diff options
-rw-r--r-- | drivers/w1/slaves/Kconfig | 7 | ||||
-rw-r--r-- | drivers/w1/slaves/Makefile | 1 | ||||
-rw-r--r-- | drivers/w1/slaves/w1_ds2408.c | 402 | ||||
-rw-r--r-- | drivers/w1/w1_family.h | 1 |
4 files changed, 411 insertions, 0 deletions
diff --git a/drivers/w1/slaves/Kconfig b/drivers/w1/slaves/Kconfig index f0c909625bd1..cd1b72411bd4 100644 --- a/drivers/w1/slaves/Kconfig +++ b/drivers/w1/slaves/Kconfig | |||
@@ -16,6 +16,13 @@ config W1_SLAVE_SMEM | |||
16 | Say Y here if you want to connect 1-wire | 16 | Say Y here if you want to connect 1-wire |
17 | simple 64bit memory rom(ds2401/ds2411/ds1990*) to your wire. | 17 | simple 64bit memory rom(ds2401/ds2411/ds1990*) to your wire. |
18 | 18 | ||
19 | config W1_SLAVE_DS2408 | ||
20 | tristate "8-Channel Addressable Switch (IO Expander) 0x29 family support (DS2408)" | ||
21 | help | ||
22 | Say Y here if you want to use a 1-wire | ||
23 | |||
24 | DS2408 8-Channel Addressable Switch device support | ||
25 | |||
19 | config W1_SLAVE_DS2423 | 26 | config W1_SLAVE_DS2423 |
20 | tristate "Counter 1-wire device (DS2423)" | 27 | tristate "Counter 1-wire device (DS2423)" |
21 | select CRC16 | 28 | select CRC16 |
diff --git a/drivers/w1/slaves/Makefile b/drivers/w1/slaves/Makefile index 3c76350a24f7..75e3913910bb 100644 --- a/drivers/w1/slaves/Makefile +++ b/drivers/w1/slaves/Makefile | |||
@@ -4,6 +4,7 @@ | |||
4 | 4 | ||
5 | obj-$(CONFIG_W1_SLAVE_THERM) += w1_therm.o | 5 | obj-$(CONFIG_W1_SLAVE_THERM) += w1_therm.o |
6 | obj-$(CONFIG_W1_SLAVE_SMEM) += w1_smem.o | 6 | obj-$(CONFIG_W1_SLAVE_SMEM) += w1_smem.o |
7 | obj-$(CONFIG_W1_SLAVE_DS2408) += w1_ds2408.o | ||
7 | obj-$(CONFIG_W1_SLAVE_DS2423) += w1_ds2423.o | 8 | obj-$(CONFIG_W1_SLAVE_DS2423) += w1_ds2423.o |
8 | obj-$(CONFIG_W1_SLAVE_DS2431) += w1_ds2431.o | 9 | obj-$(CONFIG_W1_SLAVE_DS2431) += w1_ds2431.o |
9 | obj-$(CONFIG_W1_SLAVE_DS2433) += w1_ds2433.o | 10 | obj-$(CONFIG_W1_SLAVE_DS2433) += w1_ds2433.o |
diff --git a/drivers/w1/slaves/w1_ds2408.c b/drivers/w1/slaves/w1_ds2408.c new file mode 100644 index 000000000000..c37781899d90 --- /dev/null +++ b/drivers/w1/slaves/w1_ds2408.c | |||
@@ -0,0 +1,402 @@ | |||
1 | /* | ||
2 | * w1_ds2408.c - w1 family 29 (DS2408) driver | ||
3 | * | ||
4 | * Copyright (c) 2010 Jean-Francois Dagenais <dagenaisj@sonatest.com> | ||
5 | * | ||
6 | * This source code is licensed under the GNU General Public License, | ||
7 | * Version 2. See the file COPYING for more details. | ||
8 | */ | ||
9 | |||
10 | #include <linux/kernel.h> | ||
11 | #include <linux/module.h> | ||
12 | #include <linux/moduleparam.h> | ||
13 | #include <linux/device.h> | ||
14 | #include <linux/types.h> | ||
15 | #include <linux/delay.h> | ||
