8 files changed, 471 insertions, 116 deletions

diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile
index 2dc906fdfa55..810e7aac0a53 100644
--- a/drivers/media/video/Makefile
+++ b/drivers/media/video/Makefile
@@ -7,8 +7,7 @@ bttv-objs	:=	bttv-driver.o bttv-cards.o bttv-if.o \
 zoran-objs      :=      zr36120.o zr36120_i2c.o zr36120_mem.o
 zr36067-objs    :=      zoran_procfs.o zoran_device.o \
                         zoran_driver.o zoran_card.o
-tuner-objs      :=      tuner-core.o tuner-simple.o mt20xx.o tda8290.o
-
+tuner-objs      :=      tuner-core.o tuner-simple.o mt20xx.o tda8290.o tea5767.o
 obj-$(CONFIG_VIDEO_DEV) += videodev.o v4l2-common.o v4l1-compat.o
 
 obj-$(CONFIG_VIDEO_BT848) += bttv.o msp3400.o tvaudio.o \
diff --git a/drivers/media/video/mt20xx.c b/drivers/media/video/mt20xx.c
index 95ad17b7f38e..9c005cb128d7 100644
--- a/drivers/media/video/mt20xx.c
+++ b/drivers/media/video/mt20xx.c
@@ -1,5 +1,5 @@
 /*
- * $Id: mt20xx.c,v 1.4 2005/03/04 09:24:56 kraxel Exp $
+ * $Id: mt20xx.c,v 1.5 2005/06/16 08:29:49 nsh Exp $
  *
  * i2c tv tuner chip device driver
  * controls microtune tuners, mt2032 + mt2050 at the moment.
@@ -295,8 +295,8 @@ static void mt2032_set_radio_freq(struct i2c_client *c, unsigned int freq)
         int if2 = t->radio_if2;
 
         // per Manual for FM tuning: first if center freq. 1085 MHz
-        mt2032_set_if_freq(c, freq*62500 /* freq*1000*1000/16 */,
-                           1085*1000*1000,if2,if2,if2);
+        mt2032_set_if_freq(c, freq * 1000 / 16,
+                              1085*1000*1000,if2,if2,if2);
 }
 
 // Initalization as described in "MT203x Programming Procedures", Rev 1.2, Feb.2001
diff --git a/drivers/media/video/tda8290.c b/drivers/media/video/tda8290.c
index b27cc348d95c..f59d4601cc63 100644
--- a/drivers/media/video/tda8290.c
+++ b/drivers/media/video/tda8290.c
@@ -1,5 +1,5 @@
 /*
- * $Id: tda8290.c,v 1.7 2005/03/07 12:01:51 kraxel Exp $
+ * $Id: tda8290.c,v 1.11 2005/06/18 06:09:06 nsh Exp $
  *
  * i2c tv tuner chip device driver
  * controls the philips tda8290+75 tuner chip combo.
@@ -69,7 +69,7 @@ static __u8 get_freq_entry( struct freq_entry* table, __u16 freq)
 static unsigned char i2c_enable_bridge[2] =     { 0x21, 0xC0 };
 static unsigned char i2c_disable_bridge[2] =    { 0x21, 0x80 };
 static unsigned char i2c_init_tda8275[14] =     { 0x00, 0x00, 0x00, 0x00,
-                                                  0x7C, 0x04, 0xA3, 0x3F,
+                                                  0xfC, 0x04, 0xA3, 0x3F,
                                                   0x2A, 0x04, 0xFF, 0x00,
                                                   0x00, 0x40 };
 static unsigned char i2c_set_VS[2] =            { 0x30, 0x6F };
@@ -138,16 +138,24 @@ static int tda8290_tune(struct i2c_client *c)
 
 static void set_frequency(struct tuner *t, u16 ifc)
 {
-        u32 N = (((t->freq<<3)+ifc)&0x3fffc);
+        u32 freq;
+        u32 N;
 
-        N = N >> get_freq_entry(div_table, t->freq);
+        if (t->mode == V4L2_TUNER_RADIO)
+                freq = t->freq / 1000;
+        else
+                freq = t->freq;
+
+        N = (((freq<<3)+ifc)&0x3fffc);
+
+        N = N >> get_freq_entry(div_table, freq);
         t->i2c_set_freq[0] = 0;
         t->i2c_set_freq[1] = (unsigned char)(N>>8);
         t->i2c_set_freq[2] = (unsigned char) N;
         t->i2c_set_freq[3] = 0x40;
         t->i2c_set_freq[4] = 0x52;
-        t->i2c_set_freq[5] = get_freq_entry(band_table, t->freq);
-        t->i2c_set_freq[6] = get_freq_entry(agc_table,  t->freq);
+        t->i2c_set_freq[5] = get_freq_entry(band_table, freq);
+        t->i2c_set_freq[6] = get_freq_entry(agc_table,  freq);
         t->i2c_set_freq[7] = 0x8f;
 }
 
diff --git a/drivers/media/video/tda9887.c b/drivers/media/video/tda9887.c
index 39773633cc3c..ee35562f4d1a 100644
--- a/drivers/media/video/tda9887.c
+++ b/drivers/media/video/tda9887.c
@@ -368,7 +368,7 @@ static int tda9887_set_tvnorm(struct tda9887 *t, char *buf)
                 if (t->radio_mode == V4L2_TUNER_MODE_MONO)
                         norm = &radio_mono;
                 else
-                        norm = &radio_stereo;
+                        norm = &radio_stereo;
         } else {
                 for (i = 0; i < ARRAY_SIZE(tvnorms); i++) {
                         if (tvnorms[i].std & t->std) {
@@ -566,7 +566,6 @@ static int tda9887_configure(struct tda9887 *t)
         if (UNSET != t->pinnacle_id) {
                 tda9887_set_pinnacle(t,buf);
         }
-
         tda9887_set_config(t,buf);
         tda9887_set_insmod(t,buf);
 
