106 files changed, 8926 insertions, 85 deletions

diff --git a/Documentation/arm/Samsung-S3C24XX/CPUfreq.txt b/Documentation/arm/Samsung-S3C24XX/CPUfreq.txt
new file mode 100644
index 000000000000..76b3a11e90be
--- /dev/null
+++ b/Documentation/arm/Samsung-S3C24XX/CPUfreq.txt
@@ -0,0 +1,75 @@
+                S3C24XX CPUfreq support
+                =======================
+
+Introduction
+------------
+
+ The S3C24XX series support a number of power saving systems, such as
+ the ability to change the core, memory and peripheral operating
+ frequencies. The core control is exported via the CPUFreq driver
+ which has a number of different manual or automatic controls over the
+ rate the core is running at.
+
+ There are two forms of the driver depending on the specific CPU and
+ how the clocks are arranged. The first implementation used as single
+ PLL to feed the ARM, memory and peripherals via a series of dividers
+ and muxes and this is the implementation that is documented here. A
+ newer version where there is a seperate PLL and clock divider for the
+ ARM core is available as a seperate driver.
+
+
+Layout
+------
+
+ The code core manages the CPU specific drivers, any data that they
+ need to register and the interface to the generic drivers/cpufreq
+ system. Each CPU registers a driver to control the PLL, clock dividers
+ and anything else associated with it. Any board that wants to use this
+ framework needs to supply at least basic details of what is required.
+
+ The core registers with drivers/cpufreq at init time if all the data
+ necessary has been supplied.
+
+
+CPU support
+-----------
+
+ The support for each CPU depends on the facilities provided by the
+ SoC and the driver as each device has different PLL and clock chains
+ associated with it.
+
+
+Slow Mode
+---------
+
+ The SLOW mode where the PLL is turned off altogether and the
+ system is fed by the external crystal input is currently not
+ supported.
+
+
+sysfs
+-----
+
+ The core code exports extra information via sysfs in the directory
+ devices/system/cpu/cpu0/arch-freq.
+
+
+Board Support
+-------------
+
+ Each board that wants to use the cpufreq code must register some basic
+ information with the core driver to provide information about what the
+ board requires and any restrictions being placed on it.
+
+ The board needs to supply information about whether it needs the IO bank
+ timings changing, any maximum frequency limits and information about the
+ SDRAM refresh rate.
+
+
+
+
+Document Author
+---------------
+
+Ben Dooks, Copyright 2009 Simtec Electronics
+Licensed under GPLv2
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 9746667c1973..5f6d977bd3df 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -122,6 +122,13 @@ config ARCH_HAS_ILOG2_U32
 config ARCH_HAS_ILOG2_U64
         bool
 
+config ARCH_HAS_CPUFREQ
+        bool
+        help
+          Internal node to signify that the ARCH has CPUFREQ support
+          and that the relevant menu configurations are displayed for
+          it.
+
 config GENERIC_HWEIGHT
         bool
         default y
@@ -206,6 +213,7 @@ config ARCH_AAEC2000
 config ARCH_INTEGRATOR
         bool "ARM Ltd. Integrator family"
         select ARM_AMBA
+        select ARCH_HAS_CPUFREQ
         select HAVE_CLK
         select COMMON_CLKDEV
         select ICST525
@@ -512,6 +520,7 @@ config ARCH_PXA
         bool "PXA2xx/PXA3xx-based"
         depends on MMU
         select ARCH_MTD_XIP
+        select ARCH_HAS_CPUFREQ
         select GENERIC_GPIO
         select HAVE_CLK
         select COMMON_CLKDEV
@@ -554,6 +563,7 @@ config ARCH_SA1100
         select ISA
         select ARCH_SPARSEMEM_ENABLE
         select ARCH_MTD_XIP
+        select ARCH_HAS_CPUFREQ
         select GENERIC_GPIO
         select GENERIC_TIME
         select GENERIC_CLOCKEVENTS
@@ -566,6 +576,7 @@ config ARCH_SA1100
 config ARCH_S3C2410
         bool "Samsung S3C2410, S3C2412, S3C2413, S3C2440, S3C2442, S3C2443"
         select GENERIC_GPIO
+        select ARCH_HAS_CPUFREQ
         select HAVE_CLK
         help
           Samsung S3C2410X CPU based systems, such as the Simtec Electronics
@@ -576,9 +587,18 @@ config ARCH_S3C64XX
         bool "Samsung S3C64XX"
         select GENERIC_GPIO
         select HAVE_CLK
+        select ARCH_HAS_CPUFREQ
         help
           Samsung S3C64XX series based systems
 
+config ARCH_S5PC1XX
+        bool "Samsung S5PC1XX"
+        select GENERIC_GPIO
+        select HAVE_CLK
+        select CPU_V7
+        help
+          Samsung S5PC1XX series based systems
+
 config ARCH_SHARK
         bool "Shark"
         select CPU_SA110
@@ -635,6 +655,7 @@ config ARCH_OMAP
         select GENERIC_GPIO
         select HAVE_CLK
         select ARCH_REQUIRE_GPIOLIB
+        select ARCH_HAS_CPUFREQ
         select GENERIC_TIME
         select GENERIC_CLOCKEVENTS
         help
@@ -688,6 +709,7 @@ source "arch/arm/mach-kirkwood/Kconfig"
 source "arch/arm/plat-s3c24xx/Kconfig"
 source "arch/arm/plat-s3c64xx/Kconfig"
 source "arch/arm/plat-s3c/Kconfig"
+source "arch/arm/plat-s5pc1xx/Kconfig"
 
 if ARCH_S3C2410
 source "arch/arm/mach-s3c2400/Kconfig"
@@ -705,6 +727,10 @@ endif
 
 source "arch/arm/plat-stmp3xxx/Kconfig"
 
+if ARCH_S5PC1XX
+source "arch/arm/mach-s5pc100/Kconfig"
+endif
+
 source "arch/arm/mach-lh7a40x/Kconfig"
 
 source "arch/arm/mach-h720x/Kconfig"
@@ -1248,7 +1274,7 @@ endmenu
 
 menu "CPU Power Management"
 
-if (ARCH_SA1100 || ARCH_INTEGRATOR || ARCH_OMAP || ARCH_PXA || ARCH_S3C64XX)
+if ARCH_HAS_CPUFREQ
 
 source "drivers/cpufreq/Kconfig"
 
@@ -1283,6 +1309,52 @@ config CPU_FREQ_S3C64XX
         bool "CPUfreq support for Samsung S3C64XX CPUs"
         depends on CPU_FREQ && CPU_S3C6410
 
+config CPU_FREQ_S3C
+        bool
+        help
+          Internal configuration node for common cpufreq on Samsung SoC
+
+config CPU_FREQ_S3C24XX
+        bool "CPUfreq driver for Samsung S3C24XX series CPUs"
+        depends on ARCH_S3C2410 && CPU_FREQ && EXPERIMENTAL
+        select CPU_FREQ_S3C
+        help
+          This enables the CPUfreq driver for the Samsung S3C24XX family
+          of CPUs.
+
+          For details, take a look at <file:Documentation/cpu-freq>.
+
+          If in doubt, say N.
+
+config CPU_FREQ_S3C24XX_PLL
+        bool "Support CPUfreq changing of PLL frequency"
+        depends on CPU_FREQ_S3C24XX && EXPERIMENTAL
+        help
+          Compile in support for changing the PLL frequency from the
+          S3C24XX series CPUfreq driver. The PLL takes time to settle
+          after a frequency change, so by default it is not enabled.
+
+          This also means that the PLL tables for the selected CPU(s) will
+          be built which may increase the size of the kernel image.
+
+config CPU_FREQ_S3C24XX_DEBUG
+        bool "Debug CPUfreq Samsung driver core"
+        depends on CPU_FREQ_S3C24XX
+        help
+          Enable s3c_freq_dbg for the Samsung S3C CPUfreq core
+
+config CPU_FREQ_S3C24XX_IODEBUG
+        bool "Debug CPUfreq Samsung driver IO timing"
+        depends on CPU_FREQ_S3C24XX
+        help
+          Enable s3c_freq_iodbg for the Samsung S3C CPUfreq core
+
+config CPU_FREQ_S3C24XX_DEBUGFS
+        bool "Export debugfs for CPUFreq"
+        depends on CPU_FREQ_S3C24XX && DEBUG_FS
+        help
+          Export status information via debugfs.
+
 endif
 
 source "drivers/cpuidle/Kconfig"
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 8f117acd98e9..3de196e2a7a7 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -158,6 +158,7 @@ machine-$(CONFIG_ARCH_RPC)		:= rpc
 machine-$(CONFIG_ARCH_S3C2410)          := s3c2410 s3c2400 s3c2412 s3c2440 s3c2442 s3c2443
 machine-$(CONFIG_ARCH_S3C24A0)          := s3c24a0
 machine-$(CONFIG_ARCH_S3C64XX)          := s3c6400 s3c6410
+machine-$(CONFIG_ARCH_S5PC1XX)          := s5pc100
 machine-$(CONFIG_ARCH_SA1100)           := sa1100
 machine-$(CONFIG_ARCH_SHARK)            := shark
 machine-$(CONFIG_ARCH_STMP378X)         := stmp378x
@@ -177,6 +178,7 @@ plat-$(CONFIG_PLAT_ORION)	:= orion
 plat-$(CONFIG_PLAT_PXA)         := pxa
 plat-$(CONFIG_PLAT_S3C24XX)     := s3c24xx s3c
 plat-$(CONFIG_PLAT_S3C64XX)     := s3c64xx s3c
+plat-$(CONFIG_PLAT_S5PC1XX)     := s5pc1xx s3c
 plat-$(CONFIG_ARCH_STMP3XXX)    := stmp3xxx
 
 ifeq ($(CONFIG_ARCH_EBSA110),y)
diff --git a/arch/arm/configs/s5pc100_defconfig b/arch/arm/configs/s5pc100_defconfig
new file mode 100644
index 000000000000..b0d7d3d3a5e3
--- /dev/null
+++ b/arch/arm/configs/s5pc100_defconfig
@@ -0,0 +1,892 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.30
+# Wed Jul  1 15:53:07 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_MMU=y
+CONFIG_NO_IOPORT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+# CONFIG_SYSVIPC is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=17
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Performance Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+CONFIG_ARCH_S5PC1XX=y
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+CONFIG_PLAT_S3C=y
+
+#
+# Boot options
+#
+# CONFIG_S3C_BOOT_ERROR_RESET is not set
+CONFIG_S3C_BOOT_UART_FORCE_FIFO=y
+
+#
+# Power management
+#
+CONFIG_S3C_LOWLEVEL_UART_PORT=0
+CONFIG_S3C_GPIO_SPACE=0
+CONFIG_S3C_GPIO_TRACK=y
+CONFIG_S3C_GPIO_PULL_UPDOWN=y
+CONFIG_PLAT_S5PC1XX=y
+CONFIG_CPU_S5PC100_INIT=y
+CONFIG_CPU_S5PC100_CLOCK=y
+CONFIG_S5PC100_SETUP_I2C0=y
+CONFIG_CPU_S5PC100=y
+CONFIG_MACH_SMDKC100=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_V7=y
+CONFIG_CPU_32v7=y
+CONFIG_CPU_ABRT_EV7=y
+CONFIG_CPU_PABRT_IFAR=y
+CONFIG_CPU_CACHE_V7=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V7=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_ARM_THUMBEE is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_HAS_TLS_REG=y
+# CONFIG_ARM_ERRATA_430973 is not set
+# CONFIG_ARM_ERRATA_458693 is not set
+# CONFIG_ARM_ERRATA_460075 is not set
+CONFIG_ARM_VIC=y
+CONFIG_ARM_VIC_NR=2
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0
+CONFIG_ZBOOT_ROM_BSS=0
+CONFIG_CMDLINE="root=/dev/mtdblock2 rootfstype=cramfs init=/linuxrc console=ttySAC2,115200 mem=128M"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_FPE_NWFPE is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_NET is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=8192
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_MG_DISK is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+CONFIG_EEPROM_AT24=y
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_GPIO is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_MOUSE_GPIO is not set
+# CONFIG_MOUSE_SYNAPTICS_I2C is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+# CONFIG_SERIAL_8250_CONSOLE is not set
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_SAMSUNG=y
+CONFIG_SERIAL_SAMSUNG_UARTS=3
+# CONFIG_SERIAL_SAMSUNG_DEBUG is not set
+CONFIG_SERIAL_SAMSUNG_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+CONFIG_HID_DEBUG=y
+# CONFIG_HIDRAW is not set
+# CONFIG_HID_PID is not set
+
+#
+# Special HID drivers
+#
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
+
+#
+# Enable Host or Gadget support to see Inventra options
+#
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+CONFIG_MMC=y
+CONFIG_MMC_DEBUG=y
+CONFIG_MMC_UNSAFE_RESUME=y
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+CONFIG_SDIO_UART=y
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+CONFIG_MMC_SDHCI=y
+# CONFIG_MMC_SDHCI_PLTFM is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+CONFIG_GENERIC_ACL=y
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=y
+CONFIG_ROMFS_BACKED_BY_BLOCK=y
+# CONFIG_ROMFS_BACKED_BY_MTD is not set
+# CONFIG_ROMFS_BACKED_BY_BOTH is not set
+CONFIG_ROMFS_ON_BLOCK=y
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+CONFIG_DEBUG_RT_MUTEXES=y
+CONFIG_DEBUG_PI_LIST=y
+# CONFIG_RT_MUTEX_TESTER is not set
+CONFIG_DEBUG_SPINLOCK=y
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+CONFIG_DEBUG_SPINLOCK_SLEEP=y
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_BOOT_TRACER is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+CONFIG_DEBUG_S3C_PORT=y
+CONFIG_DEBUG_S3C_UART=0
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c
index b7c3490eaa24..c9a8619f3856 100644
--- a/arch/arm/kernel/irq.c
+++ b/arch/arm/kernel/irq.c
@@ -86,7 +86,7 @@ int show_interrupts(struct seq_file *p, void *v)
 unlock:
                 spin_unlock_irqrestore(&irq_desc[i].lock, flags);
         } else if (i == NR_IRQS) {
-#ifdef CONFIG_ARCH_ACORN
+#ifdef CONFIG_FIQ
                 show_fiq_list(p, v);
 #endif
 #ifdef CONFIG_SMP
diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig
index 41bb65d5b91f..d8c023d4df30 100644
--- a/arch/arm/mach-s3c2410/Kconfig
+++ b/arch/arm/mach-s3c2410/Kconfig
@@ -12,6 +12,7 @@ config CPU_S3C2410
         select S3C2410_GPIO
         select CPU_LLSERIAL_S3C2410
         select S3C2410_PM if PM
+        select S3C2410_CPUFREQ if CPU_FREQ_S3C24XX
         help
           Support for S3C2410 and S3C2410A family from the S3C24XX line
           of Samsung Mobile CPUs.
@@ -45,6 +46,22 @@ config MACH_BAST_IDE
           Internal node for machines with an BAST style IDE
           interface
 
+# cpu frequency scaling support
+
+config S3C2410_CPUFREQ
+        bool
+        depends on CPU_FREQ_S3C24XX && CPU_S3C2410
+        select S3C2410_CPUFREQ_UTILS
+        help
+          CPU Frequency scaling support for S3C2410
+
+config S3C2410_PLLTABLE
+        bool
+        depends on S3C2410_CPUFREQ && CPU_FREQ_S3C24XX_PLL
+        default y
+        help
+          Select the PLL table for the S3C2410
+
 menu "S3C2410 Machines"
 
 config ARCH_SMDK2410
@@ -79,6 +96,7 @@ config MACH_N30
 config ARCH_BAST
         bool "Simtec Electronics BAST (EB2410ITX)"
         select CPU_S3C2410
+        select S3C2410_IOTIMING if S3C2410_CPUFREQ
         select PM_SIMTEC if PM
         select SIMTEC_NOR
         select MACH_BAST_IDE
diff --git a/arch/arm/mach-s3c2410/Makefile b/arch/arm/mach-s3c2410/Makefile
index fca02f82711c..2ab5ba4b266f 100644
--- a/arch/arm/mach-s3c2410/Makefile
+++ b/arch/arm/mach-s3c2410/Makefile
@@ -15,6 +15,8 @@ obj-$(CONFIG_CPU_S3C2410_DMA)	+= dma.o
 obj-$(CONFIG_CPU_S3C2410_DMA)   += dma.o
 obj-$(CONFIG_S3C2410_PM)        += pm.o sleep.o
 obj-$(CONFIG_S3C2410_GPIO)      += gpio.o
+obj-$(CONFIG_S3C2410_CPUFREQ)   += cpu-freq.o
+obj-$(CONFIG_S3C2410_PLLTABLE)  += pll.o
 
 # Machine support
 
diff --git a/arch/arm/mach-s3c2410/cpu-freq.c b/arch/arm/mach-s3c2410/cpu-freq.c
new file mode 100644
index 000000000000..9d1186877d08
--- /dev/null
+++ b/arch/arm/mach-s3c2410/cpu-freq.c
@@ -0,0 +1,159 @@
+/* linux/arch/arm/mach-s3c2410/cpu-freq.c
+ *
+ * Copyright (c) 2006,2008 Simtec Electronics
+ *      http://armlinux.simtec.co.uk/
+ *      Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410 CPU Frequency scaling
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/cpufreq.h>
+#include <linux/sysdev.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/regs-clock.h>
+
+#include <plat/cpu.h>
+#include <plat/clock.h>
+#include <plat/cpu-freq-core.h>
+
+/* Note, 2410A has an extra mode for 1:4:4 ratio, bit 2 of CLKDIV */
+
+static void s3c2410_cpufreq_setdivs(struct s3c_cpufreq_config *cfg)
+{
+        u32 clkdiv = 0;
+
+        if (cfg->divs.h_divisor == 2)
+                clkdiv |= S3C2410_CLKDIVN_HDIVN;
+
+        if (cfg->divs.p_divisor != cfg->divs.h_divisor)
+                clkdiv |= S3C2410_CLKDIVN_PDIVN;
+
+        __raw_writel(clkdiv, S3C2410_CLKDIVN);
+}
+
+static int s3c2410_cpufreq_calcdivs(struct s3c_cpufreq_config *cfg)
+{
+        unsigned long hclk, fclk, pclk;
+        unsigned int hdiv, pdiv;
+        unsigned long hclk_max;
+
+        fclk = cfg->freq.fclk;
+        hclk_max = cfg->max.hclk;
+
+        cfg->freq.armclk = fclk;
+
+        s3c_freq_dbg("%s: fclk is %lu, max hclk %lu\n",
+                      __func__, fclk, hclk_max);
+
+        hdiv = (fclk > cfg->max.hclk) ? 2 : 1;
+        hclk = fclk / hdiv;
+
+        if (hclk > cfg->max.hclk) {
+                s3c_freq_dbg("%s: hclk too big\n", __func__);
+                return -EINVAL;
+        }
+
+        pdiv = (hclk > cfg->max.pclk) ? 2 : 1;
+        pclk = hclk / pdiv;
+
+        if (pclk > cfg->max.pclk) {
+                s3c_freq_dbg("%s: pclk too big\n", __func__);
+                return -EINVAL;
+        }
+
+        pdiv *= hdiv;
+
+        /* record the result */
+        cfg->divs.p_divisor = pdiv;
+        cfg->divs.h_divisor = hdiv;
+
+        return 0      ;
+}
+
+static struct s3c_cpufreq_info s3c2410_cpufreq_info = {
+        .max            = {
+                .fclk   = 200000000,
+                .hclk   = 100000000,
+                .pclk   =  50000000,
+        },
+
+        /* transition latency is about 5ms worst-case, so
+         * set 10ms to be sure */
+        .latency        = 10000000,
+
+        .locktime_m     = 150,
+        .locktime_u     = 150,
+        .locktime_bits  = 12,
+
+        .need_pll       = 1,
+
+        .name           = "s3c2410",
+        .calc_iotiming  = s3c2410_iotiming_calc,
+        .set_iotiming   = s3c2410_iotiming_set,
+        .get_iotiming   = s3c2410_iotiming_get,
+        .resume_clocks  = s3c2410_setup_clocks,
+
+        .set_fvco       = s3c2410_set_fvco,
+        .set_refresh    = s3c2410_cpufreq_setrefresh,
+        .set_divs       = s3c2410_cpufreq_setdivs,
+        .calc_divs      = s3c2410_cpufreq_calcdivs,
+
+        .debug_io_show  = s3c_cpufreq_debugfs_call(s3c2410_iotiming_debugfs),
+};
+
+static int s3c2410_cpufreq_add(struct sys_device *sysdev)
+{
+        return s3c_cpufreq_register(&s3c2410_cpufreq_info);
+}
+
+static struct sysdev_driver s3c2410_cpufreq_driver = {
+        .add            = s3c2410_cpufreq_add,
+};
+
+static int __init s3c2410_cpufreq_init(void)
+{
+        return sysdev_driver_register(&s3c2410_sysclass,
+                                      &s3c2410_cpufreq_driver);
+}
+
+arch_initcall(s3c2410_cpufreq_init);
+
+static int s3c2410a_cpufreq_add(struct sys_device *sysdev)
+{
+        /* alter the maximum freq settings for S3C2410A. If a board knows
+         * it only has a maximum of 200, then it should register its own
+         * limits. */
+
+        s3c2410_cpufreq_info.max.fclk = 266000000;
+        s3c2410_cpufreq_info.max.hclk = 133000000;
+        s3c2410_cpufreq_info.max.pclk =  66500000;
+        s3c2410_cpufreq_info.name = "s3c2410a";
+
+        return s3c2410_cpufreq_add(sysdev);
+}
+
+static struct sysdev_driver s3c2410a_cpufreq_driver = {
+        .add            = s3c2410a_cpufreq_add,
+};
+
+static int __init s3c2410a_cpufreq_init(void)
+{
+        return sysdev_driver_register(&s3c2410a_sysclass,
+                                      &s3c2410a_cpufreq_driver);
+}
+
+arch_initcall(s3c2410a_cpufreq_init);
diff --git a/arch/arm/mach-s3c2410/dma.c b/arch/arm/mach-s3c2410/dma.c
index dbf96e60d992..63b753f56c64 100644
--- a/arch/arm/mach-s3c2410/dma.c
+++ b/arch/arm/mach-s3c2410/dma.c
@@ -164,6 +164,17 @@ static int __init s3c2410_dma_drvinit(void)
 }
 
 arch_initcall(s3c2410_dma_drvinit);
+
+static struct sysdev_driver s3c2410a_dma_driver = {
+        .add    = s3c2410_dma_add,
+};
+
+static int __init s3c2410a_dma_drvinit(void)
+{
+        return sysdev_driver_register(&s3c2410a_sysclass, &s3c2410a_dma_driver);
+}
+
+arch_initcall(s3c2410a_dma_drvinit);
 #endif
 
 #if defined(CONFIG_CPU_S3C2442)
diff --git a/arch/arm/mach-s3c2410/include/mach/gpio-core.h b/arch/arm/mach-s3c2410/include/mach/gpio-core.h
index 8fe192081d3a..f8b879a7973c 100644
--- a/arch/arm/mach-s3c2410/include/mach/gpio-core.h
+++ b/arch/arm/mach-s3c2410/include/mach/gpio-core.h
@@ -28,7 +28,7 @@ static inline struct s3c_gpio_chip *s3c_gpiolib_getchip(unsigned int pin)
                 return NULL;
 
         chip = &s3c24xx_gpios[pin/32];
-        return (S3C2410_GPIO_OFFSET(pin) > chip->chip.ngpio) ? chip : NULL;
+        return (S3C2410_GPIO_OFFSET(pin) < chip->chip.ngpio) ? chip : NULL;
 }
 
 #endif /* __ASM_ARCH_GPIO_CORE_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/irqs.h b/arch/arm/mach-s3c2410/include/mach/irqs.h
index 2a2384ffa7b1..6c12c6312ad8 100644
--- a/arch/arm/mach-s3c2410/include/mach/irqs.h
+++ b/arch/arm/mach-s3c2410/include/mach/irqs.h
@@ -164,6 +164,12 @@
 #define IRQ_S3CUART_TX3         IRQ_S3C2443_TX3
 #define IRQ_S3CUART_ERR3        IRQ_S3C2443_ERR3
 
+#ifdef CONFIG_CPU_S3C2440
+#define IRQ_S3C244x_AC97 IRQ_S3C2440_AC97
+#else
+#define IRQ_S3C244x_AC97 IRQ_S3C2443_AC97
+#endif
+
 /* Our FIQs are routable from IRQ_EINT0 to IRQ_ADCPARENT */
 #define FIQ_START               IRQ_EINT0
 
diff --git a/arch/arm/mach-s3c2410/include/mach/map.h b/arch/arm/mach-s3c2410/include/mach/map.h
index e99b212cb1ca..b049e61460b6 100644
--- a/arch/arm/mach-s3c2410/include/mach/map.h
+++ b/arch/arm/mach-s3c2410/include/mach/map.h
@@ -67,6 +67,13 @@
 #define S3C2443_PA_HSMMC   (0x4A800000)
 #define S3C2443_SZ_HSMMC   (256)
 
+/* S3C2412 memory and IO controls */
+#define S3C2412_PA_SSMC (0x4F000000)
+#define S3C2412_VA_SSMC S3C_ADDR_CPU(0x00000000)
+
+#define S3C2412_PA_EBI  (0x48800000)
+#define S3C2412_VA_EBI  S3C_ADDR_CPU(0x00010000)
+
 /* physical addresses of all the chip-select areas */
 
 #define S3C2410_CS0 (0x00000000)
@@ -103,5 +110,6 @@
 #define S3C_PA_UART         S3C24XX_PA_UART
 #define S3C_PA_USBHOST  S3C2410_PA_USBHOST
 #define S3C_PA_HSMMC0       S3C2443_PA_HSMMC
+#define S3C_PA_NAND         S3C24XX_PA_NAND
 
 #endif /* __ASM_ARCH_MAP_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-gpio.h b/arch/arm/mach-s3c2410/include/mach/regs-gpio.h
index b278d0c45ccf..f6e8eec879c8 100644
--- a/arch/arm/mach-s3c2410/include/mach/regs-gpio.h
+++ b/arch/arm/mach-s3c2410/include/mach/regs-gpio.h
@@ -328,13 +328,15 @@
 
 #define S3C2410_GPD8_VD16       (0x02 << 16)
 #define S3C2400_GPD8_TOUT3      (0x02 << 16)
+#define S3C2440_GPD8_SPIMISO1   (0x03 << 16)
 
 #define S3C2410_GPD9_VD17       (0x02 << 18)
 #define S3C2400_GPD9_TCLK0      (0x02 << 18)
-#define S3C2410_GPD9_MASK       (0x03 << 18)
+#define S3C2440_GPD9_SPIMOSI1   (0x03 << 18)
 
 #define S3C2410_GPD10_VD18      (0x02 << 20)
 #define S3C2400_GPD10_nWAIT     (0x02 << 20)
+#define S3C2440_GPD10_SPICLK1   (0x03 << 20)
 
 #define S3C2410_GPD11_VD19      (0x02 << 22)
 
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-mem.h b/arch/arm/mach-s3c2410/include/mach/regs-mem.h
index 57759804e2fa..7f7c52947963 100644
--- a/arch/arm/mach-s3c2410/include/mach/regs-mem.h
+++ b/arch/arm/mach-s3c2410/include/mach/regs-mem.h
@@ -73,6 +73,16 @@
 #define S3C2410_BWSCON_WS7              (1<<30)
 #define S3C2410_BWSCON_ST7              (1<<31)
 
+/* accesor functions for getting BANK(n) configuration. (n != 0) */
+
+#define S3C2410_BWSCON_GET(_bwscon, _bank) (((_bwscon) >> ((_bank) * 4)) & 0xf)
+
+#define S3C2410_BWSCON_DW8              (0)
+#define S3C2410_BWSCON_DW16             (1)
+#define S3C2410_BWSCON_DW32             (2)
+#define S3C2410_BWSCON_WS               (1 << 2)
+#define S3C2410_BWSCON_ST               (1 << 3)
+
 /* memory set (rom, ram) */
 #define S3C2410_BANKCON0                S3C2410_MEMREG(0x0004)
 #define S3C2410_BANKCON1                S3C2410_MEMREG(0x0008)
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-s3c2412-mem.h b/arch/arm/mach-s3c2410/include/mach/regs-s3c2412-mem.h
index a4bf27123170..fb6352515090 100644
--- a/arch/arm/mach-s3c2410/include/mach/regs-s3c2412-mem.h
+++ b/arch/arm/mach-s3c2410/include/mach/regs-s3c2412-mem.h
@@ -14,9 +14,11 @@
 #ifndef __ASM_ARM_REGS_S3C2412_MEM
 #define __ASM_ARM_REGS_S3C2412_MEM
 
-#ifndef S3C2412_MEMREG
 #define S3C2412_MEMREG(x) (S3C24XX_VA_MEMCTRL + (x))
-#endif
+#define S3C2412_EBIREG(x) (S3C2412_VA_EBI + (x))
+
+#define S3C2412_SSMCREG(x) (S3C2412_VA_SSMC + (x))
+#define S3C2412_SSMC(x, o) (S3C2412_SSMCREG((x * 0x20) + (o)))
 
 #define S3C2412_BANKCFG                 S3C2412_MEMREG(0x00)
 #define S3C2412_BANKCON1                S3C2412_MEMREG(0x04)
@@ -26,4 +28,21 @@
 #define S3C2412_REFRESH                 S3C2412_MEMREG(0x10)
 #define S3C2412_TIMEOUT                 S3C2412_MEMREG(0x14)
 
+/* EBI control registers */
+
+#define S3C2412_EBI_PR                  S3C2412_EBIREG(0x00)
+#define S3C2412_EBI_BANKCFG             S3C2412_EBIREG(0x04)
+
+/* SSMC control registers */
+
+#define S3C2412_SSMC_BANK(x)            S3C2412_SSMC(x, 0x00)
+#define S3C2412_SMIDCYR(x)              S3C2412_SSMC(x, 0x00)
+#define S3C2412_SMBWSTRD(x)             S3C2412_SSMC(x, 0x04)
+#define S3C2412_SMBWSTWRR(x)            S3C2412_SSMC(x, 0x08)
+#define S3C2412_SMBWSTOENR(x)           S3C2412_SSMC(x, 0x0C)
+#define S3C2412_SMBWSTWENR(x)           S3C2412_SSMC(x, 0x10)
+#define S3C2412_SMBCR(x)                S3C2412_SSMC(x, 0x14)
+#define S3C2412_SMBSR(x)                S3C2412_SSMC(x, 0x18)
+#define S3C2412_SMBWSTBRDR(x)           S3C2412_SSMC(x, 0x1C)
+
 #endif /*  __ASM_ARM_REGS_S3C2412_MEM */
diff --git a/arch/arm/mach-s3c2410/include/mach/spi.h b/arch/arm/mach-s3c2410/include/mach/spi.h
index 1d300fb112b1..193b39d654ed 100644
--- a/arch/arm/mach-s3c2410/include/mach/spi.h
+++ b/arch/arm/mach-s3c2410/include/mach/spi.h
@@ -30,4 +30,7 @@ extern void s3c24xx_spi_gpiocfg_bus0_gpe11_12_13(struct s3c2410_spi_info *spi,
 extern void s3c24xx_spi_gpiocfg_bus1_gpg5_6_7(struct s3c2410_spi_info *spi,
                                               int enable);
 
+extern void s3c24xx_spi_gpiocfg_bus1_gpd8_9_10(struct s3c2410_spi_info *spi,
+                                               int enable);
+
 #endif /* __ASM_ARCH_SPI_H */
diff --git a/arch/arm/mach-s3c2410/irq.c b/arch/arm/mach-s3c2410/irq.c
index 92150399563b..5e2f35332056 100644
--- a/arch/arm/mach-s3c2410/irq.c
+++ b/arch/arm/mach-s3c2410/irq.c
@@ -39,9 +39,22 @@ static struct sysdev_driver s3c2410_irq_driver = {
         .resume         = s3c24xx_irq_resume,
 };
 
-static int s3c2410_irq_init(void)
+static int __init s3c2410_irq_init(void)
 {
         return sysdev_driver_register(&s3c2410_sysclass, &s3c2410_irq_driver);
 }
 
 arch_initcall(s3c2410_irq_init);
+
+static struct sysdev_driver s3c2410a_irq_driver = {
+        .add            = s3c2410_irq_add,
+        .suspend        = s3c24xx_irq_suspend,
+        .resume         = s3c24xx_irq_resume,
+};
+
+static int __init s3c2410a_irq_init(void)
+{
+        return sysdev_driver_register(&s3c2410a_sysclass, &s3c2410a_irq_driver);
+}
+
+arch_initcall(s3c2410a_irq_init);
diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c
index ce3baba2cd7f..647c9adb018f 100644
--- a/arch/arm/mach-s3c2410/mach-bast.c
+++ b/arch/arm/mach-s3c2410/mach-bast.c
@@ -45,6 +45,7 @@
 #include <mach/regs-mem.h>
 #include <mach/regs-lcd.h>
 
+#include <plat/hwmon.h>
 #include <plat/nand.h>
 #include <plat/iic.h>
 #include <mach/fb.h>
@@ -59,6 +60,7 @@
 #include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
+#include <plat/cpu-freq.h>
 
 #include "usb-simtec.h"
 #include "nor-simtec.h"
@@ -547,7 +549,35 @@ static struct i2c_board_info bast_i2c_devs[] __initdata = {
         },
 };
 
+static struct s3c_hwmon_pdata bast_hwmon_info = {
+        /* LCD contrast (0-6.6V) */
+        .in[0] = &(struct s3c_hwmon_chcfg) {
+                .name           = "lcd-contrast",
+                .mult           = 3300,
+                .div            = 512,
+        },
+        /* LED current feedback */
+        .in[1] = &(struct s3c_hwmon_chcfg) {
+                .name           = "led-feedback",
+                .mult           = 3300,
+                .div            = 1024,
+        },
+        /* LCD feedback (0-6.6V) */
+        .in[2] = &(struct s3c_hwmon_chcfg) {
+                .name           = "lcd-feedback",
+                .mult           = 3300,
+                .div            = 512,
+        },
+        /* Vcore (1.8-2.0V), Vref 3.3V  */
+        .in[3] = &(struct s3c_hwmon_chcfg) {
+                .name           = "vcore",
+                .mult           = 3300,
+                .div            = 1024,
+        },
+};
+
 /* Standard BAST devices */
+// cat /sys/devices/platform/s3c24xx-adc/s3c-hwmon/in_0
 
 static struct platform_device *bast_devices[] __initdata = {
         &s3c_device_usb,
@@ -556,6 +586,8 @@ static struct platform_device *bast_devices[] __initdata = {
         &s3c_device_i2c0,
         &s3c_device_rtc,
         &s3c_device_nand,
+        &s3c_device_adc,
+        &s3c_device_hwmon,
         &bast_device_dm9k,
         &bast_device_asix,
         &bast_device_axpp,
@@ -570,6 +602,12 @@ static struct clk *bast_clocks[] __initdata = {
         &s3c24xx_uclk,
 };
 
+static struct s3c_cpufreq_board __initdata bast_cpufreq = {
+        .refresh        = 7800, /* 7.8usec */
+        .auto_io        = 1,
+        .need_io        = 1,
+};
+
 static void __init bast_map_io(void)
 {
         /* initialise the clocks */
@@ -588,6 +626,7 @@ static void __init bast_map_io(void)
         s3c24xx_register_clocks(bast_clocks, ARRAY_SIZE(bast_clocks));
 
         s3c_device_nand.dev.platform_data = &bast_nand_info;
+        s3c_device_hwmon.dev.platform_data = &bast_hwmon_info;
 
         s3c24xx_init_io(bast_iodesc, ARRAY_SIZE(bast_iodesc));
         s3c24xx_init_clocks(0);
@@ -608,6 +647,8 @@ static void __init bast_init(void)
 
         usb_simtec_init();
         nor_simtec_init();
+
+        s3c_cpufreq_setboard(&bast_cpufreq);
 }
 
 MACHINE_START(BAST, "Simtec-BAST")
diff --git a/arch/arm/mach-s3c2410/pll.c b/arch/arm/mach-s3c2410/pll.c
new file mode 100644
index 000000000000..f178c2fd9d85
--- /dev/null
+++ b/arch/arm/mach-s3c2410/pll.c
@@ -0,0 +1,95 @@
+/* arch/arm/mach-s3c2410/pll.c
+ *
+ * Copyright (c) 2006,2007 Simtec Electronics
+ *      http://armlinux.simtec.co.uk/
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      Vincent Sanders <vince@arm.linux.org.uk>
+ *
+ * S3C2410 CPU PLL tables
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+*/
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/sysdev.h>
+#include <linux/list.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+
+#include <plat/cpu.h>
+#include <plat/cpu-freq-core.h>
+
+static struct cpufreq_frequency_table pll_vals_12MHz[] = {
+    { .frequency = 34000000,  .index = PLLVAL(82, 2, 3),   },
+    { .frequency = 45000000,  .index = PLLVAL(82, 1, 3),   },
+    { .frequency = 51000000,  .index = PLLVAL(161, 3, 3),  },
+    { .frequency = 48000000,  .index = PLLVAL(120, 2, 3),  },
+    { .frequency = 56000000,  .index = PLLVAL(142, 2, 3),  },
+    { .frequency = 68000000,  .index = PLLVAL(82, 2, 2),   },
+    { .frequency = 79000000,  .index = PLLVAL(71, 1, 2),   },
+    { .frequency = 85000000,  .index = PLLVAL(105, 2, 2),  },
+    { .frequency = 90000000,  .index = PLLVAL(112, 2, 2),  },
+    { .frequency = 101000000, .index = PLLVAL(127, 2, 2),  },
+    { .frequency = 113000000, .index = PLLVAL(105, 1, 2),  },
+    { .frequency = 118000000, .index = PLLVAL(150, 2, 2),  },
+    { .frequency = 124000000, .index = PLLVAL(116, 1, 2),  },
+    { .frequency = 135000000, .index = PLLVAL(82, 2, 1),   },
+    { .frequency = 147000000, .index = PLLVAL(90, 2, 1),   },
+    { .frequency = 152000000, .index = PLLVAL(68, 1, 1),   },
+    { .frequency = 158000000, .index = PLLVAL(71, 1, 1),   },
+    { .frequency = 170000000, .index = PLLVAL(77, 1, 1),   },
+    { .frequency = 180000000, .index = PLLVAL(82, 1, 1),   },
+    { .frequency = 186000000, .index = PLLVAL(85, 1, 1),   },
+    { .frequency = 192000000, .index = PLLVAL(88, 1, 1),   },
+    { .frequency = 203000000, .index = PLLVAL(161, 3, 1),  },
+
+    /* 2410A extras */
+
+    { .frequency = 210000000, .index = PLLVAL(132, 2, 1),  },
+    { .frequency = 226000000, .index = PLLVAL(105, 1, 1),  },
+    { .frequency = 266000000, .index = PLLVAL(125, 1, 1),  },
+    { .frequency = 268000000, .index = PLLVAL(126, 1, 1),  },
+    { .frequency = 270000000, .index = PLLVAL(127, 1, 1),  },
+};
+
+static int s3c2410_plls_add(struct sys_device *dev)
+{
+        return s3c_plltab_register(pll_vals_12MHz, ARRAY_SIZE(pll_vals_12MHz));
+}
+
+static struct sysdev_driver s3c2410_plls_drv = {
+        .add    = s3c2410_plls_add,
+};
+
+static int __init s3c2410_pll_init(void)
+{
+        return sysdev_driver_register(&s3c2410_sysclass, &s3c2410_plls_drv);
+
+}
+
+arch_initcall(s3c2410_pll_init);
+
+static struct sysdev_driver s3c2410a_plls_drv = {
+        .add    = s3c2410_plls_add,
+};
+
+static int __init s3c2410a_pll_init(void)
+{
+        return sysdev_driver_register(&s3c2410a_sysclass, &s3c2410a_plls_drv);
+}
+
+arch_initcall(s3c2410a_pll_init);
diff --git a/arch/arm/mach-s3c2410/pm.c b/arch/arm/mach-s3c2410/pm.c
index 143e08a599d4..966119c8efee 100644
--- a/arch/arm/mach-s3c2410/pm.c
+++ b/arch/arm/mach-s3c2410/pm.c
@@ -119,6 +119,18 @@ static int __init s3c2410_pm_drvinit(void)
 }
 
 arch_initcall(s3c2410_pm_drvinit);
+
+static struct sysdev_driver s3c2410a_pm_driver = {
+        .add            = s3c2410_pm_add,
+        .resume         = s3c2410_pm_resume,
+};
+
+static int __init s3c2410a_pm_drvinit(void)
+{
+        return sysdev_driver_register(&s3c2410a_sysclass, &s3c2410a_pm_driver);
+}
+
+arch_initcall(s3c2410a_pm_drvinit);
 #endif
 
 #if defined(CONFIG_CPU_S3C2440)
diff --git a/arch/arm/mach-s3c2410/s3c2410.c b/arch/arm/mach-s3c2410/s3c2410.c
index feb141b1f915..91ba42f688ac 100644
--- a/arch/arm/mach-s3c2410/s3c2410.c
+++ b/arch/arm/mach-s3c2410/s3c2410.c
@@ -105,17 +105,33 @@ void __init_or_cpufreq s3c2410_setup_clocks(void)
         s3c24xx_setup_clocks(fclk, hclk, pclk);
 }
 
+/* fake ARMCLK for use with cpufreq, etc. */
+
+static struct clk s3c2410_armclk = {
+        .name   = "armclk",
+        .parent = &clk_f,
+        .id     = -1,
+};
+
 void __init s3c2410_init_clocks(int xtal)
 {
         s3c24xx_register_baseclocks(xtal);
         s3c2410_setup_clocks();
         s3c2410_baseclk_add();
+        s3c24xx_register_clock(&s3c2410_armclk);
 }
 
 struct sysdev_class s3c2410_sysclass = {
         .name = "s3c2410-core",
 };
 
+/* Note, we would have liked to name this s3c2410-core, but we cannot
+ * register two sysdev_class with the same name.
+ */
+struct sysdev_class s3c2410a_sysclass = {
+        .name = "s3c2410a-core",
+};
+
 static struct sys_device s3c2410_sysdev = {
         .cls            = &s3c2410_sysclass,
 };
@@ -133,9 +149,22 @@ static int __init s3c2410_core_init(void)
 
 core_initcall(s3c2410_core_init);
 
+static int __init s3c2410a_core_init(void)
+{
+        return sysdev_class_register(&s3c2410a_sysclass);
+}
+
+core_initcall(s3c2410a_core_init);
+
 int __init s3c2410_init(void)
 {
         printk("S3C2410: Initialising architecture\n");
 
         return sysdev_register(&s3c2410_sysdev);
 }
+
+int __init s3c2410a_init(void)
+{
+        s3c2410_sysdev.cls = &s3c2410a_sysclass;
+        return s3c2410_init();
+}
diff --git a/arch/arm/mach-s3c2412/Kconfig b/arch/arm/mach-s3c2412/Kconfig
index 63586ffd0ae7..35c1bde89cf2 100644
--- a/arch/arm/mach-s3c2412/Kconfig
+++ b/arch/arm/mach-s3c2412/Kconfig
@@ -32,6 +32,15 @@ config S3C2412_PM
         help
           Internal config node to apply S3C2412 power management
 
+# Note, the S3C2412 IOtiming support is in plat-s3c24xx
+
+config S3C2412_CPUFREQ
+        bool
+        depends on CPU_FREQ_S3C24XX && CPU_S3C2412
+        select S3C2412_IOTIMING
+        default y
+        help
+          CPU Frequency scaling support for S3C2412 and S3C2413 SoC CPUs.
 
 menu "S3C2412 Machines"
 
diff --git a/arch/arm/mach-s3c2412/Makefile b/arch/arm/mach-s3c2412/Makefile
index 20918d5dc6a9..530ec46cbaea 100644
--- a/arch/arm/mach-s3c2412/Makefile
+++ b/arch/arm/mach-s3c2412/Makefile
@@ -15,6 +15,7 @@ obj-$(CONFIG_CPU_S3C2412)	+= clock.o
 obj-$(CONFIG_CPU_S3C2412)       += gpio.o
 obj-$(CONFIG_S3C2412_DMA)       += dma.o
 obj-$(CONFIG_S3C2412_PM)        += pm.o sleep.o
+obj-$(CONFIG_S3C2412_CPUFREQ)   += cpu-freq.o
 
