aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--arch/mips/include/asm/pmc-sierra/msp71xx/msp_gpio_macros.h343
-rw-r--r--arch/mips/pmc-sierra/Kconfig10
-rw-r--r--arch/mips/pmc-sierra/msp71xx/Makefile2
-rw-r--r--arch/mips/pmc-sierra/msp71xx/msp_eth.c187
4 files changed, 541 insertions, 1 deletions
diff --git a/arch/mips/include/asm/pmc-sierra/msp71xx/msp_gpio_macros.h b/arch/mips/include/asm/pmc-sierra/msp71xx/msp_gpio_macros.h
new file mode 100644
index 000000000000..156f320c69e7
--- /dev/null
+++ b/arch/mips/include/asm/pmc-sierra/msp71xx/msp_gpio_macros.h
@@ -0,0 +1,343 @@
1/*
2 *
3 * Macros for external SMP-safe access to the PMC MSP71xx reference
4 * board GPIO pins
5 *
6 * Copyright 2010 PMC-Sierra, Inc.
7 *
8 * This program is free software; you can redistribute it and/or modify it
9 * under the terms of the GNU General Public License as published by the
10 * Free Software Foundation; either version 2 of the License, or (at your
11 * option) any later version.
12 *
13 * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
14 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
15 * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
16 * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
17 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
18 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
19 * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
20 * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
21 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
22 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
23 *
24 * You should have received a copy of the GNU General Public License along
25 * with this program; if not, write to the Free Software Foundation, Inc.,
26 * 675 Mass Ave, Cambridge, MA 02139, USA.
27 */
28
29#ifndef __MSP_GPIO_MACROS_H__
30#define __MSP_GPIO_MACROS_H__
31
32#include <msp_regops.h>
33#include <msp_regs.h>
34
35#ifdef CONFIG_PMC_MSP7120_GW
36#define MSP_NUM_GPIOS 20
37#else
38#define MSP_NUM_GPIOS 28
39#endif
40
41/* -- GPIO Enumerations -- */
42enum msp_gpio_data {
43 MSP_GPIO_LO = 0,
44 MSP_GPIO_HI = 1,
45 MSP_GPIO_NONE, /* Special - Means pin is out of range */
46 MSP_GPIO_TOGGLE, /* Special - Sets pin to opposite */
47};
48
49enum msp_gpio_mode {
50 MSP_GPIO_INPUT = 0x0,
51 /* MSP_GPIO_ INTERRUPT = 0x1, Not supported yet */
52 MSP_GPIO_UART_INPUT = 0x2, /* Only GPIO 4 or 5 */
53 MSP_GPIO_OUTPUT = 0x8,
54 MSP_GPIO_UART_OUTPUT = 0x9, /* Only GPIO 2 or 3 */
55 MSP_GPIO_PERIF_TIMERA = 0x9, /* Only GPIO 0 or 1 */
56 MSP_GPIO_PERIF_TIMERB = 0xa, /* Only GPIO 0 or 1 */
57 MSP_GPIO_UNKNOWN = 0xb, /* No such GPIO or mode */
58};
59
60/* -- Static Tables -- */
61
62/* Maps pins to data register */
