23 files changed, 229 insertions, 131 deletions

diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c
index 2ba9ab953731..04f1d29cba2c 100644
--- a/arch/arm/mach-omap1/clock.c
+++ b/arch/arm/mach-omap1/clock.c
@@ -214,8 +214,8 @@ int omap1_select_table_rate(struct clk *clk, unsigned long rate)
         struct mpu_rate * ptr;
         unsigned long dpll1_rate, ref_rate;
 
-        dpll1_rate = clk_get_rate(ck_dpll1_p);
-        ref_rate = clk_get_rate(ck_ref_p);
+        dpll1_rate = ck_dpll1_p->rate;
+        ref_rate = ck_ref_p->rate;
 
         for (ptr = omap1_rate_table; ptr->rate; ptr++) {
                 if (ptr->xtal != ref_rate)
@@ -306,7 +306,7 @@ long omap1_round_to_table_rate(struct clk *clk, unsigned long rate)
         long highest_rate;
         unsigned long ref_rate;
 
-        ref_rate = clk_get_rate(ck_ref_p);
+        ref_rate = ck_ref_p->rate;
 
         highest_rate = -EINVAL;
 
diff --git a/arch/arm/mach-omap2/clock34xx_data.c b/arch/arm/mach-omap2/clock34xx_data.c
index c6031d74d6f6..74930e3158e3 100644
--- a/arch/arm/mach-omap2/clock34xx_data.c
+++ b/arch/arm/mach-omap2/clock34xx_data.c
@@ -671,7 +671,6 @@ static struct clk dpll4_m3x2_ck = {
         .name           = "dpll4_m3x2_ck",
         .ops            = &clkops_omap2_dflt_wait,
         .parent         = &dpll4_m3_ck,
-        .init           = &omap2_init_clksel_parent,
         .enable_reg     = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
         .enable_bit     = OMAP3430_PWRDN_TV_SHIFT,
         .flags          = INVERT_ENABLE,
@@ -811,7 +810,6 @@ static struct clk dpll4_m6x2_ck = {
         .name           = "dpll4_m6x2_ck",
         .ops            = &clkops_omap2_dflt_wait,
         .parent         = &dpll4_m6_ck,
-        .init           = &omap2_init_clksel_parent,
         .enable_reg     = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
         .enable_bit     = OMAP3430_PWRDN_EMU_PERIPH_SHIFT,
         .flags          = INVERT_ENABLE,
@@ -1047,7 +1045,6 @@ static struct clk iva2_ck = {
         .name           = "iva2_ck",
         .ops            = &clkops_omap2_dflt_wait,
         .parent         = &dpll2_m2_ck,
-        .init           = &omap2_init_clksel_parent,
         .enable_reg     = OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, CM_FCLKEN),
         .enable_bit     = OMAP3430_CM_FCLKEN_IVA2_EN_IVA2_SHIFT,
         .clkdm_name     = "iva2_clkdm",
@@ -1121,7 +1118,6 @@ static struct clk gfx_l3_ck = {
         .name           = "gfx_l3_ck",
         .ops            = &clkops_omap2_dflt_wait,
         .parent         = &l3_ick,
-        .init           = &omap2_init_clksel_parent,
         .enable_reg     = OMAP_CM_REGADDR(GFX_MOD, CM_ICLKEN),
         .enable_bit     = OMAP_EN_GFX_SHIFT,
         .recalc         = &followparent_recalc,
diff --git a/arch/arm/mach-omap2/clock44xx_data.c b/arch/arm/mach-omap2/clock44xx_data.c
index 2210e227d78a..9d882bcb56e3 100644
--- a/arch/arm/mach-omap2/clock44xx_data.c
+++ b/arch/arm/mach-omap2/clock44xx_data.c
@@ -346,37 +346,37 @@ static struct clk aess_fclk = {
 };
 
