diff options
| -rw-r--r-- | drivers/watchdog/Kconfig | 12 | ||||
| -rw-r--r-- | drivers/watchdog/Makefile | 1 | ||||
| -rw-r--r-- | drivers/watchdog/imx2_wdt.c | 358 |
3 files changed, 371 insertions, 0 deletions
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig index c57ecffe0085..afcfacc9bbe2 100644 --- a/drivers/watchdog/Kconfig +++ b/drivers/watchdog/Kconfig | |||
| @@ -312,6 +312,18 @@ config MAX63XX_WATCHDOG | |||
| 312 | help | 312 | help |
| 313 | Support for memory mapped max63{69,70,71,72,73,74} watchdog timer. | 313 | Support for memory mapped max63{69,70,71,72,73,74} watchdog timer. |
| 314 | 314 | ||
| 315 | config IMX2_WDT | ||
| 316 | tristate "IMX2+ Watchdog" | ||
| 317 | depends on ARCH_MX2 || ARCH_MX25 || ARCH_MX3 || ARCH_MX5 | ||
| 318 | help | ||
| 319 | This is the driver for the hardware watchdog | ||
| 320 | on the Freescale IMX2 and later processors. | ||
| 321 | If you have one of these processors and wish to have | ||
| 322 | watchdog support enabled, say Y, otherwise say N. | ||
| 323 | |||
| 324 | To compile this driver as a module, choose M here: the | ||
| 325 | module will be called imx2_wdt. | ||
| 326 | |||
| 315 | # AVR32 Architecture | 327 | # AVR32 Architecture |
| 316 | 328 | ||
| 317 | config AT32AP700X_WDT | 329 | config AT32AP700X_WDT |
diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile index 5e3cb95bb0e9..72f3e2073f8e 100644 --- a/drivers/watchdog/Makefile +++ b/drivers/watchdog/Makefile | |||
| @@ -47,6 +47,7 @@ obj-$(CONFIG_STMP3XXX_WATCHDOG) += stmp3xxx_wdt.o | |||
| 47 | obj-$(CONFIG_NUC900_WATCHDOG) += nuc900_wdt.o | 47 | obj-$(CONFIG_NUC900_WATCHDOG) += nuc900_wdt.o |
| 48 | obj-$(CONFIG_ADX_WATCHDOG) += adx_wdt.o | 48 | obj-$(CONFIG_ADX_WATCHDOG) += adx_wdt.o |
| 49 | obj-$(CONFIG_TS72XX_WATCHDOG) += ts72xx_wdt.o | 49 | obj-$(CONFIG_TS72XX_WATCHDOG) += ts72xx_wdt.o |
| 50 | obj-$(CONFIG_IMX2_WDT) += imx2_wdt.o | ||
| 50 | 51 | ||
| 51 | # AVR32 Architecture | 52 | # AVR32 Architecture |
| 52 | obj-$(CONFIG_AT32AP700X_WDT) += at32ap700x_wdt.o | 53 | obj-$(CONFIG_AT32AP700X_WDT) += at32ap700x_wdt.o |
diff --git a/drivers/watchdog/imx2_wdt.c b/drivers/watchdog/imx2_wdt.c new file mode 100644 index 000000000000..ea25885781bb --- /dev/null +++ b/drivers/watchdog/imx2_wdt.c | |||
| @@ -0,0 +1,358 @@ | |||
| 1 | /* | ||
| 2 | * Watchdog driver for IMX2 and later processors | ||
| 3 | * | ||
| 4 | * Copyright (C) 2010 Wolfram Sang, Pengutronix e.K. <w.sang@pengutronix.de> | ||
| 5 | * | ||
| 6 | * some parts adapted by similar drivers from Darius Augulis and Vladimir | ||
| 7 | * Zapolskiy, additional improvements by Wim Van Sebroeck. | ||
| 8 | * | ||
| 9 | * This program is free software; you can redistribute it and/or modify it | ||
| 10 | * under the terms of the GNU General Public License version 2 as published by | ||
| 11 | * the Free Software Foundation. | ||
| 12 | * | ||
| 13 | * NOTE: MX1 has a slightly different Watchdog than MX2 and later: | ||
| 14 | * | ||
| 15 | * MX1: MX2+: | ||
| 16 | * ---- ----- | ||
| 17 | * Registers: 32-bit 16-bit | ||
| 18 | * Stopable timer: Yes No | ||
| 19 | * Need to enable clk: No Yes | ||
