aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--drivers/i2c/chips/Kconfig10
-rw-r--r--drivers/i2c/chips/Makefile1
-rw-r--r--drivers/i2c/chips/menelaus.c1281
-rw-r--r--drivers/rtc/Kconfig9
4 files changed, 1301 insertions, 0 deletions
diff --git a/drivers/i2c/chips/Kconfig b/drivers/i2c/chips/Kconfig
index 3944e889cb21..2e1c24f671cf 100644
--- a/drivers/i2c/chips/Kconfig
+++ b/drivers/i2c/chips/Kconfig
@@ -153,4 +153,14 @@ config SENSORS_TSL2550
153 This driver can also be built as a module. If so, the module 153 This driver can also be built as a module. If so, the module
154 will be called tsl2550. 154 will be called tsl2550.
155 155
156config MENELAUS
157 bool "TWL92330/Menelaus PM chip"
158 depends on I2C=y && ARCH_OMAP24XX
159 help
160 If you say yes here you get support for the Texas Instruments
161 TWL92330/Menelaus Power Management chip. This include voltage
162 regulators, Dual slot memory card tranceivers, real-time clock
163 and other features that are often used in portable devices like
164 cell phones and PDAs.
165
156endmenu 166endmenu
diff --git a/drivers/i2c/chips/Makefile b/drivers/i2c/chips/Makefile
index d8cbeb3f4b63..ca924e105959 100644
--- a/drivers/i2c/chips/Makefile
+++ b/drivers/i2c/chips/Makefile
@@ -13,6 +13,7 @@ obj-$(CONFIG_SENSORS_PCF8574) += pcf8574.o
13obj-$(CONFIG_SENSORS_PCF8591) += pcf8591.o 13obj-$(CONFIG_SENSORS_PCF8591) += pcf8591.o
14obj-$(CONFIG_ISP1301_OMAP) += isp1301_omap.o 14obj-$(CONFIG_ISP1301_OMAP) += isp1301_omap.o
15obj-$(CONFIG_TPS65010) += tps65010.o 15obj-$(CONFIG_TPS65010) += tps65010.o
16obj-$(CONFIG_MENELAUS) += menelaus.o
16obj-$(CONFIG_SENSORS_TSL2550) += tsl2550.o 17obj-$(CONFIG_SENSORS_TSL2550) += tsl2550.o
17 18
18ifeq ($(CONFIG_I2C_DEBUG_CHIP),y) 19ifeq ($(CONFIG_I2C_DEBUG_CHIP),y)
diff --git a/drivers/i2c/chips/menelaus.c b/drivers/i2c/chips/menelaus.c
new file mode 100644
index 000000000000..48a7e2f0bdd3
--- /dev/null
+++ b/drivers/i2c/chips/menelaus.c
@@ -0,0 +1,1281 @@
1#define DEBUG
2/*
3 * Copyright (C) 2004 Texas Instruments, Inc.
4 *
5 * Some parts based tps65010.c:
6 * Copyright (C) 2004 Texas Instruments and
7 * Copyright (C) 2004-2005 David Brownell
8 *
9 * Some parts based on tlv320aic24.c:
10 * Copyright (C) by Kai Svahn <kai.svahn@nokia.com>
11 *
12 * Changes for interrupt handling and clean-up by
13 * Tony Lindgren <tony@atomide.com> and Imre Deak <imre.deak@nokia.com>
14 * Cleanup and generalized support for voltage setting by
15 * Juha Yrjola
16 * Added support for controlling VCORE and regulator sleep states,
17 * Amit Kucheria <amit.kucheria@nokia.com>
18 * Copyright (C) 2005, 2006 Nokia Corporation
19 *
20 * This program is free software; you can redistribute it and/or modify
21 * it under the terms of the GNU General Public License as published by
22 * the Free Software Foundation; either version 2 of the License, or
23 * (at your option) any later version.
24 *
25 * This program is distributed in the hope that it will be useful,
26 * but WITHOUT ANY WARRANTY; without even the implied warranty of
27 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
28 * GNU General Public License for more details.
29 *
30 * You should have received a copy of the GNU General Public License
31 * along with this program; if not, write to the Free Software
32 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
33 */
34
35#include <linux/module.h>
36#include <linux/i2c.h>
37#include <linux/interrupt.h>
38#include <linux/sched.h>
39#include <linux/mutex.h>
40#include <linux/workqueue.h>
41#include <linux/delay.h>
42#include <linux/rtc.h>
43#include <linux/bcd.h>
44
45#include <asm/mach-types.h>
46#include <asm/mach/irq.h>
47
48#include <asm/arch/gpio.h>
49#include <asm/arch/menelaus.h>
50
51#define DRIVER_NAME "menelaus"
52
53#define pr_err(fmt, arg...) printk(KERN_ERR DRIVER_NAME ": ", ## arg);
54
55#define MENELAUS_I2C_ADDRESS 0x72
56
57#define MENELAUS_REV 0x01
58#define MENELAUS_VCORE_CTRL1 0x02
59#define MENELAUS_VCORE_CTRL2 0x03
60#define MENELAUS_VCORE_CTRL3 0x04
61#define MENELAUS_VCORE_CTRL4 0x05
62#define MENELAUS_VCORE_CTRL5 0x06
63#define MENELAUS_DCDC_CTRL1 0x07
64#define MENELAUS_DCDC_CTRL2 0x08
65#define MENELAUS_DCDC_CTRL3 0x09
66#define MENELAUS_LDO_CTRL1 0x0A
67#define MENELAUS_LDO_CTRL2 0x0B
68#define MENELAUS_LDO_CTRL3 0x0C
69#define MENELAUS_LDO_CTRL4 0x0D
70#define MENELAUS_LDO_CTRL5 0x0E
71#define MENELAUS_LDO_CTRL6 0x0F
72#define MENELAUS_LDO_CTRL7 0x10
73#define MENELAUS_LDO_CTRL8 0x11
74#define MENELAUS_SLEEP_CTRL1 0x12
75#define MENELAUS_SLEEP_CTRL2 0x13
76#define MENELAUS_DEVICE_OFF 0x14
77#define MENELAUS_OSC_CTRL 0x15
78#define MENELAUS_DETECT_CTRL 0x16
79#define MENELAUS_INT_MASK1 0x17
80#define MENELAUS_INT_MASK2 0x18
81#define MENELAUS_INT_STATUS1 0x19
82#define MENELAUS_INT_STATUS2 0x1A
