17 files changed, 42 insertions, 39 deletions

diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
index 59509c48d7e5..bd0cff3f808c 100644
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -154,5 +154,10 @@
                         #size-cells = <0>;
                         ti,hwmods = "i2c3";
                 };
+
+                wdt2: wdt@44e35000 {
+                        compatible = "ti,omap3-wdt";
+                        ti,hwmods = "wd_timer2";
+                };
         };
 };
diff --git a/arch/arm/boot/dts/twl6030.dtsi b/arch/arm/boot/dts/twl6030.dtsi
index 3b2f3510d7eb..d351b27d7213 100644
--- a/arch/arm/boot/dts/twl6030.dtsi
+++ b/arch/arm/boot/dts/twl6030.dtsi
@@ -66,6 +66,7 @@
 
         vcxio: regulator@8 {
                 compatible = "ti,twl6030-vcxio";
+                regulator-always-on;
         };
 
         vusb: regulator@9 {
@@ -74,10 +75,12 @@
 
         v1v8: regulator@10 {
                 compatible = "ti,twl6030-v1v8";
+                regulator-always-on;
         };
 
         v2v1: regulator@11 {
                 compatible = "ti,twl6030-v2v1";
+                regulator-always-on;
         };
 
         clk32kg: regulator@12 {
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index dd2db025f778..4a4d058ed146 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -69,6 +69,7 @@ config SOC_OMAP5
         select CPU_V7
         select ARM_GIC
         select HAVE_SMP
+        select ARM_CPU_SUSPEND if PM
 
 comment "OMAP Core Type"
         depends on ARCH_OMAP2
diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c
index 74915295482e..28214483aaba 100644
--- a/arch/arm/mach-omap2/board-igep0020.c
+++ b/arch/arm/mach-omap2/board-igep0020.c
@@ -554,6 +554,8 @@ static const struct usbhs_omap_board_data igep3_usbhs_bdata __initconst = {
 
 #ifdef CONFIG_OMAP_MUX
 static struct omap_board_mux board_mux[] __initdata = {
+        /* SMSC9221 LAN Controller ETH IRQ (GPIO_176) */
+        OMAP3_MUX(MCSPI1_CS2, OMAP_MUX_MODE4 | OMAP_PIN_INPUT),
         { .reg_offset = OMAP_MUX_TERMINATOR },
 };
 #endif
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index ef230a0eb5eb..0d362e9f9cb9 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -58,6 +58,7 @@
 #include "hsmmc.h"
 #include "common-board-devices.h"
 
+#define OMAP3_EVM_TS_GPIO       175
 #define OMAP3_EVM_EHCI_VBUS     22
 #define OMAP3_EVM_EHCI_SELECT   61
 
diff --git a/arch/arm/mach-omap2/common-board-devices.c b/arch/arm/mach-omap2/common-board-devices.c
index 14734746457c..c1875862679f 100644
--- a/arch/arm/mach-omap2/common-board-devices.c
+++ b/arch/arm/mach-omap2/common-board-devices.c
@@ -35,16 +35,6 @@ static struct omap2_mcspi_device_config ads7846_mcspi_config = {
         .turbo_mode     = 0,
 };
 
-/*
- * ADS7846 driver maybe request a gpio according to the value
- * of pdata->get_pendown_state, but we have done this. So set
- * get_pendown_state to avoid twice gpio requesting.
- */
-static int omap3_get_pendown_state(void)
-{
-        return !gpio_get_value(OMAP3_EVM_TS_GPIO);
-}
-
 static struct ads7846_platform_data ads7846_config = {
         .x_max                  = 0x0fff,
         .y_max                  = 0x0fff,
@@ -55,7 +45,6 @@ static struct ads7846_platform_data ads7846_config = {
         .debounce_rep           = 1,
         .gpio_pendown           = -EINVAL,
         .keep_vref_on           = 1,
-        .get_pendown_state      = &omap3_get_pendown_state,
 };
 
 static struct spi_board_info ads7846_spi_board_info __initdata = {
diff --git a/arch/arm/mach-omap2/common-board-devices.h b/arch/arm/mach-omap2/common-board-devices.h
index 4c4ef6a6166b..a0b4a42836ab 100644
--- a/arch/arm/mach-omap2/common-board-devices.h
+++ b/arch/arm/mach-omap2/common-board-devices.h
@@ -4,7 +4,6 @@
 #include "twl-common.h"
 
