4 files changed, 181 insertions, 151 deletions

diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c
index 48c8c9195dc3..2f8f6ecf111f 100644
--- a/arch/arm/mach-omap1/board-h2.c
+++ b/arch/arm/mach-omap1/board-h2.c
@@ -20,22 +20,23 @@
  */
 
 #include <linux/kernel.h>
-#include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/delay.h>
+#include <linux/i2c.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
 #include <linux/input.h>
-#include <linux/workqueue.h>
 
 #include <asm/hardware.h>
+#include <asm/gpio.h>
+
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
 #include <asm/mach/map.h>
 
-#include <asm/arch/gpio.h>
+#include <asm/arch/tps65010.h>
 #include <asm/arch/mux.h>
 #include <asm/arch/tc.h>
 #include <asm/arch/irda.h>
@@ -277,6 +278,20 @@ static struct platform_device *h2_devices[] __initdata = {
         &h2_mcbsp1_device,
 };
 
+static struct i2c_board_info __initdata h2_i2c_board_info[] = {
+        {
+                I2C_BOARD_INFO("tps65010", 0x48),
+                .type           = "tps65010",
+                .irq            = OMAP_GPIO_IRQ(58),
+        },
+        /* TODO when driver support is ready:
+         *  - isp1301 OTG transceiver
+         *  - optional ov9640 camera sensor at 0x30
+         *  - pcf9754 for aGPS control
+         *  - ... etc
+         */
+};
+
 static void __init h2_init_smc91x(void)
 {
         if ((omap_request_gpio(0)) < 0) {
@@ -367,6 +382,14 @@ static void __init h2_init(void)
         omap_board_config = h2_config;
         omap_board_config_size = ARRAY_SIZE(h2_config);
         omap_serial_init();
+
+        /* irq for tps65010 chip */
+        omap_cfg_reg(W4_GPIO58);
+        if (gpio_request(58, "tps65010") == 0)
+                gpio_direction_input(58);
+
+        i2c_register_board_info(1, h2_i2c_board_info,
+                        ARRAY_SIZE(h2_i2c_board_info));
 }
 
 static void __init h2_map_io(void)
@@ -374,6 +397,22 @@ static void __init h2_map_io(void)
         omap1_map_common_io();
 }
 
+#ifdef CONFIG_TPS65010
+static int __init h2_tps_init(void)
+{
+        if (!machine_is_omap_h2())
+                return 0;
+
+        /* gpio3 for SD, gpio4 for VDD_DSP */
+        /* FIXME send power to DSP iff it's configured */
+
+        /* Enable LOW_PWR */
+        tps65010_set_low_pwr(ON);
+        return 0;
+}
+fs_initcall(h2_tps_init);
+#endif
+
 MACHINE_START(OMAP_H2, "TI-H2")
         /* Maintainer: Imre Deak <imre.deak@nokia.com> */
         .phys_io        = 0xfff00000,
diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c
index 79d4ef4c54d4..add2f703204f 100644
--- a/arch/arm/mach-omap1/board-h3.c
+++ b/arch/arm/mach-omap1/board-h3.c
@@ -21,6 +21,7 @@
 #include <linux/platform_device.h>
 #include <linux/errno.h>
 #include <linux/workqueue.h>
+#include <linux/i2c.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
@@ -29,12 +30,14 @@
 #include <asm/setup.h>
 #include <asm/page.h>
 #include <asm/hardware.h>
+#include <asm/gpio.h>
+
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
 #include <asm/mach/map.h>
 
-#include <asm/arch/gpio.h>
+#include <asm/arch/tps65010.h>
 #include <asm/arch/gpioexpander.h>
 #include <asm/arch/irqs.h>
 #include <asm/arch/mux.h>
@@ -413,6 +416,19 @@ static struct omap_board_config_kernel h3_config[] = {
         { OMAP_TAG_LCD,         &h3_lcd_config },
 };
 