 static const struct clksel_rate div31_1to31_rates[] = {
-        { .div = 1, .val = 0, .flags = RATE_IN_4430 },
-        { .div = 2, .val = 1, .flags = RATE_IN_4430 },
-        { .div = 3, .val = 2, .flags = RATE_IN_4430 },
-        { .div = 4, .val = 3, .flags = RATE_IN_4430 },
-        { .div = 5, .val = 4, .flags = RATE_IN_4430 },
-        { .div = 6, .val = 5, .flags = RATE_IN_4430 },
-        { .div = 7, .val = 6, .flags = RATE_IN_4430 },
-        { .div = 8, .val = 7, .flags = RATE_IN_4430 },
-        { .div = 9, .val = 8, .flags = RATE_IN_4430 },
-        { .div = 10, .val = 9, .flags = RATE_IN_4430 },
-        { .div = 11, .val = 10, .flags = RATE_IN_4430 },
-        { .div = 12, .val = 11, .flags = RATE_IN_4430 },
-        { .div = 13, .val = 12, .flags = RATE_IN_4430 },
-        { .div = 14, .val = 13, .flags = RATE_IN_4430 },
-        { .div = 15, .val = 14, .flags = RATE_IN_4430 },
-        { .div = 16, .val = 15, .flags = RATE_IN_4430 },
-        { .div = 17, .val = 16, .flags = RATE_IN_4430 },
-        { .div = 18, .val = 17, .flags = RATE_IN_4430 },
-        { .div = 19, .val = 18, .flags = RATE_IN_4430 },
-        { .div = 20, .val = 19, .flags = RATE_IN_4430 },
-        { .div = 21, .val = 20, .flags = RATE_IN_4430 },
-        { .div = 22, .val = 21, .flags = RATE_IN_4430 },
-        { .div = 23, .val = 22, .flags = RATE_IN_4430 },
-        { .div = 24, .val = 23, .flags = RATE_IN_4430 },
-        { .div = 25, .val = 24, .flags = RATE_IN_4430 },
-        { .div = 26, .val = 25, .flags = RATE_IN_4430 },
-        { .div = 27, .val = 26, .flags = RATE_IN_4430 },
-        { .div = 28, .val = 27, .flags = RATE_IN_4430 },
-        { .div = 29, .val = 28, .flags = RATE_IN_4430 },
-        { .div = 30, .val = 29, .flags = RATE_IN_4430 },
-        { .div = 31, .val = 30, .flags = RATE_IN_4430 },
+        { .div = 1, .val = 1, .flags = RATE_IN_4430 },
+        { .div = 2, .val = 2, .flags = RATE_IN_4430 },
+        { .div = 3, .val = 3, .flags = RATE_IN_4430 },
+        { .div = 4, .val = 4, .flags = RATE_IN_4430 },
+        { .div = 5, .val = 5, .flags = RATE_IN_4430 },
+        { .div = 6, .val = 6, .flags = RATE_IN_4430 },
+        { .div = 7, .val = 7, .flags = RATE_IN_4430 },
+        { .div = 8, .val = 8, .flags = RATE_IN_4430 },
+        { .div = 9, .val = 9, .flags = RATE_IN_4430 },
+        { .div = 10, .val = 10, .flags = RATE_IN_4430 },
+        { .div = 11, .val = 11, .flags = RATE_IN_4430 },
+        { .div = 12, .val = 12, .flags = RATE_IN_4430 },
+        { .div = 13, .val = 13, .flags = RATE_IN_4430 },
+        { .div = 14, .val = 14, .flags = RATE_IN_4430 },
+        { .div = 15, .val = 15, .flags = RATE_IN_4430 },
+        { .div = 16, .val = 16, .flags = RATE_IN_4430 },
+        { .div = 17, .val = 17, .flags = RATE_IN_4430 },
+        { .div = 18, .val = 18, .flags = RATE_IN_4430 },
+        { .div = 19, .val = 19, .flags = RATE_IN_4430 },
+        { .div = 20, .val = 20, .flags = RATE_IN_4430 },
+        { .div = 21, .val = 21, .flags = RATE_IN_4430 },
+        { .div = 22, .val = 22, .flags = RATE_IN_4430 },
+        { .div = 23, .val = 23, .flags = RATE_IN_4430 },
+        { .div = 24, .val = 24, .flags = RATE_IN_4430 },
+        { .div = 25, .val = 25, .flags = RATE_IN_4430 },
+        { .div = 26, .val = 26, .flags = RATE_IN_4430 },
+        { .div = 27, .val = 27, .flags = RATE_IN_4430 },
+        { .div = 28, .val = 28, .flags = RATE_IN_4430 },
+        { .div = 29, .val = 29, .flags = RATE_IN_4430 },
+        { .div = 30, .val = 30, .flags = RATE_IN_4430 },
+        { .div = 31, .val = 31, .flags = RATE_IN_4430 },
         { .div = 0 },
 };
 
diff --git a/arch/arm/mach-omap2/cpuidle34xx.c b/arch/arm/mach-omap2/cpuidle34xx.c
index a26d6a08ae3f..12f0cbfc2894 100644
--- a/arch/arm/mach-omap2/cpuidle34xx.c
+++ b/arch/arm/mach-omap2/cpuidle34xx.c
@@ -137,7 +137,7 @@ return_sleep_time:
         local_irq_enable();
         local_fiq_enable();
 
-        return (u32)timespec_to_ns(&ts_idle)/1000;
+        return ts_idle.tv_nsec / NSEC_PER_USEC + ts_idle.tv_sec * USEC_PER_SEC;
 }
 
 /**
diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c
index bd8cb5974726..3f1334f62e7a 100644
--- a/arch/arm/mach-omap2/gpmc.c
+++ b/arch/arm/mach-omap2/gpmc.c
@@ -534,6 +534,8 @@ void __init gpmc_init(void)
                 BUG();
         }
 
+        clk_enable(gpmc_l3_clk);
+
         l = gpmc_read_reg(GPMC_REVISION);
         printk(KERN_INFO "GPMC revision %d.%d\n", (l >> 4) & 0x0f, l & 0x0f);
         /* Set smart idle mode and automatic L3 clock gating */
diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c
index a091b53657b9..3d65c50bd017 100644
--- a/arch/arm/mach-omap2/id.c
+++ b/arch/arm/mach-omap2/id.c
@@ -188,6 +188,8 @@ void __init omap3_check_revision(void)
         u16 hawkeye;
         u8 rev;
 
+        omap_chip.oc = CHIP_IS_OMAP3430;
+
         /*
          * We cannot access revision registers on ES1.0.
          * If the processor type is Cortex-A8 and the revision is 0x0
@@ -196,6 +198,7 @@ void __init omap3_check_revision(void)
         cpuid = read_cpuid(CPUID_ID);
         if ((((cpuid >> 4) & 0xfff) == 0xc08) && ((cpuid & 0xf) == 0x0)) {
                 omap_revision = OMAP3430_REV_ES1_0;
+                omap_chip.oc |= CHIP_IS_OMAP3430ES1;
                 return;
         }
 
@@ -216,18 +219,28 @@ void __init omap3_check_revision(void)
                 case 0: /* Take care of early samples */
                 case 1:
                         omap_revision = OMAP3430_REV_ES2_0;
+                        omap_chip.oc |= CHIP_IS_OMAP3430ES2;
                         break;
                 case 2:
                         omap_revision = OMAP3430_REV_ES2_1;
+                        omap_chip.oc |= CHIP_IS_OMAP3430ES2;
                         break;
                 case 3:
                         omap_revision = OMAP3430_REV_ES3_0;
+                        omap_chip.oc |= CHIP_IS_OMAP3430ES3_0;
                         break;
                 case 4:
+                        omap_revision = OMAP3430_REV_ES3_1;
+                        omap_chip.oc |= CHIP_IS_OMAP3430ES3_1;
+                        break;
+                case 7:
                 /* FALLTHROUGH */
                 default:
                         /* Use the latest known revision as default */
-                        omap_revision = OMAP3430_REV_ES3_1;
+                        omap_revision = OMAP3430_REV_ES3_1_2;
+
+                        /* REVISIT: Add CHIP_IS_OMAP3430ES3_1_2? */
+                        omap_chip.oc |= CHIP_IS_OMAP3430ES3_1;
                 }
                 break;
         case 0xb868:
@@ -235,14 +248,18 @@ void __init omap3_check_revision(void)
                  *
                  * Set the device to be OMAP3505 here. Actual device
                  * is identified later based on the features.
+                 *
+                 * REVISIT: AM3505/AM3517 should have their own CHIP_IS
                  */
                 omap_revision = OMAP3505_REV(rev);
+                omap_chip.oc |= CHIP_IS_OMAP3430ES3_1;
                 break;
         case 0xb891:
         /* FALLTHROUGH */
         default:
                 /* Unknown default to latest silicon rev as default*/
                 omap_revision = OMAP3630_REV_ES1_0;
+                omap_chip.oc |= CHIP_IS_OMAP3630ES1;
         }
 }
 