 # Machine support
 
diff --git a/arch/arm/mach-s3c2412/cpu-freq.c b/arch/arm/mach-s3c2412/cpu-freq.c
new file mode 100644
index 000000000000..eb3ea1721335
--- /dev/null
+++ b/arch/arm/mach-s3c2412/cpu-freq.c
@@ -0,0 +1,257 @@
+/* linux/arch/arm/mach-s3c2412/cpu-freq.c
+ *
+ * Copyright 2008 Simtec Electronics
+ *      http://armlinux.simtec.co.uk/
+ *      Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2412 CPU Frequency scalling
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/cpufreq.h>
+#include <linux/sysdev.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/regs-clock.h>
+#include <mach/regs-s3c2412-mem.h>
+
+#include <plat/cpu.h>
+#include <plat/clock.h>
+#include <plat/cpu-freq-core.h>
+
+/* our clock resources. */
+static struct clk *xtal;
+static struct clk *fclk;
+static struct clk *hclk;
+static struct clk *armclk;
+
+/* HDIV: 1, 2, 3, 4, 6, 8 */
+
+static int s3c2412_cpufreq_calcdivs(struct s3c_cpufreq_config *cfg)
+{
+        unsigned int hdiv, pdiv, armdiv, dvs;
+        unsigned long hclk, fclk, armclk, armdiv_clk;
+        unsigned long hclk_max;
+
+        fclk = cfg->freq.fclk;
+        armclk = cfg->freq.armclk;
+        hclk_max = cfg->max.hclk;
+
+        /* We can't run hclk above armclk as at the best we have to
+         * have armclk and hclk in dvs mode. */
+
+        if (hclk_max > armclk)
+                hclk_max = armclk;
+
+        s3c_freq_dbg("%s: fclk=%lu, armclk=%lu, hclk_max=%lu\n",
+                     __func__, fclk, armclk, hclk_max);
+        s3c_freq_dbg("%s: want f=%lu, arm=%lu, h=%lu, p=%lu\n",
+                     __func__, cfg->freq.fclk, cfg->freq.armclk,
+                     cfg->freq.hclk, cfg->freq.pclk);
+
+        armdiv = fclk / armclk;
+
+        if (armdiv < 1)
+                armdiv = 1;
+        if (armdiv > 2)
+                armdiv = 2;
+
+        cfg->divs.arm_divisor = armdiv;
+        armdiv_clk = fclk / armdiv;
+
+        hdiv = armdiv_clk / hclk_max;
+        if (hdiv < 1)
+                hdiv = 1;
+
+        cfg->freq.hclk = hclk = armdiv_clk / hdiv;
+
+        /* set dvs depending on whether we reached armclk or not. */
+        cfg->divs.dvs = dvs = armclk < armdiv_clk;
+
+        /* update the actual armclk we achieved. */
+        cfg->freq.armclk = dvs ? hclk : armdiv_clk;
+
+        s3c_freq_dbg("%s: armclk %lu, hclk %lu, armdiv %d, hdiv %d, dvs %d\n",
+                     __func__, armclk, hclk, armdiv, hdiv, cfg->divs.dvs);
+
+        if (hdiv > 4)
+                goto invalid;
+
+        pdiv = (hclk > cfg->max.pclk) ? 2 : 1;
+
+        if ((hclk / pdiv) > cfg->max.pclk)
+                pdiv++;
+
+        cfg->freq.pclk = hclk / pdiv;
+
+        s3c_freq_dbg("%s: pdiv %d\n", __func__, pdiv);
+
+        if (pdiv > 2)
+                goto invalid;
+
+        pdiv *= hdiv;
+
+        /* store the result, and then return */
+
+        cfg->divs.h_divisor = hdiv * armdiv;
+        cfg->divs.p_divisor = pdiv * armdiv;
+
+        return 0;
+
+ invalid:
+        return -EINVAL;
+}
+
+static void s3c2412_cpufreq_setdivs(struct s3c_cpufreq_config *cfg)
+{
+        unsigned long clkdiv;
+        unsigned long olddiv;
+
+        olddiv = clkdiv = __raw_readl(S3C2410_CLKDIVN);
+
+        /* clear off current clock info */
+
+        clkdiv &= ~S3C2412_CLKDIVN_ARMDIVN;
+        clkdiv &= ~S3C2412_CLKDIVN_HDIVN_MASK;
+        clkdiv &= ~S3C2412_CLKDIVN_PDIVN;
+
+        if (cfg->divs.arm_divisor == 2)
+                clkdiv |= S3C2412_CLKDIVN_ARMDIVN;
+
+        clkdiv |= ((cfg->divs.h_divisor / cfg->divs.arm_divisor) - 1);
+
+        if (cfg->divs.p_divisor != cfg->divs.h_divisor)
+                clkdiv |= S3C2412_CLKDIVN_PDIVN;
+
+        s3c_freq_dbg("%s: div %08lx => %08lx\n", __func__, olddiv, clkdiv);
+        __raw_writel(clkdiv, S3C2410_CLKDIVN);
+
+        clk_set_parent(armclk, cfg->divs.dvs ? hclk : fclk);
+}
+
+static void s3c2412_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg)
+{
+        struct s3c_cpufreq_board *board = cfg->board;
+        unsigned long refresh;
+
+        s3c_freq_dbg("%s: refresh %u ns, hclk %lu\n", __func__,
+                     board->refresh, cfg->freq.hclk);
+
+        /* Reduce both the refresh time (in ns) and the frequency (in MHz)
+         * by 10 each to ensure that we do not overflow 32 bit numbers. This
+         * should work for HCLK up to 133MHz and refresh period up to 30usec.
+         */
+
+        refresh = (board->refresh / 10);
+        refresh *= (cfg->freq.hclk / 100);
+        refresh /= (1 * 1000 * 1000);   /* 10^6 */
+
+        s3c_freq_dbg("%s: setting refresh 0x%08lx\n", __func__, refresh);
+        __raw_writel(refresh, S3C2412_REFRESH);
+}
+
+/* set the default cpu frequency information, based on an 200MHz part
+ * as we have no other way of detecting the speed rating in software.
+ */
+
+static struct s3c_cpufreq_info s3c2412_cpufreq_info = {
+        .max            = {
+                .fclk   = 200000000,
+                .hclk   = 100000000,
+                .pclk   =  50000000,
+        },
+
+        .latency        = 5000000, /* 5ms */
+
+        .locktime_m     = 150,
+        .locktime_u     = 150,
+        .locktime_bits  = 16,
+
+        .name           = "s3c2412",
+        .set_refresh    = s3c2412_cpufreq_setrefresh,
+        .set_divs       = s3c2412_cpufreq_setdivs,
+        .calc_divs      = s3c2412_cpufreq_calcdivs,
+
+        .calc_iotiming  = s3c2412_iotiming_calc,
+        .set_iotiming   = s3c2412_iotiming_set,
+        .get_iotiming   = s3c2412_iotiming_get,
+
+        .resume_clocks  = s3c2412_setup_clocks,
+
+        .debug_io_show  = s3c_cpufreq_debugfs_call(s3c2412_iotiming_debugfs),
+};
+
+static int s3c2412_cpufreq_add(struct sys_device *sysdev)
+{
+        unsigned long fclk_rate;
+
+        hclk = clk_get(NULL, "hclk");
+        if (IS_ERR(hclk)) {
+                printk(KERN_ERR "%s: cannot find hclk clock\n", __func__);
+                return -ENOENT;
+        }
+
+        fclk = clk_get(NULL, "fclk");
+        if (IS_ERR(fclk)) {
+                printk(KERN_ERR "%s: cannot find fclk clock\n", __func__);
+                goto err_fclk;
+        }
+
+        fclk_rate = clk_get_rate(fclk);
+        if (fclk_rate > 200000000) {
+                printk(KERN_INFO
+                       "%s: fclk %ld MHz, assuming 266MHz capable part\n",
+                       __func__, fclk_rate / 1000000);
+                s3c2412_cpufreq_info.max.fclk = 266000000;
+                s3c2412_cpufreq_info.max.hclk = 133000000;
+                s3c2412_cpufreq_info.max.pclk =  66000000;
+        }
+
+        armclk = clk_get(NULL, "armclk");
+        if (IS_ERR(armclk)) {
+                printk(KERN_ERR "%s: cannot find arm clock\n", __func__);
+                goto err_armclk;
+        }
+
+        xtal = clk_get(NULL, "xtal");
+        if (IS_ERR(xtal)) {
+                printk(KERN_ERR "%s: cannot find xtal clock\n", __func__);
+                goto err_xtal;
+        }
+
+        return s3c_cpufreq_register(&s3c2412_cpufreq_info);
+
+err_xtal:
+        clk_put(armclk);
+err_armclk:
+        clk_put(fclk);
+err_fclk:
+        clk_put(hclk);
+
+        return -ENOENT;
+}
+
+static struct sysdev_driver s3c2412_cpufreq_driver = {
+        .add            = s3c2412_cpufreq_add,
+};
+
+static int s3c2412_cpufreq_init(void)
+{
+        return sysdev_driver_register(&s3c2412_sysclass,
+                                      &s3c2412_cpufreq_driver);
+}
+
+arch_initcall(s3c2412_cpufreq_init);
diff --git a/arch/arm/mach-s3c2412/s3c2412.c b/arch/arm/mach-s3c2412/s3c2412.c
index 5b5aba69ec3f..bef39f77729d 100644
--- a/arch/arm/mach-s3c2412/s3c2412.c
+++ b/arch/arm/mach-s3c2412/s3c2412.c
@@ -69,6 +69,18 @@ static struct map_desc s3c2412_iodesc[] __initdata = {
         IODESC_ENT(CLKPWR),
         IODESC_ENT(TIMER),
         IODESC_ENT(WATCHDOG),
+        {
+                .virtual = (unsigned long)S3C2412_VA_SSMC,
+                .pfn     = __phys_to_pfn(S3C2412_PA_SSMC),
+                .length  = SZ_1M,
+                .type    = MT_DEVICE,
+        },
+        {
+                .virtual = (unsigned long)S3C2412_VA_EBI,
+                .pfn     = __phys_to_pfn(S3C2412_PA_EBI),
+                .length  = SZ_1M,
+                .type    = MT_DEVICE,
+        },
 };
 
 /* uart registration process */
diff --git a/arch/arm/mach-s3c2440/Kconfig b/arch/arm/mach-s3c2440/Kconfig
index 8cfeaec37306..8ae1b288f7fa 100644
--- a/arch/arm/mach-s3c2440/Kconfig
+++ b/arch/arm/mach-s3c2440/Kconfig
@@ -33,6 +33,7 @@ config MACH_ANUBIS
         select PM_SIMTEC if PM
         select HAVE_PATA_PLATFORM
         select S3C24XX_GPIO_EXTRA64
+        select S3C2440_XTAL_12000000
         select S3C_DEV_USB_HOST
         help
           Say Y here if you are using the Simtec Electronics ANUBIS
@@ -44,6 +45,8 @@ config MACH_OSIRIS
         select S3C24XX_DCLK
         select PM_SIMTEC if PM
         select S3C24XX_GPIO_EXTRA128
+        select S3C2440_XTAL_12000000
+        select S3C2410_IOTIMING if S3C2440_CPUFREQ
         select S3C_DEV_USB_HOST
         help
           Say Y here if you are using the Simtec IM2440D20 module, also
@@ -52,6 +55,7 @@ config MACH_OSIRIS
 config MACH_RX3715
         bool "HP iPAQ rx3715"
         select CPU_S3C2440
+        select S3C2440_XTAL_16934400
         select PM_H1940 if PM
         help
           Say Y here if you are using the HP iPAQ rx3715.
@@ -59,6 +63,7 @@ config MACH_RX3715
 config ARCH_S3C2440
         bool "SMDK2440"
         select CPU_S3C2440
+        select S3C2440_XTAL_16934400
         select MACH_SMDK
         select S3C_DEV_USB_HOST
         help
@@ -67,6 +72,7 @@ config ARCH_S3C2440
 config MACH_NEXCODER_2440
         bool "NexVision NEXCODER 2440 Light Board"
         select CPU_S3C2440
+        select S3C2440_XTAL_12000000
         select S3C_DEV_USB_HOST
         help
           Say Y here if you are using the Nex Vision NEXCODER 2440 Light Board
@@ -75,6 +81,7 @@ config SMDK2440_CPU2440
         bool "SMDK2440 with S3C2440 CPU module"
         depends on ARCH_S3C2440
         default y if ARCH_S3C2440
+        select S3C2440_XTAL_16934400
         select CPU_S3C2440
 
 config MACH_AT2440EVB
diff --git a/arch/arm/mach-s3c2440/mach-osiris.c b/arch/arm/mach-s3c2440/mach-osiris.c
index cba064b49a64..2105a41281a4 100644
--- a/arch/arm/mach-s3c2440/mach-osiris.c
+++ b/arch/arm/mach-s3c2440/mach-osiris.c
@@ -34,6 +34,7 @@
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
+#include <plat/cpu-freq.h>
 #include <plat/regs-serial.h>
 #include <mach/regs-gpio.h>
 #include <mach/regs-mem.h>
@@ -351,6 +352,12 @@ static struct clk *osiris_clocks[] __initdata = {
         &s3c24xx_uclk,
 };
 
+static struct s3c_cpufreq_board __initdata osiris_cpufreq = {
+        .refresh        = 7800, /* refresh period is 7.8usec */
+        .auto_io        = 1,
+        .need_io        = 1,
+};
+
 static void __init osiris_map_io(void)
 {
         unsigned long flags;
@@ -402,6 +409,8 @@ static void __init osiris_init(void)
 
         s3c_i2c0_set_platdata(NULL);
 
+        s3c_cpufreq_setboard(&osiris_cpufreq);
+
         i2c_register_board_info(0, osiris_i2c_devs,
                                 ARRAY_SIZE(osiris_i2c_devs));
 
diff --git a/arch/arm/mach-s3c24a0/include/mach/map.h b/arch/arm/mach-s3c24a0/include/mach/map.h
index a01132717e34..79e4d93ea2b6 100644
--- a/arch/arm/mach-s3c24a0/include/mach/map.h
+++ b/arch/arm/mach-s3c24a0/include/mach/map.h
@@ -81,5 +81,6 @@
 
 #define S3C_PA_UART             S3C24A0_PA_UART
 #define S3C_PA_IIC              S3C24A0_PA_IIC
+#define S3C_PA_NAND             S3C24XX_PA_NAND
 
 #endif /* __ASM_ARCH_24A0_MAP_H */
diff --git a/arch/arm/mach-s3c6400/include/mach/map.h b/arch/arm/mach-s3c6400/include/mach/map.h
index 5057d9948d35..fc8b223bad4f 100644
--- a/arch/arm/mach-s3c6400/include/mach/map.h
+++ b/arch/arm/mach-s3c6400/include/mach/map.h
@@ -38,18 +38,21 @@
 #define S3C_VA_UART2            S3C_VA_UARTx(2)
 #define S3C_VA_UART3            S3C_VA_UARTx(3)
 
+#define S3C64XX_PA_NAND         (0x70200000)
 #define S3C64XX_PA_FB           (0x77100000)
 #define S3C64XX_PA_USB_HSOTG    (0x7C000000)
 #define S3C64XX_PA_WATCHDOG     (0x7E004000)
 #define S3C64XX_PA_SYSCON       (0x7E00F000)
+#define S3C64XX_PA_AC97         (0x7F001000)
 #define S3C64XX_PA_IIS0         (0x7F002000)
 #define S3C64XX_PA_IIS1         (0x7F003000)
 #define S3C64XX_PA_TIMER        (0x7F006000)
 #define S3C64XX_PA_IIC0         (0x7F004000)
+#define S3C64XX_PA_IISV4        (0x7F00D000)
 #define S3C64XX_PA_IIC1         (0x7F00F000)
 
 #define S3C64XX_PA_GPIO         (0x7F008000)
-#define S3C64XX_VA_GPIO         S3C_ADDR(0x00500000)
+#define S3C64XX_VA_GPIO         S3C_ADDR_CPU(0x00000000)
 #define S3C64XX_SZ_GPIO         SZ_4K
 
 #define S3C64XX_PA_SDRAM        (0x50000000)
@@ -57,7 +60,7 @@
 #define S3C64XX_PA_VIC1         (0x71300000)
 
 #define S3C64XX_PA_MODEM        (0x74108000)
-#define S3C64XX_VA_MODEM        S3C_ADDR(0x00600000)
+#define S3C64XX_VA_MODEM        S3C_ADDR_CPU(0x00100000)
 
 #define S3C64XX_PA_USBHOST      (0x74300000)
 
@@ -72,6 +75,7 @@
 #define S3C_PA_HSMMC2           S3C64XX_PA_HSMMC2
 #define S3C_PA_IIC              S3C64XX_PA_IIC0
 #define S3C_PA_IIC1             S3C64XX_PA_IIC1
+#define S3C_PA_NAND             S3C64XX_PA_NAND
 #define S3C_PA_FB               S3C64XX_PA_FB
 #define S3C_PA_USBHOST          S3C64XX_PA_USBHOST
 #define S3C_PA_USB_HSOTG        S3C64XX_PA_USB_HSOTG
diff --git a/arch/arm/mach-s3c6400/s3c6400.c b/arch/arm/mach-s3c6400/s3c6400.c
index 1ece887d90bb..b42bdd0f2138 100644
--- a/arch/arm/mach-s3c6400/s3c6400.c
+++ b/arch/arm/mach-s3c6400/s3c6400.c
@@ -48,6 +48,8 @@ void __init s3c6400_map_io(void)
 
         /* the i2c devices are directly compatible with s3c2440 */
         s3c_i2c0_setname("s3c2440-i2c");
+
+        s3c_device_nand.name = "s3c6400-nand";
 }
 
 void __init s3c6400_init_clocks(int xtal)
diff --git a/arch/arm/mach-s3c6410/Kconfig b/arch/arm/mach-s3c6410/Kconfig
index e63aac7f4e5a..f9d0f09f9761 100644
--- a/arch/arm/mach-s3c6410/Kconfig
+++ b/arch/arm/mach-s3c6410/Kconfig
@@ -97,3 +97,13 @@ config MACH_NCP
         select S3C64XX_SETUP_I2C1
         help
           Machine support for the Samsung NCP
+
+config MACH_HMT
+        bool "Airgoo HMT"
+        select CPU_S3C6410
+        select S3C_DEV_FB
+        select S3C_DEV_USB_HOST
+        select S3C64XX_SETUP_FB_24BPP
+        select HAVE_PWM
+        help
+          Machine support for the Airgoo HMT
diff --git a/arch/arm/mach-s3c6410/Makefile b/arch/arm/mach-s3c6410/Makefile
index 6f9deac88612..3e48c3dbf973 100644
--- a/arch/arm/mach-s3c6410/Makefile
+++ b/arch/arm/mach-s3c6410/Makefile
@@ -23,5 +23,4 @@ obj-$(CONFIG_S3C6410_SETUP_SDHCI)	+= setup-sdhci.o
 obj-$(CONFIG_MACH_ANW6410)      += mach-anw6410.o
 obj-$(CONFIG_MACH_SMDK6410)     += mach-smdk6410.o
 obj-$(CONFIG_MACH_NCP)          += mach-ncp.o
-
-
+obj-$(CONFIG_MACH_HMT)          += mach-hmt.o
diff --git a/arch/arm/mach-s3c6410/cpu.c b/arch/arm/mach-s3c6410/cpu.c
index ade904de8895..9b67c663d9d8 100644
--- a/arch/arm/mach-s3c6410/cpu.c
+++ b/arch/arm/mach-s3c6410/cpu.c
@@ -62,6 +62,8 @@ void __init s3c6410_map_io(void)
         /* the i2c devices are directly compatible with s3c2440 */
         s3c_i2c0_setname("s3c2440-i2c");
         s3c_i2c1_setname("s3c2440-i2c");
+
+        s3c_device_nand.name = "s3c6400-nand";
 }
 
 void __init s3c6410_init_clocks(int xtal)
diff --git a/arch/arm/mach-s3c6410/mach-hmt.c b/arch/arm/mach-s3c6410/mach-hmt.c
new file mode 100644
index 000000000000..c5741056193f
--- /dev/null
+++ b/arch/arm/mach-s3c6410/mach-hmt.c
@@ -0,0 +1,276 @@
+/* mach-hmt.c - Platform code for Airgoo HMT
+ *
+ * Copyright 2009 Peter Korsgaard <jacmet@sunsite.dk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/i2c.h>
+#include <linux/fb.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+#include <linux/leds.h>
+#include <linux/pwm_backlight.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/regs-fb.h>
+#include <mach/map.h>
+
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include <plat/regs-serial.h>
+#include <plat/iic.h>
+#include <plat/fb.h>
+#include <plat/nand.h>
+
+#include <plat/s3c6410.h>
+#include <plat/clock.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+
+#define UCON S3C2410_UCON_DEFAULT
+#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE)
+#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
+
+static struct s3c2410_uartcfg hmt_uartcfgs[] __initdata = {
+        [0] = {
+                .hwport      = 0,
+                .flags       = 0,
+                .ucon        = UCON,
+                .ulcon       = ULCON,
+                .ufcon       = UFCON,
+        },
+        [1] = {
+                .hwport      = 1,
+                .flags       = 0,
+                .ucon        = UCON,
+                .ulcon       = ULCON,
+                .ufcon       = UFCON,
+        },
+        [2] = {
+                .hwport      = 2,
+                .flags       = 0,
+                .ucon        = UCON,
+                .ulcon       = ULCON,
+                .ufcon       = UFCON,
+        },
+};
+
+static int hmt_bl_init(struct device *dev)
+{
+        int ret;
+
+        ret = gpio_request(S3C64XX_GPB(4), "lcd backlight enable");
+        if (!ret)
+                ret = gpio_direction_output(S3C64XX_GPB(4), 0);
+
+        return ret;
+}
+
+static int hmt_bl_notify(int brightness)
+{
+        /*
+         * translate from CIELUV/CIELAB L*->brightness, E.G. from
+         * perceived luminance to light output. Assumes range 0..25600
+         */
+        if (brightness < 0x800) {
+                /* Y = Yn * L / 903.3 */
+                brightness = (100*256 * brightness + 231245/2) / 231245;
+        } else {
+                /* Y = Yn * ((L + 16) / 116 )^3 */
+                int t = (brightness*4 + 16*1024 + 58)/116;
+                brightness = 25 * ((t * t * t + 0x100000/2) / 0x100000);
+        }
+
+        gpio_set_value(S3C64XX_GPB(4), brightness);
+
+        return brightness;
+}
+
+static void hmt_bl_exit(struct device *dev)
+{
+        gpio_free(S3C64XX_GPB(4));
+}
+
+static struct platform_pwm_backlight_data hmt_backlight_data = {
+        .pwm_id         = 1,
+        .max_brightness = 100 * 256,
+        .dft_brightness = 40 * 256,
+        .pwm_period_ns  = 1000000000 / (100 * 256 * 20),
+        .init           = hmt_bl_init,
+        .notify         = hmt_bl_notify,
+        .exit           = hmt_bl_exit,
+
+};
+
+static struct platform_device hmt_backlight_device = {
+        .name           = "pwm-backlight",
+        .dev            = {
+                .parent = &s3c_device_timer[1].dev,
+                .platform_data = &hmt_backlight_data,
+        },
+};
+
+static struct s3c_fb_pd_win hmt_fb_win0 = {
+        .win_mode       = {
+                .pixclock       = 41094,
+                .left_margin    = 8,
+                .right_margin   = 13,
+                .upper_margin   = 7,
+                .lower_margin   = 5,
+                .hsync_len      = 3,
+                .vsync_len      = 1,
+                .xres           = 800,
+                .yres           = 480,
+        },
+        .max_bpp        = 32,
+        .default_bpp    = 16,
+};
+
+/* 405566 clocks per frame => 60Hz refresh requires 24333960Hz clock */
+static struct s3c_fb_platdata hmt_lcd_pdata __initdata = {
+        .setup_gpio     = s3c64xx_fb_gpio_setup_24bpp,
+        .win[0]         = &hmt_fb_win0,
+        .vidcon0        = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
+        .vidcon1        = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+};
+
+static struct mtd_partition hmt_nand_part[] = {
+        [0] = {
+                .name   = "uboot",
+                .size   = SZ_512K,
+                .offset = 0,
+        },
+        [1] = {
+                .name   = "uboot-env1",
+                .size   = SZ_256K,
+                .offset = SZ_512K,
+        },
+        [2] = {
+                .name   = "uboot-env2",
+                .size   = SZ_256K,
+                .offset = SZ_512K + SZ_256K,
+        },
+        [3] = {
+                .name   = "kernel",
+                .size   = SZ_2M,
+                .offset = SZ_1M,
+        },
+        [4] = {
+                .name   = "rootfs",
+                .size   = MTDPART_SIZ_FULL,
+                .offset = SZ_1M + SZ_2M,
+        },
+};
+
+static struct s3c2410_nand_set hmt_nand_sets[] = {
+        [0] = {
+                .name           = "nand",
+                .nr_chips       = 1,
+                .nr_partitions  = ARRAY_SIZE(hmt_nand_part),
+                .partitions     = hmt_nand_part,
+        },
+};
+
+static struct s3c2410_platform_nand hmt_nand_info = {
+        .tacls          = 25,
+        .twrph0         = 55,
+        .twrph1         = 40,
+        .nr_sets        = ARRAY_SIZE(hmt_nand_sets),
+        .sets           = hmt_nand_sets,
+};
+
+static struct gpio_led hmt_leds[] = {
+        { /* left function keys */
+                .name                   = "left:blue",
+                .gpio                   = S3C64XX_GPO(12),
+                .default_trigger        = "default-on",
+        },
+        { /* right function keys - red */
+                .name                   = "right:red",
+                .gpio                   = S3C64XX_GPO(13),
+        },
+        { /* right function keys - green */
+                .name                   = "right:green",
+                .gpio                   = S3C64XX_GPO(14),
+        },
+        { /* right function keys - blue */
+                .name                   = "right:blue",
+                .gpio                   = S3C64XX_GPO(15),
+                .default_trigger        = "default-on",
+        },
+};
+
+static struct gpio_led_platform_data hmt_led_data = {
+        .num_leds = ARRAY_SIZE(hmt_leds),
+        .leds = hmt_leds,
+};
+
+static struct platform_device hmt_leds_device = {
+        .name                   = "leds-gpio",
+        .id                     = -1,
+        .dev.platform_data      = &hmt_led_data,
+};
+
+static struct map_desc hmt_iodesc[] = {};
+
+static struct platform_device *hmt_devices[] __initdata = {
+        &s3c_device_i2c0,
+        &s3c_device_nand,
+        &s3c_device_fb,
+        &s3c_device_usb,
+        &s3c_device_timer[1],
+        &hmt_backlight_device,
+        &hmt_leds_device,
+};
+
+static void __init hmt_map_io(void)
+{
+        s3c64xx_init_io(hmt_iodesc, ARRAY_SIZE(hmt_iodesc));
+        s3c24xx_init_clocks(12000000);
+        s3c24xx_init_uarts(hmt_uartcfgs, ARRAY_SIZE(hmt_uartcfgs));
+}
+
+static void __init hmt_machine_init(void)
+{
+        s3c_i2c0_set_platdata(NULL);
+        s3c_fb_set_platdata(&hmt_lcd_pdata);
+        s3c_device_nand.dev.platform_data = &hmt_nand_info;
+
+        gpio_request(S3C64XX_GPC(7), "usb power");
+        gpio_direction_output(S3C64XX_GPC(7), 0);
+        gpio_request(S3C64XX_GPM(0), "usb power");
+        gpio_direction_output(S3C64XX_GPM(0), 1);
+        gpio_request(S3C64XX_GPK(7), "usb power");
+        gpio_direction_output(S3C64XX_GPK(7), 1);
+        gpio_request(S3C64XX_GPF(13), "usb power");
+        gpio_direction_output(S3C64XX_GPF(13), 1);
+
+        platform_add_devices(hmt_devices, ARRAY_SIZE(hmt_devices));
+}
+
+MACHINE_START(HMT, "Airgoo-HMT")
+        /* Maintainer: Peter Korsgaard <jacmet@sunsite.dk> */
+        .phys_io        = S3C_PA_UART & 0xfff00000,
+        .io_pg_offst    = (((u32)S3C_VA_UART) >> 18) & 0xfffc,
+        .boot_params    = S3C64XX_PA_SDRAM + 0x100,
+        .init_irq       = s3c6410_init_irq,
+        .map_io         = hmt_map_io,
+        .init_machine   = hmt_machine_init,
+        .timer          = &s3c24xx_timer,
+MACHINE_END
diff --git a/arch/arm/mach-s3c6410/mach-ncp.c b/arch/arm/mach-s3c6410/mach-ncp.c
index 6030636f8548..55e9bbfaf68b 100644
--- a/arch/arm/mach-s3c6410/mach-ncp.c
+++ b/arch/arm/mach-s3c6410/mach-ncp.c
@@ -79,7 +79,7 @@ static struct platform_device *ncp_devices[] __initdata = {
         &s3c_device_i2c0,
 };
 
-struct map_desc ncp_iodesc[] = {};
+static struct map_desc ncp_iodesc[] __initdata = {};
 
 static void __init ncp_map_io(void)
 {
diff --git a/arch/arm/mach-s3c6410/mach-smdk6410.c b/arch/arm/mach-s3c6410/mach-smdk6410.c
index bc9a7dea567f..ea51dbe76e3e 100644
--- a/arch/arm/mach-s3c6410/mach-smdk6410.c
+++ b/arch/arm/mach-s3c6410/mach-smdk6410.c
@@ -65,16 +65,30 @@ static struct s3c2410_uartcfg smdk6410_uartcfgs[] __initdata = {
         [0] = {
                 .hwport      = 0,
                 .flags       = 0,
-                .ucon        = 0x3c5,
-                .ulcon       = 0x03,
-                .ufcon       = 0x51,
+                .ucon        = UCON,
+                .ulcon       = ULCON,
+                .ufcon       = UFCON,
         },
         [1] = {
                 .hwport      = 1,
                 .flags       = 0,
-                .ucon        = 0x3c5,
-                .ulcon       = 0x03,
-                .ufcon       = 0x51,
+                .ucon        = UCON,
+                .ulcon       = ULCON,
+                .ufcon       = UFCON,
+        },
+        [2] = {
+                .hwport      = 2,
+                .flags       = 0,
+                .ucon        = UCON,
+                .ulcon       = ULCON,
+                .ufcon       = UFCON,
+        },
+        [3] = {
+                .hwport      = 3,
+                .flags       = 0,
+                .ucon        = UCON,
+                .ulcon       = ULCON,
+                .ufcon       = UFCON,
         },
 };
 
diff --git a/arch/arm/mach-s5pc100/Kconfig b/arch/arm/mach-s5pc100/Kconfig
new file mode 100644
index 000000000000..b1a4ba504416
--- /dev/null
+++ b/arch/arm/mach-s5pc100/Kconfig
@@ -0,0 +1,22 @@
+# arch/arm/mach-s5pc100/Kconfig
+#
+# Copyright 2009 Samsung Electronics Co.
+#       Byungho Min <bhmin@samsung.com>
+#
+# Licensed under GPLv2
+
+# Configuration options for the S5PC100 CPU
+
+config CPU_S5PC100
+        bool
+        select CPU_S5PC100_INIT
+        select CPU_S5PC100_CLOCK
+        help
+          Enable S5PC100 CPU support
+
+config MACH_SMDKC100
+        bool "SMDKC100"
+        select CPU_S5PC100
+        select S5PC1XX_SETUP_I2C1
+        help
+          Machine support for the Samsung SMDKC100
diff --git a/arch/arm/mach-s5pc100/Makefile b/arch/arm/mach-s5pc100/Makefile
new file mode 100644
index 000000000000..afc89b381d7a
--- /dev/null
+++ b/arch/arm/mach-s5pc100/Makefile
@@ -0,0 +1,17 @@
+# arch/arm/mach-s5pc100/Makefile
+#
+# Copyright 2009 Samsung Electronics Co.
+#
+# Licensed under GPLv2
+
+obj-y                           :=
+obj-m                           :=
+obj-n                           :=
+obj-                            :=
+
+# Core support for S5PC100 system
+
+obj-$(CONFIG_CPU_S5PC100)       += cpu.o
+
+# machine support
+obj-$(CONFIG_MACH_SMDKC100)     += mach-smdkc100.o
diff --git a/arch/arm/mach-s5pc100/Makefile.boot b/arch/arm/mach-s5pc100/Makefile.boot
new file mode 100644
index 000000000000..ff90aa13bd67
--- /dev/null
+++ b/arch/arm/mach-s5pc100/Makefile.boot
@@ -0,0 +1,2 @@
+   zreladdr-y   := 0x20008000
+params_phys-y   := 0x20000100
diff --git a/arch/arm/mach-s5pc100/cpu.c b/arch/arm/mach-s5pc100/cpu.c
new file mode 100644
index 000000000000..0e718890da32
--- /dev/null
+++ b/arch/arm/mach-s5pc100/cpu.c
@@ -0,0 +1,97 @@
+/* linux/arch/arm/mach-s5pc100/cpu.c
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *      Byungho Min <bhmin@samsung.com>
+ *
+ * Based on mach-s3c6410/cpu.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/sysdev.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/map.h>
+#include <asm/irq.h>
+
+#include <plat/cpu-freq.h>
+#include <plat/regs-serial.h>
+
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/clock.h>
+#include <plat/sdhci.h>
+#include <plat/iic-core.h>
+#include <plat/s5pc100.h>
+
+/* Initial IO mappings */
+
+static struct map_desc s5pc100_iodesc[] __initdata = {
+};
+
+/* s5pc100_map_io
+ *
+ * register the standard cpu IO areas
+*/
+
+void __init s5pc100_map_io(void)
+{
+        iotable_init(s5pc100_iodesc, ARRAY_SIZE(s5pc100_iodesc));
+
+        /* initialise device information early */
+}
+
+void __init s5pc100_init_clocks(int xtal)
+{
+        printk(KERN_DEBUG "%s: initialising clocks\n", __func__);
+        s3c24xx_register_baseclocks(xtal);
+        s5pc1xx_register_clocks();
+        s5pc100_register_clocks();
+        s5pc100_setup_clocks();
+}
+
+void __init s5pc100_init_irq(void)
+{
+        u32 vic_valid[] = {~0, ~0, ~0};
+
+        /* VIC0, VIC1, and VIC2 are fully populated. */
+        s5pc1xx_init_irq(vic_valid, ARRAY_SIZE(vic_valid));
+}
+
+struct sysdev_class s5pc100_sysclass = {
+        .name   = "s5pc100-core",
+};
+
+static struct sys_device s5pc100_sysdev = {
+        .cls    = &s5pc100_sysclass,
+};
+
+static int __init s5pc100_core_init(void)
+{
+        return sysdev_class_register(&s5pc100_sysclass);
+}
+
+core_initcall(s5pc100_core_init);
+
+int __init s5pc100_init(void)
+{
+        printk(KERN_DEBUG "S5PC100: Initialising architecture\n");
+
+        return sysdev_register(&s5pc100_sysdev);
+}
diff --git a/arch/arm/mach-s5pc100/include/mach/debug-macro.S b/arch/arm/mach-s5pc100/include/mach/debug-macro.S
new file mode 100644
index 000000000000..9d142ccf654b
--- /dev/null
+++ b/arch/arm/mach-s5pc100/include/mach/debug-macro.S
@@ -0,0 +1,38 @@
+/* arch/arm/mach-s5pc100/include/mach/debug-macro.S
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *      Byungho Min <bhmin@samsung.com>
+ *
+ *
+ * Based on mach-s3c6400/include/mach/debug-macro.S
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* pull in the relevant register and map files. */
+
+#include <mach/map.h>
+#include <plat/regs-serial.h>
+
+        /* note, for the boot process to work we have to keep the UART
+         * virtual address aligned to an 1MiB boundary for the L1
+         * mapping the head code makes. We keep the UART virtual address
+         * aligned and add in the offset when we load the value here.
+         */
+
+        .macro addruart, rx
+                mrc     p15, 0, \rx, c1, c0
+                tst     \rx, #1
+                ldreq   \rx, = S3C_PA_UART
+                ldrne   \rx, = (S3C_VA_UART + S3C_PA_UART & 0xfffff)
+                add     \rx, \rx, #(0x400 * CONFIG_DEBUG_S3C_UART)
+        .endm
+
+/* include the reset of the code which will do the work, we're only
+ * compiling for a single cpu processor type so the default of s3c2440
+ * will be fine with us.
+ */
+
+#include <plat/debug-macro.S>
diff --git a/arch/arm/mach-s5pc100/include/mach/entry-macro.S b/arch/arm/mach-s5pc100/include/mach/entry-macro.S
new file mode 100644
index 000000000000..67131939e626
--- /dev/null
+++ b/arch/arm/mach-s5pc100/include/mach/entry-macro.S
@@ -0,0 +1,50 @@
+/* arch/arm/mach-s5pc100/include/mach/entry-macro.S
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *      Byungho Min <bhmin@samsung.com>
+ *
+ * Based on mach-s3c6400/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for the Samsung S5PC1XX series
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+*/
+
+#include <asm/hardware/vic.h>
+#include <mach/map.h>
+#include <plat/irqs.h>
+
+        .macro  disable_fiq
+        .endm
+
+        .macro  get_irqnr_preamble, base, tmp
+        ldr     \base, =S3C_VA_VIC0
+        .endm
+
+        .macro  arch_ret_to_user, tmp1, tmp2
+        .endm
+
+        .macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
+
+        @ check the vic0
+        mov     \irqnr, # S3C_IRQ_OFFSET + 31
+        ldr     \irqstat, [ \base, # VIC_IRQ_STATUS ]
+        teq     \irqstat, #0
+
+        @ otherwise try vic1
+        addeq   \tmp, \base, #(S3C_VA_VIC1 - S3C_VA_VIC0)
+        addeq   \irqnr, \irqnr, #32
+        ldreq   \irqstat, [ \tmp, # VIC_IRQ_STATUS ]
+        teqeq   \irqstat, #0
+
+        @ otherwise try vic2
+        addeq   \tmp, \base, #(S3C_VA_VIC2 - S3C_VA_VIC0)
+        addeq   \irqnr, \irqnr, #32
+        ldreq   \irqstat, [ \tmp, # VIC_IRQ_STATUS ]
+        teqeq   \irqstat, #0
+
+        clzne   \irqstat, \irqstat
+        subne   \irqnr, \irqnr, \irqstat
+        .endm
diff --git a/arch/arm/mach-s5pc100/include/mach/gpio-core.h b/arch/arm/mach-s5pc100/include/mach/gpio-core.h
new file mode 100644
index 000000000000..ad28d8ec8a78
--- /dev/null
+++ b/arch/arm/mach-s5pc100/include/mach/gpio-core.h
@@ -0,0 +1,21 @@
+/* arch/arm/mach-s5pc100/include/mach/gpio-core.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *      Byungho Min <bhmin@samsung.com>
+ *
+ * S5PC100 - GPIO core support
+ *
+ * Based on mach-s3c6400/include/mach/gpio-core.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_GPIO_CORE_H
+#define __ASM_ARCH_GPIO_CORE_H __FILE__
+
+/* currently we just include the platform support */
+#include <plat/gpio-core.h>
+
+#endif /* __ASM_ARCH_GPIO_CORE_H */
diff --git a/arch/arm/mach-s5pc100/include/mach/gpio.h b/arch/arm/mach-s5pc100/include/mach/gpio.h
new file mode 100644
index 000000000000..c74fc93d7d15
--- /dev/null
+++ b/arch/arm/mach-s5pc100/include/mach/gpio.h
@@ -0,0 +1,146 @@
+/* arch/arm/mach-s5pc100/include/mach/gpio.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *      Byungho Min <bhmin@samsung.com>
+ *
+ * S5PC100 - GPIO lib support
+ *
+ * Base on mach-s3c6400/include/mach/gpio.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define gpio_get_value  __gpio_get_value
+#define gpio_set_value  __gpio_set_value
+#define gpio_cansleep   __gpio_cansleep
+#define gpio_to_irq     __gpio_to_irq
+
+/* GPIO bank sizes */
+#define S5PC1XX_GPIO_A0_NR      (8)
+#define S5PC1XX_GPIO_A1_NR      (5)
+#define S5PC1XX_GPIO_B_NR       (8)
+#define S5PC1XX_GPIO_C_NR       (5)
+#define S5PC1XX_GPIO_D_NR       (7)
+#define S5PC1XX_GPIO_E0_NR      (8)
+#define S5PC1XX_GPIO_E1_NR      (6)
+#define S5PC1XX_GPIO_F0_NR      (8)
+#define S5PC1XX_GPIO_F1_NR      (8)
+#define S5PC1XX_GPIO_F2_NR      (8)
+#define S5PC1XX_GPIO_F3_NR      (4)
+#define S5PC1XX_GPIO_G0_NR      (8)
+#define S5PC1XX_GPIO_G1_NR      (3)
+#define S5PC1XX_GPIO_G2_NR      (7)
+#define S5PC1XX_GPIO_G3_NR      (7)
+#define S5PC1XX_GPIO_H0_NR      (8)
+#define S5PC1XX_GPIO_H1_NR      (8)
+#define S5PC1XX_GPIO_H2_NR      (8)
+#define S5PC1XX_GPIO_H3_NR      (8)
+#define S5PC1XX_GPIO_I_NR       (8)
+#define S5PC1XX_GPIO_J0_NR      (8)
+#define S5PC1XX_GPIO_J1_NR      (5)
+#define S5PC1XX_GPIO_J2_NR      (8)
+#define S5PC1XX_GPIO_J3_NR      (8)
+#define S5PC1XX_GPIO_J4_NR      (4)
+#define S5PC1XX_GPIO_K0_NR      (8)
+#define S5PC1XX_GPIO_K1_NR      (6)
+#define S5PC1XX_GPIO_K2_NR      (8)
+#define S5PC1XX_GPIO_K3_NR      (8)
+#define S5PC1XX_GPIO_MP00_NR    (8)
+#define S5PC1XX_GPIO_MP01_NR    (8)
+#define S5PC1XX_GPIO_MP02_NR    (8)
+#define S5PC1XX_GPIO_MP03_NR    (8)
+#define S5PC1XX_GPIO_MP04_NR    (5)
+
+/* GPIO bank numbes */
+
+/* CONFIG_S3C_GPIO_SPACE allows the user to select extra
+ * space for debugging purposes so that any accidental
+ * change from one gpio bank to another can be caught.
+*/
+
+#define S5PC1XX_GPIO_NEXT(__gpio) \
+        ((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 1)
+
+enum s3c_gpio_number {
+        S5PC1XX_GPIO_A0_START   = 0,
+        S5PC1XX_GPIO_A1_START   = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_A0),
+        S5PC1XX_GPIO_B_START    = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_A1),
+        S5PC1XX_GPIO_C_START    = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_B),
+        S5PC1XX_GPIO_D_START    = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_C),
+        S5PC1XX_GPIO_E0_START   = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_D),
+        S5PC1XX_GPIO_E1_START   = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_E0),
+        S5PC1XX_GPIO_F0_START   = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_E1),
+        S5PC1XX_GPIO_F1_START   = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_F0),
+        S5PC1XX_GPIO_F2_START   = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_F1),
+        S5PC1XX_GPIO_F3_START   = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_F2),
+        S5PC1XX_GPIO_G0_START   = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_F3),
+        S5PC1XX_GPIO_G1_START   = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_G0),
+        S5PC1XX_GPIO_G2_START   = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_G1),
+        S5PC1XX_GPIO_G3_START   = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_G2),
+        S5PC1XX_GPIO_H0_START   = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_G3),
+        S5PC1XX_GPIO_H1_START   = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_H0),
+        S5PC1XX_GPIO_H2_START   = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_H1),
+        S5PC1XX_GPIO_H3_START   = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_H2),
+        S5PC1XX_GPIO_I_START    = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_H3),
+        S5PC1XX_GPIO_J0_START   = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_I),
+        S5PC1XX_GPIO_J1_START   = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_J0),
+        S5PC1XX_GPIO_J2_START   = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_J1),
+        S5PC1XX_GPIO_J3_START   = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_J2),
+        S5PC1XX_GPIO_J4_START   = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_J3),
+        S5PC1XX_GPIO_K0_START   = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_J4),
+        S5PC1XX_GPIO_K1_START   = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_K0),
+        S5PC1XX_GPIO_K2_START   = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_K1),
+        S5PC1XX_GPIO_K3_START   = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_K2),
+        S5PC1XX_GPIO_MP00_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_K3),
+        S5PC1XX_GPIO_MP01_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_MP00),
+        S5PC1XX_GPIO_MP02_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_MP01),
+        S5PC1XX_GPIO_MP03_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_MP02),
+        S5PC1XX_GPIO_MP04_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_MP03),
+};
+
+/* S5PC1XX GPIO number definitions. */
+#define S5PC1XX_GPA0(_nr)       (S5PC1XX_GPIO_A0_START + (_nr))
+#define S5PC1XX_GPA1(_nr)       (S5PC1XX_GPIO_A1_START + (_nr))
+#define S5PC1XX_GPB(_nr)        (S5PC1XX_GPIO_B_START + (_nr))
+#define S5PC1XX_GPC(_nr)        (S5PC1XX_GPIO_C_START + (_nr))
+#define S5PC1XX_GPD(_nr)        (S5PC1XX_GPIO_D_START + (_nr))
+#define S5PC1XX_GPE0(_nr)       (S5PC1XX_GPIO_E0_START + (_nr))
+#define S5PC1XX_GPE1(_nr)       (S5PC1XX_GPIO_E1_START + (_nr))
+#define S5PC1XX_GPF0(_nr)       (S5PC1XX_GPIO_F0_START + (_nr))
+#define S5PC1XX_GPF1(_nr)       (S5PC1XX_GPIO_F1_START + (_nr))
+#define S5PC1XX_GPF2(_nr)       (S5PC1XX_GPIO_F2_START + (_nr))
+#define S5PC1XX_GPF3(_nr)       (S5PC1XX_GPIO_F3_START + (_nr))
+#define S5PC1XX_GPG0(_nr)       (S5PC1XX_GPIO_G0_START + (_nr))
+#define S5PC1XX_GPG1(_nr)       (S5PC1XX_GPIO_G1_START + (_nr))
+#define S5PC1XX_GPG2(_nr)       (S5PC1XX_GPIO_G2_START + (_nr))
+#define S5PC1XX_GPG3(_nr)       (S5PC1XX_GPIO_G3_START + (_nr))
+#define S5PC1XX_GPH0(_nr)       (S5PC1XX_GPIO_H0_START + (_nr))
+#define S5PC1XX_GPH1(_nr)       (S5PC1XX_GPIO_H1_START + (_nr))
+#define S5PC1XX_GPH2(_nr)       (S5PC1XX_GPIO_H2_START + (_nr))
+#define S5PC1XX_GPH3(_nr)       (S5PC1XX_GPIO_H3_START + (_nr))
+#define S5PC1XX_GPI(_nr)        (S5PC1XX_GPIO_I_START + (_nr))
+#define S5PC1XX_GPJ0(_nr)       (S5PC1XX_GPIO_J0_START + (_nr))
+#define S5PC1XX_GPJ1(_nr)       (S5PC1XX_GPIO_J1_START + (_nr))
+#define S5PC1XX_GPJ2(_nr)       (S5PC1XX_GPIO_J2_START + (_nr))
+#define S5PC1XX_GPJ3(_nr)       (S5PC1XX_GPIO_J3_START + (_nr))
+#define S5PC1XX_GPJ4(_nr)       (S5PC1XX_GPIO_J4_START + (_nr))
+#define S5PC1XX_GPK0(_nr)       (S5PC1XX_GPIO_K0_START + (_nr))
+#define S5PC1XX_GPK1(_nr)       (S5PC1XX_GPIO_K1_START + (_nr))
+#define S5PC1XX_GPK2(_nr)       (S5PC1XX_GPIO_K2_START + (_nr))
+#define S5PC1XX_GPK3(_nr)       (S5PC1XX_GPIO_K3_START + (_nr))
+#define S5PC1XX_MP00(_nr)       (S5PC1XX_GPIO_MP00_START + (_nr))
+#define S5PC1XX_MP01(_nr)       (S5PC1XX_GPIO_MP01_START + (_nr))
+#define S5PC1XX_MP02(_nr)       (S5PC1XX_GPIO_MP02_START + (_nr))
+#define S5PC1XX_MP03(_nr)       (S5PC1XX_GPIO_MP03_START + (_nr))
+#define S5PC1XX_MP04(_nr)       (S5PC1XX_GPIO_MP04_START + (_nr))
+
+/* the end of the S5PC1XX specific gpios */
+#define S5PC1XX_GPIO_END        (S5PC1XX_MP04(S5PC1XX_GPIO_MP04_NR) + 1)
+#define S3C_GPIO_END            S5PC1XX_GPIO_END
+
+/* define the number of gpios we need to the one after the MP04() range */
+#define ARCH_NR_GPIOS   (S5PC1XX_MP04(S5PC1XX_GPIO_MP04_NR) + 1)
+
+#include <asm-generic/gpio.h>
diff --git a/arch/arm/mach-s5pc100/include/mach/hardware.h b/arch/arm/mach-s5pc100/include/mach/hardware.h
new file mode 100644
index 000000000000..6b38618c2fd9
--- /dev/null
+++ b/arch/arm/mach-s5pc100/include/mach/hardware.h
@@ -0,0 +1,14 @@
+/* linux/arch/arm/mach-s5pc100/include/mach/hardware.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *      Byungho Min <bhmin@samsung.com>
+ *
+ * S5PC100 - Hardware support
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H __FILE__
+
+/* currently nothing here, placeholder */
+
+#endif /* __ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/mach-s5pc100/include/mach/irqs.h b/arch/arm/mach-s5pc100/include/mach/irqs.h
new file mode 100644
index 000000000000..622720dba289
--- /dev/null
+++ b/arch/arm/mach-s5pc100/include/mach/irqs.h
@@ -0,0 +1,14 @@
+/* linux/arch/arm/mach-s5pc100/include/mach/irqs.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *      Byungho Min <bhmin@samsung.com>
+ *
+ * S5PC100 - IRQ definitions
+ */
+
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H __FILE__
+
+#include <plat/irqs.h>
+
+#endif /* __ASM_ARCH_IRQ_H */
diff --git a/arch/arm/mach-s5pc100/include/mach/map.h b/arch/arm/mach-s5pc100/include/mach/map.h
new file mode 100644
index 000000000000..9e9f39130b2c
--- /dev/null
+++ b/arch/arm/mach-s5pc100/include/mach/map.h
@@ -0,0 +1,75 @@
+/* linux/arch/arm/mach-s5pc100/include/mach/map.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *      Byungho Min <bhmin@samsung.com>
+ *
+ * Based on mach-s3c6400/include/mach/map.h
+ *
+ * S5PC1XX - Memory map definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_MAP_H
+#define __ASM_ARCH_MAP_H __FILE__
+
+#include <plat/map-base.h>
+
+
+/* Chip ID */
+#define S5PC100_PA_CHIPID       (0xE0000000)
+#define S5PC1XX_PA_CHIPID       S5PC100_PA_CHIPID
+#define S5PC1XX_VA_CHIPID       S3C_VA_SYS
+
+/* System */
+#define S5PC100_PA_SYS          (0xE0100000)
+#define S5PC100_PA_CLK          (S5PC100_PA_SYS + 0x0)
+#define S5PC100_PA_PWR          (S5PC100_PA_SYS + 0x8000)
+#define S5PC1XX_PA_CLK          S5PC100_PA_CLK
+#define S5PC1XX_PA_PWR          S5PC100_PA_PWR
+#define S5PC1XX_VA_CLK          (S3C_VA_SYS + 0x10000)
+#define S5PC1XX_VA_PWR          (S3C_VA_SYS + 0x20000)
+
+/* Interrupt */
+#define S5PC100_PA_VIC          (0xE4000000)
+#define S5PC100_VA_VIC          S3C_VA_IRQ
+#define S5PC100_PA_VIC_OFFSET   0x100000
+#define S5PC100_VA_VIC_OFFSET   0x10000
+#define S5PC1XX_PA_VIC(x)       (S5PC100_PA_VIC + ((x) * S5PC100_PA_VIC_OFFSET))
+#define S5PC1XX_VA_VIC(x)       (S5PC100_VA_VIC + ((x) * S5PC100_VA_VIC_OFFSET))
+
+/* Timer */
+#define S5PC100_PA_TIMER        (0xEA000000)
+#define S5PC1XX_PA_TIMER        S5PC100_PA_TIMER
+#define S5PC1XX_VA_TIMER        S3C_VA_TIMER
+
+/* UART */
+#define S5PC100_PA_UART         (0xEC000000)
+#define S5PC1XX_PA_UART         S5PC100_PA_UART
+#define S5PC1XX_VA_UART         S3C_VA_UART
+
+/* IIC */
+#define S5PC100_PA_IIC          (0xEC100000)
+
+/* ETC */
+#define S5PC100_PA_SDRAM        (0x20000000)
+
+/* compatibility defines. */
+#define S3C_PA_UART             S5PC100_PA_UART
+#define S3C_PA_UART0            (S5PC100_PA_UART + 0x0)
+#define S3C_PA_UART1            (S5PC100_PA_UART + 0x400)
+#define S3C_PA_UART2            (S5PC100_PA_UART + 0x800)
+#define S3C_PA_UART3            (S5PC100_PA_UART + 0xC00)
+#define S3C_VA_UART0            (S3C_VA_UART + 0x0)
+#define S3C_VA_UART1            (S3C_VA_UART + 0x400)
+#define S3C_VA_UART2            (S3C_VA_UART + 0x800)
+#define S3C_VA_UART3            (S3C_VA_UART + 0xC00)
+#define S3C_UART_OFFSET         0x400
+#define S3C_VA_VIC0             (S3C_VA_IRQ + 0x0)
+#define S3C_VA_VIC1             (S3C_VA_IRQ + 0x10000)
+#define S3C_VA_VIC2             (S3C_VA_IRQ + 0x20000)
+#define S3C_PA_IIC              S5PC100_PA_IIC
+
+#endif /* __ASM_ARCH_C100_MAP_H */
diff --git a/arch/arm/mach-s5pc100/include/mach/memory.h b/arch/arm/mach-s5pc100/include/mach/memory.h
new file mode 100644
index 000000000000..4b60d18179f7
--- /dev/null
+++ b/arch/arm/mach-s5pc100/include/mach/memory.h
@@ -0,0 +1,18 @@
+/* arch/arm/mach-s5pc100/include/mach/memory.h
+ *
+ * Copyright 2008 Samsung Electronics Co.
+ *      Byungho Min <bhmin@samsung.com>
+ *
+ * Based on mach-s3c6400/include/mach/memory.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#define PHYS_OFFSET             UL(0x20000000)
+
+#endif
diff --git a/arch/arm/mach-s5pc100/include/mach/pwm-clock.h b/arch/arm/mach-s5pc100/include/mach/pwm-clock.h
new file mode 100644
index 000000000000..b34d2f7aae52
--- /dev/null
+++ b/arch/arm/mach-s5pc100/include/mach/pwm-clock.h
@@ -0,0 +1,56 @@
+/* linux/arch/arm/mach-s5pc100/include/mach/pwm-clock.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *      Byungho Min <bhmin@samsung.com>
+ *
+ * S5PC100 - pwm clock and timer support
+ *
+ * Based on mach-s3c6400/include/mach/pwm-clock.h
+ */
+
+/**
+ * pwm_cfg_src_is_tclk() - return whether the given mux config is a tclk
+ * @tcfg: The timer TCFG1 register bits shifted down to 0.
+ *
+ * Return true if the given configuration from TCFG1 is a TCLK instead
+ * any of the TDIV clocks.
+ */
+static inline int pwm_cfg_src_is_tclk(unsigned long tcfg)
+{
+        return tcfg >= S3C64XX_TCFG1_MUX_TCLK;
+}
+
+/**
+ * tcfg_to_divisor() - convert tcfg1 setting to a divisor
+ * @tcfg1: The tcfg1 setting, shifted down.
+ *
+ * Get the divisor value for the given tcfg1 setting. We assume the
+ * caller has already checked to see if this is not a TCLK source.
+ */
+static inline unsigned long tcfg_to_divisor(unsigned long tcfg1)
+{
+        return 1 << tcfg1;
+}
+
+/**
+ * pwm_tdiv_has_div1() - does the tdiv setting have a /1
+ *
+ * Return true if we have a /1 in the tdiv setting.
+ */
+static inline unsigned int pwm_tdiv_has_div1(void)
+{
+        return 1;
+}
+
+/**
+ * pwm_tdiv_div_bits() - calculate TCFG1 divisor value.
+ * @div: The divisor to calculate the bit information for.
+ *
+ * Turn a divisor into the necessary bit field for TCFG1.
+ */
+static inline unsigned long pwm_tdiv_div_bits(unsigned int div)
+{
+        return ilog2(div);
+}
+
+#define S3C_TCFG1_MUX_TCLK S3C64XX_TCFG1_MUX_TCLK
diff --git a/arch/arm/mach-s5pc100/include/mach/regs-irq.h b/arch/arm/mach-s5pc100/include/mach/regs-irq.h
new file mode 100644
index 000000000000..751ac15438c8
--- /dev/null
+++ b/arch/arm/mach-s5pc100/include/mach/regs-irq.h
@@ -0,0 +1,24 @@
+/* linux/arch/arm/mach-s5pc100/include/mach/regs-irq.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *      Byungho Min <bhmin@samsung.com>
+ *
+ * S5PC1XX - IRQ register definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_REGS_IRQ_H
+#define __ASM_ARCH_REGS_IRQ_H __FILE__
+
+#include <mach/map.h>
+#include <asm/hardware/vic.h>
+
+/* interrupt controller */
+#define S5PC1XX_VIC0REG(x)                      ((x) + S5PC1XX_VA_VIC(0))
+#define S5PC1XX_VIC1REG(x)                      ((x) + S5PC1XX_VA_VIC(1))
+#define S5PC1XX_VIC2REG(x)                      ((x) + S5PC1XX_VA_VIC(2))
+
+#endif /* __ASM_ARCH_REGS_IRQ_H */
diff --git a/arch/arm/mach-s5pc100/include/mach/system.h b/arch/arm/mach-s5pc100/include/mach/system.h
new file mode 100644
index 000000000000..e39014375470
--- /dev/null
+++ b/arch/arm/mach-s5pc100/include/mach/system.h
@@ -0,0 +1,24 @@
+/* linux/arch/arm/mach-s5pc100/include/mach/system.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *      Byungho Min <bhmin@samsung.com>
+ *
+ * S5PC1XX - system implementation
+ *
+ * Based on mach-s3c6400/include/mach/system.h
+ */
+
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H __FILE__
+
+static void arch_idle(void)
+{
+        /* nothing here yet */
+}
+
+static void arch_reset(char mode, const char *cmd)
+{
+        /* nothing here yet */
+}
+
+#endif /* __ASM_ARCH_IRQ_H */
diff --git a/arch/arm/mach-s5pc100/include/mach/tick.h b/arch/arm/mach-s5pc100/include/mach/tick.h
new file mode 100644
index 000000000000..d3de0f3591ae
--- /dev/null
+++ b/arch/arm/mach-s5pc100/include/mach/tick.h
@@ -0,0 +1,29 @@
+/* linux/arch/arm/mach-s5pc100/include/mach/tick.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *      Byungho Min <bhmin@samsung.com>
+ *
+ * S3C64XX - Timer tick support definitions
+ *
+ * Based on mach-s3c6400/include/mach/tick.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_TICK_H
+#define __ASM_ARCH_TICK_H __FILE__
+
+/* note, the timer interrutps turn up in 2 places, the vic and then
+ * the timer block. We take the VIC as the base at the moment.
+ */
+static inline u32 s3c24xx_ostimer_pending(void)
+{
+        u32 pend = __raw_readl(S3C_VA_VIC0 + VIC_RAW_STATUS);
+        return pend & 1 << (IRQ_TIMER4 - S5PC1XX_IRQ_VIC0(0));
+}
+
+#define TICK_MAX        (0xffffffff)
+
+#endif /* __ASM_ARCH_TICK_H */
diff --git a/arch/arm/mach-s5pc100/include/mach/uncompress.h b/arch/arm/mach-s5pc100/include/mach/uncompress.h
new file mode 100644
index 000000000000..01ccf535e76c
--- /dev/null
+++ b/arch/arm/mach-s5pc100/include/mach/uncompress.h
@@ -0,0 +1,28 @@
+/* arch/arm/mach-s5pc100/include/mach/uncompress.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *      Byungho Min <bhmin@samsung.com>
+ *
+ * S5PC100 - uncompress code
+ *
+ * Based on mach-s3c6400/include/mach/uncompress.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_UNCOMPRESS_H
+#define __ASM_ARCH_UNCOMPRESS_H
+
+#include <mach/map.h>
+#include <plat/uncompress.h>
+
+static void arch_detect_cpu(void)
+{
+        /* we do not need to do any cpu detection here at the moment. */
+        fifo_mask = S3C2440_UFSTAT_TXMASK;
+        fifo_max = 63 << S3C2440_UFSTAT_TXSHIFT;
+}
+
+#endif /* __ASM_ARCH_UNCOMPRESS_H */
diff --git a/arch/arm/mach-s5pc100/mach-smdkc100.c b/arch/arm/mach-s5pc100/mach-smdkc100.c
new file mode 100644
index 000000000000..214093cd7632
--- /dev/null
+++ b/arch/arm/mach-s5pc100/mach-smdkc100.c
@@ -0,0 +1,103 @@
+/* linux/arch/arm/mach-s5pc100/mach-smdkc100.c
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ * Author: Byungho Min <bhmin@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/i2c.h>
+#include <linux/fb.h>
+#include <linux/delay.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/map.h>
+
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include <plat/regs-serial.h>
+
+#include <plat/clock.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+#include <plat/s5pc100.h>
+
+#define UCON (S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK)
+#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB)
+#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
+
+static struct s3c2410_uartcfg smdkc100_uartcfgs[] __initdata = {
+        [0] = {
+                .hwport      = 0,
+                .flags       = 0,
+                .ucon        = 0x3c5,
+                .ulcon       = 0x03,
+                .ufcon       = 0x51,
+        },
+        [1] = {
+                .hwport      = 1,
+                .flags       = 0,
+                .ucon        = 0x3c5,
+                .ulcon       = 0x03,
+                .ufcon       = 0x51,
+        },
+        [2] = {
+                .hwport      = 2,
+                .flags       = 0,
+                .ucon        = 0x3c5,
+                .ulcon       = 0x03,
+                .ufcon       = 0x51,
+        },
+        [3] = {
+                .hwport      = 3,
+                .flags       = 0,
+                .ucon        = 0x3c5,
+                .ulcon       = 0x03,
+                .ufcon       = 0x51,
+        },
+};
+
+static struct map_desc smdkc100_iodesc[] = {};
+
+static struct platform_device *smdkc100_devices[] __initdata = {
+};
+
+static void __init smdkc100_map_io(void)
+{
+        s5pc1xx_init_io(smdkc100_iodesc, ARRAY_SIZE(smdkc100_iodesc));
+        s3c24xx_init_clocks(12000000);
+        s3c24xx_init_uarts(smdkc100_uartcfgs, ARRAY_SIZE(smdkc100_uartcfgs));
+}
+
+static void __init smdkc100_machine_init(void)
+{
+        platform_add_devices(smdkc100_devices, ARRAY_SIZE(smdkc100_devices));
+}
+
+MACHINE_START(SMDKC100, "SMDKC100")
+        /* Maintainer: Byungho Min <bhmin@samsung.com> */
+        .phys_io        = S5PC1XX_PA_UART & 0xfff00000,
+        .io_pg_offst    = (((u32)S5PC1XX_VA_UART) >> 18) & 0xfffc,
+        .boot_params    = S5PC100_PA_SDRAM + 0x100,
+
+        .init_irq       = s5pc100_init_irq,
+        .map_io         = smdkc100_map_io,
+        .init_machine   = smdkc100_machine_init,
+        .timer          = &s3c24xx_timer,
+MACHINE_END
diff --git a/arch/arm/plat-s3c/Kconfig b/arch/arm/plat-s3c/Kconfig
index 935c7558469b..8931c5f0e46b 100644
--- a/arch/arm/plat-s3c/Kconfig
+++ b/arch/arm/plat-s3c/Kconfig
@@ -198,4 +198,9 @@ config S3C_DEV_USB_HSOTG
         help
           Compile in platform device definition for USB high-speed OtG
 