83#define MENELAUS_INT_ACK1 0x1B
84#define MENELAUS_INT_ACK2 0x1C
85#define MENELAUS_GPIO_CTRL 0x1D
86#define MENELAUS_GPIO_IN 0x1E
87#define MENELAUS_GPIO_OUT 0x1F
88#define MENELAUS_BBSMS 0x20
89#define MENELAUS_RTC_CTRL 0x21
90#define MENELAUS_RTC_UPDATE 0x22
91#define MENELAUS_RTC_SEC 0x23
92#define MENELAUS_RTC_MIN 0x24
93#define MENELAUS_RTC_HR 0x25
94#define MENELAUS_RTC_DAY 0x26
95#define MENELAUS_RTC_MON 0x27
96#define MENELAUS_RTC_YR 0x28
97#define MENELAUS_RTC_WKDAY 0x29
98#define MENELAUS_RTC_AL_SEC 0x2A
99#define MENELAUS_RTC_AL_MIN 0x2B
100#define MENELAUS_RTC_AL_HR 0x2C
101#define MENELAUS_RTC_AL_DAY 0x2D
102#define MENELAUS_RTC_AL_MON 0x2E
103#define MENELAUS_RTC_AL_YR 0x2F
104#define MENELAUS_RTC_COMP_MSB 0x30
105#define MENELAUS_RTC_COMP_LSB 0x31
106#define MENELAUS_S1_PULL_EN 0x32
107#define MENELAUS_S1_PULL_DIR 0x33
108#define MENELAUS_S2_PULL_EN 0x34
109#define MENELAUS_S2_PULL_DIR 0x35
110#define MENELAUS_MCT_CTRL1 0x36
111#define MENELAUS_MCT_CTRL2 0x37
112#define MENELAUS_MCT_CTRL3 0x38
113#define MENELAUS_MCT_PIN_ST 0x39
114#define MENELAUS_DEBOUNCE1 0x3A
115
116#define IH_MENELAUS_IRQS 12
117#define MENELAUS_MMC_S1CD_IRQ 0 /* MMC slot 1 card change */
118#define MENELAUS_MMC_S2CD_IRQ 1 /* MMC slot 2 card change */
119#define MENELAUS_MMC_S1D1_IRQ 2 /* MMC DAT1 low in slot 1 */
120#define MENELAUS_MMC_S2D1_IRQ 3 /* MMC DAT1 low in slot 2 */
121#define MENELAUS_LOWBAT_IRQ 4 /* Low battery */
122#define MENELAUS_HOTDIE_IRQ 5 /* Hot die detect */
123#define MENELAUS_UVLO_IRQ 6 /* UVLO detect */
124#define MENELAUS_TSHUT_IRQ 7 /* Thermal shutdown */
125#define MENELAUS_RTCTMR_IRQ 8 /* RTC timer */
126#define MENELAUS_RTCALM_IRQ 9 /* RTC alarm */
127#define MENELAUS_RTCERR_IRQ 10 /* RTC error */
128#define MENELAUS_PSHBTN_IRQ 11 /* Push button */
129#define MENELAUS_RESERVED12_IRQ 12 /* Reserved */
130#define MENELAUS_RESERVED13_IRQ 13 /* Reserved */
131#define MENELAUS_RESERVED14_IRQ 14 /* Reserved */
132#define MENELAUS_RESERVED15_IRQ 15 /* Reserved */
133
134static void menelaus_work(struct work_struct *_menelaus);
135
136struct menelaus_chip {
137 struct mutex lock;
138 struct i2c_client *client;
139 struct work_struct work;
140#ifdef CONFIG_RTC_DRV_TWL92330
141 struct rtc_device *rtc;
142 u8 rtc_control;
143 unsigned uie:1;
144#endif
145 unsigned vcore_hw_mode:1;
146 u8 mask1, mask2;
147 void (*handlers[16])(struct menelaus_chip *);
148 void (*mmc_callback)(void *data, u8 mask);
149 void *mmc_callback_data;
150};
151
152static struct menelaus_chip *the_menelaus;
153
154static int menelaus_write_reg(int reg, u8 value)
155{
156 int val = i2c_smbus_write_byte_data(the_menelaus->client, reg, value);
157
158 if (val < 0) {
159 pr_err("write error");
160 return val;
161 }
162
163 return 0;
164}
165
166static int menelaus_read_reg(int reg)
167{
168 int val = i2c_smbus_read_byte_data(the_menelaus->client, reg);
169
170 if (val < 0)
171 pr_err("read error");
172
173 return val;
174}
175
176static int menelaus_enable_irq(int irq)
177{
178 if (irq > 7) {
179 irq -= 8;
180 the_menelaus->mask2 &= ~(1 << irq);
181 return menelaus_write_reg(MENELAUS_INT_MASK2,
182 the_menelaus->mask2);
183 } else {
184 the_menelaus->mask1 &= ~(1 << irq);
185 return menelaus_write_reg(MENELAUS_INT_MASK1,
186 the_menelaus->mask1);
187 }
188}
189
190static int menelaus_disable_irq(int irq)
191{
192 if (irq > 7) {
193 irq -= 8;
194 the_menelaus->mask2 |= (1 << irq);
195 return menelaus_write_reg(MENELAUS_INT_MASK2,
196 the_menelaus->mask2);
197 } else {
198 the_menelaus->mask1 |= (1 << irq);
199 return menelaus_write_reg(MENELAUS_INT_MASK1,
200 the_menelaus->mask1);
201 }
202}
203
204static int menelaus_ack_irq(int irq)
205{
206 if (irq > 7)
207 return menelaus_write_reg(MENELAUS_INT_ACK2, 1 << (irq - 8));
208 else
209 return menelaus_write_reg(MENELAUS_INT_ACK1, 1 << irq);
210}
211
212/* Adds a handler for an interrupt. Does not run in interrupt context */
213static int menelaus_add_irq_work(int irq,
214 void (*handler)(struct menelaus_chip *))
215{
216 int ret = 0;
217
218 mutex_lock(&the_menelaus->lock);
219 the_menelaus->handlers[irq] = handler;
220 ret = menelaus_enable_irq(irq);
221 mutex_unlock(&the_menelaus->lock);
222
223 return ret;
224}
225
226/* Removes handler for an interrupt */
227static int menelaus_remove_irq_work(int irq)
228{
229 int ret = 0;
230
231 mutex_lock(&the_menelaus->lock);
232 ret = menelaus_disable_irq(irq);
233 the_menelaus->handlers[irq] = NULL;
234 mutex_unlock(&the_menelaus->lock);
235
236 return ret;
237}
238
239/*
240 * Gets scheduled when a card detect interrupt happens. Note that in some cases
241 * this line is wired to card cover switch rather than the card detect switch
242 * in each slot. In this case the cards are not seen by menelaus.