| 20 | * Halt on suspend: Manual Can be automatic | ||
| 21 | */ | ||
| 22 | |||
| 23 | #include <linux/init.h> | ||
| 24 | #include <linux/kernel.h> | ||
| 25 | #include <linux/miscdevice.h> | ||
| 26 | #include <linux/module.h> | ||
| 27 | #include <linux/moduleparam.h> | ||
| 28 | #include <linux/platform_device.h> | ||
| 29 | #include <linux/watchdog.h> | ||
| 30 | #include <linux/clk.h> | ||
| 31 | #include <linux/fs.h> | ||
| 32 | #include <linux/io.h> | ||
| 33 | #include <linux/uaccess.h> | ||
| 34 | #include <linux/timer.h> | ||
| 35 | #include <linux/jiffies.h> | ||
| 36 | #include <mach/hardware.h> | ||
| 37 | |||
| 38 | #define DRIVER_NAME "imx2-wdt" | ||
| 39 | |||
| 40 | #define IMX2_WDT_WCR 0x00 /* Control Register */ | ||
| 41 | #define IMX2_WDT_WCR_WT (0xFF << 8) /* -> Watchdog Timeout Field */ | ||
| 42 | #define IMX2_WDT_WCR_WRE (1 << 3) /* -> WDOG Reset Enable */ | ||
| 43 | #define IMX2_WDT_WCR_WDE (1 << 2) /* -> Watchdog Enable */ | ||
| 44 | |||
| 45 | #define IMX2_WDT_WSR 0x02 /* Service Register */ | ||
| 46 | #define IMX2_WDT_SEQ1 0x5555 /* -> service sequence 1 */ | ||
| 47 | #define IMX2_WDT_SEQ2 0xAAAA /* -> service sequence 2 */ | ||
| 48 | |||
| 49 | #define IMX2_WDT_MAX_TIME 128 | ||
| 50 | #define IMX2_WDT_DEFAULT_TIME 60 /* in seconds */ | ||
| 51 | |||
| 52 | #define WDOG_SEC_TO_COUNT(s) ((s * 2 - 1) << 8) | ||
| 53 | |||
| 54 | #define IMX2_WDT_STATUS_OPEN 0 | ||
| 55 | #define IMX2_WDT_STATUS_STARTED 1 | ||
| 56 | #define IMX2_WDT_EXPECT_CLOSE 2 | ||
| 57 | |||
| 58 | static struct { | ||
| 59 | struct clk *clk; | ||
| 60 | void __iomem *base; | ||
| 61 | unsigned timeout; | ||
| 62 | unsigned long status; | ||
| 63 | struct timer_list timer; /* Pings the watchdog when closed */ | ||
| 64 | } imx2_wdt; | ||
| 65 | |||
| 66 | static struct miscdevice imx2_wdt_miscdev; | ||
| 67 | |||
| 68 | static int nowayout = WATCHDOG_NOWAYOUT; | ||
| 69 | module_param(nowayout, int, 0); | ||
| 70 | MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" | ||
| 71 | __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); | ||
| 72 | |||
| 73 | |||
| 74 | static unsigned timeout = IMX2_WDT_DEFAULT_TIME; | ||
| 75 | module_param(timeout, uint, 0); | ||
| 76 | MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds (default=" | ||
| 77 | __MODULE_STRING(IMX2_WDT_DEFAULT_TIME) ")"); | ||
| 78 | |||
| 79 | static const struct watchdog_info imx2_wdt_info = { | ||
| 80 | .identity = "imx2+ watchdog", | ||
| 81 | .options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE, | ||
| 82 | }; | ||
| 83 | |||
| 84 | static inline void imx2_wdt_setup(void) | ||
| 85 | { | ||
| 86 | u16 val = __raw_readw(imx2_wdt.base + IMX2_WDT_WCR); | ||
| 87 | |||
| 88 | /* Strip the old watchdog Time-Out value */ | ||
| 89 | val &= ~IMX2_WDT_WCR_WT; | ||
| 90 | /* Generate reset if WDOG times out */ | ||
| 91 | val &= ~IMX2_WDT_WCR_WRE; | ||
| 92 | /* Keep Watchdog Disabled */ | ||
| 93 | val &= ~IMX2_WDT_WCR_WDE; | ||
| 94 | /* Set the watchdog's Time-Out value */ | ||
| 95 | val |= WDOG_SEC_TO_COUNT(imx2_wdt.timeout); | ||
| 96 | |||
| 97 | __raw_writew(val, imx2_wdt.base + IMX2_WDT_WCR); | ||
| 98 | |||
