2 files changed, 57 insertions, 0 deletions

diff --git a/drivers/ide/pci/generic.c b/drivers/ide/pci/generic.c
index f82e82109728..2f962cfa3f7f 100644
--- a/drivers/ide/pci/generic.c
+++ b/drivers/ide/pci/generic.c
@@ -212,6 +212,9 @@ static int __devinit generic_init_one(struct pci_dev *dev, const struct pci_devi
             (!(PCI_FUNC(dev->devfn) & 1)))
                 goto out;
 
+        if (dev->vendor == PCI_VENDOR_ID_JMICRON && PCI_FUNC(dev->devfn) != 1)
+                goto out;
+
         pci_read_config_word(dev, PCI_COMMAND, &command);
         if (!(command & PCI_COMMAND_IO)) {
                 printk(KERN_INFO "Skipping disabled %s IDE controller.\n", d->name);
@@ -239,6 +242,11 @@ static struct pci_device_id generic_pci_tbl[] = {
         { PCI_VENDOR_ID_TOSHIBA,PCI_DEVICE_ID_TOSHIBA_PICCOLO_1,   PCI_ANY_ID, PCI_ANY_ID, 0, 0, 12},
         { PCI_VENDOR_ID_TOSHIBA,PCI_DEVICE_ID_TOSHIBA_PICCOLO_2,   PCI_ANY_ID, PCI_ANY_ID, 0, 0, 13},
         { PCI_VENDOR_ID_NETCELL,PCI_DEVICE_ID_REVOLUTION,          PCI_ANY_ID, PCI_ANY_ID, 0, 0, 14},
+        { PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB361,     PCI_ANY_ID, PCI_ANY_ID, 0, 0, 15},
+        { PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB363,     PCI_ANY_ID, PCI_ANY_ID, 0, 0, 16},
+        { PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB365,     PCI_ANY_ID, PCI_ANY_ID, 0, 0, 17},
+        { PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB366,     PCI_ANY_ID, PCI_ANY_ID, 0, 0, 18},
+        { PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB368,     PCI_ANY_ID, PCI_ANY_ID, 0, 0, 19},
         /* Must come last. If you add entries adjust this table appropriately and the init_one code */
         { PCI_ANY_ID,           PCI_ANY_ID,                        PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_STORAGE_IDE << 8, 0xFFFFFF00UL, 0},
         { 0, },
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index e9a57afa1a08..de3bbc88fb26 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -1175,6 +1175,55 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI,	PCI_DEVICE_ID_SI_962,		quirk_sis_96x_
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI,      PCI_DEVICE_ID_SI_963,           quirk_sis_96x_smbus );
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI,      PCI_DEVICE_ID_SI_LPC,           quirk_sis_96x_smbus );
 
+#if defined(CONFIG_SCSI_SATA) || defined(CONFIG_SCSI_SATA_MODULE)
+
+/*
+ *      If we are using libata we can drive this chip properly but must
+ *      do this early on to make the additional device appear during
+ *      the PCI scanning.
+ */
+
+static void __devinit quirk_jmicron_dualfn(struct pci_dev *pdev)
+{
+        u32 conf;
+        u8 hdr;
+
+        /* Only poke fn 0 */
+        if (PCI_FUNC(pdev->devfn))
+                return;
+
+        switch(pdev->device) {
+                case PCI_DEVICE_ID_JMICRON_JMB365:
+                case PCI_DEVICE_ID_JMICRON_JMB366:
+                        /* Redirect IDE second PATA port to the right spot */
+                        pci_read_config_dword(pdev, 0x80, &conf);
+                        conf |= (1 << 24);
+                        /* Fall through */
+                        pci_write_config_dword(pdev, 0x80, conf);
+                case PCI_DEVICE_ID_JMICRON_JMB361:
+                case PCI_DEVICE_ID_JMICRON_JMB363:
+                        pci_read_config_dword(pdev, 0x40, &conf);
+                        /* Enable dual function mode, AHCI on fn 0, IDE fn1 */
+                        /* Set the class codes correctly and then direct IDE 0 */
+                        conf &= ~0x000F0200;    /* Clear bit 9 and 16-19 */
+                        conf |=  0x00C20002;    /* Set bit 1, 17, 22, 23 */
+                        pci_write_config_dword(pdev, 0x40, conf);
+
+                        /* Reconfigure so that the PCI scanner discovers the
+                           device is now multifunction */
+
+                        pci_read_config_byte(pdev, PCI_HEADER_TYPE, &hdr);
+                        pdev->hdr_type = hdr & 0x7f;
+                        pdev->multifunction = !!(hdr & 0x80);
+
+                        break;
+        }
+}
+
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, quirk_jmicron_dualfn);
+
+#endif
+
 #ifdef CONFIG_X86_IO_APIC
 static void __init quirk_alder_ioapic(struct pci_dev *pdev)
 {