@@ -615,8 +614,8 @@ static int tda9887_attach(struct i2c_adapter *adap, int addr, int kind)
         t->pinnacle_id = UNSET;
         t->radio_mode = V4L2_TUNER_MODE_STEREO;
 
-        i2c_set_clientdata(&t->client, t);
-        i2c_attach_client(&t->client);
+        i2c_set_clientdata(&t->client, t);
+        i2c_attach_client(&t->client);
 
         return 0;
 }
diff --git a/drivers/media/video/tea5767.c b/drivers/media/video/tea5767.c
new file mode 100644
index 000000000000..a29f08f81f63
--- /dev/null
+++ b/drivers/media/video/tea5767.c
@@ -0,0 +1,334 @@
+/*
+ * For Philips TEA5767 FM Chip used on some TV Cards like Prolink Pixelview
+ * I2C address is allways 0xC0.
+ *
+ * $Id: tea5767.c,v 1.11 2005/06/21 15:40:33 mchehab Exp $
+ *
+ * Copyright (c) 2005 Mauro Carvalho Chehab (mchehab@brturbo.com.br)
+ * This code is placed under the terms of the GNU General Public License
+ *
+ * tea5767 autodetection thanks to Torsten Seeboth and Atsushi Nakagawa
+ * from their contributions on DScaler.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/string.h>
+#include <linux/timer.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/videodev.h>
+#include <linux/i2c.h>
+#include <linux/i2c-algo-bit.h>
+
+#include <media/tuner.h>
+
+/* Declared at tuner-core.c */
+extern unsigned int tuner_debug;
+
+#define PREFIX "TEA5767 "
+
+/*****************************************************************************/
+
+/******************************
+ * Write mode register values *
+ ******************************/
+
+/* First register */
+#define TEA5767_MUTE            0x80 /* Mutes output */
+#define TEA5767_SEARCH          0x40 /* Activates station search */
+/* Bits 0-5 for divider MSB */
+
+/* Second register */
+/* Bits 0-7 for divider LSB */
+
+/* Third register */
+
+/* Station search from botton to up */
+#define TEA5767_SEARCH_UP       0x80
+
+/* Searches with ADC output = 10 */
+#define TEA5767_SRCH_HIGH_LVL   0x60
+
+/* Searches with ADC output = 10 */
+#define TEA5767_SRCH_MID_LVL    0x40
+
+/* Searches with ADC output = 5 */
+#define TEA5767_SRCH_LOW_LVL    0x20
+
+/* if on, div=4*(Frf+Fif)/Fref otherwise, div=4*(Frf-Fif)/Freq) */
+#define TEA5767_HIGH_LO_INJECT  0x10
+
+/* Disable stereo */
+#define TEA5767_MONO            0x08
+
+/* Disable right channel and turns to mono */
+#define TEA5767_MUTE_RIGHT      0x04
+
+/* Disable left channel and turns to mono */
+#define TEA5767_MUTE_LEFT       0x02
+
+#define TEA5767_PORT1_HIGH      0x01
+
+/* Forth register */
+#define TEA5767_PORT2_HIGH      0x80
+/* Chips stops working. Only I2C bus remains on */
+#define TEA5767_STDBY           0x40
+
+/* Japan freq (76-108 MHz. If disabled, 87.5-108 MHz */
+#define TEA5767_JAPAN_BAND      0x20
+
+/* Unselected means 32.768 KHz freq as reference. Otherwise Xtal at 13 MHz */
+#define TEA5767_XTAL_32768      0x10
+
+/* Cuts weak signals */
+#define TEA5767_SOFT_MUTE       0x08
+
+/* Activates high cut control */
+#define TEA5767_HIGH_CUT_CTRL   0x04
+
+/* Activates stereo noise control */
+#define TEA5767_ST_NOISE_CTL    0x02
+
+/* If activate PORT 1 indicates SEARCH or else it is used as PORT1 */
+#define TEA5767_SRCH_IND        0x01
+
+/* Fiveth register */
+
+/* By activating, it will use Xtal at 13 MHz as reference for divider */
+#define TEA5767_PLLREF_ENABLE   0x80
+
+/* By activating, deemphasis=50, or else, deemphasis of 50us */
+#define TEA5767_DEEMPH_75       0X40
+
+/*****************************
+ * Read mode register values *
+ *****************************/
+
+/* First register */
+#define TEA5767_READY_FLAG_MASK 0x80
+#define TEA5767_BAND_LIMIT_MASK 0X40
+/* Bits 0-5 for divider MSB after search or preset */
+
+/* Second register */
+/* Bits 0-7 for divider LSB after search or preset */
+
+/* Third register */
+#define TEA5767_STEREO_MASK     0x80
+#define TEA5767_IF_CNTR_MASK    0x7f
+
+/* Four register */
+#define TEA5767_ADC_LEVEL_MASK  0xf0
