5 files changed, 199 insertions, 5 deletions

diff --git a/Documentation/acpi/dsdt-initrd.txt b/Documentation/acpi/dsdt-initrd.txt
new file mode 100644
index 000000000000..736043359dfb
--- /dev/null
+++ b/Documentation/acpi/dsdt-initrd.txt
@@ -0,0 +1,99 @@
+ACPI Custom DSDT read from initramfs
+
+2003 by Markus Gaugusch < dsdt at gaugusch dot at >
+Special thanks go to Thomas Renninger from SuSE, who updated the patch for
+2.6.0 and later modified it to read inside initramfs
+2004 - 2008 maintained by Eric Piel < eric dot piel at tremplin-utc dot net >
+
+This option is intended for people who would like to hack their DSDT and don't
+want to recompile their kernel after every change. It can also be useful to
+distros which offers pre-compiled kernels and want to allow their users to use
+a modified DSDT. In the Kernel config, enable the initial RAM filesystem
+support (in General Setup) and enable ACPI_CUSTOM_DSDT_INITRD at the ACPI
+options (General Setup|ACPI Support|Read Custom DSDT from initramfs).
+
+A custom DSDT (Differentiated System Description Table) is useful when your
+computer uses ACPI but problems occur due to broken implementation. Typically,
+your computer works but there are some troubles with the hardware detection or
+the power management. You can check that troubles come from errors in the DSDT by
+activating the ACPI debug option and reading the logs. This table is provided
+by the BIOS, therefore it might be a good idea to check for BIOS update on your
+vendor website before going any further. Errors are often caused by vendors
+testing their hardware only with Windows or because there is code which is
+executed only on a specific OS with a specific version and Linux hasn't been
+considered during the development.
+
+Before you run away from customising your DSDT, you should note that already
+corrected tables are available for a fair amount of computers on this web-page:
+http://acpi.sf.net/dsdt . Be careful though, to work correctly a DSDT has to
+match closely the hardware, including the amount of RAM, the frequency of the
+processor and the PCI cards present! If you are part of the unluckies who
+cannot find their hardware in this database, you can modify your DSDT by
+yourself. This process is less painful than it sounds. Download the Intel ASL
+compiler/decompiler at http://www.intel.com/technology/IAPC/acpi/downloads.htm .
+As root, you then have to dump your DSDT and decompile it. By using the
+compiler messages as well as the kernel ACPI debug messages and the reference
+book (available at the Intel website and also at http://www.acpi.info), it is
+quite easy to obtain a fully working table.
+
+Once your new DSDT is ready you'll have to add it to an initramfs so that the
+kernel can read the table at the very beginning of the boot. As the file has to
+be accessed very early during the boot process the initramfs has to be an
+initramfs. The file is contained into the initramfs under the name /DSDT.aml .
+To obtain such an initramfs, you might have to modify your initramfs script or
+you can add it later to the initramfs with the script appended to this
+document. The command will look like:
+initramfs-add-dsdt initramfs.img my-dsdt.aml
+
+In case you don't use any initramfs, the possibilities you have are to either
+start using one (try mkinitrd or yaird), or use the "Include Custom DSDT"
+configure option to directly include your DSDT inside the kernel.
+
+The message "Looking for DSDT in initramfs..." will tell you if the DSDT was
+found or not. If you need to update your DSDT, generate a new initramfs and
+perform the steps above. Don't forget that with Lilo, you'll have to re-run it.
+
+
+====================== Here starts initramfs-add-dsdt ==========================
+#!/bin/bash
+# Adds a DSDT file to the initrd (if it's an initramfs)
+# first argument is the name of archive
+# second argument is the name of the file to add
+# The file will be copied as /DSDT.aml
+
+# 20060126: fix "Premature end of file" with some old cpio (Roland Robic)
+# 20060205: this time it should really work
+
+# check the arguments
+if [ $# -ne 2 ]; then
+        program_name=$(basename $0)
+        echo "\
+$program_name: too few arguments
+Usage: $program_name initrd-name.img DSDT-to-add.aml
+Adds a DSDT file to an initrd (in initramfs format)
+
+  initrd-name.img: filename of the initrd in initramfs format
+  DSDT-to-add.aml: filename of the DSDT file to add
+  " 1>&2
+    exit 1
+fi
+
+# we should check it's an initramfs
+
+tempcpio=$(mktemp -d)
+# cleanup on exit, hangup, interrupt, quit, termination
+trap 'rm -rf $tempcpio' 0 1 2 3 15
+
+# extract the archive
+gunzip -c "$1" > "$tempcpio"/initramfs.cpio || exit 1
+
+# copy the DSDT file at the root of the directory so that we can call it "/DSDT.aml"
+cp -f "$2" "$tempcpio"/DSDT.aml
+
+# add the file
+cd "$tempcpio"
+(echo DSDT.aml | cpio --quiet -H newc -o -A -O "$tempcpio"/initramfs.cpio) || exit 1
+cd "$OLDPWD"
+
+# re-compress the archive
+gzip -c "$tempcpio"/initramfs.cpio > "$1"
diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig
index ccf6ea95f68c..0442ae153a24 100644
--- a/drivers/acpi/Kconfig
+++ b/drivers/acpi/Kconfig
@@ -274,6 +274,23 @@ config ACPI_CUSTOM_DSDT_FILE
           Enter the full path name to the file which includes the AmlCode
           declaration.
 
