aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--include/asm-sparc64/hypervisor.h2072
1 files changed, 2072 insertions, 0 deletions
diff --git a/include/asm-sparc64/hypervisor.h b/include/asm-sparc64/hypervisor.h
new file mode 100644
index 000000000000..9c8e453abe97
--- /dev/null
+++ b/include/asm-sparc64/hypervisor.h
@@ -0,0 +1,2072 @@
1#ifndef _SPARC64_HYPERVISOR_H
2#define _SPARC64_HYPERVISOR_H
3
4/* Sun4v hypervisor interfaces and defines.
5 *
6 * Hypervisor calls are made via traps to software traps number 0x80
7 * and above. Registers %o0 to %o5 serve as argument, status, and
8 * return value registers.
9 *
10 * There are two kinds of these traps. First there are the normal
11 * "fast traps" which use software trap 0x80 and encode the function
12 * to invoke by number in register %o5. Argument and return value
13 * handling is as follows:
14 *
15 * -----------------------------------------------
16 * | %o5 | function number | undefined |
17 * | %o0 | argument 0 | return status |
18 * | %o1 | argument 1 | return value 1 |
19 * | %o2 | argument 2 | return value 2 |
20 * | %o3 | argument 3 | return value 3 |
21 * | %o4 | argument 4 | return value 4 |
22 * -----------------------------------------------
23 *
24 * The second type are "hyper-fast traps" which encode the function
25 * number in the software trap number itself. So these use trap
26 * numbers > 0x80. The register usage for hyper-fast traps is as
27 * follows:
28 *
29 * -----------------------------------------------
30 * | %o0 | argument 0 | return status |
31 * | %o1 | argument 1 | return value 1 |
32 * | %o2 | argument 2 | return value 2 |
33 * | %o3 | argument 3 | return value 3 |
34 * | %o4 | argument 4 | return value 4 |
35 * -----------------------------------------------
36 *
37 * Registers providing explicit arguments to the hypervisor calls
38 * are volatile across the call. Upon return their values are
39 * undefined unless explicitly specified as containing a particular
40 * return value by the specific call. The return status is always
41 * returned in register %o0, zero indicates a successful execution of
42 * the hypervisor call and other values indicate an error status as
43 * defined below. So, for example, if a hyper-fast trap takes
44 * arguments 0, 1, and 2, then %o0, %o1, and %o2 are volatile across
45 * the call and %o3, %o4, and %o5 would be preserved.
46 *
47 * If the hypervisor trap is invalid, or the fast trap function number
48 * is invalid, HV_EBADTRAP will be returned in %o0. Also, all 64-bits
49 * of the argument and return values are significant.
50 */
51
52/* Trap numbers. */
53#define HV_FAST_TRAP 0x80
54#define HV_MMU_MAP_ADDR_TRAP 0x83
55#define HV_MMU_UNMAP_ADDR_TRAP 0x84
56#define HV_TTRACE_ADDENTRY_TRAP 0x85
57#define HV_CORE_TRAP 0xff
58
59/* Error codes. */
60#define HV_EOK 0 /* Successful return */
61#define HV_ENOCPU 1 /* Invalid CPU id */
62#define HV_ENORADDR 2 /* Invalid real address */
63#define HV_ENOINTR 3 /* Invalid interrupt id */
64#define HV_EBADPGSZ 4 /* Invalid pagesize encoding */
65#define HV_EBADTSB 5 /* Invalid TSB description */
66#define HV_EINVAL 6 /* Invalid argument */
67#define HV_EBADTRAP 7 /* Invalid function number */
68#define HV_EBADALIGN 8 /* Invalid address alignment */
69#define HV_EWOULDBLOCK 9 /* Cannot complete w/o blocking */
70#define HV_ENOACCESS 10 /* No access to resource */
71#define HV_EIO 11 /* I/O error */
72#define HV_ECPUERROR 12 /* CPU in error state */
73#define HV_ENOTSUPPORTED 13 /* Function not supported */
74#define HV_ENOMAP 14 /* No mapping found */
75#define HV_ETOOMANY 15 /* Too many items specified */
76
77/* mach_exit()
78 * TRAP: HV_FAST_TRAP
79 * FUNCTION: HV_FAST_MACH_EXIT
80 * ARG0: exit code
81 * ERRORS: This service does not return.
82 *
83 * Stop all CPUs in the virtual domain and place them into the stopped
84 * state. The 64-bit exit code may be passed to a service entity as
85 * the domain's exit status. On systems without a service entity, the
86 * domain will undergo a reset, and the boot firmware will be
87 * reloaded.
88 *
89 * This function will never return to the guest that invokes it.
90 *
91 * Note: By convention an exit code of zero denotes a successful exit by
92 * the guest code. A non-zero exit code denotes a guest specific
93 * error indication.
94 *
95 */
96#define HV_FAST_MACH_EXIT 0x00
97
98/* Domain services. */
99
100/* mach_desc()
101 * TRAP: HV_FAST_TRAP
102 * FUNCTION: HV_FAST_MACH_DESC
103 * ARG0: buffer
104 * ARG1: length
105 * RET0: status
106 * RET1: length
107 * ERRORS: HV_EBADALIGN Buffer is badly aligned
108 * HV_ENORADDR Buffer is to an illegal real address.
109 * HV_EINVAL Buffer length is too small for complete
110 * machine description.
111 *
112 * Copy the most current machine description into the buffer indicated
113 * by the real address in ARG0. The buffer provided must be 16 byte
114 * aligned. Upon success or HV_EINVAL, this service returns the
115 * actual size of the machine description in the RET1 return value.
116 *
117 * Note: A method of determining the appropriate buffer size for the
118 * machine description is to first call this service with a buffer
119 * length of 0 bytes.
120 */
121#define HV_FAST_MACH_DESC 0x01
122
123/* mach_exit()
124 * TRAP: HV_FAST_TRAP
125 * FUNCTION: HV_FAST_MACH_SIR
126 * ERRORS: This service does not return.
127 *
128 * Perform a software initiated reset of the virtual machine domain.
129 * All CPUs are captured as soon as possible, all hardware devices are
130 * returned to the entry default state, and the domain is restarted at
131 * the SIR (trap type 0x04) real trap table (RTBA) entry point on one
132 * of the CPUs. The single CPU restarted is selected as determined by
133 * platform specific policy. Memory is preserved across this
134 * operation.
135 */
136#define HV_FAST_MACH_SIR 0x02
137
138/* mach_set_soft_state()
139 * TRAP: HV_FAST_TRAP
140 * FUNCTION: HV_FAST_MACH_SET_SOFT_STATE
141 * ARG0: software state
142 * ARG1: software state description pointer
143 * RET0: status
144 * ERRORS: EINVAL software state not valid or software state
145 * description is not NULL terminated
146 * ENORADDR software state description pointer is not a
147 * valid real address
148 * EBADALIGNED software state description is not correctly
149 * aligned
150 *
151 * This allows the guest to report it's soft state to the hypervisor. There
152 * are two primary components to this state. The first part states whether
153 * the guest software is running or not. The second containts optional
154 * details specific to the software.
155 *
156 * The software state argument is defined below in HV_SOFT_STATE_*, and
157 * indicates whether the guest is operating normally or in a transitional
158 * state.
159 *
160 * The software state description argument is a real address of a data buffer
161 * of size 32-bytes aligned on a 32-byte boundary. It is treated as a NULL
162 * terminated 7-bit ASCII string of up to 31 characters not including the
163 * NULL termination.
164 */
165#define HV_FAST_MACH_SET_SOFT_STATE 0x03
166#define HV_SOFT_STATE_NORMAL 0x01
167#define HV_SOFT_STATE_TRANSITION 0x02
168
169/* mach_get_soft_state()
170 * TRAP: HV_FAST_TRAP
171 * FUNCTION: HV_FAST_MACH_GET_SOFT_STATE
172 * ARG0: software state description pointer
173 * RET0: status
174 * RET1: software state
175 * ERRORS: ENORADDR software state description pointer is not a
176 * valid real address
177 * EBADALIGNED software state description is not correctly
178 * aligned
179 *
180 * Retrieve the current value of the guest's software state. The rules
181 * for the software state pointer are the same as for mach_set_soft_state()
182 * above.
183 */
184#define HV_FAST_MACH_GET_SOFT_STATE 0x04
185
186/* CPU services.
187 *
188 * CPUs represent devices that can execute software threads. A single
189 * chip that contains multiple cores or strands is represented as
190 * multiple CPUs with unique CPU identifiers. CPUs are exported to
191 * OBP via the machine description (and to the OS via the OBP device
192 * tree). CPUs are always in one of three states: stopped, running,
193 * or error.
194 *
195 * A CPU ID is a pre-assigned 16-bit value that uniquely identifies a
196 * CPU within a logical domain. Operations that are to be performed
197 * on multiple CPUs specify them via a CPU list. A CPU list is an
198 * array in real memory, of which each 16-bit word is a CPU ID. CPU
199 * lists are passed through the API as two arguments. The first is
200 * the number of entries (16-bit words) in the CPU list, and the
201 * second is the (real address) pointer to the CPU ID list.
202 */
203
204/* cpu_start()
205 * TRAP: HV_FAST_TRAP
206 * FUNCTION: HV_FAST_CPU_START
207 * ARG0: CPU ID
208 * ARG1: PC
209 * ARG1: RTBA
210 * ARG1: target ARG0
211 * RET0: status
212 * ERRORS: ENOCPU Invalid CPU ID
213 * EINVAL Target CPU ID is not in the stopped state
214 * ENORADDR Invalid PC or RTBA real address
215 * EBADALIGN Unaligned PC or unaligned RTBA
216 * EWOULDBLOCK Starting resources are not available
217 *
218 * Start CPU with given CPU ID with PC in %pc and with a real trap
219 * base address value of RTBA. The indicated CPU must be in the
220 * stopped state. The supplied RTBA must be aligned on a 256 byte
221 * boundary. On successful completion, the specified CPU will be in
222 * the running state and will be supplied with "target ARG0" in %o0
223 * and RTBA in %tba.
224 */
225#define HV_FAST_CPU_START 0x10
226
227/* cpu_stop()
228 * TRAP: HV_FAST_TRAP
229 * FUNCTION: HV_FAST_CPU_STOP
230 * ARG0: CPU ID
231 * RET0: status
232 * ERRORS: ENOCPU Invalid CPU ID
233 * EINVAL Target CPU ID is the current cpu
234 * EINVAL Target CPU ID is not in the running state
235 * EWOULDBLOCK Stopping resources are not available
236 * ENOTSUPPORTED Not supported on this platform
237 *
238 * The specified CPU is stopped. The indicated CPU must be in the
239 * running state. On completion, it will be in the stopped state. It
240 * is not legal to stop the current CPU.
241 *
242 * Note: As this service cannot be used to stop the current cpu, this service
243 * may not be used to stop the last running CPU in a domain. To stop
244 * and exit a running domain, a guest must use the mach_exit() service.
245 */
246#define HV_FAST_CPU_STOP 0x11
247
248/* cpu_yield()
249 * TRAP: HV_FAST_TRAP
250 * FUNCTION: HV_FAST_CPU_YIELD
251 * RET0: status
252 * ERRORS: No possible error.
253 *
254 * Suspend execution on the current CPU. Execution will resume when
255 * an interrupt (device, %stick_compare, or cross-call) is targeted to
256 * the CPU. On some CPUs, this API may be used by the hypervisor to
257 * save power by disabling hardware strands.
