aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--Documentation/watchdog/src/watchdog-simple.c2
-rw-r--r--arch/arm/configs/at91rm9200dk_defconfig2
-rw-r--r--arch/arm/configs/at91rm9200ek_defconfig2
-rw-r--r--arch/arm/configs/csb337_defconfig2
-rw-r--r--arch/arm/configs/csb637_defconfig2
-rw-r--r--arch/arm/configs/kafa_defconfig2
-rw-r--r--arch/arm/configs/onearm_defconfig2
-rw-r--r--drivers/char/watchdog/Kconfig65
-rw-r--r--drivers/char/watchdog/Makefile4
-rw-r--r--drivers/char/watchdog/at91rm9200_wdt.c (renamed from drivers/char/watchdog/at91_wdt.c)0
-rw-r--r--drivers/char/watchdog/iTCO_wdt.c21
-rw-r--r--drivers/char/watchdog/s3c2410_wdt.c5
-rw-r--r--drivers/char/watchdog/smsc37b787_wdt.c627
-rw-r--r--drivers/char/watchdog/w83627hf_wdt.c8
-rw-r--r--drivers/char/watchdog/w83697hf_wdt.c450
15 files changed, 1170 insertions, 24 deletions
diff --git a/Documentation/watchdog/src/watchdog-simple.c b/Documentation/watchdog/src/watchdog-simple.c
index 85cf17c48669..47801bc7e742 100644
--- a/Documentation/watchdog/src/watchdog-simple.c
+++ b/Documentation/watchdog/src/watchdog-simple.c
@@ -1,4 +1,6 @@
1#include <stdio.h>
1#include <stdlib.h> 2#include <stdlib.h>
3#include <unistd.h>
2#include <fcntl.h> 4#include <fcntl.h>
3 5
4int main(int argc, const char *argv[]) { 6int main(int argc, const char *argv[]) {
diff --git a/arch/arm/configs/at91rm9200dk_defconfig b/arch/arm/configs/at91rm9200dk_defconfig
index c82e4667f45e..b43041476e02 100644
--- a/arch/arm/configs/at91rm9200dk_defconfig
+++ b/arch/arm/configs/at91rm9200dk_defconfig
@@ -577,7 +577,7 @@ CONFIG_WATCHDOG_NOWAYOUT=y
577# Watchdog Device Drivers 577# Watchdog Device Drivers
578# 578#
579# CONFIG_SOFT_WATCHDOG is not set 579# CONFIG_SOFT_WATCHDOG is not set
580CONFIG_AT91_WATCHDOG=y 580CONFIG_AT91RM9200_WATCHDOG=y
581 581
582# 582#
583# USB-based Watchdog Cards 583# USB-based Watchdog Cards
diff --git a/arch/arm/configs/at91rm9200ek_defconfig b/arch/arm/configs/at91rm9200ek_defconfig
index b983fc59aa42..d96fc8386e2f 100644
--- a/arch/arm/configs/at91rm9200ek_defconfig
+++ b/arch/arm/configs/at91rm9200ek_defconfig
@@ -558,7 +558,7 @@ CONFIG_WATCHDOG_NOWAYOUT=y
558# Watchdog Device Drivers 558# Watchdog Device Drivers
559# 559#
560# CONFIG_SOFT_WATCHDOG is not set 560# CONFIG_SOFT_WATCHDOG is not set
561CONFIG_AT91_WATCHDOG=y 561CONFIG_AT91RM9200_WATCHDOG=y
562 562
563# 563#
564# USB-based Watchdog Cards 564# USB-based Watchdog Cards
diff --git a/arch/arm/configs/csb337_defconfig b/arch/arm/configs/csb337_defconfig
index a2d6fd398f16..20e68250d835 100644
--- a/arch/arm/configs/csb337_defconfig
+++ b/arch/arm/configs/csb337_defconfig
@@ -615,7 +615,7 @@ CONFIG_WATCHDOG_NOWAYOUT=y
615# Watchdog Device Drivers 615# Watchdog Device Drivers
616# 616#
617# CONFIG_SOFT_WATCHDOG is not set 617# CONFIG_SOFT_WATCHDOG is not set
618CONFIG_AT91_WATCHDOG=y 618CONFIG_AT91RM9200_WATCHDOG=y
619 619
620# 620#
621# USB-based Watchdog Cards 621# USB-based Watchdog Cards
diff --git a/arch/arm/configs/csb637_defconfig b/arch/arm/configs/csb637_defconfig
index 2a1ac6c60abc..df8595ac031f 100644
--- a/arch/arm/configs/csb637_defconfig
+++ b/arch/arm/configs/csb637_defconfig
@@ -615,7 +615,7 @@ CONFIG_WATCHDOG_NOWAYOUT=y
615# Watchdog Device Drivers 615# Watchdog Device Drivers
616# 616#
617# CONFIG_SOFT_WATCHDOG is not set 617# CONFIG_SOFT_WATCHDOG is not set
618CONFIG_AT91_WATCHDOG=y 618CONFIG_AT91RM9200_WATCHDOG=y
619 619
620# 620#
621# USB-based Watchdog Cards 621# USB-based Watchdog Cards
diff --git a/arch/arm/configs/kafa_defconfig b/arch/arm/configs/kafa_defconfig
index 54fcd75779da..a4cdafc1548a 100644
--- a/arch/arm/configs/kafa_defconfig
+++ b/arch/arm/configs/kafa_defconfig
@@ -560,7 +560,7 @@ CONFIG_WATCHDOG_NOWAYOUT=y
560# Watchdog Device Drivers 560# Watchdog Device Drivers
561# 561#
562# CONFIG_SOFT_WATCHDOG is not set 562# CONFIG_SOFT_WATCHDOG is not set
563CONFIG_AT91_WATCHDOG=y 563CONFIG_AT91RM9200_WATCHDOG=y
564# CONFIG_NVRAM is not set 564# CONFIG_NVRAM is not set
565# CONFIG_DTLK is not set 565# CONFIG_DTLK is not set
566# CONFIG_R3964 is not set 566# CONFIG_R3964 is not set
diff --git a/arch/arm/configs/onearm_defconfig b/arch/arm/configs/onearm_defconfig
index cb1d94f9049e..9b9f2155af35 100644
--- a/arch/arm/configs/onearm_defconfig
+++ b/arch/arm/configs/onearm_defconfig
@@ -607,7 +607,7 @@ CONFIG_WATCHDOG_NOWAYOUT=y
607# Watchdog Device Drivers 607# Watchdog Device Drivers
608# 608#
609# CONFIG_SOFT_WATCHDOG is not set 609# CONFIG_SOFT_WATCHDOG is not set
610CONFIG_AT91_WATCHDOG=y 610CONFIG_AT91RM9200_WATCHDOG=y
611 611
612# 612#
613# USB-based Watchdog Cards 613# USB-based Watchdog Cards
diff --git a/drivers/char/watchdog/Kconfig b/drivers/char/watchdog/Kconfig
index 89e46d6dfc4e..0187b1185323 100644
--- a/drivers/char/watchdog/Kconfig
+++ b/drivers/char/watchdog/Kconfig
@@ -13,7 +13,7 @@ config WATCHDOG
13 subsequently opening the file and then failing to write to it for 13 subsequently opening the file and then failing to write to it for
14 longer than 1 minute will result in rebooting the machine. This 14 longer than 1 minute will result in rebooting the machine. This
15 could be useful for a networked machine that needs to come back 15 could be useful for a networked machine that needs to come back
16 online as fast as possible after a lock-up. There's both a watchdog 16 on-line as fast as possible after a lock-up. There's both a watchdog
17 implementation entirely in software (which can sometimes fail to 17 implementation entirely in software (which can sometimes fail to
18 reboot the machine) and a driver for hardware watchdog boards, which 18 reboot the machine) and a driver for hardware watchdog boards, which
19 are more robust and can also keep track of the temperature inside 19 are more robust and can also keep track of the temperature inside
@@ -60,7 +60,7 @@ config SOFT_WATCHDOG
60 60
61# ARM Architecture 61# ARM Architecture
62 62
63config AT91_WATCHDOG 63config AT91RM9200_WATCHDOG
64 tristate "AT91RM9200 watchdog" 64 tristate "AT91RM9200 watchdog"
65 depends on WATCHDOG && ARCH_AT91RM9200 65 depends on WATCHDOG && ARCH_AT91RM9200
66 help 66 help
@@ -71,7 +71,7 @@ config 21285_WATCHDOG
71 tristate "DC21285 watchdog" 71 tristate "DC21285 watchdog"
72 depends on WATCHDOG && FOOTBRIDGE 72 depends on WATCHDOG && FOOTBRIDGE
73 help 73 help
74 The Intel Footbridge chip contains a builtin watchdog circuit. Say Y 74 The Intel Footbridge chip contains a built-in watchdog circuit. Say Y
75 here if you wish to use this. Alternatively say M to compile the 75 here if you wish to use this. Alternatively say M to compile the
76 driver as a module, which will be called wdt285. 76 driver as a module, which will be called wdt285.