+
+/* should be 0 */
+#define TEA5767_CHIP_ID_MASK    0x0f
+
+/* Fiveth register */
+/* Reserved for future extensions */
+#define TEA5767_RESERVED_MASK   0xff
+
+/*****************************************************************************/
+
+static void set_tv_freq(struct i2c_client *c, unsigned int freq)
+{
+        struct tuner *t = i2c_get_clientdata(c);
+
+        tuner_warn("This tuner doesn't support TV freq.\n");
+}
+
+static void tea5767_status_dump(unsigned char *buffer)
+{
+        unsigned int div, frq;
+
+        if (TEA5767_READY_FLAG_MASK & buffer[0])
+                printk(PREFIX "Ready Flag ON\n");
+        else
+                printk(PREFIX "Ready Flag OFF\n");
+
+        if (TEA5767_BAND_LIMIT_MASK & buffer[0])
+                printk(PREFIX "Tuner at band limit\n");
+        else
+                printk(PREFIX "Tuner not at band limit\n");
+
+        div=((buffer[0]&0x3f)<<8) | buffer[1];
+
+        switch (TEA5767_HIGH_LO_32768) {
+        case TEA5767_HIGH_LO_13MHz:
+                frq = 1000*(div*50-700-225)/4; /* Freq in KHz */
+                break;
+        case TEA5767_LOW_LO_13MHz:
+                frq = 1000*(div*50+700+225)/4; /* Freq in KHz */
+                break;
+        case TEA5767_LOW_LO_32768:
+                frq = 1000*(div*32768/1000+700+225)/4; /* Freq in KHz */
+                break;
+        case TEA5767_HIGH_LO_32768:
+        default:
+                frq = 1000*(div*32768/1000-700-225)/4; /* Freq in KHz */
+                break;
+        }
+        buffer[0] = (div>>8) & 0x3f;
+        buffer[1] = div      & 0xff;
+
+        printk(PREFIX "Frequency %d.%03d KHz (divider = 0x%04x)\n",
+                                                frq/1000,frq%1000,div);
+
+        if (TEA5767_STEREO_MASK & buffer[2])
+                printk(PREFIX "Stereo\n");
+        else
+                printk(PREFIX "Mono\n");
+
+        printk(PREFIX "IF Counter = %d\n",buffer[2] & TEA5767_IF_CNTR_MASK);
+
+        printk(PREFIX "ADC Level = %d\n",(buffer[3] & TEA5767_ADC_LEVEL_MASK)>>4);
+
+        printk(PREFIX "Chip ID = %d\n",(buffer[3] & TEA5767_CHIP_ID_MASK));
+
+        printk(PREFIX "Reserved = 0x%02x\n",(buffer[4] & TEA5767_RESERVED_MASK));
+}
+
+/* Freq should be specifyed at 62.5 Hz */
+static void set_radio_freq(struct i2c_client *c, unsigned int frq)
+{
+        struct tuner *t = i2c_get_clientdata(c);
+        unsigned char buffer[5];
+        unsigned div;
+        int rc;
+
+        if ( tuner_debug )
+                printk(PREFIX "radio freq counter %d\n",frq);
+
+        /* Rounds freq to next decimal value - for 62.5 KHz step */
+        /* frq = 20*(frq/16)+radio_frq[frq%16]; */
+
+        buffer[2] = TEA5767_PORT1_HIGH;
+        buffer[3] = TEA5767_PORT2_HIGH | TEA5767_HIGH_CUT_CTRL | TEA5767_ST_NOISE_CTL | TEA5767_JAPAN_BAND;
+        buffer[4]=0;
+
+        if (t->audmode == V4L2_TUNER_MODE_MONO) {
+                tuner_dbg("TEA5767 set to mono\n");
+                buffer[2] |= TEA5767_MONO;
+        } else
+                tuner_dbg("TEA5767 set to stereo\n");
+
+        switch (t->type) {
+        case TEA5767_HIGH_LO_13MHz:
+                tuner_dbg("TEA5767 radio HIGH LO inject xtal @ 13 MHz\n");
+                buffer[2] |= TEA5767_HIGH_LO_INJECT;
+                buffer[4] |= TEA5767_PLLREF_ENABLE;
+                div = (frq*4/16+700+225+25)/50;
+                break;
+        case TEA5767_LOW_LO_13MHz:
+                tuner_dbg("TEA5767 radio LOW LO inject xtal @ 13 MHz\n");
+
+                buffer[4] |= TEA5767_PLLREF_ENABLE;
+                div = (frq*4/16-700-225+25)/50;
+                break;
+        case TEA5767_LOW_LO_32768:
+                tuner_dbg("TEA5767 radio LOW LO inject xtal @ 32,768 MHz\n");
+                buffer[3] |= TEA5767_XTAL_32768;
+                /* const 700=4000*175 Khz - to adjust freq to right value */