258 */
259#define HV_FAST_CPU_YIELD 0x12
260
261
262/* cpu_qconf()
263 * TRAP: HV_FAST_TRAP
264 * FUNCTION: HV_FAST_CPU_QCONF
265 * ARG0: queue
266 * ARG1: base real address
267 * ARG2: number of entries
268 * RET0: status
269 * ERRORS: ENORADDR Invalid base real address
270 * EINVAL Invalid queue or number of entries is less
271 * than 2 or too large.
272 * EBADALIGN Base real address is not correctly aligned
273 * for size.
274 *
275 * Configure the given queue to be placed at the givem base real
276 * address, with the given number of entries. The number of entries
277 * must be a power of 2. The base real address must be aligned
278 * exactly to match the queue size. Each queue entry is 64 bytes
279 * long, so for example a 32 entry queue must be aligned on a 2048
280 * byte real address boundary.
281 *
282 * The specified queue is unconfigured is number of entries is given as zero.
283 *
284 * For the current version of this API service, the argument queue is defined
285 * as follows:
286 * queue description
287 * ----- -------------------------
288 * 0x3c cpu mondo queue
289 * 0x3d device mondo queue
290 * 0x3e resumable error queue
291 * 0x3f non-resumable error queue
292 *
293 * Note: The maximum number of entries for each queue for a specific cpu may
294 * be determined from the machine description.
295 */
296#define HV_FAST_CPU_QCONF 0x14
297#define HV_CPU_QUEUE_CPU_MONDO 0x3c
298#define HV_CPU_QUEUE_DEVICE_MONDO 0x3d
299#define HV_CPU_QUEUE_RES_ERROR 0x3e
300#define HV_CPU_QUEUE_NONRES_ERROR 0x3f
301
302/* cpu_qinfo()
303 * TRAP: HV_FAST_TRAP
304 * FUNCTION: HV_FAST_CPU_QINFO
305 * ARG0: queue
306 * RET0: status
307 * RET1: base real address
308 * RET1: number of entries
309 * ERRORS: EINVAL Invalid queue
310 *
311 * Return the configuration info for the given queue. The base real
312 * address and number of entries of the defined queue are returned.
313 * The queue argument values are the same as for cpu_qconf() above.
314 *
315 * If the specified queue is a valid queue number, but no queue has
316 * been defined, the number of entries will be set to zero and the
317 * base real address returned is undefined.
318 */
319#define HV_FAST_CPU_QINFO 0x15
320
321/* cpu_mondo_send()
322 * TRAP: HV_FAST_TRAP
323 * FUNCTION: HV_FAST_CPU_MONDO_SEND
324 * ARG0-1: CPU list
325 * ARG2: data real address
326 * RET0: status
327 * ERRORS: EBADALIGN Mondo data is not 64-byte aligned or CPU list
328 * is not 2-byte aligned.
329 * ENORADDR Invalid data mondo address, or invalid cpu list
330 * address.
331 * ENOCPU Invalid cpu in CPU list
332 * EWOULDBLOCK Some or all of the listed CPUs did not receive
333 * the mondo
334 * EINVAL CPU list includes caller's CPU ID
335 *
336 * Send a mondo interrupt to the CPUs in the given CPU list with the
337 * 64-bytes at the given data real address. The data must be 64-byte
338 * aligned. The mondo data will be delivered to the cpu_mondo queues
339 * of the recipient CPUs.
340 *
341 * In all cases, error or not, the CPUs in the CPU list to which the
342 * mondo has been successfully delivered will be indicated by having
343 * their entry in CPU list updated with the value 0xffff.
344 */
345#define HV_FAST_CPU_MONDO_SEND 0x42
346
347/* cpu_myid()
348 * TRAP: HV_FAST_TRAP
349 * FUNCTION: HV_FAST_CPU_MYID
350 * RET0: status
351 * RET1: CPU ID
352 * ERRORS: No errors defined.
353 *
354 * Return the hypervisor ID handle for the current CPU. Use by a
355 * virtual CPU to discover it's own identity.
356 */
357#define HV_FAST_CPU_MYID 0x16
358
359/* cpu_state()
360 * TRAP: HV_FAST_TRAP
361 * FUNCTION: HV_FAST_CPU_STATE
362 * ARG0: CPU ID
363 * RET0: status
364 * RET1: state
365 * ERRORS: ENOCPU Invalid CPU ID
366 *
367 * Retrieve the current state of the CPU with the given CPU ID.
368 */
369#define HV_FAST_CPU_STATE 0x17
370#define HV_CPU_STATE_STOPPED 0x01
371#define HV_CPU_STATE_RUNNING 0x02
372#define HV_CPU_STATE_ERROR 0x03
373
374/* cpu_set_rtba()
375 * TRAP: HV_FAST_TRAP
376 * FUNCTION: HV_FAST_CPU_SET_RTBA
377 * ARG0: RTBA
378 * RET0: status
379 * RET1: previous RTBA
380 * ERRORS: ENORADDR Invalid RTBA real address
381 * EBADALIGN RTBA is incorrectly aligned for a trap table
382 *
383 * Set the real trap base address of the local cpu to the given RTBA.
384 * The supplied RTBA must be aligned on a 256 byte boundary. Upon
385 * success the previous value of the RTBA is returned in RET1.
386 *
387 * Note: This service does not affect %tba
388 */
389#define HV_FAST_CPU_SET_RTBA 0x18
390
391/* cpu_set_rtba()
392 * TRAP: HV_FAST_TRAP
393 * FUNCTION: HV_FAST_CPU_GET_RTBA
394 * RET0: status
395 * RET1: previous RTBA
396 * ERRORS: No possible error.
397 *
398 * Returns the current value of RTBA in RET1.
399 */
400#define HV_FAST_CPU_GET_RTBA 0x19
401
402/* MMU services.
403 *
404 * Layout of a TSB description for mmu_tsb_ctx{,non}0() calls.
405 */
406#ifndef __ASSEMBLY__
407struct hv_tsb_descr {
408 unsigned short pgsz_idx;
409 unsigned short assoc;
410 unsigned int num_ttes; /* in TTEs */
411 unsigned int ctx_idx;
412 unsigned int pgsz_mask;
413 unsigned long tsb_base;
414 unsigned long resv;
415};
416#endif
417#define HV_TSB_DESCR_PGSZ_IDX_OFFSET 0x00
418#define HV_TSB_DESCR_ASSOC_OFFSET 0x02
419#define HV_TSB_DESCR_NUM_TTES_OFFSET 0x04
420#define HV_TSB_DESCR_CTX_IDX_OFFSET 0x08
421#define HV_TSB_DESCR_PGSZ_MASK_OFFSET 0x0c
422#define HV_TSB_DESCR_TSB_BASE_OFFSET 0x10
423#define HV_TSB_DESCR_RESV_OFFSET 0x18
424
425/* Page size bitmask. */
426#define HV_PGSZ_MASK_8K (1 << 0)
427#define HV_PGSZ_MASK_64K (1 << 1)
428#define HV_PGSZ_MASK_512K (1 << 2)
429#define HV_PGSZ_MASK_4MB (1 << 3)
430#define HV_PGSZ_MASK_32MB (1 << 4)
431#define HV_PGSZ_MASK_256MB (1 << 5)
432#define HV_PGSZ_MASK_2GB (1 << 6)
433#define HV_PGSZ_MASK_16GB (1 << 7)
434
435/* Page size index. The value given in the TSB descriptor must correspond
436 * to the smallest page size specified in the pgsz_mask page size bitmask.
437 */
438#define HV_PGSZ_IDX_8K 0
439#define HV_PGSZ_IDX_64K 1
440#define HV_PGSZ_IDX_512K 2
441#define HV_PGSZ_IDX_4MB 3
442#define HV_PGSZ_IDX_32MB 4
443#define HV_PGSZ_IDX_256MB 5
444#define HV_PGSZ_IDX_2GB 6
445#define HV_PGSZ_IDX_16GB 7
446
447/* MMU fault status area.
448 *
449 * MMU related faults have their status and fault address information
450 * placed into a memory region made available by privileged code. Each
451 * virtual processor must make a mmu_fault_area_conf() call to tell the
452 * hypervisor where that processor's fault status should be stored.
453 *
454 * The fault status block is a multiple of 64-bytes and must be aligned
455 * on a 64-byte boundary.
456 */
457#ifndef __ASSEMBLY__
458struct hv_fault_status {
459 unsigned long i_fault_type;
460 unsigned long i_fault_addr;
461 unsigned long i_fault_ctx;
462 unsigned long i_reserved[5];
463 unsigned long d_fault_type;
464 unsigned long d_fault_addr;
465 unsigned long d_fault_ctx;
466 unsigned long d_reserved[5];
467};
468#endif
469#define HV_FAULT_I_TYPE_OFFSET 0x00
470#define HV_FAULT_I_ADDR_OFFSET 0x08
471#define HV_FAULT_I_CTX_OFFSET 0x10
472#define HV_FAULT_D_TYPE_OFFSET 0x40
473#define HV_FAULT_D_ADDR_OFFSET 0x48
474#define HV_FAULT_D_CTX_OFFSET 0x50
475
476#define HV_FAULT_TYPE_FAST_MISS 1
477#define HV_FAULT_TYPE_FAST_PROT 2
478#define HV_FAULT_TYPE_MMU_MISS 3
479#define HV_FAULT_TYPE_INV_RA 4
480#define HV_FAULT_TYPE_PRIV_VIOL 5
481#define HV_FAULT_TYPE_PROT_VIOL 6
482#define HV_FAULT_TYPE_NFO 7
483#define HV_FAULT_TYPE_NFO_SEFF 8
484#define HV_FAULT_TYPE_INV_VA 9
485#define HV_FAULT_TYPE_INV_ASI 10
486#define HV_FAULT_TYPE_NC_ATOMIC 11
487#define HV_FAULT_TYPE_PRIV_ACT 12
488#define HV_FAULT_TYPE_RESV1 13
489#define HV_FAULT_TYPE_UNALIGNED 14
490#define HV_FAULT_TYPE_INV_PGSZ 15
491/* Values 16 --> -2 are reserved. */
492#define HV_FAULT_TYPE_MULTIPLE -1
493
494/* Flags argument for mmu_{map,unmap}_addr(), mmu_demap_{page,context,all}(),
495 * and mmu_{map,unmap}_perm_addr().
496 */
497#define HV_MMU_DMMU 0x01
498#define HV_MMU_IMMU 0x02
499#define HV_MMU_ALL (HV_MMU_DMMU | HV_MMU_IMMU)
500
501/* mmu_map_addr()
502 * TRAP: HV_MMU_MAP_ADDR_TRAP
503 * ARG0: virtual address
504 * ARG1: mmu context
505 * ARG2: TTE
506 * ARG3: flags (HV_MMU_{IMMU,DMMU})
507 * ERRORS: EINVAL Invalid virtual address, mmu context, or flags
508 * EBADPGSZ Invalid page size value
509 * ENORADDR Invalid real address in TTE
510 *
511 * Create a non-permanent mapping using the given TTE, virtual
512 * address, and mmu context. The flags argument determines which
513 * (data, or instruction, or both) TLB the mapping gets loaded into.
514 *
515 * The behavior is undefined if the valid bit is clear in the TTE.
516 *
517 * Note: This API call is for privileged code to specify temporary translation
518 * mappings without the need to create and manage a TSB.