+config S3C_DEV_NAND
+        bool
+        help
+          Compile in platform device definition for NAND controller
+
 endif
diff --git a/arch/arm/plat-s3c/Makefile b/arch/arm/plat-s3c/Makefile
index 0761766b1833..3c09109e9e84 100644
--- a/arch/arm/plat-s3c/Makefile
+++ b/arch/arm/plat-s3c/Makefile
@@ -28,13 +28,17 @@ obj-$(CONFIG_PM)		+= pm.o
 obj-$(CONFIG_PM)                += pm-gpio.o
 obj-$(CONFIG_S3C2410_PM_CHECK)  += pm-check.o
 
+# PWM support
+
+obj-$(CONFIG_HAVE_PWM)          += pwm.o
+
 # devices
 
 obj-$(CONFIG_S3C_DEV_HSMMC)     += dev-hsmmc.o
 obj-$(CONFIG_S3C_DEV_HSMMC1)    += dev-hsmmc1.o
 obj-y                           += dev-i2c0.o
 obj-$(CONFIG_S3C_DEV_I2C1)      += dev-i2c1.o
-obj-$(CONFIG_SND_S3C64XX_SOC_I2S)       += dev-audio.o
 obj-$(CONFIG_S3C_DEV_FB)        += dev-fb.o
 obj-$(CONFIG_S3C_DEV_USB_HOST)  += dev-usb.o
 obj-$(CONFIG_S3C_DEV_USB_HSOTG) += dev-usb-hsotg.o
+obj-$(CONFIG_S3C_DEV_NAND)      += dev-nand.o
diff --git a/arch/arm/plat-s3c/dev-nand.c b/arch/arm/plat-s3c/dev-nand.c
new file mode 100644
index 000000000000..4e5323732434
--- /dev/null
+++ b/arch/arm/plat-s3c/dev-nand.c
@@ -0,0 +1,30 @@
+/*
+ * S3C series device definition for nand device
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+
+#include <mach/map.h>
+#include <plat/devs.h>
+
+static struct resource s3c_nand_resource[] = {
+        [0] = {
+                .start = S3C_PA_NAND,
+                .end   = S3C_PA_NAND + SZ_1M,
+                .flags = IORESOURCE_MEM,
+        }
+};
+
+struct platform_device s3c_device_nand = {
+        .name             = "s3c2410-nand",
+        .id               = -1,
+        .num_resources    = ARRAY_SIZE(s3c_nand_resource),
+        .resource         = s3c_nand_resource,
+};
+
+EXPORT_SYMBOL(s3c_device_nand);
diff --git a/arch/arm/plat-s3c/include/plat/adc.h b/arch/arm/plat-s3c/include/plat/adc.h
index d847bd476b6c..5f3b1cd53b90 100644
--- a/arch/arm/plat-s3c/include/plat/adc.h
+++ b/arch/arm/plat-s3c/include/plat/adc.h
@@ -19,10 +19,14 @@ struct s3c_adc_client;
 extern int s3c_adc_start(struct s3c_adc_client *client,
                          unsigned int channel, unsigned int nr_samples);
 
+extern int s3c_adc_read(struct s3c_adc_client *client, unsigned int ch);
+
 extern struct s3c_adc_client *
         s3c_adc_register(struct platform_device *pdev,
-                         void (*select)(unsigned selected),
-                         void (*conv)(unsigned d0, unsigned d1,
+                         void (*select)(struct s3c_adc_client *client,
+                                        unsigned selected),
+                         void (*conv)(struct s3c_adc_client *client,
+                                      unsigned d0, unsigned d1,
                                       unsigned *samples_left),
                          unsigned int is_ts);
 
diff --git a/arch/arm/plat-s3c/include/plat/cpu-freq.h b/arch/arm/plat-s3c/include/plat/cpu-freq.h
index c86a13307e90..7b982b7f28cd 100644
--- a/arch/arm/plat-s3c/include/plat/cpu-freq.h
+++ b/arch/arm/plat-s3c/include/plat/cpu-freq.h
@@ -17,6 +17,21 @@ struct s3c_cpufreq_info;
 struct s3c_cpufreq_board;
 struct s3c_iotimings;
 
+/**
+ * struct s3c_freq - frequency information (mainly for core drivers)
+ * @fclk: The FCLK frequency in Hz.
+ * @armclk: The ARMCLK frequency in Hz.
+ * @hclk_tns: HCLK cycle time in 10ths of nano-seconds.
+ * @hclk: The HCLK frequency in Hz.
+ * @pclk: The PCLK frequency in Hz.
+ *
+ * This contains the frequency information about the current configuration
+ * mainly for the core drivers to ensure we do not end up passing about
+ * a large number of parameters.
+ *
+ * The @hclk_tns field is a useful cache for the parts of the drivers that
+ * need to calculate IO timings and suchlike.
+ */
 struct s3c_freq {
         unsigned long   fclk;
         unsigned long   armclk;
@@ -25,48 +40,84 @@ struct s3c_freq {
         unsigned long   pclk;
 };
 
-/* wrapper 'struct cpufreq_freqs' so that any drivers receiving the
+/**
+ * struct s3c_cpufreq_freqs - s3c cpufreq notification information.
+ * @freqs: The cpufreq setting information.
+ * @old: The old clock settings.
+ * @new: The new clock settings.
+ * @pll_changing: Set if the PLL is changing.
+ *
+ * Wrapper 'struct cpufreq_freqs' so that any drivers receiving the
  * notification can use this information that is not provided by just
  * having the core frequency alone.
+ *
+ * The pll_changing flag is used to indicate if the PLL itself is
+ * being set during this change. This is important as the clocks
+ * will temporarily be set to the XTAL clock during this time, so
+ * drivers may want to close down their output during this time.
+ *
+ * Note, this is not being used by any current drivers and therefore
+ * may be removed in the future.
  */
-
 struct s3c_cpufreq_freqs {
         struct cpufreq_freqs    freqs;
         struct s3c_freq         old;
         struct s3c_freq         new;
+
+        unsigned int            pll_changing:1;
 };
 
 #define to_s3c_cpufreq(_cf) container_of(_cf, struct s3c_cpufreq_freqs, freqs)
 
+/**
+ * struct s3c_clkdivs - clock divisor information
+ * @p_divisor: Divisor from FCLK to PCLK.
+ * @h_divisor: Divisor from FCLK to HCLK.
+ * @arm_divisor: Divisor from FCLK to ARMCLK (not all CPUs).
+ * @dvs: Non-zero if using DVS mode for ARMCLK.
+ *
+ * Divisor settings for the core clocks.
+ */
 struct s3c_clkdivs {
-        int             p_divisor;      /* fclk / pclk */
-        int             h_divisor;      /* fclk / hclk */
-        int             arm_divisor;    /* not all cpus have this. */
-        unsigned char   dvs;            /* using dvs mode to arm. */
+        int             p_divisor;
+        int             h_divisor;
+        int             arm_divisor;
+        unsigned char   dvs;
 };
 
 #define PLLVAL(_m, _p, _s) (((_m) << 12) | ((_p) << 4) | (_s))
 
+/**
+ * struct s3c_pllval - PLL value entry.
+ * @freq: The frequency for this entry in Hz.
+ * @pll_reg: The PLL register setting for this PLL value.
+ */
 struct s3c_pllval {
         unsigned long           freq;
         unsigned long           pll_reg;
 };
 
-struct s3c_cpufreq_config {
-        struct s3c_freq         freq;
-        struct s3c_pllval       pll;
-        struct s3c_clkdivs      divs;
-        struct s3c_cpufreq_info *info;  /* for core, not drivers */
-        struct s3c_cpufreq_board *board;
-};
-
-/* s3c_cpufreq_board
+/**
+ * struct s3c_cpufreq_board - per-board cpu frequency informatin
+ * @refresh: The SDRAM refresh period in nanoseconds.
+ * @auto_io: Set if the IO timing settings should be generated from the
+ *      initialisation time hardware registers.
+ * @need_io: Set if the board has external IO on any of the chipselect
+ *      lines that will require the hardware timing registers to be
+ *      updated on a clock change.
+ * @max: The maxium frequency limits for the system. Any field that
+ *      is left at zero will use the CPU's settings.
+ *
+ * This contains the board specific settings that affect how the CPU
+ * drivers chose settings. These include the memory refresh and IO
+ * timing information.
  *
- * per-board configuraton information, such as memory refresh and
- * how to initialise IO timings.
+ * Registration depends on the driver being used, the ARMCLK only
+ * implementation does not currently need this but the older style
+ * driver requires this to be available.
  */
 struct s3c_cpufreq_board {
-        unsigned int    refresh;        /* refresh period in ns */
+        unsigned int    refresh;
         unsigned int    auto_io:1;      /* automatically init io timings. */
         unsigned int    need_io:1;      /* set if needs io timing support. */
 
diff --git a/arch/arm/plat-s3c/include/plat/cpu.h b/arch/arm/plat-s3c/include/plat/cpu.h
index be541cbba070..fbc3d498e02e 100644
--- a/arch/arm/plat-s3c/include/plat/cpu.h
+++ b/arch/arm/plat-s3c/include/plat/cpu.h
@@ -65,6 +65,7 @@ extern struct sys_timer s3c24xx_timer;
 /* system device classes */
 
 extern struct sysdev_class s3c2410_sysclass;
+extern struct sysdev_class s3c2410a_sysclass;
 extern struct sysdev_class s3c2412_sysclass;
 extern struct sysdev_class s3c2440_sysclass;
 extern struct sysdev_class s3c2442_sysclass;
diff --git a/arch/arm/plat-s3c/include/plat/devs.h b/arch/arm/plat-s3c/include/plat/devs.h
index 2e170827e0b0..0f540ea1e999 100644
--- a/arch/arm/plat-s3c/include/plat/devs.h
+++ b/arch/arm/plat-s3c/include/plat/devs.h
@@ -46,6 +46,8 @@ extern struct platform_device s3c_device_hsmmc2;
 extern struct platform_device s3c_device_spi0;
 extern struct platform_device s3c_device_spi1;
 
+extern struct platform_device s3c_device_hwmon;
+
 extern struct platform_device s3c_device_nand;
 
 extern struct platform_device s3c_device_usbgadget;
@@ -56,5 +58,6 @@ extern struct platform_device s3c_device_usb_hsotg;
 #ifdef CONFIG_CPU_S3C2440
 
 extern struct platform_device s3c_device_camif;
+extern struct platform_device s3c_device_ac97;
 
 #endif
diff --git a/arch/arm/plat-s3c/include/plat/hwmon.h b/arch/arm/plat-s3c/include/plat/hwmon.h
new file mode 100644
index 000000000000..1ba88ea0aa31
--- /dev/null
+++ b/arch/arm/plat-s3c/include/plat/hwmon.h
@@ -0,0 +1,41 @@
+/* linux/arch/arm/plat-s3c/include/plat/hwmon.h
+ *
+ * Copyright 2005 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * S3C - HWMon interface for ADC
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_ADC_HWMON_H
+#define __ASM_ARCH_ADC_HWMON_H __FILE__
+
+/**
+ * s3c_hwmon_chcfg - channel configuration
+ * @name: The name to give this channel.
+ * @mult: Multiply the ADC value read by this.
+ * @div: Divide the value from the ADC by this.
+ *
+ * The value read from the ADC is converted to a value that
+ * hwmon expects (mV) by result = (value_read * @mult) / @div.
+ */
+struct s3c_hwmon_chcfg {
+        const char      *name;
+        unsigned int    mult;
+        unsigned int    div;
+};
+
+/**
+ * s3c_hwmon_pdata - HWMON platform data
+ * @in: One configuration for each possible channel used.
+ */
+struct s3c_hwmon_pdata {
+        struct s3c_hwmon_chcfg  *in[8];
+};
+
+#endif /* __ASM_ARCH_ADC_HWMON_H */
+
diff --git a/arch/arm/plat-s3c/include/plat/map-base.h b/arch/arm/plat-s3c/include/plat/map-base.h
index b84289d32a54..250be311c85b 100644
--- a/arch/arm/plat-s3c/include/plat/map-base.h
+++ b/arch/arm/plat-s3c/include/plat/map-base.h
@@ -32,9 +32,15 @@
 
 #define S3C_VA_IRQ      S3C_ADDR(0x00000000)    /* irq controller(s) */
 #define S3C_VA_SYS      S3C_ADDR(0x00100000)    /* system control */
-#define S3C_VA_MEM      S3C_ADDR(0x00200000)    /* system control */
+#define S3C_VA_MEM      S3C_ADDR(0x00200000)    /* memory control */
 #define S3C_VA_TIMER    S3C_ADDR(0x00300000)    /* timer block */
 #define S3C_VA_WATCHDOG S3C_ADDR(0x00400000)    /* watchdog */
 #define S3C_VA_UART     S3C_ADDR(0x01000000)    /* UART */
 
+/* This is used for the CPU specific mappings that may be needed, so that
+ * they do not need to directly used S3C_ADDR() and thus make it easier to
+ * modify the space for mapping.
+ */
+#define S3C_ADDR_CPU(x) S3C_ADDR(0x00500000 + (x))
+
 #endif /* __ASM_PLAT_MAP_H */
diff --git a/arch/arm/plat-s3c24xx/pwm.c b/arch/arm/plat-s3c/pwm.c
index 0120b760315b..f3d37ac5595b 100644
--- a/arch/arm/plat-s3c24xx/pwm.c
+++ b/arch/arm/plat-s3c/pwm.c
@@ -1,10 +1,10 @@
-/* arch/arm/plat-s3c24xx/pwm.c
+/* arch/arm/plat-s3c/pwm.c
  *
  * Copyright (c) 2007 Ben Dooks
  * Copyright (c) 2008 Simtec Electronics
  *      Ben Dooks <ben@simtec.co.uk>, <ben-linux@fluff.org>
  *
- * S3C24XX PWM device core
+ * S3C series PWM device core
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -20,6 +20,7 @@
 #include <linux/pwm.h>
 
 #include <mach/irqs.h>
+#include <mach/map.h>
 
 #include <plat/devs.h>
 #include <plat/regs-timer.h>
diff --git a/arch/arm/plat-s3c24xx/Kconfig b/arch/arm/plat-s3c24xx/Kconfig
index 5b0bc914f58e..9c7aca489643 100644
--- a/arch/arm/plat-s3c24xx/Kconfig
+++ b/arch/arm/plat-s3c24xx/Kconfig
@@ -10,6 +10,7 @@ config PLAT_S3C24XX
         default y
         select NO_IOPORT
         select ARCH_REQUIRE_GPIOLIB
+        select S3C_DEVICE_NAND
         help
           Base platform code for any Samsung S3C24XX device
 
@@ -34,6 +35,40 @@ config CPU_S3C244X
         help
           Support for S3C2440 and S3C2442 Samsung Mobile CPU based systems.
 
+config S3C2440_CPUFREQ
+        bool "S3C2440/S3C2442 CPU Frequency scaling support"
+        depends on CPU_FREQ_S3C24XX && (CPU_S3C2440 || CPU_S3C2442)
+        select S3C2410_CPUFREQ_UTILS
+        default y
+        help
+          CPU Frequency scaling support for S3C2440 and S3C2442 SoC CPUs.
+
+config S3C2440_XTAL_12000000
+        bool
+        help
+          Indicate that the build needs to support 12MHz system
+          crystal.
+
+config S3C2440_XTAL_16934400
+        bool
+        help
+          Indicate that the build needs to support 16.9344MHz system
+          crystal.
+
+config S3C2440_PLL_12000000
+        bool
+        depends on S3C2440_CPUFREQ && S3C2440_XTAL_12000000
+        default y if CPU_FREQ_S3C24XX_PLL
+        help
+          PLL tables for S3C2440 or S3C2442 CPUs with 12MHz crystals.
+
+config S3C2440_PLL_16934400
+        bool
+        depends on S3C2440_CPUFREQ && S3C2440_XTAL_16934400
+        default y if CPU_FREQ_S3C24XX_PLL
+        help
+          PLL tables for S3C2440 or S3C2442 CPUs with 16.934MHz crystals.
+
 config S3C24XX_PWM
         bool "PWM device support"
         select HAVE_PWM
@@ -105,8 +140,39 @@ config S3C24XX_SPI_BUS1_GPG5_GPG6_GPG7
           SPI GPIO configuration code for BUS 1 when connected to
           GPG5, GPG6 and GPG7.
 
+config S3C24XX_SPI_BUS1_GPD8_GPD9_GPD10
+        bool
+        help
+          SPI GPIO configuration code for BUS 1 when connected to
+          GPD8, GPD9 and GPD10.
+
 # common code for s3c24xx based machines, such as the SMDKs.
 
+# cpu frequency items common between s3c2410 and s3c2440/s3c2442
+
+config S3C2410_IOTIMING
+        bool
+        depends on CPU_FREQ_S3C24XX
+        help
+          Internal node to select io timing code that is common to the s3c2410
+          and s3c2440/s3c2442 cpu frequency support.
+
+config S3C2410_CPUFREQ_UTILS
+        bool
+        depends on CPU_FREQ_S3C24XX
+        help
+          Internal node to select timing code that is common to the s3c2410
+          and s3c2440/s3c244 cpu frequency support.
+
+# cpu frequency support common to s3c2412, s3c2413 and s3c2442
+
+config S3C2412_IOTIMING
+        bool
+        depends on CPU_FREQ_S3C24XX && (CPU_S3C2412 || CPU_S3C2443)
+        help
+          Intel node to select io timing code that is common to the s3c2412
+          and the s3c2443.
+
 config MACH_SMDK
         bool
         help
diff --git a/arch/arm/plat-s3c24xx/Makefile b/arch/arm/plat-s3c24xx/Makefile
index 579a165c2827..7780d2dd833a 100644
--- a/arch/arm/plat-s3c24xx/Makefile
+++ b/arch/arm/plat-s3c24xx/Makefile
@@ -20,19 +20,28 @@ obj-y				+= gpiolib.o
 obj-y                           += clock.o
 obj-$(CONFIG_S3C24XX_DCLK)      += clock-dclk.o
 
+obj-$(CONFIG_CPU_FREQ_S3C24XX)  += cpu-freq.o
+obj-$(CONFIG_CPU_FREQ_S3C24XX_DEBUGFS) += cpu-freq-debugfs.o
+
 # Architecture dependant builds
 
 obj-$(CONFIG_CPU_S3C244X)       += s3c244x.o
 obj-$(CONFIG_CPU_S3C244X)       += s3c244x-irq.o
 obj-$(CONFIG_CPU_S3C244X)       += s3c244x-clock.o
+obj-$(CONFIG_S3C2440_CPUFREQ)   += s3c2440-cpufreq.o
+obj-$(CONFIG_S3C2440_PLL_12000000) += s3c2440-pll-12000000.o
+obj-$(CONFIG_S3C2440_PLL_16934400) += s3c2440-pll-16934400.o
+
 obj-$(CONFIG_PM_SIMTEC)         += pm-simtec.o
 obj-$(CONFIG_PM)                += pm.o
 obj-$(CONFIG_PM)                += irq-pm.o
 obj-$(CONFIG_PM)                += sleep.o
-obj-$(CONFIG_S3C24XX_PWM)       += pwm.o
 obj-$(CONFIG_S3C2410_CLOCK)     += s3c2410-clock.o
 obj-$(CONFIG_S3C2410_DMA)       += dma.o
 obj-$(CONFIG_S3C24XX_ADC)       += adc.o
+obj-$(CONFIG_S3C2410_IOTIMING)  += s3c2410-iotiming.o
+obj-$(CONFIG_S3C2412_IOTIMING)  += s3c2412-iotiming.o
+obj-$(CONFIG_S3C2410_CPUFREQ_UTILS) += s3c2410-cpufreq-utils.o
 
 # device specific setup and/or initialisation
 obj-$(CONFIG_ARCH_S3C2410)      += setup-i2c.o
@@ -41,6 +50,7 @@ obj-$(CONFIG_ARCH_S3C2410)	+= setup-i2c.o
 
 obj-$(CONFIG_S3C24XX_SPI_BUS0_GPE11_GPE12_GPE13) += spi-bus0-gpe11_12_13.o
 obj-$(CONFIG_S3C24XX_SPI_BUS1_GPG5_GPG6_GPG7)    += spi-bus1-gpg5_6_7.o
+obj-$(CONFIG_S3C24XX_SPI_BUS1_GPD8_GPD9_GPD10)   += spi-bus1-gpd8_9_10.o
 
 # machine common support
 
diff --git a/arch/arm/plat-s3c24xx/adc.c b/arch/arm/plat-s3c24xx/adc.c
index ee1baf11ad9e..11117a7ba911 100644
--- a/arch/arm/plat-s3c24xx/adc.c
+++ b/arch/arm/plat-s3c24xx/adc.c
@@ -39,13 +39,16 @@
 struct s3c_adc_client {
         struct platform_device  *pdev;
         struct list_head         pend;
+        wait_queue_head_t       *wait;
 
         unsigned int             nr_samples;
+        int                      result;
         unsigned char            is_ts;
         unsigned char            channel;
 
-        void    (*select_cb)(unsigned selected);
-        void    (*convert_cb)(unsigned val1, unsigned val2,
+        void    (*select_cb)(struct s3c_adc_client *c, unsigned selected);
+        void    (*convert_cb)(struct s3c_adc_client *c,
+                              unsigned val1, unsigned val2,
                               unsigned *samples_left);
 };
 
@@ -81,7 +84,7 @@ static inline void s3c_adc_select(struct adc_device *adc,
 {
         unsigned con = readl(adc->regs + S3C2410_ADCCON);
 
-        client->select_cb(1);
+        client->select_cb(client, 1);
 
         con &= ~S3C2410_ADCCON_MUXMASK;
         con &= ~S3C2410_ADCCON_STDBM;
@@ -153,25 +156,61 @@ int s3c_adc_start(struct s3c_adc_client *client,
 }
 EXPORT_SYMBOL_GPL(s3c_adc_start);
 
-static void s3c_adc_default_select(unsigned select)
+static void s3c_convert_done(struct s3c_adc_client *client,
+                             unsigned v, unsigned u, unsigned *left)
+{
+        client->result = v;
+        wake_up(client->wait);
+}
+
+int s3c_adc_read(struct s3c_adc_client *client, unsigned int ch)
+{
+        DECLARE_WAIT_QUEUE_HEAD_ONSTACK(wake);
+        int ret;
+
+        client->convert_cb = s3c_convert_done;
+        client->wait = &wake;
+        client->result = -1;
+
+        ret = s3c_adc_start(client, ch, 1);
+        if (ret < 0)
+                goto err;
+
+        ret = wait_event_timeout(wake, client->result >= 0, HZ / 2);
+        if (client->result < 0) {
+                ret = -ETIMEDOUT;
+                goto err;
+        }
+
+        client->convert_cb = NULL;
+        return client->result;
+
+err:
+        return ret;
+}
+EXPORT_SYMBOL_GPL(s3c_adc_convert);
+
+static void s3c_adc_default_select(struct s3c_adc_client *client,
+                                   unsigned select)
 {
 }
 
 struct s3c_adc_client *s3c_adc_register(struct platform_device *pdev,
-                                        void (*select)(unsigned int selected),
-                                        void (*conv)(unsigned d0, unsigned d1,
+                                        void (*select)(struct s3c_adc_client *client,
+                                                       unsigned int selected),
+                                        void (*conv)(struct s3c_adc_client *client,
+                                                     unsigned d0, unsigned d1,
                                                      unsigned *samples_left),
                                         unsigned int is_ts)
 {
         struct s3c_adc_client *client;
 
         WARN_ON(!pdev);
-        WARN_ON(!conv);
 
         if (!select)
                 select = s3c_adc_default_select;
 
-        if (!conv || !pdev)
+        if (!pdev)
                 return ERR_PTR(-EINVAL);
 
         client = kzalloc(sizeof(struct s3c_adc_client), GFP_KERNEL);
@@ -230,16 +269,19 @@ static irqreturn_t s3c_adc_irq(int irq, void *pw)
         adc_dbg(adc, "read %d: 0x%04x, 0x%04x\n", client->nr_samples, data0, data1);
 
         client->nr_samples--;
-        (client->convert_cb)(data0 & 0x3ff, data1 & 0x3ff, &client->nr_samples);
+
+        if (client->convert_cb)
+                (client->convert_cb)(client, data0 & 0x3ff, data1 & 0x3ff,
+                                     &client->nr_samples);
 
         if (client->nr_samples > 0) {
                 /* fire another conversion for this */
 