16 | #include <linux/slab.h> | ||
17 | |||
18 | #include "../w1.h" | ||
19 | #include "../w1_int.h" | ||
20 | #include "../w1_family.h" | ||
21 | |||
22 | MODULE_LICENSE("GPL"); | ||
23 | MODULE_AUTHOR("Jean-Francois Dagenais <dagenaisj@sonatest.com>"); | ||
24 | MODULE_DESCRIPTION("w1 family 29 driver for DS2408 8 Pin IO"); | ||
25 | |||
26 | |||
27 | #define W1_F29_RETRIES 3 | ||
28 | |||
29 | #define W1_F29_REG_LOGIG_STATE 0x88 /* R */ | ||
30 | #define W1_F29_REG_OUTPUT_LATCH_STATE 0x89 /* R */ | ||
31 | #define W1_F29_REG_ACTIVITY_LATCH_STATE 0x8A /* R */ | ||
32 | #define W1_F29_REG_COND_SEARCH_SELECT_MASK 0x8B /* RW */ | ||
33 | #define W1_F29_REG_COND_SEARCH_POL_SELECT 0x8C /* RW */ | ||
34 | #define W1_F29_REG_CONTROL_AND_STATUS 0x8D /* RW */ | ||
35 | |||
36 | #define W1_F29_FUNC_READ_PIO_REGS 0xF0 | ||
37 | #define W1_F29_FUNC_CHANN_ACCESS_READ 0xF5 | ||
38 | #define W1_F29_FUNC_CHANN_ACCESS_WRITE 0x5A | ||
39 | /* also used to write the control/status reg (0x8D): */ | ||
40 | #define W1_F29_FUNC_WRITE_COND_SEARCH_REG 0xCC | ||
41 | #define W1_F29_FUNC_RESET_ACTIVITY_LATCHES 0xC3 | ||
42 | |||
43 | #define W1_F29_SUCCESS_CONFIRM_BYTE 0xAA | ||
44 | |||
45 | static int _read_reg(struct w1_slave *sl, u8 address, unsigned char* buf) | ||
46 | { | ||
47 | u8 wrbuf[3]; | ||
48 | dev_dbg(&sl->dev, | ||
49 | "Reading with slave: %p, reg addr: %0#4x, buff addr: %p", | ||
50 | sl, (unsigned int)address, buf); | ||
51 | |||
52 | if (!buf) | ||
53 | return -EINVAL; | ||
54 | |||
55 | mutex_lock(&sl->master->mutex); | ||
56 | dev_dbg(&sl->dev, "mutex locked"); | ||
57 | |||
58 | if (w1_reset_select_slave(sl)) { | ||
59 | mutex_unlock(&sl->master->mutex); | ||
60 | return -EIO; | ||
61 | } | ||
62 | |||
63 | wrbuf[0] = W1_F29_FUNC_READ_PIO_REGS; | ||
64 | wrbuf[1] = address; | ||
65 | wrbuf[2] = 0; | ||
66 | w1_write_block(sl->master, wrbuf, 3); | ||
67 | *buf = w1_read_8(sl->master); | ||
68 | |||
69 | mutex_unlock(&sl->master->mutex); | ||
70 | dev_dbg(&sl->dev, "mutex unlocked"); | ||
71 | return 1; | ||
72 | } | ||
73 | |||
74 | static ssize_t w1_f29_read_state( | ||
75 | struct file *filp, struct kobject *kobj, | ||
76 | struct bin_attribute *bin_attr, | ||
77 | char *buf, loff_t off, size_t count) | ||
78 | { | ||
79 | dev_dbg(&kobj_to_w1_slave(kobj)->dev, | ||
80 | "Reading %s kobj: %p, off: %0#10x, count: %zu, buff addr: %p", | ||
81 | bin_attr->attr.name, kobj, (unsigned int)off, count, buf); | ||
82 | if (count != 1 || off != 0) | ||
83 | return -EFAULT; | ||
84 | return _read_reg(kobj_to_w1_slave(kobj), W1_F29_REG_LOGIG_STATE, buf); | ||
85 | } | ||
86 | |||
87 | static ssize_t w1_f29_read_output( | ||
88 | struct file *filp, struct kobject *kobj, | ||