519 */
520
521/* mmu_unmap_addr()
522 * TRAP: HV_MMU_UNMAP_ADDR_TRAP
523 * ARG0: virtual address
524 * ARG1: mmu context
525 * ARG2: flags (HV_MMU_{IMMU,DMMU})
526 * ERRORS: EINVAL Invalid virtual address, mmu context, or flags
527 *
528 * Demaps the given virtual address in the given mmu context on this
529 * CPU. This function is intended to be used to demap pages mapped
530 * with mmu_map_addr. This service is equivalent to invoking
531 * mmu_demap_page() with only the current CPU in the CPU list. The
532 * flags argument determines which (data, or instruction, or both) TLB
533 * the mapping gets unmapped from.
534 *
535 * Attempting to perform an unmap operation for a previously defined
536 * permanent mapping will have undefined results.
537 */
538
539/* mmu_tsb_ctx0()
540 * TRAP: HV_FAST_TRAP
541 * FUNCTION: HV_FAST_MMU_TSB_CTX0
542 * ARG0: number of TSB descriptions
543 * ARG1: TSB descriptions pointer
544 * RET0: status
545 * ERRORS: ENORADDR Invalid TSB descriptions pointer or
546 * TSB base within a descriptor
547 * EBADALIGN TSB descriptions pointer is not aligned
548 * to an 8-byte boundary, or TSB base
549 * within a descriptor is not aligned for
550 * the given TSB size
551 * EBADPGSZ Invalid page size in a TSB descriptor
552 * EBADTSB Invalid associativity or size in a TSB
553 * descriptor
554 * EINVAL Invalid number of TSB descriptions, or
555 * invalid context index in a TSB
556 * descriptor, or index page size not
557 * equal to smallest page size in page
558 * size bitmask field.
559 *
560 * Configures the TSBs for the current CPU for virtual addresses with
561 * context zero. The TSB descriptions pointer is a pointer to an
562 * array of the given number of TSB descriptions.
563 *
564 * Note: The maximum number of TSBs available to a virtual CPU is given by the
565 * mmu-max-#tsbs property of the cpu's corresponding "cpu" node in the
566 * machine description.
567 */
568#define HV_FAST_MMU_TSB_CTX0 0x20
569
570/* mmu_tsb_ctxnon0()
571 * TRAP: HV_FAST_TRAP
572 * FUNCTION: HV_FAST_MMU_TSB_CTXNON0
573 * ARG0: number of TSB descriptions
574 * ARG1: TSB descriptions pointer
575 * RET0: status
576 * ERRORS: Same as for mmu_tsb_ctx0() above.
577 *
578 * Configures the TSBs for the current CPU for virtual addresses with
579 * non-zero contexts. The TSB descriptions pointer is a pointer to an
580 * array of the given number of TSB descriptions.
581 *
582 * Note: A maximum of 16 TSBs may be specified in the TSB description list.
583 */
584#define HV_FAST_MMU_TSB_CTXNON0 0x21
585
586/* mmu_demap_page()
587 * TRAP: HV_FAST_TRAP
588 * FUNCTION: HV_FAST_MMU_DEMAP_PAGE
589 * ARG0: reserved, must be zero
590 * ARG1: reserved, must be zero
591 * ARG2: virtual address
592 * ARG3: mmu context
593 * ARG4: flags (HV_MMU_{IMMU,DMMU})
594 * RET0: status
595 * ERRORS: EINVAL Invalid virutal address, context, or
596 * flags value
597 * ENOTSUPPORTED ARG0 or ARG1 is non-zero
598 *
599 * Demaps any page mapping of the given virtual address in the given
600 * mmu context for the current virtual CPU. Any virtually tagged
601 * caches are guaranteed to be kept consistent. The flags argument
602 * determines which TLB (instruction, or data, or both) participate in
603 * the operation.
604 *
605 * ARG0 and ARG1 are both reserved and must be set to zero.
606 */
607#define HV_FAST_MMU_DEMAP_PAGE 0x22
608
609/* mmu_demap_ctx()
610 * TRAP: HV_FAST_TRAP
611 * FUNCTION: HV_FAST_MMU_DEMAP_CTX
612 * ARG0: reserved, must be zero
613 * ARG1: reserved, must be zero
614 * ARG2: mmu context
615 * ARG3: flags (HV_MMU_{IMMU,DMMU})
616 * RET0: status
617 * ERRORS: EINVAL Invalid context or flags value
618 * ENOTSUPPORTED ARG0 or ARG1 is non-zero
619 *
620 * Demaps all non-permanent virtual page mappings previously specified
621 * for the given context for the current virtual CPU. Any virtual
622 * tagged caches are guaranteed to be kept consistent. The flags
623 * argument determines which TLB (instruction, or data, or both)
624 * participate in the operation.
625 *
626 * ARG0 and ARG1 are both reserved and must be set to zero.
627 */
628#define HV_FAST_MMU_DEMAP_CTX 0x23
629
630/* mmu_demap_all()
631 * TRAP: HV_FAST_TRAP
632 * FUNCTION: HV_FAST_MMU_DEMAP_ALL
633 * ARG0: reserved, must be zero
634 * ARG1: reserved, must be zero
635 * ARG2: flags (HV_MMU_{IMMU,DMMU})
636 * RET0: status
637 * ERRORS: EINVAL Invalid flags value
638 * ENOTSUPPORTED ARG0 or ARG1 is non-zero
639 *
640 * Demaps all non-permanent virtual page mappings previously specified
641 * for the current virtual CPU. Any virtual tagged caches are
642 * guaranteed to be kept consistent. The flags argument determines
643 * which TLB (instruction, or data, or both) participate in the
644 * operation.
645 *
646 * ARG0 and ARG1 are both reserved and must be set to zero.
647 */
648#define HV_FAST_MMU_DEMAP_ALL 0x24
649
650/* mmu_map_perm_addr()
651 * TRAP: HV_FAST_TRAP
652 * FUNCTION: HV_FAST_MMU_MAP_PERM_ADDR
653 * ARG0: virtual address
654 * ARG1: reserved, must be zero
655 * ARG2: TTE
656 * ARG3: flags (HV_MMU_{IMMU,DMMU})
657 * RET0: status
658 * ERRORS: EINVAL Invalid virutal address or flags value
659 * EBADPGSZ Invalid page size value
660 * ENORADDR Invalid real address in TTE
661 * ETOOMANY Too many mappings (max of 8 reached)
662 *
663 * Create a permanent mapping using the given TTE and virtual address
664 * for context 0 on the calling virtual CPU. A maximum of 8 such
665 * permanent mappings may be specified by privileged code. Mappings
666 * may be removed with mmu_unmap_perm_addr().
667 *
668 * The behavior is undefined if a TTE with the valid bit clear is given.
669 *
670 * Note: This call is used to specify address space mappings for which
671 * privileged code does not expect to receive misses. For example,
672 * this mechanism can be used to map kernel nucleus code and data.
673 */
674#define HV_FAST_MMU_MAP_PERM_ADDR 0x25
675
676/* mmu_fault_area_conf()
677 * TRAP: HV_FAST_TRAP
678 * FUNCTION: HV_FAST_MMU_FAULT_AREA_CONF
679 * ARG0: real address
680 * RET0: status
681 * RET1: previous mmu fault area real address
682 * ERRORS: ENORADDR Invalid real address
683 * EBADALIGN Invalid alignment for fault area
684 *
685 * Configure the MMU fault status area for the calling CPU. A 64-byte
686 * aligned real address specifies where MMU fault status information
687 * is placed. The return value is the previously specified area, or 0
688 * for the first invocation. Specifying a fault area at real address
689 * 0 is not allowed.
690 */
691#define HV_FAST_MMU_FAULT_AREA_CONF 0x26
692
693/* mmu_enable()
694 * TRAP: HV_FAST_TRAP
695 * FUNCTION: HV_FAST_MMU_ENABLE
696 * ARG0: enable flag
697 * ARG1: return target address
698 * RET0: status
699 * ERRORS: ENORADDR Invalid real address when disabling
700 * translation.
701 * EBADALIGN The return target address is not
702 * aligned to an instruction.
703 * EINVAL The enable flag request the current
704 * operating mode (e.g. disable if already
705 * disabled)
706 *
707 * Enable or disable virtual address translation for the calling CPU
708 * within the virtual machine domain. If the enable flag is zero,
709 * translation is disabled, any non-zero value will enable
710 * translation.
711 *
712 * When this function returns, the newly selected translation mode
713 * will be active. If the mmu is being enabled, then the return
714 * target address is a virtual address else it is a real address.
715 *
716 * Upon successful completion, control will be returned to the given
717 * return target address (ie. the cpu will jump to that address). On
718 * failure, the previous mmu mode remains and the trap simply returns
719 * as normal with the appropriate error code in RET0.
720 */
721#define HV_FAST_MMU_ENABLE 0x27
722
723/* mmu_unmap_perm_addr()
724 * TRAP: HV_FAST_TRAP
725 * FUNCTION: HV_FAST_MMU_UNMAP_PERM_ADDR
726 * ARG0: virtual address
727 * ARG1: reserved, must be zero
728 * ARG2: flags (HV_MMU_{IMMU,DMMU})
729 * RET0: status
730 * ERRORS: EINVAL Invalid virutal address or flags value
731 * ENOMAP Specified mapping was not found
732 *
733 * Demaps any permanent page mapping (established via
734 * mmu_map_perm_addr()) at the given virtual address for context 0 on
735 * the current virtual CPU. Any virtual tagged caches are guaranteed
736 * to be kept consistent.
737 */
738#define HV_FAST_MMU_UNMAP_PERM_ADDR 0x28
739
740/* mmu_tsb_ctx0_info()
741 * TRAP: HV_FAST_TRAP
742 * FUNCTION: HV_FAST_MMU_TSB_CTX0_INFO
743 * ARG0: max TSBs
744 * ARG1: buffer pointer
745 * RET0: status
746 * RET1: number of TSBs
747 * ERRORS: EINVAL Supplied buffer is too small
748 * EBADALIGN The buffer pointer is badly aligned
749 * ENORADDR Invalid real address for buffer pointer
750 *
751 * Return the TSB configuration as previous defined by mmu_tsb_ctx0()
752 * into the provided buffer. The size of the buffer is given in ARG1
753 * in terms of the number of TSB description entries.
754 *
755 * Upon return, RET1 always contains the number of TSB descriptions
756 * previously configured. If zero TSBs were configured, EOK is
757 * returned with RET1 containing 0.
758 */
759#define HV_FAST_MMU_TSB_CTX0_INFO 0x29
760
761/* mmu_tsb_ctxnon0_info()
762 * TRAP: HV_FAST_TRAP
763 * FUNCTION: HV_FAST_MMU_TSB_CTXNON0_INFO
764 * ARG0: max TSBs
765 * ARG1: buffer pointer
766 * RET0: status
767 * RET1: number of TSBs
768 * ERRORS: EINVAL Supplied buffer is too small
769 * EBADALIGN The buffer pointer is badly aligned
770 * ENORADDR Invalid real address for buffer pointer
771 *
772 * Return the TSB configuration as previous defined by
773 * mmu_tsb_ctxnon0() into the provided buffer. The size of the buffer
774 * is given in ARG1 in terms of the number of TSB description entries.
775 *
776 * Upon return, RET1 always contains the number of TSB descriptions
777 * previously configured. If zero TSBs were configured, EOK is
778 * returned with RET1 containing 0.