+static struct i2c_board_info __initdata h3_i2c_board_info[] = {
+        {
+                I2C_BOARD_INFO("tps65010", 0x48),
+                .type           = "tps65013",
+                /* .irq         = OMAP_GPIO_IRQ(??), */
+        },
+        /* TODO when driver support is ready:
+         *  - isp1301 OTG transceiver
+         *  - optional ov9640 camera sensor at 0x30
+         *  - ...
+         */
+};
+
 #define H3_NAND_RB_GPIO_PIN     10
 
 static int nand_dev_ready(struct nand_platform_data *data)
@@ -446,6 +462,10 @@ static void __init h3_init(void)
         omap_board_config = h3_config;
         omap_board_config_size = ARRAY_SIZE(h3_config);
         omap_serial_init();
+
+        /* FIXME setup irq for tps65013 chip */
+        i2c_register_board_info(1, h3_i2c_board_info,
+                        ARRAY_SIZE(h3_i2c_board_info));
 }
 
 static void __init h3_init_smc91x(void)
@@ -470,6 +490,23 @@ static void __init h3_map_io(void)
         omap1_map_common_io();
 }
 
+#ifdef CONFIG_TPS65010
+static int __init h3_tps_init(void)
+{
+        if (!machine_is_omap_h3())
+                return 0;
+
+        /* gpio4 for SD, gpio3 for VDD_DSP */
+        /* FIXME send power to DSP iff it's configured */
+
+        /* Enable LOW_PWR */
+        tps65013_set_low_pwr(ON);
+
+        return 0;
+}
+fs_initcall(h3_tps_init);
+#endif
+
 MACHINE_START(OMAP_H3, "TI OMAP1710 H3 board")
         /* Maintainer: Texas Instruments, Inc. */
         .phys_io        = 0xfff00000,
diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
index e7130293a03f..a61bf455ee02 100644
--- a/arch/arm/mach-omap1/board-osk.c
+++ b/arch/arm/mach-omap1/board-osk.c
@@ -31,18 +31,21 @@
 #include <linux/platform_device.h>
 #include <linux/irq.h>
 #include <linux/interrupt.h>
+#include <linux/i2c.h>
 
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 
 #include <asm/hardware.h>
+#include <asm/gpio.h>
+
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/flash.h>
 
-#include <asm/arch/gpio.h>
 #include <asm/arch/usb.h>
+#include <asm/arch/tps65010.h>
 #include <asm/arch/mux.h>
 #include <asm/arch/tc.h>
 #include <asm/arch/common.h>
@@ -179,6 +182,19 @@ static struct platform_device *osk5912_devices[] __initdata = {
         &osk5912_mcbsp1_device,
 };
 
+static struct i2c_board_info __initdata osk_i2c_board_info[] = {
+        {
+                I2C_BOARD_INFO("tps65010", 0x48),
+                .type           = "tps65010",
+                .irq            = OMAP_GPIO_IRQ(OMAP_MPUIO(1)),
+        },
+        /* TODO when driver support is ready:
+         *  - aic23 audio chip at 0x1a
+         *  - on Mistral, 24c04 eeprom at 0x50
+         *  - optionally on Mistral, ov9640 camera sensor at 0x30
+         */
+};
+
 static void __init osk_init_smc91x(void)
 {
         if ((omap_request_gpio(0)) < 0) {
@@ -397,6 +413,14 @@ static void __init osk_init(void)
         omap_board_config_size = ARRAY_SIZE(osk_config);
         USB_TRANSCEIVER_CTRL_REG |= (3 << 1);
 
+        /* irq for tps65010 chip */
+        /* bootloader effectively does:  omap_cfg_reg(U19_1610_MPUIO1); */
+        if (gpio_request(OMAP_MPUIO(1), "tps65010") == 0)
+                gpio_direction_input(OMAP_MPUIO(1));
+
+        i2c_register_board_info(1, osk_i2c_board_info,
+                        ARRAY_SIZE(osk_i2c_board_info));
+
         omap_serial_init();
         osk_mistral_init();
 }
@@ -406,6 +430,44 @@ static void __init osk_map_io(void)
         omap1_map_common_io();
 }
 