77 77
@@ -269,11 +269,11 @@ config IB700_WDT
269 Most people will say N. 269 Most people will say N.
270 270
271config IBMASR 271config IBMASR
272 tristate "IBM Automatic Server Restart" 272 tristate "IBM Automatic Server Restart"
273 depends on WATCHDOG && X86 273 depends on WATCHDOG && X86
274 help 274 help
275 This is the driver for the IBM Automatic Server Restart watchdog 275 This is the driver for the IBM Automatic Server Restart watchdog
276 timer builtin into some eServer xSeries machines. 276 timer built-in into some eServer xSeries machines.
277 277
278 To compile this driver as a module, choose M here: the 278 To compile this driver as a module, choose M here: the
279 module will be called ibmasr. 279 module will be called ibmasr.
@@ -316,13 +316,16 @@ config I8XX_TCO
316 To compile this driver as a module, choose M here: the 316 To compile this driver as a module, choose M here: the
317 module will be called i8xx_tco. 317 module will be called i8xx_tco.
318 318
319 Note: This driver will be removed in the near future. Please
320 use the Intel TCO Timer/Watchdog driver.
321
319config ITCO_WDT 322config ITCO_WDT
320 tristate "Intel TCO Timer/Watchdog (EXPERIMENTAL)" 323 tristate "Intel TCO Timer/Watchdog"
321 depends on WATCHDOG && (X86 || IA64) && PCI && EXPERIMENTAL 324 depends on WATCHDOG && (X86 || IA64) && PCI
322 ---help--- 325 ---help---
323 Hardware driver for the intel TCO timer based watchdog devices. 326 Hardware driver for the intel TCO timer based watchdog devices.
324 These drivers are included in the Intel 82801 I/O Controller 327 These drivers are included in the Intel 82801 I/O Controller
325 Hub family 'from ICH0 up to ICH7) and in the Intel 6300ESB 328 Hub family (from ICH0 up to ICH8) and in the Intel 6300ESB
326 controller hub. 329 controller hub.
327 330
328 The TCO (Total Cost of Ownership) timer is a watchdog timer 331 The TCO (Total Cost of Ownership) timer is a watchdog timer
@@ -395,6 +398,26 @@ config CPU5_WDT
395 To compile this driver as a module, choose M here: the 398 To compile this driver as a module, choose M here: the
396 module will be called cpu5wdt. 399 module will be called cpu5wdt.
397 400
401config SMSC37B787_WDT
402 tristate "Winbond SMsC37B787 Watchdog Timer"
403 depends on WATCHDOG && X86
404 ---help---
405 This is the driver for the hardware watchdog component on the
406 Winbond SMsC37B787 chipset as used on the NetRunner Mainboard
407 from Vision Systems and maybe others.
408
409 This watchdog simply watches your kernel to make sure it doesn't
410 freeze, and if it does, it reboots your computer after a certain
411 amount of time.
412
413 Usually a userspace daemon will notify the kernel WDT driver that
414 userspace is still alive, at regular intervals.
415
416 To compile this driver as a module, choose M here: the
417 module will be called smsc37b787_wdt.
418
419 Most people will say N.
420
398config W83627HF_WDT 421config W83627HF_WDT
399 tristate "W83627HF Watchdog Timer" 422 tristate "W83627HF Watchdog Timer"
400 depends on WATCHDOG && X86 423 depends on WATCHDOG && X86
@@ -410,6 +433,21 @@ config W83627HF_WDT
410 433
411 Most people will say N. 434 Most people will say N.
412 435
436config W83697HF_WDT
437 tristate "W83697HF/W83697HG Watchdog Timer"
438 depends on WATCHDOG && X86
439 ---help---
440 This is the driver for the hardware watchdog on the W83697HF/HG
441 chipset as used in Dedibox/VIA motherboards (and likely others).
442 This watchdog simply watches your kernel to make sure it doesn't
443 freeze, and if it does, it reboots your computer after a certain
444 amount of time.
445
446 To compile this driver as a module, choose M here: the
447 module will be called w83697hf_wdt.
448
449 Most people will say N.
450
413config W83877F_WDT 451config W83877F_WDT
414 tristate "W83877F (EMACS) Watchdog Timer" 452 tristate "W83877F (EMACS) Watchdog Timer"
415 depends on WATCHDOG && X86 453 depends on WATCHDOG && X86
@@ -443,7 +481,7 @@ config MACHZ_WDT
443 depends on WATCHDOG && X86 481 depends on WATCHDOG && X86
444 ---help--- 482 ---help---
445 If you are using a ZF Micro MachZ processor, say Y here, otherwise 483 If you are using a ZF Micro MachZ processor, say Y here, otherwise
446 N. This is the driver for the watchdog timer builtin on that 484 N. This is the driver for the watchdog timer built-in on that
447 processor using ZF-Logic interface. This watchdog simply watches 485 processor using ZF-Logic interface. This watchdog simply watches
448 your kernel to make sure it doesn't freeze, and if it does, it 486 your kernel to make sure it doesn't freeze, and if it does, it
449 reboots your computer after a certain amount of time. 487 reboots your computer after a certain amount of time.
@@ -472,7 +510,6 @@ config SBC_EPX_C3_WATCHDOG
472 To compile this driver as a module, choose M here: the 510 To compile this driver as a module, choose M here: the
473 module will be called sbc_epx_c3. 511 module will be called sbc_epx_c3.
474 512
475
476# PowerPC Architecture 513# PowerPC Architecture
477 514
478config 8xx_WDT 515config 8xx_WDT
@@ -502,7 +539,7 @@ config WATCHDOG_RTAS
502 help 539 help
503 This driver adds watchdog support for the RTAS watchdog. 540 This driver adds watchdog support for the RTAS watchdog.
504 541
505 To compile this driver as a module, choose M here. The module 542 To compile this driver as a module, choose M here. The module
506 will be called wdrtas. 543 will be called wdrtas.