@@ -360,6 +377,7 @@ void __init omap2_check_revision(void)
                 omap3_check_revision();
                 omap3_check_features();
                 omap3_cpuinfo();
+                return;
         } else if (cpu_is_omap44xx()) {
                 omap4_check_revision();
                 return;
@@ -374,27 +392,14 @@ void __init omap2_check_revision(void)
         if (cpu_is_omap243x()) {
                 /* Currently only supports 2430ES2.1 and 2430-all */
                 omap_chip.oc |= CHIP_IS_OMAP2430;
+                return;
         } else if (cpu_is_omap242x()) {
                 /* Currently only supports 2420ES2.1.1 and 2420-all */
                 omap_chip.oc |= CHIP_IS_OMAP2420;
-        } else if (cpu_is_omap3505() || cpu_is_omap3517()) {
-                omap_chip.oc = CHIP_IS_OMAP3430 | CHIP_IS_OMAP3430ES3_1;
-        } else if (cpu_is_omap343x()) {
-                omap_chip.oc = CHIP_IS_OMAP3430;
-                if (omap_rev() == OMAP3430_REV_ES1_0)
-                        omap_chip.oc |= CHIP_IS_OMAP3430ES1;
-                else if (omap_rev() >= OMAP3430_REV_ES2_0 &&
-                         omap_rev() <= OMAP3430_REV_ES2_1)
-                        omap_chip.oc |= CHIP_IS_OMAP3430ES2;
-                else if (omap_rev() == OMAP3430_REV_ES3_0)
-                        omap_chip.oc |= CHIP_IS_OMAP3430ES3_0;
-                else if (omap_rev() == OMAP3430_REV_ES3_1)
-                        omap_chip.oc |= CHIP_IS_OMAP3430ES3_1;
-                else if (omap_rev() == OMAP3630_REV_ES1_0)
-                        omap_chip.oc |= CHIP_IS_OMAP3630ES1;
-        } else {
-                pr_err("Uninitialized omap_chip, please fix!\n");
+                return;
         }
+
+        pr_err("Uninitialized omap_chip, please fix!\n");
 }
 
 /*
diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c
index e9bc782fa414..27054025da2b 100644
--- a/arch/arm/mach-omap2/irq.c
+++ b/arch/arm/mach-omap2/irq.c
@@ -274,4 +274,22 @@ void omap_intc_restore_context(void)
         }
         /* MIRs are saved and restore with other PRCM registers */
 }
+
+void omap3_intc_suspend(void)
+{
+        /* A pending interrupt would prevent OMAP from entering suspend */
+        omap_ack_irq(0);
+}
+
+void omap3_intc_prepare_idle(void)
+{
+        /* Disable autoidle as it can stall interrupt controller */
+        intc_bank_write_reg(0, &irq_banks[0], INTC_SYSCONFIG);
+}
+
+void omap3_intc_resume_idle(void)
+{
+        /* Re-enable autoidle */
+        intc_bank_write_reg(1, &irq_banks[0], INTC_SYSCONFIG);
+}
 #endif /* CONFIG_ARCH_OMAP3 */
diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c
index 459ef23ab8a8..3f59bd12cbbf 100644
--- a/arch/arm/mach-omap2/mux.c
+++ b/arch/arm/mach-omap2/mux.c
@@ -51,7 +51,7 @@ struct omap_mux_entry {
 static unsigned long mux_phys;
 static void __iomem *mux_base;
 
-static inline u16 omap_mux_read(u16 reg)
+u16 omap_mux_read(u16 reg)
 {
         if (cpu_is_omap24xx())
                 return __raw_readb(mux_base + reg);
@@ -59,7 +59,7 @@ static inline u16 omap_mux_read(u16 reg)
                 return __raw_readw(mux_base + reg);
 }
 
-static inline void omap_mux_write(u16 val, u16 reg)
+void omap_mux_write(u16 val, u16 reg)
 {
         if (cpu_is_omap24xx())
                 __raw_writeb(val, mux_base + reg);
@@ -67,6 +67,14 @@ static inline void omap_mux_write(u16 val, u16 reg)
                 __raw_writew(val, mux_base + reg);
 }
 
+void omap_mux_write_array(struct omap_board_mux *board_mux)
+{
+        while (board_mux->reg_offset !=  OMAP_MUX_TERMINATOR) {
+                omap_mux_write(board_mux->value, board_mux->reg_offset);
+                board_mux++;
+        }
+}
+
 #if defined(CONFIG_ARCH_OMAP24XX) && defined(CONFIG_OMAP_MUX)
 
 static struct omap_mux_cfg arch_mux_cfg;
@@ -833,14 +841,6 @@ static void __init omap_mux_set_cmdline_signals(void)
         kfree(options);
 }
 