63static volatile u32 * const MSP_GPIO_DATA_REGISTER[] = {
64 /* GPIO 0 and 1 on the first register */
65 GPIO_DATA1_REG, GPIO_DATA1_REG,
66 /* GPIO 2, 3, 4, and 5 on the second register */
67 GPIO_DATA2_REG, GPIO_DATA2_REG, GPIO_DATA2_REG, GPIO_DATA2_REG,
68 /* GPIO 6, 7, 8, and 9 on the third register */
69 GPIO_DATA3_REG, GPIO_DATA3_REG, GPIO_DATA3_REG, GPIO_DATA3_REG,
70 /* GPIO 10, 11, 12, 13, 14, and 15 on the fourth register */
71 GPIO_DATA4_REG, GPIO_DATA4_REG, GPIO_DATA4_REG, GPIO_DATA4_REG,
72 GPIO_DATA4_REG, GPIO_DATA4_REG,
73 /* GPIO 16 - 23 on the first strange EXTENDED register */
74 EXTENDED_GPIO1_REG, EXTENDED_GPIO1_REG, EXTENDED_GPIO1_REG,
75 EXTENDED_GPIO1_REG, EXTENDED_GPIO1_REG, EXTENDED_GPIO1_REG,
76 EXTENDED_GPIO1_REG, EXTENDED_GPIO1_REG,
77 /* GPIO 24 - 27 on the second strange EXTENDED register */
78 EXTENDED_GPIO2_REG, EXTENDED_GPIO2_REG, EXTENDED_GPIO2_REG,
79 EXTENDED_GPIO2_REG,
80};
81
82/* Maps pins to mode register */
83static volatile u32 * const MSP_GPIO_MODE_REGISTER[] = {
84 /* GPIO 0 and 1 on the first register */
85 GPIO_CFG1_REG, GPIO_CFG1_REG,
86 /* GPIO 2, 3, 4, and 5 on the second register */
87 GPIO_CFG2_REG, GPIO_CFG2_REG, GPIO_CFG2_REG, GPIO_CFG2_REG,
88 /* GPIO 6, 7, 8, and 9 on the third register */
89 GPIO_CFG3_REG, GPIO_CFG3_REG, GPIO_CFG3_REG, GPIO_CFG3_REG,
90 /* GPIO 10, 11, 12, 13, 14, and 15 on the fourth register */
91 GPIO_CFG4_REG, GPIO_CFG4_REG, GPIO_CFG4_REG, GPIO_CFG4_REG,
92 GPIO_CFG4_REG, GPIO_CFG4_REG,
93 /* GPIO 16 - 23 on the first strange EXTENDED register */
94 EXTENDED_GPIO1_REG, EXTENDED_GPIO1_REG, EXTENDED_GPIO1_REG,
95 EXTENDED_GPIO1_REG, EXTENDED_GPIO1_REG, EXTENDED_GPIO1_REG,
96 EXTENDED_GPIO1_REG, EXTENDED_GPIO1_REG,
97 /* GPIO 24 - 27 on the second strange EXTENDED register */
98 EXTENDED_GPIO2_REG, EXTENDED_GPIO2_REG, EXTENDED_GPIO2_REG,
99 EXTENDED_GPIO2_REG,
100};
101
102/* Maps 'basic' pins to relative offset from 0 per register */
103static int MSP_GPIO_OFFSET[] = {
104 /* GPIO 0 and 1 on the first register */
105 0, 0,
106 /* GPIO 2, 3, 4, and 5 on the second register */
107 2, 2, 2, 2,
108 /* GPIO 6, 7, 8, and 9 on the third register */
109 6, 6, 6, 6,
110 /* GPIO 10, 11, 12, 13, 14, and 15 on the fourth register */
111 10, 10, 10, 10, 10, 10,
112};
113
114/* Maps MODE to allowed pin mask */
115static unsigned int MSP_GPIO_MODE_ALLOWED[] = {
116 0xffffffff, /* Mode 0 - INPUT */
117 0x00000, /* Mode 1 - INTERRUPT */
118 0x00030, /* Mode 2 - UART_INPUT (GPIO 4, 5)*/
119 0, 0, 0, 0, 0, /* Modes 3, 4, 5, 6, and 7 are reserved */
120 0xffffffff, /* Mode 8 - OUTPUT */
121 0x0000f, /* Mode 9 - UART_OUTPUT/
122 PERF_TIMERA (GPIO 0, 1, 2, 3) */
123 0x00003, /* Mode a - PERF_TIMERB (GPIO 0, 1) */