 #define NAND_BLOCK_SIZE SZ_128K
-#define OMAP3_EVM_TS_GPIO       175
 
 struct mtd_partition;
 struct ads7846_platform_data;
diff --git a/arch/arm/mach-omap2/mux.h b/arch/arm/mach-omap2/mux.h
index 471e62a74a16..76f9b3c2f586 100644
--- a/arch/arm/mach-omap2/mux.h
+++ b/arch/arm/mach-omap2/mux.h
@@ -127,7 +127,6 @@ struct omap_mux_partition {
  * @gpio:       GPIO number
  * @muxnames:   available signal modes for a ball
  * @balls:      available balls on the package
- * @partition:  mux partition
  */
 struct omap_mux {
         u16     reg_offset;
diff --git a/arch/arm/mach-omap2/opp4xxx_data.c b/arch/arm/mach-omap2/opp4xxx_data.c
index 2293ba27101b..c95415da23c2 100644
--- a/arch/arm/mach-omap2/opp4xxx_data.c
+++ b/arch/arm/mach-omap2/opp4xxx_data.c
@@ -94,7 +94,7 @@ int __init omap4_opp_init(void)
 {
         int r = -ENODEV;
 
-        if (!cpu_is_omap44xx())
+        if (!cpu_is_omap443x())
                 return r;
 
         r = omap_init_opp_table(omap44xx_opp_def_list,
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index e4fc88c65dbd..05bd8f02723f 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -272,21 +272,16 @@ void omap_sram_idle(void)
         per_next_state = pwrdm_read_next_pwrst(per_pwrdm);
         core_next_state = pwrdm_read_next_pwrst(core_pwrdm);
 
-        if (mpu_next_state < PWRDM_POWER_ON) {
-                pwrdm_pre_transition(mpu_pwrdm);
-                pwrdm_pre_transition(neon_pwrdm);
-        }
+        pwrdm_pre_transition(NULL);
 
         /* PER */
         if (per_next_state < PWRDM_POWER_ON) {
-                pwrdm_pre_transition(per_pwrdm);
                 per_going_off = (per_next_state == PWRDM_POWER_OFF) ? 1 : 0;
                 omap2_gpio_prepare_for_idle(per_going_off);
         }
 
         /* CORE */
         if (core_next_state < PWRDM_POWER_ON) {
-                pwrdm_pre_transition(core_pwrdm);
                 if (core_next_state == PWRDM_POWER_OFF) {
                         omap3_core_save_context();
                         omap3_cm_save_context();
@@ -339,20 +334,14 @@ void omap_sram_idle(void)
                         omap2_prm_clear_mod_reg_bits(OMAP3430_AUTO_OFF_MASK,
                                                OMAP3430_GR_MOD,
                                                OMAP3_PRM_VOLTCTRL_OFFSET);
-                pwrdm_post_transition(core_pwrdm);
         }
         omap3_intc_resume_idle();
 