507 544
508# MIPS Architecture 545# MIPS Architecture
@@ -556,7 +593,7 @@ config SH_WDT_MMAP
556 help 593 help
557 If you say Y here, user applications will be able to mmap the 594 If you say Y here, user applications will be able to mmap the
558 WDT/CPG registers. 595 WDT/CPG registers.
559# 596
560# SPARC64 Architecture 597# SPARC64 Architecture
561 598
562config WATCHDOG_CP1XXX 599config WATCHDOG_CP1XXX
diff --git a/drivers/char/watchdog/Makefile b/drivers/char/watchdog/Makefile
index 7f70abad465a..36440497047c 100644
--- a/drivers/char/watchdog/Makefile
+++ b/drivers/char/watchdog/Makefile
@@ -23,7 +23,7 @@ obj-$(CONFIG_WDTPCI) += wdt_pci.o
23obj-$(CONFIG_USBPCWATCHDOG) += pcwd_usb.o 23obj-$(CONFIG_USBPCWATCHDOG) += pcwd_usb.o
24 24
25# ARM Architecture 25# ARM Architecture
26obj-$(CONFIG_AT91_WATCHDOG) += at91_wdt.o 26obj-$(CONFIG_AT91RM9200_WATCHDOG) += at91rm9200_wdt.o
27obj-$(CONFIG_OMAP_WATCHDOG) += omap_wdt.o 27obj-$(CONFIG_OMAP_WATCHDOG) += omap_wdt.o
28obj-$(CONFIG_21285_WATCHDOG) += wdt285.o 28obj-$(CONFIG_21285_WATCHDOG) += wdt285.o
29obj-$(CONFIG_977_WATCHDOG) += wdt977.o 29obj-$(CONFIG_977_WATCHDOG) += wdt977.o
@@ -53,7 +53,9 @@ obj-$(CONFIG_SCx200_WDT) += scx200_wdt.o
53obj-$(CONFIG_60XX_WDT) += sbc60xxwdt.o 53obj-$(CONFIG_60XX_WDT) += sbc60xxwdt.o
54obj-$(CONFIG_SBC8360_WDT) += sbc8360.o 54obj-$(CONFIG_SBC8360_WDT) += sbc8360.o
55obj-$(CONFIG_CPU5_WDT) += cpu5wdt.o 55obj-$(CONFIG_CPU5_WDT) += cpu5wdt.o
56obj-$(CONFIG_SMSC37B787_WDT) += smsc37b787_wdt.o
56obj-$(CONFIG_W83627HF_WDT) += w83627hf_wdt.o 57obj-$(CONFIG_W83627HF_WDT) += w83627hf_wdt.o
58obj-$(CONFIG_W83697HF_WDT) += w83697hf_wdt.o
57obj-$(CONFIG_W83877F_WDT) += w83877f_wdt.o 59obj-$(CONFIG_W83877F_WDT) += w83877f_wdt.o
58obj-$(CONFIG_W83977F_WDT) += w83977f_wdt.o 60obj-$(CONFIG_W83977F_WDT) += w83977f_wdt.o
59obj-$(CONFIG_MACHZ_WDT) += machzwd.o 61obj-$(CONFIG_MACHZ_WDT) += machzwd.o
diff --git a/drivers/char/watchdog/at91_wdt.c b/drivers/char/watchdog/at91rm9200_wdt.c
index 4e7a1145e78f..4e7a1145e78f 100644
--- a/drivers/char/watchdog/at91_wdt.c
+++ b/drivers/char/watchdog/at91rm9200_wdt.c
diff --git a/drivers/char/watchdog/iTCO_wdt.c b/drivers/char/watchdog/iTCO_wdt.c
index aaac94db0d8b..b6f29cb8bd39 100644
--- a/drivers/char/watchdog/iTCO_wdt.c
+++ b/drivers/char/watchdog/iTCO_wdt.c
@@ -35,6 +35,10 @@
35 * 82801GDH (ICH7DH) : document number 307013-002, 307014-009, 35 * 82801GDH (ICH7DH) : document number 307013-002, 307014-009,
36 * 82801GBM (ICH7-M) : document number 307013-002, 307014-009, 36 * 82801GBM (ICH7-M) : document number 307013-002, 307014-009,
37 * 82801GHM (ICH7-M DH) : document number 307013-002, 307014-009, 37 * 82801GHM (ICH7-M DH) : document number 307013-002, 307014-009,
38 * 82801HB (ICH8) : document number 313056-002, 313057-004,
39 * 82801HR (ICH8R) : document number 313056-002, 313057-004,
40 * 82801HH (ICH8DH) : document number 313056-002, 313057-004,
41 * 82801HO (ICH8DO) : document number 313056-002, 313057-004,
38 * 6300ESB (6300ESB) : document number 300641-003 42 * 6300ESB (6300ESB) : document number 300641-003
39 */ 43 */
40 44
@@ -45,7 +49,7 @@
45/* Module and version information */ 49/* Module and version information */
46#define DRV_NAME "iTCO_wdt" 50#define DRV_NAME "iTCO_wdt"
47#define DRV_VERSION "1.00" 51#define DRV_VERSION "1.00"
48#define DRV_RELDATE "30-Jul-2006" 52#define DRV_RELDATE "08-Oct-2006"
49#define PFX DRV_NAME ": " 53#define PFX DRV_NAME ": "
50 54
51/* Includes */ 55/* Includes */
@@ -85,6 +89,9 @@ enum iTCO_chipsets {
85 TCO_ICH7, /* ICH7 & ICH7R */ 89 TCO_ICH7, /* ICH7 & ICH7R */
86 TCO_ICH7M, /* ICH7-M */ 90 TCO_ICH7M, /* ICH7-M */
87 TCO_ICH7MDH, /* ICH7-M DH */ 91 TCO_ICH7MDH, /* ICH7-M DH */
92 TCO_ICH8, /* ICH8 & ICH8R */
93 TCO_ICH8DH, /* ICH8DH */
94 TCO_ICH8DO, /* ICH8DO */
88}; 95};
89 96
90static struct { 97static struct {
@@ -108,6 +115,9 @@ static struct {
108 {"ICH7 or ICH7R", 2}, 115 {"ICH7 or ICH7R", 2},
109 {"ICH7-M", 2}, 116 {"ICH7-M", 2},
110 {"ICH7-M DH", 2}, 117 {"ICH7-M DH", 2},
118 {"ICH8 or ICH8R", 2},
119 {"ICH8DH", 2},
120 {"ICH8DO", 2},
111 {NULL,0} 121 {NULL,0}
112}; 122};
113 123
@@ -135,6 +145,9 @@ static struct pci_device_id iTCO_wdt_pci_tbl[] = {
135 { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH7 }, 145 { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH7 },
136 { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH7M }, 146 { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH7M },
137 { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_31, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH7MDH }, 147 { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_31, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH7MDH },
148 { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH8 },
149 { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_2, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH8DH },
150 { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_3, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH8DO },
138 { 0, }, /* End of list */ 151 { 0, }, /* End of list */
139}; 152};
140MODULE_DEVICE_TABLE (pci, iTCO_wdt_pci_tbl); 153MODULE_DEVICE_TABLE (pci, iTCO_wdt_pci_tbl);
@@ -355,7 +368,8 @@ static int iTCO_wdt_get_timeleft (int *time_left)
355 spin_unlock(&iTCO_wdt_private.io_lock); 368 spin_unlock(&iTCO_wdt_private.io_lock);
356 369
357 *time_left = (val8 * 6) / 10; 370 *time_left = (val8 * 6) / 10;
358 } 371 } else
372 return -EINVAL;
359 return 0; 373 return 0;
360} 374}
361 375
@@ -426,7 +440,6 @@ static int iTCO_wdt_ioctl (struct inode *inode, struct file *file,
426{ 440{
427 int new_options, retval = -EINVAL; 441 int new_options, retval = -EINVAL;
428 int new_heartbeat; 442 int new_heartbeat;
429 int time_left;
430 void __user *argp = (void __user *)arg; 443 void __user *argp = (void __user *)arg;
431 int __user *p = argp; 444 int __user *p = argp;
432 static struct watchdog_info ident = { 445 static struct watchdog_info ident = {
@@ -486,6 +499,8 @@ static int iTCO_wdt_ioctl (struct inode *inode, struct file *file,
486 499
487 case WDIOC_GETTIMELEFT: 500 case WDIOC_GETTIMELEFT:
488 { 501 {
502 int time_left;
503
489 if (iTCO_wdt_get_timeleft(&time_left)) 504 if (iTCO_wdt_get_timeleft(&time_left))
490 return -EINVAL; 505 return -EINVAL;
491 506
diff --git a/drivers/char/watchdog/s3c2410_wdt.c b/drivers/char/watchdog/s3c2410_wdt.c
index 68b1ca976d53..18cb050c3862 100644
--- a/drivers/char/watchdog/s3c2410_wdt.c
+++ b/drivers/char/watchdog/s3c2410_wdt.c
@@ -380,18 +380,21 @@ static int s3c2410wdt_probe(struct platform_device *pdev)
380 res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); 380 res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
381 if (res == NULL) { 381 if (res == NULL) {
382 printk(KERN_INFO PFX "failed to get irq resource\n"); 382 printk(KERN_INFO PFX "failed to get irq resource\n");
383 iounmap(wdt_base);
383 return -ENOENT; 384 return -ENOENT;
384 } 385 }
385 386
386 ret = request_irq(res->start, s3c2410wdt_irq, 0, pdev->name, pdev); 387 ret = request_irq(res->start, s3c2410wdt_irq, 0, pdev->name, pdev);
