKVM, HID_QUIRK_NOGET },
         { USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_4PORTKVMC, HID_QUIRK_NOGET },
         { USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_DUAL_USB_JOYPAD, HID_QUIRK_NOGET | HID_QUIRK_MULTI_INPUT },
+        { USB_VENDOR_ID_WISEGROUP_LTD, USB_DEVICE_ID_SMARTJOY_DUAL_PLUS, HID_QUIRK_NOGET | HID_QUIRK_MULTI_INPUT },
 
         { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_MIGHTYMOUSE, HID_QUIRK_MIGHTYMOUSE | HID_QUIRK_INVERT_HWHEEL },
         { USB_VENDOR_ID_A4TECH, USB_DEVICE_ID_A4TECH_WCP32PU, HID_QUIRK_2WHEEL_MOUSE_HACK_7 },
diff --git a/drivers/usb/misc/Kconfig b/drivers/usb/misc/Kconfig
index daa486dde8cf..88928a4be805 100644
--- a/drivers/usb/misc/Kconfig
+++ b/drivers/usb/misc/Kconfig
@@ -88,19 +88,19 @@ config USB_LED
           To compile this driver as a module, choose M here: the
           module will be called usbled.
 
-config USB_CY7C63
+config USB_CYPRESS_CY7C63
         tristate "Cypress CY7C63xxx USB driver support"
         depends on USB
         help
           Say Y here if you want to connect a Cypress CY7C63xxx
-          micro controller to your computer's USB port. This driver
-          supports the pre-programmed devices (incl. firmware) by
-          AK Modul-Bus Computer GmbH.
+          micro controller to your computer's USB port. Currently this
+          driver supports the pre-programmed devices (incl. firmware)
+          by AK Modul-Bus Computer GmbH.
 
           Please see: http://www.ak-modul-bus.de/stat/mikrocontroller.html
 
           To compile this driver as a module, choose M here: the
-          module will be called cy7c63.
+          module will be called cypress_cy7c63.
 
 config USB_CYTHERM
         tristate "Cypress USB thermometer driver support"
diff --git a/drivers/usb/misc/Makefile b/drivers/usb/misc/Makefile
index f25a97227297..2927260c5812 100644
--- a/drivers/usb/misc/Makefile
+++ b/drivers/usb/misc/Makefile
@@ -4,7 +4,7 @@
 #
 
 obj-$(CONFIG_USB_AUERSWALD)     += auerswald.o
-obj-$(CONFIG_USB_CY7C63)        += cy7c63.o
+obj-$(CONFIG_USB_CYPRESS_CY7C63)+= cypress_cy7c63.o
 obj-$(CONFIG_USB_CYTHERM)       += cytherm.o
 obj-$(CONFIG_USB_EMI26)         += emi26.o
 obj-$(CONFIG_USB_EMI62)         += emi62.o
diff --git a/drivers/usb/misc/cy7c63.c b/drivers/usb/misc/cy7c63.c
deleted file mode 100644
index 8a1c10b89b76..000000000000
--- a/drivers/usb/misc/cy7c63.c
+++ /dev/null
@@ -1,244 +0,0 @@
-/*
-* cy7c63.c
-*
-* Copyright (c) 2006 Oliver Bock (bock@fh-wolfenbuettel.de)
-*
-*       This driver is based on the Cypress Thermometer USB Driver by
-*       Marcus Maul and the 2.0 version of Greg Kroah-Hartman's
-*       USB Skeleton driver.
-*
-*       Is is a generic driver for the Cypress CY7C63000 family.
-*       For the time being it enables you to toggle the single I/O ports
-*       of the device.
-*
-*       Supported vendors:      AK Modul-Bus Computer GmbH
-*       Supported devices:      CY7C63001A-PC (to be continued...)
-*       Supported functions:    Read/Write Ports (to be continued...)
-*
-*       Chipsets families:      CY7C63000, CY7C63001, CY7C63100, CY7C63101
-*
-*
-*       This program is free software; you can redistribute it and/or
-*       modify it under the terms of the GNU General Public License as
-*       published by the Free Software Foundation, version 2.
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/usb.h>
-
-#define DRIVER_AUTHOR           "Oliver Bock (bock@fh-wolfenbuettel.de)"
-#define DRIVER_DESC             "Cypress CY7C63xxx USB driver"
-
-#define CY7C63_VENDOR_ID        0xa2c
-#define CY7C63_PRODUCT_ID       0x8
-
-#define CY7C63_READ_PORT        0x4
-#define CY7C63_WRITE_PORT       0x5
-#define CY7C63_READ_RAM         0x2
-#define CY7C63_WRITE_RAM        0x3
-#define CY7C63_READ_ROM         0x1
-
-#define CY7C63_READ_PORT_ID0    0
-#define CY7C63_WRITE_PORT_ID0   0
-#define CY7C63_READ_PORT_ID1    0x2
-#define CY7C63_WRITE_PORT_ID1   1
-
-#define CY7C63_MAX_REQSIZE      8
-
-
-/* table of devices that work with this driver */
-static struct usb_device_id cy7c63_table [] = {
-        { USB_DEVICE(CY7C63_VENDOR_ID, CY7C63_PRODUCT_ID) },
-        { }
-};
-MODULE_DEVICE_TABLE(usb, cy7c63_table);
-
-/* structure to hold all of our device specific stuff */
-struct cy7c63 {
-        struct usb_device *     udev;
-        char                    port0;
-        char                    port1;
-};
-
-/* used to send usb control messages to device */
-int vendor_command(struct cy7c63 *dev, unsigned char request,
-                         unsigned char address, unsigned char data) {
-
-        int retval = 0;
-        unsigned int pipe;
-        unsigned char *iobuf;
-
-        /* allocate some memory for the i/o buffer*/
-        iobuf = kzalloc(CY7C63_MAX_REQSIZE, GFP_KERNEL);
-        if (!iobuf) {
-                dev_err(&dev->udev->dev, "Out of memory!\n");
-                retval = -ENOMEM;
-                goto error;
-        }
-
-        dev_dbg(&dev->udev->dev, "Sending usb_control_msg (data: %d)\n", data);
-
-        /* prepare usb control message and send it upstream */
-        pipe = usb_rcvctrlpipe(dev->udev, 0);
-        retval = usb_control_msg(dev->udev, pipe, request,
-                                USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_OTHER,
-                                address, data, iobuf, CY7C63_MAX_REQSIZE,
-                                USB_CTRL_GET_TIMEOUT);
-
-        /* store returned data (more READs to be added!) */
-        switch (request) {
-                case CY7C63_READ_PORT:
-                        if (address == CY7C63_READ_PORT_ID0) {
-                                dev->port0 = iobuf[1];
-                                dev_dbg(&dev->udev->dev,
-                                        "READ_PORT0 returned: %d\n",dev->port0);
-                        }
-                        else if (address == CY7C63_READ_PORT_ID1) {
-                                dev->port1 = iobuf[1];
-                                dev_dbg(&dev->udev->dev,
-                                        "READ_PORT1 returned: %d\n",dev->port1);
-                        }
-                        break;
-        }
-
-        kfree(iobuf);
-error:
-        return retval;
-}
-
-#define get_set_port(num,read_id,write_id) \
-static ssize_t set_port##num(struct device *dev, struct device_attribute *attr, \
-                                        const char *buf, size_t count) {        \
-                                                                                \
-        int value;                                                              \
-        int result = 0;                                                         \
-                                                                                \
-        struct usb_interface *intf = to_usb_interface(dev);                     \
-        struct cy7c63 *cyp = usb_get_intfdata(intf);                            \
-                                                                                \
-        dev_dbg(&cyp->udev->dev, "WRITE_PORT%d called\n", num);                 \
-                                                                                \
-        /* validate input data */                                               \
-        if (sscanf(buf, "%d", &value) < 1) {                                    \
-                result = -EINVAL;                                               \
-                goto error;                                                     \
-        }                                                                       \
-        if (value>255 || value<0) {                                             \
-                result = -EINVAL;                                               \
-                goto error;                                                     \
-        }                                                                       \
-                                                                                \
-        result = vendor_command(cyp, CY7C63_WRITE_PORT, write_id,               \
-                                         (unsigned char)value);                 \
-                                                                                \
-        dev_dbg(&cyp->udev->dev, "Result of vendor_command: %d\n\n",result);    \
-error:                                                                          \
-        return result < 0 ? result : count;                                     \
-}                                                                               \
-                                                                                \
-static ssize_t get_port##num(struct device *dev,                                \
-                                 struct device_attribute *attr, char *buf) {    \
-                                                                                \
-        int result = 0;                                                         \
-                                                                                \
-        struct usb_interface *intf = to_usb_interface(dev);                     \
-        struct cy7c63 *cyp = usb_get_intfdata(intf);                            \
-                                                                                \
-        dev_dbg(&cyp->udev->dev, "READ_PORT%d called\n", num);                  \
-                                                                                \
-        result = vendor_command(cyp, CY7C63_READ_PORT, read_id, 0);             \
-                                                                                \
-        dev_dbg(&cyp->udev->dev, "Result of vendor_command: %d\n\n", result);   \
-                                                                                \
-        return sprintf(buf, "%d", cyp->port##num);                              \
-}                                                                               \
-static DEVICE_ATTR(port##num, S_IWUGO | S_IRUGO, get_port##num, set_port##num);
-
-get_set_port(0, CY7C63_READ_PORT_ID0, CY7C63_WRITE_PORT_ID0);
-get_set_port(1, CY7C63_READ_PORT_ID1, CY7C63_WRITE_PORT_ID1);
-
-static int cy7c63_probe(struct usb_interface *interface,
-                        const struct usb_device_id *id) {
-
-        struct cy7c63 *dev = NULL;
-        int retval = -ENOMEM;
-
-        /* allocate memory for our device state and initialize it */
-        dev = kzalloc(sizeof(*dev), GFP_KERNEL);
-        if (dev == NULL) {
-                dev_err(&dev->udev->dev, "Out of memory!\n");
-                goto error;
-        }
-
-        dev->udev = usb_get_dev(interface_to_usbdev(interface));
-
-        /* save our data pointer in this interface device */
-        usb_set_intfdata(interface, dev);
-
-        /* create device attribute files */
-        device_create_file(&interface->dev, &dev_attr_port0);
-        device_create_file(&interface->dev, &dev_attr_port1);
-
-        /* let the user know what node this device is now attached to */
-        dev_info(&interface->dev,
-                "Cypress CY7C63xxx device now attached\n");
-
-        retval = 0;
-error:
-        return retval;
-}
-
-static void cy7c63_disconnect(struct usb_interface *interface) {
-
-        struct cy7c63 *dev;
-
-        dev = usb_get_intfdata(interface);
-        usb_set_intfdata(interface, NULL);
-
-        /* remove device attribute files */
-        device_remove_file(&interface->dev, &dev_attr_port0);
-        device_remove_file(&interface->dev, &dev_attr_port1);
-
-        usb_put_dev(dev->udev);
-
-        dev_info(&interface->dev,
-                "Cypress CY7C63xxx device now disconnected\n");
-
-        kfree(dev);
-}
-
-static struct usb_driver cy7c63_driver = {
-        .name = "cy7c63",
-        .probe = cy7c63_probe,
-        .disconnect = cy7c63_disconnect,
-        .id_table = cy7c63_table,
-};
-
-static int __init cy7c63_init(void) {
-
-        int result;
-
-        /* register this driver with the USB subsystem */
-        result = usb_register(&cy7c63_driver);
-        if (result) {
-                err("Function usb_register failed! Error number: %d\n", result);
-        }
-
-        return result;
-}
-
-static void __exit cy7c63_exit(void) {
-
-        /* deregister this driver with the USB subsystem */
-        usb_deregister(&cy7c63_driver);
-}
-
-module_init(cy7c63_init);
-module_exit(cy7c63_exit);
-
-MODULE_AUTHOR(DRIVER_AUTHOR);
-MODULE_DESCRIPTION(DRIVER_DESC);
-
-MODULE_LICENSE("GPL");
diff --git a/drivers/usb/misc/cypress_cy7c63.c b/drivers/usb/misc/cypress_cy7c63.c
new file mode 100644
index 000000000000..e091d327bd9e
--- /dev/null
+++ b/drivers/usb/misc/cypress_cy7c63.c
@@ -0,0 +1,279 @@
+/*
+* cypress_cy7c63.c
+*
+* Copyright (c) 2006 Oliver Bock (o.bock@fh-wolfenbuettel.de)
+*
+*       This driver is based on the Cypress USB Driver by Marcus Maul
+*       (cyport) and the 2.0 version of Greg Kroah-Hartman's
+*       USB Skeleton driver.
+*
+*       This is a generic driver for the Cypress CY7C63xxx family.
+*       For the time being it enables you to read from and write to
+*       the single I/O ports of the device.
+*
+*       Supported vendors:      AK Modul-Bus Computer GmbH
+*       Supported devices:      CY7C63001A-PC (to be continued...)
+*       Supported functions:    Read/Write Ports (to be continued...)
+*
+*
+*       This program is free software; you can redistribute it and/or
+*       modify it under the terms of the GNU General Public License as
+*       published by the Free Software Foundation, version 2.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/usb.h>
+
+#define DRIVER_AUTHOR           "Oliver Bock (o.bock@fh-wolfenbuettel.de)"
+#define DRIVER_DESC             "Cypress CY7C63xxx USB driver"
+
+#define CYPRESS_VENDOR_ID       0xa2c
+#define CYPRESS_PRODUCT_ID      0x8
+
+#define CYPRESS_READ_PORT       0x4
+#define CYPRESS_WRITE_PORT      0x5
+
+#define CYPRESS_READ_RAM        0x2
+#define CYPRESS_WRITE_RAM       0x3
+#define CYPRESS_READ_ROM        0x1
+
+#define CYPRESS_READ_PORT_ID0   0
+#define CYPRESS_WRITE_PORT_ID0  0
+#define CYPRESS_READ_PORT_ID1   0x2
+#define CYPRESS_WRITE_PORT_ID1  1
+
+#define CYPRESS_MAX_REQSIZE     8
+
+
+/* table of devices that work with this driver */
+static struct usb_device_id cypress_table [] = {
+        { USB_DEVICE(CYPRESS_VENDOR_ID, CYPRESS_PRODUCT_ID) },
+        { }
+};
+MODULE_DEVICE_TABLE(usb, cypress_table);
+
+/* structure to hold all of our device specific stuff */
+struct cypress {
+        struct usb_device *     udev;
+        unsigned char           port[2];
+};
+
+/* used to send usb control messages to device */
+static int vendor_command(struct cypress *dev, unsigned char request,
+                          unsigned char address, unsigned char data)
+{
+        int retval = 0;
+        unsigned int pipe;
+        unsigned char *iobuf;
+
+        /* allocate some memory for the i/o buffer*/
+        iobuf = kzalloc(CYPRESS_MAX_REQSIZE, GFP_KERNEL);
+        if (!iobuf) {
+                dev_err(&dev->udev->dev, "Out of memory!\n");
+                retval = -ENOMEM;
+                goto error;
+        }
+
+        dev_dbg(&dev->udev->dev, "Sending usb_control_msg (data: %d)\n", data);
+
+        /* prepare usb control message and send it upstream */
+        pipe = usb_rcvctrlpipe(dev->udev, 0);
+        retval = usb_control_msg(dev->udev, pipe, request,
+                                 USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_OTHER,
+                                 address, data, iobuf, CYPRESS_MAX_REQSIZE,
+                                 USB_CTRL_GET_TIMEOUT);
+
+        /* store returned data (more READs to be added) */
+        switch (request) {
+                case CYPRESS_READ_PORT:
+                        if (address == CYPRESS_READ_PORT_ID0) {
+                                dev->port[0] = iobuf[1];
+                                dev_dbg(&dev->udev->dev,
+                                        "READ_PORT0 returned: %d\n",
+                                        dev->port[0]);
+                        }
+                        else if (address == CYPRESS_READ_PORT_ID1) {
+                                dev->port[1] = iobuf[1];
+                                dev_dbg(&dev->udev->dev,
+                                        "READ_PORT1 returned: %d\n",
+                                        dev->port[1]);
+                        }
+                        break;
+        }
+
+        kfree(iobuf);
+error:
+        return retval;
+}
+
+/* write port value */
+static ssize_t write_port(struct device *dev, struct device_attribute *attr,
+                          const char *buf, size_t count,
+                          int port_num, int write_id)
+{
+        int value = -1;
+        int result = 0;
+
+        struct usb_interface *intf = to_usb_interface(dev);
+        struct cypress *cyp = usb_get_intfdata(intf);
+
+        dev_dbg(&cyp->udev->dev, "WRITE_PORT%d called\n", port_num);
+
+        /* validate input data */
+        if (sscanf(buf, "%d", &value) < 1) {
+                result = -EINVAL;
+                goto error;
+        }
+        if (value < 0 || value > 255) {
+                result = -EINVAL;
+                goto error;
+        }
+
+        result = vendor_command(cyp, CYPRESS_WRITE_PORT, write_id,
+                                (unsigned char)value);
+
+        dev_dbg(&cyp->udev->dev, "Result of vendor_command: %d\n\n", result);
+error:
+        return result < 0 ? result : count;
+}
+
+/* attribute callback handler (write) */
+static ssize_t set_port0_handler(struct device *dev,
+                                 struct device_attribute *attr,
+                                 const char *buf, size_t count)
+{
+        return write_port(dev, attr, buf, count, 0, CYPRESS_WRITE_PORT_ID0);
+}
+
+/* attribute callback handler (write) */
+static ssize_t set_port1_handler(struct device *dev,
+                                 struct device_attribute *attr,
+                                 const char *buf, size_t count)
+{
+        return write_port(dev, attr, buf, count, 1, CYPRESS_WRITE_PORT_ID1);
+}
+
+/* read port value */
+static ssize_t read_port(struct device *dev, struct device_attribute *attr,
+                         char *buf, int port_num, int read_id)
+{
+        int result = 0;
+
+        struct usb_interface *intf = to_usb_interface(dev);
+        struct cypress *cyp = usb_get_intfdata(intf);
+
+        dev_dbg(&cyp->udev->dev, "READ_PORT%d called\n", port_num);
+
+        result = vendor_command(cyp, CYPRESS_READ_PORT, read_id, 0);
+
+        dev_dbg(&cyp->udev->dev, "Result of vendor_command: %d\n\n", result);
+
+        return sprintf(buf, "%d", cyp->port[port_num]);
+}
+
+/* attribute callback handler (read) */
+static ssize_t get_port0_handler(struct device *dev,
+                                 struct device_attribute *attr, char *buf)
+{
+        return read_port(dev, attr, buf, 0, CYPRESS_READ_PORT_ID0);
+}
+
+/* attribute callback handler (read) */
+static ssize_t get_port1_handler(struct device *dev,
+                                 struct device_attribute *attr, char *buf)
+{
+        return read_port(dev, attr, buf, 1, CYPRESS_READ_PORT_ID1);
+}
+
+static DEVICE_ATTR(port0, S_IWUGO | S_IRUGO,
+                   get_port0_handler, set_port0_handler);
+
+static DEVICE_ATTR(port1, S_IWUGO | S_IRUGO,
+                   get_port1_handler, set_port1_handler);
+
+
+static int cypress_probe(struct usb_interface *interface,
+                         const struct usb_device_id *id)
+{
+        struct cypress *dev = NULL;
+        int retval = -ENOMEM;
+
+        /* allocate memory for our device state and initialize it */
+        dev = kzalloc(sizeof(*dev), GFP_KERNEL);
+        if (dev == NULL) {
+                dev_err(&dev->udev->dev, "Out of memory!\n");
+                goto error;
+        }
+
+        dev->udev = usb_get_dev(interface_to_usbdev(interface));
+
+        /* save our data pointer in this interface device */
+        usb_set_intfdata(interface, dev);
+
+        /* create device attribute files */
+        device_create_file(&interface->dev, &dev_attr_port0);
+        device_create_file(&interface->dev, &dev_attr_port1);
+
+        /* let the user know that the device is now attached */
+        dev_info(&interface->dev,
+                 "Cypress CY7C63xxx device now attached\n");
+
+        retval = 0;
+error:
+        return retval;
+}
+
+static void cypress_disconnect(struct usb_interface *interface)
+{
+        struct cypress *dev;
+
+        dev = usb_get_intfdata(interface);
+        usb_set_intfdata(interface, NULL);
+
+        /* remove device attribute files */
+        device_remove_file(&interface->dev, &dev_attr_port0);
+        device_remove_file(&interface->dev, &dev_attr_port1);
+
+        usb_put_dev(dev->udev);
+
+        dev_info(&interface->dev,
+                 "Cypress CY7C63xxx device now disconnected\n");
+
+        kfree(dev);
+}
+
+static struct usb_driver cypress_driver = {
+        .name = "cypress_cy7c63",
+        .probe = cypress_probe,
+        .disconnect = cypress_disconnect,
+        .id_table = cypress_table,
+};
+
+static int __init cypress_init(void)
+{
+        int result;
+
+        /* register this driver with the USB subsystem */
+        result = usb_register(&cypress_driver);
+        if (result) {
+                err("Function usb_register failed! Error number: %d\n", result);
+        }
+
+        return result;
+}
+
+static void __exit cypress_exit(void)
+{
+        /* deregister this driver with the USB subsystem */
+        usb_deregister(&cypress_driver);
+}
+
+module_init(cypress_init);
+module_exit(cypress_exit);
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/misc/usblcd.c b/drivers/usb/misc/usblcd.c
index c82c402285a0..e095772dd8e9 100644
--- a/drivers/usb/misc/usblcd.c
+++ b/drivers/usb/misc/usblcd.c
@@ -200,10 +200,8 @@ static ssize_t lcd_write(struct file *file, const char __user * user_buffer, siz
 
