28 files changed, 99 insertions, 95 deletions
diff --git a/Documentation/usb/gadget_serial.txt b/Documentation/usb/gadget_serial.txt
index 9b22bd14c348..eac7df94d8e3 100644
--- a/Documentation/usb/gadget_serial.txt
+++ b/Documentation/usb/gadget_serial.txt
@@ -114,11 +114,11 @@ modules.
 Then you must load the gadget serial driver.  To load it as an
 ACM device (recommended for interoperability), do this:
-  modprobe g_serial use_acm=1
+  modprobe g_serial
 To load it as a vendor specific bulk in/out device, do this:
-  modprobe g_serial
+  modprobe g_serial use_acm=0
 This will also automatically load the underlying gadget peripheral
 controller driver.  This must be done each time you reboot the gadget
diff --git a/Documentation/usb/proc_usb_info.txt b/Documentation/usb/proc_usb_info.txt
index 077e9032d0cd..fafcd4723260 100644
--- a/Documentation/usb/proc_usb_info.txt
+++ b/Documentation/usb/proc_usb_info.txt
@@ -49,8 +49,10 @@ it and 002/048 sometime later.
 These files can be read as binary data.  The binary data consists
 of first the device descriptor, then the descriptors for each
-configuration of the device.  That information is also shown in
+configuration of the device.  Multi-byte fields in the device and
-text form by the /proc/bus/usb/devices file, described later.
+configuration descriptors, but not other descriptors, are converted
+to host endianness by the kernel.  This information is also shown
+in text form by the /proc/bus/usb/devices file, described later.
 These files may also be used to write user-level drivers for the USB
 devices.  You would open the /proc/bus/usb/BBB/DDD file read/write,
diff --git a/Documentation/usb/usbmon.txt b/Documentation/usb/usbmon.txt
index 2917ce4ffdc4..270481906dc8 100644
--- a/Documentation/usb/usbmon.txt
+++ b/Documentation/usb/usbmon.txt
@@ -34,11 +34,12 @@ if usbmon is built into the kernel.
 Verify that bus sockets are present.
 # ls /sys/kernel/debug/usbmon
-0s  0t  0u  1s  1t  1u  2s  2t  2u  3s  3t  3u  4s  4t  4u
+0s  0u  1s  1t  1u  2s  2t  2u  3s  3t  3u  4s  4t  4u
 #
-Now you can choose to either use the sockets numbered '0' (to capture packets on
+Now you can choose to either use the socket '0u' (to capture packets on all
-all buses), and skip to step #3, or find the bus used by your device with step #2.
+buses), and skip to step #3, or find the bus used by your device with step #2.
+This allows to filter away annoying devices that talk continuously.
 2. Find which bus connects to the desired device
@@ -99,8 +100,9 @@ on the event type, but there is a set of words, common for all types.
 Here is the list of words, from left to right:
- URB Tag. This is used to identify URBs is normally a kernel mode address
+- URB Tag. This is used to identify URBs, and is normally an in-kernel address
- of the URB structure in hexadecimal.
+  of the URB structure in hexadecimal, but can be a sequence number or any
+  other unique string, within reason.
 - Timestamp in microseconds, a decimal number. The timestamp's resolution
  depends on available clock, and so it can be much worse than a microsecond
diff --git a/arch/powerpc/kernel/misc_32.S b/arch/powerpc/kernel/misc_32.S
index d108715129e2..5c33bc14bd9f 100644
--- a/arch/powerpc/kernel/misc_32.S
+++ b/arch/powerpc/kernel/misc_32.S
@@ -486,13 +486,13 @@ _GLOBAL(_tlbil_va)
        tlbsx   0,r3
        mfspr   r4,SPRN_MAS1            /* check valid */
        andis.  r3,r4,MAS1_VALID@h
-        beqlr
+        beq     1f
        rlwinm  r4,r4,0,1,31
        mtspr   SPRN_MAS1,r4
        tlbwe
        msync
        isync
-        wrtee   r10
+1:      wrtee   r10
        blr
 #endif /* CONFIG_FSL_BOOKE */
diff --git a/arch/powerpc/lib/rheap.c b/arch/powerpc/lib/rheap.c
index 29b2941cada0..45907c1dae66 100644
--- a/arch/powerpc/lib/rheap.c
+++ b/arch/powerpc/lib/rheap.c
@@ -556,6 +556,7 @@ unsigned long rh_alloc_fixed(rh_info_t * info, unsigned long start, int size, co
                be = blk->start + blk->size;
                if (s >= bs && e <= be)
                        break;
+                blk = NULL;
        }
        if (blk == NULL)
diff --git a/drivers/char/xilinx_hwicap/buffer_icap.c b/drivers/char/xilinx_hwicap/buffer_icap.c
index aa7f7962a9a0..05d897764f02 100644
--- a/drivers/char/xilinx_hwicap/buffer_icap.c
+++ b/drivers/char/xilinx_hwicap/buffer_icap.c
@@ -21,9 +21,6 @@
 *     INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
 *     FOR A PARTICULAR PURPOSE.
