13 files changed, 162 insertions, 56 deletions

diff --git a/drivers/input/keyboard/atkbd.c b/drivers/input/keyboard/atkbd.c
index 56857d1e56d5..c27537be82ae 100644
--- a/drivers/input/keyboard/atkbd.c
+++ b/drivers/input/keyboard/atkbd.c
@@ -807,6 +807,8 @@ static int atkbd_activate(struct atkbd *atkbd)
 static void atkbd_cleanup(struct serio *serio)
 {
         struct atkbd *atkbd = serio_get_drvdata(serio);
+
+        atkbd_disable(atkbd);
         ps2_command(&atkbd->ps2dev, NULL, ATKBD_CMD_RESET_BAT);
 }
 
diff --git a/drivers/input/keyboard/pxa27x_keypad.c b/drivers/input/keyboard/pxa27x_keypad.c
index c7c9599b315d..6f1516f50750 100644
--- a/drivers/input/keyboard/pxa27x_keypad.c
+++ b/drivers/input/keyboard/pxa27x_keypad.c
@@ -138,6 +138,9 @@ static void pxa27x_keypad_build_keycode(struct pxa27x_keypad *keypad)
                 set_bit(code, input_dev->keybit);
         }
 
+        for (i = 0; i < pdata->direct_key_num; i++)
+                set_bit(pdata->direct_key_map[i], input_dev->keybit);
+
         keypad->rotary_up_key[0] = pdata->rotary0_up_key;
         keypad->rotary_up_key[1] = pdata->rotary1_up_key;
         keypad->rotary_down_key[0] = pdata->rotary0_down_key;
@@ -145,17 +148,21 @@ static void pxa27x_keypad_build_keycode(struct pxa27x_keypad *keypad)
         keypad->rotary_rel_code[0] = pdata->rotary0_rel_code;
         keypad->rotary_rel_code[1] = pdata->rotary1_rel_code;
 
-        if (pdata->rotary0_up_key && pdata->rotary0_down_key) {
-                set_bit(pdata->rotary0_up_key, input_dev->keybit);
-                set_bit(pdata->rotary0_down_key, input_dev->keybit);
-        } else
-                set_bit(pdata->rotary0_rel_code, input_dev->relbit);
-
-        if (pdata->rotary1_up_key && pdata->rotary1_down_key) {
-                set_bit(pdata->rotary1_up_key, input_dev->keybit);
-                set_bit(pdata->rotary1_down_key, input_dev->keybit);
-        } else
-                set_bit(pdata->rotary1_rel_code, input_dev->relbit);
+        if (pdata->enable_rotary0) {
+                if (pdata->rotary0_up_key && pdata->rotary0_down_key) {
+                        set_bit(pdata->rotary0_up_key, input_dev->keybit);
+                        set_bit(pdata->rotary0_down_key, input_dev->keybit);
+                } else
+                        set_bit(pdata->rotary0_rel_code, input_dev->relbit);
+        }
+
+        if (pdata->enable_rotary1) {
+                if (pdata->rotary1_up_key && pdata->rotary1_down_key) {
+                        set_bit(pdata->rotary1_up_key, input_dev->keybit);
+                        set_bit(pdata->rotary1_down_key, input_dev->keybit);
+                } else
+                        set_bit(pdata->rotary1_rel_code, input_dev->relbit);
+        }
 }
 
 static inline unsigned int lookup_matrix_keycode(
@@ -493,8 +500,13 @@ static int __devinit pxa27x_keypad_probe(struct platform_device *pdev)
         keypad->input_dev = input_dev;
         input_set_drvdata(input_dev, keypad);
 
-        input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP) |
-                BIT_MASK(EV_REL);
+        input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP);
+        if ((keypad->pdata->enable_rotary0 &&
+                        keypad->pdata->rotary0_rel_code) ||
+            (keypad->pdata->enable_rotary1 &&
+                        keypad->pdata->rotary1_rel_code)) {
+                input_dev->evbit[0] |= BIT_MASK(EV_REL);
+        }
 
