5 files changed, 36 insertions, 35 deletions

diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index 54e5cc0dd5f8..fb610c3634a4 100644
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -41,6 +41,7 @@
 #include <linux/serial.h>
 #include <linux/serial_8250.h>
 #include <linux/nmi.h>
+#include <linux/mutex.h>
 
 #include <asm/io.h>
 #include <asm/irq.h>
@@ -2467,7 +2468,7 @@ static struct platform_device *serial8250_isa_devs;
  * 16x50 serial ports to be configured at run-time, to support PCMCIA
  * modems and PCI multiport cards.
  */
-static DECLARE_MUTEX(serial_sem);
+static DEFINE_MUTEX(serial_mutex);
 
 static struct uart_8250_port *serial8250_find_match_or_unused(struct uart_port *port)
 {
@@ -2522,7 +2523,7 @@ int serial8250_register_port(struct uart_port *port)
         if (port->uartclk == 0)
                 return -EINVAL;
 
-        down(&serial_sem);
+        mutex_lock(&serial_mutex);
 
         uart = serial8250_find_match_or_unused(port);
         if (uart) {
@@ -2544,7 +2545,7 @@ int serial8250_register_port(struct uart_port *port)
                 if (ret == 0)
                         ret = uart->port.line;
         }
-        up(&serial_sem);
+        mutex_unlock(&serial_mutex);
 
         return ret;
 }
@@ -2561,7 +2562,7 @@ void serial8250_unregister_port(int line)
 {
         struct uart_8250_port *uart = &serial8250_ports[line];
 
-        down(&serial_sem);
+        mutex_lock(&serial_mutex);
         uart_remove_one_port(&serial8250_reg, &uart->port);
         if (serial8250_isa_devs) {
                 uart->port.flags &= ~UPF_BOOT_AUTOCONF;
@@ -2571,7 +2572,7 @@ void serial8250_unregister_port(int line)
         } else {
                 uart->port.dev = NULL;
         }
-        up(&serial_sem);
+        mutex_unlock(&serial_mutex);
 }
 EXPORT_SYMBOL(serial8250_unregister_port);
 
diff --git a/drivers/serial/crisv10.c b/drivers/serial/crisv10.c
index 08c42c000188..be12623d8544 100644
--- a/drivers/serial/crisv10.c
+++ b/drivers/serial/crisv10.c
@@ -442,6 +442,7 @@ static char *serial_version = "$Revision: 1.25 $";
 #include <linux/init.h>
 #include <asm/uaccess.h>
 #include <linux/kernel.h>
+#include <linux/mutex.h>
 
 #include <asm/io.h>
 #include <asm/irq.h>
@@ -1315,11 +1316,7 @@ static const struct control_pins e100_modem_pins[NR_PORTS] =
  * memory if large numbers of serial ports are open.
  */
 static unsigned char *tmp_buf;
-#ifdef DECLARE_MUTEX
-static DECLARE_MUTEX(tmp_buf_sem);
-#else
-static struct semaphore tmp_buf_sem = MUTEX;
-#endif
+static DEFINE_MUTEX(tmp_buf_mutex);
 
 /* Calculate the chartime depending on baudrate, numbor of bits etc. */
 static void update_char_time(struct e100_serial * info)
@@ -3661,7 +3658,7 @@ rs_raw_write(struct tty_struct * tty, int from_user,
          * design.
          */
         if (from_user) {
-                down(&tmp_buf_sem);
+                mutex_lock(&tmp_buf_mutex);
                 while (1) {
                         int c1;
                         c = CIRC_SPACE_TO_END(info->xmit.head,
@@ -3692,7 +3689,7 @@ rs_raw_write(struct tty_struct * tty, int from_user,
                         count -= c;
                         ret += c;
                 }
-                up(&tmp_buf_sem);
+                mutex_unlock(&tmp_buf_mutex);
         } else {
                 cli();
                 while (count) {
diff --git a/drivers/serial/pmac_zilog.c b/drivers/serial/pmac_zilog.c
index f330d6c0e0df..5f52883e64d2 100644
--- a/drivers/serial/pmac_zilog.c
+++ b/drivers/serial/pmac_zilog.c
@@ -60,6 +60,7 @@
 #include <linux/pmu.h>
 #include <linux/bitops.h>
 #include <linux/sysrq.h>
+#include <linux/mutex.h>
 #include <asm/sections.h>
 #include <asm/io.h>
 #include <asm/irq.h>
@@ -96,7 +97,7 @@ MODULE_LICENSE("GPL");
  */
 static struct uart_pmac_port    pmz_ports[MAX_ZS_PORTS];
 static int                      pmz_ports_count;
-static DECLARE_MUTEX(pmz_irq_sem);
+static DEFINE_MUTEX(pmz_irq_mutex);
 
 static struct uart_driver pmz_uart_reg = {
         .owner          =       THIS_MODULE,
@@ -922,7 +923,7 @@ static int pmz_startup(struct uart_port *port)
         if (uap->node == NULL)
                 return -ENODEV;
 