+config ACPI_CUSTOM_DSDT_INITRD
+        bool "Read Custom DSDT from initramfs"
+        depends on BLK_DEV_INITRD
+        default n
+        help
+          The DSDT (Differentiated System Description Table) often needs to be
+          overridden because of broken BIOS implementations. If this feature is
+          activated you will be able to provide a customized DSDT by adding it
+          to your initramfs. If your mkinitrd tool does not support this feature
+          a script is provided in the documentation. For more details see
+          <file:Documentation/dsdt-initrd.txt> or <http://gaugusch.at/kernel.shtml>.
+          If there is no table found, it will fall-back to the custom DSDT
+          in-kernel (if activated) or to the DSDT from the BIOS.
+
+          Even if you do not need a new one at the moment, you may want to use a
+          better DSDT later. It is safe to say Y here.
+
 config ACPI_BLACKLIST_YEAR
         int "Disable ACPI for systems before Jan 1st this year" if X86_32
         default 0
diff --git a/drivers/acpi/osl.c b/drivers/acpi/osl.c
index e53fb516f9d4..131936e7ff17 100644
--- a/drivers/acpi/osl.c
+++ b/drivers/acpi/osl.c
@@ -312,6 +312,66 @@ acpi_os_predefined_override(const struct acpi_predefined_names *init_val,
         return AE_OK;
 }
 