-static void __init omap_mux_set_board_signals(struct omap_board_mux *board_mux)
-{
-        while (board_mux->reg_offset !=  OMAP_MUX_TERMINATOR) {
-                omap_mux_write(board_mux->value, board_mux->reg_offset);
-                board_mux++;
-        }
-}
-
 static int __init omap_mux_copy_names(struct omap_mux *src,
                                         struct omap_mux *dst)
 {
@@ -998,12 +998,15 @@ int __init omap_mux_init(u32 mux_pbase, u32 mux_size,
                 omap_mux_package_fixup(package_subset, superset);
         if (package_balls)
                 omap_mux_package_init_balls(package_balls, superset);
-        omap_mux_set_cmdline_signals();
-        omap_mux_set_board_signals(board_mux);
 #endif
 
         omap_mux_init_list(superset);
 
+#ifdef CONFIG_OMAP_MUX
+        omap_mux_set_cmdline_signals();
+        omap_mux_write_array(board_mux);
+#endif
+
         return 0;
 }
 
diff --git a/arch/arm/mach-omap2/mux.h b/arch/arm/mach-omap2/mux.h
index d8b4d5ad2278..f8c2e7a8f063 100644
--- a/arch/arm/mach-omap2/mux.h
+++ b/arch/arm/mach-omap2/mux.h
@@ -147,6 +147,30 @@ u16 omap_mux_get_gpio(int gpio);
 void omap_mux_set_gpio(u16 val, int gpio);
 
 /**
+ * omap_mux_read() - read mux register
+ * @mux_offset:         Offset of the mux register
+ *
+ */
+u16 omap_mux_read(u16 mux_offset);
+
+/**
+ * omap_mux_write() - write mux register
+ * @val:                New mux register value
+ * @mux_offset:         Offset of the mux register
+ *
+ * This should be only needed for dynamic remuxing of non-gpio signals.
+ */
+void omap_mux_write(u16 val, u16 mux_offset);
+
+/**
+ * omap_mux_write_array() - write an array of mux registers
+ * @board_mux:          Array of mux registers terminated by MAP_MUX_TERMINATOR
+ *
+ * This should be only needed for dynamic remuxing of non-gpio signals.
+ */
+void omap_mux_write_array(struct omap_board_mux *board_mux);
+
+/**
  * omap3_mux_init() - initialize mux system with board specific set
  * @board_mux:          Board specific mux table
  * @flags:              OMAP package type used for the board
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index d8c8545875b1..478ae585ca39 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -94,7 +94,8 @@ static int _update_sysc_cache(struct omap_hwmod *oh)
 
         oh->_sysc_cache = omap_hwmod_readl(oh, oh->sysconfig->sysc_offs);
 
-        oh->_int_flags |= _HWMOD_SYSCONFIG_LOADED;
+        if (!(oh->sysconfig->sysc_flags & SYSC_NO_CACHE))
+                oh->_int_flags |= _HWMOD_SYSCONFIG_LOADED;
 
         return 0;
 }
diff --git a/arch/arm/mach-omap2/pm-debug.c b/arch/arm/mach-omap2/pm-debug.c
index 860b755d2220..a0866268aa41 100644
--- a/arch/arm/mach-omap2/pm-debug.c
+++ b/arch/arm/mach-omap2/pm-debug.c
@@ -54,8 +54,6 @@ int omap2_pm_debug;
         regs[reg_count++].val = \
                          __raw_readl(OMAP2_L4_IO_ADDRESS(0x480fe000 + (off)))
 
-static int __init pm_dbg_init(void);
-
 void omap2_pm_dump(int mode, int resume, unsigned int us)
 {
         struct reg {
@@ -167,6 +165,8 @@ struct dentry *pm_dbg_dir;
 
 static int pm_dbg_init_done;
 
+static int __init pm_dbg_init(void);
+
 enum {
         DEBUG_FILE_COUNTERS = 0,
         DEBUG_FILE_TIMERS,
@@ -488,9 +488,11 @@ int pm_dbg_regset_init(int reg_set)
 
 static int pwrdm_suspend_get(void *data, u64 *val)
 {
-        *val = omap3_pm_get_suspend_state((struct powerdomain *)data);
+        int ret;
+        ret = omap3_pm_get_suspend_state((struct powerdomain *)data);
+        *val = ret;
 
-        if (*val >= 0)
+        if (ret >= 0)
                 return 0;
         return *val;
 }
@@ -604,6 +606,4 @@ static int __init pm_dbg_init(void)
 }
 arch_initcall(pm_dbg_init);
 
-#else
-void pm_dbg_update_time(struct powerdomain *pwrdm, int prev) {}
 #endif
diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h
index 0bf345db7147..7a9c2d004511 100644
--- a/arch/arm/mach-omap2/pm.h
+++ b/arch/arm/mach-omap2/pm.h
@@ -32,12 +32,16 @@ extern struct omap_dm_timer *gptimer_wakeup;
 #ifdef CONFIG_PM_DEBUG
 extern void omap2_pm_dump(int mode, int resume, unsigned int us);
 extern int omap2_pm_debug;
+#else
+#define omap2_pm_dump(mode, resume, us)         do {} while (0);
+#define omap2_pm_debug                          0
+#endif
+
+#if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS)
 extern void pm_dbg_update_time(struct powerdomain *pwrdm, int prev);
 extern int pm_dbg_regset_save(int reg_set);
 extern int pm_dbg_regset_init(int reg_set);
 #else
-#define omap2_pm_dump(mode, resume, us)         do {} while (0);
-#define omap2_pm_debug                          0
 #define pm_dbg_update_time(pwrdm, prev) do {} while (0);
 #define pm_dbg_regset_save(reg_set) do {} while (0);
 #define pm_dbg_regset_init(reg_set) do {} while (0);
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index c6cc809afb79..910a7acf542d 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -26,6 +26,7 @@
 #include <linux/err.h>
 #include <linux/gpio.h>
 #include <linux/clk.h>
+#include <linux/delay.h>
 