-                client->select_cb(1);
+                client->select_cb(client, 1);
                 s3c_adc_convert(adc);
         } else {
                 local_irq_save(flags);
-                (client->select_cb)(0);
+                (client->select_cb)(client, 0);
                 adc->cur = NULL;
 
                 s3c_adc_try(adc);
diff --git a/arch/arm/plat-s3c24xx/cpu-freq-debugfs.c b/arch/arm/plat-s3c24xx/cpu-freq-debugfs.c
new file mode 100644
index 000000000000..a9276667c2fb
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/cpu-freq-debugfs.c
@@ -0,0 +1,199 @@
+/* linux/arch/arm/plat-s3c24xx/cpu-freq-debugfs.c
+ *
+ * Copyright (c) 2009 Simtec Electronics
+ *      http://armlinux.simtec.co.uk/
+ *      Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C24XX CPU Frequency scaling - debugfs status support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/cpufreq.h>
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+#include <linux/err.h>
+
+#include <plat/cpu-freq-core.h>
+
+static struct dentry *dbgfs_root;
+static struct dentry *dbgfs_file_io;
+static struct dentry *dbgfs_file_info;
+static struct dentry *dbgfs_file_board;
+
+#define print_ns(x) ((x) / 10), ((x) % 10)
+
+static void show_max(struct seq_file *seq, struct s3c_freq *f)
+{
+        seq_printf(seq, "MAX: F=%lu, H=%lu, P=%lu, A=%lu\n",
+                   f->fclk, f->hclk, f->pclk, f->armclk);
+}
+
+static int board_show(struct seq_file *seq, void *p)
+{
+        struct s3c_cpufreq_config *cfg;
+        struct s3c_cpufreq_board *brd;
+
+        cfg = s3c_cpufreq_getconfig();
+        if (!cfg) {
+                seq_printf(seq, "no configuration registered\n");
+                return 0;
+        }
+
+        brd = cfg->board;
+        if (!brd) {
+                seq_printf(seq, "no board definition set?\n");
+                return 0;
+        }
+
+        seq_printf(seq, "SDRAM refresh %u ns\n", brd->refresh);
+        seq_printf(seq, "auto_io=%u\n", brd->auto_io);
+        seq_printf(seq, "need_io=%u\n", brd->need_io);
+
+        show_max(seq, &brd->max);
+
+
+        return 0;
+}
+
+static int fops_board_open(struct inode *inode, struct file *file)
+{
+        return single_open(file, board_show, NULL);
+}
+
+static const struct file_operations fops_board = {
+        .open           = fops_board_open,
+        .read           = seq_read,
+        .llseek         = seq_lseek,
+        .release        = single_release,
+        .owner          = THIS_MODULE,
+};
+
+static int info_show(struct seq_file *seq, void *p)
+{
+        struct s3c_cpufreq_config *cfg;
+
+        cfg = s3c_cpufreq_getconfig();
+        if (!cfg) {
+                seq_printf(seq, "no configuration registered\n");
+                return 0;
+        }
+
+        seq_printf(seq, "  FCLK %ld Hz\n", cfg->freq.fclk);
+        seq_printf(seq, "  HCLK %ld Hz (%lu.%lu ns)\n",
+                   cfg->freq.hclk, print_ns(cfg->freq.hclk_tns));
+        seq_printf(seq, "  PCLK %ld Hz\n", cfg->freq.hclk);
+        seq_printf(seq, "ARMCLK %ld Hz\n", cfg->freq.armclk);
+        seq_printf(seq, "\n");
+
+        show_max(seq, &cfg->max);
+
+        seq_printf(seq, "Divisors: P=%d, H=%d, A=%d, dvs=%s\n",
+                   cfg->divs.h_divisor, cfg->divs.p_divisor,
+                   cfg->divs.arm_divisor, cfg->divs.dvs ? "on" : "off");
+        seq_printf(seq, "\n");
+
+        seq_printf(seq, "lock_pll=%u\n", cfg->lock_pll);
+
+        return 0;
+}
+
+static int fops_info_open(struct inode *inode, struct file *file)
+{
+        return single_open(file, info_show, NULL);
+}
+
+static const struct file_operations fops_info = {
+        .open           = fops_info_open,
+        .read           = seq_read,
+        .llseek         = seq_lseek,
+        .release        = single_release,
+        .owner          = THIS_MODULE,
+};
+
+static int io_show(struct seq_file *seq, void *p)
+{
+        void (*show_bank)(struct seq_file *, struct s3c_cpufreq_config *, union s3c_iobank *);
+        struct s3c_cpufreq_config *cfg;
+        struct s3c_iotimings *iot;
+        union s3c_iobank *iob;
+        int bank;
+
+        cfg = s3c_cpufreq_getconfig();
+        if (!cfg) {
+                seq_printf(seq, "no configuration registered\n");
+                return 0;
+        }
+
+        show_bank = cfg->info->debug_io_show;
+        if (!show_bank) {
+                seq_printf(seq, "no code to show bank timing\n");
+                return 0;
+        }
+
+        iot = s3c_cpufreq_getiotimings();
+        if (!iot) {
+                seq_printf(seq, "no io timings registered\n");
+                return 0;
+        }
+
+        seq_printf(seq, "hclk period is %lu.%lu ns\n", print_ns(cfg->freq.hclk_tns));
+
+        for (bank = 0; bank < MAX_BANKS; bank++) {
+                iob = &iot->bank[bank];
+
+                seq_printf(seq, "bank %d: ", bank);
+
+                if (!iob->io_2410) {
+                        seq_printf(seq, "nothing set\n");
+                        continue;
+                }
+
+                show_bank(seq, cfg, iob);
+        }
+
+        return 0;
+}
+
+static int fops_io_open(struct inode *inode, struct file *file)
+{
+        return single_open(file, io_show, NULL);
+}
+
+static const struct file_operations fops_io = {
+        .open           = fops_io_open,
+        .read           = seq_read,
+        .llseek         = seq_lseek,
+        .release        = single_release,
+        .owner          = THIS_MODULE,
+};
+
+
+static int __init s3c_freq_debugfs_init(void)
+{
+        dbgfs_root = debugfs_create_dir("s3c-cpufreq", NULL);
+        if (IS_ERR(dbgfs_root)) {
+                printk(KERN_ERR "%s: error creating debugfs root\n", __func__);
+                return PTR_ERR(dbgfs_root);
+        }
+
+        dbgfs_file_io = debugfs_create_file("io-timing", S_IRUGO, dbgfs_root,
+                                            NULL, &fops_io);
+
+        dbgfs_file_info = debugfs_create_file("info", S_IRUGO, dbgfs_root,
+                                              NULL, &fops_info);
+
+        dbgfs_file_board = debugfs_create_file("board", S_IRUGO, dbgfs_root,
+                                               NULL, &fops_board);
+
+        return 0;
+}
+
+late_initcall(s3c_freq_debugfs_init);
+
diff --git a/arch/arm/plat-s3c24xx/cpu-freq.c b/arch/arm/plat-s3c24xx/cpu-freq.c
new file mode 100644
index 000000000000..4f1b789a1173
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/cpu-freq.c
@@ -0,0 +1,716 @@
+/* linux/arch/arm/plat-s3c24xx/cpu-freq.c
+ *
+ * Copyright (c) 2006,2007,2008 Simtec Electronics
+ *      http://armlinux.simtec.co.uk/
+ *      Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C24XX CPU Frequency scaling
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/cpufreq.h>
+#include <linux/cpu.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/sysdev.h>
+#include <linux/kobject.h>
+#include <linux/sysfs.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <plat/cpu.h>
+#include <plat/clock.h>
+#include <plat/cpu-freq-core.h>
+
+#include <mach/regs-clock.h>
+
+/* note, cpufreq support deals in kHz, no Hz */
+
+static struct cpufreq_driver s3c24xx_driver;
+static struct s3c_cpufreq_config cpu_cur;
+static struct s3c_iotimings s3c24xx_iotiming;
+static struct cpufreq_frequency_table *pll_reg;
+static unsigned int last_target = ~0;
+static unsigned int ftab_size;
+static struct cpufreq_frequency_table *ftab;
+
+static struct clk *_clk_mpll;
+static struct clk *_clk_xtal;
+static struct clk *clk_fclk;
+static struct clk *clk_hclk;
+static struct clk *clk_pclk;
+static struct clk *clk_arm;
+
+#ifdef CONFIG_CPU_FREQ_S3C24XX_DEBUGFS
+struct s3c_cpufreq_config *s3c_cpufreq_getconfig(void)
+{
+        return &cpu_cur;
+}
+
+struct s3c_iotimings *s3c_cpufreq_getiotimings(void)
+{
+        return &s3c24xx_iotiming;
+}
+#endif /* CONFIG_CPU_FREQ_S3C24XX_DEBUGFS */
+
+static void s3c_cpufreq_getcur(struct s3c_cpufreq_config *cfg)
+{
+        unsigned long fclk, pclk, hclk, armclk;
+
+        cfg->freq.fclk = fclk = clk_get_rate(clk_fclk);
+        cfg->freq.hclk = hclk = clk_get_rate(clk_hclk);
+        cfg->freq.pclk = pclk = clk_get_rate(clk_pclk);
+        cfg->freq.armclk = armclk = clk_get_rate(clk_arm);
+
+        cfg->pll.index = __raw_readl(S3C2410_MPLLCON);
+        cfg->pll.frequency = fclk;
+
+        cfg->freq.hclk_tns = 1000000000 / (cfg->freq.hclk / 10);
+
+        cfg->divs.h_divisor = fclk / hclk;
+        cfg->divs.p_divisor = fclk / pclk;
+}
+
+static inline void s3c_cpufreq_calc(struct s3c_cpufreq_config *cfg)
+{
+        unsigned long pll = cfg->pll.frequency;
+
+        cfg->freq.fclk = pll;
+        cfg->freq.hclk = pll / cfg->divs.h_divisor;
+        cfg->freq.pclk = pll / cfg->divs.p_divisor;
+
+        /* convert hclk into 10ths of nanoseconds for io calcs */
+        cfg->freq.hclk_tns = 1000000000 / (cfg->freq.hclk / 10);
+}
+
+static inline int closer(unsigned int target, unsigned int n, unsigned int c)
+{
+        int diff_cur = abs(target - c);
+        int diff_new = abs(target - n);
+
+        return (diff_new < diff_cur);
+}
+
+static void s3c_cpufreq_show(const char *pfx,
+                                 struct s3c_cpufreq_config *cfg)
+{
+        s3c_freq_dbg("%s: Fvco=%u, F=%lu, A=%lu, H=%lu (%u), P=%lu (%u)\n",
+                     pfx, cfg->pll.frequency, cfg->freq.fclk, cfg->freq.armclk,
+                     cfg->freq.hclk, cfg->divs.h_divisor,
+                     cfg->freq.pclk, cfg->divs.p_divisor);
+}
+
+/* functions to wrapper the driver info calls to do the cpu specific work */
+
+static void s3c_cpufreq_setio(struct s3c_cpufreq_config *cfg)
+{
+        if (cfg->info->set_iotiming)
+                (cfg->info->set_iotiming)(cfg, &s3c24xx_iotiming);
+}
+
+static int s3c_cpufreq_calcio(struct s3c_cpufreq_config *cfg)
+{
+        if (cfg->info->calc_iotiming)
+                return (cfg->info->calc_iotiming)(cfg, &s3c24xx_iotiming);
+
+        return 0;
+}
+
+static void s3c_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg)
+{
+        (cfg->info->set_refresh)(cfg);
+}
+
+static void s3c_cpufreq_setdivs(struct s3c_cpufreq_config *cfg)
+{
+        (cfg->info->set_divs)(cfg);
+}
+
+static int s3c_cpufreq_calcdivs(struct s3c_cpufreq_config *cfg)
+{
+        return (cfg->info->calc_divs)(cfg);
+}
+
+static void s3c_cpufreq_setfvco(struct s3c_cpufreq_config *cfg)
+{
+        (cfg->info->set_fvco)(cfg);
+}
+
+static inline void s3c_cpufreq_resume_clocks(void)
+{
+        cpu_cur.info->resume_clocks();
+}
+
+static inline void s3c_cpufreq_updateclk(struct clk *clk,
+                                         unsigned int freq)
+{
+        clk_set_rate(clk, freq);
+}
+
+static int s3c_cpufreq_settarget(struct cpufreq_policy *policy,
+                                 unsigned int target_freq,
+                                 struct cpufreq_frequency_table *pll)
+{
+        struct s3c_cpufreq_freqs freqs;
+        struct s3c_cpufreq_config cpu_new;
+        unsigned long flags;
+
+        cpu_new = cpu_cur;  /* copy new from current */
+
+        s3c_cpufreq_show("cur", &cpu_cur);
+
+        /* TODO - check for DMA currently outstanding */
+
+        cpu_new.pll = pll ? *pll : cpu_cur.pll;
+
+        if (pll)
+                freqs.pll_changing = 1;
+
+        /* update our frequencies */
+
+        cpu_new.freq.armclk = target_freq;
+        cpu_new.freq.fclk = cpu_new.pll.frequency;
+
+        if (s3c_cpufreq_calcdivs(&cpu_new) < 0) {
+                printk(KERN_ERR "no divisors for %d\n", target_freq);
+                goto err_notpossible;
+        }
+
+        s3c_freq_dbg("%s: got divs\n", __func__);
+
+        s3c_cpufreq_calc(&cpu_new);
+
+        s3c_freq_dbg("%s: calculated frequencies for new\n", __func__);
+
+        if (cpu_new.freq.hclk != cpu_cur.freq.hclk) {
+                if (s3c_cpufreq_calcio(&cpu_new) < 0) {
+                        printk(KERN_ERR "%s: no IO timings\n", __func__);
+                        goto err_notpossible;
+                }
+        }
+
+        s3c_cpufreq_show("new", &cpu_new);
+
+        /* setup our cpufreq parameters */
+
+        freqs.old = cpu_cur.freq;
+        freqs.new = cpu_new.freq;
+
+        freqs.freqs.cpu = 0;
+        freqs.freqs.old = cpu_cur.freq.armclk / 1000;
+        freqs.freqs.new = cpu_new.freq.armclk / 1000;
+
+        /* update f/h/p clock settings before we issue the change
+         * notification, so that drivers do not need to do anything
+         * special if they want to recalculate on CPUFREQ_PRECHANGE. */
+
+        s3c_cpufreq_updateclk(_clk_mpll, cpu_new.pll.frequency);
+        s3c_cpufreq_updateclk(clk_fclk, cpu_new.freq.fclk);
+        s3c_cpufreq_updateclk(clk_hclk, cpu_new.freq.hclk);
+        s3c_cpufreq_updateclk(clk_pclk, cpu_new.freq.pclk);
+
+        /* start the frequency change */
+
+        if (policy)
+                cpufreq_notify_transition(&freqs.freqs, CPUFREQ_PRECHANGE);
+
+        /* If hclk is staying the same, then we do not need to
+         * re-write the IO or the refresh timings whilst we are changing
+         * speed. */
+
+        local_irq_save(flags);
+
+        /* is our memory clock slowing down? */
+        if (cpu_new.freq.hclk < cpu_cur.freq.hclk) {
+                s3c_cpufreq_setrefresh(&cpu_new);
+                s3c_cpufreq_setio(&cpu_new);
+        }
+
+        if (cpu_new.freq.fclk == cpu_cur.freq.fclk) {
+                /* not changing PLL, just set the divisors */
+
+                s3c_cpufreq_setdivs(&cpu_new);
+        } else {
+                if (cpu_new.freq.fclk < cpu_cur.freq.fclk) {
+                        /* slow the cpu down, then set divisors */
+
+                        s3c_cpufreq_setfvco(&cpu_new);
+                        s3c_cpufreq_setdivs(&cpu_new);
+                } else {
+                        /* set the divisors, then speed up */
+
+                        s3c_cpufreq_setdivs(&cpu_new);
+                        s3c_cpufreq_setfvco(&cpu_new);
+                }
+        }
+
+        /* did our memory clock speed up */
+        if (cpu_new.freq.hclk > cpu_cur.freq.hclk) {
+                s3c_cpufreq_setrefresh(&cpu_new);
+                s3c_cpufreq_setio(&cpu_new);
+        }
+
+        /* update our current settings */
+        cpu_cur = cpu_new;
+
+        local_irq_restore(flags);
+
+        /* notify everyone we've done this */
+        if (policy)
+                cpufreq_notify_transition(&freqs.freqs, CPUFREQ_POSTCHANGE);
+
+        s3c_freq_dbg("%s: finished\n", __func__);
+        return 0;
+
+ err_notpossible:
+        printk(KERN_ERR "no compatible settings for %d\n", target_freq);
+        return -EINVAL;
+}
+
+/* s3c_cpufreq_target
+ *
+ * called by the cpufreq core to adjust the frequency that the CPU
+ * is currently running at.
+ */
+
+static int s3c_cpufreq_target(struct cpufreq_policy *policy,
+                              unsigned int target_freq,
+                              unsigned int relation)
+{
+        struct cpufreq_frequency_table *pll;
+        unsigned int index;
+
+        /* avoid repeated calls which cause a needless amout of duplicated
+         * logging output (and CPU time as the calculation process is
+         * done) */
+        if (target_freq == last_target)
+                return 0;
+
+        last_target = target_freq;
+
+        s3c_freq_dbg("%s: policy %p, target %u, relation %u\n",
+                     __func__, policy, target_freq, relation);
+
+        if (ftab) {
+                if (cpufreq_frequency_table_target(policy, ftab,
+                                                   target_freq, relation,
+                                                   &index)) {
+                        s3c_freq_dbg("%s: table failed\n", __func__);
+                        return -EINVAL;
+                }
+
+                s3c_freq_dbg("%s: adjust %d to entry %d (%u)\n", __func__,
+                             target_freq, index, ftab[index].frequency);
+                target_freq = ftab[index].frequency;
+        }
+
+        target_freq *= 1000;  /* convert target to Hz */
+
+        /* find the settings for our new frequency */
+
+        if (!pll_reg || cpu_cur.lock_pll) {
+                /* either we've not got any PLL values, or we've locked
+                 * to the current one. */
+                pll = NULL;
+        } else {
+                struct cpufreq_policy tmp_policy;
+                int ret;
+
+                /* we keep the cpu pll table in Hz, to ensure we get an
+                 * accurate value for the PLL output. */
+
+                tmp_policy.min = policy->min * 1000;
+                tmp_policy.max = policy->max * 1000;
+                tmp_policy.cpu = policy->cpu;
+
+                /* cpufreq_frequency_table_target uses a pointer to 'index'
+                 * which is the number of the table entry, not the value of
+                 * the table entry's index field. */
+
+                ret = cpufreq_frequency_table_target(&tmp_policy, pll_reg,
+                                                     target_freq, relation,
+                                                     &index);
+
+                if (ret < 0) {
+                        printk(KERN_ERR "%s: no PLL available\n", __func__);
+                        goto err_notpossible;
+                }
+
+                pll = pll_reg + index;
+
+                s3c_freq_dbg("%s: target %u => %u\n",
+                             __func__, target_freq, pll->frequency);
+
+                target_freq = pll->frequency;
+        }
+
+        return s3c_cpufreq_settarget(policy, target_freq, pll);
+
+ err_notpossible:
+        printk(KERN_ERR "no compatible settings for %d\n", target_freq);
+        return -EINVAL;
+}
+
+static unsigned int s3c_cpufreq_get(unsigned int cpu)
+{
+        return clk_get_rate(clk_arm) / 1000;
+}
+
+struct clk *s3c_cpufreq_clk_get(struct device *dev, const char *name)
+{
+        struct clk *clk;
+
+        clk = clk_get(dev, name);
+        if (IS_ERR(clk))
+                printk(KERN_ERR "cpufreq: failed to get clock '%s'\n", name);
+
+        return clk;
+}
+
+static int s3c_cpufreq_init(struct cpufreq_policy *policy)
+{
+        printk(KERN_INFO "%s: initialising policy %p\n", __func__, policy);
+
+        if (policy->cpu != 0)
+                return -EINVAL;
+
+        policy->cur = s3c_cpufreq_get(0);
+        policy->min = policy->cpuinfo.min_freq = 0;
+        policy->max = policy->cpuinfo.max_freq = cpu_cur.info->max.fclk / 1000;
+        policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
+
+        /* feed the latency information from the cpu driver */
+        policy->cpuinfo.transition_latency = cpu_cur.info->latency;
+
+        if (ftab)
+                cpufreq_frequency_table_cpuinfo(policy, ftab);
+
+        return 0;
+}
+
+static __init int s3c_cpufreq_initclks(void)
+{
+        _clk_mpll = s3c_cpufreq_clk_get(NULL, "mpll");
+        _clk_xtal = s3c_cpufreq_clk_get(NULL, "xtal");
+        clk_fclk = s3c_cpufreq_clk_get(NULL, "fclk");
+        clk_hclk = s3c_cpufreq_clk_get(NULL, "hclk");
+        clk_pclk = s3c_cpufreq_clk_get(NULL, "pclk");
+        clk_arm = s3c_cpufreq_clk_get(NULL, "armclk");
+
+        if (IS_ERR(clk_fclk) || IS_ERR(clk_hclk) || IS_ERR(clk_pclk) ||
+            IS_ERR(_clk_mpll) || IS_ERR(clk_arm) || IS_ERR(_clk_xtal)) {
+                printk(KERN_ERR "%s: could not get clock(s)\n", __func__);
+                return -ENOENT;
+        }
+
+        printk(KERN_INFO "%s: clocks f=%lu,h=%lu,p=%lu,a=%lu\n", __func__,
+               clk_get_rate(clk_fclk) / 1000,
+               clk_get_rate(clk_hclk) / 1000,
+               clk_get_rate(clk_pclk) / 1000,
+               clk_get_rate(clk_arm) / 1000);
+
+        return 0;
+}
+
+static int s3c_cpufreq_verify(struct cpufreq_policy *policy)
+{
+        if (policy->cpu != 0)
+                return -EINVAL;
+
+        return 0;
+}
+
+#ifdef CONFIG_PM
+static struct cpufreq_frequency_table suspend_pll;
+static unsigned int suspend_freq;
+
+static int s3c_cpufreq_suspend(struct cpufreq_policy *policy, pm_message_t pmsg)
+{
+        suspend_pll.frequency = clk_get_rate(_clk_mpll);
+        suspend_pll.index = __raw_readl(S3C2410_MPLLCON);
+        suspend_freq = s3c_cpufreq_get(0) * 1000;
+
+        return 0;
+}
+
+static int s3c_cpufreq_resume(struct cpufreq_policy *policy)
+{
+        int ret;
+
+        s3c_freq_dbg("%s: resuming with policy %p\n", __func__, policy);
+
+        last_target = ~0;       /* invalidate last_target setting */
+
+        /* first, find out what speed we resumed at. */
+        s3c_cpufreq_resume_clocks();
+
+        /* whilst we will be called later on, we try and re-set the
+         * cpu frequencies as soon as possible so that we do not end
+         * up resuming devices and then immediatley having to re-set
+         * a number of settings once these devices have restarted.
+         *
+         * as a note, it is expected devices are not used until they
+         * have been un-suspended and at that time they should have
+         * used the updated clock settings.
+         */
+
+        ret = s3c_cpufreq_settarget(NULL, suspend_freq, &suspend_pll);
+        if (ret) {
+                printk(KERN_ERR "%s: failed to reset pll/freq\n", __func__);
+                return ret;
+        }
+
+        return 0;
+}
+#else
+#define s3c_cpufreq_resume NULL
+#define s3c_cpufreq_suspend NULL
+#endif
+
+static struct cpufreq_driver s3c24xx_driver = {
+        .flags          = CPUFREQ_STICKY,
+        .verify         = s3c_cpufreq_verify,
+        .target         = s3c_cpufreq_target,
+        .get            = s3c_cpufreq_get,
+        .init           = s3c_cpufreq_init,
+        .suspend        = s3c_cpufreq_suspend,
+        .resume         = s3c_cpufreq_resume,
+        .name           = "s3c24xx",
+};
+
+
+int __init s3c_cpufreq_register(struct s3c_cpufreq_info *info)
+{
+        if (!info || !info->name) {
+                printk(KERN_ERR "%s: failed to pass valid information\n",
+                       __func__);
+                return -EINVAL;
+        }
+
+        printk(KERN_INFO "S3C24XX CPU Frequency driver, %s cpu support\n",
+               info->name);
+
+        /* check our driver info has valid data */
+
+        BUG_ON(info->set_refresh == NULL);
+        BUG_ON(info->set_divs == NULL);
+        BUG_ON(info->calc_divs == NULL);
+
+        /* info->set_fvco is optional, depending on whether there
+         * is a need to set the clock code. */
+
+        cpu_cur.info = info;
+
+        /* Note, driver registering should probably update locktime */
+
+        return 0;
+}
+
+int __init s3c_cpufreq_setboard(struct s3c_cpufreq_board *board)
+{
+        struct s3c_cpufreq_board *ours;
+
+        if (!board) {
+                printk(KERN_INFO "%s: no board data\n", __func__);
+                return -EINVAL;
+        }
+
+        /* Copy the board information so that each board can make this
+         * initdata. */
+
+        ours = kzalloc(sizeof(struct s3c_cpufreq_board), GFP_KERNEL);
+        if (ours == NULL) {
+                printk(KERN_ERR "%s: no memory\n", __func__);
+                return -ENOMEM;
+        }
+
+        *ours = *board;
+        cpu_cur.board = ours;
+
+        return 0;
+}
+
+int __init s3c_cpufreq_auto_io(void)
+{
+        int ret;
+
+        if (!cpu_cur.info->get_iotiming) {
+                printk(KERN_ERR "%s: get_iotiming undefined\n", __func__);
+                return -ENOENT;
+        }
+
+        printk(KERN_INFO "%s: working out IO settings\n", __func__);
+
+        ret = (cpu_cur.info->get_iotiming)(&cpu_cur, &s3c24xx_iotiming);
+        if (ret)
+                printk(KERN_ERR "%s: failed to get timings\n", __func__);
+
+        return ret;
+}
+
+/* if one or is zero, then return the other, otherwise return the min */
+#define do_min(_a, _b) ((_a) == 0 ? (_b) : (_b) == 0 ? (_a) : min(_a, _b))
+
+/**
+ * s3c_cpufreq_freq_min - find the minimum settings for the given freq.
+ * @dst: The destination structure
+ * @a: One argument.
+ * @b: The other argument.
+ *
+ * Create a minimum of each frequency entry in the 'struct s3c_freq',
+ * unless the entry is zero when it is ignored and the non-zero argument
+ * used.
+ */
+static void s3c_cpufreq_freq_min(struct s3c_freq *dst,
+                                 struct s3c_freq *a, struct s3c_freq *b)
+{
+        dst->fclk = do_min(a->fclk, b->fclk);
+        dst->hclk = do_min(a->hclk, b->hclk);
+        dst->pclk = do_min(a->pclk, b->pclk);
+        dst->armclk = do_min(a->armclk, b->armclk);
+}
+
+static inline u32 calc_locktime(u32 freq, u32 time_us)
+{
+        u32 result;
+
+        result = freq * time_us;
+        result = DIV_ROUND_UP(result, 1000 * 1000);
+
+        return result;
+}
+
+static void s3c_cpufreq_update_loctkime(void)
+{
+        unsigned int bits = cpu_cur.info->locktime_bits;
+        u32 rate = (u32)clk_get_rate(_clk_xtal);
+        u32 val;
+
+        if (bits == 0) {
+                WARN_ON(1);
+                return;
+        }
+
+        val = calc_locktime(rate, cpu_cur.info->locktime_u) << bits;
+        val |= calc_locktime(rate, cpu_cur.info->locktime_m);
+
+        printk(KERN_INFO "%s: new locktime is 0x%08x\n", __func__, val);
+        __raw_writel(val, S3C2410_LOCKTIME);
+}
+
+static int s3c_cpufreq_build_freq(void)
+{
+        int size, ret;
+
+        if (!cpu_cur.info->calc_freqtable)
+                return -EINVAL;
+
+        kfree(ftab);
+        ftab = NULL;
+
+        size = cpu_cur.info->calc_freqtable(&cpu_cur, NULL, 0);
+        size++;
+
+        ftab = kmalloc(sizeof(struct cpufreq_frequency_table) * size, GFP_KERNEL);
+        if (!ftab) {
+                printk(KERN_ERR "%s: no memory for tables\n", __func__);
+                return -ENOMEM;
+        }
+
+        ftab_size = size;
+
+        ret = cpu_cur.info->calc_freqtable(&cpu_cur, ftab, size);
+        s3c_cpufreq_addfreq(ftab, ret, size, CPUFREQ_TABLE_END);
+
+        return 0;
+}
+
+static int __init s3c_cpufreq_initcall(void)
+{
+        int ret = 0;
+
+        if (cpu_cur.info && cpu_cur.board) {
+                ret = s3c_cpufreq_initclks();
+                if (ret)
+                        goto out;
+
+                /* get current settings */
+                s3c_cpufreq_getcur(&cpu_cur);
+                s3c_cpufreq_show("cur", &cpu_cur);
+
+                if (cpu_cur.board->auto_io) {
+                        ret = s3c_cpufreq_auto_io();
+                        if (ret) {
+                                printk(KERN_ERR "%s: failed to get io timing\n",
+                                       __func__);
+                                goto out;
+                        }
+                }
+
+                if (cpu_cur.board->need_io && !cpu_cur.info->set_iotiming) {
+                        printk(KERN_ERR "%s: no IO support registered\n",
+                               __func__);
+                        ret = -EINVAL;
+                        goto out;
+                }
+
+                if (!cpu_cur.info->need_pll)
+                        cpu_cur.lock_pll = 1;
+
+                s3c_cpufreq_update_loctkime();
+
+                s3c_cpufreq_freq_min(&cpu_cur.max, &cpu_cur.board->max,
+                                     &cpu_cur.info->max);
+
+                if (cpu_cur.info->calc_freqtable)
+                        s3c_cpufreq_build_freq();
+
+                ret = cpufreq_register_driver(&s3c24xx_driver);
+        }
+
+ out:
+        return ret;
+}
+
+late_initcall(s3c_cpufreq_initcall);
+
+/**
+ * s3c_plltab_register - register CPU PLL table.
+ * @plls: The list of PLL entries.
+ * @plls_no: The size of the PLL entries @plls.
+ *
+ * Register the given set of PLLs with the system.
+ */
+int __init s3c_plltab_register(struct cpufreq_frequency_table *plls,
+                               unsigned int plls_no)
+{
+        struct cpufreq_frequency_table *vals;
+        unsigned int size;
+
+        size = sizeof(struct cpufreq_frequency_table) * (plls_no + 1);
+
+        vals = kmalloc(size, GFP_KERNEL);
+        if (vals) {
+                memcpy(vals, plls, size);
+                pll_reg = vals;
+
+                /* write a terminating entry, we don't store it in the
+                 * table that is stored in the kernel */
+                vals += plls_no;
+                vals->frequency = CPUFREQ_TABLE_END;
+
+                printk(KERN_INFO "cpufreq: %d PLL entries\n", plls_no);
+        } else
+                printk(KERN_ERR "cpufreq: no memory for PLL tables\n");
+
+        return vals ? 0 : -ENOMEM;
+}
diff --git a/arch/arm/plat-s3c24xx/cpu.c b/arch/arm/plat-s3c24xx/cpu.c
index 1932b7e0da15..5447e60f3936 100644
--- a/arch/arm/plat-s3c24xx/cpu.c
+++ b/arch/arm/plat-s3c24xx/cpu.c
@@ -81,7 +81,7 @@ static struct cpu_table cpu_ids[] __initdata = {
                 .map_io         = s3c2410_map_io,
                 .init_clocks    = s3c2410_init_clocks,
                 .init_uarts     = s3c2410_init_uarts,
-                .init           = s3c2410_init,
+                .init           = s3c2410a_init,
                 .name           = name_s3c2410a
         },
         {
diff --git a/arch/arm/plat-s3c24xx/devs.c b/arch/arm/plat-s3c24xx/devs.c
index 4eb378c89a39..f52a92ce8dda 100644
--- a/arch/arm/plat-s3c24xx/devs.c
+++ b/arch/arm/plat-s3c24xx/devs.c
@@ -26,6 +26,8 @@
 #include <asm/mach/irq.h>
 #include <mach/fb.h>
 #include <mach/hardware.h>
+#include <mach/dma.h>
+#include <mach/irqs.h>
 #include <asm/irq.h>
 
 #include <plat/regs-serial.h>
@@ -180,25 +182,6 @@ void __init s3c24xx_fb_set_platdata(struct s3c2410fb_mach_info *pd)
         }
 }
 
-/* NAND Controller */
-
-static struct resource s3c_nand_resource[] = {
-        [0] = {
-                .start = S3C24XX_PA_NAND,
-                .end   = S3C24XX_PA_NAND + S3C24XX_SZ_NAND - 1,
-                .flags = IORESOURCE_MEM,
-        }
-};
-
-struct platform_device s3c_device_nand = {
-        .name             = "s3c2410-nand",
-        .id               = -1,
-        .num_resources    = ARRAY_SIZE(s3c_nand_resource),
-        .resource         = s3c_nand_resource,
-};
-
-EXPORT_SYMBOL(s3c_device_nand);
-
 /* USB Device (Gadget)*/
 
 static struct resource s3c_usbgadget_resource[] = {
@@ -348,7 +331,7 @@ struct platform_device s3c_device_adc = {
 /* HWMON */
 
 struct platform_device s3c_device_hwmon = {
-        .name           = "s3c24xx-hwmon",
+        .name           = "s3c-hwmon",
         .id             = -1,
         .dev.parent     = &s3c_device_adc.dev,
 };
@@ -473,4 +456,52 @@ struct platform_device s3c_device_camif = {
 
 EXPORT_SYMBOL(s3c_device_camif);
 
+/* AC97 */
+
+static struct resource s3c_ac97_resource[] = {
+        [0] = {
+                .start = S3C2440_PA_AC97,
+                .end   = S3C2440_PA_AC97 + S3C2440_SZ_AC97 -1,
+                .flags = IORESOURCE_MEM,
+        },
+        [1] = {
+                .start = IRQ_S3C244x_AC97,
+                .end   = IRQ_S3C244x_AC97,
+                .flags = IORESOURCE_IRQ,
+        },
+        [2] = {
+                .name  = "PCM out",
+                .start = DMACH_PCM_OUT,
+                .end   = DMACH_PCM_OUT,
+                .flags = IORESOURCE_DMA,
+        },
+        [3] = {
+                .name  = "PCM in",
+                .start = DMACH_PCM_IN,
+                .end   = DMACH_PCM_IN,
+                .flags = IORESOURCE_DMA,
+        },
+        [4] = {
+                .name  = "Mic in",
+                .start = DMACH_MIC_IN,
+                .end   = DMACH_MIC_IN,
+                .flags = IORESOURCE_DMA,
+        },
+};
+
+static u64 s3c_device_ac97_dmamask = 0xffffffffUL;
+
+struct platform_device s3c_device_ac97 = {
+        .name             = "s3c-ac97",
+        .id               = -1,
+        .num_resources    = ARRAY_SIZE(s3c_ac97_resource),
+        .resource         = s3c_ac97_resource,
+        .dev              = {
+                .dma_mask = &s3c_device_ac97_dmamask,
+                .coherent_dma_mask = 0xffffffffUL
+        }
+};
+
+EXPORT_SYMBOL(s3c_device_ac97);
+
 #endif // CONFIG_CPU_S32440
diff --git a/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h b/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h
new file mode 100644
index 000000000000..efeb025affc7
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h
@@ -0,0 +1,282 @@
+/* arch/arm/plat-s3c/include/plat/cpu-freq.h
+ *
+ * Copyright (c) 2006,2007,2009 Simtec Electronics
+ *      http://armlinux.simtec.co.uk/
+ *      Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C CPU frequency scaling support - core support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <plat/cpu-freq.h>
+
+struct seq_file;
+
+#define MAX_BANKS (8)
+#define S3C2412_MAX_IO  (8)
+
+/**
+ * struct s3c2410_iobank_timing - IO bank timings for S3C2410 style timings
+ * @bankcon: The cached version of settings in this structure.
+ * @tacp:
+ * @tacs: Time from address valid to nCS asserted.
+ * @tcos: Time from nCS asserted to nOE or nWE asserted.
+ * @tacc: Time that nOE or nWE is asserted.
+ * @tcoh: Time nCS is held after nOE or nWE are released.
+ * @tcah: Time address is held for after
+ * @nwait_en: Whether nWAIT is enabled for this bank.
+ *
+ * This structure represents the IO timings for a S3C2410 style IO bank
+ * used by the CPU frequency support if it needs to change the settings
+ * of the IO.
+ */
+struct s3c2410_iobank_timing {
+        unsigned long   bankcon;
+        unsigned int    tacp;
+        unsigned int    tacs;
+        unsigned int    tcos;
+        unsigned int    tacc;
+        unsigned int    tcoh;           /* nCS hold afrer nOE/nWE */
+        unsigned int    tcah;           /* Address hold after nCS */
+        unsigned char   nwait_en;       /* nWait enabled for bank. */
+};
+
+/**
+ * struct s3c2412_iobank_timing - io timings for PL092 (S3C2412) style IO
+ * @idcy: The idle cycle time between transactions.
+ * @wstrd: nCS release to end of read cycle.
+ * @wstwr: nCS release to end of write cycle.
+ * @wstoen: nCS assertion to nOE assertion time.
+ * @wstwen: nCS assertion to nWE assertion time.
+ * @wstbrd: Burst ready delay.
+ * @smbidcyr: Register cache for smbidcyr value.
+ * @smbwstrd: Register cache for smbwstrd value.
+ * @smbwstwr: Register cache for smbwstwr value.
+ * @smbwstoen: Register cache for smbwstoen value.
+ * @smbwstwen: Register cache for smbwstwen value.
+ * @smbwstbrd: Register cache for smbwstbrd value.
+ *
+ * Timing information for a IO bank on an S3C2412 or similar system which
+ * uses a PL093 block.
+ */
+struct s3c2412_iobank_timing {
+        unsigned int    idcy;
+        unsigned int    wstrd;
+        unsigned int    wstwr;
+        unsigned int    wstoen;
+        unsigned int    wstwen;
+        unsigned int    wstbrd;
+
+        /* register cache */
+        unsigned char   smbidcyr;
+        unsigned char   smbwstrd;
+        unsigned char   smbwstwr;
+        unsigned char   smbwstoen;
+        unsigned char   smbwstwen;
+        unsigned char   smbwstbrd;
+};
+
+union s3c_iobank {
+        struct s3c2410_iobank_timing    *io_2410;
+        struct s3c2412_iobank_timing    *io_2412;
+};
+
+/**
+ * struct s3c_iotimings - Chip IO timings holder
+ * @bank: The timings for each IO bank.
+ */
+struct s3c_iotimings {
+        union s3c_iobank        bank[MAX_BANKS];
+};
+
+/**
+ * struct s3c_plltab - PLL table information.
+ * @vals: List of PLL values.
+ * @size: Size of the PLL table @vals.
+ */
+struct s3c_plltab {
+        struct s3c_pllval       *vals;
+        int                      size;
+};
+
+/**
+ * struct s3c_cpufreq_config - current cpu frequency configuration
+ * @freq: The current settings for the core clocks.
+ * @max: Maxium settings, derived from core, board and user settings.
+ * @pll: The PLL table entry for the current PLL settings.
+ * @divs: The divisor settings for the core clocks.
+ * @info: The current core driver information.
+ * @board: The information for the board we are running on.
+ * @lock_pll: Set if the PLL settings cannot be changed.
+ *
+ * This is for the core drivers that need to know information about
+ * the current settings and values. It should not be needed by any
+ * device drivers.
+*/
+struct s3c_cpufreq_config {
+        struct s3c_freq         freq;
+        struct s3c_freq         max;
+        struct cpufreq_frequency_table pll;
+        struct s3c_clkdivs      divs;
+        struct s3c_cpufreq_info *info;  /* for core, not drivers */
+        struct s3c_cpufreq_board *board;
+
+        unsigned int    lock_pll:1;
+};
+
+/**
+ * struct s3c_cpufreq_info - Information for the CPU frequency driver.
+ * @name: The name of this implementation.
+ * @max: The maximum frequencies for the system.
+ * @latency: Transition latency to give to cpufreq.
+ * @locktime_m: The lock-time in uS for the MPLL.
+ * @locktime_u: The lock-time in uS for the UPLL.
+ * @locttime_bits: The number of bits each LOCKTIME field.
+ * @need_pll: Set if this driver needs to change the PLL values to acheive
+ *      any frequency changes. This is really only need by devices like the
+ *      S3C2410 where there is no or limited divider between the PLL and the
+ *      ARMCLK.
+ * @resume_clocks: Update the clocks on resume.
+ * @get_iotiming: Get the current IO timing data, mainly for use at start.
+ * @set_iotiming: Update the IO timings from the cached copies calculated
+ *      from the @calc_iotiming entry when changing the frequency.
+ * @calc_iotiming: Calculate and update the cached copies of the IO timings
+ *      from the newly calculated frequencies.
+ * @calc_freqtable: Calculate (fill in) the given frequency table from the
+ *      current frequency configuration. If the table passed in is NULL,
+ *      then the return is the number of elements to be filled for allocation
+ *      of the table.
+ * @set_refresh: Set the memory refresh configuration.
+ * @set_fvco: Set the PLL frequencies.
+ * @set_divs: Update the clock divisors.
+ * @calc_divs: Calculate the clock divisors.
+ */
+struct s3c_cpufreq_info {
+        const char              *name;
+        struct s3c_freq         max;
+
+        unsigned int            latency;
+
+        unsigned int            locktime_m;
+        unsigned int            locktime_u;
+        unsigned char           locktime_bits;
+
+        unsigned int            need_pll:1;
+
+        /* driver routines */
+
+        void            (*resume_clocks)(void);
+
+        int             (*get_iotiming)(struct s3c_cpufreq_config *cfg,
+                                        struct s3c_iotimings *timings);
+
+        void            (*set_iotiming)(struct s3c_cpufreq_config *cfg,
+                                        struct s3c_iotimings *timings);
+
+        int             (*calc_iotiming)(struct s3c_cpufreq_config *cfg,
+                                         struct s3c_iotimings *timings);
+
+        int             (*calc_freqtable)(struct s3c_cpufreq_config *cfg,
+                                          struct cpufreq_frequency_table *t,
+                                          size_t table_size);
+
+        void            (*debug_io_show)(struct seq_file *seq,
+                                         struct s3c_cpufreq_config *cfg,
+                                         union s3c_iobank *iob);
+
+        void            (*set_refresh)(struct s3c_cpufreq_config *cfg);
+        void            (*set_fvco)(struct s3c_cpufreq_config *cfg);
+        void            (*set_divs)(struct s3c_cpufreq_config *cfg);
+        int             (*calc_divs)(struct s3c_cpufreq_config *cfg);
+};
+
+extern int s3c_cpufreq_register(struct s3c_cpufreq_info *info);
+
+extern int s3c_plltab_register(struct cpufreq_frequency_table *plls, unsigned int plls_no);
+
+/* exports and utilities for debugfs */
+extern struct s3c_cpufreq_config *s3c_cpufreq_getconfig(void);
+extern struct s3c_iotimings *s3c_cpufreq_getiotimings(void);
+
+extern void s3c2410_iotiming_debugfs(struct seq_file *seq,
+                                     struct s3c_cpufreq_config *cfg,
+                                     union s3c_iobank *iob);
+
+extern void s3c2412_iotiming_debugfs(struct seq_file *seq,
+                                     struct s3c_cpufreq_config *cfg,
+                                     union s3c_iobank *iob);
+
+#ifdef CONFIG_CPU_FREQ_S3C24XX_DEBUGFS
+#define s3c_cpufreq_debugfs_call(x) x
+#else
+#define s3c_cpufreq_debugfs_call(x) NULL
+#endif
+
+/* Useful utility functions. */
+
+extern struct clk *s3c_cpufreq_clk_get(struct device *, const char *);
+
+/* S3C2410 and compatible exported functions */
+
+extern void s3c2410_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg);
+
+extern int s3c2410_iotiming_calc(struct s3c_cpufreq_config *cfg,
+                                 struct s3c_iotimings *iot);
+
+extern int s3c2410_iotiming_get(struct s3c_cpufreq_config *cfg,
+                                struct s3c_iotimings *timings);
+
+extern void s3c2410_iotiming_set(struct s3c_cpufreq_config *cfg,
+                                 struct s3c_iotimings *iot);
+
+extern void s3c2410_set_fvco(struct s3c_cpufreq_config *cfg);
+
+/* S3C2412 compatible routines */
+
+extern int s3c2412_iotiming_get(struct s3c_cpufreq_config *cfg,
+                                struct s3c_iotimings *timings);
+
+extern int s3c2412_iotiming_get(struct s3c_cpufreq_config *cfg,
+                                struct s3c_iotimings *timings);
+
+extern int s3c2412_iotiming_calc(struct s3c_cpufreq_config *cfg,
+                                 struct s3c_iotimings *iot);
+
+extern void s3c2412_iotiming_set(struct s3c_cpufreq_config *cfg,
+                                 struct s3c_iotimings *iot);
+
+#ifdef CONFIG_CPU_FREQ_S3C24XX_DEBUG
+#define s3c_freq_dbg(x...) printk(KERN_INFO x)
+#else
+#define s3c_freq_dbg(x...) do { if (0) printk(x); } while (0)
+#endif /* CONFIG_CPU_FREQ_S3C24XX_DEBUG */
+
+#ifdef CONFIG_CPU_FREQ_S3C24XX_IODEBUG
+#define s3c_freq_iodbg(x...) printk(KERN_INFO x)
+#else
+#define s3c_freq_iodbg(x...) do { if (0) printk(x); } while (0)
+#endif /* CONFIG_CPU_FREQ_S3C24XX_IODEBUG */
+
+static inline int s3c_cpufreq_addfreq(struct cpufreq_frequency_table *table,
+                                      int index, size_t table_size,
+                                      unsigned int freq)
+{
+        if (index < 0)
+                return index;
+
+        if (table) {
+                if (index >= table_size)
+                        return -ENOMEM;
+
+                s3c_freq_dbg("%s: { %d = %u kHz }\n",
+                             __func__, index, freq);
+
+                table[index].index = index;
+                table[index].frequency = freq;
+        }
+
+        return index + 1;
+}
diff --git a/arch/arm/plat-s3c24xx/include/plat/fiq.h b/arch/arm/plat-s3c24xx/include/plat/fiq.h
new file mode 100644
index 000000000000..8521b8372c5f
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/include/plat/fiq.h
@@ -0,0 +1,13 @@
+/* linux/include/asm-arm/plat-s3c24xx/fiq.h
+ *
+ * Copyright (c) 2009 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *
+ * Header file for S3C24XX CPU FIQ support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+extern int s3c24xx_set_fiq(unsigned int irq, bool on);
diff --git a/arch/arm/plat-s3c24xx/include/plat/s3c2410.h b/arch/arm/plat-s3c24xx/include/plat/s3c2410.h
index a9ac9e29759e..b6deeef8f663 100644
--- a/arch/arm/plat-s3c24xx/include/plat/s3c2410.h
+++ b/arch/arm/plat-s3c24xx/include/plat/s3c2410.h
@@ -14,6 +14,7 @@
 #ifdef CONFIG_CPU_S3C2410
 
 extern  int s3c2410_init(void);
+extern  int s3c2410a_init(void);
 
 extern void s3c2410_map_io(void);
 
diff --git a/arch/arm/plat-s3c24xx/irq.c b/arch/arm/plat-s3c24xx/irq.c
index 958737775ad2..d02f5f02045e 100644
--- a/arch/arm/plat-s3c24xx/irq.c
+++ b/arch/arm/plat-s3c24xx/irq.c
@@ -493,6 +493,38 @@ s3c_irq_demux_extint4t7(unsigned int irq,
         }
 }
 
+#ifdef CONFIG_FIQ
+/**
+ * s3c24xx_set_fiq - set the FIQ routing
+ * @irq: IRQ number to route to FIQ on processor.
+ * @on: Whether to route @irq to the FIQ, or to remove the FIQ routing.
+ *
+ * Change the state of the IRQ to FIQ routing depending on @irq and @on. If
+ * @on is true, the @irq is checked to see if it can be routed and the
+ * interrupt controller updated to route the IRQ. If @on is false, the FIQ
+ * routing is cleared, regardless of which @irq is specified.
+ */
+int s3c24xx_set_fiq(unsigned int irq, bool on)
+{
+        u32 intmod;
+        unsigned offs;
+
+        if (on) {
+                offs = irq - FIQ_START;
+                if (offs > 31)
+                        return -EINVAL;
+
+                intmod = 1 << offs;
+        } else {
+                intmod = 0;
+        }
+
+        __raw_writel(intmod, S3C2410_INTMOD);
+        return 0;
+}
+#endif
+
+
 /* s3c24xx_init_irq
  *
  * Initialise S3C2410 IRQ system
@@ -505,6 +537,10 @@ void __init s3c24xx_init_irq(void)
         int irqno;
         int i;
 
+#ifdef CONFIG_FIQ
+        init_FIQ();
+#endif
+
         irqdbf("s3c2410_init_irq: clearing interrupt status flags\n");
 