+                div = (1000*(frq*4/16-700-225)+16384)>>15;
+                break;
+        case TEA5767_HIGH_LO_32768:
+        default:
+                tuner_dbg("TEA5767 radio HIGH LO inject xtal @ 32,768 MHz\n");
+
+                buffer[2] |= TEA5767_HIGH_LO_INJECT;
+                buffer[3] |= TEA5767_XTAL_32768;
+                div = (1000*(frq*4/16+700+225)+16384)>>15;
+                break;
+        }
+        buffer[0] = (div>>8) & 0x3f;
+        buffer[1] = div      & 0xff;
+
+        if ( tuner_debug )
+                tea5767_status_dump(buffer);
+
+        if (5 != (rc = i2c_master_send(c,buffer,5)))
+                tuner_warn("i2c i/o error: rc == %d (should be 5)\n",rc);
+}
+
+static int tea5767_signal(struct i2c_client *c)
+{
+        unsigned char buffer[5];
+        int rc;
+        struct tuner *t = i2c_get_clientdata(c);
+
+        memset(buffer,0,sizeof(buffer));
+        if (5 != (rc = i2c_master_recv(c,buffer,5)))
+                tuner_warn ( "i2c i/o error: rc == %d (should be 5)\n",rc);
+
+        return ((buffer[3] & TEA5767_ADC_LEVEL_MASK) <<(13-4));
+}
+
+static int tea5767_stereo(struct i2c_client *c)
+{
+        unsigned char buffer[5];
+        int rc;
+        struct tuner *t = i2c_get_clientdata(c);
+
+        memset(buffer,0,sizeof(buffer));
+        if (5 != (rc = i2c_master_recv(c,buffer,5)))
+                tuner_warn ( "i2c i/o error: rc == %d (should be 5)\n",rc);
+
+        rc = buffer[2] & TEA5767_STEREO_MASK;
+
+        if ( tuner_debug )
+                tuner_dbg("TEA5767 radio ST GET = %02x\n", rc);
+
+        return ( (buffer[2] & TEA5767_STEREO_MASK) ? V4L2_TUNER_SUB_STEREO: 0);
+}
+
+int tea_detection(struct i2c_client *c)
+{
+        unsigned char buffer[5]= { 0xff, 0xff, 0xff, 0xff, 0xff };
+        int rc;
+        struct tuner *t = i2c_get_clientdata(c);
+
+        if (5 != (rc = i2c_master_recv(c,buffer,5))) {
+                tuner_warn ( "it is not a TEA5767. Received %i chars.\n",rc );
+                return EINVAL;
+        }
+
+        /* If all bytes are the same then it's a TV tuner and not a tea5767 chip. */
+        if (buffer[0] == buffer[1] &&  buffer[0] == buffer[2] &&
+            buffer[0] == buffer[3] &&  buffer[0] == buffer[4]) {
+                tuner_warn ( "All bytes are equal. It is not a TEA5767\n" );
+                return EINVAL;
+        }
+
+        /*  Status bytes:
+         *  Byte 4: bit 3:1 : CI (Chip Identification) == 0
+         *          bit 0   : internally set to 0
+         *  Byte 5: bit 7:0 : == 0
+         */
+
+        if (!((buffer[3] & 0x0f) == 0x00) && (buffer[4] == 0x00)) {
+                tuner_warn ( "Chip ID is not zero. It is not a TEA5767\n" );
+                return EINVAL;
+        }
+        tuner_warn ( "TEA5767 detected.\n" );
+        return 0;
+}
+
+int tea5767_tuner_init(struct i2c_client *c)
+{
+        struct tuner *t = i2c_get_clientdata(c);
+
+        if (tea_detection(c)==EINVAL) return EINVAL;
+
+        tuner_info("type set to %d (%s)\n",
+                   t->type, TEA5767_TUNER_NAME);
+        strlcpy(c->name, TEA5767_TUNER_NAME, sizeof(c->name));
+
+        t->tv_freq    = set_tv_freq;
+        t->radio_freq = set_radio_freq;
+        t->has_signal = tea5767_signal;
+        t->is_stereo  = tea5767_stereo;
+
+        return (0);
+}
diff --git a/drivers/media/video/tuner-core.c b/drivers/media/video/tuner-core.c
index eaabfc858703..6f6bf4a633fc 100644
--- a/drivers/media/video/tuner-core.c
+++ b/drivers/media/video/tuner-core.c
@@ -1,5 +1,5 @@
 /*
- * $Id: tuner-core.c,v 1.15 2005/06/12 01:36:14 mchehab Exp $
+ * $Id: tuner-core.c,v 1.29 2005/06/21 15:40:33 mchehab Exp $
  *
  * i2c tv tuner chip device driver
  * core core, i.e. kernel interfaces, registering and so on
@@ -26,7 +26,6 @@
 /*
  * comment line bellow to return to old behavor, where only one I2C device is supported
  */
-#define CONFIG_TUNER_MULTI_I2C /**/
 