89 | struct bin_attribute *bin_attr, | ||
90 | char *buf, loff_t off, size_t count) | ||
91 | { | ||
92 | dev_dbg(&kobj_to_w1_slave(kobj)->dev, | ||
93 | "Reading %s kobj: %p, off: %0#10x, count: %zu, buff addr: %p", | ||
94 | bin_attr->attr.name, kobj, (unsigned int)off, count, buf); | ||
95 | if (count != 1 || off != 0) | ||
96 | return -EFAULT; | ||
97 | return _read_reg(kobj_to_w1_slave(kobj), | ||
98 | W1_F29_REG_OUTPUT_LATCH_STATE, buf); | ||
99 | } | ||
100 | |||
101 | static ssize_t w1_f29_read_activity( | ||
102 | struct file *filp, struct kobject *kobj, | ||
103 | struct bin_attribute *bin_attr, | ||
104 | char *buf, loff_t off, size_t count) | ||
105 | { | ||
106 | dev_dbg(&kobj_to_w1_slave(kobj)->dev, | ||
107 | "Reading %s kobj: %p, off: %0#10x, count: %zu, buff addr: %p", | ||
108 | bin_attr->attr.name, kobj, (unsigned int)off, count, buf); | ||
109 | if (count != 1 || off != 0) | ||
110 | return -EFAULT; | ||
111 | return _read_reg(kobj_to_w1_slave(kobj), | ||
112 | W1_F29_REG_ACTIVITY_LATCH_STATE, buf); | ||
113 | } | ||
114 | |||
115 | static ssize_t w1_f29_read_cond_search_mask( | ||
116 | struct file *filp, struct kobject *kobj, | ||
117 | struct bin_attribute *bin_attr, | ||
118 | char *buf, loff_t off, size_t count) | ||
119 | { | ||
120 | dev_dbg(&kobj_to_w1_slave(kobj)->dev, | ||
121 | "Reading %s kobj: %p, off: %0#10x, count: %zu, buff addr: %p", | ||
122 | bin_attr->attr.name, kobj, (unsigned int)off, count, buf); | ||
123 | if (count != 1 || off != 0) | ||
124 | return -EFAULT; | ||
125 | return _read_reg(kobj_to_w1_slave(kobj), | ||
126 | W1_F29_REG_COND_SEARCH_SELECT_MASK, buf); | ||
127 | } | ||
128 | |||
129 | static ssize_t w1_f29_read_cond_search_polarity( | ||
130 | struct file *filp, struct kobject *kobj, | ||
131 | struct bin_attribute *bin_attr, | ||
132 | char *buf, loff_t off, size_t count) | ||
133 | { | ||
134 | if (count != 1 || off != 0) | ||
135 | return -EFAULT; | ||
136 | return _read_reg(kobj_to_w1_slave(kobj), | ||
137 | W1_F29_REG_COND_SEARCH_POL_SELECT, buf); | ||
138 | } | ||
139 | |||
140 | static ssize_t w1_f29_read_status_control( | ||
141 | struct file *filp, struct kobject *kobj, | ||
142 | struct bin_attribute *bin_attr, | ||
143 | char *buf, loff_t off, size_t count) | ||
144 | { | ||
145 | if (count != 1 || off != 0) | ||
146 | return -EFAULT; | ||
147 | return _read_reg(kobj_to_w1_slave(kobj), | ||
148 | W1_F29_REG_CONTROL_AND_STATUS, buf); | ||
149 | } | ||
150 | |||
151 | |||
152 | |||
153 | |||
154 | static ssize_t w1_f29_write_output( | ||
155 | struct file *filp, struct kobject *kobj, | ||
156 | struct bin_attribute *bin_attr, | ||
157 | char *buf, loff_t off, size_t count) | ||