 *
- *     Xilinx products are not intended for use in life support appliances,
- *     devices, or systems. Use in such applications is expressly prohibited.
- *
 *     (c) Copyright 2003-2008 Xilinx Inc.
 *     All rights reserved.
 *
diff --git a/drivers/char/xilinx_hwicap/buffer_icap.h b/drivers/char/xilinx_hwicap/buffer_icap.h
index 8b0252bf06e2..d4f419ee87ab 100644
--- a/drivers/char/xilinx_hwicap/buffer_icap.h
+++ b/drivers/char/xilinx_hwicap/buffer_icap.h
@@ -21,9 +21,6 @@
 *     INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
 *     FOR A PARTICULAR PURPOSE.
 *
- *     Xilinx products are not intended for use in life support appliances,
- *     devices, or systems. Use in such applications is expressly prohibited.
- *
 *     (c) Copyright 2003-2008 Xilinx Inc.
 *     All rights reserved.
 *
diff --git a/drivers/char/xilinx_hwicap/fifo_icap.c b/drivers/char/xilinx_hwicap/fifo_icap.c
index 776b50528478..02225eb19cf6 100644
--- a/drivers/char/xilinx_hwicap/fifo_icap.c
+++ b/drivers/char/xilinx_hwicap/fifo_icap.c
@@ -21,9 +21,6 @@
 *     INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
 *     FOR A PARTICULAR PURPOSE.
 *
- *     Xilinx products are not intended for use in life support appliances,
- *     devices, or systems. Use in such applications is expressly prohibited.
- *
 *     (c) Copyright 2007-2008 Xilinx Inc.
 *     All rights reserved.
 *
diff --git a/drivers/char/xilinx_hwicap/fifo_icap.h b/drivers/char/xilinx_hwicap/fifo_icap.h
index 62bda453c90b..4c9dd9a3b62a 100644
--- a/drivers/char/xilinx_hwicap/fifo_icap.h
+++ b/drivers/char/xilinx_hwicap/fifo_icap.h
@@ -21,9 +21,6 @@
 *     INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
 *     FOR A PARTICULAR PURPOSE.
 *
- *     Xilinx products are not intended for use in life support appliances,
- *     devices, or systems. Use in such applications is expressly prohibited.
- *
 *     (c) Copyright 2007-2008 Xilinx Inc.
 *     All rights reserved.
 *
diff --git a/drivers/char/xilinx_hwicap/xilinx_hwicap.c b/drivers/char/xilinx_hwicap/xilinx_hwicap.c
index d16131949097..f40ab699860f 100644
--- a/drivers/char/xilinx_hwicap/xilinx_hwicap.c
+++ b/drivers/char/xilinx_hwicap/xilinx_hwicap.c
@@ -21,9 +21,6 @@
 *     INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
 *     FOR A PARTICULAR PURPOSE.
 *
- *     Xilinx products are not intended for use in life support appliances,
- *     devices, or systems. Use in such applications is expressly prohibited.
- *
 *     (c) Copyright 2002 Xilinx Inc., Systems Engineering Group
 *     (c) Copyright 2004 Xilinx Inc., Systems Engineering Group
 *     (c) Copyright 2007-2008 Xilinx Inc.
diff --git a/drivers/char/xilinx_hwicap/xilinx_hwicap.h b/drivers/char/xilinx_hwicap/xilinx_hwicap.h
index 24d0d9b938fb..8cca11981c5f 100644
--- a/drivers/char/xilinx_hwicap/xilinx_hwicap.h
+++ b/drivers/char/xilinx_hwicap/xilinx_hwicap.h
@@ -21,9 +21,6 @@
 *     INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
 *     FOR A PARTICULAR PURPOSE.
