diff options
| -rw-r--r-- | drivers/w1/slaves/Kconfig | 13 | ||||
| -rw-r--r-- | drivers/w1/slaves/Makefile | 1 | ||||
| -rw-r--r-- | drivers/w1/slaves/w1_ds2760.c | 213 | ||||
| -rw-r--r-- | drivers/w1/slaves/w1_ds2760.h | 50 | ||||
| -rw-r--r-- | drivers/w1/w1_family.h | 1 |
5 files changed, 278 insertions, 0 deletions
diff --git a/drivers/w1/slaves/Kconfig b/drivers/w1/slaves/Kconfig index 904e5aeb696c..df95d6c2cefa 100644 --- a/drivers/w1/slaves/Kconfig +++ b/drivers/w1/slaves/Kconfig | |||
| @@ -35,4 +35,17 @@ config W1_SLAVE_DS2433_CRC | |||
| 35 | Each block has 30 bytes of data and a two byte CRC16. | 35 | Each block has 30 bytes of data and a two byte CRC16. |
| 36 | Full block writes are only allowed if the CRC is valid. | 36 | Full block writes are only allowed if the CRC is valid. |
| 37 | 37 | ||
| 38 | config W1_SLAVE_DS2760 | ||
| 39 | tristate "Dallas 2760 battery monitor chip (HP iPAQ & others)" | ||
| 40 | depends on W1 | ||
| 41 | help | ||
| 42 | If you enable this you will have the DS2760 battery monitor | ||
| 43 | chip support. | ||
| 44 | |||
| 45 | The battery monitor chip is used in many batteries/devices | ||
| 46 | as the one who is responsible for charging/discharging/monitoring | ||
| 47 | Li+ batteries. | ||
| 48 | |||
| 49 | If you are unsure, say N. | ||
| 50 | |||
| 38 | endmenu | 51 | endmenu |
diff --git a/drivers/w1/slaves/Makefile b/drivers/w1/slaves/Makefile index 725dcfdfddb4..a8eb7524df1d 100644 --- a/drivers/w1/slaves/Makefile +++ b/drivers/w1/slaves/Makefile | |||
| @@ -5,4 +5,5 @@ | |||
| 5 | obj-$(CONFIG_W1_SLAVE_THERM) += w1_therm.o | 5 | obj-$(CONFIG_W1_SLAVE_THERM) += w1_therm.o |
| 6 | obj-$(CONFIG_W1_SLAVE_SMEM) += w1_smem.o | 6 | obj-$(CONFIG_W1_SLAVE_SMEM) += w1_smem.o |
| 7 | obj-$(CONFIG_W1_SLAVE_DS2433) += w1_ds2433.o | 7 | obj-$(CONFIG_W1_SLAVE_DS2433) += w1_ds2433.o |
| 8 | obj-$(CONFIG_W1_SLAVE_DS2760) += w1_ds2760.o | ||
| 8 | 9 | ||
diff --git a/drivers/w1/slaves/w1_ds2760.c b/drivers/w1/slaves/w1_ds2760.c new file mode 100644 index 000000000000..88a37fbccc3f --- /dev/null +++ b/drivers/w1/slaves/w1_ds2760.c | |||
| @@ -0,0 +1,213 @@ | |||
| 1 | /* | ||
| 2 | * 1-Wire implementation for the ds2760 chip | ||
| 3 | * | ||
| 4 | * Copyright © 2004-2005, Szabolcs Gyurko <szabolcs.gyurko@tlt.hu> | ||
| 5 | * | ||
| 6 | * Use consistent with the GNU GPL is permitted, | ||
| 7 | * provided that this copyright notice is | ||
| 8 | * preserved in its entirety in all copies and derived works. | ||
| 9 | * | ||
| 10 | */ | ||
| 11 | |||
| 12 | #include <linux/kernel.h> | ||
| 13 | #include <linux/module.h> | ||
| 14 | #include <linux/device.h> | ||
| 15 | #include <linux/types.h> | ||
| 16 | #include <linux/platform_device.h> | ||
| 17 | #include <linux/mutex.h> | ||
| 18 | #include <linux/idr.h> | ||
| 19 | |||
| 20 | #include "../w1.h" | ||
| 21 | #include "../w1_int.h" | ||
| 22 | #include "../w1_family.h" | ||