158 | { | ||
159 | struct w1_slave *sl = kobj_to_w1_slave(kobj); | ||
160 | u8 w1_buf[3]; | ||
161 | u8 readBack; | ||
162 | unsigned int retries = W1_F29_RETRIES; | ||
163 | |||
164 | if (count != 1 || off != 0) | ||
165 | return -EFAULT; | ||
166 | |||
167 | dev_dbg(&sl->dev, "locking mutex for write_output"); | ||
168 | mutex_lock(&sl->master->mutex); | ||
169 | dev_dbg(&sl->dev, "mutex locked"); | ||
170 | |||
171 | if (w1_reset_select_slave(sl)) | ||
172 | goto error; | ||
173 | |||
174 | while (retries--) { | ||
175 | w1_buf[0] = W1_F29_FUNC_CHANN_ACCESS_WRITE; | ||
176 | w1_buf[1] = *buf; | ||
177 | w1_buf[2] = ~(*buf); | ||
178 | w1_write_block(sl->master, w1_buf, 3); | ||
179 | |||
180 | readBack = w1_read_8(sl->master); | ||
181 | /* here the master could read another byte which | ||
182 | would be the PIO reg (the actual pin logic state) | ||
183 | since in this driver we don't know which pins are | ||
184 | in and outs, there's no value to read the state and | ||
185 | compare. with (*buf) so end this command abruptly: */ | ||
186 | if (w1_reset_resume_command(sl->master)) | ||
187 | goto error; | ||
188 | |||
189 | if (readBack != 0xAA) { | ||
190 | /* try again, the slave is ready for a command */ | ||
191 | continue; | ||
192 | } | ||
193 | |||
194 | /* go read back the output latches */ | ||
195 | /* (the direct effect of the write above) */ | ||
196 | w1_buf[0] = W1_F29_FUNC_READ_PIO_REGS; | ||
197 | w1_buf[1] = W1_F29_REG_OUTPUT_LATCH_STATE; | ||
198 | w1_buf[2] = 0; | ||
199 | w1_write_block(sl->master, w1_buf, 3); | ||
200 | /* read the result of the READ_PIO_REGS command */ | ||
201 | if (w1_read_8(sl->master) == *buf) { | ||
202 | /* success! */ | ||
203 | mutex_unlock(&sl->master->mutex); | ||
204 | dev_dbg(&sl->dev, | ||
205 | "mutex unlocked, retries:%d", retries); | ||
206 | return 1; | ||
207 | } | ||
208 | } | ||
209 | error: | ||
210 | mutex_unlock(&sl->master->mutex); | ||
211 | dev_dbg(&sl->dev, "mutex unlocked in error, retries:%d", retries); | ||
212 | |||
213 | return -EIO; | ||
214 | } | ||
215 | |||
216 | |||
217 | /** | ||
218 | * Writing to the activity file resets the activity latches. | ||
219 | */ | ||
220 | static ssize_t w1_f29_write_activity( | ||
221 | struct file *filp, struct kobject *kobj, | ||
222 | struct bin_attribute *bin_attr, | ||
223 | char *buf, loff_t off, size_t count) | ||
224 | { | ||
225 | struct w1_slave *sl = kobj_to_w1_slave(kobj); | ||
226 | unsigned int retries = W1_F29_RETRIES; | ||
227 | |||
228 | if (count != 1 || off != 0) | ||
229 | return -EFAULT; | ||
230 | |||
231 | mutex_lock(&sl->master->mutex); | ||
232 | |||
233 | if (w1_reset_select_slave(sl)) | ||
234 | goto error; | ||
235 | |||