 *
- *     Xilinx products are not intended for use in life support appliances,
- *     devices, or systems. Use in such applications is expressly prohibited.
- *
 *     (c) Copyright 2003-2007 Xilinx Inc.
 *     All rights reserved.
 *
diff --git a/drivers/i2c/busses/i2c-cpm.c b/drivers/i2c/busses/i2c-cpm.c
index 228f75723063..3fcf78e906db 100644
--- a/drivers/i2c/busses/i2c-cpm.c
+++ b/drivers/i2c/busses/i2c-cpm.c
@@ -365,6 +365,7 @@ static int cpm_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
                pmsg = &msgs[tptr];
                if (pmsg->flags & I2C_M_RD)
                        ret = wait_event_interruptible_timeout(cpm->i2c_wait,
+                                (in_be16(&tbdf[tptr].cbd_sc) & BD_SC_NAK) ||
                                !(in_be16(&rbdf[rptr].cbd_sc) & BD_SC_EMPTY),
                                1 * HZ);
                else
diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c
index 1fac4e233133..b7434d24904e 100644
--- a/drivers/i2c/busses/i2c-s3c2410.c
+++ b/drivers/i2c/busses/i2c-s3c2410.c
@@ -56,6 +56,7 @@ enum s3c24xx_i2c_state {
 struct s3c24xx_i2c {
        spinlock_t              lock;
        wait_queue_head_t       wait;
+        unsigned int            suspended:1;
        struct i2c_msg          *msg;
        unsigned int            msg_num;
@@ -507,7 +508,7 @@ static int s3c24xx_i2c_doxfer(struct s3c24xx_i2c *i2c, struct i2c_msg *msgs, int
        unsigned long timeout;
        int ret;
-        if (!(readl(i2c->regs + S3C2410_IICCON) & S3C2410_IICCON_IRQEN))
+        if (i2c->suspended)
                return -EIO;
        ret = s3c24xx_i2c_set_master(i2c);
@@ -986,17 +987,26 @@ static int s3c24xx_i2c_remove(struct platform_device *pdev)
 }
 #ifdef CONFIG_PM
+static int s3c24xx_i2c_suspend_late(struct platform_device *dev,
+                                    pm_message_t msg)
+{
+        struct s3c24xx_i2c *i2c = platform_get_drvdata(dev);
+        i2c->suspended = 1;
+        return 0;
+}
 static int s3c24xx_i2c_resume(struct platform_device *dev)
 {
        struct s3c24xx_i2c *i2c = platform_get_drvdata(dev);
-        if (i2c != NULL)
+        i2c->suspended = 0;
-                s3c24xx_i2c_init(i2c);
+        s3c24xx_i2c_init(i2c);
        return 0;
 }
 #else
+#define s3c24xx_i2c_suspend_late NULL
 #define s3c24xx_i2c_resume NULL
 #endif
@@ -1005,6 +1015,7 @@ static int s3c24xx_i2c_resume(struct platform_device *dev)
 static struct platform_driver s3c2410_i2c_driver = {
        .probe          = s3c24xx_i2c_probe,
        .remove         = s3c24xx_i2c_remove,
+        .suspend_late   = s3c24xx_i2c_suspend_late,
        .resume         = s3c24xx_i2c_resume,
        .driver         = {
                .owner  = THIS_MODULE,
@@ -1015,6 +1026,7 @@ static struct platform_driver s3c2410_i2c_driver = {
 static struct platform_driver s3c2440_i2c_driver = {
        .probe          = s3c24xx_i2c_probe,
        .remove         = s3c24xx_i2c_remove,
+        .suspend_late   = s3c24xx_i2c_suspend_late,
        .resume         = s3c24xx_i2c_resume,
        .driver         = {
                .owner  = THIS_MODULE,
diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig
index c95b286a1239..5d457c96bd7e 100644
--- a/drivers/staging/Kconfig
+++ b/drivers/staging/Kconfig
@@ -22,6 +22,8 @@ menuconfig STAGING
          If in doubt, say N here.