 #define UNSET (-1U)
 
@@ -58,9 +57,7 @@ MODULE_AUTHOR("Ralph Metzler, Gerd Knorr, Gunther Mayer");
 MODULE_LICENSE("GPL");
 
 static int this_adap;
-#ifdef CONFIG_TUNER_MULTI_I2C
 static unsigned short first_tuner, tv_tuner, radio_tuner;
-#endif
 
 static struct i2c_driver driver;
 static struct i2c_client client_template;
@@ -81,26 +78,9 @@ static void set_tv_freq(struct i2c_client *c, unsigned int freq)
                 return;
         }
         if (freq < tv_range[0]*16 || freq > tv_range[1]*16) {
-
-                if (freq >= tv_range[0]*16364 && freq <= tv_range[1]*16384) {
-                        /* V4L2_TUNER_CAP_LOW frequency */
-
-                        tuner_dbg("V4L2_TUNER_CAP_LOW freq selected for TV. Tuners yet doesn't support converting it to valid freq.\n");
-
-                        t->tv_freq(c,freq>>10);
-
-                        return;
-                } else {
-                        /* FIXME: better do that chip-specific, but
-                           right now we don't have that in the config
-                           struct and this way is still better than no
-                           check at all */
                         tuner_info("TV freq (%d.%02d) out of range (%d-%d)\n",
                                    freq/16,freq%16*100/16,tv_range[0],tv_range[1]);
-                        return;
-                }
         }
-        tuner_dbg("62.5 Khz freq step selected for TV.\n");
         t->tv_freq(c,freq);
 }
 
@@ -116,31 +96,18 @@ static void set_radio_freq(struct i2c_client *c, unsigned int freq)
                 tuner_info("no radio tuning for this one, sorry.\n");
                 return;
         }
-        if (freq < radio_range[0]*16 || freq > radio_range[1]*16) {
-                if (freq >= tv_range[0]*16364 && freq <= tv_range[1]*16384) {
-                        /* V4L2_TUNER_CAP_LOW frequency */
-                        if (t->type == TUNER_TEA5767) {
-                                tuner_info("radio freq step 62.5Hz (%d.%06d)\n",(freq>>14),freq%(1<<14)*10000);
-                                t->radio_freq(c,freq>>10);
-                                return;
-                        }
-
-                        tuner_dbg("V4L2_TUNER_CAP_LOW freq selected for Radio. Tuners yet doesn't support converting it to valid freq.\n");
-
-                        tuner_info("radio freq (%d.%06d)\n",(freq>>14),freq%(1<<14)*10000);
-
-                        t->radio_freq(c,freq>>10);
-                        return;
-
-                } else {
-                        tuner_info("radio freq (%d.%02d) out of range (%d-%d)\n",
-                           freq/16,freq%16*100/16,
-                                   radio_range[0],radio_range[1]);
-                        return;
-                }
+        if (freq >= radio_range[0]*16000 && freq <= radio_range[1]*16000) {
+                if (tuner_debug)
+                        tuner_info("radio freq step 62.5Hz (%d.%06d)\n",
+                                            freq/16000,freq%16000*1000/16);
+                t->radio_freq(c,freq);
+        } else {
+                tuner_info("radio freq (%d.%02d) out of range (%d-%d)\n",
+                            freq/16,freq%16*100/16,
+                            radio_range[0],radio_range[1]);
         }
-        tuner_dbg("62.5 Khz freq step selected for Radio.\n");
-        t->radio_freq(c,freq);
+
+        return;
 }
 
 static void set_freq(struct i2c_client *c, unsigned long freq)
@@ -166,8 +133,8 @@ static void set_freq(struct i2c_client *c, unsigned long freq)
 static void set_type(struct i2c_client *c, unsigned int type)
 {
         struct tuner *t = i2c_get_clientdata(c);
+        unsigned char buffer[4];
 
-        tuner_dbg ("I2C addr 0x%02x with type %d\n",c->addr<<1,type);
         /* sanity check */
         if (type == UNSET || type == TUNER_ABSENT)
                 return;
@@ -179,8 +146,8 @@ static void set_type(struct i2c_client *c, unsigned int type)
                 t->type = type;
                 return;
         }
-        if (t->initialized)
-                /* run only once */
+        if ((t->initialized) && (t->type == type))
+                /* run only once except type change  Hac 04/05*/
                 return;
 
         t->initialized = 1;
@@ -193,25 +160,42 @@ static void set_type(struct i2c_client *c, unsigned int type)
         case TUNER_PHILIPS_TDA8290:
                 tda8290_init(c);
                 break;
+        case TUNER_TEA5767:
+                if (tea5767_tuner_init(c)==EINVAL) t->type=TUNER_ABSENT;
+                break;
+        case TUNER_PHILIPS_FMD1216ME_MK3:
+                buffer[0] = 0x0b;
+                buffer[1] = 0xdc;
+                buffer[2] = 0x9c;
+                buffer[3] = 0x60;
+                i2c_master_send(c,buffer,4);
+                mdelay(1);
+                buffer[2] = 0x86;
+                buffer[3] = 0x54;
+                i2c_master_send(c,buffer,4);
+                default_tuner_init(c);
+                break;
         default:
+                /* TEA5767 autodetection code */
+                        if (tea5767_tuner_init(c)!=EINVAL) {
+                                t->type = TUNER_TEA5767;
+                                if (first_tuner == 0x60)
+                                        first_tuner++;
+                                break;
+                        }
+
                 default_tuner_init(c);
                 break;
         }
+        tuner_dbg ("I2C addr 0x%02x with type %d\n",c->addr<<1,type);
 }
 