779 */
780#define HV_FAST_MMU_TSB_CTXNON0_INFO 0x2a
781
782/* mmu_fault_area_info()
783 * TRAP: HV_FAST_TRAP
784 * FUNCTION: HV_FAST_MMU_FAULT_AREA_INFO
785 * RET0: status
786 * RET1: fault area real address
787 * ERRORS: No errors defined.
788 *
789 * Return the currently defined MMU fault status area for the current
790 * CPU. The real address of the fault status area is returned in
791 * RET1, or 0 is returned in RET1 if no fault status area is defined.
792 *
793 * Note: mmu_fault_area_conf() may be called with the return value (RET1)
794 * from this service if there is a need to save and restore the fault
795 * area for a cpu.
796 */
797#define HV_FAST_MMU_FAULT_AREA_INFO 0x2b
798
799/* Cache and Memory services. */
800
801/* mem_scrub()
802 * TRAP: HV_FAST_TRAP
803 * FUNCTION: HV_FAST_MEM_SCRUB
804 * ARG0: real address
805 * ARG1: length
806 * RET0: status
807 * RET1: length scrubbed
808 * ERRORS: ENORADDR Invalid real address
809 * EBADALIGN Start address or length are not correctly
810 * aligned
811 * EINVAL Length is zero
812 *
813 * Zero the memory contents in the range real address to real address
814 * plus length minus 1. Also, valid ECC will be generated for that
815 * memory address range. Scrubbing is started at the given real
816 * address, but may not scrub the entire given length. The actual
817 * length scrubbed will be returned in RET1.
818 *
819 * The real address and length must be aligned on an 8K boundary, or
820 * contain the start address and length from a sun4v error report.
821 *
822 * Note: There are two uses for this function. The first use is to block clear
823 * and initialize memory and the second is to scrub an u ncorrectable
824 * error reported via a resumable or non-resumable trap. The second
825 * use requires the arguments to be equal to the real address and length
826 * provided in a sun4v memory error report.
827 */
828#define HV_FAST_MEM_SCRUB 0x31
829
830/* mem_sync()
831 * TRAP: HV_FAST_TRAP
832 * FUNCTION: HV_FAST_MEM_SYNC
833 * ARG0: real address
834 * ARG1: length
835 * RET0: status
836 * RET1: length synced
837 * ERRORS: ENORADDR Invalid real address
838 * EBADALIGN Start address or length are not correctly
839 * aligned
840 * EINVAL Length is zero
841 *
842 * Force the next access within the real address to real address plus
843 * length minus 1 to be fetches from main system memory. Less than
844 * the given length may be synced, the actual amount synced is
845 * returned in RET1. The real address and length must be aligned on
846 * an 8K boundary.
847 */
848#define HV_FAST_MEM_SYNC 0x32
849
850/* Time of day services.
851 *
852 * The hypervisor maintains the time of day on a per-domain basis.
853 * Changing the time of day in one domain does not affect the time of
854 * day on any other domain.
855 *
856 * Time is described by a single unsigned 64-bit word which is the
857 * number of seconds since the UNIX Epoch (00:00:00 UTC, January 1,
858 * 1970).
859 */
860
861/* tod_get()
862 * TRAP: HV_FAST_TRAP
863 * FUNCTION: HV_FAST_TOD_GET
864 * RET0: status
865 * RET1: TOD
866 * ERRORS: EWOULDBLOCK TOD resource is temporarily unavailable
867 * ENOTSUPPORTED If TOD not supported on this platform
868 *
869 * Return the current time of day. May block if TOD access is
870 * temporarily not possible.
871 */
872#define HV_FAST_TOD_GET 0x50
873
874/* tod_set()
875 * TRAP: HV_FAST_TRAP
876 * FUNCTION: HV_FAST_TOD_SET
877 * ARG0: TOD
878 * RET0: status
879 * ERRORS: EWOULDBLOCK TOD resource is temporarily unavailable
880 * ENOTSUPPORTED If TOD not supported on this platform
881 *
882 * The current time of day is set to the value specified in ARG0. May
883 * block if TOD access is temporarily not possible.
884 */
885#define HV_FAST_TOD_SET 0x51
886
887/* Console services */
888
889/* con_getchar()
890 * TRAP: HV_FAST_TRAP
891 * FUNCTION: HV_FAST_CONS_GETCHAR
892 * RET0: status
893 * RET1: character
894 * ERRORS: EWOULDBLOCK No character available.
895 *
896 * Returns a character from the console device. If no character is
897 * available then an EWOULDBLOCK error is returned. If a character is
898 * available, then the returned status is EOK and the character value
899 * is in RET1.
900 *
901 * A virtual BREAK is represented by the 64-bit value -1.
902 *
903 * A virtual HUP signal is represented by the 64-bit value -2.
904 */
905#define HV_FAST_CONS_GETCHAR 0x60
906
907/* con_putchar()
908 * TRAP: HV_FAST_TRAP
909 * FUNCTION: HV_FAST_CONS_PUTCHAR
910 * ARG0: character
911 * RET0: status
912 * ERRORS: EINVAL Illegal character
913 * EWOULDBLOCK Output buffer currentl full, would block
914 *
915 * Send a character to the console device. Only character values
916 * between 0 and 255 may be used. Values outside this range are
917 * invalid except for the 64-bit value -1 which is used to send a
918 * virtual BREAK.
919 */
920#define HV_FAST_CONS_PUTCHAR 0x61
921
922/* Trap trace services.
923 *
924 * The hypervisor provides a trap tracing capability for privileged
925 * code running on each virtual CPU. Privileged code provides a
926 * round-robin trap trace queue within which the hypervisor writes
927 * 64-byte entries detailing hyperprivileged traps taken n behalf of
928 * privileged code. This is provided as a debugging capability for
929 * privileged code.
930 *
931 * The trap trace control structure is 64-bytes long and placed at the
932 * start (offset 0) of the trap trace buffer, and is described as
933 * follows:
934 */
935#ifndef __ASSEMBLY__
936struct hv_trap_trace_control {
937 unsigned long head_offset;
938 unsigned long tail_offset;
939 unsigned long __reserved[0x30 / sizeof(unsigned long)];
940};
941#endif
942#define HV_TRAP_TRACE_CTRL_HEAD_OFFSET 0x00
943#define HV_TRAP_TRACE_CTRL_TAIL_OFFSET 0x08
944
945/* The head offset is the offset of the most recently completed entry
946 * in the trap-trace buffer. The tail offset is the offset of the
947 * next entry to be written. The control structure is owned and
948 * modified by the hypervisor. A guest may not modify the control
949 * structure contents. Attempts to do so will result in undefined
950 * behavior for the guest.
951 *
952 * Each trap trace buffer entry is layed out as follows:
953 */
954#ifndef __ASSEMBLY__
955struct hv_trap_trace_entry {
956 unsigned char type; /* Hypervisor or guest entry? */
957 unsigned char hpstate; /* Hyper-privileged state */
958 unsigned char tl; /* Trap level */
959 unsigned char gl; /* Global register level */
960 unsigned short tt; /* Trap type */
961 unsigned short tag; /* Extended trap identifier */
962 unsigned long tstate; /* Trap state */
963 unsigned long tick; /* Tick */
964 unsigned long tpc; /* Trap PC */
965 unsigned long f1; /* Entry specific */
966 unsigned long f2; /* Entry specific */
967 unsigned long f3; /* Entry specific */
968 unsigned long f4; /* Entry specific */
969};
970#endif
971#define HV_TRAP_TRACE_ENTRY_TYPE 0x00
972#define HV_TRAP_TRACE_ENTRY_HPSTATE 0x01
973#define HV_TRAP_TRACE_ENTRY_TL 0x02
974#define HV_TRAP_TRACE_ENTRY_GL 0x03
975#define HV_TRAP_TRACE_ENTRY_TT 0x04
976#define HV_TRAP_TRACE_ENTRY_TAG 0x06
977#define HV_TRAP_TRACE_ENTRY_TSTATE 0x08
978#define HV_TRAP_TRACE_ENTRY_TICK 0x10
979#define HV_TRAP_TRACE_ENTRY_TPC 0x18
980#define HV_TRAP_TRACE_ENTRY_F1 0x20
981#define HV_TRAP_TRACE_ENTRY_F2 0x28
982#define HV_TRAP_TRACE_ENTRY_F3 0x30
983#define HV_TRAP_TRACE_ENTRY_F4 0x38
984
985/* The type field is encoded as follows. */
986#define HV_TRAP_TYPE_UNDEF 0x00 /* Entry content undefined */
987#define HV_TRAP_TYPE_HV 0x01 /* Hypervisor trap entry */
988#define HV_TRAP_TYPE_GUEST 0xff /* Added via ttrace_addentry() */
989
990/* ttrace_buf_conf()
991 * TRAP: HV_FAST_TRAP
992 * FUNCTION: HV_FAST_TTRACE_BUF_CONF
993 * ARG0: real address
994 * ARG1: number of entries
995 * RET0: status
996 * RET1: number of entries
997 * ERRORS: ENORADDR Invalid real address
998 * EINVAL Size is too small
999 * EBADALIGN Real address not aligned on 64-byte boundary
1000 *
1001 * Requests hypervisor trap tracing and declares a virtual CPU's trap
1002 * trace buffer to the hypervisor. The real address supplies the real
1003 * base address of the trap trace queue and must be 64-byte aligned.
1004 * Specifying a value of 0 for the number of entries disables trap
1005 * tracing for the calling virtual CPU. The buffer allocated must be
1006 * sized for a power of two number of 64-byte trap trace entries plus
1007 * an initial 64-byte control structure.
1008 *
1009 * This may be invoked any number of times so that a virtual CPU may
1010 * relocate a trap trace buffer or create "snapshots" of information.
1011 *
1012 * If the real address is illegal or badly aligned, then trap tracing
1013 * is disabled and an error is returned.
1014 *
1015 * Upon failure with EINVAL, this service call returns in RET1 the
1016 * minimum number of buffer entries required. Upon other failures
1017 * RET1 is undefined.
1018 */
1019#define HV_FAST_TTRACE_BUF_CONF 0x90
1020
1021/* ttrace_buf_info()
1022 * TRAP: HV_FAST_TRAP
1023 * FUNCTION: HV_FAST_TTRACE_BUF_INFO
1024 * RET0: status
1025 * RET1: real address
1026 * RET2: size
1027 * ERRORS: None defined.
1028 *
1029 * Returns the size and location of the previously declared trap-trace
1030 * buffer. In the event that no buffer was previously defined, or the
1031 * buffer is disabled, this call will return a size of zero bytes.
1032 */
1033#define HV_FAST_TTRACE_BUF_INFO 0x91
1034
1035/* ttrace_enable()
1036 * TRAP: HV_FAST_TRAP
1037 * FUNCTION: HV_FAST_TTRACE_ENABLE
1038 * ARG0: enable
1039 * RET0: status
1040 * RET1: previous enable state
1041 * ERRORS: EINVAL No trap trace buffer currently defined
1042 *
1043 * Enable or disable trap tracing, and return the previous enabled
1044 * state in RET1. Future systems may define various flags for the
1045 * enable argument (ARG0), for the moment a guest should pass
1046 * "(uint64_t) -1" to enable, and "(uint64_t) 0" to disable all
1047 * tracing - which will ensure future compatability.