243 * FIXME: Add handling for D1 too
244 */
245static void menelaus_mmc_cd_work(struct menelaus_chip *menelaus_hw)
246{
247 int reg;
248 unsigned char card_mask = 0;
249
250 reg = menelaus_read_reg(MENELAUS_MCT_PIN_ST);
251 if (reg < 0)
252 return;
253
254 if (!(reg & 0x1))
255 card_mask |= (1 << 0);
256
257 if (!(reg & 0x2))
258 card_mask |= (1 << 1);
259
260 if (menelaus_hw->mmc_callback)
261 menelaus_hw->mmc_callback(menelaus_hw->mmc_callback_data,
262 card_mask);
263}
264
265/*
266 * Toggles the MMC slots between open-drain and push-pull mode.
267 */
268int menelaus_set_mmc_opendrain(int slot, int enable)
269{
270 int ret, val;
271
272 if (slot != 1 && slot != 2)
273 return -EINVAL;
274 mutex_lock(&the_menelaus->lock);
275 ret = menelaus_read_reg(MENELAUS_MCT_CTRL1);
276 if (ret < 0) {
277 mutex_unlock(&the_menelaus->lock);
278 return ret;
279 }
280 val = ret;
281 if (slot == 1) {
282 if (enable)
283 val |= 1 << 2;
284 else
285 val &= ~(1 << 2);
286 } else {
287 if (enable)
288 val |= 1 << 3;
289 else
290 val &= ~(1 << 3);
291 }
292 ret = menelaus_write_reg(MENELAUS_MCT_CTRL1, val);
293 mutex_unlock(&the_menelaus->lock);
294
295 return ret;
296}
297EXPORT_SYMBOL(menelaus_set_mmc_opendrain);
298
299int menelaus_set_slot_sel(int enable)
300{
301 int ret;
302
303 mutex_lock(&the_menelaus->lock);
304 ret = menelaus_read_reg(MENELAUS_GPIO_CTRL);
305 if (ret < 0)
306 goto out;
307 ret |= 0x02;
308 if (enable)
309 ret |= 1 << 5;
310 else
311 ret &= ~(1 << 5);
312 ret = menelaus_write_reg(MENELAUS_GPIO_CTRL, ret);
313out:
314 mutex_unlock(&the_menelaus->lock);
315 return ret;
316}
317EXPORT_SYMBOL(menelaus_set_slot_sel);
318
319int menelaus_set_mmc_slot(int slot, int enable, int power, int cd_en)
320{
321 int ret, val;
322
323 if (slot != 1 && slot != 2)
324 return -EINVAL;
325 if (power >= 3)
326 return -EINVAL;
327
328 mutex_lock(&the_menelaus->lock);
329
330 ret = menelaus_read_reg(MENELAUS_MCT_CTRL2);
331 if (ret < 0)
332 goto out;
333 val = ret;
334 if (slot == 1) {
335 if (cd_en)
336 val |= (1 << 4) | (1 << 6);
337 else
338 val &= ~((1 << 4) | (1 << 6));
339 } else {
340 if (cd_en)
341 val |= (1 << 5) | (1 << 7);
342 else
343 val &= ~((1 << 5) | (1 << 7));
344 }
345 ret = menelaus_write_reg(MENELAUS_MCT_CTRL2, val);
346 if (ret < 0)
347 goto out;
348
349 ret = menelaus_read_reg(MENELAUS_MCT_CTRL3);
350 if (ret < 0)
351 goto out;
352 val = ret;
353 if (slot == 1) {
354 if (enable)
355 val |= 1 << 0;
356 else
357 val &= ~(1 << 0);
358 } else {
359 int b;
360
361 if (enable)
362 ret |= 1 << 1;
363 else
364 ret &= ~(1 << 1);
365 b = menelaus_read_reg(MENELAUS_MCT_CTRL2);
366 b &= ~0x03;
367 b |= power;
368 ret = menelaus_write_reg(MENELAUS_MCT_CTRL2, b);
369 if (ret < 0)
370 goto out;
371 }
372 /* Disable autonomous shutdown */
373 val &= ~(0x03 << 2);
374 ret = menelaus_write_reg(MENELAUS_MCT_CTRL3, val);
375out:
376 mutex_unlock(&the_menelaus->lock);
377 return ret;
378}
379EXPORT_SYMBOL(menelaus_set_mmc_slot);
380
381int menelaus_register_mmc_callback(void (*callback)(void *data, u8 card_mask),
382 void *data)
383{
384 int ret = 0;
385
386 the_menelaus->mmc_callback_data = data;
387 the_menelaus->mmc_callback = callback;
388 ret = menelaus_add_irq_work(MENELAUS_MMC_S1CD_IRQ,
389 menelaus_mmc_cd_work);
390 if (ret < 0)
391 return ret;
392 ret = menelaus_add_irq_work(MENELAUS_MMC_S2CD_IRQ,
393 menelaus_mmc_cd_work);
394 if (ret < 0)
395 return ret;
396 ret = menelaus_add_irq_work(MENELAUS_MMC_S1D1_IRQ,
397 menelaus_mmc_cd_work);
398 if (ret < 0)
399 return ret;
400 ret = menelaus_add_irq_work(MENELAUS_MMC_S2D1_IRQ,
401 menelaus_mmc_cd_work);
402
403 return ret;
404}
405EXPORT_SYMBOL(menelaus_register_mmc_callback);
406
407void menelaus_unregister_mmc_callback(void)
408{
409 menelaus_remove_irq_work(MENELAUS_MMC_S1CD_IRQ);
410 menelaus_remove_irq_work(MENELAUS_MMC_S2CD_IRQ);
411 menelaus_remove_irq_work(MENELAUS_MMC_S1D1_IRQ);
412 menelaus_remove_irq_work(MENELAUS_MMC_S2D1_IRQ);
413
414 the_menelaus->mmc_callback = NULL;
415 the_menelaus->mmc_callback_data = 0;
416}
417EXPORT_SYMBOL(menelaus_unregister_mmc_callback);
418
419struct menelaus_vtg {
420 const char *name;
421 u8 vtg_reg;
422 u8 vtg_shift;
423 u8 vtg_bits;
424 u8 mode_reg;
425};
426
427struct menelaus_vtg_value {
428 u16 vtg;
429 u16 val;
430};
431
432static int menelaus_set_voltage(const struct menelaus_vtg *vtg, int mV,
433 int vtg_val, int mode)
434{
435 int val, ret;
436 struct i2c_client *c = the_menelaus->client;
437