-#ifdef CONFIG_TUNER_MULTI_I2C
 #define CHECK_ADDR(tp,cmd,tun)  if (client->addr!=tp) { \
-                          return 0; } else \
+                          return 0; } else if (tuner_debug) \
                           tuner_info ("Cmd %s accepted to "tun"\n",cmd);
 #define CHECK_MODE(cmd) if (t->mode == V4L2_TUNER_RADIO) { \
                         CHECK_ADDR(radio_tuner,cmd,"radio") } else \
                         { CHECK_ADDR(tv_tuner,cmd,"TV"); }
-#else
-#define CHECK_ADDR(tp,cmd,tun) tuner_info ("Cmd %s accepted to "tun"\n",cmd);
-#define CHECK_MODE(cmd) tuner_info ("Cmd %s accepted\n",cmd);
-#endif
-
-#ifdef CONFIG_TUNER_MULTI_I2C
 
 static void set_addr(struct i2c_client *c, struct tuner_addr *tun_addr)
 {
@@ -242,9 +226,6 @@ static void set_addr(struct i2c_client *c, struct tuner_addr *tun_addr)
         }
         set_type(c,tun_addr->type);
 }
-#else
-#define set_addr(c,tun_addr) set_type(c,(tun_addr)->type)
-#endif
 
 static char pal[] = "-";
 module_param_string(pal, pal, sizeof(pal), 0644);
@@ -284,17 +265,12 @@ static int tuner_attach(struct i2c_adapter *adap, int addr, int kind)
 {
         struct tuner *t;
 
-#ifndef CONFIG_TUNER_MULTI_I2C
-        if (this_adap > 0)
-                return -1;
-#else
         /* by default, first I2C card is both tv and radio tuner */
         if (this_adap == 0) {
                 first_tuner = addr;
                 tv_tuner = addr;
                 radio_tuner = addr;
         }
-#endif
         this_adap++;
 
         client_template.adapter = adap;
@@ -308,6 +284,7 @@ static int tuner_attach(struct i2c_adapter *adap, int addr, int kind)
         i2c_set_clientdata(&t->i2c, t);
         t->type       = UNSET;
         t->radio_if2  = 10700*1000; /* 10.7MHz - FM radio */
+        t->audmode    = V4L2_TUNER_MODE_STEREO;
 
         i2c_attach_client(&t->i2c);
         tuner_info("chip found @ 0x%x (%s)\n",
@@ -325,11 +302,9 @@ static int tuner_probe(struct i2c_adapter *adap)
         }
         this_adap = 0;
 
-#ifdef CONFIG_TUNER_MULTI_I2C
         first_tuner = 0;
         tv_tuner = 0;
         radio_tuner = 0;
-#endif
 
         if (adap->class & I2C_CLASS_TV_ANALOG)
                 return i2c_probe(adap, &addr_data, tuner_attach);
@@ -392,8 +367,7 @@ tuner_command(struct i2c_client *client, unsigned int cmd, void *arg)
                         t->radio_if2 = 41300 * 1000;
                         break;
                 }
-                break;
-
+                break;
         /* --- v4l ioctls --- */
         /* take care: bttv does userspace copying, we'll get a
            kernel pointer here... */
@@ -440,11 +414,18 @@ tuner_command(struct i2c_client *client, unsigned int cmd, void *arg)
                                 vt->signal = t->has_signal(client);
                         if (t->is_stereo) {
                                 if (t->is_stereo(client))
-                                        vt-> flags |= VIDEO_TUNER_STEREO_ON;
+                                        vt->flags |= VIDEO_TUNER_STEREO_ON;
                                 else
-                                        vt-> flags &= 0xffff ^ VIDEO_TUNER_STEREO_ON;
+                                        vt->flags &= ~VIDEO_TUNER_STEREO_ON;
                         }
                         vt->flags |= V4L2_TUNER_CAP_LOW; /* Allow freqs at 62.5 Hz */
+
+                        vt->rangelow = radio_range[0] * 16000;
+                        vt->rangehigh = radio_range[1] * 16000;
+
+                } else {
+                        vt->rangelow = tv_range[0] * 16;
+                        vt->rangehigh = tv_range[1] * 16;
                 }
 