124 0x00000, /* Mode b - Not really a mode! */
125};
126
127/* -- Bit masks -- */
128
129/* This gives you the 'register relative offset gpio' number */
130#define OFFSET_GPIO_NUMBER(gpio) (gpio - MSP_GPIO_OFFSET[gpio])
131
132/* These take the 'register relative offset gpio' number */
133#define BASIC_DATA_REG_MASK(ogpio) (1 << ogpio)
134#define BASIC_MODE_REG_VALUE(mode, ogpio) \
135 (mode << BASIC_MODE_REG_SHIFT(ogpio))
136#define BASIC_MODE_REG_MASK(ogpio) \
137 BASIC_MODE_REG_VALUE(0xf, ogpio)
138#define BASIC_MODE_REG_SHIFT(ogpio) (ogpio * 4)
139#define BASIC_MODE_REG_FROM_REG(data, ogpio) \
140 ((data & BASIC_MODE_REG_MASK(ogpio)) >> BASIC_MODE_REG_SHIFT(ogpio))
141
142/* These take the actual GPIO number (0 through 15) */
143#define BASIC_DATA_MASK(gpio) \
144 BASIC_DATA_REG_MASK(OFFSET_GPIO_NUMBER(gpio))
145#define BASIC_MODE_MASK(gpio) \
146 BASIC_MODE_REG_MASK(OFFSET_GPIO_NUMBER(gpio))
147#define BASIC_MODE(mode, gpio) \
148 BASIC_MODE_REG_VALUE(mode, OFFSET_GPIO_NUMBER(gpio))
149#define BASIC_MODE_SHIFT(gpio) \
150 BASIC_MODE_REG_SHIFT(OFFSET_GPIO_NUMBER(gpio))
151#define BASIC_MODE_FROM_REG(data, gpio) \
152 BASIC_MODE_REG_FROM_REG(data, OFFSET_GPIO_NUMBER(gpio))
153
154/*
155 * Each extended GPIO register is 32 bits long and is responsible for up to
156 * eight GPIOs. The least significant 16 bits contain the set and clear bit
157 * pair for each of the GPIOs. The most significant 16 bits contain the
158 * disable and enable bit pair for each of the GPIOs. For example, the
159 * extended GPIO reg for GPIOs 16-23 is as follows:
160 *
161 * 31: GPIO23_DISABLE
162 * ...
163 * 19: GPIO17_DISABLE
164 * 18: GPIO17_ENABLE
165 * 17: GPIO16_DISABLE
166 * 16: GPIO16_ENABLE
167 * ...
168 * 3: GPIO17_SET
169 * 2: GPIO17_CLEAR
170 * 1: GPIO16_SET
171 * 0: GPIO16_CLEAR
172 */
173
174/* This gives the 'register relative offset gpio' number */
175#define EXTENDED_OFFSET_GPIO(gpio) (gpio < 24 ? gpio - 16 : gpio - 24)
176
177/* These take the 'register relative offset gpio' number */
178#define EXTENDED_REG_DISABLE(ogpio) (0x2 << ((ogpio * 2) + 16))
179#define EXTENDED_REG_ENABLE(ogpio) (0x1 << ((ogpio * 2) + 16))
180#define EXTENDED_REG_SET(ogpio) (0x2 << (ogpio * 2))
181#define EXTENDED_REG_CLR(ogpio) (0x1 << (ogpio * 2))
182
183/* These take the actual GPIO number (16 through 27) */
184#define EXTENDED_DISABLE(gpio) \
185 EXTENDED_REG_DISABLE(EXTENDED_OFFSET_GPIO(gpio))
186#define EXTENDED_ENABLE(gpio) \
187 EXTENDED_REG_ENABLE(EXTENDED_OFFSET_GPIO(gpio))
188#define EXTENDED_SET(gpio) \
189 EXTENDED_REG_SET(EXTENDED_OFFSET_GPIO(gpio))
190#define EXTENDED_CLR(gpio) \
191 EXTENDED_REG_CLR(EXTENDED_OFFSET_GPIO(gpio))
192
193#define EXTENDED_FULL_MASK (0xffffffff)
194