         /* create a urb, and a buffer for it, and copy the data to the urb */
         urb = usb_alloc_urb(0, GFP_KERNEL);
-        if (!urb) {
-                retval = -ENOMEM;
-                goto error;
-        }
+        if (!urb)
+                return -ENOMEM;
         
         buf = usb_buffer_alloc(dev->udev, count, GFP_KERNEL, &urb->transfer_dma);
         if (!buf) {
diff --git a/drivers/usb/mon/mon_text.c b/drivers/usb/mon/mon_text.c
index e02c1a30c4cd..f961a770cee2 100644
--- a/drivers/usb/mon/mon_text.c
+++ b/drivers/usb/mon/mon_text.c
@@ -64,7 +64,6 @@ struct mon_reader_text {
 };
 
 static void mon_text_ctor(void *, kmem_cache_t *, unsigned long);
-static void mon_text_dtor(void *, kmem_cache_t *, unsigned long);
 
 /*
  * mon_text_submit
@@ -268,7 +267,7 @@ static int mon_text_open(struct inode *inode, struct file *file)
             (long)rp);
         rp->e_slab = kmem_cache_create(rp->slab_name,
             sizeof(struct mon_event_text), sizeof(long), 0,
-            mon_text_ctor, mon_text_dtor);
+            mon_text_ctor, NULL);
         if (rp->e_slab == NULL) {
                 rc = -ENOMEM;
                 goto err_slab;
@@ -459,7 +458,3 @@ static void mon_text_ctor(void *mem, kmem_cache_t *slab, unsigned long sflags)
         memset(mem, 0xe5, sizeof(struct mon_event_text));
 }
 
-static void mon_text_dtor(void *mem, kmem_cache_t *slab, unsigned long sflags)
-{
-        ;
-}
diff --git a/drivers/usb/net/rtl8150.c b/drivers/usb/net/rtl8150.c
index 718f8e2b552b..e5e6e4f3ef87 100644
--- a/drivers/usb/net/rtl8150.c
+++ b/drivers/usb/net/rtl8150.c
@@ -128,11 +128,13 @@
 #define VENDOR_ID_MELCO                 0x0411
 #define VENDOR_ID_MICRONET              0x3980
 #define VENDOR_ID_LONGSHINE             0x07b8
+#define VENDOR_ID_ZYXEL                 0x0586
 
 #define PRODUCT_ID_RTL8150              0x8150
 #define PRODUCT_ID_LUAKTX               0x0012
 #define PRODUCT_ID_LCS8138TX            0x401a
 #define PRODUCT_ID_SP128AR              0x0003
+#define PRODUCT_ID_PRESTIGE             0x401a
 
 #undef  EEPROM_WRITE
 
@@ -142,6 +144,7 @@ static struct usb_device_id rtl8150_table[] = {
         {USB_DEVICE(VENDOR_ID_MELCO, PRODUCT_ID_LUAKTX)},
         {USB_DEVICE(VENDOR_ID_MICRONET, PRODUCT_ID_SP128AR)},
         {USB_DEVICE(VENDOR_ID_LONGSHINE, PRODUCT_ID_LCS8138TX)},
+        {USB_DEVICE(VENDOR_ID_ZYXEL, PRODUCT_ID_PRESTIGE)},
         {}
 };
 
diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig
index 8bd44fda5eaf..ac33bd47cfce 100644
--- a/drivers/usb/serial/Kconfig
+++ b/drivers/usb/serial/Kconfig
@@ -456,6 +456,17 @@ config USB_SERIAL_SAFE_PADDED
         bool "USB Secure Encapsulated Driver - Padded"
         depends on USB_SERIAL_SAFE
 