1048 */
1049#define HV_FAST_TTRACE_ENABLE 0x92
1050
1051/* ttrace_freeze()
1052 * TRAP: HV_FAST_TRAP
1053 * FUNCTION: HV_FAST_TTRACE_FREEZE
1054 * ARG0: freeze
1055 * RET0: status
1056 * RET1: previous freeze state
1057 * ERRORS: EINVAL No trap trace buffer currently defined
1058 *
1059 * Freeze or unfreeze trap tracing, returning the previous freeze
1060 * state in RET1. A guest should pass a non-zero value to freeze and
1061 * a zero value to unfreeze all tracing. The returned previous state
1062 * is 0 for not frozen and 1 for frozen.
1063 */
1064#define HV_FAST_TTRACE_FREEZE 0x93
1065
1066/* ttrace_addentry()
1067 * TRAP: HV_TTRACE_ADDENTRY_TRAP
1068 * ARG0: tag (16-bits)
1069 * ARG1: data word 0
1070 * ARG2: data word 1
1071 * ARG3: data word 2
1072 * ARG4: data word 3
1073 * RET0: status
1074 * ERRORS: EINVAL No trap trace buffer currently defined
1075 *
1076 * Add an entry to the trap trace buffer. Upon return only ARG0/RET0
1077 * is modified - none of the other registers holding arguments are
1078 * volatile across this hypervisor service.
1079 */
1080
1081/* Core dump services.
1082 *
1083 * Since the hypervisor viraulizes and thus obscures a lot of the
1084 * physical machine layout and state, traditional OS crash dumps can
1085 * be difficult to diagnose especially when the problem is a
1086 * configuration error of some sort.
1087 *
1088 * The dump services provide an opaque buffer into which the
1089 * hypervisor can place it's internal state in order to assist in
1090 * debugging such situations. The contents are opaque and extremely
1091 * platform and hypervisor implementation specific. The guest, during
1092 * a core dump, requests that the hypervisor update any information in
1093 * the dump buffer in preparation to being dumped as part of the
1094 * domain's memory image.
1095 */
1096
1097/* dump_buf_update()
1098 * TRAP: HV_FAST_TRAP
1099 * FUNCTION: HV_FAST_DUMP_BUF_UPDATE
1100 * ARG0: real address
1101 * ARG1: size
1102 * RET0: status
1103 * RET1: required size of dump buffer
1104 * ERRORS: ENORADDR Invalid real address
1105 * EBADALIGN Real address is not aligned on a 64-byte
1106 * boundary
1107 * EINVAL Size is non-zero but less than minimum size
1108 * required
1109 * ENOTSUPPORTED Operation not supported on current logical
1110 * domain
1111 *
1112 * Declare a domain dump buffer to the hypervisor. The real address
1113 * provided for the domain dump buffer must be 64-byte aligned. The
1114 * size specifies the size of the dump buffer and may be larger than
1115 * the minimum size specified in the machine description. The
1116 * hypervisor will fill the dump buffer with opaque data.
1117 *
1118 * Note: A guest may elect to include dump buffer contents as part of a crash
1119 * dump to assist with debugging. This function may be called any number
1120 * of times so that a guest may relocate a dump buffer, or create
1121 * "snapshots" of any dump-buffer information. Each call to
1122 * dump_buf_update() atomically declares the new dump buffer to the
1123 * hypervisor.
1124 *
1125 * A specified size of 0 unconfigures the dump buffer. If the real
1126 * address is illegal or badly aligned, then any currently active dump
1127 * buffer is disabled and an error is returned.
1128 *
1129 * In the event that the call fails with EINVAL, RET1 contains the
1130 * minimum size requires by the hypervisor for a valid dump buffer.
1131 */
1132#define HV_FAST_DUMP_BUF_UPDATE 0x94
1133
1134/* dump_buf_info()
1135 * TRAP: HV_FAST_TRAP
1136 * FUNCTION: HV_FAST_DUMP_BUF_INFO
1137 * RET0: status
1138 * RET1: real address of current dump buffer
1139 * RET2: size of current dump buffer
1140 * ERRORS: No errors defined.
1141 *
1142 * Return the currently configures dump buffer description. A
1143 * returned size of 0 bytes indicates an undefined dump buffer. In
1144 * this case the return address in RET1 is undefined.
1145 */
1146#define HV_FAST_DUMP_BUF_INFO 0x95
1147
1148/* Device interrupt services.
1149 *
1150 * Device interrupts are allocated to system bus bridges by the hypervisor,
1151 * and described to OBP in the machine description. OBP then describes
1152 * these interrupts to the OS via properties in the device tree.
1153 *
1154 * Terminology:
1155 *
1156 * cpuid Unique opaque value which represents a target cpu.
1157 *
1158 * devhandle Device handle. It uniquely identifies a device, and
1159 * consistes of the lower 28-bits of the hi-cell of the
1160 * first entry of the device's "reg" property in the
1161 * OBP device tree.
1162 *
1163 * devino Device interrupt number. Specifies the relative
1164 * interrupt number within the device. The unique
1165 * combination of devhandle and devino are used to
1166 * identify a specific device interrupt.
1167 *
1168 * Note: The devino value is the same as the values in the
1169 * "interrupts" property or "interrupt-map" property
1170 * in the OBP device tree for that device.
1171 *
1172 * sysino System interrupt number. A 64-bit unsigned interger
1173 * representing a unique interrupt within a virtual
1174 * machine.
1175 *
1176 * intr_state A flag representing the interrupt state for a given
1177 * sysino. The state values are defined below.
1178 *
1179 * intr_enabled A flag representing the 'enabled' state for a given
1180 * sysino. The enable values are defined below.
1181 */
1182
1183#define HV_INTR_STATE_IDLE 0 /* Nothing pending */
1184#define HV_INTR_STATE_RECEIVED 1 /* Interrupt received by hardware */
1185#define HV_INTR_STATE_DELIVERED 2 /* Interrupt delivered to queue */
1186
1187#define HV_INTR_DISABLED 0 /* sysino not enabled */
1188#define HV_INTR_ENABLED 1 /* sysino enabled */
1189
1190/* intr_devino_to_sysino()
1191 * TRAP: HV_FAST_TRAP
1192 * FUNCTION: HV_FAST_INTR_DEVINO2SYSINO
1193 * ARG0: devhandle
1194 * ARG1: devino
1195 * RET0: status
1196 * RET1: sysino
1197 * ERRORS: EINVAL Invalid devhandle/devino
1198 *
1199 * Converts a device specific interrupt number of the given
1200 * devhandle/devino into a system specific ino (sysino).
1201 */
1202#define HV_FAST_INTR_DEVINO2SYSINO 0xa0
1203
1204/* intr_getenabled()
1205 * TRAP: HV_FAST_TRAP
1206 * FUNCTION: HV_FAST_INTR_GETENABLED
1207 * ARG0: sysino
1208 * RET0: status
1209 * RET1: intr_enabled (HV_INTR_{DISABLED,ENABLED})
1210 * ERRORS: EINVAL Invalid sysino
1211 *
1212 * Returns interrupt enabled state in RET1 for the interrupt defined
1213 * by the given sysino.
1214 */
1215#define HV_FAST_INTR_GETENABLED 0xa1
1216
1217/* intr_setenabled()
1218 * TRAP: HV_FAST_TRAP
1219 * FUNCTION: HV_FAST_INTR_SETENABLED
1220 * ARG0: sysino
1221 * ARG1: intr_enabled (HV_INTR_{DISABLED,ENABLED})
1222 * RET0: status
1223 * ERRORS: EINVAL Invalid sysino or intr_enabled value
1224 *
1225 * Set the 'enabled' state of the interrupt sysino.
1226 */
1227#define HV_FAST_INTR_SETENABLED 0xa2
1228
1229/* intr_getstate()
1230 * TRAP: HV_FAST_TRAP
1231 * FUNCTION: HV_FAST_INTR_GETSTATE
1232 * ARG0: sysino
1233 * RET0: status
1234 * RET1: intr_state (HV_INTR_STATE_*)
1235 * ERRORS: EINVAL Invalid sysino
1236 *
1237 * Returns current state of the interrupt defined by the given sysino.
1238 */
1239#define HV_FAST_INTR_GETSTATE 0xa3
1240
1241/* intr_setstate()
1242 * TRAP: HV_FAST_TRAP
1243 * FUNCTION: HV_FAST_INTR_SETSTATE
1244 * ARG0: sysino
1245 * ARG1: intr_state (HV_INTR_STATE_*)
1246 * RET0: status
1247 * ERRORS: EINVAL Invalid sysino or intr_state value
1248 *
1249 * Sets the current state of the interrupt described by the given sysino
1250 * value.
1251 *
1252 * Note: Setting the state to HV_INTR_STATE_IDLE clears any pending
1253 * interrupt for sysino.
1254 */
1255#define HV_FAST_INTR_SETSTATE 0xa4
1256
1257/* intr_gettarget()
1258 * TRAP: HV_FAST_TRAP
1259 * FUNCTION: HV_FAST_INTR_GETTARGET
1260 * ARG0: sysino
1261 * RET0: status
1262 * RET1: cpuid
1263 * ERRORS: EINVAL Invalid sysino
1264 *
1265 * Returns CPU that is the current target of the interrupt defined by
1266 * the given sysino. The CPU value returned is undefined if the target
1267 * has not been set via intr_settarget().
1268 */
1269#define HV_FAST_INTR_GETTARGET 0xa5
1270
1271/* intr_settarget()
1272 * TRAP: HV_FAST_TRAP
1273 * FUNCTION: HV_FAST_INTR_SETTARGET
1274 * ARG0: sysino
1275 * ARG1: cpuid
1276 * RET0: status
1277 * ERRORS: EINVAL Invalid sysino
1278 * ENOCPU Invalid cpuid
1279 *
1280 * Set the target CPU for the interrupt defined by the given sysino.
1281 */
1282#define HV_FAST_INTR_SETTARGET 0xa6
1283
1284/* PCI IO services.
1285 *
1286 * See the terminology descriptions in the device interrupt services
1287 * section above as those apply here too. Here are terminology
1288 * definitions specific to these PCI IO services:
1289 *
1290 * tsbnum TSB number. Indentifies which io-tsb is used.
1291 * For this version of the specification, tsbnum
1292 * must be zero.
1293 *
1294 * tsbindex TSB index. Identifies which entry in the TSB
1295 * is used. The first entry is zero.
1296 *
1297 * tsbid A 64-bit aligned data structure which contains
1298 * a tsbnum and a tsbindex. Bits 63:32 contain the
1299 * tsbnum and bits 31:00 contain the tsbindex.
1300 *
1301 * io_attributes IO attributes for IOMMU mappings. One of more
1302 * of the attritbute bits are stores in a 64-bit
1303 * value. The values are defined below.
1304 *
1305 * r_addr 64-bit real address
1306 *
1307 * pci_device PCI device address. A PCI device address identifies
1308 * a specific device on a specific PCI bus segment.
1309 * A PCI device address ia a 32-bit unsigned integer
1310 * with the following format:
1311 *
1312 * 00000000.bbbbbbbb.dddddfff.00000000
1313 *
1314 * Use the HV_PCI_DEVICE_BUILD() macro to construct
1315 * such values.
1316 *
1317 * pci_config_offset
1318 * PCI configureation space offset. For conventional
1319 * PCI a value between 0 and 255. For extended
1320 * configuration space, a value between 0 and 4095.
1321 *
1322 * Note: For PCI configuration space accesses, the offset
1323 * must be aligned to the access size.
1324 *
1325 * error_flag A return value which specifies if the action succeeded
1326 * or failed. 0 means no error, non-0 means some error
1327 * occurred while performing the service.