195/* -- API inline-functions -- */
196
197/*
198 * Gets the current value of the specified pin
199 */
200static inline enum msp_gpio_data msp_gpio_pin_get(unsigned int gpio)
201{
202 u32 pinhi_mask = 0, pinhi_mask2 = 0;
203
204 if (gpio >= MSP_NUM_GPIOS)
205 return MSP_GPIO_NONE;
206
207 if (gpio < 16) {
208 pinhi_mask = BASIC_DATA_MASK(gpio);
209 } else {
210 /*
211 * Two cases are possible with the EXTENDED register:
212 * - In output mode (ENABLED flag set), check the CLR bit
213 * - In input mode (ENABLED flag not set), check the SET bit
214 */
215 pinhi_mask = EXTENDED_ENABLE(gpio) | EXTENDED_CLR(gpio);
216 pinhi_mask2 = EXTENDED_SET(gpio);
217 }
218 if (((*MSP_GPIO_DATA_REGISTER[gpio] & pinhi_mask) == pinhi_mask) ||
219 (*MSP_GPIO_DATA_REGISTER[gpio] & pinhi_mask2))
220 return MSP_GPIO_HI;
221 else
222 return MSP_GPIO_LO;
223}
224
225/* Sets the specified pin to the specified value */
226static inline void msp_gpio_pin_set(enum msp_gpio_data data, unsigned int gpio)
227{
228 if (gpio >= MSP_NUM_GPIOS)
229 return;
230
231 if (gpio < 16) {
232 if (data == MSP_GPIO_TOGGLE)
233 toggle_reg32(MSP_GPIO_DATA_REGISTER[gpio],
234 BASIC_DATA_MASK(gpio));
235 else if (data == MSP_GPIO_HI)
236 set_reg32(MSP_GPIO_DATA_REGISTER[gpio],
237 BASIC_DATA_MASK(gpio));
238 else
239 clear_reg32(MSP_GPIO_DATA_REGISTER[gpio],
240 BASIC_DATA_MASK(gpio));
241 } else {
242 if (data == MSP_GPIO_TOGGLE) {
243 /* Special ugly case:
244 * We have to read the CLR bit.
245 * If set, we write the CLR bit.
246 * If not, we write the SET bit.
247 */
248 u32 tmpdata;
249
250 custom_read_reg32(MSP_GPIO_DATA_REGISTER[gpio],
251 tmpdata);
252 if (tmpdata & EXTENDED_CLR(gpio))
253 tmpdata = EXTENDED_CLR(gpio);
254 else
255 tmpdata = EXTENDED_SET(gpio);
256 custom_write_reg32(MSP_GPIO_DATA_REGISTER[gpio],
257 tmpdata);
258 } else {
259 u32 newdata;
260
261 if (data == MSP_GPIO_HI)
262 newdata = EXTENDED_SET(gpio);
263 else
264 newdata = EXTENDED_CLR(gpio);
265 set_value_reg32(MSP_GPIO_DATA_REGISTER[gpio],
266 EXTENDED_FULL_MASK, newdata);
267 }
268 }
269}
270
271/* Sets the specified pin to the specified value */
272static inline void msp_gpio_pin_hi(unsigned int gpio)
273{
274 msp_gpio_pin_set(MSP_GPIO_HI, gpio);
275}
276
277/* Sets the specified pin to the specified value */
278static inline void msp_gpio_pin_lo(unsigned int gpio)
279{
280 msp_gpio_pin_set(MSP_GPIO_LO, gpio);
281}
282
283/* Sets the specified pin to the opposite value */
284static inline void msp_gpio_pin_toggle(unsigned int gpio)
285{
286 msp_gpio_pin_set(MSP_GPIO_TOGGLE, gpio);
287}
288
289/* Gets the mode of the specified pin */
290static inline enum msp_gpio_mode msp_gpio_pin_get_mode(unsigned int gpio)
291{