387 if (ret != 0) { 388 if (ret != 0) {
388 printk(KERN_INFO PFX "failed to install irq (%d)\n", ret); 389 printk(KERN_INFO PFX "failed to install irq (%d)\n", ret);
390 iounmap(wdt_base);
389 return ret; 391 return ret;
390 } 392 }
391 393
392 wdt_clock = clk_get(&pdev->dev, "watchdog"); 394 wdt_clock = clk_get(&pdev->dev, "watchdog");
393 if (wdt_clock == NULL) { 395 if (wdt_clock == NULL) {
394 printk(KERN_INFO PFX "failed to find watchdog clock source\n"); 396 printk(KERN_INFO PFX "failed to find watchdog clock source\n");
397 iounmap(wdt_base);
395 return -ENOENT; 398 return -ENOENT;
396 } 399 }
397 400
@@ -415,6 +418,7 @@ static int s3c2410wdt_probe(struct platform_device *pdev)
415 if (ret) { 418 if (ret) {
416 printk (KERN_ERR PFX "cannot register miscdev on minor=%d (%d)\n", 419 printk (KERN_ERR PFX "cannot register miscdev on minor=%d (%d)\n",
417 WATCHDOG_MINOR, ret); 420 WATCHDOG_MINOR, ret);
421 iounmap(wdt_base);
418 return ret; 422 return ret;
419 } 423 }
420 424
@@ -451,6 +455,7 @@ static int s3c2410wdt_remove(struct platform_device *dev)
451 wdt_clock = NULL; 455 wdt_clock = NULL;
452 } 456 }
453 457
458 iounmap(wdt_base);
454 misc_deregister(&s3c2410wdt_miscdev); 459 misc_deregister(&s3c2410wdt_miscdev);
455 return 0; 460 return 0;
456} 461}
diff --git a/drivers/char/watchdog/smsc37b787_wdt.c b/drivers/char/watchdog/smsc37b787_wdt.c
new file mode 100644
index 000000000000..9f56913b484f
--- /dev/null
+++ b/drivers/char/watchdog/smsc37b787_wdt.c
@@ -0,0 +1,627 @@
1/*
2 * SMsC 37B787 Watchdog Timer driver for Linux 2.6.x.x
3 *
4 * Based on acquirewdt.c by Alan Cox <alan@redhat.com>
5 * and some other existing drivers
6 *
7 * This program is free software; you can redistribute it and/or
8 * modify it under the terms of the GNU General Public License
9 * as published by the Free Software Foundation; either version
10 * 2 of the License, or (at your option) any later version.
11 *
12 * The authors do NOT admit liability nor provide warranty for
13 * any of this software. This material is provided "AS-IS" in
14 * the hope that it may be useful for others.
15 *
16 * (C) Copyright 2003-2006 Sven Anders <anders@anduras.de>
17 *
18 * History:
19 * 2003 - Created version 1.0 for Linux 2.4.x.
20 * 2006 - Ported to Linux 2.6, added nowayout and MAGICCLOSE
21 * features. Released version 1.1
22 *
23 * Theory of operation:
24 *
25 * A Watchdog Timer (WDT) is a hardware circuit that can
26 * reset the computer system in case of a software fault.
27 * You probably knew that already.
28 *
29 * Usually a userspace daemon will notify the kernel WDT driver
30 * via the /dev/watchdog special device file that userspace is
31 * still alive, at regular intervals. When such a notification
32 * occurs, the driver will usually tell the hardware watchdog
33 * that everything is in order, and that the watchdog should wait
34 * for yet another little while to reset the system.
35 * If userspace fails (RAM error, kernel bug, whatever), the
36 * notifications cease to occur, and the hardware watchdog will
37 * reset the system (causing a reboot) after the timeout occurs.
38 *
39 * Create device with:
40 * mknod /dev/watchdog c 10 130
41 *
42 * For an example userspace keep-alive daemon, see:
43 * Documentation/watchdog/watchdog.txt
44 */
45
46#include <linux/module.h>
47#include <linux/moduleparam.h>
48#include <linux/types.h>
49#include <linux/miscdevice.h>
50#include <linux/watchdog.h>
51#include <linux/delay.h>
52#include <linux/fs.h>
53#include <linux/ioport.h>
54#include <linux/notifier.h>
55#include <linux/reboot.h>
56#include <linux/init.h>
57#include <linux/spinlock.h>
58
59#include <asm/io.h>
60#include <asm/uaccess.h>
61#include <asm/system.h>
62
63/* enable support for minutes as units? */
64/* (does not always work correctly, so disabled by default!) */
65#define SMSC_SUPPORT_MINUTES
66#undef SMSC_SUPPORT_MINUTES
67
68#define MAX_TIMEOUT 255
69
70#define UNIT_SECOND 0
71#define UNIT_MINUTE 1
72
73#define MODNAME "smsc37b787_wdt: "
74#define VERSION "1.1"
75
76#define IOPORT 0x3F0
77#define IOPORT_SIZE 2
78#define IODEV_NO 8
79
80static int unit = UNIT_SECOND; /* timer's unit */
81static int timeout = 60; /* timeout value: default is 60 "units" */
82static unsigned long timer_enabled = 0; /* is the timer enabled? */
83
84static char expect_close; /* is the close expected? */
85
86static spinlock_t io_lock; /* to guard the watchdog from io races */
87
88static int nowayout = WATCHDOG_NOWAYOUT;
89
90/* -- Low level function ----------------------------------------*/
91
92/* unlock the IO chip */
93
94static inline void open_io_config(void)
95{
96 outb(0x55, IOPORT);
97 mdelay(1);
98 outb(0x55, IOPORT);
99}
100
101/* lock the IO chip */
102static inline void close_io_config(void)
103{
104 outb(0xAA, IOPORT);
105}
106
107/* select the IO device */
108static inline void select_io_device(unsigned char devno)
109{
110 outb(0x07, IOPORT);
111 outb(devno, IOPORT+1);
112}
113
114/* write to the control register */
115static inline void write_io_cr(unsigned char reg, unsigned char data)
116{
117 outb(reg, IOPORT);
118 outb(data, IOPORT+1);
119}
120
121/* read from the control register */
122static inline char read_io_cr(unsigned char reg)
123{
124 outb(reg, IOPORT);
125 return inb(IOPORT+1);
126}
127
128/* -- Medium level functions ------------------------------------*/
129
130static inline void gpio_bit12(unsigned char reg)
131{
132 // -- General Purpose I/O Bit 1.2 --
133 // Bit 0, In/Out: 0 = Output, 1 = Input
134 // Bit 1, Polarity: 0 = No Invert, 1 = Invert
135 // Bit 2, Group Enable Intr.: 0 = Disable, 1 = Enable
136 // Bit 3/4, Function select: 00 = GPI/O, 01 = WDT, 10 = P17,
137 // 11 = Either Edge Triggered Intr. 2
138 // Bit 5/6 (Reserved)
139 // Bit 7, Output Type: 0 = Push Pull Bit, 1 = Open Drain
140 write_io_cr(0xE2, reg);
141}
142
143static inline void gpio_bit13(unsigned char reg)
144{
145 // -- General Purpose I/O Bit 1.3 --
146 // Bit 0, In/Out: 0 = Output, 1 = Input
147 // Bit 1, Polarity: 0 = No Invert, 1 = Invert
148 // Bit 2, Group Enable Intr.: 0 = Disable, 1 = Enable
149 // Bit 3, Function select: 0 = GPI/O, 1 = LED
150 // Bit 4-6 (Reserved)
151 // Bit 7, Output Type: 0 = Push Pull Bit, 1 = Open Drain
152 write_io_cr(0xE3, reg);
153}
154
155static inline void wdt_timer_units(unsigned char new_units)
156{
157 // -- Watchdog timer units --
158 // Bit 0-6 (Reserved)
159 // Bit 7, WDT Time-out Value Units Select
160 // (0 = Minutes, 1 = Seconds)
161 write_io_cr(0xF1, new_units);
162}
163
164static inline void wdt_timeout_value(unsigned char new_timeout)
165{
166 // -- Watchdog Timer Time-out Value --
167 // Bit 0-7 Binary coded units (0=Disabled, 1..255)
168 write_io_cr(0xF2, new_timeout);
169}
170
171static inline void wdt_timer_conf(unsigned char conf)
172{
173 // -- Watchdog timer configuration --
174 // Bit 0 Joystick enable: 0* = No Reset, 1 = Reset WDT upon Gameport I/O
175 // Bit 1 Keyboard enable: 0* = No Reset, 1 = Reset WDT upon KBD Intr.