+config USB_SERIAL_SIERRAWIRELESS
+        tristate "USB Sierra Wireless Driver"
+        depends on USB_SERIAL
+        help
+          Say M here if you want to use a Sierra Wireless device (if
+          using an PC 5220 or AC580 please use the Airprime driver
+          instead).
+
+          To compile this driver as a module, choose M here: the
+          module will be called sierra.
+
 config USB_SERIAL_TI
         tristate "USB TI 3410/5052 Serial Driver"
         depends on USB_SERIAL
diff --git a/drivers/usb/serial/Makefile b/drivers/usb/serial/Makefile
index 5a0960fc9d3e..35d4acc7f1d3 100644
--- a/drivers/usb/serial/Makefile
+++ b/drivers/usb/serial/Makefile
@@ -39,6 +39,7 @@ obj-$(CONFIG_USB_SERIAL_OMNINET)		+= omninet.o
 obj-$(CONFIG_USB_SERIAL_OPTION)                 += option.o
 obj-$(CONFIG_USB_SERIAL_PL2303)                 += pl2303.o
 obj-$(CONFIG_USB_SERIAL_SAFE)                   += safe_serial.o
+obj-$(CONFIG_USB_SERIAL_SIERRAWIRELESS)         += sierra.o
 obj-$(CONFIG_USB_SERIAL_TI)                     += ti_usb_3410_5052.o
 obj-$(CONFIG_USB_SERIAL_VISOR)                  += visor.o
 obj-$(CONFIG_USB_SERIAL_WHITEHEAT)              += whiteheat.o
diff --git a/drivers/usb/serial/airprime.c b/drivers/usb/serial/airprime.c
index 94b9ba0ff875..62082532a8b3 100644
--- a/drivers/usb/serial/airprime.c
+++ b/drivers/usb/serial/airprime.c
@@ -13,7 +13,7 @@
 #include <linux/tty.h>
 #include <linux/module.h>
 #include <linux/usb.h>
-#include "usb-serial.h"
+#include <linux/usb/serial.h>
 
 static struct usb_device_id id_table [] = {
         { USB_DEVICE(0x0c88, 0x17da) }, /* Kyocera Wireless KPC650/Passport */
diff --git a/drivers/usb/serial/anydata.c b/drivers/usb/serial/anydata.c
index 343f6f228220..01843ef8c11e 100644
--- a/drivers/usb/serial/anydata.c
+++ b/drivers/usb/serial/anydata.c
@@ -13,7 +13,7 @@
 #include <linux/tty.h>
 #include <linux/module.h>
 #include <linux/usb.h>
-#include "usb-serial.h"
+#include <linux/usb/serial.h>
 
 static struct usb_device_id id_table [] = {
         { USB_DEVICE(0x16d5, 0x6501) }, /* AirData CDMA device */
@@ -71,7 +71,7 @@ static int anydata_open(struct usb_serial_port *port, struct file *filp)
                                           port->bulk_in_endpointAddress),
                           port->read_urb->transfer_buffer,
                           port->read_urb->transfer_buffer_length,
-                          usb_serial_generic_write_bulk_callback, port);
+                          usb_serial_generic_read_bulk_callback, port);
         result = usb_submit_urb(port->read_urb, GFP_KERNEL);
         if (result)
                 dev_err(&port->dev,
diff --git a/drivers/usb/serial/ark3116.c b/drivers/usb/serial/ark3116.c
index 8dec796222a0..970d9ef0a7a5 100644
--- a/drivers/usb/serial/ark3116.c
+++ b/drivers/usb/serial/ark3116.c
@@ -21,7 +21,7 @@
 #include <linux/tty.h>
 #include <linux/module.h>
 #include <linux/usb.h>
-#include "usb-serial.h"
+#include <linux/usb/serial.h>
 
 
 static int debug;
diff --git a/drivers/usb/serial/belkin_sa.c b/drivers/usb/serial/belkin_sa.c
index 3faa7aa0111a..70ece9e01ce4 100644
--- a/drivers/usb/serial/belkin_sa.c
+++ b/drivers/usb/serial/belkin_sa.c
@@ -74,7 +74,7 @@
 #include <linux/spinlock.h>
 #include <asm/uaccess.h>
 #include <linux/usb.h>
-#include "usb-serial.h"
+#include <linux/usb/serial.h>
 #include "belkin_sa.h"
 
 static int debug;
diff --git a/drivers/usb/serial/bus.c b/drivers/usb/serial/bus.c
index f2d993b70c18..6542f220468f 100644
--- a/drivers/usb/serial/bus.c
+++ b/drivers/usb/serial/bus.c
@@ -13,7 +13,7 @@
 #include <linux/tty.h>
 #include <linux/module.h>
 #include <linux/usb.h>
-#include "usb-serial.h"
+#include <linux/usb/serial.h>
 
 static int usb_serial_device_match (struct device *dev, struct device_driver *drv)
 {
diff --git a/drivers/usb/serial/console.c b/drivers/usb/serial/console.c
index 3d456b32c316..3a9073dbfe6a 100644
--- a/drivers/usb/serial/console.c
+++ b/drivers/usb/serial/console.c
@@ -17,11 +17,10 @@
 #include <linux/tty.h>
 #include <linux/console.h>
 #include <linux/usb.h>
+#include <linux/usb/serial.h>
 
 static int debug;
 
-#include "usb-serial.h"
-
 struct usbcons_info {
         int                     magic;
         int                     break_flag;
diff --git a/drivers/usb/serial/cp2101.c b/drivers/usb/serial/cp2101.c
index df0a4f98b4ae..486c7411b9a7 100644
--- a/drivers/usb/serial/cp2101.c
+++ b/drivers/usb/serial/cp2101.c
@@ -26,7 +26,7 @@
 #include <linux/moduleparam.h>
 #include <linux/usb.h>
 #include <asm/uaccess.h>
-#include "usb-serial.h"
+#include <linux/usb/serial.h>
 
 /*
  * Version Information
diff --git a/drivers/usb/serial/cyberjack.c b/drivers/usb/serial/cyberjack.c
index 49b51ab0d4cb..6286aba86fae 100644
--- a/drivers/usb/serial/cyberjack.c
+++ b/drivers/usb/serial/cyberjack.c
@@ -39,7 +39,7 @@
 #include <linux/spinlock.h>
 #include <asm/uaccess.h>
 #include <linux/usb.h>
-#include "usb-serial.h"
+#include <linux/usb/serial.h>
 
 #define CYBERJACK_LOCAL_BUF_SIZE 32
 
diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c
index 4ff2dfb299bd..ee70fddcab60 100644
--- a/drivers/usb/serial/cypress_m8.c
+++ b/drivers/usb/serial/cypress_m8.c
@@ -59,11 +59,11 @@
 #include <linux/moduleparam.h>
 #include <linux/spinlock.h>
 #include <linux/usb.h>
+#include <linux/usb/serial.h>
 #include <linux/serial.h>
 #include <linux/delay.h>
 #include <asm/uaccess.h>
 
-#include "usb-serial.h"
 #include "cypress_m8.h"
 
 
diff --git a/drivers/usb/serial/digi_acceleport.c b/drivers/usb/serial/digi_acceleport.c
index 6953d3ef5738..9b225183fc7a 100644
--- a/drivers/usb/serial/digi_acceleport.c
+++ b/drivers/usb/serial/digi_acceleport.c
@@ -246,7 +246,7 @@
 #include <asm/uaccess.h>
 #include <linux/usb.h>
 #include <linux/wait.h>
-#include "usb-serial.h"
+#include <linux/usb/serial.h>
 
 /* Defines */
 
diff --git a/drivers/usb/serial/empeg.c b/drivers/usb/serial/empeg.c
index 1e2b31eeb497..daafe405d86d 100644
--- a/drivers/usb/serial/empeg.c
+++ b/drivers/usb/serial/empeg.c
@@ -62,7 +62,7 @@
 #include <linux/spinlock.h>
 #include <asm/uaccess.h>
 #include <linux/usb.h>
-#include "usb-serial.h"
+#include <linux/usb/serial.h>
 
 static int debug;
 
diff --git a/drivers/usb/serial/ezusb.c b/drivers/usb/serial/ezusb.c
index debc3b0f9662..5169c2d154ab 100644
--- a/drivers/usb/serial/ezusb.c
+++ b/drivers/usb/serial/ezusb.c
@@ -15,7 +15,7 @@
 #include <linux/tty.h>
 #include <linux/module.h>
 #include <linux/usb.h>
-#include "usb-serial.h"
+#include <linux/usb/serial.h>
 
 /* EZ-USB Control and Status Register.  Bit 0 controls 8051 reset */
 #define CPUCS_REG    0x7F92
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 8a74b19f1283..b458aedc5fb6 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -257,7 +257,7 @@
 #include <asm/uaccess.h>
 #include <linux/usb.h>
 #include <linux/serial.h>
-#include "usb-serial.h"
+#include <linux/usb/serial.h>
 #include "ftdi_sio.h"
 
 /*
@@ -313,6 +313,7 @@ static struct usb_device_id id_table_combined [] = {
         { USB_DEVICE(FTDI_VID, FTDI_8U232AM_PID) },
         { USB_DEVICE(FTDI_VID, FTDI_8U232AM_ALT_PID) },
         { USB_DEVICE(FTDI_VID, FTDI_8U2232C_PID) },
+        { USB_DEVICE(FTDI_VID, FTDI_MICRO_CHAMELEON_PID) },
         { USB_DEVICE(FTDI_VID, FTDI_RELAIS_PID) },
         { USB_DEVICE(INTERBIOMETRICS_VID, INTERBIOMETRICS_IOBOARD_PID) },
         { USB_DEVICE(INTERBIOMETRICS_VID, INTERBIOMETRICS_MINI_IOBOARD_PID) },
@@ -500,6 +501,8 @@ static struct usb_device_id id_table_combined [] = {
         { USB_DEVICE(PAPOUCH_VID, PAPOUCH_TMU_PID) },
         { USB_DEVICE(FTDI_VID, FTDI_ACG_HFDUAL_PID) },
         { USB_DEVICE(FTDI_VID, FTDI_YEI_SERVOCENTER31_PID) },
+        { USB_DEVICE(FTDI_VID, FTDI_THORLABS_PID) },
+        { USB_DEVICE(TESTO_VID, TESTO_USB_INTERFACE_PID) },
         { },                                    /* Optional parameter entry */
         { }                                     /* Terminating entry */
 };
@@ -548,11 +551,17 @@ struct ftdi_private {
         spinlock_t rx_lock;     /* spinlock for receive state */
         struct work_struct rx_work;
         int rx_processed;
+        unsigned long rx_bytes;
 
         __u16 interface;        /* FT2232C port interface (0 for FT232/245) */
 
         int force_baud;         /* if non-zero, force the baud rate to this value */
         int force_rtscts;       /* if non-zero, force RTS-CTS to always be enabled */
+
+        spinlock_t tx_lock;     /* spinlock for transmit state */
+        unsigned long tx_bytes;
+        unsigned long tx_outstanding_bytes;
+        unsigned long tx_outstanding_urbs;
 };
 
 /* Used for TIOCMIWAIT */
@@ -626,6 +635,9 @@ static struct usb_serial_driver ftdi_sio_device = {
 #define HIGH 1
 #define LOW 0
 
+/* number of outstanding urbs to prevent userspace DoS from happening */
+#define URB_UPPER_LIMIT 42
+
 /*
  * ***************************************************************************
  * Utlity functions
@@ -1156,6 +1168,7 @@ static int ftdi_sio_attach (struct usb_serial *serial)
         }
 
         spin_lock_init(&priv->rx_lock);
+        spin_lock_init(&priv->tx_lock);
         init_waitqueue_head(&priv->delta_msr_wait);
         /* This will push the characters through immediately rather
            than queue a task to deliver them */
@@ -1270,6 +1283,13 @@ static int  ftdi_open (struct usb_serial_port *port, struct file *filp)
 
         dbg("%s", __FUNCTION__);
 