292 enum msp_gpio_mode retval = MSP_GPIO_UNKNOWN;
293 uint32_t data;
294
295 if (gpio >= MSP_NUM_GPIOS)
296 return retval;
297
298 data = *MSP_GPIO_MODE_REGISTER[gpio];
299
300 if (gpio < 16) {
301 retval = BASIC_MODE_FROM_REG(data, gpio);
302 } else {
303 /* Extended pins can only be either INPUT or OUTPUT */
304 if (data & EXTENDED_ENABLE(gpio))
305 retval = MSP_GPIO_OUTPUT;
306 else
307 retval = MSP_GPIO_INPUT;
308 }
309
310 return retval;
311}
312
313/*
314 * Sets the specified mode on the requested pin
315 * Returns 0 on success, or -1 if that mode is not allowed on this pin
316 */
317static inline int msp_gpio_pin_mode(enum msp_gpio_mode mode, unsigned int gpio)
318{
319 u32 modemask, newmode;
320
321 if ((1 << gpio) & ~MSP_GPIO_MODE_ALLOWED[mode])
322 return -1;
323
324 if (gpio >= MSP_NUM_GPIOS)
325 return -1;
326
327 if (gpio < 16) {
328 modemask = BASIC_MODE_MASK(gpio);
329 newmode = BASIC_MODE(mode, gpio);
330 } else {
331 modemask = EXTENDED_FULL_MASK;
332 if (mode == MSP_GPIO_INPUT)
333 newmode = EXTENDED_DISABLE(gpio);
334 else
335 newmode = EXTENDED_ENABLE(gpio);
336 }
337 /* Do the set atomically */
338 set_value_reg32(MSP_GPIO_MODE_REGISTER[gpio], modemask, newmode);
339
340 return 0;
341}
342
343#endif /* __MSP_GPIO_MACROS_H__ */
diff --git a/arch/mips/pmc-sierra/Kconfig b/arch/mips/pmc-sierra/Kconfig
index c437b8a8ab8c..bbd76082fa8c 100644
--- a/arch/mips/pmc-sierra/Kconfig
+++ b/arch/mips/pmc-sierra/Kconfig
@@ -24,6 +24,7 @@ config PMC_MSP7120_GW
24 select IRQ_MSP_CIC 24 select IRQ_MSP_CIC
25 select HW_HAS_PCI 25 select HW_HAS_PCI
26 select MSP_HAS_USB 26 select MSP_HAS_USB
27 select MSP_ETH
27 28
28config PMC_MSP7120_FPGA 29config PMC_MSP7120_FPGA
29 bool "PMC-Sierra MSP7120 FPGA" 30 bool "PMC-Sierra MSP7120 FPGA"
@@ -40,3 +41,12 @@ config HYPERTRANSPORT
40config MSP_HAS_USB 41config MSP_HAS_USB
41 boolean 42 boolean
42 depends on PMC_MSP 43 depends on PMC_MSP
44
45config MSP_ETH
46 boolean
47 select MSP_HAS_MAC
48 depends on PMC_MSP
49
50config MSP_HAS_MAC
51 boolean
52 depends on PMC_MSP
diff --git a/arch/mips/pmc-sierra/msp71xx/Makefile b/arch/mips/pmc-sierra/msp71xx/Makefile
index f26cab349c38..cefba7733b73 100644
--- a/arch/mips/pmc-sierra/msp71xx/Makefile
+++ b/arch/mips/pmc-sierra/msp71xx/Makefile
@@ -8,7 +8,7 @@ obj-$(CONFIG_PMC_MSP7120_GW) += msp_hwbutton.o
8obj-$(CONFIG_IRQ_MSP_SLP) += msp_irq_slp.o 8obj-$(CONFIG_IRQ_MSP_SLP) += msp_irq_slp.o
9obj-$(CONFIG_IRQ_MSP_CIC) += msp_irq_cic.o msp_irq_per.o 9obj-$(CONFIG_IRQ_MSP_CIC) += msp_irq_cic.o msp_irq_per.o
10obj-$(CONFIG_PCI) += msp_pci.o 10obj-$(CONFIG_PCI) += msp_pci.o
11obj-$(CONFIG_MSPETH) += msp_eth.o 11obj-$(CONFIG_MSP_HAS_MAC) += msp_eth.o
12obj-$(CONFIG_MSP_HAS_USB) += msp_usb.o 12obj-$(CONFIG_MSP_HAS_USB) += msp_usb.o