         /* first, clear all interrupts pending... */
diff --git a/arch/arm/plat-s3c24xx/s3c2410-cpufreq-utils.c b/arch/arm/plat-s3c24xx/s3c2410-cpufreq-utils.c
new file mode 100644
index 000000000000..43ea80190d87
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/s3c2410-cpufreq-utils.c
@@ -0,0 +1,64 @@
+/* linux/arch/arm/plat-s3c24xx/s3c2410-cpufreq-utils.c
+ *
+ * Copyright (c) 2009 Simtec Electronics
+ *      http://armlinux.simtec.co.uk/
+ *      Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C24XX CPU Frequency scaling - utils for S3C2410/S3C2440/S3C2442
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/cpufreq.h>
+#include <linux/io.h>
+
+#include <mach/map.h>
+#include <mach/regs-mem.h>
+#include <mach/regs-clock.h>
+
+#include <plat/cpu-freq-core.h>
+
+/**
+ * s3c2410_cpufreq_setrefresh - set SDRAM refresh value
+ * @cfg: The frequency configuration
+ *
+ * Set the SDRAM refresh value appropriately for the configured
+ * frequency.
+ */
+void s3c2410_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg)
+{
+        struct s3c_cpufreq_board *board = cfg->board;
+        unsigned long refresh;
+        unsigned long refval;
+
+        /* Reduce both the refresh time (in ns) and the frequency (in MHz)
+         * down to ensure that we do not overflow 32 bit numbers.
+         *
+         * This should work for HCLK up to 133MHz and refresh period up
+         * to 30usec.
+         */
+
+        refresh = (cfg->freq.hclk / 100) * (board->refresh / 10);
+        refresh = DIV_ROUND_UP(refresh, (1000 * 1000)); /* apply scale  */
+        refresh = (1 << 11) + 1 - refresh;
+
+        s3c_freq_dbg("%s: refresh value %lu\n", __func__, refresh);
+
+        refval = __raw_readl(S3C2410_REFRESH);
+        refval &= ~((1 << 12) - 1);
+        refval |= refresh;
+        __raw_writel(refval, S3C2410_REFRESH);
+}
+
+/**
+ * s3c2410_set_fvco - set the PLL value
+ * @cfg: The frequency configuration
+ */
+void s3c2410_set_fvco(struct s3c_cpufreq_config *cfg)
+{
+        __raw_writel(cfg->pll.index, S3C2410_MPLLCON);
+}
diff --git a/arch/arm/plat-s3c24xx/s3c2410-iotiming.c b/arch/arm/plat-s3c24xx/s3c2410-iotiming.c
new file mode 100644
index 000000000000..d0a3a145cd4d
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/s3c2410-iotiming.c
@@ -0,0 +1,477 @@
+/* linux/arch/arm/plat-s3c24xx/s3c2410-iotiming.c
+ *
+ * Copyright (c) 2006,2008,2009 Simtec Electronics
+ *      http://armlinux.simtec.co.uk/
+ *      Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C24XX CPU Frequency scaling - IO timing for S3C2410/S3C2440/S3C2442
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/cpufreq.h>
+#include <linux/seq_file.h>
+#include <linux/io.h>
+
+#include <mach/map.h>
+#include <mach/regs-mem.h>
+#include <mach/regs-clock.h>
+
+#include <plat/cpu-freq-core.h>
+
+#define print_ns(x) ((x) / 10), ((x) % 10)
+
+/**
+ * s3c2410_print_timing - print bank timing data for debug purposes
+ * @pfx: The prefix to put on the output
+ * @timings: The timing inforamtion to print.
+*/
+static void s3c2410_print_timing(const char *pfx,
+                                 struct s3c_iotimings *timings)
+{
+        struct s3c2410_iobank_timing *bt;
+        int bank;
+
+        for (bank = 0; bank < MAX_BANKS; bank++) {
+                bt = timings->bank[bank].io_2410;
+                if (!bt)
+                        continue;
+
+                printk(KERN_DEBUG "%s %d: Tacs=%d.%d, Tcos=%d.%d, Tacc=%d.%d, "
+                       "Tcoh=%d.%d, Tcah=%d.%d\n", pfx, bank,
+                       print_ns(bt->tacs),
+                       print_ns(bt->tcos),
+                       print_ns(bt->tacc),
+                       print_ns(bt->tcoh),
+                       print_ns(bt->tcah));
+        }
+}
+
+/**
+ * bank_reg - convert bank number to pointer to the control register.
+ * @bank: The IO bank number.
+ */
+static inline void __iomem *bank_reg(unsigned int bank)
+{
+        return S3C2410_BANKCON0 + (bank << 2);
+}
+
+/**
+ * bank_is_io - test whether bank is used for IO
+ * @bankcon: The bank control register.
+ *
+ * This is a simplistic test to see if any BANKCON[x] is not an IO
+ * bank. It currently does not take into account whether BWSCON has
+ * an illegal width-setting in it, or if the pin connected to nCS[x]
+ * is actually being handled as a chip-select.
+ */
+static inline int bank_is_io(unsigned long bankcon)
+{
+        return !(bankcon & S3C2410_BANKCON_SDRAM);
+}
+
+/**
+ * to_div - convert cycle time to divisor
+ * @cyc: The cycle time, in 10ths of nanoseconds.
+ * @hclk_tns: The cycle time for HCLK, in 10ths of nanoseconds.
+ *
+ * Convert the given cycle time into the divisor to use to obtain it from
+ * HCLK.
+*/
+static inline unsigned int to_div(unsigned int cyc, unsigned int hclk_tns)
+{
+        if (cyc == 0)
+                return 0;
+
+        return DIV_ROUND_UP(cyc, hclk_tns);
+}
+
+/**
+ * calc_0124 - calculate divisor control for divisors that do /0, /1. /2 and /4
+ * @cyc: The cycle time, in 10ths of nanoseconds.
+ * @hclk_tns: The cycle time for HCLK, in 10ths of nanoseconds.
+ * @v: Pointer to register to alter.
+ * @shift: The shift to get to the control bits.
+ *
+ * Calculate the divisor, and turn it into the correct control bits to
+ * set in the result, @v.
+ */
+static unsigned int calc_0124(unsigned int cyc, unsigned long hclk_tns,
+                              unsigned long *v, int shift)
+{
+        unsigned int div = to_div(cyc, hclk_tns);
+        unsigned long val;
+
+        s3c_freq_iodbg("%s: cyc=%d, hclk=%lu, shift=%d => div %d\n",
+                       __func__, cyc, hclk_tns, shift, div);
+
+        switch (div) {
+        case 0:
+                val = 0;
+                break;
+        case 1:
+                val = 1;
+                break;
+        case 2:
+                val = 2;
+                break;
+        case 3:
+        case 4:
+                val = 3;
+                break;
+        default:
+                return -1;
+        }
+
+        *v |= val << shift;
+        return 0;
+}
+
+int calc_tacp(unsigned int cyc, unsigned long hclk, unsigned long *v)
+{
+        /* Currently no support for Tacp calculations. */
+        return 0;
+}
+
+/**
+ * calc_tacc - calculate divisor control for tacc.
+ * @cyc: The cycle time, in 10ths of nanoseconds.
+ * @nwait_en: IS nWAIT enabled for this bank.
+ * @hclk_tns: The cycle time for HCLK, in 10ths of nanoseconds.
+ * @v: Pointer to register to alter.
+ *
+ * Calculate the divisor control for tACC, taking into account whether
+ * the bank has nWAIT enabled. The result is used to modify the value
+ * pointed to by @v.
+*/
+static int calc_tacc(unsigned int cyc, int nwait_en,
+                     unsigned long hclk_tns, unsigned long *v)
+{
+        unsigned int div = to_div(cyc, hclk_tns);
+        unsigned long val;
+
+        s3c_freq_iodbg("%s: cyc=%u, nwait=%d, hclk=%lu => div=%u\n",
+                       __func__, cyc, nwait_en, hclk_tns, div);
+
+        /* if nWait enabled on an bank, Tacc must be at-least 4 cycles. */
+        if (nwait_en && div < 4)
+                div = 4;
+
+        switch (div) {
+        case 0:
+                val = 0;
+                break;
+
+        case 1:
+        case 2:
+        case 3:
+        case 4:
+                val = div - 1;
+                break;
+
+        case 5:
+        case 6:
+                val = 4;
+                break;
+
+        case 7:
+        case 8:
+                val = 5;
+                break;
+
+        case 9:
+        case 10:
+                val = 6;
+                break;
+
+        case 11:
+        case 12:
+        case 13:
+        case 14:
+                val = 7;
+                break;
+
+        default:
+                return -1;
+        }
+
+        *v |= val << 8;
+        return 0;
+}
+
+/**
+ * s3c2410_calc_bank - calculate bank timing infromation
+ * @cfg: The configuration we need to calculate for.
+ * @bt: The bank timing information.
+ *
+ * Given the cycle timine for a bank @bt, calculate the new BANKCON
+ * setting for the @cfg timing. This updates the timing information
+ * ready for the cpu frequency change.
+ */
+static int s3c2410_calc_bank(struct s3c_cpufreq_config *cfg,
+                             struct s3c2410_iobank_timing *bt)
+{
+        unsigned long hclk = cfg->freq.hclk_tns;
+        unsigned long res;
+        int ret;
+
+        res  = bt->bankcon;
+        res &= (S3C2410_BANKCON_SDRAM | S3C2410_BANKCON_PMC16);
+
+        /* tacp: 2,3,4,5 */
+        /* tcah: 0,1,2,4 */
+        /* tcoh: 0,1,2,4 */
+        /* tacc: 1,2,3,4,6,7,10,14 (>4 for nwait) */
+        /* tcos: 0,1,2,4 */
+        /* tacs: 0,1,2,4 */
+
+        ret  = calc_0124(bt->tacs, hclk, &res, S3C2410_BANKCON_Tacs_SHIFT);
+        ret |= calc_0124(bt->tcos, hclk, &res, S3C2410_BANKCON_Tcos_SHIFT);
+        ret |= calc_0124(bt->tcah, hclk, &res, S3C2410_BANKCON_Tcah_SHIFT);
+        ret |= calc_0124(bt->tcoh, hclk, &res, S3C2410_BANKCON_Tcoh_SHIFT);
+
+        if (ret)
+                return -EINVAL;
+
+        ret |= calc_tacp(bt->tacp, hclk, &res);
+        ret |= calc_tacc(bt->tacc, bt->nwait_en, hclk, &res);
+
+        if (ret)
+                return -EINVAL;
+
+        bt->bankcon = res;
+        return 0;
+}
+
+static unsigned int tacc_tab[] = {
+        [0]     = 1,
+        [1]     = 2,
+        [2]     = 3,
+        [3]     = 4,
+        [4]     = 6,
+        [5]     = 9,
+        [6]     = 10,
+        [7]     = 14,
+};
+
+/**
+ * get_tacc - turn tACC value into cycle time
+ * @hclk_tns: The cycle time for HCLK, in 10ths of nanoseconds.
+ * @val: The bank timing register value, shifed down.
+ */
+static unsigned int get_tacc(unsigned long hclk_tns,
+                             unsigned long val)
+{
+        val &= 7;
+        return hclk_tns * tacc_tab[val];
+}
+
+/**
+ * get_0124 - turn 0/1/2/4 divider into cycle time
+ * @hclk_tns: The cycle time for HCLK, in 10ths of nanoseconds.
+ * @val: The bank timing register value, shifed down.
+ */
+static unsigned int get_0124(unsigned long hclk_tns,
+                             unsigned long val)
+{
+        val &= 3;
+        return hclk_tns * ((val == 3) ? 4 : val);
+}
+
+/**
+ * s3c2410_iotiming_getbank - turn BANKCON into cycle time information
+ * @cfg: The frequency configuration
+ * @bt: The bank timing to fill in (uses cached BANKCON)
+ *
+ * Given the BANKCON setting in @bt and the current frequency settings
+ * in @cfg, update the cycle timing information.
+ */
+void s3c2410_iotiming_getbank(struct s3c_cpufreq_config *cfg,
+                              struct s3c2410_iobank_timing *bt)
+{
+        unsigned long bankcon = bt->bankcon;
+        unsigned long hclk = cfg->freq.hclk_tns;
+
+        bt->tcah = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tcah_SHIFT);
+        bt->tcoh = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tcoh_SHIFT);
+        bt->tcos = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tcos_SHIFT);
+        bt->tacs = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tacs_SHIFT);
+        bt->tacc = get_tacc(hclk, bankcon >> S3C2410_BANKCON_Tacc_SHIFT);
+}
+
+/**
+ * s3c2410_iotiming_debugfs - debugfs show io bank timing information
+ * @seq: The seq_file to write output to using seq_printf().
+ * @cfg: The current configuration.
+ * @iob: The IO bank information to decode.
+ */
+void s3c2410_iotiming_debugfs(struct seq_file *seq,
+                              struct s3c_cpufreq_config *cfg,
+                              union s3c_iobank *iob)
+{
+        struct s3c2410_iobank_timing *bt = iob->io_2410;
+        unsigned long bankcon = bt->bankcon;
+        unsigned long hclk = cfg->freq.hclk_tns;
+        unsigned int tacs;
+        unsigned int tcos;
+        unsigned int tacc;
+        unsigned int tcoh;
+        unsigned int tcah;
+
+        seq_printf(seq, "BANKCON=0x%08lx\n", bankcon);
+
+        tcah = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tcah_SHIFT);
+        tcoh = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tcoh_SHIFT);
+        tcos = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tcos_SHIFT);
+        tacs = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tacs_SHIFT);
+        tacc = get_tacc(hclk, bankcon >> S3C2410_BANKCON_Tacc_SHIFT);
+
+        seq_printf(seq,
+                   "\tRead: Tacs=%d.%d, Tcos=%d.%d, Tacc=%d.%d, Tcoh=%d.%d, Tcah=%d.%d\n",
+                   print_ns(bt->tacs),
+                   print_ns(bt->tcos),
+                   print_ns(bt->tacc),
+                   print_ns(bt->tcoh),
+                   print_ns(bt->tcah));
+
+        seq_printf(seq,
+                   "\t Set: Tacs=%d.%d, Tcos=%d.%d, Tacc=%d.%d, Tcoh=%d.%d, Tcah=%d.%d\n",
+                   print_ns(tacs),
+                   print_ns(tcos),
+                   print_ns(tacc),
+                   print_ns(tcoh),
+                   print_ns(tcah));
+}
+
+/**
+ * s3c2410_iotiming_calc - Calculate bank timing for frequency change.
+ * @cfg: The frequency configuration
+ * @iot: The IO timing information to fill out.
+ *
+ * Calculate the new values for the banks in @iot based on the new
+ * frequency information in @cfg. This is then used by s3c2410_iotiming_set()
+ * to update the timing when necessary.
+ */
+int s3c2410_iotiming_calc(struct s3c_cpufreq_config *cfg,
+                          struct s3c_iotimings *iot)
+{
+        struct s3c2410_iobank_timing *bt;
+        unsigned long bankcon;
+        int bank;
+        int ret;
+
+        for (bank = 0; bank < MAX_BANKS; bank++) {
+                bankcon = __raw_readl(bank_reg(bank));
+                bt = iot->bank[bank].io_2410;
+
+                if (!bt)
+                        continue;
+
+                bt->bankcon = bankcon;
+
+                ret = s3c2410_calc_bank(cfg, bt);
+                if (ret) {
+                        printk(KERN_ERR "%s: cannot calculate bank %d io\n",
+                               __func__, bank);
+                        goto err;
+                }
+
+                s3c_freq_iodbg("%s: bank %d: con=%08lx\n",
+                               __func__, bank, bt->bankcon);
+        }
+
+        return 0;
+ err:
+        return ret;
+}
+
+/**
+ * s3c2410_iotiming_set - set the IO timings from the given setup.
+ * @cfg: The frequency configuration
+ * @iot: The IO timing information to use.
+ *
+ * Set all the currently used IO bank timing information generated
+ * by s3c2410_iotiming_calc() once the core has validated that all
+ * the new values are within permitted bounds.
+ */
+void s3c2410_iotiming_set(struct s3c_cpufreq_config *cfg,
+                          struct s3c_iotimings *iot)
+{
+        struct s3c2410_iobank_timing *bt;
+        int bank;
+
+        /* set the io timings from the specifier */
+
+        for (bank = 0; bank < MAX_BANKS; bank++) {
+                bt = iot->bank[bank].io_2410;
+                if (!bt)
+                        continue;
+
+                __raw_writel(bt->bankcon, bank_reg(bank));
+        }
+}
+
+/**
+ * s3c2410_iotiming_get - Get the timing information from current registers.
+ * @cfg: The frequency configuration
+ * @timings: The IO timing information to fill out.
+ *
+ * Calculate the @timings timing information from the current frequency
+ * information in @cfg, and the new frequency configur
+ * through all the IO banks, reading the state and then updating @iot
+ * as necessary.
+ *
+ * This is used at the moment on initialisation to get the current
+ * configuration so that boards do not have to carry their own setup
+ * if the timings are correct on initialisation.
+ */
+
+int s3c2410_iotiming_get(struct s3c_cpufreq_config *cfg,
+                         struct s3c_iotimings *timings)
+{
+        struct s3c2410_iobank_timing *bt;
+        unsigned long bankcon;
+        unsigned long bwscon;
+        int bank;
+
+        bwscon = __raw_readl(S3C2410_BWSCON);
+
+        /* look through all banks to see what is currently set. */
+
+        for (bank = 0; bank < MAX_BANKS; bank++) {
+                bankcon = __raw_readl(bank_reg(bank));
+
+                if (!bank_is_io(bankcon))
+                        continue;
+
+                s3c_freq_iodbg("%s: bank %d: con %08lx\n",
+                               __func__, bank, bankcon);
+
+                bt = kzalloc(sizeof(struct s3c2410_iobank_timing), GFP_KERNEL);
+                if (!bt) {
+                        printk(KERN_ERR "%s: no memory for bank\n", __func__);
+                        return -ENOMEM;
+                }
+
+                /* find out in nWait is enabled for bank. */
+
+                if (bank != 0) {
+                        unsigned long tmp  = S3C2410_BWSCON_GET(bwscon, bank);
+                        if (tmp & S3C2410_BWSCON_WS)
+                                bt->nwait_en = 1;
+                }
+
+                timings->bank[bank].io_2410 = bt;
+                bt->bankcon = bankcon;
+
+                s3c2410_iotiming_getbank(cfg, bt);
+        }
+
+        s3c2410_print_timing("get", timings);
+        return 0;
+}
diff --git a/arch/arm/plat-s3c24xx/s3c2412-iotiming.c b/arch/arm/plat-s3c24xx/s3c2412-iotiming.c
new file mode 100644
index 000000000000..fd45e47facbc
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/s3c2412-iotiming.c
@@ -0,0 +1,285 @@
+/* linux/arch/arm/plat-s3c24xx/s3c2412-iotiming.c
+ *
+ * Copyright (c) 2006,2008 Simtec Electronics
+ *      http://armlinux.simtec.co.uk/
+ *      Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2412/S3C2443 (PL093 based) IO timing support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/cpufreq.h>
+#include <linux/seq_file.h>
+#include <linux/sysdev.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+
+#include <linux/amba/pl093.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/regs-s3c2412-mem.h>
+
+#include <plat/cpu.h>
+#include <plat/cpu-freq-core.h>
+#include <plat/clock.h>
+
+#define print_ns(x) ((x) / 10), ((x) % 10)
+
+/**
+ * s3c2412_print_timing - print timing infromation via printk.
+ * @pfx: The prefix to print each line with.
+ * @iot: The IO timing information
+ */
+static void s3c2412_print_timing(const char *pfx, struct s3c_iotimings *iot)
+{
+        struct s3c2412_iobank_timing *bt;
+        unsigned int bank;
+
+        for (bank = 0; bank < MAX_BANKS; bank++) {
+                bt = iot->bank[bank].io_2412;
+                if (!bt)
+                        continue;
+
+                printk(KERN_DEBUG "%s: %d: idcy=%d.%d wstrd=%d.%d wstwr=%d,%d"
+                       "wstoen=%d.%d wstwen=%d.%d wstbrd=%d.%d\n", pfx, bank,
+                       print_ns(bt->idcy),
+                       print_ns(bt->wstrd),
+                       print_ns(bt->wstwr),
+                       print_ns(bt->wstoen),
+                       print_ns(bt->wstwen),
+                       print_ns(bt->wstbrd));
+        }
+}
+
+/**
+ * to_div - turn a cycle length into a divisor setting.
+ * @cyc_tns: The cycle time in 10ths of nanoseconds.
+ * @clk_tns: The clock period in 10ths of nanoseconds.
+ */
+static inline unsigned int to_div(unsigned int cyc_tns, unsigned int clk_tns)
+{
+        return cyc_tns ? DIV_ROUND_UP(cyc_tns, clk_tns) : 0;
+}
+
+/**
+ * calc_timing - calculate timing divisor value and check in range.
+ * @hwtm: The hardware timing in 10ths of nanoseconds.
+ * @clk_tns: The clock period in 10ths of nanoseconds.
+ * @err: Pointer to err variable to update in event of failure.
+ */
+static unsigned int calc_timing(unsigned int hwtm, unsigned int clk_tns,
+                                unsigned int *err)
+{
+        unsigned int ret = to_div(hwtm, clk_tns);
+
+        if (ret > 0xf)
+                *err = -EINVAL;
+
+        return ret;
+}
+
+/**
+ * s3c2412_calc_bank - calculate the bank divisor settings.
+ * @cfg: The current frequency configuration.
+ * @bt: The bank timing.
+ */
+static int s3c2412_calc_bank(struct s3c_cpufreq_config *cfg,
+                             struct s3c2412_iobank_timing *bt)
+{
+        unsigned int hclk = cfg->freq.hclk_tns;
+        int err = 0;
+
+        bt->smbidcyr = calc_timing(bt->idcy, hclk, &err);
+        bt->smbwstrd = calc_timing(bt->wstrd, hclk, &err);
+        bt->smbwstwr = calc_timing(bt->wstwr, hclk, &err);
+        bt->smbwstoen = calc_timing(bt->wstoen, hclk, &err);
+        bt->smbwstwen = calc_timing(bt->wstwen, hclk, &err);
+        bt->smbwstbrd = calc_timing(bt->wstbrd, hclk, &err);
+
+        return err;
+}
+
+/**
+ * s3c2412_iotiming_debugfs - debugfs show io bank timing information
+ * @seq: The seq_file to write output to using seq_printf().
+ * @cfg: The current configuration.
+ * @iob: The IO bank information to decode.
+*/
+void s3c2412_iotiming_debugfs(struct seq_file *seq,
+                              struct s3c_cpufreq_config *cfg,
+                              union s3c_iobank *iob)
+{
+        struct s3c2412_iobank_timing *bt = iob->io_2412;
+
+        seq_printf(seq,
+                   "\tRead: idcy=%d.%d wstrd=%d.%d wstwr=%d,%d"
+                   "wstoen=%d.%d wstwen=%d.%d wstbrd=%d.%d\n",
+                   print_ns(bt->idcy),
+                   print_ns(bt->wstrd),
+                   print_ns(bt->wstwr),
+                   print_ns(bt->wstoen),
+                   print_ns(bt->wstwen),
+                   print_ns(bt->wstbrd));
+}
+
+/**
+ * s3c2412_iotiming_calc - calculate all the bank divisor settings.
+ * @cfg: The current frequency configuration.
+ * @iot: The bank timing information.
+ *
+ * Calculate the timing information for all the banks that are
+ * configured as IO, using s3c2412_calc_bank().
+ */
+int s3c2412_iotiming_calc(struct s3c_cpufreq_config *cfg,
+                          struct s3c_iotimings *iot)
+{
+        struct s3c2412_iobank_timing *bt;
+        int bank;
+        int ret;
+
+        for (bank = 0; bank < MAX_BANKS; bank++) {
+                bt = iot->bank[bank].io_2412;
+                if (!bt)
+                        continue;
+
+                ret = s3c2412_calc_bank(cfg, bt);
+                if (ret) {
+                        printk(KERN_ERR "%s: cannot calculate bank %d io\n",
+                               __func__, bank);
+                        goto err;
+                }
+        }
+
+        return 0;
+ err:
+        return ret;
+}
+
+/**
+ * s3c2412_iotiming_set - set the timing information
+ * @cfg: The current frequency configuration.
+ * @iot: The bank timing information.
+ *
+ * Set the IO bank information from the details calculated earlier from
+ * calling s3c2412_iotiming_calc().
+ */
+void s3c2412_iotiming_set(struct s3c_cpufreq_config *cfg,
+                          struct s3c_iotimings *iot)
+{
+        struct s3c2412_iobank_timing *bt;
+        void __iomem *regs;
+        int bank;
+
+        /* set the io timings from the specifier */
+
+        for (bank = 0; bank < MAX_BANKS; bank++) {
+                bt = iot->bank[bank].io_2412;
+                if (!bt)
+                        continue;
+
+                regs = S3C2412_SSMC_BANK(bank);
+
+                __raw_writel(bt->smbidcyr, regs + SMBIDCYR);
+                __raw_writel(bt->smbwstrd, regs + SMBWSTRDR);
+                __raw_writel(bt->smbwstwr, regs + SMBWSTWRR);
+                __raw_writel(bt->smbwstoen, regs + SMBWSTOENR);
+                __raw_writel(bt->smbwstwen, regs + SMBWSTWENR);
+                __raw_writel(bt->smbwstbrd, regs + SMBWSTBRDR);
+        }
+}
+
+static inline unsigned int s3c2412_decode_timing(unsigned int clock, u32 reg)
+{
+        return (reg & 0xf) * clock;
+}
+
+static void s3c2412_iotiming_getbank(struct s3c_cpufreq_config *cfg,
+                                     struct s3c2412_iobank_timing *bt,
+                                     unsigned int bank)
+{
+        unsigned long clk = cfg->freq.hclk_tns;  /* ssmc clock??? */
+        void __iomem *regs = S3C2412_SSMC_BANK(bank);
+
+        bt->idcy = s3c2412_decode_timing(clk, __raw_readl(regs + SMBIDCYR));
+        bt->wstrd = s3c2412_decode_timing(clk, __raw_readl(regs + SMBWSTRDR));
+        bt->wstoen = s3c2412_decode_timing(clk, __raw_readl(regs + SMBWSTOENR));
+        bt->wstwen = s3c2412_decode_timing(clk, __raw_readl(regs + SMBWSTWENR));
+        bt->wstbrd = s3c2412_decode_timing(clk, __raw_readl(regs + SMBWSTBRDR));
+}
+
+/**
+ * bank_is_io - return true if bank is (possibly) IO.
+ * @bank: The bank number.
+ * @bankcfg: The value of S3C2412_EBI_BANKCFG.
+ */
+static inline bool bank_is_io(unsigned int bank, u32 bankcfg)
+{
+        if (bank < 2)
+                return true;
+
+        return !(bankcfg & (1 << bank));
+}
+
+int s3c2412_iotiming_get(struct s3c_cpufreq_config *cfg,
+                         struct s3c_iotimings *timings)
+{
+        struct s3c2412_iobank_timing *bt;
+        u32 bankcfg = __raw_readl(S3C2412_EBI_BANKCFG);
+        unsigned int bank;
+
+        /* look through all banks to see what is currently set. */
+
+        for (bank = 0; bank < MAX_BANKS; bank++) {
+                if (!bank_is_io(bank, bankcfg))
+                        continue;
+
+                bt = kzalloc(sizeof(struct s3c2412_iobank_timing), GFP_KERNEL);
+                if (!bt) {
+                        printk(KERN_ERR "%s: no memory for bank\n", __func__);
+                        return -ENOMEM;
+                }
+
+                timings->bank[bank].io_2412 = bt;
+                s3c2412_iotiming_getbank(cfg, bt, bank);
+        }
+
+        s3c2412_print_timing("get", timings);
+        return 0;
+}
+
+/* this is in here as it is so small, it doesn't currently warrant a file
+ * to itself. We expect that any s3c24xx needing this is going to also
+ * need the iotiming support.
+ */
+void s3c2412_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg)
+{
+        struct s3c_cpufreq_board *board = cfg->board;
+        u32 refresh;
+
+        WARN_ON(board == NULL);
+
+        /* Reduce both the refresh time (in ns) and the frequency (in MHz)
+         * down to ensure that we do not overflow 32 bit numbers.
+         *
+         * This should work for HCLK up to 133MHz and refresh period up
+         * to 30usec.
+         */
+
+        refresh = (cfg->freq.hclk / 100) * (board->refresh / 10);
+        refresh = DIV_ROUND_UP(refresh, (1000 * 1000)); /* apply scale  */
+        refresh &= ((1 << 16) - 1);
+
+        s3c_freq_dbg("%s: refresh value %u\n", __func__, (unsigned int)refresh);
+
+        __raw_writel(refresh, S3C2412_REFRESH);
+}
diff --git a/arch/arm/plat-s3c24xx/s3c2440-cpufreq.c b/arch/arm/plat-s3c24xx/s3c2440-cpufreq.c
new file mode 100644
index 000000000000..ae2e6c604f27
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/s3c2440-cpufreq.c
@@ -0,0 +1,311 @@
+/* linux/arch/arm/plat-s3c24xx/s3c2440-cpufreq.c
+ *
+ * Copyright (c) 2006,2008,2009 Simtec Electronics
+ *      http://armlinux.simtec.co.uk/
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      Vincent Sanders <vince@simtec.co.uk>
+ *
+ * S3C2440/S3C2442 CPU Frequency scaling
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/cpufreq.h>
+#include <linux/sysdev.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/regs-clock.h>
+
+#include <plat/cpu.h>
+#include <plat/cpu-freq-core.h>
+#include <plat/clock.h>
+
+static struct clk *xtal;
+static struct clk *fclk;
+static struct clk *hclk;
+static struct clk *armclk;
+
+/* HDIV: 1, 2, 3, 4, 6, 8 */
+
+static inline int within_khz(unsigned long a, unsigned long b)
+{
+        long diff = a - b;
+
+        return (diff >= -1000 && diff <= 1000);
+}
+
+/**
+ * s3c2440_cpufreq_calcdivs - calculate divider settings
+ * @cfg: The cpu frequency settings.
+ *
+ * Calcualte the divider values for the given frequency settings
+ * specified in @cfg. The values are stored in @cfg for later use
+ * by the relevant set routine if the request settings can be reached.
+ */
+int s3c2440_cpufreq_calcdivs(struct s3c_cpufreq_config *cfg)
+{
+        unsigned int hdiv, pdiv;
+        unsigned long hclk, fclk, armclk;
+        unsigned long hclk_max;
+
+        fclk = cfg->freq.fclk;
+        armclk = cfg->freq.armclk;
+        hclk_max = cfg->max.hclk;
+
+        s3c_freq_dbg("%s: fclk is %lu, armclk %lu, max hclk %lu\n",
+                     __func__, fclk, armclk, hclk_max);
+
+        if (armclk > fclk) {
+                printk(KERN_WARNING "%s: armclk > fclk\n", __func__);
+                armclk = fclk;
+        }
+
+        /* if we are in DVS, we need HCLK to be <= ARMCLK */
+        if (armclk < fclk && armclk < hclk_max)
+                hclk_max = armclk;
+
+        for (hdiv = 1; hdiv < 9; hdiv++) {
+                if (hdiv == 5 || hdiv == 7)
+                        hdiv++;
+
+                hclk = (fclk / hdiv);
+                if (hclk <= hclk_max || within_khz(hclk, hclk_max))
+                        break;
+        }
+
+        s3c_freq_dbg("%s: hclk %lu, div %d\n", __func__, hclk, hdiv);
+
+        if (hdiv > 8)
+                goto invalid;
+
+        pdiv = (hclk > cfg->max.pclk) ? 2 : 1;
+
+        if ((hclk / pdiv) > cfg->max.pclk)
+                pdiv++;
+
+        s3c_freq_dbg("%s: pdiv %d\n", __func__, pdiv);
+
+        if (pdiv > 2)
+                goto invalid;
+
+        pdiv *= hdiv;
+
+        /* calculate a valid armclk */
+
+        if (armclk < hclk)
+                armclk = hclk;
+
+        /* if we're running armclk lower than fclk, this really means
+         * that the system should go into dvs mode, which means that
+         * armclk is connected to hclk. */
+        if (armclk < fclk) {
+                cfg->divs.dvs = 1;
+                armclk = hclk;
+        } else
+                cfg->divs.dvs = 0;
+
+        cfg->freq.armclk = armclk;
+
+        /* store the result, and then return */
+
+        cfg->divs.h_divisor = hdiv;
+        cfg->divs.p_divisor = pdiv;
+
+        return 0;
+
+ invalid:
+        return -EINVAL;
+}
+
+#define CAMDIVN_HCLK_HALF (S3C2440_CAMDIVN_HCLK3_HALF | \
+                           S3C2440_CAMDIVN_HCLK4_HALF)
+
+/**
+ * s3c2440_cpufreq_setdivs - set the cpu frequency divider settings
+ * @cfg: The cpu frequency settings.
+ *
+ * Set the divisors from the settings in @cfg, which where generated
+ * during the calculation phase by s3c2440_cpufreq_calcdivs().
+ */
+static void s3c2440_cpufreq_setdivs(struct s3c_cpufreq_config *cfg)
+{
+        unsigned long clkdiv, camdiv;
+
+        s3c_freq_dbg("%s: divsiors: h=%d, p=%d\n", __func__,
+                     cfg->divs.h_divisor, cfg->divs.p_divisor);
+
+        clkdiv = __raw_readl(S3C2410_CLKDIVN);
+        camdiv = __raw_readl(S3C2440_CAMDIVN);
+
+        clkdiv &= ~(S3C2440_CLKDIVN_HDIVN_MASK | S3C2440_CLKDIVN_PDIVN);
+        camdiv &= ~CAMDIVN_HCLK_HALF;
+
+        switch (cfg->divs.h_divisor) {
+        case 1:
+                clkdiv |= S3C2440_CLKDIVN_HDIVN_1;
+                break;
+
+        case 2:
+                clkdiv |= S3C2440_CLKDIVN_HDIVN_2;
+                break;
+
+        case 6:
+                camdiv |= S3C2440_CAMDIVN_HCLK3_HALF;
+        case 3:
+                clkdiv |= S3C2440_CLKDIVN_HDIVN_3_6;
+                break;
+
+        case 8:
+                camdiv |= S3C2440_CAMDIVN_HCLK4_HALF;
+        case 4:
+                clkdiv |= S3C2440_CLKDIVN_HDIVN_4_8;
+                break;
+
+        default:
+                BUG();  /* we don't expect to get here. */
+        }
+
+        if (cfg->divs.p_divisor != cfg->divs.h_divisor)
+                clkdiv |= S3C2440_CLKDIVN_PDIVN;
+
+        /* todo - set pclk. */
+
+        /* Write the divisors first with hclk intentionally halved so that
+         * when we write clkdiv we will under-frequency instead of over. We
+         * then make a short delay and remove the hclk halving if necessary.
+         */
+
+        __raw_writel(camdiv | CAMDIVN_HCLK_HALF, S3C2440_CAMDIVN);
+        __raw_writel(clkdiv, S3C2410_CLKDIVN);
+
+        ndelay(20);
+        __raw_writel(camdiv, S3C2440_CAMDIVN);
+
+        clk_set_parent(armclk, cfg->divs.dvs ? hclk : fclk);
+}
+
+static int run_freq_for(unsigned long max_hclk, unsigned long fclk,
+                        int *divs,
+                        struct cpufreq_frequency_table *table,
+                        size_t table_size)
+{
+        unsigned long freq;
+        int index = 0;
+        int div;
+
+        for (div = *divs; div > 0; div = *divs++) {
+                freq = fclk / div;
+
+                if (freq > max_hclk && div != 1)
+                        continue;
+
+                freq /= 1000; /* table is in kHz */
+                index = s3c_cpufreq_addfreq(table, index, table_size, freq);
+                if (index < 0)
+                        break;
+        }
+
+        return index;
+}
+
+static int hclk_divs[] = { 1, 2, 3, 4, 6, 8, -1 };
+
+static int s3c2440_cpufreq_calctable(struct s3c_cpufreq_config *cfg,
+                                     struct cpufreq_frequency_table *table,
+                                     size_t table_size)
+{
+        int ret;
+
+        WARN_ON(cfg->info == NULL);
+        WARN_ON(cfg->board == NULL);
+
+        ret = run_freq_for(cfg->info->max.hclk,
+                           cfg->info->max.fclk,
+                           hclk_divs,
+                           table, table_size);
+
+        s3c_freq_dbg("%s: returning %d\n", __func__, ret);
+
+        return ret;
+}
+
+struct s3c_cpufreq_info s3c2440_cpufreq_info = {
+        .max            = {
+                .fclk   = 400000000,
+                .hclk   = 133333333,
+                .pclk   =  66666666,
+        },
+
+        .locktime_m     = 300,
+        .locktime_u     = 300,
+        .locktime_bits  = 16,
+
+        .name           = "s3c244x",
+        .calc_iotiming  = s3c2410_iotiming_calc,
+        .set_iotiming   = s3c2410_iotiming_set,
+        .get_iotiming   = s3c2410_iotiming_get,
+        .set_fvco       = s3c2410_set_fvco,
+
+        .set_refresh    = s3c2410_cpufreq_setrefresh,
+        .set_divs       = s3c2440_cpufreq_setdivs,
+        .calc_divs      = s3c2440_cpufreq_calcdivs,
+        .calc_freqtable = s3c2440_cpufreq_calctable,
+
+        .resume_clocks  = s3c244x_setup_clocks,
+
+        .debug_io_show  = s3c_cpufreq_debugfs_call(s3c2410_iotiming_debugfs),
+};
+
+static int s3c2440_cpufreq_add(struct sys_device *sysdev)
+{
+        xtal = s3c_cpufreq_clk_get(NULL, "xtal");
+        hclk = s3c_cpufreq_clk_get(NULL, "hclk");
+        fclk = s3c_cpufreq_clk_get(NULL, "fclk");
+        armclk = s3c_cpufreq_clk_get(NULL, "armclk");
+
+        if (IS_ERR(xtal) || IS_ERR(hclk) || IS_ERR(fclk) || IS_ERR(armclk)) {
+                printk(KERN_ERR "%s: failed to get clocks\n", __func__);
+                return -ENOENT;
+        }
+
+        return s3c_cpufreq_register(&s3c2440_cpufreq_info);
+}
+
+static struct sysdev_driver s3c2440_cpufreq_driver = {
+        .add            = s3c2440_cpufreq_add,
+};
+
+static int s3c2440_cpufreq_init(void)
+{
+        return sysdev_driver_register(&s3c2440_sysclass,
+                                      &s3c2440_cpufreq_driver);
+}
+
+/* arch_initcall adds the clocks we need, so use subsys_initcall. */
+subsys_initcall(s3c2440_cpufreq_init);
+
+static struct sysdev_driver s3c2442_cpufreq_driver = {
+        .add            = s3c2440_cpufreq_add,
+};
+
+static int s3c2442_cpufreq_init(void)
+{
+        return sysdev_driver_register(&s3c2442_sysclass,
+                                      &s3c2442_cpufreq_driver);
+}
+
+subsys_initcall(s3c2442_cpufreq_init);
diff --git a/arch/arm/plat-s3c24xx/s3c2440-pll-12000000.c b/arch/arm/plat-s3c24xx/s3c2440-pll-12000000.c
new file mode 100644
index 000000000000..ff9443b233aa
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/s3c2440-pll-12000000.c
@@ -0,0 +1,97 @@
+/* arch/arm/plat-s3c24xx/s3c2440-pll-12000000.c
+ *
+ * Copyright (c) 2006,2007 Simtec Electronics
+ *      http://armlinux.simtec.co.uk/
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      Vincent Sanders <vince@arm.linux.org.uk>
+ *
+ * S3C2440/S3C2442 CPU PLL tables (12MHz Crystal)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/sysdev.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+
+#include <plat/cpu.h>
+#include <plat/cpu-freq-core.h>
+
+static struct cpufreq_frequency_table s3c2440_plls_12[] __initdata = {
+        { .frequency = 75000000,        .index = PLLVAL(0x75, 3, 3),  },        /* FVco 600.000000 */
+        { .frequency = 80000000,        .index = PLLVAL(0x98, 4, 3),  },        /* FVco 640.000000 */
+        { .frequency = 90000000,        .index = PLLVAL(0x70, 2, 3),  },        /* FVco 720.000000 */
+        { .frequency = 100000000,       .index = PLLVAL(0x5c, 1, 3),  },        /* FVco 800.000000 */
+        { .frequency = 110000000,       .index = PLLVAL(0x66, 1, 3),  },        /* FVco 880.000000 */
+        { .frequency = 120000000,       .index = PLLVAL(0x70, 1, 3),  },        /* FVco 960.000000 */
+        { .frequency = 150000000,       .index = PLLVAL(0x75, 3, 2),  },        /* FVco 600.000000 */
+        { .frequency = 160000000,       .index = PLLVAL(0x98, 4, 2),  },        /* FVco 640.000000 */
+        { .frequency = 170000000,       .index = PLLVAL(0x4d, 1, 2),  },        /* FVco 680.000000 */
+        { .frequency = 180000000,       .index = PLLVAL(0x70, 2, 2),  },        /* FVco 720.000000 */
+        { .frequency = 190000000,       .index = PLLVAL(0x57, 1, 2),  },        /* FVco 760.000000 */
+        { .frequency = 200000000,       .index = PLLVAL(0x5c, 1, 2),  },        /* FVco 800.000000 */
+        { .frequency = 210000000,       .index = PLLVAL(0x84, 2, 2),  },        /* FVco 840.000000 */
+        { .frequency = 220000000,       .index = PLLVAL(0x66, 1, 2),  },        /* FVco 880.000000 */
+        { .frequency = 230000000,       .index = PLLVAL(0x6b, 1, 2),  },        /* FVco 920.000000 */
+        { .frequency = 240000000,       .index = PLLVAL(0x70, 1, 2),  },        /* FVco 960.000000 */
+        { .frequency = 300000000,       .index = PLLVAL(0x75, 3, 1),  },        /* FVco 600.000000 */
+        { .frequency = 310000000,       .index = PLLVAL(0x93, 4, 1),  },        /* FVco 620.000000 */
+        { .frequency = 320000000,       .index = PLLVAL(0x98, 4, 1),  },        /* FVco 640.000000 */
+        { .frequency = 330000000,       .index = PLLVAL(0x66, 2, 1),  },        /* FVco 660.000000 */
+        { .frequency = 340000000,       .index = PLLVAL(0x4d, 1, 1),  },        /* FVco 680.000000 */
+        { .frequency = 350000000,       .index = PLLVAL(0xa7, 4, 1),  },        /* FVco 700.000000 */
+        { .frequency = 360000000,       .index = PLLVAL(0x70, 2, 1),  },        /* FVco 720.000000 */
+        { .frequency = 370000000,       .index = PLLVAL(0xb1, 4, 1),  },        /* FVco 740.000000 */
+        { .frequency = 380000000,       .index = PLLVAL(0x57, 1, 1),  },        /* FVco 760.000000 */
+        { .frequency = 390000000,       .index = PLLVAL(0x7a, 2, 1),  },        /* FVco 780.000000 */
+        { .frequency = 400000000,       .index = PLLVAL(0x5c, 1, 1),  },        /* FVco 800.000000 */
+};
+
+static int s3c2440_plls12_add(struct sys_device *dev)
+{
+        struct clk *xtal_clk;
+        unsigned long xtal;
+
+        xtal_clk = clk_get(NULL, "xtal");
+        if (IS_ERR(xtal_clk))
+                return PTR_ERR(xtal_clk);
+
+        xtal = clk_get_rate(xtal_clk);
+        clk_put(xtal_clk);
+
+        if (xtal == 12000000) {
+                printk(KERN_INFO "Using PLL table for 12MHz crystal\n");
+                return s3c_plltab_register(s3c2440_plls_12,
+                                           ARRAY_SIZE(s3c2440_plls_12));
+        }
+
+        return 0;
+}
+
+static struct sysdev_driver s3c2440_plls12_drv = {
+        .add    = s3c2440_plls12_add,
+};
+
+static int __init s3c2440_pll_12mhz(void)
+{
+        return sysdev_driver_register(&s3c2440_sysclass, &s3c2440_plls12_drv);
+
+}
+
+arch_initcall(s3c2440_pll_12mhz);
+
+static struct sysdev_driver s3c2442_plls12_drv = {
+        .add    = s3c2440_plls12_add,
+};
+
+static int __init s3c2442_pll_12mhz(void)
+{
+        return sysdev_driver_register(&s3c2442_sysclass, &s3c2442_plls12_drv);
+
+}
+
+arch_initcall(s3c2442_pll_12mhz);
diff --git a/arch/arm/plat-s3c24xx/s3c2440-pll-16934400.c b/arch/arm/plat-s3c24xx/s3c2440-pll-16934400.c
new file mode 100644
index 000000000000..7679af13a94d
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/s3c2440-pll-16934400.c
@@ -0,0 +1,127 @@
+/* arch/arm/plat-s3c24xx/s3c2440-pll-16934400.c
+ *
+ * Copyright (c) 2006-2008 Simtec Electronics
+ *      http://armlinux.simtec.co.uk/
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      Vincent Sanders <vince@arm.linux.org.uk>
+ *
+ * S3C2440/S3C2442 CPU PLL tables (16.93444MHz Crystal)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/sysdev.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+
+#include <plat/cpu.h>
+#include <plat/cpu-freq-core.h>
+
+static struct cpufreq_frequency_table s3c2440_plls_169344[] __initdata = {
+        { .frequency = 78019200,        .index = PLLVAL(121, 5, 3),     },      /* FVco 624.153600 */
+        { .frequency = 84067200,        .index = PLLVAL(131, 5, 3),     },      /* FVco 672.537600 */
+        { .frequency = 90115200,        .index = PLLVAL(141, 5, 3),     },      /* FVco 720.921600 */
+        { .frequency = 96163200,        .index = PLLVAL(151, 5, 3),     },      /* FVco 769.305600 */
+        { .frequency = 102135600,       .index = PLLVAL(185, 6, 3),     },      /* FVco 817.084800 */
+        { .frequency = 108259200,       .index = PLLVAL(171, 5, 3),     },      /* FVco 866.073600 */
+        { .frequency = 114307200,       .index = PLLVAL(127, 3, 3),     },      /* FVco 914.457600 */
+        { .frequency = 120234240,       .index = PLLVAL(134, 3, 3),     },      /* FVco 961.873920 */
+        { .frequency = 126161280,       .index = PLLVAL(141, 3, 3),     },      /* FVco 1009.290240 */
+        { .frequency = 132088320,       .index = PLLVAL(148, 3, 3),     },      /* FVco 1056.706560 */
+        { .frequency = 138015360,       .index = PLLVAL(155, 3, 3),     },      /* FVco 1104.122880 */
+        { .frequency = 144789120,       .index = PLLVAL(163, 3, 3),     },      /* FVco 1158.312960 */
+        { .frequency = 150100363,       .index = PLLVAL(187, 9, 2),     },      /* FVco 600.401454 */
+        { .frequency = 156038400,       .index = PLLVAL(121, 5, 2),     },      /* FVco 624.153600 */
+        { .frequency = 162086400,       .index = PLLVAL(126, 5, 2),     },      /* FVco 648.345600 */
+        { .frequency = 168134400,       .index = PLLVAL(131, 5, 2),     },      /* FVco 672.537600 */
+        { .frequency = 174048000,       .index = PLLVAL(177, 7, 2),     },      /* FVco 696.192000 */
+        { .frequency = 180230400,       .index = PLLVAL(141, 5, 2),     },      /* FVco 720.921600 */
+        { .frequency = 186278400,       .index = PLLVAL(124, 4, 2),     },      /* FVco 745.113600 */
+        { .frequency = 192326400,       .index = PLLVAL(151, 5, 2),     },      /* FVco 769.305600 */
+        { .frequency = 198132480,       .index = PLLVAL(109, 3, 2),     },      /* FVco 792.529920 */
+        { .frequency = 204271200,       .index = PLLVAL(185, 6, 2),     },      /* FVco 817.084800 */
+        { .frequency = 210268800,       .index = PLLVAL(141, 4, 2),     },      /* FVco 841.075200 */
+        { .frequency = 216518400,       .index = PLLVAL(171, 5, 2),     },      /* FVco 866.073600 */
+        { .frequency = 222264000,       .index = PLLVAL(97, 2, 2),      },      /* FVco 889.056000 */
+        { .frequency = 228614400,       .index = PLLVAL(127, 3, 2),     },      /* FVco 914.457600 */
+        { .frequency = 234259200,       .index = PLLVAL(158, 4, 2),     },      /* FVco 937.036800 */
+        { .frequency = 240468480,       .index = PLLVAL(134, 3, 2),     },      /* FVco 961.873920 */
+        { .frequency = 246960000,       .index = PLLVAL(167, 4, 2),     },      /* FVco 987.840000 */
+        { .frequency = 252322560,       .index = PLLVAL(141, 3, 2),     },      /* FVco 1009.290240 */
+        { .frequency = 258249600,       .index = PLLVAL(114, 2, 2),     },      /* FVco 1032.998400 */
+        { .frequency = 264176640,       .index = PLLVAL(148, 3, 2),     },      /* FVco 1056.706560 */
+        { .frequency = 270950400,       .index = PLLVAL(120, 2, 2),     },      /* FVco 1083.801600 */
+        { .frequency = 276030720,       .index = PLLVAL(155, 3, 2),     },      /* FVco 1104.122880 */
+        { .frequency = 282240000,       .index = PLLVAL(92, 1, 2),      },      /* FVco 1128.960000 */
+        { .frequency = 289578240,       .index = PLLVAL(163, 3, 2),     },      /* FVco 1158.312960 */
+        { .frequency = 294235200,       .index = PLLVAL(131, 2, 2),     },      /* FVco 1176.940800 */
+        { .frequency = 300200727,       .index = PLLVAL(187, 9, 1),     },      /* FVco 600.401454 */
+        { .frequency = 306358690,       .index = PLLVAL(191, 9, 1),     },      /* FVco 612.717380 */
+        { .frequency = 312076800,       .index = PLLVAL(121, 5, 1),     },      /* FVco 624.153600 */
+        { .frequency = 318366720,       .index = PLLVAL(86, 3, 1),      },      /* FVco 636.733440 */
+        { .frequency = 324172800,       .index = PLLVAL(126, 5, 1),     },      /* FVco 648.345600 */
+        { .frequency = 330220800,       .index = PLLVAL(109, 4, 1),     },      /* FVco 660.441600 */
+        { .frequency = 336268800,       .index = PLLVAL(131, 5, 1),     },      /* FVco 672.537600 */
+        { .frequency = 342074880,       .index = PLLVAL(93, 3, 1),      },      /* FVco 684.149760 */
+        { .frequency = 348096000,       .index = PLLVAL(177, 7, 1),     },      /* FVco 696.192000 */
+        { .frequency = 355622400,       .index = PLLVAL(118, 4, 1),     },      /* FVco 711.244800 */
+        { .frequency = 360460800,       .index = PLLVAL(141, 5, 1),     },      /* FVco 720.921600 */
+        { .frequency = 366206400,       .index = PLLVAL(165, 6, 1),     },      /* FVco 732.412800 */
+        { .frequency = 372556800,       .index = PLLVAL(124, 4, 1),     },      /* FVco 745.113600 */
+        { .frequency = 378201600,       .index = PLLVAL(126, 4, 1),     },      /* FVco 756.403200 */
+        { .frequency = 384652800,       .index = PLLVAL(151, 5, 1),     },      /* FVco 769.305600 */
+        { .frequency = 391608000,       .index = PLLVAL(177, 6, 1),     },      /* FVco 783.216000 */
+        { .frequency = 396264960,       .index = PLLVAL(109, 3, 1),     },      /* FVco 792.529920 */
+        { .frequency = 402192000,       .index = PLLVAL(87, 2, 1),      },      /* FVco 804.384000 */
+};
+
+static int s3c2440_plls169344_add(struct sys_device *dev)
+{
+        struct clk *xtal_clk;
+        unsigned long xtal;
+
+        xtal_clk = clk_get(NULL, "xtal");
+        if (IS_ERR(xtal_clk))
+                return PTR_ERR(xtal_clk);
+
+        xtal = clk_get_rate(xtal_clk);
+        clk_put(xtal_clk);
+
+        if (xtal == 169344000) {
+                printk(KERN_INFO "Using PLL table for 16.9344MHz crystal\n");
+                return s3c_plltab_register(s3c2440_plls_169344,
+                                           ARRAY_SIZE(s3c2440_plls_169344));
+        }
+
+        return 0;
+}
+
+static struct sysdev_driver s3c2440_plls169344_drv = {
+        .add    = s3c2440_plls169344_add,
+};
+
+static int __init s3c2440_pll_16934400(void)
+{
+        return sysdev_driver_register(&s3c2440_sysclass,
+                                      &s3c2440_plls169344_drv);
+
+}
+
+arch_initcall(s3c2440_pll_16934400);
+
+static struct sysdev_driver s3c2442_plls169344_drv = {
+        .add    = s3c2440_plls169344_add,
+};
+
+static int __init s3c2442_pll_16934400(void)
+{
+        return sysdev_driver_register(&s3c2442_sysclass,
+                                      &s3c2442_plls169344_drv);
+
+}
+
+arch_initcall(s3c2442_pll_16934400);
diff --git a/arch/arm/plat-s3c24xx/spi-bus1-gpd8_9_10.c b/arch/arm/plat-s3c24xx/spi-bus1-gpd8_9_10.c
new file mode 100644
index 000000000000..89fcf5308cf6
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/spi-bus1-gpd8_9_10.c
@@ -0,0 +1,38 @@
+/* linux/arch/arm/plat-s3c24xx/spi-bus0-gpd8_9_10.c
+ *
+ * Copyright (c) 2008 Simtec Electronics
+ *      http://armlinux.simtec.co.uk/
+ *      Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C24XX SPI - gpio configuration for bus 1 on gpd8,9,10
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License.
+*/
+
+#include <linux/kernel.h>
+#include <linux/gpio.h>
+
+#include <mach/spi.h>
+#include <mach/regs-gpio.h>
+
+void s3c24xx_spi_gpiocfg_bus1_gpd8_9_10(struct s3c2410_spi_info *spi,
+                                        int enable)
+{
+
+        printk(KERN_INFO "%s(%d)\n", __func__, enable);
+        if (enable) {
+                s3c2410_gpio_cfgpin(S3C2410_GPD(10), S3C2440_GPD10_SPICLK1);
+                s3c2410_gpio_cfgpin(S3C2410_GPD(9), S3C2440_GPD9_SPIMOSI1);
+                s3c2410_gpio_cfgpin(S3C2410_GPD(8), S3C2440_GPD8_SPIMISO1);
+                s3c2410_gpio_pullup(S3C2410_GPD(10), 0);
+                s3c2410_gpio_pullup(S3C2410_GPD(9), 0);
+        } else {
+                s3c2410_gpio_cfgpin(S3C2410_GPD(8), S3C2410_GPIO_INPUT);
+                s3c2410_gpio_cfgpin(S3C2410_GPD(9), S3C2410_GPIO_INPUT);
+                s3c2410_gpio_pullup(S3C2410_GPD(10), 1);
+                s3c2410_gpio_pullup(S3C2410_GPD(9), 1);
+                s3c2410_gpio_pullup(S3C2410_GPD(8), 1);
+        }
+}
diff --git a/arch/arm/plat-s3c64xx/Kconfig b/arch/arm/plat-s3c64xx/Kconfig
index 5ebd8b425a54..bcfa778614d8 100644
--- a/arch/arm/plat-s3c64xx/Kconfig
+++ b/arch/arm/plat-s3c64xx/Kconfig
@@ -19,6 +19,7 @@ config PLAT_S3C64XX
         select S3C_GPIO_PULL_UPDOWN
         select S3C_GPIO_CFG_S3C24XX
         select S3C_GPIO_CFG_S3C64XX
+        select S3C_DEV_NAND
         select USB_ARCH_HAS_OHCI
         help
           Base platform code for any Samsung S3C64XX device
diff --git a/arch/arm/plat-s3c64xx/Makefile b/arch/arm/plat-s3c64xx/Makefile
index 3c8882cd6268..b85b4359e935 100644
--- a/arch/arm/plat-s3c64xx/Makefile
+++ b/arch/arm/plat-s3c64xx/Makefile
@@ -40,4 +40,5 @@ obj-$(CONFIG_S3C64XX_DMA)	+= dma.o
 obj-$(CONFIG_S3C64XX_SETUP_I2C0) += setup-i2c0.o
 obj-$(CONFIG_S3C64XX_SETUP_I2C1) += setup-i2c1.o
 obj-$(CONFIG_S3C64XX_SETUP_FB_24BPP) += setup-fb-24bpp.o
-obj-$(CONFIG_S3C64XX_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o
\ No newline at end of file
+obj-$(CONFIG_S3C64XX_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o
+obj-$(CONFIG_SND_S3C24XX_SOC) += dev-audio.o
diff --git a/arch/arm/plat-s3c/dev-audio.c b/arch/arm/plat-s3c64xx/dev-audio.c
index 1322beb40dd7..1322beb40dd7 100644
--- a/arch/arm/plat-s3c/dev-audio.c
+++ b/arch/arm/plat-s3c64xx/dev-audio.c
diff --git a/arch/arm/plat-s3c64xx/s3c6400-clock.c b/arch/arm/plat-s3c64xx/s3c6400-clock.c
index 1debc1f9f987..febac1950d8e 100644
--- a/arch/arm/plat-s3c64xx/s3c6400-clock.c
+++ b/arch/arm/plat-s3c64xx/s3c6400-clock.c
@@ -153,7 +153,7 @@ static unsigned long s3c64xx_clk_arm_round_rate(struct clk *clk,
         u32 div;
 