+if STAGING
 config STAGING_EXCLUDE_BUILD
        bool "Exclude Staging drivers from being built" if STAGING
        default y
@@ -62,3 +64,4 @@ source "drivers/staging/at76_usb/Kconfig"
 source "drivers/staging/poch/Kconfig"
 endif # !STAGING_EXCLUDE_BUILD
+endif # STAGING
diff --git a/drivers/usb/class/usbtmc.c b/drivers/usb/class/usbtmc.c
index 8e74657f106c..43a863c5cc43 100644
--- a/drivers/usb/class/usbtmc.c
+++ b/drivers/usb/class/usbtmc.c
@@ -51,6 +51,7 @@ static struct usb_device_id usbtmc_devices[] = {
        { USB_INTERFACE_INFO(USB_CLASS_APP_SPEC, 3, 0), },
        { 0, } /* terminating entry */
 };
+MODULE_DEVICE_TABLE(usb, usbtmc_devices);
 /*
 * This structure is the capabilities for the device
diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c
index 3d7793d93031..8c081308b0e2 100644
--- a/drivers/usb/core/driver.c
+++ b/drivers/usb/core/driver.c
@@ -279,7 +279,9 @@ static int usb_unbind_interface(struct device *dev)
         * altsetting means creating new endpoint device entries).
         * When either of these happens, defer the Set-Interface.
         */
-        if (!error && intf->dev.power.status == DPM_ON)
+        if (intf->cur_altsetting->desc.bAlternateSetting == 0)
+                ;       /* Already in altsetting 0 so skip Set-Interface */
+        else if (!error && intf->dev.power.status == DPM_ON)
                usb_set_interface(udev, intf->altsetting[0].
                                desc.bInterfaceNumber, 0);
        else
diff --git a/drivers/usb/gadget/f_rndis.c b/drivers/usb/gadget/f_rndis.c
index 428b5993575a..3a8bb53fc473 100644
--- a/drivers/usb/gadget/f_rndis.c
+++ b/drivers/usb/gadget/f_rndis.c
@@ -651,6 +651,8 @@ rndis_bind(struct usb_configuration *c, struct usb_function *f)
                                fs_in_desc.bEndpointAddress;
                hs_out_desc.bEndpointAddress =
                                fs_out_desc.bEndpointAddress;
+                hs_notify_desc.bEndpointAddress =
+                                fs_notify_desc.bEndpointAddress;
                /* copy descriptors, and track endpoint copies */
                f->hs_descriptors = usb_copy_descriptors(eth_hs_function);
@@ -662,6 +664,8 @@ rndis_bind(struct usb_configuration *c, struct usb_function *f)
                                f->hs_descriptors, &hs_in_desc);
                rndis->hs.out = usb_find_endpoint(eth_hs_function,
                                f->hs_descriptors, &hs_out_desc);
+                rndis->hs.notify = usb_find_endpoint(eth_hs_function,
+                                f->hs_descriptors, &hs_notify_desc);
        }
        rndis->port.open = rndis_open;
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index aad1359a3eb1..fb6f2933b01b 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -143,6 +143,7 @@ static struct ftdi_sio_quirk ftdi_HE_TIRA1_quirk = {
 static struct usb_device_id id_table_combined [] = {
        { USB_DEVICE(FTDI_VID, FTDI_AMC232_PID) },
        { USB_DEVICE(FTDI_VID, FTDI_CANUSB_PID) },
+        { USB_DEVICE(FTDI_VID, FTDI_CANDAPTER_PID) },
        { USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_0_PID) },
        { USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_1_PID) },
        { USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_2_PID) },
@@ -166,6 +167,7 @@ static struct usb_device_id id_table_combined [] = {
        { USB_DEVICE(FTDI_VID, FTDI_OPENDCC_PID) },
        { USB_DEVICE(INTERBIOMETRICS_VID, INTERBIOMETRICS_IOBOARD_PID) },
        { USB_DEVICE(INTERBIOMETRICS_VID, INTERBIOMETRICS_MINI_IOBOARD_PID) },
+        { USB_DEVICE(FTDI_VID, FTDI_SPROG_II) },
        { USB_DEVICE(FTDI_VID, FTDI_XF_632_PID) },
        { USB_DEVICE(FTDI_VID, FTDI_XF_634_PID) },
        { USB_DEVICE(FTDI_VID, FTDI_XF_547_PID) },
diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h
index 07a3992abad2..373ee09975bb 100644
--- a/drivers/usb/serial/ftdi_sio.h
+++ b/drivers/usb/serial/ftdi_sio.h
@@ -40,6 +40,9 @@
 /* AlphaMicro Components AMC-232USB01 device */
 #define FTDI_AMC232_PID 0xFF00 /* Product Id */
+/* www.candapter.com Ewert Energy Systems CANdapter device */
+#define FTDI_CANDAPTER_PID 0x9F80 /* Product Id */
 /* SCS HF Radio Modems PID's (http://www.scs-ptc.com) */
 /* the VID is the standard ftdi vid (FTDI_VID) */
 #define FTDI_SCS_DEVICE_0_PID 0xD010    /* SCS PTC-IIusb */
@@ -75,6 +78,9 @@
 /* OpenDCC (www.opendcc.de) product id */
 #define FTDI_OPENDCC_PID        0xBFD8
+/* Sprog II (Andrew Crosland's SprogII DCC interface) */
+#define FTDI_SPROG_II           0xF0C8
 /* www.crystalfontz.com devices - thanx for providing free devices for evaluation ! */
 /* they use the ftdi chipset for the USB interface and the vendor id is the same */
 #define FTDI_XF_632_PID 0xFC08  /* 632: 16x2 Character Display */
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index 491c8857b644..1aed584be5eb 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -91,6 +91,8 @@ static struct usb_device_id id_table [] = {
        { USB_DEVICE(WS002IN_VENDOR_ID, WS002IN_PRODUCT_ID) },
        { USB_DEVICE(COREGA_VENDOR_ID, COREGA_PRODUCT_ID) },
        { USB_DEVICE(YCCABLE_VENDOR_ID, YCCABLE_PRODUCT_ID) },
+        { USB_DEVICE(SUPERIAL_VENDOR_ID, SUPERIAL_PRODUCT_ID) },
+        { USB_DEVICE(HP_VENDOR_ID, HP_LD220_PRODUCT_ID) },
        { }                                     /* Terminating entry */
 };
diff --git a/drivers/usb/serial/pl2303.h b/drivers/usb/serial/pl2303.h
index a3bd039c78e9..54974f446a8c 100644
--- a/drivers/usb/serial/pl2303.h
+++ b/drivers/usb/serial/pl2303.h
@@ -110,3 +110,11 @@
 /* Y.C. Cable U.S.A., Inc - USB to RS-232 */
 #define YCCABLE_VENDOR_ID       0x05ad
 #define YCCABLE_PRODUCT_ID      0x0fba
+/* "Superial" USB - Serial */
+#define SUPERIAL_VENDOR_ID      0x5372
+#define SUPERIAL_PRODUCT_ID     0x2303
+/* Hewlett-Packard LD220-HP POS Pole Display */
+#define HP_VENDOR_ID            0x03f0
+#define HP_LD220_PRODUCT_ID     0x3524
diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c
index 31c42d1cae13..01d0c70d60e9 100644
--- a/drivers/usb/serial/ti_usb_3410_5052.c
+++ b/drivers/usb/serial/ti_usb_3410_5052.c
@@ -16,56 +16,6 @@
 * For questions or problems with this driver, contact Texas Instruments
 * technical support, or Al Borchers <alborchers@steinerpoint.com>, or
 * Peter Berger <pberger@brimson.com>.
- *
- * This driver needs this hotplug script in /etc/hotplug/usb/ti_usb_3410_5052
- * or in /etc/hotplug.d/usb/ti_usb_3410_5052.hotplug to set the device
- * configuration.