176 // Bit 2 Mouse enable: 0* = No Reset, 1 = Reset WDT upon Mouse Intr.
177 // Bit 3 Reset the timer
178 // (Wrong in SMsC documentation? Given as: PowerLED Timout Enabled)
179 // Bit 4-7 WDT Interrupt Mapping: (0000* = Disabled,
180 // 0001=IRQ1, 0010=(Invalid), 0011=IRQ3 to 1111=IRQ15)
181 write_io_cr(0xF3, conf);
182}
183
184static inline void wdt_timer_ctrl(unsigned char reg)
185{
186 // -- Watchdog timer control --
187 // Bit 0 Status Bit: 0 = Timer counting, 1 = Timeout occured
188 // Bit 1 Power LED Toggle: 0 = Disable Toggle, 1 = Toggle at 1 Hz
189 // Bit 2 Force Timeout: 1 = Forces WD timeout event (self-cleaning)
190 // Bit 3 P20 Force Timeout enabled:
191 // 0 = P20 activity does not generate the WD timeout event
192 // 1 = P20 Allows rising edge of P20, from the keyboard
193 // controller, to force the WD timeout event.
194 // Bit 4 (Reserved)
195 // -- Soft power management --
196 // Bit 5 Stop Counter: 1 = Stop software power down counter
197 // set via register 0xB8, (self-cleaning)
198 // (Upon read: 0 = Counter running, 1 = Counter stopped)
199 // Bit 6 Restart Counter: 1 = Restart software power down counter
200 // set via register 0xB8, (self-cleaning)
201 // Bit 7 SPOFF: 1 = Force software power down (self-cleaning)
202
203 write_io_cr(0xF4, reg);
204}
205
206/* -- Higher level functions ------------------------------------*/
207
208/* initialize watchdog */
209
210static void wb_smsc_wdt_initialize(void)
211{
212 unsigned char old;
213
214 spin_lock(&io_lock);
215 open_io_config();
216 select_io_device(IODEV_NO);
217
218 // enable the watchdog
219 gpio_bit13(0x08); // Select pin 80 = LED not GPIO
220 gpio_bit12(0x0A); // Set pin 79 = WDT not GPIO/Output/Polarity=Invert
221
222 // disable the timeout
223 wdt_timeout_value(0);
224
225 // reset control register
226 wdt_timer_ctrl(0x00);
227
228 // reset configuration register
229 wdt_timer_conf(0x00);
230
231 // read old (timer units) register
232 old = read_io_cr(0xF1) & 0x7F;
233 if (unit == UNIT_SECOND) old |= 0x80; // set to seconds
234
235 // set the watchdog timer units
236 wdt_timer_units(old);
237
238 close_io_config();
239 spin_unlock(&io_lock);
240}
241
242/* shutdown the watchdog */
243
244static void wb_smsc_wdt_shutdown(void)
245{
246 spin_lock(&io_lock);
247 open_io_config();
248 select_io_device(IODEV_NO);
249
250 // disable the watchdog
251 gpio_bit13(0x09);
252 gpio_bit12(0x09);
253
254 // reset watchdog config register
255 wdt_timer_conf(0x00);
256
257 // reset watchdog control register
258 wdt_timer_ctrl(0x00);
259
260 // disable timeout
261 wdt_timeout_value(0x00);
262
263 close_io_config();
264 spin_unlock(&io_lock);
265}
266
267/* set timeout => enable watchdog */
268
269static void wb_smsc_wdt_set_timeout(unsigned char new_timeout)
270{
271 spin_lock(&io_lock);
272 open_io_config();
273 select_io_device(IODEV_NO);
274
275 // set Power LED to blink, if we enable the timeout
276 wdt_timer_ctrl((new_timeout == 0) ? 0x00 : 0x02);
277
278 // set timeout value
279 wdt_timeout_value(new_timeout);
280
281 close_io_config();
282 spin_unlock(&io_lock);
283}
284
285/* get timeout */
286
287static unsigned char wb_smsc_wdt_get_timeout(void)
288{
289 unsigned char set_timeout;
290
291 spin_lock(&io_lock);
292 open_io_config();
293 select_io_device(IODEV_NO);
294 set_timeout = read_io_cr(0xF2);
295 close_io_config();
296 spin_unlock(&io_lock);
297
298 return set_timeout;
299}
300
301/* disable watchdog */
302
303static void wb_smsc_wdt_disable(void)
304{
305 // set the timeout to 0 to disable the watchdog
306 wb_smsc_wdt_set_timeout(0);
307}
308
309/* enable watchdog by setting the current timeout */
310
311static void wb_smsc_wdt_enable(void)
312{
313 // set the current timeout...
314 wb_smsc_wdt_set_timeout(timeout);
315}
316
317/* reset the timer */
318
319static void wb_smsc_wdt_reset_timer(void)
320{
321 spin_lock(&io_lock);
322 open_io_config();
323 select_io_device(IODEV_NO);
324
325 // reset the timer
326 wdt_timeout_value(timeout);
327 wdt_timer_conf(0x08);
328
329 close_io_config();
330 spin_unlock(&io_lock);
331}
332
333/* return, if the watchdog is enabled (timeout is set...) */
334
335static int wb_smsc_wdt_status(void)
336{
337 return (wb_smsc_wdt_get_timeout() == 0) ? 0 : WDIOF_KEEPALIVEPING;
338}
339
340
341/* -- File operations -------------------------------------------*/
342
343/* open => enable watchdog and set initial timeout */
344
345static int wb_smsc_wdt_open(struct inode *inode, struct file *file)
346{
347 /* /dev/watchdog can only be opened once */
348
349 if (test_and_set_bit(0, &timer_enabled))
350 return -EBUSY;
351
352 if (nowayout)
353 __module_get(THIS_MODULE);
354
355 /* Reload and activate timer */
356 wb_smsc_wdt_enable();
357
358 printk(KERN_INFO MODNAME "Watchdog enabled. Timeout set to %d %s.\n", timeout, (unit == UNIT_SECOND) ? "second(s)" : "minute(s)");
359
360 return nonseekable_open(inode, file);
361}
362
363/* close => shut off the timer */
364
365static int wb_smsc_wdt_release(struct inode *inode, struct file *file)
366{
367 /* Shut off the timer. */
368
369 if (expect_close == 42) {
370 wb_smsc_wdt_disable();
371 printk(KERN_INFO MODNAME "Watchdog disabled, sleeping again...\n");
372 } else {
373 printk(KERN_CRIT MODNAME "Unexpected close, not stopping watchdog!\n");
374 wb_smsc_wdt_reset_timer();
375 }
376
377 clear_bit(0, &timer_enabled);
378 expect_close = 0;
379 return 0;
380}
381
382/* write => update the timer to keep the machine alive */
383
384static ssize_t wb_smsc_wdt_write(struct file *file, const char __user *data,
385 size_t len, loff_t *ppos)
386{
387 /* See if we got the magic character 'V' and reload the timer */
388 if (len) {
389 if (!nowayout) {
390 size_t i;
391
392 /* reset expect flag */
393 expect_close = 0;
394
395 /* scan to see whether or not we got the magic character */
396 for (i = 0; i != len; i++) {
397 char c;
398 if (get_user(c, data+i))
399 return -EFAULT;
400 if (c == 'V')
401 expect_close = 42;
402 }
403 }
404
405 /* someone wrote to us, we should reload the timer */
406 wb_smsc_wdt_reset_timer();
407 }
408 return len;
409}
410
411/* ioctl => control interface */
412
413static int wb_smsc_wdt_ioctl(struct inode *inode, struct file *file,
414 unsigned int cmd, unsigned long arg)
415{
416 int new_timeout;
417
418 union {
419 struct watchdog_info __user *ident;
420 int __user *i;
421 } uarg;
422
423 static struct watchdog_info ident = {
424 .options = WDIOF_KEEPALIVEPING |
425 WDIOF_SETTIMEOUT |
426 WDIOF_MAGICCLOSE,
427 .firmware_version = 0,
428 .identity = "SMsC 37B787 Watchdog"
429 };
430
431 uarg.i = (int __user *)arg;
432
433 switch (cmd) {
434 default:
435 return -ENOTTY;
436
437 case WDIOC_GETSUPPORT:
438 return copy_to_user(uarg.ident, &ident,
439 sizeof(ident)) ? -EFAULT : 0;
440
441 case WDIOC_GETSTATUS:
442 return put_user(wb_smsc_wdt_status(), uarg.i);
443
444 case WDIOC_GETBOOTSTATUS:
445 return put_user(0, uarg.i);
446
447 case WDIOC_KEEPALIVE:
448 wb_smsc_wdt_reset_timer();
449 return 0;
450
451 case WDIOC_SETTIMEOUT:
452 if (get_user(new_timeout, uarg.i))
453 return -EFAULT;
454
455 // the API states this is given in secs
456 if (unit == UNIT_MINUTE)
457 new_timeout /= 60;
458
459 if (new_timeout < 0 || new_timeout > MAX_TIMEOUT)
460 return -EINVAL;
461
462 timeout = new_timeout;
463 wb_smsc_wdt_set_timeout(timeout);
464
465 // fall through and return the new timeout...