         if (parent < rate)
-                return rate;
+                return parent;
 
         div = (parent / rate) - 1;
         if (div > armclk_mask)
@@ -175,7 +175,7 @@ static int s3c64xx_clk_arm_set_rate(struct clk *clk, unsigned long rate)
         div = clk_get_rate(clk->parent) / rate;
 
         val = __raw_readl(S3C_CLK_DIV0);
-        val &= armclk_mask;
+        val &= ~armclk_mask;
         val |= (div - 1);
         __raw_writel(val, S3C_CLK_DIV0);
 
diff --git a/arch/arm/plat-s5pc1xx/Kconfig b/arch/arm/plat-s5pc1xx/Kconfig
new file mode 100644
index 000000000000..a8a711c3c064
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/Kconfig
@@ -0,0 +1,50 @@
+# arch/arm/plat-s5pc1xx/Kconfig
+#
+# Copyright 2009 Samsung Electronics Co.
+#       Byungho Min <bhmin@samsung.com>
+#
+# Licensed under GPLv2
+
+config PLAT_S5PC1XX
+        bool
+        depends on ARCH_S5PC1XX
+        default y
+        select PLAT_S3C
+        select ARM_VIC
+        select NO_IOPORT
+        select ARCH_REQUIRE_GPIOLIB
+        select S3C_GPIO_TRACK
+        select S3C_GPIO_PULL_UPDOWN
+        help
+          Base platform code for any Samsung S5PC1XX device
+
+if PLAT_S5PC1XX
+
+# Configuration options shared by all S3C64XX implementations
+
+config CPU_S5PC100_INIT
+        bool
+        help
+          Common initialisation code for the S5PC1XX
+
+config CPU_S5PC100_CLOCK
+        bool
+        help
+          Common clock support code for the S5PC1XX
+
+# platform specific device setup
+
+config S5PC100_SETUP_I2C0
+        bool
+        default y
+        help
+          Common setup code for i2c bus 0.
+
+          Note, currently since i2c0 is always compiled, this setup helper
+          is always compiled with it.
+
+config S5PC100_SETUP_I2C1
+        bool
+        help
+          Common setup code for i2c bus 1.
+endif
diff --git a/arch/arm/plat-s5pc1xx/Makefile b/arch/arm/plat-s5pc1xx/Makefile
new file mode 100644
index 000000000000..f1ecb2c37ee2
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/Makefile
@@ -0,0 +1,26 @@
+# arch/arm/plat-s5pc1xx/Makefile
+#
+# Copyright 2009 Samsung Electronics Co.
+#
+# Licensed under GPLv2
+
+obj-y                           :=
+obj-m                           :=
+obj-n                           := dummy.o
+obj-                            :=
+
+# Core files
+
+obj-y                           += dev-uart.o
+obj-y                           += cpu.o
+obj-y                           += irq.o
+
+# CPU support
+
+obj-$(CONFIG_CPU_S5PC100_INIT)  += s5pc100-init.o
+obj-$(CONFIG_CPU_S5PC100_CLOCK) += s5pc100-clock.o
+
+# Device setup
+
+obj-$(CONFIG_S5PC100_SETUP_I2C0) += setup-i2c0.o
+obj-$(CONFIG_S5PC100_SETUP_I2C1) += setup-i2c1.o
diff --git a/arch/arm/plat-s5pc1xx/cpu.c b/arch/arm/plat-s5pc1xx/cpu.c
new file mode 100644
index 000000000000..715a7330794d
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/cpu.c
@@ -0,0 +1,112 @@
+/* linux/arch/arm/plat-s5pc1xx/cpu.c
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *      Byungho Min <bhmin@samsung.com>
+ *
+ * S5PC1XX CPU Support
+ *
+ * Based on plat-s3c64xx/cpu.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+#include <mach/map.h>
+
+#include <asm/mach/map.h>
+
+#include <plat/regs-serial.h>
+
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/clock.h>
+
+#include <plat/s5pc100.h>
+
+/* table of supported CPUs */
+
+static const char name_s5pc100[] = "S5PC100";
+
+static struct cpu_table cpu_ids[] __initdata = {
+        {
+                .idcode         = 0x43100000,
+                .idmask         = 0xfffff000,
+                .map_io         = s5pc100_map_io,
+                .init_clocks    = s5pc100_init_clocks,
+                .init_uarts     = s5pc100_init_uarts,
+                .init           = s5pc100_init,
+                .name           = name_s5pc100,
+        },
+};
+/* minimal IO mapping */
+
+/* see notes on uart map in arch/arm/mach-s5pc100/include/mach/debug-macro.S */
+#define UART_OFFS (S3C_PA_UART & 0xffff)
+
+static struct map_desc s5pc1xx_iodesc[] __initdata = {
+        {
+                .virtual        = (unsigned long)S5PC1XX_VA_CHIPID,
+                .pfn            = __phys_to_pfn(S5PC1XX_PA_CHIPID),
+                .length         = SZ_16,
+                .type           = MT_DEVICE,
+        }, {
+                .virtual        = (unsigned long)S5PC1XX_VA_CLK,
+                .pfn            = __phys_to_pfn(S5PC1XX_PA_CLK),
+                .length         = SZ_4K,
+                .type           = MT_DEVICE,
+        }, {
+                .virtual        = (unsigned long)S5PC1XX_VA_PWR,
+                .pfn            = __phys_to_pfn(S5PC1XX_PA_PWR),
+                .length         = SZ_4K,
+                .type           = MT_DEVICE,
+        }, {
+                .virtual        = (unsigned long)(S5PC1XX_VA_UART),
+                .pfn            = __phys_to_pfn(S5PC1XX_PA_UART),
+                .length         = SZ_4K,
+                .type           = MT_DEVICE,
+        }, {
+                .virtual        = (unsigned long)S5PC1XX_VA_VIC(0),
+                .pfn            = __phys_to_pfn(S5PC1XX_PA_VIC(0)),
+                .length         = SZ_4K,
+                .type           = MT_DEVICE,
+        }, {
+                .virtual        = (unsigned long)S5PC1XX_VA_VIC(1),
+                .pfn            = __phys_to_pfn(S5PC1XX_PA_VIC(1)),
+                .length         = SZ_4K,
+                .type           = MT_DEVICE,
+        }, {
+                .virtual        = (unsigned long)S5PC1XX_VA_VIC(2),
+                .pfn            = __phys_to_pfn(S5PC1XX_PA_VIC(2)),
+                .length         = SZ_4K,
+                .type           = MT_DEVICE,
+        }, {
+                .virtual        = (unsigned long)S5PC1XX_VA_TIMER,
+                .pfn            = __phys_to_pfn(S5PC1XX_PA_TIMER),
+                .length         = SZ_256,
+                .type           = MT_DEVICE,
+        },
+};
+
+/* read cpu identification code */
+
+void __init s5pc1xx_init_io(struct map_desc *mach_desc, int size)
+{
+        unsigned long idcode;
+
+        /* initialise the io descriptors we need for initialisation */
+        iotable_init(s5pc1xx_iodesc, ARRAY_SIZE(s5pc1xx_iodesc));
+        iotable_init(mach_desc, size);
+
+        idcode = __raw_readl(S5PC1XX_VA_CHIPID);
+        s3c_init_cpu(idcode, cpu_ids, ARRAY_SIZE(cpu_ids));
+}
diff --git a/arch/arm/plat-s5pc1xx/dev-uart.c b/arch/arm/plat-s5pc1xx/dev-uart.c
new file mode 100644
index 000000000000..f749bc5407b5
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/dev-uart.c
@@ -0,0 +1,174 @@
+/* linux/arch/arm/plat-s5pc1xx/dev-uart.c
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *      Byungho Min <bhmin@samsung.com>
+ *
+ * Based on plat-s3c64xx/dev-uart.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/irq.h>
+#include <mach/hardware.h>
+#include <mach/map.h>
+
+#include <plat/devs.h>
+
+/* Serial port registrations */
+
+/* 64xx uarts are closer together */
+
+static struct resource s5pc1xx_uart0_resource[] = {
+        [0] = {
+                .start  = S3C_PA_UART0,
+                .end    = S3C_PA_UART0 + 0x100,
+                .flags  = IORESOURCE_MEM,
+        },
+        [1] = {
+                .start  = IRQ_S3CUART_RX0,
+                .end    = IRQ_S3CUART_RX0,
+                .flags  = IORESOURCE_IRQ,
+        },
+        [2] = {
+                .start  = IRQ_S3CUART_TX0,
+                .end    = IRQ_S3CUART_TX0,
+                .flags  = IORESOURCE_IRQ,
+
+        },
+        [3] = {
+                .start  = IRQ_S3CUART_ERR0,
+                .end    = IRQ_S3CUART_ERR0,
+                .flags  = IORESOURCE_IRQ,
+        }
+};
+
+static struct resource s5pc1xx_uart1_resource[] = {
+        [0] = {
+                .start = S3C_PA_UART1,
+                .end   = S3C_PA_UART1 + 0x100,
+                .flags = IORESOURCE_MEM,
+        },
+        [1] = {
+                .start  = IRQ_S3CUART_RX1,
+                .end    = IRQ_S3CUART_RX1,
+                .flags  = IORESOURCE_IRQ,
+        },
+        [2] = {
+                .start  = IRQ_S3CUART_TX1,
+                .end    = IRQ_S3CUART_TX1,
+                .flags  = IORESOURCE_IRQ,
+
+        },
+        [3] = {
+                .start  = IRQ_S3CUART_ERR1,
+                .end    = IRQ_S3CUART_ERR1,
+                .flags  = IORESOURCE_IRQ,
+        },
+};
+
+static struct resource s5pc1xx_uart2_resource[] = {
+        [0] = {
+                .start = S3C_PA_UART2,
+                .end   = S3C_PA_UART2 + 0x100,
+                .flags = IORESOURCE_MEM,
+        },
+        [1] = {
+                .start  = IRQ_S3CUART_RX2,
+                .end    = IRQ_S3CUART_RX2,
+                .flags  = IORESOURCE_IRQ,
+        },
+        [2] = {
+                .start  = IRQ_S3CUART_TX2,
+                .end    = IRQ_S3CUART_TX2,
+                .flags  = IORESOURCE_IRQ,
+
+        },
+        [3] = {
+                .start  = IRQ_S3CUART_ERR2,
+                .end    = IRQ_S3CUART_ERR2,
+                .flags  = IORESOURCE_IRQ,
+        },
+};
+
+static struct resource s5pc1xx_uart3_resource[] = {
+        [0] = {
+                .start = S3C_PA_UART3,
+                .end   = S3C_PA_UART3 + 0x100,
+                .flags = IORESOURCE_MEM,
+        },
+        [1] = {
+                .start  = IRQ_S3CUART_RX3,
+                .end    = IRQ_S3CUART_RX3,
+                .flags  = IORESOURCE_IRQ,
+        },
+        [2] = {
+                .start  = IRQ_S3CUART_TX3,
+                .end    = IRQ_S3CUART_TX3,
+                .flags  = IORESOURCE_IRQ,
+
+        },
+        [3] = {
+                .start  = IRQ_S3CUART_ERR3,
+                .end    = IRQ_S3CUART_ERR3,
+                .flags  = IORESOURCE_IRQ,
+        },
+};
+
+
+struct s3c24xx_uart_resources s5pc1xx_uart_resources[] __initdata = {
+        [0] = {
+                .resources      = s5pc1xx_uart0_resource,
+                .nr_resources   = ARRAY_SIZE(s5pc1xx_uart0_resource),
+        },
+        [1] = {
+                .resources      = s5pc1xx_uart1_resource,
+                .nr_resources   = ARRAY_SIZE(s5pc1xx_uart1_resource),
+        },
+        [2] = {
+                .resources      = s5pc1xx_uart2_resource,
+                .nr_resources   = ARRAY_SIZE(s5pc1xx_uart2_resource),
+        },
+        [3] = {
+                .resources      = s5pc1xx_uart3_resource,
+                .nr_resources   = ARRAY_SIZE(s5pc1xx_uart3_resource),
+        },
+};
+
+/* uart devices */
+
+static struct platform_device s3c24xx_uart_device0 = {
+        .id             = 0,
+};
+
+static struct platform_device s3c24xx_uart_device1 = {
+        .id             = 1,
+};
+
+static struct platform_device s3c24xx_uart_device2 = {
+        .id             = 2,
+};
+
+static struct platform_device s3c24xx_uart_device3 = {
+        .id             = 3,
+};
+
+struct platform_device *s3c24xx_uart_src[4] = {
+        &s3c24xx_uart_device0,
+        &s3c24xx_uart_device1,
+        &s3c24xx_uart_device2,
+        &s3c24xx_uart_device3,
+};
+
+struct platform_device *s3c24xx_uart_devs[4] = {
+};
+
diff --git a/arch/arm/plat-s5pc1xx/include/plat/irqs.h b/arch/arm/plat-s5pc1xx/include/plat/irqs.h
new file mode 100644
index 000000000000..f07d8c3b25d6
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/include/plat/irqs.h
@@ -0,0 +1,182 @@
+/* linux/arch/arm/plat-s5pc1xx/include/plat/irqs.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *      Byungho Min <bhmin@samsung.com>
+ *
+ * S5PC1XX - Common IRQ support
+ *
+ * Based on plat-s3c64xx/include/plat/irqs.h
+ */
+
+#ifndef __ASM_PLAT_S5PC1XX_IRQS_H
+#define __ASM_PLAT_S5PC1XX_IRQS_H __FILE__
+
+/* we keep the first set of CPU IRQs out of the range of
+ * the ISA space, so that the PC104 has them to itself
+ * and we don't end up having to do horrible things to the
+ * standard ISA drivers....
+ *
+ * note, since we're using the VICs, our start must be a
+ * mulitple of 32 to allow the common code to work
+ */
+
+#define S3C_IRQ_OFFSET          (32)
+
+#define S3C_IRQ(x)              ((x) + S3C_IRQ_OFFSET)
+
+#define S3C_VIC0_BASE           S3C_IRQ(0)
+#define S3C_VIC1_BASE           S3C_IRQ(32)
+#define S3C_VIC2_BASE           S3C_IRQ(64)
+
+/* UART interrupts, each UART has 4 intterupts per channel so
+ * use the space between the ISA and S3C main interrupts. Note, these
+ * are not in the same order as the S3C24XX series! */
+
+#define IRQ_S3CUART_BASE0       (16)
+#define IRQ_S3CUART_BASE1       (20)
+#define IRQ_S3CUART_BASE2       (24)
+#define IRQ_S3CUART_BASE3       (28)
+
+#define UART_IRQ_RXD            (0)
+#define UART_IRQ_ERR            (1)
+#define UART_IRQ_TXD            (2)
+#define UART_IRQ_MODEM          (3)
+
+#define IRQ_S3CUART_RX0         (IRQ_S3CUART_BASE0 + UART_IRQ_RXD)
+#define IRQ_S3CUART_TX0         (IRQ_S3CUART_BASE0 + UART_IRQ_TXD)
+#define IRQ_S3CUART_ERR0        (IRQ_S3CUART_BASE0 + UART_IRQ_ERR)
+
+#define IRQ_S3CUART_RX1         (IRQ_S3CUART_BASE1 + UART_IRQ_RXD)
+#define IRQ_S3CUART_TX1         (IRQ_S3CUART_BASE1 + UART_IRQ_TXD)
+#define IRQ_S3CUART_ERR1        (IRQ_S3CUART_BASE1 + UART_IRQ_ERR)
+
+#define IRQ_S3CUART_RX2         (IRQ_S3CUART_BASE2 + UART_IRQ_RXD)
+#define IRQ_S3CUART_TX2         (IRQ_S3CUART_BASE2 + UART_IRQ_TXD)
+#define IRQ_S3CUART_ERR2        (IRQ_S3CUART_BASE2 + UART_IRQ_ERR)
+
+#define IRQ_S3CUART_RX3         (IRQ_S3CUART_BASE3 + UART_IRQ_RXD)
+#define IRQ_S3CUART_TX3         (IRQ_S3CUART_BASE3 + UART_IRQ_TXD)
+#define IRQ_S3CUART_ERR3        (IRQ_S3CUART_BASE3 + UART_IRQ_ERR)
+
+/* VIC based IRQs */
+
+#define S5PC1XX_IRQ_VIC0(x)     (S3C_VIC0_BASE + (x))
+#define S5PC1XX_IRQ_VIC1(x)     (S3C_VIC1_BASE + (x))
+#define S5PC1XX_IRQ_VIC2(x)     (S3C_VIC2_BASE + (x))
+
+/*
+ * VIC0: system, DMA, timer
+ */
+#define IRQ_EINT0               S5PC1XX_IRQ_VIC0(0)
+#define IRQ_EINT1               S5PC1XX_IRQ_VIC0(1)
+#define IRQ_EINT2               S5PC1XX_IRQ_VIC0(2)
+#define IRQ_EINT3               S5PC1XX_IRQ_VIC0(3)
+#define IRQ_EINT4               S5PC1XX_IRQ_VIC0(4)
+#define IRQ_EINT5               S5PC1XX_IRQ_VIC0(5)
+#define IRQ_EINT6               S5PC1XX_IRQ_VIC0(6)
+#define IRQ_EINT7               S5PC1XX_IRQ_VIC0(7)
+#define IRQ_EINT8               S5PC1XX_IRQ_VIC0(8)
+#define IRQ_EINT9               S5PC1XX_IRQ_VIC0(9)
+#define IRQ_EINT10              S5PC1XX_IRQ_VIC0(10)
+#define IRQ_EINT11              S5PC1XX_IRQ_VIC0(11)
+#define IRQ_EINT12              S5PC1XX_IRQ_VIC0(12)
+#define IRQ_EINT13              S5PC1XX_IRQ_VIC0(13)
+#define IRQ_EINT14              S5PC1XX_IRQ_VIC0(14)
+#define IRQ_EINT15              S5PC1XX_IRQ_VIC0(15)
+#define IRQ_EINT16_31           S5PC1XX_IRQ_VIC0(16)
+#define IRQ_BATF                S5PC1XX_IRQ_VIC0(17)
+#define IRQ_MDMA                S5PC1XX_IRQ_VIC0(18)
+#define IRQ_PDMA0               S5PC1XX_IRQ_VIC0(19)
+#define IRQ_PDMA1               S5PC1XX_IRQ_VIC0(20)
+#define IRQ_TIMER0              S5PC1XX_IRQ_VIC0(21)
+#define IRQ_TIMER1              S5PC1XX_IRQ_VIC0(22)
+#define IRQ_TIMER2              S5PC1XX_IRQ_VIC0(23)
+#define IRQ_TIMER3              S5PC1XX_IRQ_VIC0(24)
+#define IRQ_TIMER4              S5PC1XX_IRQ_VIC0(25)
+#define IRQ_SYSTIMER            S5PC1XX_IRQ_VIC0(26)
+#define IRQ_WDT                 S5PC1XX_IRQ_VIC0(27)
+#define IRQ_RTC_ALARM           S5PC1XX_IRQ_VIC0(28)
+#define IRQ_RTC_TIC             S5PC1XX_IRQ_VIC0(29)
+#define IRQ_GPIOINT             S5PC1XX_IRQ_VIC0(30)
+
+/*
+ * VIC1: ARM, power, memory, connectivity
+ */
+#define IRQ_CORTEX0             S5PC1XX_IRQ_VIC1(0)
+#define IRQ_CORTEX1             S5PC1XX_IRQ_VIC1(1)
+#define IRQ_CORTEX2             S5PC1XX_IRQ_VIC1(2)
+#define IRQ_CORTEX3             S5PC1XX_IRQ_VIC1(3)
+#define IRQ_CORTEX4             S5PC1XX_IRQ_VIC1(4)
+#define IRQ_IEMAPC              S5PC1XX_IRQ_VIC1(5)
+#define IRQ_IEMIEC              S5PC1XX_IRQ_VIC1(6)
+#define IRQ_ONENAND             S5PC1XX_IRQ_VIC1(7)
+#define IRQ_NFC                 S5PC1XX_IRQ_VIC1(8)
+#define IRQ_CFC                 S5PC1XX_IRQ_VIC1(9)
+#define IRQ_UART0               S5PC1XX_IRQ_VIC1(10)
+#define IRQ_UART1               S5PC1XX_IRQ_VIC1(11)
+#define IRQ_UART2               S5PC1XX_IRQ_VIC1(12)
+#define IRQ_UART3               S5PC1XX_IRQ_VIC1(13)
+#define IRQ_IIC                 S5PC1XX_IRQ_VIC1(14)
+#define IRQ_SPI0                S5PC1XX_IRQ_VIC1(15)
+#define IRQ_SPI1                S5PC1XX_IRQ_VIC1(16)
+#define IRQ_SPI2                S5PC1XX_IRQ_VIC1(17)
+#define IRQ_IRDA                S5PC1XX_IRQ_VIC1(18)
+#define IRQ_CAN0                S5PC1XX_IRQ_VIC1(19)
+#define IRQ_CAN1                S5PC1XX_IRQ_VIC1(20)
+#define IRQ_HSIRX               S5PC1XX_IRQ_VIC1(21)
+#define IRQ_HSITX               S5PC1XX_IRQ_VIC1(22)
+#define IRQ_UHOST               S5PC1XX_IRQ_VIC1(23)
+#define IRQ_OTG                 S5PC1XX_IRQ_VIC1(24)
+#define IRQ_MSM                 S5PC1XX_IRQ_VIC1(25)
+#define IRQ_HSMMC0              S5PC1XX_IRQ_VIC1(26)
+#define IRQ_HSMMC1              S5PC1XX_IRQ_VIC1(27)
+#define IRQ_HSMMC2              S5PC1XX_IRQ_VIC1(28)
+#define IRQ_MIPICSI             S5PC1XX_IRQ_VIC1(29)
+#define IRQ_MIPIDSI             S5PC1XX_IRQ_VIC1(30)
+
+/*
+ * VIC2: multimedia, audio, security
+ */
+#define IRQ_LCD0                S5PC1XX_IRQ_VIC2(0)
+#define IRQ_LCD1                S5PC1XX_IRQ_VIC2(1)
+#define IRQ_LCD2                S5PC1XX_IRQ_VIC2(2)
+#define IRQ_LCD3                S5PC1XX_IRQ_VIC2(3)
+#define IRQ_ROTATOR             S5PC1XX_IRQ_VIC2(4)
+#define IRQ_FIMC0               S5PC1XX_IRQ_VIC2(5)
+#define IRQ_FIMC1               S5PC1XX_IRQ_VIC2(6)
+#define IRQ_FIMC2               S5PC1XX_IRQ_VIC2(7)
+#define IRQ_JPEG                S5PC1XX_IRQ_VIC2(8)
+#define IRQ_2D                  S5PC1XX_IRQ_VIC2(9)
+#define IRQ_3D                  S5PC1XX_IRQ_VIC2(10)
+#define IRQ_MIXER               S5PC1XX_IRQ_VIC2(11)
+#define IRQ_HDMI                S5PC1XX_IRQ_VIC2(12)
+#define IRQ_IIC1                S5PC1XX_IRQ_VIC2(13)
+#define IRQ_MFC                 S5PC1XX_IRQ_VIC2(14)
+#define IRQ_TVENC               S5PC1XX_IRQ_VIC2(15)
+#define IRQ_I2S0                S5PC1XX_IRQ_VIC2(16)
+#define IRQ_I2S1                S5PC1XX_IRQ_VIC2(17)
+#define IRQ_I2S2                S5PC1XX_IRQ_VIC2(18)
+#define IRQ_AC97                S5PC1XX_IRQ_VIC2(19)
+#define IRQ_PCM0                S5PC1XX_IRQ_VIC2(20)
+#define IRQ_PCM1                S5PC1XX_IRQ_VIC2(21)
+#define IRQ_SPDIF               S5PC1XX_IRQ_VIC2(22)
+#define IRQ_ADC                 S5PC1XX_IRQ_VIC2(23)
+#define IRQ_PENDN               S5PC1XX_IRQ_VIC2(24)
+#define IRQ_TC                  IRQ_PENDN
+#define IRQ_KEYPAD              S5PC1XX_IRQ_VIC2(25)
+#define IRQ_CG                  S5PC1XX_IRQ_VIC2(26)
+#define IRQ_SEC                 S5PC1XX_IRQ_VIC2(27)
+#define IRQ_SECRX               S5PC1XX_IRQ_VIC2(28)
+#define IRQ_SECTX               S5PC1XX_IRQ_VIC2(29)
+#define IRQ_SDMIRQ              S5PC1XX_IRQ_VIC2(30)
+#define IRQ_SDMFIQ              S5PC1XX_IRQ_VIC2(31)
+
+#define S3C_IRQ_EINT_BASE       (IRQ_SDMFIQ + 1)
+
+#define S3C_EINT(x)             ((x) + S3C_IRQ_EINT_BASE)
+#define IRQ_EINT(x)             S3C_EINT(x)
+
+#define NR_IRQS                 (IRQ_EINT(31)+1)
+
+#endif /* __ASM_PLAT_S5PC1XX_IRQS_H */
+
diff --git a/arch/arm/plat-s5pc1xx/include/plat/pll.h b/arch/arm/plat-s5pc1xx/include/plat/pll.h
new file mode 100644
index 000000000000..21afef1573e7
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/include/plat/pll.h
@@ -0,0 +1,38 @@
+/* arch/arm/plat-s5pc1xx/include/plat/pll.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *      Byungho Min <bhmin@samsung.com>
+ *
+ * S5PC1XX PLL code
+ *
+ * Based on plat-s3c64xx/include/plat/pll.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define S5P_PLL_MDIV_MASK       ((1 << (25-16+1)) - 1)
+#define S5P_PLL_PDIV_MASK       ((1 << (13-8+1)) - 1)
+#define S5P_PLL_SDIV_MASK       ((1 << (2-0+1)) - 1)
+#define S5P_PLL_MDIV_SHIFT      (16)
+#define S5P_PLL_PDIV_SHIFT      (8)
+#define S5P_PLL_SDIV_SHIFT      (0)
+
+#include <asm/div64.h>
+
+static inline unsigned long s5pc1xx_get_pll(unsigned long baseclk,
+                                            u32 pllcon)
+{
+        u32 mdiv, pdiv, sdiv;
+        u64 fvco = baseclk;
+
+        mdiv = (pllcon >> S5P_PLL_MDIV_SHIFT) & S5P_PLL_MDIV_MASK;
+        pdiv = (pllcon >> S5P_PLL_PDIV_SHIFT) & S5P_PLL_PDIV_MASK;
+        sdiv = (pllcon >> S5P_PLL_SDIV_SHIFT) & S5P_PLL_SDIV_MASK;
+
+        fvco *= mdiv;
+        do_div(fvco, (pdiv << sdiv));
+
+        return (unsigned long)fvco;
+}
diff --git a/arch/arm/plat-s5pc1xx/include/plat/regs-clock.h b/arch/arm/plat-s5pc1xx/include/plat/regs-clock.h
new file mode 100644
index 000000000000..75c8390cb827
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/include/plat/regs-clock.h
@@ -0,0 +1,421 @@
+/* arch/arm/plat-s5pc1xx/include/plat/regs-clock.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *      Byungho Min <bhmin@samsung.com>
+ *
+ * S5PC1XX clock register definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __PLAT_REGS_CLOCK_H
+#define __PLAT_REGS_CLOCK_H __FILE__
+
+#define S5PC1XX_CLKREG(x)               (S5PC1XX_VA_CLK + (x))
+
+#define S5PC1XX_APLL_LOCK               S5PC1XX_CLKREG(0x00)
+#define S5PC1XX_MPLL_LOCK               S5PC1XX_CLKREG(0x04)
+#define S5PC1XX_EPLL_LOCK               S5PC1XX_CLKREG(0x08)
+#define S5PC100_HPLL_LOCK               S5PC1XX_CLKREG(0x0C)
+
+#define S5PC1XX_APLL_CON                S5PC1XX_CLKREG(0x100)
+#define S5PC1XX_MPLL_CON                S5PC1XX_CLKREG(0x104)
+#define S5PC1XX_EPLL_CON                S5PC1XX_CLKREG(0x108)
+#define S5PC100_HPLL_CON                S5PC1XX_CLKREG(0x10C)
+
+#define S5PC1XX_CLK_SRC0                S5PC1XX_CLKREG(0x200)
+#define S5PC1XX_CLK_SRC1                S5PC1XX_CLKREG(0x204)
+#define S5PC1XX_CLK_SRC2                S5PC1XX_CLKREG(0x208)
+#define S5PC1XX_CLK_SRC3                S5PC1XX_CLKREG(0x20C)
+
+#define S5PC1XX_CLK_DIV0                S5PC1XX_CLKREG(0x300)
+#define S5PC1XX_CLK_DIV1                S5PC1XX_CLKREG(0x304)
+#define S5PC1XX_CLK_DIV2                S5PC1XX_CLKREG(0x308)
+#define S5PC1XX_CLK_DIV3                S5PC1XX_CLKREG(0x30C)
+#define S5PC1XX_CLK_DIV4                S5PC1XX_CLKREG(0x310)
+
+#define S5PC100_CLK_OUT                 S5PC1XX_CLKREG(0x400)
+
+#define S5PC100_CLKGATE_D00             S5PC1XX_CLKREG(0x500)
+#define S5PC100_CLKGATE_D01             S5PC1XX_CLKREG(0x504)
+#define S5PC100_CLKGATE_D02             S5PC1XX_CLKREG(0x508)
+
+#define S5PC100_CLKGATE_D10             S5PC1XX_CLKREG(0x520)
+#define S5PC100_CLKGATE_D11             S5PC1XX_CLKREG(0x524)
+#define S5PC100_CLKGATE_D12             S5PC1XX_CLKREG(0x528)
+#define S5PC100_CLKGATE_D13             S5PC1XX_CLKREG(0x52C)
+#define S5PC100_CLKGATE_D14             S5PC1XX_CLKREG(0x530)
+#define S5PC100_CLKGATE_D15             S5PC1XX_CLKREG(0x534)
+
+#define S5PC100_CLKGATE_D20             S5PC1XX_CLKREG(0x540)
+
+#define S5PC100_SCLKGATE0               S5PC1XX_CLKREG(0x560)
+#define S5PC100_SCLKGATE1               S5PC1XX_CLKREG(0x564)
+
+#define S5PC100_OTHERS          S5PC1XX_CLKREG(0x8200)
+
+#define S5PC1XX_EPLL_EN     (1<<31)
+#define S5PC1XX_EPLL_MASK   0xffffffff
+#define S5PC1XX_EPLLVAL(_m, _p, _s)   ((_m) << 16 | ((_p) << 8) | ((_s)))
+
+/* CLKSRC0 */
+#define S5PC1XX_CLKSRC0_APLL_MASK               (0x1<<0)
+#define S5PC1XX_CLKSRC0_APLL_SHIFT              (0)
+#define S5PC1XX_CLKSRC0_MPLL_MASK               (0x1<<4)
+#define S5PC1XX_CLKSRC0_MPLL_SHIFT              (4)
+#define S5PC1XX_CLKSRC0_EPLL_MASK               (0x1<<8)
+#define S5PC1XX_CLKSRC0_EPLL_SHIFT              (8)
+#define S5PC100_CLKSRC0_HPLL_MASK               (0x1<<12)
+#define S5PC100_CLKSRC0_HPLL_SHIFT              (12)
+#define S5PC100_CLKSRC0_AMMUX_MASK              (0x1<<16)
+#define S5PC100_CLKSRC0_AMMUX_SHIFT             (16)
+#define S5PC100_CLKSRC0_HREF_MASK               (0x1<<20)
+#define S5PC100_CLKSRC0_HREF_SHIFT              (20)
+#define S5PC1XX_CLKSRC0_ONENAND_MASK    (0x1<<24)
+#define S5PC1XX_CLKSRC0_ONENAND_SHIFT   (24)
+
+
+/* CLKSRC1 */
+#define S5PC100_CLKSRC1_UART_MASK               (0x1<<0)
+#define S5PC100_CLKSRC1_UART_SHIFT              (0)
+#define S5PC100_CLKSRC1_SPI0_MASK               (0x3<<4)
+#define S5PC100_CLKSRC1_SPI0_SHIFT              (4)
+#define S5PC100_CLKSRC1_SPI1_MASK               (0x3<<8)
+#define S5PC100_CLKSRC1_SPI1_SHIFT              (8)
+#define S5PC100_CLKSRC1_SPI2_MASK               (0x3<<12)
+#define S5PC100_CLKSRC1_SPI2_SHIFT              (12)
+#define S5PC100_CLKSRC1_IRDA_MASK               (0x3<<16)
+#define S5PC100_CLKSRC1_IRDA_SHIFT              (16)
+#define S5PC100_CLKSRC1_UHOST_MASK              (0x3<<20)
+#define S5PC100_CLKSRC1_UHOST_SHIFT             (20)
+#define S5PC100_CLKSRC1_CLK48M_MASK             (0x1<<24)
+#define S5PC100_CLKSRC1_CLK48M_SHIFT    (24)
+
+/* CLKSRC2 */
+#define S5PC100_CLKSRC2_MMC0_MASK               (0x3<<0)
+#define S5PC100_CLKSRC2_MMC0_SHIFT              (0)
+#define S5PC100_CLKSRC2_MMC1_MASK               (0x3<<4)
+#define S5PC100_CLKSRC2_MMC1_SHIFT              (4)
+#define S5PC100_CLKSRC2_MMC2_MASK               (0x3<<8)
+#define S5PC100_CLKSRC2_MMC2_SHIFT              (8)
+#define S5PC100_CLKSRC2_LCD_MASK                (0x3<<12)
+#define S5PC100_CLKSRC2_LCD_SHIFT               (12)
+#define S5PC100_CLKSRC2_FIMC0_MASK              (0x3<<16)
+#define S5PC100_CLKSRC2_FIMC0_SHIFT             (16)
+#define S5PC100_CLKSRC2_FIMC1_MASK              (0x3<<20)
+#define S5PC100_CLKSRC2_FIMC1_SHIFT             (20)
+#define S5PC100_CLKSRC2_FIMC2_MASK              (0x3<<24)
+#define S5PC100_CLKSRC2_FIMC2_SHIFT             (24)
+#define S5PC100_CLKSRC2_MIXER_MASK              (0x3<<28)
+#define S5PC100_CLKSRC2_MIXER_SHIFT             (28)
+
+/* CLKSRC3 */
+#define S5PC100_CLKSRC3_PWI_MASK                (0x3<<0)
+#define S5PC100_CLKSRC3_PWI_SHIFT               (0)
+#define S5PC100_CLKSRC3_HCLKD2_MASK             (0x1<<4)
+#define S5PC100_CLKSRC3_HCLKD2_SHIFT    (4)
+#define S5PC100_CLKSRC3_I2SD2_MASK              (0x3<<8)
+#define S5PC100_CLKSRC3_I2SD2_SHIFT             (8)
+#define S5PC100_CLKSRC3_AUDIO0_MASK             (0x7<<12)
+#define S5PC100_CLKSRC3_AUDIO0_SHIFT    (12)
+#define S5PC100_CLKSRC3_AUDIO1_MASK             (0x7<<16)
+#define S5PC100_CLKSRC3_AUDIO1_SHIFT    (16)
+#define S5PC100_CLKSRC3_AUDIO2_MASK             (0x7<<20)
+#define S5PC100_CLKSRC3_AUDIO2_SHIFT    (20)
+#define S5PC100_CLKSRC3_SPDIF_MASK              (0x3<<24)
+#define S5PC100_CLKSRC3_SPDIF_SHIFT             (24)
+
+
+/* CLKDIV0 */
+#define S5PC1XX_CLKDIV0_APLL_MASK               (0x1<<0)
+#define S5PC1XX_CLKDIV0_APLL_SHIFT              (0)
+#define S5PC100_CLKDIV0_ARM_MASK                (0x7<<4)
+#define S5PC100_CLKDIV0_ARM_SHIFT               (4)
+#define S5PC100_CLKDIV0_D0_MASK         (0x7<<8)
+#define S5PC100_CLKDIV0_D0_SHIFT                (8)
+#define S5PC100_CLKDIV0_PCLKD0_MASK             (0x7<<12)
+#define S5PC100_CLKDIV0_PCLKD0_SHIFT    (12)
+#define S5PC100_CLKDIV0_SECSS_MASK              (0x7<<16)
+#define S5PC100_CLKDIV0_SECSS_SHIFT             (16)
+
+/* CLKDIV1 */
+#define S5PC100_CLKDIV1_AM_MASK         (0x7<<0)
+#define S5PC100_CLKDIV1_AM_SHIFT                (0)
+#define S5PC100_CLKDIV1_MPLL_MASK               (0x3<<4)
+#define S5PC100_CLKDIV1_MPLL_SHIFT              (4)
+#define S5PC100_CLKDIV1_MPLL2_MASK              (0x1<<8)
+#define S5PC100_CLKDIV1_MPLL2_SHIFT             (8)
+#define S5PC100_CLKDIV1_D1_MASK         (0x7<<12)
+#define S5PC100_CLKDIV1_D1_SHIFT                (12)
+#define S5PC100_CLKDIV1_PCLKD1_MASK             (0x7<<16)
+#define S5PC100_CLKDIV1_PCLKD1_SHIFT    (16)
+#define S5PC100_CLKDIV1_ONENAND_MASK    (0x3<<20)
+#define S5PC100_CLKDIV1_ONENAND_SHIFT   (20)
+#define S5PC100_CLKDIV1_CAM_MASK                (0x1F<<24)
+#define S5PC100_CLKDIV1_CAM_SHIFT               (24)
+
+/* CLKDIV2 */
+#define S5PC100_CLKDIV2_UART_MASK               (0x7<<0)
+#define S5PC100_CLKDIV2_UART_SHIFT              (0)
+#define S5PC100_CLKDIV2_SPI0_MASK               (0xf<<4)
+#define S5PC100_CLKDIV2_SPI0_SHIFT              (4)
+#define S5PC100_CLKDIV2_SPI1_MASK               (0xf<<8)
+#define S5PC100_CLKDIV2_SPI1_SHIFT              (8)
+#define S5PC100_CLKDIV2_SPI2_MASK               (0xf<<12)
+#define S5PC100_CLKDIV2_SPI2_SHIFT              (12)
+#define S5PC100_CLKDIV2_IRDA_MASK               (0xf<<16)
+#define S5PC100_CLKDIV2_IRDA_SHIFT              (16)
+#define S5PC100_CLKDIV2_UHOST_MASK              (0xf<<20)
+#define S5PC100_CLKDIV2_UHOST_SHIFT             (20)
+
+/* CLKDIV3 */
+#define S5PC100_CLKDIV3_MMC0_MASK               (0xf<<0)
+#define S5PC100_CLKDIV3_MMC0_SHIFT              (0)
+#define S5PC100_CLKDIV3_MMC1_MASK               (0xf<<4)
+#define S5PC100_CLKDIV3_MMC1_SHIFT              (4)
+#define S5PC100_CLKDIV3_MMC2_MASK               (0xf<<8)
+#define S5PC100_CLKDIV3_MMC2_SHIFT              (8)
+#define S5PC100_CLKDIV3_LCD_MASK                (0xf<<12)
+#define S5PC100_CLKDIV3_LCD_SHIFT               (12)
+#define S5PC100_CLKDIV3_FIMC0_MASK              (0xf<<16)
+#define S5PC100_CLKDIV3_FIMC0_SHIFT             (16)
+#define S5PC100_CLKDIV3_FIMC1_MASK              (0xf<<20)
+#define S5PC100_CLKDIV3_FIMC1_SHIFT             (20)
+#define S5PC100_CLKDIV3_FIMC2_MASK              (0xf<<24)
+#define S5PC100_CLKDIV3_FIMC2_SHIFT             (24)
+#define S5PC100_CLKDIV3_HDMI_MASK               (0xf<<28)
+#define S5PC100_CLKDIV3_HDMI_SHIFT              (28)
+
+/* CLKDIV4 */
+#define S5PC100_CLKDIV4_PWI_MASK                (0x7<<0)
+#define S5PC100_CLKDIV4_PWI_SHIFT               (0)
+#define S5PC100_CLKDIV4_HCLKD2_MASK             (0x7<<4)
+#define S5PC100_CLKDIV4_HCLKD2_SHIFT    (4)
+#define S5PC100_CLKDIV4_I2SD2_MASK              (0xf<<8)
+#define S5PC100_CLKDIV4_I2SD2_SHIFT             (8)
+#define S5PC100_CLKDIV4_AUDIO0_MASK             (0xf<<12)
+#define S5PC100_CLKDIV4_AUDIO0_SHIFT    (12)
+#define S5PC100_CLKDIV4_AUDIO1_MASK             (0xf<<16)
+#define S5PC100_CLKDIV4_AUDIO1_SHIFT    (16)
+#define S5PC100_CLKDIV4_AUDIO2_MASK             (0xf<<20)
+#define S5PC100_CLKDIV4_AUDIO2_SHIFT    (20)
+
+
+/* HCLKD0/PCLKD0 Clock Gate 0 Registers */
+#define S5PC100_CLKGATE_D00_INTC                (1<<0)
+#define S5PC100_CLKGATE_D00_TZIC                (1<<1)
+#define S5PC100_CLKGATE_D00_CFCON               (1<<2)
+#define S5PC100_CLKGATE_D00_MDMA                (1<<3)
+#define S5PC100_CLKGATE_D00_G2D         (1<<4)
+#define S5PC100_CLKGATE_D00_SECSS               (1<<5)
+#define S5PC100_CLKGATE_D00_CSSYS               (1<<6)
+
+/* HCLKD0/PCLKD0 Clock Gate 1 Registers */
+#define S5PC100_CLKGATE_D01_DMC         (1<<0)
+#define S5PC100_CLKGATE_D01_SROMC               (1<<1)
+#define S5PC100_CLKGATE_D01_ONENAND             (1<<2)
+#define S5PC100_CLKGATE_D01_NFCON               (1<<3)
+#define S5PC100_CLKGATE_D01_INTMEM              (1<<4)
+#define S5PC100_CLKGATE_D01_EBI         (1<<5)
+
+/* PCLKD0 Clock Gate 2 Registers */
+#define S5PC100_CLKGATE_D02_SECKEY              (1<<1)
+#define S5PC100_CLKGATE_D02_SDM         (1<<2)
+
+/* HCLKD1/PCLKD1 Clock Gate 0 Registers */
+#define S5PC100_CLKGATE_D10_PDMA0               (1<<0)
+#define S5PC100_CLKGATE_D10_PDMA1               (1<<1)
+#define S5PC100_CLKGATE_D10_USBHOST             (1<<2)
+#define S5PC100_CLKGATE_D10_USBOTG              (1<<3)
+#define S5PC100_CLKGATE_D10_MODEMIF             (1<<4)
+#define S5PC100_CLKGATE_D10_HSMMC0              (1<<5)
+#define S5PC100_CLKGATE_D10_HSMMC1              (1<<6)
+#define S5PC100_CLKGATE_D10_HSMMC2              (1<<7)
+
+/* HCLKD1/PCLKD1 Clock Gate 1 Registers */
+#define S5PC100_CLKGATE_D11_LCD         (1<<0)
+#define S5PC100_CLKGATE_D11_ROTATOR             (1<<1)
+#define S5PC100_CLKGATE_D11_FIMC0               (1<<2)
+#define S5PC100_CLKGATE_D11_FIMC1               (1<<3)
+#define S5PC100_CLKGATE_D11_FIMC2               (1<<4)
+#define S5PC100_CLKGATE_D11_JPEG                (1<<5)
+#define S5PC100_CLKGATE_D11_DSI         (1<<6)
+#define S5PC100_CLKGATE_D11_CSI         (1<<7)
+#define S5PC100_CLKGATE_D11_G3D         (1<<8)
+
+/* HCLKD1/PCLKD1 Clock Gate 2 Registers */
+#define S5PC100_CLKGATE_D12_TV          (1<<0)
+#define S5PC100_CLKGATE_D12_VP          (1<<1)
+#define S5PC100_CLKGATE_D12_MIXER               (1<<2)
+#define S5PC100_CLKGATE_D12_HDMI                (1<<3)
+#define S5PC100_CLKGATE_D12_MFC         (1<<4)
+
+/* HCLKD1/PCLKD1 Clock Gate 3 Registers */
+#define S5PC100_CLKGATE_D13_CHIPID              (1<<0)
+#define S5PC100_CLKGATE_D13_GPIO                (1<<1)
+#define S5PC100_CLKGATE_D13_APC         (1<<2)
+#define S5PC100_CLKGATE_D13_IEC         (1<<3)
+#define S5PC100_CLKGATE_D13_PWM         (1<<6)
+#define S5PC100_CLKGATE_D13_SYSTIMER    (1<<7)
+#define S5PC100_CLKGATE_D13_WDT         (1<<8)
+#define S5PC100_CLKGATE_D13_RTC         (1<<9)
+
+/* HCLKD1/PCLKD1 Clock Gate 4 Registers */
+#define S5PC100_CLKGATE_D14_UART0               (1<<0)
+#define S5PC100_CLKGATE_D14_UART1               (1<<1)
+#define S5PC100_CLKGATE_D14_UART2               (1<<2)
+#define S5PC100_CLKGATE_D14_UART3               (1<<3)
+#define S5PC100_CLKGATE_D14_IIC         (1<<4)
+#define S5PC100_CLKGATE_D14_HDMI_IIC    (1<<5)
+#define S5PC100_CLKGATE_D14_SPI0                (1<<6)
+#define S5PC100_CLKGATE_D14_SPI1                (1<<7)
+#define S5PC100_CLKGATE_D14_SPI2                (1<<8)
+#define S5PC100_CLKGATE_D14_IRDA                (1<<9)
+#define S5PC100_CLKGATE_D14_CCAN0               (1<<10)
+#define S5PC100_CLKGATE_D14_CCAN1               (1<<11)
+#define S5PC100_CLKGATE_D14_HSITX               (1<<12)
+#define S5PC100_CLKGATE_D14_HSIRX               (1<<13)
+
+/* HCLKD1/PCLKD1 Clock Gate 5 Registers */
+#define S5PC100_CLKGATE_D15_IIS0                (1<<0)
+#define S5PC100_CLKGATE_D15_IIS1                (1<<1)
+#define S5PC100_CLKGATE_D15_IIS2                (1<<2)
+#define S5PC100_CLKGATE_D15_AC97                (1<<3)
+#define S5PC100_CLKGATE_D15_PCM0                (1<<4)
+#define S5PC100_CLKGATE_D15_PCM1                (1<<5)
+#define S5PC100_CLKGATE_D15_SPDIF               (1<<6)
+#define S5PC100_CLKGATE_D15_TSADC               (1<<7)
+#define S5PC100_CLKGATE_D15_KEYIF               (1<<8)
+#define S5PC100_CLKGATE_D15_CG          (1<<9)
+
+/* HCLKD2 Clock Gate 0 Registers */
+#define S5PC100_CLKGATE_D20_HCLKD2              (1<<0)
+#define S5PC100_CLKGATE_D20_I2SD2               (1<<1)
+
+/* Special Clock Gate 0 Registers */
+#define S5PC1XX_CLKGATE_SCLK0_HPM               (1<<0)
+#define S5PC1XX_CLKGATE_SCLK0_PWI               (1<<1)
+#define S5PC100_CLKGATE_SCLK0_ONENAND   (1<<2)
+#define S5PC100_CLKGATE_SCLK0_UART              (1<<3)
+#define S5PC100_CLKGATE_SCLK0_SPI0              (1<<4)
+#define S5PC100_CLKGATE_SCLK0_SPI1              (1<<5)
+#define S5PC100_CLKGATE_SCLK0_SPI2              (1<<6)
+#define S5PC100_CLKGATE_SCLK0_SPI0_48   (1<<7)
+#define S5PC100_CLKGATE_SCLK0_SPI1_48   (1<<8)
+#define S5PC100_CLKGATE_SCLK0_SPI2_48   (1<<9)
+#define S5PC100_CLKGATE_SCLK0_IRDA              (1<<10)
+#define S5PC100_CLKGATE_SCLK0_USBHOST   (1<<11)
+#define S5PC100_CLKGATE_SCLK0_MMC0              (1<<12)
+#define S5PC100_CLKGATE_SCLK0_MMC1              (1<<13)
+#define S5PC100_CLKGATE_SCLK0_MMC2              (1<<14)
+#define S5PC100_CLKGATE_SCLK0_MMC0_48   (1<<15)
+#define S5PC100_CLKGATE_SCLK0_MMC1_48   (1<<16)
+#define S5PC100_CLKGATE_SCLK0_MMC2_48   (1<<17)
+
+/* Special Clock Gate 1 Registers */
+#define S5PC100_CLKGATE_SCLK1_LCD               (1<<0)
+#define S5PC100_CLKGATE_SCLK1_FIMC0             (1<<1)
+#define S5PC100_CLKGATE_SCLK1_FIMC1             (1<<2)
+#define S5PC100_CLKGATE_SCLK1_FIMC2             (1<<3)
+#define S5PC100_CLKGATE_SCLK1_TV54              (1<<4)
+#define S5PC100_CLKGATE_SCLK1_VDAC54    (1<<5)
+#define S5PC100_CLKGATE_SCLK1_MIXER             (1<<6)
+#define S5PC100_CLKGATE_SCLK1_HDMI              (1<<7)
+#define S5PC100_CLKGATE_SCLK1_AUDIO0    (1<<8)
+#define S5PC100_CLKGATE_SCLK1_AUDIO1    (1<<9)
+#define S5PC100_CLKGATE_SCLK1_AUDIO2    (1<<10)
+#define S5PC100_CLKGATE_SCLK1_SPDIF             (1<<11)
+#define S5PC100_CLKGATE_SCLK1_CAM               (1<<12)
+
+/* register for power management */
+#define S5PC100_PWR_CFG                 S5PC1XX_CLKREG(0x8000)
+#define S5PC100_EINT_WAKEUP_MASK        S5PC1XX_CLKREG(0x8004)
+#define S5PC100_NORMAL_CFG              S5PC1XX_CLKREG(0x8010)
+#define S5PC100_STOP_CFG                S5PC1XX_CLKREG(0x8014)
+#define S5PC100_SLEEP_CFG               S5PC1XX_CLKREG(0x8018)
+#define S5PC100_STOP_MEM_CFG    S5PC1XX_CLKREG(0x801C)
+#define S5PC100_OSC_FREQ                S5PC1XX_CLKREG(0x8100)
+#define S5PC100_OSC_STABLE              S5PC1XX_CLKREG(0x8104)
+#define S5PC100_PWR_STABLE              S5PC1XX_CLKREG(0x8108)
+#define S5PC100_MTC_STABLE              S5PC1XX_CLKREG(0x8110)
+#define S5PC100_CLAMP_STABLE    S5PC1XX_CLKREG(0x8114)
+#define S5PC100_OTHERS          S5PC1XX_CLKREG(0x8200)
+#define S5PC100_RST_STAT                S5PC1XX_CLKREG(0x8300)
+#define S5PC100_WAKEUP_STAT     S5PC1XX_CLKREG(0x8304)
+#define S5PC100_BLK_PWR_STAT    S5PC1XX_CLKREG(0x8308)
+#define S5PC100_INFORM0                 S5PC1XX_CLKREG(0x8400)
+#define S5PC100_INFORM1                 S5PC1XX_CLKREG(0x8404)
+#define S5PC100_INFORM2                 S5PC1XX_CLKREG(0x8408)
+#define S5PC100_INFORM3                 S5PC1XX_CLKREG(0x840C)
+#define S5PC100_INFORM4                 S5PC1XX_CLKREG(0x8410)
+#define S5PC100_INFORM5                 S5PC1XX_CLKREG(0x8414)
+#define S5PC100_INFORM6                 S5PC1XX_CLKREG(0x8418)
+#define S5PC100_INFORM7                 S5PC1XX_CLKREG(0x841C)
+#define S5PC100_DCGIDX_MAP0     S5PC1XX_CLKREG(0x8500)
+#define S5PC100_DCGIDX_MAP1     S5PC1XX_CLKREG(0x8504)
+#define S5PC100_DCGIDX_MAP2     S5PC1XX_CLKREG(0x8508)
+#define S5PC100_DCGPERF_MAP0    S5PC1XX_CLKREG(0x850C)
+#define S5PC100_DCGPERF_MAP1    S5PC1XX_CLKREG(0x8510)
+#define S5PC100_DVCIDX_MAP              S5PC1XX_CLKREG(0x8514)
+#define S5PC100_FREQ_CPU                S5PC1XX_CLKREG(0x8518)
+#define S5PC100_FREQ_DPM                S5PC1XX_CLKREG(0x851C)
+#define S5PC100_DVSEMCLK_EN     S5PC1XX_CLKREG(0x8520)
+#define S5PC100_APLL_CON_L8     S5PC1XX_CLKREG(0x8600)
+#define S5PC100_APLL_CON_L7     S5PC1XX_CLKREG(0x8604)
+#define S5PC100_APLL_CON_L6     S5PC1XX_CLKREG(0x8608)
+#define S5PC100_APLL_CON_L5     S5PC1XX_CLKREG(0x860C)
+#define S5PC100_APLL_CON_L4     S5PC1XX_CLKREG(0x8610)
+#define S5PC100_APLL_CON_L3     S5PC1XX_CLKREG(0x8614)
+#define S5PC100_APLL_CON_L2     S5PC1XX_CLKREG(0x8618)
+#define S5PC100_APLL_CON_L1     S5PC1XX_CLKREG(0x861C)
+#define S5PC100_IEM_CONTROL     S5PC1XX_CLKREG(0x8620)
+#define S5PC100_CLKDIV_IEM_L8   S5PC1XX_CLKREG(0x8700)
+#define S5PC100_CLKDIV_IEM_L7   S5PC1XX_CLKREG(0x8704)
+#define S5PC100_CLKDIV_IEM_L6   S5PC1XX_CLKREG(0x8708)
+#define S5PC100_CLKDIV_IEM_L5   S5PC1XX_CLKREG(0x870C)
+#define S5PC100_CLKDIV_IEM_L4   S5PC1XX_CLKREG(0x8710)
+#define S5PC100_CLKDIV_IEM_L3   S5PC1XX_CLKREG(0x8714)
+#define S5PC100_CLKDIV_IEM_L2   S5PC1XX_CLKREG(0x8718)
+#define S5PC100_CLKDIV_IEM_L1   S5PC1XX_CLKREG(0x871C)
+#define S5PC100_IEM_HPMCLK_DIV  S5PC1XX_CLKREG(0x8724)
+
+#define S5PC100_SWRESET         S5PC1XX_CLKREG(0x100000)
+#define S5PC100_OND_SWRESET             S5PC1XX_CLKREG(0x100008)
+#define S5PC100_GEN_CTRL                S5PC1XX_CLKREG(0x100100)
+#define S5PC100_GEN_STATUS              S5PC1XX_CLKREG(0x100104)
+#define S5PC100_MEM_SYS_CFG             S5PC1XX_CLKREG(0x100200)
+#define S5PC100_CAM_MUX_SEL             S5PC1XX_CLKREG(0x100300)
+#define S5PC100_MIXER_OUT_SEL   S5PC1XX_CLKREG(0x100304)
+#define S5PC100_LPMP_MODE_SEL   S5PC1XX_CLKREG(0x100308)
+#define S5PC100_MIPI_PHY_CON0   S5PC1XX_CLKREG(0x100400)
+#define S5PC100_MIPI_PHY_CON1   S5PC1XX_CLKREG(0x100414)
+#define S5PC100_HDMI_PHY_CON0   S5PC1XX_CLKREG(0x100420)
+
+#define S5PC100_CFG_WFI_CLEAN   (~(3<<5))
+#define S5PC100_CFG_WFI_IDLE    (1<<5)
+#define S5PC100_CFG_WFI_STOP    (2<<5)
+#define S5PC100_CFG_WFI_SLEEP   (3<<5)
+
+#define S5PC100_OTHER_SYS_INT   24
+#define S5PC100_OTHER_STA_TYPE  23
+#define STA_TYPE_EXPON          0
+#define STA_TYPE_SFR            1
+
+#define S5PC100_PWR_STA_EXP_SCALE       0
+#define S5PC100_PWR_STA_CNT             4
+
+#define S5PC100_PWR_STABLE_COUNT        85500
+
+#define S5PC100_SLEEP_CFG_OSC_EN        0
+
+/* OTHERS Resgister */
+#define S5PC100_OTHERS_USB_SIG_MASK     (1 << 16)
+#define S5PC100_OTHERS_MIPI_DPHY_EN             (1 << 28)
+
+/* MIPI D-PHY Control Register 0 */
+#define S5PC100_MIPI_PHY_CON0_M_RESETN  (1 << 1)
+#define S5PC100_MIPI_PHY_CON0_S_RESETN  (1 << 0)
+
+#endif /* _PLAT_REGS_CLOCK_H */
diff --git a/arch/arm/plat-s5pc1xx/include/plat/s5pc100.h b/arch/arm/plat-s5pc1xx/include/plat/s5pc100.h
new file mode 100644
index 000000000000..45e275131665
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/include/plat/s5pc100.h
@@ -0,0 +1,65 @@
+/* arch/arm/plat-s5pc1xx/include/plat/s5pc100.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *      Byungho Min <bhmin@samsung.com>
+ *
+ * Header file for s5pc100 cpu support
+ *
+ * Based on plat-s3c64xx/include/plat/s3c6400.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* Common init code for S5PC100 related SoCs */
+extern  int s5pc100_init(void);
+extern void s5pc100_map_io(void);
+extern void s5pc100_init_clocks(int xtal);
+extern  int s5pc100_register_baseclocks(unsigned long xtal);
+extern void s5pc100_init_irq(void);
+extern void s5pc100_init_io(struct map_desc *mach_desc, int size);
+extern void s5pc100_common_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+extern void s5pc100_register_clocks(void);
+extern void s5pc100_setup_clocks(void);
+extern struct sysdev_class s5pc100_sysclass;
+
+#define s5pc100_init_uarts s5pc100_common_init_uarts
+
+/* Some day, belows will be moved to plat-s5pc/include/plat/cpu.h */
+extern void s5pc1xx_init_irq(u32 *vic_valid, int num);
+extern void s5pc1xx_init_io(struct map_desc *mach_desc, int size);
+
+/* Some day, belows will be moved to plat-s5pc/include/plat/clock.h */
+extern struct clk clk_hpll;
+extern struct clk clk_hd0;
+extern struct clk clk_pd0;
+extern struct clk clk_54m;
+extern struct clk clk_dout_mpll2;
+extern void s5pc1xx_register_clocks(void);
+extern int s5pc1xx_sclk0_ctrl(struct clk *clk, int enable);
+extern int s5pc1xx_sclk1_ctrl(struct clk *clk, int enable);
+
+/* Some day, belows will be moved to plat-s5pc/include/plat/devs.h */
+extern struct s3c24xx_uart_resources s5pc1xx_uart_resources[];
+extern struct platform_device s3c_device_g2d;
+extern struct platform_device s3c_device_g3d;
+extern struct platform_device s3c_device_vpp;
+extern struct platform_device s3c_device_tvenc;
+extern struct platform_device s3c_device_tvscaler;
+extern struct platform_device s3c_device_rotator;
+extern struct platform_device s3c_device_jpeg;
+extern struct platform_device s3c_device_onenand;
+extern struct platform_device s3c_device_usb_otghcd;
+extern struct platform_device s3c_device_keypad;
+extern struct platform_device s3c_device_ts;
+extern struct platform_device s3c_device_g3d;
+extern struct platform_device s3c_device_smc911x;
+extern struct platform_device s3c_device_fimc0;
+extern struct platform_device s3c_device_fimc1;
+extern struct platform_device s3c_device_mfc;
+extern struct platform_device s3c_device_ac97;
+extern struct platform_device s3c_device_fimc0;
+extern struct platform_device s3c_device_fimc1;
+extern struct platform_device s3c_device_fimc2;
+
diff --git a/arch/arm/plat-s5pc1xx/irq.c b/arch/arm/plat-s5pc1xx/irq.c
new file mode 100644
index 000000000000..80d6dd942cb8
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/irq.c
@@ -0,0 +1,259 @@
+/* arch/arm/plat-s5pc1xx/irq.c
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *      Byungho Min <bhmin@samsung.com>
+ *
+ * S5PC1XX - Interrupt handling
+ *
+ * Based on plat-s3c64xx/irq.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+
+#include <asm/hardware/vic.h>
+
+#include <mach/map.h>
+#include <plat/regs-timer.h>
+#include <plat/cpu.h>
+
+/* Timer interrupt handling */
+
+static void s3c_irq_demux_timer(unsigned int base_irq, unsigned int sub_irq)
+{
+        generic_handle_irq(sub_irq);
+}
+
+static void s3c_irq_demux_timer0(unsigned int irq, struct irq_desc *desc)
+{
+        s3c_irq_demux_timer(irq, IRQ_TIMER0);
+}
+
+static void s3c_irq_demux_timer1(unsigned int irq, struct irq_desc *desc)
+{
+        s3c_irq_demux_timer(irq, IRQ_TIMER1);
+}
+
+static void s3c_irq_demux_timer2(unsigned int irq, struct irq_desc *desc)
+{
+        s3c_irq_demux_timer(irq, IRQ_TIMER2);
+}
+
+static void s3c_irq_demux_timer3(unsigned int irq, struct irq_desc *desc)
+{
+        s3c_irq_demux_timer(irq, IRQ_TIMER3);
+}
+
+static void s3c_irq_demux_timer4(unsigned int irq, struct irq_desc *desc)
+{
+        s3c_irq_demux_timer(irq, IRQ_TIMER4);
+}
+
+/* We assume the IRQ_TIMER0..IRQ_TIMER4 range is continuous. */
+
+static void s3c_irq_timer_mask(unsigned int irq)
+{
+        u32 reg = __raw_readl(S3C64XX_TINT_CSTAT);
+
+        reg &= 0x1f;  /* mask out pending interrupts */
+        reg &= ~(1 << (irq - IRQ_TIMER0));
+        __raw_writel(reg, S3C64XX_TINT_CSTAT);
+}
+
+static void s3c_irq_timer_unmask(unsigned int irq)
+{
+        u32 reg = __raw_readl(S3C64XX_TINT_CSTAT);
+
+        reg &= 0x1f;  /* mask out pending interrupts */
+        reg |= 1 << (irq - IRQ_TIMER0);
+        __raw_writel(reg, S3C64XX_TINT_CSTAT);
+}
+
+static void s3c_irq_timer_ack(unsigned int irq)
+{
+        u32 reg = __raw_readl(S3C64XX_TINT_CSTAT);
+
+        reg &= 0x1f;
+        reg |= (1 << 5) << (irq - IRQ_TIMER0);
+        __raw_writel(reg, S3C64XX_TINT_CSTAT);
+}
+
+static struct irq_chip s3c_irq_timer = {
+        .name           = "s3c-timer",
+        .mask           = s3c_irq_timer_mask,
+        .unmask         = s3c_irq_timer_unmask,
+        .ack            = s3c_irq_timer_ack,
+};
+
+struct uart_irq {
+        void __iomem    *regs;
+        unsigned int     base_irq;
+        unsigned int     parent_irq;
+};
+
+/* Note, we make use of the fact that the parent IRQs, IRQ_UART[0..3]
+ * are consecutive when looking up the interrupt in the demux routines.
+ */
+static struct uart_irq uart_irqs[] = {
+        [0] = {
+                .regs           = (void *)S3C_VA_UART0,
+                .base_irq       = IRQ_S3CUART_BASE0,