| 99 | /* enable the watchdog */ | ||
| 100 | val |= IMX2_WDT_WCR_WDE; | ||
| 101 | __raw_writew(val, imx2_wdt.base + IMX2_WDT_WCR); | ||
| 102 | } | ||
| 103 | |||
| 104 | static inline void imx2_wdt_ping(void) | ||
| 105 | { | ||
| 106 | __raw_writew(IMX2_WDT_SEQ1, imx2_wdt.base + IMX2_WDT_WSR); | ||
| 107 | __raw_writew(IMX2_WDT_SEQ2, imx2_wdt.base + IMX2_WDT_WSR); | ||
| 108 | } | ||
| 109 | |||
| 110 | static void imx2_wdt_timer_ping(unsigned long arg) | ||
| 111 | { | ||
| 112 | /* ping it every imx2_wdt.timeout / 2 seconds to prevent reboot */ | ||
| 113 | imx2_wdt_ping(); | ||
| 114 | mod_timer(&imx2_wdt.timer, jiffies + imx2_wdt.timeout * HZ / 2); | ||
| 115 | } | ||
| 116 | |||
| 117 | static void imx2_wdt_start(void) | ||
| 118 | { | ||
| 119 | if (!test_and_set_bit(IMX2_WDT_STATUS_STARTED, &imx2_wdt.status)) { | ||
| 120 | /* at our first start we enable clock and do initialisations */ | ||
| 121 | clk_enable(imx2_wdt.clk); | ||
| 122 | |||
| 123 | imx2_wdt_setup(); | ||
| 124 | } else /* delete the timer that pings the watchdog after close */ | ||
| 125 | del_timer_sync(&imx2_wdt.timer); | ||
| 126 | |||
| 127 | /* Watchdog is enabled - time to reload the timeout value */ | ||
| 128 | imx2_wdt_ping(); | ||
| 129 | } | ||
| 130 | |||
| 131 | static void imx2_wdt_stop(void) | ||
| 132 | { | ||
| 133 | /* we don't need a clk_disable, it cannot be disabled once started. | ||
| 134 | * We use a timer to ping the watchdog while /dev/watchdog is closed */ | ||
| 135 | imx2_wdt_timer_ping(0); | ||
| 136 | } | ||
| 137 | |||
| 138 | static void imx2_wdt_set_timeout(int new_timeout) | ||
| 139 | { | ||
| 140 | u16 val = __raw_readw(imx2_wdt.base + IMX2_WDT_WCR); | ||
| 141 | |||
| 142 | /* set the new timeout value in the WSR */ | ||
| 143 | val &= ~IMX2_WDT_WCR_WT; | ||
| 144 | val |= WDOG_SEC_TO_COUNT(new_timeout); | ||
| 145 | __raw_writew(val, imx2_wdt.base + IMX2_WDT_WCR); | ||
| 146 | } | ||
| 147 | |||
| 148 | static int imx2_wdt_open(struct inode *inode, struct file *file) | ||
| 149 | { | ||
| 150 | if (test_and_set_bit(IMX2_WDT_STATUS_OPEN, &imx2_wdt.status)) | ||
| 151 | return -EBUSY; | ||
| 152 | |||
| 153 | imx2_wdt_start(); | ||
| 154 | return nonseekable_open(inode, file); | ||
| 155 | } | ||
| 156 | |||
| 157 | static int imx2_wdt_close(struct inode *inode, struct file *file) | ||
| 158 | { | ||
| 159 | if (test_bit(IMX2_WDT_EXPECT_CLOSE, &imx2_wdt.status) && !nowayout) | ||
| 160 | imx2_wdt_stop(); | ||
| 161 | else { | ||
| 162 | dev_crit(imx2_wdt_miscdev.parent, | ||
| 163 | "Unexpected close: Expect reboot!\n"); | ||
| 164 | imx2_wdt_ping(); | ||
| 165 | } | ||
| 166 | |||
| 167 | clear_bit(IMX2_WDT_EXPECT_CLOSE, &imx2_wdt.status); | ||
| 168 | clear_bit(IMX2_WDT_STATUS_OPEN, &imx2_wdt.status); | ||
| 169 | return 0; | ||
| 170 | } | ||
| 171 | |||
| 172 | static long imx2_wdt_ioctl(struct file *file, unsigned int cmd, | ||
| 173 | unsigned long arg) | ||
| 174 | { | ||
| 175 | void __user *argp = (void __user *)arg; | ||
| 176 | int __user *p = argp; | ||
| 177 | int new_value; | ||
| 178 | |||
| 179 | switch (cmd) { | ||
| 180 | case WDIOC_GETSUPPORT: | ||
| 181 | return copy_to_user(argp, &imx2_wdt_info, | ||