438 mutex_lock(&the_menelaus->lock);
439 if (vtg == 0)
440 goto set_voltage;
441
442 ret = menelaus_read_reg(vtg->vtg_reg);
443 if (ret < 0)
444 goto out;
445 val = ret & ~(((1 << vtg->vtg_bits) - 1) << vtg->vtg_shift);
446 val |= vtg_val << vtg->vtg_shift;
447
448 dev_dbg(&c->dev, "Setting voltage '%s'"
449 "to %d mV (reg 0x%02x, val 0x%02x)\n",
450 vtg->name, mV, vtg->vtg_reg, val);
451
452 ret = menelaus_write_reg(vtg->vtg_reg, val);
453 if (ret < 0)
454 goto out;
455set_voltage:
456 ret = menelaus_write_reg(vtg->mode_reg, mode);
457out:
458 mutex_unlock(&the_menelaus->lock);
459 if (ret == 0) {
460 /* Wait for voltage to stabilize */
461 msleep(1);
462 }
463 return ret;
464}
465
466static int menelaus_get_vtg_value(int vtg, const struct menelaus_vtg_value *tbl,
467 int n)
468{
469 int i;
470
471 for (i = 0; i < n; i++, tbl++)
472 if (tbl->vtg == vtg)
473 return tbl->val;
474 return -EINVAL;
475}
476
477/*
478 * Vcore can be programmed in two ways:
479 * SW-controlled: Required voltage is programmed into VCORE_CTRL1
480 * HW-controlled: Required range (roof-floor) is programmed into VCORE_CTRL3
481 * and VCORE_CTRL4
482 *
483 * Call correct 'set' function accordingly
484 */
485
486static const struct menelaus_vtg_value vcore_values[] = {
487 { 1000, 0 },
488 { 1025, 1 },
489 { 1050, 2 },
490 { 1075, 3 },
491 { 1100, 4 },
492 { 1125, 5 },
493 { 1150, 6 },
494 { 1175, 7 },
495 { 1200, 8 },
496 { 1225, 9 },
497 { 1250, 10 },
498 { 1275, 11 },
499 { 1300, 12 },
500 { 1325, 13 },
501 { 1350, 14 },
502 { 1375, 15 },
503 { 1400, 16 },
504 { 1425, 17 },
505 { 1450, 18 },
506};
507
508int menelaus_set_vcore_sw(unsigned int mV)
509{
510 int val, ret;
511 struct i2c_client *c = the_menelaus->client;
512
513 val = menelaus_get_vtg_value(mV, vcore_values,
514 ARRAY_SIZE(vcore_values));
515 if (val < 0)
516 return -EINVAL;
517
518 dev_dbg(&c->dev, "Setting VCORE to %d mV (val 0x%02x)\n", mV, val);
519
520 /* Set SW mode and the voltage in one go. */
521 mutex_lock(&the_menelaus->lock);
522 ret = menelaus_write_reg(MENELAUS_VCORE_CTRL1, val);
523 if (ret == 0)
524 the_menelaus->vcore_hw_mode = 0;
525 mutex_unlock(&the_menelaus->lock);
526 msleep(1);
527
528 return ret;
529}
530
531int menelaus_set_vcore_hw(unsigned int roof_mV, unsigned int floor_mV)
532{
533 int fval, rval, val, ret;
534 struct i2c_client *c = the_menelaus->client;
535
536 rval = menelaus_get_vtg_value(roof_mV, vcore_values,
537 ARRAY_SIZE(vcore_values));
538 if (rval < 0)
539 return -EINVAL;
540 fval = menelaus_get_vtg_value(floor_mV, vcore_values,
541 ARRAY_SIZE(vcore_values));
542 if (fval < 0)
543 return -EINVAL;
544
545 dev_dbg(&c->dev, "Setting VCORE FLOOR to %d mV and ROOF to %d mV\n",
546 floor_mV, roof_mV);
547
548 mutex_lock(&the_menelaus->lock);
549 ret = menelaus_write_reg(MENELAUS_VCORE_CTRL3, fval);
550 if (ret < 0)
551 goto out;
552 ret = menelaus_write_reg(MENELAUS_VCORE_CTRL4, rval);
553 if (ret < 0)
554 goto out;
555 if (!the_menelaus->vcore_hw_mode) {
556 val = menelaus_read_reg(MENELAUS_VCORE_CTRL1);
557 /* HW mode, turn OFF byte comparator */
558 val |= ((1 << 7) | (1 << 5));
559 ret = menelaus_write_reg(MENELAUS_VCORE_CTRL1, val);
560 the_menelaus->vcore_hw_mode = 1;
561 }
562 msleep(1);
563out:
564 mutex_unlock(&the_menelaus->lock);
565 return ret;
566}
567
568static const struct menelaus_vtg vmem_vtg = {
569 .name = "VMEM",
570 .vtg_reg = MENELAUS_LDO_CTRL1,
571 .vtg_shift = 0,
572 .vtg_bits = 2,
573 .mode_reg = MENELAUS_LDO_CTRL3,
574};
575
576static const struct menelaus_vtg_value vmem_values[] = {
577 { 1500, 0 },
578 { 1800, 1 },
579 { 1900, 2 },
580 { 2500, 3 },
581};
582
583int menelaus_set_vmem(unsigned int mV)
584{
585 int val;
586
587 if (mV == 0)
588 return menelaus_set_voltage(&vmem_vtg, 0, 0, 0);
589
590 val = menelaus_get_vtg_value(mV, vmem_values, ARRAY_SIZE(vmem_values));
591 if (val < 0)
592 return -EINVAL;
593 return menelaus_set_voltage(&vmem_vtg, mV, val, 0x02);
594}
595EXPORT_SYMBOL(menelaus_set_vmem);
596
597static const struct menelaus_vtg vio_vtg = {
598 .name = "VIO",
599 .vtg_reg = MENELAUS_LDO_CTRL1,
600 .vtg_shift = 2,
601 .vtg_bits = 2,
602 .mode_reg = MENELAUS_LDO_CTRL4,
603};
604
605static const struct menelaus_vtg_value vio_values[] = {
606 { 1500, 0 },
607 { 1800, 1 },
608 { 2500, 2 },
609 { 2800, 3 },
610};
611
612int menelaus_set_vio(unsigned int mV)
613{
614 int val;
615
616 if (mV == 0)
617 return menelaus_set_voltage(&vio_vtg, 0, 0, 0);
618