466
467 case WDIOC_GETTIMEOUT:
468
469 new_timeout = timeout;
470
471 if (unit == UNIT_MINUTE)
472 new_timeout *= 60;
473
474 return put_user(new_timeout, uarg.i);
475
476 case WDIOC_SETOPTIONS:
477 {
478 int options, retval = -EINVAL;
479
480 if (get_user(options, uarg.i))
481 return -EFAULT;
482
483 if (options & WDIOS_DISABLECARD) {
484 wb_smsc_wdt_disable();
485 retval = 0;
486 }
487
488 if (options & WDIOS_ENABLECARD) {
489 wb_smsc_wdt_enable();
490 retval = 0;
491 }
492
493 return retval;
494 }
495 }
496}
497
498/* -- Notifier funtions -----------------------------------------*/
499
500static int wb_smsc_wdt_notify_sys(struct notifier_block *this, unsigned long code, void *unused)
501{
502 if (code == SYS_DOWN || code == SYS_HALT)
503 {
504 // set timeout to 0, to avoid possible race-condition
505 timeout = 0;
506 wb_smsc_wdt_disable();
507 }
508 return NOTIFY_DONE;
509}
510
511/* -- Module's structures ---------------------------------------*/
512
513static struct file_operations wb_smsc_wdt_fops =
514{
515 .owner = THIS_MODULE,
516 .llseek = no_llseek,
517 .write = wb_smsc_wdt_write,
518 .ioctl = wb_smsc_wdt_ioctl,
519 .open = wb_smsc_wdt_open,
520 .release = wb_smsc_wdt_release,
521};
522
523static struct notifier_block wb_smsc_wdt_notifier =
524{
525 .notifier_call = wb_smsc_wdt_notify_sys,
526};
527
528static struct miscdevice wb_smsc_wdt_miscdev =
529{
530 .minor = WATCHDOG_MINOR,
531 .name = "watchdog",
532 .fops = &wb_smsc_wdt_fops,
533};
534
535/* -- Module init functions -------------------------------------*/
536
537/* module's "constructor" */
538
539static int __init wb_smsc_wdt_init(void)
540{
541 int ret;
542
543 spin_lock_init(&io_lock);
544
545 printk("SMsC 37B787 watchdog component driver " VERSION " initialising...\n");
546
547 if (!request_region(IOPORT, IOPORT_SIZE, "SMsC 37B787 watchdog")) {
548 printk(KERN_ERR MODNAME "Unable to register IO port %#x\n", IOPORT);
549 ret = -EBUSY;
550 goto out_pnp;
551 }
552
553 // set new maximum, if it's too big
554 if (timeout > MAX_TIMEOUT)
555 timeout = MAX_TIMEOUT;
556
557 // init the watchdog timer
558 wb_smsc_wdt_initialize();
559
560 ret = register_reboot_notifier(&wb_smsc_wdt_notifier);
561 if (ret) {
562 printk(KERN_ERR MODNAME "Unable to register reboot notifier err = %d\n", ret);
563 goto out_io;
564 }
565
566 ret = misc_register(&wb_smsc_wdt_miscdev);
567 if (ret) {
568 printk(KERN_ERR MODNAME "Unable to register miscdev on minor %d\n", WATCHDOG_MINOR);
569 goto out_rbt;
570 }
571
572 // output info
573 printk(KERN_INFO MODNAME "Timeout set to %d %s.\n", timeout, (unit == UNIT_SECOND) ? "second(s)" : "minute(s)");
574 printk(KERN_INFO MODNAME "Watchdog initialized and sleeping (nowayout=%d)...\n", nowayout);
575
576 // ret = 0
577
578out_clean:
579 return ret;
580
581out_rbt:
582 unregister_reboot_notifier(&wb_smsc_wdt_notifier);
583
584out_io:
585 release_region(IOPORT, IOPORT_SIZE);
586
587out_pnp:
588 goto out_clean;
589}
590
591/* module's "destructor" */
592
593static void __exit wb_smsc_wdt_exit(void)
594{
595 /* Stop the timer before we leave */
596 if (!nowayout)
597 {
598 wb_smsc_wdt_shutdown();
599 printk(KERN_INFO MODNAME "Watchdog disabled.\n");
600 }
601
602 misc_deregister(&wb_smsc_wdt_miscdev);
603 unregister_reboot_notifier(&wb_smsc_wdt_notifier);
604 release_region(IOPORT, IOPORT_SIZE);
605
606 printk("SMsC 37B787 watchdog component driver removed.\n");
607}
608
609module_init(wb_smsc_wdt_init);
610module_exit(wb_smsc_wdt_exit);
611
612MODULE_AUTHOR("Sven Anders <anders@anduras.de>");
613MODULE_DESCRIPTION("Driver for SMsC 37B787 watchdog component (Version " VERSION ")");
614MODULE_LICENSE("GPL");
615
616MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
617
618#ifdef SMSC_SUPPORT_MINUTES
619module_param(unit, int, 0);
620MODULE_PARM_DESC(unit, "set unit to use, 0=seconds or 1=minutes, default is 0");
621#endif
622
623module_param(timeout, int, 0);
624MODULE_PARM_DESC(timeout, "range is 1-255 units, default is 60");
625
626module_param(nowayout, int, 0);
627MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=CONFIG_WATCHDOG_NOWAYOUT)");
diff --git a/drivers/char/watchdog/w83627hf_wdt.c b/drivers/char/watchdog/w83627hf_wdt.c
index b4adc527e687..07d4bff27226 100644
--- a/drivers/char/watchdog/w83627hf_wdt.c
+++ b/drivers/char/watchdog/w83627hf_wdt.c
@@ -33,6 +33,7 @@
33#include <linux/notifier.h> 33#include <linux/notifier.h>
34#include <linux/reboot.h> 34#include <linux/reboot.h>
35#include <linux/init.h> 35#include <linux/init.h>
36#include <linux/spinlock.h>
36 37
37#include <asm/io.h> 38#include <asm/io.h>