+#ifdef CONFIG_TPS65010
+static int __init osk_tps_init(void)
+{
+        if (!machine_is_omap_osk())
+                return 0;
+
+        /* Let LED1 (D9) blink */
+        tps65010_set_led(LED1, BLINK);
+
+        /* Disable LED 2 (D2) */
+        tps65010_set_led(LED2, OFF);
+
+        /* Set GPIO 1 HIGH to disable VBUS power supply;
+         * OHCI driver powers it up/down as needed.
+         */
+        tps65010_set_gpio_out_value(GPIO1, HIGH);
+
+        /* Set GPIO 2 low to turn on LED D3 */
+        tps65010_set_gpio_out_value(GPIO2, HIGH);
+
+        /* Set GPIO 3 low to take ethernet out of reset */
+        tps65010_set_gpio_out_value(GPIO3, LOW);
+
+        /* gpio4 for VDD_DSP */
+        /* FIXME send power to DSP iff it's configured */
+
+        /* Enable LOW_PWR */
+        tps65010_set_low_pwr(ON);
+
+        /* Switch VLDO2 to 3.0V for AIC23 */
+        tps65010_config_vregs1(TPS_LDO2_ENABLE | TPS_VLDO2_3_0V
+                        | TPS_LDO1_ENABLE);
+
+        return 0;
+}
+fs_initcall(osk_tps_init);
+#endif
+
 MACHINE_START(OMAP_OSK, "TI-OSK")
         /* Maintainer: Dirk Behme <dirk.behme@de.bosch.com> */
         .phys_io        = 0xfff00000,
diff --git a/drivers/i2c/chips/tps65010.c b/drivers/i2c/chips/tps65010.c
index 402d911a9e7b..e320994b981c 100644
--- a/drivers/i2c/chips/tps65010.c
+++ b/drivers/i2c/chips/tps65010.c
@@ -24,20 +24,13 @@
 #include <linux/init.h>
 #include <linux/slab.h>
 #include <linux/interrupt.h>
-#include <linux/device.h>
 #include <linux/i2c.h>
 #include <linux/delay.h>
 #include <linux/workqueue.h>
-#include <linux/suspend.h>
 #include <linux/debugfs.h>
 #include <linux/seq_file.h>
 #include <linux/mutex.h>
 
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-#include <asm/arch/gpio.h>
-#include <asm/arch/mux.h>
 #include <asm/arch/tps65010.h>
 
 /*-------------------------------------------------------------------------*/
@@ -48,10 +41,6 @@
 MODULE_DESCRIPTION("TPS6501x Power Management Driver");
 MODULE_LICENSE("GPL");
 
-static unsigned short normal_i2c[] = { 0x48, /* 0x49, */ I2C_CLIENT_END };
-
-I2C_CLIENT_INSMOD;
-
 static struct i2c_driver tps65010_driver;
 
 /*-------------------------------------------------------------------------*/
@@ -79,10 +68,8 @@ enum tps_model {
 };
 
 struct tps65010 {
-        struct i2c_client       c;
         struct i2c_client       *client;
         struct mutex            lock;
-        int                     irq;
         struct delayed_work     work;
         struct dentry           *file;
         unsigned                charging:1;
@@ -445,7 +432,7 @@ static void tps65010_work(struct work_struct *work)
         }
 
         if (test_and_clear_bit(FLAG_IRQ_ENABLE, &tps->flags))
-                enable_irq(tps->irq);
+                enable_irq(tps->client->irq);
 
         mutex_unlock(&tps->lock);
 }
@@ -464,116 +451,75 @@ static irqreturn_t tps65010_irq(int irq, void *_tps)
 
 static struct tps65010 *the_tps;
 
-static int __exit tps65010_detach_client(struct i2c_client *client)
+static int __exit tps65010_remove(struct i2c_client *client)
 {
-        struct tps65010         *tps;
+        struct tps65010         *tps = i2c_get_clientdata(client);
 
-        tps = container_of(client, struct tps65010, c);
-        free_irq(tps->irq, tps);
-#ifdef  CONFIG_ARM
-        if (machine_is_omap_h2())
-                omap_free_gpio(58);
-        if (machine_is_omap_osk())
-                omap_free_gpio(OMAP_MPUIO(1));
-#endif
+        if (client->irq > 0)
+                free_irq(client->irq, tps);
         cancel_delayed_work(&tps->work);
         flush_scheduled_work();
         debugfs_remove(tps->file);
-        if (i2c_detach_client(client) == 0)
-                kfree(tps);
+        kfree(tps);
         the_tps = NULL;
         return 0;
 }
 