+        pwrdm_post_transition(NULL);
+
         /* PER */
-        if (per_next_state < PWRDM_POWER_ON) {
+        if (per_next_state < PWRDM_POWER_ON)
                 omap2_gpio_resume_after_idle();
-                pwrdm_post_transition(per_pwrdm);
-        }
-
-        if (mpu_next_state < PWRDM_POWER_ON) {
-                pwrdm_post_transition(mpu_pwrdm);
-                pwrdm_post_transition(neon_pwrdm);
-        }
 }
 
 static void omap3_pm_idle(void)
diff --git a/arch/arm/mach-omap2/sleep44xx.S b/arch/arm/mach-omap2/sleep44xx.S
index 9f6b83d1b193..91e71d8f46f0 100644
--- a/arch/arm/mach-omap2/sleep44xx.S
+++ b/arch/arm/mach-omap2/sleep44xx.S
@@ -56,9 +56,13 @@ ppa_por_params:
  * The restore function pointer is stored at CPUx_WAKEUP_NS_PA_ADDR_OFFSET.
  * It returns to the caller for CPU INACTIVE and ON power states or in case
  * CPU failed to transition to targeted OFF/DORMANT state.
+ *
+ * omap4_finish_suspend() calls v7_flush_dcache_all() which doesn't save
+ * stack frame and it expects the caller to take care of it. Hence the entire
+ * stack frame is saved to avoid possible stack corruption.
  */
 ENTRY(omap4_finish_suspend)
-        stmfd   sp!, {lr}
+        stmfd   sp!, {r4-r12, lr}
         cmp     r0, #0x0
         beq     do_WFI                          @ No lowpower state, jump to WFI
 
@@ -226,7 +230,7 @@ scu_gp_clear:
 skip_scu_gp_clear:
         isb
         dsb
-        ldmfd   sp!, {pc}
+        ldmfd   sp!, {r4-r12, pc}
 ENDPROC(omap4_finish_suspend)
 
 /*
diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c
index de47f170ba50..db5ff6642375 100644
--- a/arch/arm/mach-omap2/twl-common.c
+++ b/arch/arm/mach-omap2/twl-common.c
@@ -67,6 +67,7 @@ void __init omap_pmic_init(int bus, u32 clkrate,
                            const char *pmic_type, int pmic_irq,
                            struct twl4030_platform_data *pmic_data)
 {
+        omap_mux_init_signal("sys_nirq", OMAP_PIN_INPUT_PULLUP | OMAP_PIN_OFF_WAKEUPENABLE);
         strncpy(pmic_i2c_board_info.type, pmic_type,
                 sizeof(pmic_i2c_board_info.type));
         pmic_i2c_board_info.irq = pmic_irq;
diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c
index 626ad8cad7a9..938b50a33439 100644
--- a/arch/arm/plat-omap/dmtimer.c
+++ b/arch/arm/plat-omap/dmtimer.c
@@ -189,6 +189,7 @@ struct omap_dm_timer *omap_dm_timer_request(void)
                 timer->reserved = 1;
                 break;
         }
+        spin_unlock_irqrestore(&dm_timer_lock, flags);
 
         if (timer) {
                 ret = omap_dm_timer_prepare(timer);
@@ -197,7 +198,6 @@ struct omap_dm_timer *omap_dm_timer_request(void)
                         timer = NULL;
                 }
         }
-        spin_unlock_irqrestore(&dm_timer_lock, flags);
 
         if (!timer)
                 pr_debug("%s: timer request failed!\n", __func__);
@@ -220,6 +220,7 @@ struct omap_dm_timer *omap_dm_timer_request_specific(int id)
                         break;
                 }
         }
+        spin_unlock_irqrestore(&dm_timer_lock, flags);
 
         if (timer) {
                 ret = omap_dm_timer_prepare(timer);
@@ -228,7 +229,6 @@ struct omap_dm_timer *omap_dm_timer_request_specific(int id)
                         timer = NULL;
                 }
         }
-        spin_unlock_irqrestore(&dm_timer_lock, flags);
 
         if (!timer)
                 pr_debug("%s: timer%d request failed!\n", __func__, id);
@@ -258,7 +258,7 @@ EXPORT_SYMBOL_GPL(omap_dm_timer_enable);
 