+                .parent_irq     = IRQ_UART0,
+        },
+        [1] = {
+                .regs           = (void *)S3C_VA_UART1,
+                .base_irq       = IRQ_S3CUART_BASE1,
+                .parent_irq     = IRQ_UART1,
+        },
+        [2] = {
+                .regs           = (void *)S3C_VA_UART2,
+                .base_irq       = IRQ_S3CUART_BASE2,
+                .parent_irq     = IRQ_UART2,
+        },
+        [3] = {
+                .regs           = (void *)S3C_VA_UART3,
+                .base_irq       = IRQ_S3CUART_BASE3,
+                .parent_irq     = IRQ_UART3,
+        },
+};
+
+static inline void __iomem *s3c_irq_uart_base(unsigned int irq)
+{
+        struct uart_irq *uirq = get_irq_chip_data(irq);
+        return uirq->regs;
+}
+
+static inline unsigned int s3c_irq_uart_bit(unsigned int irq)
+{
+        return irq & 3;
+}
+
+/* UART interrupt registers, not worth adding to seperate include header */
+#define S3C64XX_UINTP   0x30
+#define S3C64XX_UINTSP  0x34
+#define S3C64XX_UINTM   0x38
+
+static void s3c_irq_uart_mask(unsigned int irq)
+{
+        void __iomem *regs = s3c_irq_uart_base(irq);
+        unsigned int bit = s3c_irq_uart_bit(irq);
+        u32 reg;
+
+        reg = __raw_readl(regs + S3C64XX_UINTM);
+        reg |= (1 << bit);
+        __raw_writel(reg, regs + S3C64XX_UINTM);
+}
+
+static void s3c_irq_uart_maskack(unsigned int irq)
+{
+        void __iomem *regs = s3c_irq_uart_base(irq);
+        unsigned int bit = s3c_irq_uart_bit(irq);
+        u32 reg;
+
+        reg = __raw_readl(regs + S3C64XX_UINTM);
+        reg |= (1 << bit);
+        __raw_writel(reg, regs + S3C64XX_UINTM);
+        __raw_writel(1 << bit, regs + S3C64XX_UINTP);
+}
+
+static void s3c_irq_uart_unmask(unsigned int irq)
+{
+        void __iomem *regs = s3c_irq_uart_base(irq);
+        unsigned int bit = s3c_irq_uart_bit(irq);
+        u32 reg;
+
+        reg = __raw_readl(regs + S3C64XX_UINTM);
+        reg &= ~(1 << bit);
+        __raw_writel(reg, regs + S3C64XX_UINTM);
+}
+
+static void s3c_irq_uart_ack(unsigned int irq)
+{
+        void __iomem *regs = s3c_irq_uart_base(irq);
+        unsigned int bit = s3c_irq_uart_bit(irq);
+
+        __raw_writel(1 << bit, regs + S3C64XX_UINTP);
+}
+
+static void s3c_irq_demux_uart(unsigned int irq, struct irq_desc *desc)
+{
+        struct uart_irq *uirq = &uart_irqs[irq - IRQ_UART0];
+        u32 pend = __raw_readl(uirq->regs + S3C64XX_UINTP);
+        int base = uirq->base_irq;
+
+        if (pend & (1 << 0))
+                generic_handle_irq(base);
+        if (pend & (1 << 1))
+                generic_handle_irq(base + 1);
+        if (pend & (1 << 2))
+                generic_handle_irq(base + 2);
+        if (pend & (1 << 3))
+                generic_handle_irq(base + 3);
+}
+
+static struct irq_chip s3c_irq_uart = {
+        .name           = "s3c-uart",
+        .mask           = s3c_irq_uart_mask,
+        .unmask         = s3c_irq_uart_unmask,
+        .mask_ack       = s3c_irq_uart_maskack,
+        .ack            = s3c_irq_uart_ack,
+};
+
+static void __init s5pc1xx_uart_irq(struct uart_irq *uirq)
+{
+        void __iomem *reg_base = uirq->regs;
+        unsigned int irq;
+        int offs;
+
+        /* mask all interrupts at the start. */
+        __raw_writel(0xf, reg_base + S3C64XX_UINTM);
+
+        for (offs = 0; offs < 3; offs++) {
+                irq = uirq->base_irq + offs;
+
+                set_irq_chip(irq, &s3c_irq_uart);
+                set_irq_chip_data(irq, uirq);
+                set_irq_handler(irq, handle_level_irq);
+                set_irq_flags(irq, IRQF_VALID);
+        }
+
+        set_irq_chained_handler(uirq->parent_irq, s3c_irq_demux_uart);
+}
+
+void __init s5pc1xx_init_irq(u32 *vic_valid, int num)
+{
+        int i;
+        int uart, irq;
+
+        printk(KERN_DEBUG "%s: initialising interrupts\n", __func__);
+
+        /* initialise the pair of VICs */
+        for (i = 0; i < num; i++)
+                vic_init((void *)S5PC1XX_VA_VIC(i), S3C_IRQ(i * S3C_IRQ_OFFSET),
+                                vic_valid[i], 0);
+
+        /* add the timer sub-irqs */
+
+        set_irq_chained_handler(IRQ_TIMER0, s3c_irq_demux_timer0);
+        set_irq_chained_handler(IRQ_TIMER1, s3c_irq_demux_timer1);
+        set_irq_chained_handler(IRQ_TIMER2, s3c_irq_demux_timer2);
+        set_irq_chained_handler(IRQ_TIMER3, s3c_irq_demux_timer3);
+        set_irq_chained_handler(IRQ_TIMER4, s3c_irq_demux_timer4);
+
+        for (irq = IRQ_TIMER0; irq <= IRQ_TIMER4; irq++) {
+                set_irq_chip(irq, &s3c_irq_timer);
+                set_irq_handler(irq, handle_level_irq);
+                set_irq_flags(irq, IRQF_VALID);
+        }
+
+        for (uart = 0; uart < ARRAY_SIZE(uart_irqs); uart++)
+                s5pc1xx_uart_irq(&uart_irqs[uart]);
+}
+
+
diff --git a/arch/arm/plat-s5pc1xx/s5pc100-clock.c b/arch/arm/plat-s5pc1xx/s5pc100-clock.c
new file mode 100644
index 000000000000..6b24035172fa
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/s5pc100-clock.c
@@ -0,0 +1,1139 @@
+/* linux/arch/arm/plat-s5pc1xx/s5pc100-clock.c
+ *
+ * Copyright 2009 Samsung Electronics, Co.
+ *      Byungho Min <bhmin@samsung.com>
+ *
+ * S5PC100 based common clock support
+ *
+ * Based on plat-s3c64xx/s3c6400-clock.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/sysdev.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+#include <mach/map.h>
+
+#include <plat/cpu-freq.h>
+
+#include <plat/regs-clock.h>
+#include <plat/clock.h>
+#include <plat/cpu.h>
+#include <plat/pll.h>
+#include <plat/devs.h>
+#include <plat/s5pc100.h>
+
+/* fin_apll, fin_mpll and fin_epll are all the same clock, which we call
+ * ext_xtal_mux for want of an actual name from the manual.
+*/
+
+static struct clk clk_ext_xtal_mux = {
+        .name           = "ext_xtal",
+        .id             = -1,
+};
+
+#define clk_fin_apll clk_ext_xtal_mux
+#define clk_fin_mpll clk_ext_xtal_mux
+#define clk_fin_epll clk_ext_xtal_mux
+#define clk_fin_hpll clk_ext_xtal_mux
+
+#define clk_fout_mpll   clk_mpll
+
+struct clk_sources {
+        unsigned int    nr_sources;
+        struct clk      **sources;
+};
+
+struct clksrc_clk {
+        struct clk              clk;
+        unsigned int            mask;
+        unsigned int            shift;
+
+        struct clk_sources      *sources;
+
+        unsigned int            divider_shift;
+        void __iomem            *reg_divider;
+        void __iomem            *reg_source;
+};
+
+static int clk_default_setrate(struct clk *clk, unsigned long rate)
+{
+        clk->rate = rate;
+        return 1;
+}
+
+struct clk clk_27m = {
+        .name           = "clk_27m",
+        .id             = -1,
+        .rate           = 27000000,
+};
+
+static int clk_48m_ctrl(struct clk *clk, int enable)
+{
+        unsigned long flags;
+        u32 val;
+
+        /* can't rely on clock lock, this register has other usages */
+        local_irq_save(flags);
+
+        val = __raw_readl(S5PC1XX_CLK_SRC1);
+        if (enable)
+                val |= S5PC100_CLKSRC1_CLK48M_MASK;
+        else
+                val &= ~S5PC100_CLKSRC1_CLK48M_MASK;
+
+        __raw_writel(val, S5PC1XX_CLK_SRC1);
+        local_irq_restore(flags);
+
+        return 0;
+}
+
+struct clk clk_48m = {
+        .name           = "clk_48m",
+        .id             = -1,
+        .rate           = 48000000,
+        .enable         = clk_48m_ctrl,
+};
+
+struct clk clk_54m = {
+        .name           = "clk_54m",
+        .id             = -1,
+        .rate           = 54000000,
+};
+
+struct clk clk_hpll = {
+        .name           = "hpll",
+        .id             = -1,
+};
+
+struct clk clk_hd0 = {
+        .name           = "hclkd0",
+        .id             = -1,
+        .rate           = 0,
+        .parent         = NULL,
+        .ctrlbit        = 0,
+        .set_rate       = clk_default_setrate,
+};
+
+struct clk clk_pd0 = {
+        .name           = "pclkd0",
+        .id             = -1,
+        .rate           = 0,
+        .parent         = NULL,
+        .ctrlbit        = 0,
+        .set_rate       = clk_default_setrate,
+};
+
+static int s5pc1xx_clk_gate(void __iomem *reg,
+                                struct clk *clk,
+                                int enable)
+{
+        unsigned int ctrlbit = clk->ctrlbit;
+        u32 con;
+
+        con = __raw_readl(reg);
+
+        if (enable)
+                con |= ctrlbit;
+        else
+                con &= ~ctrlbit;
+
+        __raw_writel(con, reg);
+        return 0;
+}
+
+static int s5pc1xx_clk_d00_ctrl(struct clk *clk, int enable)
+{
+        return s5pc1xx_clk_gate(S5PC100_CLKGATE_D00, clk, enable);
+}
+
+static int s5pc1xx_clk_d01_ctrl(struct clk *clk, int enable)
+{
+        return s5pc1xx_clk_gate(S5PC100_CLKGATE_D01, clk, enable);
+}
+
+static int s5pc1xx_clk_d02_ctrl(struct clk *clk, int enable)
+{
+        return s5pc1xx_clk_gate(S5PC100_CLKGATE_D02, clk, enable);
+}
+
+static int s5pc1xx_clk_d10_ctrl(struct clk *clk, int enable)
+{
+        return s5pc1xx_clk_gate(S5PC100_CLKGATE_D10, clk, enable);
+}
+
+static int s5pc1xx_clk_d11_ctrl(struct clk *clk, int enable)
+{
+        return s5pc1xx_clk_gate(S5PC100_CLKGATE_D11, clk, enable);
+}
+
+static int s5pc1xx_clk_d12_ctrl(struct clk *clk, int enable)
+{
+        return s5pc1xx_clk_gate(S5PC100_CLKGATE_D12, clk, enable);
+}
+
+static int s5pc1xx_clk_d13_ctrl(struct clk *clk, int enable)
+{
+        return s5pc1xx_clk_gate(S5PC100_CLKGATE_D13, clk, enable);
+}
+
+static int s5pc1xx_clk_d14_ctrl(struct clk *clk, int enable)
+{
+        return s5pc1xx_clk_gate(S5PC100_CLKGATE_D14, clk, enable);
+}
+
+static int s5pc1xx_clk_d15_ctrl(struct clk *clk, int enable)
+{
+        return s5pc1xx_clk_gate(S5PC100_CLKGATE_D15, clk, enable);
+}
+
+static int s5pc1xx_clk_d20_ctrl(struct clk *clk, int enable)
+{
+        return s5pc1xx_clk_gate(S5PC100_CLKGATE_D20, clk, enable);
+}
+
+int s5pc1xx_sclk0_ctrl(struct clk *clk, int enable)
+{
+        return s5pc1xx_clk_gate(S5PC100_SCLKGATE0, clk, enable);
+}
+
+int s5pc1xx_sclk1_ctrl(struct clk *clk, int enable)
+{
+        return s5pc1xx_clk_gate(S5PC100_SCLKGATE1, clk, enable);
+}
+
+static struct clk init_clocks_disable[] = {
+        {
+                .name           = "dsi",
+                .id             = -1,
+                .parent         = &clk_p,
+                .enable         = s5pc1xx_clk_d11_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_D11_DSI,
+        }, {
+                .name           = "csi",
+                .id             = -1,
+                .parent         = &clk_h,
+                .enable         = s5pc1xx_clk_d11_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_D11_CSI,
+        }, {
+                .name           = "ccan0",
+                .id             = 0,
+                .parent         = &clk_p,
+                .enable         = s5pc1xx_clk_d14_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_D14_CCAN0,
+        }, {
+                .name           = "ccan1",
+                .id             = 1,
+                .parent         = &clk_p,
+                .enable         = s5pc1xx_clk_d14_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_D14_CCAN1,
+        }, {
+                .name           = "keypad",
+                .id             = -1,
+                .parent         = &clk_p,
+                .enable         = s5pc1xx_clk_d15_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_D15_KEYIF,
+        }, {
+                .name           = "hclkd2",
+                .id             = -1,
+                .parent         = NULL,
+                .enable         = s5pc1xx_clk_d20_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_D20_HCLKD2,
+        }, {
+                .name           = "iis-d2",
+                .id             = -1,
+                .parent         = NULL,
+                .enable         = s5pc1xx_clk_d20_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_D20_I2SD2,
+        }, {
+                .name           = "otg",
+                .id             = -1,
+                .parent         = &clk_h,
+                .enable         = s5pc1xx_clk_d10_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_D10_USBOTG,
+        },
+};
+
+static struct clk init_clocks[] = {
+        /* System1 (D0_0) devices */
+        {
+                .name           = "intc",
+                .id             = -1,
+                .parent         = &clk_hd0,
+                .enable         = s5pc1xx_clk_d00_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_D00_INTC,
+        }, {
+                .name           = "tzic",
+                .id             = -1,
+                .parent         = &clk_hd0,
+                .enable         = s5pc1xx_clk_d00_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_D00_TZIC,
+        }, {
+                .name           = "cf-ata",
+                .id             = -1,
+                .parent         = &clk_hd0,
+                .enable         = s5pc1xx_clk_d00_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_D00_CFCON,
+        }, {
+                .name           = "mdma",
+                .id             = -1,
+                .parent         = &clk_hd0,
+                .enable         = s5pc1xx_clk_d00_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_D00_MDMA,
+        }, {
+                .name           = "g2d",
+                .id             = -1,
+                .parent         = &clk_hd0,
+                .enable         = s5pc1xx_clk_d00_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_D00_G2D,
+        }, {
+                .name           = "secss",
+                .id             = -1,
+                .parent         = &clk_hd0,
+                .enable         = s5pc1xx_clk_d00_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_D00_SECSS,
+        }, {
+                .name           = "cssys",
+                .id             = -1,
+                .parent         = &clk_hd0,
+                .enable         = s5pc1xx_clk_d00_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_D00_CSSYS,
+        },
+
+        /* Memory (D0_1) devices */
+        {
+                .name           = "dmc",
+                .id             = -1,
+                .parent         = &clk_hd0,
+                .enable         = s5pc1xx_clk_d01_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_D01_DMC,
+        }, {
+                .name           = "sromc",
+                .id             = -1,
+                .parent         = &clk_hd0,
+                .enable         = s5pc1xx_clk_d01_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_D01_SROMC,
+        }, {
+                .name           = "onenand",
+                .id             = -1,
+                .parent         = &clk_hd0,
+                .enable         = s5pc1xx_clk_d01_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_D01_ONENAND,
+        }, {
+                .name           = "nand",
+                .id             = -1,
+                .parent         = &clk_hd0,
+                .enable         = s5pc1xx_clk_d01_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_D01_NFCON,
+        }, {
+                .name           = "intmem",
+                .id             = -1,
+                .parent         = &clk_hd0,
+                .enable         = s5pc1xx_clk_d01_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_D01_INTMEM,
+        }, {
+                .name           = "ebi",
+                .id             = -1,
+                .parent         = &clk_hd0,
+                .enable         = s5pc1xx_clk_d01_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_D01_EBI,
+        },
+
+        /* System2 (D0_2) devices */
+        {
+                .name           = "seckey",
+                .id             = -1,
+                .parent         = &clk_pd0,
+                .enable         = s5pc1xx_clk_d02_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_D02_SECKEY,
+        }, {
+                .name           = "sdm",
+                .id             = -1,
+                .parent         = &clk_hd0,
+                .enable         = s5pc1xx_clk_d02_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_D02_SDM,
+        },
+
+        /* File (D1_0) devices */
+        {
+                .name           = "pdma0",
+                .id             = -1,
+                .parent         = &clk_h,
+                .enable         = s5pc1xx_clk_d10_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_D10_PDMA0,
+        }, {
+                .name           = "pdma1",
+                .id             = -1,
+                .parent         = &clk_h,
+                .enable         = s5pc1xx_clk_d10_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_D10_PDMA1,
+        }, {
+                .name           = "usb-host",
+                .id             = -1,
+                .parent         = &clk_h,
+                .enable         = s5pc1xx_clk_d10_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_D10_USBHOST,
+        }, {
+                .name           = "modem",
+                .id             = -1,
+                .parent         = &clk_h,
+                .enable         = s5pc1xx_clk_d10_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_D10_MODEMIF,
+        }, {
+                .name           = "hsmmc",
+                .id             = 0,
+                .parent         = &clk_h,
+                .enable         = s5pc1xx_clk_d10_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_D10_HSMMC0,
+        }, {
+                .name           = "hsmmc",
+                .id             = 1,
+                .parent         = &clk_h,
+                .enable         = s5pc1xx_clk_d10_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_D10_HSMMC1,
+        }, {
+                .name           = "hsmmc",
+                .id             = 2,
+                .parent         = &clk_h,
+                .enable         = s5pc1xx_clk_d10_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_D10_HSMMC2,
+        },
+
+        /* Multimedia1 (D1_1) devices */
+        {
+                .name           = "lcd",
+                .id             = -1,
+                .parent         = &clk_h,
+                .enable         = s5pc1xx_clk_d11_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_D11_LCD,
+        }, {
+                .name           = "rotator",
+                .id             = -1,
+                .parent         = &clk_h,
+                .enable         = s5pc1xx_clk_d11_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_D11_ROTATOR,
+        }, {
+                .name           = "fimc",
+                .id             = 0,
+                .parent         = &clk_h,
+                .enable         = s5pc1xx_clk_d11_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_D11_FIMC0,
+        }, {
+                .name           = "fimc",
+                .id             = 1,
+                .parent         = &clk_h,
+                .enable         = s5pc1xx_clk_d11_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_D11_FIMC1,
+        }, {
+                .name           = "fimc",
+                .id             = 2,
+                .parent         = &clk_h,
+                .enable         = s5pc1xx_clk_d11_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_D11_FIMC2,
+        }, {
+                .name           = "jpeg",
+                .id             = -1,
+                .parent         = &clk_h,
+                .enable         = s5pc1xx_clk_d11_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_D11_JPEG,
+        }, {
+                .name           = "g3d",
+                .id             = -1,
+                .parent         = &clk_h,
+                .enable         = s5pc1xx_clk_d11_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_D11_G3D,
+        },
+
+        /* Multimedia2 (D1_2) devices */
+        {
+                .name           = "tv",
+                .id             = -1,
+                .parent         = &clk_h,
+                .enable         = s5pc1xx_clk_d12_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_D12_TV,
+        }, {
+                .name           = "vp",
+                .id             = -1,
+                .parent         = &clk_h,
+                .enable         = s5pc1xx_clk_d12_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_D12_VP,
+        }, {
+                .name           = "mixer",
+                .id             = -1,
+                .parent         = &clk_h,
+                .enable         = s5pc1xx_clk_d12_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_D12_MIXER,
+        }, {
+                .name           = "hdmi",
+                .id             = -1,
+                .parent         = &clk_h,
+                .enable         = s5pc1xx_clk_d12_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_D12_HDMI,
+        }, {
+                .name           = "mfc",
+                .id             = -1,
+                .parent         = &clk_h,
+                .enable         = s5pc1xx_clk_d12_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_D12_MFC,
+        },
+
+        /* System (D1_3) devices */
+        {
+                .name           = "chipid",
+                .id             = -1,
+                .parent         = &clk_p,
+                .enable         = s5pc1xx_clk_d13_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_D13_CHIPID,
+        }, {
+                .name           = "gpio",
+                .id             = -1,
+                .parent         = &clk_p,
+                .enable         = s5pc1xx_clk_d13_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_D13_GPIO,
+        }, {
+                .name           = "apc",
+                .id             = -1,
+                .parent         = &clk_p,
+                .enable         = s5pc1xx_clk_d13_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_D13_APC,
+        }, {
+                .name           = "iec",
+                .id             = -1,
+                .parent         = &clk_p,
+                .enable         = s5pc1xx_clk_d13_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_D13_IEC,
+        }, {
+                .name           = "timers",
+                .id             = -1,
+                .parent         = &clk_p,
+                .enable         = s5pc1xx_clk_d13_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_D13_PWM,
+        }, {
+                .name           = "systimer",
+                .id             = -1,
+                .parent         = &clk_p,
+                .enable         = s5pc1xx_clk_d13_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_D13_SYSTIMER,
+        }, {
+                .name           = "watchdog",
+                .id             = -1,
+                .parent         = &clk_p,
+                .enable         = s5pc1xx_clk_d13_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_D13_WDT,
+        }, {
+                .name           = "rtc",
+                .id             = -1,
+                .parent         = &clk_p,
+                .enable         = s5pc1xx_clk_d13_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_D13_RTC,
+        },
+
+        /* Connectivity (D1_4) devices */
+        {
+                .name           = "uart",
+                .id             = 0,
+                .parent         = &clk_p,
+                .enable         = s5pc1xx_clk_d14_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_D14_UART0,
+        }, {
+                .name           = "uart",
+                .id             = 1,
+                .parent         = &clk_p,
+                .enable         = s5pc1xx_clk_d14_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_D14_UART1,
+        }, {
+                .name           = "uart",
+                .id             = 2,
+                .parent         = &clk_p,
+                .enable         = s5pc1xx_clk_d14_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_D14_UART2,
+        }, {
+                .name           = "uart",
+                .id             = 3,
+                .parent         = &clk_p,
+                .enable         = s5pc1xx_clk_d14_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_D14_UART3,
+        }, {
+                .name           = "i2c",
+                .id             = -1,
+                .parent         = &clk_p,
+                .enable         = s5pc1xx_clk_d14_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_D14_IIC,
+        }, {
+                .name           = "hdmi-i2c",
+                .id             = -1,
+                .parent         = &clk_p,
+                .enable         = s5pc1xx_clk_d14_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_D14_HDMI_IIC,
+        }, {
+                .name           = "spi",
+                .id             = 0,
+                .parent         = &clk_p,
+                .enable         = s5pc1xx_clk_d14_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_D14_SPI0,
+        }, {
+                .name           = "spi",
+                .id             = 1,
+                .parent         = &clk_p,
+                .enable         = s5pc1xx_clk_d14_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_D14_SPI1,
+        }, {
+                .name           = "spi",
+                .id             = 2,
+                .parent         = &clk_p,
+                .enable         = s5pc1xx_clk_d14_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_D14_SPI2,
+        }, {
+                .name           = "irda",
+                .id             = -1,
+                .parent         = &clk_p,
+                .enable         = s5pc1xx_clk_d14_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_D14_IRDA,
+        }, {
+                .name           = "hsitx",
+                .id             = -1,
+                .parent         = &clk_p,
+                .enable         = s5pc1xx_clk_d14_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_D14_HSITX,
+        }, {
+                .name           = "hsirx",
+                .id             = -1,
+                .parent         = &clk_p,
+                .enable         = s5pc1xx_clk_d14_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_D14_HSIRX,
+        },
+
+        /* Audio (D1_5) devices */
+        {
+                .name           = "iis",
+                .id             = 0,
+                .parent         = &clk_p,
+                .enable         = s5pc1xx_clk_d15_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_D15_IIS0,
+        }, {
+                .name           = "iis",
+                .id             = 1,
+                .parent         = &clk_p,
+                .enable         = s5pc1xx_clk_d15_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_D15_IIS1,
+        }, {
+                .name           = "iis",
+                .id             = 2,
+                .parent         = &clk_p,
+                .enable         = s5pc1xx_clk_d15_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_D15_IIS2,
+        }, {
+                .name           = "ac97",
+                .id             = -1,
+                .parent         = &clk_p,
+                .enable         = s5pc1xx_clk_d15_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_D15_AC97,
+        }, {
+                .name           = "pcm",
+                .id             = 0,
+                .parent         = &clk_p,
+                .enable         = s5pc1xx_clk_d15_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_D15_PCM0,
+        }, {
+                .name           = "pcm",
+                .id             = 1,
+                .parent         = &clk_p,
+                .enable         = s5pc1xx_clk_d15_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_D15_PCM1,
+        }, {
+                .name           = "spdif",
+                .id             = -1,
+                .parent         = &clk_p,
+                .enable         = s5pc1xx_clk_d15_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_D15_SPDIF,
+        }, {
+                .name           = "adc",
+                .id             = -1,
+                .parent         = &clk_p,
+                .enable         = s5pc1xx_clk_d15_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_D15_TSADC,
+        }, {
+                .name           = "keyif",
+                .id             = -1,
+                .parent         = &clk_p,
+                .enable         = s5pc1xx_clk_d15_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_D15_KEYIF,
+        }, {
+                .name           = "cg",
+                .id             = -1,
+                .parent         = &clk_p,
+                .enable         = s5pc1xx_clk_d15_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_D15_CG,
+        },
+
+        /* Audio (D2_0) devices: all disabled */
+
+        /* Special Clocks 1 */
+        {
+                .name           = "sclk_hpm",
+                .id             = -1,
+                .parent         = NULL,
+                .enable         = s5pc1xx_sclk0_ctrl,
+                .ctrlbit        = S5PC1XX_CLKGATE_SCLK0_HPM,
+        }, {
+                .name           = "sclk_onenand",
+                .id             = -1,
+                .parent         = NULL,
+                .enable         = s5pc1xx_sclk0_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_SCLK0_ONENAND,
+        }, {
+                .name           = "sclk_spi_48",
+                .id             = 0,
+                .parent         = &clk_48m,
+                .enable         = s5pc1xx_sclk0_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_SCLK0_SPI0_48,
+        }, {
+                .name           = "sclk_spi_48",
+                .id             = 1,
+                .parent         = &clk_48m,
+                .enable         = s5pc1xx_sclk0_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_SCLK0_SPI1_48,
+        }, {
+                .name           = "sclk_spi_48",
+                .id             = 2,
+                .parent         = &clk_48m,
+                .enable         = s5pc1xx_sclk0_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_SCLK0_SPI2_48,
+        }, {
+                .name           = "sclk_mmc_48",
+                .id             = 0,
+                .parent         = &clk_48m,
+                .enable         = s5pc1xx_sclk0_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_SCLK0_MMC0_48,
+        }, {
+                .name           = "sclk_mmc_48",
+                .id             = 1,
+                .parent         = &clk_48m,
+                .enable         = s5pc1xx_sclk0_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_SCLK0_MMC1_48,
+        }, {
+                .name           = "sclk_mmc_48",
+                .id             = 2,
+                .parent         = &clk_48m,
+                .enable         = s5pc1xx_sclk0_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_SCLK0_MMC2_48,
+        },
+
+        /* Special Clocks 2 */
+        {
+                .name           = "sclk_tv_54",
+                .id             = -1,
+                .parent         = &clk_54m,
+                .enable         = s5pc1xx_sclk1_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_SCLK1_TV54,
+        }, {
+                .name           = "sclk_vdac_54",
+                .id             = -1,
+                .parent         = &clk_54m,
+                .enable         = s5pc1xx_sclk1_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_SCLK1_VDAC54,
+        }, {
+                .name           = "sclk_spdif",
+                .id             = -1,
+                .parent         = NULL,
+                .enable         = s5pc1xx_sclk1_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_SCLK1_SPDIF,
+        },
+};
+
+void __init s5pc1xx_register_clocks(void)
+{
+        struct clk *clkp;
+        int ret;
+        int ptr;
+
+        clkp = init_clocks;
+        for (ptr = 0; ptr < ARRAY_SIZE(init_clocks); ptr++, clkp++) {
+                ret = s3c24xx_register_clock(clkp);
+                if (ret < 0) {
+                        printk(KERN_ERR "Failed to register clock %s (%d)\n",
+                               clkp->name, ret);
+                }
+        }
+
+        clkp = init_clocks_disable;
+        for (ptr = 0; ptr < ARRAY_SIZE(init_clocks_disable); ptr++, clkp++) {
+
+                ret = s3c24xx_register_clock(clkp);
+                if (ret < 0) {
+                        printk(KERN_ERR "Failed to register clock %s (%d)\n",
+                               clkp->name, ret);
+                }
+
+                (clkp->enable)(clkp, 0);
+        }
+
+        s3c_pwmclk_init();
+}
+static struct clk clk_fout_apll = {
+        .name           = "fout_apll",
+        .id             = -1,
+};
+
+static struct clk *clk_src_apll_list[] = {
+        [0] = &clk_fin_apll,
+        [1] = &clk_fout_apll,
+};
+
+static struct clk_sources clk_src_apll = {
+        .sources        = clk_src_apll_list,
+        .nr_sources     = ARRAY_SIZE(clk_src_apll_list),
+};
+
+static struct clksrc_clk clk_mout_apll = {
+        .clk    = {
+                .name           = "mout_apll",
+                .id             = -1,
+        },
+        .shift          = S5PC1XX_CLKSRC0_APLL_SHIFT,
+        .mask           = S5PC1XX_CLKSRC0_APLL_MASK,
+        .sources        = &clk_src_apll,
+        .reg_source     = S5PC1XX_CLK_SRC0,
+};
+
+static struct clk clk_fout_epll = {
+        .name           = "fout_epll",
+        .id             = -1,
+};
+
+static struct clk *clk_src_epll_list[] = {
+        [0] = &clk_fin_epll,
+        [1] = &clk_fout_epll,
+};
+
+static struct clk_sources clk_src_epll = {
+        .sources        = clk_src_epll_list,
+        .nr_sources     = ARRAY_SIZE(clk_src_epll_list),
+};
+
+static struct clksrc_clk clk_mout_epll = {
+        .clk    = {
+                .name           = "mout_epll",
+                .id             = -1,
+        },
+        .shift          = S5PC1XX_CLKSRC0_EPLL_SHIFT,
+        .mask           = S5PC1XX_CLKSRC0_EPLL_MASK,
+        .sources        = &clk_src_epll,
+        .reg_source     = S5PC1XX_CLK_SRC0,
+};
+
+static struct clk *clk_src_mpll_list[] = {
+        [0] = &clk_fin_mpll,
+        [1] = &clk_fout_mpll,
+};
+
+static struct clk_sources clk_src_mpll = {
+        .sources        = clk_src_mpll_list,
+        .nr_sources     = ARRAY_SIZE(clk_src_mpll_list),
+};
+
+static struct clksrc_clk clk_mout_mpll = {
+        .clk = {
+                .name           = "mout_mpll",
+                .id             = -1,
+        },
+        .shift          = S5PC1XX_CLKSRC0_MPLL_SHIFT,
+        .mask           = S5PC1XX_CLKSRC0_MPLL_MASK,
+        .sources        = &clk_src_mpll,
+        .reg_source     = S5PC1XX_CLK_SRC0,
+};
+
+static unsigned long s5pc1xx_clk_doutmpll_get_rate(struct clk *clk)
+{
+        unsigned long rate = clk_get_rate(clk->parent);
+        unsigned long clkdiv;
+
+        printk(KERN_DEBUG "%s: parent is %ld\n", __func__, rate);
+
+        clkdiv = __raw_readl(S5PC1XX_CLK_DIV1) & S5PC100_CLKDIV1_MPLL_MASK;
+        rate /= (clkdiv >> S5PC100_CLKDIV1_MPLL_SHIFT) + 1;
+
+        return rate;
+}
+
+static struct clk clk_dout_mpll = {
+        .name           = "dout_mpll",
+        .id             = -1,
+        .parent         = &clk_mout_mpll.clk,
+        .get_rate       = s5pc1xx_clk_doutmpll_get_rate,
+};
+
+static unsigned long s5pc1xx_clk_doutmpll2_get_rate(struct clk *clk)
+{
+        unsigned long rate = clk_get_rate(clk->parent);
+        unsigned long clkdiv;
+
+        printk(KERN_DEBUG "%s: parent is %ld\n", __func__, rate);
+
+        clkdiv = __raw_readl(S5PC1XX_CLK_DIV1) & S5PC100_CLKDIV1_MPLL2_MASK;
+        rate /= (clkdiv >> S5PC100_CLKDIV1_MPLL2_SHIFT) + 1;
+
+        return rate;
+}
+
+struct clk clk_dout_mpll2 = {
+        .name           = "dout_mpll2",
+        .id             = -1,
+        .parent         = &clk_mout_mpll.clk,
+        .get_rate       = s5pc1xx_clk_doutmpll2_get_rate,
+};
+
+static struct clk *clkset_uart_list[] = {
+        &clk_mout_epll.clk,
+        &clk_dout_mpll,
+        NULL,
+        NULL
+};
+
+static struct clk_sources clkset_uart = {
+        .sources        = clkset_uart_list,
+        .nr_sources     = ARRAY_SIZE(clkset_uart_list),
+};
+
+static inline struct clksrc_clk *to_clksrc(struct clk *clk)
+{
+        return container_of(clk, struct clksrc_clk, clk);
+}
+
+static unsigned long s5pc1xx_getrate_clksrc(struct clk *clk)
+{
+        struct clksrc_clk *sclk = to_clksrc(clk);
+        unsigned long rate = clk_get_rate(clk->parent);
+        u32 clkdiv = __raw_readl(sclk->reg_divider);
+
+        clkdiv >>= sclk->divider_shift;
+        clkdiv &= 0xf;
+        clkdiv++;
+
+        rate /= clkdiv;
+        return rate;
+}
+
+static int s5pc1xx_setrate_clksrc(struct clk *clk, unsigned long rate)
+{
+        struct clksrc_clk *sclk = to_clksrc(clk);
+        void __iomem *reg = sclk->reg_divider;
+        unsigned int div;
+        u32 val;
+
+        rate = clk_round_rate(clk, rate);
+        div = clk_get_rate(clk->parent) / rate;
+        if (div > 16)
+                return -EINVAL;
+
+        val = __raw_readl(reg);
+        val &= ~(0xf << sclk->shift);
+        val |= (div - 1) << sclk->shift;
+        __raw_writel(val, reg);
+
+        return 0;
+}
+
+static int s5pc1xx_setparent_clksrc(struct clk *clk, struct clk *parent)
+{
+        struct clksrc_clk *sclk = to_clksrc(clk);
+        struct clk_sources *srcs = sclk->sources;
+        u32 clksrc = __raw_readl(sclk->reg_source);
+        int src_nr = -1;
+        int ptr;
+
+        for (ptr = 0; ptr < srcs->nr_sources; ptr++)
+                if (srcs->sources[ptr] == parent) {
+                        src_nr = ptr;
+                        break;
+                }
+
+        if (src_nr >= 0) {
+                clksrc &= ~sclk->mask;
+                clksrc |= src_nr << sclk->shift;
+
+                __raw_writel(clksrc, sclk->reg_source);
+                return 0;
+        }
+
+        return -EINVAL;
+}
+
+static unsigned long s5pc1xx_roundrate_clksrc(struct clk *clk,
+                                              unsigned long rate)
+{
+        unsigned long parent_rate = clk_get_rate(clk->parent);
+        int div;
+
+        if (rate > parent_rate)
+                rate = parent_rate;
+        else {
+                div = rate / parent_rate;
+
+                if (div == 0)
+                        div = 1;
+                if (div > 16)
+                        div = 16;
+
+                rate = parent_rate / div;
+        }
+
+        return rate;
+}
+
+static struct clksrc_clk clk_uart_uclk1 = {
+        .clk    = {
+                .name           = "uclk1",
+                .id             = -1,
+                .ctrlbit        = S5PC100_CLKGATE_SCLK0_UART,
+                .enable         = s5pc1xx_sclk0_ctrl,
+                .set_parent     = s5pc1xx_setparent_clksrc,
+                .get_rate       = s5pc1xx_getrate_clksrc,
+                .set_rate       = s5pc1xx_setrate_clksrc,
+                .round_rate     = s5pc1xx_roundrate_clksrc,
+        },
+        .shift          = S5PC100_CLKSRC1_UART_SHIFT,
+        .mask           = S5PC100_CLKSRC1_UART_MASK,
+        .sources        = &clkset_uart,
+        .divider_shift  = S5PC100_CLKDIV2_UART_SHIFT,
+        .reg_divider    = S5PC1XX_CLK_DIV2,
+        .reg_source     = S5PC1XX_CLK_SRC1,
+};
+
+/* Clock initialisation code */
+
+static struct clksrc_clk *init_parents[] = {
+        &clk_mout_apll,
+        &clk_mout_epll,
+        &clk_mout_mpll,
+        &clk_uart_uclk1,
+};
+
+static void __init_or_cpufreq s5pc1xx_set_clksrc(struct clksrc_clk *clk)
+{
+        struct clk_sources *srcs = clk->sources;
+        u32 clksrc = __raw_readl(clk->reg_source);
+
+        clksrc &= clk->mask;
+        clksrc >>= clk->shift;
+
+        if (clksrc > srcs->nr_sources || !srcs->sources[clksrc]) {
+                printk(KERN_ERR "%s: bad source %d\n",
+                       clk->clk.name, clksrc);
+                return;
+        }
+
+        clk->clk.parent = srcs->sources[clksrc];
+
+        printk(KERN_INFO "%s: source is %s (%d), rate is %ld\n",
+               clk->clk.name, clk->clk.parent->name, clksrc,
+               clk_get_rate(&clk->clk));
+}
+
+#define GET_DIV(clk, field) ((((clk) & field##_MASK) >> field##_SHIFT) + 1)
+
+void __init_or_cpufreq s5pc100_setup_clocks(void)
+{
+        struct clk *xtal_clk;
+        unsigned long xtal;
+        unsigned long armclk;
+        unsigned long hclkd0;
+        unsigned long hclk;
+        unsigned long pclkd0;
+        unsigned long pclk;
+        unsigned long apll;
+        unsigned long mpll;
+        unsigned long hpll;
+        unsigned long epll;
+        unsigned int ptr;
+        u32 clkdiv0, clkdiv1;
+
+        printk(KERN_DEBUG "%s: registering clocks\n", __func__);
+
+        clkdiv0 = __raw_readl(S5PC1XX_CLK_DIV0);
+        clkdiv1 = __raw_readl(S5PC1XX_CLK_DIV1);
+
+        printk(KERN_DEBUG "%s: clkdiv0 = %08x, clkdiv1 = %08x\n",
+                        __func__, clkdiv0, clkdiv1);
+
+        xtal_clk = clk_get(NULL, "xtal");
+        BUG_ON(IS_ERR(xtal_clk));
+
+        xtal = clk_get_rate(xtal_clk);
+        clk_put(xtal_clk);
+
+        printk(KERN_DEBUG "%s: xtal is %ld\n", __func__, xtal);
+
+        apll = s5pc1xx_get_pll(xtal, __raw_readl(S5PC1XX_APLL_CON));
+        mpll = s5pc1xx_get_pll(xtal, __raw_readl(S5PC1XX_MPLL_CON));
+        epll = s5pc1xx_get_pll(xtal, __raw_readl(S5PC1XX_EPLL_CON));
+        hpll = s5pc1xx_get_pll(xtal, __raw_readl(S5PC100_HPLL_CON));
+
+        printk(KERN_INFO "S5PC100: PLL settings, A=%ld, M=%ld, E=%ld, H=%ld\n",
+               apll, mpll, epll, hpll);
+
+        armclk = apll / GET_DIV(clkdiv0, S5PC1XX_CLKDIV0_APLL);
+        armclk = armclk / GET_DIV(clkdiv0, S5PC100_CLKDIV0_ARM);
+        hclkd0 = armclk / GET_DIV(clkdiv0, S5PC100_CLKDIV0_D0);
+        pclkd0 = hclkd0 / GET_DIV(clkdiv0, S5PC100_CLKDIV0_PCLKD0);
+        hclk = mpll / GET_DIV(clkdiv1, S5PC100_CLKDIV1_D1);
+        pclk = hclk / GET_DIV(clkdiv1, S5PC100_CLKDIV1_PCLKD1);
+
+        printk(KERN_INFO "S5PC100: ARMCLK=%ld, HCLKD0=%ld, PCLKD0=%ld, HCLK=%ld, PCLK=%ld\n",
+               armclk, hclkd0, pclkd0, hclk, pclk);
+
+        clk_fout_apll.rate = apll;
+        clk_fout_mpll.rate = mpll;
+        clk_fout_epll.rate = epll;
+        clk_fout_apll.rate = apll;
+
+        clk_h.rate = hclk;
+        clk_p.rate = pclk;
+
+        for (ptr = 0; ptr < ARRAY_SIZE(init_parents); ptr++)
+                s5pc1xx_set_clksrc(init_parents[ptr]);
+}
+
+static struct clk *clks[] __initdata = {
+        &clk_ext_xtal_mux,
+        &clk_mout_epll.clk,
+        &clk_fout_epll,
+        &clk_mout_mpll.clk,
+        &clk_dout_mpll,
+        &clk_uart_uclk1.clk,
+        &clk_ext,
+        &clk_epll,
+        &clk_27m,
+        &clk_48m,
+        &clk_54m,
+};
+
+void __init s5pc100_register_clocks(void)
+{
+        struct clk *clkp;
+        int ret;
+        int ptr;
+
+        for (ptr = 0; ptr < ARRAY_SIZE(clks); ptr++) {
+                clkp = clks[ptr];
+                ret = s3c24xx_register_clock(clkp);
+                if (ret < 0) {
+                        printk(KERN_ERR "Failed to register clock %s (%d)\n",
+                               clkp->name, ret);
+                }
+        }
+
+        clk_mpll.parent = &clk_mout_mpll.clk;
+        clk_epll.parent = &clk_mout_epll.clk;
+}
diff --git a/arch/arm/plat-s5pc1xx/s5pc100-init.c b/arch/arm/plat-s5pc1xx/s5pc100-init.c
new file mode 100644
index 000000000000..c58710884ceb
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/s5pc100-init.c
@@ -0,0 +1,27 @@
+/* linux/arch/arm/plat-s5pc1xx/s5pc100-init.c
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *      Byungho Min <bhmin@samsung.com>
+ *
+ * S5PC100 - CPU initialisation (common with other S5PC1XX chips)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
+
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/s5pc100.h>
+
+/* uart registration process */
+
+void __init s5pc100_common_init_uarts(struct s3c2410_uartcfg *cfg, int no)
+{
+        /* The driver name is s3c6400-uart to reuse s3c6400_serial_drv  */
+        s3c24xx_init_uartdevs("s3c6400-uart", s5pc1xx_uart_resources, cfg, no);
+}
diff --git a/arch/arm/plat-s5pc1xx/setup-i2c0.c b/arch/arm/plat-s5pc1xx/setup-i2c0.c
new file mode 100644
index 000000000000..3d00c025fffb
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/setup-i2c0.c
@@ -0,0 +1,25 @@
+/* linux/arch/arm/plat-s5pc1xx/setup-i2c0.c
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *      Byungho Min <bhmin@samsung.com>
+ *
+ * Base S5PC1XX I2C bus 0 gpio configuration
+ *
+ * Based on plat-s3c64xx/setup-i2c0.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+
+struct platform_device; /* don't need the contents */
+
+#include <plat/iic.h>
+
+void s3c_i2c0_cfg_gpio(struct platform_device *dev)
+{
+        /* Pin configuration would be needed */
+}
diff --git a/arch/arm/plat-s5pc1xx/setup-i2c1.c b/arch/arm/plat-s5pc1xx/setup-i2c1.c
new file mode 100644
index 000000000000..c8f3ca42f51d
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/setup-i2c1.c
@@ -0,0 +1,25 @@
+/* linux/arch/arm/plat-s3c64xx/setup-i2c1.c
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *      Byungho Min <bhmin@samsung.com>
+ *
+ * Base S5PC1XX I2C bus 1 gpio configuration
+ *
+ * Based on plat-s3c64xx/setup-i2c1.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+
+struct platform_device; /* don't need the contents */
+
+#include <plat/iic.h>
+
+void s3c_i2c1_cfg_gpio(struct platform_device *dev)
+{
+        /* Pin configuration would be needed */
+}
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 2d5016691d40..2e25b7a827d3 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -702,6 +702,23 @@ config SENSORS_SHT15
           This driver can also be built as a module.  If so, the module
           will be called sht15.
 