 #include <plat/sram.h>
 #include <plat/clockdomain.h>
@@ -126,7 +127,15 @@ static void omap3_core_save_context(void)
         /* wait for the save to complete */
         while (!(omap_ctrl_readl(OMAP343X_CONTROL_GENERAL_PURPOSE_STATUS)
                         & PADCONF_SAVE_DONE))
-                ;
+                udelay(1);
+
+        /*
+         * Force write last pad into memory, as this can fail in some
+         * cases according to erratas 1.157, 1.185
+         */
+        omap_ctrl_writel(omap_ctrl_readl(OMAP343X_PADCONF_ETK_D14),
+                OMAP343X_CONTROL_MEM_WKUP + 0x2a0);
+
         /* Save the Interrupt controller context */
         omap_intc_save_context();
         /* Save the GPMC context */
@@ -392,6 +401,7 @@ void omap_sram_idle(void)
                 prm_set_mod_reg_bits(OMAP3430_EN_IO, WKUP_MOD, PM_WKEN);
                 omap3_enable_io_chain();
         }
+        omap3_intc_prepare_idle();
 
         /*
         * On EMU/HS devices ROM code restores a SRDC value
@@ -438,6 +448,7 @@ void omap_sram_idle(void)
                                                OMAP3430_GR_MOD,
                                                OMAP3_PRM_VOLTCTRL_OFFSET);
         }
+        omap3_intc_resume_idle();
 
         /* PER */
         if (per_next_state < PWRDM_POWER_ON) {
@@ -578,6 +589,8 @@ static int omap3_pm_suspend(void)
         }
 
         omap_uart_prepare_suspend();
+        omap3_intc_suspend();
+
         omap_sram_idle();
 
 restore:
@@ -835,6 +848,8 @@ static void __init prcm_setup_regs(void)
                         CM_AUTOIDLE);
         }
 
+        omap_ctrl_writel(OMAP3430_AUTOIDLE, OMAP2_CONTROL_SYSCONFIG);
+
         /*
          * Set all plls to autoidle. This is needed until autoidle is
          * enabled by clockfw
@@ -875,15 +890,23 @@ static void __init prcm_setup_regs(void)
         prm_write_mod_reg(OMAP3430_IO_EN | OMAP3430_WKUP_EN,
                           OCP_MOD, OMAP3_PRM_IRQENABLE_MPU_OFFSET);
 
+        /* Enable PM_WKEN to support DSS LPR */
+        prm_write_mod_reg(OMAP3430_PM_WKEN_DSS_EN_DSS,
+                                OMAP3430_DSS_MOD, PM_WKEN);
+
         /* Enable wakeups in PER */
         prm_write_mod_reg(OMAP3430_EN_GPIO2 | OMAP3430_EN_GPIO3 |
                           OMAP3430_EN_GPIO4 | OMAP3430_EN_GPIO5 |
-                          OMAP3430_EN_GPIO6 | OMAP3430_EN_UART3,
+                          OMAP3430_EN_GPIO6 | OMAP3430_EN_UART3 |
+                          OMAP3430_EN_MCBSP2 | OMAP3430_EN_MCBSP3 |
+                          OMAP3430_EN_MCBSP4,
                           OMAP3430_PER_MOD, PM_WKEN);
         /* and allow them to wake up MPU */
         prm_write_mod_reg(OMAP3430_GRPSEL_GPIO2 | OMAP3430_EN_GPIO3 |
                           OMAP3430_GRPSEL_GPIO4 | OMAP3430_EN_GPIO5 |
-                          OMAP3430_GRPSEL_GPIO6 | OMAP3430_EN_UART3,
+                          OMAP3430_GRPSEL_GPIO6 | OMAP3430_EN_UART3 |
+                          OMAP3430_EN_MCBSP2 | OMAP3430_EN_MCBSP3 |
+                          OMAP3430_EN_MCBSP4,
                           OMAP3430_PER_MOD, OMAP3430_PM_MPUGRPSEL);
 
         /* Don't attach IVA interrupts */
@@ -904,24 +927,6 @@ static void __init prcm_setup_regs(void)
         /* Clear any pending PRCM interrupts */
         prm_write_mod_reg(0, OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
 