| 182 | sizeof(struct watchdog_info)) ? -EFAULT : 0; | ||
| 183 | |||
| 184 | case WDIOC_GETSTATUS: | ||
| 185 | case WDIOC_GETBOOTSTATUS: | ||
| 186 | return put_user(0, p); | ||
| 187 | |||
| 188 | case WDIOC_KEEPALIVE: | ||
| 189 | imx2_wdt_ping(); | ||
| 190 | return 0; | ||
| 191 | |||
| 192 | case WDIOC_SETTIMEOUT: | ||
| 193 | if (get_user(new_value, p)) | ||
| 194 | return -EFAULT; | ||
| 195 | if ((new_value < 1) || (new_value > IMX2_WDT_MAX_TIME)) | ||
| 196 | return -EINVAL; | ||
| 197 | imx2_wdt_set_timeout(new_value); | ||
| 198 | imx2_wdt.timeout = new_value; | ||
| 199 | imx2_wdt_ping(); | ||
| 200 | |||
| 201 | /* Fallthrough to return current value */ | ||
| 202 | case WDIOC_GETTIMEOUT: | ||
| 203 | return put_user(imx2_wdt.timeout, p); | ||
| 204 | |||
| 205 | default: | ||
| 206 | return -ENOTTY; | ||
| 207 | } | ||
| 208 | } | ||
| 209 | |||
| 210 | static ssize_t imx2_wdt_write(struct file *file, const char __user *data, | ||
| 211 | size_t len, loff_t *ppos) | ||
| 212 | { | ||
| 213 | size_t i; | ||
| 214 | char c; | ||
| 215 | |||
| 216 | if (len == 0) /* Can we see this even ? */ | ||
| 217 | return 0; | ||
| 218 | |||
| 219 | clear_bit(IMX2_WDT_EXPECT_CLOSE, &imx2_wdt.status); | ||
| 220 | /* scan to see whether or not we got the magic character */ | ||
| 221 | for (i = 0; i != len; i++) { | ||
| 222 | if (get_user(c, data + i)) | ||
| 223 | return -EFAULT; | ||
| 224 | if (c == 'V') | ||
| 225 | set_bit(IMX2_WDT_EXPECT_CLOSE, &imx2_wdt.status); | ||
| 226 | } | ||
| 227 | |||
| 228 | imx2_wdt_ping(); | ||
| 229 | return len; | ||
| 230 | } | ||
| 231 | |||
| 232 | static const struct file_operations imx2_wdt_fops = { | ||
| 233 | .owner = THIS_MODULE, | ||
| 234 | .llseek = no_llseek, | ||
| 235 | .unlocked_ioctl = imx2_wdt_ioctl, | ||
| 236 | .open = imx2_wdt_open, | ||
| 237 | .release = imx2_wdt_close, | ||
| 238 | .write = imx2_wdt_write, | ||
| 239 | }; | ||
| 240 | |||
| 241 | static struct miscdevice imx2_wdt_miscdev = { | ||
| 242 | .minor = WATCHDOG_MINOR, | ||
| 243 | .name = "watchdog", | ||
| 244 | .fops = &imx2_wdt_fops, | ||
| 245 | }; | ||
| 246 | |||
| 247 | static int __init imx2_wdt_probe(struct platform_device *pdev) | ||
| 248 | { | ||
| 249 | int ret; | ||
| 250 | int res_size; | ||
| 251 | struct resource *res; | ||
| 252 | |||
| 253 | res = platform_get_resource(pdev, IORESOURCE_MEM, 0); | ||
| 254 | if (!res) { | ||
| 255 | dev_err(&pdev->dev, "can't get device resources\n"); | ||
| 256 | return -ENODEV; | ||
| 257 | } | ||
| 258 | |||
| 259 | res_size = resource_size(res); | ||
| 260 | if (!devm_request_mem_region(&pdev->dev, res->start, res_size, | ||
| 261 | res->name)) { | ||
| 262 | dev_err(&pdev->dev, "can't allocate %d bytes at %d address\n", | ||
| 263 | res_size, res->start); | ||
| 264 | return -ENOMEM; | ||
| 265 | } | ||
| 266 | |||
| 267 | imx2_wdt.base = devm_ioremap_nocache(&pdev->dev, res->start, res_size); | ||
| 268 | if (!imx2_wdt.base) { | ||
| 269 | dev_err(&pdev->dev, "ioremap failed\n"); | ||
| 270 | return -ENOMEM; | ||
| 271 | } | ||
| 272 | |||
| 273 | imx2_wdt.clk = clk_get_sys("imx-wdt.0", NULL); | ||
