2 files changed, 8 insertions, 15 deletions

diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index d6047bd6805d..376d8e776936 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -5828,10 +5828,14 @@ static int tg3_reset_hw(struct tg3 *tp)
                           GRC_MODE_NO_TX_PHDR_CSUM |
                           GRC_MODE_NO_RX_PHDR_CSUM);
         tp->grc_mode |= GRC_MODE_HOST_SENDBDS;
-        if (tp->tg3_flags & TG3_FLAG_NO_TX_PSEUDO_CSUM)
-                tp->grc_mode |= GRC_MODE_NO_TX_PHDR_CSUM;
-        if (tp->tg3_flags & TG3_FLAG_NO_RX_PSEUDO_CSUM)
-                tp->grc_mode |= GRC_MODE_NO_RX_PHDR_CSUM;
+
+        /* Pseudo-header checksum is done by hardware logic and not
+         * the offload processers, so make the chip do the pseudo-
+         * header checksums on receive.  For transmit it is more
+         * convenient to do the pseudo-header checksum in software
+         * as Linux does that on transmit for us in all cases.
+         */
+        tp->grc_mode |= GRC_MODE_NO_TX_PHDR_CSUM;
 
         tw32(GRC_MODE,
              tp->grc_mode |
@@ -10303,15 +10307,6 @@ static int __devinit tg3_get_invariants(struct tg3 *tp)
         if (tp->pci_chip_rev_id == CHIPREV_ID_5700_B0)
                 tp->tg3_flags |= TG3_FLAG_BROKEN_CHECKSUMS;
 
-        /* Pseudo-header checksum is done by hardware logic and not
-         * the offload processers, so make the chip do the pseudo-
-         * header checksums on receive.  For transmit it is more
-         * convenient to do the pseudo-header checksum in software
-         * as Linux does that on transmit for us in all cases.
-         */
-        tp->tg3_flags |= TG3_FLAG_NO_TX_PSEUDO_CSUM;
-        tp->tg3_flags &= ~TG3_FLAG_NO_RX_PSEUDO_CSUM;
-
         /* Derive initial jumbo mode from MTU assigned in
          * ether_setup() via the alloc_etherdev() call
          */
diff --git a/drivers/net/tg3.h b/drivers/net/tg3.h
index c43cc3264202..b6484420e874 100644
--- a/drivers/net/tg3.h
+++ b/drivers/net/tg3.h
@@ -2171,8 +2171,6 @@ struct tg3 {
 #define TG3_FLAG_PCIX_MODE              0x00020000
 #define TG3_FLAG_PCI_HIGH_SPEED         0x00040000
 #define TG3_FLAG_PCI_32BIT              0x00080000
-#define TG3_FLAG_NO_TX_PSEUDO_CSUM      0x00100000
-#define TG3_FLAG_NO_RX_PSEUDO_CSUM      0x00200000
 #define TG3_FLAG_SERDES_WOL_CAP         0x00400000
 #define TG3_FLAG_JUMBO_RING_ENABLE      0x00800000
 #define TG3_FLAG_10_100_ONLY            0x01000000