-        /* Don't attach IVA interrupts */
-        prm_write_mod_reg(0, WKUP_MOD, OMAP3430_PM_IVAGRPSEL);
-        prm_write_mod_reg(0, CORE_MOD, OMAP3430_PM_IVAGRPSEL1);
-        prm_write_mod_reg(0, CORE_MOD, OMAP3430ES2_PM_IVAGRPSEL3);
-        prm_write_mod_reg(0, OMAP3430_PER_MOD, OMAP3430_PM_IVAGRPSEL);
-
-        /* Clear any pending 'reset' flags */
-        prm_write_mod_reg(0xffffffff, MPU_MOD, RM_RSTST);
-        prm_write_mod_reg(0xffffffff, CORE_MOD, RM_RSTST);
-        prm_write_mod_reg(0xffffffff, OMAP3430_PER_MOD, RM_RSTST);
-        prm_write_mod_reg(0xffffffff, OMAP3430_EMU_MOD, RM_RSTST);
-        prm_write_mod_reg(0xffffffff, OMAP3430_NEON_MOD, RM_RSTST);
-        prm_write_mod_reg(0xffffffff, OMAP3430_DSS_MOD, RM_RSTST);
-        prm_write_mod_reg(0xffffffff, OMAP3430ES2_USBHOST_MOD, RM_RSTST);
-
-        /* Clear any pending PRCM interrupts */
-        prm_write_mod_reg(0, OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
-
         omap3_iva_idle();
         omap3_d2d_idle();
 }
diff --git a/arch/arm/mach-omap2/prcm.c b/arch/arm/mach-omap2/prcm.c
index 3ea8177ffb25..cf466ea1dffc 100644
--- a/arch/arm/mach-omap2/prcm.c
+++ b/arch/arm/mach-omap2/prcm.c
@@ -44,7 +44,6 @@ struct omap3_prcm_regs {
         u32 iva2_cm_clksel2;
         u32 cm_sysconfig;
         u32 sgx_cm_clksel;
-        u32 wkup_cm_clksel;
         u32 dss_cm_clksel;
         u32 cam_cm_clksel;
         u32 per_cm_clksel;
@@ -53,7 +52,6 @@ struct omap3_prcm_regs {
         u32 pll_cm_autoidle2;
         u32 pll_cm_clksel4;
         u32 pll_cm_clksel5;
-        u32 pll_cm_clken;
         u32 pll_cm_clken2;
         u32 cm_polctrl;
         u32 iva2_cm_fclken;
@@ -77,7 +75,6 @@ struct omap3_prcm_regs {
         u32 usbhost_cm_iclken;
         u32 iva2_cm_autiidle2;
         u32 mpu_cm_autoidle2;
-        u32 pll_cm_autoidle;
         u32 iva2_cm_clkstctrl;
         u32 mpu_cm_clkstctrl;
         u32 core_cm_clkstctrl;
@@ -274,7 +271,6 @@ void omap3_prcm_save_context(void)
         prcm_context.cm_sysconfig = __raw_readl(OMAP3430_CM_SYSCONFIG);
         prcm_context.sgx_cm_clksel =
                          cm_read_mod_reg(OMAP3430ES2_SGX_MOD, CM_CLKSEL);
-        prcm_context.wkup_cm_clksel = cm_read_mod_reg(WKUP_MOD, CM_CLKSEL);
         prcm_context.dss_cm_clksel =
                          cm_read_mod_reg(OMAP3430_DSS_MOD, CM_CLKSEL);
         prcm_context.cam_cm_clksel =
@@ -291,8 +287,6 @@ void omap3_prcm_save_context(void)
                         cm_read_mod_reg(PLL_MOD, OMAP3430ES2_CM_CLKSEL4);
         prcm_context.pll_cm_clksel5 =
                          cm_read_mod_reg(PLL_MOD, OMAP3430ES2_CM_CLKSEL5);
-        prcm_context.pll_cm_clken =
-                        cm_read_mod_reg(PLL_MOD, CM_CLKEN);
         prcm_context.pll_cm_clken2 =
                         cm_read_mod_reg(PLL_MOD, OMAP3430ES2_CM_CLKEN2);
         prcm_context.cm_polctrl = __raw_readl(OMAP3430_CM_POLCTRL);
@@ -338,8 +332,6 @@ void omap3_prcm_save_context(void)
                          cm_read_mod_reg(OMAP3430_IVA2_MOD, CM_AUTOIDLE2);
         prcm_context.mpu_cm_autoidle2 =
                          cm_read_mod_reg(MPU_MOD, CM_AUTOIDLE2);
-        prcm_context.pll_cm_autoidle =
-                         cm_read_mod_reg(PLL_MOD, CM_AUTOIDLE);
         prcm_context.iva2_cm_clkstctrl =
                          cm_read_mod_reg(OMAP3430_IVA2_MOD, CM_CLKSTCTRL);
         prcm_context.mpu_cm_clkstctrl =
@@ -431,7 +423,6 @@ void omap3_prcm_restore_context(void)
         __raw_writel(prcm_context.cm_sysconfig, OMAP3430_CM_SYSCONFIG);
         cm_write_mod_reg(prcm_context.sgx_cm_clksel, OMAP3430ES2_SGX_MOD,
                                          CM_CLKSEL);
-        cm_write_mod_reg(prcm_context.wkup_cm_clksel, WKUP_MOD, CM_CLKSEL);
         cm_write_mod_reg(prcm_context.dss_cm_clksel, OMAP3430_DSS_MOD,
                                          CM_CLKSEL);
         cm_write_mod_reg(prcm_context.cam_cm_clksel, OMAP3430_CAM_MOD,
@@ -448,7 +439,6 @@ void omap3_prcm_restore_context(void)
                                         OMAP3430ES2_CM_CLKSEL4);
         cm_write_mod_reg(prcm_context.pll_cm_clksel5, PLL_MOD,
                                          OMAP3430ES2_CM_CLKSEL5);
-        cm_write_mod_reg(prcm_context.pll_cm_clken, PLL_MOD, CM_CLKEN);
         cm_write_mod_reg(prcm_context.pll_cm_clken2, PLL_MOD,
                                         OMAP3430ES2_CM_CLKEN2);
         __raw_writel(prcm_context.cm_polctrl, OMAP3430_CM_POLCTRL);
@@ -487,7 +477,6 @@ void omap3_prcm_restore_context(void)
         cm_write_mod_reg(prcm_context.iva2_cm_autiidle2, OMAP3430_IVA2_MOD,
                                         CM_AUTOIDLE2);
         cm_write_mod_reg(prcm_context.mpu_cm_autoidle2, MPU_MOD, CM_AUTOIDLE2);
-        cm_write_mod_reg(prcm_context.pll_cm_autoidle, PLL_MOD, CM_AUTOIDLE);
         cm_write_mod_reg(prcm_context.iva2_cm_clkstctrl, OMAP3430_IVA2_MOD,
                                         CM_CLKSTCTRL);
         cm_write_mod_reg(prcm_context.mpu_cm_clkstctrl, MPU_MOD, CM_CLKSTCTRL);
diff --git a/arch/arm/mach-omap2/prm.h b/arch/arm/mach-omap2/prm.h
index ea050ce188a7..40f006285163 100644
--- a/arch/arm/mach-omap2/prm.h
+++ b/arch/arm/mach-omap2/prm.h
@@ -24,6 +24,8 @@
                 OMAP2_L4_IO_ADDRESS(OMAP3430_PRM_BASE + (module) + (reg))
 #define OMAP44XX_PRM_REGADDR(module, reg)                               \
                 OMAP2_L4_IO_ADDRESS(OMAP4430_PRM_BASE + (module) + (reg))
+#define OMAP44XX_CHIRONSS_REGADDR(module, reg)                          \
+                OMAP2_L4_IO_ADDRESS(OMAP4430_CHIRONSS_BASE + (module) + (reg))
 