38#include <asm/uaccess.h> 39#include <asm/uaccess.h>
@@ -44,6 +45,7 @@
44 45
45static unsigned long wdt_is_open; 46static unsigned long wdt_is_open;
46static char expect_close; 47static char expect_close;
48static spinlock_t io_lock;
47 49
48/* You must set this - there is no sane way to probe for this board. */ 50/* You must set this - there is no sane way to probe for this board. */
49static int wdt_io = 0x2E; 51static int wdt_io = 0x2E;
@@ -110,12 +112,16 @@ w83627hf_init(void)
110static void 112static void
111wdt_ctrl(int timeout) 113wdt_ctrl(int timeout)
112{ 114{
115 spin_lock(&io_lock);
116
113 w83627hf_select_wd_register(); 117 w83627hf_select_wd_register();
114 118
115 outb_p(0xF6, WDT_EFER); /* Select CRF6 */ 119 outb_p(0xF6, WDT_EFER); /* Select CRF6 */
116 outb_p(timeout, WDT_EFDR); /* Write Timeout counter to CRF6 */ 120 outb_p(timeout, WDT_EFDR); /* Write Timeout counter to CRF6 */
117 121
118 w83627hf_unselect_wd_register(); 122 w83627hf_unselect_wd_register();
123
124 spin_unlock(&io_lock);
119} 125}
120 126
121static int 127static int
@@ -303,6 +309,8 @@ wdt_init(void)
303{ 309{
304 int ret; 310 int ret;
305 311
312 spin_lock_init(&io_lock);
313
306 printk(KERN_INFO "WDT driver for the Winbond(TM) W83627HF Super I/O chip initialising.\n"); 314 printk(KERN_INFO "WDT driver for the Winbond(TM) W83627HF Super I/O chip initialising.\n");
307 315
308 if (wdt_set_heartbeat(timeout)) { 316 if (wdt_set_heartbeat(timeout)) {
diff --git a/drivers/char/watchdog/w83697hf_wdt.c b/drivers/char/watchdog/w83697hf_wdt.c
new file mode 100644
index 000000000000..7768b55487c8
--- /dev/null
+++ b/drivers/char/watchdog/w83697hf_wdt.c
@@ -0,0 +1,450 @@
1/*
2 * w83697hf/hg WDT driver
3 *
4 * (c) Copyright 2006 Samuel Tardieu <sam@rfc1149.net>
5 * (c) Copyright 2006 Marcus Junker <junker@anduras.de>
6 *
7 * Based on w83627hf_wdt.c which is based on advantechwdt.c
8 * which is based on wdt.c.
9 * Original copyright messages:
10 *
11 * (c) Copyright 2003 Pádraig Brady <P@draigBrady.com>
12 *
13 * (c) Copyright 2000-2001 Marek Michalkiewicz <marekm@linux.org.pl>
14 *
15 * (c) Copyright 1996 Alan Cox <alan@redhat.com>, All Rights Reserved.
16 * http://www.redhat.com
17 *
18 * This program is free software; you can redistribute it and/or
19 * modify it under the terms of the GNU General Public License
20 * as published by the Free Software Foundation; either version
21 * 2 of the License, or (at your option) any later version.
22 *
23 * Neither Marcus Junker nor ANDURAS AG admit liability nor provide
24 * warranty for any of this software. This material is provided
25 * "AS-IS" and at no charge.
26 */
27
28#include <linux/module.h>
29#include <linux/moduleparam.h>
30#include <linux/types.h>
31#include <linux/miscdevice.h>
32#include <linux/watchdog.h>
33#include <linux/fs.h>
34#include <linux/ioport.h>
35#include <linux/notifier.h>
36#include <linux/reboot.h>
37#include <linux/init.h>
38#include <linux/spinlock.h>
39
40#include <asm/io.h>
41#include <asm/uaccess.h>
42#include <asm/system.h>
43
44#define WATCHDOG_NAME "w83697hf/hg WDT"
45#define PFX WATCHDOG_NAME ": "
46#define WATCHDOG_TIMEOUT 60 /* 60 sec default timeout */
47
48static unsigned long wdt_is_open;
49static char expect_close;
50static spinlock_t io_lock;
51
52/* You must set this - there is no sane way to probe for this board. */
53static int wdt_io = 0x2e;
54module_param(wdt_io, int, 0);
55MODULE_PARM_DESC(wdt_io, "w83697hf/hg WDT io port (default 0x2e, 0 = autodetect)");
56
57static int timeout = WATCHDOG_TIMEOUT; /* in seconds */
58module_param(timeout, int, 0);
59MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds. 1<= timeout <=255, default=" __MODULE_STRING(WATCHDOG_TIMEOUT) ".");
60
61static int nowayout = WATCHDOG_NOWAYOUT;
62module_param(nowayout, int, 0);
63MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=CONFIG_WATCHDOG_NOWAYOUT)");
64
65/*
66 * Kernel methods.
67 */
68
69#define W83697HF_EFER (wdt_io+0) /* Extended Function Enable Register */
70#define W83697HF_EFIR (wdt_io+0) /* Extended Function Index Register (same as EFER) */
71#define W83697HF_EFDR (wdt_io+1) /* Extended Function Data Register */
72
73static inline void
74w83697hf_unlock(void)
75{
76 outb_p(0x87, W83697HF_EFER); /* Enter extended function mode */
77 outb_p(0x87, W83697HF_EFER); /* Again according to manual */
78}
79
80static inline void
81w83697hf_lock(void)
82{
83 outb_p(0xAA, W83697HF_EFER); /* Leave extended function mode */
84}
85
86/*
87 * The three functions w83697hf_get_reg(), w83697hf_set_reg() and
88 * w83697hf_write_timeout() must be called with the device unlocked.
