2 files changed, 10 insertions, 5 deletions

diff --git a/Documentation/hwmon/it87 b/Documentation/hwmon/it87
index 3496b7020e7c..042c0415140b 100644
--- a/Documentation/hwmon/it87
+++ b/Documentation/hwmon/it87
@@ -136,10 +136,10 @@ once-only alarms.
 The IT87xx only updates its values each 1.5 seconds; reading it more often
 will do no harm, but will return 'old' values.
 
-To change sensor N to a thermistor, 'echo 2 > tempN_type' where N is 1, 2,
+To change sensor N to a thermistor, 'echo 4 > tempN_type' where N is 1, 2,
 or 3. To change sensor N to a thermal diode, 'echo 3 > tempN_type'.
 Give 0 for unused sensor. Any other value is invalid. To configure this at
-startup, consult lm_sensors's /etc/sensors.conf. (2 = thermistor;
+startup, consult lm_sensors's /etc/sensors.conf. (4 = thermistor;
 3 = thermal diode)
 
 
diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c
index d793cc011990..b74c95735f95 100644
--- a/drivers/hwmon/it87.c
+++ b/drivers/hwmon/it87.c
@@ -477,7 +477,7 @@ static ssize_t show_sensor(struct device *dev, struct device_attribute *attr,
         if (reg & (1 << nr))
                 return sprintf(buf, "3\n");  /* thermal diode */
         if (reg & (8 << nr))
-                return sprintf(buf, "2\n");  /* thermistor */
+                return sprintf(buf, "4\n");  /* thermistor */
         return sprintf(buf, "0\n");      /* disabled */
 }
 static ssize_t set_sensor(struct device *dev, struct device_attribute *attr,
@@ -493,10 +493,15 @@ static ssize_t set_sensor(struct device *dev, struct device_attribute *attr,
 
         data->sensor &= ~(1 << nr);
         data->sensor &= ~(8 << nr);
-        /* 3 = thermal diode; 2 = thermistor; 0 = disabled */
+        if (val == 2) { /* backwards compatibility */
+                dev_warn(dev, "Sensor type 2 is deprecated, please use 4 "
+                         "instead\n");
+                val = 4;
+        }
+        /* 3 = thermal diode; 4 = thermistor; 0 = disabled */
         if (val == 3)
             data->sensor |= 1 << nr;
-        else if (val == 2)
+        else if (val == 4)
             data->sensor |= 8 << nr;
         else if (val != 0) {
                 mutex_unlock(&data->update_lock);