619 val = menelaus_get_vtg_value(mV, vio_values, ARRAY_SIZE(vio_values));
620 if (val < 0)
621 return -EINVAL;
622 return menelaus_set_voltage(&vio_vtg, mV, val, 0x02);
623}
624EXPORT_SYMBOL(menelaus_set_vio);
625
626static const struct menelaus_vtg_value vdcdc_values[] = {
627 { 1500, 0 },
628 { 1800, 1 },
629 { 2000, 2 },
630 { 2200, 3 },
631 { 2400, 4 },
632 { 2800, 5 },
633 { 3000, 6 },
634 { 3300, 7 },
635};
636
637static const struct menelaus_vtg vdcdc2_vtg = {
638 .name = "VDCDC2",
639 .vtg_reg = MENELAUS_DCDC_CTRL1,
640 .vtg_shift = 0,
641 .vtg_bits = 3,
642 .mode_reg = MENELAUS_DCDC_CTRL2,
643};
644
645static const struct menelaus_vtg vdcdc3_vtg = {
646 .name = "VDCDC3",
647 .vtg_reg = MENELAUS_DCDC_CTRL1,
648 .vtg_shift = 3,
649 .vtg_bits = 3,
650 .mode_reg = MENELAUS_DCDC_CTRL3,
651};
652
653int menelaus_set_vdcdc(int dcdc, unsigned int mV)
654{
655 const struct menelaus_vtg *vtg;
656 int val;
657
658 if (dcdc != 2 && dcdc != 3)
659 return -EINVAL;
660 if (dcdc == 2)
661 vtg = &vdcdc2_vtg;
662 else
663 vtg = &vdcdc3_vtg;
664
665 if (mV == 0)
666 return menelaus_set_voltage(vtg, 0, 0, 0);
667
668 val = menelaus_get_vtg_value(mV, vdcdc_values,
669 ARRAY_SIZE(vdcdc_values));
670 if (val < 0)
671 return -EINVAL;
672 return menelaus_set_voltage(vtg, mV, val, 0x03);
673}
674
675static const struct menelaus_vtg_value vmmc_values[] = {
676 { 1850, 0 },
677 { 2800, 1 },
678 { 3000, 2 },
679 { 3100, 3 },
680};
681
682static const struct menelaus_vtg vmmc_vtg = {
683 .name = "VMMC",
684 .vtg_reg = MENELAUS_LDO_CTRL1,
685 .vtg_shift = 6,
686 .vtg_bits = 2,
687 .mode_reg = MENELAUS_LDO_CTRL7,
688};
689
690int menelaus_set_vmmc(unsigned int mV)
691{
692 int val;
693
694 if (mV == 0)
695 return menelaus_set_voltage(&vmmc_vtg, 0, 0, 0);
696
697 val = menelaus_get_vtg_value(mV, vmmc_values, ARRAY_SIZE(vmmc_values));
698 if (val < 0)
699 return -EINVAL;
700 return menelaus_set_voltage(&vmmc_vtg, mV, val, 0x02);
701}
702EXPORT_SYMBOL(menelaus_set_vmmc);
703
704
705static const struct menelaus_vtg_value vaux_values[] = {
706 { 1500, 0 },
707 { 1800, 1 },
708 { 2500, 2 },
709 { 2800, 3 },
710};
711
712static const struct menelaus_vtg vaux_vtg = {
713 .name = "VAUX",
714 .vtg_reg = MENELAUS_LDO_CTRL1,
715 .vtg_shift = 4,
716 .vtg_bits = 2,
717 .mode_reg = MENELAUS_LDO_CTRL6,
718};
719
720int menelaus_set_vaux(unsigned int mV)
721{
722 int val;
723
724 if (mV == 0)
725 return menelaus_set_voltage(&vaux_vtg, 0, 0, 0);
726
727 val = menelaus_get_vtg_value(mV, vaux_values, ARRAY_SIZE(vaux_values));
728 if (val < 0)
729 return -EINVAL;
730 return menelaus_set_voltage(&vaux_vtg, mV, val, 0x02);
731}
732EXPORT_SYMBOL(menelaus_set_vaux);
733
734int menelaus_get_slot_pin_states(void)
735{
736 return menelaus_read_reg(MENELAUS_MCT_PIN_ST);
737}
738EXPORT_SYMBOL(menelaus_get_slot_pin_states);
739
740int menelaus_set_regulator_sleep(int enable, u32 val)
741{
742 int t, ret;
743 struct i2c_client *c = the_menelaus->client;
744
745 mutex_lock(&the_menelaus->lock);
746 ret = menelaus_write_reg(MENELAUS_SLEEP_CTRL2, val);
747 if (ret < 0)
748 goto out;
749
750 dev_dbg(&c->dev, "regulator sleep configuration: %02x\n", val);
751
752 ret = menelaus_read_reg(MENELAUS_GPIO_CTRL);
753 if (ret < 0)
754 goto out;
755 t = ((1 << 6) | 0x04);
756 if (enable)
757 ret |= t;
758 else
759 ret &= ~t;
760 ret = menelaus_write_reg(MENELAUS_GPIO_CTRL, ret);
761out:
762 mutex_unlock(&the_menelaus->lock);
763 return ret;
764}
765
766/*-----------------------------------------------------------------------*/
767
768/* Handles Menelaus interrupts. Does not run in interrupt context */
769static void menelaus_work(struct work_struct *_menelaus)
770{
771 struct menelaus_chip *menelaus =
772 container_of(_menelaus, struct menelaus_chip, work);
773 void (*handler)(struct menelaus_chip *menelaus);
774
775 while (1) {
776 unsigned isr;
777
778 isr = (menelaus_read_reg(MENELAUS_INT_STATUS2)
779 & ~menelaus->mask2) << 8;
780 isr |= menelaus_read_reg(MENELAUS_INT_STATUS1)
781 & ~menelaus->mask1;
782 if (!isr)
783 break;
784
785 while (isr) {
786 int irq = fls(isr) - 1;
787 isr &= ~(1 << irq);
788
789 mutex_lock(&menelaus->lock);
790 menelaus_disable_irq(irq);
791 menelaus_ack_irq(irq);
792 handler = menelaus->handlers[irq];
793 if (handler)
794 handler(menelaus);
795 menelaus_enable_irq(irq);
796 mutex_unlock(&menelaus->lock);
797 }
798 }
799 enable_irq(menelaus->client->irq);
800}
801
802/*
803 * We cannot use I2C in interrupt context, so we just schedule work.