13obj-$(CONFIG_MIPS_MT_SMP) += msp_smp.o 13obj-$(CONFIG_MIPS_MT_SMP) += msp_smp.o
14obj-$(CONFIG_MIPS_MT_SMTC) += msp_smtc.o 14obj-$(CONFIG_MIPS_MT_SMTC) += msp_smtc.o
diff --git a/arch/mips/pmc-sierra/msp71xx/msp_eth.c b/arch/mips/pmc-sierra/msp71xx/msp_eth.c
new file mode 100644
index 000000000000..c584df393de2
--- /dev/null
+++ b/arch/mips/pmc-sierra/msp71xx/msp_eth.c
@@ -0,0 +1,187 @@
1/*
2 * The setup file for ethernet related hardware on PMC-Sierra MSP processors.
3 *
4 * Copyright 2010 PMC-Sierra, Inc.
5 *
6 * This program is free software; you can redistribute it and/or modify it
7 * under the terms of the GNU General Public License as published by the
8 * Free Software Foundation; either version 2 of the License, or (at your
9 * option) any later version.
10 *
11 * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
12 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
13 * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
14 * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
15 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
16 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
17 * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
18 * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
19 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
20 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
21 *
22 * You should have received a copy of the GNU General Public License along
23 * with this program; if not, write to the Free Software Foundation, Inc.,
24 * 675 Mass Ave, Cambridge, MA 02139, USA.
25 */
26
27#include <linux/init.h>
28#include <linux/kernel.h>
29#include <linux/ioport.h>
30#include <linux/platform_device.h>
31#include <linux/delay.h>
32#include <msp_regs.h>
33#include <msp_int.h>
34#include <msp_gpio_macros.h>
35
36
37#define MSP_ETHERNET_GPIO0 14
38#define MSP_ETHERNET_GPIO1 15
39#define MSP_ETHERNET_GPIO2 16
40
41#ifdef CONFIG_MSP_HAS_TSMAC
42#define MSP_TSMAC_SIZE 0x10020
43#define MSP_TSMAC_ID "pmc_tsmac"
44
45static struct resource msp_tsmac0_resources[] = {
46 [0] = {
47 .start = MSP_MAC0_BASE,
48 .end = MSP_MAC0_BASE + MSP_TSMAC_SIZE - 1,
49 .flags = IORESOURCE_MEM,
50 },
51 [1] = {
52 .start = MSP_INT_MAC0,
53 .end = MSP_INT_MAC0,
54 .flags = IORESOURCE_IRQ,
55 },
56};
57
58static struct resource msp_tsmac1_resources[] = {
59 [0] = {
60 .start = MSP_MAC1_BASE,
61 .end = MSP_MAC1_BASE + MSP_TSMAC_SIZE - 1,
62 .flags = IORESOURCE_MEM,
63 },
64 [1] = {
65 .start = MSP_INT_MAC1,
66 .end = MSP_INT_MAC1,
67 .flags = IORESOURCE_IRQ,
68 },
69};
70static struct resource msp_tsmac2_resources[] = {
71 [0] = {
72 .start = MSP_MAC2_BASE,
73 .end = MSP_MAC2_BASE + MSP_TSMAC_SIZE - 1,