+config SENSORS_S3C
+        tristate "S3C24XX/S3C64XX Inbuilt ADC"
+        depends on ARCH_S3C2410 || ARCH_S3C64XX
+        help
+          If you say yes here you get support for the on-board ADCs of
+          the Samsung S3C24XX or S3C64XX series of SoC
+
+          This driver can also be built as a module. If so, the module
+          will be called s3c-hwmo.
+
+config SENSORS_S3C_RAW
+        bool "Include raw channel attributes in sysfs"
+        depends on SENSORS_S3C
+        help
+          Say Y here if you want to include raw copies of all the ADC
+          channels in sysfs.
+
 config SENSORS_SIS5595
         tristate "Silicon Integrated Systems Corp. SiS5595"
         depends on PCI
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index b793dce6bed5..7f239a247c33 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -76,6 +76,7 @@ obj-$(CONFIG_SENSORS_MAX6650)	+= max6650.o
 obj-$(CONFIG_SENSORS_PC87360)   += pc87360.o
 obj-$(CONFIG_SENSORS_PC87427)   += pc87427.o
 obj-$(CONFIG_SENSORS_PCF8591)   += pcf8591.o
+obj-$(CONFIG_SENSORS_S3C)       += s3c-hwmon.o
 obj-$(CONFIG_SENSORS_SHT15)     += sht15.o
 obj-$(CONFIG_SENSORS_SIS5595)   += sis5595.o
 obj-$(CONFIG_SENSORS_SMSC47B397)+= smsc47b397.o
diff --git a/drivers/hwmon/s3c-hwmon.c b/drivers/hwmon/s3c-hwmon.c
new file mode 100644
index 000000000000..3a524f2fe493
--- /dev/null
+++ b/drivers/hwmon/s3c-hwmon.c
@@ -0,0 +1,405 @@
+/* linux/drivers/hwmon/s3c-hwmon.c
+ *
+ * Copyright (C) 2005, 2008, 2009 Simtec Electronics
+ *      http://armlinux.simtec.co.uk/
+ *      Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C24XX/S3C64XX ADC hwmon support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+*/
+
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+
+#include <plat/adc.h>
+#include <plat/hwmon.h>
+
+struct s3c_hwmon_attr {
+        struct sensor_device_attribute  in;
+        struct sensor_device_attribute  label;
+        char                            in_name[12];
+        char                            label_name[12];
+};
+
+/**
+ * struct s3c_hwmon - ADC hwmon client information
+ * @lock: Access lock to serialise the conversions.
+ * @client: The client we registered with the S3C ADC core.
+ * @hwmon_dev: The hwmon device we created.
+ * @attr: The holders for the channel attributes.
+*/
+struct s3c_hwmon {
+        struct semaphore        lock;
+        struct s3c_adc_client   *client;
+        struct device           *hwmon_dev;
+
+        struct s3c_hwmon_attr   attrs[8];
+};
+
+/**
+ * s3c_hwmon_read_ch - read a value from a given adc channel.
+ * @dev: The device.
+ * @hwmon: Our state.
+ * @channel: The channel we're reading from.
+ *
+ * Read a value from the @channel with the proper locking and sleep until
+ * either the read completes or we timeout awaiting the ADC core to get
+ * back to us.
+ */
+static int s3c_hwmon_read_ch(struct device *dev,
+                             struct s3c_hwmon *hwmon, int channel)
+{
+        int ret;
+
+        ret = down_interruptible(&hwmon->lock);
+        if (ret < 0)
+                return ret;
+
+        dev_dbg(dev, "reading channel %d\n", channel);
+
+        ret = s3c_adc_read(hwmon->client, channel);
+        up(&hwmon->lock);
+
+        return ret;
+}
+
+#ifdef CONFIG_SENSORS_S3C_RAW
+/**
+ * s3c_hwmon_show_raw - show a conversion from the raw channel number.
+ * @dev: The device that the attribute belongs to.
+ * @attr: The attribute being read.
+ * @buf: The result buffer.
+ *
+ * This show deals with the raw attribute, registered for each possible
+ * ADC channel. This does a conversion and returns the raw (un-scaled)
+ * value returned from the hardware.
+ */
+static ssize_t s3c_hwmon_show_raw(struct device *dev,
+                                  struct device_attribute *attr, char *buf)
+{
+        struct s3c_hwmon *adc = platform_get_drvdata(to_platform_device(dev));
+        struct sensor_device_attribute *sa = to_sensor_dev_attr(attr);
+        int ret;
+
+        ret = s3c_hwmon_read_ch(dev, adc, sa->index);
+
+        return  (ret < 0) ? ret : snprintf(buf, PAGE_SIZE, "%d\n", ret);
+}
+
+#define DEF_ADC_ATTR(x) \
+        static SENSOR_DEVICE_ATTR(adc##x##_raw, S_IRUGO, s3c_hwmon_show_raw, NULL, x)
+
+DEF_ADC_ATTR(0);
+DEF_ADC_ATTR(1);
+DEF_ADC_ATTR(2);
+DEF_ADC_ATTR(3);
+DEF_ADC_ATTR(4);
+DEF_ADC_ATTR(5);
+DEF_ADC_ATTR(6);
+DEF_ADC_ATTR(7);
+
+static struct attribute *s3c_hwmon_attrs[9] = {
+        &sensor_dev_attr_adc0_raw.dev_attr.attr,
+        &sensor_dev_attr_adc1_raw.dev_attr.attr,
+        &sensor_dev_attr_adc2_raw.dev_attr.attr,
+        &sensor_dev_attr_adc3_raw.dev_attr.attr,
+        &sensor_dev_attr_adc4_raw.dev_attr.attr,
+        &sensor_dev_attr_adc5_raw.dev_attr.attr,
+        &sensor_dev_attr_adc6_raw.dev_attr.attr,
+        &sensor_dev_attr_adc7_raw.dev_attr.attr,
+        NULL,
+};
+
+static struct attribute_group s3c_hwmon_attrgroup = {
+        .attrs  = s3c_hwmon_attrs,
+};
+
+static inline int s3c_hwmon_add_raw(struct device *dev)
+{
+        return sysfs_create_group(&dev->kobj, &s3c_hwmon_attrgroup);
+}
+
+static inline void s3c_hwmon_remove_raw(struct device *dev)
+{
+        sysfs_remove_group(&dev->kobj, &s3c_hwmon_attrgroup);
+}
+
+#else
+
+static inline int s3c_hwmon_add_raw(struct device *dev) { return 0; }
+static inline void s3c_hwmon_remove_raw(struct device *dev) { }
+
+#endif /* CONFIG_SENSORS_S3C_RAW */
+
+/**
+ * s3c_hwmon_ch_show - show value of a given channel
+ * @dev: The device that the attribute belongs to.
+ * @attr: The attribute being read.
+ * @buf: The result buffer.
+ *
+ * Read a value from the ADC and scale it before returning it to the
+ * caller. The scale factor is gained from the channel configuration
+ * passed via the platform data when the device was registered.
+ */
+static ssize_t s3c_hwmon_ch_show(struct device *dev,
+                                 struct device_attribute *attr,
+                                 char *buf)
+{
+        struct sensor_device_attribute *sen_attr = to_sensor_dev_attr(attr);
+        struct s3c_hwmon *hwmon = platform_get_drvdata(to_platform_device(dev));
+        struct s3c_hwmon_pdata *pdata = dev->platform_data;
+        struct s3c_hwmon_chcfg *cfg;
+        int ret;
+
+        cfg = pdata->in[sen_attr->index];
+
+        ret = s3c_hwmon_read_ch(dev, hwmon, sen_attr->index);
+        if (ret < 0)
+                return ret;
+
+        ret *= cfg->mult;
+        ret = DIV_ROUND_CLOSEST(ret, cfg->div);
+
+        return snprintf(buf, PAGE_SIZE, "%d\n", ret);
+}
+
+/**
+ * s3c_hwmon_label_show - show label name of the given channel.
+ * @dev: The device that the attribute belongs to.
+ * @attr: The attribute being read.
+ * @buf: The result buffer.
+ *
+ * Return the label name of a given channel
+ */
+static ssize_t s3c_hwmon_label_show(struct device *dev,
+                                    struct device_attribute *attr,
+                                    char *buf)
+{
+        struct sensor_device_attribute *sen_attr = to_sensor_dev_attr(attr);
+        struct s3c_hwmon_pdata *pdata = dev->platform_data;
+        struct s3c_hwmon_chcfg *cfg;
+
+        cfg = pdata->in[sen_attr->index];
+
+        return snprintf(buf, PAGE_SIZE, "%s\n", cfg->name);
+}
+
+/**
+ * s3c_hwmon_create_attr - create hwmon attribute for given channel.
+ * @dev: The device to create the attribute on.
+ * @cfg: The channel configuration passed from the platform data.
+ * @channel: The ADC channel number to process.
+ *
+ * Create the scaled attribute for use with hwmon from the specified
+ * platform data in @pdata. The sysfs entry is handled by the routine
+ * s3c_hwmon_ch_show().
+ *
+ * The attribute name is taken from the configuration data if present
+ * otherwise the name is taken by concatenating in_ with the channel
+ * number.
+ */
+static int s3c_hwmon_create_attr(struct device *dev,
+                                 struct s3c_hwmon_chcfg *cfg,
+                                 struct s3c_hwmon_attr *attrs,
+                                 int channel)
+{
+        struct sensor_device_attribute *attr;
+        int ret;
+
+        snprintf(attrs->in_name, sizeof(attrs->in_name), "in%d_input", channel);
+
+        attr = &attrs->in;
+        attr->index = channel;
+        attr->dev_attr.attr.name  = attrs->in_name;
+        attr->dev_attr.attr.mode  = S_IRUGO;
+        attr->dev_attr.attr.owner = THIS_MODULE;
+        attr->dev_attr.show = s3c_hwmon_ch_show;
+
+        ret =  device_create_file(dev, &attr->dev_attr);
+        if (ret < 0) {
+                dev_err(dev, "failed to create input attribute\n");
+                return ret;
+        }
+
+        /* if this has a name, add a label */
+        if (cfg->name) {
+                snprintf(attrs->label_name, sizeof(attrs->label_name),
+                         "in%d_label", channel);
+
+                attr = &attrs->label;
+                attr->index = channel;
+                attr->dev_attr.attr.name  = attrs->label_name;
+                attr->dev_attr.attr.mode  = S_IRUGO;
+                attr->dev_attr.attr.owner = THIS_MODULE;
+                attr->dev_attr.show = s3c_hwmon_label_show;
+
+                ret = device_create_file(dev, &attr->dev_attr);
+                if (ret < 0) {
+                        device_remove_file(dev, &attrs->in.dev_attr);
+                        dev_err(dev, "failed to create label attribute\n");
+                }
+        }
+
+        return ret;
+}
+
+static void s3c_hwmon_remove_attr(struct device *dev,
+                                  struct s3c_hwmon_attr *attrs)
+{
+        device_remove_file(dev, &attrs->in.dev_attr);
+        device_remove_file(dev, &attrs->label.dev_attr);
+}
+
+/**
+ * s3c_hwmon_probe - device probe entry.
+ * @dev: The device being probed.
+*/
+static int __devinit s3c_hwmon_probe(struct platform_device *dev)
+{
+        struct s3c_hwmon_pdata *pdata = dev->dev.platform_data;
+        struct s3c_hwmon *hwmon;
+        int ret = 0;
+        int i;
+
+        if (!pdata) {
+                dev_err(&dev->dev, "no platform data supplied\n");
+                return -EINVAL;
+        }
+
+        hwmon = kzalloc(sizeof(struct s3c_hwmon), GFP_KERNEL);
+        if (hwmon == NULL) {
+                dev_err(&dev->dev, "no memory\n");
+                return -ENOMEM;
+        }
+
+        platform_set_drvdata(dev, hwmon);
+
+        init_MUTEX(&hwmon->lock);
+
+        /* Register with the core ADC driver. */
+
+        hwmon->client = s3c_adc_register(dev, NULL, NULL, 0);
+        if (IS_ERR(hwmon->client)) {
+                dev_err(&dev->dev, "cannot register adc\n");
+                ret = PTR_ERR(hwmon->client);
+                goto err_mem;
+        }
+
+        /* add attributes for our adc devices. */
+
+        ret = s3c_hwmon_add_raw(&dev->dev);
+        if (ret)
+                goto err_registered;
+
+        /* register with the hwmon core */
+
+        hwmon->hwmon_dev = hwmon_device_register(&dev->dev);
+        if (IS_ERR(hwmon->hwmon_dev)) {
+                dev_err(&dev->dev, "error registering with hwmon\n");
+                ret = PTR_ERR(hwmon->hwmon_dev);
+                goto err_raw_attribute;
+        }
+
+        for (i = 0; i < ARRAY_SIZE(pdata->in); i++) {
+                if (!pdata->in[i])
+                        continue;
+
+                if (pdata->in[i]->mult >= 0x10000)
+                        dev_warn(&dev->dev,
+                                 "channel %d multiplier too large\n",
+                                 i);
+
+                ret = s3c_hwmon_create_attr(&dev->dev, pdata->in[i],
+                                            &hwmon->attrs[i], i);
+                if (ret) {
+                        dev_err(&dev->dev,
+                                        "error creating channel %d\n", i);
+
+                        for (i--; i >= 0; i--)
+                                s3c_hwmon_remove_attr(&dev->dev,
+                                                              &hwmon->attrs[i]);
+
+                        goto err_hwmon_register;
+                }
+        }
+
+        return 0;
+
+ err_hwmon_register:
+        hwmon_device_unregister(hwmon->hwmon_dev);
+
+ err_raw_attribute:
+        s3c_hwmon_remove_raw(&dev->dev);
+
+ err_registered:
+        s3c_adc_release(hwmon->client);
+
+ err_mem:
+        kfree(hwmon);
+        return ret;
+}
+
+static int __devexit s3c_hwmon_remove(struct platform_device *dev)
+{
+        struct s3c_hwmon *hwmon = platform_get_drvdata(dev);
+        int i;
+
+        s3c_hwmon_remove_raw(&dev->dev);
+
+        for (i = 0; i < ARRAY_SIZE(hwmon->attrs); i++)
+                s3c_hwmon_remove_attr(&dev->dev, &hwmon->attrs[i]);
+
+        hwmon_device_unregister(hwmon->hwmon_dev);
+        s3c_adc_release(hwmon->client);
+
+        return 0;
+}
+
+static struct platform_driver s3c_hwmon_driver = {
+        .driver = {
+                .name           = "s3c-hwmon",
+                .owner          = THIS_MODULE,
+        },
+        .probe          = s3c_hwmon_probe,
+        .remove         = __devexit_p(s3c_hwmon_remove),
+};
+
+static int __init s3c_hwmon_init(void)
+{
+        return platform_driver_register(&s3c_hwmon_driver);
+}
+
+static void __exit s3c_hwmon_exit(void)
+{
+        platform_driver_unregister(&s3c_hwmon_driver);
+}
+
+module_init(s3c_hwmon_init);
+module_exit(s3c_hwmon_exit);
+
+MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
+MODULE_DESCRIPTION("S3C ADC HWMon driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:s3c-hwmon");
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 037c1e0b7c4c..cdd552d33a78 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -459,7 +459,7 @@ config SERIAL_SAMSUNG_UARTS
         int
         depends on ARM && PLAT_S3C
         default 2 if ARCH_S3C2400
-        default 4 if ARCH_S3C64XX || CPU_S3C2443
+        default 4 if ARCH_S5PC1XX || ARCH_S3C64XX || CPU_S3C2443
         default 3
         help
           Select the number of available UART ports for the Samsung S3C
@@ -533,6 +533,13 @@ config SERIAL_S3C6400
           Serial port support for the Samsung S3C6400 and S3C6410
           SoCs
 
+config SERIAL_S5PC100
+        tristate "Samsung S5PC100 Serial port support"
+        depends on SERIAL_SAMSUNG && CPU_S5PC100
+        default y
+        help
+          Serial port support for the Samsung S5PC100 SoCs
+
 config SERIAL_MAX3100
         tristate "MAX3100 support"
         depends on SPI
diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
index d5a29981c6c4..97f6fcc8b432 100644
--- a/drivers/serial/Makefile
+++ b/drivers/serial/Makefile
@@ -43,6 +43,7 @@ obj-$(CONFIG_SERIAL_S3C2412) += s3c2412.o
 obj-$(CONFIG_SERIAL_S3C2440) += s3c2440.o
 obj-$(CONFIG_SERIAL_S3C24A0) += s3c24a0.o
 obj-$(CONFIG_SERIAL_S3C6400) += s3c6400.o
+obj-$(CONFIG_SERIAL_S5PC100) += s3c6400.o
 obj-$(CONFIG_SERIAL_MAX3100) += max3100.o
 obj-$(CONFIG_SERIAL_IP22_ZILOG) += ip22zilog.o
 obj-$(CONFIG_SERIAL_MUX) += mux.o
diff --git a/include/linux/amba/pl093.h b/include/linux/amba/pl093.h
new file mode 100644
index 000000000000..2983e3671adb
--- /dev/null
+++ b/include/linux/amba/pl093.h
@@ -0,0 +1,80 @@
+/* linux/amba/pl093.h
+ *
+ * Copyright (c) 2008 Simtec Electronics
+ *      http://armlinux.simtec.co.uk/
+ *      Ben Dooks <ben@simtec.co.uk>
+ *
+ * AMBA PL093 SSMC (synchronous static memory controller)
+ *  See DDI0236.pdf (r0p4) for more details
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define SMB_BANK(x)     ((x) * 0x20) /* each bank control set is 0x20 apart */
+
+/* Offsets for SMBxxxxRy registers */
+
+#define SMBIDCYR        (0x00)
+#define SMBWSTRDR       (0x04)
+#define SMBWSTWRR       (0x08)
+#define SMBWSTOENR      (0x0C)
+#define SMBWSTWENR      (0x10)
+#define SMBCR           (0x14)
+#define SMBSR           (0x18)
+#define SMBWSTBRDR      (0x1C)
+
+/* Masks for SMB registers */
+#define IDCY_MASK       (0xf)
+#define WSTRD_MASK      (0xf)
+#define WSTWR_MASK      (0xf)
+#define WSTOEN_MASK     (0xf)
+#define WSTWEN_MASK     (0xf)
+
+/* Notes from datasheet:
+ *      WSTOEN <= WSTRD
+ *      WSTWEN <= WSTWR
+ *
+ * WSTOEN is not used with nWAIT
+ */
+
+/* SMBCR bit definitions */
+#define SMBCR_BIWRITEEN         (1 << 21)
+#define SMBCR_ADDRVALIDWRITEEN  (1 << 20)
+#define SMBCR_SYNCWRITE         (1 << 17)
+#define SMBCR_BMWRITE           (1 << 16)
+#define SMBCR_WRAPREAD          (1 << 14)
+#define SMBCR_BIREADEN          (1 << 13)
+#define SMBCR_ADDRVALIDREADEN   (1 << 12)
+#define SMBCR_SYNCREAD          (1 << 9)
+#define SMBCR_BMREAD            (1 << 8)
+#define SMBCR_SMBLSPOL          (1 << 6)
+#define SMBCR_WP                (1 << 3)
+#define SMBCR_WAITEN            (1 << 2)
+#define SMBCR_WAITPOL           (1 << 1)
+#define SMBCR_RBLE              (1 << 0)
+
+#define SMBCR_BURSTLENWRITE_MASK        (3 << 18)
+#define SMBCR_BURSTLENWRITE_4           (0 << 18)
+#define SMBCR_BURSTLENWRITE_8           (1 << 18)
+#define SMBCR_BURSTLENWRITE_RESERVED    (2 << 18)
+#define SMBCR_BURSTLENWRITE_CONTINUOUS  (3 << 18)
+
+#define SMBCR_BURSTLENREAD_MASK         (3 << 10)
+#define SMBCR_BURSTLENREAD_4            (0 << 10)
+#define SMBCR_BURSTLENREAD_8            (1 << 10)
+#define SMBCR_BURSTLENREAD_16           (2 << 10)
+#define SMBCR_BURSTLENREAD_CONTINUOUS   (3 << 10)
+
+#define SMBCR_MW_MASK                   (3 << 4)
+#define SMBCR_MW_8BIT                   (0 << 4)
+#define SMBCR_MW_16BIT                  (1 << 4)
+#define SMBCR_MW_M32BIT                 (2 << 4)
+
+/* SSMC status registers */
+#define SSMCCSR         (0x200)
+#define SSMCCR          (0x204)
+#define SSMCITCR        (0x208)
+#define SSMCITIP        (0x20C)
+#define SSMCITIOP       (0x210)
diff --git a/sound/soc/s3c24xx/s3c24xx-ac97.h b/sound/soc/s3c24xx/s3c24xx-ac97.h
index a96dcadf28b4..e96f941a810b 100644
--- a/sound/soc/s3c24xx/s3c24xx-ac97.h
+++ b/sound/soc/s3c24xx/s3c24xx-ac97.h
@@ -20,12 +20,6 @@
 #define AC_CMD_ADDR(x) (x << 16)
 #define AC_CMD_DATA(x) (x & 0xffff)
 
-#ifdef CONFIG_CPU_S3C2440
-#define IRQ_S3C244x_AC97 IRQ_S3C2440_AC97
-#else
-#define IRQ_S3C244x_AC97 IRQ_S3C2443_AC97
-#endif
-
 extern struct snd_soc_dai s3c2443_ac97_dai[];
 
 #endif /*S3C24XXAC97_H_*/