804 */
805static irqreturn_t menelaus_irq(int irq, void *_menelaus)
806{
807 struct menelaus_chip *menelaus = _menelaus;
808
809 disable_irq_nosync(irq);
810 (void)schedule_work(&menelaus->work);
811
812 return IRQ_HANDLED;
813}
814
815/*-----------------------------------------------------------------------*/
816
817/*
818 * The RTC needs to be set once, then it runs on backup battery power.
819 * It supports alarms, including system wake alarms (from some modes);
820 * and 1/second IRQs if requested.
821 */
822#ifdef CONFIG_RTC_DRV_TWL92330
823
824#define RTC_CTRL_RTC_EN (1 << 0)
825#define RTC_CTRL_AL_EN (1 << 1)
826#define RTC_CTRL_MODE12 (1 << 2)
827#define RTC_CTRL_EVERY_MASK (3 << 3)
828#define RTC_CTRL_EVERY_SEC (0 << 3)
829#define RTC_CTRL_EVERY_MIN (1 << 3)
830#define RTC_CTRL_EVERY_HR (2 << 3)
831#define RTC_CTRL_EVERY_DAY (3 << 3)
832
833#define RTC_UPDATE_EVERY 0x08
834
835#define RTC_HR_PM (1 << 7)
836
837static void menelaus_to_time(char *regs, struct rtc_time *t)
838{
839 t->tm_sec = BCD2BIN(regs[0]);
840 t->tm_min = BCD2BIN(regs[1]);
841 if (the_menelaus->rtc_control & RTC_CTRL_MODE12) {
842 t->tm_hour = BCD2BIN(regs[2] & 0x1f) - 1;
843 if (regs[2] & RTC_HR_PM)
844 t->tm_hour += 12;
845 } else
846 t->tm_hour = BCD2BIN(regs[2] & 0x3f);
847 t->tm_mday = BCD2BIN(regs[3]);
848 t->tm_mon = BCD2BIN(regs[4]) - 1;
849 t->tm_year = BCD2BIN(regs[5]) + 100;
850}
851
852static int time_to_menelaus(struct rtc_time *t, int regnum)
853{
854 int hour, status;
855
856 status = menelaus_write_reg(regnum++, BIN2BCD(t->tm_sec));
857 if (status < 0)
858 goto fail;
859
860 status = menelaus_write_reg(regnum++, BIN2BCD(t->tm_min));
861 if (status < 0)
862 goto fail;
863
864 if (the_menelaus->rtc_control & RTC_CTRL_MODE12) {
865 hour = t->tm_hour + 1;
866 if (hour > 12)
867 hour = RTC_HR_PM | BIN2BCD(hour - 12);
868 else
869 hour = BIN2BCD(hour);
870 } else
871 hour = BIN2BCD(t->tm_hour);
872 status = menelaus_write_reg(regnum++, hour);
873 if (status < 0)
874 goto fail;
875
876 status = menelaus_write_reg(regnum++, BIN2BCD(t->tm_mday));
877 if (status < 0)
878 goto fail;
879
880 status = menelaus_write_reg(regnum++, BIN2BCD(t->tm_mon + 1));
881 if (status < 0)
882 goto fail;
883
884 status = menelaus_write_reg(regnum++, BIN2BCD(t->tm_year - 100));
885 if (status < 0)
886 goto fail;
887
888 return 0;
889fail:
890 dev_err(&the_menelaus->client->dev, "rtc write reg %02x, err %d\n",
891 --regnum, status);
892 return status;
893}
894
895static int menelaus_read_time(struct device *dev, struct rtc_time *t)
896{
897 struct i2c_msg msg[2];
898 char regs[7];
899 int status;
900
901 /* block read date and time registers */
902 regs[0] = MENELAUS_RTC_SEC;
903
904 msg[0].addr = MENELAUS_I2C_ADDRESS;
905 msg[0].flags = 0;
906 msg[0].len = 1;
907 msg[0].buf = regs;
908
909 msg[1].addr = MENELAUS_I2C_ADDRESS;
910 msg[1].flags = I2C_M_RD;
911 msg[1].len = sizeof(regs);
912 msg[1].buf = regs;
913
914 status = i2c_transfer(the_menelaus->client->adapter, msg, 2);
915 if (status != 2) {
916 dev_err(dev, "%s error %d\n", "read", status);
917 return -EIO;
918 }
919
920 menelaus_to_time(regs, t);
921 t->tm_wday = BCD2BIN(regs[6]);
922
923 return 0;
924}
925
926static int menelaus_set_time(struct device *dev, struct rtc_time *t)
927{
928 int status;
929
930 /* write date and time registers */
931 status = time_to_menelaus(t, MENELAUS_RTC_SEC);
932 if (status < 0)
933 return status;
934 status = menelaus_write_reg(MENELAUS_RTC_WKDAY, BIN2BCD(t->tm_wday));
935 if (status < 0) {
936 dev_err(&the_menelaus->client->dev, "rtc write reg %02x",
937 "err %d\n", MENELAUS_RTC_WKDAY, status);
938 return status;
939 }
940
941 /* now commit the write */
942 status = menelaus_write_reg(MENELAUS_RTC_UPDATE, RTC_UPDATE_EVERY);
943 if (status < 0)
944 dev_err(&the_menelaus->client->dev, "rtc commit time, err %d\n",
945 status);
946
947 return 0;
948}
949
950static int menelaus_read_alarm(struct device *dev, struct rtc_wkalrm *w)
951{
952 struct i2c_msg msg[2];
953 char regs[6];
954 int status;
955
956 /* block read alarm registers */
957 regs[0] = MENELAUS_RTC_AL_SEC;
958
959 msg[0].addr = MENELAUS_I2C_ADDRESS;
960 msg[0].flags = 0;
961 msg[0].len = 1;
962 msg[0].buf = regs;
963
964 msg[1].addr = MENELAUS_I2C_ADDRESS;
965 msg[1].flags = I2C_M_RD;
966 msg[1].len = sizeof(regs);
967 msg[1].buf = regs;
968
969 status = i2c_transfer(the_menelaus->client->adapter, msg, 2);
970 if (status != 2) {
971 dev_err(dev, "%s error %d\n", "alarm read", status);
972 return -EIO;
973 }
974
975 menelaus_to_time(regs, &w->time);
976
977 w->enabled = !!(the_menelaus->rtc_control & RTC_CTRL_AL_EN);