         pxa27x_keypad_build_keycode(keypad);
         platform_set_drvdata(pdev, keypad);
diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
index 3ad8bd9f7543..432699d61c58 100644
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -15,7 +15,6 @@ if INPUT_MISC
 config INPUT_PCSPKR
         tristate "PC Speaker support"
         depends on PCSPKR_PLATFORM
-        depends on SND_PCSP=n
         help
           Say Y here if you want the standard PC Speaker to be used for
           bells and whistles.
diff --git a/drivers/input/misc/apanel.c b/drivers/input/misc/apanel.c
index 9531d8c7444f..d82f7f727f7a 100644
--- a/drivers/input/misc/apanel.c
+++ b/drivers/input/misc/apanel.c
@@ -20,7 +20,6 @@
 #include <linux/module.h>
 #include <linux/ioport.h>
 #include <linux/io.h>
-#include <linux/module.h>
 #include <linux/input-polldev.h>
 #include <linux/i2c.h>
 #include <linux/workqueue.h>
diff --git a/drivers/input/mouse/appletouch.c b/drivers/input/mouse/appletouch.c
index 6867c914b024..1f41ae94f26b 100644
--- a/drivers/input/mouse/appletouch.c
+++ b/drivers/input/mouse/appletouch.c
@@ -564,6 +564,21 @@ static void atp_close(struct input_dev *input)
         dev->open = 0;
 }
 
+static int atp_handle_geyser(struct atp *dev)
+{
+        struct usb_device *udev = dev->udev;
+
+        if (dev->type != ATP_FOUNTAIN) {
+                /* switch to raw sensor mode */
+                if (atp_geyser_init(udev))
+                        return -EIO;
+
+                printk(KERN_INFO "appletouch: Geyser mode initialized.\n");
+        }
+
+        return 0;
+}
+
 static int atp_probe(struct usb_interface *iface,
                      const struct usb_device_id *id)
 {
@@ -608,14 +623,6 @@ static int atp_probe(struct usb_interface *iface,
         else
                 dev->datalen = 64;
 
-        if (dev->type != ATP_FOUNTAIN) {
-                /* switch to raw sensor mode */
-                if (atp_geyser_init(udev))
-                        goto err_free_devs;
-
-                printk(KERN_INFO "appletouch: Geyser mode initialized.\n");
-        }
-
         dev->urb = usb_alloc_urb(0, GFP_KERNEL);
         if (!dev->urb)
                 goto err_free_devs;
@@ -629,6 +636,10 @@ static int atp_probe(struct usb_interface *iface,
                          usb_rcvintpipe(udev, int_in_endpointAddr),
                          dev->data, dev->datalen, atp_complete, dev, 1);
 
+        error = atp_handle_geyser(dev);
+        if (error)
+                goto err_free_buffer;
+
         usb_make_path(udev, dev->phys, sizeof(dev->phys));
         strlcat(dev->phys, "/input0", sizeof(dev->phys));
 
@@ -721,6 +732,20 @@ static void atp_disconnect(struct usb_interface *iface)
         printk(KERN_INFO "input: appletouch disconnected\n");
 }
 
+static int atp_recover(struct atp *dev)
+{
+        int error;
+
+        error = atp_handle_geyser(dev);
+        if (error)
+                return error;
+
+        if (dev->open && usb_submit_urb(dev->urb, GFP_ATOMIC))
+                return -EIO;
+
+        return 0;
+}
+
 static int atp_suspend(struct usb_interface *iface, pm_message_t message)
 {
         struct atp *dev = usb_get_intfdata(iface);
@@ -741,12 +766,20 @@ static int atp_resume(struct usb_interface *iface)
         return 0;
 }
 
+static int atp_reset_resume(struct usb_interface *iface)
+{
+        struct atp *dev = usb_get_intfdata(iface);
+
+        return atp_recover(dev);
+}
+
 static struct usb_driver atp_driver = {
         .name           = "appletouch",
         .probe          = atp_probe,
         .disconnect     = atp_disconnect,
         .suspend        = atp_suspend,
         .resume         = atp_resume,
+        .reset_resume   = atp_reset_resume,
         .id_table       = atp_table,
 };
 
diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h
index 2289e3a8f25c..9818359d26e2 100644
--- a/drivers/input/serio/i8042-x86ia64io.h
+++ b/drivers/input/serio/i8042-x86ia64io.h
@@ -193,6 +193,13 @@ static struct dmi_system_id __initdata i8042_dmi_nomux_table[] = {
                 },
         },
         {
+                .ident = "Fujitsu-Siemens Amilo Pro 2030",
+                .matches = {
+                        DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
+                        DMI_MATCH(DMI_PRODUCT_NAME, "AMILO PRO V2030"),
+                },
+        },
+        {
                 /*
                  * No data is coming from the touchscreen unless KBC
                  * is in legacy mode.
@@ -336,6 +343,13 @@ static struct dmi_system_id __initdata i8042_dmi_dritek_table[] = {
                 },
         },
         {
+                .ident = "Acer TravelMate 660",
+                .matches = {
+                        DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
+                        DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 660"),
+                },
+        },
+        {
                 .ident = "Acer TravelMate 2490",
                 .matches = {
                         DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
diff --git a/drivers/input/serio/i8042.c b/drivers/input/serio/i8042.c
index 65a74cfc187b..170f71ee5772 100644
--- a/drivers/input/serio/i8042.c
+++ b/drivers/input/serio/i8042.c
@@ -885,6 +885,20 @@ static long i8042_panic_blink(long count)
 
 #undef DELAY
 
+#ifdef CONFIG_X86
+static void i8042_dritek_enable(void)
+{
+        char param = 0x90;
+        int error;
+
+        error = i8042_command(&param, 0x1059);
+        if (error)
+                printk(KERN_WARNING
+                        "Failed to enable DRITEK extension: %d\n",
+                        error);
+}
+#endif
+
 #ifdef CONFIG_PM
 /*
  * Here we try to restore the original BIOS settings. We only want to
@@ -938,10 +952,20 @@ static int i8042_resume(struct platform_device *dev)
         i8042_ctr |= I8042_CTR_AUXDIS | I8042_CTR_KBDDIS;
         i8042_ctr &= ~(I8042_CTR_AUXINT | I8042_CTR_KBDINT);
         if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) {
-                printk(KERN_ERR "i8042: Can't write CTR to resume\n");
-                return -EIO;
+                printk(KERN_WARNING "i8042: Can't write CTR to resume, retrying...\n");
+                msleep(50);
+                if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) {
+                        printk(KERN_ERR "i8042: CTR write retry failed\n");
+                        return -EIO;
+                }
         }
 
+
+#ifdef CONFIG_X86
+        if (i8042_dritek)
+                i8042_dritek_enable();
+#endif
+
         if (i8042_mux_present) {
                 if (i8042_set_mux_mode(1, NULL) || i8042_enable_mux_ports())
                         printk(KERN_WARNING
@@ -1160,6 +1184,11 @@ static int __devinit i8042_probe(struct platform_device *dev)
         if (error)
                 return error;
 
+#ifdef CONFIG_X86
+        if (i8042_dritek)
+                i8042_dritek_enable();
+#endif
+
         if (!i8042_noaux) {
                 error = i8042_setup_aux();
                 if (error && error != -ENODEV && error != -EBUSY)
@@ -1171,14 +1200,6 @@ static int __devinit i8042_probe(struct platform_device *dev)
                 if (error)
                         goto out_fail;
         }
-#ifdef CONFIG_X86
-        if (i8042_dritek) {
-                char param = 0x90;
-                error = i8042_command(&param, 0x1059);
-                if (error)
-                        goto out_fail;
-        }
-#endif
 /*
  * Ok, everything is ready, let's register all serio ports
  */
diff --git a/drivers/input/tablet/gtco.c b/drivers/input/tablet/gtco.c
index c5a8661a1baa..1e748e46d12e 100644
--- a/drivers/input/tablet/gtco.c
+++ b/drivers/input/tablet/gtco.c
@@ -830,7 +830,7 @@ static int gtco_probe(struct usb_interface *usbinterface,
         struct gtco             *gtco;
         struct input_dev        *input_dev;
         struct hid_descriptor   *hid_desc;
-        char                    *report = NULL;
+        char                    *report;
         int                     result = 0, retry;
         int                     error;
         struct usb_endpoint_descriptor *endpoint;
@@ -916,12 +916,16 @@ static int gtco_probe(struct usb_interface *usbinterface,
                                          le16_to_cpu(hid_desc->wDescriptorLength),
                                          5000); /* 5 secs */
 