-static int tps65010_noscan(struct i2c_adapter *bus)
-{
-        /* pure paranoia, in case someone adds another i2c bus
-         * after our init section's gone...
-         */
-        return -ENODEV;
-}
-
-/* no error returns, they'd just make bus scanning stop */
-static int __init
-tps65010_probe(struct i2c_adapter *bus, int address, int kind)
+static int tps65010_probe(struct i2c_client *client)
 {
         struct tps65010         *tps;
         int                     status;
-        unsigned long           irqflags;
-        struct i2c_client       *client;
 
         if (the_tps) {
-                dev_dbg(&bus->dev, "only one %s for now\n", DRIVER_NAME);
-                return 0;
+                dev_dbg(&client->dev, "only one tps6501x chip allowed\n");
+                return -ENODEV;
         }
 
+        if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
+                return -EINVAL;
+
         tps = kzalloc(sizeof *tps, GFP_KERNEL);
         if (!tps)
-                return 0;
+                return -ENOMEM;
 
         mutex_init(&tps->lock);
         INIT_DELAYED_WORK(&tps->work, tps65010_work);
-        tps->irq = -1;
-        tps->c.addr = address;
-        tps->c.adapter = bus;
-        tps->c.driver = &tps65010_driver;
-        strlcpy(tps->c.name, DRIVER_NAME, I2C_NAME_SIZE);
-        tps->client = client = &tps->c;
-
-        status = i2c_attach_client(client);
-        if (status < 0) {
-                dev_dbg(&bus->dev, "can't attach %s to device %d, err %d\n",
-                                DRIVER_NAME, address, status);
-                goto fail1;
-        }
+        tps->client = client;
 
-        /* the IRQ is active low, but many gpio lines can't support that
-         * so this driver can use falling-edge triggers instead.
-         */
-        irqflags = IRQF_SAMPLE_RANDOM;
-#ifdef  CONFIG_ARM
-        if (machine_is_omap_h2()) {
-                tps->model = TPS65010;
-                omap_cfg_reg(W4_GPIO58);
-                tps->irq = OMAP_GPIO_IRQ(58);
-                omap_request_gpio(58);
-                omap_set_gpio_direction(58, 1);
-                irqflags |= IRQF_TRIGGER_FALLING;
-        }
-        if (machine_is_omap_osk()) {
+        if (strcmp(client->name, "tps65010") == 0)
                 tps->model = TPS65010;
-                // omap_cfg_reg(U19_1610_MPUIO1);
-                tps->irq = OMAP_GPIO_IRQ(OMAP_MPUIO(1));
-                omap_request_gpio(OMAP_MPUIO(1));
-                omap_set_gpio_direction(OMAP_MPUIO(1), 1);
-                irqflags |= IRQF_TRIGGER_FALLING;
-        }
-        if (machine_is_omap_h3()) {
+        else if (strcmp(client->name, "tps65011") == 0)
+                tps->model = TPS65011;
+        else if (strcmp(client->name, "tps65012") == 0)
+                tps->model = TPS65012;
+        else if (strcmp(client->name, "tps65013") == 0)
                 tps->model = TPS65013;
-
-                // FIXME set up this board's IRQ ...
+        else {
+                dev_warn(&client->dev, "unknown chip '%s'\n", client->name);
+                status = -ENODEV;
+                goto fail1;
         }
-#endif
 