978
979 /* NOTE we *could* check if actually pending... */
980 w->pending = 0;
981
982 return 0;
983}
984
985static int menelaus_set_alarm(struct device *dev, struct rtc_wkalrm *w)
986{
987 int status;
988
989 if (the_menelaus->client->irq <= 0 && w->enabled)
990 return -ENODEV;
991
992 /* clear previous alarm enable */
993 if (the_menelaus->rtc_control & RTC_CTRL_AL_EN) {
994 the_menelaus->rtc_control &= ~RTC_CTRL_AL_EN;
995 status = menelaus_write_reg(MENELAUS_RTC_CTRL,
996 the_menelaus->rtc_control);
997 if (status < 0)
998 return status;
999 }
1000
1001 /* write alarm registers */
1002 status = time_to_menelaus(&w->time, MENELAUS_RTC_AL_SEC);
1003 if (status < 0)
1004 return status;
1005
1006 /* enable alarm if requested */
1007 if (w->enabled) {
1008 the_menelaus->rtc_control |= RTC_CTRL_AL_EN;
1009 status = menelaus_write_reg(MENELAUS_RTC_CTRL,
1010 the_menelaus->rtc_control);
1011 }
1012
1013 return status;
1014}
1015
1016#ifdef CONFIG_RTC_INTF_DEV
1017
1018static void menelaus_rtc_update_work(struct menelaus_chip *m)
1019{
1020 /* report 1/sec update */
1021 local_irq_disable();
1022 rtc_update_irq(m->rtc, 1, RTC_IRQF | RTC_UF);
1023 local_irq_enable();
1024}
1025
1026static int menelaus_ioctl(struct device *dev, unsigned cmd, unsigned long arg)
1027{
1028 int status;
1029
1030 if (the_menelaus->client->irq <= 0)
1031 return -ENOIOCTLCMD;
1032
1033 switch (cmd) {
1034 /* alarm IRQ */
1035 case RTC_AIE_ON:
1036 if (the_menelaus->rtc_control & RTC_CTRL_AL_EN)
1037 return 0;
1038 the_menelaus->rtc_control |= RTC_CTRL_AL_EN;
1039 break;
1040 case RTC_AIE_OFF:
1041 if (!(the_menelaus->rtc_control & RTC_CTRL_AL_EN))
1042 return 0;
1043 the_menelaus->rtc_control &= ~RTC_CTRL_AL_EN;
1044 break;
1045 /* 1/second "update" IRQ */
1046 case RTC_UIE_ON:
1047 if (the_menelaus->uie)
1048 return 0;
1049 status = menelaus_remove_irq_work(MENELAUS_RTCTMR_IRQ);
1050 status = menelaus_add_irq_work(MENELAUS_RTCTMR_IRQ,
1051 menelaus_rtc_update_work);
1052 if (status == 0)
1053 the_menelaus->uie = 1;
1054 return status;
1055 case RTC_UIE_OFF:
1056 if (!the_menelaus->uie)
1057 return 0;
1058 status = menelaus_remove_irq_work(MENELAUS_RTCTMR_IRQ);
1059 if (status == 0)
1060 the_menelaus->uie = 0;
1061 return status;
1062 default:
1063 return -ENOIOCTLCMD;
1064 }
1065 return menelaus_write_reg(MENELAUS_RTC_CTRL, the_menelaus->rtc_control);
1066}
1067
1068#else
1069#define menelaus_ioctl NULL
1070#endif
1071
1072/* REVISIT no compensation register support ... */
1073
1074static const struct rtc_class_ops menelaus_rtc_ops = {
1075 .ioctl = menelaus_ioctl,
1076 .read_time = menelaus_read_time,
1077 .set_time = menelaus_set_time,
1078 .read_alarm = menelaus_read_alarm,
1079 .set_alarm = menelaus_set_alarm,
1080};
1081
1082static void menelaus_rtc_alarm_work(struct menelaus_chip *m)
1083{
1084 /* report alarm */
1085 local_irq_disable();
1086 rtc_update_irq(m->rtc, 1, RTC_IRQF | RTC_AF);
1087 local_irq_enable();
1088
1089 /* then disable it; alarms are oneshot */
1090 the_menelaus->rtc_control &= ~RTC_CTRL_AL_EN;
1091 menelaus_write_reg(MENELAUS_RTC_CTRL, the_menelaus->rtc_control);
1092}
1093
1094static inline void menelaus_rtc_init(struct menelaus_chip *m)
1095{
1096 int alarm = (m->client->irq > 0);
1097
1098 /* assume 32KDETEN pin is pulled high */
1099 if (!(menelaus_read_reg(MENELAUS_OSC_CTRL) & 0x80)) {
1100 dev_dbg(&m->client->dev, "no 32k oscillator\n");
1101 return;
1102 }
1103
1104 /* support RTC alarm; it can issue wakeups */
1105 if (alarm) {
1106 if (menelaus_add_irq_work(MENELAUS_RTCALM_IRQ,
1107 menelaus_rtc_alarm_work) < 0) {
1108 dev_err(&m->client->dev, "can't handle RTC alarm\n");
1109 return;
1110 }
1111 device_init_wakeup(&m->client->dev, 1);
1112 }
1113
1114 /* be sure RTC is enabled; allow 1/sec irqs; leave 12hr mode alone */
1115 m->rtc_control = menelaus_read_reg(MENELAUS_RTC_CTRL);
1116 if (!(m->rtc_control & RTC_CTRL_RTC_EN)
1117 || (m->rtc_control & RTC_CTRL_AL_EN)
1118 || (m->rtc_control & RTC_CTRL_EVERY_MASK)) {
1119 if (!(m->rtc_control & RTC_CTRL_RTC_EN)) {
1120 dev_warn(&m->client->dev, "rtc clock needs setting\n");
1121 m->rtc_control |= RTC_CTRL_RTC_EN;
1122 }
1123 m->rtc_control &= ~RTC_CTRL_EVERY_MASK;
1124 m->rtc_control &= ~RTC_CTRL_AL_EN;
1125 menelaus_write_reg(MENELAUS_RTC_CTRL, m->rtc_control);
1126 }
1127
1128 m->rtc = rtc_device_register(DRIVER_NAME,
1129 &m->client->dev,
1130 &menelaus_rtc_ops, THIS_MODULE);
1131 if (IS_ERR(m->rtc)) {
1132 if (alarm) {
1133 menelaus_remove_irq_work(MENELAUS_RTCALM_IRQ);
1134 device_init_wakeup(&m->client->dev, 0);
1135 }