| 23 | #include "w1_ds2760.h" | ||
| 24 | |||
| 25 | static int w1_ds2760_io(struct device *dev, char *buf, int addr, size_t count, | ||
| 26 | int io) | ||
| 27 | { | ||
| 28 | struct w1_slave *sl = container_of(dev, struct w1_slave, dev); | ||
| 29 | |||
| 30 | if (!dev) | ||
| 31 | return 0; | ||
| 32 | |||
| 33 | mutex_lock(&sl->master->mutex); | ||
| 34 | |||
| 35 | if (addr > DS2760_DATA_SIZE || addr < 0) { | ||
| 36 | count = 0; | ||
| 37 | goto out; | ||
| 38 | } | ||
| 39 | if (addr + count > DS2760_DATA_SIZE) | ||
| 40 | count = DS2760_DATA_SIZE - addr; | ||
| 41 | |||
| 42 | if (!w1_reset_select_slave(sl)) { | ||
| 43 | if (!io) { | ||
| 44 | w1_write_8(sl->master, W1_DS2760_READ_DATA); | ||
| 45 | w1_write_8(sl->master, addr); | ||
| 46 | count = w1_read_block(sl->master, buf, count); | ||
| 47 | } else { | ||
| 48 | w1_write_8(sl->master, W1_DS2760_WRITE_DATA); | ||
| 49 | w1_write_8(sl->master, addr); | ||
| 50 | w1_write_block(sl->master, buf, count); | ||
| 51 | /* XXX w1_write_block returns void, not n_written */ | ||
| 52 | } | ||
| 53 | } | ||
| 54 | |||
| 55 | out: | ||
| 56 | mutex_unlock(&sl->master->mutex); | ||
| 57 | |||
| 58 | return count; | ||
| 59 | } | ||
| 60 | |||
| 61 | int w1_ds2760_read(struct device *dev, char *buf, int addr, size_t count) | ||
| 62 | { | ||
| 63 | return w1_ds2760_io(dev, buf, addr, count, 0); | ||
| 64 | } | ||
| 65 | |||
| 66 | int w1_ds2760_write(struct device *dev, char *buf, int addr, size_t count) | ||
| 67 | { | ||
| 68 | return w1_ds2760_io(dev, buf, addr, count, 1); | ||
| 69 | } | ||
| 70 | |||
| 71 | static ssize_t w1_ds2760_read_bin(struct kobject *kobj, char *buf, loff_t off, | ||
| 72 | size_t count) | ||
| 73 | { | ||
| 74 | struct device *dev = container_of(kobj, struct device, kobj); | ||
| 75 | return w1_ds2760_read(dev, buf, off, count); | ||
| 76 | } | ||
| 77 | |||
| 78 | static struct bin_attribute w1_ds2760_bin_attr = { | ||
| 79 | .attr = { | ||
| 80 | .name = "w1_slave", | ||
| 81 | .mode = S_IRUGO, | ||
| 82 | .owner = THIS_MODULE, | ||
| 83 | }, | ||
| 84 | .size = DS2760_DATA_SIZE, | ||
| 85 | .read = w1_ds2760_read_bin, | ||
| 86 | }; | ||
| 87 | |||
| 88 | static DEFINE_IDR(bat_idr); | ||
| 89 | static DEFINE_MUTEX(bat_idr_lock); | ||
| 90 | |||
| 91 | static int new_bat_id(void) | ||
| 92 | { | ||
| 93 | int ret; | ||
| 94 | |||
| 95 | while (1) { | ||
| 96 | int id; | ||
| 97 | |||
| 98 | ret = idr_pre_get(&bat_idr, GFP_KERNEL); | ||
| 99 | if (ret == 0) | ||
| 100 | return -ENOMEM; | ||
| 101 | |||
| 102 | mutex_lock(&bat_idr_lock); | ||
| 103 | ret = idr_get_new(&bat_idr, NULL, &id); | ||
| 104 | mutex_unlock(&bat_idr_lock); | ||
| 105 | |||
| 106 | if (ret == 0) { | ||
| 107 | ret = id & MAX_ID_MASK; | ||
| 108 | break; | ||
| 109 | } else if (ret == -EAGAIN) { | ||
| 110 | continue; | ||
| 111 | } else { | ||
| 112 | break; | ||
| 113 | } | ||
| 114 | } | ||
| 115 | |||
| 116 | return ret; | ||