-        if (tps->irq > 0) {
-                status = request_irq(tps->irq, tps65010_irq,
-                        irqflags, DRIVER_NAME, tps);
+        /* the IRQ is active low, but many gpio lines can't support that
+         * so this driver uses falling-edge triggers instead.
+         */
+        if (client->irq > 0) {
+                status = request_irq(client->irq, tps65010_irq,
+                        IRQF_SAMPLE_RANDOM | IRQF_TRIGGER_FALLING,
+                        DRIVER_NAME, tps);
                 if (status < 0) {
                         dev_dbg(&client->dev, "can't get IRQ %d, err %d\n",
-                                        tps->irq, status);
-                        i2c_detach_client(client);
+                                        client->irq, status);
                         goto fail1;
                 }
-#ifdef  CONFIG_ARM
                 /* annoying race here, ideally we'd have an option
                  * to claim the irq now and enable it later.
+                 * FIXME genirq IRQF_NOAUTOEN now solves that ...
                  */
-                disable_irq(tps->irq);
+                disable_irq(client->irq);
                 set_bit(FLAG_IRQ_ENABLE, &tps->flags);
-#endif
         } else
-                printk(KERN_WARNING "%s: IRQ not configured!\n",
-                                DRIVER_NAME);
+                dev_warn(&client->dev, "IRQ not configured!\n");
 
 
         switch (tps->model) {
@@ -602,7 +548,6 @@ tps65010_probe(struct i2c_adapter *bus, int address, int kind)
                 i2c_smbus_read_byte_data(client, TPS_DEFGPIO),
                 i2c_smbus_read_byte_data(client, TPS_MASK3));
 
-        tps65010_driver.attach_adapter = tps65010_noscan;
         the_tps = tps;
 
 #if     defined(CONFIG_USB_GADGET) && !defined(CONFIG_USB_OTG)
@@ -635,22 +580,15 @@ tps65010_probe(struct i2c_adapter *bus, int address, int kind)
         return 0;
 fail1:
         kfree(tps);
-        return 0;
-}
-
-static int __init tps65010_scan_bus(struct i2c_adapter *bus)
-{
-        if (!i2c_check_functionality(bus, I2C_FUNC_SMBUS_BYTE_DATA))
-                return -EINVAL;
-        return i2c_probe(bus, &addr_data, tps65010_probe);
+        return status;
 }
 
 static struct i2c_driver tps65010_driver = {
         .driver = {
                 .name   = "tps65010",
         },
-        .attach_adapter = tps65010_scan_bus,
-        .detach_client  = __exit_p(tps65010_detach_client),
+        .probe  = tps65010_probe,
+        .remove = __exit_p(tps65010_remove),
 };
 
 /*-------------------------------------------------------------------------*/
@@ -1014,52 +952,6 @@ static int __init tps_init(void)
                 msleep(10);
         }
 
-#ifdef  CONFIG_ARM
-        if (machine_is_omap_osk()) {
-
-                // FIXME: More should be placed in the initialization code
-                //        of the submodules (DSP, ethernet, power management,
-                //        board-osk.c). Careful: I2C is initialized "late".
-
-                /* Let LED1 (D9) blink */
-                tps65010_set_led(LED1, BLINK);
-
-                /* Disable LED 2 (D2) */
-                tps65010_set_led(LED2, OFF);
-
-                /* Set GPIO 1 HIGH to disable VBUS power supply;
-                 * OHCI driver powers it up/down as needed.
-                 */
-                tps65010_set_gpio_out_value(GPIO1, HIGH);
-
-                /* Set GPIO 2 low to turn on LED D3 */
-                tps65010_set_gpio_out_value(GPIO2, HIGH);
-
-                /* Set GPIO 3 low to take ethernet out of reset */
-                tps65010_set_gpio_out_value(GPIO3, LOW);
-
-                /* gpio4 for VDD_DSP */
-
-                /* Enable LOW_PWR */
-                tps65010_set_low_pwr(ON);
-
-                /* Switch VLDO2 to 3.0V for AIC23 */
-                tps65010_config_vregs1(TPS_LDO2_ENABLE | TPS_VLDO2_3_0V | TPS_LDO1_ENABLE);
-
-        } else if (machine_is_omap_h2()) {
-                /* gpio3 for SD, gpio4 for VDD_DSP */
-
-                /* Enable LOW_PWR */
-                tps65010_set_low_pwr(ON);
-        } else if (machine_is_omap_h3()) {
-                /* gpio4 for SD, gpio3 for VDD_DSP */
-#ifdef CONFIG_PM
-                /* Enable LOW_PWR */
-                tps65013_set_low_pwr(ON);
-#endif
-        }
-#endif
-
         return status;
 }
 /* NOTE:  this MUST be initialized before the other parts of the system