+        spin_lock_irqsave(&priv->tx_lock, flags);
+        priv->tx_bytes = 0;
+        spin_unlock_irqrestore(&priv->tx_lock, flags);
+        spin_lock_irqsave(&priv->rx_lock, flags);
+        priv->rx_bytes = 0;
+        spin_unlock_irqrestore(&priv->rx_lock, flags);
+
         if (port->tty)
                 port->tty->low_latency = (priv->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
 
@@ -1372,6 +1392,7 @@ static int ftdi_write (struct usb_serial_port *port,
         int data_offset ;       /* will be 1 for the SIO and 0 otherwise */
         int status;
         int transfer_size;
+        unsigned long flags;
 
         dbg("%s port %d, %d bytes", __FUNCTION__, port->number, count);
 
@@ -1379,6 +1400,13 @@ static int ftdi_write (struct usb_serial_port *port,
                 dbg("write request of 0 bytes");
                 return 0;
         }
+        spin_lock_irqsave(&priv->tx_lock, flags);
+        if (priv->tx_outstanding_urbs > URB_UPPER_LIMIT) {
+                spin_unlock_irqrestore(&priv->tx_lock, flags);
+                dbg("%s - write limit hit\n", __FUNCTION__);
+                return 0;
+        }
+        spin_unlock_irqrestore(&priv->tx_lock, flags);
         
         data_offset = priv->write_offset;
         dbg("data_offset set to %d",data_offset);
@@ -1445,6 +1473,12 @@ static int ftdi_write (struct usb_serial_port *port,
                 err("%s - failed submitting write urb, error %d", __FUNCTION__, status);
                 count = status;
                 kfree (buffer);
+        } else {
+                spin_lock_irqsave(&priv->tx_lock, flags);
+                ++priv->tx_outstanding_urbs;
+                priv->tx_outstanding_bytes += count;
+                priv->tx_bytes += count;
+                spin_unlock_irqrestore(&priv->tx_lock, flags);
         }
 
         /* we are done with this urb, so let the host driver
@@ -1460,7 +1494,11 @@ static int ftdi_write (struct usb_serial_port *port,
 
 static void ftdi_write_bulk_callback (struct urb *urb, struct pt_regs *regs)
 {
+        unsigned long flags;
         struct usb_serial_port *port = (struct usb_serial_port *)urb->context;
+        struct ftdi_private *priv;
+        int data_offset;       /* will be 1 for the SIO and 0 otherwise */
+        unsigned long countback;
 
         /* free up the transfer buffer, as usb_free_urb() does not do this */
         kfree (urb->transfer_buffer);
@@ -1472,34 +1510,67 @@ static void ftdi_write_bulk_callback (struct urb *urb, struct pt_regs *regs)
                 return;
         }
 
+        priv = usb_get_serial_port_data(port);
+        if (!priv) {
+                dbg("%s - bad port private data pointer - exiting", __FUNCTION__);
+                return;
+        }
+        /* account for transferred data */
+        countback = urb->actual_length;
+        data_offset = priv->write_offset;
+        if (data_offset > 0) {
+                /* Subtract the control bytes */
+                countback -= (data_offset * ((countback + (PKTSZ - 1)) / PKTSZ));
+        }
+        spin_lock_irqsave(&priv->tx_lock, flags);
+        --priv->tx_outstanding_urbs;
+        priv->tx_outstanding_bytes -= countback;
+        spin_unlock_irqrestore(&priv->tx_lock, flags);
+
         usb_serial_port_softint(port);
 } /* ftdi_write_bulk_callback */
 
 
 static int ftdi_write_room( struct usb_serial_port *port )
 {
+        struct ftdi_private *priv = usb_get_serial_port_data(port);
+        int room;
+        unsigned long flags;
+
         dbg("%s - port %d", __FUNCTION__, port->number);
 
-        /*
-         * We really can take anything the user throws at us
-         * but let's pick a nice big number to tell the tty
-         * layer that we have lots of free space
-         */
-        return 2048;
+        spin_lock_irqsave(&priv->tx_lock, flags);
+        if (priv->tx_outstanding_urbs < URB_UPPER_LIMIT) {
+                /*
+                 * We really can take anything the user throws at us
+                 * but let's pick a nice big number to tell the tty
+                 * layer that we have lots of free space
+                 */
+                room = 2048;
+        } else {
+                room = 0;
+        }
+        spin_unlock_irqrestore(&priv->tx_lock, flags);
+        return room;
 } /* ftdi_write_room */
 
 
 static int ftdi_chars_in_buffer (struct usb_serial_port *port)
 { /* ftdi_chars_in_buffer */
+        struct ftdi_private *priv = usb_get_serial_port_data(port);
+        int buffered;
+        unsigned long flags;
+
         dbg("%s - port %d", __FUNCTION__, port->number);
 
-        /* 
-         * We can't really account for how much data we
-         * have sent out, but hasn't made it through to the
-         * device, so just tell the tty layer that everything
-         * is flushed.
-         */
-        return 0;
+        spin_lock_irqsave(&priv->tx_lock, flags);
+        buffered = (int)priv->tx_outstanding_bytes;
+        spin_unlock_irqrestore(&priv->tx_lock, flags);
+        if (buffered < 0) {
+                err("%s outstanding tx bytes is negative!", __FUNCTION__);
+                buffered = 0;
+        }
+        return buffered;
 } /* ftdi_chars_in_buffer */
 
 
@@ -1509,6 +1580,8 @@ static void ftdi_read_bulk_callback (struct urb *urb, struct pt_regs *regs)
         struct usb_serial_port *port = (struct usb_serial_port *)urb->context;
         struct tty_struct *tty;
         struct ftdi_private *priv;
+        unsigned long countread;
+        unsigned long flags;
 
         if (urb->number_of_packets > 0) {
                 err("%s transfer_buffer_length %d actual_length %d number of packets %d",__FUNCTION__,
@@ -1543,6 +1616,13 @@ static void ftdi_read_bulk_callback (struct urb *urb, struct pt_regs *regs)
                 return;
         }
 
+        /* count data bytes, but not status bytes */
+        countread = urb->actual_length;
+        countread -= 2 * ((countread + (PKTSZ - 1)) / PKTSZ);
+        spin_lock_irqsave(&priv->rx_lock, flags);
+        priv->rx_bytes += countread;
+        spin_unlock_irqrestore(&priv->rx_lock, flags);
+
         ftdi_process_read(port);
 
 } /* ftdi_read_bulk_callback */
diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h
index 6ab2ac845bd7..04ef90fcb876 100644
--- a/drivers/usb/serial/ftdi_sio.h
+++ b/drivers/usb/serial/ftdi_sio.h
@@ -36,6 +36,9 @@
 #define FTDI_ACTZWAVE_PID       0xF2D0
 
 
+/* www.starting-point-systems.com µChameleon device */
+#define FTDI_MICRO_CHAMELEON_PID        0xCAA0  /* Product Id */
+
 /* www.irtrans.de device */
 #define FTDI_IRTRANS_PID 0xFC60 /* Product Id */
 
@@ -442,6 +445,18 @@
  */
 #define FTDI_YEI_SERVOCENTER31_PID      0xE050  /* YEI ServoCenter3.1 USB */
 
+/*
+ * ThorLabs USB motor drivers
+ */
+#define FTDI_THORLABS_PID               0xfaf0 /* ThorLabs USB motor drivers */
+
+/*
+ * Testo products (http://www.testo.com/)
+ * Submitted by Colin Leroy
+ */
+#define TESTO_VID                       0x128D
+#define TESTO_USB_INTERFACE_PID         0x0001
+
 /* Commands */
 #define FTDI_SIO_RESET          0 /* Reset the port */
 #define FTDI_SIO_MODEM_CTRL     1 /* Set the modem control register */
diff --git a/drivers/usb/serial/funsoft.c b/drivers/usb/serial/funsoft.c
index 803721b97e2e..77b977206a8c 100644
--- a/drivers/usb/serial/funsoft.c
+++ b/drivers/usb/serial/funsoft.c
@@ -13,7 +13,7 @@
 #include <linux/tty.h>
 #include <linux/module.h>
 #include <linux/usb.h>
-#include "usb-serial.h"
+#include <linux/usb/serial.h>
 
 static struct usb_device_id id_table [] = {
         { USB_DEVICE(0x1404, 0xcddc) },
diff --git a/drivers/usb/serial/garmin_gps.c b/drivers/usb/serial/garmin_gps.c
index 1f5d1620baa1..727852634be9 100644
--- a/drivers/usb/serial/garmin_gps.c
+++ b/drivers/usb/serial/garmin_gps.c
@@ -35,6 +35,7 @@
 #include <linux/spinlock.h>
 #include <asm/uaccess.h>
 #include <linux/usb.h>
+#include <linux/usb/serial.h>
 
 /* the mode to be set when the port ist opened */
 static int initial_mode = 1;
@@ -42,8 +43,6 @@ static int initial_mode = 1;
 /* debug flag */
 static int debug = 0;
 
-#include "usb-serial.h"
-
 #define GARMIN_VENDOR_ID             0x091E
 
 /*
diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c
index 945b8bb38c92..172713556393 100644
--- a/drivers/usb/serial/generic.c
+++ b/drivers/usb/serial/generic.c
@@ -17,8 +17,8 @@
 #include <linux/module.h>
 #include <linux/moduleparam.h>
 #include <linux/usb.h>
+#include <linux/usb/serial.h>
 #include <asm/uaccess.h>
-#include "usb-serial.h"
 
 static int debug;
 
@@ -285,6 +285,7 @@ void usb_serial_generic_read_bulk_callback (struct urb *urb, struct pt_regs *reg
         if (result)
                 dev_err(&port->dev, "%s - failed resubmitting read urb, error %d\n", __FUNCTION__, result);
 }
+EXPORT_SYMBOL_GPL(usb_serial_generic_read_bulk_callback);
 
 void usb_serial_generic_write_bulk_callback (struct urb *urb, struct pt_regs *regs)
 {
diff --git a/drivers/usb/serial/hp4x.c b/drivers/usb/serial/hp4x.c
index 7e06358b0310..ebcac701b069 100644
--- a/drivers/usb/serial/hp4x.c
+++ b/drivers/usb/serial/hp4x.c
@@ -17,7 +17,7 @@
 #include <linux/tty.h>
 #include <linux/module.h>
 #include <linux/usb.h>
-#include "usb-serial.h"
+#include <linux/usb/serial.h>
 
 /*
  * Version Information
diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c
index bd2c05dac2a9..c49976c3ad52 100644
--- a/drivers/usb/serial/io_edgeport.c
+++ b/drivers/usb/serial/io_edgeport.c
@@ -44,7 +44,7 @@
 #include <linux/wait.h>
 #include <asm/uaccess.h>
 #include <linux/usb.h>
-#include "usb-serial.h"
+#include <linux/usb/serial.h>
 #include "io_edgeport.h"
 #include "io_ionsp.h"           /* info for the iosp messages */
 #include "io_16654.h"           /* 16654 UART defines */
diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c
index 723a12ae87b5..17c5b1d2311a 100644
--- a/drivers/usb/serial/io_ti.c
+++ b/drivers/usb/serial/io_ti.c
@@ -39,8 +39,8 @@
 #include <asm/uaccess.h>
 #include <asm/semaphore.h>
 #include <linux/usb.h>
+#include <linux/usb/serial.h>
 
-#include "usb-serial.h"
 #include "io_16654.h"
 #include "io_usbvend.h"
 #include "io_ti.h"
diff --git a/drivers/usb/serial/ipaq.c b/drivers/usb/serial/ipaq.c
index dbcfe172a5cc..59c5d999009a 100644
--- a/drivers/usb/serial/ipaq.c
+++ b/drivers/usb/serial/ipaq.c
@@ -55,7 +55,7 @@
 #include <linux/spinlock.h>
 #include <asm/uaccess.h>
 #include <linux/usb.h>
-#include "usb-serial.h"
+#include <linux/usb/serial.h>
 #include "ipaq.h"
 
 #define KP_RETRIES      100
@@ -70,6 +70,8 @@
 
 static __u16 product, vendor;
 static int debug;
+static int connect_retries = KP_RETRIES;
+static int initial_wait;
 
 /* Function prototypes for an ipaq */
 static int  ipaq_open (struct usb_serial_port *port, struct file *filp);
@@ -582,7 +584,7 @@ static int ipaq_open(struct usb_serial_port *port, struct file *filp)
         struct ipaq_private     *priv;
         struct ipaq_packet      *pkt;
         int                     i, result = 0;
-        int                     retries = KP_RETRIES;
+        int                     retries = connect_retries;
 
         dbg("%s - port %d", __FUNCTION__, port->number);
 