| 117 | } | ||
| 118 | |||
| 119 | static void release_bat_id(int id) | ||
| 120 | { | ||
| 121 | mutex_lock(&bat_idr_lock); | ||
| 122 | idr_remove(&bat_idr, id); | ||
| 123 | mutex_unlock(&bat_idr_lock); | ||
| 124 | |||
| 125 | return; | ||
| 126 | } | ||
| 127 | |||
| 128 | static int w1_ds2760_add_slave(struct w1_slave *sl) | ||
| 129 | { | ||
| 130 | int ret; | ||
| 131 | int id; | ||
| 132 | struct platform_device *pdev; | ||
| 133 | |||
| 134 | id = new_bat_id(); | ||
| 135 | if (id < 0) { | ||
| 136 | ret = id; | ||
| 137 | goto noid; | ||
| 138 | } | ||
| 139 | |||
| 140 | pdev = platform_device_alloc("ds2760-battery", id); | ||
| 141 | if (!pdev) { | ||
| 142 | ret = -ENOMEM; | ||
| 143 | goto pdev_alloc_failed; | ||
| 144 | } | ||
| 145 | pdev->dev.parent = &sl->dev; | ||
| 146 | |||
| 147 | ret = platform_device_add(pdev); | ||
| 148 | if (ret) | ||
| 149 | goto pdev_add_failed; | ||
| 150 | |||
| 151 | ret = sysfs_create_bin_file(&sl->dev.kobj, &w1_ds2760_bin_attr); | ||
| 152 | if (ret) | ||
| 153 | goto bin_attr_failed; | ||
| 154 | |||
| 155 | dev_set_drvdata(&sl->dev, pdev); | ||
| 156 | |||
| 157 | goto success; | ||
| 158 | |||
| 159 | bin_attr_failed: | ||
| 160 | pdev_add_failed: | ||
| 161 | platform_device_unregister(pdev); | ||
| 162 | pdev_alloc_failed: | ||
| 163 | release_bat_id(id); | ||
| 164 | noid: | ||
| 165 | success: | ||
| 166 | return ret; | ||
| 167 | } | ||
| 168 | |||
| 169 | static void w1_ds2760_remove_slave(struct w1_slave *sl) | ||
| 170 | { | ||
| 171 | struct platform_device *pdev = dev_get_drvdata(&sl->dev); | ||
| 172 | int id = pdev->id; | ||
| 173 | |||
| 174 | platform_device_unregister(pdev); | ||
| 175 | release_bat_id(id); | ||
| 176 | sysfs_remove_bin_file(&sl->dev.kobj, &w1_ds2760_bin_attr); | ||
| 177 | |||
| 178 | return; | ||
| 179 | } | ||
| 180 | |||
| 181 | static struct w1_family_ops w1_ds2760_fops = { | ||
| 182 | .add_slave = w1_ds2760_add_slave, | ||
| 183 | .remove_slave = w1_ds2760_remove_slave, | ||
| 184 | }; | ||
| 185 | |||
| 186 | static struct w1_family w1_ds2760_family = { | ||
| 187 | .fid = W1_FAMILY_DS2760, | ||
| 188 | .fops = &w1_ds2760_fops, | ||
| 189 | }; | ||
| 190 | |||
| 191 | static int __init w1_ds2760_init(void) | ||
| 192 | { | ||
| 193 | printk(KERN_INFO "1-Wire driver for the DS2760 battery monitor " | ||
| 194 | " chip - (c) 2004-2005, Szabolcs Gyurko\n"); | ||
| 195 | idr_init(&bat_idr); | ||
| 196 | return w1_register_family(&w1_ds2760_family); | ||
| 197 | } | ||
| 198 | |||
| 199 | static void __exit w1_ds2760_exit(void) | ||
| 200 | { | ||
| 201 | w1_unregister_family(&w1_ds2760_family); | ||
| 202 | idr_destroy(&bat_idr); | ||
| 203 | } | ||
| 204 | |||
| 205 | EXPORT_SYMBOL(w1_ds2760_read); | ||
| 206 | EXPORT_SYMBOL(w1_ds2760_write); | ||
| 207 | |||
| 208 | module_init(w1_ds2760_init); | ||
| 209 | module_exit(w1_ds2760_exit); | ||
| 210 | |||
| 211 | MODULE_LICENSE("GPL"); | ||