236 | while (retries--) { | ||
237 | w1_write_8(sl->master, W1_F29_FUNC_RESET_ACTIVITY_LATCHES); | ||
238 | if (w1_read_8(sl->master) == W1_F29_SUCCESS_CONFIRM_BYTE) { | ||
239 | mutex_unlock(&sl->master->mutex); | ||
240 | return 1; | ||
241 | } | ||
242 | if (w1_reset_resume_command(sl->master)) | ||
243 | goto error; | ||
244 | } | ||
245 | |||
246 | error: | ||
247 | mutex_unlock(&sl->master->mutex); | ||
248 | return -EIO; | ||
249 | } | ||
250 | |||
251 | static ssize_t w1_f29_write_status_control( | ||
252 | struct file *filp, | ||
253 | struct kobject *kobj, | ||
254 | struct bin_attribute *bin_attr, | ||
255 | char *buf, | ||
256 | loff_t off, | ||
257 | size_t count) | ||
258 | { | ||
259 | struct w1_slave *sl = kobj_to_w1_slave(kobj); | ||
260 | u8 w1_buf[4]; | ||
261 | unsigned int retries = W1_F29_RETRIES; | ||
262 | |||
263 | if (count != 1 || off != 0) | ||
264 | return -EFAULT; | ||
265 | |||
266 | mutex_lock(&sl->master->mutex); | ||
267 | |||
268 | if (w1_reset_select_slave(sl)) | ||
269 | goto error; | ||
270 | |||
271 | while (retries--) { | ||
272 | w1_buf[0] = W1_F29_FUNC_WRITE_COND_SEARCH_REG; | ||
273 | w1_buf[1] = W1_F29_REG_CONTROL_AND_STATUS; | ||
274 | w1_buf[2] = 0; | ||
275 | w1_buf[3] = *buf; | ||
276 | |||
277 | w1_write_block(sl->master, w1_buf, 4); | ||
278 | if (w1_reset_resume_command(sl->master)) | ||
279 | goto error; | ||
280 | |||
281 | w1_buf[0] = W1_F29_FUNC_READ_PIO_REGS; | ||
282 | w1_buf[1] = W1_F29_REG_CONTROL_AND_STATUS; | ||
283 | w1_buf[2] = 0; | ||
284 | |||
285 | w1_write_block(sl->master, w1_buf, 3); | ||
286 | if (w1_read_8(sl->master) == *buf) { | ||
287 | /* success! */ | ||
288 | mutex_unlock(&sl->master->mutex); | ||
289 | return 1; | ||
290 | } | ||
291 | } | ||
292 | error: | ||
293 | mutex_unlock(&sl->master->mutex); | ||
294 | |||
295 | return -EIO; | ||
296 | } | ||
297 | |||
298 | |||
299 | |||
300 | #define NB_SYSFS_BIN_FILES 6 | ||
301 | static struct bin_attribute w1_f29_sysfs_bin_files[NB_SYSFS_BIN_FILES] = { | ||
302 | { | ||
303 | .attr = { | ||
304 | .name = "state", | ||
305 | .mode = S_IRUGO, | ||
306 | }, | ||
307 | .size = 1, | ||
308 | .read = w1_f29_read_state, | ||
309 | }, | ||
310 | { | ||
311 | .attr = { | ||
312 | .name = "output", | ||
313 | .mode = S_IRUGO | S_IWUSR | S_IWGRP, | ||
314 | }, | ||
315 | .size = 1, | ||
316 | .read = w1_f29_read_output, | ||
317 | .write = w1_f29_write_output, | ||
318 | }, | ||
319 | { | ||
320 | .attr = { | ||
321 | .name = "activity", | ||
322 | .mode = S_IRUGO, | ||
323 | }, | ||
324 | .size = 1, | ||
325 | .read = w1_f29_read_activity, | ||
326 | .write = w1_f29_write_activity, | ||
327 | }, | ||
328 | { | ||
329 | .attr = { | ||