@@ -646,16 +648,12 @@ static int ipaq_open(struct usb_serial_port *port, struct file *filp)
         port->read_urb->transfer_buffer_length = URBDATA_SIZE;
         port->bulk_out_size = port->write_urb->transfer_buffer_length = URBDATA_SIZE;
         
+        msleep(1000*initial_wait);
         /* Start reading from the device */
         usb_fill_bulk_urb(port->read_urb, serial->dev, 
                       usb_rcvbulkpipe(serial->dev, port->bulk_in_endpointAddress),
                       port->read_urb->transfer_buffer, port->read_urb->transfer_buffer_length,
                       ipaq_read_bulk_callback, port);
-        result = usb_submit_urb(port->read_urb, GFP_KERNEL);
-        if (result) {
-                err("%s - failed submitting read urb, error %d", __FUNCTION__, result);
-                goto error;
-        }
 
         /*
          * Send out control message observed in win98 sniffs. Not sure what
@@ -670,8 +668,14 @@ static int ipaq_open(struct usb_serial_port *port, struct file *filp)
                                 usb_sndctrlpipe(serial->dev, 0), 0x22, 0x21,
                                 0x1, 0, NULL, 0, 100);
                 if (result == 0) {
+                        result = usb_submit_urb(port->read_urb, GFP_KERNEL);
+                        if (result) {
+                                err("%s - failed submitting read urb, error %d", __FUNCTION__, result);
+                                goto error;
+                        }
                         return 0;
                 }
+                msleep(1000);
         }
         err("%s - failed doing control urb, error %d", __FUNCTION__, result);
         goto error;
@@ -854,6 +858,7 @@ static void ipaq_write_bulk_callback(struct urb *urb, struct pt_regs *regs)
         
         if (urb->status) {
                 dbg("%s - nonzero write bulk status received: %d", __FUNCTION__, urb->status);
+                return;
         }
 
         spin_lock_irqsave(&write_list_lock, flags);
@@ -966,3 +971,9 @@ MODULE_PARM_DESC(vendor, "User specified USB idVendor");
 
 module_param(product, ushort, 0);
 MODULE_PARM_DESC(product, "User specified USB idProduct");
+
+module_param(connect_retries, int, S_IRUGO|S_IWUSR);
+MODULE_PARM_DESC(connect_retries, "Maximum number of connect retries (one second each)");
+
+module_param(initial_wait, int, S_IRUGO|S_IWUSR);
+MODULE_PARM_DESC(initial_wait, "Time to wait before attempting a connection (in seconds)");
diff --git a/drivers/usb/serial/ipw.c b/drivers/usb/serial/ipw.c
index a4a0bfeaab00..87306cb6f9f5 100644
--- a/drivers/usb/serial/ipw.c
+++ b/drivers/usb/serial/ipw.c
@@ -46,8 +46,8 @@
 #include <linux/module.h>
 #include <linux/spinlock.h>
 #include <linux/usb.h>
+#include <linux/usb/serial.h>
 #include <asm/uaccess.h>
-#include "usb-serial.h"
 
 /*
  * Version Information
@@ -373,6 +373,8 @@ static void ipw_write_bulk_callback(struct urb *urb, struct pt_regs *regs)
 
         dbg("%s", __FUNCTION__);
 
+        port->write_urb_busy = 0;
+
         if (urb->status)
                 dbg("%s - nonzero write bulk status received: %d", __FUNCTION__, urb->status);
 
diff --git a/drivers/usb/serial/ir-usb.c b/drivers/usb/serial/ir-usb.c
index 2cf1fed3de43..1738b0b6a376 100644
--- a/drivers/usb/serial/ir-usb.c
+++ b/drivers/usb/serial/ir-usb.c
@@ -57,7 +57,7 @@
 #include <linux/spinlock.h>
 #include <asm/uaccess.h>
 #include <linux/usb.h>
-#include "usb-serial.h"
+#include <linux/usb/serial.h>
 
 /*
  * Version Information
diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c
index d7c58f1bc960..015ad6cc1bbb 100644
--- a/drivers/usb/serial/keyspan.c
+++ b/drivers/usb/serial/keyspan.c
@@ -107,7 +107,7 @@
 #include <linux/spinlock.h>
 #include <asm/uaccess.h>
 #include <linux/usb.h>
-#include "usb-serial.h"
+#include <linux/usb/serial.h>
 #include "keyspan.h"
 
 static int debug;
diff --git a/drivers/usb/serial/keyspan_pda.c b/drivers/usb/serial/keyspan_pda.c
index 03ab3c0f3cce..49b8dc039d1f 100644
--- a/drivers/usb/serial/keyspan_pda.c
+++ b/drivers/usb/serial/keyspan_pda.c
@@ -78,6 +78,7 @@
 #include <linux/workqueue.h>
 #include <asm/uaccess.h>
 #include <linux/usb.h>
+#include <linux/usb/serial.h>
 
 static int debug;
 
@@ -107,8 +108,6 @@ struct ezusb_hex_record {
 #include "xircom_pgs_fw.h"
 #endif
 
-#include "usb-serial.h"
-
 /*
  * Version Information
  */
diff --git a/drivers/usb/serial/kl5kusb105.c b/drivers/usb/serial/kl5kusb105.c
index b45ff3e7ab40..2a2f3e2da055 100644
--- a/drivers/usb/serial/kl5kusb105.c
+++ b/drivers/usb/serial/kl5kusb105.c
@@ -55,7 +55,7 @@
 #include <linux/module.h>
 #include <asm/uaccess.h>
 #include <linux/usb.h>
-#include "usb-serial.h"
+#include <linux/usb/serial.h>
 #include "kl5kusb105.h"
 
 static int debug;
diff --git a/drivers/usb/serial/kobil_sct.c b/drivers/usb/serial/kobil_sct.c
index 457733374772..d50dce034958 100644
--- a/drivers/usb/serial/kobil_sct.c
+++ b/drivers/usb/serial/kobil_sct.c
@@ -46,8 +46,8 @@
 #include <linux/spinlock.h>
 #include <asm/uaccess.h>
 #include <linux/usb.h>
+#include <linux/usb/serial.h>
 #include <linux/ioctl.h>
-#include "usb-serial.h"
 #include "kobil_sct.h"
 
 static int debug;
diff --git a/drivers/usb/serial/mct_u232.c b/drivers/usb/serial/mct_u232.c
index ca05d3275f3e..f4d4305c2c02 100644
--- a/drivers/usb/serial/mct_u232.c
+++ b/drivers/usb/serial/mct_u232.c
@@ -75,7 +75,7 @@
 #include <linux/spinlock.h>
 #include <asm/uaccess.h>
 #include <linux/usb.h>
-#include "usb-serial.h"
+#include <linux/usb/serial.h>
 #include "mct_u232.h"
 
 /*
diff --git a/drivers/usb/serial/navman.c b/drivers/usb/serial/navman.c
index 7f544081032e..ac3f8b5d2c49 100644
--- a/drivers/usb/serial/navman.c
+++ b/drivers/usb/serial/navman.c
@@ -14,7 +14,7 @@
 #include <linux/tty_flip.h>
 #include <linux/module.h>
 #include <linux/usb.h>
-#include "usb-serial.h"
+#include <linux/usb/serial.h>
 
 static int debug;
 
diff --git a/drivers/usb/serial/omninet.c b/drivers/usb/serial/omninet.c
index cfb711a21a45..e49f40913c27 100644
--- a/drivers/usb/serial/omninet.c
+++ b/drivers/usb/serial/omninet.c
@@ -46,7 +46,7 @@
 #include <linux/spinlock.h>
 #include <asm/uaccess.h>
 #include <linux/usb.h>
-#include "usb-serial.h"
+#include <linux/usb/serial.h>
 
 static int debug;
 
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 78ad4b3126a6..f0530c1d7b7a 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -35,6 +35,7 @@
   2006-06-01  v0.6.2 add backwards-compatibility stuff
   2006-06-01  v0.6.3 add Novatel Wireless
   2006-06-01  v0.7   Option => GSM
+  2006-06-01  v0.7.1 add COBRA2
 
   Work sponsored by: Sigos GmbH, Germany <info@sigos.de>
 
@@ -53,7 +54,7 @@
   device features.
 */
 
-#define DRIVER_VERSION "v0.7.0"
+#define DRIVER_VERSION "v0.7.1"
 #define DRIVER_AUTHOR "Matthias Urlichs <smurf@smurf.noris.de>"
 #define DRIVER_DESC "USB Driver for GSM modems"
 
@@ -64,7 +65,7 @@
 #include <linux/tty_flip.h>
 #include <linux/module.h>
 #include <linux/usb.h>
-#include "usb-serial.h"
+#include <linux/usb/serial.h>
 
 /* Function prototypes */
 static int  option_open(struct usb_serial_port *port, struct file *filp);
@@ -102,6 +103,7 @@ static int  option_send_setup(struct usb_serial_port *port);
 #define OPTION_PRODUCT_FUSION           0x6000
 #define OPTION_PRODUCT_FUSION2          0x6300
 #define OPTION_PRODUCT_COBRA            0x6500
+#define OPTION_PRODUCT_COBRA2           0x6600
 #define HUAWEI_PRODUCT_E600             0x1001
 #define AUDIOVOX_PRODUCT_AIRCARD        0x0112
 #define SIERRAWIRELESS_PRODUCT_MC8755   0x6802
@@ -112,6 +114,7 @@ static struct usb_device_id option_ids[] = {
         { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_FUSION) },
         { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_FUSION2) },
         { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COBRA) },
+        { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COBRA2) },
         { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E600) },
         { USB_DEVICE(AUDIOVOX_VENDOR_ID, AUDIOVOX_PRODUCT_AIRCARD) },
         { USB_DEVICE(SIERRAWIRELESS_VENDOR_ID, SIERRAWIRELESS_PRODUCT_MC8755) },
@@ -124,6 +127,7 @@ static struct usb_device_id option_ids1[] = {
         { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_FUSION) },
         { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_FUSION2) },
         { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COBRA) },
+        { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COBRA2) },
         { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E600) },
         { USB_DEVICE(AUDIOVOX_VENDOR_ID, AUDIOVOX_PRODUCT_AIRCARD) },
         { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID,NOVATELWIRELESS_PRODUCT_U740) },
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index de93a2b909e7..259db31b65c1 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -27,7 +27,7 @@
 #include <linux/spinlock.h>
 #include <asm/uaccess.h>
 #include <linux/usb.h>
-#include "usb-serial.h"
+#include <linux/usb/serial.h>
 #include "pl2303.h"
 
 /*
@@ -52,6 +52,7 @@ struct pl2303_buf {
 static struct usb_device_id id_table [] = {
         { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID) },
         { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_RSAQ2) },
+        { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_DCU11) },
         { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_RSAQ3) },
         { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_PHAROS) },
         { USB_DEVICE(IODATA_VENDOR_ID, IODATA_PRODUCT_ID) },
@@ -79,6 +80,7 @@ static struct usb_device_id id_table [] = {
         { USB_DEVICE(LEADTEK_VENDOR_ID, LEADTEK_9531_PRODUCT_ID) },
         { USB_DEVICE(SPEEDDRAGON_VENDOR_ID, SPEEDDRAGON_PRODUCT_ID) },
         { USB_DEVICE(OTI_VENDOR_ID, OTI_PRODUCT_ID) },
+        { USB_DEVICE(DATAPILOT_U2_VENDOR_ID, DATAPILOT_U2_PRODUCT_ID) },
         { }                                     /* Terminating entry */
 };
 
diff --git a/drivers/usb/serial/pl2303.h b/drivers/usb/serial/pl2303.h
index 7f29e81d3e35..d9c1e6e0b4b3 100644
--- a/drivers/usb/serial/pl2303.h
+++ b/drivers/usb/serial/pl2303.h
@@ -10,6 +10,7 @@
 #define PL2303_VENDOR_ID        0x067b
 #define PL2303_PRODUCT_ID       0x2303
 #define PL2303_PRODUCT_ID_RSAQ2         0x04bb
+#define PL2303_PRODUCT_ID_DCU11         0x1234
 #define PL2303_PRODUCT_ID_PHAROS        0xaaa0
 #define PL2303_PRODUCT_ID_RSAQ3         0xaaa2
 