1328 *
1329 * io_sync_direction
1330 * Direction definition for pci_dma_sync(), defined
1331 * below in HV_PCI_SYNC_*.
1332 *
1333 * io_page_list A list of io_page_addresses, an io_page_address is
1334 * a real address.
1335 *
1336 * io_page_list_p A pointer to an io_page_list.
1337 *
1338 * "size based byte swap" - Some functions do size based byte swapping
1339 * which allows sw to access pointers and
1340 * counters in native form when the processor
1341 * operates in a different endianness than the
1342 * IO bus. Size-based byte swapping converts a
1343 * multi-byte field between big-endian and
1344 * little-endian format.
1345 */
1346
1347#define HV_PCI_MAP_ATTR_READ 0x01
1348#define HV_PCI_MAP_ATTR_WRITE 0x02
1349
1350#define HV_PCI_DEVICE_BUILD(b,d,f) \
1351 ((((b) & 0xff) << 16) | \
1352 (((d) & 0x1f) << 11) | \
1353 (((f) & 0x07) << 8))
1354
1355#define HV_PCI_SYNC_FOR_DEVICE 0x01
1356#define HV_PCI_SYNC_FOR_CPU 0x02
1357
1358/* pci_iommu_map()
1359 * TRAP: HV_FAST_TRAP
1360 * FUNCTION: HV_FAST_PCI_IOMMU_MAP
1361 * ARG0: devhandle
1362 * ARG1: tsbid
1363 * ARG2: #ttes
1364 * ARG3: io_attributes
1365 * ARG4: io_page_list_p
1366 * RET0: status
1367 * RET1: #ttes mapped
1368 * ERRORS: EINVAL Invalid devhandle/tsbnum/tsbindex/io_attributes
1369 * EBADALIGN Improperly aligned real address
1370 * ENORADDR Invalid real address
1371 *
1372 * Create IOMMU mappings in the sun4v device defined by the given
1373 * devhandle. The mappings are created in the TSB defined by the
1374 * tsbnum component of the given tsbid. The first mapping is created
1375 * in the TSB i ndex defined by the tsbindex component of the given tsbid.
1376 * The call creates up to #ttes mappings, the first one at tsbnum, tsbindex,
1377 * the second at tsbnum, tsbindex + 1, etc.
1378 *
1379 * All mappings are created with the attributes defined by the io_attributes
1380 * argument. The page mapping addresses are described in the io_page_list
1381 * defined by the given io_page_list_p, which is a pointer to the io_page_list.
1382 * The first entry in the io_page_list is the address for the first iotte, the
1383 * 2nd for the 2nd iotte, and so on.
1384 *
1385 * Each io_page_address in the io_page_list must be appropriately aligned.
1386 * #ttes must be greater than zero. For this version of the spec, the tsbnum
1387 * component of the given tsbid must be zero.
1388 *
1389 * Returns the actual number of mappings creates, which may be less than
1390 * or equal to the argument #ttes. If the function returns a value which
1391 * is less than the #ttes, the caller may continus to call the function with
1392 * an updated tsbid, #ttes, io_page_list_p arguments until all pages are
1393 * mapped.
1394 *
1395 * Note: This function does not imply an iotte cache flush. The guest must
1396 * demap an entry before re-mapping it.
1397 */
1398#define HV_FAST_PCI_IOMMU_MAP 0xb0
1399
1400/* pci_iommu_demap()
1401 * TRAP: HV_FAST_TRAP
1402 * FUNCTION: HV_FAST_PCI_IOMMU_DEMAP
1403 * ARG0: devhandle
1404 * ARG1: tsbid
1405 * ARG2: #ttes
1406 * RET0: status
1407 * RET1: #ttes demapped
1408 * ERRORS: EINVAL Invalid devhandle/tsbnum/tsbindex
1409 *
1410 * Demap and flush IOMMU mappings in the device defined by the given
1411 * devhandle. Demaps up to #ttes entries in the TSB defined by the tsbnum
1412 * component of the given tsbid, starting at the TSB index defined by the
1413 * tsbindex component of the given tsbid.
1414 *
1415 * For this version of the spec, the tsbnum of the given tsbid must be zero.
1416 * #ttes must be greater than zero.
1417 *
1418 * Returns the actual number of ttes demapped, which may be less than or equal
1419 * to the argument #ttes. If #ttes demapped is less than #ttes, the caller
1420 * may continue to call this function with updated tsbid and #ttes arguments
1421 * until all pages are demapped.
1422 *
1423 * Note: Entries do not have to be mapped to be demapped. A demap of an
1424 * unmapped page will flush the entry from the tte cache.
1425 */
1426#define HV_FAST_PCI_IOMMU_DEMAP 0xb1
1427
1428/* pci_iommu_getmap()
1429 * TRAP: HV_FAST_TRAP
1430 * FUNCTION: HV_FAST_PCI_IOMMU_GETMAP
1431 * ARG0: devhandle
1432 * ARG1: tsbid
1433 * RET0: status
1434 * RET1: io_attributes
1435 * RET2: real address
1436 * ERRORS: EINVAL Invalid devhandle/tsbnum/tsbindex
1437 * ENOMAP Mapping is not valid, no translation exists
1438 *
1439 * Read and return the mapping in the device described by the given devhandle
1440 * and tsbid. If successful, the io_attributes shall be returned in RET1
1441 * and the page address of the mapping shall be returned in RET2.
1442 *
1443 * For this version of the spec, the tsbnum component of the given tsbid
1444 * must be zero.
1445 */
1446#define HV_FAST_PCI_IOMMU_GETMAP 0xb2
1447
1448/* pci_iommu_getbypass()
1449 * TRAP: HV_FAST_TRAP
1450 * FUNCTION: HV_FAST_PCI_IOMMU_GETBYPASS
1451 * ARG0: devhandle
1452 * ARG1: real address
1453 * ARG2: io_attributes
1454 * RET0: status
1455 * RET1: io_addr
1456 * ERRORS: EINVAL Invalid devhandle/io_attributes
1457 * ENORADDR Invalid real address
1458 * ENOTSUPPORTED Function not supported in this implementation.
1459 *
1460 * Create a "special" mapping in the device described by the given devhandle,
1461 * for the given real address and attributes. Return the IO address in RET1
1462 * if successful.
1463 */
1464#define HV_FAST_PCI_IOMMU_GETBYPASS 0xb3
1465
1466/* pci_config_get()
1467 * TRAP: HV_FAST_TRAP
1468 * FUNCTION: HV_FAST_PCI_CONFIG_GET
1469 * ARG0: devhandle
1470 * ARG1: pci_device
1471 * ARG2: pci_config_offset
1472 * ARG3: size
1473 * RET0: status
1474 * RET1: error_flag
1475 * RET2: data
1476 * ERRORS: EINVAL Invalid devhandle/pci_device/offset/size
1477 * EBADALIGN pci_config_offset not size aligned
1478 * ENOACCESS Access to this offset is not permitted
1479 *
1480 * Read PCI configuration space for the adapter described by the given
1481 * devhandle. Read size (1, 2, or 4) bytes of data from the given
1482 * pci_device, at pci_config_offset from the beginning of the device's
1483 * configuration space. If there was no error, RET1 is set to zero and
1484 * RET2 is set to the data read. Insignificant bits in RET2 are not
1485 * guarenteed to have any specific value and therefore must be ignored.
1486 *
1487 * The data returned in RET2 is size based byte swapped.
1488 *
1489 * If an error occurs during the read, set RET1 to a non-zero value. The
1490 * given pci_config_offset must be 'size' aligned.
1491 */
1492#define HV_FAST_PCI_CONFIG_GET 0xb4
1493
1494/* pci_config_put()
1495 * TRAP: HV_FAST_TRAP
1496 * FUNCTION: HV_FAST_PCI_CONFIG_PUT
1497 * ARG0: devhandle
1498 * ARG1: pci_device
1499 * ARG2: pci_config_offset
1500 * ARG3: size
1501 * ARG4: data
1502 * RET0: status
1503 * RET1: error_flag
1504 * ERRORS: EINVAL Invalid devhandle/pci_device/offset/size
1505 * EBADALIGN pci_config_offset not size aligned
1506 * ENOACCESS Access to this offset is not permitted
1507 *
1508 * Write PCI configuration space for the adapter described by the given
1509 * devhandle. Write size (1, 2, or 4) bytes of data in a single operation,
1510 * at pci_config_offset from the beginning of the device's configuration
1511 * space. The data argument contains the data to be written to configuration
1512 * space. Prior to writing, the data is size based byte swapped.
1513 *
1514 * If an error occurs during the write access, do not generate an error
1515 * report, do set RET1 to a non-zero value. Otherwise RET1 is zero.
1516 * The given pci_config_offset must be 'size' aligned.
1517 *
1518 * This function is permitted to read from offset zero in the configuration
1519 * space described by the given pci_device if necessary to ensure that the
1520 * write access to config space completes.
1521 */
1522#define HV_FAST_PCI_CONFIG_PUT 0xb5
1523
1524/* pci_peek()
1525 * TRAP: HV_FAST_TRAP
1526 * FUNCTION: HV_FAST_PCI_PEEK
1527 * ARG0: devhandle
1528 * ARG1: real address
1529 * ARG2: size
1530 * RET0: status
1531 * RET1: error_flag
1532 * RET2: data
1533 * ERRORS: EINVAL Invalid devhandle or size
1534 * EBADALIGN Improperly aligned real address
1535 * ENORADDR Bad real address
1536 * ENOACCESS Guest access prohibited
1537 *
1538 * Attempt to read the IO address given by the given devhandle, real address,
1539 * and size. Size must be 1, 2, 4, or 8. The read is performed as a single
1540 * access operation using the given size. If an error occurs when reading
1541 * from the given location, do not generate an error report, but return a
1542 * non-zero value in RET1. If the read was successful, return zero in RET1
1543 * and return the actual data read in RET2. The data returned is size based
1544 * byte swapped.
1545 *
1546 * Non-significant bits in RET2 are not guarenteed to have any specific value
1547 * and therefore must be ignored. If RET1 is returned as non-zero, the data
1548 * value is not guarenteed to have any specific value and should be ignored.
1549 *
1550 * The caller must have permission to read from the given devhandle, real
1551 * address, which must be an IO address. The argument real address must be a
1552 * size aligned address.
1553 *
1554 * The hypervisor implementation of this function must block access to any
1555 * IO address that the guest does not have explicit permission to access.
1556 */
1557#define HV_FAST_PCI_PEEK 0xb6
1558
1559/* pci_poke()
1560 * TRAP: HV_FAST_TRAP
1561 * FUNCTION: HV_FAST_PCI_POKE
1562 * ARG0: devhandle
1563 * ARG1: real address
1564 * ARG2: size
1565 * ARG3: data
1566 * ARG4: pci_device
1567 * RET0: status
1568 * RET1: error_flag
1569 * ERRORS: EINVAL Invalid devhandle, size, or pci_device
1570 * EBADALIGN Improperly aligned real address
1571 * ENORADDR Bad real address
1572 * ENOACCESS Guest access prohibited
1573 * ENOTSUPPORTED Function is not supported by implementation
1574 *
1575 * Attempt to write data to the IO address given by the given devhandle,
1576 * real address, and size. Size must be 1, 2, 4, or 8. The write is
1577 * performed as a single access operation using the given size. Prior to
1578 * writing the data is size based swapped.
1579 *
1580 * If an error occurs when writing to the given location, do not generate an
1581 * error report, but return a non-zero value in RET1. If the write was
1582 * successful, return zero in RET1.