 void omap_dm_timer_disable(struct omap_dm_timer *timer)
 {
-        pm_runtime_put(&timer->pdev->dev);
+        pm_runtime_put_sync(&timer->pdev->dev);
 }
 EXPORT_SYMBOL_GPL(omap_dm_timer_disable);
 
diff --git a/arch/arm/plat-omap/include/plat/cpu.h b/arch/arm/plat-omap/include/plat/cpu.h
index 68b180edcfff..bb5d08a70dbc 100644
--- a/arch/arm/plat-omap/include/plat/cpu.h
+++ b/arch/arm/plat-omap/include/plat/cpu.h
@@ -372,7 +372,8 @@ IS_OMAP_TYPE(3430, 0x3430)
 #define cpu_class_is_omap1()    (cpu_is_omap7xx() || cpu_is_omap15xx() || \
                                 cpu_is_omap16xx())
 #define cpu_class_is_omap2()    (cpu_is_omap24xx() || cpu_is_omap34xx() || \
-                                cpu_is_omap44xx() || soc_is_omap54xx())
+                                cpu_is_omap44xx() || soc_is_omap54xx() || \
+                                soc_is_am33xx())
 
 /* Various silicon revisions for omap2 */
 #define OMAP242X_CLASS          0x24200024
diff --git a/arch/arm/plat-omap/include/plat/multi.h b/arch/arm/plat-omap/include/plat/multi.h
index 045e320f1067..324d31b14852 100644
--- a/arch/arm/plat-omap/include/plat/multi.h
+++ b/arch/arm/plat-omap/include/plat/multi.h
@@ -108,4 +108,13 @@
 # endif
 #endif
 
+#ifdef CONFIG_SOC_AM33XX
+# ifdef OMAP_NAME
+#  undef  MULTI_OMAP2
+#  define MULTI_OMAP2
+# else
+#  define OMAP_NAME am33xx
+# endif
+#endif
+
 #endif  /* __PLAT_OMAP_MULTI_H */
diff --git a/arch/arm/plat-omap/include/plat/uncompress.h b/arch/arm/plat-omap/include/plat/uncompress.h
index b8d19a136781..7f7b112acccb 100644
--- a/arch/arm/plat-omap/include/plat/uncompress.h
+++ b/arch/arm/plat-omap/include/plat/uncompress.h
@@ -110,7 +110,7 @@ static inline void flush(void)
         _DEBUG_LL_ENTRY(mach, AM33XX_UART##p##_BASE, OMAP_PORT_SHIFT,   \
                 AM33XXUART##p)
 
-static inline void __arch_decomp_setup(unsigned long arch_id)
+static inline void arch_decomp_setup(void)
 {
         int port = 0;
 
@@ -198,8 +198,6 @@ static inline void __arch_decomp_setup(unsigned long arch_id)
         } while (0);
 }
 
-#define arch_decomp_setup()     __arch_decomp_setup(arch_id)
-
 /*
  * nothing to do
  */
diff --git a/drivers/cpufreq/omap-cpufreq.c b/drivers/cpufreq/omap-cpufreq.c
index 17fa04d08be9..b47034e650a5 100644
--- a/drivers/cpufreq/omap-cpufreq.c
+++ b/drivers/cpufreq/omap-cpufreq.c
@@ -218,7 +218,7 @@ static int __cpuinit omap_cpu_init(struct cpufreq_policy *policy)
 
         policy->cur = policy->min = policy->max = omap_getspeed(policy->cpu);
 
-        if (atomic_inc_return(&freq_table_users) == 1)
+        if (!freq_table)
                 result = opp_init_cpufreq_table(mpu_dev, &freq_table);
 
         if (result) {
@@ -227,6 +227,8 @@ static int __cpuinit omap_cpu_init(struct cpufreq_policy *policy)
                 goto fail_ck;
         }
 
+        atomic_inc_return(&freq_table_users);
+
         result = cpufreq_frequency_table_cpuinfo(policy, freq_table);
         if (result)
                 goto fail_table;