@@ -84,3 +85,7 @@
 /* Ours Technology Inc DKU-5 clone, chipset: Prolific Technology Inc */
 #define OTI_VENDOR_ID   0x0ea0
 #define OTI_PRODUCT_ID  0x6858
+
+/* DATAPILOT Universal-2 Phone Cable */
+#define DATAPILOT_U2_VENDOR_ID  0x0731
+#define DATAPILOT_U2_PRODUCT_ID 0x2003
diff --git a/drivers/usb/serial/safe_serial.c b/drivers/usb/serial/safe_serial.c
index 897d8447252b..789771ecdb11 100644
--- a/drivers/usb/serial/safe_serial.c
+++ b/drivers/usb/serial/safe_serial.c
@@ -71,7 +71,7 @@
 #include <linux/spinlock.h>
 #include <asm/uaccess.h>
 #include <linux/usb.h>
-#include "usb-serial.h"
+#include <linux/usb/serial.h>
 
 
 #ifndef CONFIG_USB_SAFE_PADDED
diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c
new file mode 100644
index 000000000000..d29638daa987
--- /dev/null
+++ b/drivers/usb/serial/sierra.c
@@ -0,0 +1,75 @@
+/*
+ * Sierra Wireless CDMA Wireless Serial USB driver
+ *
+ * Current Copy modified by: Kevin Lloyd <linux@sierrawireless.com>
+ * Original Copyright (C) 2005-2006 Greg Kroah-Hartman <gregkh@suse.de>
+ *
+ *      This program is free software; you can redistribute it and/or
+ *      modify it under the terms of the GNU General Public License version
+ *      2 as published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/tty.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+#include <linux/usb/serial.h>
+
+static struct usb_device_id id_table [] = {
+        { USB_DEVICE(0x1199, 0x0018) }, /* Sierra Wireless MC5720 */
+        { USB_DEVICE(0x1199, 0x0020) }, /* Sierra Wireless MC5725 */
+        { USB_DEVICE(0x1199, 0x0017) }, /* Sierra Wireless EM5625 */
+        { USB_DEVICE(0x1199, 0x0019) }, /* Sierra Wireless AirCard 595 */
+        { USB_DEVICE(0x1199, 0x6802) }, /* Sierra Wireless MC8755 */
+        { USB_DEVICE(0x1199, 0x6803) }, /* Sierra Wireless MC8765 */
+        { USB_DEVICE(0x1199, 0x6812) }, /* Sierra Wireless MC8775 */
+        { USB_DEVICE(0x1199, 0x6820) }, /* Sierra Wireless AirCard 875 */
+        /* Following devices are supported in the airprime.c driver */
+        /* { USB_DEVICE(0x1199, 0x0112) }, */   /* Sierra Wireless AirCard 580 */
+        /* { USB_DEVICE(0x0F3D, 0x0112) }, */   /* AirPrime/Sierra PC 5220 */
+        { }
+};
+MODULE_DEVICE_TABLE(usb, id_table);
+
+static struct usb_driver sierra_driver = {
+        .name =         "sierra_wireless",
+        .probe =        usb_serial_probe,
+        .disconnect =   usb_serial_disconnect,
+        .id_table =     id_table,
+};
+
+static struct usb_serial_driver sierra_device = {
+        .driver = {
+        .owner =                THIS_MODULE,
+        .name =                 "Sierra_Wireless",
+        },
+        .id_table =             id_table,
+        .num_interrupt_in =     NUM_DONT_CARE,
+        .num_bulk_in =          NUM_DONT_CARE,
+        .num_bulk_out =         NUM_DONT_CARE,
+        .num_ports =            3,
+};
+
+static int __init sierra_init(void)
+{
+        int retval;
+
+        retval = usb_serial_register(&sierra_device);
+        if (retval)
+                return retval;
+        retval = usb_register(&sierra_driver);
+        if (retval)
+                usb_serial_deregister(&sierra_device);
+        return retval;
+}
+
+static void __exit sierra_exit(void)
+{
+        usb_deregister(&sierra_driver);
+        usb_serial_deregister(&sierra_device);
+}
+
+module_init(sierra_init);
+module_exit(sierra_exit);
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c
index a9afff31a921..ac9b8ee52d44 100644
--- a/drivers/usb/serial/ti_usb_3410_5052.c
+++ b/drivers/usb/serial/ti_usb_3410_5052.c
@@ -83,8 +83,8 @@
 #include <asm/uaccess.h>
 #include <asm/semaphore.h>
 #include <linux/usb.h>
+#include <linux/usb/serial.h>
 
-#include "usb-serial.h"
 #include "ti_usb_3410_5052.h"
 #include "ti_fw_3410.h"         /* firmware image for 3410 */
 #include "ti_fw_5052.h"         /* firmware image for 5052 */
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index b59a0536ea5c..12c1694d322e 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -31,7 +31,7 @@
 #include <linux/smp_lock.h>
 #include <asm/uaccess.h>
 #include <linux/usb.h>
-#include "usb-serial.h"
+#include <linux/usb/serial.h>
 #include "pl2303.h"
 
 /*
@@ -40,6 +40,8 @@
 #define DRIVER_AUTHOR "Greg Kroah-Hartman, greg@kroah.com, http://www.kroah.com/linux/"
 #define DRIVER_DESC "USB Serial Driver core"
 
+static void port_free(struct usb_serial_port *port);
+
 /* Driver structure we register with the USB core */
 static struct usb_driver usb_serial_driver = {
         .name =         "usbserial",
@@ -146,23 +148,10 @@ static void destroy_serial(struct kref *kref)
                         port = serial->port[i];
                         if (!port)
                                 continue;
-                        usb_kill_urb(port->read_urb);
-                        usb_free_urb(port->read_urb);
-                        usb_kill_urb(port->write_urb);
-                        usb_free_urb(port->write_urb);
-                        usb_kill_urb(port->interrupt_in_urb);
-                        usb_free_urb(port->interrupt_in_urb);
-                        usb_kill_urb(port->interrupt_out_urb);
-                        usb_free_urb(port->interrupt_out_urb);
-                        kfree(port->bulk_in_buffer);
-                        kfree(port->bulk_out_buffer);
-                        kfree(port->interrupt_in_buffer);
-                        kfree(port->interrupt_out_buffer);
+                        port_free(port);
                 }
         }
 
-        flush_scheduled_work();         /* port->work */
-
         usb_put_dev(serial->dev);
 
         /* free up any memory that we allocated */
@@ -564,6 +553,11 @@ static void port_release(struct device *dev)
         struct usb_serial_port *port = to_usb_serial_port(dev);
 
         dbg ("%s - %s", __FUNCTION__, dev->bus_id);
+        port_free(port);
+}
+
+static void port_free(struct usb_serial_port *port)
+{
         usb_kill_urb(port->read_urb);
         usb_free_urb(port->read_urb);
         usb_kill_urb(port->write_urb);
@@ -576,6 +570,7 @@ static void port_release(struct device *dev)
         kfree(port->bulk_out_buffer);
         kfree(port->interrupt_in_buffer);
         kfree(port->interrupt_out_buffer);
+        flush_scheduled_work();         /* port->work */
         kfree(port);
 }
 
diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c
index 95a2936e902e..88949f7884ca 100644
--- a/drivers/usb/serial/visor.c
+++ b/drivers/usb/serial/visor.c
@@ -25,7 +25,7 @@
 #include <linux/spinlock.h>
 #include <asm/uaccess.h>
 #include <linux/usb.h>
-#include "usb-serial.h"
+#include <linux/usb/serial.h>
 #include "visor.h"
 
 /*
@@ -302,7 +302,6 @@ static int visor_open (struct usb_serial_port *port, struct file *filp)
         spin_lock_irqsave(&priv->lock, flags);
         priv->bytes_in = 0;
         priv->bytes_out = 0;
-        priv->outstanding_urbs = 0;
         priv->throttled = 0;
         spin_unlock_irqrestore(&priv->lock, flags);
 
@@ -435,13 +434,25 @@ static int visor_write (struct usb_serial_port *port, const unsigned char *buf,
 
 static int visor_write_room (struct usb_serial_port *port)
 {
+        struct visor_private *priv = usb_get_serial_port_data(port);
+        unsigned long flags;
+
         dbg("%s - port %d", __FUNCTION__, port->number);
 
         /*
          * We really can take anything the user throws at us
          * but let's pick a nice big number to tell the tty
-         * layer that we have lots of free space
+         * layer that we have lots of free space, unless we don't.
          */
+
+        spin_lock_irqsave(&priv->lock, flags);
+        if (priv->outstanding_urbs > URB_UPPER_LIMIT * 2 / 3) {
+                spin_unlock_irqrestore(&priv->lock, flags);
+                dbg("%s - write limit hit\n", __FUNCTION__);
+                return 0;
+        }
+        spin_unlock_irqrestore(&priv->lock, flags);
+
         return 2048;
 }
 
@@ -758,15 +769,22 @@ static int visor_calc_num_ports (struct usb_serial *serial)
 
 static int generic_startup(struct usb_serial *serial)
 {
+        struct usb_serial_port **ports = serial->port;
         struct visor_private *priv;
         int i;
 
         for (i = 0; i < serial->num_ports; ++i) {
                 priv = kzalloc (sizeof(*priv), GFP_KERNEL);
-                if (!priv)
+                if (!priv) {
+                        while (i-- != 0) {
+                                priv = usb_get_serial_port_data(ports[i]);
+                                usb_set_serial_port_data(ports[i], NULL);
+                                kfree(priv);
+                        }
                         return -ENOMEM;
+                }
                 spin_lock_init(&priv->lock);
-                usb_set_serial_port_data(serial->port[i], priv);
+                usb_set_serial_port_data(ports[i], priv);
         }
         return 0;
 }
@@ -876,7 +894,18 @@ static int clie_5_attach (struct usb_serial *serial)
 
 static void visor_shutdown (struct usb_serial *serial)
 {
+        struct visor_private *priv;
+        int i;
+
         dbg("%s", __FUNCTION__);
+
+        for (i = 0; i < serial->num_ports; i++) {
+                priv = usb_get_serial_port_data(serial->port[i]);
+                if (priv) {
+                        usb_set_serial_port_data(serial->port[i], NULL);
+                        kfree(priv);
+                }
+        }
 }
 
 static int visor_ioctl (struct usb_serial_port *port, struct file * file, unsigned int cmd, unsigned long arg)
diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c
index 540438c3f381..6e6c7934be32 100644
--- a/drivers/usb/serial/whiteheat.c
+++ b/drivers/usb/serial/whiteheat.c
@@ -79,7 +79,7 @@
 #include <linux/usb.h>
 #include <linux/serial_reg.h>
 #include <linux/serial.h>
-#include "usb-serial.h"
+#include <linux/usb/serial.h>
 #include "whiteheat_fw.h"               /* firmware for the ConnectTech WhiteHEAT device */
 #include "whiteheat.h"                  /* WhiteHEAT specific commands */
 
diff --git a/drivers/usb/storage/scsiglue.c b/drivers/usb/storage/scsiglue.c
index 5715291ba540..a4b7df9ff8c1 100644
--- a/drivers/usb/storage/scsiglue.c
+++ b/drivers/usb/storage/scsiglue.c
@@ -112,13 +112,11 @@ static int slave_configure(struct scsi_device *sdev)
         if (sdev->scsi_level < SCSI_2)
                 sdev->scsi_level = sdev->sdev_target->scsi_level = SCSI_2;
 
-        /* According to the technical support people at Genesys Logic,
-         * devices using their chips have problems transferring more than
-         * 32 KB at a time.  In practice people have found that 64 KB
-         * works okay and that's what Windows does.  But we'll be
-         * conservative; people can always use the sysfs interface to
-         * increase max_sectors. */
-        if (le16_to_cpu(us->pusb_dev->descriptor.idVendor) == USB_VENDOR_ID_GENESYS &&
+        /* Many devices have trouble transfering more than 32KB at a time,
+         * while others have trouble with more than 64K. At this time we
+         * are limiting both to 32K (64 sectores).
+         */
+        if ((us->flags & US_FL_MAX_SECTORS_64) &&
                         sdev->request_queue->max_sectors > 64)
                 blk_queue_max_sectors(sdev->request_queue, 64);
 
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index c7e84e653df9..a5ca449f6e64 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -112,6 +112,19 @@ UNUSUAL_DEV(  0x0411, 0x001c, 0x0113, 0x0113,
                 US_SC_DEVICE, US_PR_DEVICE, NULL,
                 US_FL_FIX_INQUIRY ),
 