- *
- * #!/bin/bash
- *
- * BOOT_CONFIG=1
- * ACTIVE_CONFIG=2
- *
- * if [[ "$ACTION" != "add" ]]
- * then
- *      exit
- * fi
- *
- * CONFIG_PATH=/sys${DEVPATH%/?*}/bConfigurationValue
- *
- * if [[ 0`cat $CONFIG_PATH` -ne $BOOT_CONFIG ]]
- * then
- *      exit
- * fi
- *
- * PRODUCT=${PRODUCT%/?*}               # delete version
- * VENDOR_ID=`printf "%d" 0x${PRODUCT%/?*}`
- * PRODUCT_ID=`printf "%d" 0x${PRODUCT#*?/}`
- *
- * PARAM_PATH=/sys/module/ti_usb_3410_5052/parameters
- *
- * function scan() {
- *      s=$1
- *      shift
- *      for i
- *      do
- *              if [[ $s -eq $i ]]
- *              then
- *                      return 0
- *              fi
- *      done
- *      return 1
- * }
- *
- * IFS=$IFS,
- *
- * if (scan $VENDOR_ID 1105 `cat $PARAM_PATH/vendor_3410` &&
- * scan $PRODUCT_ID 13328 `cat $PARAM_PATH/product_3410`) ||
- * (scan $VENDOR_ID 1105 `cat $PARAM_PATH/vendor_5052` &&
- * scan $PRODUCT_ID 20562 20818 20570 20575 `cat $PARAM_PATH/product_5052`)
- * then
- *      echo $ACTIVE_CONFIG > $CONFIG_PATH
- * fi
 */
 #include <linux/kernel.h>
@@ -457,9 +407,10 @@ static int ti_startup(struct usb_serial *serial)
                goto free_tdev;
        }
-        /* the second configuration must be set (in sysfs by hotplug script) */
+        /* the second configuration must be set */
        if (dev->actconfig->desc.bConfigurationValue == TI_BOOT_CONFIG) {
-                status = -ENODEV;
+                status = usb_driver_set_configuration(dev, TI_ACTIVE_CONFIG);
+                status = status ? status : -ENODEV;
                goto free_tdev;
        }
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index e61f2bfc64ad..bfcc1fe82518 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -167,8 +167,22 @@ UNUSUAL_DEV(  0x0421, 0x005d, 0x0001, 0x0600,
                US_SC_DEVICE, US_PR_DEVICE, NULL,
                US_FL_FIX_CAPACITY ),
+/* Reported by Ozan Sener <themgzzy@gmail.com> */
+UNUSUAL_DEV(  0x0421, 0x0060, 0x0551, 0x0551,
+                "Nokia",
+                "3500c",
+                US_SC_DEVICE, US_PR_DEVICE, NULL,
+                US_FL_FIX_CAPACITY ),
+/* Reported by CSECSY Laszlo <boobaa@frugalware.org> */
+UNUSUAL_DEV(  0x0421, 0x0063, 0x0001, 0x0601,
+                "Nokia",
+                "Nokia 3109c",
+                US_SC_DEVICE, US_PR_DEVICE, NULL,
+                US_FL_FIX_CAPACITY ),
 /* Patch for Nokia 5310 capacity */
-UNUSUAL_DEV(  0x0421, 0x006a, 0x0000, 0x0591,
+UNUSUAL_DEV(  0x0421, 0x006a, 0x0000, 0x0701,
                "Nokia",
                "5310",
                US_SC_DEVICE, US_PR_DEVICE, NULL,
diff --git a/fs/cifs/cifssmb.c b/fs/cifs/cifssmb.c
index 2af8626ced43..6d51696dc762 100644
--- a/fs/cifs/cifssmb.c
+++ b/fs/cifs/cifssmb.c
@@ -3983,7 +3983,8 @@ parse_DFS_referrals(TRANSACTION2_GET_DFS_REFER_RSP *pSMBr,
                node->flags = le16_to_cpu(pSMBr->DFSFlags);
                if (is_unicode) {
-                        __le16 *tmp = kmalloc(strlen(searchName)*2, GFP_KERNEL);
+                        __le16 *tmp = kmalloc(strlen(searchName)*2 + 2,
+                                                GFP_KERNEL);
                        cifsConvertToUCS((__le16 *) tmp, searchName,
                                        PATH_MAX, nls_codepage, remap);
                        node->path_consumed = hostlen_fromUCS(tmp,
diff --git a/fs/ocfs2/ocfs2_fs.h b/fs/ocfs2/ocfs2_fs.h
index 5f180cf7abbd..5e0c0d0aef7d 100644
--- a/fs/ocfs2/ocfs2_fs.h
+++ b/fs/ocfs2/ocfs2_fs.h
@@ -86,7 +86,8 @@
 #define OCFS2_CLEAR_INCOMPAT_FEATURE(sb,mask)                   \
        OCFS2_SB(sb)->s_feature_incompat &= ~(mask)
-#define OCFS2_FEATURE_COMPAT_SUPP       OCFS2_FEATURE_COMPAT_BACKUP_SB
+#define OCFS2_FEATURE_COMPAT_SUPP       (OCFS2_FEATURE_COMPAT_BACKUP_SB \
+                                         | OCFS2_FEATURE_COMPAT_JBD2_SB)
 #define OCFS2_FEATURE_INCOMPAT_SUPP     (OCFS2_FEATURE_INCOMPAT_LOCAL_MOUNT \
                                         | OCFS2_FEATURE_INCOMPAT_SPARSE_ALLOC \
                                         | OCFS2_FEATURE_INCOMPAT_INLINE_DATA \
@@ -153,6 +154,11 @@
 #define OCFS2_FEATURE_COMPAT_BACKUP_SB          0x0001
 /*
+ * The filesystem will correctly handle journal feature bits.