 #include "prm44xx.h"
 
diff --git a/arch/arm/mach-omap2/prm44xx.h b/arch/arm/mach-omap2/prm44xx.h
index 89be97f0589d..adb2558bb121 100644
--- a/arch/arm/mach-omap2/prm44xx.h
+++ b/arch/arm/mach-omap2/prm44xx.h
@@ -386,26 +386,26 @@
 
 
 /* CHIRON_PRCM.CHIRONSS_OCP_SOCKET_PRCM register offsets */
-#define OMAP4430_REVISION_PRCM                          OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_OCP_SOCKET_PRCM_MOD, 0x0000)
+#define OMAP4430_REVISION_PRCM                          OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_OCP_SOCKET_PRCM_MOD, 0x0000)
 
 /* CHIRON_PRCM.CHIRONSS_DEVICE_PRM register offsets */
-#define OMAP4430_CHIRON_PRCM_PRM_RSTST                  OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_DEVICE_PRM_MOD, 0x0000)
+#define OMAP4430_CHIRON_PRCM_PRM_RSTST                  OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_DEVICE_PRM_MOD, 0x0000)
 
 /* CHIRON_PRCM.CHIRONSS_CPU0 register offsets */
-#define OMAP4430_PM_PDA_CPU0_PWRSTCTRL                  OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x0000)
-#define OMAP4430_PM_PDA_CPU0_PWRSTST                    OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x0004)
-#define OMAP4430_RM_PDA_CPU0_CPU0_CONTEXT               OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x0008)
-#define OMAP4430_RM_PDA_CPU0_CPU0_RSTCTRL               OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x000c)
-#define OMAP4430_RM_PDA_CPU0_CPU0_RSTST                 OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x0010)
-#define OMAP4430_CM_PDA_CPU0_CPU0_CLKCTRL               OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x0014)
-#define OMAP4430_CM_PDA_CPU0_CLKSTCTRL                  OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x0018)
+#define OMAP4430_PM_PDA_CPU0_PWRSTCTRL                  OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x0000)
+#define OMAP4430_PM_PDA_CPU0_PWRSTST                    OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x0004)
+#define OMAP4430_RM_PDA_CPU0_CPU0_CONTEXT               OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x0008)
+#define OMAP4430_RM_PDA_CPU0_CPU0_RSTCTRL               OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x000c)
+#define OMAP4430_RM_PDA_CPU0_CPU0_RSTST                 OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x0010)
+#define OMAP4430_CM_PDA_CPU0_CPU0_CLKCTRL               OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x0014)
+#define OMAP4430_CM_PDA_CPU0_CLKSTCTRL                  OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x0018)
 
 /* CHIRON_PRCM.CHIRONSS_CPU1 register offsets */
-#define OMAP4430_PM_PDA_CPU1_PWRSTCTRL                  OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x0000)
-#define OMAP4430_PM_PDA_CPU1_PWRSTST                    OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x0004)
-#define OMAP4430_RM_PDA_CPU1_CPU1_CONTEXT               OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x0008)
-#define OMAP4430_RM_PDA_CPU1_CPU1_RSTCTRL               OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x000c)
-#define OMAP4430_RM_PDA_CPU1_CPU1_RSTST                 OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x0010)
-#define OMAP4430_CM_PDA_CPU1_CPU1_CLKCTRL               OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x0014)
-#define OMAP4430_CM_PDA_CPU1_CLKSTCTRL                  OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x0018)
+#define OMAP4430_PM_PDA_CPU1_PWRSTCTRL                  OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x0000)
+#define OMAP4430_PM_PDA_CPU1_PWRSTST                    OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x0004)
+#define OMAP4430_RM_PDA_CPU1_CPU1_CONTEXT               OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x0008)
+#define OMAP4430_RM_PDA_CPU1_CPU1_RSTCTRL               OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x000c)
+#define OMAP4430_RM_PDA_CPU1_CPU1_RSTST                 OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x0010)
+#define OMAP4430_CM_PDA_CPU1_CPU1_CLKCTRL               OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x0014)
+#define OMAP4430_CM_PDA_CPU1_CLKSTCTRL                  OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x0018)
 #endif
diff --git a/arch/arm/mach-omap2/sleep34xx.S b/arch/arm/mach-omap2/sleep34xx.S
index 15268f8b61de..c3626ea48143 100644
--- a/arch/arm/mach-omap2/sleep34xx.S
+++ b/arch/arm/mach-omap2/sleep34xx.S
@@ -245,7 +245,8 @@ restore:
         mov     r1, #0          @ set task id for ROM code in r1
         mov     r2, #4          @ set some flags in r2, r6
         mov     r6, #0xff
-        adr     r3, write_aux_control_params    @ r3 points to parameters
+        ldr     r4, scratchpad_base
+        ldr     r3, [r4, #0xBC] @ r3 points to parameters
         mcr     p15, 0, r0, c7, c10, 4  @ data write barrier
         mcr     p15, 0, r0, c7, c10, 5  @ data memory barrier
         .word   0xE1600071              @ call SMI monitor (smi #1)
@@ -253,14 +254,14 @@ restore:
         b       logic_l1_restore
 l2_inv_api_params:
         .word   0x1, 0x00
-write_aux_control_params:
-        .word   0x1, 0x72
 l2_inv_gp:
         /* Execute smi to invalidate L2 cache */
         mov r12, #0x1                         @ set up to invalide L2
 smi:    .word 0xE1600070                @ Call SMI monitor (smieq)
         /* Write to Aux control register to set some bits */
-        mov     r0, #0x72
+        ldr     r4, scratchpad_base
+        ldr     r3, [r4,#0xBC]
+        ldr     r0, [r3,#4]
         mov     r12, #0x3
         .word 0xE1600070        @ Call SMI monitor (smieq)
 logic_l1_restore:
@@ -271,6 +272,7 @@ logic_l1_restore:
 