+/* Submitted by Ernestas Vaiciukevicius <ernisv@gmail.com> */
+UNUSUAL_DEV(  0x0419, 0x0100, 0x0100, 0x0100,
+                "Samsung Info. Systems America, Inc.",
+                "MP3 Player",
+                US_SC_DEVICE, US_PR_DEVICE, NULL,
+                US_FL_IGNORE_RESIDUE ),
+
+/* Reported by Orgad Shaneh <orgads@gmail.com> */
+UNUSUAL_DEV(  0x0419, 0xaace, 0x0100, 0x0100,
+                "Samsung", "MP3 Player",
+                US_SC_DEVICE, US_PR_DEVICE, NULL,
+                US_FL_IGNORE_RESIDUE ),
+
 /* Reported by Christian Leber <christian@leber.de> */
 UNUSUAL_DEV(  0x0419, 0xaaf5, 0x0100, 0x0100,
                 "TrekStor",
@@ -132,6 +145,14 @@ UNUSUAL_DEV(  0x0420, 0x0001, 0x0100, 0x0100,
                 US_SC_DEVICE, US_PR_DEVICE, NULL,
                 US_FL_IGNORE_RESIDUE ),
 
+/* Reported by Sumedha Swamy <sumedhaswamy@gmail.com> and
+ * Einar Th. Einarsson <einarthered@gmail.com> */
+UNUSUAL_DEV(  0x0421, 0x0444, 0x0100, 0x0100,
+                "Nokia",
+                "N91",
+                US_SC_DEVICE, US_PR_DEVICE, NULL,
+                US_FL_IGNORE_RESIDUE | US_FL_FIX_CAPACITY ),
+
 /* Reported by Jiri Slaby <jirislaby@gmail.com> and
  * Rene C. Castberg <Rene@Castberg.org> */
 UNUSUAL_DEV(  0x0421, 0x0446, 0x0100, 0x0100,
@@ -140,6 +161,13 @@ UNUSUAL_DEV(  0x0421, 0x0446, 0x0100, 0x0100,
                 US_SC_DEVICE, US_PR_DEVICE, NULL,
                 US_FL_IGNORE_RESIDUE | US_FL_FIX_CAPACITY ),
 
+/* Reported by Matthew Bloch <matthew@bytemark.co.uk> */
+UNUSUAL_DEV(  0x0421, 0x044e, 0x0100, 0x0100,
+                "Nokia",
+                "E61",
+                US_SC_DEVICE, US_PR_DEVICE, NULL,
+                US_FL_IGNORE_RESIDUE | US_FL_FIX_CAPACITY ),
+
 /* Reported by Olaf Hering <olh@suse.de> from novell bug #105878 */
 UNUSUAL_DEV(  0x0424, 0x0fdc, 0x0210, 0x0210,
                 "SMSC",
@@ -473,10 +501,11 @@ UNUSUAL_DEV(  0x054c, 0x0010, 0x0106, 0x0450,
                 US_SC_SCSI, US_PR_DEVICE, NULL,
                 US_FL_SINGLE_LUN | US_FL_NOT_LOCKABLE | US_FL_NO_WP_DETECT ),
 
-/* This entry is needed because the device reports Sub=ff */
-UNUSUAL_DEV(  0x054c, 0x0010, 0x0500, 0x0600,
+/* Submitted by Lars Jacob <jacob.lars@googlemail.com>
+ * This entry is needed because the device reports Sub=ff */
+UNUSUAL_DEV(  0x054c, 0x0010, 0x0500, 0x0610,
                 "Sony",
-                "DSC-T1/T5",
+                "DSC-T1/T5/H5",
                 US_SC_8070, US_PR_DEVICE, NULL,
                 US_FL_SINGLE_LUN ),
 
@@ -708,18 +737,22 @@ UNUSUAL_DEV(  0x05dc, 0xb002, 0x0000, 0x0113,
  * They were originally reported by Alexander Oltu
  * <alexander@all-2.com> and Peter Marks <peter.marks@turner.com>
  * respectively.
+ *
+ * US_FL_GO_SLOW and US_FL_MAX_SECTORS_64 added by Phil Dibowitz
+ * <phil@ipom.com> as these flags were made and hard-coded
+ * special-cases were pulled from scsiglue.c.
  */
 UNUSUAL_DEV(  0x05e3, 0x0701, 0x0000, 0xffff,
                 "Genesys Logic",
                 "USB to IDE Optical",
                 US_SC_DEVICE, US_PR_DEVICE, NULL,
-                US_FL_GO_SLOW ),
+                US_FL_GO_SLOW | US_FL_MAX_SECTORS_64 ),
 
 UNUSUAL_DEV(  0x05e3, 0x0702, 0x0000, 0xffff,
                 "Genesys Logic",
                 "USB to IDE Disk",
                 US_SC_DEVICE, US_PR_DEVICE, NULL,
-                US_FL_GO_SLOW ),
+                US_FL_GO_SLOW | US_FL_MAX_SECTORS_64 ),
 
 /* Reported by Hanno Boeck <hanno@gmx.de>
  * Taken from the Lycoris Kernel */
@@ -1196,6 +1229,14 @@ UNUSUAL_DEV(  0x0ea0, 0x6828, 0x0110, 0x0110,
                 US_SC_DEVICE, US_PR_DEVICE, NULL,
                 US_FL_IGNORE_RESIDUE ),
 
+/* Reported by Benjamin Schiller <sbenni@gmx.de>
+ * It is also sold by Easylite as DJ 20 */
+UNUSUAL_DEV(  0x0ed1, 0x7636, 0x0103, 0x0103,
+                "Typhoon",
+                "My DJ 1820",
+                US_SC_DEVICE, US_PR_DEVICE, NULL,
+                US_FL_IGNORE_RESIDUE | US_FL_GO_SLOW | US_FL_MAX_SECTORS_64),
+
 /* Reported by Michael Stattmann <michael@stattmann.com> */
 UNUSUAL_DEV(  0x0fce, 0xd008, 0x0000, 0x0000,
                 "Sony Ericsson",
@@ -1227,6 +1268,15 @@ UNUSUAL_DEV(  0x1370, 0x6828, 0x0110, 0x0110,
                 US_SC_DEVICE, US_PR_DEVICE, NULL,
                 US_FL_IGNORE_RESIDUE ),
 
+/* patch submitted by Davide Perini <perini.davide@dpsoftware.org>
+ * and Renato Perini <rperini@email.it>
+ */
+UNUSUAL_DEV(  0x22b8, 0x3010, 0x0001, 0x0001,
+                "Motorola",
+                "RAZR V3x",
+                US_SC_DEVICE, US_PR_DEVICE, NULL,
+                US_FL_FIX_CAPACITY | US_FL_IGNORE_RESIDUE ),
+
 /* Reported by Radovan Garabik <garabik@kassiopeia.juls.savba.sk> */
 UNUSUAL_DEV(  0x2735, 0x100b, 0x0000, 0x9999,
                 "MPIO",
diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c
index 1185acac4b21..5ee19be52f65 100644
--- a/drivers/usb/storage/usb.c
+++ b/drivers/usb/storage/usb.c
@@ -55,6 +55,7 @@
 #include <linux/slab.h>
 #include <linux/kthread.h>
 #include <linux/mutex.h>
+#include <linux/utsrelease.h>
 
 #include <scsi/scsi.h>
 #include <scsi/scsi_cmnd.h>
@@ -373,8 +374,12 @@ static int usb_stor_control_thread(void * __us)
                 /* lock access to the state */
                 scsi_lock(host);
 
+                /* did the command already complete because of a disconnect? */
+                if (!us->srb)
+                        ;               /* nothing to do */
+
                 /* indicate that the command is done */
-                if (us->srb->result != DID_ABORT << 16) {
+                else if (us->srb->result != DID_ABORT << 16) {
                         US_DEBUGP("scsi cmd done, result=0x%x\n", 
                                    us->srb->result);
                         us->srb->scsi_done(us->srb);
@@ -524,7 +529,8 @@ static void get_device_info(struct us_data *us, const struct usb_device_id *id)
                 if (msg >= 0 && !(us->flags & US_FL_NEED_OVERRIDE))
                         printk(KERN_NOTICE USB_STORAGE "This device "
                                 "(%04x,%04x,%04x S %02x P %02x)"
-                                " has %s in unusual_devs.h\n"
+                                " has %s in unusual_devs.h (kernel"
+                                " %s)\n"
                                 "   Please send a copy of this message to "
                                 "<linux-usb-devel@lists.sourceforge.net>\n",
                                 le16_to_cpu(ddesc->idVendor),
@@ -532,7 +538,8 @@ static void get_device_info(struct us_data *us, const struct usb_device_id *id)
                                 le16_to_cpu(ddesc->bcdDevice),
                                 idesc->bInterfaceSubClass,
                                 idesc->bInterfaceProtocol,
-                                msgs[msg]);
+                                msgs[msg],
+                                UTS_RELEASE);
         }
 }
 
@@ -836,32 +843,34 @@ static void dissociate_dev(struct us_data *us)
  * the host */
 static void quiesce_and_remove_host(struct us_data *us)
 {
+        struct Scsi_Host *host = us_to_host(us);
+
         /* Prevent new USB transfers, stop the current command, and
          * interrupt a SCSI-scan or device-reset delay */
+        scsi_lock(host);
         set_bit(US_FLIDX_DISCONNECTING, &us->flags);
+        scsi_unlock(host);
         usb_stor_stop_transport(us);
         wake_up(&us->delay_wait);
 
         /* It doesn't matter if the SCSI-scanning thread is still running.
          * The thread will exit when it sees the DISCONNECTING flag. */
 
-        /* Wait for the current command to finish, then remove the host */
-        mutex_lock(&us->dev_mutex);
-        mutex_unlock(&us->dev_mutex);
-
         /* queuecommand won't accept any new commands and the control
          * thread won't execute a previously-queued command.  If there
          * is such a command pending, complete it with an error. */
+        mutex_lock(&us->dev_mutex);
         if (us->srb) {
                 us->srb->result = DID_NO_CONNECT << 16;
-                scsi_lock(us_to_host(us));
+                scsi_lock(host);
                 us->srb->scsi_done(us->srb);
                 us->srb = NULL;
-                scsi_unlock(us_to_host(us));
+                scsi_unlock(host);
         }
+        mutex_unlock(&us->dev_mutex);
 
         /* Now we own no commands so it's safe to remove the SCSI host */
-        scsi_remove_host(us_to_host(us));
+        scsi_remove_host(host);
 }
 
 /* Second stage of disconnect processing: deallocate all resources */
diff --git a/drivers/usb/storage/usb.h b/drivers/usb/storage/usb.h
index 5284abe1b5eb..21f3ddbc9080 100644
--- a/drivers/usb/storage/usb.h
+++ b/drivers/usb/storage/usb.h
@@ -176,8 +176,4 @@ extern void fill_inquiry_response(struct us_data *us,
 #define scsi_unlock(host)       spin_unlock_irq(host->host_lock)
 #define scsi_lock(host)         spin_lock_irq(host->host_lock)
 