1583 *
1584 * pci_device describes the configuration address of the device being
1585 * written to. The implementation may safely read from offset 0 with
1586 * the configuration space of the device described by devhandle and
1587 * pci_device in order to guarantee that the write portion of the operation
1588 * completes
1589 *
1590 * Any error that occurs due to the read shall be reported using the normal
1591 * error reporting mechanisms .. the read error is not suppressed.
1592 *
1593 * The caller must have permission to write to the given devhandle, real
1594 * address, which must be an IO address. The argument real address must be a
1595 * size aligned address. The caller must have permission to read from
1596 * the given devhandle, pci_device cofiguration space offset 0.
1597 *
1598 * The hypervisor implementation of this function must block access to any
1599 * IO address that the guest does not have explicit permission to access.
1600 */
1601#define HV_FAST_PCI_POKE 0xb7
1602
1603/* pci_dma_sync()
1604 * TRAP: HV_FAST_TRAP
1605 * FUNCTION: HV_FAST_PCI_DMA_SYNC
1606 * ARG0: devhandle
1607 * ARG1: real address
1608 * ARG2: size
1609 * ARG3: io_sync_direction
1610 * RET0: status
1611 * RET1: #synced
1612 * ERRORS: EINVAL Invalid devhandle or io_sync_direction
1613 * ENORADDR Bad real address
1614 *
1615 * Synchronize a memory region described by the given real address and size,
1616 * for the device defined by the given devhandle using the direction(s)
1617 * defined by the given io_sync_direction. The argument size is the size of
1618 * the memory region in bytes.
1619 *
1620 * Return the actual number of bytes synchronized in the return value #synced,
1621 * which may be less than or equal to the argument size. If the return
1622 * value #synced is less than size, the caller must continue to call this
1623 * function with updated real address and size arguments until the entire
1624 * memory region is synchronized.
1625 */
1626#define HV_FAST_PCI_DMA_SYNC 0xb8
1627
1628/* PCI MSI services. */
1629
1630#define HV_MSITYPE_MSI32 0x00
1631#define HV_MSITYPE_MSI64 0x01
1632
1633#define HV_MSIQSTATE_IDLE 0x00
1634#define HV_MSIQSTATE_ERROR 0x01
1635
1636#define HV_MSIQ_INVALID 0x00
1637#define HV_MSIQ_VALID 0x01
1638
1639#define HV_MSISTATE_IDLE 0x00
1640#define HV_MSISTATE_DELIVERED 0x01
1641
1642#define HV_MSIVALID_INVALID 0x00
1643#define HV_MSIVALID_VALID 0x01
1644
1645#define HV_PCIE_MSGTYPE_PME_MSG 0x18
1646#define HV_PCIE_MSGTYPE_PME_ACK_MSG 0x1b
1647#define HV_PCIE_MSGTYPE_CORR_MSG 0x30
1648#define HV_PCIE_MSGTYPE_NONFATAL_MSG 0x31
1649#define HV_PCIE_MSGTYPE_FATAL_MSG 0x33
1650
1651#define HV_MSG_INVALID 0x00
1652#define HV_MSG_VALID 0x01
1653
1654/* pci_msiq_conf()
1655 * TRAP: HV_FAST_TRAP
1656 * FUNCTION: HV_FAST_PCI_MSIQ_CONF
1657 * ARG0: devhandle
1658 * ARG1: msiqid
1659 * ARG2: real address
1660 * ARG3: number of entries
1661 * RET0: status
1662 * ERRORS: EINVAL Invalid devhandle, msiqid or nentries
1663 * EBADALIGN Improperly aligned real address
1664 * ENORADDR Bad real address
1665 *
1666 * Configure the MSI queue given by the devhandle and msiqid arguments,
1667 * and to be placed at the given real address and be of the given
1668 * number of entries. The real address must be aligned exactly to match
1669 * the queue size. Each queue entry is 64-bytes long, so f.e. a 32 entry
1670 * queue must be aligned on a 2048 byte real address boundary. The MSI-EQ
1671 * Head and Tail are initialized so that the MSI-EQ is 'empty'.
1672 *
1673 * Implementation Note: Certain implementations have fixed sized queues. In
1674 * that case, number of entries must contain the correct
1675 * value.
1676 */
1677#define HV_FAST_PCI_MSIQ_CONF 0xc0
1678
1679/* pci_msiq_info()
1680 * TRAP: HV_FAST_TRAP
1681 * FUNCTION: HV_FAST_PCI_MSIQ_INFO
1682 * ARG0: devhandle
1683 * ARG1: msiqid
1684 * RET0: status
1685 * RET1: real address
1686 * RET2: number of entries
1687 * ERRORS: EINVAL Invalid devhandle or msiqid
1688 *
1689 * Return the configuration information for the MSI queue described
1690 * by the given devhandle and msiqid. The base address of the queue
1691 * is returned in ARG1 and the number of entries is returned in ARG2.
1692 * If the queue is unconfigured, the real address is undefined and the
1693 * number of entries will be returned as zero.
1694 */
1695#define HV_FAST_PCI_MSIQ_INFO 0xc1
1696
1697/* pci_msiq_getvalid()
1698 * TRAP: HV_FAST_TRAP
1699 * FUNCTION: HV_FAST_PCI_MSIQ_GETVALID
1700 * ARG0: devhandle
1701 * ARG1: msiqid
1702 * RET0: status
1703 * RET1: msiqvalid (HV_MSIQ_VALID or HV_MSIQ_INVALID)
1704 * ERRORS: EINVAL Invalid devhandle or msiqid
1705 *
1706 * Get the valid state of the MSI-EQ described by the given devhandle and
1707 * msiqid.
1708 */
1709#define HV_FAST_PCI_MSIQ_GETVALID 0xc2
1710
1711/* pci_msiq_setvalid()
1712 * TRAP: HV_FAST_TRAP
1713 * FUNCTION: HV_FAST_PCI_MSIQ_SETVALID
1714 * ARG0: devhandle
1715 * ARG1: msiqid
1716 * ARG2: msiqvalid (HV_MSIQ_VALID or HV_MSIQ_INVALID)
1717 * RET0: status
1718 * ERRORS: EINVAL Invalid devhandle or msiqid or msiqvalid
1719 * value or MSI EQ is uninitialized
1720 *
1721 * Set the valid state of the MSI-EQ described by the given devhandle and
1722 * msiqid to the given msiqvalid.
1723 */
1724#define HV_FAST_PCI_MSIQ_SETVALID 0xc3
1725
1726/* pci_msiq_getstate()
1727 * TRAP: HV_FAST_TRAP
1728 * FUNCTION: HV_FAST_PCI_MSIQ_GETSTATE
1729 * ARG0: devhandle
1730 * ARG1: msiqid
1731 * RET0: status
1732 * RET1: msiqstate (HV_MSIQSTATE_IDLE or HV_MSIQSTATE_ERROR)
1733 * ERRORS: EINVAL Invalid devhandle or msiqid
1734 *
1735 * Get the state of the MSI-EQ described by the given devhandle and
1736 * msiqid.
1737 */
1738#define HV_FAST_PCI_MSIQ_GETSTATE 0xc4
1739
1740/* pci_msiq_getvalid()
1741 * TRAP: HV_FAST_TRAP
1742 * FUNCTION: HV_FAST_PCI_MSIQ_GETVALID
1743 * ARG0: devhandle
1744 * ARG1: msiqid
1745 * ARG2: msiqstate (HV_MSIQSTATE_IDLE or HV_MSIQSTATE_ERROR)
1746 * RET0: status
1747 * ERRORS: EINVAL Invalid devhandle or msiqid or msiqstate
1748 * value or MSI EQ is uninitialized
1749 *
1750 * Set the state of the MSI-EQ described by the given devhandle and
1751 * msiqid to the given msiqvalid.
1752 */
1753#define HV_FAST_PCI_MSIQ_SETSTATE 0xc5
1754
1755/* pci_msiq_gethead()
1756 * TRAP: HV_FAST_TRAP
1757 * FUNCTION: HV_FAST_PCI_MSIQ_GETHEAD
1758 * ARG0: devhandle
1759 * ARG1: msiqid
1760 * RET0: status
1761 * RET1: msiqhead
1762 * ERRORS: EINVAL Invalid devhandle or msiqid
1763 *
1764 * Get the current MSI EQ queue head for the MSI-EQ described by the
1765 * given devhandle and msiqid.
1766 */
1767#define HV_FAST_PCI_MSIQ_GETHEAD 0xc6
1768
1769/* pci_msiq_sethead()
1770 * TRAP: HV_FAST_TRAP
1771 * FUNCTION: HV_FAST_PCI_MSIQ_SETHEAD
1772 * ARG0: devhandle
1773 * ARG1: msiqid
1774 * ARG2: msiqhead
1775 * RET0: status
1776 * ERRORS: EINVAL Invalid devhandle or msiqid or msiqhead,
1777 * or MSI EQ is uninitialized
1778 *
1779 * Set the current MSI EQ queue head for the MSI-EQ described by the
1780 * given devhandle and msiqid.
1781 */
1782#define HV_FAST_PCI_MSIQ_SETHEAD 0xc7
1783
1784/* pci_msiq_gettail()
1785 * TRAP: HV_FAST_TRAP
1786 * FUNCTION: HV_FAST_PCI_MSIQ_GETTAIL
1787 * ARG0: devhandle
1788 * ARG1: msiqid
1789 * RET0: status
1790 * RET1: msiqtail
1791 * ERRORS: EINVAL Invalid devhandle or msiqid
1792 *
1793 * Get the current MSI EQ queue tail for the MSI-EQ described by the
1794 * given devhandle and msiqid.
1795 */
1796#define HV_FAST_PCI_MSIQ_GETTAIL 0xc8
1797
1798/* pci_msi_getvalid()
1799 * TRAP: HV_FAST_TRAP
1800 * FUNCTION: HV_FAST_PCI_MSI_GETVALID
1801 * ARG0: devhandle
1802 * ARG1: msinum
1803 * RET0: status
1804 * RET1: msivalidstate
1805 * ERRORS: EINVAL Invalid devhandle or msinum
1806 *
1807 * Get the current valid/enabled state for the MSI defined by the
1808 * given devhandle and msinum.
1809 */
1810#define HV_FAST_PCI_MSI_GETVALID 0xc9
1811
1812/* pci_msi_setvalid()
1813 * TRAP: HV_FAST_TRAP
1814 * FUNCTION: HV_FAST_PCI_MSI_SETVALID
1815 * ARG0: devhandle
1816 * ARG1: msinum
1817 * ARG2: msivalidstate
1818 * RET0: status
1819 * ERRORS: EINVAL Invalid devhandle or msinum or msivalidstate
1820 *
1821 * Set the current valid/enabled state for the MSI defined by the
1822 * given devhandle and msinum.
1823 */
1824#define HV_FAST_PCI_MSI_SETVALID 0xca
1825
1826/* pci_msi_getmsiq()
1827 * TRAP: HV_FAST_TRAP
1828 * FUNCTION: HV_FAST_PCI_MSI_GETMSIQ
1829 * ARG0: devhandle
1830 * ARG1: msinum
1831 * RET0: status
1832 * RET1: msiqid
1833 * ERRORS: EINVAL Invalid devhandle or msinum or MSI is unbound
1834 *
1835 * Get the MSI EQ that the MSI defined by the given devhandle and
1836 * msinum is bound to.