+ */
+#define OCFS2_FEATURE_COMPAT_JBD2_SB            0x0002
+/*
 * Unwritten extents support.
 */
 #define OCFS2_FEATURE_RO_COMPAT_UNWRITTEN       0x0001
diff --git a/fs/ocfs2/xattr.c b/fs/ocfs2/xattr.c
index 054e2efb0b7e..74d7367ade13 100644
--- a/fs/ocfs2/xattr.c
+++ b/fs/ocfs2/xattr.c
@@ -2645,9 +2645,9 @@ static int ocfs2_xattr_update_xattr_search(struct inode *inode,
                                return ret;
                        }
-                        i = xs->here - old_xh->xh_entries;
-                        xs->here = &xs->header->xh_entries[i];
                }
+                i = xs->here - old_xh->xh_entries;
+                xs->here = &xs->header->xh_entries[i];
        }
        return ret;
diff --git a/include/linux/usb/ch9.h b/include/linux/usb/ch9.h
index 73a2f4eb1f7a..9b42baed3900 100644
--- a/include/linux/usb/ch9.h
+++ b/include/linux/usb/ch9.h
@@ -158,8 +158,12 @@ struct usb_ctrlrequest {
 * (rarely) accepted by SET_DESCRIPTOR.
 *
 * Note that all multi-byte values here are encoded in little endian
- * byte order "on the wire".  But when exposed through Linux-USB APIs,
+ * byte order "on the wire".  Within the kernel and when exposed
- * they've been converted to cpu byte order.
+ * through the Linux-USB APIs, they are not converted to cpu byte
+ * order; it is the responsibility of the client code to do this.
+ * The single exception is when device and configuration descriptors (but
+ * not other descriptors) are read from usbfs (i.e. /proc/bus/usb/BBB/DDD);
+ * in this case the fields are converted to host endianness by the kernel.
 */
 /*
diff --git a/lib/dynamic_printk.c b/lib/dynamic_printk.c
index d83660fd6fdd..8e30295e8566 100644
--- a/lib/dynamic_printk.c
+++ b/lib/dynamic_printk.c
@@ -135,7 +135,7 @@ int unregister_dynamic_debug_module(char *mod_name)
        nr_entries--;
 out:
        up(&debug_list_mutex);
-        return 0;
+        return ret;
 }
 EXPORT_SYMBOL_GPL(unregister_dynamic_debug_module);
@@ -289,7 +289,7 @@ static ssize_t pr_debug_write(struct file *file, const char __user *buf,
                                        dynamic_enabled = DYNAMIC_ENABLED_SOME;
                                        err = 0;
                                        printk(KERN_DEBUG
-                                               "debugging enabled for module %s",
+                                               "debugging enabled for module %s\n",
                                               elem->name);
                                } else if (!value && (elem->enable == 1)) {
                                        elem->enable = 0;
@@ -309,7 +309,7 @@ static ssize_t pr_debug_write(struct file *file, const char __user *buf,
                                        err = 0;
                                        printk(KERN_DEBUG
                                               "debugging disabled for module "
-                                               "%s", elem->name);
+                                               "%s\n", elem->name);
                                }
                        }
                }