| 274 | if (IS_ERR(imx2_wdt.clk)) { | ||
| 275 | dev_err(&pdev->dev, "can't get Watchdog clock\n"); | ||
| 276 | return PTR_ERR(imx2_wdt.clk); | ||
| 277 | } | ||
| 278 | |||
| 279 | imx2_wdt.timeout = clamp_t(unsigned, timeout, 1, IMX2_WDT_MAX_TIME); | ||
| 280 | if (imx2_wdt.timeout != timeout) | ||
| 281 | dev_warn(&pdev->dev, "Initial timeout out of range! " | ||
| 282 | "Clamped from %u to %u\n", timeout, imx2_wdt.timeout); | ||
| 283 | |||
| 284 | setup_timer(&imx2_wdt.timer, imx2_wdt_timer_ping, 0); | ||
| 285 | |||
| 286 | imx2_wdt_miscdev.parent = &pdev->dev; | ||
| 287 | ret = misc_register(&imx2_wdt_miscdev); | ||
| 288 | if (ret) | ||
| 289 | goto fail; | ||
| 290 | |||
| 291 | dev_info(&pdev->dev, | ||
| 292 | "IMX2+ Watchdog Timer enabled. timeout=%ds (nowayout=%d)\n", | ||
| 293 | imx2_wdt.timeout, nowayout); | ||
| 294 | return 0; | ||
| 295 | |||
| 296 | fail: | ||
| 297 | imx2_wdt_miscdev.parent = NULL; | ||
| 298 | clk_put(imx2_wdt.clk); | ||
| 299 | return ret; | ||
| 300 | } | ||
| 301 | |||
| 302 | static int __exit imx2_wdt_remove(struct platform_device *pdev) | ||
| 303 | { | ||
| 304 | misc_deregister(&imx2_wdt_miscdev); | ||
| 305 | |||
| 306 | if (test_bit(IMX2_WDT_STATUS_STARTED, &imx2_wdt.status)) { | ||
| 307 | del_timer_sync(&imx2_wdt.timer); | ||
| 308 | |||
| 309 | dev_crit(imx2_wdt_miscdev.parent, | ||
| 310 | "Device removed: Expect reboot!\n"); | ||
| 311 | } else | ||
| 312 | clk_put(imx2_wdt.clk); | ||
| 313 | |||
| 314 | imx2_wdt_miscdev.parent = NULL; | ||
| 315 | return 0; | ||
| 316 | } | ||
| 317 | |||
| 318 | static void imx2_wdt_shutdown(struct platform_device *pdev) | ||
| 319 | { | ||
| 320 | if (test_bit(IMX2_WDT_STATUS_STARTED, &imx2_wdt.status)) { | ||
| 321 | /* we are running, we need to delete the timer but will give | ||
| 322 | * max timeout before reboot will take place */ | ||
| 323 | del_timer_sync(&imx2_wdt.timer); | ||
| 324 | imx2_wdt_set_timeout(IMX2_WDT_MAX_TIME); | ||
| 325 | imx2_wdt_ping(); | ||
| 326 | |||
| 327 | dev_crit(imx2_wdt_miscdev.parent, | ||
| 328 | "Device shutdown: Expect reboot!\n"); | ||
| 329 | } | ||
| 330 | } | ||
| 331 | |||
| 332 | static struct platform_driver imx2_wdt_driver = { | ||
| 333 | .probe = imx2_wdt_probe, | ||
| 334 | .remove = __exit_p(imx2_wdt_remove), | ||
| 335 | .shutdown = imx2_wdt_shutdown, | ||
| 336 | .driver = { | ||
| 337 | .name = DRIVER_NAME, | ||
| 338 | .owner = THIS_MODULE, | ||
| 339 | }, | ||
| 340 | }; | ||
| 341 | |||
| 342 | static int __init imx2_wdt_init(void) | ||
| 343 | { | ||
| 344 | return platform_driver_probe(&imx2_wdt_driver, imx2_wdt_probe); | ||
| 345 | } | ||
| 346 | module_init(imx2_wdt_init); | ||
| 347 | |||
| 348 | static void __exit imx2_wdt_exit(void) | ||
| 349 | { | ||
| 350 | platform_driver_unregister(&imx2_wdt_driver); | ||
| 351 | } | ||
| 352 | module_exit(imx2_wdt_exit); | ||
| 353 | |||
| 354 | MODULE_AUTHOR("Wolfram Sang"); | ||
| 355 | MODULE_DESCRIPTION("Watchdog driver for IMX2 and later"); | ||
| 356 | MODULE_LICENSE("GPL v2"); | ||
| 357 | MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR); | ||
| 358 | MODULE_ALIAS("platform:" DRIVER_NAME); | ||