                 return 0;
@@ -510,20 +491,46 @@ tuner_command(struct i2c_client *client, unsigned int cmd, void *arg)
                                 tuner -> signal = t->has_signal(client);
                         if (t->is_stereo) {
                                 if (t->is_stereo(client)) {
-                                        tuner -> capability |= V4L2_TUNER_CAP_STEREO;
-                                        tuner -> rxsubchans |= V4L2_TUNER_SUB_STEREO;
+                                        tuner -> rxsubchans = V4L2_TUNER_SUB_STEREO | V4L2_TUNER_SUB_MONO;
                                 } else {
-                                        tuner -> rxsubchans &= 0xffff ^ V4L2_TUNER_SUB_STEREO;
+                                        tuner -> rxsubchans = V4L2_TUNER_SUB_MONO;
                                 }
                         }
+                        tuner->capability |= V4L2_TUNER_CAP_LOW | V4L2_TUNER_CAP_STEREO;
+                        tuner->audmode = t->audmode;
+
+                        tuner->rangelow = radio_range[0] * 16000;
+                        tuner->rangehigh = radio_range[1] * 16000;
+                } else {
+                        tuner->rangelow = tv_range[0] * 16;
+                        tuner->rangehigh = tv_range[1] * 16;
                 }
-                /* Wow to deal with V4L2_TUNER_CAP_LOW ? For now, it accepts from low at 62.5KHz step  to high at 62.5 Hz */
-                tuner->rangelow = tv_range[0] * 16;
-//              tuner->rangehigh = tv_range[1] * 16;
-//              tuner->rangelow = tv_range[0] * 16384;
-                tuner->rangehigh = tv_range[1] * 16384;
                 break;
         }
+        case VIDIOC_S_TUNER: /* Allow changing radio range and audio mode */
+        {
+                struct v4l2_tuner *tuner = arg;
+
+                CHECK_ADDR(radio_tuner,"VIDIOC_S_TUNER","radio");
+                SWITCH_V4L2;
+
+                /* To switch the audio mode, applications initialize the
+                   index and audmode fields and the reserved array and
+                   call the VIDIOC_S_TUNER ioctl. */
+                /* rxsubchannels: V4L2_TUNER_MODE_MONO, V4L2_TUNER_MODE_STEREO,
+                   V4L2_TUNER_MODE_LANG1, V4L2_TUNER_MODE_LANG2,
+                   V4L2_TUNER_MODE_SAP */
+
+                if (tuner->audmode == V4L2_TUNER_MODE_MONO)
+                        t->audmode = V4L2_TUNER_MODE_MONO;
+                else
+                        t->audmode = V4L2_TUNER_MODE_STEREO;
+
+                set_radio_freq(client, t->freq);
+                break;
+        }
+        case TDA9887_SET_CONFIG: /* Nothing to do on tuner-core */
+                break;
         default:
                 tuner_dbg ("Unimplemented IOCTL 0x%08x called to tuner.\n", cmd);
                 /* nothing */
diff --git a/drivers/media/video/tuner-simple.c b/drivers/media/video/tuner-simple.c
index 539f30557317..c39ed6226ee0 100644
--- a/drivers/media/video/tuner-simple.c
+++ b/drivers/media/video/tuner-simple.c
@@ -1,5 +1,5 @@
 /*
- * $Id: tuner-simple.c,v 1.21 2005/06/10 19:53:26 nsh Exp $
+ * $Id: tuner-simple.c,v 1.31 2005/06/21 16:02:25 mkrufky Exp $
  *
  * i2c tv tuner chip device driver
  * controls all those simple 4-control-bytes style tuners.
@@ -207,28 +207,27 @@ static struct tunertype tuners[] = {
         { "LG PAL (TAPE series)", LGINNOTEK, PAL,
           16*170.00, 16*450.00, 0x01,0x02,0x08,0xce,623},
 
-        { "Philips PAL/SECAM multi (FQ1216AME MK4)", Philips, PAL,
-          16*160.00,16*442.00,0x01,0x02,0x04,0xce,623 },
-        { "Philips FQ1236A MK4", Philips, NTSC,
-          16*160.00,16*442.00,0x01,0x02,0x04,0x8e,732 },
+        { "Philips PAL/SECAM multi (FQ1216AME MK4)", Philips, PAL,
+          16*160.00,16*442.00,0x01,0x02,0x04,0xce,623 },
+        { "Philips FQ1236A MK4", Philips, NTSC,
+          16*160.00,16*442.00,0x01,0x02,0x04,0x8e,732 },
 
         /* Should work for TVF8531MF, TVF8831MF, TVF8731MF */
         { "Ymec TVision TVF-8531MF", Philips, NTSC,
           16*160.00,16*454.00,0xa0,0x90,0x30,0x8e,732},
         { "Ymec TVision TVF-5533MF", Philips, NTSC,
           16*160.00,16*454.00,0x01,0x02,0x04,0x8e,732},
-
         { "Thomson DDT 7611 (ATSC/NTSC)", THOMSON, ATSC,
           16*157.25,16*454.00,0x39,0x3a,0x3c,0x8e,732},
-        { "Tena TNF9533-D/IF", LGINNOTEK, PAL,
-          16*160.25, 16*464.25, 0x01,0x02,0x08,0x8e,623},
+        /* Should work for TNF9533-D/IF, TNF9533-B/DF */
+        { "Tena TNF9533-D/IF", Philips, PAL,
+          16*160.25,16*464.25,0x01,0x02,0x04,0x8e,623},
 