89 */
90
91static unsigned char
92w83697hf_get_reg(unsigned char reg)
93{
94 outb_p(reg, W83697HF_EFIR);
95 return inb_p(W83697HF_EFDR);
96}
97
98static void
99w83697hf_set_reg(unsigned char reg, unsigned char data)
100{
101 outb_p(reg, W83697HF_EFIR);
102 outb_p(data, W83697HF_EFDR);
103}
104
105static void
106w83697hf_write_timeout(int timeout)
107{
108 w83697hf_set_reg(0xF4, timeout); /* Write Timeout counter to CRF4 */
109}
110
111static void
112w83697hf_select_wdt(void)
113{
114 w83697hf_unlock();
115 w83697hf_set_reg(0x07, 0x08); /* Switch to logic device 8 (GPIO2) */
116}
117
118static inline void
119w83697hf_deselect_wdt(void)
120{
121 w83697hf_lock();
122}
123
124static void
125w83697hf_init(void)
126{
127 unsigned char bbuf;
128
129 w83697hf_select_wdt();
130
131 bbuf = w83697hf_get_reg(0x29);
132 bbuf &= ~0x60;
133 bbuf |= 0x20;
134 w83697hf_set_reg(0x29, bbuf); /* Set pin 119 to WDTO# mode (= CR29, WDT0) */
135
136 bbuf = w83697hf_get_reg(0xF3);
137 bbuf &= ~0x04;
138 w83697hf_set_reg(0xF3, bbuf); /* Count mode is seconds */
139
140 w83697hf_deselect_wdt();
141}
142
143static int
144wdt_ping(void)
145{
146 spin_lock(&io_lock);
147 w83697hf_select_wdt();
148
149 w83697hf_write_timeout(timeout);
150
151 w83697hf_deselect_wdt();
152 spin_unlock(&io_lock);
153 return 0;
154}
155
156static int
157wdt_enable(void)
158{
159 spin_lock(&io_lock);
160 w83697hf_select_wdt();
161
162 w83697hf_write_timeout(timeout);
163 w83697hf_set_reg(0x30, 1); /* Enable timer */
164
165 w83697hf_deselect_wdt();
166 spin_unlock(&io_lock);
167 return 0;
168}
169
170static int
171wdt_disable(void)
172{
173 spin_lock(&io_lock);
174 w83697hf_select_wdt();
175
176 w83697hf_set_reg(0x30, 0); /* Disable timer */
177 w83697hf_write_timeout(0);
178
179 w83697hf_deselect_wdt();
180 spin_unlock(&io_lock);
181 return 0;
182}
183
184static int
185wdt_set_heartbeat(int t)
186{
187 if ((t < 1) || (t > 255))
188 return -EINVAL;
189
190 timeout = t;
191 return 0;
192}
193
194static ssize_t
195wdt_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos)
196{
197 if (count) {
198 if (!nowayout) {
199 size_t i;
200
201 expect_close = 0;
202
203 for (i = 0; i != count; i++) {
204 char c;
205 if (get_user(c, buf+i))
206 return -EFAULT;
207 if (c == 'V')
208 expect_close = 42;
209 }
210 }
211 wdt_ping();
212 }
213 return count;
214}
215
216static int
217wdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
218 unsigned long arg)
219{
220 void __user *argp = (void __user *)arg;
221 int __user *p = argp;
222 int new_timeout;
223 static struct watchdog_info ident = {
224 .options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE,
225 .firmware_version = 1,
226 .identity = "W83697HF WDT",
227 };
228
229 switch (cmd) {
230 case WDIOC_GETSUPPORT:
231 if (copy_to_user(argp, &ident, sizeof(ident)))
232 return -EFAULT;
233 break;
234
235 case WDIOC_GETSTATUS:
236 case WDIOC_GETBOOTSTATUS:
237 return put_user(0, p);
238
239 case WDIOC_KEEPALIVE:
240 wdt_ping();
241 break;
242
243 case WDIOC_SETTIMEOUT:
244 if (get_user(new_timeout, p))
245 return -EFAULT;
246 if (wdt_set_heartbeat(new_timeout))
247 return -EINVAL;
248 wdt_ping();
249 /* Fall */
250
251 case WDIOC_GETTIMEOUT:
252 return put_user(timeout, p);
253
254 case WDIOC_SETOPTIONS:
255 {
256 int options, retval = -EINVAL;
257
258 if (get_user(options, p))
259 return -EFAULT;
260
261 if (options & WDIOS_DISABLECARD) {
262 wdt_disable();
263 retval = 0;
264 }
265
266 if (options & WDIOS_ENABLECARD) {
267 wdt_enable();
268 retval = 0;
269 }
270
271 return retval;
272 }
273
274 default:
275 return -ENOTTY;
276 }
277 return 0;
278}
279
280static int
281wdt_open(struct inode *inode, struct file *file)
282{
283 if (test_and_set_bit(0, &wdt_is_open))
284 return -EBUSY;
285 /*
286 * Activate
287 */
288
289 wdt_enable();
290 return nonseekable_open(inode, file);
291}
292
293static int
294wdt_close(struct inode *inode, struct file *file)
295{
296 if (expect_close == 42) {
297 wdt_disable();
298 } else {
299 printk (KERN_CRIT PFX "Unexpected close, not stopping watchdog!\n");
300 wdt_ping();
301 }
302 expect_close = 0;
303 clear_bit(0, &wdt_is_open);
304 return 0;
305}
306
307/*
308 * Notifier for system down
309 */
310
311static int
312wdt_notify_sys(struct notifier_block *this, unsigned long code,
313 void *unused)
314{
315 if (code == SYS_DOWN || code == SYS_HALT) {
316 /* Turn the WDT off */
317 wdt_disable();
318 }
319 return NOTIFY_DONE;
320}
321
322/*
323 * Kernel Interfaces
324 */
325
326static struct file_operations wdt_fops = {
327 .owner = THIS_MODULE,
328 .llseek = no_llseek,
329 .write = wdt_write,
330 .ioctl = wdt_ioctl,
331 .open = wdt_open,
332 .release = wdt_close,
333};
334
335static struct miscdevice wdt_miscdev = {
336 .minor = WATCHDOG_MINOR,
337 .name = "watchdog",
338 .fops = &wdt_fops,
339};
340
341/*
342 * The WDT needs to learn about soft shutdowns in order to
343 * turn the timebomb registers off.
344 */
345
346static struct notifier_block wdt_notifier = {
347 .notifier_call = wdt_notify_sys,
348};
349
350static int
351w83697hf_check_wdt(void)
352{
353 if (!request_region(wdt_io, 2, WATCHDOG_NAME)) {
354 printk (KERN_ERR PFX "I/O address 0x%x already in use\n", wdt_io);
355 return -EIO;
356 }
357
358 printk (KERN_DEBUG PFX "Looking for watchdog at address 0x%x\n", wdt_io);
359 w83697hf_unlock();
360 if (w83697hf_get_reg(0x20) == 0x60) {
361 printk (KERN_INFO PFX "watchdog found at address 0x%x\n", wdt_io);
362 w83697hf_lock();
363 return 0;
364 }
365 w83697hf_lock(); /* Reprotect in case it was a compatible device */
366
367 printk (KERN_INFO PFX "watchdog not found at address 0x%x\n", wdt_io);
368 release_region(wdt_io, 2);
369 return -EIO;
370}
371
372static int w83697hf_ioports[] = { 0x2e, 0x4e, 0x00 };
373
374static int __init
375wdt_init(void)
376{
377 int ret, i, found = 0;
378
379 spin_lock_init(&io_lock);
380
381 printk (KERN_INFO PFX "WDT driver for W83697HF/HG initializing\n");
382
383 if (wdt_io == 0) {
384 /* we will autodetect the W83697HF/HG watchdog */
385 for (i = 0; ((!found) && (w83697hf_ioports[i] != 0)); i++) {
386 wdt_io = w83697hf_ioports[i];
387 if (!w83697hf_check_wdt())
388 found++;
389 }
390 } else {
391 if (!w83697hf_check_wdt())
392 found++;
393 }
394
395 if (!found) {
396 printk (KERN_ERR PFX "No W83697HF/HG could be found\n");
397 ret = -EIO;
398 goto out;
399 }
400
401 w83697hf_init();
402 wdt_disable(); /* Disable watchdog until first use */
403
404 if (wdt_set_heartbeat(timeout)) {
405 wdt_set_heartbeat(WATCHDOG_TIMEOUT);
406 printk (KERN_INFO PFX "timeout value must be 1<=timeout<=255, using %d\n",
407 WATCHDOG_TIMEOUT);
408 }
409
410 ret = register_reboot_notifier(&wdt_notifier);
411 if (ret != 0) {
412 printk (KERN_ERR PFX "cannot register reboot notifier (err=%d)\n",
413 ret);
414 goto unreg_regions;
415 }
416
417 ret = misc_register(&wdt_miscdev);
418 if (ret != 0) {
419 printk (KERN_ERR PFX "cannot register miscdev on minor=%d (err=%d)\n",
420 WATCHDOG_MINOR, ret);
421 goto unreg_reboot;
422 }
423
424 printk (KERN_INFO PFX "initialized. timeout=%d sec (nowayout=%d)\n",
425 timeout, nowayout);
426
427out:
428 return ret;
429unreg_reboot:
430 unregister_reboot_notifier(&wdt_notifier);
431unreg_regions:
432 release_region(wdt_io, 2);
433 goto out;
434}
435
436static void __exit
437wdt_exit(void)
438{
439 misc_deregister(&wdt_miscdev);
440 unregister_reboot_notifier(&wdt_notifier);
441 release_region(wdt_io, 2);
442}
443
444module_init(wdt_init);
445module_exit(wdt_exit);
446
447MODULE_LICENSE("GPL");
448MODULE_AUTHOR("Marcus Junker <junker@anduras.de>, Samuel Tardieu <sam@rfc1149.net>");
449MODULE_DESCRIPTION("w83697hf/hg WDT driver");
450MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
generated by cgit v1.2.2 (git 2.25.0) at 2024-11-09 23:22:03 -0500