-        down(&pmz_irq_sem);
+        mutex_lock(&pmz_irq_mutex);
 
         uap->flags |= PMACZILOG_FLAG_IS_OPEN;
 
@@ -940,11 +941,11 @@ static int pmz_startup(struct uart_port *port)
                 dev_err(&uap->dev->ofdev.dev,
                         "Unable to register zs interrupt handler.\n");
                 pmz_set_scc_power(uap, 0);
-                up(&pmz_irq_sem);
+                mutex_unlock(&pmz_irq_mutex);
                 return -ENXIO;
         }
 
-        up(&pmz_irq_sem);
+        mutex_unlock(&pmz_irq_mutex);
 
         /* Right now, we deal with delay by blocking here, I'll be
          * smarter later on
@@ -981,7 +982,7 @@ static void pmz_shutdown(struct uart_port *port)
         if (uap->node == NULL)
                 return;
 
-        down(&pmz_irq_sem);
+        mutex_lock(&pmz_irq_mutex);
 
         /* Release interrupt handler */
         free_irq(uap->port.irq, uap);
@@ -1002,7 +1003,7 @@ static void pmz_shutdown(struct uart_port *port)
 
         if (ZS_IS_CONS(uap) || ZS_IS_ASLEEP(uap)) {
                 spin_unlock_irqrestore(&port->lock, flags);
-                up(&pmz_irq_sem);
+                mutex_unlock(&pmz_irq_mutex);
                 return;
         }
 
@@ -1019,7 +1020,7 @@ static void pmz_shutdown(struct uart_port *port)
 
         spin_unlock_irqrestore(&port->lock, flags);
 
-        up(&pmz_irq_sem);
+        mutex_unlock(&pmz_irq_mutex);
 
         pmz_debug("pmz: shutdown() done.\n");
 }
@@ -1591,7 +1592,7 @@ static int pmz_suspend(struct macio_dev *mdev, pm_message_t pm_state)
 
         state = pmz_uart_reg.state + uap->port.line;
 
-        down(&pmz_irq_sem);
+        mutex_lock(&pmz_irq_mutex);
         down(&state->sem);
 
         spin_lock_irqsave(&uap->port.lock, flags);
@@ -1624,7 +1625,7 @@ static int pmz_suspend(struct macio_dev *mdev, pm_message_t pm_state)
         pmz_set_scc_power(uap, 0);
 
         up(&state->sem);
-        up(&pmz_irq_sem);
+        mutex_unlock(&pmz_irq_mutex);
 
         pmz_debug("suspend, switching complete\n");
 
@@ -1651,7 +1652,7 @@ static int pmz_resume(struct macio_dev *mdev)
 
         state = pmz_uart_reg.state + uap->port.line;
 
-        down(&pmz_irq_sem);
+        mutex_lock(&pmz_irq_mutex);
         down(&state->sem);
 
         spin_lock_irqsave(&uap->port.lock, flags);
@@ -1685,7 +1686,7 @@ static int pmz_resume(struct macio_dev *mdev)
 
  bail:
         up(&state->sem);
-        up(&pmz_irq_sem);
+        mutex_unlock(&pmz_irq_mutex);
 
         /* Right now, we deal with delay by blocking here, I'll be
          * smarter later on
diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c
index 9589509fc5bd..2ca620900bcc 100644
--- a/drivers/serial/serial_core.c
+++ b/drivers/serial/serial_core.c
@@ -33,6 +33,7 @@
 #include <linux/device.h>
 #include <linux/serial.h> /* for serial_state and serial_icounter_struct */
 #include <linux/delay.h>
+#include <linux/mutex.h>
 
 #include <asm/irq.h>
 #include <asm/uaccess.h>
@@ -47,7 +48,7 @@
 /*
  * This is used to lock changes in serial line configuration.
  */
-static DECLARE_MUTEX(port_sem);
+static DEFINE_MUTEX(port_mutex);
 