| 212 | MODULE_AUTHOR("Szabolcs Gyurko <szabolcs.gyurko@tlt.hu>"); | ||
| 213 | MODULE_DESCRIPTION("1-wire Driver Dallas 2760 battery monitor chip"); | ||
diff --git a/drivers/w1/slaves/w1_ds2760.h b/drivers/w1/slaves/w1_ds2760.h new file mode 100644 index 000000000000..f1302429cb02 --- /dev/null +++ b/drivers/w1/slaves/w1_ds2760.h | |||
| @@ -0,0 +1,50 @@ | |||
| 1 | /* | ||
| 2 | * 1-Wire implementation for the ds2760 chip | ||
| 3 | * | ||
| 4 | * Copyright © 2004-2005, Szabolcs Gyurko <szabolcs.gyurko@tlt.hu> | ||
| 5 | * | ||
| 6 | * Use consistent with the GNU GPL is permitted, | ||
| 7 | * provided that this copyright notice is | ||
| 8 | * preserved in its entirety in all copies and derived works. | ||
| 9 | * | ||
| 10 | */ | ||
| 11 | |||
| 12 | #ifndef __w1_ds2760_h__ | ||
| 13 | #define __w1_ds2760_h__ | ||
| 14 | |||
| 15 | /* Known commands to the DS2760 chip */ | ||
| 16 | #define W1_DS2760_SWAP 0xAA | ||
| 17 | #define W1_DS2760_READ_DATA 0x69 | ||
| 18 | #define W1_DS2760_WRITE_DATA 0x6C | ||
| 19 | #define W1_DS2760_COPY_DATA 0x48 | ||
| 20 | #define W1_DS2760_RECALL_DATA 0xB8 | ||
| 21 | #define W1_DS2760_LOCK 0x6A | ||
| 22 | |||
| 23 | /* Number of valid register addresses */ | ||
| 24 | #define DS2760_DATA_SIZE 0x40 | ||
| 25 | |||
| 26 | #define DS2760_PROTECTION_REG 0x00 | ||
| 27 | #define DS2760_STATUS_REG 0x01 | ||
| 28 | #define DS2760_EEPROM_REG 0x07 | ||
| 29 | #define DS2760_SPECIAL_FEATURE_REG 0x08 | ||
| 30 | #define DS2760_VOLTAGE_MSB 0x0c | ||
| 31 | #define DS2760_VOLTAGE_LSB 0x0d | ||
| 32 | #define DS2760_CURRENT_MSB 0x0e | ||
| 33 | #define DS2760_CURRENT_LSB 0x0f | ||
| 34 | #define DS2760_CURRENT_ACCUM_MSB 0x10 | ||
| 35 | #define DS2760_CURRENT_ACCUM_LSB 0x11 | ||
| 36 | #define DS2760_TEMP_MSB 0x18 | ||
| 37 | #define DS2760_TEMP_LSB 0x19 | ||
| 38 | #define DS2760_EEPROM_BLOCK0 0x20 | ||
| 39 | #define DS2760_ACTIVE_FULL 0x20 | ||
| 40 | #define DS2760_EEPROM_BLOCK1 0x30 | ||
| 41 | #define DS2760_RATED_CAPACITY 0x32 | ||
| 42 | #define DS2760_CURRENT_OFFSET_BIAS 0x33 | ||
| 43 | #define DS2760_ACTIVE_EMPTY 0x3b | ||
| 44 | |||
| 45 | extern int w1_ds2760_read(struct device *dev, char *buf, int addr, | ||
| 46 | size_t count); | ||
| 47 | extern int w1_ds2760_write(struct device *dev, char *buf, int addr, | ||
| 48 | size_t count); | ||
| 49 | |||
| 50 | #endif /* !__w1_ds2760_h__ */ | ||
diff --git a/drivers/w1/w1_family.h b/drivers/w1/w1_family.h index 1e2ac40c2c14..ef1e1dafa19a 100644 --- a/drivers/w1/w1_family.h +++ b/drivers/w1/w1_family.h | |||
| @@ -33,6 +33,7 @@ | |||
| 33 | #define W1_THERM_DS1822 0x22 | 33 | #define W1_THERM_DS1822 0x22 |
| 34 | #define W1_EEPROM_DS2433 0x23 | 34 | #define W1_EEPROM_DS2433 0x23 |
| 35 | #define W1_THERM_DS18B20 0x28 | 35 | #define W1_THERM_DS18B20 0x28 |
| 36 | #define W1_FAMILY_DS2760 0x30 | ||
| 36 | 37 | ||
| 37 | #define MAXNAMELEN 32 | 38 | #define MAXNAMELEN 32 |
| 38 | 39 | ||