1136 dev_err(&m->client->dev, "can't register RTC: %d\n",
1137 (int) PTR_ERR(m->rtc));
1138 the_menelaus->rtc = NULL;
1139 }
1140}
1141
1142#else
1143
1144static inline void menelaus_rtc_init(struct menelaus_chip *m)
1145{
1146 /* nothing */
1147}
1148
1149#endif
1150
1151/*-----------------------------------------------------------------------*/
1152
1153static struct i2c_driver menelaus_i2c_driver;
1154
1155static int menelaus_probe(struct i2c_client *client)
1156{
1157 struct menelaus_chip *menelaus;
1158 int rev = 0, val;
1159 int err = 0;
1160 struct menelaus_platform_data *menelaus_pdata =
1161 client->dev.platform_data;
1162
1163 if (the_menelaus) {
1164 dev_dbg(&client->dev, "only one %s for now\n",
1165 DRIVER_NAME);
1166 return -ENODEV;
1167 }
1168
1169 menelaus = kzalloc(sizeof *menelaus, GFP_KERNEL);
1170 if (!menelaus)
1171 return -ENOMEM;
1172
1173 i2c_set_clientdata(client, menelaus);
1174
1175 the_menelaus = menelaus;
1176 menelaus->client = client;
1177
1178 /* If a true probe check the device */
1179 rev = menelaus_read_reg(MENELAUS_REV);
1180 if (rev < 0) {
1181 pr_err("device not found");
1182 err = -ENODEV;
1183 goto fail1;
1184 }
1185
1186 /* Ack and disable all Menelaus interrupts */
1187 menelaus_write_reg(MENELAUS_INT_ACK1, 0xff);
1188 menelaus_write_reg(MENELAUS_INT_ACK2, 0xff);
1189 menelaus_write_reg(MENELAUS_INT_MASK1, 0xff);
1190 menelaus_write_reg(MENELAUS_INT_MASK2, 0xff);
1191 menelaus->mask1 = 0xff;
1192 menelaus->mask2 = 0xff;
1193
1194 /* Set output buffer strengths */
1195 menelaus_write_reg(MENELAUS_MCT_CTRL1, 0x73);
1196
1197 if (client->irq > 0) {
1198 err = request_irq(client->irq, menelaus_irq, IRQF_DISABLED,
1199 DRIVER_NAME, menelaus);
1200 if (err) {
1201 dev_dbg(&client->dev, "can't get IRQ %d, err %d",
1202 client->irq, err);
1203 goto fail1;
1204 }
1205 }
1206
1207 mutex_init(&menelaus->lock);
1208 INIT_WORK(&menelaus->work, menelaus_work);
1209
1210 pr_info("Menelaus rev %d.%d\n", rev >> 4, rev & 0x0f);
1211
1212 val = menelaus_read_reg(MENELAUS_VCORE_CTRL1);
1213 if (val < 0)
1214 goto fail2;
1215 if (val & (1 << 7))
1216 menelaus->vcore_hw_mode = 1;
1217 else
1218 menelaus->vcore_hw_mode = 0;
1219
1220 if (menelaus_pdata != NULL && menelaus_pdata->late_init != NULL) {
1221 err = menelaus_pdata->late_init(&client->dev);
1222 if (err < 0)
1223 goto fail2;
1224 }
1225
1226 menelaus_rtc_init(menelaus);
1227
1228 return 0;
1229fail2:
1230 free_irq(client->irq, menelaus);
1231 flush_scheduled_work();
1232fail1:
1233 kfree(menelaus);
1234 return err;
1235}
1236
1237static int __exit menelaus_remove(struct i2c_client *client)
1238{
1239 struct menelaus_chip *menelaus = i2c_get_clientdata(client);
1240
1241 free_irq(client->irq, menelaus);
1242 kfree(menelaus);
1243 i2c_set_clientdata(client, NULL);
1244 the_menelaus = NULL;
1245 return 0;
1246}
1247
1248static struct i2c_driver menelaus_i2c_driver = {
1249 .driver = {
1250 .name = DRIVER_NAME,
1251 },
1252 .probe = menelaus_probe,
1253 .remove = __exit_p(menelaus_remove),
1254};
1255
1256static int __init menelaus_init(void)
1257{
1258 int res;
1259
1260 res = i2c_add_driver(&menelaus_i2c_driver);
1261 if (res < 0) {
1262 pr_err("driver registration failed\n");
1263 return res;
1264 }
1265
1266 return 0;
1267}
1268
1269static void __exit menelaus_exit(void)
1270{
1271 i2c_del_driver(&menelaus_i2c_driver);
1272
1273 /* FIXME: Shutdown menelaus parts that can be shut down */
1274}
1275
1276MODULE_AUTHOR("Texas Instruments, Inc. (and others)");
1277MODULE_DESCRIPTION("I2C interface for Menelaus.");
1278MODULE_LICENSE("GPL");
1279
1280module_init(menelaus_init);
1281module_exit(menelaus_exit);
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index 6210280135c8..cea401feb0f3 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -231,6 +231,15 @@ config RTC_DRV_M41T80_WDT
231 If you say Y here you will get support for the 231 If you say Y here you will get support for the
232 watchdog timer in ST M41T80 RTC chips series. 232 watchdog timer in ST M41T80 RTC chips series.
233 233
234config RTC_DRV_TWL92330
235 boolean "TI TWL92330/Menelaus"
236 depends on RTC_CLASS && I2C && MENELAUS
237 help
238 If you say yes here you get support for the RTC on the
239 TWL92330 "Menelaus" power mangement chip, used with OMAP2
240 platforms. The support is integrated with the rest of
241 the Menelaus driver; it's not separate module.
242
234comment "SPI RTC drivers" 243comment "SPI RTC drivers"
235 depends on RTC_CLASS && SPI_MASTER 244 depends on RTC_CLASS && SPI_MASTER
236 245
generated by cgit v1.2.2 (git 2.25.0) at 2024-12-19 20:26:39 -0500