-
-/* Vendor ID list for devices that require special handling */
-#define USB_VENDOR_ID_GENESYS           0x05e3  /* Genesys Logic */
-
 #endif
diff --git a/drivers/w1/masters/ds2482.c b/drivers/w1/masters/ds2482.c
index af492cc48db2..d93eb626b2f0 100644
--- a/drivers/w1/masters/ds2482.c
+++ b/drivers/w1/masters/ds2482.c
@@ -218,7 +218,7 @@ static int ds2482_wait_1wire_idle(struct ds2482_data *pdev)
                 do {
                         temp = i2c_smbus_read_byte(&pdev->client);
                 } while ((temp >= 0) && (temp & DS2482_REG_STS_1WB) &&
-                         (++retries > DS2482_WAIT_IDLE_TIMEOUT));
+                         (++retries < DS2482_WAIT_IDLE_TIMEOUT));
         }
 
         if (retries > DS2482_WAIT_IDLE_TIMEOUT)
diff --git a/drivers/w1/w1_io.h b/drivers/w1/w1_io.h
deleted file mode 100644
index 9a76d2ad69c5..000000000000
--- a/drivers/w1/w1_io.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- *      w1_io.h
- *
- * Copyright (c) 2004 Evgeniy Polyakov <johnpol@2ka.mipt.ru>
- *
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#ifndef __W1_IO_H
-#define __W1_IO_H
-
-#include "w1.h"
-
-u8 w1_triplet(struct w1_master *dev, int bdir);
-void w1_write_8(struct w1_master *, u8);
-int w1_reset_bus(struct w1_master *);
-u8 w1_calc_crc8(u8 *, int);
-void w1_write_block(struct w1_master *, const u8 *, int);
-u8 w1_read_block(struct w1_master *, u8 *, int);
-void w1_search_devices(struct w1_master *dev, w1_slave_found_callback cb);
-int w1_reset_select_slave(struct w1_slave *sl);
-
-#endif /* __W1_IO_H */
diff --git a/include/linux/i2c.h b/include/linux/i2c.h
index 526ddc8eecfb..eb0628a7ecc6 100644
--- a/include/linux/i2c.h
+++ b/include/linux/i2c.h
@@ -193,6 +193,8 @@ struct i2c_algorithm {
            to NULL. If an adapter algorithm can do SMBus access, set 
            smbus_xfer. If set to NULL, the SMBus protocol is simulated
            using common I2C messages */
+        /* master_xfer should return the number of messages successfully
+           processed, or a negative value on error */
         int (*master_xfer)(struct i2c_adapter *adap,struct i2c_msg *msgs, 
                            int num);
         int (*smbus_xfer) (struct i2c_adapter *adap, u16 addr, 
diff --git a/include/linux/ioport.h b/include/linux/ioport.h
index 5612dfeeae50..d42c83399071 100644
--- a/include/linux/ioport.h
+++ b/include/linux/ioport.h
@@ -97,7 +97,7 @@ extern struct resource iomem_resource;
 extern int request_resource(struct resource *root, struct resource *new);
 extern struct resource * ____request_resource(struct resource *root, struct resource *new);
 extern int release_resource(struct resource *new);
-extern __deprecated_for_modules int insert_resource(struct resource *parent, struct resource *new);
+extern int insert_resource(struct resource *parent, struct resource *new);
 extern int allocate_resource(struct resource *root, struct resource *new,
                              resource_size_t size, resource_size_t min,
                              resource_size_t max, resource_size_t align,
diff --git a/include/linux/pci.h b/include/linux/pci.h
index 983fca251b25..8565b81d7fbc 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -161,6 +161,7 @@ struct pci_dev {
         unsigned int    is_enabled:1;   /* pci_enable_device has been called */
         unsigned int    is_busmaster:1; /* device is busmaster */
         unsigned int    no_msi:1;       /* device may not use msi */
+        unsigned int    no_d1d2:1;   /* only allow d0 or d3 */
         unsigned int    block_ucfg_access:1;    /* userspace config space access is blocked */
         unsigned int    broken_parity_status:1; /* Device generates false positive parity */
         unsigned int    msi_enabled:1;
diff --git a/include/linux/pci_regs.h b/include/linux/pci_regs.h
index 6bce4a240364..96930cb5927c 100644
--- a/include/linux/pci_regs.h
+++ b/include/linux/pci_regs.h
@@ -422,7 +422,23 @@
 #define  PCI_ERR_CAP_ECRC_CHKE  0x00000100      /* ECRC Check Enable */
 #define PCI_ERR_HEADER_LOG      28      /* Header Log Register (16 bytes) */
 #define PCI_ERR_ROOT_COMMAND    44      /* Root Error Command */
+/* Correctable Err Reporting Enable */
+#define PCI_ERR_ROOT_CMD_COR_EN         0x00000001
+/* Non-fatal Err Reporting Enable */
+#define PCI_ERR_ROOT_CMD_NONFATAL_EN    0x00000002
+/* Fatal Err Reporting Enable */
+#define PCI_ERR_ROOT_CMD_FATAL_EN       0x00000004
 #define PCI_ERR_ROOT_STATUS     48
+#define PCI_ERR_ROOT_COR_RCV            0x00000001      /* ERR_COR Received */
+/* Multi ERR_COR Received */
+#define PCI_ERR_ROOT_MULTI_COR_RCV      0x00000002
+/* ERR_FATAL/NONFATAL Recevied */
+#define PCI_ERR_ROOT_UNCOR_RCV          0x00000004
+/* Multi ERR_FATAL/NONFATAL Recevied */
+#define PCI_ERR_ROOT_MULTI_UNCOR_RCV    0x00000008
+#define PCI_ERR_ROOT_FIRST_FATAL        0x00000010      /* First Fatal */
+#define PCI_ERR_ROOT_NONFATAL_RCV       0x00000020      /* Non-Fatal Received */
+#define PCI_ERR_ROOT_FATAL_RCV          0x00000040      /* Fatal Received */
 #define PCI_ERR_ROOT_COR_SRC    52
 #define PCI_ERR_ROOT_SRC        54
 
diff --git a/include/linux/pm_legacy.h b/include/linux/pm_legacy.h
index 78027c533b94..514729a44688 100644
--- a/include/linux/pm_legacy.h
+++ b/include/linux/pm_legacy.h
@@ -15,11 +15,6 @@ struct pm_dev __deprecated *
 pm_register(pm_dev_t type, unsigned long id, pm_callback callback);
 
 /*
- * Unregister all devices with matching callback
- */
-void __deprecated pm_unregister_all(pm_callback callback);
-
-/*
  * Send a request to all devices
  */
 int __deprecated pm_send_all(pm_request_t rqst, void *data);
@@ -35,8 +30,6 @@ static inline struct pm_dev *pm_register(pm_dev_t type,
         return NULL;
 }
 
-static inline void pm_unregister_all(pm_callback callback) {}
-
 static inline int pm_send_all(pm_request_t rqst, void *data)
 {
         return 0;
diff --git a/include/linux/usb.h b/include/linux/usb.h
index 8dead32e7ebf..c944e8f06a4a 100644
--- a/include/linux/usb.h
+++ b/include/linux/usb.h
@@ -48,7 +48,7 @@ struct ep_device;
  * @urb_list: urbs queued to this endpoint; maintained by usbcore
  * @hcpriv: for use by HCD; typically holds hardware dma queue head (QH)
  *      with one or more transfer descriptors (TDs) per urb
- * @kobj: kobject for sysfs info
+ * @ep_dev: ep_device for sysfs info
  * @extra: descriptors following this endpoint in the configuration
  * @extralen: how many bytes of "extra" are valid
  *
diff --git a/drivers/usb/serial/usb-serial.h b/include/linux/usb/serial.h
index 0f2802a60194..91c983eef899 100644
--- a/drivers/usb/serial/usb-serial.h
+++ b/include/linux/usb/serial.h
@@ -1,12 +1,12 @@
 /*
- * USB Serial Converter driver
+ * USB Serial Converter stuff
  *
  *      Copyright (C) 1999 - 2005
  *          Greg Kroah-Hartman (greg@kroah.com)
  *
  *      This program is free software; you can redistribute it and/or modify
  *      it under the terms of the GNU General Public License as published by
- *      the Free Software Foundation; either version 2 of the License.
+ *      the Free Software Foundation; version 2 of the License.
  *
  */
 
@@ -171,7 +171,7 @@ static inline void usb_set_serial_data (struct usb_serial *serial, void *data)
  *      but before the device has been fully initialized by the usb_serial
  *      subsystem.  Use this function to download any firmware to the device,
  *      or any other early initialization that might be needed.
- *      Return 0 to continue on with the initialization sequence.  Anything 
+ *      Return 0 to continue on with the initialization sequence.  Anything
  *      else will abort it.
  * @attach: pointer to the driver's attach function.
  *      This will be called when the struct usb_serial structure is fully set
diff --git a/include/linux/usb_ch9.h b/include/linux/usb_ch9.h
index a2aacfc7af2f..c720d107ff29 100644
--- a/include/linux/usb_ch9.h
+++ b/include/linux/usb_ch9.h
@@ -51,6 +51,9 @@
 #define USB_RECIP_INTERFACE             0x01
 #define USB_RECIP_ENDPOINT              0x02
 #define USB_RECIP_OTHER                 0x03
+/* From Wireless USB 1.0 */
+#define USB_RECIP_PORT                  0x04
+#define USB_RECIP_RPIPE                 0x05
 
 /*
  * Standard requests, for the bRequest field of a SETUP packet.
@@ -73,7 +76,9 @@
 
 #define USB_REQ_SET_ENCRYPTION          0x0D    /* Wireless USB */
 #define USB_REQ_GET_ENCRYPTION          0x0E
+#define USB_REQ_RPIPE_ABORT             0x0E
 #define USB_REQ_SET_HANDSHAKE           0x0F
+#define USB_REQ_RPIPE_RESET             0x0F
 #define USB_REQ_GET_HANDSHAKE           0x10
 #define USB_REQ_SET_CONNECTION          0x11
 #define USB_REQ_SET_SECURITY_DATA       0x12
@@ -159,6 +164,8 @@ struct usb_ctrlrequest {
 #define USB_DT_BOS                      0x0f
 #define USB_DT_DEVICE_CAPABILITY        0x10
 #define USB_DT_WIRELESS_ENDPOINT_COMP   0x11
+#define USB_DT_WIRE_ADAPTER             0x21
+#define USB_DT_RPIPE                    0x22
 
 /* conventional codes for class-specific descriptors */
 #define USB_DT_CS_DEVICE                0x21
diff --git a/include/linux/usb_gadget.h b/include/linux/usb_gadget.h
index 1d78870ed8af..e17186dbcdca 100644
--- a/include/linux/usb_gadget.h
+++ b/include/linux/usb_gadget.h
@@ -872,9 +872,9 @@ int usb_gadget_config_buf(const struct usb_config_descriptor *config,
 /* utility wrapping a simple endpoint selection policy */
 
 extern struct usb_ep *usb_ep_autoconfig (struct usb_gadget *,
-                        struct usb_endpoint_descriptor *) __init;
+                        struct usb_endpoint_descriptor *) __devinit;
 
-extern void usb_ep_autoconfig_reset (struct usb_gadget *) __init;
+extern void usb_ep_autoconfig_reset (struct usb_gadget *) __devinit;
 
 #endif  /* __KERNEL__ */
 
diff --git a/include/linux/usb_usual.h b/include/linux/usb_usual.h
index 608487a62c98..f38f43f20fae 100644
--- a/include/linux/usb_usual.h
+++ b/include/linux/usb_usual.h
@@ -43,6 +43,8 @@
                 /* Need delay after Command phase */            \
         US_FLAG(NO_WP_DETECT,   0x00000200)                     \
                 /* Don't check for write-protect */             \
+        US_FLAG(MAX_SECTORS_64, 0x00000400)                     \
+                /* Sets max_sectors to 64    */
 
 #define US_FLAG(name, value)    US_FL_##name = value ,
 enum { US_DO_ALL_FLAGS };
diff --git a/kernel/power/pm.c b/kernel/power/pm.c
index 84063ac8fcfc..c50d15266c10 100644
--- a/kernel/power/pm.c
+++ b/kernel/power/pm.c
@@ -75,42 +75,6 @@ struct pm_dev *pm_register(pm_dev_t type,
         return dev;
 }
 
-static void __pm_unregister(struct pm_dev *dev)
-{
-        if (dev) {
-                list_del(&dev->entry);
-                kfree(dev);
-        }
-}
-
-/**
- *      pm_unregister_all - unregister all devices with matching callback
- *      @callback: callback function pointer
- *
- *      Unregister every device that would call the callback passed. This
- *      is primarily meant as a helper function for loadable modules. It
- *      enables a module to give up all its managed devices without keeping
- *      its own private list.
- */
- 
-void pm_unregister_all(pm_callback callback)
-{
-        struct list_head *entry;
-
-        if (!callback)
-                return;
-
-        mutex_lock(&pm_devs_lock);
-        entry = pm_devs.next;
-        while (entry != &pm_devs) {
-                struct pm_dev *dev = list_entry(entry, struct pm_dev, entry);
-                entry = entry->next;
-                if (dev->callback == callback)
-                        __pm_unregister(dev);
-        }
-        mutex_unlock(&pm_devs_lock);
-}
-
 /**
  *      pm_send - send request to a single device
  *      @dev: device to send to
@@ -239,7 +203,6 @@ int pm_send_all(pm_request_t rqst, void *data)
 }
 
 EXPORT_SYMBOL(pm_register);
-EXPORT_SYMBOL(pm_unregister_all);
 EXPORT_SYMBOL(pm_send_all);
 EXPORT_SYMBOL(pm_active);
 
diff --git a/kernel/resource.c b/kernel/resource.c
index 129cf046e561..0dd3a857579e 100644
--- a/kernel/resource.c
+++ b/kernel/resource.c
@@ -404,8 +404,6 @@ int insert_resource(struct resource *parent, struct resource *new)
         return result;
 }
 
-EXPORT_SYMBOL(insert_resource);
-
 /*
  * Given an existing resource, change its start and size to match the
  * arguments.  Returns -EBUSY if it can't fit.  Existing children of