-                if (result == le16_to_cpu(hid_desc->wDescriptorLength))
+                dbg("usb_control_msg result: %d", result);
+                if (result == le16_to_cpu(hid_desc->wDescriptorLength)) {
+                        parse_hid_report_descriptor(gtco, report, result);
                         break;
+                }
         }
 
+        kfree(report);
+
         /* If we didn't get the report, fail */
-        dbg("usb_control_msg result: :%d", result);
         if (result != le16_to_cpu(hid_desc->wDescriptorLength)) {
                 err("Failed to get HID Report Descriptor of size: %d",
                     hid_desc->wDescriptorLength);
@@ -929,12 +933,6 @@ static int gtco_probe(struct usb_interface *usbinterface,
                 goto err_free_urb;
         }
 
-        /* Now we parse the report */
-        parse_hid_report_descriptor(gtco, report, result);
-
-        /* Now we delete it */
-        kfree(report);
-
         /* Create a device file node */
         usb_make_path(gtco->usbdev, gtco->usbpath, sizeof(gtco->usbpath));
         strlcat(gtco->usbpath, "/input0", sizeof(gtco->usbpath));
@@ -988,7 +986,6 @@ static int gtco_probe(struct usb_interface *usbinterface,
         usb_buffer_free(gtco->usbdev, REPORT_MAX_SIZE,
                         gtco->buffer, gtco->buf_dma);
  err_free_devs:
-        kfree(report);
         input_free_device(input_dev);
         kfree(gtco);
         return error;
diff --git a/drivers/input/touchscreen/wm9713.c b/drivers/input/touchscreen/wm9713.c
index 01278bd7e65c..838458792ea0 100644
--- a/drivers/input/touchscreen/wm9713.c
+++ b/drivers/input/touchscreen/wm9713.c
@@ -85,6 +85,15 @@ module_param(delay, int, 0);
 MODULE_PARM_DESC(delay, "Set adc sample delay.");
 
 /*
+ * Set five_wire = 1 to use a 5 wire touchscreen.
+ *
+ * NOTE: Five wire mode does not allow for readback of pressure.
+ */
+static int five_wire;
+module_param(five_wire, int, 0);
+MODULE_PARM_DESC(five_wire, "Set to '1' to use 5-wire touchscreen.");
+
+/*
  * Set adc mask function.
  *
  * Sources of glitch noise, such as signals driving an LCD display, may feed
@@ -162,6 +171,19 @@ static void wm9713_phy_init(struct wm97xx *wm)
                          64000 / rpu);
         }
 
+        /* Five wire panel? */
+        if (five_wire) {
+                dig3 |= WM9713_45W;
+                dev_info(wm->dev, "setting 5-wire touchscreen mode.");
+
+                if (pil) {
+                        dev_warn(wm->dev,
+                                 "Pressure measurement not supported in 5 "
+                                 "wire mode, disabling\n");
+                        pil = 0;
+                }
+        }
+
         /* touchpanel pressure */
         if (pil == 2) {
                 dig3 |= WM9712_PIL;
diff --git a/drivers/input/touchscreen/wm97xx-core.c b/drivers/input/touchscreen/wm97xx-core.c
index e9c7ea46b6e3..cdc24ad314e0 100644
--- a/drivers/input/touchscreen/wm97xx-core.c
+++ b/drivers/input/touchscreen/wm97xx-core.c
@@ -608,6 +608,17 @@ static int wm97xx_probe(struct device *dev)
                 goto alloc_err;
         }
 
+        /* set up physical characteristics */
+        wm->codec->phy_init(wm);
+
+        /* load gpio cache */
+        wm->gpio[0] = wm97xx_reg_read(wm, AC97_GPIO_CFG);
+        wm->gpio[1] = wm97xx_reg_read(wm, AC97_GPIO_POLARITY);
+        wm->gpio[2] = wm97xx_reg_read(wm, AC97_GPIO_STICKY);
+        wm->gpio[3] = wm97xx_reg_read(wm, AC97_GPIO_WAKEUP);
+        wm->gpio[4] = wm97xx_reg_read(wm, AC97_GPIO_STATUS);
+        wm->gpio[5] = wm97xx_reg_read(wm, AC97_MISC_AFE);
+
         wm->input_dev = input_allocate_device();
         if (wm->input_dev == NULL) {
                 ret = -ENOMEM;
@@ -616,6 +627,7 @@ static int wm97xx_probe(struct device *dev)
 