         ldr     r4, scratchpad_base
         ldr     r3, [r4,#0xBC]
+        adds    r3, r3, #8
         ldmia   r3!, {r4-r6}
         mov     sp, r4
         msr     spsr_cxsf, r5
@@ -387,6 +389,9 @@ usettbr0:
 save_context_wfi:
         /*b     save_context_wfi*/      @ enable to debug save code
         mov     r8, r0 /* Store SDRAM address in r8 */
+        mrc     p15, 0, r5, c1, c0, 1   @ Read Auxiliary Control Register
+        mov     r4, #0x1                @ Number of parameters for restore call
+        stmia   r8!, {r4-r5}
         /* Check what that target sleep state is:stored in r1*/
         /* 1 - Only L1 and logic lost */
         /* 2 - Only L2 lost */
diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c
index bf1eaf3a27d4..dddc0273bc8b 100644
--- a/arch/arm/plat-omap/common.c
+++ b/arch/arm/plat-omap/common.c
@@ -172,6 +172,32 @@ unsigned long long sched_clock(void)
                                   clocksource_32k.mult, clocksource_32k.shift);
 }
 
+/**
+ * read_persistent_clock -  Return time from a persistent clock.
+ *
+ * Reads the time from a source which isn't disabled during PM, the
+ * 32k sync timer.  Convert the cycles elapsed since last read into
+ * nsecs and adds to a monotonically increasing timespec.
+ */
+static struct timespec persistent_ts;
+static cycles_t cycles, last_cycles;
+void read_persistent_clock(struct timespec *ts)
+{
+        unsigned long long nsecs;
+        cycles_t delta;
+        struct timespec *tsp = &persistent_ts;
+
+        last_cycles = cycles;
+        cycles = clocksource_32k.read(&clocksource_32k);
+        delta = cycles - last_cycles;
+
+        nsecs = clocksource_cyc2ns(delta,
+                                   clocksource_32k.mult, clocksource_32k.shift);
+
+        timespec_add_ns(tsp, nsecs);
+        *ts = *tsp;
+}
+
 static int __init omap_init_clocksource_32k(void)
 {
         static char err[] __initdata = KERN_ERR
diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index 09d82b3c66ce..728c64204184 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -1183,7 +1183,7 @@ void omap_dma_unlink_lch(int lch_head, int lch_queue)
         }
 
         if ((dma_chan[lch_head].flags & OMAP_DMA_ACTIVE) ||
-            (dma_chan[lch_head].flags & OMAP_DMA_ACTIVE)) {
+            (dma_chan[lch_queue].flags & OMAP_DMA_ACTIVE)) {
                 printk(KERN_ERR "omap_dma: You need to stop the DMA channels "
                        "before unlinking\n");
                 dump_stack();
diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c
index 64f407ee0f4e..08ccf8922520 100644
--- a/arch/arm/plat-omap/dmtimer.c
+++ b/arch/arm/plat-omap/dmtimer.c
@@ -551,6 +551,19 @@ void omap_dm_timer_stop(struct omap_dm_timer *timer)
         if (l & OMAP_TIMER_CTRL_ST) {
                 l &= ~0x1;
                 omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l);
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
+                        defined(CONFIG_ARCH_OMAP4)
+                /* Readback to make sure write has completed */
+                omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG);
+                 /*
+                  * Wait for functional clock period x 3.5 to make sure that
+                  * timer is stopped
+                  */
+                udelay(3500000 / clk_get_rate(timer->fclk) + 1);
+                /* Ack possibly pending interrupt */
+                omap_dm_timer_write_reg(timer, OMAP_TIMER_STAT_REG,
+                                OMAP_TIMER_INT_OVERFLOW);
+#endif
         }
 }
 EXPORT_SYMBOL_GPL(omap_dm_timer_stop);
diff --git a/arch/arm/plat-omap/include/plat/cpu.h b/arch/arm/plat-omap/include/plat/cpu.h
index 9a028bdebb06..a162f585b1e3 100644
--- a/arch/arm/plat-omap/include/plat/cpu.h
+++ b/arch/arm/plat-omap/include/plat/cpu.h
@@ -434,6 +434,7 @@ IS_OMAP_TYPE(3517, 0x3517)
 #define OMAP3430_REV_ES2_1      0x34302034
 #define OMAP3430_REV_ES3_0      0x34303034
 #define OMAP3430_REV_ES3_1      0x34304034
+#define OMAP3430_REV_ES3_1_2    0x34305034
 
 #define OMAP3630_REV_ES1_0      0x36300034
 
diff --git a/arch/arm/plat-omap/include/plat/irqs.h b/arch/arm/plat-omap/include/plat/irqs.h
index 97d6c50c3dcb..c0ab7c80f72e 100644
--- a/arch/arm/plat-omap/include/plat/irqs.h
+++ b/arch/arm/plat-omap/include/plat/irqs.h
@@ -499,6 +499,9 @@ extern void omap_init_irq(void);
 extern int omap_irq_pending(void);
 void omap_intc_save_context(void);
 void omap_intc_restore_context(void);
+void omap3_intc_suspend(void);
+void omap3_intc_prepare_idle(void);
+void omap3_intc_resume_idle(void);
 #endif
 
 #include <mach/hardware.h>
diff --git a/arch/arm/plat-omap/include/plat/omap_hwmod.h b/arch/arm/plat-omap/include/plat/omap_hwmod.h
index 007935a921ea..33933256a226 100644
--- a/arch/arm/plat-omap/include/plat/omap_hwmod.h
+++ b/arch/arm/plat-omap/include/plat/omap_hwmod.h
@@ -227,6 +227,7 @@ struct omap_hwmod_ocp_if {
 #define SYSC_HAS_SIDLEMODE      (1 << 5)
 #define SYSC_HAS_MIDLEMODE      (1 << 6)
 #define SYSS_MISSING            (1 << 7)
+#define SYSC_NO_CACHE           (1 << 8)  /* XXX SW flag, belongs elsewhere */
 
 /* omap_hwmod_sysconfig.clockact flags */
 #define CLOCKACT_TEST_BOTH      0x0