1 files changed, 24 insertions, 21 deletions

diff --git a/arch/arm/mach-omap2/sram34xx.S b/arch/arm/mach-omap2/sram34xx.S
index d13f1cc4bd58..37a1e1fc0ab6 100644
--- a/arch/arm/mach-omap2/sram34xx.S
+++ b/arch/arm/mach-omap2/sram34xx.S
@@ -3,13 +3,12 @@
  *
  * Omap3 specific functions that need to be run in internal SRAM
  *
- * (C) Copyright 2007
- * Texas Instruments Inc.
- * Rajendra Nayak <rnayak@ti.com>
+ * Copyright (C) 2004, 2007, 2008 Texas Instruments, Inc.
+ * Copyright (C) 2008 Nokia Corporation
  *
- * (C) Copyright 2004
- * Texas Instruments, <www.ti.com>
+ * Rajendra Nayak <rnayak@ti.com>
  * Richard Woodruff <r-woodruff2@ti.com>
+ * Paul Walmsley
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License as
@@ -38,13 +37,16 @@
         .text
 
 /*
- * Change frequency of core dpll
- * r0 = sdrc_rfr_ctrl r1 = sdrc_actim_ctrla r2 = sdrc_actim_ctrlb r3 = M2
- * r4 = Unlock SDRC DLL? (1 = yes, 0 = no) -- only unlock DLL for
+ * omap3_sram_configure_core_dpll - change DPLL3 M2 divider
+ * r0 = new SDRC_RFR_CTRL register contents
+ * r1 = new SDRC_ACTIM_CTRLA register contents
+ * r2 = new SDRC_ACTIM_CTRLB register contents
+ * r3 = new M2 divider setting (only 1 and 2 supported right now)
+ * r4 = unlock SDRC DLL? (1 = yes, 0 = no).  Only unlock DLL for
  *      SDRC rates < 83MHz
  * r5 = number of MPU cycles to wait for SDRC to stabilize after
  *      reprogramming the SDRC when switching to a slower MPU speed
- * r6 = SDRC_MR_0 register value
+ * r6 = new SDRC_MR_0 register value
  *
  */
 ENTRY(omap3_sram_configure_core_dpll)
@@ -53,22 +55,22 @@ ENTRY(omap3_sram_configure_core_dpll)
         ldr     r5, [sp, #56]           @ load extra args from the stack
         ldr     r6, [sp, #60]           @ load extra args from the stack
         dsb                             @ flush buffered writes to interconnect
-        cmp     r3, #0x2
-        blne    configure_sdrc
-        cmp     r4, #0x1
+        cmp     r3, #0x2                @ if increasing SDRC clk rate,
+        blne    configure_sdrc          @ program the SDRC regs early (for RFR)
+        cmp     r4, #0x1                @ set the intended DLL state
         bleq    unlock_dll
         blne    lock_dll
-        bl      sdram_in_selfrefresh    @ put the SDRAM in self refresh
-        bl      configure_core_dpll
-        bl      enable_sdrc
-        cmp     r4, #0x1
+        bl      sdram_in_selfrefresh    @ put SDRAM in self refresh, idle SDRC
+        bl      configure_core_dpll     @ change the DPLL3 M2 divider
+        bl      enable_sdrc             @ take SDRC out of idle
+        cmp     r4, #0x1                @ wait for DLL status to change
         bleq    wait_dll_unlock
         blne    wait_dll_lock
-        cmp     r3, #0x1
-        beq     return_to_sdram
-        bl      configure_sdrc
-        mov     r12, r5                 @ if slowing, wait for SDRC to stabilize
-        bl      wait_clk_stable
+        cmp     r3, #0x1                @ if increasing SDRC clk rate,
+        beq     return_to_sdram         @ return to SDRAM code, otherwise,
+        bl      configure_sdrc          @ reprogram SDRC regs now
+        mov     r12, r5
+        bl      wait_clk_stable         @ wait for SDRC to stabilize
 return_to_sdram:
         isb                             @ prevent speculative exec past here
         mov     r0, #0                  @ return value
@@ -93,6 +95,7 @@ sdram_in_selfrefresh:
         bic     r12, r12, #0x4          @ clear PWDENA
         str     r12, [r11]              @ write back to SDRC_POWER register
         ldr     r12, [r11]              @ posted-write barrier for SDRC
+idle_sdrc:
         ldr     r11, omap3_cm_iclken1_core      @ read the CM_ICLKEN1_CORE reg
         ldr     r12, [r11]
         bic     r12, r12, #0x2          @ disable iclk bit for SDRC