         /* set up touch configuration */
         wm->input_dev->name = "wm97xx touchscreen";
+        wm->input_dev->phys = "wm97xx";
         wm->input_dev->open = wm97xx_ts_input_open;
         wm->input_dev->close = wm97xx_ts_input_close;
         set_bit(EV_ABS, wm->input_dev->evbit);
@@ -634,17 +646,6 @@ static int wm97xx_probe(struct device *dev)
         if (ret < 0)
                 goto dev_alloc_err;
 
-        /* set up physical characteristics */
-        wm->codec->phy_init(wm);
-
-        /* load gpio cache */
-        wm->gpio[0] = wm97xx_reg_read(wm, AC97_GPIO_CFG);
-        wm->gpio[1] = wm97xx_reg_read(wm, AC97_GPIO_POLARITY);
-        wm->gpio[2] = wm97xx_reg_read(wm, AC97_GPIO_STICKY);
-        wm->gpio[3] = wm97xx_reg_read(wm, AC97_GPIO_WAKEUP);
-        wm->gpio[4] = wm97xx_reg_read(wm, AC97_GPIO_STATUS);
-        wm->gpio[5] = wm97xx_reg_read(wm, AC97_MISC_AFE);
-
         /* register our battery device */
         wm->battery_dev = platform_device_alloc("wm97xx-battery", -1);
         if (!wm->battery_dev) {
@@ -801,7 +802,7 @@ void wm97xx_unregister_mach_ops(struct wm97xx *wm)
 EXPORT_SYMBOL_GPL(wm97xx_unregister_mach_ops);
 
 static struct device_driver wm97xx_driver = {
-        .name =         "ac97",
+        .name =         "wm97xx-ts",
         .bus =          &ac97_bus_type,
         .owner =        THIS_MODULE,
         .probe =        wm97xx_probe,
diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c
index 2e2019390290..ec15f1dd1d0b 100644
--- a/drivers/usb/core/quirks.c
+++ b/drivers/usb/core/quirks.c
@@ -47,6 +47,9 @@ static const struct usb_device_id usb_quirk_list[] = {
         /* Edirol SD-20 */
         { USB_DEVICE(0x0582, 0x0027), .driver_info = USB_QUIRK_RESET_RESUME },
 
+        /* appletouch */
+        { USB_DEVICE(0x05ac, 0x021a), .driver_info = USB_QUIRK_RESET_RESUME },
+
         /* M-Systems Flash Disk Pioneers */
         { USB_DEVICE(0x08ec, 0x1000), .driver_info = USB_QUIRK_RESET_RESUME },
 
diff --git a/include/linux/input.h b/include/linux/input.h
index af9c6314153b..3e86b61d2e4c 100644
--- a/include/linux/input.h
+++ b/include/linux/input.h
@@ -639,7 +639,9 @@ struct input_absinfo {
 #define SW_LID                  0x00  /* set = lid shut */
 #define SW_TABLET_MODE          0x01  /* set = tablet mode */
 #define SW_HEADPHONE_INSERT     0x02  /* set = inserted */
-#define SW_RADIO                0x03  /* set = radio enabled */
+#define SW_RFKILL_ALL           0x03  /* rfkill master switch, type "any"
+                                         set = radio enabled */
+#define SW_RADIO                SW_RFKILL_ALL   /* deprecated */
 #define SW_MAX                  0x0f
 #define SW_CNT                  (SW_MAX+1)
 
diff --git a/include/linux/wm97xx.h b/include/linux/wm97xx.h
index 4d13732e9cf0..6f69968eab24 100644
--- a/include/linux/wm97xx.h
+++ b/include/linux/wm97xx.h
@@ -100,6 +100,7 @@
 #define WM9713_ADCSEL_Y         0x0004  /* Y measurement */
 #define WM9713_ADCSEL_PRES      0x0008  /* Pressure measurement */
 #define WM9713_COO              0x0001  /* enable coordinate mode */
+#define WM9713_45W              0x1000  /* set for 5 wire panel */
 #define WM9713_PDEN             0x0800  /* measure only when pen down */
 #define WM9713_ADCSEL_MASK      0x00fe  /* ADC selection mask */
 #define WM9713_WAIT             0x0200  /* coordinate wait */