1837 */
1838#define HV_FAST_PCI_MSI_GETMSIQ 0xcb
1839
1840/* pci_msi_setmsiq()
1841 * TRAP: HV_FAST_TRAP
1842 * FUNCTION: HV_FAST_PCI_MSI_SETMSIQ
1843 * ARG0: devhandle
1844 * ARG1: msinum
1845 * ARG2: msitype
1846 * ARG3: msiqid
1847 * RET0: status
1848 * ERRORS: EINVAL Invalid devhandle or msinum or msiqid
1849 *
1850 * Set the MSI EQ that the MSI defined by the given devhandle and
1851 * msinum is bound to.
1852 */
1853#define HV_FAST_PCI_MSI_SETMSIQ 0xcc
1854
1855/* pci_msi_getstate()
1856 * TRAP: HV_FAST_TRAP
1857 * FUNCTION: HV_FAST_PCI_MSI_GETSTATE
1858 * ARG0: devhandle
1859 * ARG1: msinum
1860 * RET0: status
1861 * RET1: msistate
1862 * ERRORS: EINVAL Invalid devhandle or msinum
1863 *
1864 * Get the state of the MSI defined by the given devhandle and msinum.
1865 * If not initialized, return HV_MSISTATE_IDLE.
1866 */
1867#define HV_FAST_PCI_MSI_GETSTATE 0xcd
1868
1869/* pci_msi_setstate()
1870 * TRAP: HV_FAST_TRAP
1871 * FUNCTION: HV_FAST_PCI_MSI_SETSTATE
1872 * ARG0: devhandle
1873 * ARG1: msinum
1874 * ARG2: msistate
1875 * RET0: status
1876 * ERRORS: EINVAL Invalid devhandle or msinum or msistate
1877 *
1878 * Set the state of the MSI defined by the given devhandle and msinum.
1879 */
1880#define HV_FAST_PCI_MSI_SETSTATE 0xce
1881
1882/* pci_msg_getmsiq()
1883 * TRAP: HV_FAST_TRAP
1884 * FUNCTION: HV_FAST_PCI_MSG_GETMSIQ
1885 * ARG0: devhandle
1886 * ARG1: msgtype
1887 * RET0: status
1888 * RET1: msiqid
1889 * ERRORS: EINVAL Invalid devhandle or msgtype
1890 *
1891 * Get the MSI EQ of the MSG defined by the given devhandle and msgtype.
1892 */
1893#define HV_FAST_PCI_MSG_GETMSIQ 0xd0
1894
1895/* pci_msg_setmsiq()
1896 * TRAP: HV_FAST_TRAP
1897 * FUNCTION: HV_FAST_PCI_MSG_SETMSIQ
1898 * ARG0: devhandle
1899 * ARG1: msgtype
1900 * ARG2: msiqid
1901 * RET0: status
1902 * ERRORS: EINVAL Invalid devhandle, msgtype, or msiqid
1903 *
1904 * Set the MSI EQ of the MSG defined by the given devhandle and msgtype.
1905 */
1906#define HV_FAST_PCI_MSG_SETMSIQ 0xd1
1907
1908/* pci_msg_getvalid()
1909 * TRAP: HV_FAST_TRAP
1910 * FUNCTION: HV_FAST_PCI_MSG_GETVALID
1911 * ARG0: devhandle
1912 * ARG1: msgtype
1913 * RET0: status
1914 * RET1: msgvalidstate
1915 * ERRORS: EINVAL Invalid devhandle or msgtype
1916 *
1917 * Get the valid/enabled state of the MSG defined by the given
1918 * devhandle and msgtype.
1919 */
1920#define HV_FAST_PCI_MSG_GETVALID 0xd2
1921
1922/* pci_msg_setvalid()
1923 * TRAP: HV_FAST_TRAP
1924 * FUNCTION: HV_FAST_PCI_MSG_SETVALID
1925 * ARG0: devhandle
1926 * ARG1: msgtype
1927 * ARG2: msgvalidstate
1928 * RET0: status
1929 * ERRORS: EINVAL Invalid devhandle or msgtype or msgvalidstate
1930 *
1931 * Set the valid/enabled state of the MSG defined by the given
1932 * devhandle and msgtype.
1933 */
1934#define HV_FAST_PCI_MSG_SETVALID 0xd3
1935
1936/* Performance counter services. */
1937
1938#define HV_PERF_JBUS_PERF_CTRL_REG 0x00
1939#define HV_PERF_JBUS_PERF_CNT_REG 0x01
1940#define HV_PERF_DRAM_PERF_CTRL_REG_0 0x02
1941#define HV_PERF_DRAM_PERF_CNT_REG_0 0x03
1942#define HV_PERF_DRAM_PERF_CTRL_REG_1 0x04
1943#define HV_PERF_DRAM_PERF_CNT_REG_1 0x05
1944#define HV_PERF_DRAM_PERF_CTRL_REG_2 0x06
1945#define HV_PERF_DRAM_PERF_CNT_REG_2 0x07
1946#define HV_PERF_DRAM_PERF_CTRL_REG_3 0x08
1947#define HV_PERF_DRAM_PERF_CNT_REG_3 0x09
1948
1949/* get_perfreg()
1950 * TRAP: HV_FAST_TRAP
1951 * FUNCTION: HV_FAST_GET_PERFREG
1952 * ARG0: performance reg number
1953 * RET0: status
1954 * RET1: performance reg value
1955 * ERRORS: EINVAL Invalid performance register number
1956 * ENOACCESS No access allowed to performance counters
1957 *
1958 * Read the value of the given DRAM/JBUS performance counter/control register.
1959 */
1960#define HV_FAST_GET_PERFREG 0x100
1961
1962/* set_perfreg()
1963 * TRAP: HV_FAST_TRAP
1964 * FUNCTION: HV_FAST_SET_PERFREG
1965 * ARG0: performance reg number
1966 * ARG1: performance reg value
1967 * RET0: status
1968 * ERRORS: EINVAL Invalid performance register number
1969 * ENOACCESS No access allowed to performance counters
1970 *
1971 * Write the given performance reg value to the given DRAM/JBUS
1972 * performance counter/control register.
1973 */
1974#define HV_FAST_SET_PERFREG 0x101
1975
1976/* MMU statistics services.
1977 *
1978 * The hypervisor maintains MMU statistics and privileged code provides
1979 * a buffer where these statistics can be collected. It is continually
1980 * updated once configured. The layout is as follows:
1981 */
1982#ifndef __ASSEMBLY__
1983struct hv_mmu_statistics {
1984 unsigned long immu_tsb_hits_ctx0_8k_tte;
1985 unsigned long immu_tsb_ticks_ctx0_8k_tte;
1986 unsigned long immu_tsb_hits_ctx0_64k_tte;
1987 unsigned long immu_tsb_ticks_ctx0_64k_tte;
1988 unsigned long __reserved1[2];
1989 unsigned long immu_tsb_hits_ctx0_4mb_tte;
1990 unsigned long immu_tsb_ticks_ctx0_4mb_tte;
1991 unsigned long __reserved2[2];
1992 unsigned long immu_tsb_hits_ctx0_256mb_tte;
1993 unsigned long immu_tsb_ticks_ctx0_256mb_tte;
1994 unsigned long __reserved3[4];
1995 unsigned long immu_tsb_hits_ctxnon0_8k_tte;
1996 unsigned long immu_tsb_ticks_ctxnon0_8k_tte;
1997 unsigned long immu_tsb_hits_ctxnon0_64k_tte;
1998 unsigned long immu_tsb_ticks_ctxnon0_64k_tte;
1999 unsigned long __reserved4[2];
2000 unsigned long immu_tsb_hits_ctxnon0_4mb_tte;
2001 unsigned long immu_tsb_ticks_ctxnon0_4mb_tte;
2002 unsigned long __reserved5[2];
2003 unsigned long immu_tsb_hits_ctxnon0_256mb_tte;
2004 unsigned long immu_tsb_ticks_ctxnon0_256mb_tte;
2005 unsigned long __reserved6[4];
2006 unsigned long dmmu_tsb_hits_ctx0_8k_tte;
2007 unsigned long dmmu_tsb_ticks_ctx0_8k_tte;
2008 unsigned long dmmu_tsb_hits_ctx0_64k_tte;
2009 unsigned long dmmu_tsb_ticks_ctx0_64k_tte;
2010 unsigned long __reserved7[2];
2011 unsigned long dmmu_tsb_hits_ctx0_4mb_tte;
2012 unsigned long dmmu_tsb_ticks_ctx0_4mb_tte;
2013 unsigned long __reserved8[2];
2014 unsigned long dmmu_tsb_hits_ctx0_256mb_tte;
2015 unsigned long dmmu_tsb_ticks_ctx0_256mb_tte;
2016 unsigned long __reserved9[4];
2017 unsigned long dmmu_tsb_hits_ctxnon0_8k_tte;
2018 unsigned long dmmu_tsb_ticks_ctxnon0_8k_tte;
2019 unsigned long dmmu_tsb_hits_ctxnon0_64k_tte;
2020 unsigned long dmmu_tsb_ticks_ctxnon0_64k_tte;
2021 unsigned long __reserved10[2];
2022 unsigned long dmmu_tsb_hits_ctxnon0_4mb_tte;
2023 unsigned long dmmu_tsb_ticks_ctxnon0_4mb_tte;
2024 unsigned long __reserved11[2];
2025 unsigned long dmmu_tsb_hits_ctxnon0_256mb_tte;
2026 unsigned long dmmu_tsb_ticks_ctxnon0_256mb_tte;
2027 unsigned long __reserved12[4];
2028};
2029#endif
2030
2031/* mmustat_conf()
2032 * TRAP: HV_FAST_TRAP
2033 * FUNCTION: HV_FAST_MMUSTAT_CONF
2034 * ARG0: real address
2035 * RET0: status
2036 * RET1: real address
2037 * ERRORS: ENORADDR Invalid real address
2038 * EBADALIGN Real address not aligned on 64-byte boundary
2039 * EBADTRAP API not supported on this processor
2040 *
2041 * Enable MMU statistic gathering using the buffer at the given real
2042 * address on the current virtual CPU. The new buffer real address
2043 * is given in ARG1, and the previously specified buffer real address
2044 * is returned in RET1, or is returned as zero for the first invocation.
2045 *
2046 * If the passed in real address argument is zero, this will disable
2047 * MMU statistic collection on the current virtual CPU. If an error is
2048 * returned then no statistics are collected.
2049 *
2050 * The buffer contents should be initialized to all zeros before being
2051 * given to the hypervisor or else the statistics will be meaningless.
2052 */
2053#define HV_FAST_MMUSTAT_CONF 0x102
2054
2055/* mmustat_info()
2056 * TRAP: HV_FAST_TRAP
2057 * FUNCTION: HV_FAST_MMUSTAT_INFO
2058 * RET0: status
2059 * RET1: real address
2060 * ERRORS: EBADTRAP API not supported on this processor
2061 *
2062 * Return the current state and real address of the currently configured
2063 * MMU statistics buffer on the current virtual CPU.
2064 */
2065#define HV_FAST_MMUSTAT_INFO 0x103
2066
2067/* Function numbers for HV_CORE_TRAP. */
2068#define HV_CORE_VER 0x00
2069#define HV_CORE_PUTCHAR 0x01
2070#define HV_CORE_EXIT 0x02
2071
2072#endif /* !(_SPARC64_HYPERVISOR_H) */
generated by cgit v1.2.2 (git 2.25.0) at 2024-12-22 10:08:26 -0500