-        /*
-         * This entry is for TEA5767 FM radio only chip used on several boards
-         * w/TV tuner
-         */
+        /* This entry is for TEA5767 FM radio only chip used on several boards w/TV tuner */
         { TEA5767_TUNER_NAME, Philips, RADIO,
-          -1, -1, 0, 0, 0, TEA5767_LOW_LO_32768,0},
+          -1, -1, 0, 0, 0, TEA5767_LOW_LO_32768,0},
+        { "Philips FMD1216ME MK3 Hybrid Tuner", Philips, PAL,
+          16*160.00,16*442.00,0x51,0x52,0x54,0x86,623 },
 };
 
 unsigned const int tuner_count = ARRAY_SIZE(tuners);
@@ -455,24 +454,24 @@ static void default_set_radio_freq(struct i2c_client *c, unsigned int freq)
         int rc;
 
         tun=&tuners[t->type];
-        div = freq + (int)(16*10.7);
+        div = (freq / 1000) + (int)(16*10.7);
         buffer[2] = tun->config;
 
         switch (t->type) {
         case TUNER_TENA_9533_DI:
         case TUNER_YMEC_TVF_5533MF:
-
                 /*These values are empirically determinated */
-                div = (freq*122)/16 - 20;
+                div = (freq * 122) / 16000 - 20;
                 buffer[2] = 0x88; /* could be also 0x80 */
                 buffer[3] = 0x19; /* could be also 0x10, 0x18, 0x99 */
                 break;
         case TUNER_PHILIPS_FM1216ME_MK3:
         case TUNER_PHILIPS_FM1236_MK3:
+        case TUNER_PHILIPS_FMD1216ME_MK3:
                 buffer[3] = 0x19;
                 break;
         case TUNER_PHILIPS_FM1256_IH3:
-                div = (20 * freq)/16 + 333 * 2;
+                div = (20 * freq) / 16000 + 333 * 2;
                 buffer[2] = 0x80;
                 buffer[3] = 0x19;
                 break;
@@ -505,6 +504,7 @@ int default_tuner_init(struct i2c_client *c)
         t->radio_freq = default_set_radio_freq;
         t->has_signal = tuner_signal;
         t->is_stereo  = tuner_stereo;
+
         return 0;
 }
 
diff --git a/include/media/tuner.h b/include/media/tuner.h
index 2dd8310901e8..4794c5632360 100644
--- a/include/media/tuner.h
+++ b/include/media/tuner.h
@@ -1,5 +1,6 @@
 
-/*
+/* $Id: tuner.h,v 1.33 2005/06/21 14:58:08 mkrufky Exp $
+ *
     tuner.h - definition for different tuners
 
     Copyright (C) 1997 Markus Schroeder (schroedm@uni-duesseldorf.de)
@@ -23,6 +24,8 @@
 #ifndef _TUNER_H
 #define _TUNER_H
 
+#include <linux/videodev2.h>
+
 #include "id.h"
 
 #define ADDR_UNSET (255)
@@ -88,7 +91,7 @@
 #define TUNER_LG_NTSC_TAPE       47
 
 #define TUNER_TNF_8831BGFF       48
-#define TUNER_MICROTUNE_4042FI5  49     /* FusionHDTV 3 Gold - 4042 FI5 (3X 8147) */
+#define TUNER_MICROTUNE_4042FI5  49     /* DViCO FusionHDTV 3 Gold-Q - 4042 FI5 (3X 8147) */
 #define TUNER_TCL_2002N          50
 #define TUNER_PHILIPS_FM1256_IH3   51
 
@@ -98,18 +101,18 @@
 #define TUNER_LG_PAL_TAPE        55    /* Hauppauge PVR-150 PAL */
 
 #define TUNER_PHILIPS_FQ1216AME_MK4 56 /* Hauppauge PVR-150 PAL */
-#define TUNER_PHILIPS_FQ1236A_MK4 57   /* Hauppauge PVR-500MCE NTSC */
+#define TUNER_PHILIPS_FQ1236A_MK4   57   /* Hauppauge PVR-500MCE NTSC */
 
 #define TUNER_YMEC_TVF_8531MF 58
 #define TUNER_YMEC_TVF_5533MF 59        /* Pixelview Pro Ultra NTSC */
-#define TUNER_THOMSON_DTT7611 60
+#define TUNER_THOMSON_DTT7611 60        /* DViCO FusionHDTV 3 Gold-T */
 #define TUNER_TENA_9533_DI    61
+
 #define TUNER_TEA5767         62        /* Only FM Radio Tuner */
+#define TUNER_PHILIPS_FMD1216ME_MK3 63
 
 #define TEA5767_TUNER_NAME "Philips TEA5767HN FM Radio"
 
-#define TUNER_THOMSON_DTT7611    60
-
 #define NOTUNER 0
 #define PAL     1       /* PAL_BG */
 #define PAL_I   2
@@ -194,11 +197,15 @@ struct tuner {
         unsigned char i2c_easy_mode[2];
         unsigned char i2c_set_freq[8];
 
+        /* used to keep track of audmode */
+        unsigned int audmode;
+
         /* function ptrs */
         void (*tv_freq)(struct i2c_client *c, unsigned int freq);
         void (*radio_freq)(struct i2c_client *c, unsigned int freq);
         int  (*has_signal)(struct i2c_client *c);
         int  (*is_stereo)(struct i2c_client *c);
+        int  (*set_tuner)(struct i2c_client *c, struct v4l2_tuner *v);
 };
 
 extern unsigned int tuner_debug;
@@ -206,6 +213,7 @@ extern unsigned const int tuner_count;
 
 extern int microtune_init(struct i2c_client *c);
 extern int tda8290_init(struct i2c_client *c);
+extern int tea5767_tuner_init(struct i2c_client *c);
 extern int default_tuner_init(struct i2c_client *c);
 
 #define tuner_warn(fmt, arg...) \