74 .flags = IORESOURCE_MEM,
75 },
76 [1] = {
77 .start = MSP_INT_SAR,
78 .end = MSP_INT_SAR,
79 .flags = IORESOURCE_IRQ,
80 },
81};
82
83
84static struct platform_device tsmac_device[] = {
85 [0] = {
86 .name = MSP_TSMAC_ID,
87 .id = 0,
88 .num_resources = ARRAY_SIZE(msp_tsmac0_resources),
89 .resource = msp_tsmac0_resources,
90 },
91 [1] = {
92 .name = MSP_TSMAC_ID,
93 .id = 1,
94 .num_resources = ARRAY_SIZE(msp_tsmac1_resources),
95 .resource = msp_tsmac1_resources,
96 },
97 [2] = {
98 .name = MSP_TSMAC_ID,
99 .id = 2,
100 .num_resources = ARRAY_SIZE(msp_tsmac2_resources),
101 .resource = msp_tsmac2_resources,
102 },
103};
104#define msp_eth_devs tsmac_device
105
106#else
107/* If it is not TSMAC assume MSP_ETH (100Mbps) */
108#define MSP_ETH_ID "pmc_mspeth"
109#define MSP_ETH_SIZE 0xE0
110static struct resource msp_eth0_resources[] = {
111 [0] = {
112 .start = MSP_MAC0_BASE,
113 .end = MSP_MAC0_BASE + MSP_ETH_SIZE - 1,
114 .flags = IORESOURCE_MEM,
115 },
116 [1] = {
117 .start = MSP_INT_MAC0,
118 .end = MSP_INT_MAC0,
119 .flags = IORESOURCE_IRQ,
120 },
121};
122
123static struct resource msp_eth1_resources[] = {
124 [0] = {
125 .start = MSP_MAC1_BASE,
126 .end = MSP_MAC1_BASE + MSP_ETH_SIZE - 1,
127 .flags = IORESOURCE_MEM,
128 },
129 [1] = {
130 .start = MSP_INT_MAC1,
131 .end = MSP_INT_MAC1,
132 .flags = IORESOURCE_IRQ,
133 },
134};
135
136
137
138static struct platform_device mspeth_device[] = {
139 [0] = {
140 .name = MSP_ETH_ID,
141 .id = 0,
142 .num_resources = ARRAY_SIZE(msp_eth0_resources),
143 .resource = msp_eth0_resources,
144 },
145 [1] = {
146 .name = MSP_ETH_ID,
147 .id = 1,
148 .num_resources = ARRAY_SIZE(msp_eth1_resources),
149 .resource = msp_eth1_resources,
150 },
151
152};
153#define msp_eth_devs mspeth_device
154
155#endif
156int __init msp_eth_setup(void)
157{
158 int i, ret = 0;
159
160 /* Configure the GPIO and take the ethernet PHY out of reset */
161 msp_gpio_pin_mode(MSP_GPIO_OUTPUT, MSP_ETHERNET_GPIO0);
162 msp_gpio_pin_hi(MSP_ETHERNET_GPIO0);
163
164#ifdef CONFIG_MSP_HAS_TSMAC
165 /* 3 phys on boards with TSMAC */
166 msp_gpio_pin_mode(MSP_GPIO_OUTPUT, MSP_ETHERNET_GPIO1);
167 msp_gpio_pin_hi(MSP_ETHERNET_GPIO1);
168
169 msp_gpio_pin_mode(MSP_GPIO_OUTPUT, MSP_ETHERNET_GPIO2);
170 msp_gpio_pin_hi(MSP_ETHERNET_GPIO2);
171#endif
172 for (i = 0; i < ARRAY_SIZE(msp_eth_devs); i++) {
173 ret = platform_device_register(&msp_eth_devs[i]);
174 printk(KERN_INFO "device: %d, return value = %d\n", i, ret);
175 if (ret) {
176 platform_device_unregister(&msp_eth_devs[i]);
177 break;
178 }
179 }
180
181 if (ret)
182 printk(KERN_WARNING "Could not initialize "
183 "MSPETH device structures.\n");
184
185 return ret;
186}
187subsys_initcall(msp_eth_setup);