+#ifdef CONFIG_ACPI_CUSTOM_DSDT_INITRD
+struct acpi_table_header *acpi_find_dsdt_initrd(void)
+{
+        struct file *firmware_file;
+        mm_segment_t oldfs;
+        unsigned long len, len2;
+        struct acpi_table_header *dsdt_buffer, *ret = NULL;
+        struct kstat stat;
+        char *ramfs_dsdt_name = "/DSDT.aml";
+
+        printk(KERN_INFO PREFIX "Looking for DSDT in initramfs... ");
+
+        /*
+         * Never do this at home, only the user-space is allowed to open a file.
+         * The clean way would be to use the firmware loader. But this code must be run
+         * before there is any userspace available. So we need a static/init firmware
+         * infrastructure, which doesn't exist yet...
+         */
+        if (vfs_stat(ramfs_dsdt_name, &stat) < 0) {
+                printk("not found.\n");
+                return ret;
+        }
+
+        len = stat.size;
+        /* check especially against empty files */
+        if (len <= 4) {
+                printk("error, file is too small: only %lu bytes.\n", len);
+                return ret;
+        }
+
+        firmware_file = filp_open(ramfs_dsdt_name, O_RDONLY, 0);
+        if (IS_ERR(firmware_file)) {
+                printk("error, could not open file %s.\n", ramfs_dsdt_name);
+                return ret;
+        }
+
+        dsdt_buffer = ACPI_ALLOCATE(len);
+        if (!dsdt_buffer) {
+                printk("error when allocating %lu bytes of memory.\n", len);
+                goto err;
+        }
+
+        oldfs = get_fs();
+        set_fs(KERNEL_DS);
+        len2 = vfs_read(firmware_file, (char __user *)dsdt_buffer, len, &firmware_file->f_pos);
+        set_fs(oldfs);
+        if (len2 < len) {
+                printk("error trying to read %lu bytes from %s.\n", len, ramfs_dsdt_name);
+                ACPI_FREE(dsdt_buffer);
+                goto err;
+        }
+
+        printk("successfully read %lu bytes from %s.\n", len, ramfs_dsdt_name);
+        ret = dsdt_buffer;
+err:
+        filp_close(firmware_file, NULL);
+        return ret;
+}
+#endif
+
 acpi_status
 acpi_os_table_override(struct acpi_table_header * existing_table,
                        struct acpi_table_header ** new_table)
@@ -319,13 +379,18 @@ acpi_os_table_override(struct acpi_table_header * existing_table,
         if (!existing_table || !new_table)
                 return AE_BAD_PARAMETER;
 
+        *new_table = NULL;
+
 #ifdef CONFIG_ACPI_CUSTOM_DSDT
         if (strncmp(existing_table->signature, "DSDT", 4) == 0)
                 *new_table = (struct acpi_table_header *)AmlCode;
-        else
-                *new_table = NULL;
-#else
-        *new_table = NULL;
+#endif
+#ifdef CONFIG_ACPI_CUSTOM_DSDT_INITRD
+        if (strncmp(existing_table->signature, "DSDT", 4) == 0) {
+                struct acpi_table_header *initrd_table = acpi_find_dsdt_initrd();
+                if (initrd_table)
+                        *new_table = initrd_table;
+        }
 #endif
         return AE_OK;
 }
diff --git a/init/initramfs.c b/init/initramfs.c
index d53fee8d8604..c0b1e0533d80 100644
--- a/init/initramfs.c
+++ b/init/initramfs.c
@@ -538,7 +538,7 @@ skip:
         initrd_end = 0;
 }
 
-static int __init populate_rootfs(void)
+int __init populate_rootfs(void)
 {
         char *err = unpack_to_rootfs(__initramfs_start,
                          __initramfs_end - __initramfs_start, 0);
@@ -577,4 +577,10 @@ static int __init populate_rootfs(void)
         }
         return 0;
 }
+#ifndef CONFIG_ACPI_CUSTOM_DSDT_INITRD
+/*
+ * if this option is enabled, populate_rootfs() is called _earlier_ in the
+ * boot sequence. This insures that the ACPI initialisation can find the file.
+ */
 rootfs_initcall(populate_rootfs);
+#endif
diff --git a/init/main.c b/init/main.c
index c691f5f7fc27..2a78932f6c07 100644
--- a/init/main.c
+++ b/init/main.c
@@ -102,6 +102,12 @@ static inline void mark_rodata_ro(void) { }
 extern void tc_init(void);
 #endif
 
+#ifdef CONFIG_ACPI_CUSTOM_DSDT_INITRD
+extern int populate_rootfs(void);
+#else
+static inline void populate_rootfs(void) {}
+#endif
+
 enum system_states system_state;
 EXPORT_SYMBOL(system_state);
 
@@ -648,6 +654,7 @@ asmlinkage void __init start_kernel(void)
 
         check_bugs();
 
+        populate_rootfs(); /* For DSDT override from initramfs */
         acpi_early_init(); /* before LAPIC and SMP init */
 
         /* Do the rest non-__init'ed, we're now alive */