 #define HIGH_BITS_OFFSET        ((sizeof(long)-sizeof(int))*8)
 
@@ -1472,7 +1473,7 @@ static struct uart_state *uart_get(struct uart_driver *drv, int line)
 {
         struct uart_state *state;
 
-        down(&port_sem);
+        mutex_lock(&port_mutex);
         state = drv->state + line;
         if (down_interruptible(&state->sem)) {
                 state = ERR_PTR(-ERESTARTSYS);
@@ -1509,7 +1510,7 @@ static struct uart_state *uart_get(struct uart_driver *drv, int line)
         }
 
  out:
-        up(&port_sem);
+        mutex_unlock(&port_mutex);
         return state;
 }
 
@@ -2219,7 +2220,7 @@ int uart_add_one_port(struct uart_driver *drv, struct uart_port *port)
 
         state = drv->state + port->line;
 
-        down(&port_sem);
+        mutex_lock(&port_mutex);
         if (state->port) {
                 ret = -EINVAL;
                 goto out;
@@ -2255,7 +2256,7 @@ int uart_add_one_port(struct uart_driver *drv, struct uart_port *port)
                 register_console(port->cons);
 
  out:
-        up(&port_sem);
+        mutex_unlock(&port_mutex);
 
         return ret;
 }
@@ -2279,7 +2280,7 @@ int uart_remove_one_port(struct uart_driver *drv, struct uart_port *port)
                 printk(KERN_ALERT "Removing wrong port: %p != %p\n",
                         state->port, port);
 
-        down(&port_sem);
+        mutex_lock(&port_mutex);
 
         /*
          * Remove the devices from devfs
@@ -2288,7 +2289,7 @@ int uart_remove_one_port(struct uart_driver *drv, struct uart_port *port)
 
         uart_unconfigure_port(drv, state);
         state->port = NULL;
-        up(&port_sem);
+        mutex_unlock(&port_mutex);
 
         return 0;
 }
diff --git a/drivers/serial/serial_txx9.c b/drivers/serial/serial_txx9.c
index fdd1f1915a42..ee98a867bc6d 100644
--- a/drivers/serial/serial_txx9.c
+++ b/drivers/serial/serial_txx9.c
@@ -52,6 +52,7 @@
 #include <linux/tty_flip.h>
 #include <linux/serial_core.h>
 #include <linux/serial.h>
+#include <linux/mutex.h>
 
 #include <asm/io.h>
 #include <asm/irq.h>
@@ -1018,7 +1019,7 @@ static void serial_txx9_resume_port(int line)
         uart_resume_port(&serial_txx9_reg, &serial_txx9_ports[line].port);
 }
 
-static DECLARE_MUTEX(serial_txx9_sem);
+static DEFINE_MUTEX(serial_txx9_mutex);
 
 /**
  *      serial_txx9_register_port - register a serial port
@@ -1037,7 +1038,7 @@ static int __devinit serial_txx9_register_port(struct uart_port *port)
         struct uart_txx9_port *uart;
         int ret = -ENOSPC;
 
-        down(&serial_txx9_sem);
+        mutex_lock(&serial_txx9_mutex);
         for (i = 0; i < UART_NR; i++) {
                 uart = &serial_txx9_ports[i];
                 if (uart->port.type == PORT_UNKNOWN)
@@ -1058,7 +1059,7 @@ static int __devinit serial_txx9_register_port(struct uart_port *port)
                 if (ret == 0)
                         ret = uart->port.line;
         }
-        up(&serial_txx9_sem);
+        mutex_unlock(&serial_txx9_mutex);
         return ret;
 }
 
@@ -1073,7 +1074,7 @@ static void __devexit serial_txx9_unregister_port(int line)
 {
         struct uart_txx9_port *uart = &serial_txx9_ports[line];
 
-        down(&serial_txx9_sem);
+        mutex_lock(&serial_txx9_mutex);
         uart_remove_one_port(&serial_txx9_reg, &uart->port);
         uart->port.flags = 0;
         uart->port.type = PORT_UNKNOWN;
@@ -1082,7 +1083,7 @@ static void __devexit serial_txx9_unregister_port(int line)
         uart->port.membase = 0;
         uart->port.dev = NULL;
         uart_add_one_port(&serial_txx9_reg, &uart->port);
-        up(&serial_txx9_sem);
+        mutex_unlock(&serial_txx9_mutex);
 }
 
 /*