330 | .name = "cond_search_mask", | ||
331 | .mode = S_IRUGO, | ||
332 | }, | ||
333 | .size = 1, | ||
334 | .read = w1_f29_read_cond_search_mask, | ||
335 | .write = 0, | ||
336 | }, | ||
337 | { | ||
338 | .attr = { | ||
339 | .name = "cond_search_polarity", | ||
340 | .mode = S_IRUGO, | ||
341 | }, | ||
342 | .size = 1, | ||
343 | .read = w1_f29_read_cond_search_polarity, | ||
344 | .write = 0, | ||
345 | }, | ||
346 | { | ||
347 | .attr = { | ||
348 | .name = "status_control", | ||
349 | .mode = S_IRUGO | S_IWUSR | S_IWGRP, | ||
350 | }, | ||
351 | .size = 1, | ||
352 | .read = w1_f29_read_status_control, | ||
353 | .write = w1_f29_write_status_control, | ||
354 | } | ||
355 | }; | ||
356 | |||
357 | static int w1_f29_add_slave(struct w1_slave *sl) | ||
358 | { | ||
359 | int err = 0; | ||
360 | int i; | ||
361 | |||
362 | for (i = 0; i < NB_SYSFS_BIN_FILES && !err; ++i) | ||
363 | err = sysfs_create_bin_file( | ||
364 | &sl->dev.kobj, | ||
365 | &(w1_f29_sysfs_bin_files[i])); | ||
366 | if (err) | ||
367 | while (--i >= 0) | ||
368 | sysfs_remove_bin_file(&sl->dev.kobj, | ||
369 | &(w1_f29_sysfs_bin_files[i])); | ||
370 | return err; | ||
371 | } | ||
372 | |||
373 | static void w1_f29_remove_slave(struct w1_slave *sl) | ||
374 | { | ||
375 | int i; | ||
376 | for (i = NB_SYSFS_BIN_FILES; i <= 0; --i) | ||
377 | sysfs_remove_bin_file(&sl->dev.kobj, | ||
378 | &(w1_f29_sysfs_bin_files[i])); | ||
379 | } | ||
380 | |||
381 | static struct w1_family_ops w1_f29_fops = { | ||
382 | .add_slave = w1_f29_add_slave, | ||
383 | .remove_slave = w1_f29_remove_slave, | ||
384 | }; | ||
385 | |||
386 | static struct w1_family w1_family_29 = { | ||
387 | .fid = W1_FAMILY_DS2408, | ||
388 | .fops = &w1_f29_fops, | ||
389 | }; | ||
390 | |||
391 | static int __init w1_f29_init(void) | ||
392 | { | ||
393 | return w1_register_family(&w1_family_29); | ||
394 | } | ||
395 | |||
396 | static void __exit w1_f29_exit(void) | ||
397 | { | ||
398 | w1_unregister_family(&w1_family_29); | ||
399 | } | ||
400 | |||
401 | module_init(w1_f29_init); | ||
402 | module_exit(w1_f29_exit); | ||
diff --git a/drivers/w1/w1_family.h b/drivers/w1/w1_family.h index f3b636d7cafe..75137590c3bc 100644 --- a/drivers/w1/w1_family.h +++ b/drivers/w1/w1_family.h | |||
@@ -34,6 +34,7 @@ | |||
34 | #define W1_THERM_DS1822 0x22 | 34 | #define W1_THERM_DS1822 0x22 |
35 | #define W1_EEPROM_DS2433 0x23 | 35 | #define W1_EEPROM_DS2433 0x23 |
36 | #define W1_THERM_DS18B20 0x28 | 36 | #define W1_THERM_DS18B20 0x28 |
37 | #define W1_FAMILY_DS2408 0x29 | ||
37 | #define W1_EEPROM_DS2431 0x2D | 38 | #define W1_EEPROM_DS2431 0x2D |
38 | #define W1_FAMILY_DS2760 0x30 | 39 | #define W1_FAMILY_DS2760 0x30 |
39 | 40 | ||